Directed Video OHD070 User Manual

O W N E R ’ S G U I D E  
INSTALLATION GUIDE  
7” Mobile Video System  
MODEL OHD070  
© 2004 Directed Electronics, Inc. N83070 12-04  
Table of Contents  
Non-Transferable Limited Consumer Warranty . . . . . . . . . . . . . . . . . . . . . . . . .2  
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
Important Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
What is Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
Your Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Supported Disc Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Preliminary Preparations .........................................................................8  
Mounting Video System ..........................................................................8  
Electrical Connections...........................................................................10  
Video System Controls and Description . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
Functions............................................................................................13  
Battery Replacement ............................................................................15  
Using the Remote Control......................................................................15  
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
Loading/Ejecting a Disc ........................................................................16  
Stopping Play......................................................................................16  
Rapid Forward/Reverse..........................................................................16  
Skipping Track.....................................................................................17  
Slow Motion Play .................................................................................17  
Pause.................................................................................................17  
Mute..................................................................................................17  
Repeat ...............................................................................................18  
A-B....................................................................................................18  
Disc Search (GOTO)...............................................................................18  
Zoom .................................................................................................19  
Random..............................................................................................19  
Program..............................................................................................19  
Mode Selection....................................................................................19  
Volume Level Adjustment ......................................................................19  
Light Switch........................................................................................20  
Jack for Earphone ................................................................................20  
Earphone Volume Adjustment.................................................................20  
Remote Sensor (IR)..............................................................................20  
Turning the Unit ON/OFF.......................................................................20  
Monitor Release ..................................................................................20  
Infrared Transmitting Window ................................................................20  
3
© 2004 Directed Electronics, Inc.  
LCD Menu Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21  
Menu..................................................................................................21  
Transmit .............................................................................................21  
Screen................................................................................................21  
Search................................................................................................21  
On Screen Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22  
Display...............................................................................................22  
Multi-Audio Language Function ..............................................................25  
Title Menu Function..............................................................................26  
Multi-Subtitle Language Function ...........................................................26  
Multi--Angle Function...........................................................................26  
MP3 Disc Play......................................................................................27  
TV Operation .......................................................................................27  
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28  
Initial Setup .......................................................................................28  
General Setup......................................................................................29  
Speaker Setup .....................................................................................32  
Audio Setup ........................................................................................33  
Preferences Setup (including parental)....................................................35  
Factory Default Setting.........................................................................41  
Appendix A – Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42  
Cleaning the LCD Screen .......................................................................42  
Cleaning the Enclosure..........................................................................42  
Cleaning and Handling Discs..................................................................42  
Appendix B – Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44  
Appendix C – Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46  
Safety Information  
To reduce the risk of fire or electric shock, do not expose this equipment to rain or  
moisture.  
The mobile DVD player is a Class I laser product. This mobile DVD player uses a laser  
beam which could cause vision damage. Do not open the covers to this unit, there  
are no owner serviceable parts inside.  
4
© 2004 Directed Electronics, Inc.  
Important Notes  
NOTE: The parental level control is discussed in the Preferences Setup section of this  
manual.  
1. Before operating your LCD Monitor system, please read these instructions care-  
fully.  
2. Retain this manual for future reference.  
3. Do not remove any WARNING stickers on the unit.  
4. When the power to the unit is shut off, the next time the unit is turned on the  
not  
speakers will  
operate. The Transmit feature must be reset to OFF (IR head-  
phones off) in the setup features.  
5. Do not use any chemical solvent, cleaning agent or corrosive detergent to clean  
away dirt on the surface of the screen. Doing so may cause irreversible dam-  
age to the surface of the LCD screen. To clean off dirt or fingerprints, it is rec-  
ommended that a soft-damp lens cleaning cloth be used.  
6. Using spare parts from another manufacturer may cause permanent damage to  
the unit.  
7. If using the surface mount pedestal, ensure that the pedestal mount is placed  
on a flat, hard, and stable surface.  
8. Avoid installing the monitor screen in a position that is under direct sunlight  
and away from hot air vents.  
9. Install the unit in a dry location, avoid condensation.  
10. Ensure the plugs are properly plugged in before operating the unit.  
11. Should the LCD panel break, avoid contact with the broken glass or fluid leaking  
out from the enclosure. If you come into contact, flush and clean the affected  
areas with plenty of water. Seek medical attention immediately.  
12. When operating the display unit, avoid touching or pressing on the LCD screen.  
Excessive force will damage the LCD screen.  
13. When installing this unit in a vehicle, ensure that the installation and use of  
this unit is in compliance with local vehicle rules and regulations.  
14. Do not attempt to disassemble or adjust this product. Contact your factory  
authorized dealer for service assistance.  
15. Avoid inserting any foreign objects into the slot of this player. Failure to  
observe this caution may cause the unit to malfunction.  
16. This product is designed to operate with a 12 volt DC, negative ground battery  
system.  
17. While Driving, keep the volume level low enough to be aware of road and traf-  
fic conditions.  
18. The unit should be installed in a horizontal position with the front end up at  
a convenient angle, but not more than 30 degrees.  
5
© 2004 Directed Electronics, Inc.  
What is Included  
7” Overhead Monitor/DVD Player Mounting hardware  
Metal mounting plate  
Mounting bracket  
Remote Control Unit/w battery  
Rubber plate  
Introduction  
Congratulations on your purchase of the world’s finest video entertainment system.  
At Directed we are committed to bringing you the most technologically advanced  
products available. We are pleased that you chose a Directed Video product.  
Through years of critical testing and hand craftsmanship, we have created a wide  
range of video entertainment products for your viewing pleasure.  
This system incorporates the use of on screen display menu controls that allow you  
to configure the system to suit your own personal preferences.  
To view other great products from Directed Electronics, please visit the Directed  
6
© 2004 Directed Electronics, Inc.  
Your Warranty  
Your warranty registration must be completely filled out and returned within 10  
days of purchase. Your product warranty will not be validated if your warranty reg-  
istration is not returned. Make sure you receive the warranty registration from your  
dealer. It is also necessary to keep your proof of purchase, which reflects that the  
product was installed by an authorized dealer.  
Supported Disc Formats  
The following disc formats are supported by this player.  
DVD  
12 cm disc  
TG  
(Single-sided disc only)  
Video CD  
12 cm disc  
CD  
12 cm disc  
MP3  
12 cm disc  
NOT  
The following disc formats are  
DVD-ROM  
supported by this player.  
CDV  
DVD-R/DVD-RAM  
CD-G  
7
© 2004 Directed Electronics, Inc.  
Installation  
PRELIMINARY PREPARATIONS  
NOTE: The unit should be installed by a qualified service technician. This unit is  
designed to operate with a 12 VDC, negative ground battery system.  
NOTE: Use only proper sized fasteners and cables during installation. Use of improp-  
er fasteners or cables can lead to mechanical failure of the unit or create a fire haz-  
ard.  
1. Disconnect the ground wire from the battery terminal prior to connecting the  
unit to the electrical system.  
NOTE: Some vehicle radios have an anti-theft code system that will disable the radio  
if the battery is disconnected. If this vehicle has such a radio, ensure you have the  
access code to restore the radio to normal operation.  
2. Pick a location to install the monitor where it will not obstruct the rear view  
mirror or the air conditioning vents.  
3. Do not install this unit at an angle exceeding 30 degrees.  
MOUNTING VIDEO SYSTEM  
8
© 2004 Directed Electronics, Inc.  
Mounting Bracket  
Levers  
Self-tapping Screws (ø4x10)  
Slots  
DVD Bracket  
Mounting Bolts (M3.5x10)  
Rubber Caps  
1. Determine the mounting location and drill four mounting holes (see the figure  
above).  
2. Attach the mounting bracket to the holes with the self-tapping screws (ø4x10).  
3. Let the two levers aim at the slots on the DVD bracket to fix the display unit.  
4. Open the monitor to display the five screw holes.  
5. Attach the unit to the bracket with the mounting bolts (M 3.5x10).  
6. Insert five rubber caps into the screw holes.  
7. When the installation has completed, you can turn the display upward or down-  
ward, left or right to adjust the viewing angle. (See the arrowhead symbol in  
the figure above).  
9
© 2004 Directed Electronics, Inc.  
ELECTRICAL CONNECTIONS  
POWER AND VIDEO WIRING  
RED  
AUDIO R OUT  
AUDIO L OUT  
WHITE  
Power and Dome Lamp  
Wiring  
YELLOW  
RED  
VIDEO OUT  
AUDIO R IN  
WHITE  
AUDIO L IN  
YELLOW  
VIDEO IN  
Video Wiring  
Connect the power and dome light wires as follows:  
Color  
Red  
Connection  
Accessory  
Yellow  
Battery +12V  
White  
Interior Light System (Dome -)  
Interior Light System (Dome +)  
Orange  
Black  
Ground  
OPTIONAL DIGITAL WIRING  
DIGITAL AUDIO  
(OPTIONAL)  
10  
© 2004 Directed Electronics, Inc.  
Video System Controls and Description  
17  
11  
5
3 8  
1
4
10  
9
2
7 6  
17  
5
14  
15  
14  
15  
12  
13  
11  
© 2004 Directed Electronics, Inc.  
18  
19  
1. POWER Button  
2. EJECT Button  
3. MENU Button  
4. MOD Button  
5. Car Dome Lamps  
6. Light Switch  
7. VOLUME+  
11. Indicator Light for AV  
12. Disc Slot  
13. 6.4 inch TFT Color Monitor  
14. Earphone Volume Controls  
15. Jacks for Earphone  
16. IR Transmitting Window  
17. OPEN Button: Press the button to  
deploy the screen display from the  
unit’s base.  
8. VOLUME-  
9. IR Receiver  
10. Indicator Light for DVD  
18. Speakers (qty-2)  
19. Speaker On/Off button  
NOTE: The TRANSMIT feature must be Off on the Setup Menu for the speakers to operate.  
The auxiliary audio output and conventional headphone jacks are active at all times.  
12  
© 2004 Directed Electronics, Inc.  
Remote Control  
FUNCTIONS  
8
9
5
4
1
3
7
POWER  
SUBTITLE  
EJECT  
2
6
MUTE  
MODE  
ANGLE  
DISPLAY  
SETUP  
PAL/NTSC AUDIO  
10  
TITLE  
MENU  
11  
14  
12  
13  
ENTER  
15  
19  
18  
21  
SLOW  
16  
17  
20  
SEARCH  
CH -  
1
CH +  
2
5
8
3
6
9
4
7
VOLUME  
24  
22  
28  
27  
23  
CLEAR  
ZOOM  
0
10+  
-
/
-
-
RESUME  
GOTO  
PBC  
A-B  
25  
26  
29  
30  
RANDOM  
PROGRAM  
REPEAT  
32  
31  
1. POWER  
2. EJECT  
Press  
Press  
to turn the unit ON or OFF.  
to eject the disc.  
3. MUTE  
Press to mute the sound.  
4. SUBTITLE  
Changing of the SUBTITLE language on multi-subtitle lan-  
gauge DVD disc.  
13  
© 2004 Directed Electronics, Inc.  
5. ANGLE  
6. DISPLAY  
7. MODE  
Changing of the view angle on multi-angle DVD disc.  
Display statistical disc information during playback.  
Changing between DVD mode, TV mode and AV mode.  
Display the SETUP menu.  
8. SETUP  
9. PAL/NTSC  
10. AUDIO  
Switch between PAL mode and NTSC mode.  
Changing of the AUDIO soundtrack on multi-audio sound-  
track DVD disc, or changing of the sound mode of the  
VCD/CD discs.  
11. TITLE  
12. MENU  
Display the TITLE menu that is stored in DVD disc.  
Display the adjustment items, such as Bright, Contrast,  
Color, Tint, Transmit, Screen, Search and etc.  
13. W/X/S/T  
In case of SETUP Menu mode, the left/right/up/down  
W/X/S/T buttons served as cursor buttons to select item  
left/right, ahead/back.  
14. ENTER  
Confirm the Track/Chapter selected with the numeric but-  
tons or selected with the cursor buttons on TV screen.  
|
|
15. X/W  
Change the slow forward/reverse playback motion.  
Press to play the disc.  
16.  
17.  
/
Press  
to search forward rapidly and  
to search  
reverse rapidly.  
18.  
(CH+)/  
(CH-)  
Press  
back one track.  
to skip to the next track & press  
to skip  
19. „  
Press to stop playback.  
||  
||  
20.  
Press to pause playback.  
21. 0-9  
Numeric buttons  
22. 10+(-/--)  
23. CLEAR  
Digital selection button, used with numeric buttons.  
Press this button to clear an erroneous numeric entry.  
24. VOLUME +/-  
Press VOLUME +/- button to increase or decrease volume  
level.  
Adjust the following items when MENU has been selected.  
25. ZOOM  
Allows the picture to be increased in size.  
14  
© 2004 Directed Electronics, Inc.  
26. RESUME  
When in stop mode, press the button, the play can be  
resumed from the stop point.  
27. GOTO  
Disc search button, used with numeric buttons.  
Changing between PBC ON and PBC OFF on the VCD disc.  
Allows the track played in random order.  
28. PBC  
29. RANDOM  
30. PROGRAM  
31. REPEAT  
32. A-B  
Allows the track played in the order you programmed.  
Switch the Repeat mode of discs.  
A-B repeat allows a passage to be repeated continuously.  
BATTERY REPLACEMENT  
Use the following procedure to inserting/replacing the batteries  
1. Open the battery compartment cover.  
2. Remove the old batteries and insert the new batteries (two AAA size). Make  
sure that the positive and negative terminals of the batteries are oriented as  
indicated.  
3. Close the cover.  
USING THE REMOTE CONTROL  
Point the remote control towards the player front face IR mark (remote control sig-  
nal receiver).  
Operation angle: The remote will function in about up to a 30 degree angle from  
the front of the IR receiver.  
15  
© 2004 Directed Electronics, Inc.  
Operation  
LOADING/EJECTING A DISC  
When you have installed the unit and all connections have completed, you can load  
a disc as follows:  
1. Turn the ignition on to the accessory position.  
2. Press the POWER button (item 1on the figure below).  
3. Insert the disc with printed side facing up into the disc slot (item 2 on the fig-  
ure below).  
4. The player will start playback automatically.  
1
2
3
button (item 3 on the figure above).  
To eject a disc, press the EJECT  
STOPPING PLAY  
Briefly press the STOP button to stop the unit playback, when the  
PLAY  
button is pressed, normal playback will continue.  
Press STOP button twice to stop the playback and go back to the initial  
Track/Chapter on the disc.  
RAPID FORWARD/REVERSE  
Press  
or  
during play.  
Each time the button is pressed, the speed of rapid forward /reverse changes  
according to the disc as follow:  
DVD:  
Normal playback 2X 4X 6X 8X  
VCD/CD:  
16  
© 2004 Directed Electronics, Inc.  
Normal playback 1X 2X 3X 4X  
MP3:  
Normal playback 2X 4X 6X 8X  
On the next press of the button after reaching the maximum speed, the disc  
resumes normal playback speed.  
SKIPPING TRACK  
Press the  
to skip to next track, and  
or  
buttons on the remote control during playback. Press  
to skip back one track.  
NOTE: For some VCD2.0 discs (PBC-playback control), the  
may be unavailable.  
/
buttons  
SLOW MOTION PLAY  
|
|
Press X or W during playback of a DVD. Each time the button is pressed, the  
speed of slow forward /reverse changes according to the disc as follows:  
DVD:  
Normal Playback 2X  
4X  
8X  
On the next press of the button after reaching the minimum speed, the disc resumes  
normal playback speed.  
PAUSE  
||  
Pressing on the remote control during playback will stop play temporary. Press  
PLAY on the remote control to resume normal playback.  
MUTE  
Will mute the audio, but the disc continues playing. When you unmute the audio  
(press MUTE again), audio will resume.  
17  
© 2004 Directed Electronics, Inc.  
REPEAT  
FOR DVD:  
Press the REPEAT button to cycle through the select repeat mode as follows:  
CHAPTER REPEAT ON—TITLE REPEAT ON—REPEAT OFF  
FOR VCD/CD:  
Press the REPEAT button to cycle through the select repeat mode as follows.  
REP-ONE—REP-ALL—REPEAT OFF  
1. REP ONE—Continuously repeat at the current chapter/track.  
2. REP-ALL—Continuously repeat all chapter/track on the current disc.  
3. When the player finishes playback of the current disc last chapter/track, it will  
stop and display the elapsed time. When REPEAT OFF mode is selected, REP-  
ONE &REP-ALL disappears from screen display.  
4. REPEAT feature does not support VCD2.0 (with PBC ON).  
A-B  
A-B repeat allows a passage to be repeated continuously. Press A-B button at the  
start of the required passage, then press A-B button again at the end of the pas-  
sage. To revert to normal playing, press A-B button again. Each time the button is  
pressed, the screen will display as follows:  
A TO B SET A A TO B SET B A TO B CANCELLED  
DISC SEARCH (GOTO)  
FOR DVD:  
Press GOTO button twice, the screen will display the following message:  
TITLE 01/01 TIME -- : --: --  
00:00:25  
You can select the item you want to watch through the TIME setting by using  
numeric buttons and then the ENTER key.  
18  
© 2004 Directed Electronics, Inc.  
FOR CD/VCD (WITH PBC OFF):  
Press GOTO button once, the screen will display the following message:  
GO TO -- : --  
00:00:25  
Use numeric buttons to input the time directly.  
ZOOM  
Allows the picture to be increased in size. Press ZOOM to toggle among 1.5 scale,  
2.0 scale and 3.0 scale.  
RANDOM  
Press RANDOM button, track selection will be made in random order. The display  
screen will show "SHUFFLE ON" on the screen. Press RANDOM button again, "SHUF-  
FLE OFF" appears and the mode is released.  
PROGRAM  
In stop mode, press PROGRAM button, the screen will display "PROGRAM P00:00".  
For example: press numeric button 4 and  
appears. It means track 4 will be played first.  
PLAY button, "PROGRAM P01:04"  
MODE SELECTION  
Press MOD button on the front panel of the unit or MODE button on the remote con-  
trol to select among DVD, or AV mode. When the mode is selected, the correspon-  
ding mode indicator on the front panel will be illuminated.  
VOLUME LEVEL ADJUSTMENT  
Press VOL +/VOL- on the front panel or VOLUME +/- on the remote control to  
increase or decrease the volume level.  
19  
© 2004 Directed Electronics, Inc.  
LIGHT SWITCH  
The two car dome lamps on the unit will be illuminated depending on the lamp  
operation setting. There are three settings for the car dome lamp operation: OFF,  
AUTO, and ON.  
A. OFF: To turn off the lamp.  
B. AUTO: To make the lamp turn on only when car doors are opened.  
C. ON: To turn on the lamp.  
JACK FOR EARPHONE  
There are two jacks for earphones, one on each side of the DVD unit. You can con-  
nect an earphone to anyone of the jacks to receive audio.  
EARPHONE VOLUME ADJUSTMENT  
Slide the control on the side of the DVD unit to increase or decrease the volume  
level of the earphone.  
REMOTE SENSOR (IR)  
This IR sensor receives it’s signal from the remote control.  
TURNING THE UNIT ON/OFF  
Press the  
POWER button on the front panel or on the remote control to turn the  
unit on or off.  
MONITOR RELEASE  
Press the button on the unit to deploy the screen display from the base of the uni..  
Then the display can easily be adjusted for the best viewing.  
INFRARED TRANSMITTING WINDOW  
There are six infrared transmitting lights inside the window on the unit, the user  
can put on the infrared wireless headphones supplied with the unit and hear the  
audio signal without the use of wires or cables from the unit to the headphones.  
20  
© 2004 Directed Electronics, Inc.  
LCD Menu Operations  
MENU  
Press the MENU button on the unit or on the remote control during DVD or AV mode  
to display a menu of the adjustment items on the screen.  
MENU  
BRIGHT  
CONTRAST  
COLOR  
20  
25  
45  
TINT  
10  
TRANSMIT  
SCREEN  
SEARCH…  
ON  
16:9  
--------------------  
Press MENU button repeatedly to select among BRIGHT, CONTRAST, COLOR and TINT  
(For the unit with NTSC system) items and etc. Press VOL +/- buttons on the unit  
or VOLUME +/- buttons on the remote control to adjust the corresponding item.  
Note: When you set the TV TYPE item to "PAL" in "PREFERENCES SETUP", there is no  
"TINT" item to display.  
TRANSMIT  
The TRANSMIT item, can be set ON or OFF. When set it to ON, the sound signal is  
transmitted from the infrared window on the unit for use with infrared wireless  
headphones.  
SCREEN  
In SCREEN item, you can select appropriate TV aspect ratio (4:3 or 16:9) using the  
VOL +/VOL- buttons on the unit or VOLUME +/- buttons on the remote control.  
SEARCH  
This menu selection is not used with this model.  
21  
© 2004 Directed Electronics, Inc.  
On Screen Displays  
DISPLAY  
Press the DISPLAY button during playback to display the contents of the current  
disc on the screen. The following examples depict the display by disc type.  
DVD  
(1) Press DISPLAY for the first time:  
TITLE 01/03 CHAPTER 002/025  
00:02:25  
The present title number, total number of titles, the present chapter number, the  
total number of chapters of the disc currently being played will be shown on the  
screen, along with the elapsed time.  
(2) Press DISPLAY a second time:  
TITLE REMAIN  
01:46:58  
The remaining playing time for the title presently playing is displayed.  
(3) Press DISPLAY a third time:  
CHAPTER ELAPSED  
00:00:24  
The elapsed playing time for the chapter presently playing is displayed.  
(4) Press DISPLAY a fourth time:  
CHAPTER REMAIN  
00:01:39  
The remaining playing time for the chapter presently playing is displayed.  
(5) Press DISPLAY a fifth time:  
The message is cleared off the screen.  
22  
© 2004 Directed Electronics, Inc.  
VCD  
(1) Press DISPLAY for the first time:  
SINGLE ELAPSED  
00:00:25  
The remaining playing time for the single presently playing is displayed.  
(2) Press DISPLAY a second time:  
SINGLE REMAIN  
00:03:15  
The remaining time for the single presently playing is displayed.  
(3) Press DISPLAY a third time:  
TOTAL ELAPSED  
00:00:25  
The elapsed playing time for the disc presently playing is displayed.  
(4) Press DISPLAY a fourth time:  
TOTAL REMAIN  
00:40:35  
The remaining playing time for the disc presently playing is displayed.  
(5) Press DISPLAY a fifth time:  
The message is cleared off the screen.  
CD  
(1) Press DISPLAY for the first time:  
SINGLE ELAPSED  
00:00:25  
TRACK: 01/14  
The elapsed playing time for the track presently playing is displayed.  
© 2004 Directed Electronics, Inc.  
23  
(2) Press DISPLAY a second time:  
SINGLE REMAIN  
00:03:15  
TRACK: 01/14  
The remaining time for the track presently playing is displayed.  
(3) Press DISPLAY a third time:  
TOTAL ELAPSED  
00:00:25  
TRACK: 01/14  
The elapsed playing time for the disc presently playing is displayed.  
(4) Press DISPLAY a fourth time:  
TOTAL REMAIN  
00:40:35  
TRACK: 01/14  
The remaining playing time for the disc presently playing is displayed.  
(5) Press DISPLAY a fifth time:  
The message is cleared off the screen.  
MP3  
The following applies when the system is set for NO MENU in SMARTNAV, this fea-  
ture is discussed later in this guide.  
(1) Press DISPLAY for the first time:  
24  
© 2004 Directed Electronics, Inc.  
CHAPTER ELAPSED 00:00:25  
TRACK: 01/123  
The elapsed playing time for the chapter presently playing is displayed.  
(2) Press DISPLAY a second time:  
CHAPTER REMAIN 00:04:25  
TRACK: 01/123  
The remaining time for the chapter presently playing is displayed.  
(3) Press DISPLAY a third time:  
The message is cleared off the screen.  
MULTI-AUDIO LANGUAGE FUNCTION  
DVD  
Press the AUDIO button on the remote control during playback. Each time the but-  
ton is pressed, the audio soundtrack language changes in sequential order.  
Note:  
The number of languages on a disc varies according to the disc.  
Some discs only contain one language soundtrack.  
When no different language soundtrack are recorded, the  
played at the screen’s left top corner.  
will be dis-  
VCD/CD  
Press AUDIO on the remote control during playback. It is possible to switch the  
sound between monaural (left/right) and stereo sound, as given below.  
MONO LEFT  
MONO RIGHT  
STEREO  
25  
© 2004 Directed Electronics, Inc.  
TITLE MENU FUNCTION  
This function applies only to DVDs. If the DVD has multiple titles recorded on the  
disc. It can select preferred title from the title menu to start playback.  
1. Press the TITLE button during playback. The title menu is display.  
2. Press the cursor button shown in screen display, select preferred title by the  
cursor button and by pressing the ENTER button.  
MULTI-SUBTITLE LANGUAGE FUNCTION  
This function applies only to DVDs. Press the SUBTITLE button during playback.  
Each time the button is pressed, the subtitle language changes in sequential order.  
Note:  
The number of languages on a disc varies according to the disc.  
Some discs only contain one language soundtrack.  
When no different language soundtrack are recorded, the  
played at the screen’s left top corner.  
will be dis-  
MULTI--ANGLE FUNCTION  
This function applies only to DVDs. Press the ANGLE button during playback. Each  
time the button is pressed, the viewing angle changes in sequential order.  
Note:  
The angle number is different according to the disc.  
The function only works for discs having scenes recorded at different angles.  
When no different angle is recorded, the  
left top corner.  
will be displayed at the screen’s  
26  
© 2004 Directed Electronics, Inc.  
MP3 DISC PLAY  
When a MP3 disc is playing an example of the format of the FOLDER is as follows:  
SMART NAV1  
ROOT  
ROOT  
0
MP3 MUSIC 1  
SKY  
MP3 HEAR YOUR  
PLAY MODE  
DISC  
Use the W/X/S/T buttons on the remote control to select the item or folder,  
then press the ENTER button.  
Each press of the REPEAT button selects one of three repeat play modes, these are:  
REP-ONE: Repeats play of the same song.  
FOLDER REP: Repeats play of all songs in the current directory in sequence.  
FOLDER: Plays all the songs in the current directory once.  
When PLAY MODE is selected, press the S/T buttons to change between the fol-  
lowing modes:  
SINGLE, REP-ONE, FOLDER, FOLDER REP, DISC SCAN, DISC, DISC REP, SHUFFLE ON,  
PROGRAM PXXX  
During the playback, use the S/T buttons to skip an item ahead or back.  
Rapid reverse,  
Rapid advance.  
Note: The FOLDER cannot be selected during playback. It can be selected after the  
Stop button has been pressed.  
TV OPERATION  
This function is not available on this system.  
27  
© 2004 Directed Electronics, Inc.  
Setup  
INITIAL SETUP  
1. Press SETUP in the stop mode. (Press the stop button twice to ensure that the  
player is in STOP mode.) The initial SETUP menu is displayed.  
GENERAL SETUP  
SPEAKER SETUP  
AUDIO SETUP  
PREFERENCES  
EXIT SETUP  
2. Select the preferred item by using the S/T buttons.  
3. Press ENTER button.  
GENERAL SETUP  
This setup page includes all the items of TV (LCD) display & Audio output features.  
For details refer to GENERAL SETUP MENU.  
SPEAKER SETUP  
This is to activate the audio output from DOLBY AC3 5.1 DOWNMIX to 2 channel  
mode. For details refer to SPEAKER SETUP MENU.  
AUDIO SETUP  
This setup page includes all the items for AUDIO. For details refer to AUDIO SETUP  
MENU.  
PREFERENCES SETUP  
This setup page includes the configuration of support features. For details refer to  
PREFERENCES SETUP MENU.  
28  
© 2004 Directed Electronics, Inc.  
GENERAL SETUP  
TV DISPLAY SETUP  
TV DISPLAY  
PIC MODE  
NORMAL/P  
NORMAL/L  
WIDE  
ANGLE MARK  
OSD LANG  
CAPTIONS  
SCR SAVER  
MAIN PAGE  
This is to select the appropriate TV (LCD) aspect ratio (4:3 or 16:9).  
TV Screen  
Video Material  
4:3  
4:3  
Wide (16:9)  
Pan Scan  
Normal  
Letter-box  
16:9  
NORMAL/PS (FOR 4:3 TV)  
Played back in the PAN & SCAN style. (the left and right edges of the image are cut  
off.)  
NORMAL/LB (FOR 4:3 TV)  
Played back in letterbox style. (black bands appear at top and bottom of the  
screen.)  
WIDE (FOR 16:9 TV)  
Select when a wide-screen format.  
29  
© 2004 Directed Electronics, Inc.  
PIC MODE SETUP  
TV DISPLAY  
PIC MODE  
AUTO  
ANGLE MARK  
HI-RES  
OSD LANG  
CAPTIONS  
N-FLICKER  
SCR SAVER  
MAIN PAGE  
Select the AUTO button, the player PIC mode will depend on the formatting of DVD  
disc.  
Select HI-RES format for best image resolution.  
Select N-FLICKER format on image or picture with noise and distortion.  
ANGLE MARK  
TV DISPLAY  
PIC MODE  
ON  
ANGLE MARK  
OFF  
OSD LANG  
CAPTIONS  
SCR SAVER  
MAIN PAGE  
30  
© 2004 Directed Electronics, Inc.  
If it is set to ON, when the multi-angle recorded DVD disc is playing, the  
(the  
angle icon) will appear on the screen; if it is set to "OFF", the mark will not appear.  
OSD LANG  
TV DISPLAY  
PIC MODE  
ANGLE MARK  
ENGLISH  
FRENCH  
GERMAN  
ITALIAN  
OSD LANG  
CAPTIONS  
SCR SAVER  
SPANISH  
MAIN PAGE  
Select the preferred OSD (On Screen Display) language by using the S/T buttons.  
CAPTIONS  
TV DISPLAY  
PIC MODE  
ANGLE MARK  
OSD LANG  
CAPTIONS  
SCR SAVER  
OFF  
ON  
MAIN PAGE  
Activate the CAPTIONS feature by selecting ON. And deactivate this feature by  
selecting OFF.  
31  
© 2004 Directed Electronics, Inc.  
SCR SAVER  
TY DISPLAY  
PIC MODE  
ANGLE  
OSD LANG  
CAPTIONS  
SCR SAVER  
ON  
OFF  
MAIN PAGE  
Select the SCR SAVER ON/OFF.  
SPEAKER SETUP  
LT/RT  
DOWNMIX  
STEREO  
MAIN PAGE  
This is to activate the audio output from DOLBY AC3 5.1 DOWNMIX to 2 channel  
mode.  
32  
© 2004 Directed Electronics, Inc.  
Select the preferred SPEAKER connection by using the cursor buttons.  
Select the LT/RT to activate the Dolby surround-sound compatible output.  
Select the STEREO to activate stereo mode.  
AUDIO SETUP  
AUDIO OUT  
AUDIO OUT  
OP MODE  
DYNAMIC  
LPCM  
ANALOG  
SPDIF/RAW  
SPDIF/PCM  
MAIN PAGE  
This feature is not applicable for this model.  
33  
© 2004 Directed Electronics, Inc.  
OP MODE  
AUDIO OUT  
OP MODE  
DYNAMIC  
LPCM  
LINE OUT  
RF REMOD  
MAIN PAGE  
There are two operating modes for the Dolby Digital decoder: LINE OUT and RF  
REMOD.  
DYNAMIC RANGE CONTROL  
AUDIO OUT  
FULL  
6/8  
OP MODE  
DYNAMIC  
LPCM  
4/8  
2/8  
OFF  
MAIN PAGE  
Select DYNAMIC and adjust the dynamic range of a Dolby Digital encoded program.  
There are 8 steps between full compression and off compression.  
34  
© 2004 Directed Electronics, Inc.  
LPCM OUTPUT  
AUDIO OUT  
OP MODE  
DYNAMIC  
LPCM  
LPCM 48K  
LPCM 96K  
MAIN PAGE  
Select the LPCM OUTPUT between LPCM48K and LPCM 96K.  
PREFERENCES SETUP (INCLUDING PARENTAL)  
TV TYPE SETUP  
AUTO  
NTSC  
PAL  
TV TYPE  
AUDIO  
SUBTITLE  
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULTS  
SMART NAV  
LOGO  
MAIN PAGE  
This system can play discs recorded in either PAL or NTSC format.  
35  
© 2004 Directed Electronics, Inc.  
Select NTSC format, when the unit is connected to NTSC TV.  
Select PAL format, when the unit is connected to PAL TV.  
Select AUTO format, the player TV output format will be according to the DVD disc  
format.  
AUDIO (LANGUAGE)  
TV TYPE  
ENGLISH  
FRENCH  
AUDIO  
SUBTITLE  
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULTS  
SMART NAV  
LOGO  
SPANISH  
CHINESE  
JAPANESE  
GERMAN  
ITALIAN  
MAIN PAGE  
Select the preferred AUDIO language soundtrack by using the cursor buttons.  
36  
© 2004 Directed Electronics, Inc.  
SUBTITLE (LANGUAGE)  
TV TYPE  
AUDIO  
SUBTITLE  
ENGLISH  
FRENCH  
SPANISH  
CHINESE  
JAPANESE  
GERMAN  
ITALIAN  
OFF  
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULTS  
SMART NAV  
LOGO  
MAIN PAGE  
Select the preferred SUBTITLE language by using the cursor buttons.  
DISC MENU (LANGUAGE)  
TV TYPE  
AUDIO  
SUBTITLE  
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULTS  
SMART NAV  
LOGO  
ENGLISH  
FRENCH  
SPANISH  
CHINESE  
JAPANESE  
GERMAN  
ITALIAN  
MAIN PAGE  
Select the preferred DISC MENU language by using the cursor buttons.  
37  
© 2004 Directed Electronics, Inc.  
PARENTAL  
1 G  
TV TYPE  
AUDIO  
2
SUBTITLE  
3 PG  
4 PG 13  
5
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULTS  
SMART NAV  
LOGO  
6 PG-R  
7 NC-17  
8 ADULT  
NO PARENTAL  
MAIN PAGE  
Select suitable parental guidance by the cursor buttons and confirm by pressing  
ENTER button. When the Parental level is changed, the password (described below)  
is required.  
PASSWORD  
TV TYPE  
AUDIO  
SUBTITLE  
DISC MENU  
PARENTAL  
CHANGE  
PASSWORD  
DEFAULTS  
SMART NAV  
LOGO  
MAIN PAGE  
Select CHANGE and press ENTER button. Type the old password (The initial factory  
code is 3308) and key in 4 characters password now you want to use, and retype  
again to confirm key in correctly. Ensure that you write down and keep the new  
password in a secure location.  
38  
© 2004 Directed Electronics, Inc.  
DEFAULTS  
TV TYPE  
AUDIO  
SUBTITLE  
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULTS  
SMART NAV  
LOGO  
RESET  
MAIN PAGE  
Select reset to revert to factory initial settings (except for password).  
SMART NAV  
TV TYPE  
AUDIO  
SUBTITLE  
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULTS  
SMART NAV  
LOGO  
NO MENU  
WITH MENU  
MAIN PAGE  
This feature allows you to select NO MENU mode or WITH MENU mode.  
39  
© 2004 Directed Electronics, Inc.  
LOGO  
TV TYPE  
AUDIO  
SUBTITLE  
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULTS  
SMART NAV  
LOGO  
ORIG LOGO  
CUST LOGO  
MAIN PAGE  
The LOGO feature is inactive.  
40  
© 2004 Directed Electronics, Inc.  
FACTORY DEFAULT SETTING  
The following table lists the factory default settings for each setup feature.  
Menu Screen  
General Setup  
Sub-Menu  
TV Display  
PIC mode  
Angle mark  
OSD Language  
Captions  
SCR Saver  
Downmix  
Audio Out  
OP Mode  
Dynamic  
Default Setting  
Normal/LB  
AUTO  
ON  
English  
ON  
ON  
Speaker Setup  
Audio Setup  
Stereo  
SPDIF/RAW  
Line Out  
FULL  
LPCM Output  
TV Type  
LPCM 96K  
AUTO  
Preferences  
Audio  
English  
English  
English  
NO Parental  
3308  
Subtitle  
Disc Menu  
Parental  
Password  
SmartNav  
Logo  
With Menu  
Orig Logo  
41  
© 2004 Directed Electronics, Inc.  
Appendix A – Cleaning  
CLEANING THE LCD SCREEN  
CAUTION: To avoid possible shock hazard and equipment damage, be sure the LCD sys-  
tem is turned off and unplugged from the main electrical outlet before cleaning.  
CAUTION: Do not use any form of solvents on the LCD screen or enclosure.  
1. Use a soft, clean & dry cloth to gently wipe off the dust on the LCD screen.  
2. Use a clean cloth dampened with water to wipe off the dirt.  
3. Do not exert excessive force when cleaning the LCD screen.  
CLEANING THE ENCLOSURE  
1. Use a soft, clean & dry cloth to gently wipe off the dust on the enclosure.  
2. Use a clean cloth dampened with water to wipe off the dirt.  
3. Do not exert excessive force when cleaning the enclosure.  
CLEANING AND HANDLING DISCS  
HANDLING  
Dirt, dust, scratches and warping discs will cause misoperation.  
Do not place stickers or make scratches on discs.  
Do not warp discs.  
A disc should always be kept in its case when not in use to prevent from dam-  
aging.  
Do not place discs in the following places:  
1. Direct sunlight.  
2. Dirty, dusty and damp areas.  
3. Near car heaters.  
4. On the seats or dashboard.  
DISC CLEANING  
42  
© 2004 Directed Electronics, Inc.  
Use a dry soft cloth to wipe the surface. If the disc is quite dirty, use a soft cloth  
slightly moistured with isopropyl (rubbing) alcohol. Never use solvents such as ben-  
zine, thinner or conventional record cleaners as they may mar the surface of the  
disc.  
Note: A disc may become somewhat scratched (although not enough to make it unus-  
able) depending on you handle it and conditions in the usage environment. These  
scratches are not an indication of any problem with the player.  
43  
© 2004 Directed Electronics, Inc.  
Appendix B – Troubleshooting  
If the unit fails to operate normally, try solving the problems using the procedures  
below. If the prroblem persists, switch off the unit and ask the dealer or technical  
services for assistance. Do not attempt to repair or open the defective unit as high  
voltage is present inside the unit.  
1. No Power  
a. Check to ensure that the On/Off button on the front of the unit is On.  
b. Check power wiring to the unit.  
2. No Picture  
a. Check that all cables are connected and the LED is illuminated on the  
control panel above the LCD screen.  
b. Be sure you have selected the correct source mode (AV, DVD).  
3. Distorted Picture  
a. Check disc for contamination and clean with soft cloth, wiping from center  
to edge.  
b. Sometimes a small amount of picture distortion may appear, this is not a  
malfunction of the player.  
4. Severely Distorted Picture or No Color in Picture  
a. The disc format is not compatible with the player (PAL/NTSC).  
5. DVD Player Not Working Properly  
a. Ensure disc is correctly inserted into the unit.  
b. Inspect the disc is not damaged (no scratches on the recorded side of the  
disc) and is of correct format to play in the unit.  
c. Please wait as some disc requires longer time to read-in prior to playing.  
d. Eject and re-insert disc.  
6. Picture flickers  
a. Check that the power coming from the main socket is sufficient.  
b. Check that unit is not placed too near speakers or magnetic objects.  
c. Check to see that the unit settings are correct.  
7. Start-Up Screen doesn’t display when disc is removed  
a. Press the Power button to turn the unit off, then press it again to turn the  
power back on.  
8. No sound  
a. Check audio connections.  
b. Volume set too low, increase the volume setting.  
9. No audio at digital output  
44  
© 2004 Directed Electronics, Inc.  
a. Check digital connections.  
b. Check the Digital Audio menu setup to ensure that the digital output is  
correctly set.  
c. Check if the audio format of the selected audio language matches your  
systems capabilities.  
10. Remote control not working.  
a. Check to verify that the batteries are installed correctly (polarities aligned  
with case markings), replace if necessary (2-AAAs).  
b. Make sure that the remote control is pointed towards the remote sensor  
located on the system.  
11. Buttons do not work.  
a. Turn the unit off and then back on with the power On/Off button at the  
front of the unit.  
45  
© 2004 Directed Electronics, Inc.  
Appendix C – Specifications  
Signal System  
Composite video 1.0Vp-p @ 75 ohms  
Discs compatability  
DVD video disc  
5” (12cm) single-sided, single-layer  
5” (12cm) single-sided, double-layer  
CD-DA/CD-R/CD-RW/MP3 compact disc  
Video CD 5” (12cm)  
Audio output  
Wireless audio  
10Kohms (2ch 2.0 Vrms)  
20Hz—20kHz  
80 dB (JIS) S/N ratio  
Wow & Flutter—below measurable limits  
Infrared audio transmitter (support IR  
receiver stereo headphone, L-channel 2.3  
MHz/R-channel 2.8 MHz)  
Effective listening angle: 30°  
Effective range: 4 meters  
Operating voltage  
Operating current  
9–16 VDC  
Less than 2A  
NOTE: All specifications are subject to change without notice.  
46  
© 2004 Directed Electronics, Inc.  
The company behind this system is Directed Electronics, Inc.  
Since its inception, Directed has had one purpose, to provide consumers with the finest vehicle security, car stereo  
products, rear seat entertainment, and accessories available. The recipient of more than 20 patents in the field of  
advanced electronic technology, Directed is ISO 9001 registered.  
Quality Directed Electronics products are sold and serviced throughout North America and around the world.  
Call (800) 274-0200 for more information about our products and services.  
Directed® is committed to delivering world-class quality products  
and services that excite and delight our customers.  
Directed Electronics, Inc.  
Vista, CA 92081  
© 2004 Directed Electronics, Inc.—All rights reserved  
N83070 12-04  

BlueAnt Wireless Bluetooth SuperTooth II User Manual
Bosch Appliances R 40 HE User Manual
Bryan Boilers DSH 20 User Manual
Canon GL2 User Manual
Cavalry Storage Blu ray Player User Manual
Directed Video OHW17 User Manual
FujiFilm Camera Lens YF8A 2 User Manual
Gitzo Classic Sport G1226 User Manual
HP (Hewlett Packard) Hewlett Packard Car Video System LA22F User Manual
JVC Everio GZ HD10 User Manual