Curtis Mathes CMMBX130 User Manual

CMMBX130 Operating Manual  
This manual contains important information for the setup and  
operation of your new Curtis Mathes Blu-ray Disc player. Keep  
this manual handy during setup and troubleshooting to help you  
connect your Blu-ray player to your TV and other AV equipment  
and to help you answer any operating questions you may have.  
Table of Contents  
Introduction  
Important Safety Precautions  
Important Safety Instructions  
Other Operating Precautions  
Features  
2
3
4
4
5
6
Front and Rear Panel Components  
Remote Control Buttons and Operations  
Connecting Your Blu-ray Player  
7
8
Connecting to Your Television Set  
Connecting to Your Digital Audio System  
Advanced Features  
9
Remote Control Button Definitions  
Blu-ray Player Settings and Customizations  
12  
Troubleshooting and Specifications  
Troubleshooting  
19  
20  
Specifications  
1
Important Safety Precautions  
Please read the manual carefully before using this DVD player, and keep it safe for future reference.  
WARNING  
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).  
NO USER - SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
The lightening fl ash and  
Arrowhead within triangle is  
a warning sign alerting you of  
dangerous voltage inside the  
product.  
To reduce the risk of electric shock, do The exclamation point within  
not remove the cover (or back) no  
the triangle is a warning sign  
user - serviceable parts are inside. referalerting you of important  
servicing to qualified service  
personnel.  
instructions accompanying the  
product.  
Warning  
In order to prevent the risk of fire or electric shock, do not expose the machine to rain or any moisture. Do not  
open the case of the unit because of the risk of electric shock. Repair work must be undertaken by qualified  
personnel.  
Caution  
If the unit is moved from a cold to warm environment condensation may develop on the lens of the laser. To  
ensure correct operation switch the unit off and leave it for one hour before using.  
Caution  
This DVD player has a laser system.  
Please note that hazardous radiation leakage may be caused if the player is misused in anyway. Do not defeat  
the safety interlocks.  
Do not open the case of the player. The laser light will become visible when the case is opened.  
Warning  
This machine may malfunction if it is modified or repaired by unauthorized persons.  
・ The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,  
shall be placed on the product.  
・ Must be shown how can operate the product via the MODE and Vol+ and Vol- button for the unit complete the  
function.  
CLASS 1  
CLASS 1 LASER PRODUCT  
LASER PRODUCT  
Use of controls, adjustments or performance of procedures other than those specified herein may result in  
hazardous radiation exposure.  
2
11.  
Please follow it strictly.  
12.  
4.  
13.  
5.  
6.  
14.  
15.  
7.  
16.  
17.  
8.  
9.  
10.  
18.  
3
Important Operating Precautions  
Please use the original box and packing materials for safe transportation of this  
product.  
It is normal for the cover and rear panel to become warm after the player has been  
operation for an extended period of time.  
Do not move this product during playback. Doing so may cause damage to the  
pickup and the disc.  
Press OPEN/CLOSE on the front panel or remote to open or close the disc tray.  
Do not push or touch the tray while it is opening or closing.  
Introduction  
Features  
Disc formats supported by this player:  
BD-ROM  
Subtitle choices  
32  
Dolby Digital  
DVD video  
Audio choices  
8
TV Aspect Ratio modes  
LB  
16:9  
Parental Lock  
R
RESTRICTED  
Multi-angle  
9
This product incorporates copyright protection technology that is protected by method claims of  
certain U.S.patents and other intellectual property rights owned by Macrovision Corporation and other  
rights owners.Use of this copyright protection technology must be authorized by Macrovision  
Corporation, and is intendedfor home and other limited viewing uses only unless otherwise authorized  
by Macrovision Corporation.Reverse engineering or disassembly is prohibited.  
Manufactured under license from Dolby Laboratories."Dolby" and the double-D symbol are trademarks of  
c
Dolby Laboratories. Confidential Unpublished Works. 1992-1997 Dolby Laboratories, Inc. All rights reserved.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)  
this device may not cause harmful interference, and(2) this device must accept any interference received,  
including interference that may cause undesired operation.  
4
Front and Rear Panel Components  
Front panel  
10  
1
2
3
4
5 6  
7
8
9
9
1
2
3
4
5
6
SENSOR  
PREV BUTTON  
NEXT BUTTON  
POWER  
10  
CABIN DOOR  
OPEN/CLOSE BUTTON  
PLAY/PAUSE BUTTON  
STOP BUTTON  
BD LIGHT  
7
8
VFD SCREEN  
Rear panel(2CH Audio output)  
1
2
3
4
5
6
7
2 CH Audio output(L,R)  
COMPOSITE VIDEO output  
1
3
5
7
2
Component Video output (Y, Pb, Pr)  
Digital Audio COAXIAL output  
HDMI output  
4
6
Digital Audio OPTICAL output  
SERVICE  
Rear panel(7.1CH Audio output)  
HDMI OUT(1080P)  
DIGITAL AUDIO OUT  
SERVICE  
1
2
3
4
5
6
7
7.1 CH Audio output  
(SR,SL,RR,RL,SW,CEN,FR,FL)  
COMPOSITE VIDEO output  
1
2
3
5
7
Component Video output (Y, Pb, Pr)  
Digital Audio COAXIAL output  
HDMI output  
4
6
Digital Audio OPTICAL output  
SERVICE  
5
Remote Control Buttons and Operations  
Remote Control  
OPEN/CLOSE  
AUDIO  
STANDBY  
ANGLE  
OPEN/CLOSE  
STANDBY  
20  
21  
22  
1
SUBTITLE  
AUDIO  
2
3
ANGLE  
POP MENU/TITLE MENU  
RANDOM  
SUBTITLE  
RANDOM  
MENU  
4
5
POP MENU/TITLE  
SECONDARY AUDIO  
6
BONUS  
VIEW  
SECONDARY  
AUDIO  
SECONDARY  
SUBTITLE  
7
8
23  
24  
MOVE(  
SETUP  
STEP  
REV  
)
COLOUR (RED,  
GREEN, YELLOW, BLUE)  
ENTER  
9
SECONDARY SUBTITLE  
BONUS VIEW  
SETUP  
DISPLAY  
25  
26  
STEP  
FWD  
SLOW  
10  
11  
REV  
PREV  
NEXT  
ENTER  
FWD  
27  
28  
12  
13  
MUTE  
STOP  
DISPLAY  
SLOW  
VOL+  
VOL-  
14  
15  
29  
30  
31  
+
VOL  
16  
17  
0-9 NUMBER KEY  
REPEAT  
NEXT  
PREV  
PLAY  
1
4
7
2
5
8
3
32  
33  
34  
6
9
A-B  
0
GOTO  
A-B  
RESOLUTION  
RETURN  
18  
19  
RETURN  
REPEAT  
32  
33  
MUTE  
PAUSE  
STOP  
34  
RESOLUTION  
GOTO  
Battery installation  
1.Open the cover  
2.Install batteries  
3.Close the cover  
Notes:  
Using the remote  
Point the remote control directly at the  
player's remote sensor.  
Point the remote control at the remote sensor.  
(The picture below is for reference only.)  
Do not leave the remote control in an  
extremely hot or humid place.  
Do not spill water or put anything wet on  
the remote control.  
STANDBY  
ANGLE  
OPEN/CLOSE  
SUBTITLE  
AUDIO  
POP MENU/TITLE MENU  
RANDOM  
Inserting the 2AAA 1.5V batteries making  
sure the polarity (+ or -) of the batteries  
matches the polarity marks inside the unit.  
BONUS  
VIEW  
SECONDARY  
AUDIO  
SECONDARY  
SUBTITLE  
ENTER  
SETUP  
DISPLAY  
STEP  
FWD  
SLOW  
REV  
PREV  
NEXT  
MUTE  
STOP  
+
VOL  
1
4
7
0
2
3
5
8
6
9
GOTO  
RESOLUTION  
REPEAT  
A-B  
RETURN  
6
Connecting Your Blu-ray Player  
HDMI  
Y
U
V
R
L
VIDEO  
AUDIO IN  
VIDEO IN  
YPbPr IN  
HDMI IN  
CONNECT BD PLAYER TO TV SET BY AV CABLE  
Connect the BD player s L and R jack to the audio input jack on the TV.  
Connect the BD player s video out jack to the video input jack of TV.  
CONNECT THE BD PLAYER TO TV SET USING THE Y/Pb/Pr JACKS  
Use the COMPONENT Cable(not supplied) to connect BD player to your TV.  
Set the [Primary output] to [Component].  
Connect the BD player s L and R jack to the audio input jack on the TV.  
Notes: The BD player component output supports 1080i, 720P, 576P and 576i.  
You can press RESOLUTION key on the remote controller to set the BD player  
component output. If your TV does not accept your resolution setting, an  
abnormal picture appears on the screen. Please read TV s owner s manual then  
set the resolution that your TV can accept.  
CONNECT THE BD PLAYER TO TV SET USING THE HDMI OUTPUT  
Use an HDMI cable to connect BD player to your TV (please check outer packaging  
to see if an HDMI Cable is included with this product, if not please visit your local  
retailer to purchase an HDMI cable for optimal Blu-ray playback performance).  
Notes: The player supports video resolution up to 1080p 60Hz on HDMI output. If  
the player is set to a resolution the TV cannot support, picture will become abnormal.  
Press the RESOLUTION button under STOP status to change the output resolution.  
The player can also perform auto detection of supported TV resolution via EDID in  
order to avoid the setting of unsupported resolution.  
7
Connecting Your Blu-ray Player  
Connecting to an AV Amplifier with Digital Audio Input  
or  
Coaxial  
Optical  
Digital Amplifier  
Notes:  
1. Select the Coaxial or Optical digital audio output.  
2. Set the digital Amplifier to the AV input connected to the BD player.  
8
Remote Control Button Definitions  
Advanced Features  
,
Function Buttons  
OPEN/CLOSE  
To open the disc tray, press OPEN/CLOSE; To close the disc tray, press OPEN/CLOSE  
again.  
AUDIO  
During BD, DVD playback, press AUDIO can select different audio language.  
During VCD playback, press AUDIO button to switch between LEFT/RIGHT/STEREO  
channels.  
SUBTITLE  
Press the button to choose different captions(Requires support from disc).  
RANDOM  
During CD playback, press RANDOM button for random sequence playing.  
MENU  
During BD, DVD playback, press MENU to display the disc menu of the current title.  
Note: This function is subject to the disc.  
During VCD playback, press MENU to control PBC ON/OFF.  
COLOUR( RED/GREEN/YELLOW/BLUE)  
Use the buttons as indicated by the video display during BD-ROM disc playback.  
DISPLAY  
Press the button to show the information of the current playing disc.  
A-B  
During playback, press A-B to select point A, press it again to select point B. The player will  
repeat the section from A to B automatically. Press A-B a third time to cancel A-B repeat and  
clear points A and B.  
Note: During CD/VCD playback, points A and B must be within the same track. During BD,  
DVD playback, points A and B can be selected from different chapters.  
ENTER  
Press the button to confirm your choice on screen.  
RETURN  
When VCD disk playing, press RETURN button to return to Main menu (PBC ON only).  
During BD/DVD playback, it acts like RESUME  
SLOW  
During BD, DVD, VCD or SVCD playback, press SLOW for slow motion playback. One you  
press SLOW, the disc will play at different speed. Press PLAY to resume normal playback.  
9
Advanced Features  
Remote Control Button Definitions  
NEXT  
During BD, DVD,CD or VCD playback, press NEXT to play the next chapter, title or track.  
PREV  
During BD, DVD, CD or VCD playback, press PREV to play the previous chapter, title or  
track.  
Play  
In pause state or stop state, press the button, the player will be in playing state.  
MUTE  
Press MUTE to turn off the audio, press MUTE again to resume normal sound.  
Pause  
In play state, press the button for the first time and the player will be in pause state.  
STOP  
Press the button once and the player will be in memory stop state. Continuously press  
this button twice and the player will be in complete stop state.  
RESOLUTION  
In the STOP/OPEN TRAY/NO DISC state, Press RESOLUTION key, you can select  
different output resolution for HDMI and component.  
GOTO  
During BD/DVD playback, press GOTO button to choose the desired title or chapter, and  
search the desired title time or chapter time.  
During VCD playback, press GOTO button to search the desired disk time or track time,  
and choose the desired track.(only valid on PBC off)  
During CD playback, press GOTO button to search desired track  
STANDBY  
Press the button to switch the power between normal work mode and standby mode.  
ANGLE  
Press ANGLE button to view the scene from different angles, this function is disc  
dependent.  
Bonus View  
Press Bonus View button to play the secondary video.  
(Picture in picture mode, this function is disc dependent).  
Secondary Subtitle  
Press Secondary Subtitle button to choose subtitle language of the secondary video (this  
function is disc dependent).  
Secondary Audio  
Press Secondary Audio button to choose audio language for the secondary audio (this  
function is disc dependent).  
10  
Remote Control Button Definitions  
Advanced Features  
POP MENU/TITLE  
Press the button to enter the appointed title.(Requires disc support)  
During BD playback, press the button to display the disc s popup menu.  
REPEAT  
Each press of the REPEAT button will change the repeat mode.  
During VCD, CD playback, there are three modes: repeat Single, repeat ALL and Off.  
During BD, DVD playback, there are three modes: Repeat Chapter, Repeat Title and OFF.  
Note: During VCD playback, the PBC mode must be set to Off.  
Direction key(UP/DOWN/RIGHT/LEFT)  
Press the keys to move the highlighted bar or cursor on any menu to your selection.  
SETUP  
Press the button to enter the system setting menu. Press the button again to exit the menu.  
STEP  
Press STEP to step a single frame/ picture forward during playback. Press STEP several  
times to step several frames/ pictures forward. Press play to resume playback.  
REV:  
During BD, DVD, CD or VCD playback, press REV to scan in reverse. The player will review  
the disc at different times speed. Press PLAY/PAUSE to resume normal playback.  
FWD  
During BD, DVD, CD, or VCD playback, press  
to scan forward. The player will cue the  
FWD  
disc at different speed. Press PLAY/PAUSE to resume normal playback.  
VOLUME+/-  
Press VOL+ to increase volume and press VOL- to decrease volume.  
0-9 keys  
These keys are used to input the time, as well as title, chapter and track numbers. When a  
numeric item is displayed on the screen, press the 0-9 keys to select the desired entry, and  
press ENTER to confirm. When a VCD is playing(with PBC off), press the 0-9 keys to select  
a track directly.  
11  
Blu-ray Player Settings and Customizations  
Advanced Features  
BD Player Setup Menu  
Press SETUP button on remote controller under STOP or TRAY OPEN status to enter Main  
menu. In Main menu, press UP/DOWN button to select desired sub-menus and press  
ENTER button to switch to other sub-menus. In sub-menus, LEFT/RIGHT button are used  
to change options for desired item which was highlighted.  
A. Main setup menu for 2 channel player  
Language Menu  
Display Menu  
Audio Menu  
Parental Password Menu  
Diagnostic Menu  
EXIT  
ENTER: switch menu item  
: make choice  
B. Main setup menu for multi-channel player  
Language Menu  
Display Menu  
Audio Menu  
Parental Password Menu  
Speaker Menu  
Diagnostic Menu  
EXIT  
ENTER: switch menu item  
: make choice  
1. LANGUAGE SETUP  
Select Language in the setup menu, and display the Language submenu:  
Language Menu  
Audio Language  
Subtitle Language  
Menu Language  
OSD Language  
BACK  
Auto  
None  
Auto  
English  
To Index Menu  
ENTER: switch menu item  
: make choice  
1.1 Audio Language : Select default audio language for BD/DVD  
1.2 Subtitle Language: Select default subtitle for BD/DVD.  
12  
Blu-ray Player Settings and Customizations  
Advanced Features  
1.3 Menu Language: Select default menu language for BD/DVD.  
1.4 OSD Language: Select your language for player OSD.  
1.5 BACK: Return to main setup menu.  
2. DISPLAY SETUP  
Select Video in the setup menu, and display the Video submenu:  
Display  
Menu  
TV Type  
NTSC  
16:9  
TV Aspect  
Resolution  
Color Space  
Film Mode  
BACK  
1080i  
xvYCC  
off  
To Index Menu  
ENTER: switch menu item  
: make choice  
2.1 TV Type: Select TV type.  
2.2 TV Aspect:: Select display configuration for disc.  
16:9: Content presented in 16:9 geometry for widescreen TVs.  
4:3: Content presented in 4:3 geometry with horizontal black bars on top and bottom for  
conventional TVs.  
4:3 Pan and Scan: Content cropped to fit within 4:3 geometry for conventional Tvs.  
Note: Under HD(720P / 1080i / 1080P) mode, just 16:9 is available.  
2.3 Resolution: Select desired resolution.  
2.4 Color Space  
User can select the best color space the TV supported for best color effect  
xvYCC: player implements a fallback algorithm in which the flow is xvYCC->YCC->RGB  
base on EDID information via HDMI  
YCC: player implements a fallback algorithm in which the flow is YCC->RGB base on EDID  
information via HDMI  
RGB: player will output video using RGB color space  
Note: Color space setting only affects HDMI video output. Choose correct option here if you  
know the color space feature of TV, choose xvYCC option to let player decide for you. For  
some special case, e.g. the TV has wrong EDID information, please change color space to  
RGB.  
2.5 Film Mode  
On: player will output disk content recorded at 24 frames per second directly  
Off: player will convert 24frams/sec content to 1080p 60Hz output  
Note: This item is only affect HDMI output, if no HDMI connect to player or TV do not support  
1080p24Hz, it will be locked to ・Off・ option.  
2.6 BACK: Return to main setup menu.  
13  
Blu-ray Player Settings and Customizations  
Advanced Features  
3. Audio setup menu  
A. For 2 channel player  
Audio Menu  
Digital Output  
PCM  
PCM Downsampling  
Dynamic Range Control  
BACK  
Off  
Off  
To Index Menu  
ENTER: switch menu item  
: make choice  
B. For multi-channel player  
Audio Menu  
Digital Output  
PCM  
PCM Downsampling  
Dynamic Range Control  
Bass Crossover Freq  
BACK  
Off  
Off  
Off  
To Index Menu  
ENTER: switch menu item  
: make choice  
3.1Digital Output  
Choose preferred option for digital output base on receiver connected to player  
PCM: Output PCM audio data for receiver not support Dolby「 and DTS「 decoding (mixed  
primary audio, secondary audio and effect audio if available in disk)  
Bitstream: Output raw data for receiver support Dolby and DTS decoding (primary audio  
only).  
Re-encoded DTS: Output DTS data format for receiver if it support DTS decoding (mixed p  
rimary audio, secondary audio and effect audio if available in disk)  
Note: Not setting this item properly may result in noise.  
「 Dolby Digital, Dolby Digital Plus, Dolby Digital True HD  
「 DTS and DTS HD  
14  
Blu-ray Player Settings and Customizations  
Advanced Features  
3.2 PCM Downsampling: Sets maximum sampling rate for the SPDIF digital audio output (as  
some SPDIF receivers do not support 192 kHz or even 96 kHz).  
48 kHz: Downsample audio with sample rates over 48 kHz.  
96 kHz: Downsample audio with sample rates over 96 kHz.  
Off : No downsampling on SPDIF output.  
3.3 Dynamic Range Control: Reduces loudness difference between soft and loud parts of  
the audio track.  
On: Enables dynamic range control for all codecs.  
Follow: Enables dynamic range control for all codecs. MLP streams use the  
DRC level embedded in the audio stream itself.  
Off: Turns off dynamic range control.  
3.4 Bass Crossover Freq(only for multi-channel player)  
Use this item to indicate BD player your Subwoofer's frequency response (off / 80Hz /  
100Hz / 120Hz)  
3.5 BACK: Return to main setup menu.  
4. Parental control menu:  
Please Input 4-Digit parental password  
ENTER: switch menu item  
: make choice  
Enter right password to enter parental control menu.  
Parental Menu  
Parental Country  
Parental Control  
Parental Level  
Parental Password  
BACK  
USA  
Off  
1.Kid Safe  
Default  
To Index Menu  
ENTER: switch menu item  
: make choice  
Note: Factory default password is 6666.  
15  
Blu-ray Player Settings and Customizations  
Advanced Features  
4.1 Parental Country: Select the movie intended for your residential area.  
USA: Parental country set to USA.  
International: Parental country set to others  
4.2 Parental Control: Activate parental control.  
Off: Turn off parental control.  
On: Turn on parental control.  
4.3 Parental Level Select parental control level, disc cannot be played if preset level on  
disc exceeds the level user set.  
1.Kid Safe  
2.G  
3.PG  
4.PG-13  
5.PG-R  
6.R  
7.NC-17  
8.Adult  
4.4 Parental Password: Set parental password.  
Default: Reset to default password  
User Define: Setup user define password  
User defined password setting for parental control.  
Please set 4-Digit Parental password: ----  
ENTER: switch menu item  
: make choice  
4.5 BACK  
Select this item, then press ENTER to return to main setup menu.  
5.Speaker Menu(only for multi-channel player)  
Set this menu properly for analog audio output.  
If there are only 2 speakers, just keep Front L-R as ・large・, set others to ・Off・  
If there are more speakers connected through amplifier, Front L-R set to ・Large・,  
others you can set to ・Large・ or ・Small・, and turn Subwoofer to ・On・. Only when the  
source content with 5.1CH or 7.1CH audio stream, player can output 5.1CH or 7.1  
CH analog audio  
16  
Advanced Features  
Blu-ray Player Settings and Customizations  
Speaker Menu  
Front L-R  
Center  
Large  
Large  
Surround L-R  
Rear L-R  
Subwoofer  
BACK  
Large  
Large  
On  
To Index Menu  
ENTER: switch menu item  
: make choice  
6. Diagnostic Menu  
Reload Default Setting? (Okay/Canel)  
Erase nonvolatile storage  
OKAY  
OKAY  
ENTER: switch menu item  
: make choice  
Use UP/DOWN to select item, then use the LEFT/RIGHT key to change option (OK or Cancel).  
Reload Default Setting? (Ok/Canel)  
Loading factory default setting for all items in setup menu  
Erase nonvolatile storage  
Erase storage partition function base on BD-J requirement  
7.File Disk Playback ----- WMA/MP3/JPEG(WMJ) files on disk  
After reading from your recorded music/picture/video disk, the player will list all  
directories and files in root directory as shown below. Press the TITLE key to display  
the help messages, Press the MENU key to bring up the pop up menu which guide  
you through the special features, press the LEFT button to exit the pop up menu,  
press NAVIGATION buttons on remote control to select desired item for playback  
or enter the next level directory.  
17  
Blu-ray Player Settings and Customizations  
Advanced Features  
For music files, in the pop up menu, user can add the current file into playlist as  
a favorite songs, and set current file as the background music for your JPEG slide show.  
Play  
Add Play List  
Set As BGM  
For the playlist operation, in the pop up menu, user can set the play mode, audio mode,  
and remove songs which have been added into playlist.  
Play  
Set Play Mode  
Set Audio Mode  
Play list  
For JPEG files, in the pop up menu, the user can choose to play the current JPEG or  
slide show JPEG files  
Play  
Start Slide Show  
Properties  
For a single JPEG file playback, a user can change to slide show mode with different  
transition effects, rotate the current picture or choose Propertiesto see detailed  
file information.  
Start Slide Show  
Rotate  
Properties  
For JPEG slide show operations, the user can set the time interval or transition effects for  
the JPEG slide show and enable background music playback during a JPEG slide show.  
Start Slide Show  
Slide Show Duration  
Slide Show BGM  
Blend  
Film  
Shutter  
Fade  
Curtain  
None  
18  
Troubleshooting  
& Specifications  
Troubleshooting  
Make sure the Main unit s POWER button is on.  
Ensure you have entered the correct AV input for your TV.  
Ensure you have entered the correct AV input for your TV.  
19  
Troubleshooting  
& Specifications  
Specifications  
Power requirements: AC 100-240 Volt, 50/60Hz  
Power consumption: 35W  
Discs COMPATIBILITY:  
BD,DVD,DVD+/-R/RW,VCD,CD-DA,CD-R/RW.  
Video out  
Video out: 1.0V(p-p)/75 , sync, negative polarity, RCA pin jack x 1  
Audio out  
2 channel out: RCA pin jackx2  
7.1 channel out: RCA pin jackX8 (optional)  
Coaxial out: 0.5V(p-p)75 , RCA pin Jack x l  
Frequency response: 20Hz to 20kHz  
S/N ratio:>90dB  
Total harmonic distortion: <-65dB  
[Accessories]  
Video/ Audio cable x 1 (or HDMI cable, please refer to the outer packaging)  
Remote Control x 1  
User s Manual x 1  
Battery x 2  
Specifications are subject to change without notice.  
Weight and dimensions are approximate.  
20  

Alpine CDE 124SXM User Manual
Black Decker FP1000 User Manual
Freecom Technologies WSXGA 220AW8FB User Manual
Hitachi HV D25 User Manual
Ikelite Canon 6090 User Manual
JBL CS3 User Manual
JVC Car Speaker KD R330 User Manual
JVC Everio Digital Camcorder GZVX815BUS User Manual
JVC Everio GZ HM30U User Manual
JVC GR AXM18EG User Manual