Cuisinart CSB 55 User Manual

®
INST RUCT ION  
BOOKLET  
SMART ST ICKEXT ENDIBLE SHAFT HAND BLENDER  
CSB-55  
Cuisinart Repair Center for examination, repair, mechanical or electrical  
adjustment.  
TABLE OF CONT ENT S:  
Important Safeguards..................................................................................pg. 2  
Introduction.................................................................................................pg. 3  
Features and Benefits ..................................................................................pg. 4  
Before You Begin.........................................................................................pg. 6  
Hand Blender Assembly..............................................................................pg. 6  
Shaft Length Adjustment............................................................................pg. 7  
Hand Blender Operation ............................................................................pg. 8  
Helpful Hints...............................................................................................pg. 9  
Attachments.................................................................................................pg.10  
Storage Stand for Countertop Use.............................................................pg.11  
Storage Stand for Wall Mount ...................................................................pg.12  
Chopper Grinder Parts and Assembly........................................................pg.13  
Chopper Grinder Tips for Processing Food..............................................pg.16  
Processing Foods.........................................................................................pg.18  
Cleaning.......................................................................................................pg.20  
SmartStick™ Hand Blender ....................................................................pg.20  
SmartStick™ Mini Prep® Chopper Grinder Attachment ......................pg.20  
Recipe Suggestions......................................................................................pg.21  
Warranty......................................................................................................pg.27  
Template for Wall Mount Storage..............................................................pg.28  
8. Remove detachable shaft from the blender before washing the blades  
or shaft.  
9. Blades are SHARP. Handle carefully when removing, inserting  
or cleaning.  
10. When mixing liquids, especially hot liquids, use a tall container or make  
small quantities at a time to reduce spillage, splattering and possibility of  
injury from burning.  
11. To reduce the risk of injury, never place chopper grinder attachment cut-  
ting blade on base without first putting prep bowl properly in place.  
12. Be certain the chopper grinder attachment cover is securely locked in  
place before operating appliance. Do not attempt to remove cover until  
blade has stopped rotating.  
13. Check prep bowl for presence of foreign objects before using.  
14. The use of attachments or accessories not recommended by Cuisinart  
may cause fire, electrical shock, or risk of injury.  
15. Do not use outdoors.  
16. Do not let any cord hang over the edge of the table or counter. Do not  
let cord contact hot surfaces, including stovetop.  
IMPORTANT SAFEGUARDS  
17. Make sure the appliance is “off”, the motor has stopped completely, and  
the appliance is unplugged from outlet before putting on or taking off  
attachments, and before cleaning.  
When using an electrical appliance, basic safety precautions should always be  
followed including the following:  
1. READ ALL INST RUCT IONS.  
18. To reduce the risk of fire or electric shock, do not operate any heating  
appliance beneath the mounting unit.  
2. To protect against electrical shock, do not put the motor body, cord or  
electrical plug of this Hand Blender in water or other liquid. The drive  
shaft of this appliance, where blades are interchanged, has been designed  
for submersion in water or other liquids. Never submerge any other  
portion of this unit. If Hand Blender falls into liquid, remove immediately.  
Do not reach into the liquid without unplugging the unit first.  
19. Do not mount the storage bracket/ unit over or near any portion of a  
heating or cooking appliance or a sink or basin.  
SAVE T H ESE INST RUCT IONS  
FOR H OUSEH OLD USE ONLY  
NOT ICE  
This appliance has a polarized plug (one blade is wider than the other). As a  
safety feature, this plug will fit in a polarized outlet only one way. If the plug  
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact  
a qualified electrician. Do not attempt to defeat this safety feature.  
3. This appliance should not be used by children. To avoid possible acciden-  
tal injury, close supervision is necessary when any appliance is used by or  
near children.  
4. Unplug from outlet when not in use, before putting on or taking  
off parts, and before cleaning. To unplug, grasp plug and pull from  
electrical outlet. Never pull cord.  
5. Avoid contacting moving parts.  
6. During operation keep hands, hair, clothing, as well as spatulas and other  
utensils away from attachments and any mixing container to reduce risk  
of injury to persons, and/or damage to the appliance. A spatula may be  
used, but must be used only when the unit is not operating.  
INT RODUCT ION  
Get to the bottom of Great Cooking!  
The SmartStick™ Extendable Shaft adjusts to your needs. With the  
SmartStick™ Extendable Shaft Hand Blender you can comfortably blend  
long, tall pots of hot soup and great sauces without getting your hands messy  
or your sleeves stained. And, since the handle is above the rim you won’t be  
straining to reach the bottom of that steaming pot.  
7. Do not operate any appliance with a damaged cord or plug or after the  
appliance has malfunctioned or has been dropped or damaged in any way  
or is not operating properly. Return the appliance to the nearest  
2
3
1. Two Stages Snap Together Easily:  
Not only is the SmartStick™ Hand Blender a great kitchen tool for hot  
foods, its great for stirring and freshening entire pitchers of cold drinks like  
icy lemonade, refreshing iced tea, pulpy orange juice, tomato juice or fruit  
smoothies. Milk Shakes too!  
Disassemble for compact storage separately or together in storage stand.  
a. Motor Body with Control Handle:  
Contains powerful AC motor. Variable 4-speed control and one step  
ON/OFF button located on top of handle.  
The Extendable Shaft easily adjusts up to two inches! Simply rotate the  
adjustment ring on the shaft, pull the shaft to the length you want, and then  
tighten the ring.  
b. Detachable Shaft with Adjustable Shaft Length:  
Easy to use, easy to clean and easy to store. Detach from motor body by pressing  
release button. Rinse under faucet or put in top shelf of dishwasher to clean.  
Adjust shaft length with adjustment ring.  
Inspired by great chefs and their restaurant tools, we bring to your home a true  
innovation in Hand Blenders. Armed with a powerful motor and heavy-duty  
blade, the SmartStick™ Hand Blender lets you whip potatoes, blend diet drinks  
and milk shakes, chop cooked vegetables, and purée fruits. Add the whipping  
disc, and you can make whipped cream, mayonnaise, egg whites and milk  
drinks too.  
2. One Step ON/OFF (Power) Button:  
Press and hold the rubberized power button to operate blender. Release button to  
stop motor.  
3. 4-Speed Slide Control:  
Located on top of handle, lever easily slides from left to right to increase speed.  
4. Extendable Blending Shaft (patent pending):  
Shaft extends an extra 2 inches. Easily reaches the bottom of tall pot or  
pitcher while keeping your hands clean and safe.  
The natural grip lets you hold this Hand Blender much like a stirring utensil, so  
its comfortable and natural. The rubber grip gives you a great hold if your hands  
are wet, and four distinct speeds give you precise control. With the ON/OFF  
button on the top you can control the SmartStick™ Hand Blender with your  
thumb. And, the cord is designed to get out of your way while you cook.  
5. Shaft Length Adjustment Ring:  
Adjust shaft length by turning this ring to the left (counterclockwise), then  
pulling shaft to the desired length. Always tighten ring before use by turning  
to the right (clockwise).  
®
By adding the SmartStick™ Mini Prep Chopper Grinder Attachment you  
6. Maximum Comfort Handle:  
can prepare an entire meal.  
The Hand Blender handle and power button are designed around the way you  
actually hold a stirring utensil. The shape of this handle gives you comfortable  
control and easy access to the power button. Rubberized handle gives better  
grip, especially when your hands are wet.  
Cuisinart, the company that invented food processors, brings many years of  
expertise to this chopper grinder attachment. Simply remove the detachable  
shaft from the SmartStick™ Hand Blender, using the convenient release but-  
®
ton. Then attach the SmartStick™ Mini Prep Chopper Grinder Attachment.  
7. Detachable Blending Blade:  
Blade can be detached from shaft to replace with the whipping disc, or for  
cleaning. Blade can also be cleaned without detaching.  
You’re ready to go.  
8. Detachable Whipping Disc:  
Detach blade and replace with this disc for whipping cream and creating other  
delectables.  
FEAT URES AND BENEFIT S  
MODEL CSB-55  
11  
9. Easy-To-Clean:  
3
13  
The Smartstick™ Extendable Shaft Hand Blender has a smooth surface that  
wipes clean instantly and easily. Detachable shaft is dishwasher safe.  
2
3
2
2
3
4
1
1a  
6
10. Mixing Beaker, dishwasher & microwave safe:  
See-thru Mixing Beaker is marked in liters and cups for convenient measuring.  
Use for drinks, shakes, salad dressings, etc. Designed for easy gripping and  
drip-free pouring.  
®
®
TM  
SmartStick  
TM  
SmartStick  
EXTENDABLE  
SHAFT  
EXTENDABLE  
SHAFT  
PRESS BUTTON TO DETACH  
12  
PRESS BUTTON TO DETACH  
®
Use only this piece for wall mounting.  
Connect to other half for countertop storage.  
Motor  
Body  
®
®
®
TM  
SmartStick  
SmartStick  
SmartStick  
MINI PREP®  
MINI PREP®  
Chopper Grinder Attachment  
Chopper Grinder Attachment  
11. Convenient Storage:  
EXTENDABLE  
SHAFT  
Shaft  
Storage stand is made of two pieces. One side holds the detachable shaft. The  
other holds the motor body with control handle. The 2 storage pieces snap  
together for compact countertop storage. To hang the Hand Blender from the  
wall bracket, detach and mount one to the wall and hang the entire appliance as  
shown. Use anchor and screws included with this appliance.  
Release  
Button  
PRESS BUTTON TO DETACH  
4
T
R
I
T
O
L
C
5
1b  
8
®
12. SmartStick™ Mini Prep Chopper Grinder Attachment:  
T
R
I
T
O
L
10  
OZ  
16  
CUPS  
2
2
500ml  
450  
3
Chop, mince & grind with the Cuisinart Chopper Grinder attachment.  
Attaches to blender motor body in place of the blender shaft.  
1
4
1
/
4
12/3  
12 11/2  
10 11/4  
400  
350  
7
11/3  
8
1
1
300  
250  
3
6
/4  
2
/3  
®
4
11/2  
200  
1
/3  
TM  
SmartStick  
1
/4  
2
150  
100  
50  
EXTENDABLE  
SHAFT  
13. Reversible Chopper Grinder Blade:  
Choose best direction depending on task. One direction is sharp. The other  
direction is blunt.  
PRESS BUTTON TO DETACH  
®
DISHWASHER AND MICROWAVE SAFE  
11  
®
Connect to other half for countertop storage.  
4
5
BEFORE YOU BEGIN  
SH AFT LENGT H ADJUST MENT  
Place the package containing the Cuisinart SmartStick™ Extendable Shaft  
Hand Blender on a sturdy surface. Unpack the SmartStick™ from its box by  
removing the upper protective insert. Gently slide the unit from the box.  
Remove all support materials from the box and replace the upper insert. Save  
packaging for possible repacking of the unit.  
Your SmartStick™ Extendable Shaft Hand Blender has a shaft that extends up  
to 2 additional inches. This feature was developed with two major benefits in  
mind. One benefit is that you can mix and blend in tall pots, pitchers, glasses  
or other mixing containers. This makes the SmartStick™ Hand Blender  
more useful than other Hand Blenders.  
Note: T he blending blade is extremely sharp. Use caution when  
removing and unpacking the storage stand. T he blending blade is  
stored in the storage stand.  
The second goal is comfort. You may find that using this appliance is more  
comfortable to hold with the shaft extended, even if you do not require the  
longer shaft for blending.  
®
Before using the Cuisinart SmartStick™ Extendable Shaft Hand Blender for  
T
R
I
T
O
L
the first time, we recommend that you wipe the unit with a clean, damp cloth  
to remove any dirt or dust. Dry it thoroughly with a soft absorbent cloth.  
Handle carefully; wash each individual blade attachment, mixing container  
and detachable shaft by hand or in the dishwasher. Dry thoroughly before  
use. Read all instructions completely for detailed operating procedures.  
T
R
I
T
O
L
H AND BLENDER ASSEMBLY  
Note: To avoid possibility of personal injury always be sure to unplug  
the power cord from electrical wall socket before attaching or removing  
blades and/or attachments.  
A. Attach blade or whipping disc to blender shaft.  
For your safety, always detach the shaft from motor body.  
To insert the blade or whipping disc, hold the stem of the blade/disc  
between your fingers. Match the raised notches on the shaft to the open  
slots on the stem.  
Making the Shaft Longer.  
It will be easier to adjust the shaft length when it is attached to the Hand  
Blender. Follow these steps to adjust:  
Once properly aligned, slide the blade/disc onto the stem and push  
firmly into position. To ensure that the blade/disc is securely in place,  
carefully press the center end of each attachment back toward the shaft.  
1. Hold the SmartStick™ Hand Blender firmly with both hands.  
Hold the main body securely in one hand.  
2. With the other hand rotate the Shaft Adjustment Ring to the left  
(counterclockwise) to loosen the shaft. This will be about a one quarter  
turn. Do not overturn.  
It is important to properly secure the blade/disc to prevent separation  
during use. Do not begin operating Cuisinart SmartStick™ Hand  
Blender until the desired blade/disc is secured!  
3. Extend the shaft to the desired length by pulling on the lower end of the  
shaft. The shaft can be adjusted up to 2 inches. When you have reached  
the maximum possible length of the shaft, you will feel resistance. Do not  
pull any further.  
A
B. Attach detachable  
blender shaft to  
motor control body.  
TM  
4. When you have located the most desirable length, rotate the Shaft  
Adjustment Ring to the right (clockwise) to tighten the shaft. Do not over-  
tighten as you may damage the threads on the shaft.  
SmartStick  
Align blender shaft with the  
EXTENDABLE  
SHAFT  
motor body as shown in  
PRESS BUTTON TO DETACH  
illustration. Slide the pieces  
together till you hear and  
5. You are ready to use the SmartStick™ Hand Blender with shaft extended.  
I
L
feel the pieces click together.  
It may be helpful to  
Note: After blending, rinse the shaft including the extended segment.  
press the release button  
when assembling.  
B
6
7
Tips:  
3. Adjust Shaft Length.  
Only adjust if longer shaft length is needed for tall pots or pitchers.  
1. Immediately after blending, rinse the entire shaft before mixtures dry. This  
See Shaft Length Adjustment, page 7.  
will make the unit easier to clean.  
4. ON  
OFF  
2. Clean by running under faucet, or putting in top shelf of dishwasher.  
2. Speed Adjustment Lever  
Making the Shaft Shorter.  
1. Rotate the Shaft Adjustment Ring to the left (counterclockwise) to loosen  
the shaft. This will be about a one quarter turn. Do not overturn.  
2 3  
4
1
2. Retract the shaft to the desired length by pushing on the lower end of the  
shaft. Do not grab the blender blade.  
3. When the shaft is totally retracted, rotate the Shaft Adjustment Ring to  
the right to tighten the shaft. Do not over tighten or you may damage the  
threads on the shaft.  
Press for ON  
Release for OFF  
®
®
TM  
TM  
SmartStick  
SmartStick  
EXTENDABLE  
SHAFT  
EXTENDABLE  
SHAFT  
Rotate to left  
to loosen  
Rotate to right  
to tighten  
PRESS BUTTON TO DETACH  
PRESS BUTTON TO DETACH  
4. Press and hold ON/OFF switch to turn appliance ON.  
The SmartStick™ Hand Blender will continue to run as long as the  
switch is pressed in. To turn Hand Blender off, release ON/OFF switch  
and the motor will stop.  
T
R
I
T
R
I
T
O
L
T
O
L
®
TM  
SmartStick  
EXTENDABLE  
SHAFT  
®
5. Unplug immediately after use.  
T
R
I
TM  
T
O
L
SmartStick  
PRESS BUTTON TO DETACH  
EXTENDABLE  
SHAFT  
T
RI  
TO  
L
PRESS BUTTON TO DETACH  
H elpful H ints.  
pull  
T
R
I
T
O
L
1. Cut most solid foods into 1/2" cubes for easy blending. Suggestion: use  
Chopper Grinder for chopping and grinding solid foods.  
Shaft Length  
Adjustment  
Ring  
2. Pour liquid ingredients into the mixing container first unless recipe  
instructs otherwise.  
3. To avoid splashing, do not pull the Hand Blender out of the mixture while  
it is running.  
Grasp here  
and pull  
to extend  
4. Do not let Hand Blender stand in a hot pot on stove while not in use.  
5. To prevent splashing, don’t turn the Hand Blender on until the blade is  
beneath the surface of the mixture.  
H AND BLENDER OPERAT ION  
6. Do not put fruit pits, bones, or other hard material into the blending  
mixture as these are liable to damage the blades.  
Turning SmartStickExtendable Shaft Hand Blender ON/OFF:  
Keep hands, hair, clothing, and other utensils away from blending blade.  
1. Plug electrical cord into an electrical wall socket.  
7. Do not fill mixing containers too full. The level of mixture will rise when  
blending and can overflow.  
If a wall switch controls current to the socket, be sure the switch is ON.  
8. Adding liquids that are warm, not cold, facilitates blending solids with  
liquids.  
2. Adjust Speed Setting.  
Rotate the Speed Setting Lever clockwise to increase speed, counter-  
clockwise to decrease speed. Speeds increase from left to right with  
Speed 1 being the slowest, and Speed 4 the fastest.  
9. For recipes calling for ice, use crushed ice (not whole cubes) for best  
results.  
8
9
Use Speeds 1 and 2 for whipping with the whipping disc.  
AT TACH MENT S:  
(A) BLENDING / MIXING / CH OPPING / MINCING BLADE  
The Whipping attachment is specially designed to add air and volume to  
mixtures. Perfect for aerating egg whites and cream, this attachment adds  
air that makes mixtures light, frothy and thick.  
When using this attachment, make sure there is extra room in the mixing  
container for the recipe to grow! For most recipes such as mayonnaise,  
beaten egg whites and whipped cream, hold the end of the SmartStick™  
Hand Blender in the bottom of the container and turn it on for about  
15 seconds. Then continue to process, gently lifting the Hand Blender  
almost to the top of the liquid until the mixture is thick.  
Always use Speeds 3 and 4 when blending, mixing, chopping and puréeing  
with the metal blade.  
Blending & Mixing.  
The specially designed blade is for mixing and stirring all kinds of foods,  
including salad dressings, powdered drink products, and sauces. It is ideal for  
combining dry ingredients, and can be used to emulsify mayonnaise too.  
ST ORAGE STAND / WALL BRACKET S  
The SmartStick™ Extendable Shaft Hand Blender includes a two part  
storage stand that can be assembled into a single piece for countertop use.  
You can also separate the stand into two pieces, and mount one of the pieces  
on your wall to use as a wall storage bracket.  
This blade mixes and stirs while adding only a minimum of air to your mixture.  
A gentle up-and-down motion is all you need to make the most flavorful, full-  
®
bodied liquid recipes. Be careful never to remove the Cuisinart SmartStick™  
Storage stand kit consists of six (6) pieces: two anchor bolts, two plastic wall  
anchors, and two storage pieces that can fit together for countertop use or  
separate for wall mount.  
Extendable Shaft Hand Blender from the liquid while in operation.  
Chopping & Mixing.  
This blade also chops and purées cooked fruits, vegetables, baby foods, and  
cooked meats/poultry. To chop or mince, always cut food into uniform pieces  
Countertop Option.  
®
of 1/2" to ensure perfect results. Keep the Cuisinart SmartStick™  
The two storage pieces fit together. (See diagram below).  
Extendable Shaft Hand Blender directly over the food being processed, while  
placing a free hand on the mixing container for support. You may wish to  
place your free hand over the top of the container to prevent chopped ingre-  
dients from escaping. Use a forceful up-and-down motion when chopping  
and blending. This allows the blade to process the food more efficiently.  
1
NOT E: If a piece of food becomes lodged in the guard surrounding the  
blade, follow the safety instructions below:  
3
T
RI  
TO  
L
C
1. Release the power button and unplug the electrical cord from the  
wall socket.  
2
®
TM  
SmartStick  
EXTENDABLE  
SHAFT  
2. After the power source is disconnected, use a spatula to carefully remove  
the food lodged in the guard. Avoid injury. Do not use your fingers to  
remove lodged objects.  
PRESS BUTTON TO DETACH  
®
Connect to other half for countertop storage.  
3. After the lodged food has been removed you may plug the electrical cord  
into the wall socket and continue blending.  
Align the two pieces back to back on a flat surface, with the ring shaped  
reservoirs facing right and left. The raised walls should be in the middle. Lift  
up the right piece, align the two tabs in the back with the two slots of the left  
piece. Gently slide the tabs into the slots until both pieces are resting flat on  
the countertop.  
NOT E: The maximum rating is based on the Blending Blade attachment  
that draw the greatest load (power or current) and that other recommended  
attachments may draw significantly less power or current.  
(B) WH IPPING DISC AT TACH MENT  
To store SmartStick™ Hand Blender, detach the shaft and place the bottom  
part (blade guard) into one of the reservoirs. Place the motor body (right side  
up) into the other reservoir. You should be able to read the SmartStick™  
logo, when the motor body is in the stand.  
10  
11  
Mini Chopper Grinder Storage.  
The counter storage unit can be placed in a cupboard or on a shelf if not on  
the counter.  
®
The SmartStick™ Mini Prep Chopper Grinder Attachment stores neatly on  
the countertop in a minimum of space. Store the unit assembled to prevent loss  
of parts. Store the blades as you would sharp knives—out of reach of children.  
Wall Mount Option  
Separate the two plastic storage stand pieces. You will need only one for wall  
mount. (See diagrams below). The unit you must use is the section that has  
the round storage hole to hold the whipping disk.  
Chopper Grinder Parts and Assembly  
E
A. Chopper Grinder  
F
F
Prep Bowl  
B. Cover Slots (3)  
for Attaching  
Cover  
G
G
N
M
L
C. Metal Blade  
Assembly Shaft  
D. Rubber Feet  
E. Blade Assembly  
F. Blade Ring  
G. Plastic Blade  
Sheath  
K
Wall  
Anchor  
Bolt  
Anchor  
J
When selecting a mounting location, be sure to leave enough room above the  
storage stand for your hand to remove the SmartStick™ Hand Blender. Also be  
sure to leave enough room below the stand to allow the appliance to hang freely.  
E
®
H
SmartStick  
MINI PREP®  
Chopper Grinder Attachment  
H. Chopper Grinder  
Cover  
I
B
A
I. Lift Tabs  
G
J. Chopper Grinder  
Spline  
You will need to drill two holes 2 5/8" apart from each other, measured from  
the center of each hole. To assist in proper location of holes for the mounting  
screws, remove the wall mount template from this instruction book. Place the  
template over the back of the wall unit, aligning the outline of the template  
with the wall bracket. When you have done this, place the template and wall  
bracket against the wall in the desired location. Remove the wall bracket,  
leaving the template in place. Mark the wall with a pencil in the locations for  
screw holes indicated by the template. Remove the template.  
K. Central Hub  
Holding Ribs  
L. Curved Sharp  
Edge  
C
F
M. Flat Blunt Edge  
N. Ridges for  
Gripping  
D
With a drill, make a 3/16" starter hole for each screw. Place the plastic  
anchor in each hole. Push completely into the hole with fingers, or tap in  
gently with a hammer. Screw a mounting screw into each hole leaving 1/8" to  
1/4" of the head and screw exposed.  
®
TM  
SmartStick  
EXTENDABLE  
SHAFT  
PRESS BUTTON TO DETACH  
®
SmartStick  
®
MINI PREP®  
Chopper Grinder Attachment  
SmartStick  
MINI PREP®  
Chopper Grinder Attachment  
Position the two mounting holes of the wall bracket over the screw heads and  
slide wall bracket down the wall until the bracket is resting against the screw  
head, and will not slide any further. If the wall bracket feels too  
loose against the wall, remove bracket, put screws further into  
wall and replace bracket.  
Reversible Blade.  
®
The Cuisinart SmartStick™ Mini Prep Chopper Grinder attachment is  
equipped with a reversible blade. This blade is sharp on one side and blunt  
on the other. The blade is attached to a plastic ring which slides over the  
blade assembly shaft, so it can be easily turned over to select the appropriate  
blade. A guide for proper blade selection follows in the section, Chopper  
Grinder Tips for Processing Foods.  
®
TM  
SmartStick  
EXTENDABLE  
SHAFT  
PRESS BUTTON TO DETACH  
®
Use only this piece for wall mounting.  
Connect to other half for countertop storage.  
Place the assembled SmartStick™ Hand Blender into the wall  
bracket. The unit will hang from the bracket, held in place by  
the motor body width.  
Before you process any food, assemble the parts.  
1. Place the Prep Bowl on a flat, dry, stable surface. It should be close to an  
electrical outlet of the same voltage as stated on the rating plate on the  
SmartStick™ Hand Blender.  
To reduce the risk of fire or electric shock, do not operate any  
heating appliance beneath the mounting unit.  
Do not mount the storage bracket/ unit over or near any portion of a heating  
or cooking appliance or a sink or basin.  
12  
13  
2. The metal blade assembly shaft is attached to the bottom of the Prep  
Bowl. If not already in place, slide the fully assembled Blade Assembly over  
the top of the blade assembly shaft.  
of the Plastic Blade Sheath. Let the Blade Ring slide down to the bot-  
tom of the Plastic Blade Sheath. The lower blade should almost touch  
the bottom of the Prep Bowl.  
Lift the Prep Bowl, holding it firmly from the bottom. Pick up the Blade  
Ring by its hub holding ribs (grips) and turn it very slightly clockwise.  
This locks it in place on the Plastic Blade Sheath and prevents it from  
sliding up during processing.  
2a. Putting together the Blade Assembly:  
Connect the Blade Ring (F) to the Plastic Blade Sheath (G). Line up the  
blade ring opening with the plastic sheath. Let the blade ring slide to the  
bottom of the plastic sheath. HOLD THE BLADE RING BY THE  
CENTRAL HUB HOLDING RIBS (grips)(K) ONLY. DO NOT  
TOUCH THE RAZOR SHARP BLADES.  
3. Connect the SmartStick™ Hand Blender  
Motor Body to the top of the Chopper  
Grinder Attachment Cover. Align the spline  
in the Chopper Grinder Covers drive shaft  
with the ribbed opening on the underside of  
the motor body. When aligned properly, slide  
the two pieces together until they mate. You  
will feel and hear a slight click. It may be  
helpful to press the rubber release button  
when sliding these pieces together.  
3
2a  
F
Motor  
Body Bottom  
and Chopper  
Grinder  
®
K
TM  
SmartStick  
EXTENDABLE  
SHAFT  
N
Cover Top  
View  
PRESS BUTTON TO DETACH  
G
4. With the Hand Blender in place, locate the  
Chopper Grinder cover and place it on top of  
the prep bowl.  
Note these important features of the Blade Ring. The Blade Ring can be  
placed over the Plastic Blade Sheath in two different ways:  
®
SmartStick  
MINI PREP®  
Chopper Grinder Attachment  
If you hold it this way (A), you will see the word “Sharp” on the blade.  
Assemble the blade this side up to use the sharp edge. (see the section on  
processing food for information about when to use the sharp edge.)  
4a. Be sure that the 3 ridges at the top of the  
Blade Assembly line up with the 3-arm  
propeller gear in the underside of the chopper grinder cover, and that  
the cover is seated all around the top of the prep bowl.  
SHARP SIDE  
A.  
4b.To properly seat the cover you must line up the three molded pins from  
the cover with the 3 slots at the top of the Prep Bowl. Rotate cover  
counterclockwise to secure it to the prep bowl. Rotate the cover until  
the pins are in the far left position in the slots.  
If you hold it this way (B), you will see no writing on the blade. Assemble  
the blade this side up to use the blunt edge. (See the section on processing  
food for information about when to use the blunt edge.)  
4
®
TM  
SmartStick  
EXTENDABLE  
SHAFT  
®
4b  
TM  
SmartStick  
B.  
EXTENDABLE  
SHAFT  
PRESS BUTTON TO DETACH  
Inside View  
of Chopper  
PRESS BUTTON TO DETACH  
®
Grinder  
SmartStick  
MINI PREP®  
Cover  
Chopper Grinder Attachment  
®
®
SmartStick  
TM  
MINI PREP®  
SmartStick  
Chopper Grinder Attachment  
BLUNT SIDE UP  
4a  
EXTENDABLE  
SHAFT  
There are notches (C) on opposite sides of the interior of the hub. These  
fit over ridges on the sides of the Plastic Blade Sheath.  
PRESS BUTTON TO DETACH  
Notch  
®
C.  
SmartStick  
MINI PREP®  
Chopper Grinder Attachment  
Pick up the Blade Ring by its hub holding ribs (grips) and line up the  
notches in the interior of the Blade Ring hub with the ridges on the sides  
Inside View  
of Prep Bowl  
14  
15  
Pulse action:  
5. Plug the power cord of the SmartStick™ Hand Blender into an electrical  
outlet.  
Use pulse action to prevent overprocessing. To coarsely chop, two or three  
pulses are often enough. Be sure to check the food frequently to prevent  
overprocessing.  
6. Place one hand on the cover of the Chopper Grinder attachment while grip-  
ping the SmartStick™ Hand Blender motor body handle with the other.  
Select the appropriate speed on the speed control, then press the ON/OFF  
button with your thumb to start the motor and run the chopper grinder. To  
turn the unit off, remove your thumb from the ON/OFF button.  
Continuous-hold action:  
Continuous-hold action is best when you want to finely chop or mince food.  
For some very hard foods, it is best to pulse several times and then run  
continuously to reach the desired consistency.  
7. WH EN T H E BLADE ST OPS MOVING, unplug the SmartStick™  
Hand Blender, remove the motor body from the chopper grinder cover,  
and remove the cover from the Prep Bowl.  
When you operate the unit for more than 10 seconds, use a pulse action  
every 10 seconds or so to allow food to drop to the bottom of the Prep Bowl.  
This provides more consistent results.  
8. Disassembling the Blade Assembly Lift the Plastic Blade Sheath.  
Holding the Blade Ring stationary (using the Central Hub Holding Ribs)  
carefully turn the Plastic Sheath clockwise, then guide the Blade Ring up  
over the Plastic Sheath.  
Never operate the Chopper Grinder continuously for longer than 1  
minute at a time.  
Note: The Prep Bowl may become scratched when you use it for grinding  
coffee, grain and spices. This does not affect the performance of the  
®
CH OPPER GRINDER T IPS for  
PROCESSING FOOD  
Preparing the Food  
SmartStick™ Mini Prep Chopper Grinder.  
Adding Liquid:  
You cannot add liquids such as water, oil or flavoring while the machine is  
running. You will need to stop the Hand Blender, remove the lid, add liquid  
and then replace the lid before continuing to process.  
Size:  
Always cut food into pieces of even size - about 1/4 to 1/2 inch (6-12mm) to  
a side. If you don’t start with pieces that are small and uniform, you will not  
get an even chop.  
Removing Food from the Sides of the Bowl:  
Occasionally food will stick to the sides of the bowl as you process. Stop the  
machine to clear it away. AFT ER T H E BLADE H AS ST OPPED  
MOVING, remove the cover, and use a small spatula to scrape the food  
from the sides of the bowl back into the center.  
Quantity:  
Do not overload the Prep Bowl. Overloading causes inconsistent results  
and it strains the motor. Use the quantities given in the chart on page 19  
as a guide.  
Reversing the Blade in the Middle of a Processing Task:  
While preparing some recipes, you may want to switch the blade from sharp  
to blunt or vice versa.  
Selecting the Right Blade Edge:  
Use the sharp edge for chopping, puréeing and mixing. It is the right choice,  
for example, for chopping soft, fragile food such as herbs, celery, onions,  
garlic, nuts, chocolate and most cheeses. It is also the right choice for  
puréeing cooked vegetables and mixing salad dressing.  
1. Unplug the SmartStick™ Hand Blender.  
2. Remove the Hand Blender Motor Body from the Chopper Grinder  
Attachment.  
3. Remove the cover from the Prep Bowl.  
For some foods, use the blunt edge. Try the sharp blade first. If not satisfied  
with results, try the blunt blade for grinding coffee beans and spices, and for  
chopping hard food such as peppercorns and seeds.  
4. Lift the Plastic Sheath by its gripping ridges and remove the Blade  
Assembly. NEVER T OUCH T H E BLADE IT SELF.  
Selecting the Right Operating Speed:  
5. Remove the contents of the bowl to another container.  
Always use Speed 4 with the Chopper Grinder.  
6. Carefully remove the Blade Ring, holding it by its Central Hub Holding  
Ribs. Turn blade upside down and reinsert it on the Sheath.  
Note: Due to the powerful motor provided with this unit, Cuisinart recom-  
mends using both hands to support the SmartStick™ Mini Prep Chopper  
Grinder during operation. Place one hand on the SmartStick™ Hand  
Blender control handle to operate the unit. With the other hand, grasp the  
round top of the Chopper Grinder attachment and apply downward pressure  
on the entire unit to prevent it from moving.  
®
7. Insert the Plastic Sheath over the central opening of the empty bowl.  
8. Insert the food to be processed.  
9. Replace the cover, locking it into place.  
16  
17  
10. Connect the Hand Blender motor body to the Chopper Grinder  
Attachment.  
Operating Techniques:  
Chop, grind, and purée small amounts of food with the SmartStick™ Mini  
11. Plug the SmartStick™ Hand Blender into the electrical outlet and  
continue processing.  
®
Prep Chopper Grinder attachment. This table lists a number of ingredients in  
alphabetical order, and shows the recommended method of processing for each.  
Speed 3 or Speed 4 should always be used with the Chopper Grinder  
Attachment. Use the sharp blade for most chopping tasks.  
Processing Food  
1. Place the Prep Bowl firmly on a flat sturdy surface like a countertop. Be  
sure the blade is assembled using the blade edge that is appropriate for  
the food to be processed.  
Frequent uses for Chopper Grinder  
Ingredient  
Comments  
2. Place food in the Prep Bowl. Be sure the food is cut in small pieces, and  
the bowl is not overloaded.  
3. Place the Chopper Grinder cover on top of the prep bowl. Be sure the  
cover is properly seated.  
carrots, uncooked  
celery  
1/2 cup in 1/2" pieces  
1/2 cup in 1/2" pieces, remove strings  
4. Select Speed 4 on the SmartStick™ Hand Blender Speed Control.  
5. Press the ON/OFF button on the SmartStick™ Hand Blender Speed  
cheese (hard)  
grate no more than 1 ounce  
at a time, cut into 1/4" pieces  
Control to run the Chopper Grinder.  
Note: Due to the powerful motor provided with this unit, Cuisinart  
recommends using one hand to support the Chopper Grinder  
during operation.  
bread crumbs  
chocolate  
1/2 cup day old bread in 1/2" pieces  
grate no more than 1 ounce at a time, break into 4 pieces,  
chill in freezer for 3 minutes before chopping  
6. When you have finished processing the food, stop the machine by taking  
your thumb or finger off the ON/OFF button.  
7. WH EN T H E BLADE ST OPS MOVING, remove the SmartStick™  
Hand Blender motor body from the Chopper Grinder cover, and remove  
the cover from the Chopper Grinder.  
garlic  
1 clove, peeled; mince up to 3-4 cloves  
1/2 ounce (about a 1" piece), cut into 1/4" pieces  
1/2 cup, must be clean and dry  
1/2 cup, shells removed  
ginger root  
herbs, fresh  
nuts  
8. Unplug the unit.  
9. Carefully remove the Blade Assembly, holding it by the gripping ridges  
on the Plastic Sheath. NEVER T OUCH T H E BLADE IT SELF.  
10. Remove food with the spatula.  
onion  
1/2 cup in 1/2" pieces  
Note: Do not operate the SmartStick™ Chopper Grinder attachment  
without food contents in the Prep Bowl.  
vegetables-cooked  
vegetables-uncooked  
1/2 cup in 1/2" pieces  
1/2 cup in 1/2" pieces  
18  
19  
RECIPE SUGGEST IONS  
Sauces/Soups  
CLEANING:  
Smartstick™ H and Blender  
LENTIL VEGETABLE SOUP  
Always clean the SmartStick™ Extendable Shaft Hand Blender  
thoroughly after using.  
Lentil and tomato flavors combine as they simmer together to create a rich,  
hearty soup.  
Remove the shaft with the blade from the motor body. The shaft with the  
blade and the mixing/measuring beaker can be cleaned in the dishwasher, or  
by hand in hot water with a mild detergent. It is not necessary to remove the  
blade from the shaft.  
Makes 6 quarts (about 24 8-ounce servings)  
1/2  
8
4
4
4
9
4
2
cup olive oil  
medium celery ribs, peeled, cut into 1" pieces  
medium carrots, peeled, cut into 1" pieces  
medium onions, peeled, cut into 1" pieces  
medium red bell peppers, cored, cut into 1" pieces  
cups water  
Clean the motor body with a sponge or damp cloth only. Do not use abrasive  
cleansers which could scratch the surface.  
Never immerse the motor body in water.  
When the appliance has malfunctioned or has been dropped or damaged in  
any way or it is not operating properly, return the appliance to the nearest  
Cuisinart Repair Center for examination, repair, mechanical or electrical  
adjustment.  
28-ounce cans plum tomatoes, drained  
cups lentils  
4
1
tablespoons red wine vinegar  
tablespoon chili powder  
Pepper and salt to taste  
Suggestion: When processing foods with color (like carrots), the plastic parts  
of the appliance can become discolored. Wipe these parts with cooking oil  
before cleaning them with a mild detergent.  
SmartStick™ Mini Prep® Chopper Grinder  
2
cups coarsely chopped parsley  
Attachment  
Heat oil in a large stockpot over medium-high heat. Add celery, carrots,  
onions and peppers; cover and cook, stirring often, until soft, about 10  
minutes. Add water, tomatoes, lentils, vinegar, chili powder, pepper and salt.  
Increase heat to high. Cover and bring to the boil. Reduce heat to low and  
simmer, partially covered, stirring occasionally, until lentils are tender, about  
30-35 minutes. Insert the SmartStick™ Extendable Shaft Hand Blender fit-  
ted with the metal blade. Set on Speed 4 and blend until puréed, about 2-1/2  
minutes. Stir in parsley.  
To simplify cleaning, rinse the Prep Bowl, cover and blade immediately after  
use, so that food won’t dry onto them. Wash Blade Ring, Plastic Sheath, and  
Prep Bowl in warm soapy water. Rinse and dry. Wipe the underside of the  
Chopper Grinder cover with a sponge or damp cloth to remove any food. Do  
not submerge the cover in water or place in the dishwasher. Wash the blade  
carefully. Avoid leaving it in soapy water where it may disappear from sight.  
If you have a dishwasher, you can wash the Prep Bowl Blade Assembly on the  
upper shelf. Insert the Prep Bowl upside down. Put the blade in the  
cutlery basket. Unload the dishwasher carefully to avoid contact with the  
sharp blade. Wipe the motor body and top of the cover with a damp sponge  
or cloth. Dry it immediately. Never submerge the motor body or the cover in  
water or other liquid.  
Soup may be frozen in an airtight container for later use.  
Nutritional information per serving:  
Calories 218 (25% from fat) • carbo. 32g • prot. 9g • fat 6g • sat. fat 1g • chol. 0mg  
sod. 292mg  
®
The SmartStick™ Mini Prep Chopper Grinder attachment is intended for  
HOUSEHOLD USE ONLY. Any service, other than cleaning and normal  
user maintenance, should be performed by an authorized Cuisinart Service  
Representative.  
20  
21  
FRESH TOMATO - ZUCCHINI BISQUE  
QUICK CUISINART TOMATO SAUCE  
Our basic recipe. Add your own special ingredients to create a signature sauce.  
Makes 3-3/4 quarts (about 30 4-ounce servings)  
This light bisque is highlighted with green and white flecks of shredded  
zucchini.  
Makes 2-1/2 quarts (about 10 8-ounce servings)  
2
tablespoons olive oil  
3
1
1
4
3
3
2
tablespoons olive oil  
large garlic clove, peeled  
large onion, peeled, cut into 1" pieces  
cups low sodium beef broth  
pounds tomatoes, stems removed, cut into 1" pieces  
tablespoons tomato paste  
teaspoons sugar  
Black pepper and salt to taste  
cup half and half  
large zucchini, shredded  
tablespoons chopped parsley  
tablespoons chopped fresh marjoram  
10  
5
shallots, peeled, coarsely chopped  
28-ounce cans whole tomatoes, drained  
2-1/2 teaspoons dried oregano  
2-1/2 teaspoons sugar  
2
teaspoons salt  
Heat oil in a stockpot over medium heat. Add shallots and sauté until  
translucent, about 2 - 3 minutes. Add tomatoes and remaining ingredients;  
reduce heat to low. Cover and simmer, stirring occasionally, until thick, about  
25 - 30 minutes. Insert the SmartStick™ Extendable Shaft Hand Blender  
fitted with the metal blade. Process on Speed 4 until smooth, about  
1-1/2 minutes. If a chunkier texture is desired, process for about 1 minute.  
3/4  
1
4
2
Nutritional information per serving:  
Calories 41 (22% from fat) • carbo. 7g • prot. 1g • fat 1g • sat. fat 0g • chol. 0mg  
sod. 169mg  
Heat oil in a large stockpot over medium heat. Add garlic and onion; sauté  
until tender but not browned, about 4 - 6 minutes. Add broth, tomatoes,  
tomato paste, sugar, pepper and salt. Increase heat to high and bring to a  
boil; reduce heat to medium and cook, partially covered, until tomatoes are  
tender, about 20 minutes.  
BUTTERNUT - PEAR SOUP  
A truly impressive combination of flavors plus lovely color and texture  
distinguish this soup.  
Insert the SmartStick™ Extendable Shaft Hand Blender fitted with the metal  
blade and process on Speed 4 until well combined, about 35-45 seconds. Add  
half and half; blend until just combined, about 10 seconds. Bring to a simmer  
over medium heat. Add zucchini, parsley and marjoram and gently cook until  
just tender, about 2 - 4 minutes.  
Makes 3 quarts (about 12 8-ounce servings)  
2
3
2
2
medium leeks  
tablespoons butter  
medium carrots, peeled, cut into 1" pieces  
medium celery ribs, peeled, cut into 1" pieces  
Nutritional information per serving:  
Calories 127(50% from fat) • carbo. 12g • prot. 4g • fat 7g • sat. fat 2g • chol. 7mg  
sod. 54mg  
2-1/2 pounds butternut squash, peeled, seeded, cut into 1" pieces  
1-1/2 pounds Bartlett pears, peeled, cored, cut into 1" pieces  
6
cups low fat reduced sodium chicken broth  
Bouquet garni (bay leaf, sprig thyme, parsley sprigtie  
together in cheese cloth)  
2/3  
1/4  
1/4  
cup half and half  
teaspoon cayenne pepper  
teaspoon nutmeg  
Pepper and salt to taste  
Trim leeks at root end and 1" above white; slit lengthwise and rinse well  
under cold running water. Cut into 1" pieces.  
22  
23  
STRAWBERRY COCKTAILS  
Place butter in a stockpot and melt over medium heat. Add leeks, carrots and  
celery; sauté until softened but not browned, about 6-8 minutes, stirring  
occasionally. Add squash, pears, broth and bouquet garni. Increase heat to  
high; cover and bring to a boil. Reduce heat to low and simmer, partially  
covered, until vegetables are tender, about 20 minutes. Insert the  
SmartStick™ Extendable Shaft Hand Blender fitted with the metal blade.  
Set to Speed 4 and process until smooth, about 1-1/2 minutes. Add half  
and half, cayenne pepper, nutmeg, pepper and salt. Blend on Speed 4 until  
combined, about 15 seconds. Serve warm.  
This strawberry-banana cocktail is similar to a frozen daiquiri. For a  
creamy nonalcoholic version, substitute whole milk for the rum.  
Makes 3-1/2 cups (about 7 4-ounce servings)  
1
1
4
4
1
12-ounce bag frozen unsweetened strawberries, thawed  
medium banana, peeled, cut into 1" pieces  
tablespoons superfine sugar  
tablespoons freshly squeezed lime juice  
cup light rum  
Nutritional information per serving:  
Calories 145 (31% from fat) • carbo. 21g • prot. 4g • fat 5g • sat. fat 3g • chol. 13mg  
sod. 210mg  
Crushed ice  
Place first 5 ingredients (not ice) in a tall pitcher (about 1-1/2 quart capacity).  
Insert the SmartStick™ Extendable Shaft Hand Blender fitted with the metal  
blade. Set on Speed 4 and blend with a gentle up-and-down motion until  
combined, about 20 seconds. Pour into glasses filled with crushed ice and  
garnish with whole fresh strawberries, if desired.  
Beverages  
Nutritional information per serving:  
Calories 122 (0% from fat) • carbo. 13g • prot. 0g • fat 0g • sat. fat 0g • chol. 0mg  
sod. 2mg  
CARIBE PUNCH  
Apricot nectar and citrus juices mellow with rum to make a delectable, tart  
refresher.  
CUISINART BLOODY MARYS  
Makes 1 quart (about 6 5-ounce servings)  
This spicy, cool and refreshing drink is delicious for brunch or an outdoor  
summer party.  
1
1
cup apricot nectar, chilled  
cup orange juice, chilled  
Makes 1 quart (about 6 5-ounce servings)  
1
cup pineapple juice, chilled  
cup dark rum  
cup freshly squeezed lime juice (about 3 medium limes)  
tablespoon grenadine syrup  
small limes, thinly sliced  
3/4  
1/4  
1
2
1
3
cups tomato juice  
2
2
1/2  
1/4  
5
tablespoons fresh lemon juice  
teaspoons Worcestershire sauce  
teaspoon garlic powder  
teaspoon black pepper  
drops Tabasco sauce  
cup Vodka  
small orange, thinly sliced  
Put first 6 ingredients in a tall pitcher (about 1-1/2 quart capacity). Insert the  
SmartStick™ Extendable Shaft Hand Blender fitted with the metal blade. Set  
on Speed 4 and process with a gentle up-and-down motion until frothy,  
about 10 seconds. Add sliced fruit and serve over ice.  
3/4  
Fresh cilantro sprigs  
Fresh celery ribs  
Place first 7 (not cilantro or celery) ingredients into a tall pitcher (about 1-  
1/2 quart capacity). Insert the SmartStick™ Extendable Shaft Hand Blender  
fitted with the metal blade. Set on Speed 4 and process with a gentle up-and-  
down motion until combined, about 10 seconds. Add vodka and process to  
mix, about 5 seconds. Pour into glasses filled with ice; garnish with cilantro  
and celery.  
Nutritional information per serving:  
Calories 160 • (0% from fat) • carbo. 32g • prot. 1g • fat 0g • sat. fat 0g • chol. 0mg  
sod. 3mg  
Nutritional information per serving:  
Calories 91 (0% from fat) • carbo. 6g • prot. 1g • fat 0g • sat. fat 0g • chol. 0mg  
sod. 437mg  
24  
25  
Desserts  
FOR H OUSEH OLD USE ONLY  
SWEETENED WHIPPED CREAM  
CUISINART ® SMART ST ICK™ EXT ENDABLE SH AFT  
H AND BLENDER 3-YEAR LIMIT ED WARRANT Y  
Whip cream to a fluffy consistency in seconds.  
Makes 1-1/2 cups whipped cream  
This limited warranty is available to consumers only. You are a consumer if  
1
2
cup whipping cream*  
teaspoons sugar  
®
you own a Cuisinart SmartStick™ Extendable Shaft Hand Blender which  
was purchased at retail for personal, family or household use. Except as oth-  
erwise required under applicable state law, this warranty is not available to  
retailers or other commercial purchasers or owners.  
1/2  
teaspoon vanilla extract  
Place all ingredients in Mixing Beaker. Place the SmartStick™ Extendable  
Shaft Hand Blender fitted with the Whipping Disc, into the Beaker. Set on  
Speed 2, turn the Hand Blender ON and run for 10 seconds. Then use a  
gentle up-and-down motion to whip the cream until thickened, about 55-60  
seconds.  
®
We warrant that your Cuisinart SmartStick™ Extendable Shaft Hand  
Blender will be free of defects in materials and workmanship under normal  
home use for three years from the original date of purchase.  
We suggest you complete and return the enclosed warranty registration card  
promptly. However, return of the card is not a condition of this warranty and  
does not eliminate the need for the consumer to maintain the original receipt  
of purchase.  
*You may substitute heavy cream  
Nutritional information per tablespoon:  
Calories 40 (90% from fat) • carbo. 1g • prot. 0g • fat 4g • sat. fat 3g • chol. 16mg  
sod. 4mg  
If your unit should prove to be defective within the warranty period, we will  
repair or replace it at our option without charge to you. To obtain warranty  
service, simply send the defective product to: Cuisinart, 150 Milford Road.,  
E. Windsor, NJ 08520 or call toll-free 800-726-0190.  
To facilitate the speed and accuracy of your return, please also enclose $7.00  
for shipping and handling of the product. CA residents need only provide  
proof of purchase. Please be sure to include a return address, description of  
the product defect, product serial number and any other information  
pertinent to the products return. Please pay by check or money order.  
®
Your Cuisinart SmartStick™ Extendable Shaft Hand Blender has been man-  
ufactured to the strictest specifications and has been designed for use with  
®
authorized Cuisinart accessories and replacement parts. This warranty  
expressly excludes any defects or damages caused by accessories, replacement  
parts or repair service other than those which have been authorized by  
Cuisinart. This limited warranty does not cover any damage caused by  
accident, misuse, shipment or other than ordinary household use.  
THIS WARRANTY EXCLUDES ALL INCIDENTAL OR CONSE-  
QUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE  
EXCLUSION OR LIMITATION OF THESE DAMAGES, SO THESE  
EXCLUSIONS MAY NOT APPLY TO YOU. ALL APPLICABLE  
IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY  
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE, GIVEN TO YOU BY LAW ARE HEREBY LIMITED IN  
DURATION TO THIS WARRANTY. This warranty gives you specific  
legal rights and you may have other rights which vary from state to state.  
®
If you have any questions about the safety features of your Cuisinart  
SmartStick™ Extendable Shaft Hand Blender, please call us, toll-free,  
at 800-726-0190.  
26  
27  
COFFEE  
MAKERS  
FOOD  
PROCESSORS  
T OAST ERS  
H AN D  
M IXERS  
BLENDERS  
COOKWARE  
ICE CREAM  
MAKERS  
Cuisinart offers an extensive assortment of top quality products to make life in the  
kitchen easier than ever. Try some of our other countertop appliances and  
TM  
cookware, and you’ll see why we are Your Kitchen Resource  
.
©2000 Cuisinart  
Cuisinart® is a registered trademark of Cuisinart  
150 Milford Road  
East Windsor, NJ 08520  
Printed in China  
99CU13009  
IB-3028D  
28  

Alesis POWER AMPLIFIER RA500 User Manual
Apollo Car Stereo System 15SL15 User Manual
Bogen Communications Car Amplifier CHS 35A User Manual
Bosch Appliances Car Video System A5 User Manual
ClearOne comm ClearOne Communications Camcorder 910 171 101 PAL User Manual
Cobra Digital DVC3300 User Manual
Gitzo GT3531S User Manual
HP (Hewlett Packard) HP 50g User Manual
Jensen Car Video System JMV12 User Manual
JL Audio Stealthbox M 770x User Manual