Clarion PE 2322B User Manual

Owner’s manual  
Mode d’emploi  
Manual de instrucciones  
AM/FM CD/CASSETTE PLAYER WITH CD/MD  
CHANGER CONTROL  
RADIO AM/FM-LECTEUR CD/CASSETTE AVEC  
PILOTAGE DE CHANGEUR CD/MD  
RADIO DE AM/FMY REPRODUCTOR DE  
CD/CASETES CON CONTROL DE  
CAMBIADOR DE CD/MD  
Clarion Co., Ltd.  
PE-2322B  
280-7452-00  
All Rights Reserved. Copyright © 2000: Clarion Co., Ltd.  
Printed in China / Imprimé en Chine / Inpreso en China  
2000/2 (D/To•C)  
Thank you for purchasing the Clarion Product.  
Please read this owner’s manual in its entirety before operating this equipment.  
After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).  
Check the contents of the enclosed warranty card and keep it carefully with this manual.  
This manual includes the operating procedures of the CD changer, MD changer and TV connected  
via the CeNET cable. The CD changer, MD changer and TV tuner have their own manuals, but no  
explanations for operating them are described.  
Contents  
1. FEATURES ..................................................................................................................................... 2  
2. PRECAUTIONS .............................................................................................................................. 3  
Handling Compact Discs................................................................................................................. 4  
Handling Cassette tape................................................................................................................... 4  
3. CONTROLS .................................................................................................................................... 5  
4. NOMENCLATURE .......................................................................................................................... 6  
Names of Buttons............................................................................................................................ 6  
Display Items ................................................................................................................................... 6  
5. REMOTE CONTROL ...................................................................................................................... 7  
Inserting the Batteries ..................................................................................................................... 7  
Functions of Remote Control Unit Buttons ..................................................................................... 8  
6. OPERATIONS ................................................................................................................................. 9  
Basic Operations ............................................................................................................................. 9  
Radio Operations .......................................................................................................................... 11  
CD Operations............................................................................................................................... 13  
Tape Operations ............................................................................................................................ 14  
Other Handy Functions ................................................................................................................. 16  
7. OPERATIONS OF ACCESSORIES ............................................................................................. 18  
CD Changer Operations ............................................................................................................... 18  
MD Changer Operations ............................................................................................................... 20  
TV Operations ............................................................................................................................... 21  
8. TROUBLESHOOTING .................................................................................................................. 23  
9. ERROR DISPLAYS ....................................................................................................................... 24  
10. SPECIFICATIONS ........................................................................................................................ 25  
1. FEATURES  
8-Times Oversampling Digital Filter and Dual 1-Bit D/A Converters  
Zero-Bit DetectorTM Mute Circuit  
Full Logec Tape Transport with True Function / Auto Reverse with Dual Azimuth Adjust  
Dolby® B Noise Reduction  
® FM Reception System  
Controller for Optional TV Tuner Modules  
Capability to Read CD TEXT Data from Clarion Compatible CD Changer  
Z-Enhancer with 3 Adjustment Modes  
Repeat / Random Play / Intro Music Scan  
CeNET with Balanced Audio Line Transmission and Dynamic Noise Canceling  
Multi-color FL Display  
Bass Control Center Frequency : 30Hz / Boost Level : ±13dB  
4-Channel RCA Line Level Output with Fader Control  
180W(45W×4) Maximum Power Output  
2
ADX5655z  
Hand  
2. PRECAUTIONS  
Use only  
1. When the inside of the car is very cold and  
the player is used soon after switching on the  
heater, moisture may form on the disc or the  
optical parts of the player and proper play-  
back may not be possible. If moisture forms  
on the disc, wipe it off with a soft cloth.If mois-  
ture forms on the optical parts of the player,  
do not use the player for about one hour.The  
condensation will disappear naturally allow-  
ing normal operation.  
2. Driving on extremely bumpy roads which  
cause severe vibration may cause the sound  
to skip.  
Do not p  
Handl  
3. This unit uses a precision mechanism. Even  
in the event that trouble arises, never open  
the case, disassemble the unit, or lubricate  
the rotating parts.  
• New d  
the ed  
may n  
ball-po  
ness fr  
.
This equipment has been tested and found to  
comply with the limits for a Class B digital de-  
vice, pursuant to Part 15 of the FCC Rules.  
CAUTION  
USE OF CONTROLS, ADJUSTMENTS, OR  
PERFORMANCE OF PROCEDURES OTHER  
THAN THOSE SPECIFIED HEREIN, MAY RE-  
SULT IN HAZARDOUS RADIATION EXPO-  
SURE.  
These limits are designed to provide reasonable  
protection against harmful interference in a resi-  
dential installation.  
• Never  
pact d  
pen.  
This equipment generates, uses, and can radi-  
ate radio frequency energy and, if not installed  
and used in accordance with the instructions,  
may cause harmful interference to radio com-  
munications.However, there is no guarantee that  
interference will not occur in a particular instal-  
lation.  
THE COMPACT DISC PLAYER SHOULD NOT  
BE ADJUSTED OR REPAIRED BY ANYONE  
EXCEPT PROPERLY QUALIFIED SERVICE  
PERSONNEL.  
• Never  
tape or  
If you t  
not be  
or it m  
• Do no  
scratch  
of such  
age.  
CHANGES OR MODIFICATIONS NOT EX-  
PRESSLY APPROVED BY THE MANUFAC-  
TURER FOR COMPLIANCE COULD VOID  
THE USER’S AUTHORITYTO OPERATE THE  
EQUIPMENT.  
If this equipment does cause harmful interfer-  
ence to radio or television reception, which can  
be determined by turning the equipment off and  
on, the user is encouraged to consult the dealer  
or an experienced radio/TV technician for help.  
INFORMATION FOR USERS:.  
CHANGES OR MODIFICATIONS TO THIS  
PRODUCT NOT APPROVED BY THE MANU-  
FACTURER WILL VOID THE WARRANTY  
AND WILL VIOLATE FCC APPROVAL.  
Hand  
Using an  
can cau  
MODEL  
12V  
GROUND  
• Casse  
• Casse  
tion be  
AM 530-1710kHz/FM 87.9-107.9MHz  
This device complies with Part 15 of the FCC Rules. Operation is subject to  
the following two conditions  
interference,and (2) This device must accept any interference received,  
including interference that may cause undesired operation.  
:
(1) This device may not cause harmful  
• Casse  
betwee  
• Casse  
corded  
This Production complies DHHS Rules 21 CFR subchapter  
date of manufacture.  
J
applicable at  
CLARION CO.,LTD.  
50 KAMITODA , TODA-SHI, SAITAMA-KEN, JAPAN.  
MANUFACTURED:  
d
Dolby noise reduction manufactured under license from Dolby Laboratories  
Licensing Corporation.  
“DOLBY” and the double-D symbol are trademarks of Dolby Laboratories  
Licensing Corporation.  
Handl  
• Slack  
particu  
90-min  
before  
051 722 877  
286-  
Clarion Co.,Ltd.  
MADE IN  
SERIAL No.  
PE-  
Bottom View of Source Unit  
ADX5655z  
3
Handling Compact Discs  
Use only compact discs bearing the  
mark.  
ch  
nd  
Do not play heart-shaped, octagonal, or other specially shaped compact discs.  
To remove a compact disc from its storage  
Handling  
case, press down on the center of the case and  
lift the disc out, holding it carefully by the edges.  
• Do not use commercially available CD protec-  
tion sheets or discs equipped with stabilizers,  
etc. These may damage the disc or cause  
breakdown of the internal mechanism.  
en  
en  
ate  
• New discs may have some roughness around  
the edges. If such discs are used, the player  
may not work or the sound may skip. Use a  
ball-point pen or the like to remove any rough-  
ness from the edge of the disc.  
Ball-point pen  
Roughness  
Storage  
• Do not expose compact discs to direct sunlight  
or any heat source.  
• Do not expose compact discs to excess hu-  
midity or dust.  
• Do not expose compact discs to direct heat  
from heaters.  
OR  
ER  
E-  
O-  
• Never stick labels on the surface of the com-  
pact disc or mark the surface with a pencil or  
pen.  
• Never play a compact disc with any cellophane  
tape or other glue on it or with peeling off marks.  
If you try to play such a compact disc, you may  
not be able to get it back out of the CD player  
or it may damage the CD player.  
• Do not use compact discs that have large  
scratches, are misshapen, cracked, etc. Use  
of such discs may cause misoperation or dam-  
age.  
Cleaning  
OT  
NE  
CE  
To remove fingermarks and dust, use a soft  
cloth and wipe in a straight line from the center  
of the compact disc to the circumference.  
• Do not use any solvents, such as commercially  
available cleaners, anti-static spray or thinner  
to clean compact discs.  
X-  
C-  
ID  
• After using special compact disc cleaner, let  
the compact disc dry off well before playing it.  
HE  
IS  
U-  
TY  
Handling Cassette Tapes  
Using any of the following types of cassette tapes  
can cause malfunctions.  
• Avoid using cassettes of 120 minutes or longer.  
(Such cassettes have extremely thin tape, so  
the tape can become stretched or cut.)  
• Periodically play a cleaning cassette in the  
player to clean the head.  
• Keep magnets, screwdrivers, and other iron  
and steel and magnetic items away from both  
cassette tapes and the tape head in the player.  
• Do not oil the cassette mechanism.  
• Do not use any cassette tapes with peeling la-  
bels or deformed cases. Such cassette tapes  
can cause breakdowns.  
• When not using the player, always take the cas-  
sette out of the mechanism. Exposing a cas-  
sette to direct sunlight, extreme temperatures,  
or high humidity can damage the cassette.  
• Cassette tapes with low recording levels  
• Cassette tapes in which the unrecorded sec-  
tion between songs is shorter than 4 seconds  
• Cassette tapes with noise or the like recorded  
between songs  
• Cassette tapes on which there are long unre-  
corded sections in the middle of a song  
Handling precautions  
• Slack in the tape can cause malfunctions. In  
particular for prerecorded cassette tapes and  
90-minute tapes, take up any slack in the tape  
before inserting it into the cassette player.  
Be sure to unfold and read the next page.  
Veuillez déplier et vous référer à la page suivante.  
Cerciórese de desplegar y de leer la página siguiente.  
3
ADX5655z  
4
280-7452-00  
3. CONTROLS  
/
LES COMMANDES  
/
CONTROLES  
4
No  
• B  
Source unit / Appareil pilote / Unidad fuente  
N
¡
)
1
2
3
4
5
6
7
8
9
0
2
3
456 78 9 0 ! @ #$% * ¥& (  
D
1
1
2
3
Display / Afficheur / Visualizador  
12  
3
45  
4
5
6
7
! 0 9  
8
7
6
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.  
Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.  
Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.  
5
ADX5655z  
6
4. NOMENCLATURE  
Note:  
• Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold).  
Names of Buttons  
1 Preset buttons (1 to 6)  
Direct buttons (1 to 6) (7 to 12)  
2 Z-EHCR (z-enhancer) button  
3 DISP (display) button  
4 SPE-ANA (spectrum analyzer) button  
5 SCN (scan) button  
! BAND (band) button  
TOP button  
PROG (programe) button  
@ ENT (enter) button  
Play/pause button  
# TITLE button  
PS/AS (preset scan/auto store) button  
6 RPT (repeat) button  
ADJ (adjust) button  
$ TAPE EJECT button  
% Left button  
BLS (blank skip) button  
Re  
7 POWER button  
¥ Right button  
FUNC (function) button  
& Up button  
8 RDM (random) button  
B NR (Dolby NR) button  
* Down button  
( A-M (audio mode) button  
LOUD (loudness) button  
) CD EJECT button  
¡ CD insertion slot  
Cassette tape insertion slot  
9 ISR (instant station recall) button  
0 MUTE button  
Display Items  
1 RPT (repeat) indication  
2 RDM (random) indication  
3 Operation status indication  
8 Function mode indication  
The names of modes being selected, etc. are  
displayed.  
9 B NR (Dolby NR) indication  
0 BLS (blank skip) indication  
! LOUD (loudness) indication  
In  
The frequency, play time, clock, T-scan,  
D-scan etc. are displayed.  
1.  
4 Z-EHCR (z-enhancer) indication  
5 MANU (manual) indication  
6 ST (stereo) indication  
2.  
7 Preset channel indication (1 to 6)  
Disc number indication (1 to 12)  
No  
Us  
plo  
• W  
w
The disc numbers corresponding to the discs  
in the CD or MD changer light.  
• D  
ie  
itre.  
• D  
• D  
6
ADX5655z  
5. REMOTE CONTROL  
d).  
Receiver for remote control unit  
Operating range: 30° in all directions  
Signal transmitter  
Remote control unit  
are  
Inserting the Batteries  
1. Turn the remote control unit over, then slide  
the rear cover in the direction of the arrow.  
AA (UM-3/1.5V)  
Batteries  
2. Insert the AA (UM-3/1.5V) batteries that came  
with the remote control unit facing in the di-  
rections shown in the figure, then close the  
rear cover.  
Notes:  
Using batteries improperly can cause them to ex-  
plode. Take note of the following points:  
• When replacing batteries, replace both batteries  
with new ones.  
• Do not short-circuit, disassemble or heat batter-  
ies.  
Rear cover  
Rear side  
• Do not dispose of batteries into fire or water.  
• Dispose of spent batteries properly.  
ADX5655z  
7
280-7452-00  
Functions of Remote Control Unit Buttons  
2
Mode  
CD changer  
MD changer  
Radio  
CD  
Tape  
TV  
1.  
Button  
£ FUNC  
Turns power on and off. When pressed and held for 1 second:Turns power off.  
Switches among radio, CD, Tape, CD changer, MD changer and TV.  
¢ BAND  
Plays the first  
track.  
Top play.  
Switches  
reception band.  
Moves the next  
disc in  
increasing  
order.  
Switches the  
side of the tape.  
Switches  
reception band.  
DISC UP  
PROG  
TOP  
Increases and decreases volume (in all modes).  
VOLUME  
Fast-forward  
and rewinds  
tape.  
APC fast-  
forward and  
rewind.  
Moves preset  
channels up  
and down.  
Moves tracks up  
and down.  
When pressed  
and held for 1  
second:  
Fast-forward/  
fast-backward.  
Moves tracks up Moves preset  
§ SEARCH  
and down.  
channels up  
and down.  
Thi  
com  
vic  
When pressed  
and held for 1  
second:  
Fast-forward/  
fast-backward.  
The  
pro  
den  
Switches  
between  
playback and  
pause.  
No function.  
Switches  
between  
playback and  
pause.  
Switches  
between  
playback and  
pause.  
No function.  
PLAY/PAUSE  
Thi  
ate  
and  
ma  
mu  
inte  
lati  
MUTE  
Turns mute on and off.  
ª ISR  
Recalls ISR radio station in memory.  
Press and hold for 2 seconds or longer: Stores current station into ISR memory (radio  
mode only).  
If t  
Switches among main display, sub display and clock display.  
enc  
be  
º DISP  
on,  
or a  
Preset scan.  
When pressed  
and held for 2  
seconds: Auto  
store.  
Fast-forward  
scan.  
Scan play.  
Scan play.  
Preset scan.  
When pressed  
and held for 2  
seconds: Auto  
store.  
SCN  
When pressed  
and held for 1  
seconds: Disc  
scan play.  
PS/AS  
No function.  
Repeat play.  
When pressed  
and held for 1  
second:  
Repeat play.  
Repeat play.  
No function.  
¤ RPT  
When pressed  
and held for 1  
seconds: Disc  
BLS  
Blank tape skip repeat play.  
function turns  
on and off.  
No function.  
Select Dolby  
Noise Reduc-  
tion mode.  
Random play.  
When pressed  
and held for 1  
seconds: Disc  
random play.  
Random play.  
Switches  
between TV and  
VTR.  
RDM  
DOLBY NR  
MONI  
* Some of the corresponding buttons on the source unit and remote control unit have different functions.  
8
ADX5655z  
6. OPERATIONS  
Note: Be sure to read this chapter referring to the front diagrams of  
chapter “3. CONTROLS” on page 5 (unfold).  
Basic Operations  
Radio mode CD mode Tape mode ➜  
CD changer mode MD changer mode ➜  
CAUTION  
TV mode Radio mode...  
External equipment not connected with CeNET  
is not displayed.  
Be sure to lower the volume before switching  
off the unit power or the ignition key.The unit  
remembers its last volume setting. If you  
switch the power off with the volume up, when  
you switch the power back on, the sudden  
loud volume may hurt your hearing and dam-  
age the unit.  
Adjusting the volume  
Press Up button & or Down button * increases  
or decreases the volume.  
The clock is displayed when the ignition key  
is turned to the ACC (accessory) or IGN (igni-  
tion-on) position even when the unit power  
is off. In some cars, the clock may momen-  
tarily disappear when the ignition key is  
turned to the START position. The clock will  
reappear after the engine has started and the  
ignition key is released to the IGN (ignition-  
on) position.  
The volume level is from 0 (minimum) to 33 (maxi-  
mum).  
Switching the display  
Press DISP button 3 to select the desired dis-  
play.  
Each time you press DISP button 3, the display  
switches in the following order:  
Main display  
Turning on/off the power  
Notes:  
• Be careful about using this unit for a long time with-  
out running the engine. If you drain the car’s bat-  
tery too far, you may not be able to start the en-  
gine and this can reduce the service life of the  
battery.  
Sub (title) display  
• System check  
This unit checks what external equipment is con-  
nected to the CeNET. The first time the ACC/Igni-  
tion is turned on (initialization), “SYSTEM” and  
Push PWR” alternately blink in the display. Press  
POWER button 7 to start the system check.When  
complete, press POWER button 7 again to acti-  
vate the unit then the unit appears CHECKING  
COMPLETE.  
Clock display  
1. Press POWER button 7.  
2. The illumination and display on the unit light  
up. The unit automatically remembers its last  
operation mode and will automatically switch  
to display that mode.  
Main display...  
3. Press and hold POWER button 7 for 1 sec-  
ond or longer to turn off the power for the unit.  
Selecting a mode  
1. Press FUNC button 7 to change the mode  
of operation.  
2. Each time you press FUNC button 7, the  
mode of operation changes in the following  
order:  
ADX5655z  
9
280-7452-00  
Basic Operations  
Once selected, the preferred display becomes  
the display default.When a function adjustment  
such as volume is made, the screen will  
momentarily switch to that function’s display,  
then revert back to the preferred display sev-  
eral seconds after the adjustment.  
Adjusting the treble  
1. Press A-M button ( and select “TREB”.  
2. Press Up button & to emphasize the treble,  
or press Down button * to attenuate the  
treble.  
When you have entered a title in a CD, it ap-  
pears in the sub display. If you have not en-  
tered a title, “NO-TTL” appears in the title dis-  
play instead. For information on how to enter a  
title, refer to the subsection “Entering titles”  
in the “Other Handy Functions”.  
The factory default setting is “0”. (Adjustment  
range: 6 to +6)  
3. When the adjustment is complete, press A-M  
button ( several times until the function mode  
is reached.  
You can adjust the way of scrolling a title. For  
the details on it, refer to the subsection  
Adjusting the way of scrolling” in the “Other  
Handy Functions”.  
Adjusting the balance  
1. Press A-M button ( and select “BAL”.  
2. Press Up button & to emphasize the sound  
from the right speaker, or press Down button  
* to emphasizes the sound from the left  
speaker.  
Setting the Z-enhancer  
This unit comes with 3 types of sound tone effects  
stored in memory. Select the one you prefer.  
The factory default setting is “0”. (Adjustment  
range: L13 to R13)  
The factory default setting is “OFF”.  
Each time you press Z-EHCR button 2, the tone  
effect changes in the following order:  
3. When the adjustment is complete, press A-M  
button ( several times until the function mode  
is reached.  
Z-EHCR 1Z-EHCR 2Z-EHCR 3➜  
OFFZ-EHCR 1”...  
• Z-EHCR 1 : bass emphasized  
Adjusting the fader  
1. Press A-M button ( and select “FAD”.  
• Z-EHCR 2 : treble emphasized  
• Z-EHCR 3 : bass and treble emphasized  
2. Press Up button & to emphasize the sound  
from the front speakers, or press Down but-  
ton * to emphasize the sound from the rear  
speakers.  
• OFF  
: no sound effect  
Adjusting the tone  
The factory default setting is “0”. (Adjustment  
range: F12 to R12)  
Press A-M button ( and select the item to ad-  
just. Each time you press A-M button (, the item  
changes in the following order:  
3. When the adjustment is complete, press A-M  
button ( several times until the function mode  
is reached.  
When the Z-enhancer is off  
BASSTREBBALFAD➜  
Function mode...  
Adjusting the Z-enhancer  
1. Press Z-EHCR button 2 and select the Z-  
When Z-enhancer 1, 2 or 3 is set  
Z-EHCRBALFADFunction  
mode...  
enhancer mode (1 to 3) to adjust.  
2. Press A-M button ( and select “Z-EHCR”.  
3. Press Up button & or press Down button *  
Adjusting the bass  
1. Press A-M button ( and select “BASS”.  
to adjusts Z-enhancer.  
When Z-enhancer 1 is selected, you can adjust  
the bass in the range of ±2.  
2. Press Up button & to emphasize the bass,  
or press Down button * to attenuate the bass.  
When Z-enhancer 2 is selected, you can adjust  
the treble in the range of ±2.  
The factory default setting is “0”. (Adjustment  
range: 6 to +6)  
3. When the adjustment is complete, press A-M  
button ( several times until the function mode  
is reached.  
When Z-enhancer 3 is selected, you can adjust  
the bass and treble in the range of ±2.  
4. When the adjustment is complete, press A-M  
button ( several times until the function mode  
is reached.  
10  
ADX5655z  
280-7452-00  
Basic Operations  
Radio Operations  
Turning on/off the loudness  
FM reception  
The loudness effect emphasizes the bass and  
treble to create a natural sound tone. When you  
are listening to music at a low volume, it is rec-  
ommended to use the loudness effect.  
For enhanced FM performance the  
®
tuner includes signal actuated  
stereo control and Multipath noise reduction cir-  
cuits.  
1. Press and hold LOUD button ( for 1 second  
or longer to turn on the loudness effect.When  
the loudness effect is turned on, “LOUD” lights  
in the display.  
Changing the reception area  
This unit is initially set to USA frequency intervals  
of 10kHz for AM and 200kHz for FM.When using it  
outside the USA, the frequency reception range  
can be switched to the intervals below.  
2. Press and hold LOUD button ( for 1 second  
or longer to turn off the loudness effect.  
LOUD” goes off in the display.  
Setting the reception area  
1. Press FUNC button 7 and select the radio  
mode (FM or AM).  
2. While pressing RDM button 8, each time you  
press and hold the number “1” of the Preset  
buttons 1 for 2 seconds or longer, the recep-  
tion area switches from inside the USA to out-  
side the USA or from outside the USA to in-  
side the USA.  
Any station preset memories are lost when the  
reception area is changed.  
Listening to the radio  
1. Press FUNC button 7 and select the radio  
mode.  
2. Press BAND button ! and select the radio  
band. Each time the button is pressed, the  
radio reception band changes in the following  
order:  
FM1 FM2 FM3 AM FM1...  
3. Press Right button ¥ or Left button % to tune  
in the desired station.  
Tuning  
There are 3 types of tuning mode available, seek  
tuning, manual tuning and preset tuning.  
Seek tuning  
1. Press BAND button ! and select the desired  
band (FM or AM).  
If “MANU” is lit in the display, press and hold  
BAND button ! for 1 second or longer.MANU”  
in the display goes off and seek tuning is now  
available.  
2. Press Right button ¥ or Left button % to au-  
tomatically seek to the next station.  
When Right button ¥ is pressed, the station  
is sought in the direction of higher frequencies;  
if Left button % is pressed, the station is  
sought in the direction of lower frequencies.  
ADX5655z  
11  
280-7452-00  
Radio Operations  
Manual tuning  
Recalling a preset station  
There are 2 ways available:Quick tuning and step  
tuning.  
Pressing the corresponding preset button recalls  
the stored radio frequency automatically.  
When you are in the step tuning mode, the  
frequency changes one step at a time. In quick  
tuning mode, you can quickly tune the desired  
frequency.  
1. Press BAND button ! and select the desired  
band (FM or AM).  
1. Press BAND button ! and select the desired  
band (FM1, FM2, FM3 or AM).  
2. Press the corresponding Preset button 1 to  
recall the stored station.  
Press and hold one of the Preset buttons 1  
for 2 seconds or longer to store that station into  
preset memory.  
If “MANU” is not lit in the display, press and  
hold BAND button ! for 1 second or longer.  
MANU” lights in the display and manual tuning  
is now available.  
Preset scan  
Preset scan receives the stations stored in preset  
memory in order. This function is useful when  
searching for a desired station in memory.  
2. Tune into a station.  
Quick tuning:  
Press and hold Right button ¥ or Left button  
% for 1 second or longer to manually tune to  
the desired frequency.  
1. Press PS button 5.  
2. When a desired station is tuned in, press PS  
button 5 again to continue receiving that sta-  
tion.  
Step tuning:  
Press Right button ¥ or Left button % to  
manually tune one step at a time to the de-  
sired frequency.  
Note:  
• Be careful not to press and hold PS button 5 for  
2 seconds or longer, otherwise the auto store func-  
tion engages and the unit starts storing stations.  
Storing a preset station  
Instant station recall (ISR)  
A total of 24 preset positions (6-FM1, 6-FM2, 6-  
FM3, 6-AM) exists to store individual radio  
stations in memory.  
Instant station recall is a special radio preset that  
instantly accesses a favorite radio station at a  
touch of a button.The ISR function even operates  
with the unit in other modes.  
Manual memory  
ISR memory  
1. Select the desired station with seek tuning,  
manual tuning or preset tuning.  
1. Select the station that you wish to store in ISR  
memory.  
2. Press and hold one of Preset buttons 1 for 2  
seconds or longer to store the current station  
into preset memory.  
2. Press and hold ISR button 9 for 2 seconds  
or longer.  
Recalling a station with ISR  
Auto store  
In any mode, press ISR button 9 to turn on the  
radio function and tune the selected radio sta-  
tion. “ISR” appears in the display. Press ISR but-  
ton 9 again to return to the previous mode.  
Auto store selects up to 6 stations and  
automatically stores them into preset memory. If  
auto store cannot tune in all six stations, then it  
stores the strongest stations into memory and  
the other presets untouched.  
1. Press BAND button ! and select the desired  
band (FM or AM).  
2. Press and hold AS button 5 for 2 seconds or  
longer. The stations with good reception are  
stored automatically to the preset buttons.  
12  
ADX5655z  
280-7452-00  
CD Operations  
Loading a CD  
Selecting a track  
Insert a CD into the center of the insertion slot  
with the label side facing up. The CD plays  
automatically after loading.  
Track-up  
1. Press Right button ¥ to move ahead to the  
beginning of the next track.  
Notes:  
2. Each time you press Right button ¥, the track  
advances ahead to the beginning of the next  
track.  
• Never insert foreign objects into the CD insertion  
slot.  
• When a CD is loaded in the unit, CD IN indication  
8 lights in the display. Never try to insert another  
CD in this case.  
Track-down  
1. Press Left button % to move back to the be-  
• Discs not bearing the  
cannot be played by this unit.  
• Some CDs recorded in CD-R mode may not be  
usable.  
mark and CD-ROMs  
ginning of the current track.  
2. Press Left button % twice to move to the be-  
ginning of the previous track.  
• Even when recorded in CD-RW mode, some CDs  
not be usable.  
Fast-forward/fast-backward  
Fast-forward  
Listening to a CD already inserted  
Press and hold Right button ¥ for 1 second or  
longer.  
Press FUNC button 7 to select the CD mode.  
Play starts automatically. If no CD is loaded in  
the unit, “NO DISC” appears in the display.  
Fast-backward  
Press and hold Left button % for 1 second or  
longer.  
Pausing play  
1. Press Play/pause button @ to pause play.  
Top function  
PAUSE” appears in the display.  
The top function resets the CD player to the first  
track of the disc. Press TOP button ! to play the  
first track (track No. 1) on the disc.  
2. To resume CD play, press Play/pause button  
@ again.  
Displaying CD titles  
Scan play  
This unit can display title data for user titles input  
with this unit.  
The scan play locates and plays the first 10  
seconds of each track on a disc automatically.This  
function continues on the disc until it is canceled.  
Press DISP button 3 to display the title.  
The scan play is useful when you want to select a  
Notes:  
desired track.  
• Titles of CD-text CDs cannot be displayed with this  
unit.  
• If the CD playing is a CD-text CD or no user title  
1. Press SCN button 5 to start track scanning.  
T-SCAN” lights in the display.  
has been input, “NO- TTL” appears in the display.  
2. To cancel the scan play, press SCN button 5  
again.T-SCAN” goes off from the display and  
the current track continues to play.  
Ejecting a CD  
Press CD EJECT button ) to eject the CD.Take  
it out from the ejected position.  
If a 5" CD (12 cm) is left in the ejected position for  
15 seconds, the CD is automatically reloaded (Auto  
reload).  
3" CDs (8 cm) are not auto reloaded. Be sure to  
remove it when ejected.  
Notes:  
If you force a CD into before auto reloading,  
this can damage the CD.  
The radio mode is selected automatically 4 seconds  
after CD EJECT button ) is pressed.  
ADX5655z  
13  
280-7452-00  
CD Operations  
Repeat play  
Tape Operations  
Loading a tape  
The repeat play continuously plays the current  
track. This function continues automatically until  
it is canceled.  
Load a tape into the cassette tape insertion slot.  
LOADING” appears in the display and starts  
playing.  
When a metal or chrome bias (70µ sec) tape is  
inserted, the metal bias setting is selected auto-  
matically.  
The cassette tape slot door shuts automatically  
after inserting or ejecting a tape (“Auto shut door  
function”). It protects the tape mechanism from  
any dust.  
1. Press RPT button 6. “T-REPEAT” lights in  
the display and the current track is repeated.  
2. To cancel the repeat play, press RPT button  
6 again. “T-REPEAT” goes off from the dis-  
play and normal play resumes.  
Random play  
Notes:  
• Do not put your hands, fingers or foreign objects  
into the cassette tape insertion slot.  
• When a cassette tape is loaded in the insertion  
slot, “TAPE IN” lights in the display. Never try to  
insert another tape forcibly.  
The random play selects and plays individual tracks  
on a disc in no particular order. This function  
continues automatically until it is canceled.  
1. Press RDM button 8. “T-RANDOM” lights in  
the display, an individual track is selected ran-  
domly and play begins.  
Listening to a tape already inserted  
Press FUNC button 7 to select the tape mode.  
Play starts automatically. If no tape is loaded in  
the unit, “NO CASS” appears in the display.  
2. To cancel the random play, press RDM but-  
ton 8 again. “T-RANDOM” goes off from the  
display and normal play resumes.  
Pausing play  
1. Press Play/pause button @ to pause play.  
PAUSE” appears in the display.  
2. To resume tape play, press Play/pause but-  
ton @ again.  
Ejecting a tape  
PressTAPE EJECT button $ to eject a tape.Take  
it out from the ejected position.  
The radio mode is selected automatically 4 sec-  
onds after TAPE EJECT button $ is pressed.  
Switching to the other side of the tape  
Press PROG button ! to change tape direction  
and playback.  
The tape mechanism automatically reverses direc-  
tion and engage playback at the end of the tape  
(auto reverse).  
Fast-forward/fast-backward  
Fast-forward  
Press Right button ¥.  
Fast-backward  
Press Left button %.  
Canceling FF/REW  
Press Play/pause button @.  
14  
ADX5655z  
280-7452-00  
Tape Operations  
Listening to another source while using FF  
or REW (“monitor mode”)  
Intro tape scan play  
The intro tape scan allows the first 10 seconds of  
all the tracks on the tape to be played.This func-  
tion continues on the tape until it is canceled.  
To listen to the CD, CD/MD changer or AM/FM  
tuner while the mechanism searches, press  
FUNC button 7 to select the desired mode.The  
mechanism will stop automatically when the end  
of the tape is reached.  
1. Press SCN button 5 to start Intro tape scan.  
SCAN” lights in the display.  
2. To cancel the intro tape scan, press SCN but-  
ton 5 again. “SCAN” goes off from the dis-  
play and the current track continues to play.  
Note:  
• Use FUNC button 7 and select the tape function  
to resume tape playback.  
When the end of the tape is reached during  
the intro tape scan, the tape mechanism auto-  
matically reverses direction and continues the  
intro tape scan.  
If you select another mode during the intro tape  
scan, the mechanism automatically makes the  
intro tape scan stop when it finds the next track  
(APC function).  
APC (Auto Program Control) function  
The APC function allows the tape to skip forward  
to the beginning of the next track or rewind to the  
start of the current track.  
Skipping forward to the next track (“APC-  
FF”)  
During tape playback, press Right button ¥ twice  
to fast-forward to the next track. The next track  
stars playing.  
Tape repeat play  
The tape repeat continuously plays the current  
track. This function continues automatically until  
it is canceled.  
Skipping backward to the current track  
(“APC-REW”)  
1. Press RPT button 6. “REPEAT” lights in the  
During tape playback, press Left button % twice  
to rewind to the start of the current track. The  
current track plays from the beginning.  
display and the current track is repeated.  
2. To cancel the repeat play, press RPT button  
6 again.REPEAT” goes off from the display  
and normal play resumes.  
Canceling FF/REW APC to resume playback  
Press Play/pause button @.  
Blank tape skip  
The blank tape skip allows you to skip blank sec-  
tions of tape that are over 12 seconds long.  
Listening to another source while using  
APC (“monitor mode”)  
To listen to the CD, CD/MD changer or AM/FM  
tuner while the mechanism searches, press  
FUNC button 7 to select the desired mode.The  
mechanism will stop automatically when it finds  
the next track (in FF APC) or the start of the cur-  
rent track (in REW APC).  
1. Press and hold RPT button 6 for 1 second  
or longer. “BLS” lights in the display and the  
mechanism fastforward to the next track se-  
lection.  
2. To cancel the blank tape skip, press and hold  
RPT button 6 again.BLS” goes off and nor-  
mal play resumes.  
Note:  
• Use FUNC button 7 and select the tape function  
to resume tape playback.  
Notes:  
The APC, intro tape scan, tape repeat and blank  
skip may not work properly with tapes of the follow-  
ing qualities:  
Tapes on which the recording level is too low.  
Tapes on which there is much noise between se-  
lections.  
Tapes on which there are long pauses in the middle  
of selections.  
Tapes on which there are less than 4 seconds of  
blank space between selections.  
Dolby noise reduction system  
The Dolby noise reduction system increases the  
volume level of high frequency sounds during  
recording and sets it back to their original level  
during play. This system reduces hissing noise  
which is typical of cassette tapes.  
Dolby noise reduction manufactured under license  
from Dolby Laboratories Licensing Corporation.  
Dolby and the double-D symbol are trademarks of  
Dolby Laboratories Licensing Corporation.  
Press B NR button 8 to select Dolby noise re-  
duction. “B NR” lights in the display. Each time  
you press B NR button 8, the Dolby toggles  
between B NR and OFF.  
ADX5655z  
15  
280-7452-00  
Other Handy Functions  
1. Press and hold ADJ button  
#
for 1 second or  
Setting the clock  
1. Press and hold ADJ button # for 1 second or  
longer to switch to the adjustment selection  
display.  
longer to switch to the adjustment selection  
display.  
2. Press Right button ¥ or Left button % to se-  
lect “ANA SENS”.  
2. Press Right button ¥ or Left button % to se-  
3. Press Up button & or Down button * to set  
lect “CLOCK”.  
the sensitivity of the spectrum analyzer.  
3. Press ENT button @.  
You can choose one of “LOW”, “MID” or  
HIGH” for the sensitivity of the spectrum ana-  
lyzer.  
4. Press Right button ¥ or Left button % to se-  
lect the hour or the minute.  
5. Press Up button & or press Down button *  
4. Press ADJ button  
mode.  
#
to return to the previous  
to set the correct time.  
The clock is displayed in 12-hour format.  
6. Press ENT button  
@
to store the time into memory.  
Setting the speed of the spectrum  
analyzer display  
The factory default setting is “HIGH”.  
7. Press ADJ button # to return to the previous mode.  
Note:  
You cannot set the clock when it is displayed with  
only the ignition on. If you drain or remove the car’s  
battery or take out this unit, the clock is reset.While  
setting the clock, if another button or operation is  
selected, the clock set mode is canceled.  
1. Press and hold ADJ button  
#
for 1 second or  
longer to switch to the adjustment selection  
display.  
2. Press Right button ¥ or Left button % to se-  
lect “ANA SPD”.  
Switching the spectrum analyzer  
display patterns  
3. Press Up button & or Down button * to set  
the speed of the spectrum analyzer display.  
You can select one out of 4 patterns or set it to  
off.  
You can choose one of “LOW”, “MID” or  
HIGH” for the speed of the spectrum analyzer  
display.  
The factory default setting is “PATTERN 1”.  
Each time you press SPE-ANA button 4, the  
spectrum analyzer display pattern changes in the  
following order:  
4. Press ADJ button  
mode.  
#
to return to the previous  
PATTERN 1 PATTERN 2 PATTERN 3 ➜  
PATTERN 4 PATTERN 5 PATTERN 6 ➜  
PATTERN 7 PATTERN 8 PATTERN 9 ➜  
OFF PATTERN 1...  
Entering titles  
Titles up to 10 characters long can be stored in  
memory and displayed for radio or TV stations  
and CDs. The numbers of titles that can be  
entered for each mode are as follows.  
Mode  
Number of titles  
30 titles  
Radio mode  
CD mode  
TV mode  
100 titles  
15 titles  
CD changer mode  
CDC655z connected  
CDC655Tz connected  
CDC1255z connected  
Number of titles  
60 titles  
Note:  
The spectrum analyzer display is unavailable dur-  
ing these operations below;  
• Seek tuning and auto store in radio mode.  
100 titles  
50 titles  
• Mute or pause.  
• When “NO DISC” or an error message appears  
in the display.  
1. Press FUNC button 7 to select the mode you  
want to enter a title. (radio, CD, CD changer or  
TV)  
Titles cannot be entered for MDs with this unit.  
2. Select and play a CD or a CD in the CD changer,  
or tune to an appropriate TV or radio station.  
Setting the sensitivity of the spec-  
trum analyzer  
The factory default setting is “MID”.  
3. Press DISP button 3 and display the title.  
16  
ADX5655z  
280-7452-00  
Other Handy Functions  
4. Press TITLE button  
#. “TITL” appears in the  
Clock function  
Time matching  
display and the cursor position flashes.  
5. Press Right button ¥ or Left button % to move  
Regarding the “CLOCK INDICATION”...  
the cursor.  
The unit indicates the clock when the car engine  
is running (when ACC is ON).  
6. Press DISP button 3 to select a character.  
Each time you press DISP button 3, the char-  
acter changes in the following order:  
The clock is of 12-hour indication.  
1. Press the “TITLE” button continuously (for  
about 1 second).  
Capital letters Small letters Numbers/  
Symbols Capital letters...  
[ANA_SENS] is indicated.  
7. Press Right button ¥ or Left button % to se-  
lect the desired character. Pressing Right but-  
ton ¥ moves the cursor to the next charac-  
ter; pressing Left button % moves the cursor  
to the previous character.  
2. Press Left button or Right button and select  
“CLOCK_ _E”  
3. Press the “ENTER” button to indicate the  
clock.  
8. Repeat steps 5 to 7 to enter up to 10 charac-  
ters for the title.  
The clock indicates “AM 12:00” and turns  
to the “time setting” mode.  
9. Press and hold ENT button @ for 2 seconds  
or longer to store the title into memory and  
cancel title input mode.  
4. Press Left button or Right button and select  
“HOUR” or “MINUTE” may adjust items which  
are flashing.  
5. Press Right button or Left button and match  
the time.  
Clearing titles  
1. Play a CD or a CD in a CD changer, or tune a  
radio station or TV station that you want to  
clear the title for.  
6. Press the “ENTER” button.  
7. Press the “TITLE” button.  
The unit returns to the original indication.  
2. Press DISP button 3 and display the sub-  
title.  
Triggered audio mute for cellular  
telephones  
This unit requires special wiring to mute the au-  
dio signal automatically when a cellular telephone  
rings in the car.  
3. Press TITLE button #. “TITL” appears in the  
display and the display switches to the title  
input display.  
4. Press BAND button !.  
5. Press and hold ENT button @ for 2 seconds  
or longer to clear the title and cancel the title  
input mode.  
This function is not compatible with all cellular tele-  
phones. Contact your local authorized Clarion  
dealer for information on proper installation and  
compatibility.  
Message display  
Adjusting the way of title scrolling  
There are 3 ways for scrolling a title in the dis-  
play.You can select the way you prefer.  
When the unit is powered on or off, a message is  
displayed. The user can turn this message dis-  
play on or off.  
The factory default setting is “AUTO”.  
1. Press and hold ADJ button # for 1 second or  
longer to switch to the adjustment selection  
display.  
The factory default setting is “ON”.  
1. Press and hold ADJ button # for 1 second or  
longer to switch to the adjustment selection  
display.  
2. Press Right button ¥ or Left button % to se-  
2. Press Right button ¥ or Left button % to se-  
lect “SCROLL”.  
lect “MESSAGE”.  
3. Press Up button & or Down button * to  
change the display. Each time Up button &  
or Down button * is pressed, the display  
changes among the 2 display methods avail-  
able.  
3. Press Up button & to set the message dis-  
play to “ON”; press Down button * to set the  
message display to “OFF”.  
5. Press ADJ button # to return to the previous  
mode.  
4. Press ADJ button # to return to the previous  
mode.  
ADX5655z  
17  
280-7452-00  
7. OPERATIONS OF ACCESSORIES  
CD Changer Operations  
CD changer functions  
Selecting a CD  
When an optional CD changer is connected  
through the CeNET cable, this unit controls all  
the CD changer functions.This unit can control a  
total of 2 changers (MD and/or CD).  
Each of the Direct button 1 corresponds to a  
disc loaded into the magazine.  
Selecting a disc from 1 to 6  
Press the corresponding Direct button 1 (1 to  
Press FUNC button 7 and select the CD changer  
mode to start play. If 2 CD changers are  
connected, press FUNC button 7 to select the  
CD changer for play.  
6) to select the desired disc.  
Selecting a disc from 7 to 12 (only when a  
12 disc CD changer is used.)  
Press and hold the corresponding Direct button  
1 (7 to 12) for 1 second or longer to select the  
desired disc.  
If “NO MAGA” appears in the display, insert the  
magazine into the CD changer. “CHECK” appears  
in the display while the player loads (checks) the  
magazine.  
If “NO DISC” appears in the display, eject the  
magazine and insert discs into each slot. Then,  
reinsert the magazine back into the CD changer.  
If a CD is not loaded in a slot of the magazine,  
pressing the Direct button 1 corresponding to its  
disc number is invalid.  
Selecting a track  
Track-up  
CAUTION  
1. Press Right button ¥ to move ahead to the  
CD-ROM discs cannot be played in the CD  
changer.  
beginning of the next track.  
2. Each time you press Right button ¥, the track  
advances ahead to the beginning of the next  
track.  
Pausing play  
1. Press Play/pause button @ to pause play.  
Track-down  
PAUSE” appears in the display.  
1. Press Left button % to move back to the be-  
2. To resume play, press Play/pause button @  
ginning of the current track.  
again.  
2. Press Left button % twice to move to the be-  
ginning of the previous track.  
Displaying CD titles  
This unit can display title data for CD-text CDs  
and user titles input with this unit.  
Fast-forward/fast-backward  
Fast-forward  
Title data for CD-text CDs can be displayed with  
this unit only when it is connected to CDC655Tz.  
Press and hold Right button ¥ for 1 second or  
When connected to CDC655z or CDC1255z  
Press DISP button 3 to display the title.  
When connected to CDC655Tz  
longer.  
Fast-backward  
Press and hold Left button % for 1 second or  
1. Press DISP button 3 to display the title.  
longer.  
2. Each time you press and hold DISP button  
3 for 1 second or longer, the title display  
changes in the following order:  
User title (disc) CD-text title (disc) CD-  
text title (track) user title (disc)...  
Notes:  
• If the CD playing is not a CD-text CD or no user  
title has been input, “USER TTL” appears in the  
display.  
• If a CD-text CD is not input its disc title or a track  
title, “TEXTDTTL” or “TEXTTTTL” appears in the  
display.  
18  
ADX5655z  
280-7452-00  
CD Changer Operations  
Top function  
Repeat play  
The top function plays from the first track (track  
No. 1) of the disc.  
The repeat play continuously plays the current  
track.This function continues automatically until it  
is canceled.  
When playing a disc 1 to 6  
1. Press RPT button 6. “T-REPEAT” lights in  
Press the Direct button 1 (1 to 6) with the same  
number as the CD playing.  
the display and the current track is repeated.  
2. To cancel the repeat play, press RPT button  
6 again. “T-REPEAT” goes off from the dis-  
play and normal play resumes.  
When playing a disc 7 to 12 (only when a  
12 disc CD changer is used.)  
Press and hold for 1 second or longer the Direct  
button 1 (7 to 12) with the same number as the  
CD playing.  
Disc repeat play  
After all the tracks on the current disc have been  
played, the disc repeat play automatically replays  
the current disc over from the first track. This  
function continues automatically until it is  
canceled.  
If a CD is not loaded in a slot of the magazine,  
pressing the Direct button 1 corresponding to its  
disc number is invalid.  
Scan play  
1. Press and hold RPT button 6 for 1 second  
or longer.DISC indication 3 and “D-REPEAT”  
light in the display and the disc repeat play  
starts.  
The scan play locates and plays the first 10  
seconds of each track on a disc automatically.  
This function continues on the disc until it is  
canceled.  
The scan play is useful when you want to select a  
2. To cancel the disc repeat play, press and hold  
RPT button 6 again. DISC indication 3 and  
D-REPEAT” go off from the display and nor-  
mal play resumes on the current track.  
desired track.  
1. Press SCN button 5 to start track scanning.  
T-SCAN” lights in the display.  
2. To cancel the scan play, press SCN button 5  
again.T-SCAN” goes off from the display and  
the current track continues to play.  
Random play  
The random play selects and plays individual  
tracks on the disc in no particular order. This  
function continues automatically until it is  
canceled.  
Disc scan play  
The disc scan play locates and plays the first 10  
seconds of the first track on each disc in the  
currently selected CD changer. This function  
continues automatically until it is canceled.  
1. Press RDM button 8. “T-RANDOM” lights in  
the display and the random play begins.  
2. To cancel the random play, press RDM but-  
ton 8 again. “T-RANDOM” goes off from the  
display and normal play resumes.  
The disc scan play is useful when you want to  
select a desired CD.  
1. Press and hold SCN button 5 for 1 second  
or longer. DISC indication 3 and “D-SCAN”  
light in the display and the disc scan play  
starts.  
Disc random play  
The disc random play selects and plays individual  
tracks or discs automatically in no particular  
order.This function continues automatically until  
it is canceled.  
2. To cancel the disc scan play, press SCN but-  
ton 5 again. DISC indication 3 and “D-  
SCAN” go off from the display and the cur-  
rent track continues to play.  
1. Press and hold RDM button 8 for 1 second  
or longer. DISC indication  
3
and  
D-RANDOM” light in the display and the disc  
random play starts.  
2. To cancel the disc random play, press and hold  
RDM button 8 again. DISC indication 3 and  
D-RANDOM” go off from the display and nor-  
mal play resumes from the current track.  
ADX5655z  
19  
280-7452-00  
MD Changer Operations  
Track-down  
MD changer functions  
1. Press Left button % to move back to the be-  
When an optional MD changer is connected  
through the CeNET cable, this unit controls all  
the MD changer functions. This unit can control  
a total of 2 changers (MD and/or CD).  
ginning of the current track.  
2. Press Left button % twice to move to the be-  
ginning of the previous track.  
Press FUNC button 7 and select the MD changer  
mode to start play. If 2 MD changers are con-  
nected, press FUNC button 7 to select the MD  
changer for play.  
Fast-forward/fast-backward  
Fast-forward  
Press and hold Right button ¥ for 1 second or  
longer.  
If “NO DISC” appears in the display, load MDs into  
the MD changer.  
Fast-backward  
Press and hold Left button % for 1 second or  
longer.  
Pausing play  
1. Press Play/pause button @ to pause play.  
PAUSE” appears in the display.  
Top function  
2. To resume play, press Play/pause button @  
The top function plays from the first track (track  
No. 1) of the disc. Press the Direct button 1 (1  
to 6) with the same number as the MD playing.  
again.  
Switching disc titles and track titles  
This unit can display disc titles and track titles  
already entered on MDs.  
If an MD is not loaded in a slot of the MD changer,  
pressing the Direct button 1 corresponding to its  
disc number is invalid.  
Titles cannot be entered for MDs with this unit.  
1. Press DISP button 3 to display the title. The  
disc title or track title is displayed.  
Scan play  
The scan play locates and plays the first 10 sec-  
onds of each track on a disc automatically. This  
function continues on the disc until it is canceled.  
2. Each time you press and hold DISP button  
3 for 1 second or longer, the display toggles  
between the disc title and the track title.  
The scan play is useful when you want to select a  
desired track.  
Note:  
• If an MD is not input its disc title or a track title,  
D TITLE” or “T TITLE” appears in the display.  
1. Press SCN button 5 to start track scanning.  
T-SCAN” lights in the display.  
2. To cancel the scan play, press SCN button 5  
again.T-SCAN” goes off from the display and  
the current track continues to play.  
Selecting an MD  
Each of the Direct button 1 corresponds to an  
MD loaded into the MD changer. Press the  
corresponding Direct button 1 (1 to 6) to select  
the desired disc.  
Disc scan play  
The disc scan play locates and plays the first 10  
seconds of the first track on each disc in the  
currently selected MD changer. This function  
continues automatically until it is canceled.  
If an MD is not loaded in a slot of the MD changer,  
pressing the Direct button 1 corresponding to its  
disc number is invalid.  
The disc scan play is useful when you want to se-  
Selecting a track  
Track-up  
lect a desired MD.  
1. Press and hold SCN button 5 for 1 second  
or longer. DISC indication 3 and “D-SCAN”  
light in the display and the disc scan play  
starts.  
1. Press Right button ¥ to move ahead to the  
beginning of the next track.  
2. Each time you press Right button ¥, the track  
advances ahead to the beginning of the next  
track.  
2. To cancel the disc scan play, press and hold  
SCN button 5 again. DISC indication 3 and  
D-SCAN” go off from the display and the cur-  
rent track continues to play.  
20  
ADX5655z  
280-7452-00  
MD Changer Operations  
Repeat play  
TV Operations  
TV tuner functions  
The repeat play continuously plays the current  
track. This function continues automatically until  
it is canceled.  
When an optional TV tuner is connected through  
the CeNET cable, this unit controls all TV tuner  
functions. To watch TV requires a TV tuner and  
monitor.  
1. Press RPT button 6. “T-REPEAT” lights in  
the display and the current track is repeated.  
Watching a TV  
1. Press FUNC button 7 and select the TV  
2. To cancel the repeat play, press RPT button  
6 again. “T-REPEAT” goes off from the dis-  
play and normal play resumes.  
mode.  
2. Press BAND button ! to select the desired  
TV band (TV1 or TV2). Each time the button  
is pressed, the input selection toggles  
between TV1 and TV2.  
Disc repeat play  
After all the tracks on the current disc have been  
played, the disc repeat play automatically replays  
the current disc over from the first track. This  
function continues automatically until it is  
canceled.  
3. Press Right button ¥ or Left button % to tune  
in the desired TV station.  
1. Press and hold RPT button 6 for 1 second  
or longer.DISC indication 3 and “D-REPEAT”  
light in the display and the disc repeat play  
starts.  
Watching a video  
The TV tuner has a VTR input terminal to which  
1 external device can be connected. Connect a  
12V video cassette player (VCP) or video  
cassette recorder (VCR) to the TV tuner input  
terminal.  
2. To cancel the disc repeat play, press and hold  
RPT button 6 again. DISC indication 3 and  
D-REPEAT” go off from the display and nor-  
mal play resumes on the current track.  
1. Press RDM button 8 to select VTR.  
2. To return to the TV broadcast, press RDM  
button 8.  
Random play  
The random play selects and plays individual  
tracks on the disc in no particular order. This  
function continues automatically until it is  
canceled.  
Tuning  
There are 3 types of tuning mode available, seek  
tuning, manual tuning and preset tuning.  
1. Press RDM button 8. “T-RANDOM” lights in  
Seek tuning  
1. Press BAND button ! and select the desired  
the display and the random play begins.  
2. To cancel the random play, press RDM but-  
ton 8 again. “T-RANDOM” goes off from the  
display and normal play resumes.  
TV band (TV1 or TV2).  
If “MANU” is lit in the display, press and hold  
BAND button ! for 1 second or longer.MANU”  
in the display goes off and seek tuning is now  
available.  
Disc random play  
2. Press Right button ¥ or Left button % to au-  
The disc random play selects and plays individual  
tracks or discs automatically in no particular  
order.This function continues automatically until  
it is canceled.  
tomatically seek to the next station.  
Press Right button ¥ to automatically tune  
up the frequency band to the next available  
TV station; press Left button % to automati-  
cally tune down.  
1. Press and hold RDM button 8 for 1 second  
or longer. DISC indication  
3
and  
D-RANDOM” light in the display and the disc  
random play starts.  
2. To cancel the disc random play, press and hold  
RDM button 8 again. DISC indication 3 and  
D-RANDOM” go off from the display and nor-  
mal play resumes from the current track.  
ADX5655z  
21  
280-7452-00  
TV Operations  
Manual tuning  
Auto store  
There are 2 ways available:Quick tuning and step  
tuning.  
Auto store selects 6TV stations automatically and  
stores each one into a preset memory.  
When you are in the step tuning mode, the  
frequency changes one step at a time. In quick  
tuning mode, you can quickly tune the desired  
frequency.  
If there are not 6 stations with good reception,  
stations previously stored in memory remain and  
only the strong stations are stored into memory.  
1. Press BAND button ! and select the desired  
1. Press BAND button ! and select the desired  
TV band (TV1 or TV2).  
band (TV1 or TV2).  
2. Press and hold AS button 5 for 2 seconds or  
longer. The stations with good reception are  
automatically stored to the Preset buttons 1.  
If “MANU” is not lit in the display, press and  
hold BAND button ! for 1 second or longer.  
MANU” lights in the display and manual tuning  
is now available.  
Preset scan  
2. Tune into a station.  
Preset scan allows the user to view each preset  
position before it automatically advances to the  
next preset. This function is useful for searching  
for a desired TV station in memory.  
Quick tuning:  
Press and hold Right button ¥ or Left button  
% for 1 second or longer to quickly tune up  
and down to a desired station.  
1. Press PS button 5.  
Step tuning:  
2. When a desired station is found, press PS  
button 5 again to remain tuned to that sta-  
tion.  
Press Right button ¥ or Left button % to  
manually tune to a station, one channel at a  
time.  
Note:  
• Do not press and hold PS button 5 for 2 seconds  
or longer. Doing so will trigger the auto store  
function and start storing stations into memory.  
Recalling a preset station  
A total of 12 TV stations can be stored (6-TV1  
and 6-TV2).This allows you to select your favorite  
TV stations and store them in memory for later  
recall.  
Setting the receiver for Diversity  
tuning  
You can change the reception setting for the TV  
antenna connected to the TV tuner.  
1. Press BAND button ! and select the desired  
TV band (TV1 or TV2).  
The factory default setting is “ON”.  
1. Press and hold ADJ button # for 1 second or  
longer to switch to the adjustment selection  
display.  
2. To recall a storedTV station, press the desired  
Preset button 1 to select that station.  
Press and hold one of the Preset buttons 1  
for 2 seconds or longer to store the current sta-  
tion into the preset memory.  
2. Press Right button ¥ or Left button % to se-  
lect “TV DIVER”.  
Manual memory  
3. Press Up button & to set to “ON” or Down  
1. Select the desired station with seek tuning,  
manual tuning or preset tuning.  
button * to set to “OFF”.  
ON:  
2. Press and hold one of the Preset buttons 1  
for 2 seconds or longer to store the current  
station to that preset memory.  
In the “ON” position, the TV tuner emphasizes  
the visual signal by choosing the antenna with  
the best signal strength. This requires more  
than one antenna on the vehicle.  
OFF:  
Set the TV Diver adjustment to the “OFF” po-  
sition when only using one antenna on the  
vehicle.  
4. Press ADJ button # to return to the previous  
mode.  
22  
ADX5655z  
280-7452-00  
8. TROUBLESHOOTING  
Problem  
Cause  
Measure  
Power does not  
turn on.  
Fuse is blown.  
Replace with a fuse of the same amperage. If the  
fuse blows again, consult your store of purchase.  
(No sound is  
produced.)  
Incorrect wiring.  
Consult your store of purchase.  
No sound output  
when operating  
the unit with  
amplifiers or  
power antenna  
attached.  
Power antenna lead is  
shorted to ground or  
excessive current is required  
for remote-on the amplifiers  
or power antenna.  
1. Turn the unit off.  
2. Remove all wires attached to the power antenna  
lead. Check each wire for a possible short to  
ground using an ohm meter.  
3. Turn the unit back on.  
4. Reconnect each amplifier remote wire to the  
power antenna lead one by one. If the amplifiers  
turn off before all wires are attached, use an  
external relay to provide remote-on voltage  
(excessive current required).  
Nothing happens The microprocessor has  
when buttons are malfunctioned due to noise,  
Press the reset button with a thin rod.  
pressed.  
etc.  
Reset button  
Display is not  
accurate.  
Sound quality is  
poor.  
Playback head is dirty.  
Use a cleaning tape, etc., to clean the head.  
B NR button 8 is not  
When listening to a tape recorded with Dolby NR,  
pressed.  
press B NR button 8 and select B NR.  
CD cannot be  
loaded.  
Another CD is already  
loaded.  
Eject the CD before loading the new one.  
Sound skips or is CD is dirty.  
noisy.  
Clean the CD with a soft cloth.  
CD is heavily scratched or  
warped.  
Replace with a CD with no scratches or no warped.  
Sound is bad  
directly after  
power is turned  
on.  
Water droplets may form on Let it dry for about 1 hour with the power on.  
the internal lens when the  
car is parked in a humid  
place.  
ADX5655z  
23  
280-7452-00  
9. ERROR DISPLAYS  
If an error occurs, one of the following displays is displayed.  
Take the measures described below to eliminate the problem.  
Error Display  
ERROR 2  
Cause  
Measure  
A CD is caught inside the CD deck and is  
not ejected.  
This is a failure of CD deck’s mechanism  
and consult your store of purchase.  
ERROR 3  
ERROR 1  
A CD cannot be played due to scratches,  
etc.  
Replace with a non-scratched, non-warped  
disc.  
Tape cannot be played due to defective  
tape such as cut tape.  
Eject the tape then replace it with a new  
one.  
ERROR 2  
ERROR 4  
Tape is caught and cannot be played.  
Tape mode cannot be detected.  
Remove the caught or wound tape.  
This is a failure of tape mechanism and  
consult your store of purchase.  
ERROR 8  
ERROR 2  
ERROR 3  
ERROR 6  
ERROR H  
Tape is caught and cannot be ejected.  
Eliminate the reason for which the tape is  
caught.  
A CD inside the CD changer is not loaded. This is a failure of CD changer’s mecha-  
nism and consult your store of purchase.  
A CD inside the CD changer cannot be  
played due to scratches, etc.  
Replace with a non-scratched, non-warped  
disc.  
A CD inside the CD changer cannot be  
played because it is loaded upside-down.  
Eject the disc then reload it properly.  
Displayed when the temperature in the MD Lower the surrounding temperature and  
changer is too high and playback has been wait for a while to cool off MD changer.  
stopped automatically.  
ERROR 2  
ERROR 3  
ERROR 6  
An MD inside the MD changer is not  
loaded.  
This is a failure of MD changer’s mecha-  
nism and consult your store of purchase.  
An MD inside the MD changer cannot be  
played due to scratches, etc.  
Replace with a non-scratched, non-warped  
disc.  
Displayed when a non-recorded MD is  
loaded in the MD changer.  
Load a pre-recorded MD in the MD  
changer.  
If an error display other than the ones described above appears, press the reset button. If the problem  
persists, turn off the power and consult your store of purchase.  
24  
ADX5655z  
280-7452-00  
10. SPECIFICATIONS  
FM Tuner  
Audio  
Frequency Range:  
Maximum Power Output:  
87.9 MHz to 107.9 MHz  
180 W (45 W × 4 ch) (EIAJ)  
Usable Sensitivity:  
11 dBf  
Continuous Average Power Output:  
16 W × 4, into 4 , 20 Hz to 20 kHz, 1%THD  
50dB Quieting Sensitivity:  
17 dBf  
Bass Control Action (30 Hz):  
±13 dB  
Alternate Channel Selectivity:  
75 dB  
Treble Control Action (10 kHz):  
±10 dB  
Stereo Separation (1 kHz):  
35 dB  
Line Output Level (CD 1kHz):  
1.8 V  
Frequency Response (±3 dB):  
30 Hz to 15 kHz  
General  
Power Supply Voltage:  
AM Tuner  
Frequency Range:  
14.4 V DC (10.8 to 15.6 V allowable),  
negative ground  
530 kHz to 1710 kHz  
Current Consumption:  
Less than 15 A  
Usable Sensitivity:  
25 µV  
Speaker Impedance:  
4 (4 to 8 allowable)  
CD Player  
Frequency Response (±1 dB):  
10 Hz to 20 kHz  
Weight / Source unit:  
5.7 lb. (2.6 kg)  
Weight / Remote control unit:  
1 oz. (30 g) (including battery)  
Signal to Noise Ratio (1 kHz):  
100 dB  
Dimensions / Source unit:  
7" (Width) × 3-15/16" (Height) × 6-1/8" (Depth)  
[178 (W) × 100 (H) × 155 (D) mm]  
Dynamic Range (1 kHz):  
95 dB  
Dimensions / Remote control unit:  
1-3/4" (Width) × 4-5/16" (Height) × 1-1/8" (Depth)  
[44 (W) × 110 (H) × 27 (D) mm]  
Harmonic Distortion:  
0.01%  
Tape Deck  
Wow & Flutter (WRMS):  
0.06 %  
Channel Separation (1 kHz):  
45 dB  
Frequency Response (±3 dB)  
120µs (normal): 30 Hz to 18 kHz  
70µs (CrO2 FeCr, Metal): 30 Hz to 20 kHz  
,
Signal to Noise Ratio  
70µs (CrO2 FeCr, Metal): 58 dB  
,
Dolby B NR: 67dB  
Notes:  
Specifications comply with EIA Standards.  
Specifications and design are subject to change without notice for further improvement.  
ADX5655z  
25  
280-7452-00  

Advent TOCLS OE100 User Manual
Braun MR 500 HC User Manual
Bunn Beverage Dispenser DV User Manual
Canon HFR16 User Manual
Casio fx 3650P User Manual
Cuisinart SMARTPOWER CLASSIC IB 5916ATX User Manual
Hanns G Car Video System HZ251 User Manual
Huey Chiao HCB10 User Manual
JVC CAMESCOPE COMPACT VHS GR FX17 User Manual
JVC Car Stereo System KD R301 User Manual