Owner’s manual / Mode d’emploi
Bedienungsanleitung / Istruzioni per l’uso
Gebruiksaanwijzing / Manual de instrucciones
Bruksanvisning / Manual de instruções
DXZ558RMP
CD/MP3/WMA Receiver / CeNET Control
•
Récepteur CD/MP3/WMA: commande CeNET
•
CD/MP3/WMA Empfänger/CeNET-Steuerung
•
Lettore CD/MP3/WMA con ricevitore/Controllo CeNET
•
CD/MP3/WMA Radio/CeNET bediening
•
Receptor y reproductor de CD/MP3/WMA/Control de
CeNET
•
CD/MP3/WMA-receiver med CeNET-kontroll
•
Receptor de CD/MP3/WMA/Controlo CeNET
Thank you for purchasing this Clarion product.
∗ Please read this owner’s manual in its entirety before operating this equipment.
∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).
∗ Check the contents of the enclosed warranty card and keep it carefully with this manual.
∗ This manual includes the operating procedures of the CD changer, DVD changer, DAB and TV
tuner connected via the CeNET cable. The CD changer, DVD changer and TV tuner have their own
manuals, but no explanations for operating them are described.
CAUTIONS:
OBS!
This appliance contains a laser system and
is classified as a “CLASS 1 LASER
Apparaten innehåller laserkomponenten
som avger laserstrålning överstigande
gränsen för laserklass 1.
PRODUCT”. To use this model properly,
read this Owner’s Manual carefully and keep
this manual for your future reference. In
case of any trouble with this player, please
contact your nearest “AUTHORIZED service
station”. To prevent direct exposure to the
laser beam, do not try to open the enclosure.
VAROITUS
Suojakoteloa si saa avata. Laite sisältää
laserdiodin, joka lähettää näkymätöntä
silmille vaarallista lasersäteilyä.
!CAUTION
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED IN THE OWNER’S
MANUAL MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
ADVARSEL.
Denne mærking er anbragt udvendigt på
apparatet og indikerer, at apparatet arbejder
med laserstråler af klasse 1, hvilket betyder,
at der anvendes laserstråler af svageste
klasse, og at man ikke på apparatets
yderside kan blive udsat for utilladelig
kraftig stråling.
APPARATET BØR KUN ÅBNES AF
FAGFOLK MED SÆRLIGT KENDSKAB TIL
APPARATER MED LASERSTRÅLER!
Indvendigt i apparatet er anbragt den her
gengivne advarselsmækning, som advarer
imod at foretage sådanne indgreb i
apparatet, at man kan komme til at udsaætte
sig for laserstråling.
2
DXZ558RMP
Handling Compact Discs
Contents
1. PRECAUTIONS .............................................................................................................................. 3
Flip Down Panel .............................................................................................................................. 3
Handling Compact Discs ................................................................................................................. 4
2. CONTROLS .................................................................................................................................... 5
3. NOMENCLATURE .......................................................................................................................... 6
Names of the Buttons and Their Functions ..................................................................................... 6
Major Button Operations When External Equipment is Connected to This Unit .............................. 7
Display Items ................................................................................................................................... 8
LCD Screen ..................................................................................................................................... 8
4. DCP ................................................................................................................................................. 9
5. REMOTE CONTROL ..................................................................................................................... 10
Inserting the Battery ...................................................................................................................... 10
Functions of Remote Control Unit Buttons .....................................................................................11
6. OPERATIONS ............................................................................................................................... 12
Basic Operations ........................................................................................................................... 12
Radio Operations ........................................................................................................................... 14
RDS Operations ............................................................................................................................ 16
CD/MP3/WMA Operations ............................................................................................................. 19
Operations Common to Each Mode .............................................................................................. 23
7. OPERATIONS OF ACCESSORIES .............................................................................................. 26
CD Changer Operations ................................................................................................................ 26
TV Operations ............................................................................................................................... 27
Digital Radio/DAB Operations ....................................................................................................... 28
8. IN CASE OF DIFFICULTY ............................................................................................................ 30
9. SPECIFICATIONS ......................................................................................................................... 31
10. ERROR DISPLAYS ....................................................................................................................... 32
• Do not use commercially available CD
protection sheets or discs equipped with
stabilizers, etc. These may damage the disc
or cause breakdown of the internal
mechanism.
Use only compact discs bearing the
mark.
or
Do not play heart-shaped, octagonal, or other
specially shaped compact discs.
Some CDs recorded in CD-R/CD-RW mode
may not be usable.
Storage
• Do not expose compact discs to direct
sunlight or any heat source.
Handling
• Do not expose compact discs to excess
humidity or dust.
• Do not expose compact discs to direct heat
from heaters.
• Compared to ordinary music CDs, CD-R and
CD-RW discs are both easily affected by high
temperature and humidity and some of CD-R
and CD-RW discs may not be played.
Therefore, do not leave them for a long time in
the car.
• New discs may have some roughness around
the edges. If such discs are used, the player
may not work or the sound may skip. Use a
ball-point pen or the like to remove any
roughness from the edge of the disc.
Cleaning
• To remove fingermarks and dust, use a soft
cloth and wipe in a straight line from the
center of the compact disc to the
circumference.
• Do not use any solvents, such as
commercially available cleaners, anti-static
spray, or thinner to clean compact discs.
• After using special compact disc cleaner, let
the compact disc dry off well before playing it.
Ball-point pen
Roughness
1. PRECAUTIONS
1. This unit is applicable for on-road 4 wheel
• Never stick labels on the surface of the
compact disc or mark the surface with a pencil
or pen.
• Never play a compact disc with any
cellophane tape or other glue on it or with
peeling off marks. If you try to play such a
compact disc, you may not be able to get it
back out of the CD player or it may damage
the CD player.
• Do not use compact discs that have large
scratches, are misshapen, cracked, etc. Use
of such discs may cause misoperation or
damage.
• To remove a compact disc from its storage
case, press down on the center of the case
and lift the disc out, holding it carefully by the
edges.
Flip Down Panel
vehicle purpose only. Use for tractor, fork
truck, bulldozer, off road vehicle, 2 or 3
wheel motor bicycle, marine boat or other
special purpose vehicle is not appropriate.
This unit uses a flip-down structure that makes
possible large-size displays.
2. When the inside of the car is very cold and
CAUTION
When opening and closing the FLIP DOWN
PANEL, be careful not to catch your fingers.
They could be injured.
the player is used soon after switching on the
heater moisture may form on the disc or the
optical parts of the player and proper
playback may not be possible. If moisture
1. Always use this unit with the FLIP DOWN
forms on the disc, wipe it off with a soft cloth.
PANEL closed.
If moisture forms on the optical parts of the
2. Do not force operations or use this device
player, do not use the player for about one
abnormally when opening or closing the FLIP
hour. The condensation will disappear
DOWN PANEL.
naturally allowing normal operation.
3. Do not use the FLIP DOWN PANEL as a tray
to place objects on when it is open.
3. Driving on extremely bumpy roads which
cause severe vibration may cause the sound
to skip.
4. When closing the FLIP DOWN PANEL, do
not press the [OPEN] button.
Be sure to unfold and read the next page. / Veuillez déplier et vous référer à la page suivante.
Bitte ausbreiten und die nächste Seite lesen. / Assicurarsi di aprire e leggere la pagina successiva.
Volgende pagina uitvouwen en doorlezen a.u.b. / Cerciórese de desplegar y de leer la página siguiente.
Glöm inte att vika ut och läsa nästa sida. / Não deixe de abrir e ler a próxima página.
INFORMATION FOR USERS:.
5. Strong impacts to the operating or display
section can cause damage or deformation.
CHANGES OR MODIFICATIONS TO THIS
PRODUCT NOT APPROVED BY THE
MANUFACTURER WILL VOID THE WARRANTY.
6. If the FLIP DOWN PANEL does not open
fully, gently open it with your hand.
DXZ558RMP
3
DXZ558RMP
4
CONTROLS / LES COMMANDES / REGLER / CONTROLLI
REGELAARS / CONTROLES / KONTROLLER / CONTROLOS
3. NOMENCLATURE
2.
Note:
• Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 5 (unfold).
Main unit / Appareil principal / Hauptgerät / Apparecchio principale
Hoofdtoestel / Unidad principal / Huvudenhet / Unidade principal
Names of the Buttons and Their Functions
[OPEN] button
• Deeply push in [OPEN] button to unlock the
flip down panel.
[UP], [DN] buttons
• Select the Folder. (MP3/WMA disc only)
[
]
[
]
ROTARY
[
]
[
]
[ ]
D
SENSOR
TA
[
]
OPEN
[DIRECT] buttons
• Store a station into memory or recall it
directly while in the radio mode.
[
] button
• Perform preset scan while in the radio mode.
When the button is pressed and held, auto
store is performed.
[P.LIST] button
• Press and hold for 1 second or longer to turn
on or off the play list mode. (MP3/WMA disc
only)
• Play or pause a CD while in the CD/MP3/
WMA mode.
[a, d]
[
[
]
Z+
[ROTARY] knob
[RDM] button
• Perform random play while in the CD/MP3/
WMA mode.
• Press and hold the button for 1 second or
longer to perform folder random play while in
the MP3/WMA mode.
[
]
ADJ
]
T
• Adjust the volume by turning the knob
clockwise or counterclockwise.
• Use the knob to perform various settings.
[
]
C
[
]
A-M
[SENSOR]
• Receiver for remote control unit
• Operating range: 30˚ in all directions
[
]
DIRECT
[
]
SRC
[
]
BND
[RPT] button
[
]
SCN
• Repeat play while in the CD/MP3/WMA mode.
• Press and hold the button for 1 second or
longer to perform folder repeat play while in
the MP3/WMA mode.
[D] button
• Switch the display indication (Main display,
Title display, Clock display).
• Press and hold the button for 1 second or
longer to enter the display adjust mode.
[
]
RPT
[
]
UP
[
]
RDM
[
]
DN
[
]
P.LIST
[SCN] button
• Perform scan play for 10 seconds of each
track while in the CD/MP3/WMA mode.
• Press and hold the button for 1 second or
longer to perform folder scan play while in the
MP3/WMA mode.
With the FLIP DOWN PANEL opened / Ouvrez le PANNEAU RABATTABLE
ÖFFNUNG DER KLAPPSCHALTTAFEL / Apertura del PANNELLO APRIBILE
Met het NEERKLAPBARE PANEEL geopend / Apertura del PANEL ABATIBLE
DEN NEDFÄLLBARA PANELEN öppen / Abrindo o PAINEL RECLINÁVEL
[TA] button
• Use the button to set the TA (Traffic
Announcement) standby mode.
[Z+] button
•
Use the button to select one of the 4 types of
sound characteristics already stored in memory.
[
]
[
]
CD SLOT
[SRC] button
• Press the button to turn on the power.
Press and hold the button for 1second or
longer to turn off the power.
• Switch the operation mode among the Radio
mode, etc.
[T] button
• Use the button to input a title in the CD
mode.
• Use the button to switch the user titles or
track titles, while in the CD/MP3/WMA mode.
• Use the button to scroll the title during the
CD-text play, while in the CD/MP3/WMA
mode.
[A-M] button
• Use the button to switch to the audio mode
(bass/treble, balance/fader, Z-Enhancer Plus,
Magna Bass Extended adjustment)
• Press and hold for 1 second or longer to turn
on or off the M-B EX mode.
[C] button
• Button’s color change to multicolor.
[BND] button
[ADJ] button
• Use the button to switch to the ADJ mode or
RDS ADJ mode.
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.
Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.
Hinweis: Bitte diese Seite ausfalten und beim Lesen der einzelnen Kapitel die Frontdiagramme beachten.
Nota: Assicurarsi di aprire questa pagina e fare riferimento a questi diagrammi quando si legge ciascun capitolo.
Opmerking: Vouw deze pagina uit en zie tevens de afbeeldingen van het voorpaneel tijdens het doorlezen van de volgende hoofdstukken.
Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.
Observera: Vik ut denna sida för att kunna se figurerna över bilstereons framsida medan du läser de olika kapitlen.
Nota: Certifique-se de abrir esta página e consulte os diagramas frontais conforme realiza a leitura de cada capítulo.
• Switch the band, or seek tuning or manual
tuning while in the radio mode.
• Play a first track while in the CD/MP3/WMA
mode.
[a, d] lever
• Select a station while in the radio mode or
select a track when listening to a CD. This
lever is used to make various settings.
• Press the button to change the character.
5
DXZ558RMP
6
DXZ558RMP
Names of the Buttons and Their Functions
•
Press the lever upward or downward and hold
in position for 1 second or longer to enter the
fast-forward or fast-backward mode.
[Q] button
• Eject a CD when it is loaded into the unit.
[CD SLOT]
• CD insertion slot.
Major Button Operations When External Equipment is
Connected to This Unit
●When the CD/DVD changer is
●When the TV/DAB is connected
∗ For details, see the section “TV
Operations” or “Digital Radio/DAB
Operations”.
connected
∗ For details, see the section “CD Changer
Operations”. For the DVD changer, refer to
the Owner’s Manual provided with the DVD
changer.
[
] button
• Perform preset scan while in the TV mode.
When the button is pressed and held, auto
store is performed. (This function is only TV
tuner.)
[
] button
• Play or pause a CD or DVD.
[T] button
• Perform service scan while in the DAB mode.
• Press the button, switches the user titles or
track titles, etc. while in the CD changer
mode.
• Use the button to input a title in the CD
changer mode.
[TA] button
• Use the button to set the TA (Traffic
Announcement) standby mode in the DAB
mode. (This function is only DAB tuner.)
[BND] button
• Switch the band.
• Use the button to scroll the title during CD-text
play.
• When the button is pressed and held, switch
seek tuning or manual mode.
[BND] button
• Move the next disc in increasing order.
[DIRECT] buttons
• Store a station into memory or recall it
directly.
[UP], [DN] buttons
• Select the disc.
[RDM] button
[ADJ] buttons
• Perform random play. Also perform disc
random play when the button is pressed and
held.
• Press and hold the [ADJ] button for 1 second
or longer to switch to the TV picture mode or
VTR (external) picture mode.
[RPT] button
[a, d] lever
• Perform repeat play. When this button is
pressed and held, disc repeat play is
performed.
• Select a station.
[SCN] button
• Perform scan play for 10 seconds of each
track. Disc scan play is performed when the
button is pressed and held.
[a, d] lever
• Select a track when listening to a disc.
• Press the lever upward or downward and hold
in position for 1 second or longer to enter the
fast-forward or fast-backward mode.
DXZ558RMP
7
Display Items
Operation status indication
Titles, PS names, CT(clock),
etc. are displayed.
Mute indication
DAB indication
MP3 indication
WMA indication
: MAGNA BASS EXTEND indication
: Stereo indication for DAB
Z-Enhancer Plus indication
: Manual indication
: Disc or Folder indication
: Scan indication
: Repeat indication
: Random indication
: Preset channel indication (1to 6)
Disc number indication (1to 6)
: Alternative frequency indication
: Regional indication
: Traffic announcement indication
: Traffic programme indication
: Programme type indication
: Information indication for DAB
LCD Screen
In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.
The screen will recover when it returns to normal temperature.
8
DXZ558RMP
4. DCP
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP (DETACHABLE CONTROL PANEL)
case to prevent scratches.
CAUTION
Be sure to close the HOLD FLAP for safety
when removing the DCP.
We recommend taking the DCP with you when
leaving the car.
Attaching the DCP
1. Insert the right side of the DCP into the main
unit.
Removing the DCP
1. Press the [SRC] button for 1 second or
longer to turn off the power.
2. Insert the left side of the DCP into the main
unit.
2. Deeply push in [OPEN] button to unlock the
2.
flip down panel.
∗ If the flip down panel does not open fully,
gently open it with your hand.
[OPEN] button
DCP
1.
CAUTION
• The DCP can easily be damaged by
shocks. After removing it, be careful not to
drop it or subject it to strong shocks.
DCP
3. Pull the DCP toward you and remove it.
• If the FLIP DOWN PANEL is kept open, the
DCP may drop due to vibration of the car.
This results in damage to the DCP. So
close the FLIP DOWN PANEL or remove
the DCP to store into the case.
DCP
• The connector connecting the source unit
and the DCP is an extremely important part.
Be careful not to damage it by pressing on
it with fingernails, screwdrivers, etc.
Note:
• If the DCP is dirty, wipe off the dirt with a soft, dry
cloth only.
4. Close the HOLD FLAP.
HOLD FLAP
DXZ558RMP
9
5. REMOTE CONTROL
Signal transmitter
[
]
[
[
]
SRC
BND
]
[
[
], [
]
[
], [
]
a d
]
]
[
[
]
MUTE
DISP
[
TA
]
PTY
[
]
[
]
AF
PS/AS
Inserting the Battery
1 Turn over the remote control unit and slide the cover
in the direction indicated by the arrow in the
illustration.
2 Insert the battery (CR2025) into the insertion guides,
with the printed side (+) facing upwards.
3 Press the battery in the direction indicated by the
arrow so that it slides into the compartment.
4 Replace the cover and slide in until it clicks into
place.
Insertion guide
Notes:
Misuse may result in rupture of the battery, producing
leakage of fluid and resulting in personal injury or
damage to surrounding materials. Always follow these
safety precautions:
R
• Use only the designated battery .
• When replacing the battery, insert properly, with +/–
polarities oriented correctly.
• Do not subject battery to heat, or dispose of in fire or
water. Do not attempt to disassemble the battery.
• Dispose of used batteries properly.
10
DXZ558RMP
Functions of Remote Control Unit Buttons
Mode
CD changer
DVD changer
Radio (RDS) /DAB
CD/MP3/WMA
TV
Button
[SRC]
Switches among radio, DAB, CD/MP3/WMA, AUX, CD changer, DVD changer and TV.
Plays the first track.
Top play.
Moves the next disc
in increasing order.
[BND]
Switches reception
band.
Switches reception
band.
Increases and decreases volume (in all modes).
[
[
] , [
] , [
]
]
Moves preset
channels up and
down.
Moves tracks up and down.
Moves preset
channels up and
down.
When pressed and held for 1 second or
longer:
Fast-forward/fast-backward.
[
]
No function.
Switches between playback and pause.
No function.
Turns mute on and off.
TA on and off.
[MUTE]
[TA]
Switches among main display, title display, clock (CT) display.
[DISP]
[PS/AS]
Scan play.
Preset scan.
Scan play.
Preset scan.
When pressed and
held for 1 second or
longer: Disc scan
play.
When pressed and
Press and hold the
When pressed and
held for 2 seconds or
longer: Auto store.
held for 2 seconds or button for 1 second
longer: Auto store.
or longer to perform
folder scan play while
in the MP3/WMA
mode.
[AF]
Repeat play.
AF function on and
off.
When pressed and
held for 1 second or
Repeat play.
No function.
When pressed and
held for 1 second or
longer: Disc repeat
play.
Press and hold the
button for 1 second
or longer to perform
longer: REG function folder repeat play
on and off
while in the
MP3/WMA mode.
[PTY]
Random play.
PTY mode on and
off.
Random play.
Switches between TV
and VTR.
When pressed and
held for 1 second or
longer: Disc random
play.
Press and hold the
button for 1 second
or longer to perform
folder random play
while in the
MP3/WMA mode.
∗ Some of the corresponding buttons on the main unit and remote control unit have different functions.
DXZ558RMP
11
6. OPERATIONS
Note:Be sure to read this chapter referring to the front diagrams of
Basic Operations
chapter “2. CONTROLS” on page 5 (unfold).
Adjusting the volume
CAUTION
1. Press the front part of the [ROTARY] knob.
The knob will pop up.
Be sure to lower the volume before
switching off the unit power or the ignition
key. The unit remembers its last volume
setting. If you switch the power off with the
volume up, when you switch the power back
on, the sudden loud volume may hurt your
hearing and damage the unit.
2. Turning the [ROTARY] knob clockwise
increases the volume; turning it
counterclockwise decreases the volume.
∗ The volume level is from 0 (minimum) to 33
(maximum).
Switching the display
Turning on/off the power
Press the [D] button to select the desired display.
Note:
Each time you press the [D] button, the display
switches in the following order:
• Be careful about using this unit for a long time
without running the engine. If you drain the car’s
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
Main display ➜ Title display ➜
Clock (CT) display ➜ Main display
∗ Once selected, the preferred display becomes
the display default. When a function
adjustment such as volume is made, the
screen will momentarily switch to that
function’s display, then revert back to the
preferred display several seconds after the
adjustment.
1. Press the [SRC] button.
2. The illumination and display on the unit light
up. The unit automatically remembers its last
operation mode and will automatically switch
to display that mode.
3. Press and hold the [SRC] button for 1 second
or longer to turn off the power for the unit.
Note:
∗ For information on how to enter a title, refer to
the subsection “Entering titles” in section
“Operations Common to Each Mode”.
• The first time this unit is turned on after the wire
connections are completed, it must be checked
what equipment is connected. When the power is
turned on, “SYSTEM CHK” appears in the
display, then “TUNER” appears in the display and
change to radio mode.
∗ When CT data is not received, “CT––:––”
appears in the display.
Setting the Z-Enhancer Plus
This unit are provided with 4 types of sound
tone effects stored in memory. Select the one
you prefer.
Selecting a mode
1. Press the [SRC] button to change the
operation mode.
∗ The factory default setting is “Z+ OFF”.
Each time you press the [Z+] button, the tone
effect changes in the following order:
2. Each time you press the [SRC] button, the
operation mode changes in the following
order:
“Z+ OFF” ➜ “BASS BOOST” ➜ “IMPACT” ➜
“EXCITE” ➜ “CUSTOM” ➜ “Z+ OFF” ...
Radio mode ➜ DAB mode ➜ CD/MP3/WMA
mode ➜ CD changer mode ➜ DVD changer
mode ➜ TV mode ➜ AUX mode ➜ Radio
mode...
∗ External equipment not connected with
CeNET is not displayed.
• BASS BOOST
• IMPACT
: bass emphasized
: bass and treble
emphasized
• EXCITE
: bass and treble
emphasized mid de-
emphasized
∗ If AUX is set in AUX/TEL, AUX mode can be
selected.
• CUSTOM
• Z+ OFF
: user custom
: no sound effect
12
DXZ558RMP
Basic Operations
Adjusting the tone
Adjusting the treble (Gain,
Press the [A-M] button and select the item to
adjust. Each time you press the [A-M] button,
the item changes as following order:
Frequency)
This adjustment can be performed when the Z-
Enhancer Plus is set to “CUSTOM”.
●When “BASS BOOST” is set
1. Press the [A-M] button and select
“BASS BOOST” ➜ “BAL 0” ➜ “FAD 0” ➜
“TREB <G 0>”.
Last function mode.
2. Turning the [ROTARY] knob clockwise
emphasizes the treble; turning it
●When “IMPACT” is set
counterclockwise attenuates the treble.
“IMPACT” ➜ “BAL 0” ➜ “FAD 0” ➜ Last
∗ The factory default setting is “TREB <G 0>”.
(Adjustment range: –6 to +6)
function mode.
●When “EXCITE” is set
3. Press the [a, d] lever upward or
“EXCITE” ➜ “BAL 0” ➜ “FAD 0” ➜ Last
function mode.
downward to select “TREB <F 12K>”.
Turn the [ROTARY] knob to select the
frequency.
∗ The factory default setting is “TREB <F
12K>”. (Adjustment 8 kHz/12 kHz)
●When “CUSTOM” is set
“BASS <G 0>” ➜ “TREB <G 0>” ➜ “BAL 0”
➜ “FAD 0” ➜ Last function mode.
●When “Z+ OFF” is set
4. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
“BAL 0” ➜ “FAD 0” ➜ Last function mode.
Adjusting the bass (Gain,
Frequency, Q-curve)
Adjusting the balance
This adjustment can be performed when the Z-
Enhancer Plus is set to “CUSTOM”.
1. Press the [A-M] button and select “BAL 0”.
2. Turning the [ROTARY] knob clockwise
emphasizes the sound from the right
speaker; turning it counterclockwise
1. Press the [A-M] button and select
“BASS <G 0>”.
emphasizes the sound from the left speaker.
∗ The factory default setting is “BAL 0”.
(Adjustment range: L13 to R13)
2. Turning the [ROTARY] knob clockwise
emphasizes the bass; turning it
counterclockwise attenuates the bass.
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
∗ The factory default setting is “BASS <G 0>”.
(Adjustment range: –6 to +8)
3. Press the [a, d] lever upward or
downward to select “BASS <F 50>”.
Adjusting the fader
1. Press the [A-M] button and select “FAD 0”.
Turn the [ROTARY] knob to select the
frequency.
∗ The factory default setting is “BASS <F 50>”.
(Adjustment 50/80/120 Hz)
2. Turning the [ROTARY] knob clockwise
emphasizes the sound from the front
speakers; turning it counterclockwise
emphasizes the sound from the rear
speakers.
4. Press the [a, d] lever upward or
downward to select “BASS <Q 1>”.
Turn the [ROTARY] knob to select the Q-
∗ The factory default setting is “FAD 0”.
(Adjustment range: F12 to R12)
curve.
∗ The factory default setting is “BASS <Q 1>”.
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
(Adjustment 1/1.25/1.5/2)
5. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Note:
• During A-M adjustment mode, if no operation is
performed for more than 7 seconds, this mode
can be cancelled and return to previous mode.
DXZ558RMP
13
Basic Operations
Radio Operations
Adjusting the Z-Enhancer Plus
1. Press the [Z+] button and select the Z-
Enhancer Plus mode to adjust.
Listening to the radio
1. Press the [SRC] button and select the radio
mode. The frequency or PS appears in the
display.
2. Press the [A-M] button and turning the
[ROTARY] knob clockwise adjusts in the +
direction; tuning it counterclockwise adjusts
in the – direction.
∗ PS: Programme service name
2. Press the [BND] button and select the radio
band. Each time the button is pressed, the
radio reception band changes in the following
order:
●When “B-BOOST 0” selected, you can ad-
just the bass in the range of –3 to 3.
FM1 ➜ FM2 ➜ FM3 ➜AM (MW/LW) ➜ FM1...
●When “IMPACT 0” selected, you can ad-
just the bass and treble in the range of –3
to 3.
3. Press the [a, d] lever upward or
downward to tune in the desired station.
●When “EXCITE 0” selected, you can adjust
the bass and treble in the range of –3 to 3.
Tuning
∗ When Z-Enhancer Plus is selected, press and
hold the [Z+] button for 1 second or longer to
change to the “CUSTOM” mode.
There are 3 types of tuning mode available,
seek tuning, manual tuning and preset tuning.
Bass/treble characteristics become flat and
“Z+ FLAT” is shown in the display.
Seek tuning
There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.
Press the [Z+] button again to change to the
“Z+ OFF” mode.
DX SEEK can automatically tune in to
receivable broadcast stations; LOCAL SEEK
can tune in to only broadcast stations with a
good reception sensitivity.
Adjusting MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust
the low sound area like the normal sound
adjustment function, but emphasizes the deep
bass sound area to provide you with a dynamic
sound.
1. Press the [BND] button and select the
desired band (FM or AM (MW, LW)).
2. Tune into a station.
1. Press and hold the [A-M] button for 1 second
or longer to turn on the MAGNA BASS
EXTEND effect. “M-B EX” lights in the
display.
∗ If “MANU” is lit in the display, press and hold
the [BND] button for 1 second or longer.
“MANU” in the display goes off and seek
tuning is now available.
2. Press and hold the [A-M] button for 1 second
or longer to turn off the MAGNA BASS
EXTEND effect. “M-B EX” goes off from the
display.
∗ If “TA” is lit in the display, TP stations are
automatically sought.
●DX SEEK
Press the [a, d] lever upward or downward to
∗ The factory default setting is off.
start automatic station tuning.
When the lever is pressed upward, search will
be performing in the direction of higher
frequencies. When the lever is pressed
downward, search will be performed in the
direction of lower frequencies.
CT (Clock Time) function
The CT function receives CT data sent from an
RDS station and displays the time. Press the [D]
button to switch to the CT display.
∗ When seek tuning starts, “DX” appears in the
display.
∗ If a CT data is not being received, “CT––:––”
appears in the display.
●LOCAL SEEK
Note:
• CT data is not transmitted in some countries and
by some broadcast stations. Also, in some areas,
the CT may not display accurately.
If the lever is pressed upward or downward and
held in position for 1 second or longer, local
seek tuning will be enabled. Broadcast stations
with good reception sensitivity are selected.
∗ When local seeking starts, “LO” appears in the
display.
14
DXZ558RMP
Radio Operations
Manual tuning
Auto store
There are 2 ways available: Quick tuning and
step tuning.
Auto store is a function for storing up to 6
stations that are automatically tuned in
sequentially. If 6 receivable stations cannot be
received, a previously stored station remains
unoverwritten at the memory position.
When you are in the step tuning mode, the
frequency changes one step at a time. In the
quick tuning mode, you can quickly tune the
desired frequency.
1. Press the [BND] button and select the
desired band (FM or AM (MW/LW)).
1. Press the [BND] button and select the
desired band (FM or AM (MW/LW)).
2. Press and hold the [
] button for 2
seconds or longer. The stations with good
reception are stored automatically to the
preset channels.
∗ If auto store is performed in the FM bands, the
stations are stored in FM3 even if FM1 or FM2
was chosen for storing stations.
∗ If “MANU” is not lit in the display, press and
hold the [BND] button for 1 second or longer.
“MANU” is lit in the display and manual tuning
is now available.
2. Tune into a station.
●Quick tuning:
Press the [a, d] lever upward or
downward and hold in position for 1 second
or longer to begin station tuning.
Preset scan
Preset scan receives the stations stored in
preset memory in order. This function is useful
when searching for a desired station in memory.
●Step tuning:
Press the [a, d] lever upward or
1. Press the [
2. When a desired station is tuned in, press the
] button again to continue receiving that
station.
Note:
• Be careful not to press and hold the [
] button.
downward to perform manual tuning.
∗ If no operation is performed for more than 7
seconds, manual tuning is cancelled and the
display returns to the previous mode.
[
] button
Recalling a preset station
for 2 seconds or longer, otherwise the auto store
function is engaged and the unit starts storing
stations.
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio
stations in memory. Pressing the corresponding
[DIRECT] button recalls the stored radio
frequency automatically.
1. Press the [BND] button and select the
desired band (FM or AM (MW/LW)).
2. Press the corresponding [DIRECT] button to
recall the stored station.
∗ Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store that station
into preset memory.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
DXZ558RMP
15
RDS Operations
∗ If the reception of the current broadcast station
deteriorates, “PI SEARCH” appears in the display
and the radio searches for the same programme
on another frequency.
RDS (Radio Data System)
This unit has a built-in RDS decoder system that
supports broadcast stations transmitting RDS data.
This system can display the name of the
broadcast station being received (PS) and can
automatically switch to the broadcast station
with the best reception as you move long
distances (AF switching).
●AF function between RDS and DAB
When the same programme is broadcasted by
both RDS and DAB, and this function is ON, the
unit switches to receive the broadcast with the
better reception automatically.
Also, if a traffic announcement or programme
type is broadcast from an RDS station, no matter
what mode you are in, this broadcast is received.
∗ This function only operates when the DAH923 or
DAH913 DAB unit, sold separately, is connected.
∗ This factory default setting is “ON”.
Additionally, if EON information is received, this
information enables automatic switching of other
preset stations on the same network and
interruption of the station being received with
traffic information from other stations (TP). This
function is not available in some areas.
1. Press the [ADJ] button to switch to the
adjustment selection display.
2. Press the [a, d] lever upward or downward
to select “LINK ACT”.
3. Turn the [ROTARY] knob to select “ON” or
“OFF”.
When using the RDS function, always set the
radio to FM mode.
● ON:
AF switching between DAB and RDS enabled.
• AF
• PS
• PTY
• EON
• TP
: Alternative Frequency
: Programme Service Name
: Programme Type
: Enhanced Other Network
: Traffic Programme
● OFF:
AF switching between DAB and RDS disabled.
4. Press the [ADJ] button to return to the
previous mode.
∗ RDS interrupt does not function during AM radio
reception.
REG (Regional programme) function
When the REG function is ON, the optimum
regional station can be received. When this
function is OFF, if the regional station area
switches as you drive, a regional station for that
region is received.
∗ When set receives RDS signal, and can read PS
data, PS appears in the display.
AF function
The AF function switches to a different
frequency on the same network in order to
maintain optimum reception.
∗ The factory default setting is “OFF”.
Notes:
• This function is disabled when a national station
such as BBC R2 is being received.
• The REG function ON/OFF setting is valid when
the AF function is ON.
1. Press and hold the [ADJ] button for 1 second
or longer to switch to the RDS adjustment
selection display.
∗ The factory default setting is “ON”.
1. Press and hold the [ADJ] button for 1 second
or longer to switch to the RDS adjustment
selection display.
2. Press the [a, d] lever upward or
downward to select “AF”.
3. Turn the [ROTARY] knob to select “ON” or
2. Press the [a, d] lever upward or
“OFF”.
downward to select “REG”.
●ON:
3. Turn the [ROTARY] knob to select “ON” or
“AF” in the display lights and AF function
turns on.
“OFF”.
●ON:
●OFF:
“REG” in the display lights and REG function
“AF” in the display goes off and AF function
turns on.
turns off.
●OFF:
4. Press the [ADJ] button to return to the
“REG” in the display goes off and REG
function turns off.
previous mode.
4. Press the [ADJ] button to return to the
previous mode.
16
DXZ558RMP
RDS Operations
Manually tuning a regional station
Auto store function for TP stations
You can automatically store up to 6 TP stations into
preset memory. If the number ofTP can be received
less than 6, broadcast stations already stored in
memory and left without being overwritten.
in the same network
1. This function is valid when the AF function is
ON and the REG function is OFF.
Note:
As “TA” lit in the display, press and hold the
• This function can be used when a regional
broadcast of the same network is received.
[
] button for 2 seconds or longer. The TP
stations with the good reception sensitivity are
stored into preset memory.
2. Press any one of the [DIRECT] buttons to
call out the regional station.
∗ Even if you select FM1 or FM2, a TP station is stored
into memory for FM3.
3. If the reception condition of the called out
station is bad, press the [DIRECT] button of
the same number. The unit receives a local
station on the same network.
PTY
This function enables you to listen to a
broadcast of the selected programme type even
if the unit is on a function mode other than radio.
TA (Traffic Announcement)
In the TA standby mode, when a traffic
announcement broadcast starts, the traffic
announcement broadcast is received as top
priority regardless of the function mode so you
can listen to it. Traffic programme (TP)
automatic tuning is also possible.
∗ Some countries do not yet have PTY broadcast.
∗ In the TA standby mode, a TP station has priority
over a PTY broadcast station.
∗ The factory default setting is “OFF”.
1. Press and hold the [ADJ] button for 1 second
or longer to switch to the RDS adjustment
selection display.
∗ This function can only be used when “TP” is lit in
the display. When “TP” is lit, this means that the
RDS broadcast station being received has traffic
announcement programmes.
2. Press the [a, d] lever upward or
downward to select “PTY”.
●Setting the TA standby mode
3. Turn the [ROTARY] knob to select “ON” or
If you press the [TA] button when only “TP” is lit
in the display, “TP” and “TA” light in the display
and the unit is set into the TA standby mode
until a traffic announcement is broadcast. When
a traffic announcement broadcast starts, “TRA
INFO” appears in the display. If you press the
[TA] button while a traffic announcement
broadcast is being received, the traffic
announcement broadcast reception is cancelled
and the unit goes into the TA standby mode.
“OFF”.
●ON:
“PTY” in the display lights and PTY standby
mode is turned on. When the selected PTY
broadcast starts, the PTY item name
appears in the display.
●OFF:
“PTY” in the display goes off and PTY
standby mode is cancelled.
4. Press the [ADJ] button to return to the
●Cancelling the TA standby mode
previous mode.
As “TP” and “TA” lit in the display, press the [TA]
button. The “TA” in the display goes off and the
TA standby mode is cancelled.
∗ If “TP” is not lit, pressing the [TA] button searches
for a TP station.
●Cancelling a PTY interrupt broadcast
Press the [TA] button during the PTY interrupt
broadcast, the PTY interrupt is cancelled and
the unit returns to PTY standby mode.
●Searching for a TP station
When “TP” is not lit, if you press the [TA] button,
“TA” in the display lights and the unit
automatically receives a TP station.
Selecting PTY
1. Press and hold the [ADJ] button for 1 second
or longer to switch to the RDS adjustment
selection display.
Note:
• If a TP station is not received, the unit continues
the search operation. Pressing [TA] button again
goes off “TA” in the display and stops TP station
searching.
2. Press the [a, d] lever upward or
downward to select “PTY-SEL <E>”.
3. Press the [
] button.
DXZ558RMP
17
RDS Operations
4. Press any one of the [DIRECT] buttons.
Alternatively, turn the [ROTARY] knob to
select the desired PTY.
PTY item
Contents
ENGLISH
News
News
5. Press the [ADJ] button to return to the
Affairs
Info
Today’s events
Information
Sports
previous mode.
∗ Below are the factory default settings stored
for the [DIRECT] buttons.
Sport
Educate
Drama
Education
Drama
PTY item
Preset
number
ENGLISH
News
Contents
Culture
Science
Varied
Culture
1
2
3
4
5
6
News
Science
Info
Information
Pop Music
Variety
Pop M
Sport
Pop M
Pop music
Rock music
Easy music
Light music
Classics
Other music
Weather
Finance
Sport
Rock M
Easy M
Light M
Classics
Other M
Weather
Finance
Children
Social
Classics
Easy M
Serious Classical Music
Easy Listening Music
∗ The PTY select mode is cancelled
automatically 7 seconds after a PTY is
selected.
PTY seek
1. Press and hold the [ADJ] button for 1 second
or longer to switch to the RDS adjustment
selection display.
For children
Social
Religion
Phone In
Travel
Religion
2. Press the [a, d] lever upward or downward to
Phone in
Travel
select “PTY-SEL <E>”.
3. Press the [
] button.
Leisure
Jazz
Leisure
4. Press the [a, d] lever upward to search
for a PTY broadcast in the direction of higher
frequencies; press the lever downward to
search in the direction of lower frequencies.
Jazz
Country
Nation M
Oldies
Country
Nation music
Oldies
∗ If no station with the selected PTY broadcast
can be received, the unit returns to the PTY
select mode.
Folk M
Document
Folk music
Documentaries
PTY preset memory
1. Press and hold the [ADJ] button for 1 second
or longer to switch to the RDS adjustment
selection display.
Emergency broadcast
If an emergency broadcast is received, all the
function mode operations are stopped.
“ALARM” appears in the display and the
emergency broadcast can be heard.
2. Press the [a, d] lever upward or
downward to select “PTY-SEL <E>”.
3. Press the [
] button.
●Cancelling an emergency broadcast
4. Turning the [ROTARY] knob to select the
If you press the [TA] button, emergency
broadcast reception is cancelled.
desired PTY.
The 29 types of PTY below can be selected.
5. If you press and hold any one of the
[DIRECT] buttons for 2 seconds or longer,
the selected PTY is stored into that preset
channel memory.
18
DXZ558RMP
RDS oprations
CD/MP3/WMA Operations
Switching the PTY display language
You can select one of 4 languages (English,
German, Swedish or French) for the PTY
displayed in the display.
MP3/WMA
What is MP3?
MP3 is an audio compression method and
classified into audio layer 3 of MPEG standards.
This audio compression method has penetrated
into PC users and become a standard format.
∗ The factory default setting is “ENGLISH”.
1. Press the [ADJ] button to switch to the
adjustment selection display.
This MP3 features the original audio data
compression to about 10 percent of its initial
size with a high sound quality. This means that
about 10 music CDs can be recorded on a CD-
R disc or CD-RW disc to allow a long listening
time without having to change CDs.
2. Press the [a, d] lever upward or
downward to select “LANGUAGE”.
3. Turn the [ROTARY] knob to select the
desired language.
4. Press the [ADJ] button to return to the
previous mode.
What is WMA?
WMA is the abbreviation of Windows Media
Audio, an audio file format developed by
Microsoft Corporation.
Volume setting of TA, emergency
broadcast (ALARM) and PTY
The volume for TA, ALARM and PTY interrupts
can be set during TA, ALARM or PTY interrupt.
Notes:
• If you play a file with DRM (Digital Rights
Management) for WMA remaining ON, no audio
is output. (The WMA indicator blinks.)
• Windows Media™, and the Windows ® logo are
trademarks, or registered trademarks of Microsoft
Corporation in the United States and/or other
countries.
∗ The factory default setting is “15”.
During a TA, ALARM or PTY interrupt, turn the
[ROTARY] knob to set the volume to the desired
level (0 to 33).
∗ When the TA, ALARM or PTY interrupt ends, the
volume returns to the level it had before the
interrupt.
●To disable DRM (Digital Rights Management):
1. When using Windows Media Player 8, click
on TOOLS ➜ OPTIONS ➜ COPY MUSIC
tab, then under COPY SETTINGS, unclick
the check box for PROTECT CONTENT.
Then, reconstruct files.
2. When using Windows Media Player 9, click
on TOOL ➜ OPTIONS ➜ MUSIC RECORD
tab, then under Recording settings, unclick
the Check box for RECORD PROTECTED
MUSIC. Then, reconstruct files.
Personally constructed WMA files are used
at your own responsibility.
Precautions when creating MP3/
WMA disc
● Usable sampling rates and bit rates:
1. MP3: Sampling rate 11.025 kHz-48 kHz,
Bit rate: 8 kbps-320 kbps / VBR
2. WMA: Bit rate 48 kbps-192 kbps
● File extensions
1. Always add a file extension “.MP3” or
“.WMA” to MP3 or WMA file by using single
byte letters. If you add a file extension other
than specified or forget to add the file
extension , the file cannot be played.
DXZ558RMP
19
CD/MP3/WMA Operations
2. Files without MP3/WMA data will not play.
The indication “––:––” appears in the play
time display if you attempt to play files
without MP3/WMA data.
2. After making these settings, remove the disc
and then reinsert it.
3. When a mixed mode CD is loaded and CD is
set, the track to be played first is MP3/WMA
file data and no sound is heard.
● Logical format (File system)
1. When writing MP3/WMA file on a CD-R disc or
CD-RW disc, please select “ISO9660 level 1, 2
or JOLIET or Romeo” as the writing software
format. Normal play may not be possible if the
disc is recorded on another format.
Note:
• When playing a CCCD (Copy Control CD), set the
setting to CD type. When this is set to MP3/WMA
type, the CD cannot be played normally in some
cases.
2. The folder name and file name can be displayed
as the title during MP3/WMA play but the title
must be within 128 single byte alphabetical
letters and numerals (including an extension).
Backup Eject function
Just pressing the [Q] button ejects the disc
even if the power to the unit was not turned on.
1. Press the [OPEN] button to open the FLIP
3. Do not affix a name to a file inside a folder
having the same name.
DOWN PANEL.
Note:
● Folder structure
• If the FLIP DOWN PANEL will not open far
enough, open it gently with your hand.
1. A disc with a folder having more than 8
hierarchical levels will be impossible.
2. Press the [Q] button. Remove the disc after
● Number of files or folders
1. Up to 255 files can be recognized per folder.
Up to 500 files can be played.
it is ejected.
3. Close the FLIP DOWN PANEL.
Notes:
• Always close the FLIP DOWN PANEL once you
take out the disc.
• If you force a CD into before auto reloading, this
can damage the CD.
• If a CD (12 cm) is left in the ejected position for
15 seconds, the CD is automatically reloaded.
(Auto reload).
• 8 cm CDs are not auto reloaded. Be sure to
remove it when ejected.
2. Tracks are played in the order that they were
recorded onto a disc. (Tracks might not always
be played in the order displayed on the PC.)
3. Some noise may occur depending on the type
of encoder software used while recording.
Multisession function
When a disc contains both normal CD type tracks
and MP3/WMA type tracks mixedly, you can
select which type of the recorded tracks to play.
Listening to a disc already loaded
● Default value is “CD”.
in the unit
Press the [SRC] button to select the CD/MP3/
WMA mode.
Each time you press and hold the [BND] button for
1 second or longer, the mixed mode is switched
between CD type or MP3/WMAtype. The following
indication appears in the title display when switching
the track type to be played.
When the unit enters the CD/MP3/WMA mode,
play starts automatically.
If there is no disc loaded, the indication “NO
DISC” appears in the title display.
∗ The mode changes each time the [SRC] button is
pressed. (Modes are not displayed for equipment
that is not connected.)
● Display when CD type
M-SESS CD
track is selected:
● Display when MP3/WMA
type track is selected:
M-SESS MP3
Radio ➜ (DAB) ➜ CD/MP3/WMA ➜ (CD
changer) ➜ (DVD changer) ➜ (TV) ➜ AUX
➜ Radio...
1. Types of recording that can be played are as
follows.
Setting
Set to CD
Set to MP3/WMA
Disc
Loading a CD
Mixed with CD and
MP3/WMA type tracks
Play CD
Play MP3/WMA
1. Press the [OPEN] button to access the CD
SLOT behind the FLIP DOWN PANEL.
CD type track only Play CD
Play CD
2. Insert a CD into the center of the CD SLOT
with the labeled side facing up. The CD plays
automatically after loading.
MP3/WMA type track only Play MP3/WMA Play MP3/WMA
20
DXZ558RMP
CD/MP3/WMA Operations
Notes:
Selecting a track
• Never insert foreign objects into the CD SLOT.
●Track-up
•
If the CD is not inserted easily, there may be another
CD in the mechanism or the unit may require service.
1. Press the [a, d] lever upward to move to
the beginning of the next track.
• Discs not bearing the
or
mark and
2. Each time the [a, d] lever is pressed
upward, playback proceeds to another track
in the advancing direction.
CD-ROMs cannot be played by this unit.
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
Loading 8 cm compact discs
∗ No adapter is required to play an 8 cm CD.
●Track-down
1. Press the [a, d] lever downward to move
the beginning of the current track.
∗
Insert the 8 cm CD into the center of the insertion slot.
2. Press the [a, d] lever downward twice to
3. Close the FLIP DOWN PANEL.
move to the beginning of the previous track.
CAUTION
Be careful not to catch your hand or fingers
while closing the FLIP DOWN PANEL.
Fast-forward/fast-backward
●Fast-forward
Press the [a, d] lever upward and hold in
position for 1 second or longer.
Notes:
●Fast-backward
• If the FLIP DOWN PANEL does not open fully,
gently open with your hand.
• After loading a CD, always close the FLIP DOWN
PANEL.
Press the [a, d] lever downward and hold in
position for 1 second or longer.
∗ For MP3/WMA disc, it takes some time until the start
of searching and between tracks. In addition, the
playing time may have a margin of error.
Pausing play
1. Press the [
] button to pause play.
Folder Select
This function allows you to select a folder
containing MP3/WMA files and start playing
from the first track in the folder.
“PAUSE” appears in the display.
2. To resume CD play, press the [
again.
] button
1. Press the [DN] or [UP] button.
Displaying CD titles
Press the [DN] button to move the previous
play list.
This unit can display title data for CD-text/MP3/
WMA disc and user titles input with this unit.
Press the [UP] button to move the next play list.
1. Press the [D] button to display the title.
Root folder
1
2. Each time you press the [T] button, the title
display changes in the following order:
2
●CD-TEXT disc
User title (disc) ➜ CD-text title (disc) ➜ Artist
name ➜ CD-text title (track) ➜ User title (disc)...
●MP3/WMA disc
3
4
Folder ➜ Track ➜ Album TAG ➜ Artist TAG
➜ Title TAG ➜ Folder...
Note:
• If the CD playing is not a CD-text CD or no user
title has been input, “NO TITLE” appears in the
display.
5
• If MP3/WMA disc is not input TAG, “NO TAG”
appears in the display.
• For MP3, supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0.
• Tag displays give priority to V2.3 / 2.2
• In the case of album Tags for WMA, the
information written into the extension header is
displayed.
∗ Press the [UP] button while in the final folder
to shift to the first folder.
∗
Folder without an MP3/WMA file is not selectable.
2. To select a track, press the [a, d] lever
upward or downward .
• Only ASCII characters can be displayed in Tags.
DXZ558RMP
21
CD/MP3/WMA Operations
1. Press and hold the [RDM] button for 1
second or longer to perform folder random
play.
Top function
The top function resets the CD player to the first
track of the disc. Press the [BND] button to play
the first track (track No. 1) on the disc.
The indications “ALL···” and “RDM” light in
the display.
∗ In case of MP3/WMA, the first track of a folder being
played will be returned.
●To cancel play
1. Press the operating button previously
selected.
Other various play functions
●Scan play
This function allows you to locate and play the first
10 seconds of all the tracks recorded on a disc.
Play list mode
This function allows you to play tracks, up to
latest 5 time stamps, by reading the play list
information written on the disc.
1. Press the [SCN] button to perform scan play.
The indication “SCN” lights in the display.
∗ Scan play starts from the next track after the
track currently being played.
1. Press and hold the [P.LIST] button for 1
second or longer to turn on or off the play list
mode.
●Folder scan play
This function allows you to locate and play the
first 10 seconds of the first track of all the
folders on an MP3/WMA disc.
∗
Play list play is possible only when there is a file
whose extension is “.M3U” on the CD-R/RW.
∗ Up to 5 play lists can be recognized, and up to
255 files can be recognized per play list.
1. Press and hold the [SCN] button for 1
second or longer to perform folder scan play.
2. Press the [a, d] lever upward or
downward to change the track.
The indications “ALL···” and “SCN” light in
the display.
3. Press the [DN] button to move to the
previous play list.
∗ Folder scan play starts from the next track
after the track currently being played.
Press the [UP] button to move to the next
play list.
Notes:
●Repeat play
This function allows you to play the current track
repeatedly.
• The SCN/RPT/RDM functions cannot be used
while in the play list mode.
• The title display changes from folder name to play
list name.
1. Press the [RPT] button to perform repeat play.
The indication “RPT” lights in the display.
●Folder repeat play
This function allows you to play a track currently
being played in the MP3/WMA folder repeatedly.
Making a play list
1. Write desired tracks to a CD-R/RW, etc. Be
sure to use alphanumeric/ASCII characters
for all file names.
1. Press and hold the [RPT] button for 1 second
or longer to perform folder repeat play.
The indications “ALL···” and “RPT” light in
the display.
2. Make a play list by using a multimedia
player, etc. and save the data. The file format
must be M3U.
●Random play
This function allows you to play all tracks
recorded on a disc in a random order.
3. Again, write this play list to the CD-R/RW, etc.
Notes:
• When writing to a CD-R/RW, etc., be sure to use
alphanumeric/ASCII characters.
1. Press the [RDM] button to perform random
play.
• Up to 5 layers can be recognized as a list. For
written play lists, latest 5 lists are recognized in
the order in which they are written.
• When writing to a CD-R/RW, etc., turn off the Disc
At Once function.
The indication “RDM” lights in the display.
●Folder random play
This function allows you to play all the tracks of
all the folders recorded on an MP3/WMA disc in
a random order.
• When adding a play list, it is recommended to
write it in the Root folder.
22
DXZ558RMP
Operations Common to Each Mode
3-4. Turn the [ROTARY] knob to select the
To change display setting
desired character.
1. Press and hold the [D] button for 1 second or
longer to switch to the adjustment selection
display.
3-5. Repeat step 3-2 to 3-4 to enter up to 30
characters for message.
3-6. Press and hold the [
] button for 2
2. Press the [a, d] lever upward or
seconds or longer to store the message in
memory and cancel input message mode.
∗ Press and hold the [BND] button for 1second
downward to select the “item name”.
“SCREEN SVR” ↔ “MSG INP <E>” ↔
“AUTO SCROL” ↔ “DIMMER” ↔
“CONTRAST”
or longer to cancel the input message. Then
press and hold the [
] button for 2 seconds
3. Turn the [ROTARY] knob to select the
or longer to store the message and the
message return to default setting.
“desired setting value”.
∗ In the case of item names appearing with the
●Setting the method for title scroll
Set how to scroll in CD-TEXT, MP3/WMA TITLE.
∗ The factory default setting is “ON”.
“E” suffix, after the item name, the [
]
button must be pressed to display the setting
value.
2-1. Select “AUTO SCROL”.
∗ After completing settings, press the [D] button
to return to the previous mode.
3-1. Turn the [ROTARY] knob to select “ON” or
“OFF”.
●Turning the screen saver function on
or off
This unit is provided with the screen saver
function which allows you to show various kinds
of patterns and characters in the operation
status indication area of the display in a random
order. You can turn on or off this function.
• ON:
To scroll automatically.
• OFF:
To scroll just 1 time when the title was
changed or the [T] button was pressed for
1 second or longer.
If the button operation is performed with the
screen saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
●Dimmer control
You can setting the dimmer control “ON” or
“OFF”.
∗ The factory default setting is “ON”.
2-1. Select “DIMMER”.
∗ The factory default setting is “ON”.
3-1. Turn the [ROTARY] knob to select “ON” or
2-1. Select “SCREEN SVR”.
“OFF”.
3-1. Turn the [ROTARY] knob to select the
setting. Each time you turn the [ROTARY]
knob, the setting changes in the following
order:
●Selecting the CONTRAST mode
∗ The factory default setting is “5”.
2-1. Select “CONTRAST”.
SS OFF ➜ SS ON ➜ SS MESSAGE.
3-1. Turn the [ROTARY] knob to select from 1-8.
●Entering MESSAGE INFORMATION
Message up to 30 characters long can be stored
in memory and displayed as a type of screen
saver setting.
To change other settings
1. Press the [ADJ] button to switch to the
∗
The factory default setting is “Welcome to Clarion”.
2-1. Select “MSG INP <E>”.
3-1. Press the [ ] button.
adjustment selection display.
2. Press the [a, d] lever upward or
downward to select the “item name”.
3-2. Press the [a, d] lever upward or
Each time the [a, d] lever is pressed up/
down, the item display changes in the
following order:
downward to move the cursor.
3-3. Press the [BND] button to select a
character. Each time you press the [BND]
button, the character changes in the
following orders:
“BLINK LED” ↔ “AMP CANCEL” ↔ “LINK
ACT” ↔ “LANGUAGE” ↔ “TV DIVER” ↔
“AUX/TEL” ↔ “AUX SENSE” ↔ “TEL-SP”
↔ “TEL-SWITCH” ↔ “SYS CHK <E>”
Capital letters ➜ Numbers ➜ Symbols ➜
Umlaut ➜ Capital letters…
DXZ558RMP
23
Operations Common to Each Mode
3. Turn the [ROTARY] knob to select the
●Setting the car speaker output for the
cellular phone (Optional TEL-002)
∗ The factory default setting is “RIGHT”.
“desired setting item”.
∗ After completing settings, press the [ADJ]
button to return to the previous mode.
∗ To output the telephone calls, set the cellular phone
interrupt to ON.
●Anti-theft indicator
2-1. Select “TEL-SP”.
The red Anti-theft indicator is a function for
preventing theft. When the DCP is removed
from the unit, this indicator blinks.
3-1. Turn the [ROTARY] knob to select “RIGHT”
or “LEFT”.
∗ The factory default setting is “OFF”.
• RIGHT:
2-1. Select “BLINK LED”.
Telephone calls can be heard on the front
right speaker connected to this unit.
3-1. Turn the [ROTARY] knob to select “ON” or
“OFF”.
• LEFT:
●Setting the external amplifier
∗ The factory default setting is “OFF”.
Telephone calls can be heard on the front
left speaker connected to this unit.
2-1. Select “AMP CANCEL”.
●Cellular phone interrupt setting
If you connect this unit and your cellular phone with
a separately sold unit (TEL-002), you can listen to
your telephone calls on your car speakers.
3-1. Turn the [ROTARY] knob to select “ON” or
“OFF”.
• ON:
∗ The factory default setting is “OFF”.
Use with connected AMP.
• OFF:
2-1. Select “TEL-SWITCH”.
3-1. Turn the [ROTARY] knob to select the
setting. Each time you turn the [ROTARY]
knob, the setting changes in the following
order:
Use with inside AMP.
●Selecting AUX/TEL
You can listen to sounds and music from
external devices or your telephone calls from
the speakers when connected to this unit.
OFF ➜ ON ➜ MUTE ➜ OFF...
• OFF:
When TEL INT or External device is connected to
this unit, you can select TEL mode or AUX mode.
∗ The factory default setting is “AUX”.
This unit continues normal operation even
when the cellular phone is used.
Note:
• If connecting a hands-free kit, please ensure the
setting is ON to receive the telephone audio
through the system.
2-1. Select “AUX/TEL”.
3-1. Turn the [ROTARY] knob to select “AUX” or
“TEL”.
• ON:
• AUX :
You can listen to your telephone calls from
the speakers connected to this unit.
AUX/TEL input cable is for external Audio
input.
∗ When listening to your calls on your car
speakers, you can adjust the volume by
turning the [ROTARY] knob.
• TEL :
AUX/TEL input cable is for cellular phone
audio input.
• MUTE:
●Selecting AUX IN sensitivity
Make the following settings to select the
sensitivity when sounds from external devices
connected to this unit are difficult to hear even
after adjusting the volume.
The sound from this unit is muted during
telephone calls.
●Performing a system check
2-1. Select “SYS CHK<E>”.
∗ The factory default setting is “AUX MID”.
3-1. Press and hold the [
second or longer.
] button for 1
2-1. Select “AUX SENSE”.
“SYSTEM CHK” appears in the display,
then the unit returns to the previous
operation mode.
3-1. Turn the [ROTARY] knob to select “AUX
LOW”, “AUX MID” or “AUX HIGH”.
24
DXZ558RMP
Operations Common to Each Mode
1. Press the [SRC] button to select the mode
you want to enter a title (CD, CD changer or
TV).
Setting the button illumination
Press the [C] button to select a color type. Each
time you press the [C] button, the type changes
in the following orders:
2. Select and play a CD in the CD changer or
tune in to a TV station for which you want to
enter the title.
COLOR SCAN ➜ RED ➜ MANDARIN ➜
ORANGE ➜ AMBER ➜ YELLOW ➜
G-YELLOW ➜ LIME ➜ GREEN ➜ D-GREEN
➜ USER ➜ COLOR SCAN…
3. Press the [D] button and display the title
display.
4. Press and hold the [T] button for 1 second or
●Setting COLOR SCAN mode
longer.
As selecting “COLOR SCAN”, the color
5. Press the [a, d] lever upward or
automatically changes.
downward to move the cursor.
∗ The factory default setting is “COLOR SCAN”.
∗ After 3 seconds the color changes to the other.
●Setting USER mode
6. Press the [BND] button to select a character.
Each time you press the [BND] button, the
character changes in the following order:
The factory default setting is “R>8 G>8” (R:red,
G:green).
Capital letters ➜ Numbers ➜ Symbols ➜
Umlaut ➜ Capital letters...
As selecting “USER”, press and hold the [C]
button for 1 second or longer “R>8 G>8”
appears in the display.
7. Turning the [ROTARY] knob to select the
desired character.
8. Repeat steps 5 to 7 to enter up to 10
characters for the title.
1. Press the [a, d] lever upward or
downward to move the cursor.
9. Press and hold the [
] button for 2
2. Turn the [ROTARY] knob to select from 0 to 8.
seconds or longer to store the title into
memory and cancel title input mode.
3. Press and hold the [
] button for 2
seconds or longer to store the color in
memory and cancel setting mode.
Clearing titles
1. Select and play a CD in the CD changer or
tune in to a TV station for which you want to
clear the title.
COLOR
RED
R
8
8
8
8
8
6
4
2
0
G
0
1
2
5
8
8
8
8
8
MANDARIN
ORANGE
AMBER
YELLOW
G-YELLOW
LIME
2. Press the [D] button and display the title
display.
3. Press and hold the [T] button for 1 second or
longer to switch to the title input display.
4. Press and hold the [BND] button for 1
second or longer.
GREEN
D-GREEN
5. Press and hold the [
] button for 2
seconds or longer to clear the title and
cancel title input mode.
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for CD, CD changer and
TV stations. The number of titles that can be
entered for each mode are as follows.
Mode
CD mode
TV mode
Number of titles
50 titles
20 titles
CD changer mode
DCZ628 connected
CDC655Tz connected
Number of titles
100 titles
100 titles
DXZ558RMP
25
7. OPERATIONS OF ACCESSORIES
CD Changer Operations
Note:
Notes:
• The following operations are the same as for CD
mode:
∗ Pause
• If the CD playing is not a CD-text CD or no user
title has been input, “NO TITLE” appears in the
display.
• If a CD-text CD is not input its disc title or a track
title, “NO TITLE” appears in the display.
∗ Track selection
∗ Fast-forward/fast-backward
∗ Scan play
Procedure to scroll a title
Set “SCROLL” to “ON” or “OFF”.
∗ Repeat play
∗ Random play
See “CD/MP3/WMA Operations” (page 21-22) for
details.
(The factory default setting is “ON”. Refer to the
subsection “Turning the screen saver function
on or off” in section “Operation common to
each mode”.)
CD changer functions
●When set to “ON”
When an optional CD changer is connected
through the CeNET cable, this unit controls all
CD changer functions. This unit can control a
total of 2 changers.
The title is automatically kept scrolling.
●When set to “OFF”
To scroll just 1 time when the title was changed
or the [T] button was pressed for 1 second or
longer.
Press the [SRC] button and select the CD
changer mode to start play. If 2 CD changers
are connected, press the [SRC] button to select
the CD changer for play.
∗ If “NO MAG” appears in the display, insert the
magazine into the CD changer. “DISC CHECK”
appears in the display while the player loads
(checks) the magazine.
Selecting a CD
Press the [DN] or the [UP] button to select the
desired disc.
∗ If a CD is not loaded in a slot of magazine, pressing
∗ If “NO DISC” appears in the display, eject the
magazine and insert discs into each slot. Then,
reinsert the magazine back into the CD changer.
the [UP] or the [DN] button cannot work.
Other various play functions
●Disc scan play
Disc scan play locates and plays the first 10
seconds of the first track on each disc in the
currently selected CD changer. This function
continues automatically until it is cancelled.
Note:
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
CAUTION
∗ Disc scan play is useful when you want to select a
desired CD.
CD-ROM discs cannot be played from every
CD changer, it’s depended on the model.
1. Press and hold the [SCN] button for 1
second or longer. “ALL···” and “SCN” light in
the display and disc scan play starts.
Displaying CD titles
This unit can display title data for CD-text CDs
and user titles input with this unit.
●Disc repeat play
After all the tracks on the current disc have
been played, disc repeat play automatically
replays the current disc over from the first track.
This function continues automatically until it is
cancelled.
1. Press the [D] button to display the title.
2. Each time you press the [T] button, the title
display changes in the following order:
User title (disc) ➜ CD-text title (disc) ➜ Artist
name ➜ CD-text title (track) ➜ User title
(disc)…
1. Press and hold the [RPT] button for 1 second
or longer. “ALL···” and “RPT” light in the
display and disc repeat play starts.
26
DXZ558RMP
CD Changer Operations
TV Operations
Note:
●Disc random play
• The following operations are performed the same
as for radio mode:
∗ Channel selection
∗ Storing channels in memory
∗ Calling channels from memory
∗ Auto store
The disc random play selects and plays
individual tracks or discs automatically in no
particular order. This function continues
automatically until it is cancelled.
1. Press and hold the [RDM] button for 1
second or longer. “ALL···” and “RDM” light in
the display and disc random play starts.
∗ Preset scan
See “Radio Operations” (page 14-15) for details.
●To cancel play
1. Press the operating button previously
selected.
TV tuner functions
When an optional TV tuner is connected through
the CeNET cable, this unit controls all TV tuner
functions. To watch TV requires a TV tuner and
monitor.
Watching a TV
1. Press the [SRC] button and select the TV
mode.
2. Press the [BND] button to select the desired
TV band (TV1 or TV2). Each time the button
is pressed, the input selection toggles
between TV1 and TV2.
3. Press the [a, d] lever upward or
downward to tune in the desired TV station.
Watching a video
The TV tuner has a VTR input terminal to which
1 external device can be connected. Connect a
12 V video cassette player (VCP) or video
cassette recorder (VCR) to the TV tuner input
terminal.
1. Press and hold the [ADJ] button for 1 second
or longer.
2. To return to the TV broadcast, press and
hold the [ADJ] button for 1 second or longer.
Setting the TV area
When you select the TV area (TV reception
area), the TV tuner area setting changes.
1. Press the [ADJ] button to switch to the
adjustment selection display.
2. Press the [a, d] lever upward or
downward to select “TV AREA <E>”.
3. Press the [
] button.
4. Turn the [ROTARY] knob to select the
reception area.
5. Press the [
] button.
6. Press the [ADJ] button to return to the
previous mode.
DXZ558RMP
27
TV Operations
Digital Radio / DAB Operations
DAB control function
Setting the TV diver
When a CeNET cable is used to connect a DAB
(DAH913 or DAH923) (sold separately), all
functions can be operated.
You can change the reception setting for the TV
antenna connected to the TV tuner.
1. Press the [ADJ] button to switch to the
adjustment selection display.
2. Press the [a, d] lever upward or
Listening to the DAB station
1. Press the [SRC] button to select the DAB
mode.
downward to select “TV DIVER”.
3. Turn the [ROTARY] knob to set to “ON” or
“OFF”.
2. When the unit receives a DAB station, the
display changes in the following order:
● ON:
Sets reception emphasizing the visual.
● OFF:
Frequency channel ➜ service label
Sets the diver setting to OFF.
Switching displays
1. Press the [D] button to select the desired
display.
4. Press the [ADJ] button to return to the
previous mode.
2. Each time you press the [D] button, the
display switches in the following order:
S-LABL ➜ PTY ➜ CLOCK ➜ S-LABL ...
Notes:
• The display shown in the normal reception mode
and the preset reception mode is the same when
a DAB station is received.
• The number of programmes and broadcasting
times depend on the DAB stations.
• When the strength of DAB signals is weak, audio
output is muted.
Seek tuning
1. Press the [SRC] button to select the DAB
mode.
2. Press the [a, d] lever upward or downward
and hold in position for 1 second or longer.
“DAB” lights up in the display when the main
unit receives a DAB station.
* The main unit stops the seek tuning when it
cannot find a DAB station. The display returns
to the previous mode.
Manual tuning
1. Press the [SRC] button to select the DAB
mode.
2. Press and hold the [BND] button for 1
second or longer. “MANU” lights up in the
display.
3. Press the [a, d] lever upward or
downward to select a station.
∗ If no operation is performed for more than 7
seconds, manual tuning is cancelled and the
display returns to the previous mode.
28
DXZ558RMP
Digital Radio / DAB Operations
2. Press the [BND] button. Each time you press
the [BND] button, the display changes in the
following order:
Switching programmes
1. Press the [SRC] button to receive a DAB
station.
[M1] ➜ [M2] ➜ [M3] ➜ [M1]...
2. Press the [a, d] lever upward or
downward to switch programmes in the DAB
station.
3. Press one of the [DIRECT] buttons to recall a
preset programme.
Note:
Note:
• Press and hold the [DIRECT] button for 2
seconds or longer to store the programme
currently being received. (Manual memory)
• The programme name may be the same
depending on DAB programmes.
Programme scan
This function scans through each receivable
programme in a DAB station being received for
10 seconds sequentially. This is useful when
you want to search for a desired programme.
INFO (Announcement)
In the INFO standby mode, when the selected
announcement programme starts, the main unit
switches to the selected announcement
programme automatically.
1. Press the [SRC] button to receive a DAB
station.
●Setting the INFO standby mode
2. Perform the following operation depending
on the connected model.
If you press and hold the [TA] button for 1
second or longer, “INFO” lights in the display
and the main unit is set into the INFO standby
mode until the selected announcement is
broadcast. When the selected announcement
broadcast starts, the announcement item
appears in the display. If you press and hold the
[TA] button for 1 second or longer while the
selected announcement broadcast is being
received, the selected announcement broadcast
reception is cancelled and the main unit goes
into the INFO standby mode.
Press the [
] button. “SERVICE SC” lights
up and the unit starts scanning each
programme for 10 seconds sequentially.
Each time the main unit scans, the
programme name is shown in the display.
3. To stop programme scan when a desired
programme is tuned in.
Press the [
] button.
Manual memory
●Cancelling INFO standby mode
The main unit has a manual memory function
for DAB programmes. Up to 18 programmes (6
programmes each) can be preset in the preset
buttons.
To cancel the INFO standby mode, press and
hold the [TA] button for 1 second or longer.
●Information select
This is a function for selecting INFORMATION
ON or OFF in the Information interrupt mode.
You can set ON up to 6 information items.
[M1], [M2] and [M3]
1. Press the [SRC] button to select the DAB
mode.
You can select any of the 6 items below:
2. Press and hold the [BND] button for 1
second or longer to select any one shown
above.
INFORMATION item
ENGLISH
Travel
Contents
3. Press the [a, d] lever upward or
Transport flash
Warning / Service
News flash
downward to select a desired programme.
Warning
News
4. Press and hold one of the [DIRECT] buttons
(1 to 6) for 2 seconds or longer to store the
programme.
Weather
Event
Area weather flash
Event announcement
Special event
Note:
• The interrupt programme (PTY or INFO) cannot
be written into a manual memory.
Special
1. Perform the following operation depending
on the connected model.
Recalling a preset programme
1. Press the [SRC] button to select the DAB
mode.
Press and hold the [ADJ] button for 1
second or longer to switch to the RDS
adjustment selection display.
DXZ558RMP
29
Digital Radio / DAB Operations
2. Press the [a, d] lever upward or
For the following items, see “RDS
Operations” (page 16)
downward to select “INFO-S <E>”, then
press the [
mode.
] button to enter “INFO-S <E>”
●AF function
∗ If the reception of the current broadcast station
deteriorates, “SEARCHING” appears in the
display and the radio searches for the same
programme on another frequency.
3. Press the [a, d] lever upward or
downward to select an information item. You
can select any of 6 items:
●TA (Traffic Announcement)
●PTY
Travel ➜ Warning ➜News ➜ Weather ➜
Event ➜ Special ➜ Travel ➜ ...
●Emergency broadcast
4. Turn the [ROTARY] knob to set the
information item for ON or OFF.
●Switching the PTY and INFO display
language
5. Press the [
] button to store the setting.
6. Press the [ADJ] button to return to the
●Volume setting of TA, INFO emergency
broadcast (ALARM) and PTY
previous display.
8. IN CASE OF DIFFICULTY
Problem
Cause
Measure
Power does not
turn on.
Fuse is blown.
Replace with a fuse of the same amperage. If the
fuse blows again, consult your store of purchase.
(No sound is
produced.)
Incorrect wiring.
Consult your store of purchase.
No sound output Power antenna lead is
1. Turn the unit off.
when operating
the unit with
amplifiers or
power antenna
attached.
shorted to ground or
2. Remove all wires attached to the power antenna
lead. Check each wire for a possible short to
ground using an ohm meter.
excessive current is required
for remote-on the amplifiers
or power antenna.
3. Turn the unit back on.
4. Reconnect each amplifier remote wire to the
power antenna lead one by one. If the amplifiers
turn off before all wires are attached, use an
external relay to provide remote-on voltage
(excessive current required).
Turn off the power, then
Nothing happens The microprocessor has
when buttons are malfunctioned due to noise,
Reset button
press the [OPEN] button
and remove the DCP.
Press the reset button for
about 2 seconds with a thin
rod.
pressed.
etc.
Display is not
accurate.
DCP or main unit connectors Wipe the dirt off with a soft cloth moistened with
are dirty. cleaning alcohol.
No sound heard. The speaker protection circuit 1. Turn down sound volume. Function can also be
is operating.
restored by turning the power off and on again.
(Speaker volume is reduced automatically when
the speaker protection circuit operates).
2. If the sound is muted again, consult our service
department.
30
DXZ558RMP
Problem
Cause
Measure
No sound heard. MP3/WMA files are absent
in a disc.
Write MP3/WMA files onto the disc properly.
Files are not recognized as
an MP3/WMA file.
Use MP3/WMA files encoded properly.
File system is not correct.
Use ISO9660 level 1, 2 or JOLIET or Romeo file system.
Clean the disc with a soft cloth.
Sound skips or is Disc is dirty.
noisy.
Disc is heavily scratched or
warped.
Replace with a disc with no scratches.
Sound is cut or
skipped.
Noise is
generated or
noise is mixed
with sound.
MP3/WMA files are not
encoded properly.
Use MP3/WMA files encoded properly.
Let dry for about 1 hour with the power on.
Sound is bad
directly after
power is turned
on.
Water droplets may form on
the internal lens when the
car is parked in a humid
place.
Wrong filename
File system is not correct.
Use ISO9660 level 1, 2 or JOLIET or Romeo file
system.
Play list play is
not performed.
File name or extension is not Use alphanumeric/ASCII characters for MP3/WMA
correct.
file name.
Use “.M3U” for the file extension of a play list.
9. SPECIFICATIONS
Radio section
Tuning System:
General
PLL synthesizer tuner
Output Power: 4 ✕ 25 W (DIN 45324, +B=14.4V)
Receiving Frequencies:
Power Supply Voltage:
FM : 87.5 to 108 MHz (0.05 MHz steps)
MW : 531 to 1602 kHz (9 kHz steps)
LW : 153 to 279 kHz (3 kHz steps)
14.4 V DC (10.8 to 15.6 V allowable),
negative ground
Power Consumption: Less than 15 A
Speaker Impedance: 4 Ω (4 to 8 Ω allowable)
Auto Antenna Rated Current: 500 mA or less
CD player section
System: Compact disc digital audio system
Weight:
Main unit: 1.3 kg
Remote control unit: 40 g (including battery)
Frequency Response: 5 Hz to 20 kHz ( 1 dB)
Signal to Noise Ratio: 100 dB (1 kHz)
Dynamic Range: 95 dB (1 kHz)
Distortion: 0.01%
Dimensions:
Main unit :
178 (W) ✕ 50 (H) ✕ 157 (D) mm
Remote control unit :
44 (W) ✕ 110 (H) ✕ 11 (D) mm
Note:
• Specifications and design are subject to change without notice for further improvement.
DXZ558RMP
31
10. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
Error Display
ERROR 2
Cause
Measure
A DISC is caught inside the CD deck and is
not ejected.
This is a failure of CD deck’s mechanism and
consult your store of purchase.
ERROR 3
ERROR 6
ERROR 2
ERROR 3
ERROR 6
ERROR 2
ERROR 3
ERROR 6
A DISC cannot be played due to scratches,
etc.
Replace with a non-scratched,
non-warped-disc.
A DISC is loaded upside-down inside the
CD deck and does not play.
Eject the disc then reload it properly.
A CD inside the CD changer is not loaded.
This is a failure of CD changer’s mechanism
and consult your store of purchase.
A CD inside the CD changer cannot be
played due to scratches, etc.
Replace with a non-scratched, non-warped
disc.
A CD inside the CD changer cannot be
played because it is loaded upside-down.
Eject the disc then reload it properly.
A DISC inside the DVD changer cannot be
played.
This is a failure of DVD mechanism and
consult your store of purchase.
A DISC cannot be played due to scratches,
etc.
Retry or replace with a non-scratched, non-
warped-disc.
A DISC inside the DVD changer cannot be
played because it is loaded upside-down.
Eject the disc then reload it properly
Set the correct Parental level.
ERROR P
ERROR R
Parental level error.
Region code error.
Eject the disc and replace correct region
code disc.
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your store of purchase.
32
DXZ558RMP
|