O W N E R ’ S G U I D E
INSTALLATION GUIDE
Headrest Video Monitor
MODEL HVM500
Table of Contents
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
When Cleaning the Vehicle ..........................................................................................................5
While Driving ............................................................................................................................5
When Parked .............................................................................................................................5
Proper Use ...............................................................................................................................5
Repairs .....................................................................................................................................5
Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
FCC Notice ................................................................................................................................6
Your Warranty ...........................................................................................................................6
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Features ...................................................................................................................................6
Accessories ...............................................................................................................................6
Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Monitor Description ...................................................................................................................7
Viewing Angle ...........................................................................................................................7
Maintenance ............................................................................................................................7
On-Screen Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Making Changes to System Settings .............................................................................................8
Setup Menu Descriptions and Operation ........................................................................................9
System Settings Menu ................................................................................................................10
Hardware Options Menu ..............................................................................................................10
Assign Source Names Menu .........................................................................................................11
Assign Trigger Names Menu .........................................................................................................12
Source Names ...........................................................................................................................12
Trigger Names ...........................................................................................................................12
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Monitor Specifications ................................................................................................................13
Installation Options ...................................................................................................................13
Installation ..............................................................................................................................13
Wiring Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Wiring Precautions .....................................................................................................................14
Wire and AV Connectors...............................................................................................................14
3
© 2001 Directed Electronics, Inc.
Limited Three-Year Warranty
For a period of THREE YEARS from the date of purchase,
Directed Electronics, Inc. ("DIRECTED") promises to the
original purchaser to repair or replace, free of cost, with a
comparable reconditioned model any VIDEO MONITOR
(hereafter the "UNIT"), which proves to be defective in
workmanship or material defect under normal and reason-
able use during the first 3 years after the purchase and
installation of the unit provided the following conditions
are met: the unit was purchased and installed by an author-
ized DIRECTED dealer; the unit remains in the vehicle in
which the unit was originally installed; and the unit is
returned to DIRECTED. The unit in question must be
returned to DIRECTED postage paid and must be accompa-
nied by a clear, legible copy of the bill of sale bearing the
following information:
troubleshooting or reinstallation of the unit. For service on
an out-of-warranty product a flat fate fee by model is
charged. Contact your authorized dealer to obtain the serv-
ice charge for your unit.
TO THE MAXIMUM EXTENT ALLOWED BY LAW, ALL WAR-
RANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS WAR-
RANTY, IMPLIED WARRANTY, WARRANTY OF MER-
CHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND
WARRANTY OF NON-INFRINGEMENT OF INTELLECTUAL
PROPERTY, ARE EXPRESSLY EXCLUDED; AND DIRECTED
NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR
ENTITY TO ASSUME FOR IT ANY DUTY, OBLIGATION OR
LIABILITY IN CONNECTION WITH ITS PRODUCTS. DIRECT-
ED DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR
ANY AND ALL ACTS OF THIRD PARTIES INCLUDING DEAL-
ERS OR INSTALLERS. IN THE EVENT OF A CLAIM OR A DIS-
PUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE
PROPER VENUE SHALL BE SAN DIEGO COUNTY IN THE
STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND
APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN
THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY
CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED
TO THE AUTHORIZED DIRECTED DEALER'S PURCHASE
PRICE OF THE UNIT. DIRECTED SHALL NOT BE RESPONSI-
BLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT
NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCI-
DENTAL DAMAGES, DAMAGES FOR THE LOSS OF TIME,
LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECO-
NOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING
THE ABOVE, THE MANUFACTURER DOES OFFER A LIMITED
WARRANTY TO REPLACE OR REPAIR THE CONTROL MOD-
ULE AS DESCRIBED ABOVE. Some states do not allow lim-
itations on how long an implied warranty will last or the
exclusion or limitation of incidental or consequential dam-
ages. This warranty gives you specific legal rights and you
may also have other rights that vary from State to State.
DIRECTED does not and has not authorized any person or
entity to create for it any other obligation, promise, duty
or obligation in connection with this UNIT.
I
Date of Purchase
I
Your Full name and address
I
Authorized dealer's company name and address
I
Type of unit installed
I
Year, make and model of the automobile
I
Automobile license number
I
Vehicle Identification number
I
Installation receipts
All components and accessories other that the unit, includ-
ing without limitation the remote control, cables and
installation accessories carry a 60-day warranty from the
date of purchase of the same.
This warranty is automatically void if the unit is bought
from anyone other than an authorized dealer, the unit's
date code or serial number is defaced, missing or altered;
the unit has been modified or used in a manner contrary to
its intended purpose; or the unit has been damaged by
accident, unreasonable use, neglect, improper service,
installation or other causes not arising out of defects in
workmanship, materials or construction. This warranty is
nontransferable and does not cover batteries. This warran-
ty does not cover labor costs for the removal, diagnosis,
4
© 2001 Directed Electronics, Inc.
Safety Instructions
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING
INTERFERENCE, USE ONLY THE INCLUDED HARDWARE.
THIS MONITOR IS ONLY DESIGNED FOR REAR SEAT PASSENGER VIEWING AND IS NOT
INTENDED FOR VIEWING BY THE DRIVER WHILE THE VEHICLE IS IN MOTION. SUCH USE MAY
DISTRACT THE DRIVER OR INTERFERE WITH THE SAFE OPERATION OF THE VEHICLE, AND
MAY ALSO VIOLATE STATE LAW.
DIRECTED ELECTRONICS, INC. DISCLAIMS ANY LIABILITY FOR ANY BODILY INJURY,
INCLUDING FATALITIES, OR PROPERTY DAMAGE THAT MAY RESULT FROM ANY IMPROPER OR
UNINTENDED USES OF THIS PRODUCT.
I
I
Only operate the monitor as described in this
guide. Attempts to use or modify this moni-
tor contrary to the descriptions in this guide
may cause damage and void the warranty.
Exposure to moisture or dust can cause
harmful damage to the internal electron-
ics. Do not mount near cup holders or in
areas where spills may occur.
I
I
I
Extremes in temperature can cause abnor-
mal display operation. This monitor has an
optimal operating temperature range
between 35-115 degrees Fahrenheit. If the
vehicle interior is outside this range, do
NOT operate the monitor until the temper-
ature is within its operating range.
This monitor is designed for use in vehi-
cles with standard (-) 12 volt ground elec-
trical systems.
Do not operate for an extended period of
time without the engine running or the
vehicle’s battery voltage may drop to dam-
aging levels.
Important Safeguards
WHEN CLEANINGTHE VEHICLE
PROPER USE
Do not spray this unit with water or cleaning Do not touch the screen unless cleaning with a
solutions. Moisture and the chemicals found in soft dry cloth. Do not pull or hang from the fold
cleaning fluids could damage the consoles finish down monitor door.
and interior electronics.
REPAIRS
WHILE DRIVING
If the monitor stops working for any reason, dis-
continue use immediately and consult with your
retailer about any necessary repairs.
This unit is intended for use in the rear seat area
only, and should not be installed in a location that
would allow the driver to view it while driving.
5
© 2001 Directed Electronics, Inc.
Important Information
FCC NOTICE
YOUR WARRANTY
This device complies with Part 15 of FCC rules.
Operation is subject to the following two condi-
tions: (1) This device may not cause harmful
interference, and (2) this device must accept
any interference received, including interfer-
ence that may cause undesired operation.
Your warranty registration must be completely
filled out and returned within 10 days of pur-
chase. Your product warranty will not be vali-
dated if your warranty registration is not
returned. Make sure you receive the warranty
registration from your dealer. It is also neces-
sary to keep your proof of purchase, which
reflects that the product was installed by an au-
thorized dealer.
Changes or modifications not expressly
approved by the party responsible for compli-
ance could void the user's authority to operate
this device.
Features
FEATURES
ACCESSORIES
I
I
5.0" LCD screen with pivot.
Mounting bezel.
I
I
RCA video inputs for system flexibility.
Trim ring.
I
I
Easy to use adjustment controls.
Din-to-RCA cable, 5 meter.
I
I
Wireless IR remote control receiver built-in.
Screws and other mounting hardware.
I
Adjustable tilt trim bezel.
NOTE: This product requires specialized tools and instal-
lation techniques; Directed recommends that this
monitor be installed by a retailer that employs
MECP (Mobile Electronics Certification Program)
installers. Contact your retailer for details.
I
Front panel headphone output jack.
I
Front panel AV input jack.
I
Custom mounting trim ring for installation
flexibility.
I
Note: This manual makes reference to optional Directed
Video parts not included with this product.
Active matrix color TFT LCD.
I
Front panel controls.
I
On-screen display/programming.
6
© 2001 Directed Electronics, Inc.
Basic Operation
3 1
6
7 9
6
5 4
8
2
9. LED indicator light - when turned on the
light is blue; when on standby the light is
red.
MONITOR DESCRIPTION
1. Screen - TFT active matrix LCD screen.
2. Input jack - for audio/video source.
VIEWING ANGLE
3. Power/Source button - press to turn the
monitor on/off or change video source.
The picture viewing angle can be easily adjust-
ed by pressing against the top or bottom of the
monitor bezel.
I
Press to turn the monitor on.
I
Press for more than three seconds to
turn the monitor off.
I
Press for less than three seconds
MAINTENANCE
when on to change the source.
4. Headphone jack - insert the headphone
plug to listen to audio.
Keep the monitor clean and free of dust and
moisture and it will provide years of trouble-free
operation. Do not allow any cleaning fluids on
the monitor screen or bezel; they may contain
chemicals that can harm the finish and diminish
the picture quality.
5. IR remote input - for remote control
operation.
6. Up/down buttons - volume and picture
adjustment.
I
Default volume control.
I
Adjusts programming when MODE is
pressed.
To clean the monitor, simply use a soft, dry
cloth and gently wipe away any dirt. Avoid
applying too much pressure to the screen when
cleaning as it can result in damage.
7. Mode button - changes up/down buttons
functions.
8. Monitor Insert Cover
7
© 2001 Directed Electronics, Inc.
On-Screen Menus
The Setup Menu is a list of programming selec- 1. Press MODE to enter the Setup Menu.
tions that control system operation and screen
settings.
2. Press UP or DOWN to highlight the selection.
3. Press MODE to enter that selection menu.
4. Press UP or DOWN to highlight the setting.
Each selection has a list of settings that can be
changed to optimize system operation.
5. Press MODE to change the setting, display
additional settings menus, or toggle
through a list of possible settings.
Some settings may have additional settings.
Notes that include any specific programming
instructions for these are included under the
selection heading.
USINGTHE UNIVERSAL REMOTE CONTROL
(Included with MCB1000)
NOTE: For a guide to remote control button locations
refer to the MCB1000 guide.
SETUP MENU
1. Press MENU to enter the Setup Menu.
2. Press (+) or (-) to highlight the selection.
3. Press MENU to enter that selection menu.
4. Press (+) or (-) to highlight the setting.
5. Press MENU to change the setting, display
additional setting menus, or toggle through
a list of possible settings.
1. Channel - only appears if the TVM300 TV
EXITING MENUS
tuner is connected and TV is the source.
After making setting changes, use the following
steps to exit the menus.
2. Security - only applies when ESP/ESP2
security systems are connected; only ESP2
will display trigger zones.
1. Highlight BACK, press the monitor’s MODE
button or the remote’s MENU button to
return to the previous menu
3. Setup - only appears if the MCB 1000
Expanded Menu switch is on.
2. Highlight EXIT, press the monitor’s MODE
button or the remote control’s MENU
button or make no entry for eight seconds,
you will exit all menus and return to the
current video source display.
MAKING CHANGESTO SYSTEM
SETTINGS
USINGTHE MONITOR CONTROL BUTTONS
NOTE: For a guide to monitor button locations refer to
Basic Operation section of this guide.
8
© 2001 Directed Electronics, Inc.
SETUP MENU DESCRIPTIONS AND OPERATION
Following are explanations of the many settings that can be changed to customize the operation of
your Rear Seat Entertainment system. To change the settings described, follow the directions in the
on-screen menu’s section or the special instructions in each menu.
SELECTION
DESCRIPTION AND OPERATION
I
VOLUME
Adjust the volume of the headphone jack.
Use the monitors UP/DOWN or the remote’s (+)
I
(-) buttons to adjust the volume.
I
CHANNEL (TVM300 ONLY)
DIMMER
Change TV channels.
Use CHDN/CHUP buttons to change channels
I
I
Change illumination for day or night viewing.
HIGH - Sets illumination for viewing in daylight.
I
I
MEDIUM - Sets illumination for viewing in twilight.
I
LOW - Sets illumination for viewing at night.
I
PICTURE
Select to adjust picture.
BRIGHTNESS - Adjusts picture brightness.
COLOR - Adjusts picture color.
CONTRAST - Adjusts picture contrast.
I
Note: To adjust use the
monitor’s UP/DOWN buttons
or the remote's (+)/(-)
buttons.
I
I
I
HUE - Adjusts picture hue (NTSC only).
I
OSD COLOR
Select to change the color of the on-screen display.
WHITE - Changes the OSD to White.
I
I
GREEN - Changes the OSD to Green.
I
BLUE - Changes the OSD to Blue.
I
SECURITY (ESP/ESP2 ONLY)
NOTE: This menu contains
selections that have addi-
tional settings.
ESP/ESP2 programming and zone information.
TRIGGER INFORMATION - Displays ESP/ESP2 zone infor
mation. (Always displays the last zone triggered only.)
See the Assign Trigger Names menu.
I
I
SYSTEM SETTINGS - Displays the System Settings
menu. See the System Settings menu.
I
SETUP (MCB1000 ONLY)
NOTE: This menu contains
Change hardware settings and rename zones.
HARDWARE OPTIONS - Displays the Hardware
I
selections that have additional
settings. This menu is used for
initial system setup only.
Options menu. See the Hardware Options menu.
ASSIGN SOURCE NAMES - Displays the Source
Names menu. See the Source Names menu for a
list of names.
I
I
ASSIGN TRIGGER NAMES - Displays the Trigger
Names menu. See the Trigger Names menu.
9
© 2001 Directed Electronics, Inc.
IMPORTANT!
Any changes in the following menus must be written into the MCB1000 and ESP/ESP2
software. Before the menu is exited the Write to System procedure must be completed.
SYSTEM SETTINGS MENU
SELECTION
DESCRIPTION AND OPERATION
PASSIVE/ACTIVE ARMING
Program the ESP/ESP2 security system to arm by itself
(passive) or if its remote must be used for arming
(active). For a full description of this setting refer to
your ESP/ESP2 owner’s guide.
CHIRPS ON/OFF
This feature will turn the arming and disarming chirps
on/off. For a full description of this setting refer to the
ESP/ESP2 owner’s guide.
IGNITION LOCK ON/OFF
IGNITION UNLOCK ON/OFF
PASSIVE/ACTIVE LOCKING
When turned on, the doors will lock three seconds after
the ignition is turned on. For a full description of this
setting refer to the ESP/ESP2 owner’s guide.
When turned on, the doors will unlock when the ignition
is turned off. For a full description of this setting refer
to the ESP/ESP2 owner’s guide.
This feature controls whether the doors will lock when
the ESP/ESP2 security system passively arms itself. For a
full description of this setting refer to your ESP/ESP2
owner’s guide.
I
WRITE TO SYSTEM
Highlight WRITE TO SYSTEM, press the monitor’s
MODE button or the remote's MENU button to
enter the system changes.
WRITING TO SYSTEM will be displayed.
I
I
WRITE SUCCESSFUL - Information entered successfully.
I
WRITE FAILED - Information not entered successfully.
HARDWARE OPTIONS MENU
SELECTION
DESCRIPTION AND OPERATION
I
I
POWER AUTO OFF
Select to choose POWER AUTO OFF or POWER LAST STATE.
POWER AUTO OFF - When the key is turned on the
system power will remain off, regardless of the sys-
tem on/off state when the key was turned off.
POWER LAST STATE - When the key is turned on the
system will automatically return to the power
on/off state it was in when the key was turned off.
I
10
© 2001 Directed Electronics, Inc.
I
I
FM MODULATOR
Select to let the MCB1000 know an FM modulator is
connected.
FM MODULATOR - allows the universal remote to turn
the FM modulator on/off.
I
I
NO FM MODULATOR - FM modulator control is defeated.
This FM Modulator function only applies when the
RFM100 is connected.
I
I
ANTENNA TV
Select to choose Antenna or Cable input to TVM300.
Select ANTENNA TV when the TVA10 antenna is con-
nected to the TVM300.
I
Select CATV when using a cable TV connection to
the TVM300.
I
I
CATV STD
Choose between three types of cable TV setups.
WRITE TO SYSTEM
Highlight WRITE TO SYSTEM, press the monitor’s
MODE button or the remote's MENU button to
enter the system changes.
I
I
I
WRITING TO SYSTEM will be displayed.
WRITE SUCCESSFUL - Information entered successfully.
WRITE FAILED - Information not entered successfully.
ASSIGN SOURCE NAMES MENU
NOTE: In this menu use the monitor’s MODE button or the remote’s MENU button to toggle through the available
choices for source names.
SELECTION
DESCRIPTION AND OPERATION
SOURCE 1: AV1
Select to change the name of source 1 from the source
names list at the end of this section.
SOURCE 2: AV2
SOURCE 3: AV3
WRITE TO SYSTEM
Select to change the name of source 2 from the source
names list at the end of this section.
Select to change the name of source 3 from the source
names list at the end of this section.
I
Highlight WRITE TO SYSTEM, press the monitor’s
MODE button or the remote's MENU button to
enter the system changes.
WRITING TO SYSTEM will be displayed.
I
I
WRITE SUCCESSFUL - Information entered successfully.
I
WRITE FAILED - Information not entered successfully.
11
© 2001 Directed Electronics, Inc.
ASSIGNTRIGGER NAMES MENU
NOTE: In this menu use the monitor’s MODE button or the remote’s MENU button to toggle through the available
choices for zone names.
SELECTION
DESCRIPTION AND OPERATION
ZONE 1
Select to change the name of zone 1 from the zone names
list at the end of this section.
ZONE 2
ZONE 3
ZONE 4
Shock sensor - Can not be changed.
Door switch - Can not be changed.
Select to change the name of zone 4 from the zone names
list at the end of this section.
ZONE 5
ZONE 6
Ignition - Can not be changed.
Select to change the name of zone 6 from the zone names
list at the end of this section.
ZONE 7
Select to change the name of zone 7 from the zone names
list at the end of this section.
ZONE 8
Select to change the name of zone 8 from the zone names
list at the end of this section.
I
WRITE TO SYSTEM
Highlight WRITE TO SYSTEM, press the monitor’s
MODE button or the remote's MENU button to
enter the system changes.
WRITING TO SYSTEM will be displayed.
I
I
WRITE SUCCESSFUL - Information entered successfully.
I
WRITE FAILED - Information not entered successfully.
.
SOURCE NAMES
TRIGGER NAMES
I
I
SOURCE X: VCR
ZONE X: HOOD/TRUNK SWITCH
I
I
SOURCE X: DVD
ZONE X: HOOD SWITCH
I
I
SOURCE X: GAME
ZONE X: TRUNK SWITCH
I
I
SOURCE X: CAMERA
ZONE X: FIELD SENSOR
I
I
SOURCE X: REAR CAMERA
ZONE X: MOTION/TILT SENSOR
I
I
SOURCE X: AUX INPUT PANEL
ZONE X: GLASS BREAK SENSOR
I
ZONE X: SHOCK SENSOR 2
12
© 2001 Directed Electronics, Inc.
Installation
MONITOR SPECIFICATIONS
6. Route the cable through the headrest
access hole and the rear opening of the
mounting bezel. Leave enough slack in the
cable for monitor installation.
Screen size
Resolution
View angle
5"
74,880 pixels
7. Install the bezel. Some headrests have
material that is strong enough to screw
the bezel into. Others will require quality
adhesive for mounting.
Top 30 degrees
Bottom 10 degrees
Left 45 degrees
Right 45 degrees
8. Route the cable through the seat cover
and reinstall the headrest. Leave enough
slack in the cable so the headrest still has
full movement during adjustment.
Video system
ntsc/pal
English
Osd language
Power requirements
Operating temp.
10 - 15 vdc
9. Install the monitor into the mounting
bezel and adjust to the proper angle.
35 - 115 degrees
fahrenheit
10. Complete the cable routing to the video
source.
INSTALLATION OPTIONS
The Directed HVM 500 5" monitor comes with a
mounting bezel designed for headrest installations.
INSTALLATION
1. Remove the headrest cover to determine if
it has room in it for the monitor without
structurally weakening it.
2. With the cover still removed, position the
cutout template against the rear of the
headrest and mark the area to be cut out.
3. Remove the material to a depth sufficient
for the lip of the mounting bezel to fit
flush against the rear of the headrest once
installed.
4. Cut an access hole for the cable to exit
next to the headrest adjustment bar.
5. Reinstall the headrest cover. Trim it to the
size of the mounting bezel hole. When
trimming, it is best to leave extra materi-
al that can be glued into the hole before
installing the mounting bezel.
13
© 2001 Directed Electronics, Inc.
Wiring Guide
WIRING PRECAUTIONS
I
Route all wires and cables away from areas
where they could be pinched, punctured.
or chafe against sharp metal causing short
circuits.
Read all wiring information before attempting to
install this monitor.
I
I
All wires should be properly loomed and
fused at the source.
I
Use only solder and tape or quality solder-
less connectors when terminating wires.
Incorrect or poor connections may cause
damage to the monitor or the vehicle.
It is recommended that you have your
authorized retailer install this monitor.
I
Disconnect the ground wire from the bat-
tery or remove the fuses for any impacted
circuits before making any connections.
WIRE AND AV CONNECTORS
1. Monitor DIN Cable
6. Video Input RCA (YELLOW)
2. DIN-to-RCA Cable
7. Black Wire - Connect to chassis ground.
3. IR Remote Connector
4. Audio Input RCA (RED)
5. Audio Input RCA (WHITE)
8. Red Wire - Connect to a fused (+) 12 volt.
ignition accessory wire that turns off with
the key.
14
© 2001 Directed Electronics, Inc.
The company behind this system is Directed Electronics, Inc.
Since its inception, Directed has had one purpose, to provide consumers with the finest vehicle security, car stereo
products, rear seat entertainment, and accessories available. The recipient of more than 20 patents in the field of
advanced electronic technology, Directed is ISO 9001 registered.
Quality Directed Electronics products are sold and serviced throughout North America and around the world.
Call (800) 274-0200 for more information about our products and services.
Directed® is committed to delivering world-class quality products
and services that excite and delight our customers.
Directed Electronics, Inc.
Vista, CA 92083
© 2001 Directed Electronics, Inc. - All rights reserved
N81101 Rev. 1.0 12-01
|