Clarion MAX667VD User Manual

Owner’s manual & Installation manual  
DVD MULTIMEDIA STATION WITH  
TOUCH PANEL CONTROL  
1. FEATURES  
Double Din Motorized 7" Widescreen LCD  
CD-R/CD-RW/DVD-R/DVD-RW Compatible  
Touch Panel Control  
DVD Video/CD-DA/MP3/WMA/Video CD  
Play Capability  
RCA 6(+2)-Channel (2-zone) Output  
Built-in 50 W × 4 Amplifier  
5.1 Channel Decoder for DTS and Dolby  
Digital Ready  
Optical Digital Output  
2-ZONE Control  
iPod® Control  
CeNET with Balanced Audio Line  
Transmission and Dynamic Noise  
Canceling  
iPod” is a trademark of Apple Computer, Inc.,  
registered in the U.S. and other countries.  
Expanding Systems  
Expanding audio features  
Expanding visual features  
CCD Camera  
TV Tuner  
CeNET CD Changer  
CeNET DVD Changer  
VTR etc.  
iPod  
MAX667VD  
Note:  
The items listed outside of the  
frames are the commercial  
products generally sold.  
Rear monitor  
4-Channel Amplifier  
Wireless  
Headphone  
5.1 ch Surround  
Decoder  
Expanding features for the rear seats  
Expanding sound features  
3
MAX667VD  
2. PRECAUTIONS  
WARNING  
For your safety, the driver should not watch the DVD video/TV/VTR or operate the controls  
while driving. Please note that watching and operating the DVD video/TV/VTR while driving are  
prohibited by law in some countries. Also, while driving, keep the volume to a level at which  
external sounds can be heard.  
1. When the inside of the car is very cold and the  
INFORMATION FOR USERS:.  
player is used soon after switching on the  
heater, moisture may form on the disc (DVD/  
CD) or the optical parts of the player and  
proper playback may not be possible. If  
moisture forms on the disc (DVD/CD), wipe it  
off with a soft cloth. If moisture forms on the  
optical parts of the player, do not use the  
player for about one hour. The condensation  
will disappear naturally allowing normal  
operation.  
CHANGES OR MODIFICATIONS TO THIS  
PRODUCT NOT APPROVED BY THE  
MANUFACTURER WILL VOID THE  
WARRANTY.  
2. Driving on extremely bumpy roads which  
cause severe vibration may cause the sound  
to skip.  
3. This unit uses a precision mechanism. Even  
in the event that trouble arises, never open  
the case, disassemble the unit, or lubricate  
the rotating parts.  
4. TV broadcast reception (when the optional TV  
tuner is connected)  
When receiving the TV broadcast, the  
strength of the signals changes since the car  
is moving, so in some cases it may not be  
possible to receive clear pictures.  
• TV signals are strongly linear, so reception  
is affected by buildings, mountains and  
other obstacles.  
• Such external factors such as electric train  
lines, a high voltage lines, and signal  
devices may disturb the picture or cause  
noise.  
* If the reception is poor, switch to a station with  
good reception.  
4
MAX667VD  
3. CONTROLS /  
/
/
/
Operation panel /  
/
/
/
[&] (  
)
POWER  
[7]  
(
)
OPEN/CLOSE  
Sensor /  
/
/
/
[
]
]
ISR  
[
ADJ  
Blink LED /  
/
/
[
]
iPod  
/
[
]
SRC  
[
]
BAND  
[
]
[
]
CONT.  
MENU  
When the operation panel open /  
/
/
/
[
]
RESET  
5
MAX667VD  
4. NOMENCLATURE  
Names of Buttons  
Note:  
• Press this button to mute the sound in the  
TUNER/TV/VISUAL modes.  
Be sure to read this chapter while referring to the  
front diagrams for chapter “3.CONTROLS” on  
page 5 (unfold).  
[R], [F] buttons  
Use these buttons to change to the previous/next  
preset station in the TUNER/TV modes.  
Use these buttons to select a track in the CD,  
Video CD, MP3/WMA, iPod and CD changer  
modes.  
[&] (POWER) button  
• Press this button to turn on the power. Keep  
pressing this button more than 1 second to turn  
off the power.  
• Press this button to turn off the back light of the  
liquid crystal panel.  
• Use these buttons to select a chapter in the  
DVD video and DVD changer modes.  
[7] (OPEN/CLOSE) button  
[BAND] button  
• Use this button to open/close the operation  
panel.  
• Press this button to switch the receiving bands  
for TUNER/TV modes. Keep pressing this  
button more than 1 second to switch the Seek/  
Manual tuning modes.  
• Keep pressing this button more than 2 seconds  
to adjust the angle of the operation panel.  
The angle of the operation panel is adjustable  
in the range of 0° to 30°.  
• Use this button to move to the first track in the  
CD, Video CD and iPod modes, or the first  
chapter in the DVD video mode.  
• Use this button to move to the next folder in the  
MP3/WMA mode.  
• Use this button to switch to the next disc in the  
changer modes.  
• Keep pressing this button more than 1 second  
to play all tracks in the iPod mode.  
Sensor  
• Receiver for the remote control unit (operating  
range: 30° in all directions).  
[ISR] button  
• Use this button to enter/exit the ISR (Instant  
Station Recall) standby mode.  
• Keep pressing this button more than 2 seconds  
to store the current station into ISR memory in  
the radio mode.  
[MENU] button  
• Press this button to show the menu screen of  
DVD video/Video CD. Keep pressing this  
button more than 1 second to show the top  
menu screen of DVD video.  
* The [ISR] button is disabled when the SUB  
zone is selected in the 2-ZONE mode.  
[ADJ] button  
[CONT.] button  
• Press this button to enter/exit the ADJUST  
mode to change the settings.  
• Press this button to show/hide the key pad on  
the menu screen of DVD video/Video CD.  
• Keep pressing this button more than 1 second  
switches the display to a Visual input screen to  
lock the monitor (To enable this function, go to  
the GENERAL menu (within the ADJUST  
menu), and set the CONNECT item to “NAVI”  
or “OTHER”).  
When displaying the GENERAL menu screen in  
the ADJUST mode, keep pressing this button more  
than 2 seconds to display a screen for entering  
your personal code of the anti-theft function.  
[SRC] button  
• Press this button to display the Source menu  
screen to switch the mode.  
Blink LED  
When the BLINK LED function is set to “ON”  
from the GENERAL menu in the ADJUST  
[+], [–] buttons  
mode, blinks when the ACC power is turned off.  
Use these buttons to increase/decrease the volume.  
[p] button  
[iPod] button  
Press this button to enter the play pause mode in  
the DVD PLAYER/iPod/changer modes. Press  
the button again to resume playback.  
• Press this button to switch to the iPod mode.  
[o] (EJECT) button  
• Use this button to eject the disc set in this unit.  
• When a disc is set in this unit, the illumination  
of this button lights.  
• Keep pressing this button more than 1 second  
to mute the sound in the DVD PLAYER/iPod/  
changer modes.  
6
MAX667VD  
5. OUTLINE OF BUTTON AND  
TOUCHKEY OPERATION  
Turning the power on  
Engine ON  
position  
1  
&
(POWER)  
System check  
The CeNET format utilized on this unit is  
provided with a system check function. When  
the system check function is performed  
under the following conditions, the power is  
automatically turned off. Press the [&]  
(POWER) button again.  
•When power is first turned on after initial  
installation.  
or  
•When an external device is connected or  
disconnected.  
2  
•When the [RESET] button is pressed.  
In addition to the above conditions, the  
system check function can be performed  
from the GENERAL menu in the ADJUST  
mode.  
You can change the media  
sources.  
7
MAX667VD  
TUNER mode operation  
(Source menu)  
3  
(Key Pad screen)  
4  
(Preset List screen)  
Enters desired  
frequency.  
1
0
7
9
0
ENT  
5  
Selects desired  
station.  
(Title input screen)  
Note:  
1:The operation button is [ & ](POWER) button  
in the description of operation per mode.  
2:External equipment not connected with  
CeNET is not displayed.  
3:When the TUNER mode is currently selected,  
touch [Back] key.  
4:The operation key is [Search] key in the  
description of operation per mode.  
5:This shows an example entering 107.90 MHz.  
8
MAX667VD  
DVD Video mode operation  
6  
(DVD PLAYER mode screen)  
(Source menu)  
Screen during DVD mode  
when automobile moving.  
(Option menu)  
(DVD SETUP menu)  
Note:  
6:When displaying movies in DVD video mode, touching the screen surface will cause  
the DVD PLAYER mode screen to be displayed.  
9
MAX667VD  
Adjusting audio feature settings  
(From any screen)  
When a 5.1 ch Surround  
Decoder is connected  
(ADJUST mode menu)  
(AUDIO menu)  
(AUDIO EXT. menu)  
(BAL/FAD)  
(BAL/FAD screen)  
10  
MAX667VD  
(AUDIO menu)  
(AUDIO EXT. menu)  
(STATUS)  
(SPEAKER SEL)  
(STATUS screen)  
(SPEAKER SEL menu)  
11  
MAX667VD  
Adjusting the other system settings  
(From any screen)  
(ADJUST mode menu)  
(GENERAL menu)  
(MONITOR menu)  
(CLOCK)  
(CLOCK screen)  
(MONI ADJ)  
(Monitor Adjust screen)  
(Hour, Minute, a.m./p.m.)  
Bright  
Color  
Hue  
Dimmer  
Switched by touching this key repeatedly.  
(“Hue” is not displayed when displaying  
PAL images.)  
12  
MAX667VD  
6. REMOTE CONTROL  
Remote control unit  
Signal transmitter  
Operating range: 30˚ in all directions  
[
]
]
BAND  
[
[
]
MUTE  
[
]
SRC  
VOLUME  
[
]
[
]
P.TIME  
0-9  
[
]
]
]
DISC SEL  
[
],[  
[
[
]
]
SEARCH MODE  
[
MENU  
RTN  
[
]
TOP MENU  
[
]
]
SET UP  
[
],[  
]
[
ENT  
[
[
]
ISR  
[
[
]
2-ZONE  
]
[
]
PBC  
SCN  
]
[
]
RDM  
RPT  
[
]
]
[
[
]
AUDIO  
SLOW  
]
[
ANGLE  
SUB TITLE  
Inserting the Batteries  
1. Slide the rear cover in the direction of the  
arrow, and remove it.  
2. Insert the AA (SUM-3, IECR-6/1.5V) batteries  
bundled with the remote control unit in the  
directions shown in the figure, then close the  
rear cover.  
AA (SUM-3, IECR-6/1.5V)  
Batteries  
Note:  
Using batteries improperly can cause them to  
explode. Take note of the following points:  
When replacing batteries, replace both batteries  
with new ones.  
Rear cover  
Do not short-circuit, disassemble or heat batteries.  
Do not dispose of batteries into fire or flames.  
Dispose of spent batteries properly.  
Rear side  
13  
MAX667VD  
Functions of Remote Control Unit Buttons  
You can use the remote control unit to control the MAX667VD. When the 2-ZONE function is ON, the  
controls work upon the selected zone.  
[SCN] button  
Shared modes  
• Press to perform preset scans in the TUNER  
and TV modes.  
[SRC] button  
• Press this button to turn on the power. Keep  
pressing this button more than 1 second to turn  
off the power.  
• Keep pressing more than 1 second to perform  
the auto store operation in the TUNER and TV  
modes.  
• Press this button to switch the modes such as  
TUNER mode, DVD PLAYER mode.  
[ISR] button  
• Recall ISR radio station in memory.  
• Keep pressing more than 2 seconds to store  
current station into ISR memory (radio mode  
only).  
[VOLUME] buttons  
• Increases and decreases volume.  
[MUTE] button  
• Turns mute on and off.  
[RDM] button  
• Press to switch between TV mode and VTR  
mode.  
[RTN] button  
• Returns to the previous screen from the list or  
menu screens.  
• Displays the menu screen when playing a  
Video CD.  
DVD PLAYER mode  
[BAND] button  
• Press to return to the first chapter in DVD video  
mode.  
• Press to return to the first track in CD and Video  
CD modes when playing back.  
• Press to move to the next folder when more  
than 1 folder are played back in MP3/WMA  
mode.  
[2-ZONE] button  
• Keep pressing more than 1 second to turn on  
the 2-ZONE, and keep pressing again to turn  
off 2-ZONE.  
• Press to switch between the MAIN zone and  
SUB zone when the 2-ZONE is turned on.  
TUNER/TV mode  
[P.TIME] button  
• Press to turn on and off the playtime display in  
the DVD video/Video CD modes.  
[BAND] button  
• Switches reception band.  
• Keep pressing more than 1 second to switch  
the Seek/Manual tuning modes.  
[6] button  
• Press to play or pause video and audio media.  
• Keep pressing more than 1 second to stop  
video playback in DVD video.  
[0 - 9] button (TUNER mode only)  
• Use in the Key Pad screen to set the radio  
frequency.  
• Use to select the preset number in the Preset  
List screen.  
[0 - 9] buttons  
• Press to enter DVD video chapters/titles in the  
Key Pad screen.  
• Press to set the track/folder number of the CD,  
Video CD or MP3/WMA in the Key Pad screen.  
[DISC SEL] button  
• Press to show/hide the Preset List screen.  
[DISC SEL] button  
• Press to show/hide the Track List screen in the  
CD mode.  
[SEARCH MODE] button (TUNER mode only)  
• Press to show/hide the Key Pad screen.  
• Press to show/hide the Folder List screen in the  
MP3/WMA mode.  
[ENT] button  
• Press to fix the entered data in the Key Pad  
screen.  
[r], [f] buttons  
• Press to select the next higher or lower preset  
station in TUNER and TV modes.  
14  
MAX667VD  
Functions of Remote Control Unit Buttons  
[SEARCH MODE] button  
[RDM] button  
• Press to display the Key Pad operation screen.  
• Keep pressing more than 1 second to switch  
the search mode.  
• Press to play tracks at random in CD and MP3/  
WMA modes.  
• Keep pressing more than 1 second to play  
folders at random in MP3/WMA mode.  
[RTN] button  
[PBC] button  
• Press to turn on and off the PBC function in the  
Video CD mode.  
• Press to switch to the menu screen while a  
Video CD is being played back. Press to switch  
to the previous screen display while the Menu  
screen is being displayed. However, it may  
occur that this button operation dose not work  
on some discs.  
[AUDIO] button  
• Press to switch the AUDIO function in the DVD  
video/Video CD modes.  
[MENU] button  
• Press to display menu stored on video disc.  
[SUB TITLE] button  
• Press to display subtitles in the DVD video  
mode.  
[SET UP] button  
• Press to show the DVD SETUP menu screen  
during DVD video playback.  
[ANGLE] button  
• Press to switch the ANGLE function in the DVD  
video mode when the Angle mark is displayed.  
(This button is available only on multiple angles  
DVDs and when the ANGLE function in the  
SET UP menu is set to ON.)  
[TOP MENU] button  
• Press to display the Top Menu screen stored  
on DVD video disc. Some discs do not display  
the top menu screen.  
[E], [e], [T], [t] buttons  
• Press to select button items on the menu  
screen of a DVD video.  
[SLOW] button  
• Press to perform slow playback in the DVD  
video/Video CD modes.  
• Press [E], [e] to scroll the Track/Folder List  
screen in the CD and MP3/WMA modes.  
iPod mode  
[ENT] button  
[BAND] button  
• Press to fix the entered data in the Key Pad  
• Press to return to the first track in the current  
play list.  
screen.  
• Press to fix the selected item in the menu  
screens.  
• Keep pressing more than 1 second to change  
to the All play mode. All tracks in the Song list  
will be played back.  
[r], [f] buttons  
• Press to select the next higher or lower chapter  
number in DVD video mode.  
• Press to select the next higher or lower track in  
CD, Video CD and MP3/WMA modes.  
• Keep pressing to perform fast-forward and fast-  
backward.  
• Keep pressing to perform slow playback while  
pausing a DVD video/Video CD play.  
[6] button  
• Press to play or pause the selected media.  
[E], [e] buttons  
• Press to scroll the list screens.  
[r], [f] buttons  
• Press to select the next higher or lower track  
numbers.  
• Keep pressing to perform fast-forward or fast-  
backward.  
[SCN] button  
• Press to perform chapter scans in the DVD  
video mode, and track scans in CD and MP3/  
WMA modes.  
CD changer mode  
• Keep pressing more than 1 second to perform  
folder scans in MP3/WMA mode.  
[BAND] button  
• Press to switch discs.  
[RPT] button  
[DISC SEL] button  
• Press to show/hide the Disc List screen.  
• Press to perform chapter repeat in the DVD  
video mode, and track repeat in CD and MP3/  
WMA modes.  
[6] button  
• Press to play and pause the selected media.  
• Keep pressing more than 1 second to perform  
folder repeat in MP3/WMA mode.  
15  
MAX667VD  
Functions of Remote Control Unit Buttons  
[0 - 9] buttons  
• Press to enter track numbers in the Key Pad  
[RPT] button  
• Press to perform track repeat.  
screen.  
• Keep pressing more than 1 second to perform  
disc repeat.  
• Other button operations in this mode are the  
same as those in DVD PLAYER mode.  
• Press to select the disc number in the Disc List  
screen.  
[E], [e] buttons  
• Press to scroll the Disc/Track List screen.  
When SUB zone is selected  
SUB zone operations are supported, but button  
functions are limited as follows:  
[r], [f] buttons  
• Press to select the next higher or lower track  
numbers.  
• Keep pressing to perform fast-forward or fast-  
backward.  
Shared modes  
[VOLUME] buttons  
[SCN] button  
• Controls sound volume for MAIN zone source.  
• Press to perform track scan.  
• Keep pressing more than 1 second to perform  
disc scan.  
[MUTE] button  
• Controls audio mute function for MAIN zone  
source.  
[RPT] button  
• Press to perform track repeat.  
• Keep pressing more than 1 second to perform  
disc repeat.  
[ISR] button  
Not supported.  
[RDM] button  
CD changer mode  
• This mode is disabled when MAIN zone is set  
to an external equipment other than the CD  
changer.  
• Press to play tracks of all discs at random.  
• Keep pressing more than 1 second to play  
folders of all discs at random.  
DVD changer mode  
DVD changer mode  
• This mode is disabled when MAIN zone is set  
to an external equipment other than the DVD  
changer.  
[BAND] button  
• Press to switch discs.  
[P.TIME] button  
• Keep pressing more than 1 second to switch  
between the time progress and remaining time  
to be displayed.  
[DISC SEL] button  
• Press to show/hide the Disc List screen.  
[0 - 9] buttons  
• Press to enter track numbers in the Key Pad  
screen.  
• Press to select the disc number in the Disc List  
screen.  
[E], [e], [T], [t] buttons  
• Press to scroll the Disc/Track List screen.  
[SCN] button  
• Press to perform track scan.  
• Keep pressing more than 1 second to perform  
disc scan.  
16  
MAX667VD  
7. CAUTIONS ON HANDLING  
Operation panel/Generalities  
For a longer service life, be sure to read the following cautions.  
• The operation panel will operate properly in a  
temperature range of 0 to 60°C.  
• Do not allow any liquids on the set from drinks,  
umbrellas etc. Doing so may damage the  
internal circuitry.  
• Do not disassemble or modify the set in any  
way. Doing so may result in damage.  
• Subjecting the operation panel to shocks may  
result in breakage, deformation or other  
damage.  
• Do not let cigarettes burn the display. Doing so  
may damage or deform the cabinet.  
• If a problem should occur, have the set  
inspected at your store of purchase.  
• Do not insert objects or poke in the space  
between the operation panel and the main unit  
when the panel is tilted.  
• The remote control unit may not work if the  
remote control sensor is exposed to direct  
sunlight.  
• In extremely cold weather, the display  
movement may slow down and the display may  
darken, but this is not a malfunction. The  
display will work normally when the  
temperature increases.  
• Small black and shiny spots inside the liquid  
crystal panel are normal for LCD products.  
• The touchkeys on the display operate when  
slightly touched. Do not press the touchkey  
screen with much force.  
• Do not push the case surrounding the touchkey  
panel with much force. This may cause  
malfunctioning of the touchkeys.  
Cleaning  
Cleaning the cabinet  
Use a soft, dry cloth and gently wipe off the dirt.  
For tough dirt, apply some neutral detergent  
diluted in water to a soft cloth, wipe off the dirt  
gently, then wipe again with a dry cloth.  
Do not use benzene, thinner, car cleaner, etc.,  
as these substances may damage the cabinet  
or cause the paint to peel. Also, leaving rubber  
or plastic products in contact with the cabinet  
for long periods of time may cause stains.  
Cleaning the liquid crystal panel  
The liquid crystal panel tends to collect dust, so  
wipe it off occasionally with a soft cloth. The  
surface is easily scratched, so do not rub it with  
hard objects.  
17  
MAX667VD  
Handling Discs  
Handling  
Storage  
• New discs may have some roughness around  
the edges. If such discs are used, the player  
may not work or the sound may skip. Use a  
ball-point pen or the like to remove any  
roughness from the edge of the disc.  
• Do not expose discs to direct sunlight or any  
heat source.  
• Do not expose discs to excess humidity or  
dust.  
• Do not expose discs to direct heat from  
heaters.  
Ball-point pen  
Cleaning  
Roughness  
• To remove fingermarks and dust, use a soft  
cloth and wipe in a straight line from the center  
of the disc to the circumference.  
• Do not use any solvents, such as commercially  
available cleaners, anti-static spray, or thinner  
to clean discs.  
• After using special disc cleaner, let the disc dry  
off well before playing it.  
• Never stick labels on the surface of the disc or  
mark the surface with a pencil or pen.  
• Never play a disc with any cellophane tape or  
other glue on it or with peeling off marks. If you  
try to play such a disc, you may not be able to  
get it back out of the DVD player or it may  
damage the DVD player.  
• Do not use discs that have large scratches, are  
misshapen, cracked, etc. Use of such discs  
may cause misoperation or damage.  
On Discs  
• Exercise a good precaution when loading a  
disc. The operation panel will close  
automatically when leaving it open for a while.  
• Never turn off the power and remove the unit  
from the car with a disc loaded.  
Caution  
• To remove a disc from its storage case, press  
down on the center of the case and lift the disc  
out, holding it carefully by the edges.  
• Do not use commercially available disc  
protection sheets or discs equipped with  
stabilizers, etc. These may damage the disc or  
cause breakdown of the internal mechanism.  
CAUTION  
For your safety, the driver should not insert  
or eject a disc opening the operation panel  
while driving.  
No/Non  
18  
MAX667VD  
8. DVD VIDEO SYSTEM  
DVD video is a high-quality digital video source that provides crisp and clear images. One 12 cm disc  
contains either one film or four hours of music.  
DVD Video Features  
This unit provides the following functions in  
addition to the high image quality and sound  
quality of DVD video.  
Note:  
The functions described in the section, “Features”,  
for example, the recorded language, subtitles,  
angles, etc. differ with the DVD video disc. Refer to  
the instructions provided with the DVD video.  
Some disc functions may operate differently from  
described in this manual.  
Multi-story function  
When a DVD video contains more than one story  
for a film, you can select the story you wish to  
enjoy. The operation procedures vary with the  
disc; observe the instructions for selecting a story  
provided during playback.  
Dolby digital  
Dolby digital enables up to 5.1 independent multi-  
channel audio reproduction, the same type of  
surround system that is used in movie theaters.  
Multi-sound function  
DVD video can store up to 8 languages for one  
film; select the language of your preference.  
• The languages stored on the disc are indicated  
by the icon shown below.  
DTS  
DTS (Digital Theater System) is a digital sound  
compression technique developed by Digital  
Theater Systems, Inc.  
This low sound compression format delivers a  
large amount of data and makes it possible to  
reproduce a high quality sound.  
Menu screens  
Menus can be called up during DVD video  
playback to perform menu setting.  
Multi-angle function  
A DVD video that is filmed from multiple angles  
allows you to select the angle of choice.  
• The number of recorded angles are indicated  
by the icon shown below.  
• Example showing menu display  
Subpicture (subtitles) function  
A DVD video can record subtitles for up to 32  
languages and you can select the language of  
the subtitles you wish to see.  
• The number of recorded subtitle languages are  
indicated by the icon shown below.  
19  
MAX667VD  
Discs  
Playable discs  
This DVD video player can play the following  
discs.  
Discs that cannot be played back  
This DVD video player cannot play back DVD-  
Audio, DVD-RAM, Photo CDs, etc.  
Note:  
It may also not be possible to play back CDs  
recorded on a CD-R unit and CD-RW unit. (Cause:  
disc characteristics, cracks, dust/dirt, dust/dirt on  
player’s lens, etc.)  
If a CD-R or CD-RW disc that has not been  
finalized is played, it will take a long time to start  
playing. Also, it may not be possible to play  
depending on its recording conditions.  
You cannot play Super Audio CDs. Playback of the  
CD player is not supported even if it is a hybrid  
disc.  
Playable discs  
DVD video discs  
video CDs  
CD TEXT  
WMA  
Audio CDs  
MP3 ID3 TAG  
About CD Extra discs  
A CD Extra disc is a disc in which a total of two  
sessions have been recorded. The first session is  
Audio session and the second session is Data  
session.  
Your personally-created CDs with more than  
second data sessions recorded cannot be played  
on this DVD video player.  
About MP3/WMA playback  
This unit can play back CD-R/CD-RW, DVD-R/  
RW and DVD+R/RW discs on which MP3/WMA  
music data have been recorded.  
For a detailed information, see the section  
entitled “Listening to an MP3/WMA” (page 43).  
Note:  
Note on region numbers  
The DVD video system assigns a region number  
to DVD video players and DVD discs by sales  
area.  
The DVD video region number is marked on the  
disc jacket as shown below.  
When you play a CD Extra disc, only the first  
session will be recognized.  
About playing a CD-R/CD-RW disc  
(MP3, WMA)  
This player can play CD-R/CD-RW discs  
previously recorded in music CD format (MP3,  
WMA) or video CD format.  
(Asia)  
3
4
ALL  
3
4
6
6
About playing a DVD-R/RW or  
DVD+R/RW disc  
This player cannot play DVD-R/RW and DVD+R/  
RW discs previously recorded in video CD  
format.  
(Oceania)  
ALL  
3
4
However, MP3/WMA files recorded on DVD-R/  
RW and DVD+R/RW discs can be played.  
20  
MAX667VD  
About the registered marks etc.  
• This product incorporates copyright protection  
technology that is protected by U.S. patents  
and other intellectual property rights. Use of  
this copyright protection technology must be  
authorized by Macrovision, and is intended for  
home and other limited viewing uses only  
unless otherwise authorized by Macrovision.  
Reverse engineering or disassembly is  
prohibited.  
• “DTS” and “DTS Digital Out” are trademarks of  
Digital Theater Systems, Inc.  
• “iPod” is for legal or rightholder-authorized  
copying only. Do not steal music.  
• Windows Media, and the Windows® logo are  
trademarks, or registered trademarks of  
Microsoft Corporation in the United States and/  
or other countries.  
• Manufactured under license from Dolby  
Laboratories.  
Dolby”, and the double-D symbol are  
trademarks of Dolby Laboratories.  
21  
MAX667VD  
9. OPERATIONS  
Basic Operations  
Note:  
Adjusting the volume  
Be sure to read this chapter referring to the chapter  
3. CONTROLS” on page 5.  
1. Press the [+]/[] buttons to adjust the volume.  
[+]: Increases the volume.  
Caution  
[]: Decreases the volume.  
CAUTION  
* The volume level indicated in the display is in a  
range from 0 (min.) to 33 (max.).  
When the unit is turned on, starting and  
stopping the engine with its volume raised to  
the maximum level may harm your hearings.  
Be careful about adjusting the volume.  
Caution  
CAUTION  
While driving, keep the volume level at which  
external sounds can be heard.  
Turning on and off the power  
Note:  
Mute  
Start the engine before using this unit.  
Be careful about using this unit for a long time  
without running the engine. If you drain the car’s  
battery too far, you may not be able to start the  
engine and this can reduce the service life of the  
battery.  
1. When in the TUNER, VISUAL or TV mode,  
press the [p] button to turn the mute on  
and off.  
When in the DVD PLAYER, iPod or changer  
mode, keep pressing the [p] button more  
than 1 second to turn the mute on and off.  
* When the mute is turned on, “MUTE” appears  
at the bottom left of the screen.  
1. Start the engine. The illuminations on this unit  
light up.  
Engine ON  
position  
Opening the operation panel  
and adjusting the angle  
Open the operation panel when inserting/ejecting  
a disc.  
The angle of the operation panel can be adjusted  
depending on the mounting angle of the unit or  
light coming into the car.  
2. Press the [&] (POWER) button to turn on the  
power.  
Note:  
Pressing this button while the power is turned on  
turns off the back light of the liquid crystal panel.  
3. To turn off the power, press and hold the [&]  
(POWER) button for more than 1 second.  
CAUTION  
Do not move the operation panel forcibly or  
do not apply strong force to the operation  
panel.  
When the operation panel is operating, be  
careful not to get your hand or finger caught  
between the operation panel and main unit  
or its mechanical parts.  
The driver should not operate the operation  
panel while driving.  
Selecting a mode  
1. Press the [SRC] button to display the Source  
menu.  
* External equipment not connected to this unit  
is not displayed.  
2. Touch the desired mode key.  
22  
MAX667VD  
Basic Operations  
Opening/closing the operation panel  
Adjusting the AUDIO  
Note:  
When the optional 5.1 ch Surround Decoder  
(DVH940) is used, the following tone adjustments  
cannot be made. To adjust the tone, refer to the  
section “5.1 ch Surround Decoder Operations”.  
1. Press the [7] (OPEN/CLOSE) button.  
The operation panel will be opened or closed.  
1. Press the [ADJ] button, then touch the  
[AUDIO] key.  
Note:  
The operation panel will close automatically when  
leaving it open for a while.  
When the operation panel is open, the touch panel  
cannot be operated.  
2. Touch the item key to adjust.  
3. Perform the adjustment.  
See the following sections for detail.  
Adjusting the angle of the operation  
panel  
The angle of the operation panel can be adjusted  
in the range of 0° to 30°.  
1. Keep pressing the [7] (OPEN/CLOSE) button  
more than 2 seconds.  
4. Touch the [Back] key to return to the previous  
screen.  
* In the following sections, only the details  
regarding adjustments are described,  
procedures to select items are skipped.  
Beeps will sound twice and the operation  
panel will start moving.  
Adjusting the balance/fader  
2-1. Touch the []] key of the BAL/FAD item.  
3-1. Touch the [{] or [}] key to adjust to the  
fader level.  
* The factory default setting is “0”. (Adjustment  
range: front 12 to rear 12)  
[{] :  
Emphasizes the sound from the front  
speakers.  
[}] :  
Emphasizes the sound from the rear  
speakers.  
2. When the operation panel is moved to your  
desired angle, release the button.  
The operation panel will stop.  
3-2. Touch the [[] or []] key to adjust to the  
* Once you adjust the angle of the operation  
panel, the operation panel will return to the  
adjusted angle even after it is open/closed.  
balance level.  
* The factory default setting is “0”. (Adjustment  
range: left 13 to right 13)  
[[] :  
Returning the operation panel to the  
original angle  
1. Keep pressing the [7] (OPEN/CLOSE)  
button.  
It will move, and stop at 30°.  
2. Keep pressing the [7] (OPEN/CLOSE) button  
again.  
Emphasizes the sound from the left  
speakers.  
[]] :  
Emphasizes the sound from the right  
speakers.  
It will move, and stop at 0°.  
23  
MAX667VD  
Basic Operations  
Adjusting the BASS  
The bass gain, bass frequency (center  
frequency) and bass Q can be adjusted as  
follows.  
Adjusting the non fader output  
volume  
You can adjust the volume output from the unit’s  
non fader output terminal.  
2-1. Touch the []] key of the BASS item.  
2-1. Touch the [[] or []] key of the NON FADER  
VOL item to adjust to desirable level.  
3-1. When the AUDIO BASS screen is displayed,  
touch the [[] or []] key for the desirable type  
to adjust to a desirable level.  
Setting range :  
–6 to 6 (The factory default setting is “0”.)  
GAIN :  
–6 to 8 (The factory default setting is “0”.)  
Turning on/off the MAGNA BASS  
EXTEND  
The Magna Bass Extend does not adjust the low  
sound area like the normal sound adjustment  
function, but emphasizes the deep bass sound  
area to provide you with a dynamic sound.  
FREQ. :  
50Hz, 80Hz, 120Hz (The factory default  
setting is “50Hz”.)  
Q :  
1, 1.25, 1.5, 2 (The factory default setting is  
1”.)  
2-1. Touch the [C] key to display the next menu  
screen.  
Adjusting the MID  
The MID gain, MID frequency (center frequency)  
and MID Q can be adjusted as follows.  
3-1. Touch [ON] or [OFF] of the [M-B EX] item to  
turn the Magna Bass Extend effect on or off  
(The factory default setting is “OFF”).  
2-1. Touch the []] key of the MID item.  
Adjusting the MONITOR  
3-1. When the AUDIO MID screen is displayed,  
touch the [[] or []] key for the desirable type  
to adjust to a desirable level.  
1. Press the [ADJ] button, then touch the  
[MONITOR] key.  
GAIN :  
–6 to 6 (The factory default setting is “0”.)  
FREQ. :  
700Hz, 1kHz, 2kHz (The factory default  
setting is “1kHz”.)  
Q :  
1.5, 2 (The factory default setting is “2”.)  
Adjusting the TREBLE  
The treble gain and treble frequency (center  
frequency) can be adjusted as follows.  
2. Perform the adjustment for the desired item.  
See the following sections for detail.  
3. Touch the [Back] key to return to the previous  
screen.  
2-1. Touch the []] key of the TREBLE item.  
* In the following sections, only the details  
regarding adjustments are described,  
procedures to select items are skipped.  
3-1. When the AUDIO TREBLE screen is  
displayed, touch the [[] or []] key for the  
desirable type to adjust to a desirable level.  
GAIN :  
–6 to 6 (The factory default setting is “0”.)  
FREQ. :  
8kHz, 12kHz (The factory default setting is  
12kHz”.)  
24  
MAX667VD  
Basic Operations  
Adjusting the brightness, color, hue  
and dimmer level  
Warning display when CCD camera  
is installed  
The following warning message is displayed  
during use of the CCD camera: “Make sure of  
safety around your vehicle”.  
Note:  
The Color and Hue settings can be adjusted only  
in the DVD video, Video CD, TV/VTR, VISUAL and  
DVD changer modes, and only when the car is  
stopped and the parking brake is applied.  
The Hue setting can be adjusted only when the  
NTSC mode is selected.  
2-1. Touch the [ON] or [OFF] key of the  
CAMERA WARNING item to turn this  
function on or off (The factory default setting  
is “ON”).  
2-1. Touch the []] key of the MONI ADJ item to  
display the MONI ADJ screen.  
Switching the VTR system between  
NTSC and PAL  
2-2. Touch the [Bright] key repeatedly to select  
the adjustment type. Every pressing it  
changes adjustment type as follows:  
[Bright] [Color] [Hue] [Dimmer] ➜  
[Bright] …  
Note:  
This setting is applied only to the VISUAL/VTR  
input mode.  
2-1. Touch the [NTSC] or [PAL] key of the  
NTSC/PAL item to set the VTR system.  
The factory default setting is:  
Bright” :  
Adjusts the brightness of the display.  
Color” :  
Adjusts the color saturation.  
• “NTSC” for the Korea/Taiwan model  
• “PAL” for the models for other countries  
Hue” :  
Changing the color of the title and  
command bars in the screen  
Adjusts the tone of color (red is emphasized  
or green is emphasized).  
Dimmer” :  
Adjusts the panel brightness when the car  
lights are ON/OFF.  
2-1. Touch the [AUTO], [DAY] or [NIGHT] key of  
the COLOR item to set the color mode (The  
factory default setting is “AUTO”).  
The factory default setting is :  
When the car light is off: brightest setting (58  
steps)  
When the car light is on :  
medium brightness (29 steps)  
AUTO” :  
The color is changed according to the status  
of the car light:  
• When the car light is off: light gray color  
• When the car light is on: dark gray color  
2-3. Touch [[] or []] key to adjust a level.  
DAY” :  
Set to the light gray color.  
Bright”  
[]] : Press to make image brighter.  
[[] : Press to make image dimmer.  
NIGHT” :  
Set to the dark gray color.  
Color”  
[]] : Press to increase color depth.  
[[] : Press to decrease color depth.  
Turning on/off the motion of the  
background picture  
Hue”  
2-1. Touch the [ON] or [OFF] key of the MOTION  
item to set the function (The factory default  
setting is “ON”).  
[]] : Press to increase green.  
[[] : Press to increase red.  
Dimmer”  
[]] : Press to make image brighter.  
[[] : Press to make image dimmer.  
25  
MAX667VD  
Basic Operations  
Front monitor lock  
When an external device is connected to the  
Visual terminal, lock the front monitor to show the  
visual input source. You can set this function only  
when the CONNECT item of the GENERAL  
menu is set to other than “NONE”.  
1. Keep pressing the [ADJ] button more than 1  
second to set the monitor lock.  
The front monitor screen is locked to show the  
visual input source.  
2. To cancel the monitor lock, press the [ADJ]  
button.  
Switching CONNECT (connect)  
Make the following settings when an external  
device is connected to the Visual terminal.  
NAVI :  
when a navigation system is connected.  
* When the navigation system is connected, use the  
monitor lock function. Locking the monitor locks  
the screen size in F.WIDE mode (full wide) and the  
VTR system to NTSC.  
OTHER :  
for external devices other than a navigation  
system.  
The screen returns to show the image of the  
selected mode.  
NONE :  
when no external device is connected.  
* The factory default setting is “NONE”.  
Adjusting the GENERAL  
2-1. Touch the [NAVI], [OTHER] or [NONE] key  
of the CONNECT item to set the function to  
NAVI”, “OTHER” or “NONE”.  
1. Press the [ADJ] button, then touch the  
[GENERAL] key.  
Setting the Blink LED  
When this function is set to “ON”, the Blink LED  
indicator will blink when the ACC power is turned  
off.  
2-1. Touch the [ON] or [OFF] key of the BLINK  
LED item to turn the function on or off (The  
factory default setting is OFF).  
2. Perform the adjustment for the desired item.  
See the following sections for detail.  
Performing the system check  
3. Touch the [Back] key to return to the previous  
screen.  
2-1. Touch the []] key of the SYSTEM CHECK  
* In the following sections, only the details  
regarding adjustments are described,  
procedures to select items are skipped.  
item.  
The available operation mode is listed in  
white letters.  
2-2. Touch [Check] key at the top right of the  
screen to perform the system check  
manually.  
Clock Adjustment  
2-1. Touch the []] key of the CLOCK item.  
The system will be restarted after  
performing the system check.  
2-2. Touch the [{] and [}] keys under the Hour,  
Minute and a.m./p.m. box to adjust the time,  
then touch the [SET] key (The factory  
default setting is 1:00 a.m.).  
* The time is displayed in 12-hour format.  
Setting the BEEP  
The sound heard when you make operations is  
called “beep”. The unit can be set up so that it  
does not produce this beep sound.  
* The factory default setting is “BEEP ON”.  
2-1. Touch the [ON] or [OFF] key of the BEEP  
item to turn the function on or off.  
26  
MAX667VD  
Basic Operations  
When the ENTER PERSONAL CODE  
screen appears  
The ENTER PERSONAL CODE screen will be  
displayed when turning the ACC power on after  
performing the following operations:  
• The car battery was replaced.  
• The backup power was cut off.  
• The [RESET] button was pressed.  
Note:  
Setting the anti-theft function  
(CATS)  
CATS” is the acronym of “Clarion Anti-Theft  
System”.  
When you set a PIN code (called as “Personal  
Code”), a theft is prevented by disabling the  
operation of the unit at the theft.  
In addition, set the BLINK LED function in the  
GENERAL menu to [ON] to improve the effect of  
the CATS function (see page 26).  
If you forgot your Personal Code, please consult  
your dealer or an authorized Clarion service  
center.  
Setting your Personal Code  
1. Enter your Personal Code currently set.  
1. Press the [ADJ] button, then touch the  
2. When the correct Personal Code is entered,  
the unit will restart from the initial startup  
screen.  
[GENERAL] key.  
2. Keep pressing the [CONT.] button more than  
2 seconds.  
The SET PERSONAL CODE screen appears.  
Note:  
When a Personal Code is already set, the ERASE  
PERSONAL CODE screen will appear. Retry this  
operation after erasing the old Personal Code.  
3. Enter your desired 4-digit Personal Code by  
touching the [0] to [9] keys, then touch the  
[ENT] key.  
Note:  
When you enter a wrong Personal Code, the  
message “CODE INCORRECT” is displayed and  
the Personal Code entry is prohibited for a while.  
This prohibited time is changed according to the  
number of times of wrong code entry as follows:  
1 to 6 times: 15 seconds  
7 times or more: 15 minutes  
* Touch the [CLR] key when you make a  
mistake in entering.  
4. Enter the same Personal Code again for  
confirmation, then touch and hold the [ENT]  
key for more than 2 seconds.  
The entered Personal Code will be set, and it  
will return to the previous screen.  
Erasing the Personal Code  
1. Press the [ADJ] button, then touch the  
[GENERAL] key.  
2. Keep pressing the [CONT.] button more than  
2 seconds.  
The ERASE PERSONAL CODE screen  
appears.  
3. Enter the Personal Code currently set by  
touching the [0] to [9] keys, then touch and  
hold the [ENT] key for more than 2 seconds.  
The message “CODE ERASED” appears,  
and it will return to the previous screen.  
27  
MAX667VD  
Basic Operations  
Setting the 2-ZONE function  
2-ZONE Function  
About the 2-ZONE function  
* The factory default setting is “OFF”.  
1. Press the [SRC] button to display the Source  
menu.  
The 2-ZONE function is a function that outputs  
separate sounds/images from the MAIN zone  
and SUB zone (such as the optional rear  
monitor) by simultaneously operating two  
sources in the one center unit. Thereby, plural  
listeners are allowed to enjoy separate audio/  
visual sources.  
2. Touch and hold the [2 ZONE] key more than  
1 second to turn the 2-ZONE function on.  
The 2-ZONE indication is displayed at the top  
left of the screen.  
* The function can also be switched by using the  
remote control unit. See the chapter “6. REMOTE  
CONTROL” for details.  
The 2-ZONE function allows internal sources  
(TUNER, DVD, VISUAL, iPod) and external  
sourcesviaCeNETconnection(CDchanger, TV,  
etc.) to be played on MAIN zone and SUB zone.  
Controlling sources of MAIN zone and SUB zone  
can be made from the main unit and from the  
remote control unit.  
The source sounds of the MAIN zone are played  
back from the speakers of the vehicle side, and  
those of the SUB zone are from the headphone  
systems (WH100/WH200).  
Sound volume control on the SUB zone is  
performed by the headphone system (WH100/  
WH200).  
2-ZONE indication  
Displayed when 2-ZONE function is  
turned on.  
[MAIN]:MAIN zone is selected.  
[SUB]:SUB zone is selected.  
Note:  
Radio stations cannot be selected when the SUB  
zone is selected.  
3. Touch the [SUB] key on the Source menu to  
switch to the SUB zone.  
The external different equipments connected via  
CeNET cannot simultaneously be used in the  
MAIN and SUB zones. Though the same  
equipment can be specified simultaneously.  
If the 5.1 channel surround decoder (DVH940) is  
connected, this function is disabled.  
When an external equipment is specified for the  
SUB zone, the 2-ZONE function is turned off if the  
function of audio mute for cellular phone is turned  
on or off.  
You can control the operation modes for the  
SUB zone.  
4. Press the [SRC] button, and touch the [MAIN]  
key to return to the MAIN zone.  
5. To turn the 2-ZONE function off, touch the [2  
ZONE] key on the Source menu.  
The SUB zone cannot be controlled when the  
function of audio mute for cellular phone is turned  
on.  
When the 2-ZONE function is turned on, the VTR  
mode cannot be specified for both of the MAIN and  
SUB zones simultaneously.  
28  
MAX667VD  
Basic Operations  
Monitor image and sound with 2-ZONE ON/OFF  
With 2-ZONE function OFF  
Front monitor lock ON  
Front monitor lock OFF  
Visual Visual  
Visual  
Visual  
connection  
[OTHER] (*1)  
connection  
[NAVI] (*1)  
connection  
connection  
[OTHER] (*1)  
[NAVI] (*1)  
Front monitor  
(main unit)  
Displays image of Displays image of Displays image of mode selected from  
device connected device connected the Source menu.  
to the Visual  
to the Visual  
terminal.  
terminal. (*3)  
Rear monitor  
(optional)  
Displays image of mode selected from the Source menu. (*2)  
Audio output  
Sound from mode selected from the Source menu is output from 4ch speaker,  
NON-FADER, and AUDIO-OUT.  
With 2-ZONE function ON  
Front monitor lock ON  
Visual  
Front monitor lock OFF  
Visual Visual  
Visual  
connection  
connection  
connection  
connection  
[OTHER] (*1)  
[NAVI] (*1)  
[OTHER] (*1)  
[NAVI] (*1)  
Front monitor  
(main unit)  
Displays image of Displays image of Displays image of mode selected from  
device connected device connected the Source menu in the MAIN zone  
to the Visual  
to the Visual  
terminal.  
mode.  
terminal. (*3)  
Rear monitor  
(optional)  
Displays image of mode selected from the Source menu in the SUB zone mode.  
(*2)  
Audio output  
• Sound from mode selected in the MAIN zone mode is output from 4ch speaker,  
NON-FADER and AUDIO-OUT.  
• Sound from mode selected in the SUB zone mode is output from SUB-OUT.  
*1:A device connected to the Visual terminal should be set up as described in the section “Switching  
CONNECT(connect)”.  
*2:No image is displayed on the rear monitor when a non-image mode such as CD changer mode, etc.  
is selected.  
*3:For safety reasons, this image is not displayed when the vehicle is moving. The picture can be  
watched only when the vehicle is stopped and the parking brake is applied.  
29  
MAX667VD  
Radio Operations  
Listening to the radio  
Selecting stations by entering  
frequency  
This function displays the Key Pad on the screen  
allowing you to tune by entering a frequency.  
1. Press the [SRC] button, and touch the  
[TUNER] key.  
The TUNER mode screen is displayed.  
1. Press the [BAND] button or touch the [Band]  
key to select the desired band (FM or AM).  
2. Touch the [Search] key to display the Key  
Pad screen.  
2. Press the [BAND] button or touch the [Band]  
key to select the radio band. Each time the  
button is pressed, the radio reception band  
changes in the following order:  
FM1 FM2 FM3 AM FM1...  
3. Press the [R] or [F] button to tune in the  
3. Touch the [0]~[9] key corresponding with the  
frequency you desired. When you input the  
wrong number, touch the [CLR] key to delete  
the last input number.  
4. Touch the [ENT] key to tune in to the entered  
frequency.  
5. Touch the [Back] key.  
previous or next preset station.  
Seek tuning  
1. Press the [BAND] button or touch the [Band]  
key to select the desired band (FM or AM).  
2. If MANU” is displayed at the bottom of the  
display, keep pressing the [BAND] button  
more than 1 second.  
Manual tuning  
There are 2 ways available: Quick tuning and  
step tuning.  
When you are in the step tuning mode, the  
frequency changes one step at a time. In quick  
tuning mode, you can quickly tune the desired  
frequency.  
MANU” in the display goes off, and seek  
tuning is now available.  
* The same operation is available by using the  
[Band] key.  
3. Touch the [X] or [x] key to automatically  
seek a station.  
1. Press the [BAND] button or touch the [Band]  
• When touching the [x] key, the station is  
sought in the direction of higher  
frequencies.  
• When touching the [X] key, the station is  
sought in the direction of lower frequencies.  
key to select the desired band (FM or AM).  
2. If MANU” is not displayed at the bottom of the  
display, keep pressing the [BAND] button  
more than 1 second.  
MANU” appears in the display, and manual  
tuning is now available.  
* The same operation is available by using the  
[Band] key.  
3. Tune into a station.  
Quick tuning :  
Touch and hold the [X] or [x] key for more  
than 1 second to tune in a station.  
Step tuning:  
Touch the [X] or [x] key to manually tune in  
a station.  
30  
MAX667VD  
Radio Operations  
Recalling a preset station  
There are total of 24 preset positions (6-FM1, 6-  
FM2, 6-FM3, 6-AM) to store individual radio  
stations in memory.  
There are 2 ways available to recall the preset  
station.  
Auto store  
Auto store is a function for storing up to 6 stations  
that are automatically tuned in sequentially. If 6  
receivable stations cannot be received, a  
previously stored station remains unoverwritten  
at the memory position.  
1. Touch the [Band] key to select the desired  
Using the [R] or [F] button  
band. (FM or AM)  
1. Press the [BAND] button to select the desired  
2. Touch the [List] key.  
band (FM or AM).  
3. Touch and hold the [AS] key for more than 2  
seconds.  
2. Press the [R] or [F] button to recall the  
previous or next stored station.  
A beep sounds and the stations with good  
reception are stored automatically to the  
preset channels.  
Using the Preset List screen  
1. Touch the [List] key.  
Preset scan  
Preset scan receives the stations stored in preset  
memory in order. This function is useful when  
searching for desired station in memory.  
1. Touch the [List] key.  
2. Touch the [PS] key to start preset scan. The  
unit starts scanning each station for 7  
seconds sequentially.  
3. When the desired station is tuned in, touch the  
[PS] key again to continue receiving that  
station.  
2. Touch the corresponding Preset key to recall  
the stored station.  
* You can select the desired band by touching  
the [Band] key.  
* Touching and holding the desired Preset key  
for more than 2 seconds will store the current  
station to the preset memory.  
Instant station recall (ISR)  
Instant station recall is a special radio preset that  
instantly accesses a favorite radio station at a  
touch of a button. The ISR function even  
operates with the unit in other modes.  
3. Touch the [List] key to return to the previous  
screen.  
ISR memory  
1. Select the station that you wish to store in ISR  
memory.  
2. Keep pressing the [ISR] button more than 2  
seconds to store the current station into the  
ISR memory.  
Manual memory  
1. Touch the [Band] key to select the desired  
band. (FM or AM)  
2. Select the desired station with seek tuning,  
manual tuning, or preset tuning.  
3. Touch the [List] key.  
Recalling a station with ISR  
4. Touch and hold one of the Preset key for more  
than 2 seconds to store the current station into  
the preset memory.  
1. In any mode, press the [ISR] button to switch  
to the TUNER mode and tune the selected  
radio station. “ISR” appears in the display.  
Press the [ISR] button again to return to the  
previous mode.  
* The [ISR] button is disabled when SUB zone is  
selected in the 2-ZONE mode.  
31  
MAX667VD  
DVD Video Player Operations  
Setting up the screen size  
Set up the screen size according to the rear view  
monitor which is connected to this unit.  
Changing DVD System  
Settings  
Note:  
4-1. Touch the [WIDE], [N PS] or [N LB] key of  
the TV DISPLAY item to change the screen  
size to “WIDE”, “N PS” or “N LB”.  
If the Setup operation is performed in the middle of  
DVD video play, the disc will restart from  
beginning.  
The settings on the DVD SETUP menu cannot be  
set with the remote control unit.  
* The factory default setting is “WIDE”.  
When watching through a conventional  
type of the rear view monitor (4:3)  
N PS :  
Selecting the DVD SETUP menu  
1. Press the [SRC] button, and touch the [DVD  
PLAYER] key.  
The leftmost and rightmost areas of the screen  
are cut off.  
The DVD PLAYER mode screen is displayed.  
2. Touch the [Option] key to display the Option  
menu.  
3. Touch the [Setup] key to display the DVD  
SETUP menu.  
This function allows displaying the important  
part of image fully on the screen. In some  
cases, image is displayed while being panned  
(scrolled).  
N LB :  
A black zone is created in the top and bottom  
areas of the screen.  
Touch the [C] key to display the next menu.  
Touch the [c] key to return to the previous  
menu.  
This method displays Cinema Scope and Vista  
Vision images without cutting them off by  
creating a black zone on the top and bottom  
gaps.  
When watching through a wide type of the  
rear view monitor (16:9)  
4. Perform setting for the desired setting items.  
See the following sections for detail.  
5. Touch the [Back] key.  
* In the following sections, only the details  
regarding settings are described, the  
procedures to select items are skipped.  
Setting up the angle mark display  
You can set up so that the angle mark appears on  
scenes where the angles can be switched.  
4-1. Touch the [ON] or [OFF] key of the ANGLE  
item to turn the Angle function “ON” or  
OFF”.  
* The factory default setting is “OFF”.  
32  
MAX667VD  
DVD Video Player Operations  
Setting up the disc menu language  
Setting up the country code  
Set up the country number for setting up of the  
parental level.  
4-1. Touch the []] key of MENU LANGUAGE  
item.  
The MENU LANGUAGE menu is displayed.  
4-1. Touch the []] key of PARENTAL LOCALE  
item.  
4-2. Touch the key to select a desired language  
to set it.  
The PARENTAL LOCALE screen is  
displayed.  
* The factory default setting is “ENGLISH”.  
4-2. Touch the ten-key (0 to 9) to input a 4-digit  
country code.  
Setting up the audio language  
* The factory default setting is “8583” (U.S.A).  
4-1. Touch the []] key of AUDIO LANGUAGE  
item.  
Country code list  
The AUDIO LANGUAGE menu is displayed.  
Country  
Region number 3  
BRUNEI DARUSSALAM  
Kingdom of Cambodia  
INDONESIA  
Input code  
4-2. Touch the key to select a desired language  
to set it.  
* The factory default setting is “ENGLISH”.  
6678  
7572  
7368  
7580  
Setting up the subtitle language  
4-1. Touch the []] key of SUBTITLE LANGUAGE  
KOREA, DEMOCRATIC  
PEOPLE’S REPUBLIC OF  
item.  
The SUBTITLE LANGUAGE menu is  
displayed.  
KOREA,REPUBLIC OF  
7582  
7665  
4-2. Touch the key to select a desired language  
to set it.  
LAO PEOPLE’S DEMOCRATIC  
REPUBLIC  
* The factory default setting is “ENGLISH”.  
MALAYSIA  
7789  
7777  
8072  
8371  
MYANMAR  
PHILIPPINES  
SINGAPORE  
Setting up the password for setting  
up of the parental level  
4-1. Touch the []] key of PASSWORD item.  
The PASSWORD screen is displayed.  
THAILAND  
VIETNAM  
8472  
8678  
8480  
7275  
7779  
8487  
4-2. Touch the ten-key (0 to 9) to input a 4-digit  
password.  
• Input the old password, and touch the  
[ENT] key.  
* The factory default setting is “0000”.  
* Input “4356” to return password to “0000”.  
• Input a new password, and touch the  
[ENT] key.  
EAST TIMOR  
HONG KONG  
MACAU  
TAIWAN, PROVINCE OF  
CHINA  
Note:  
When a disc with view restrictions is inserted, you  
will be prompted to input a password. The disc will  
not be viewable until the correct password is  
entered.  
Region number 4  
ANTIGUA AND BARBUDA  
ARGENTINA  
AUSTRALIA  
6571  
6582  
6585  
6683  
6666  
6690  
6679  
BAHAMAS  
BARBADOS  
BELIZE  
BOLIVIA  
33  
MAX667VD  
DVD Video Player Operations  
Country  
Input code  
Country  
Input code  
8479  
BRAZIL  
6682  
6776  
6779  
TONGA  
CHILE  
TRINIDAD AND TOBAGO  
TUVALU  
8484  
COLOMBIA  
8486  
URUGUAY  
8589  
COSTA RICA  
CUBA  
6782  
6785  
6877  
6879  
6967  
8386  
7074  
7168  
7184  
7189  
7284  
7278  
7477  
7573  
7772  
7788  
7077  
VANUATU  
8689  
VENEZUELA  
8669  
DOMINICA  
DOMINICAN REPUBLIC  
ECUADOR  
EL SALVADOR  
FIJI  
ANGUILLA  
6573  
ARUBA  
6587  
VIRGIN ISLANDS (BRITISH)  
8671  
CAYMAN ISLAND  
7589  
6789  
6767  
6775  
7075  
GRENADA  
GUATEMALA  
GUYANA  
CHRISTMAS ISLAND  
COCOS (KEELING) ISLANDS  
COOK ISLANDS  
HAITI  
FALKLAND ISLANDS  
(MALVINAS)  
HONDURAS  
JAMAICA  
FRENCH GUIANA  
FRENCH POLYNESIA  
GUADELOUPE  
GUAM  
7170  
8070  
7180  
7185  
7781  
KIRIBATI  
MARSHALL ISLANDS  
MEXICO  
MARTINIQUE  
MICRONESIA, FEDERATED  
STATES OF  
NAURU  
7882  
7890  
7873  
MONTSERRAT  
7783  
6578  
7867  
7885  
7870  
7780  
NEW ZEALAND  
NICARAGUA  
NETHERLANDS ANTILLES  
NEW CALEDONIA  
NIUE  
PALAU  
8087  
8065  
8071  
8089  
8069  
7578  
7667  
8667  
NORFOLK ISLAND  
PANAMA  
NORTHERN MARIANA  
ISLANDS  
PAPUA NEW GUINEA  
PARAGUAY  
PITCAIRN  
8078  
8475  
8467  
8770  
TOKELAU  
PERU  
TURKS AND CAICOS ISLANDS  
SAINT KITTS AND NEVIS  
SAINT LUCIA  
WALLIS AND FUTUNA  
ISLANDS  
SAINT VINCENT AND THE  
GRENADINES  
4-3. Touch the [ENT] key.  
SAMOA  
8783  
8366  
SOLOMON ISLANDS  
SURINAME  
8382  
34  
MAX667VD  
DVD Video Player Operations  
Setting up the parental level  
You can change the level of parental lock (audio-  
visual restriction).  
This function allows cutting scenes that are  
unfavorable for children or replacing them  
automatically with other scenes prepared in  
advance. For example, by replacing scenes of  
radical violence or portrayals of sex with safe  
scenes, you can make a trouble-free story as if it  
were so from the beginning.  
Basic Operations  
Loading a disc  
1. Press the [7] (OPEN/CLOSE) button to open  
the operation panel.  
2. Insert a disc into the center of the insertion  
slot with the label side facing up. The disc  
plays automatically after loading.  
Note:  
Never insert foreign objects into the disc insertion  
slot.  
If the disc is not inserted easily, there may be  
another disc in the mechanism or the unit may  
require service.  
4-1. Touch the [[] or []] key of PARENTAL  
LEVEL item.  
When you touch the [[] or []] key,  
PASSWORD input screen is displayed.  
8 cm (single play) discs cannot be used.  
4-2. Touch the ten-key (0 to 9) to input a 4-digit  
password, and touch the [ENT] key.  
Caution  
* The factory default setting of the password is  
“0000”.  
CAUTION  
For your safety, the driver should not insert  
or eject a disc opening the operation panel  
while driving.  
4-3. Touch the [[] or []] key to select level 1 to 8,  
or 0 (no parental).  
* The factory default setting is “8”.  
The relationship between DVD video category  
codes and parental level are shown in the table  
below. Use this table when setting the parental  
level.  
Watching/Listening to a disc already  
inserted  
1. Press the [SRC] button, and touch the [DVD  
PLAYER] key to select the DVD PLAYER  
mode.  
LEVEL7 NC-17  
(NO ONE 17 AND UNDER  
ADMITTED)  
Play starts automatically.  
If no disc is loaded in the unit, “NO DISC”  
appears in the display.  
LEVEL6  
R
(RESTRICTED)  
WARNING  
LEVEL4 PG-13  
(PARENTS STRONGLY  
CAUTIONED)  
Some videos may be recorded at higher  
than desired volume levels. Increase the  
volume gradually from the minimal  
LEVEL3 PG  
setting after the video has started.  
(PARENTAL GUIDANCE  
SUGGESTED)  
For your safety, the driver should not  
watch the video or operate the controls  
while driving. Please note that watching  
and operating the video while driving are  
prohibited by law in some countries.  
LEVEL1  
G
(GENERAL AUDIENCES)  
• The contents that the parental level restricts  
vary with the country code.  
Note:  
For your safety, the MAX667VD has a safety  
function which turns off the picture when the car is  
moving, so only the audio can be heard. The  
picture can only be watched when the car is  
stopped and the parking brake is applied.  
35  
MAX667VD  
DVD Video Player Operations  
Pausing play  
1. Press the [p] button or touch the [p]  
key to pause play.  
Showing the DVD PLAYER mode  
screen  
The DVD PLAYER mode screen is used to  
control the playback mode from the screen.  
PAUSE” appears in the display.  
2. To resume disc play, press the [p] button  
1. Touch the screen.  
again.  
The DVD PLAYER mode screen is displayed.  
If you do not touch the screen for 7 seconds,  
the display will return to the playback screen.  
Ejecting a disc  
1. Press the [7] (OPEN/CLOSE) button to open  
Showing the DVD menu  
the operation panel.  
2. Press the [o] (EJECT) button to eject disc.  
EJECT” appears in the display. The play  
mode then switches to the TUNER mode.  
1. Press the [MENU] button during playback.  
The DVD menu appears.  
* The displayed contents may differ depending  
* If a disc is left in the ejected position for 15  
seconds, the disc is automatically reloaded  
(Auto reload). In this case, however, the play  
mode will remain set to the TUNER mode.  
on the DVD software.  
• The same operation can be performed by  
touching the [Menu] key from the DVD  
PLAYER mode screen.  
Note:  
• Example showing DVD menu display  
If you force a disc into before auto reloading, this  
can damage the disc.  
DVD Video Operations  
Watching a DVD-Video  
After disc loading, the play mode is automatically  
engaged.  
• When playback is not started, press the [p]  
button or touch the [p] key.  
• Button operation may differ depending on the  
story of the disc.  
After the menu screen is displayed  
For normal DVD-Video discs, the DVD menu  
screen appears.  
After the DVD menu screen is displayed, select  
an item in the following operations and play it  
back.  
36  
MAX667VD  
DVD Video Player Operations  
Operating the DVD menu  
You can select the button items displayed in the  
DVD menu by directly touching it.  
If the button items are hard to select correctly,  
you can also operate them by displaying Key Pad  
on the screen.  
Stopping playback  
1. Showing the DVD PLAYER mode screen,  
touch and hold the [p] key for more than 1  
second during playback.  
Playback is stopped.  
2. To resume playback, touch the [p] key.  
Playback resumes from the scene where  
playback is stopped.  
* When the Key Pad is displayed, direct operation of  
the button items is disabled.  
* Direct operation of the button items is enabled  
only when the screen size is set to WIDE(see  
page 32).  
Pausing playback  
1. Press the [p] button or touch the [p]  
key during playback.  
Playback pauses.  
2. To resume playback, press the [p] button  
1. Press the [CONT.] button.  
The “Cross-Key” ({}[ ]) is displayed.  
• Repeat pressing the [CONT.] button  
changes the mode as follows: Cross-Key  
mode Ten-Key mode Direct operation  
mode Cross-Key mode …  
again.  
Playback resumes.  
2. Select the DVD menu button items using  
either the “Cross-Key” or the “Ten-Key”  
according to the disc contents menu.  
Slow playback  
1. Press the [p] button or touch the [p]  
key, then press and hold the [F] button.  
While pressing the button, slow playback  
continues at the speed 1/3 times the normal  
playback.  
3. Touch the [ENT] key to specify the selected  
button item.  
Switching Key Pad position  
When the Key Pad becomes difficult to view in  
the menu display, you can move it to the other  
side of the screen.  
Releasing the button resumes the normal  
playback.  
• Slow playback cannot be performed in the  
backward direction. In addition, audio  
cannot be reproduced during slow  
playback.  
Key PAD  
Key PAD  
37  
MAX667VD  
DVD Video Player Operations  
Skipping a chapter (searching)  
Searching with a chapter/title  
number  
You can locate the beginning of a scene using  
the chapter numbers or title numbers recorded  
on the DVD-Video disc.  
About chapter  
Chapter means a small segment to divide the  
data area of the disc.  
1. Press the [R] or [F] button during  
playback.  
1. Showing the DVD PLAYER mode screen,  
touch the [Search] key.  
Chapters are skipped, as many as the times  
the button is pressed, and playback starts.  
The Key Pad screen appears with the chapter  
number input mode. Touching the [Title] key  
turns the Key Pad to the title number input  
mode.  
Current  
location  
Title  
A large segment to divide the data area of  
the disc.  
Chapter  
Chapter  
up  
Chapter  
down  
Chapter  
A small segment to divide the data area of  
the disc.  
2. Input the number of the title/chapter that you  
want to play back with the [0] to [9] key.  
3. Touch the [ENT] key.  
• Pressing the [F] button starts playback  
from the beginning of the next chapter.  
• Pressing the [R] button starts playback  
from the beginning of the current chapter.  
When this button is pressed again within  
about 3 seconds, playback starts from the  
beginning of the previous chapter.  
• The unit may return to the DVD PLAYER  
mode screen when the [F] or [R]  
button is pressed.  
Playback starts from the scene of the input  
title number or chapter number.  
• If the input title/chapter number does not  
exist or searching with a title/chapter  
number is not allowed, the screen image will  
not change.  
4. Touch the [Back] key.  
Fast forward and fast backward  
1. Press and hold the [R] or [F] button  
during playback.  
Scan playback  
Scans and plays back all chapters recorded on  
the DVD-Video, the first 10 seconds for each.  
The playback speed becomes 5-time faster  
first and then 20-time faster 3 seconds later.  
• No audio is reproduced during fast forward  
and fast backward operation.  
• The fast forward and fast backward speed  
may differ depending on the disc.  
• The DVD PLAYER mode screen may  
appear when the [R] or [F] button is  
pressed.  
1. Showing the DVD PLAYER mode screen,  
touch the [Option] key.  
2. Touch the [CHAPTER SCAN] key, then touch  
the [Back] key.  
The message “C.SCN” will be displayed.  
After scan playback of all chapters on the  
disc, chapter scanning through the same disc  
is performed again.  
Depending on the disc, the menu may appear  
again after scan playback of all chapters  
within the title.  
3. Press the [R] button to turn off the scan  
playback.  
38  
MAX667VD  
DVD Video Player Operations  
Repeat playback  
This operation plays back chapters recorded on  
the DVD-Video repeatedly.  
Switching among languages  
On discs in which two or more audios or audio  
languages have been recorded, you can switch  
among the audio languages during playback.  
1. Showing the DVD PLAYER mode screen,  
touch the [Option] key.  
2. Touch the [CHAPTER REPEAT] key, then  
touch the [Back] key.  
The message “C.RPT” will be displayed.  
3. Perform the same operation to turn off the  
repeat playback.  
1. Showing the DVD PLAYER mode screen,  
touch the [Option] key.  
2. Touch the [Audio] key during playback.  
• Each time you touch the key, you can switch  
among audio languages.  
• Depending on the disc, up to 8 audios may  
be recorded. For details, see the mark of the  
8
disc (  
: Indicates that 8 audios have  
TOP function  
The TOP function resets the DVD player to the  
first chapter of the title.  
been recorded).  
• When the power is turned on and when the  
disc is changed to a new one, the language  
set as the factory default is selected. If that  
language has not been recorded, the  
language specified on the disc.  
• Depending on the disc, switching may be  
completely impossible or impossible on  
some scenes.  
1. Press the [BAND] button to play back the first  
chapter (chapter No. 1).  
Using the title menu  
On DVD discs containing two or more titles, you  
can select from the title menu for playback.  
1. Showing the DVD PLAYER mode screen,  
touch the [Top Menu] key during playback.  
The title menu screen appears.  
• It may take time to switch among audios.  
3. Touch the [Back] key to return to the previous  
screen.  
• Depending on the disc, the title menu  
cannot be called.  
• The same operation can be performed by  
pressing and holding the [MENU] button for  
more than 1 second.  
Switching subtitles  
On DVD discs in which two or more subtitle  
languages have been recorded, you can switch  
among the subtitle languages during playback.  
2. Select the button items displayed in the title  
menu screen by the same way of the DVD  
menu operation.  
1. Showing the DVD PLAYER mode screen,  
touch the [Option] key.  
2. Touch the [Sub Title] key during playback.  
Each time you touch the key, you can switch  
among subtitles.  
• Depending on the disc, items cannot be  
selected with the ten-key buttons.  
• Depending on the disc, up to 32 kinds of  
subtitles may be recorded. For details, see  
8
the mark of the disc (  
: Indicates that 8  
kinds of subtitles have been recorded).  
• Depending on the disc, switching may be  
completely impossible or impossible on  
some scenes.  
• It may take time to switch among subtitles.  
3. Touch the [Back] key to return to the previous  
screen.  
To turn off subtitles  
1. Repeat touching the [Sub Title] key until “Sub  
Title: OFF” is displayed on the screen.  
Subtitles are turned off.  
39  
MAX667VD  
DVD Video Player Operations  
Switching angles  
On DVD discs in which video images have been  
recorded in two or more angles, you can switch  
among the angles during playback.  
This operation can be performed when the  
Setting up the angle mark display” function  
(see page 32) is set to “ON”.  
Watching a video CD  
After disc loading, the play mode is automatically  
engaged.  
• Button operation may differ depending on the  
story of the disc.  
After the menu screen is displayed  
For Video CD discs equipped with the PBC (Play  
Back Control) function, the menu screen  
appears. After the menu screen is displayed,  
select an item in the following operations and  
play it back.  
1. Touch the [  
] (Angle) key during playback.  
Each time you touch the key, you can switch  
among angles.  
• Depending on the disc, up to 9 angles may  
be recorded. For details, see the mark of the  
Note:  
disc (  
: Indicates multi-angle).  
There are two types of Video CDs, and these differ  
in some operations and functions. For the  
operations and functions of a Video CD, see the  
documents attached to the Video CD.  
• Depending on the disc, angles may switch  
smoothly or switch with a momentary still  
image.  
• When the power is turned on and when the  
disc is changed to a new one, the language  
set at the time of factory shipment is  
selected. If that language has not been  
recorded, the language specified on the  
disc.  
Showing the V-CD menu (for Video  
CD discs with PBC)  
* This key does not function on some discs.  
1. Touch the screen to display the VIDEO CD  
mode screen, then touch the [Menu] key  
during playback.  
• Depending on the disc, switching may be  
completely impossible or impossible on  
some scenes.  
The Video CD menu appears.  
• It may take time to switch among angles.  
• Depending on the disc, scenes recorded in  
two or more angles may be played back.  
The displayed contents may differ, depending  
on the Video CD software.  
• Example showing menu display  
Displaying the playback status  
1. Showing the DVD PLAYER mode screen,  
touch the [Option] key.  
2. Touch the [P.Time] key during playback.  
3. Touch the [Back] key to return to the previous  
screen.  
Playback status is displayed on the screen.  
Title number  
2. To operate the Video CD menu items, press  
the [CONT.] button and use either the “Cross-  
Key Pad” or the “Ten-Key Pad” according to  
the disc contents menu.  
Chapter number  
Playback time  
Title001 Chapter001 00:0019  
• You can also operate the Video CD menu  
by directly touching the menu items.  
Pausing playback  
1. Press the [p] button. Playback stops.  
2. To resume playback, press the [p] button  
again.  
Playback resumes from the scene where  
playback is paused.  
40  
MAX667VD  
DVD Video Player Operations  
Slow playback  
1. Press the [p] button then press and hold  
the [F] button.  
Searching with a track number  
This operation allows searching with the track  
numbers recorded on the video CDs.  
While pressing the button, slow playback  
continues at the speed 1/3 times the normal  
playback.  
• Slow playback cannot be performed in the  
backward direction. In addition, audio  
cannot be reproduced during slow  
playback.  
1. Touch the screen to display the VIDEO CD  
mode screen.  
2. Touch the [Search] key.  
3. Input the track number that you want to play  
back with [0] to [9] key.  
4. Touch the [ENT] key.  
Playback starts from the scene of the input  
track number.  
• If the input track number does not exist or  
searching with a track number is not  
allowed, the screen image will not change.  
* If you are playing a disc with PBC and the PBC  
function is engaged, this operation may not be  
performed.  
Skipping a track (searching)  
1. Press the [R] or [F] button during  
playback.  
The track is skipped and playback starts.  
Current  
location  
5. Touch the [Back] key.  
Changing audio output  
You can change the audio output method.  
Track  
Track  
Track  
Backward  
direction  
Playback  
direction  
1. Touch the screen to display the VIDEO CD  
mode screen.  
2. Touch the [Audio] key during playback.  
Each time you touch the key, the audio output  
method is switched as follows:  
• Pressing the [F] button starts playback  
from the beginning of the next track.  
• Pressing the [R] button starts playback  
from the beginning of the current track.  
When this button is pressed again within  
about 2 seconds, playback starts from the  
beginning of the previous track.  
• In the case of some discs furnished with  
PBC function, when PBC is set to “ON”, this  
operation will cause the menu screen to be  
displayed.  
STEREO L (Left) R (Right)  
Displaying the playback status  
1. Touch the screen to display the VIDEO CD  
mode screen.  
2. Touch the [P.Time] key during playback.  
The screen will automatically return to the  
playback screen in about 7 seconds, and the  
playback status will be displayed on the  
playback screen.  
Fast forward and fast backward  
1. Press and hold the [R] or [F] button  
during playback.  
The playback speed becomes 5-time faster  
first and then 20-time faster 3 seconds later.  
Releasing the button resumes the normal  
speed playback.  
• No audio is reproduced during fast forward  
and fast backward operation.  
• The unit may return to the menu screen  
when the button is pressed.  
41  
MAX667VD  
DVD Video Player Operations  
On/Off of Playback Control  
On Video CDs equipped with Play Back Control  
function, you can turn it on/off.  
Skipping a track (searching)  
1. Press the [R] or [F] button during  
playback.  
Tracks are skipped, as many as the times the  
button is pressed, and playback starts.  
• Pressing the [F] button starts playback  
from the beginning of the next track.  
• Pressing the [R] button starts playback  
from the beginning of the current track.  
When this button is pressed again within  
about 2 seconds, playback starts from the  
beginning of the previous track.  
* The factory default setting is “ON”.  
1. Touch the screen to display the VIDEO CD  
mode screen.  
2. Each time you touch the [PBC] key, you can  
switch between on and off.  
When the PBC is turned on or off, the disc  
plays from the beginning.  
Playback control (PBC)  
This control signal is recorded on a Video CD for  
version 2.0 and used to control playback. Using  
pre-recorded menu screens in the Video CD with  
PBC, you can enjoy playback of software with a  
simplified dialog function or software with search  
function. You can also enjoy a still picture at high  
or standard resolution.  
TOP function  
The TOP function resets the DVD player to the  
first track of the disc.  
1. Press the [BAND] button to play back the first  
track (track No. 1).  
Fast forward and fast backward  
1. Press and hold the [R] or [F] button  
during playback.  
Listening to a CD  
This unit is a CD TEXT compatible model, and  
supports the display of the DISC TITLE, TRACK  
TITLE and ARTIST of the CD TEXT.  
After disc loading, the play mode is automatically  
engaged.  
The playback speed becomes 5-time faster  
first and then 20-time faster 3 seconds later.  
Releasing the button resumes the normal  
speed playback.  
• When playback is not started, press the [p]  
button or touch the [p] key.  
Note:  
This unit supports only CD TEXT in English. Also,  
some character data may not be reproduced  
properly on the display.  
Searching with a track number  
This operation allows searching using the track  
numbers recorded on the CDs.  
1. Touch the [Search] key.  
2. Input the track number that you want to play  
back with [0] to [9] key.  
3. Touch the [ENT] key.  
Pausing playback  
1. Press the [p] button or touch the [p]  
key during playback.  
Playback pauses.  
2. To resume playback, press the [p] button  
or touch the [p] key.  
Playback starts from the track of the input  
track number.  
• If the input track number does not exist or  
searching with a track number is not  
allowed, the screen image will not change.  
Playback resumes.  
4. Touch the [Back] key.  
42  
MAX667VD  
DVD Video Player Operations  
Selecting a track on the Track List  
screen  
This function allows you to select tracks from a  
displayed list.  
Displaying CD titles  
This unit can display title data for CD-text CDs.  
1. Touch the [Title] key.  
2. Touch the [X] key of the Disc, Artist, or Track  
item to cause the respective display to scroll  
once.  
1. Touch the [List] key.  
The Track List screen is displayed.  
2. When the desired track is not displayed, touch  
the [v] or [V] key to scroll the track list.  
3. Touch the desired track title key.  
Listening to an MP3/WMA  
This unit is an ID3 Tag compatible model.  
This unit supports the title, artist and album  
display of the ID3 Tag versions 1 and 1.1.  
After disc loading, the play mode is automatically  
engaged.  
The corresponding track is started playback.  
4. Press the [Back] key to return to the previous  
screen.  
Other various play functions  
1. Touch the [Option] key.  
What is MP3/WMA?  
MP3 is an audio compression method and  
classified into audio layer 3 of MPEG standards.  
WMA is an audio compression method  
developed by Microsoft Corporation.  
These audio compression methods have  
penetrated into PC users and become a standard  
format.  
These features compress the original audio data  
to about 10 percent of its initial size with a high  
sound quality. This means that about 10 music  
CDs can be recorded on a CD-R disc or CD-RW  
disc to allow a long listening time without having  
to change CDs.  
2. Touch the touch key of the function you want  
to play.  
[Track Scan] : track scan playback  
This operation scans and plays back all tracks  
recorded on the disc, the first 10 seconds for  
each.  
Note:  
Some CDs recorded on CD-R/RW mode may not  
be usable.  
* T.SCN” is displayed on the screen.  
[Track Repeat] : track repeat playback  
This operation plays back tracks recorded on  
the CD repeatedly.  
Displaying MP3/WMA ID3-TAG titles  
ID3 information such as title, artist and album title  
can be displayed for an MP3/WMA file containing  
ID3 Tag information.  
* T.RPT” is displayed on the screen.  
[Track Random] : track random playback  
This operation plays back all tracks on the  
disc in no particular order.  
* T.RDM” is displayed on the screen.  
3. To cancel the play, touch the key of the  
function to cancel.  
4. Touch the [Back] key to return to the previous  
screen.  
43  
MAX667VD  
DVD Video Player Operations  
Number of files or folders  
Precautions when creating an MP3  
1. The maximum allowable number of folders is  
255 (including root directory); the maximum  
allowable number of files is 512 (max. 255 per  
folder). This represents the maximum number  
of tracks that can be played back.  
2. Tracks are played in the order that they were  
recorded onto a disc. (Tracks might not  
always be played in the order displayed on the  
PC.)  
disc  
File extensions  
1. Always add a file extension “.MP3” or “.mp3”  
to an MP3 file, and “.WMA” or “.wma” to a  
WMA file by using single byte letters. If you  
add a file extension other than specified or  
forget to add these file extension, the file  
cannot be played. In addition, if you use upper  
case and lower case letters (capital and small  
letters) mixedly for file extensions, normal  
play may not be possible.  
• Some noise may occur depending on the  
type of encoder software used while  
recording.  
• In case of a track recorded at VBR (variable  
bit rate), the display for the play time of the  
track may be slightly different from the  
actual play time. Also, the recommended  
value of VBR ranges from 64 kbps to 320  
kbps.  
2. Files other than MP3/WMA data cannot be  
played.  
Playing files with a format not supported will  
be skipped, and the scan, random, and repeat  
playback mode may be canceled.  
Logical format (File system)  
• Depending on the damage conditions of a  
file, it may occur that the file is not played  
and the next file is played instead. Also, if  
the damage is in a severe condition, play  
stops showing the “ERROR 3” display.  
• After disc selection, the play mode is  
automatically engaged.  
1. When writing an MP3/WMA file on a disc,  
please select “ISO9660 level 1 or level 2  
(without including expansion format)” as  
the writing software format. Normal playback  
may not be possible if the disc is recorded on  
another format.  
2. The folder name and file name can be  
displayed as the title during MP3/WMA play  
but the title must be within 31 single byte  
alphabetical letters and numerals for the  
folder name and file name (including an  
extension). Entering more letters or numerals  
than specified may cause an incorrect  
display.  
Note:  
If ID3 Tag information was entered with 2-byte  
characters, it may occur that the characters are not  
reproduced properly on the display.  
MP3/WMA files that the DRM (Digital Rights  
Management) function is set cannot be played.  
Regarding MP3/WMA folder creation  
Folder structure  
Up to 8 folder levels (including the root directory)  
can be created for MP3/WMA files (items 1 – in  
the illustration). However, on this unit, folders  
created above the third level will be converted to  
2 levels.  
1. A disc with a folder having more than 8  
hierarchical levels will conflict with the  
ISO9660 and playback will be impossible.  
1
2
3
1
4
2
3
4
• Folders containing no MP3/WMA files are not  
recognized.  
• Only folders containing tracks (1 to 4 in  
illustration) are given numbers and displayed  
on the list.  
44  
MAX667VD  
DVD Video Player Operations  
Pausing playback  
1. Press the [p] button or touch the [p]  
key during playback.  
Selecting a folder/track on the LIST  
screen  
1. Touch the [List] key during playback.  
Playback pauses.  
Folder List screen is displayed.  
2. To resume playback, press the [p] button  
or touch the [p] key again.  
Playback resumes.  
2. When the desired folder is not displayed,  
touch the [v] or [V] key to scroll the list.  
3. Touch the desired folder name key.  
The Track List screen appears.  
4. Touch the [v] or [V] key to scroll the list, and  
touch the desired track name key.  
Skipping a track (searching)  
1. Press the [R] or [F] button during  
playback.  
The corresponding track is started playback.  
• Touch the [X] or [x] key to display the  
Track List of the previous or next folder.  
• Touch the [Back] key to return to the Folder  
List screen.  
Tracks are skipped, as many as the times the  
button is pressed, and playback starts.  
• Press the [F] button starts playback from  
the beginning of the next track.  
• Press the [R] button starts playback from  
the beginning of the current track. When this  
button is pressed again within about 2  
seconds, playback starts from the  
5. Touch the [Back] key.  
Playback by selecting a folder and  
track (Direct select mode)  
beginning of the previous track.  
This operation allows searching using the folder  
and track numbers recorded on the MP3/WMA  
disc.  
* This operation skips the track over the folder.  
Fast forward and fast backward  
1. Press and hold the [R] or [F] button  
during playback.  
1. Touch the [Search] key.  
The Key Pad screen appears with the track  
number input mode.  
Touching the [Folder] key turns the Key Pad  
to the folder number input mode.  
The playback speed becomes 5-time faster  
first and then 20-time faster 3 seconds later.  
Releasing the button resumes the normal  
speed playback.  
2. Input the number for the track or folder that  
you want to play back with [0] to [9] key.  
3. Touch the [ENT] key.  
Skipping the current folder  
When you select the folder number, playback  
starts from track 1 of the input folder number.  
1. Press the [BAND] button during playback.  
The tracks of the current folder are skipped  
and playback starts from the first track of the  
next folder.  
4. Touch the [Back] key.  
45  
MAX667VD  
DVD Video Player Operations  
Other various play functions  
1. Touch the [Option] key.  
Displaying CD titles  
1. Touch the [Title] key.  
2. Touch the [X] key of the Folder, Track,  
Album, Artist or Title item to cause the  
respective display to scroll once.  
2. Touch the touch key of the function you want  
to play.  
[Track Scan] : track scan playback  
This operation scans and plays back all tracks  
recorded on the disc, the first 10 seconds for  
each.  
* T.SCN” is displayed on the screen.  
[Folder Scan] : folder scan playback  
This operation plays back the first tracks of all  
folder on the MP3/WMA disc, the first 10  
seconds for each.  
* F.SCN” is displayed on the screen.  
[Track Repeat] : track repeat playback  
This operation plays back the tracks currently  
being played back repeatedly.  
* T.RPT” is displayed on the screen.  
[Folder Repeat] : folder repeat playback  
This operation plays back tracks in an MP3/  
WMA folder repeatedly.  
* F.RPT” is displayed on the screen.  
[Track Random] : track random playback  
This operation plays the tracks in the folder in  
a random order.  
* T.RDM” is displayed on the screen.  
[Folder Random] : folder random playback  
This operation plays back tracks recorded on  
the disc in no particular order.  
* F.RDM” is displayed on the screen.  
3. To cancel the play, touch the key of the  
function to cancel.  
4. Touch the [Back] key to return to the previous  
screen.  
46  
MAX667VD  
Other Functions  
Entering titles  
Title list play  
You can display a list of titles, then select the CD  
track, disc or broadcast station to listen to from  
that list.  
* You cannot display a title list with the unit in Seek,  
Preset Scan, Auto store (TUNER or TV) mode.  
Cancel those operation modes before displaying a  
title list.  
Titles up to 10 characters long can be stored in  
memory and displayed for Radio stations, CD,  
TV stations, and CDs in the CD changer. The  
numbers of titles that can be entered for each  
mode are as follows.  
Mode  
Number of titles  
30 titles  
TUNER mode  
CD mode  
TV mode  
1. Touch the screen (TV mode only).  
2. Touch the [List] key to display the LIST  
screen.  
50 titles  
15 titles  
The following titles can be changed in a title  
list screen.  
TUNER :  
CD changer mode  
Number of titles  
A title of a station stored for the presets 1 to 6  
or frequency is displayed.  
CD-changer :  
CDC655Tz connected 100 titles  
DCZ625 connected 100 titles  
DISC titles for discs 1 to 6 are displayed.  
When there is not any disc in the changer,  
NO DISC” is displayed.  
* You cannot enter titles with the unit in Seek,  
Preset Scan, Auto store (TUNER or TV) mode.  
Cancel each of those operations before entering  
titles.  
TV :  
A title of a channel stored for the presets 1 to  
6 or a channel number is displayed.  
3. Touch the desired title key (1 to 6) to select.  
The selected broadcast station or disc is  
played.  
1. Press the [SRC] button to select the mode you  
want to enter a title (TUNER, CD, CD changer  
or TV).  
2. Select and play a CD in the CD changer or a  
CD track or tune in to a Radio station or a TV  
station for which you want to enter the title.  
4. Touch the [Back] key to return to the previous  
screen.  
3. Touch the screen (TV mode only).  
4. Touch the [List] key to display the LIST  
screen.  
To enter a CD title, touch the [Title] key.  
5. Touch the [Edit] key.  
The title input mode display appears.  
6. Touch keys of the characters, symbols, etc.  
shown in the display to input titles.  
: Centering  
Back Space” : Backspace  
: Space  
: Memory  
: Scroll  
Memo”  
C”  
Note:  
Up to 10 characters can be input.  
To switch the character types, touch the scroll key  
(C) at the left of the screen.  
7. Repeat the step 6 to enter the complete title.  
8. Touch and hold the [Memo] key for more than  
2 seconds to store the title into memory. The  
display returns to the original mode screen.  
47  
MAX667VD  
Other Functions  
Changing over monitor display size  
Internal amplifier cancel function  
This function is used to disable the internal  
amplifier when an external amplifier is  
connected.  
Note:  
This function is not available while you are driving.  
Switch to the DVD PLAYER (DVD video or video  
CD)/VISUAL/DVD changer/TV mode you see.  
* The factory default setting is “OFF”.  
1. Touch the screen to display the mode menu,  
then touch “Display size” key ([F.WIDE], etc.)  
at the top right of the screen.  
The screen changes to the SCREEN MODE  
menu.  
2. Touch the [F.WIDE], [WIDE], [CINEMA], or  
[NORMAL] key to select the desired monitor  
display size.  
1. Press the [ADJ] button.  
2. Touch the [AUDIO EXT.] key.  
3. Touch the [ON] or [OFF] of the AMP CANCEL  
item to turn the internal amplifier on or off.  
4. Touch the [Back] key to return to the previous  
screen.  
Triggered audio mute for cellular  
telephones  
This unit requires special wiring to mute the audio  
signal automatically when a cellular telephone  
rings in the car.  
This function is not compatible with all cellular  
telephones. Contact your local authorized  
Clarion dealer for information on proper  
installation and compatibility.  
F. WIDE” : (full wide mode)  
The whole image elongates horizontally.  
WIDE” : (wide mode)  
The image at right and left ends in a display  
elongates horizontally.  
CINEMA” : (cinema mode)  
The image at both top and bottom in a display  
disappears.  
NORMAL” : (normal display)  
There is a black area at both right and left  
ends of a display. In case of normal TV  
broadcasting (4:3), the image can be shown  
without being cut or deformed.  
Note:  
When a 4:3 scale image (non-wide screen image)  
is displayed, part of the image may be out of view  
or the image may be distorted when in wide mode  
or full-wide mode. Please use normal mode for  
viewing such images with the proper aspect ratio.  
During superimposed display, it becomes a full-  
wide mode.  
48  
MAX667VD  
10.OPERATIONS OF ACCESSORIES  
iPod Operations  
This unit can be used to control a connected  
Apple iPod (third generation version 2.2 or  
Controlling the iPod  
Selecting the iPod mode  
higher, iPod Mini, fourth generation, iPod nano,  
1. Connect the iPod to the connector.  
iPod with video).  
2. Press the [iPod] button.  
Note:  
The iPod mode can also be selected by  
touching the [iPod] key on the Source menu.  
Note that iPod versions higher than those noted  
above may not be playable.  
The unit will not operate, or may operate  
improperly with unsupported versions.  
First and second generation iPod and iPod shuffle  
cannot be used.  
[MENU] key  
[Shuffle] key  
List keys  
Notes regarding use of Apple iPod  
• When using an iPod, after connecting the iPod  
to the connector, select the iPod mode by  
pressing the [iPod] button, or touching the  
[iPod] key on the Source menu.  
• After the iPod has been connected to this unit,  
the iPod’s buttons are disabled for operation.  
• When the iPod mode has been selected, a  
special iPod control screen is displayed  
different from the main screens for other  
modes.  
Operation display  
• When the iPod mode has been selected, the  
screen image input from the VISUAL terminal  
is output to the rear monitor.  
[p] key  
[R] , [F] key  
• The remote control unit cannot be used to  
perform scan, repeat or random play.  
• This unit can display the Podcast titles*, Artist  
names, Album titles, Song titles, Genre names,  
Playlist titles, Composer names and Audio  
Book titles* registered on the iPod. When no  
data is present, the title display will remain  
blank.  
iPod menu screen operation keys  
[MENU] key  
• Displays the Option menu screen.  
List keys  
• Displays the corresponding list screen.  
[Podcasts], [Artists], [Albums], [Genres]  
and [Playlists] are available from the iPod  
menu screen. [Audio Books],  
[Composers] and [Songs] are only  
available from the Option menu screen.  
[Shuffle] key  
* Whether these functions are available or not  
depends on the iPod version.  
• The iPod is used with the equalizer function  
turned OFF.  
• Use to switch the shuffle mode, in the order:  
Song Shuffle Album Shuffle Shuffle  
OFF.  
The default value is Shuffle OFF.  
When enabled, this function performs  
playback of tracks in random order,  
regardless of the order in which they are  
recorded.  
Precautions regarding battery  
consumption:  
When the iPod’s internal battery becomes  
depleted, the recharge warning indicator  
will appear in the iPod’s display. In this  
condition, the iPod cannot be played even if  
attached to the MAX667VD. Also, the  
MAX667VD’s recharging function cannot be  
used to recharge the iPod.  
As a result, when the iPod’s battery  
becomes depleted, use the dedicated  
charger provided with it to recharge the  
battery.  
[p] key  
• Use to control playback and pause.  
[R], [F] keys  
• Use to perform track selection. Touch and  
hold to enable fast-forward or fast-  
backward.  
49  
MAX667VD  
iPod Operations  
Note:  
Play mode menu  
The title display (*) shows, from top level down,  
the SONG title, ARTIST name, and ALBUM title.  
Press the operation display to scroll the SONG  
title.  
• Uses to switch the shuffle mode and repeat  
mode.  
List keys  
• Displays the corresponding list screen.  
[Podcasts], [Artists], [Albums], [Genres],  
[Playlists], [Audio Books], [Composers]  
and [Songs] are available.  
[Back] key  
• Uses to return to the iPod menu screen.  
Audio Books menu  
Operation display  
Play/Pause icon(p) display  
Track No.  
Clock time  
• Uses to change the playback speed during  
playing Audio Books.  
[Pod Color] key  
Play mode (*1)  
Song title/  
Artist name/  
Album title (*2)  
Progress/  
• Changes the background color of the iPod  
menu screen.  
[Pod Color]: changed to the color of the  
connected iPod.  
[Normal Color]: changed to light blue.  
Volume indicator  
Pausing playback  
1. Press the [p] button or touch the [p]  
Play time  
Remaining time  
key during playback.  
Playback pauses.  
2. To resume playback, press the [p] button  
or touch the [p] key again.  
Playback resumes.  
Note:  
*1 Displays status of Repeat, Shuffle play.  
1
A
S
A
: 1-track Repeat  
: All Repeat  
: Song Shuffle  
: Album Shuffle  
Skipping a track (searching)  
1. Press the [R] or [F] button during  
*2 When a Podcast or Audio Book which has  
two or more chapters is played back, the  
chapter title and chapter number are  
displayed.  
playback.  
Tracks are skipped, as many as the times the  
button is pressed, and playback starts.  
• Pressing the [F] button starts playback  
from the beginning of the next track.  
• Pressing the [R] button starts playback  
from the beginning of the current track.  
When this button is pressed again within  
about 2 seconds, playback starts from the  
beginning of the previous track.  
Option menu screen operation keys  
List keys [Back] key  
Play mode menu  
* When a Podcast or Audio Book which has two  
or more chapters is played back, pressing the  
[R] or [F] button during pausing moves  
the current location to the beginning of the  
previous or next chapter.  
[Pod Color] key  
List keys  
Audio Books menu  
50  
MAX667VD  
iPod Operations  
Fast forward and fast backward  
1. Press and hold the [R] or [F] button  
during playback.  
Viewing video data in the iPod (only  
for the iPod with video features)  
When you connect an iPod with video features by  
using the optional connector cable for iPod with  
video (released soon), you can enjoy the video  
data and slideshow data stored in the iPod  
showing them on the display of this unit (and the  
rear monitor if connected).  
The playback speed becomes 5-time faster  
first and then 20-time faster 3 seconds later.  
Releasing the button resumes the normal  
speed playback.  
TOP function  
The TOP function resets the player to play the  
first track of the tracks.  
Note:  
Do not connect the iPod to this unit when a Video  
Playlists item is selected on the iPod.  
1. Press the [BAND] button to play back the first  
1. Touch and hold the [MENU] key on the iPod  
menu screen for more than 1 second. The  
screen will be changed to a black screen.  
In this condition, the iPod cannot be controlled  
from this unit. The iPod is turned into the  
normal operation mode, and you can control  
the iPod using the original controls of the iPod  
(iPod operation mode).  
2. Play back your desired video data or  
slideshow data from the iPod.  
The specified image data will be displayed on  
the display (and the rear monitor if  
connected).  
track of the current list.  
* To play back all of the tracks in the Songs list  
from the first track, keep pressing the [BAND]  
button more than 1 second.  
Selecting a list item from a list screen  
1. Touch the desired List key from the iPod  
menu screen or the Option menu screen to  
display the corresponding list screen.  
2. Touch a desired list item on the screen to  
display the corresponding list of tracks.  
• Use the [v] and [V] keys to scroll the list.  
* Skip this operation for the Podcasts, Audio  
3. To return to the iPod menu screen, touch the  
screen.  
* When you touch the screen during playing back  
image data, the playback is terminated and the  
first track of the first playlist will be played back.  
Books and Songs list.  
3. Touch the desired track name on the list to  
play back.  
• Use the [v] and [V] keys to scroll the list.  
Note:  
Image data may not be played back according to  
the status of the iPod.  
51  
MAX667VD  
VISUAL Operations  
This function is available when a VTR, etc. is connected to the visual terminal.  
Changing the audio input level  
The visual terminal can be used to change the  
input audio level.  
* The factory default setting is “HIGH”.  
1. Touch the screen to display the menu, then  
WARNING  
For your safety, the driver should not watch  
the VTR, etc. or operate the controls while  
driving. Please note that watching and  
operating the VTR, etc. while driving are  
prohibited by law in some countries.  
repeat touching the [SENS] key to select the  
level.  
HIGH: 16.25 dB  
MID: 3.75 dB  
LOW: 0 dB  
Switching to the VISUAL mode  
Note:  
For your safety, the MAX667VD has a safety  
function which turns off the picture when the car is  
moving, so only the audio can be heard. The  
picture can only be watched when the car is  
stopped and the parking brake is applied.  
1. Press the [SRC] button, and touch the  
[VISUAL] key.  
CD Changer Operations  
Note:  
Displaying the CD TEXT titles  
This operation is only possible when this unit is  
connected with a CD TEXT compatible CD  
changer.  
When an optional CD (DVD) changer is connected  
through the CeNET cable, this unit controls all CD  
(DVD) changer functions. This unit can control up  
to 2 changers (CD and/or DVD).  
1. Touch the [Title] key.  
2. Touch the [X] key of the Disc, Artist, or Track  
item to cause the respective display to scroll  
once.  
CD changer functions  
Press the [SRC] button and touch the [CD A/C]  
key to change to the CD changer mode.  
Playback automatically starts.  
* If 2 CD changers are connected, the [CD A/C 1]  
and [CD A/C 2] keys will display in the Source  
menu.  
Selecting a CD and track from the  
list  
1. Touch the [List] key.  
* If “NO MAGAZINE” appears in the display, insert  
the magazine into the CD changer. “DISC  
CHECKING” appears in the display while the  
player loads (checks) the magazine.  
* If “NO DISC” appears in the display, eject the  
magazine and insert discs into each slot. Then,  
reinsert the magazine back into the CD changer.  
2. Touch the corresponding Disc key (1 to 6) to  
select the desired disc.  
The Track List screen appears.  
* When touching and holding a Disc key for  
more than 1 second, the title will scroll.  
3. When the desired track is not displayed, touch  
the [v] or [V] key to scroll the track list.  
4. Touch the desired Track key.  
Pausing play  
1. Press the [p] button or touch the [p]  
key during playback.  
Playback pauses and “PAUSE” appears in  
the screen.  
2. To resume playback, press the [p] button  
or touch the [p] key.  
The corresponding track is started playback.  
* When touching and holding a Track key for  
more than 1 second, the title will scroll.  
5. Touch the [Back] key to return to the Disc List  
screen.  
Touch the [Back] key again to return to the  
CD CHANGER mode screen.  
Playback resumes.  
52  
MAX667VD  
CD Changer Operations  
Switching to a next disc (Disc Up  
function)  
Other various play functions  
1. Touch the [Option] key.  
The disc up function plays from the first track  
(track No.1) of the next disc.  
1. Press the [BAND] button.  
The disc changes to the next disc.  
Searching with a track number  
* This function is available only for the current disc.  
1. Touch the [Search] key.  
2. Input the track number that you want to play  
back with [0] to [9] key.  
3. Touch the [ENT] key.  
2. Touch the touch key of the function you want  
to play.  
[Track Scan] : (track scan playback)  
This scan play locates and plays the first 10  
seconds of each track on a disc automatically.  
[Disc Scan] : (disc scan playback)  
This scan play locates and plays the first 10  
seconds of the first track on each disc in the  
currently selected CD changer.  
Playback starts from the track of the input  
track number.  
• If the input track number does not exist or  
searching with a track number is not  
allowed, the screen image will not change.  
4. Touch the [Back] key.  
[Track Repeat] : (track repeat playback)  
The repeat play continuously plays the  
current track.  
[Disc Repeat] : (disc repeat playback)  
After all tracks in the current disc have been  
played, the disc repeat play automatically  
replays the current disc over from the first  
track.  
[Track Random] : (track random playback)  
The random play selects and plays individual  
tracks on the disc in no particular order.  
[Disc Random] : (disc random playback)  
The disc random play selects and plays  
individual tracks or discs automatically in no  
particular order.  
Skipping a track (searching)  
* This function is available only for the current disc.  
1. Press the [R] or [F] button during  
playback.  
Tracks are skipped, as many as the times the  
button is pressed, and playback starts.  
• Pressing the [F] button starts playback  
from the beginning of the next track.  
• Pressing the [R] button starts playback  
from the beginning of the current track.  
When this button is pressed again within  
about 2 seconds, playback starts from the  
beginning of the previous track.  
3. To cancel the play, touch the key of the  
function to cancel.  
Fast forward and fast backward  
1. Press and hold the [R] or [F] button  
during playback.  
4. Touch the [Back] key to return to the previous  
screen.  
The playback speed becomes 5-time faster  
first and then 20-time faster 3 seconds later.  
Releasing the button resumes the normal  
speed playback.  
53  
MAX667VD  
DVD Changer Operations  
Only basic operations of DVD changer can be  
performed from the unit. Use the remote control  
unit to perform the following functions.  
• Scan, Repeat, Random functions  
• Video CD Playback function ON/OFF  
• DVD Setup function, Audio, Subtitle, Angle  
setting function  
For details on operations other than those  
described below, see the pages of “DVD Video  
Player Operations”.  
Selecting a disc from the list  
1. Touch the [List] key.  
2. Touch the corresponding Disc key (1 to 6) to  
select the desired disc.  
The disc changes to the specified disc.  
Switching to a next disc (Disc Up  
function)  
1. The disc up function plays from the first track  
(track No.1) of the next disc.  
For details on DVD changer precautions, refer to  
the supplied owner’s manual.  
Press the [BAND] button.  
Each time you press the [BAND] button, the  
disc changes to the next disc.  
Note:  
When the DVD changer (VCZ625) is connected via  
optical cable, no sound will be output if AUDIO  
OUT is switched to ANALOG on the changer’s  
“GENERAL SETUP” menu.  
Set the “TV TYPE” of the DVD changer’s  
“GENERAL SETUP” menu to the same setting as  
that set in the “Switching the VTR system between  
NTSC and PAL” of this unit.  
TV Operations  
TV functions  
Watching a video  
To watch TV, requires a TV tuner. When an  
optional TV tuner is connected through the  
CeNET cable, this unit controls all TV tuner  
functions.  
The TV tuner has a VTR input terminal to which  
1 external device can be connected. Connect a  
12V video cassette player (VCP) or video  
cassette recorder (VCR) to the TV tuner input  
terminal.  
WARNING  
1. Touch the screen to display the TV/VTR mode  
menu, then touch the [Option] key.  
2. Touch the [VTR] key to change to the VTR  
mode.  
• To return to the TV broadcast, perform the  
same operation again.  
Note:  
For your safety, the driver should not watch  
the TV or operate the controls while driving.  
Please note that watching and operating  
the TV while driving are prohibited by law in  
some countries.  
When the 2-ZONE function is turned on, the VTR  
mode cannot be specified for both of the MAIN and  
SUB zones simultaneously.  
Watching TV  
Note:  
For your safety, the MAX667VD has a safety  
function which turns off the picture when the car is  
moving, so only the audio can be heard. The  
picture can only be watched when the car is  
stopped and the parking brake is applied.  
Seek tuning  
1. Press the [BAND] button or touch the [Band]  
key to select the desired TV band (TV1 or  
TV2).  
1. Press the [SRC] button, and touch the  
* If “MANU” is displayed in the display, press  
and hold the [BAND] button for more than 1  
second. “MANU” in the display goes off.  
[TELEVISION] key.  
2. Press the [BAND] button or touch the [Band]  
key to select the desired TV band (TV1 or  
TV2).  
Every pressing the button toggles the TV  
band between TV1 and TV2.  
3. Press the [R] or [F] button to tune in the  
2. Touch the [X] or [x] key to automatically  
seek a station.  
• Touching the [x] key to tune up the channel  
to the next available TV station, and the [X]  
key to tune down.  
previous or next preset TV station.  
54  
MAX667VD  
TV Operations  
Selecting with a channel number  
Recalling a preset station  
Note:  
A total of 12 TV stations can be stored (6-TV1  
This function is available only when the NTSC TV  
tuner is connected.  
1. Touch the screen to display the TV/VTR mode  
and 6-TV2).  
There are 2 ways available to recall the preset  
station.  
menu, then touch the [Search] key.  
Using the [R] or [F] button  
2. Enter the channel number corresponding with  
the station you desired by touching the [0] to  
[9] key.  
1. Press the [BAND] button or touch the [Band]  
key to select the desired TV band. (TV1 or  
TV2)  
2. Press the [R] or [F] button to recall a  
stored TV station.  
Using the Preset List screen  
• If you touch the wrong number ([0] to [9]  
key), you can delete it to touch the [CLR]  
key.  
3. Touch [ENT] key. The TV station you required  
would be tuned.  
4. Touch the [Back] key.  
1. Touch the screen to display the menu, then  
touch the [List] key.  
2. Touch the corresponding Preset key to recall  
the stored station.  
Manual tuning  
* You can select the desired band by touching  
the [Band] key.  
There are 2 ways available: Quick tuning and  
step tuning. When you are in the step tuning  
mode, the channel changes one step at a time. In  
quick tuning mode, you can quickly tune the  
desired frequency.  
* Touching and holding the desired Preset key  
for more than 2 seconds will store the current  
station into the preset memory.  
3. Touch the [List] key again to return to the  
1. Press the [BAND] button or touch the [Band]  
previous screen.  
key to select the desired band. (TV1 or TV2)  
* If “MANU” is not displayed in the display, keep  
pressing the [BAND] button more than 1  
second. “MANU” appears and manual tuning is  
now available.  
Manual memory  
1. Touch the [Band] key to select the desired TV  
band. (TV1 or TV2)  
2. Tune into a station.  
2. Tune in the desired TV station to be stored.  
3. Touch the [List] key.  
4. Touch and hold one of the Preset key for more  
than 2 seconds to store the current station into  
the preset memory.  
Quick tuning:  
Touch and hold the [X] or [x] key for more  
than 1 second to tune in a station.  
Step tuning:  
Touch the [X] or [x] key to manually tune in  
a station.  
Note:  
Manual tuning is cancelled if you do not operate  
the unit for 7 seconds.  
55  
MAX667VD  
TV Operations  
Auto store  
Auto store selects 6 TV stations automatically  
and stores each one into a preset memory. If 6  
stations cannot be received with good reception,  
previously stored station remain and only the  
strong stations are stored into memory.  
1. Touch the [Band] key to select the desired TV  
band. (TV1 or TV2)  
2. Touch the [List] key.  
3. Touch and hold the [AS] key for more than 2  
seconds.  
Setting the TV area  
When you select the TV area (TV reception  
area), the TV tuner area setting changes.  
1. Touch the screen to display the menu, then  
touch the [Option] key.  
2. Touch the [TV AREA] key to display a list of  
country name.  
3. Touch the [c] or [C] key to scroll the list.  
4. Touch the desired Country Name key to  
select a country.  
5. Touch the [Back] key to return to the previous  
A beep sounds and the stations with good  
reception are stored automatically to the  
preset channels.  
mode.  
Preset scan  
Preset scan shows each preset channel before it  
automatically advances to the next preset. This  
function is useful for searching for desired TV  
station in memory.  
1. Touch the screen to display the TV/VTR  
menu, then touch [List] key.  
2. Touch the [PS] key to start preset scan. The  
unit starts scanning each station for 7  
seconds sequentially.  
3. When the desired channel is received, touch  
the [PS] key again.  
Setting the TV diver  
You can change the reception setting for the TV  
antenna connected to the TV tuner.  
* Normally use the TV diver with the “ON” position.  
1. Touch the screen to display the TV/VTR  
menu, then touch the [Option] key.  
2. Touch the [ON] or [OFF] key of the TV DIVER  
item to turn this function on and off.  
[ON] :  
Sets reception emphasizing the visual.  
[OFF] :  
Sets the diver setting to OFF.  
3. Touch the [Back] key to return to the previous  
mode.  
56  
MAX667VD  
5.1 ch Surround Decoder Operations  
This function is available when an optional 5.1 ch  
Surround Decoder (DVH940) is connected.  
When the 5.1 ch Surround Decoder is connected  
through the CeNET cable, the 5.1 ch Surround  
Decoder Control unit (DVC920, optional) cannot  
be used.  
SPEAKER SEL (speaker selection)  
This function determines center speaker,  
surround speaker and sub woofer connection.  
3-1. Touch the []] key of the SPEAKER SEL item  
to show the submenu.  
3-2. Touch the [ON] or [OFF] key of the CENTER  
SP, SURROUND SP or SUB WOOFER item  
to turn speakers on or off, depending on  
what speakers are connected.  
5.1 ch Surround Decoder control  
function  
This section describes operation procedures of  
setting functions.  
For details on each function, refer to the owner’s  
manual supplied with the 5.1 ch Surround  
Decoder.  
• The factory default setting is “ON”  
• The phase of the “SUB WOOFER” is  
reversed in the “ON-” setting. The default  
value is “ON+”.  
Dolby PL II CONTROL  
* Requires an optional amplifier.  
* This function is available only when the MUSIC  
MODE is selected for Dolby PL II. For setup  
details, see “Selecting the Dolby PL II (Dolby  
Pro Logic II) type.  
Note:  
The 2-ZONE mode is disabled when the DVH940  
is connected.  
1. Pressthe[ADJ]buttonto displaytheADJUST  
menu.  
3-1. Touch the []] key of the Dolby PL II CONT.  
item to show the submenu.  
3-2. Perform setting for the PANORAMA,  
DIMENSION or CENTER WIDTH item.  
[PANORAMA]:  
Touch the [ON] or [OFF] key to select. “OFF”  
is the default value.  
[DIMENSION]:  
Touch the [[] or []] key to adjust the level  
between 0 and 6. The default level is “3”.  
2. Touch the [AUDIO EXT.] key.  
[CENTER WIDTH]:  
Touch the [[] or []] key to adjust the level  
between 0 and 7. The default level is “3”.  
3. Perform setting for the desired item.  
See the following sections for details.  
4. Touch the [Back] key to return to the previous  
screen.  
* In the following sections, only the details  
regarding settings are described, procedures  
to select setting items are skipped.  
57  
MAX667VD  
5.1 ch Surround Decoder Operations  
FILTER  
DELAY  
This function is used to select filter frequencies  
that suit the speakers that are used.  
* This function is not available for speakers whose  
This function adjusts the timing of the speakers  
so that they are synchronized with front speaker  
output.  
SPEAKER SEL setting is set to “OFF”.  
* This function is not available for speakers whose  
SPEAKER SEL setting is set to “OFF”.  
3-1. Touch the []] key of the FILTER item to  
show the submenu.  
3-1. Touch the []] key of the DELAY item to show  
the submenu.  
3-2. Touch the [[] or []] key of the FRONT HPF,  
CENTER HPF, SURROUND HPF or SUB  
WOOFER LPF item to adjust.  
3-2. Touch the [[] or []] key of the CENTER SP  
or SURROUND SP item to adjust.  
[FRONT HPF]:  
[CENTER SP]:  
Adjustments are made in the range from 0  
ms to 5 ms. The default value is “0 ms”.  
This function can be set to the following four  
settings: 50 Hz, 80 Hz, 120 Hz or THRGH  
(through). “THRGH” is the default value.  
[SURROUND SP]:  
Adjustments are made in the range from 0  
ms to 15 ms. The default value is “0 ms”.  
[CENTER HPF]:  
This function can be set to the following  
three settings: 50 Hz, 80 Hz and 120 Hz.  
120 Hz” is the default value.  
DRC  
This function sets the dynamic range  
compression.  
[SURROUND HPF]:  
This function can be set to the following four  
settings: 50 Hz, 80 Hz, 120 Hz or THRGH  
(through). “THRGH” is the default value.  
3-1. Touch the [C] key to display the next menu  
screen.  
3-2. Touch the [MAX], [STD] or [MIN] key of the  
DRC item to select respective item.  
* The default value is “MAX”.  
[SUB WOOFER LPF]:  
This function can be set to the following  
three settings: 50 Hz, 80 Hz and 120 Hz.  
120 Hz” is the default value.  
SPEAKER GAIN  
This function sets speaker output level.  
* This function is not available for speakers whose  
SPEAKER SEL setting is set to “OFF”.  
3-1. Touch the []] key of the SPEAKER GAIN  
item to show the submenu.  
3-2. Touch the [[] or []] key of the FRONT L,  
CENTER, FRONT R, SURROUND R,  
SURROUND L or SUB WOOFER item to  
adjust.  
Each item is adjustable in the range –10 dB  
to +10 dB in 1 dB step increments. The  
default value is “0 dB”.  
58  
MAX667VD  
5.1 ch Surround Decoder Operations  
Setting and storing P.EQ Properties  
DSF mode  
1. Press the [ADJ] button, and touch the  
[AUDIO] key.  
2. Touch the []] key of the P.EQ item to display  
DSF effect ON/OFF  
* The factory default setting is “OFF”.  
the submenu.  
1. Press the [ADJ] button, and touch the  
3. Touch the key for the desirable type to select.  
The P.EQ adjustment contents are as follows:  
[SIGNAL]:  
[AUDIO] key.  
This function selects “MUSIC” or “P. NOISE”.  
* The factory default setting is “P.NOISE”.  
[SPEAKER SELECT]:  
This function selects “FRONT”, “CENTER” or  
SURROUND”.  
* The factory default setting is “FRONT”.  
* This setting is disabled when both the  
CENTER SP and SURROUND SP items of the  
SPEAKER SEL setting are set to “OFF”.  
2. Touch the []] key of the STATUS item.  
3. Touch the [ON] or [OFF] key of the DSF item  
to set the function ON or OFF.  
* This function is not available for speakers  
whose SPEAKER SEL setting is set to “OFF”.  
4. Touch the [Back] key to return to the previous  
screen.  
[BAND]:  
Note:  
Select the channel to be compensated  
(“BAND1”, “BAND2”, “BAND3”).  
If the DSF effect is set to OFF, the adjustment  
made in “DSF” is not reflected in the music source.  
* The factory default setting is “BAND1”.  
[FREQUENCY]:  
Selecting the DSF type  
Select the center frequency that you want to  
compensate from the range of 18 Hz to  
20 kHz. (1/3 octave step, 31 points)  
1. Press the [ADJ] button, and touch the  
[AUDIO] key.  
2. Touch the []] key of the DSF item.  
3. Touch the key for the desirable type to select.  
* The factory default setting is “1 kHz”.  
[Q]:  
4. Touch the [Back] key to return to the previous  
Set the sharpness of the Q-curve to one of the  
parameters: 1, 3, 5, 7 and 20.  
* The factory default setting is “1”.  
screen.  
P.EQ mode  
[GAIN]:  
Adjust the gain (output level) in the range of  
–6 dB to +6 dB. (1 dB step, 13 points)  
* The factory default setting is “0”.  
P.EQ effect ON/OFF  
* The factory default setting is “OFF”.  
4. Touch the [Back] key to return to the previous  
1. Press the [ADJ] button, and touch the  
screen.  
[AUDIO] key.  
2. Touch the []] key of the STATUS item.  
3. Touch the [ON] or [OFF] key of the P.EQ item  
to set the function ON or OFF.  
4. Touch the [Back] key to return to the previous  
screen.  
Note:  
If the P.EQ effect is set to OFF, the adjustment  
made in “P.EQ” is not reflected in the music  
source.  
59  
MAX667VD  
5.1 ch Surround Decoder Operations  
Balance/Fader adjustment  
Selecting the Dolby PL II (Dolby Pro  
Logic II ) type  
3-1. Touch the []] key of the BAL/FAD item.  
Touch the [{] or [}] key to adjust the fader  
level.  
* The factory default setting is “OFF”.  
* This setting is disabled when both the CENTER  
SP and SURROUND SP items of the SPEAKER  
SEL setting are set to “OFF”.  
[{] key :  
emphasized the sound from the front  
speakers.  
1. Press the [ADJ] button, and touch the  
[AUDIO] key.  
[}] key :  
2. Touch the []] key of the Dolby PL II item.  
3. Touch the key for the desirable type to select.  
emphasized the sound from the rear  
speakers.  
4. Touch the [Back] key to return to the previous  
3-2. Touch the [[] or []] key to adjust the balance  
screen.  
level.  
Output adjustment of subwoofer  
volume, center volume and balance/  
fader  
[[] key :  
emphasized the sound from the left  
speakers.  
[]] key :  
emphasized the sound from the right  
speakers.  
1. Press the [ADJ] button, and touch the  
[AUDIO] key.  
2. Touch the []] key of the DETAIL item to  
display the submenu.  
3. Perform the following adjustments:  
4. Touch the [Back] key to return to the previous  
screen.  
Subwoofer volume adjustment  
3-1. Touch the [[] or []] key of the SUBWOOFER  
VOL item to adjust to desirable level (Setting  
range : –6 to 3).  
* The factory default setting is “0”.  
Center volume adjustment  
3-1. Touch the [[] or []] key of the CENTER VOL  
item to adjust to desirable level (Setting  
range : –6 to 0).  
* The factory default is “0”.  
60  
MAX667VD  
11.IN CASE OF DIFFICULTY  
GENERAL  
Problem  
Cause  
Measure  
Power does not turn Fuse is blown.  
on. (No sound is  
Replace with a fuse of the same amperage. If the  
fuse blows again, consult your store of purchase.  
produced.)  
Incorrect wiring.  
Consult your store of purchase.  
Nothing happens  
when buttons are  
pressed.  
The microprocessor has  
malfunctioned due to  
noise, etc.  
Turn off the power and open the operation panel.  
Press the [RESET] button for about 2 seconds  
with a thin rod.  
Note:  
Display is not  
accurate.  
When the [RESET] button is pressed, turn off the  
ACC power.  
[RESET] button  
* When the [RESET] button is pressed, frequencies  
of TV/radio stations, titles, etc. stored in memory  
are cleared.  
The remote control  
unit does not work.  
Direct rays of the sun fall on When direct rays of the sun fall on the light-  
the light-receptive part of  
the remote control unit.  
receptive part of the remote control unit, it may not  
work.  
The batteries of the remote Check the batteries of the remote control unit.  
control unit are dead or  
there is no battery in the  
remote control unit.  
DVD Player  
Problem  
Cause  
Measure  
Disc cannot be  
loaded.  
Another disc is already  
loaded.  
Eject the disc before loading the new one.  
There is a foreign matter  
already in place.  
Eject the foreign matter forcibly.  
Sound skips or is  
noisy.  
Compact disc is dirty.  
Clean the compact disc with a soft cloth.  
Compact disc is heavily  
scratched or warped.  
Replace with a compact disc with no scratches.  
Sound is bad directly Water droplets may form  
after power is turned on the internal lens when  
Let dry for about 1 hour with the power on.  
Check that the parking brake is engaged.  
on.  
the car is parked in a humid  
place.  
The image is not  
displayed.  
The parking brake is not  
engaged.  
Disc cannot play  
with the display  
PARENTAL  
The view is limited.  
Release the view limitation or change the parental  
level.  
See the subsection “Setting up the parental  
level”.  
VIOLATION” shown.  
61  
MAX667VD  
TV/VTR (When connecting an optional TV tuner, etc.)  
Problem  
Cause  
Measure  
The image is not  
displayed.  
The parking brake is not  
engaged.  
Check that the parking brake is engaged.  
The display is dark. The brightness control is  
too low.  
Adjust the brightness properly.  
The operating condition is The temperature inside the vehicle may be 0°C or  
not good.  
lower. Set to an appropriate temperature (25°C or  
so) and check it again.  
The headlight of the vehicle The display is made dark at night to prevent the  
is lit.  
glare (When the headlight of the vehicle is lit in the  
daytime, the display gets dark).  
The color of the  
display is light or a  
shade of color is not  
good.  
The color is not adjusted  
adequately.  
Check that Color and Hue are adjusted properly.  
When the VTR is  
connected, the  
Improper NTSC/PAL  
setting  
Set the NTSC/PAL properly according to the VTR.  
image is disturbed.  
When the TV tuner is Bad receiving condition  
connected, the  
image gets unclear.  
A radio wave may not reach sufficiently due to  
obstruction of mountains or buildings. Check it  
again at a place where a radio wave can be  
received properly.  
The TV tuner has a Bad receiving condition  
double or triple  
image.  
It may be under the influence of radio wave  
reflected by mountains or buildings. Check it again  
after changing place or direction.  
The TV tuner has  
spots or stripes in  
the image.  
Presence of jamming  
It may be under the influence from automobiles,  
streetcar, power cable, neon sign, and so forth.  
Check it again after changing place.  
There are red,  
green, and blue  
points in the display.  
This is not a failure, but a phenomenon peculiar to  
a liquid crystal panel (The liquid crystal panel is  
produced according to technology with very high  
precision. Note that, though there are effective  
pixels of 99.99% or more, pixel missing or  
normally lit pixels account for 0.01%).  
62  
MAX667VD  
12.ERROR DISPLAYS  
If an error occurs, one of the following displays is displayed.  
Take the measures described below to solve the problem.  
DVD Player  
Display  
ERROR 2  
Cause  
Measure  
A disc is caught inside the This is a failure of DVD deck’s mechanism and  
CD deck and is not ejected. consult your store of purchase.  
ERROR 3  
ERROR 6  
A disc cannot be played  
due to scratches, etc.  
Replace with a non-scratched, non-warped disc.  
A disc is loaded upside-  
down inside the DVD deck  
and does not play.  
Eject the disc then reload it properly.  
PARENTAL  
VIOLATION  
Parental level error  
Set the correct Parental level.  
WRONG REGION  
Region code error  
Eject the disc, and replace correct region code  
disc.  
DRM  
WMA files protected by  
DRM are played.  
Perform the operation such as skipping a file.  
(Scan, repeat and random playback mode may be  
canceled.)  
NOT SUPPORT  
Files not supported by this  
unit are played.  
CD Changer  
Display  
Cause  
Measure  
ERROR 2  
A disc inside the CD  
changer is not loaded.  
This is a failure of CD changer’s mechanism and  
consult your store of purchase.  
ERROR 3  
ERROR 6  
A disc inside the CD  
changer cannot be played  
due to scratches, etc.  
Replace with a non-scratched, nonwarped disc.  
A disc inside the CD  
changer cannot be played  
because it is loaded  
upside-down.  
Eject the disc then reload it properly.  
For the DVD changer, refer to the Owner’s Manual provided with the DVD changer.  
If an error display other than the ones described above appears, press the [RESET] button. If the  
problem persists, turn off the power and consult your store of purchase.  
* When the [RESET] button is pressed, frequencies of TV/radio stations, titles, etc. stored in memory are  
cleared.  
63  
MAX667VD  
13.SPECIFICATIONS  
FM Tuner  
Frequency Range: 87.00 MHz to 108.00 MHz  
Usable Sensitivity: 9 dBf  
LCD Monitor  
Screen Size: 7-inch wide type  
156.2 mm Width × 82.3 mm Height  
Display method:  
50dB Quieting Sensitivity: 15 dBf  
Alternate Channel Selectivity: 70 dB  
Stereo Separation (1 kHz): 32 dB  
Frequency Response ( 3 dB): 30 Hz to 15 kHz  
Transmission type TN liquid crystal display  
Drive method: TFT (thin-film transistor)  
active matrix driving  
Pixels: 336,960 (480 × 3 (RGB) × 234)  
AM Tuner  
Frequency Range: 531 kHz to 1629 kHz  
Usable Sensitivity: 28 dBµV  
General  
Power source voltage:  
14.4 V DC (10.8 to 15.6 V allowable)  
Ground: Negative  
Current consumption: 4.0 A (1 W)  
Auto Antenna Rated Current: 500 mA less  
Dimensions of the Main Unit:  
178 mm Width × 100 mm Height × 160 mm  
Depth  
Weight of the Main Unit: 2.6 kg  
Dimensions of the Remote Control Unit:  
54 mm Width × 28.8 mm Height × 155 mm  
Depth  
Weight of the Remote Control Unit:  
100 g (including battery)  
DVD Player  
System:  
Digital Versatile Disc System with CDDA  
capable  
Usable discs: DVD video disc, Compact disc  
Frequency Response:  
20 Hz to 20 kHz (CD) ( 1 dB)  
Signal to Noise Ratio: 100 dB (1 kHz)  
Dynamic Range: 100 dB (1 kHz)  
Distortion: 0.006%  
Audio Amplifier  
Maximum power output:  
200 W (50 W × 4)  
Rate Power Output:  
17 W × 4 (20 Hz to 20 kHz, 1%, 4 )  
Speaker impedance: 4 (4 to 8 )  
Input  
Audio input:  
130 60mVrms (High)  
600 80mVrms (Mid)  
840 100mVrms (Low)  
(input impedance 10 kor greater)  
Video input:  
100 mm  
171 mm  
178 mm  
Note:  
1.0 0.2 Vp-p (input impedance 75 )  
Specifications comply with JEITA Standards.  
Specifications and design are subject to change  
without notice for further improvement.  
Video Output  
Video output:  
1.0 0.2 Vp-p (output impedance 75 )  
64  
MAX667VD  
INSTALLATION AND WIRE  
CONNECTION MANUAL  
1. BEFORE STARTING  
1. This set is exclusively for use in cars with a  
negative ground 12 V power supply.  
2. Read these instructions carefully.  
3. Be sure to disconnect the battery “-” terminal  
before starting. This is to prevent short circuits  
during installation. (Figure 1)  
Car battery  
Figure 1  
2. PACKAGE CONTENTS  
1 Main unit  
2 Manuals  
6 Bag for accessories (No. 2)  
Rubber cap (for RCA pin cord)  
Owner’s manual & Installation manual  
7 Remote control unit  
3 Power supply lead  
4 Rca pin cord  
5 Bag for accessories (No. 1)  
Flat head screw (M5 × 8) ............................ 8  
Sems hexagonal bolt (M5 × 8) .................... 8  
Electro tap  
8 Battery  
(for remote control unit)  
9 Finisher  
3. GENERAL CAUTIONS  
1. Do not open the case. There are no user-  
serviceable parts inside. If you drop anything  
into the unit during installation, consult your  
dealer or an authorized Clarion service  
center.  
2. Use a soft, dry cloth to clean the case. Never  
use a rough cloth, thinner, benzine, or alcohol,  
etc. For tough dirt, apply a little cold or warm  
water to a soft cloth and wipe off the dirt  
gently.  
65  
MAX667VD  
4. CAUTIONS ON INSTALLATION  
1. Prepare all articles necessary for installing the  
main unit before starting.  
5. Use the included screws for installation. Using  
other screws can cause damage. (Figure 4)  
2. This model features an operation panel that  
slides forward.  
Chassis Chassis  
On some types of cars, the operation panel  
may make contact with the dashboard or shift  
lever, in which cause it cannot be installed.  
Before installing, check that the unit will not  
hamper operation of the shift lever or obstruct  
your view before selecting the installation  
location. (Figure 2)  
Damage  
Max. 8 mm (M5 screw)  
Figure 4  
6. This unit has a fan motor in the back of the  
main unit so as not to raise the temperature in  
the main unit. When the fan motor vent is  
covered with cords or mounting bracket, it  
may cause a malfunction. Be sure not to cover  
it when wiring cords. (Figure 5)  
Dashboard  
Shift lever  
(check that it does not  
touch the LCD.)  
Figure 2  
3. Install the unit within 30° of the horizontal  
plane. (Figure 3)  
Fan motor vent  
Figure 5  
Max. 30˚  
Figure 3  
4. If you have to do any modification on the car  
body, such as drilling holes, consult your car  
dealer beforehand.  
66  
MAX667VD  
5. INSTALLING THE MAIN UNIT  
This unit is designed for fixed installation in the  
dashboard.  
3. Reassemble and secure the unit in the  
dashboard and set the face panel and center  
panel.  
1. When installing the main unit in NISSAN  
vehicles, use the parts attached to the unit  
and follow the instructions in Figure 6.  
When installing the main unit in TOYOTA  
vehicles, use the parts attached to the vehicle  
and follow the instructions in Figure 7.  
2. Wire as shown in Section 7.  
Mounting Screw Holes (Side View of the Main Unit)  
For NISSAN vehicle  
For TOYOTA vehicle  
Installing the Main Unit in a NISSAN Vehicle  
6-Spacer (thickness: 1 mm)  
Main Unit  
Finisher (*1)  
6-Flat head screw  
(M5 X 8)  
(attached to the main unit)  
Mounting bracket  
(1 pair for the left and right sides)  
Figure 6  
Note:  
*1 Position the face panel with its wide edge at the  
bottom. Fit the edge into the groove of the main  
unit.  
67  
MAX667VD  
Installing the Main Unit in a TOYOTA Vehicle  
Install by using parts attached to the vehicle. (Screws marked are attached to the vehicle.)  
Main Unit  
8–Hexagonal screw  
(M5 × 8)  
Mounting bracket  
(1 pair for the left  
and right sides)  
Center Panel  
(* 2)  
* 3  
Figure 7  
Note:  
* 2 Some panel openings are too small for the unit  
depending on the vehicle type and model. In  
such a case, trim the upper and lower sides of the  
panel frame by about 0.5 to 1.5 mm so the unit  
can be inserted smoothly.  
*3 If a hook on the installation bracket interferes  
with the unit, bend and flatten it with a nipper or  
similar tool.  
Typical Mounting Brackets  
Example 1  
Example 2  
Example 3  
Affix the screws to the marks.  
Vehicles other than NISSAN and TOYOTA  
In some cases the center panel may require modification. (Trimming, filing, etc.)  
Removing the Main Unit  
When the main unit is to be removed, disassemble it in the reverse of the order in “INSTALLING THE  
MAIN UNIT”.  
68  
MAX667VD  
6. CAUTIONS ON WIRING  
1. Be sure to turn the power off before wiring.  
2. Be particularly careful where you route the  
wires.  
5. Connect the CeNET extension cable fully and  
securely until it locks. When the CeNET  
extension cable is pulled, hold the slide cap  
part and pull it towards you. (Figure 9)  
Keep them well away from the engine, and  
exhaust pipe, etc. Heat may damage the  
wires.  
* When the CeNET extension cable is extended  
or branches, use extension cable CCA-520  
(2.5 m) or CCA-521 (0.6 m), or Y-adapter  
CCA-519 (each of them is sold separately).  
3. If the fuse should blow, check to see if the  
wiring is correct.  
If a fuse is blown, replace it with a new one of  
the same amperage rating as the original  
(15A FUSE).  
CeNET terminal  
4. To replace the fuse, remove the old fuse of  
the power supply lead and insert the new one.  
(Figure 8)  
Slide cap  
CeNET cable  
(provided with the  
CD changer or  
Note:  
There are various types of fuse holder. Do not let  
the battery side touch other metal parts.  
DVD changer)  
caution  
Figure 9  
CAUTION  
After the connection, fix the lead by a clamp  
or insulation tape for protection.  
Fuse (15A FUSE)  
Fuse holder  
Figure 8  
69  
MAX667VD  
7. WIRE CONNECTION  
Note:  
• Before installing, be sure to disconnect the negative cable of the car battery.  
• In the optional devices, the RCA Pin and the Connector cable are separately-sold items.  
iPod  
Optical output terminal  
TV tuner input terminal  
DVD changer input terminal  
Connector cable  
Yellow  
CCD terminal  
(CCA-670-600)  
Radio  
antenna jack  
CeNET  
terminal  
Red  
4-Channel Amplifier  
Gray  
Right  
left  
Front audio output  
terminal  
White  
Red  
Black  
Right  
left  
Rear audio output  
terminal  
White  
Red  
Purple  
Gray  
Right  
left  
Non fader  
output terminal  
White  
Yellow  
Rear monitor  
Video output terminal  
Red  
Right  
Green  
(2-ZONE  
output terminal)  
Wireless  
Headphone  
Left  
(WH100/  
WH200)  
White  
Yellow  
Video  
VTR etc.  
White  
Red  
Black  
Red  
Visual input  
terminal  
Audio (left)  
Audio (right)  
70  
MAX667VD  
Yellow  
Black  
+12V main power  
Ground  
Purple  
Rear right +  
Purple/Black  
Red  
Rear right -  
+12V accessory  
Gray  
Front right +  
Gray/Black  
Front right -  
White  
Front left +  
White/Black  
Front left -  
Green  
Rear left +  
Green/Black  
Rear left -  
Blue/White  
Amplifier turn-on lead  
Orange/White  
Blue  
Illumination  
Auto antenna  
Brown  
Phone mute (*1)  
Grass-green  
Parking brake lead  
*1 Connecting the PHONE MUTE terminal  
The lead included with the unit must be connected to the specified  
position of the vehicle’s connector in order to use the “Triggered  
audio mute for cellular telephones” function.  
Connecting the parking brake lead  
Connect the lead to parking brake lamp ground in  
the meter panel.  
Parking brake lamp  
+ lead to battery  
Note:  
Connect these three leads.  
Connecting the parking brake lead to lamp ground  
allows you to watch TV/VTR/DVD video/video CD  
when the parking brake is engaged.  
When the parking brake lead is not connected, the  
monitor will not turn on.  
- cord  
parking  
brake sig-  
nal lead  
Parking brake lead  
(grass-green)  
Parking brake  
71  
MAX667VD  
Connecting the Accessories  
Connection to the external amplifier  
The external amplifier can be connected unless the 5.1 ch Surround Decoder is connected. For  
detailed information, refer to the instruction manual of the 5.1 ch Surround Decoder.  
Connection to the CCD camera for vehicle  
The CCD camera for vehicle can be connected to CCD terminal on the main unit. For detailed  
information, refer to the instruction sheet or manual for the CCD camera.  
Note:  
A power supply box (sold separately) is required for connection of the main unit and the CCD camera.  
The power supply box for the camera CAA147 cannot be used. Please use the CAA188 instead.  
If the specified lead of the cellular phone is connected to the phone mute lead of the main unit,  
the audio mute is available when the cellular phone is used.  
TV Tuner  
When the TV tuner is to be connected, connect the CeNET connector and RCA Pin (yellow). For  
detailed information, refer to the instruction manual of the TV tuner.  
iPod  
When you connect the iPod with video features by using the connector cable CCA-670-600, the video  
data stored in the iPod cannot be displayed on the display of this unit.  
Use the Clarion’s new connector cable which is released soon.  
72  
MAX667VD  
8. SAMPLE SYSTEM  
Yellow  
Yellow  
DVD A/C IN  
TV IN  
MAX667VD  
Front  
Speakers  
(Gray)  
RCA video cable  
(included the TV tuner)  
RCA cable  
(sold separately)  
Non fader  
output  
Rear  
Speakers  
CeNET cable  
(included  
the TV tuner)  
4-Channel  
Amplifier  
RCA cable  
(sold separately)  
TV Tuner  
(TTX754/TTX7504z)  
Center speaker  
built-in amplifier  
(SRK602)  
RCA cable  
Powered sub-woofer  
built-in amplifier  
(SRV303)  
CeNET cable  
(included the  
DVH940)  
(included  
the DVH940)  
RCA cable (sold separately)  
CeNET CD Changer  
(DCZ625/CDC655Tz)  
5.1 ch Surround  
Decoder  
(Black)  
(DVH940)  
CeNET Y-adapter  
(CCA-519-601,  
sold separately)  
Ferrite clamp  
(Included the  
DVD changer)  
CeNET Cable  
(included the Changer)  
CeNET DVD Changer  
(VCZ625)  
Set the [SLAVE/STAND ALONE]  
switch to the [SLAVE] position.  
STAND  
SLAVE  
ALONE  
(Gray)  
Digital optical fiber cable  
(DCA-005/008, sold separately)  
Set the [CeNET/STAND ALONE] switch  
to the [CeNET] position.  
STAND  
CeNET  
ALONE  
73  
MAX667VD  
74  
MAX667VD  
Clarion Co., Ltd.  
All Rights Reserved.Copyright © 2006: Clarion Co., Ltd.  
Printed in Japan /  
QZ-6070K  
280-8373-00  
/
2006/3 (Y-YI)  
/
Dicetak di Jepang  

Audiovox CDC TO2 User Manual
Canon E 700 User Manual
Canon GL2 User Manual
Clarion CAA 188 210 User Manual
FujiFilm Camera Lens YV4 3X2 8SA 2 User Manual
Gitzo GT2540G User Manual
Grindmaster 3342 User Manual
Jensen MP8610BT User Manual
JL Audio C2 650 02102009 User Manual
JVC CAMESCOPE GR FXM106S User Manual