Eclipse Fujitsu Ten Speaker 512 User Manual

Owner's Manual  
Thank you for purchasing the Eclipse TD Speaker 512.  
Please read this Owner’s Manual before use.  
Be particularly sure to read the Important Safety Instructions section.  
Keep this Owner’s Manual together with the Warranty Certificate in a safe place for later reference.  
Important Safety Instructions  
Explanation of Graphical Symbols  
CAUTION  
RISK OF ELECTRIC SHOCK  
The lightning flash with arrowhead  
symbol, within an equilateral triangle,  
is intended to alert you to the  
presence of uninsulated "dangerous  
voltage" within the product's enclosure  
that may be of sufficient magnitude to  
constitute a risk of electric shock to  
persons.  
DO NOT OPEN  
CAUTION : TO REDUCE THE RISK OF  
ELECTRIC SHOCK, DO NOT REMOVE  
COVER (OR BACK). NO USER-SERVICEABLE  
PARTS INSIDE. REFER SERVICING TO  
QUALIFIED SERVICE PERSONNEL.  
The exclamation point within an  
equilateral triangle is intended to alert  
you to the presence of important  
operating and maintenance (servicing)  
instructions in the literature  
WARNING  
TO REDUCE THE RISK OF FIRE OR ELECTRIC  
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO  
RAIN OR MOISTURE.  
accompanying the appliance.  
CAUTION(for customers who concerned)  
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE  
OF PLUG TO WIDE SLOT FULLY INSERT.  
1. Read instructions  
shock may result. Do not place flower vases,  
potted plants, cups, cosmetics, drugs, containers  
holding liquids, or small metal objects on or near  
the unit. Do not place any objects on the unit and  
do not insert or drop metal,combustible objects or  
liquids into the unit as such actions can cause fire  
or electric shock. If liquid or foreign objects enter  
the unit,disconnect immediately since continued  
use may result in fire or electric shock. Do not  
place the unit on tuners, audio decks or other  
electric equipment. Do not use the unit as a step  
or seat. The unit may tip over and cause damage  
or injury. Consult a company customer service  
facility for interior inspection, adjustment or repair.  
7. Where not to use unit.  
All safety and operating instructions should be  
read before operating unit.  
2. Follow instructions  
All operating and other instructions should be  
followed.  
3. Retain instructions  
The safety and operating instructions should be  
retained for future reference.  
4. Warnings  
All warnings on the unit and in the operating  
instructions should be adhered to.  
5. Power supply  
Power supply should be operated only from the  
power source indicated on the marking label. If  
you are not sure of the type of power supply to  
your home, consult your product dealer or local  
power company.  
Do not use the unit in bathrooms, areas exposed  
to rain or snow, on the shore, near water or in  
humid conditions. Do not place the unit in unstable  
locations, in kitchens, near humidifiers, or in any  
location with likely exposure to smoke or steam.  
6. General care of unit  
Do not open or modify the unit as fire or electric  
3 -  
Do not place the unit in direct sunlight, near  
heating equipment or close to open flames. Fire  
accident or malfunction may result. Do not place  
the unit in locations exposed to cold air or direct  
draft. Condensation, leakage current or thermal  
damage may result. Do not use the unit in dusty or  
dirty locations. Decreased heat ventilation can  
cause thermal damage or fire.  
of the plug, wipe the plug with a dry cloth after  
disconnection. Continued use may cause fire or  
electric shock.  
12. Danger signs  
If you notice a strange noise, smoke, unusual  
odour or other abnormal condition, shut off the  
unit, disconnect the power cord from the outlet  
and have the unit inspected. Continued use may  
result in fire or electric shock.  
8. Unit heat  
The bottom and sides of the unit can heat up  
during use and should not be touched. Burns may  
result. Only connect or disconnect speaker cables  
after the power supply has cooled down.  
13. Electric storms  
During electrical storms disconnect the unit and  
avoid contact with the antenna and power cord.  
Lightning can cause fire, electric shock, and  
malfunction.  
9. Moving the unit  
When moving the unit, shut off power to all  
connected equipment, and disconnect power  
cords, connection cables, speaker cables and  
other wires. Moving the unit while cables are  
connected can cause damage to cables, fire or  
electric shock. The unit is heavy and care should  
be taken when unpacking, moving or lifting.  
Manufacturing also creates sharp areas on the  
unit; use thorough care in handling.  
14. Internal temperature rise  
To avoid internal temperature rise when installing  
the unit, leave space between the unit and walls  
or other equipment. When installed in a rack or  
similar fixture, leave a 10cm (4") or larger gap on  
top and at sides since internal temperature rise  
can result in fire. The unit is provided with  
ventilation holes to prevent internal temperature  
rise. Blockage of these holes decreases  
ventilation and can result in fire. Note the  
following.  
Because the volume knob can be separated  
from the amplifier, never hold the volume knob  
when moving the amplifier.  
Do not place the unit in a poorly ventilated area  
Do not place the unit on carpeting or on bedding  
Do not obstruct the ventilation holes  
10. Power cord  
Only use the power cord supplied and do not  
bend, twist,modify it for repair, or pin it under the  
unit. Heavy objects, heat or tension may also  
damage the power cord and cause fire or electric  
shock. When disconnecting the power cord from  
an outlet, do not pull the cord. Pulling on the cord  
can damage it and cause fire or electric shock. Do  
not touch the power cord with wet hands. Do not  
place the power cord near heating equipment and  
do not use the unit. If the plug fits loosely in an  
electric outlet or the plug or cord is hot. If the cord  
is damaged, replace it as continued use may  
result in fire or electric shock.  
Do not tilt the unit or turn upside down  
15. Extended non-use  
If the unit is likely to be unused for an extended  
period, shut off power and disconnect from power  
supply.  
16. Volume Adjustment  
If abnormal noise is produced during play at high  
volume, reduce the volume level. Distorted sound  
can cause overheating of speakers and amplifier.  
Before switching power supply on, set the  
amplifier volume to minimum. Sudden, loud noise  
can cause damage to hearing.  
11. Unit plug  
17. Connecting TV/other audio equipment  
When connecting a TV or other audio equipment,  
always shut off power, read the operating manual  
for each device and follow the instructions for  
connection. Use only designated cables.  
Use of non-designated cables or extension cables  
can cause heat production, burns, and fire.  
18. Antenna  
Insert the plug into an outlet all the way to its  
base. Incomplete insertion can cause heat  
production, and dust build-up can cause fire.  
Contact with the prongs of the plug can also  
cause electric shock.  
Do not connect the unit to an outlet where the  
connection is loose even when the plug is inserted  
all the way to its base. Do not use the unit if the  
plug is hot. Heat production can cause fire.  
If dust or metal accumulates on or near the prongs  
An outdoor antenna should be located away from  
power lines.  
4 -  
19. Maintenance.  
Before undertaking maintenance disconnect from  
power supply. Have the interior of the unit cleaned  
approximately once a year by qualified personnel.  
Accumulated dust inside and long intervals  
without cleaning can cause fire or malfunction.  
Before cleaning this product make sure that the  
power is turned off and the power cord is  
disconnected from the wall outlet. Clean with a  
soft cloth. If the product is particularly dirty,  
moisten the cloth and wring out before use.  
Complete by wiping with a soft, dry cloth. Do not  
use liquid solvents such as alcohol or thinner to  
clean this product, as such chemicals can damage  
the cabinets.  
20. Servicing  
The unit should be serviced by qualified personnel  
when:  
The power-supply cord or plug has been  
damaged, or  
Objects or liquid have entered the unit, or  
The unit has been exposed to rain; or  
The unit is malfunctioning, or  
The unit has been dropped or the cabinet has  
been damaged.  
21. Children  
Use particular care in households where children  
are present.  
22. Temporary Fault  
If this product receives a strong external shock  
(such as from an impact, static electricity or a  
power surge due to lightning), or if this product is  
used incorrectly, it may stop working properly.  
In such cases, press the power button to turn the  
power off and then back on again, and check if  
this product is working normally.  
5 -  
Notes on Use  
Volume Setting  
Before switching on, minimize the volume.  
Sudden large sound output may damage  
the speaker.  
Volume Etiquette  
To avoid disturbance in your neighborhood,  
enjoy your unit at an appropriate volume.  
Remember that particularly at night, even  
low volume carries into surrounding areas.  
Help to maintain a pleasant living  
environment.  
Speaker Cord Connection  
Always connect speaker systems with the  
power disconnected.  
If a speaker cable is inadvertently shorted,  
the protection circuit in the amplifier will  
operate, and audio output will stop  
temporarily.  
In this event, disconnect the power cord  
from the outlet, correct the shorted area  
and reconnect the power cord to the outlet.  
6 -  
Part Names and Functions/Connections  
①, ②Speaker Input Terminals  
When connecting the speakers, insert the  
ends of the speaker cables so that they  
do not touch neighbouring terminals.  
Speaker cable  
7 -  
Maintenance / Specifications  
Maintenance  
Specifications  
Before maintaining the unit, ensure that  
the power is off and the power cord  
removed.  
Specifications and appearance are subject  
to change without prior notification.  
Remove any dirt from the unit by lightly  
wiping with a soft cloth.  
Diameter:  
φ12cm  
Magnet Insulation: EIAJ Grade I  
Type:  
Bass ref/box  
If it is particularly dirty, use a slightly  
damp cloth to wipe it down, then use a  
dry cloth.  
Do not use gasoline or thinners, etc. on this  
unit as it may damage the cabinet.  
Input Resistance  
:
Rated 30W / Maximum 60W  
(with box)  
Impedance:  
Dimensions:  
Weight:  
6  
286mm(W)x363mm(D)x373mm(H)  
Approx. 12kg  
Gasoline  
Thinner  
Problems during Operation of the Unite  
During operation, the unit may stop  
working properly if it suffers from significant  
external disruption (impact shock, static  
electricity, voltage fluctuation caused by  
lightning, etc.) or is operated incorrectly.  
In this situation, turn the amplifier  
power to switch to the “Off” position.  
Turn it back on again and check if normal  
operation has resumed.  
(If a problem persists, please contact our  
Service Centre)  
8 -  
Warranty and After-Service  
Warranty Certificate (included)  
After reading the contents of the  
Warranty Certificate, put it away in a safe  
place.  
When Requesting a Repair  
Within warranty period  
Present your Warranty Certificate  
Repairs will be carried out in accordance  
with the conditions on the Warranty  
Certificate  
Warranty period  
The warranty period is one year from  
purchase date. Some costs may be  
incurred even within the warranty period,  
so please read your Warranty Certificate  
carefully.  
Outside the warranty period  
When a repair is possible, it will be  
carried out upon your instruction and at  
your expense.  
Life-span of Serviceable Parts  
The life-span of the serviceable parts in  
this product is a period of 8 years from  
the date of manufacture. This is the  
period stipulated by the Ministry of  
International Trade and Industry.  
‘Serviceable parts’ are defined as those  
parts which are necessary to ensure the  
functionality of the product.  
Repairs and Enquiries  
See “Customer Enquiries” Section on the  
included sheet.  
After many years of use, check your audio equipment;  
RegularChecks  
An excessively hot power cord or plug  
A burning smell  
Are any of  
these  
conditions  
present?  
Deep cuts or abnormalities of the power cord  
Any other damage or abnormalities  
Stop using the unit  
To prevent damage and accidents, turn off the power switch,  
remove the power cord and request a service inspection.  
For inspection and repair costs, please check with our Service Centre.  
9 -  
10 -  

Blaupunkt MODENA RD 148 User Manual
Canon 2685B001 User Manual
Canon Camera Lens EF Lenses User Manual
Canon PUB DIE 310B HG21 User Manual
Canon XL H1 User Manual
Casio Scientific Calculator FX 82SOLAR User Manual
DXG Technology DXG 587V HD User Manual
Epson Camera Accessories 800 User Manual
Havis Shields C 3330 800 MW 800 User Manual
JVC CS V425 User Manual