Clarion DXZ668RMP User Manual

Owner’s manual

Mode d’emploi

Bedienungsanleitung

Istruzioni per l’uso

Gebruiksaanwijzing

Manual de instrucciones

Bruksanvisning

Manual de instruções

DXZ668RMP

CD/MP3/WMA RECEIVER / CeNET CONTROL

RÉCEPTEUR CD/MP3/WMA : COMMANDE CeNET

CD/MP3/WMA EMPFÄNGER/CeNET-STEUERUNG

LETTORE CD/MP3/WMA CON RICEVITORE/

CONTROLLO CeNET

CD/MP3/WMA RADIO/CeNET BEDIENING

RECEPTOR Y REPRODUCTOR DE CD/MP3/WMA/

CONTROL DE CeNET

CD/MP3/WMA-RECEIVER MED CeNET-KONTROLL

RECEPTOR DE CD/MP3/WMA/CONTROLO CeNET

Thank you for purchasing this Clarion product.

∗ Please read this owner’s manual in its entirety before operating this equipment.

∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).

∗ Check the contents of the enclosed warranty card and keep it carefully with this manual.

∗ This manual includes the operating procedures of the iPod interface, CD changer, DAB and TV

tuner connected via the CeNET cable. The iPod interface, CD changer and TV tuner have their

own manuals, but no explanations for operating them are described.

CAUTIONS:

OBS!

This appliance contains a laser system and

is classified as a “CLASS 1 LASER

Apparaten innehåller laserkomponenten

som avger laserstrålning överstigande

gränsen för laserklass 1.

PRODUCT”. To use this model properly,

read this Owner’s Manual carefully and keep

this manual for your future reference. In

case of any trouble with this player, please

contact your nearest “AUTHORIZED service

station”. To prevent direct exposure to the

laser beam, do not try to open the enclosure.

VAROITUS

Suojakoteloa si saa avata. Laite sisältää

laserdiodin, joka lähettää näkymätöntä

silmille vaarallista lasersäteilyä.

!CAUTION

USE OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER

THAN THOSE SPECIFIED IN THE OWNER’S

MANUAL MAY RESULT IN HAZARDOUS

RADIATION EXPOSURE.

ADVARSEL.

Denne mærking er anbragt udvendigt på

apparatet og indikerer, at apparatet arbejder

med laserstråler af klasse 1, hvilket betyder,

at der anvendes laserstråler af svageste

klasse, og at man ikke på apparatets

yderside kan blive udsat for utilladelig

kraftig stråling.

APPARATET BØR KUN ÅBNES AF

FAGFOLK MED SÆRLIGT KENDSKAB TIL

APPARATER MED LASERSTRÅLER!

Indvendigt i apparatet er anbragt den her

gengivne advarselsmækning, som advarer

imod at foretage sådanne indgreb i

apparatet, at man kan komme til at udsaætte

sig for laserstråling.

DXZ668RMP

Contents

1. PRECAUTIONS .............................................................................................................................. 3

Sloping Console .............................................................................................................................. 3

Handling Compact Discs ................................................................................................................. 4

2. CONTROLS .................................................................................................................................... 5

3. NOMENCLATURE .......................................................................................................................... 6

Names of the Buttons and Their Functions ..................................................................................... 6

Major Button Operations When External Equipment is Connected to This Unit .............................. 7

Display Items ................................................................................................................................... 9

4. DCP ................................................................................................................................................11

5. REMOTE CONTROL ..................................................................................................................... 12

Inserting the Battery ...................................................................................................................... 12

Functions of Remote Control Unit Buttons .................................................................................... 13

6. OPERATIONS ............................................................................................................................... 14

Basic Operations ........................................................................................................................... 14

Radio Operations ........................................................................................................................... 16

RDS Operations ............................................................................................................................ 18

CD/MP3/WMA Operations ............................................................................................................. 21

Operations Common to Each Mode .............................................................................................. 25

7. OPERATIONS OF ACCESSORIES .............................................................................................. 29

CD Changer Operations ................................................................................................................ 29

TV Operations ............................................................................................................................... 30

Digital Radio/DAB Operations ....................................................................................................... 31

8. IN CASE OF DIFFICULTY ............................................................................................................ 33

9. ERROR DISPLAYS ....................................................................................................................... 35

10. SPECIFICATIONS ......................................................................................................................... 36

1. PRECAUTIONS

1. This unit is applicable for on-road 4 wheel

Sloping Console

vehicle purpose only. Use for tractor, fork

truck, bulldozer, off road vehicle, 2 or 3

wheel motor bicycle, marine boat or other

special purpose vehicle is not appropriate.

This unit uses sloping console to make large-

screen displays possible.

When you use the sloping console, be sure to

close it.

2. When the inside of the car is very cold and

the player is used soon after switching on the

heater moisture may form on the disc or the

optical parts of the player and proper

playback may not be possible. If moisture

forms on the disc, wipe it off with a soft cloth.

CAUTION

BE CAREFUL NOT TO GET YOUR FINGERS

CAUGHT WHEN OPENING AND CLOSING

THE SLOPING CONSOLE.

If moisture forms on the optical parts of the

player, do not use the player for about one

1. For safety’s sake, always close the

hour. The condensation will disappear

SLOPING CONSOLE before leaving this unit

naturally allowing normal operation.

unused for a prolonged period or switching

3. Driving on extremely bumpy roads which

OFF the ignition key.

cause severe vibration may cause the sound

If you switch OFF the ignition key with the

to skip.

SLOPING CONSOLE tilted, the SLOPING

CONSOLE does not close.

INFORMATION FOR USERS:.

2. Before the SLOPING CONSOLE closes,

CHANGES OR MODIFICATIONS TO THIS

PRODUCT NOT APPROVED BY THE

MANUFACTURER WILL VOID THE

WARRANTY.

there may be a braking sound from the

safety mechanism. This is normal.

DXZ668RMP

3. If you move the SLOPING CONSOLE by

hand, this may create play. To correct this

play, with the power on for the unit, press the

[Q] button to close the SLOPING

CONSOLE.

when the SLOPING CONSOLE tries to

close, the safety mechanism is triggered and

the SLOPING CONSOLE returns to the open

state. If this happens, remove the

obstruction, then press the [Q] button.

4. After a disc is ejected, the SLOPING

CONSOLE automatically returns to the tilted

or closed state. If there is any obstruction

5. To avoid scratching the compact disk, keep

the 12 or 8 cm CD level when inserting or

removing them.

Handling Compact Discs

• Never play a compact disc with any

cellophane tape or other glue on it or with

peeling off marks. If you try to play such a

compact disc, you may not be able to get it

back out of the CD player or it may damage

the CD player.

• Do not use compact discs that have large

scratches, are misshapen, cracked, etc. Use

of such discs may cause misoperation or

damage.

Use only compact discs bearing the

mark.

Do not play heart-shaped, octagonal, or other

specially shaped compact discs.

Some CDs recorded in CD-R/CD-RW mode

may not be usable.

Handling

• Compared to ordinary music CDs, CD-R and

CD-RW discs are both easily affected by high

temperature and humidity and some of CD-R

and CD-RW discs may not be played.

• To remove a compact disc from its storage

case, press down on the center of the case

and lift the disc out, holding it carefully by the

edges.

Therefore, do not leave them for a long time in

the car.

• New discs may have some roughness around

the edges. If such discs are used, the player

may not work or the sound may skip. Use a

ball-point pen or the like to remove any

roughness from the edge of the disc.

• Do not use commercially available CD

protection sheets or discs equipped with

stabilizers, etc. These may damage the disc

or cause breakdown of the internal

mechanism.

Storage

• Do not expose compact discs to direct

sunlight or any heat source.

Ball-point pen

Roughness

• Do not expose compact discs to excess

humidity or dust.

• Do not expose compact discs to direct heat

from heaters.

Cleaning

• To remove fingermarks and dust, use a soft

cloth and wipe in a straight line from the

center of the compact disc to the

circumference.

• Never stick labels on the surface of the

compact disc or mark the surface with a pencil

or pen.

• Do not use any solvents, such as

commercially available cleaners, anti-static

spray, or thinner to clean compact discs.

• After using special compact disc cleaner, let

the compact disc dry off well before playing it.

Be sure to unfold and read the next page. / Veuillez déplier et vous référer à la page suivante.

Bitte ausbreiten und die nächste Seite lesen. / Assicurarsi di aprire e leggere la pagina successiva.

Volgende pagina uitvouwen en doorlezen a.u.b. / Cerciórese de desplegar y de leer la página siguiente.

Glöm inte att vika ut och läsa nästa sida. / Não deixe de abrir e ler a próxima página.

DXZ668RMP

CONTROLS / LES COMMANDES / REGLER / CONTROLLI

REGELAARS / CONTROLES / KONTROLLER / CONTROLOS

Main unit / Appareil principal / Hauptgerät / Apparecchio principale

Hoofdtoestel / Unidad principal / Huvudenhet / Unidade principal

[

]

ROTARY

[

]

ADJ

[

]

PHOTO SENSOR

[

]

[

]

[

]

RELEASE

[

[ ]

]

[ ]

[

]

A-M

[ ]

[

]

[ ]

[

]

DIRECT

[

]

SRC

[

]

IR RECEIVER

[

]

SCN

[

]

RPT

[

]

BND

[

]

RDM

[

], [ ]

UP DN

With the SLOPING CONSOLE opened / Ouvrez la CONSOLE RABATTABLE

ÖFFNUNG DER SCHRÄGKONSOLE / Apertura della CONSOLE INCLINATA

Met het KANTELEND BEDIENINGSPANEEL geopend / Apertura de la CONSOLA INCLINABLE

DEN LUTANDE KONSOLEN öppen / Com a CONSOLA INCLINÁVEL aberta

[

CD SLOT]

Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.

Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.

Hinweis: Bitte diese Seite ausfalten und beim Lesen der einzelnen Kapitel die Frontdiagramme beachten.

Nota: Assicurarsi di aprire questa pagina e fare riferimento a questi diagrammi quando si legge ciascun capitolo.

Opmerking: Vouw deze pagina uit en zie tevens de afbeeldingen van het voorpaneel tijdens het doorlezen van de volgende hoofdstukken.

Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.

Observera: Vik ut denna sida för att kunna se figurerna över bilstereons framsida medan du läser de olika kapitlen.

Nota: Certifique-se de abrir esta página e consulte os diagramas frontais conforme realiza a leitura de cada capítulo.

DXZ668RMP

3. NOMENCLATURE

Note:

• Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 5 (unfold).

Names of the Buttons and Their Functions

[D] button

[RELEASE] button

• Switch the display indication (Main display,

Spectrum analyzer display and CT (clock

time) display).

• Press and hold the button for 1 second or

longer (do not over 4 seconds) to enter the

display adjust mode.

• Press and hold the button for 4 seconds or

longer to turn off the display while in the

usual play.

• Deeply push in the button to unlock the DCP.

[ADJ] button

• Use the button to switch to the adjustment

mode or RDS adjustment mode (in Radio

FM/DAB mode).

[ROTARY] knob

• Adjust the volume by turning the knob

clockwise or counterclockwise.

• Use the knob to perform various settings.

[IR RECEIVER]

• Receiver for remote control unit. (Operating

range: 30˚ in all directions)

[

] button

• Perform preset scan while in the radio mode.

When the button is pressed and held, auto

store is performed.

• Play or pause a CD while in the CD/MP3/

WMA mode.

[BND] button

• Switch the band, or seek tuning or manual

tuning while in the radio mode.

• Play a first track while in the CD/MP3/WMA

mode.

• Confirm various settings.

• Press the button to change the character.

[Q] button

[UP], [DN] buttons

• Press to open the SLOPING CONSOLE and

insert a CD into the CD SLOT.

• Press to eject a CD loaded in the unit.

• Select the folder while in the MP3/WMA mode.

[DIRECT] buttons

• Store a station into memory or recall it

directly while in the radio mode.

[PHOTO SENSOR]

•

This sensor detects the brightness inside your

car. When the auto-dimmer function is set to

“AUTO”, the brightness of the display is

dimmed according to the brightness detected

by this sensor.

[RDM] button

• Perform random play while in the CD/MP3/

WMA mode.

• Press and hold the button for 1 second or

longer to perform folder random play while in

the MP3/WMA mode.

[Z] button

•

Use the button to select one of the 3 types of

sound characteristics already stored in memory.

[RPT] button

• Repeat play while in the CD/MP3/WMA mode.

• Press and hold the button for 1 second or

longer to perform folder repeat play while in

the MP3/WMA mode.

[C] button

• Button’s color change to multicolor.

• Press and hold the button for 1 second or

longer to go into the user color adjustment.

[SCN] button

[T] button

• Perform scan play for 10 seconds of each

track while in the CD/MP3/WMA mode.

• Press and hold the button for 1 second or

longer to perform folder scan play while in the

MP3/WMA mode.

• Use the button to input a title in the CD

mode.

• Use the button to switch the user titles or

track titles, etc. while in the CD/MP3/WMA

mode.

• Use the button to scroll the title during the

CD-text play, while in the CD/MP3/WMA

mode.

DXZ668RMP

Names of the Buttons and Their Functions

[SRC] button

[å, ∂] lever

• Press the button to turn on the power.

Press and hold the button for 1 second or

longer to turn off the power.

• Switch the operation mode among the radio

mode, etc.

•

Select a station while in the radio mode or

select a track while in the CD/MP3/WMA mode.

This lever is used to make various settings.

Press the lever upward or downward and hold

in position for 1 second or longer to enter the

fast-forward or fast-backward mode.

[TA] button

• Use the button to set the TA (Traffic

Announcement) standby mode.

[CD SLOT]

• CD insertion slot.

[A-M] button

• Use the button to switch to the audio mode

(bass/treble, balance/fader)

• Press and hold for 1 second or longer to turn

on or off the MAGNA BASS EXTEND mode.

Major Button Operations When External Equipment is

Connected to This Unit

[BND] button

• Move the next disc in increasing order.

●When the CD/DVD changer /

iPod interface is connected

∗ For details, see the section “CD Changer

Operations”. For the DVD changer, refer

to the Owner’s Manual provided with the

DVD changer. For the iPod interface, refer

to the Owner’s Manual provided with the

iPod interface.

[UP], [DN] buttons

• Select the disc.

[RDM] button

• Perform random play. Also perform disc

random play when the button is pressed and

held.

∗ Hereinafter, “iPod interface” is abbreviated

as iPod BB.

[RPT] button

• Perform repeat play. When this button is

pressed and held, disc repeat play is

performed.

[

] button

• Play or pause a CD, DVD or iPod BB.

[T] button

[SCN] button

• Press the button, switches the user titles or

track titles, etc. while in the CD changer

mode.

• Use the button to input a title in the CD

changer mode.

• Use the button to scroll the title during CD-text

play.

• Perform scan play for 10 seconds of each

track. Disc scan play is performed when the

button is pressed and held.

[å, ∂] lever

• Select a track when listening to a disc.

• Press the lever upward or downward and hold

in position for 1 second or longer to enter the

fast-forward or fast-backward mode.

DXZ668RMP

Major Button Operations When External Equipment is Connected to This Unit

Regarding iPod BB (EA-1251E)

The iPod BB allows connection of an iPod that

can then be operated in the same way as a 6

disc CD changer.

… iPod photo (images cannot be displayed).

* See your iPod Owner’s manual regarding

what software version is supported by your

iPod.

• When an iPod is connected to the iPod BB,

subsequent operations are as performed

from the main unit.

Notes:

• Scan play cannot be performed with the iPod

BB.

• In order to operate the iPod like a 6-disc CD

changer, a playlist must be constructed

beforehand.

• When connecting the iPod BB and CD changer,

set the address switch on the side of the CD

changer to “2”.

• For other precautions, consult the iPod BB

Owner’s manual.

• Not all iPod functions can be controlled from

the main unit.

• iPod models usable with the iPod BB include

models supporting the following software

versions:

… iPod 3rd generation software Ver. 2.2 or

later.

… iPod 4th generation software Ver. 3.0.1 or

later.

• “iPod” is a trademark of Apple Computer, Inc.,

registered in the U.S. and other countries.

… iPod mini software Ver. 1.2 or later.

[BND] button

• Switch the band.

• When the button is pressed and held, switch

seek tuning or manual mode.

●When the TV/DAB is connected

∗ For details, see the section “TV

Operations” or “Digital Radio/DAB

Operations”.

[DIRECT] buttons

• Store a station into memory or recall it directly.

[ADJ] button

• Press and hold the button for 1 second or

longer to switch to the TV picture mode or

VTR (external) picture mode.

[TA] button

• Use the button to set the TA (Traffic

Announce-ment) standby mode in the DAB

mode. (This function is only DAB tuner.)

[

] button

• Perform preset scan while in the TV mode.

When the button is pressed and held, auto

store is performed. (This function is only TV

tuner.)

[å, ∂] lever

• Select a station.

• Perform service scan while in the DAB mode.

DXZ668RMP

Display Items

Background indication

• Motion image (1 pattern), wallpaper (5 patterns) (Page 25)

• Demo mode with screen saver (Page 25)

Operation status indication

Titles, Spectrum analyzer,

CT (clock time) are displayed.

■Displayed when changing

source

DAB

: DAB indication

INFO : Information indication for DAB

A-VOL : AUTO VOL indication

: MAGNA BASS EXTEND indication

: Z-ENHANCER 1, 2, 3

TUNER : Radio mode

: ST (radio only), MP3, WMA indication

DAB

: DAB mode

MANU : Manual indication

CD/MP3 : CD/MP3 mode

: Alternative frequency indication

CD A/C1 : CD changer (iPod BB)

REG

: Regional indication

mode

: Traffic announcement indication

: Traffic programme indication

: Programme type indication

* When connecting iPod

BB.

CD A/C1 : CD changer mode

PTY

(2, 3, 4)

DVD A/C : DVD changer mode

: TV mode

VTR

AUX

: VTR mode

: AUX mode

ACCESORY : Accesory mode

TELEPHONE : Telephone mode

DXZ668RMP

Display Items

Displays icon corresponding

to playback or selection.

Operation status indication

Band / disc No. /

folder No. indication

Preset channel /

track No. indication

Receiving frequency or

channel / play time indication

Items within parentheses ( ) are displayed during

operation as the “Operation status indication”.

■ Displayed when changing titles

USER

: Radio / TV user title

: CD user title

• P.SCAN (PRESET SCN) : Preset scan

• AS (AUTO STORE)

• S.SCAN (S-SCAN)

: Auto store

PS NAME : RDS PS name

PTY NAME : RDS PTY name

S-LABEL : DAB S-LABEL

: Service scan

• SCAN (TRACK SCAN) : Track scan

• RPT (TRACK RPT)

• RDM (TRACK RDM)

: Track repeat

: Track random

DISC

: CD-TEXT disc title

: CD-TEXT artist title

: CD-TEXT track title

ARTIST

TRACK

• D.SCAN (DISC SCAN) : Disc scan

• D.RPT (DISC RPT)

• D.RDM (DISC RDM)

: Disc repeat

: Disc random

FOLDER : MP3 folder name

TRACK

ALBUM

ARTIST

TITLE

: MP3 file name

: MP3 album tag

: MP3 artist tag

: MP3 title tag

• SCAN (CHAPTER SCN) : Chapter scan

• RPT (CHAPTER RPT) : Chapter repeat

• T.RPT (TITLE RPT)

: DVD title repeat

• F.SCAN (FOLDER SCN) : Folder scan

• F.RPT (FOLDER RPT) : Folder repeat

• F.RDM (FOLDER RDM) : Folder random

■ Example of spectrum analyzer

display (Page 25)

Spectrum analyzer display-1

Spectrum analyzer display-2

DXZ668RMP

4. DCP

The control panel can be detached to prevent

theft. When detaching the control panel, store it

in the DCP (DETACHABLE CONTROL PANEL)

case to prevent scratches.

Attaching the DCP

1. Insert the DCP so that the A section on the

right side of the DCP catches on the hook B

on the unit.

We recommend taking the DCP with you when

leaving the car.

Removing the DCP

1. With the SLOPING CONSOLE closed, turn

off the power.

2. Press the [RELEASE] button deeply to open

the DCP.

[RELEASE] button

2. Press the left side C of the DCP carefully to

fit it in place.

3. Pull the DCP toward you and remove it.

CAUTION

• The DCP can easily be damaged by

shocks. After removing it, be careful not to

drop it or subject it to strong shocks.

• If the [RELEASE] button is pressed and the

DCP is not locked into place, it may fall out

from vibration of the car. This can break

the DCP, so after removing it, either install

it on the unit or put it in its DCP case.

DCP

• The connector connecting the unit and the

DCP is an extremely important part. Be

careful not to damage it by pressing on it

with fingernails, screwdrivers, etc.

CAUTION

• Always close the SLOPING CONSOLE

before removing the DCP.

• If you remove the DCP with the SLOPING

CONSOLE open, the SLOPING CONSOLE

closes immediately. Be careful not to get

your fingers caught.

Note:

• If the DCP is dirty, wipe off the dirt with a soft, dry

cloth only.

DXZ668RMP

5. REMOTE CONTROL

Signal transmitter

[

]

[

]

SRC

BND

]

[

], [

]

[

], [

]

[

MUTE

DISP

[

]

PTY

[

]

[

]

PS/AS

Inserting the Battery

1 Turn over the remote control unit and slide the cover

in the direction indicated by the arrow in the

illustration.

2 Insert the battery (CR2025) into the insertion guides,

with the printed side (+) facing upwards.

3 Press the battery in the direction indicated by the

arrow so that it slides into the compartment.

4 Replace the cover and slide in until it clicks into

place.

Insertion guide

Notes:

Misuse may result in rupture of the battery, producing

leakage of fluid and resulting in personal injury or

damage to surrounding materials. Always follow these

safety precautions:

• Use only the designated battery .

• When replacing the battery, insert properly, with +/–

polarities oriented correctly.

• Do not subject battery to heat, or dispose of in fire or

water. Do not attempt to disassemble the battery.

• Dispose of used batteries properly.

DXZ668RMP

Functions of the Remote Control Unit Buttons

CD changer

DVD changer

iPod BB

Mode

Radio (RDS) /DAB

CD/MP3/WMA

Button

[SRC]

Switches among radio, DAB, iPod BB, CD/MP3/WMA, CD changer, DVD changer, TV and

AUX. Press to cancel a traffic announcement broadcast, an emergency broadcast, and a

PTY broadcast during a TA, ALARM or PTY interrupt.

Returns to the first

track.

Moves the next disc

in increasing order.

Switches reception

band.

Switches reception

band.

[BND]

Increases and decreases volume (in all modes).

[

] , [

]

Moves preset

channels up and

down.

Moves tracks up and down.

Moves preset

channels up and

down.

[

]

When pressed and held for 1 second or

longer:

Fast-forward/fast-rewind.

No function.

Switches between playback and pause.

No function.

[

]

Turns mute on and off.

TA on and off.

[MUTE]

[TA]

Press to cancel a traffic announcement broadcast during a TA interrupt.

[DISP]

Switches among main display, spectrum analyzer display and CT (clock time) display.

When pressed and held for 1 second or longer: Switches the titles (except in the DVD

changer, TV mode).

[PS/AS]

Scan play.

Preset scan.

Scan play.

Preset scan.

When pressed and

held for 1 second or

longer: Disc scan

play.

When pressed and

held for 2 seconds or

longer: Auto store.

held for 2 seconds or held for 1 second or

longer:

Auto store.

longer:

Folder scan play

(MP3/WMA mode).

* Cannot operate via

iPod BB.

[AF]

Repeat play.

AF function on and

off.

When pressed and

held for 1 second or

longer:

Repeat play.

No function.

When pressed and

held for 1 second or

longer: Disc repeat

play.

When pressed and

held for 1 second or

longer:

Folder repeat play

REG function on and (MP3/WMA mode).

off

Press to cancel an emergency broadcast during an ALARM interrupt.

[PTY]

Random play.

PTY mode on and

off.

Random play.

Switches between TV

and VTR.

When pressed and

held for 1 second or

longer: Disc random

play.

When pressed and

held for 1 second or

longer:

Folder random play

(MP3/WMA mode).

Press to cancel a PTY broadcast during a PTY interrupt.

∗ Some of the corresponding buttons on the main unit and remote control unit have different functions.

DXZ668RMP

6. OPERATIONS

Note:Be sure to read this chapter referring to the front diagrams of

Basic Operations

chapter “2. CONTROLS” on page 5 (unfold).

Adjusting the volume

CAUTION

1. Press the front part of the [ROTARY] knob.

The knob will pop up.

Be sure to lower the volume before

switching off the unit power or the ignition

key. The unit remembers its last volume

setting. If you switch the power off with the

volume up, when you switch the power back

on, the sudden loud volume may hurt your

hearing and damage the unit.

2. Turning the [ROTARY] knob clockwise

increases the volume; turning it

counterclockwise decreases the volume.

∗ The volume level is from 0 (minimum) to 33

(maximum).

Switching the display

Turning on/off the power

Press the [D] button to select the desired display.

Note:

● When the power is turned on.

• Be careful about using this unit for a long time

without running the engine. If you drain the car’s

battery too far, you may not be able to start the

engine and this can reduce the service life of the

battery.

1. Each time you press the [D] button, the

display switches in the following order:

• Main display

1. Press the [SRC] button.

2. The illumination and display on the unit light

up. The unit automatically remembers its last

operation mode and will automatically switch

to display that mode.

• Spectrum analyzer display

3. Press and hold the [SRC] button for 1 second

or longer to turn off the power for the unit.

Note:

• The first time this unit is turned on after the wire

connections are completed, it must be checked

what equipment is connected. When the power is

turned on, “SYSTEM CHECK” appears in the

display. The system check starts within the unit.

When the system check is complete, press the

[SRC] button again.

• CT(clock time) display

Selecting a mode

1. Press the [SRC] button to change the

operation mode.

2. Press and hold the [D] button for 4 seconds

or longer to turn off the display while in the

usual play. And press the button to return to

the previous mode.

2. Each time you press the [SRC] button, the

operation mode changes in the following

order:

∗ Once selected, the preferred display becomes

the display default. When a function

adjustment such as volume is made, the

screen will momentarily switch to that

function’s display, then revert back to the

preferred display several seconds after the

adjustment.

Radio mode ➜ DAB mode ➜ CD/MP3/WMA

mode ➜ CD changer (iPod BB) mode ➜ CD

changer mode ➜ DVD changer mode ➜ TV

mode ➜ AUX mode ➜ Radio mode...

∗ External equipment not connected with

CeNET is not displayed.

∗ For information on how to enter a title, refer to

the subsection “Entering titles” in section

“Operations Common to Each Mode”.

∗ If AUX is set in AUX/TEL, AUX mode can be

selected.

∗ When CT data is not received, “––:––CT”

appears in the display.

DXZ668RMP

Basic Operations

Setting the Z-Enhancer

This unit are provided with 3 types of sound

tone effects stored in memory. Select the one

you prefer.

Adjusting the treble

1. Press the [A-M] button and select “TREB 0”.

2. Turn the [ROTARY] knob to adjust the treble.

TREBLE : –6 to 6 (The factory default

∗ The factory default setting is “OFF”.

setting is “0”)

Each time you press the [Z] button, the tone

effect changes in the following order:

3. When the adjustment is complete, press the

[A-M] button several times until the function

mode is reached.

“OFF” ➜ “BASS BOOST” ➜ “IMPACT” ➜

“EXCITE” ➜ “OFF” ...

• BASS BOOST : bass emphasized

Adjusting the balance

1. Press the [A-M] button and select

“BALANCE 0”.

• IMPACT

: bass and treble

emphasized

• EXCITE

: bass and treble

emphasized mid

deemphasized

2. Turning the [ROTARY] knob clockwise

emphasizes the sound from the right

speaker; turning it counterclockwise

emphasizes the sound from the left speaker.

• OFF

: no sound effect

∗ The factory default setting is “0”. (Adjustment

range: L13 to R13)

Adjusting the tone

Press the [A-M] button and select the item to

adjust. Each time you press the [A-M] button,

the item changes as following order:

3. When the adjustment is complete, press the

[A-M] button several times until the function

mode is reached.

●When “BASS BOOST” is set

Adjusting the fader

1. Press the [A-M] button and select “FADER 0”.

“BALANCE 0” ➜ “FADER 0” ➜ Last

function mode.

●When “IMPACT” is set

2. Turning the [ROTARY] knob clockwise

emphasizes the sound from the front

speakers; turning it counterclockwise

emphasizes the sound from the rear

speakers.

“BALANCE 0” ➜ “FADER 0” ➜ Last

function mode.

●When “EXCITE” is set

“BALANCE 0” ➜ “FADER 0” ➜ Last

function mode.

∗ The factory default setting is “0”. (Adjustment

range: F12 to R12)

●When “OFF” is set

3. When the adjustment is complete, press the

[A-M] button several times until the function

mode is reached.

“BASS 0” ➜ “TREB 0” ➜ “BALANCE 0” ➜

“FADER 0” ➜ Last function mode.

Note:

Adjusting the bass

• During A-M adjustment mode, if no operation is

performed for more than 7 seconds, this mode

can be cancelled and return to previous mode.

1. Press the [A-M] button and select “BASS 0”.

2. Turn the [ROTARY] knob to adjust the bass.

BASS : –6 to 7 (The factory default setting

is “0”)

3. When the adjustment is complete, press the

[A-M] button several times until the function

mode is reached.

DXZ668RMP

Basic Operations

Radio Operations

Adjusting MAGNA BASS EXTEND

The MAGNA BASS EXTEND does not adjust

the low sound area like the normal sound

adjustment function, but emphasizes the deep

bass sound area to provide you with a dynamic

sound.

Listening to the radio

1. Press the [SRC] button and select the radio

mode. The frequency or PS and PTY appears

in the display.

∗ PS: Programme service name

∗ PTY: Programme type

1. Press and hold the [A-M] button for 1 second

or longer to turn on the MAGNA BASS

EXTEND effect.

2. Press the [BND] button and select the radio

band. Each time the button is pressed, the

radio reception band changes in the following

order:

2. Press and hold the [A-M] button for 1 second

or longer to turn off the MAGNA BASS

EXTEND effect.

F1 (FM1) ➜ F2 (FM2) ➜ F3 (FM3) ➜ A (MW/

LW) ➜ F1 (FM1)...

∗ The factory default setting is off.

3. Press the [å, ∂] lever upward or

downward to tune in the desired station.

CT (Clock Time) function

The CT function receives CT data sent from an

RDS station and displays the time.

∗ If a CT data is not being received, “––:––CT”

Tuning

There are 3 types of tuning mode available,

seek tuning, manual tuning and preset tuning.

appears in the display.

Note:

Seek tuning

There are 2 types of seek tuning: DX SEEK and

LOCAL SEEK.

• CT data is not transmitted in some countries and

by some broadcast stations. Also, in some areas,

the CT may not display accurately.

DX SEEK can automatically tune in to

receivable broadcast stations; LOCAL SEEK

can tune in to only broadcast stations with a

good reception sensitivity.

1. Press the [BND] button and select the

desired band (FM or AM (MW, LW)).

2. Tune into a station.

∗ If “MANU” is lit in the display, press and hold

the [BND] button for 1 second or longer.

“MANU” in the display goes off and seek

tuning is now available.

∗ If “TA” is lit in the display, TP stations are

automatically sought.

●DX SEEK

Press the [å, ∂] lever upward or downward

to start automatic station tuning.

When the lever is pressed upward, search will

be performing in the direction of higher

frequencies. When the lever is pressed

downward, search will be performed in the

direction of lower frequencies.

∗ When seek tuning starts, “DX SEEK” appears in

the display.

DXZ668RMP

Radio Operations

●LOCAL SEEK

Manual memory

If the lever is pressed upward or downward and

held in position for 1 second or longer, local

seek tuning will be enabled. Broadcast stations

with good reception sensitivity are selected.

∗ When local seeking starts, “LO SEEK” appears in

the display.

1. Select the desired station with seek tuning,

manual tuning or preset tuning.

2. Press and hold one of the [DIRECT] buttons

for 2 seconds or longer to store the current

station into preset memory.

Auto store

Manual tuning

There are 2 ways available: Quick tuning and

step tuning.

Auto store is a function for storing up to 6

stations that are automatically tuned in

sequentially. If 6 receivable stations cannot be

received, a previously stored station remains

unoverwritten at the memory position.

When you are in the step tuning mode, the

frequency changes one step at a time. In the

quick tuning mode, you can quickly tune the

desired frequency.

1. Press the [BND] button and select the

desired band (FM or AM (MW/LW)).

1. Press the [BND] button and select the

2. Press and hold the [

] button for 2

desired band (FM or AM (MW/LW)).

seconds or longer. The stations with good

reception are stored automatically to the

preset channels.

∗ If auto store is performed in the FM bands, the

stations are stored in FM3 even if FM1 or FM2

was chosen for storing stations.

∗ If “MANU” is not lit in the display, press and

hold the [BND] button for 1 second or longer.

“MANU” is lit in the display and manual tuning

is now available.

2. Tune into a station.

●Quick tuning:

Press the [å, ∂] lever upward or

downward and hold in position for 1 second

or longer to begin station tuning.

Preset scan

Preset scan receives the stations stored in

preset memory in order. This function is useful

when searching for a desired station in memory.

●Step tuning:

Press the [å, ∂] lever upward or

1. Press the [

2. When a desired station is tuned in, press the

] button again to continue receiving that

station.

Note:

• Be careful not to press and hold the [

] button.

downward to perform manual tuning.

∗ If no operation is performed for more than 7

seconds, manual tuning is cancelled and the

display returns to the previous mode.

[

] button

for 2 seconds or longer, otherwise the auto store

function is engaged and the unit starts storing

stations.

Recalling a preset station

A total of 24 preset positions (6-FM1, 6-FM2, 6-

FM3, 6-AM) exists to store individual radio

stations in memory. Pressing the corresponding

[DIRECT] button recalls the stored radio

frequency automatically.

1. Press the [BND] button and select the

desired band (FM or AM (MW/LW)).

2. Press the corresponding [DIRECT] button to

recall the stored station.

∗ Press and hold one of the [DIRECT] buttons

for 2 seconds or longer to store that station

into preset memory.

DXZ668RMP

RDS Operations

∗ If the reception of the current broadcast station

deteriorates, “PI SEARCH” appears in the display

and the radio searches for the same programme

on another frequency.

RDS (Radio Data System)

This unit has a built-in RDS decoder system that

supports broadcast stations transmitting RDS data.

This system can display the name of the

broadcast station being received (PS) and can

automatically switch to the broadcast station

with the best reception as you move long

distances (AF switching).

●AF function between RDS and DAB

When the same programme is broadcasted by

both RDS and DAB, and this function is ON, the

unit switches to receive the broadcast with the

better reception automatically.

Also, if a traffic announcement or programme

type is broadcast from an RDS station, no matter

what mode you are in, this broadcast is received.

∗ This function only operates when the DAH923 or

DAH913 DAB unit, sold separately, is connected.

∗ This factory default setting is “ON”.

Additionally, if EON information is received, this

information enables automatic switching of other

preset stations on the same network and

interruption of the station being received with

traffic information from other stations (TP). This

function is not available in some areas.

1. Press the [ADJ] button to switch to the

adjustment selection display.

2. Press the [å, ∂] lever upward or

downward to select “ LINK ACT”.

3. Turn the [ROTARY] knob to select “ON” or

“OFF”.

When using the RDS function, always set the

radio to FM mode.

● ON:

AF switching between DAB and RDS enabled.

• AF

• PS

• PTY

• EON

• TP

: Alternative Frequency

: Programme Service Name

: Programme Type

: Enhanced Other Network

: Traffic Programme

● OFF:

AF switching between DAB and RDS disabled.

4. Press the [ADJ] button to return to the

previous mode.

∗ RDS interrupt does not function during AM radio

reception or in TV mode.

REG (Regional programme) function

When the REG function is ON, the optimum

regional station can be received. When this

function is OFF, if the regional station area

switches as you drive, a regional station for that

region is received.

∗ When set receives RDS signal, and can read PS

data, PS appears in the display.

AF function

The AF function switches to a different

frequency on the same network in order to

maintain optimum reception.

∗ The factory default setting is “OFF”.

Notes:

• This function is disabled when a national station

such as BBC R2 is being received.

• The REG function ON/OFF setting is valid when

the AF function is ON.

1. Press and hold the [ADJ] button for 1 second

or longer to switch to the RDS adjustment

selection display.

∗ The factory default setting is “ON”.

1. Press and hold the [ADJ] button for 1 second

or longer to switch to the RDS adjustment

selection display.

2. Press the [å, ∂] lever upward or

downward to select “ AF”.

3. Turn the [ROTARY] knob to select “ON” or

2. Press the [å, ∂] lever upward or

“OFF”.

downward to select “ REG”.

●ON:

3. Turn the [ROTARY] knob to select “ON” or

“AF” in the display lights and AF function

turns on.

“OFF”.

●ON:

●OFF:

“REG” in the display lights and REG function

“AF” in the display goes off and AF function

turns on.

turns off.

●OFF:

4. Press the [ADJ] button to return to the

“REG” in the display goes off and REG

function turns off.

previous mode.

4. Press the [ADJ] button to return to the

previous mode.

DXZ668RMP

RDS Operations

Manually tuning a regional station

Auto store function for TP stations

You can automatically store up to 6 TP stations into

preset memory. If the number ofTP can be received

less than 6, broadcast stations already stored in

memory and left without being overwritten.

in the same network

1. This function is valid when the AF function is

ON and the REG function is OFF.

Note:

As “TA” lit in the display, press and hold the

• This function can be used when a regional

broadcast of the same network is received.

[

] button for 2 seconds or longer. The TP

stations with the good reception sensitivity are

stored into preset memory.

2. Press any one of the [DIRECT] buttons to

call out the regional station.

∗ Even if you select FM1 or FM2, a TP station is stored

into memory for FM3.

3. If the reception condition of the called out

station is bad, press the [DIRECT] button of

the same number. The unit receives a local

station on the same network.

PTY

This function enables you to listen to a

broadcast of the selected programme type even

if the unit is on a function mode other than radio.

TA (Traffic Announcement)

In the TA standby mode, when a traffic

announcement broadcast starts, the traffic

announcement broadcast is received as top

priority regardless of the function mode so you

can listen to it. Traffic programme (TP)

automatic tuning is also possible.

∗ Some countries do not yet have PTY broadcast.

∗ In the TA standby mode, a TP station has priority

over a PTY broadcast station.

∗ The factory default setting is “OFF”.

1. Press and hold the [ADJ] button for 1 second

or longer to switch to the RDS adjustment

selection display.

∗ This function can only be used when “TP” is lit in

the display. When “TP” is lit, this means that the

RDS broadcast station being received has traffic

announcement programmes.

2. Press the [å, ∂] lever upward or

downward to select “ PTY”.

●Setting the TA standby mode

3. Turn the [ROTARY] knob to select “ON” or

If you press the [TA] button when only “TP” is lit

in the display, “TP” and “TA” light in the display

and the unit is set into the TA standby mode

until a traffic announcement is broadcast. When

a traffic announcement broadcast starts, “TRA

INFO” appears in the display. If you press the

[TA] button while a traffic announcement

broadcast is being received, the traffic

announcement broadcast reception is cancelled

and the unit goes into the TA standby mode.

“OFF”.

●ON:

“PTY” in the display lights and PTY standby

mode is turned on. When the selected PTY

broadcast starts, the PTY item name

appears in the display.

●OFF:

“PTY” in the display goes off and PTY

standby mode is cancelled.

4. Press the [ADJ] button to return to the

●Cancelling the TA standby mode

previous mode.

As “TP” and “TA” lit in the display, press the [TA]

button. The “TA” in the display goes off and the

TA standby mode is cancelled.

∗ If “TP” is not lit, pressing the [TA] button searches

for a TP station.

●Cancelling a PTY interrupt broadcast

Press the [TA] button during the PTY interrupt

broadcast, the PTY interrupt is cancelled and

the unit returns to PTY standby mode.

●Searching for a TP station

When “TP” is not lit, if you press the [TA] button,

“TA” in the display lights and the unit

automatically receives a TP station.

Selecting PTY

1. Press and hold the [ADJ] button for 1 second

or longer to switch to the RDS adjustment

selection display.

Note:

• If a TP station is not received, the unit continues

the search operation. Pressing [TA] button again

goes off “TA” in the display and stops TP station

searching.

2. Press the [å, ∂] lever upward or

downward to select “ PTY SEL

”.

3. Press the [

] button.

DXZ668RMP

RDS Operations

4. Press any one of the [DIRECT] buttons.

Alternatively, turn the [ROTARY] knob to

select the desired PTY.

PTY item

Contents

ENGLISH

News

5. Press the [ADJ] button to return to the

Affairs

Info

Today’s events

Information

Sports

previous mode.

∗ Below are the factory default settings stored

for the [DIRECT] buttons.

Sport

Educate

Drama

Education

Drama

PTY item

Preset

number

ENGLISH

News

Contents

Culture

Science

Varied

Culture

News

Science

Info

Information

Pop Music

Variety

Pop M

Sport

Pop M

Pop music

Rock music

Easy music

Light music

Classics

Other music

Weather

Finance

Sport

Rock M

Easy M

Light M

Classics

Other M

Weather

Finance

Children

Social

Classics

Easy M

Serious Classical Music

Easy Listening Music

∗ The PTY select mode is cancelled

automatically 7 seconds after a PTY is

selected.

PTY seek

1. Press and hold the [ADJ] button for 1 second

or longer to switch to the RDS adjustment

selection display.

For children

Social

Religion

Phone In

Travel

Religion

2. Press the [å, ∂] lever upward or downward

Phone in

Travel

to select “ PTY SEL

”.

3. Press the [

] button.

Leisure

Jazz

Leisure

4. Press the [å, ∂] lever upward to search

for a PTY broadcast in the direction of higher

frequencies; press the lever downward to

search in the direction of lower frequencies.

Jazz

Country

Nation M

Oldies

Country

Nation music

Oldies

∗ If no station with the selected PTY broadcast

can be received, the unit returns to the PTY

select mode.

Folk M

Document

Folk music

Documentaries

PTY preset memory

1. Press and hold the [ADJ] button for 1 second

or longer to switch to the RDS adjustment

selection display.

Emergency broadcast

If an emergency broadcast is received, all the

function mode operations are stopped. “Alarm !”

appears in the display and the emergency

broadcast can be heard.

2. Press the [å, ∂] lever upward or

downward to select “ PTY SEL

”.

3. Press the [

] button.

●Cancelling an emergency broadcast

4. Turning the [ROTARY] knob to select the

If you press the [TA] button, emergency

broadcast reception is cancelled.

desired PTY.

The 29 types of PTY below can be selected.

5. If you press and hold any one of the

[DIRECT] buttons for 2 seconds or longer,

the selected PTY is stored into that preset

channel memory.

DXZ668RMP

RDS Operations

CD/MP3/WMA Operations

Switching the PTY display language

You can select one of 4 languages (English,

German, Swedish or French) for the PTY

displayed in the display.

MP3/WMA

What is MP3?

MP3 is an audio compression method and

classified into audio layer 3 of MPEG standards.

This audio compression method has penetrated

into PC users and become a standard format.

∗ The factory default setting is “ENGLISH”.

1. Press the [ADJ] button to switch to the

adjustment selection display.

This MP3 features the original audio data

compression to about 10 percent of its initial

size with a high sound quality. This means that

about 10 music CDs can be recorded on a CD-

R disc or CD-RW disc to allow a long listening

time without having to change CDs.

2. Press the [å, ∂] lever upward or

downward to select “ LANGUAGE”.

3. Turn the [ROTARY] knob to select the

desired language.

4. Press the [ADJ] button to return to the

previous mode.

What is WMA?

WMA is the abbreviation of Windows Media

Audio, an audio file format developed by

Microsoft Corporation.

Volume setting of TA, emergency

broadcast (Alarm) and PTY

The volume for TA, Alarm and PTY interrupts

can be set during TA, Alarm or PTY interrupt.

Notes:

• If you play a file with DRM (Digital Rights

Management) for WMA remaining ON, no audio

is output. (The WMA indicator blinks.)

• Windows Media™, and the Windows ® logo are

trademarks, or registered trademarks of Microsoft

Corporation in the United States and/or other

countries.

∗ The factory default setting is “15”.

During a TA, Alarm or PTY interrupt, turn the

[ROTARY] knob to set the volume to the desired

level (0 to 33).

∗ When the TA, Alarm or PTY interrupt ends, the

volume returns to the level it had before the

interrupt.

●To disable DRM (Digital Rights Management):

1. When using Windows Media Player 8, click

on TOOLS ➜ OPTIONS ➜ COPY MUSIC

tab, then under COPY SETTINGS, unclick

the check box for PROTECT CONTENT.

Then, reconstruct files.

2. When using Windows Media Player 9, click

on TOOL ➜ OPTIONS ➜ MUSIC RECORD

tab, then under Recording settings, unclick

the Check box for RECORD PROTECTED

MUSIC. Then, reconstruct files.

Personally constructed WMA files are used

at your own responsibility.

Precautions when creating MP3/

WMA disc

● Usable sampling rates and bit rates:

1. MP3: Sampling rate 11.025 kHz-48 kHz,

Bit rate: 8 kbps-320 kbps / VBR

2. WMA: Bit rate 48 kbps-192 kbps

● File extensions

1. Always add a file extension “.MP3” or

“.WMA” to MP3 or WMA file by using single

byte letters. If you add a file extension other

than specified or forget to add the file

extension , the file cannot be played.

DXZ668RMP

CD/MP3/WMA Operations

2. Files without MP3/WMA data will not play.

The indication “––:––” appears in the play

time display if you attempt to play files

without MP3/WMA data.

2. After making these settings, remove the disc

and then reinsert it.

3. When a mixed mode CD is loaded and CD is

set, the track to be played first is MP3/WMA

file data and no sound is heard.

● Logical format (File system)

1. When writing MP3/WMA file on a CD-R disc or

CD-RW disc, please select “ISO9660 level 1, 2

or JOLIET or Romeo” as the writing software

format. Normal play may not be possible if the

disc is recorded on another format.

Note:

• When playing a CCCD (Copy Control CD), set the

setting to CD type. When this is set to MP3/WMA

type, the CD cannot be played normally in some

cases.

2. The folder name and file name can be displayed

as the title during MP3/WMA play but the title

must be within 64 single byte alphabetical letters

and numerals (including an extension).

Backup Eject function

1. Press the [Q] button. The SLOPING

CONSOLE opens and a CD ejects. “EJECT”

appears in the display.

3. Do not affix a name to a file inside a folder

having the same name.

CAUTION

● Folder structure

Be careful not to get your fingers caught

when opening and closing the SLOPING

CONSOLE.

1. A disc with a folder having more than 8

hierarchical levels will be impossible.

● Number of files or folders

2. Remove the CD and press the [Q] button to

1. Up to 255 files can be recognized per folder.

Up to 500 files can be played.

close the SLOPING CONSOLE.

Notes:

2. Tracks are played in the order that they were

recorded onto a disc. (Tracks might not always

be played in the order displayed on the PC.)

• Be sure to close the SLOPING CONSOLE after

removing the CD.

•

The SLOPING CONSOLE closes automatically 30

seconds after removing the CD.

3. Some noise may occur depending on the type

of encoder software used while recording.

•

If a CD (12 cm) is left in the ejected position for 15

seconds, the CD is automatically reloaded. (Auto

reload)

Multisession function

When a disc contains both normal CD type tracks

and MP3/WMA type tracks mixedly, you can

select which type of the recorded tracks to play.

•

8 cm CDs are not auto reloaded. Be sure to remove

it when ejected.

If you force a CD into before auto reloading, this can

damage the CD.

● Default value is “CD”.

Each time you press and hold the [BND] button for

1 second or longer, the mixed mode is switched

between CD type or MP3/WMAtype. The following

indication appears in the title display when switching

the track type to be played.

Listening to a disc already loaded

in the unit

Press the [SRC] button to select the CD/MP3/

WMA mode.

When the unit enters the CD/MP3/WMA mode,

play starts automatically.

● Display when CD type

M-SESS CD

track is selected:

If there is no disc loaded, the indication “NO

DISC” appears in the title display.

∗ The mode changes each time the [SRC] button is

pressed. (Modes are not displayed for equipment

that is not connected.)

● Display when MP3/WMA

type track is selected:

M-SESS MP3

1. Types of recording that can be played are as

follows.

Radio ➜ (DAB) ➜ CD/MP3/WMA ➜ (CD

changer (iPod BB)) ➜ (CD changer) ➜

(DVD changer) ➜ (TV) ➜ AUX ➜ Radio...

Setting

Set to CD

Set to MP3/WMA

Disc

Mixed with CD and

MP3/WMA type tracks

Play CD

Play MP3/WMA

CD type track only Play CD

Play CD

MP3/WMA type track only Play MP3/WMA Play MP3/WMA

DXZ668RMP

CD/MP3/WMA Operations

Note:

Loading a CD

• If the CD playing is not a CD-text CD or no user

title has been input, “ ” appears in the display.

• If MP3/WMA disc is not input TAG, “ ” appears

in the display.

• For MP3, supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0.

• Tag displays give priority to V2.3 / 2.2

1. Press the [Q] button. The SLOPING

CONSOLE opens.

2. Insert a CD into the center of the CD SLOT

with the labeled side facing up. The CD plays

automatically after loading.

Notes:

• In the case of album Tags for WMA, the

information written into the extension header is

displayed.

• Never insert foreign objects into the CD SLOT.

• If the CD is not inserted easily, there may be

another CD in the mechanism or the unit may

require service.

• Only ASCII characters can be displayed in Tags.

Selecting a track

• Discs not bearing the

mark and

●Track-up

CD-ROMs cannot be played by this unit.

• Some CDs recorded in CD-R/CD-RW mode may

not be usable.

1. Press the [å, ∂] lever upward to move

to the beginning of the next track.

Loading 8 cm compact discs

∗ No adapter is required to play an 8 cm CD.

2. Each time the [å, ∂] lever is pressed

upward, playback proceeds to another track

in the advancing direction.

∗

Insert the 8 cm CD into the center of the insertion slot.

●Track-down

1. Press the [å, ∂] lever downward to

CAUTION

Be careful not to catch your hand or fingers

while closing the SLOPING CONSOLE.

move the beginning of the current track.

2. Press the [å, ∂] lever downward twice

to move to the beginning of the previous

track.

3. After loading a CD, the SLOPING CONSOLE

closes automatically.

Notes:

Fast-forward/fast-backward

•

Note that SLOPING CONSOLE closes immediately

after a CD is inserted into CD insertion slot.

●Fast-forward

Press the [å, ∂] lever upward and hold in

• If no CD is loaded in the SLOPING CONSOLE, it

closes after 30 seconds.

position for 1 second or longer.

●Fast-backward

Press the [å, ∂] lever downward and hold in

Pausing play

position for 1 second or longer.

1. Press the [

] button to pause play.

∗ For MP3/WMA disc, it takes some time until the start

of searching and between tracks. In addition, the

playing time may have a margin of error.

“PAUSE” appears in the display.

2. To resume CD play, press the [

again.

] button

Folder Select

This function allows you to select a folder

containing MP3/WMA files and start playing

from the first track in the folder.

Displaying CD titles

This unit can display title data for CD-text/MP3/

WMA disc and user titles input with this unit.

1. Press the [DN] or [UP] button.

1. Press the [D] button to display the title.

Press the [DN] button to move the previous

folder.

2. Each time you press the [T] button, the title

display changes in the following order:

Press the [UP] button to move the next folder.

● CD-TEXT disc

User title (disc) ➜ CD-text title (disc) ➜ Artist

name ➜ CD-text title (track) ➜ User title

(disc)...

● MP3/WMA disc

Folder ➜ Track ➜ Album TAG ➜ Artist TAG ➜

Title TAG ➜ Folder...

DXZ668RMP

CD/MP3/WMA Operations

●Folder repeat play

This function allows you to play a track currently

being played in the MP3/WMA folder repeatedly.

Root folder

1. Press and hold the [RPT] button for 1 second

or longer to perform folder repeat play.

“F.RPT” appears in the display.

●Random play

This function allows you to play all tracks

recorded on a disc in a random order.

1. Press the [RDM] button to perform random

play.

“RDM” appears in the display.

●Folder random play

This function allows you to play all the tracks of

all the folders recorded on an MP3/WMA disc in

a random order.

∗ Press the [UP] button while in the final folder

to shift to the first folder.

∗

Folder without an MP3/WMA file is not selectable.

1. Press and hold the [RDM] button for 1

second or longer to perform folder random

play.

2. To select a track, press the [å, ∂] lever

upward or downward .

“F.RDM” appears in the display.

Top function

The top function resets the CD player to the first

track of the disc. Press the [BND] button to play

the first track (track No. 1) on the disc.

●To cancel play

1. Press the operating button previously

selected.

∗ In case of MP3/WMA, the first track of a folder being

played will be returned.

Other various play functions

●Scan play

This function allows you to locate and play the first

10 seconds of all the tracks recorded on a disc.

1. Press the [SCN] button to perform scan play.

“SCAN” appears in the display.

∗ Scan play starts from the next track after the

track currently being played.

●Folder scan play

This function allows you to locate and play the

first 10 seconds of the first track of all the

folders on an MP3/WMA disc.

1. Press and hold the [SCN] button for 1

second or longer to perform folder scan play.

“F.SCAN” appears in the display.

∗ Folder scan play starts from the next folder

after the folder currently being played.

●Repeat play

This function allows you to play the current track

repeatedly.

1. Press the [RPT] button to perform repeat play.

“RPT” appears in the display.

DXZ668RMP

Operations Common to Each Mode

3-1. Turn the [ROTARY] knob to select the setting.

To change display setting

Each time you turn the [ROTARY] knob,

the setting changes in the following order:

1. Press and hold the [D] button for 1

second or longer to switch to the

adjustment selection display.

“HIGH” ➜ “MID” ➜ “LOW”

●Setting the speed of the spectrum

analyzer

This function allows you to adjust the speed of

the spectrum analyzer.

2. Press the [å, ∂] lever upward or

downward to select the “item name”.

“BGV” ↔ “S-A PTN”↔ “S-A SENS” ↔

“S-A SPEED” ↔ “POWER MSG”↔

“SCRN SVR” ↔ “MSG INPUT” ↔

“AUTO SCRL” ↔ “DIMMER IN” ↔

“DIMMER”

∗ The factory default setting is “HIGH”

2-1. Select “ S-A SPEED”.

3-1. Turn the [ROTARY] knob to select the

setting.

3. Turn the [ROTARY] knob to select the

Each time you turn the [ROTARY] knob,

the setting changes in the following order:

“desired setting value”.

∗ In the case of item names appearing with

the “PUSH ENT” suffix, after the item name,

“HIGH” ➜ “MID” ➜ “LOW”

the [

] button must be pressed to display

●Setting the power message display

When the unit is powered on or off, a message

is displayed.

the setting value.

∗ After completing settings, press the [D]

button to return to the previous mode.

The user can turn this message display “ON” or

“OFF”.

●Setting the background vision

The background vision includes 5 wallpaper

images and 1 motion pictures.

∗ The factory default setting is “ON”.

2-1. Select “ POWER MSG”

3-1. Turn the [ROTARY] knob to select “ON” or

Choose “SCAN” to automatically display all the

wallpaper.

“OFF”.

●Turning the screen saver function on

or off

∗ The factory default setting is “SCAN”.

2-1. Select “ BGV”.

This unit is provided with the screen saver

function which allows you to show various kinds

of patterns and characters in the operation

status indication area of the display in a random

order. You can turn on or off this function.

3-1. Turn the [ROTARY] knob to select the setting.

Each time you turn the [ROTARY] knob,

the setting changes in the following order:

“SCAN” ➜ “MOVIE” ➜ “WALL 1” ➜

“WALL 2” ➜ “WALL 3” ➜ “WALL 4” ➜

“WALL 5” ➜ “OFF”

If the button operation is performed with the

screen saver function on, the operation display

corresponding to the button operation is shown

for about 30 seconds and the display returns to

the screen saver display.

●Setting the spectrum analyzer pattern

∗ The factory default setting is “PTN 1”

2-1. Select “ S-A PTN”.

∗ The factory default setting is “DEMO”.

3-1. Turn the [ROTARY] knob to select the

2-1. Select “ SCRN SVR”.

setting.

3-1. Turn the [ROTARY] knob to select the setting.

Each time you turn the [ROTARY] knob, the

setting changes in the following order:

Each time you turn the [ROTARY] knob,

the setting changes in the following order:

“PTN 1” ➜ “PTN 2”

“OFF” ➜ “MSG INFO” ➜ “DEMO”

●Setting the sensitivity of the spectrum

analyzer

●Entering MESSAGE INFORMATION

Message up to 30 characters long can be stored

in memory and displayed for any mode.

This function allows you to adjust the sensitivity

of the spectrum analyzer.

∗ The factory default setting is “MID”

∗ The factory default setting is “Welcome to

Clarion”.

2-1. Select “ S-A SENS”.

DXZ668RMP

Operations Common to Each Mode

2-1. Select “ MSG INPUT

3-1. Press the [ ] button.

”.

●Setting the dimmer control

You can set the dimmer control “ON” or “OFF”.

∗ The factory default setting is “ON”.

3-2. Press the [å, ∂] lever upward or

2-1. Select “ DIMMER”.

downward to move the cursor.

3-1. Turn the [ROTARY] knob to select “ON” or

3-3. Press the [BND] button to select a

character. Each time you press the [BND]

button, the character changes in the

following orders:

“OFF”.

To change other settings

Capital letters ➜ Small letters ➜ Numbers/

Symbols ➜ Umlaut ➜ Capital letters…

1. Press the [ADJ] button to switch to the

adjustment selection display.

3-4. Turn the [ROTARY] knob to select the

desired character.

2. Press the [å, ∂] lever upward or

downward to select the “item name”.

3-5. Repeat step 3-2 to 3-4 to enter up to 30

characters for message.

Each time the [å, ∂] lever is pressed

up/down, the item display changes in the

following order:

3-6. Press and hold the [

] button for 2

seconds or longer to store the message in

memory and cancel input message mode.

∗ Press and hold the [BND] button for 1 second

or longer to cancel the input message. Then

press and hold the [

“BLINK LED” ↔ “AMP CANCEL” ↔

“LINK ACT” ↔ “LANGUAGE” ↔

“AUX/TEL” ↔ “AUX SENS” ↔ “TEL-

SP” ↔ “TEL-SW” ↔ “CALIBRATE” ↔

“A-VOL” ↔ “SYSTEM”

] button for 2 seconds

or longer to store the message and the

message return to default setting.

3. Turn the [ROTARY] knob to select the

“desired setting item”.

∗ After completing settings, press the [ADJ]

button to return to the previous mode.

●Setting the method for title scroll

Set how to scroll in CD-TEXT, MP3/WMA title.

∗ The factory default setting is “ON”.

2-1. Select “ AUTO SCRL”.

●Anti-theft indicator

3-1. Turn the [ROTARY] knob to select “ON” or

The red Anti-theft indicator is a function for

preventing theft. When the DCP is removed

from the unit, this indicator blinks.

“OFF”.

• ON:

To scroll automatically.

∗ The factory default setting is “OFF”.

• OFF:

2-1. Select “ BLINK LED”.

To scroll just 1 time when the title was

changed or the [T] button was pressed for

1 second or longer.

3-1. Turn the [ROTARY] knob to select “ON” or

“OFF”.

●Setting the external amplifier

∗ The factory default setting is “OFF”.

Note:

• User title can’t scroll.

2-1. Select “ AMP CANCEL”.

●Setting the auto-dimmer

3-1. Turn the [ROTARY] knob to select “ON” or

This function allows you to dim the lighting of

the display matched to the illumination or the

brightness inside your vehicle.

“OFF”.

• ON:

∗ The factory default setting is “AUTO”.

Use with connected AMP.

• OFF:

2-1. Select “ DIMMER IN”.

3-1. Turn the [ROTARY] knob to select “AUTO”

Use with inside AMP.

or “ILLUMI”.

●Selecting AUX/TEL

• AUTO:

You can listen to sounds and music from

external devices or your telephone calls from

the speakers when connected to this unit.

Interlocked to the brightness inside your

vehicle.

• ILLUMI:

When TEL INT or External device is connected to

this unit, you can select TEL mode or AUX mode.

∗ The factory default setting is “AUX”.

Interlocked to the illumination inside your

vehicle.

DXZ668RMP

Operations Common to Each Mode

2-1. Select “ AUX/TEL”.

• ON:

3-1. Turn the [ROTARY] knob to select “AUX” or

You can listen to your telephone calls from

the speakers connected to this unit.

“TEL”.

∗ When listening to your calls on your car

speakers, you can adjust the volume by

turning the [ROTARY] knob.

• AUX :

AUX/TEL input cable is for external Audio

input.

• MUTE:

• TEL :

The sound from this unit is muted during

telephone calls.

AUX/TEL input cable is for cellular phone

audio input.

●Setting auto volume

2-1. Select “ CALIBRATE

●Selecting AUX IN sensitivity

Make the following settings to select the

sensitivity when sounds from external devices

connected to this unit are difficult to hear even

after adjusting the volume.

”.

3-1. Press the [

displayed.

] button and “START” is

3-2. Keep driving speed 50km/h and press the

] button.

[

∗ The factory default setting is “MID”.

3-3. “CALIBRATION” is flush for 2 seconds in

2-1. Select “ AUX SENS”.

display.

3-1. Turn the [ROTARY] knob to select “LOW”,

3-4. If calibration is successful display indicate

“SUCCESSFUL”, or if calibration is not

successful display indicate “FAILED”.

“MID” or “HIGH”.

●Setting the car speaker output for the

cellular phone

∗ The factory default setting is “RIGHT”.

3-5. If you failed, repeat steps 3-1 to 3-4.

Note:

• When installing this device or transferring it into

another vehicle, for the sake of safety, always

have this work done by the store of purchase or

your nearest Clarion dealer. Installation requires

specialized techniques and experience.

∗ To output the telephone calls, set the cellular phone

interrupt to ON.

2-1. Select “ TEL-SP”.

3-1. Turn the [ROTARY] knob to select “RIGHT”

or “LEFT”.

• RIGHT:

●Setting auto volume sensitivity

2-1. Select “ A-VOL”.

Telephone calls can be heard on the front

right speaker connected to this unit.

3-1. Turn the [ROTARY] knob to make the

• LEFT:

adjustment.

Telephone calls can be heard on the front

left speaker connected to this unit.

The adjustment steps are below 6 steps,

“LOW” ➜ “MID-LOW” ➜ “MID” ➜

“MID-HIGH” ➜ “HIGH” ➜ “OFF”

●Cellular phone interrupt setting

If you connect this unit and your cellular phone with

a separately sold cable, you can listen to your

telephone calls on your car speakers.

Note:

• As calibration is successful display and

“SUCCESSFUL” lights up in the display,

“A-VOL” can be selected.

∗ The factory default setting is “OFF”.

2-1. Select “ TEL-SW”.

●Performing a system check

3-1. Turn the [ROTARY] knob to select the

setting. Each time you turn the [ROTARY]

knob, the setting changes in the following

order:

2-1. Select “ SYSTEM

”.

3-1. Press and hold the [

second or longer.

] button for 1

“SYSTEM CHECK” appears in the display,

then the unit returns to the previous

operation mode.

“OFF” ➜ “ON” ➜ “MUTE” ➜ “OFF”...

• OFF:

This unit continues normal operation even

when the cellular phone is used.

Note:

• If connecting a hands-free kit, please ensure the

setting is ON to receive the telephone audio

through the system.

DXZ668RMP

Operations Common to Each Mode

Setting the button illumination

Press the [C] button to select a color type. Each

time you press the [C] button, the type changes

in the following orders:

Entering titles

Titles up to 9 characters long can be stored in

memory and displayed for CD, CD changer and

TV stations. The number of titles that can be

entered for each mode are as follows.

“COLOR SCAN” ➜ “IndigoBlue” ➜ “SurfBlue”

➜ “SilkyWhite” ➜ “AquaGreen” ➜

“FreshGreen” ➜ “LeafGreen” ➜ “WarmAmber”

➜ “PassionRed” ➜ “VividPink” ➜ “PalePink”

➜ “DarkViolet” ➜ “PurePurple” ➜ “USER 1” ➜

“USER 2” ➜ “USER 3” ➜ “COLOR SCAN” ...

Mode

CD mode

TV mode

Number of titles

50 titles

20 titles

CD changer mode

DCZ628 connected

CDC655Tz connected

Number of titles

100 titles

●Setting COLOR SCAN mode

As selecting “COLOR SCAN”, the color

automatically changes.

100 titles

1. Press the [SRC] button to select the mode

you want to enter a title (CD, CD changer or

TV).

∗ The factory default setting is “COLOR SCAN”.

∗ After 3 seconds the color changes to the other.

●Setting USER mode

2. Select and play a CD in the CD changer or

tune in to a TV station for which you want to

enter the title.

The factory default setting is “RED 8” (red),

“GREEN 8” (green), “BLUE 8” (blue).

As selecting “USER 1, 2, 3”, press and hold the

[C] button for 1 second or longer to enter the

setting.

3. Press the [D] button and display the main

display.

4. Press and hold the [T] button for 1 second or

1. Press the [å ∂] lever upward or downward

longer.

to select “ RED 8

”

➜

“

GREEN 8

”

➜

“

5. Press the [å, ∂] lever upward or

BLUE 8”.

downward to move the cursor.

2. Turn the [ROTARY] knob to select from 0 to 8.

6. Press the [BND] button to select a character.

Each time you press the [BND] button, the

character changes in the following order:

3. Press and hold the [ ] button for 2

seconds or longer to store the color in

memory and cancel setting mode.

Capital letters ➜ Small letters ➜ Numbers/

Symbols ➜ Umlaut ➜ Capital letters...

7. Turning the [ROTARY] knob to select the

COLOR

RED

(red)

GREEN BLUE

desired character.

(green)

(blue)

IndigoBlue

SurfBlue

8. Repeat steps 5 to 7 to enter up to 9

characters for the title.

9. Press and hold the [

] button for 2

SilkyWhite

AquaGreen

FreshGreen

LeafGreen

WarmAmber

PassionRed

VividPink

seconds or longer to store the title into

memory and cancel title input mode.

Clearing titles

1. Select and play a CD in the CD changer or

tune in to a TV station for which you want to

clear the title.

PalePink

2. Press the [D] button and display the main

DarkViolet

PurePurple

USER 1

USER 2

USER 3

display.

3. Press and hold the [T] button for 1 second or

longer to switch to the title input display.

4. Press and hold the [BND] button for 1

second or longer.

5. Press and hold the [

] button for 2

seconds or longer to clear the title and

cancel title input mode.

DXZ668RMP

7. OPERATIONS OF ACCESSORIES

CD Changer Operations

Note:

Notes:

• The following operations are the same as for CD

mode:

∗ Pause

∗ Track selection

∗ Fast-forward/fast-backward

∗ Scan play

• If the CD playing is not a CD-text CD or no user

title has been input, “ ” appears in the display.

• If a CD-text CD is not input its disc title or a track

title, “ ” or “ ” appears in the display.

Procedure to scroll a title

Set “AUTO SCROLL” to “ON” or “OFF”.

∗ Repeat play

∗ Random play

See “CD/MP3/WMA Operations” (page 21-24) for

details.

(The factory default setting is “ON”. Refer to the

subsection “Setting the method for title scroll”

in section “Operations Common to Each

Mode”.)

CD changer functions

●When set to “ON”

When an optional CD changer is connected

through the CeNET cable, this unit controls all

CD changer functions. This unit can control a

total of 2 changers.

The title is automatically kept scrolling.

●When set to “OFF”

To scroll just 1 time when the title was changed or

the [T] button was pressed for 1 second or longer.

Note:

• User title can’t scroll.

Press the [SRC] button and select the CD

changer mode to start play. If 2 CD changers

are connected, press the [SRC] button to select

the CD changer for play.

Selecting a CD

∗ If “NO MAG” appears in the display, insert the

magazine into the CD changer. “DISC CHECK”

appears in the display while the player loads

(checks) the magazine.

The [DN] or [UP] button correspond to a disc

load in the magazine.

Press the [DN] or [UP] button to select the

desired disc.

∗ If a CD is not loaded in a slot of magazine, “NO

DISC” appears in the display.

∗ If “NO DISC” appears in the display, eject the

magazine and insert discs into each slot. Then,

reinsert the magazine back into the CD changer.

Note:

• Some CDs recorded in CD-R/CD-RW mode may

not be usable.

Other various play functions

●Disc scan play

Disc scan play locates and plays the first 10

seconds of the first track on each disc in the

currently selected CD changer. This function

continues automatically until it is cancelled.

CAUTION

CD-ROM discs cannot be played from every

CD changer, it’s depended on the model.

∗ Disc scan play is useful when you want to select a

desired CD.

Displaying CD titles

1. Press and hold the [SCN] button for 1

second or longer. “D.SCAN” appears in the

display and disc scan play starts.

This unit can display title data for CD-text CDs

and user titles input with this unit.

1. Press the [D] button to display the title.

2. Each time you press the [T] button, the title

display changes in the following order:

User title (disc) ➜ CD-text title (disc) ➜ Artist

name ➜ CD-text title (track) ➜ User title

(disc)

DXZ668RMP

CD Changer Operations

TV Operations

Note:

●Disc repeat play

• The following operations are performed the same

as for radio mode:

∗ Channel selection

∗ Storing channels in memory

∗ Calling channels from memory

∗ Auto store

After all the tracks on the current disc have been

played, disc repeat play automatically replays the

current disc over from the first track. This function

continues automatically until it is cancelled.

1. Press and hold the [RPT] button for 1 second

or longer. “D.RPT” appears in the display

and disc repeat play starts.

∗ Preset scan

See “Radio Operations” (page 16-17) for details.

●Disc random play

The disc random play selects and plays

individual tracks or discs automatically in no

particular order. This function continues

automatically until it is cancelled.

TV tuner functions

When an optional TV tuner is connected through

the CeNET cable, this unit controls all TV tuner

functions. To watch TV requires a TV tuner and

monitor.

1. Press and hold the [RDM] button for 1

second or longer. “D.RDM” appears in the

display and disc random play starts.

Watching a TV

●To cancel play

1. Press the operating button previously selected.

1. Press the [SRC] button and select the TV

mode.

2. Press the [BND] button to select the desired

TV band (TV1 or TV2). Each time the button

is pressed, the input selection toggles

between TV1 and TV2.

3. Press the [å, ∂] lever upward or

downward to tune in the desired TV station.

Watching a video

The TV tuner has a VTR input terminal to which

1 external device can be connected. Connect a

12 V video cassette player (VCP) or video

cassette recorder (VCR) to the TV tuner input

terminal.

1. Press and hold the [ADJ] button for 1 second

or longer to select VTR.

2. To return to the TV broadcast, press and

hold the [ADJ] button for 1 second or longer.

Setting the TV area

When you select the TV area (TV reception

area), the TV tuner area setting changes.

1. Press the [ADJ] button to switch to the

adjustment selection display.

2. Press the [å, ∂] lever upward or

downward to select “ TV AREA”.

3. Turn the [ROTARY] knob to select the

reception area.

4. Press the [ADJ] button to return to the

previous mode.

DXZ668RMP

TV Operations

Digital Radio / DAB Operations

DAB control function

Setting the TV diver

When a CeNET cable is used to connect a DAB

(DAH913 or DAH923) (sold separately), all

functions can be operated.

You can change the reception setting for the TV

antenna connected to the TV tuner.

1. Press the [ADJ] button to switch to the

adjustment selection display.

2. Press the [å, ∂] lever upward or

Listening to the DAB station

1. Press the [SRC] button to select the DAB

mode.

downward to select “ TV DIVER”.

3. Turn the [ROTARY] knob to set to “ON” or

“OFF”.

2. When the unit receives a DAB station, the

display changes in the following order:

● ON:

Sets reception emphasizing the visual.

● OFF:

Frequency channel ➜ service label

Sets the diver setting to OFF.

Switching displays

1. Press the [D] button to select the desired

display.

4. Press the [ADJ] button to return to the

previous mode.

2. Each time you press the [D] button, the

display switches in the following order:

Main display ➜ Spectrum analyzer display ➜

CT (clock time) display ➜ Main display

Notes:

• The number of programmes and broadcasting

times depend on the DAB stations.

• When the strength of DAB signals is weak, audio

output is muted.

Seek tuning

1. Press the [SRC] button to select the DAB

mode.

2. Press the [å, ∂] lever upward or

downward and hold in position for 1 second or

longer.

“DAB” lights up in the display when the main

unit receives a DAB station.

* The main unit stops the seek tuning when it

cannot find a DAB station. The display returns

to the previous mode.

Manual tuning

1. Press the [SRC] button to select the DAB

mode.

2. Press and hold the [BND] button for 1

second or longer. “MANU” lights up in the

display.

3. Press the [å, ∂] lever upward or

downward to select a station.

∗ If no operation is performed for more than 7

seconds, manual tuning is cancelled and the

display returns to the previous mode.

DXZ668RMP

Digital Radio / DAB Operations

2. Press the [BND] button. Each time you press

the [BND] button, the display changes in the

following order:

Switching programmes

1. Press the [SRC] button to receive a DAB

station.

[M1] ➜ [M2] ➜ [M3] ➜ [M1]...

2. Press the [å, ∂] lever upward or

downward to switch programmes in the DAB

station.

3. Press one of the [DIRECT] buttons to recall a

preset programme.

Note:

• Press and hold the [DIRECT] button for 2

seconds or longer to store the programme

currently being received. (Manual memory)

• The programme name may be the same

depending on DAB programmes.

Programme scan

This function scans through each receivable

programme in a DAB station being received for

10 seconds sequentially. This is useful when

you want to search for a desired programme.

INFO (Announcement)

In the INFO standby mode, when the selected

announcement programme starts, the main unit

switches to the selected announcement

programme automatically.

1. Press the [SRC] button to receive a DAB

station.

●Setting the INFO standby mode

2. Perform the following operation depending

on the connected model.

If you press and hold the [TA] button for 1

second or longer, “INFO” lights in the display

and the main unit is set into the INFO standby

mode until the selected announcement is

broadcast. When the selected announcement

broadcast starts, the announcement item

appears in the display. If you press and hold the

[TA] button for 1 second or longer while the

selected announcement broadcast is being

received, the selected announcement broadcast

reception is cancelled and the main unit goes

into the INFO standby mode.

Press the [

] button. “SERVICE SCAN”

lights up and the unit starts scanning each

programme for 10 seconds sequentially.

Each time the main unit scans, the

programme name is shown in the display.

3. To stop programme scan when a desired

programme is tuned in.

Press the [

] button.

Manual memory

●Cancelling INFO standby mode

The main unit has a manual memory function

for DAB programmes. Up to 18 programmes (6

programmes each) can be preset in the preset

buttons.

To cancel the INFO standby mode, press and

hold the [TA] button for 1 second or longer.

●Information select

This is a function for selecting INFORMATION

ON or OFF in the Information interrupt mode.

You can set ON up to 6 information items.

[M1], [M2] and [M3]

1. Press the [SRC] button to select the DAB

mode.

You can select any of the 6 items below:

2. Press and hold the [BND] button for 1

second or longer to select any one shown

above.

INFORMATION item

ENGLISH

Travel

Contents

3. Press the [å, ∂] lever upward or

Transport flash

Warning / Service

News flash

downward to select a desired programme.

Warning

News

4. Press and hold one of the [DIRECT] buttons

(1 to 6) for 2 seconds or longer to store the

programme.

Weather

Event

Area weather flash

Event announcement

Special event

Note:

• The interrupt programme (PTY or INFO) cannot

be written into a manual memory.

Special

1. Perform the following operation depending

on the connected model.

Recalling a preset programme

1. Press the [SRC] button to select the DAB

mode.

Press and hold the [ADJ] button for 1

second or longer to switch to the RDS

adjustment selection display.

DXZ668RMP

Digital Radio / DAB Operations

2. Press the [å, ∂] lever upward or

For the following items, see “RDS

Operations” (page 18)

downward to select “ INFO SEL

”, then press the [

enter “INFO SEL” mode.

] button to

●AF function

∗ If the reception of the current broadcast station

deteriorates, “SEARCHING” appears in the

display and the radio searches for the same

programme on another frequency.

3. Press the [å, ∂] lever upward or

downward to select an information item. You

can select any of 6 items:

●TA (Traffic Announcement)

●PTY

Travel ➜ Warning ➜News ➜ Weather ➜

Event ➜ Special ➜ Travel ➜ ...

●Emergency broadcast

4. Turn the [ROTARY] knob to set the

information item for ON or OFF.

●Switching the PTY and INFO display

language

5. Press the [

] button to store the setting.

6. Press the [ADJ] button to return to the

●Volume setting of TA, INFO emergency

broadcast (ALARM) and PTY

previous display.

8. IN CASE OF DIFFICULTY

Problem

Cause

Measure

Power does not

turn on.

Fuse is blown.

Replace with a fuse of the same amperage. If the

fuse blows again, consult your store of purchase.

(No sound is

produced.)

Incorrect wiring.

Consult your store of purchase.

No sound output Power antenna lead is

1. Turn the unit off.

when operating

the unit with

amplifiers or

power antenna

attached.

shorted to ground or

2. Remove all wires attached to the power antenna

lead. Check each wire for a possible short to

ground using an ohm meter.

excessive current is required

for remote-on the amplifiers

or power antenna.

3. Turn the unit back on.

4. Reconnect each amplifier remote wire to the

power antenna lead one by one. If the amplifiers

turn off before all wires are attached, use an

external relay to provide remote-on voltage

(excessive current required).

Turn off the power, then

Nothing happens The microprocessor has

when buttons are malfunctioned due to noise,

Reset button

press the [RELEASE]

button and remove the DCP.

Press the reset button for

about 2 seconds with a thin

rod.

pressed.

etc.

Display is not

accurate.

DCP or main unit connectors Wipe the dirt off with a soft cloth moistened with

are dirty. cleaning alcohol.

No sound heard. The speaker protection circuit 1. Turn down sound volume. Function can also be

is operating.

restored by turning the power off and on again.

(Speaker volume is reduced automatically when

the speaker protection circuit operates).

2. If the sound is muted again, consult our service

department.

DXZ668RMP

Problem

Cause

Measure

No sound heard. MP3/WMA files are absent

in a disc.

Write MP3/WMA files onto the disc properly.

Files are not recognized as

an MP3/WMA file.

Use MP3/WMA files encoded properly.

File system is not correct.

Use ISO9660 level 1, 2 or JOLIET or Romeo file system.

Clean the disc with a soft cloth.

Sound skips or is Disc is dirty.

noisy.

Disc is heavily scratched or

warped.

Replace with a disc with no scratches.

Sound is cut or

skipped.

MP3/WMA files are not

encoded properly.

Use MP3/WMA files encoded properly.

Noise is

generated or

noise is mixed

with sound.

Sound is bad

directly after

power is turned

on.

Water droplets may form on

the internal lens when the

car is parked in a humid

place.

Let dry for about 1 hour with the power on.

Wrong filename

File system is not correct.

Use ISO9660 level 1, 2 or JOLIET or Romeo file

system.

DXZ668RMP

9. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.

Take the measures described below to eliminate the problem.

Error Display

ERROR 2

Cause

Measure

A DISC is caught inside the CD deck and is

not ejected.

This is a failure of CD deck’s mechanism and

consult your store of purchase.

ERROR 3

ERROR 6

ERROR 2

ERROR 3

ERROR 6

ERROR 2

ERROR 3

ERROR 6

A DISC cannot be played due to scratches,

etc.

Replace with a non-scratched,

non-warped-disc.

A DISC is loaded upside-down inside the

CD deck and does not play.

Eject the disc then reload it properly.

A CD inside the CD changer is not loaded.

This is a failure of CD changer’s mechanism

and consult your store of purchase.

A CD inside the CD changer cannot be

played due to scratches, etc.

Replace with a non-scratched, non-warped

disc.

A CD inside the CD changer cannot be

played because it is loaded upside-down.

Eject the disc then reload it properly.

A DISC inside the DVD changer cannot be

played.

This is a failure of DVD mechanism and

consult your store of purchase.

A DISC cannot be played due to scratches,

etc.

Retry or replace with a non-scratched, non-

warped-disc.

A DISC inside the DVD changer cannot be

played because it is loaded upside-down.

Eject the disc then reload it properly

Set the correct Parental level.

ERROR P

ERROR R

Parental level error.

Region code error.

Eject the disc and replace correct region

code disc.

If an error display other than the ones described above appears, press the reset button. If the problem

persists, turn off the power and consult your store of purchase.

DXZ668RMP

10. SPECIFICATIONS

Radio section

Tuning System:

General

PLL synthesizer tuner

Output Power: 4 ✕ 25 W (DIN 45324, +B=14.4V)

Receiving Frequencies:

Power Supply Voltage:

FM : 87.5 to 108 MHz (0.05 MHz steps)

MW : 531 to 1602 kHz (9 kHz steps)

LW : 153 to 279 kHz (3 kHz steps)

14.4 V DC (10.8 to 15.6 V allowable),

negative ground

Power Consumption: Less than 15 A

Speaker Impedance: 4 Ω (4 to 8 Ω allowable)

Auto Antenna Rated Current: 500 mA or less

CD player section

System: Compact disc digital audio system

Weight:

Main unit: 1.55 kg

Remote control unit: 40 g (including battery)

Frequency Response: 5 Hz to 20 kHz ( 1 dB)

Signal to Noise Ratio: 100 dB (1 kHz)

Dynamic Range: 95 dB (1 kHz)

Distortion: 0.01%

Dimensions:

Main unit :

178 (W) ✕ 50 (H) ✕ 155 (D) mm

Remote control unit :

44 (W) ✕ 113 (H) ✕ 11 (D) mm

Note:

• Specifications and design are subject to change without notice for further improvement.

DXZ668RMP

DXZ668MP

289

Clarion Co., Ltd.

Printed in China / Imprimé en Chine / Gedruckt in China / Stampato in Cina

Gedrukt in China / Impreso en China / Tryckt i Kina / Impresso na China

PE-2789E

280-8330-00

2005/12

ATN Aries 390 User Manual
Breville BES900XL User Manual
Cannon Electric Downrigger 1979220 User Manual
Canon AF514XL S User Manual
Canon RE 450X User Manual
Canon UC 15 User Manual
Dynaudio Car Speaker BM9S User Manual
Integra E5SF1UD User Manual
iSimple DUALINK PGHTY1 User Manual
Jensen MPX6411 User Manual