XDVD9101
INSTALLATION/OWNER’S MANUAL
DVD Multimedia Receiver with 7” Touch Screen Display
Safety Notes:
The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature
to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the
parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.
XDVD9101 PREPARATION
Table of Contents
Page
Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety Information/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
4
Preparation/Mounting/Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7
Remote Control Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
Control Locations - Monitor Closed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-11
Control Locations - Monitor Open . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Control Locations - Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-14
General Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-17
Main Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-22
Screen Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-26
AM/FM Tuner Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-30
Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-38
DVD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39-42
CD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43-46
MP3/WMA/JPG Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47-50
USB Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51-54
Media Compatibility Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-57
iPod Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58-63
Auxiliary Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Rear Camera Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
2
XDVD9101 PREPARATION
WARNING
Upon installation of this Monitor/DVD player (“unit”) into a vehicle, the driver of the vehicle
must not operate this unit by watching videos or playing video games while driving.
Failure to follow this instruction could lead to driver distraction which could result in
serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or
property damage.
Several states prohibit the installation of monitors/DVD players if the screen is visible from
the driver’s seat. If you reside in a jurisdiction which has enacted such a law, this unit
must not be installed so that the screen is visible from the driver’s seat. When installing
this unit in the front console/dashboard, the unit must be positioned so that it is facing the
front passenger seat only. Failure to follow this instruction could lead to driver distraction
which could result in serious injury or death to the vehicle’s occupants or persons outside
the vehicle and/or property damage.
This unit is designed so that it may be operated only when the vehicle is in “Park” and the
parking brake is fully engaged. To this end, this unit includes a parking brake lock-out
feature which prohibits the unit from operating if the vehicle is not in “Park” and/or the
parking brake is not fully engaged. When installing this unit, the installer must connect
the parking brake detect wire (“Yellow-Blue Lead”) to the parking brake mechanism in
order to make the parking brake lock-out feature operable. DO NOT simply ground the
parking brake detect wire to a metal portion of the vehicle. Failure to properly install
the parking brake lock-out feature could lead to driver distraction which could result in
serious injury or death to the driver’s occupants or persons outside the vehicle and/or
property damage.
Once the parking brake lock-out feature is installed, the owner/user must not attempt to
disrupt/neutralize the parking brake lock-out feature by (a) partially engaging the parking
brake and/or (b) purchasing/using any device or unit designed to send necessary brake
signals to the unit. Failure to follow these instructions could lead to driver distraction
which could result in serious injury or death to the driver’s occupants or persons outside
the vehicle and/or property damage.
When operating this unit, keep the unit’s volume level low enough so that the vehicle’s
occupants can hear traffic-related sounds such as police and emergency vehicles.
Failure to follow this instruction could lead to driver distraction which could result in
serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or
property damage.
3
XDVD9101 OPERATION
Safety Information
Please read all instructions carefully before attempting to install or operate.
Due to its technical nature, it is highly recommended that your DUAL XDVD9101 is installed by a professional
installer or an authorized dealer. This product is only for use in vehicles with 12VDC negative ground only.
Safety Notes:
The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to
prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking
brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.
To prevent damage or injury:
1. Make sure to ground the unit securely to the vehicle chassis ground.
2. Do not remove the top or bottom covers of the unit.
3. Do not install the unit in a spot exposed to direct sunlight or excessive heat or the possibility of water splashing.
4. Do not subject the unit to excessive shock.
5. When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may
cause the unit to malfunction.
6. To prevent short circuits when replacing a fuse, disconnect the wiring harness first.
7. Use only the provided hardware and wire harness.
8. You cannot view video while the vehicle is moving. Find a safe place to park and engage the parking brake.
9. If you experience problems during installation, consult your nearest DUAL dealer.
10.If the unit malfunctions, reset the unit as described on page 10 first. If the problem still persists, consult your
nearest DUAL dealer or call tech assistance @ 1-866-382-5476.
11.To clean the monitor, wipe only with a dry silicone cloth or soft cloth. Do not use a stiff cloth, or volatile solvents
such as paint thinner and alcohol. They can scratch the surface of the panel and/or remove the printing.
12.When the temperature of the unit falls (as in winter), the liquid crystal inside the screen will become darker
than usual. Normal brightness will return after using the monitor for a while.
Additional Notes:
1.When extending the ignition, battery or ground cables, make sure to use automotive-grade cables or other
cables with an area of 0.75mm (AWG 18) or more to prevent voltage drops.
2.Do not touch the liquid crystal fluid if the LCD is damaged or broken. The liquid crystal fluid may be hazardous
to your health or fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap
immediately.
This device complies with part 15 of the FCC rules and regulations.
Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may cause undesired operation.
4
XDVD9101 INSTALLATION
Preparation
Please read entire manual before installation.
Before You Start
• Disconnect negative battery terminal. Consult a qualified technician for instructions.
• Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it
would be subject to dust, dirt or excessive vibration.
Getting Started
• Remove 3 transit screws located on top of the unit.
• Insert the supplied keys into the slots as shown, and slide the unit out of the mounting sleeve.
• Install mounting sleeve into opening, bending tabs to secure.
• Connect wiring harness and antenna as shown on pages 6-7. Consult a qualified technician if you are unsure.
• Certain vehicles may require an installation kit and/or wiring harness adapter (sold separately).
• Test for correct operation and slide unit into mounting sleeve to secure.
• Snap trim ring into place.
Mounting sleeve opening dimensions
7-3/16” x 2-1/16” (183 mm x 53 mm)
TYPICAL FRONT-LOAD DIN MOUNTING METHOD
5
XDVD9101 INSTALLATION
Wiring Diagram - Inputs/Outputs
Wiring Notes:
Subwoofer output
The SUBWOOFER audio output (Blue RCA) is active in all audio modes and must be connected to an external
amplifier.
Rear view camera
A rear view camera (not included) can be used with the CAMERA input. Refer to page 64 for details.
Need help?
Call our Technical Service Hotline, 1-866-382-5476.
6
XDVD9101 INSTALLATION
Wiring Diagram - Optional A/V Connections
7
XDVD9101 OPERATION
IR Remote Preparation
To first use the IR Remote control,
you must first pull the battery
insulation tape out
Notes:
•
Remove the battery if the remote will
not be used for a month or longer
•
Remove and dispose of battery properly
To insert or replace the battery:
Remove the battery holder
Remove the battery from the
battery holder
Install the new battery
Make sure to keep the (+) side up
Insert the battery holder
CAUTION!!!
Do not store battery with metallic
objects or materials
•
8
XDVD9101 OPERATION
Control Locations - Monitor Closed
1
2
3
4
5
16
15
12 11
7
6
14
13
10
9
8
Display
Channel/Chapter/Track Down/Fast Reverse
Disc-In Indicator
1
2
3
4
5
6
7
8
9
Secondary LCD
Open/Close Monitor
3.5mm A/V Input
USB Input
10
11
12
13
14
15
Infrared Sensor
Band/Disc Stop
Mode
Reset
Mute/Loudness
Channel/Chapter/Track Up/Fast Forward
Play/Pause
Power/Volume/EQ
16 Eject
Secondary LCD Information
1
2
3
4
5
9
6
7
12
11
10
8
EQ indicator
Song title indicator
Artist name indicator
Album name indicator
Main information display
Stereo indicator
1
2
3
4
5
6
7
8
Loudness indicator
Distance indicator
Intro indicator
9
10
11
12
Random indicator
Repeat indicator
Disc-in indicator
Note: Secondary LCD only functions when TFT monitor is closed.
9
XDVD9101 OPERATION
Control Functions - Monitor Closed
Display
When the monitor is closed, press DISP to toggle display between
information available for the current mode such as clock, frequency, track or
chapter information.
Secondary LCD
Open Monitor
Additional LCD for system information while monitor is closed.
Press OPEN to open or close the monitor. Be careful not to not touch
or obstruct the monitor movement during the open/close sequence, or
permanent damage could occur.
3.5mm A/V Input
USB Input
Reset
Connect external devices to this 3.5mm auxiliary audio/video input.
Insert USB flash drive to play MP3, WMA or JPEG files.
To resolve abnormal operation or if the unit is inoperable, press the
RESET button located to the left of the USB input on the front panel. The unit
will reset the main processor to the default settings.
Note: Use the tip of a pen to access the reset button. To restore the factory
default settings, refer to page 19.
Channel/Chapter/Track Up
Fast Forward
Press to select the next channel/chapter/track for playback.
Press and hold to manual tune up or fast forward.
Play/Pause
In disc mode, press once for PAUSE, and "PAUSE" will appear in the display.
Press again to resume PLAY.
Channel/Chapter/Track Down
Fast Reverse
Press to select the previous channel/chapter/track for playback.
Press and hold to manual tune down or fast reverse.
Disc-in Indicator
Infrared Sensor
Red = Disc inserted, Blue = No disc.
Point the remote control towards the infrared sensor to control various
functions of the unit.
Band
Mode
Press BAND to increment from FM1, FM2, ] AM. While in disc mode, press
BAND momentarily to stop disc play.
Press MODE to select between Tuner, Disc (which includes DVD and CD
playback), iPod, USB, Auxiliary 1 and Auxiliary 2 inputs. Each time the MODE
button is pressed the next mode is chosen. Modes of operation are indicated
on the OSD or the secondary LCD. iPod and USB flash drive (optional) must
be connected/inserted to appear in the MODE selection string.
Mute
Eject
Press MUTE to silence audio output. "MUTE" will flash in the secondary
display. Press MUTE again to restore audio at previous volume level. Press
and hold MUTE to toggle the Loudness function On or Off.
Press
once to eject disc.
10
XDVD9101 OPERATION
Control Functions - Monitor Closed
Power
Momentarily press PWR or any other button (except EJECT) to turn the unit on.
Press PWR for more than 3 seconds to turn the unit off.
Volume
Turn the rotary to adjust the volume level lower or higher (0-46). The current
volume level will be displayed on the secondary LCD when the monitor is
closed. Turning the rotary while the volume is muted will cancel the mute
function.
EQ Preset
Press the volume knob momentarily to select between Flat, Classic, Pop, Rock
or User EQ presets.
Caution
• Due to its highly technological design, the XDVD9101 faceplate is NOT
removable. Do not attempt to remove the faceplate.
• Upon installation, do not attempt to move the monitor by hand. Use the
or
buttons, the OPEN button on the front panel or the remote control.
• The unit will stop if it encounters any obstacles during the open/close
sequence. If this occurs, remove the obstacle and press OPEN again to
resume the monitor open/close sequence.
11
XDVD9101 OPERATION
Control Locations and Functions - Monitor Open
1
Close Monitor
1
2
3
4
Screen Angle Up
Info/Picture
Screen Angle Down
4
3
2
Close Monitor
Press CLOSE to open or close the monitor. Be careful not to not touch or obstruct the
monitor movement during the open/close sequence, or permanent damage could
occur.
Info/Picture
Press to display DVD disc information in DVD mode. Holding this button for 3 seconds
brings up the Brightness setting, which can be adjusted by turning the rotary encoder
or by pressing the t or u buttons on the main remote control.
Screen Angle Up
Screen Angle Down
Monitor Notes
Press momentarily to adjust the angle of the screen upwards. Press and hold to slide
the monitor inwards.
Press to adjust the angle of the screen downwards. Press and hold to slide the
monitor outwards.
• The angle can also be manually selected via the screen setup menu.
• The color of the LCD monitor varies between viewing angles. Select the angle with
the most optimum view for your location.
• The last position of the monitor can be saved in memory. When “TFT Auto Open”
is set to "On" in the Main Setup menu, the monitor will return to its last position
automatically the next time the unit is turned on.
12
XDVD9101 OPERATION
Control Locations - Remote
3
1
2
4
5
6
8
7
11
15
19
9
10
14
18
22
26
12
16
20
13
17
21
25
23
27
31
35
24
28
32
29 30
34
33
36
40
39
38
37
Power
Key #9
Escape
Search
Root
1
2
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
Mute/Loudness
Open/Close
Mode
Repeat
Chapter/Track/Seek Tune Down
Chapter/Track/Seek Tune Up
Fast Reverse/Manual Tune Down
Fast Forward/Manual Tune Up
Zoom
3
Key #0/DVD Setup
Audio Select
Menu
4
Volume Up
Key #1
5
6
Key #2
4-Way - Up
Play
7
Key #3
Audio
8
Volume Down
Key #4
Band/Stop
4-Way - Left
OK
Angle/Music mode (iPod only)
Sub-Title/Video mode (iPod only)
9
10
11
12
13
14
15
Key #5
Key #6
4-Way - Right
Repeat A-B
Title Menu
4-Way - Down
Info
Key #7
Key #8
* The remote control uses one 3 volt Lithium CR2025 battery. For best performance, replace only with CR2025 or equivalent.
13
XDVD9101 OPERATION
Control Functions - Remote
Power
Mute
Press once to turn the unit on, press again to turn unit off.
Press once to MUTE audio; press again to return audio. Press and hold to
activate Loudness On/Off.
Open
Press once to open monitor; press again to close the monitor.
Press once to incrementally select desired source.
Increase VOLUME.
Mode
Volume Up
Keys 0-9
Direct access chapter/track/preset stations 1 ~ 9.
Decrease VOLUME.
Volume Down
Info
Displays DVD information.
Escape
Exit current menu.
Search
Search function in Disc and iPod modes.
Enter AUDIO Setup mode.
Audio Select
Menu
Enter the MAIN system menu.
4-Way-Up/Down/Left/Right
Navigating system and DVD menus.
Play
Press to pause/begin playback.
Band/Stop
Press to increment BAND or to STOP while in disc mode.
Press to confirm settings.
OK
Repeat A-B
Repeat playback from time frame A to time frame B.
Enters the title menu of the DVD.
Title Menu
Root Menu
Enters the main menu of the DVD.
Repeat
Repeats playback of current chapter/track or folder.
Selects the previous chapter/track/station for playback.
Selects the next chapter/track/station for playback.
Fast reverses the disc/USB/iPod content, manual tune down.
Fast forwards the disc/USB/iPod content, manual tune up.
Zooming in/out on an image.
Chapter/Track/Seek Tune Down
Chapter/Track/Seek Tune Up
Fast Reverse/Manual Tune Down
Fast Forward/Manual Tune Up
Zoom
Audio
Change the audio language for DVD disc playback.
Angle
Selects between different angles (when available) for a DVD scene/Selects iPod
Audio mode.
Sub-Title
Language selection for subtitle/Selects iPod Video mode.
14
XDVD9101 OPERATION
General Operation
Power On/Off
Momentarily press PWR or any other button (except EJECT) to turn the unit on.
Hold for 3 seconds to turn the unit off.
Mute
Press MUTE to silence the audio; will appear in the OSD (On Screen Display).
Press MUTE again to cancel.
Loudness
Mode
Press LOUD on the OSD to turn the Loudness on/off. Pressing and holding the
MUTE button on the front panel or remote will also turn the Loudness on/off.
Press MODE to select between Tuner, Disc (which includes DVD and CD
playback), iPod, USB, Auxiliary 1 and Auxiliary 2 inputs. Modes of operation are
indicated on the OSD On Screen Display). iPod and USB flash drive (optional)
must be connected/inserted to appear in the MODE selection string.
Optional Mode Selection
Volume
Press MENU at the top left corner of the screen to display the OSD main menu.
Press Tuner, Disc, iPod, USB, AV/1, AV/2 or Camera in the MAIN menu page to
select the desired source.
Turn the rotary or use the volume t or u to adjust the volume level lower or
higher (0-46). The current volume level will be displayed on the secondary LCD
when the monitor is closed or on the LCD (to the right of the volume icon
) when the monitor is open. Turning the rotary while the volume is muted
will cancel the mute function.
Audio Setup
(from OSD)
From Tuner, Disc (CD only), iPod or USB mode, touch EQ on the OSD or
press the rotary momentarily to enter the Audio Setup menu. Adjust audio
parameters by pressing the desired level you wish to change. Operation will
return back to previous mode after 15 seconds of inactivity or by pressing the
RETURN arrow in the top right corner.
Audio Setup
(from remote)
Press the SEL button. Press the p or q buttons on the remote to select an
item to be adjusted. Press t or u to decrease (-) or increase (+) the current
level. Press RETURN on the OSD or the ESC button on the remote control to exit
the audio control menu.
Note: The Bass and Treble levels are only adjustable when EQ is set to "User”
mode. The Loud function compensates for deficiencies in sound ranges at low
levels. When the Loud function is on, LOUD:On is displayed in the OSD.
15
XDVD9101 OPERATION
General Operation
Info
Press INFO momentarily to display DVD disc information.
Monitor Brightness
Press and hold INFO for 3 seconds to change monitor BRIGHTNESS.
Turn the rotary Q or P to adjust to desired level.
(0 minimum/20 maximum; 10 is default).
Color Setup
When a video source is connected to the front or rear auxiliary inputs, press
INFO for more than 2 seconds to adjust COLOR SETUP during video play.
Press
or
to step to the desired menu option:
COLOR SETUP
Sharpness
Color
Contrast
Brightness
Tint
10
10
10
10
10
L
Sharpness
Color
Turn the rotary Q or P to adjust the sharpness.
(0 minimum/+15 maximum).
Turn the rotary Q or P to adjust the color.
(0 minimum/+20 maximum).
Contrast
Brightness
Tint
Turn the rotary Q or P to adjust the contrast.
(0 minimum/+20 maximum).
Turn the rotary Q or P to adjust the brightness.
(0 minimum/+20 maximum).
Turn the rotary Q or P to adjust the tint.
(0 minimum/+20 maximum).
Note: A video signal must be present in order to access the COLOR SETUP
menu.
16
XDVD9101 OPERATION
General Operation - Main Menu
1
2
3
4
10
9
8
7
6
5
Main Menu Access There are two methods to access the MAIN menu:
•
•
Press MENU button on the remote control.
Touch MENU or the upper left corner of the touch screen from any mode.
Touch Access Buttons
1) Touch to access AM/FM TUNER mode.
2) Touch to access CD/DVD mode (CD/DVD must be inserted).
3) Touch to access iPod mode (optional iPod must be connected to activate).
4) Current time is displayed.
5) Touch to access AUXILIARY A/V2 INPUT mode.
6) Touch to access AUXILIARY A/V1 INPUT mode.
7) Touch to access USB mode (optional USB flash drive must be inserted).
8) Touch to access CAMERA mode (optional camera must be connected).
Note: If optional camera isn't connected, "No Signal Detected" will be displayed.
9) Touch to access SCREEN SETUP menu.
10) Touch to access MAIN SETUP menu.
17
XDVD9101 OPERATION
Main Setup - Menu
Main Setup Menu
Page 1
•
•
•
Press MAIN SETUP icon to access the Main setup mode.
Select desired parameter you wish to change.
Page will return back to previous screen after 15 seconds of inactivity or
by pressing the RETURN arrow in the top right corner.
Press the PAGE DOWN icon to access Main Setup page 2.
•
MAIN Setup Menu matrix - page 1
Settings
Default
USA
Options
Function
USA
S-Amer1
S-Amer2
Europe
Tuner
Select appropriate tuner frequency spacing for your area
See adjusting the clock on page 21 for more details
:
:
Clock
00 00
00 00
:
Clock Mode
12Hr
12Hr
24Hr
Off
3 32 (example of 12 hour time setting)
:
15 32 (example of 24 hour time setting)
Beep
Off
Disables confirmation beep
Enables confirmation beep
Normal Image
On
Camera Image
Normal Normal
Reverse
Mirror camera input image 180 degrees
18
XDVD9101 OPERATION
Main Setup - Menu
Main Setup Menu
Page 2
•
•
•
•
Press MAIN SETUP icon to access the Main setup mode.
Press the PAGE DOWN icon to access Main Setup page 2.
Select desired parameter you wish to change.
Page will return back to previous screen after 15 seconds of inactivity or by
pressing the RETURN arrow in the top right corner.
•
Press the PAGE UP icon to access Main Setup page 1.
MAIN Setup Menu matrix - page 2
Settings
Default
Off
Options
Function
On
TFT panel will automatically open when ACC is turned on
TFT panel will not auto open when ACC is turned on
TFT will only open/close when OPEN button is pressed
Must enter password to turn anti-theft on or off
TFT Auto Open
Off
Manual
----
On
Anti-theft Code
Anti-theft
0000
Off
System will require a password if main battery power is
removed
Off
No password will be required if main battery power is
removed
Reset Unit
Yes
Are you sure?
Yes/No
Load all factory parameters to their original settlings
Notes: This will not reset the anti-theft password
Default anti-theft password is 0000
19
XDVD9101 OPERATION
Main Setup - Adjusting Radio Frequency
Adjusting Radio Frequency
1
Step 1 Touch MENU at the top left corner of screen.
2
Step 2 Touch MAIN SETUP icon.
3
Step 3 Touch USA.
5
4
Step 4 Touch the setting for your region.
Step 5 Touch RETURN to exit.
20
XDVD9101 OPERATION
Main Setup - Adjusting the Clock
12Hr Clock Mode
1
Step 1
Step 2
Step 3
Touch MENU at the top left corner of screen.
2
Touch MAIN SETUP icon.
3
3) Touch 00:00 area in the CLOCK row.
6
4
OK
5
Steps 4-6
4) When keypad appears, enter HOURS, followed by MINUTES.
5) When finished, touch OK.
6) Touch RETURN to exit.
For 24Hr format, select 24Hr from CLOCK MODE, then follow steps 1-6.
21
XDVD9101 OPERATION
Main Setup - Setting the Anti-theft code
The default Anti-theft password
is 0000 and is turned off by
default. To turn this feature on,
follow the steps below.
CAUTION!! This will lock your
unit from operating if battery
power is disconnected.
1
2
Step 1 & 2 1) Touch MENU.
2) Touch MAIN SETUP icon.
4
3
Step 3 & 4 3) Touch down arrow icon.
4) Touch ****.
O
6
5
Step 5 & 6 5) Enter 0000, then press OK.
6) Set new 4-digit password,
then press OK.
Note:
It is recommended
that you choose your
own 4-digit password
carefully, write it
down somewhere
and keep in a safe
location. In the event
you ever lose or
7
8
7) Touch Off.
8) Touch On.
Step 7 & 8
10
forget your password,
call our technical
support hot-line at
1-866-382-5476 for
support in unlocking
the system.
9
Step 9 & 10
9) Enter new 4-digit password (created in step 6), then press OK.
10) Touch RETURN to exit.
22
XDVD9101 OPERATION
Screen Setup - Menu
Screen Setup Menu
•
From the main menu, press SCREEN SETUP icon to access the SCREEN
setup mode.
•
•
Select desired parameter you wish to change.
Page will return back to previous screen after 15 seconds of inactivity or by
pressing the RETURN button.
SCREEN Setup Menu matrix
Settings
Default
Options
Function
Brightness
10
(OSD)
0 - 20
(OSD)
Press t or u on the remote, then press ENTER to adjust the
Brightness to the desired setting. Brightness can also be
adjusted using the Brightness + and - buttons.
Screen Tilt
TS Calibrate
Version
1
1 - 4
Select 1 to 4 to adjust the default tilt angle of the screen
Calibration Touch Calibration to enter the Touch Screen calibration mode
Software version of unit
23
XDVD9101 OPERATION
Screen Setup - Setting TFT Brightness
This will set the default setting
for the TFT display brightness.
This can also be set by pressing
the INFO button on the front TFT
panel for more than 3 seconds,
then turning the rotary to adjust
brightness level.
1
Step 1
1) Touch MENU at the top left corner of screen.
2
2) Touch SCREEN SETUP icon.
Step 2
3
3) Touch [-] to reduce brightness.
Step 3
5
4
4) Touch [+] to increase brightness.
Step 4
Step 5
0 - 20 is possible
Default = 10
5) Touch RETURN to exit.
24
XDVD9101 OPERATION
Screen Setup - Setting TFT Angle
Set for best viewing angle for
your vehicle
1
1) Touch MENU at the top left corner of screen.
Step 1
2
2) Touch SCREEN SETUP icon.
Step 2
3
3) Touch << to decrease the screen angle.
Step 3
5
4
4) Touch >> to increase the screen angle.
Step 4
Step 5
1 - 4 is possible
Default = 1
5) Touch RETURN to exit.
25
XDVD9101 OPERATION
Screen Setup - Touch Screen Calibration
Upon initial installation or
occasionally, the touch screen
may have to be calibrated. Follow
these steps as described.
1
Step 1
1) Touch MENU at the top left corner of screen.
2
Step 2
Step 3 & 4
Step 4 & 5
2) Touch SCREEN SETUP icon.
3
3) Touch Calibration in TS Calibration row.
4
4) Touch the pointers as indicated on the screen.
5) Screen will automatically return to MAIN MENU when the calibration
procedure is complete.
26
XDVD9101 OPERATION
AM/FM Tuner Operation - OSD Overview
1
2
3
4
5
6
7
21
20
19
18
17
16
8
15
14
13
12
11
10
9
Tuner Mode
From the main menu, touch TUNER icon on the screen to select AM/FM Tuner
mode.
Current Source Indicator
1
2
Displays source currently playing.
Main Menu
Touch MENU to access the main menu.
Stereo Indicator
3
4
Shows that the frequency selected is received in stereo.
Information Indicator
Displays status of various tuning functions including Auto Station
Store, Preset Scan, Scan tuning, etc.
5
6
Preset Number List Display
Shows the preset list by preset number. Touch preset number to
select a preset. Touch and hold preset number to store presets.
Preset Station List Display
Shows the preset station list by frequency. Touch frequency to
select a preset. Touch and hold frequency to store presets.
Clock Indicator
7
8
Shows current time.
Preset List Page - Up/Down
Touch Page Up/Down arrows to select the next or previous page.
27
XDVD9101 OPERATION
AM/FM Tuner Operation - OSD Overview
Tune Frequency - Up
9
Touching this icon will tune the radio to a higher frequency by one
frequency step. Touch and hold for continuous tuning up. (This
function can also be performed by pressing the corresponding
key on the remote control.)
Tune Frequency - Down
Touching this icon will tune the radio to a lower frequency by one
10
frequency step. Touch and hold for continuous tuning down. (This
function can also be performed by pressing the corresponding
key on the remote control.)
Seek Next Station - Up
11
12
Touching this icon will tune to the next strong station at a higher
frequency. (This function can also be performed by pressing the
corresponding key on the front panel or remote control.)
Seek Next Station - Down
Touching this icon will tune to the next strong station at a lower
frequency. (This function can also be performed by pressing the
corresponding key on the front panel or remote control.)
13
14
Tuner Scan
Touch this icon to scan through all available stations in the
current band. Touch again to disable.
Preset Scan/Auto Station Tune
Touching this icon will scan through all presets in the current
band. Holding this button for more than 2 seconds will
automatically program the 12 strongest stations available into the
presets in the current band.
Band
15
Touch band icon repeatedly until the desired band is displayed,
FM1, FM2 or AM. (This function can also be performed by
pressing BAND button.)
Volume Indicator
Indicates current volume level, controlled by rotary encoder.
16
17
18
19
20
21
Loudness Indicator
Touch screen here to turn the Loudness function on/off.
EQ Indicator
Touch screen here to enter Audio Setup Menu.
Current Station Indicator
Indicates current frequency.
Local / DX Tuning Mode
Shows when local or distance tuning is on.
Band Indicator
Shows which band the radio is tuned to, FM1, FM2 or AM.
28
XDVD9101 OPERATION
AM/FM Tuner Operation
AM/FM Tuner Mode
From the main menu, touch TUNER icon to select AM/FM Tuner mode.
From the remote control or the front panel:
Press MODE until the current station information is displayed on the screen.
Band
Touch BAND on the screen repeatedly until the desired band is displayed, FM1,
FM2 or AM.
Press the BAND button on the front panel to switch between bands, FM1, FM2
or AM.
From the remote control:
Press the BAND button.
Manual Tuning
Touch
Touch
on the screen to tune to the next higher frequency step.
on the screen to tune to the next lower frequency step.
Touch and hold either
multiple stations.
or
on the screen to continue tuning across
From the remote control:
Touch
or
to perform manual tuning.
Seek Tuning
Touch
Touch
to tune to the next higher strong station.
to tune to the next lower strong station.
From the remote control:
Press
Press
to tune to the next higher strong station.
to tune to the next lower strong station.
Storing Presets
There are 24 FM and 12 AM presets available in 3 bands.
After finding the desired frequency to store in memory, touch and hold the
screen on any of the frequencies or preset numbers in the preset station list
until it turns yellow. The new station will replace the previous selection.
Auto Store Presets
Preset Scan
Touch and hold AS/PS to automatically program the 12 strongest stations
available into the presets in the current band.
Touch AS/PS to scan through all tunable presets in the current band and play
them for 10 seconds each.
29
XDVD9101 OPERATION
AM/FM Tuner Operation
Direct Preset Tuning
To select a desired station from the preset station list, touch any of the
displayed station frequencies or preset numbers from the list. Use the up and
down arrows on screen to select between the preset pages, if necessary.
From the remote control:
Press or to scroll through the presets. When the correct preset is
highlighted press OK.
Scan Tuning
Touch SCAN on the screen and it will tune you to all stations available with
good reception for 10 seconds at a time. Touch SCAN again to disable.
Local/Distance Tuning
Local tuning lets you tune in radio stations with sufficiently strong signals
for good reception. In areas that reception is poor, you can switch from local
to distance tuning by touching the LOC button on the screen. To return to
distance tuning mode, press the LOC button again. (Distance tuning is the
default tuning mode.)
30
XDVD9101 OPERATION
WARNING
Upon installation of this Monitor/DVD player (“unit”) into a vehicle, the driver of the vehicle
must not operate this unit by watching videos or playing video games while driving.
Failure to follow this instruction could lead to driver distraction which could result in
serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or
property damage.
Several states prohibit the installation of monitors/DVD players if the screen is visible from
the driver’s seat. If you reside in a jurisdiction which has enacted such a law, this unit
must not be installed so that the screen is visible from the driver’s seat. When installing
this unit in the front console/dashboard, the unit must be positioned so that it is facing the
front passenger seat only. Failure to follow this instruction could lead to driver distraction
which could result in serious injury or death to the vehicle’s occupants or persons outside
the vehicle and/or property damage.
This unit is designed so that it may be operated only when the vehicle is in “Park” and the
parking brake is fully engaged. To this end, this unit includes a parking brake lock-out
feature which prohibits the unit from operating if the vehicle is not in “Park” and/or the
parking brake is not fully engaged. When installing this unit, the installer must connect
the parking brake detect wire (“Yellow-Blue Lead”) to the parking brake mechanism in
order to make the parking brake lock-out feature operable. DO NOT simply ground the
parking brake detect wire to a metal portion of the vehicle. Failure to properly install
the parking brake lock-out feature could lead to driver distraction which could result in
serious injury or death to the driver’s occupants or persons outside the vehicle and/or
property damage.
Once the parking brake lock-out feature is installed, the owner/user must not attempt to
disrupt/neutralize the parking brake lock-out feature by (a) partially engaging the parking
brake and/or (b) purchasing/using any device or unit designed to send necessary brake
signals to the unit. Failure to follow these instructions could lead to driver distraction
which could result in serious injury or death to the driver’s occupants or persons outside
the vehicle and/or property damage.
When operating this unit, keep the unit’s volume level low enough so that the vehicle’s
occupants can hear traffic-related sounds such as police and emergency vehicles.
Failure to follow this instruction could lead to driver distraction which could result in
serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or
property damage.
31
XDVD9101 OPERATION
DVD Setup - Parking Brake Initialization
SAFETY WARNING
• The video display of the in-dash unit will not operate while the vehicle is
moving. This is a safety feature to prevent driver distraction. In-dash video
CAUTION !!!
IT'S UNLAWFUL TO OPERATE
A VEHICLE WHILE VIDEO IS
DISPLAY IN THE DRIVERS
VIEWING AREA
functions will only operate when vehicle is in Park and the PARKING BRAKE
is engaged. It is illegal in most states for the driver to view video while the
vehicle is in motion. Refer to local laws in your area.
• The vehicle must be in park and the parking brake applied to view video on the
in-dash monitor.
• As a safety feature, !!Safety Warning!! blue screen will show on the display
when the vehicle's parking brake is not engaged. Video display on the front
monitor isn't allowed until the PARKING BRAKE is engaged. Connect the
yellow/blue PARKING BRAKE wire to the brake switch circuit as described
on page 6. Note: DVD and AUX AV audio can be heard while the vehicle is in
motion without engaging the parking brake.
ENGAGE EMERGENCY BRAKE
TO WATCH VIDEO
Front Monitor Video
Initialization
Follow these two initialization procedures carefully to allow video playback on
on the XDVD9101 front monitor:
There are two situations to initiate the PARKING BRAKE sequence.
Parking Brake Initialization
Situation 1
First situation (if vehicle is moving):
1) Stop vehicle, put in Park, make sure PARKING BRAKE is off/released.
2) Depress PARKING BRAKE for 1 second.
3) Release PARKING BRAKE for 1 second.
4) Depress PARKING BRAKE permanently.
Note:
Once above procedure 1-4 is completed, video will display in about 2 seconds.
Parking Brake Initialization
Situation 2
Second situation (if vehicle is already parked and the PARKING BRAKE is
already applied):
1) Keep vehicle in Park, PARKING BRAKE should be on.
2) Release PARKING BRAKE for 1 second.
3) Depress PARKING BRAKE for 1 second.
4) Release PARKING BRAKE for 1 second.
5) Depress PARKING BRAKE permanently.
Notes:
Once above procedure 1-5 is completed, video will display in about 2 seconds.
The transition time must be less than 2 seconds between depress and release.
This procedure must be repeated anytime the vehicle ignition is turned off.
32
XDVD9101 OPERATION
DVD Setup - Region Management
DVD Region Management
Some DVD discs can be played only in certain playback modes according to the intentions of the software. As the
XDVD9101 plays discs according to their intentions, some functions may not work as intended. Please be sure to
read the instructions provided with each disc. This player has been designed to play back DVD software that has
been encoded for specific region areas. It cannot play back DVD software encoded for other region areas than the
region areas for which it has been designed.
The XDVD9101 will play discs labeled “Region 1” or “All”.
DVD region codes:
1 - USA, Canada
2 - Japan, Europe, South Africa, Middle East
3 - Rep. of Korea, Taiwan, Hong Kong, Parts of Southeast Asia
4 - Australia, New Zealand, Mexico, South America
5 - Eastern Europe, Russia, India, Africa
6 - China
DVD Disc Symbols
Notes:
Some DVD discs can be played
only in certain playback modes
according to the intentions of
the software. As the XDVD9101
plays discs according to their
intentions, some functions
may not work as intended.
Please be sure to read the
instructions provided with
each disc.
33
XDVD9101 OPERATION
DVD Setup - Inserting a Disc
Disc Loading Slot
Eject Button
Insert DVD with label facing upwards
Inserting a Disc With the label facing up, insert a standard size disc into the slot. The disc will
automatically begin playback. Other sub-menus may have to be pressed to
access the DVD movie/music content. Read the directions of your specific DVD
disc for other features.
Note: If PARENTAL Lock is activated and the disc inserted is not authorized,
a 4-digit code must be entered and/or the disc be authorized. See "RATING
MENU" on page 38.
Note: Only one disc can be inserted at a time.
Ejecting the Disc Press the EJECT button.
Resetting the Loading If the disc loads abnormally or an system error occurs, press and hold the
Mechanism eject button for 3 seconds to reset the loading mechanism. The disc will eject
and normal operation should resume.
34
XDVD9101 OPERATION
DVD Setup - Touch Screen Controls
Hidden Touch Screen areas There are several hidden TOUCH SCREEN areas as outlined below:
while in DVD mode
"A" area can be used in DVD, AUX 1 and AUX 2 modes to access MAIN menu.
Using the hidden
Touch Screen Controls
A - Displays MAIN menu
B - Displays DVD disc
information
C - Selects PREVIOUS
chapter
D - Selects NEXT chapter
E - Displays the DVD
transport controls
AREA A
Access MAIN Menu
AREA B
Displays Disc Information
F - Displays search menu
Note:
A DVD disc must be
inserted to access these
functions and features.
AREA C
AREA D
Selects PREVIOUS Chapter
Selects NEXT Chapter
AREA E
AREA F
Displays DVD Transport Controls
DVD Search
35
XDVD9101 OPERATION
DVD Setup Menu - Language
LANGUAGE Setup Menu With the unit in DVD mode, press AREA E (bottom center of screen) to display
the DVD transport controls (1). Press Setup (2) or press and hold the 0 key on
the remote to access the DVD setup menu. The LANGUAGE setup menu will
automatically be displayed.
Note:
A DVD disc must be inserted
to access these functions
and features.
Sub Title Press the current selection to select desired disc subtitle language.
English
French
Spanish
Auto
Off = DEFAULT
DVD Audio Press the current selection to select desired disc audio language.
English = DEFAULT
French
Spanish
DVD Menu
Press the current selection to select desired disc menu language.
English = DEFAULT
French
Spanish
36
XDVD9101 OPERATION
DVD Setup Menu - Video Settings
Video Setup Menu
With the unit in DVD mode, press AREA E (bottom center of screen) to display
the DVD transport controls (1). Press Setup (2) or press and hold the 0 key on
the remote to access the DVD setup menu. The LANGUAGE setup menu will
automatically be displayed. Press the VIDEO icon (3) to display the VIDEO
setup menu.
Note:
A DVD disc must be inserted
to access these functions
and features.
2
3
1
TV Shape
Press to select desired TV shape.
NORMAL
Normal/PS
Normal/LB
Wide
WIDE
Angle Mark
Select On to activate angle mark.
On
Off
37
XDVD9101 OPERATION
DVD Setup Menu - Rating
Rating Setup Menu
With the unit in DVD mode, press AREA E (bottom center of screen) to display
the DVD transport controls (1). Press Setup (2) or press and hold the 0 key on
the remote to access the DVD setup menu. The LANGUAGE setup menu will
automatically be displayed. Press the RATING icon (3) to display the RATING
setup menu.
Note:
A DVD disc must be inserted
to access these functions
and features.
2
3
1
Enable Parental Lock
Password
Touch the current rating, select desired rating, then input password. Default
password is "0000".
Setting Parental Lock
Password
1. Touch ****, enter current password, then press OK.
2. Enter new password, then press OK.
Rating Setting
1. Kid Safe
2. G
3. PG
4. PG-13
5. PG-R
6. R
7. NC-17
8. Adult = DEFAULT
Parental Password
Override
In the event you forget or loose your PARENTAL LOCK password, enter 9991.
38
XDVD9101 OPERATION
DVD Operation - Touch Screen Controls
1
Using the hidden Touch
Screen Controls
Touch AREA E
2
3
4
5
6
7
8
DVD Mode
From the main menu, touch the DISC icon on the screen to select DVD mode.
Setup Menu
1
2
Accesses the DVD Setup menu
Stop
Touch the icon to stop the chapter where it is. Touch again to stop
the disc (full stop).
3
4
Fast Reverse
Touch the icon to fast reverse at 2x speed. Each touch changes
speed from 2x to 4x to 8x to 16x to 32x, then back to 1x play.
Fast Forward
Touch the icon to fast forward at 2x speed. Each touch changes
speed from 2x to 4x to 8x to 16x to 32x, then back to 1x play.
Repeat
5
6
7
Touch the
icon to repeat the current chapter or title.
Sub-Title Mode
Activates sub-titles and cycles between multiple sub-title languages.
Audio Mode
Title Menu
Touch this icon to activate alternate audio modes on DVD's that have
alternate audio streams.
8
Accesses the DVD Title menu.
39
XDVD9101 OPERATION
DVD Operation - Searching a DVD
Searching a DVD
Searching by Time, Title Touch Area F to bring up the Search keypad, which allows
or Chapter a search for a specific time, title or chapter. The Time
search window appears as the default.
Press Time to toggle to the Title/Chapter search window.
Time Search Once the Time search window is open, use the keyboard
to enter a specific time on the disc, then touch OK. For
example, to skip to 1 hour, 12 minutes and 19
seconds into the DVD, touch 0 1, 1 2, 1 9, OK).
Title/Chapter Search Once the Title/Chapter search window is open, use the
keypad to enter a specific title and/or chapter on the
disc, then touch OK. This can be used to select a specific
chapter in the current title, a new title or a specific chapter
in a new title.
From the remote control:
Press SRCH once to access Time. Press SRCH again to
access Title/Chapter. Use the arrows to highlight either
the time, title or chapter field and use the numeric keypad
to enter the appropriate information and press OK.
Note:
Some DVD discs can be played only in certain playback modes according
to the intentions of the software. As the XDVD9101 plays discs according
to their intentions, some functions may not work as intended. Please be
sure to read the instructions provided with each disc.
40
XDVD9101 OPERATION
DVD Operation
Playback Control Touch Area E to bring up the on-screen buttons.
Touch to fast forward or to fast reverse.
Each subsequent press of the button will change the speed from normal to 2x
to 4x to 8x to 16x to 32x and back to 1x.
From the front panel:
Press and hold
Press and hold
to fast forward.
to fast reverse.
From the remote control:
Press
Press
to fast forward.
to fast reverse.
Repeat Mode Touch the
icon to repeat either a chapter or title. The first touch activates
Repeat Chapter mode and a second touch activates Repeat Title mode. Press a
third time to turn Repeat Off.
From the remote control:
Press
to select Repeat Chapter, Repeat Title and Repeat Off modes.
Note: The Repeat Mode can only be changed while the DVD is playing.
Play/Pause Touch PLAY/PAUSE on the front panel to temporarily stop playback of the
DVD. Touching it again will resume playback,
From the remote control:
Press PLAY to temporarily stop and resume playback.
Stop Touch to stop playback. Pressing PLAY at this point will resume playback.
If is touched a second time, then playback stops completely and will restart
from the beginning of the disc.
From the remote control:
Press to stop playback.
Sub-Titles Touch the SUB-T icon to activate Sub-Title mode and select a sub-title
language. Each touch will cycle the mode from off to language 1, language 2,
etc., and back to off.
From the remote control:
Press the SUB-T button to control Sub-Title mode.
Notes:
• Not all DVD's have sub-titles and when they do, some will only have 1
language. Therefore this function may be disabled or limited.
• The Sub-Title Mode can only be changed while the DVD is playing.
41
XDVD9101 OPERATION
DVD Operation
DVD Audio Touch AUD to change the audio stream. Each touch will cycle the language.
From the remote control:
Press the AUDIO button to select the Audio stream.
Notes:
• Not all DVD's have multiple languages, therefore this function may be disabled or
limited.
• The Audio stream can only be changed while the DVD is playing.
DVD Disc Information Touch Area B or press INFO to bring up the DVD Disc Information, which includes:
Current/Total Titles (1) and Chapters (5), elapsed time for current title (2), EQ Mode
(3) and Loudness setting (6) and current time (4).
From the remote control:
Press the INFO button to bring up the DVD Disc Information.
Zoom Mode From the remote control:
Press the ZOOM button to activate Zoom Mode.
Each subsequent press of the button will change the magnification from normal to
1x to 2x to 3x to 4x then to 1/2x, 1/3x, 1/4x and back to normal.
When Zoom Mode is active in 2x, 3x or 4x, the arrows on the remote will pan the
screen up, down, right and left.
DVD Title Menu Touch the Title Menu icon to return to the DVD main menu.
From the remote control:
Press TITLE to return to the DVD main menu.
Press ROOT to move up one level on the DVD menus. (For example, when viewing
bonus materials, the ROOT button will return to the bonus menu instead of the main
menu.) Pressing ROOT again will usually return to the current chapter.
Note: On some DVD's the TITLE and ROOT functions may be reversed.
42
XDVD9101 OPERATION
CD Operation - OSD Overview
5
1
2
3
4
6
20
19
18
17
16
15
14
12
9
8
13
11
10
7
CD Mode
From the main menu, touch the DISC icon on the screen to select CD mode.
1
2
3
4
Current Source Indicator
Displays source currently playing.
Track Number Indicator
Displays current track number and total number of tracks on the disc.
Track Time Indicator
Shows the elapsed time of the current track.
Track Title List
Displays up to 6 tracks on the disc in order, with track number.
5
6
7
Clock
Displays the current time.
Scroll bar
Indicates position of current track relative to the disc.
Page Up
Touch the
icon to see the previous 6 tracks on the disc.
43
XDVD9101 OPERATION
CD Operation - OSD Overview
Page Down
8
Touch the
icon to see the next 6 tracks on the disc.
Fast Forward
9
Touch the icon to fast forward at 2x speed. Each touch changes
speed from 2x to 4x to 8x to 16x to 32x then to 1x play.
Fast Reverse
Touch the
speed from 2x to 4x to 8x to 16x to 32x then to 1x play.
10
icon to fast reverse at 2x speed. Each touch changes
11
12
Track Up
Touch
Touch
to skip ahead to the next track.
Track Down
once to return to the beginning of the current track.
Press again to return to the previous track.
Play/Pause
13
14
Touch the
icon to temporarily stop or resume playback.
Volume Adjustment
Indicates current volume level, Turn the rotary or use the volume
t or u on screen to adjust the volume level lower or higher (0-46).
Loudness Indicator
Touch LOUD to turn the Loudness feature On or Off.
15
16
Direct Select Keyboard
Touch DIR to display a numeric keyboard. Enter desired track
number and touch OK to select it.
17
18
EQ Indicator
Touch screen here to enter Audio Setup Menu.
Repeat
Touch RPT to repeat current track. Rpt Trk will appear next to the
MENU button while this feature is activated. Touch RPT again to exit
Repeat mode.
Random
Intro
19
20
Touch RDM to shuffle all tracks on the disc. Random will appear
next to the MENU button while this feature is activated. Touch RDM
again to exit Random mode.
Touch INT to listen to 10 seconds of each track in order. Intro will
appear next to the MENU button while this feature is activated.
Touch INT again to exit Intro mode.
44
XDVD9101 OPERATION
CD Operation
Navigating the Track Title List
Navigate the track title list in one of two ways:
• Using the Page Up and Page Down buttons on the screen.
• Using the arrow buttons on the remote control.
Track Select
To select a desired track from the track title list, touch any track on the list.
From the remote control:
Press or to scroll through the tracks. When the correct track is highlighted
press OK.
Direct Select
To navigate forwards or backwards through all tracks, press
screen, front panel or remote control:
or
on the
Press
Press
to skip to the next track.
to skip to the previous track.
Note: Pressing
once will return to the beginning of the current track.
Pressing it a second time will skip to the previous track.
Direct Track Entry
Touch DIR to display a numeric keyboard. Enter desired track number, and
touch OK to select it.
From the remote control:
Use the numeric keypad to enter the desired track number.
Fast Forward/Fast Reverse
Use the Fast Forward or Fast Reverse on-screen buttons to speed up the
playback of a track. Each subsequent press of the button will change the speed
from normal to 2x to 4x to 8x to 16x to 32x and back to 1x.
Press
Press
to fast forward.
to fast reverse.
From the remote control:
Press
Press
to fast forward.
to fast reverse.
Intro Mode
Touch INT on the screen to listen to all tracks on the CD for 10 seconds at a time,
starting from the first track on the CD. Intro will appear next to the MENU button
while this feature is activated. Touch INT again to exit Intro Mode.
Touch RDM to shuffle all of the tracks on the CD. Random will appear next to the
MENU button while this feature is activated. Touch RDM again to exit Random
Mode.
Random Mode
45
XDVD9101 OPERATION
CD Operation
Repeat Mode
Touch RPT to repeat a track. Rpt Trk will appear next to the MENU button
while this feature is activated. Touch RPT again to exit Random Mode.
From the remote control:
Press
to select Repeat. Press it a second time to disable Repeat.
Note: Shuffle and Repeat modes can not be used simultaneously and
engaging one mode will cancel the other mode (if active.)
Repeat A-B
Play/Pause
From the remote control:
Press A B button once to select a start point. Press it a second time to
select and end point. RPT: A-B will appear next to the MENU button. The loop
will play from the start point to the end point until A B is pressed again.
Press PLAY/PAUSE to temporarily stop playback of the current track.
Touching it again will resume playback,
From the remote control:
Press PLAY to temporarily stop and resume playback.
Stop
Press BAND to stop playback of the current song. Pressing PLAY at this
point will resume playback. Press BAND a second time to stop playback
completely. Play will restart from the beginning of the disc.
From the remote control:
Press on the remote control to stop playback of the current song. Pressing
PLAY at this point will resume playback. If is touched a second time,
playback stops completely and will restart from the beginning of the CD.
46
XDVD9101 OPERATION
MP3/WMA/JPG Operation - OSD Overview
5
6
7
8
9
2
3
4
1
26
25
24
23
22
21
20
19
18
17
16
14
15
13
12
11 10
From the main menu, touch the DISC icon on the screen to select MP3/WMA mode.
MP3/WMA Mode
Current Source Indicator
1
Displays source currently playing.
File Number Indicator
2
Displays current file number and total number of files in the current
folder.
3
4
5
Elapsed Time Indicator
Shows the elapsed time of the current song.
Sound to Image Indicator
Press to switch from viewing sound files to image files.
Folder Name
Displays the name of the currently selected folder.
Playlist
6
7
Displays up to 6 files in order, with filename.
Clock
Displays the current time.
File Type Indicator
8
Displays type of file, either MP3, or WMA or JPG.
Scroll bar
9
Indicates position of current file relative to the current folder.
10
Page Up
Touch the
icon to see the previous 6 files in the current folder.
47
XDVD9101 OPERATION
MP3/WMA/JPG Operation - OSD Overview
Page Down
11
12
Touch the
icon to see the next 6 files in the current folder.
Fast Forward
Touch the icon to fast forward at 2x speed. Each touch
changes speed from 2x to 4x to 8x to 16x to 32x then to 1x play.
Fast Reverse
Touch the
13
icon to fast reverse at 2x speed. Each touch
changes speed from 2x to 4x to 8x to 16x to 32x then to 1x play.
Information
Track Up
14
15
16
Displays available ID3 tag information for the current song.
Touch
Touch
to skip ahead to the next track.
Track Down
once to return to the beginning of the current track.
Press again to return to the previous track.
Play/Pause
17
18
19
Touch
icon to temporarily stop or resume playback.
icon to select the previous available folder.
Previous Folder
Touch the
Volume Adjustment
Indicates current volume level, Turn the rotary or use the volume
t or u on screen to adjust volume level lower or higher (0-46).
Next Folder
20
21
22
Touch the
icon to select the next available folder.
Loudness Indicator
Touch LOUD to turn the Loudness feature On or Off.
Direct Select Keyboard
Press DIR to display a numeric keyboard. Enter desired track
number and touch OK to select it.
EQ indicator
23
24
Press EQ to enter the Audio Setup Menu.
Repeat
Touch RPT to repeat current track and again to repeat all tracks in
the current folder. Touch RPT again to exit Repeat mode.
Random
Intro
25
26
Touch RDM to shuffle all tracks in the current folder and again to
shuffle all tracks on the disc. Touch RDM again to exit Random
mode.
Touch INT to listen to 10 seconds of each track in the current folder
and again to preview all tracks on the disc. Touch INT again to exit
Intro mode.
48
XDVD9101 OPERATION
MP3/WMA/JPG Operation
Sound to Image Indicator
The Sound to Image indicator allows the selection of either sound (MP3 or WMA) or
image (JPEG) files to be displayed in the Playlist.
Indicates that sound files are currently displayed. Press to switch to
viewing image files.
Indicates that image files are currently displayed. Press to switch to
viewing sound files.
Folder List
Navigating the Folder/Playlist
File Select
Press the Folder Name area at the top of the screen to display the first six folders
on the disc. Press
or
or use the and buttons on the remote control to
view additional folders.
Once a folder is selected, the display will change to show the first six files in that
folder. The current folder name will appear in the Folder Name area. Press
to
navigate back to the previous folder, or press
to skip forward to the next folder.
Navigate through the Playlist by pressing
or
on the screen. Once the
desired file is highlighted, simply touch the screen at the appropriate file name to
begin playback.
From the remote control:
Press or to scroll through the files. When the correct file name is highlighted
press OK.
Direct Select
To navigate forwards or backwards through all tracks, press
screen, front panel or remote control:
or
on the
Press
Press
to skip to the next track.
to skip to the previous track.
Note: Pressing
once will return to the beginning of the current track. Pressing it
a second time will skip to the previous track.
Note: Pressing
from the last track in one folder will advance to the first track
in the next folder. Pressing
from the first track in a folder will return to the
previous folder.
Direct Track Entry
Touch DIR to display a numeric keyboard. Enter desired track number in the
current folder, and touch OK to select it.
From the remote control:
Use the numeric keypad to enter the desired track number in the current folder.
Fast Forward/Fast Reverse
Use the Fast Forward or Fast Reverse on-screen buttons to speed up the playback.
Each subsequent press of the button will change the speed from normal to 2x to 4x
to 8x to 16x to 32x and back to 1x.
Press
Press
to fast forward.
to fast reverse.
49
XDVD9101 OPERATION
MP3/WMA/JPG Operation
Fast Forward/Fast Reverse
Intro Mode
From the remote control:
Press
Press
to fast forward.
to fast reverse.
Touch INT on the screen to listen to all tracks in the current folder for 10
seconds at a time, starting from the next track. Int Fol will appear next to the
MENU button while this feature is activated.
Touch INT again to preview all tracks on the disc. Intro will appear next to
the MENU button while this feature is activated. Touch INT again to exit Intro
Mode.
Random Mode
Repeat Mode
Touch RDM on the screen to shuffle all tracks in the current folder. Rdm Fol
will appear next to the MENU button while this feature is activated.
Touch RDM again to shuffle all tracks on the disc. Rdm All will appear next
to the MENU button while this feature is activated. Touch RDM again to exit
Random Mode.
Touch RPT to repeat a track and again to repeat all tracks in the current
folder. Rpt Trk or Rpt Fol will appear next to the MENU button while this
feature is activated. Touch RDM again to exit Random Mode.
From the remote control:
Press
to select between Repeat, Folder Repeat and Repeat Off modes.
Note: Shuffle and Repeat modes can not be used simultaneously and
engaging one mode will cancel the other mode (if active.)
Repeat A-B
Play/Pause
From the remote control:
Press A B button once to select a start point. Press it a second time to
select and end point. RPT: A-B will appear next to the MENU button. The loop
will play from the start point to the end point until A B is pressed again.
Press PLAY/PAUSE to temporarily stop playback of the current track.
Touching it again will resume playback,
From the remote control:
Press PLAY to temporarily stop and resume playback.
Stop
Press BAND to stop playback of the current track. Pressing PLAY at this
point will resume playback. Press BAND a second time to stop playback
completely. Play will restart from the beginning of the disc.
From the remote control:
Press on the remote control to stop playback of the current track. Pressing
PLAY at this point will resume playback. If is touched a second time,
playback stops completely and will restart from the beginning of the disc.
50
XDVD9101 OPERATION
USB Operation - OSD Overview
5
6
7
8
9
2
3
4
1
26
25
24
23
22
21
20
19
18
17
16
14
15
13
12
11 10
USB Mode
From the main menu, touch the USB icon on the screen to select USB mode.
Current Source Indicator
1
Displays source currently playing.
File Number Indicator
2
3
Displays current file number and total number of files in the current
folder.
Elapsed Time Indicator
Shows the elapsed time of the current song.
4
5
Sound to Image Indicator
Press to switch from viewing sound files to image files.
Folder Name
Displays the name of the currently selected folder.
6
7
Playlist
Displays up to 6 files in order, with filename.
Clock
Displays the current time.
8
File Type Indicator
Displays type of file, either MP3, or WMA or JPG.
9
Scroll bar
Indicates position of current file relative to the current folder.
10
Page Up
Touch the
icon to see the previous 6 files in the current folder.
51
XDVD9101 OPERATION
USB Operation - OSD Overview
Page Down
11
12
Touch the
icon to see the next 6 files in the current folder.
Fast Forward
Touch the icon to fast forward at 2x speed. Each touch
changes speed from 2x to 4x to 8x to 16x to 32x then to 1x play.
Fast Reverse
Touch the
13
icon to fast reverse at 2x speed. Each touch
changes speed from 2x to 4x to 8x to 16x to 32x then to 1x play.
Information
Track Up
14
15
16
Displays available ID3 tag information for the current song.
Touch
Touch
to skip ahead to the next track.
Track Down
once to return to the beginning of the current track.
Press again to return to the previous track.
Play/Pause
17
18
19
Touch
icon to temporarily stop or resume playback.
icon to select the previous available folder.
Previous Folder
Touch the
Volume Adjustment
Indicates current volume level, Turn the rotary or use the volume
t or u on screen to adjust volume level lower or higher (0-46).
Next Folder
20
21
22
Touch the
icon to select the next available folder.
Loudness Indicator
Touch LOUD to turn the Loudness feature On or Off.
Direct Select Keyboard
Press DIR to display a numeric keyboard. Enter desired track
number and touch OK to select it.
EQ indicator
23
24
Press EQ to enter the Audio Setup Menu.
Repeat
Touch RPT to repeat current track and again to repeat all tracks in
the current folder. Touch RPT again to exit Repeat mode.
Random
Intro
25
26
Touch RDM to shuffle all tracks in the current folder and again to
shuffle all tracks on the disc. Touch RDM again to exit Random
mode.
Touch INT to listen to 10 seconds of each track in the current folder
and again to preview all tracks on the disc. Touch INT again to exit
Intro mode.
52
XDVD9101 OPERATION
USB Operation
USB Connection
Connect a device using the USB port on the front of the XDVD9101. The unit will
automatically switch to USB mode when a USB device is detected.
Sound to Image Indicator
The Sound to Image indicator allows the selection of either sound (MP3 or WMA) or
image (JPEG) files to be displayed in the Playlist.
Indicates that sound files are currently displayed. Press to switch to
viewing image files.
Indicates that image files are currently displayed. Press to switch to
viewing sound files.
Folder List
Navigating the Folder/Playlist
Track Select
Press the Folder Name area at the top of the screen to display the first six folders
on the disc. Press
or
or use the and buttons on the remote control to
view additional folders.
Once a folder is selected, the display will change to show the first six files in that
folder. The current folder name will appear in the Folder Name area. Press
to
navigate back to the previous folder, or press
to skip forward to the next folder.
Navigate through the Playlist by pressing
or
on the screen. Once the
desired file is highlighted, simply touch the screen at the appropriate file name to
begin playback.
From the remote control:
Press or to scroll through the files. When the correct file name is highlighted
press OK.
Direct Select
To navigate forwards or backwards through all tracks, press
screen, front panel or remote control:
or
on the
Press
Press
to skip to the next track.
to skip to the previous track.
Note: Pressing
once will return to the beginning of the current track. Pressing it
a second time will skip to the previous track.
Note: Pressing
from the last track in one folder will advance to the first track
in the next folder. Pressing
from the first track in a folder will return to the
previous folder.
Direct Track Entry
Touch DIR to display a numeric keyboard. Enter desired track number in the
current folder, and touch OK to select it.
From the remote control:
Use the numeric keypad to enter the desired track number in the current folder.
Fast Forward/Fast Reverse
Use the Fast Forward or Fast Reverse on-screen buttons to speed up the playback.
Each subsequent press of the button will change the speed from normal to 2x to 4x
to 8x to 16x to 32x and back to 1x.
Press
Press
to fast forward.
to fast reverse.
53
XDVD9101 OPERATION
USB Operation
Fast Forward/Fast Reverse
Intro Mode
From the remote control:
Press
Press
to fast forward.
to fast reverse.
Touch INT on the screen to listen to all tracks in the current folder for 10
seconds at a time, starting from the next track. Int Fol will appear next to the
MENU button while this feature is activated.
Touch INT again to preview all tracks on the disc. Intro will appear next to
the MENU button while this feature is activated. Touch INT again to exit Intro
Mode.
Random Mode
Repeat Mode
Touch RDM on the screen to shuffle all tracks in the current folder. Rdm Fol
will appear next to the MENU button while this feature is activated.
Touch RDM again to shuffle all tracks on the disc. Rdm All will appear next
to the MENU button while this feature is activated. Touch RDM again to exit
Random Mode.
Touch RPT to repeat a track and again to repeat all tracks in the current
folder. Rpt Trk or Rpt Fol will appear next to the MENU button while this
feature is activated. Touch RDM again to exit Random Mode.
From the remote control:
Press
to select between Repeat, Folder Repeat and Repeat Off modes.
Note: Shuffle and Repeat modes can not be used simultaneously and
engaging one mode will cancel the other mode (if active.)
Repeat A-B
Play/Pause
From the remote control:
Press A B button once to select a start point. Press it a second time to
select and end point. RPT: A-B will appear next to the MENU button. The loop
will play from the start point to the end point until A B is pressed again.
Press PLAY/PAUSE to temporarily stop playback of the current track.
Touching it again will resume playback,
From the remote control:
Press PLAY to temporarily stop and resume playback.
Stop
Press BAND to stop playback of the current track. Pressing PLAY at this
point will resume playback. Press BAND a second time to stop playback
completely. Play will restart from the beginning of the disc.
From the remote control:
Press on the remote control to stop playback of the current track. Pressing
PLAY at this point will resume playback. If is touched a second time,
playback stops completely and will restart from the beginning of the disc.
54
XDVD9101 OPERATION
Media Compatibility - Disc
MEDIA
CD
File Type
WMA
MP3
ISO9660
Level 1, Level 2
Level 3
File System
X
X
ISO9660
JOLIET
Playback
Extension
Filename
Playback
Filename
32 bytes
32 bytes
Other
Extensions
ROMEO
X
X
X
X
X
X
X
X
X
X
Apple ISO
X
.mp3/.MP3/.Mp3/.mP3
.wma/.WMA
.rmp/.m4a
MPEG 1
X
File
Extension
X
MPEG
Format
MPEG 2
MPEG 2.5
MPEG 1
8/11.025/12/16/22.05
24/32/44.1/48kHz
Sampling
Frequency
X
X
X
MPEG 2
32/44.1/48kHz
MPEG 2.5
8/11.025/12/16/22.05
24/32/44.1/48kHz
WMA
MPEG 1
22.05/32/44.1/48kHz
X
8 ~ 320kbps
64 ~ 912kbps
8 ~ 320kbps
X
X
Bitrate
MPEG 2
X
MPEG 2.5
X
32 ~ 192kbps
Unlimited
23 bytes
3000 files
256 folders
3000 files
X
WMA
Directory Depth
File Name Length
Total File Number
Total Folder Number
File Number via Folder
Unlimited
23 bytes
3000 files
256 folders
3000 files
Other
Information
MP3 ID3 TAG
ver.1.x
ver.2.x
X
v2.3
Title, Artist, Album
Title, Artist
X
WMA TAG
X
55
XDVD9101 OPERATION
Media Compatibility - USB Flash Drive
MEDIA
File Type
FAT
USB Flash Drive
WMA
MP3
X
FAT 12
X
X
File System
FAT 16/FAT 32
X
.mp3/.MP3/.Mp3/.mP3
File
Extension
.wma/.WMA
.rmp/.m4a
MPEG 1
X
X
X
MPEG
Format
MPEG 2
X
MPEG 2.5
MPEG 1
X
8/11.025/12/16/22.05
24/32/44.1/48kHz
Sampling
Frequency
X
X
X
MPEG 2
32/44.1/48kHz
MPEG 2.5
8/11.025/12/16/22.05
24/32/44.1/48kHz
WMA
MPEG 1
22.05/32/44.1/48kHz
X
8 ~ 320kbps
64 ~ 912kbps
8 ~ 320kbps
X
X
Bitrate
MPEG 2
X
MPEG 2.5
X
32 ~ 192kbps
Unlimited
23 bytes
3000 files
256 folders
3000 files
X
WMA
Directory Depth
File Name Length
Total File Number
Total Folder Number
File Number via Folder
Unlimited
23 bytes
3000 files
256 folders
3000 files
Other
Information
MP3 ID3 TAG
ver.1.x
ver.2.x
X
v2.3
Title, Artist, Album
Title, Artist
X
WMA TAG
X
Notes:
For best results, use the following settings when ripping MP3 files:
128kbps or higher constant bit rate
44.1kHz or higher sampling frequency
For best results, use the following settings when ripping WMA files:
64kbps or higher constant bit rate
44.1kHz or higher sampling frequency
56
XDVD9101 OPERATION
Media Compatibility - Notes
Media Compatibility
The following types of discs are compatible:
• CD-DA, CD-ROM (ISO), CD-R, CD-RW
• DVD Video, DVD+R/RW, DVD-R/RW
The following types of discs/files are not compatible:
• WMA files that are protected by DRM (Digital Rights Management)
• WMA lossless format
• Discs recorded with Track At Once or packet writing
• MP3 PRO format
• MP3 playlists
• WAV format
• WMV format
• DivX format
• AVI format
• MPG format
• AAC format
Some recordable DVD's and CD's may be incompatible with this unit,
depending on media type and recording method.
Playback Order
MP3/WMA playback sequence is based on recorded order of files and begins
in the root folder of the disc or USB flash drive. Any empty folders or folders
that do not include MP3/WMA/JPG files are skipped. Refer to your recording
software’s user’s manual for more information.
Compatible Recording Formats
ISO9660 standards:
• Maximum nested folder depth is 8 (including the root folder).
• Valid characters for folder/file names are letters A-Z (all caps), numbers
0-9, and “_” (underscore). Some characters may not be displayed correctly,
depending on the character type.
• This device can play back discs in Joliet and other standards that conform
to ISO9660. MP3/WMA written in the formats other than the above may
not play and/or their file names or folder names may not be displayed
properly.
Additional MP3/WMA Information
An internal buffer provides ESP (Electronic Skip Protection) to virtually
eliminate skipping.
When playing a disc recorded with regular audio files (CD-DA or .WAV) and
MP3/WMA files, the unit will play the MP3/WMA files only.
Note:
Some files may not play or be displayed correctly, depending on sampling
rates and bit rates.
57
XDVD9101 OPERATION
iPod® Operation - OSD Overview (Optional)
4
5
6
7
2
3
1
24
23
22
21
20
19
18
17
16
15
14
12
13
11
10
9
8
iPod Mode
From the main menu, touch the iPod icon on the screen.
Current Source Indicator
1
Displays source currently playing.
Song Number Indicator
2
3
Displays current song number and total number of songs.
Elapsed Time Indicator
Shows the elapsed time of the current song.
Artist Information
4
5
Displays the artist information for the currently selected song.
Displays up to 6 songs/groups in order, with filename.
Displays the current time.
Playlist
Clock
6
7
Scroll bar
Page Up
Page Down
Indicates position of current song in relation to the current folder.
8
9
Touch the
Touch the
icon to see the previous 6 songs.
icon to see the next 6 songs.
58
XDVD9101 OPERATION
iPod® Operation - OSD Overview (Optional)
Fast Forward
10
Touch the icon to fast forward at 2x speed. Touch again to
cancel.
Fast Reverse
11
Touch the
cancel.
icon to fast reverse at 2x speed. Touch again to
Album Information
Displays available album information for the current song.
12
Track Up
13
14
Touch
Touch
to skip ahead to the next song.
Track Down
once to return to the beginning of the current song.
Press again to return to the previous song.
Play/Pause
15
Touch
icon to temporarily stop or resume playback.
Group Select Mode
Allows selection of songs by various groups.
16
17
Volume Adjustment
Indicates current volume level, Turn the rotary or use the volume
t or u on screen to adjust volume level lower or higher (0-46).
Return/Back
Touch
18
to return to the previous group/menu.
Loudness Indicator
19
20
21
22
Touch LOUD to turn the Loudness feature On or Off.
Allows viewing of video files from the G5 iPod only.
Press EQ to enter the Audio Setup Menu.
Video Mode
EQ indicator
Repeat
Touch RPT to repeat current song. Repeat will appear next to the
MENU button while this feature is activated. Touch RPT again to exit
Repeat mode.
Random
Intro
23
24
Touch RDM to shuffle all songs. Random will appear next to the
MENU button while this feature is activated. Touch RDM again to
exit Random mode.
Touch INT to listen to 10 seconds of each song in order. Intro will
appear next to the MENU button while this feature is activated.
Touch INT again to exit Intro mode.
59
XDVD9101 OPERATION
iPod® Operation - (Optional)
iPod Connection
Use the included 2-wire iPod cable to connect an iPod to the XDVD9101. The unit
will automatically switch to iPod mode when an iPod is connected.
Group Select Mode
The songs in the iPod are organized by groups. Touch the
screen to access the group select mode:
on the
Once in Group Select Mode select one of the group types from the menu, then
select an item in that group.
For example:
• Select the Artist group and the display will change to a list of available artists.
Then select an artist from this list to hear some or all songs from that artist.
• Select the Song group to hear all songs on the iPod.
Touch the
on-screen button to go back to a previous menu. For example,
Return/Back
when browsing songs from a particular artist in Artist group mode, touch
return to the list of all available artists.
to
When there are more than 6 songs in a given group, the Page Up and Page Down
on-screen buttons can be used to see the rest of the songs in the current group.
Then use the Direct Select method to play a song from that group.
Page Up/Down
The Page Up and Page Down on-screen buttons can be used to preview the next/
previous pages.
Note: The Page Up/Down buttons will not select a song, but simply display more
songs in the group. If another song is not selected within 10 seconds of the last
press then the screen will return to the currently playing song/group.
From the remote control:
Song Select
Direct Select
Press
Press
to skip to the next song.
to return to the beginning of the current song. A second press will skip
to the previous song
To select a desired song from the song list, touch any of the displayed songs in
the list.
From the remote control:
When the correct song is highlighted press OK.
60
XDVD9101 OPERATION
iPod® Operation (Optional)
Song Control
You can use the Fast Forward and Fast Reverse on-screen buttons to play
a song forwards or backwards at a higher speed. Touch the same button a
second time or press Play to return to normal playback.
From the remote control:
Press
Press
to fast forward.
to fast reverse.
Intro Mode
Touch INT on the screen to listen to all songs in the current group for 10
seconds at a time, starting from the next track. Intro will appear next to the
MENU button while this feature is activated. Touch INT again to exit Intro
Mode.
Random Mode
Repeat Mode
Touch RDM to shuffle the songs in the current group. Random will appear
next to the MENU button while this feature is activated. Touch RDM again to
exit Random Mode.
Touch RPT to repeat a song. Repeat will appear next to the MENU button
while this feature is activated. Touch RPT again to exit Repeat Mode.
From the remote control:
Press
to select Repeat. Press it a second time to disable Repeat.
Note: Shuffle and Repeat modes can not be used simultaneously and
engaging one mode will cancel the other mode (if active.)
Play/Pause
Press PLAY/PAUSE to temporarily stop playback of the current song. Press it
again will resume playback,
Press the PLAY/PAUSE button to pause or resume the song.
From the remote control:
Press PLAY to temporarily stop and resume playback.
61
XDVD9101 OPERATION
iPod® Operation (Optional)
Playing photo or
video files from G5 iPod
Notes:
VIDEO/PHOTO FILES are only
compatible with G5 iPod.
The iPod photo/video display of
the in-dash unit will not operate
while the vehicle is moving. This
is a safety feature to prevent
driver distraction. iPod photo/
video functions will only operate
when vehicle is in Park and the
parking brake is engaged. It is
illegal in most states for the driver
to view video while the vehicle is
in motion.
• Touch VID icon, iPod will disconnect and wait for video signal.
• Make sure VIDEO OUTPUT is turned on in your G5 iPod. Consult your iPod
owner's manual for details.
• Press PLAY on your G5 iPod, photos or video will appear on the TFT.
Releasing Video control from iPod
iPod will reconnect
• Touch anywhere on the screen during video playback to reconnect iPod
and resume music playback.
62
XDVD9101 OPERATION
iPod® Operation (Optional)
Selecting Music By:
Playlists
Artists
Albums
Genres
Songs
Composers
Touch desired Folder, music will begin to play after selection.
Character Support
iPod Compatibility
Only alphanumeric characters can be displayed (ASCII type).
Artist Name and Album name will only be displayed if included with the
song.
The following models are supported:
• Third generation iPod - Version 2.3
• Fourth generation iPod - Version 3.1.1
• Fifth generation iPod - Version 1.1.2
• iPod Classic - Version 1.1.2
• iPod Touch - Version 1.1.4
• iPod Nano - Version 1.2.0
• iPod Nano (Second Generation) - Version 1.1.3
• iPod Nano (Third Generation) - Version 1.1.2
• iPod Photo - Version 1.2.1
• iPod Mini - Version 1.4.1
Refer to your iPod instruction manual for details on how to obtain the latest
software.
63
XDVD9101 OPERATION
Auxiliary Inputs - AV1 /AV2
Using A/V1 Input
Connect an optional audio/video source into the 3.5mm (front panel) input.
Select AV/1 from the Main Menu to listen to audio.
Engage parking brake as described on page 32 to watch video.
Adjust volume on the external audio source as needed (if connected to the
headphone output).
Using A/V2 Input
Connect an optional audio/video source to the Auxiliary Input 2 (Red/White/Yellow
RCA connectors). Refer to page 6 for details.
Select AV/2 from the Main Menu to listen to audio.
Engage parking brake as described on page 32 to watch video.
Rear Camera Operation - (Optional)
Using Rear Camera
Connect an optional rear camera to the Camera Input (Black RCA connector).
Refer to page 6 for details.
The camera image can be reversed (if needed) in the Main Setup Menu. Refer to
page 18 for details.
Manual selection - Touch CAMERA icon from the Main Menu to select camera
mode. Touch the top left area on the screen to exit camera mode.
Auto Selection
The unit will automatically select camera mode when connected to the reverse
lamp circuitry. Refer to page 6 for details. Anytime the reverse gear is selected,
the panel will open and select camera mode automatically.
64
XDVD9101 OPERATION
Limited One Year Warranty
This warranty gives you specific legal rights.
You may also have other rights which vary from
state to state.
What to do?
1. Before you call for service, check the
troubleshooting guide in your owner’s
manual. A slight adjustment of any custom
controls may save you a service call.
Dual Electronics Corp. warrants this product to
the original purchaser to be free from defects in
material and workmanship for a period of one
year from the date of the original purchase.
2. If you require service during the warranty
period, you must carefully pack the product
(preferably in the original package) and ship
it by prepaid transportation with a copy of
the original receipt from the retailer to an
authorized service center.
Dual Electronics Corp. agrees, at our option,
during the warranty period, to repair any defect
in material or workmanship or to furnish an
equal new, renewed or comparable product
(whichever is deemed necessary) in exchange
without charges, subject to verification of the
defect or malfunction and proof of the date of
purchase. Subsequent replacement products
are warranted for the balance of the original
warranty period.
3. Please describe your problem in writing and
include your name, a return UPS shipping
address (P.O. Box not acceptable), and a
daytime phone number with your shipment.
4. For more information and for the location of
the nearest authorized service center please
contact us by one of the following methods:
Who is covered? This warranty is extended
to the original retail purchaser for products
purchased and used in the U.S.A.
• Call us toll-free at 1-866-382-5476
• E-mail us at [email protected]
What is covered? This warranty covers all
defects in material and workmanship in
this product. The following are not covered:
installation/removal costs, damage resulting
from accident, misuse, abuse, neglect, product
modification, improper installation, incorrect
line voltage, unauthorized repair or failure to
follow instructions supplied with the product,
or damage occurring during return shipment of
the product.
Exclusion of Certain Damages: This warranty
is exclusive and in lieu of any and all other
warranties, expressed or implied, including
without limitation the implied warranties of
merchantability and fitness for a particular
purpose and any obligation, liability, right,
claim or remedy in contract or tort, whether
or not arising from the company’s negligence,
actual or imputed. No person or representative
is authorized to assume for the company any
other liability in connection with the sale of
this product. In no event shall the company be
liable for indirect, incidental or consequential
damages.
65
XDVD9101 OPERATION
Specifications
DVD Player
FM Tuner
Frequency response: 10Hz-20kHz
Channel separation @ 1kHz: >65dB
D/A converter: 24 Bit
Tuning range: 87.5MHz-107.9MHz
Usable sensitivity: 8.5dBf
50dB quieting sensitivity: 10dBf
Stereo separation @ 1kHz: 40dB
Frequency response: 30Hz-13kHz
AM Tuner
Monitor
Tuning range: 530kHz-1710kHz
Usable sensitivity: 22uV
Frequency response: 30Hz-2.2kHz
Panel size: 7” (177.8 mm) diagonal measurement
View angle (up/down/left/right): 30/60/60/60
Resolution: 480 W x 234 H
2
Brightness (cd/m ): 350
Contrast ratio: 350:1
Elements: 336,960
General
Operating voltage: 11-16 VDC, negative ground
Speaker output impedance: 4~8 ohms
Line output voltage: 2 Volts
Line output impedance: 200 ohms
Chassis dimensions: 7" x 7" x 2"
(178 x 178 x 51 mm)
Design and specifications subject to change without notice.
CEA-2006 Power Standard Specifications
(reference: 14.4VDC +/- 0.2V, 20Hz~20kHz)
Power Output: 17 Watts RMS x 4 channels at 4 ohms and < 1% THD+N
Signal to Noise Ratio: 80dBA (reference: 1 watt into 4 ohms)
66
XDVD9101 OPERATION
Troubleshooting
General
Problem
Cause
Action
Yellow wire not connected or incorrect
voltage Red wire not connected or incorrect
voltage
Check connections for proper voltage (11~16VDC)
Unit will not turn on
(no power)
Black wire not connected
Fuse blown
Check connection to ground
Replace fuse
Speaker wires not connected
Check connections at speakers
Unit has power
(but no sound)
One or more speaker wires touching each
other or touching chassis ground
Insulate all bare speaker wires from each other and
chassis ground
Yellow or red wire touching chassis ground Check for pinched wire
Unit blows fuse
Speaker wires touching chassis ground
Incorrect fuse rating
Check for pinched wire
Use fuse with correct rating
Unit has audio
(but no video)
Parking brake safety circuit not connected
Parking brake not applied
Check connections at parking brake
Apply parking brake as described on page 32
No video display
(when in reverse)
Reverse circuit not connected
Vehicle is not in reverse
Check connections at reverse lamp
Select reverse gear
DVD does not start
playback
Physical defect in media
Wrong region
Check media for scratches
Use discs labeled "Region 1" or "All" only.
IR remote does not work Dead battery
Replace battery
Unit is not mounted correctly
Check mounting sleeve
Check media for scratches
Press eject or RESET
Excessive skipping
Physical defect in media
Invalid Disc appears
on display
Focus error or disc is in upside down
Invalid Region appears on Region code error
Use only DVD's labeled “Region 1” or “All” only.
display
Front panel will not
open/close
Front panel obstructed
Remove the obstacle and press OPEN to resume the
monitor open/close sequence.
67
XDVD9101 OPERATION
Notes
68
XDVD9101 OPERATION
Notes
69
XDVD9101 OPERATION
Notes
70
Dual Electronics Corp.
Toll Free: 1-866-382-5476
©2008 Dual Electronics Corp. All rights reserved.
NSA1008-V01
Printed in China
|