Cam era Control overview
Video cameras are an integral part of today’s AV and
automation system designs, supporting videoconferencing,
broadcast, AV presentation, observation, surveillance, and
documentation purposes in boardrooms, courtrooms,
council chambers, residences, operating rooms, focus
group rooms, and houses of worship. Crestron delivers
high-performance products and solutions to streamline the
integration of today’s generation of professional cameras
as part of any complete system.
Crestron’s family of camera control products takes full
advantage of the steadfast Cresnet® control network to
support up to 252 pan/tilt heads, camera controllers, and
other devices, all under the command of a 2-Series control
system. Ethernet connectivity solutions are offered as
well to enable control over existing infrastructure from any
remote distance. User interface options are virtually unlimited,
including intuitive and reliable joystick control and extending to
color video touchpanels and Crestron’s advanced IP-based
e-Control®2 XPanel control solutions.
Typical M ulti Cam era Application
CAM ERA CONTROL
C a m e r a C o n t r o lle r
Digital Joystick Cam era Controller C 2 N -C A M ID J
C o n n e c t o r s
NET: 4-pin 5m m detachable term inal block
Cresnet slave port, connects to Cresnet control netw ork
P o w e r R e q u ir e m e n t s
Cresnet Pow er Usag e: 4 Watts (0.17 Am ps @ 24 Volts DC)
En v ir o n m e n t a l
Tem perature: 41° to 113°F (5° to 45°C)
H um idity: 10% to 90% RH (non-condensing)
En c lo s u r e
Black/silver m etal, tabletop consolette w ith integral w rist-rest
D im e n s io n s
H eig ht: 5.33 in (13.54 cm )
W idth: 9.44 in (23.98 cm )
Depth: 7.71 in (19.58 cm )
W e ig h t
3.2 lbs (4.5 kg)
435
© 2007 Specifications subject to change without notice
CAM ERA CONTROL
P a n /Tilt H e a d
C 2 N -C A M ID SPT Digital Servo Pan/Tilt Head
C r e s n e t® N e tw o r k C o n tr o l—Designed for use w ith the
2-Series control system , the C2N-CAM IDSPT takes full
advantage of the steadfast Cresnet control netw ork to
support up to 252 pan/tilt heads, cam era controllers,
touchpanels, and other devices. Up to 100 user presets
are stored directly onboard the pan/tilt head, significantly
reducing netw ork traffic by m inim izing the need for reporting
position data to the control system . Ethernet connectivity
is easily attained through the control system , enabling full
control over existing infrastructure from any rem ote distance.
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Digital Servo Technology
Ultra fast, quiet, and precise pan/tilt operation
Bidirectional RS-232 and analog lens control ports
Supports camera/lens combinations up to 15 lbs.
100 onboard user presets
The C2N-CAM IDSPT is a state-of-the-art cam era pan/tilt
head offering ultra fast, quiet and precise cam era and lens
control for videoconferencing, recording, distance learning,
in-house television, and live video applications. The com pact
device supports a vast range of popular cam eras and lenses
w eighing up to 15 lbs (6.8 kg). Full control of the pan/tilt
m ovem ent, plus cam era and lens functions, can be provided
using the C2N-CAM IDJ Digital Joystick Controller or any
Crestron touchpanel or rem ote.
Cresnet network communication
SPEC IFIC ATION S
P e r f o r m a n c e
Pan Travel: ±177° using soft stops; ±170° using hard stops
Tilt Travel: ±90° using soft or hard stops
Pan Speed: 60 degrees per second m axim um
Tilt Speed: 60 degrees per second m axim um
Repeatability: ±3 arc m inutes
W eig ht Capac ity: 15 lbs (6.8 kg) m axim um (properly
balanced load)
Presets: 100 stored locally; unlim ited via Cresnet
D ig ita l Se r vo Te c h n o lo g y—With pan and tilt speeds of
60 degrees per second, the C2N-CAM IDSPT offers the
fastest perform ance in its league. Pulse-w idth m odulation
and digital servo technology deliver quick, sm ooth response
w ith rem arkably quiet operation. Nearly 360 degrees of pan
and 180 degrees of tilt travel provide essentially lim itless
m ovem ent w ith extrem ely precise positioning achieved using
digital optical encoders instead of analog potentiom eters.
Adjustable hard stops on both pan and tilt axes can be set
to lim it m ovem ent and prevent potential dam age to the
cam era and lens. Setup is m ade easy using the built-in
5-w ay m ini joystick to provide local position and lens control.
C o n n e c t o r s
LEN S: (1) DB15HD fem ale
Output Voltages: ±12V, ±8V, or ±6V m otor; 2.5/7.5V servo
Provides zoom , focus, and iris control plus additional lens functions
RS-2 3 2 : (1) DB9 m ale
Bidirectional RS-232 port for device control and firm w are upload
Up to 38.4K baud, hardw are handshaking support
NET: (1) 4-pin 5m m detachable term inal block
Cresnet slave port, connects to Cresnet control netw ork
Le n s Pe r s o n a lity M o d u le s —External plug-in personality
m odules define the C2N-CAM IDSPT’s lens configuration,
w ith m odules provided for 6, 8, and 12 Volt m otorized lenses
as w ell as 2.5 to 7.5 Volt servom otor lenses. Both “position”
and “speed” m odes are available for controlling servom otor
lenses, allow ing im m ediate m ovem ent to a specified position
as w ell as sm ooth variable speed control. Lenses equipped
w ith potentiom eter feedback are also supported, and a fully
program m able RS-232 port is built in to provide bidirectional
com m unication for control of serial-controllable cam eras and
double hot shoe type lenses.
C o n t r o ls
M IN I JOYSTICK: (1) 5-w ay m iniature button/joystick for local
position and lens control
SETUP: Used for touch-settable ID (TSID)
L ED In d ic a t o r s
PW R: (green) Indicates 24 Volts DC pow er supplied from Cresnet
control netw ork
NET: (yellow ) Indicates com m unication w ith Cresnet system
SETUP: (red) Indicates TSID or dow nload in progress
436
© 2007 Specifications subject to change without notice
CAM ERA CONTROL
P a n /Tilt H e a d
Digital Servo Pan/Tilt Head C 2 N -C A M ID SPT
P o w e r R e q u ir e m e n t s
Cresnet Pow er Usag e: 60 Watts (2.5 Am ps @ 24 Volts DC)
Requires dedicated CNPWS-75 or dedicated channel of
C2N-SPWS300, both sold separately
En v ir o n m e n t a l
Tem perature: 41° to 104°F (5° to 40°C)
H um idity: 10% to 90% RH (non-condensing)
En c lo s u r e
Wall or ceiling m ount installation (cam era bracket included; w all and
ceiling m ounts sold separately)
D im e n s io n s
H eig ht: 6.52 in (16.56 cm )
W idth: 5.52 in (14.02 cm )
Depth: 5.49 in (13.94 cm )
(Dim ensions do not include cam era or cam era bracket)
W e ig h t
12.0 lbs (5.44 kg)
AVA ILA B LE A C C ESSORIES
ꢀ
ꢀ
C2 N -CAM I-W M T
ꢀ
CN SP-XX
ꢀ
CN PW S-75
ꢀ
C2 N -SPW S3 0 0
Wall Mount
Custom Serial Interface Cable
75 Watt Cresnet Power Supply
300 Watt Cresnet Power Supply
C2 N -CAM I-W M T
Ceiling Mount
437
© 2007 Specifications subject to change without notice
CAM ERA CONTROL
A c c e s s o r ie s
PA N /TILT H EA D A C C ESSORIES
C 2 N -C A M I-W M T W a ll M o u n t fo r C 2 N -C A M ID SPT
The C2N-CAM I-WM T is a w all m ount accessory
for the C2N-CAM IDSPT Digital Servo Pan/Tilt Head.
Designed for installation to any secure vertical
surface, the C2N-CAM I-WM T is constructed of steel
and finished in black w ith an overall length of 19.75
inches (50.17 cm ) to provide adequate support and
clearance for m ost cam era/lens com binations. The
m axim um load rating is 40 pounds (88 kg).
C 2 N -C A M I-C M T C e ilin g M o u n t fo r C 2 N -C A M ID SPT
The C2N-CAM I-CM T is a ceiling m ount accessory
for the C2N-CAM IDSPT Digital Servo Pan/Tilt Head.
Designed for installation to any secure horizontal
surface, the C2N-CAM I-CM T is constructed of steel
and finished in black w ith a height of 8.0 inches
(20.32 cm ) to provide adequate clearance and
easy positioning to accom m odate m ost cam era/
lens com binations. The m axim um load rating is
40 pounds (88 kg).
438
© 2007 Specifications subject to change without notice
|