Clarion DXZ379RMP User Manual

CAUTIONS:

OBS!

This appliance contains a laser system

and is classified as a “CLASS 1 LASER

PRODUCT”. To use this model properly,

read this Owner’s Manual carefully and

keep this manual for your future

Apparaten innehåller laserkomponenten

som avger laserstrålning överstigande

gränsen för laserklass 1.

reference. In case of any trouble with

this player, please contact your nearest

“AUTHORIZED service station”. To

prevent direct exposure to the laser

beam, do not try to open the enclosure.

VAROITUS

Suojakoteloa si saa avata. Laite sisältää

laserdiodin, joka lähettää näkymätöntä

silmille vaarallista lasersäteilyä.

Owner’s manual

Mode d’emploi

Bedienungsanleitung

Istruzioni per l’uso

Gebruiksaanwijzing

Manual de instrucciones

Bruksanvisning

!CAUTION

USE OF CONTROLS OR

ADJUSTMENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE

SPECIFIED IN THE OWNER’S MANUAL

MAY RESULT IN HAZARDOUS

RADIATION EXPOSURE.

Manual de instruções

DXZ378RMP

DXZ379RMP

ADVARSEL.

Denne mærking er anbragt udvendigt

på apparatet og indikerer, at apparatet

arbejder med laserstråler af klasse 1,

hvilket betyder, at der anvendes

laserstråler af svageste klasse, og at

man ikke på apparatets yderside kan

blive udsat for utilladelig kraftig

stråling.

APPARATET BØR KUN ÅBNES AF

FAGFOLK MED SÆRLIGT KENDSKAB

TIL APPARATER MED

LASERSTRÅLER!

Indvendigt i apparatet er anbragt den

her gengivne advarselsmækning, som

advarer imod at foretage sådanne

indgreb i apparatet, at man kan komme

til at udsaætte sig for laserstråling.

CD/MP3/WMA RECEIVER WITH CeNET CONTROL

AUTORADIO CD/MP3/WMA / AVEC COMMANDE CeNET

CD/MP3/WMA-RECEIVER MIT CeNET-STEUERUNG

SINTOLETTORE CD/MP3/WMA CON CONTROLLO CeNET

CD/MP3/WMA-RADIO-COMBINATIE MET CeNET-BEDIENING

RECEPTOR CD/MP3/WMA CON CONTROL CeNET

CD/MP3/WMA-RADIO MED CeNET-KONTROLL

RECEPTOR CD/MP3/WMA COM CONTROLO CeNET

Be sure to unfold and read the next page. / Veuillez déplier et vous référer à la page suivante.

Bitte ausbreiten und die nächste Seite lesen. / Assicurarsi di aprire e leggere la pagina successiva.

Volgende pagina uitvouwen en doorlezen a.u.b. / Cerciórese de desplegar y de leer la página siguiente.

Glöm inte att vika ut och läsa nästa sida. / Não deixe de abrir e ler a próxima página.

DXZ378RMP/DXZ379RMP

Thank you for purchasing this Clarion product.

CONTROLS/LES COMMANDES/BEDIENELEMENTE/CONTROLLI

BEDIENINGSORGANEN/CONTROLES/KONTROLLER/CONTROLOS

∗ Please read this owner’s manual in its entirety before operating this equipment.

∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).

∗ Check the contents of the enclosed warranty card and keep it carefully with this manual.

∗ This manual includes the operating procedures of the iPod interface, CD/DVD changer, DAB

and TV tuner connected via the CeNET cable. The iPod interface, CD/DVD changer and TV

tuner have their own manuals, but no explanations for operating them are described.

“iPod” is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.

Main unit / Appareil principal / Hauptgerät / Apparecchio principale

Hoofdapparaat / Unidad principal / Huvudenhet / Unidade principal

[

] ( )

DIRECT 1-3

SCN RPT RDM

[

]

SRC

[

], [ ], [

]

Contents

[

]

[

]

IR RECEIVER

CONTROLS..................................................................................................................................ii

[AUX]

1. PRECAUTIONS......................................................................................................................3

Flip Down Panel..................................................................................................................... 3

Handling Compact Discs........................................................................................................ 4

[

]

OPEN

2. NOMENCLATURE .................................................................................................................5

Names of the Buttons and Their Functions............................................................................ 5

Display Items ......................................................................................................................... 6

LCD Screen ........................................................................................................................... 6

3. DCP ........................................................................................................................................7

[

]

ROTARY

4. REMOTE CONTROL..............................................................................................................8

Functions of Remote Control Unit Buttons............................................................................. 8

Inserting the Battery............................................................................................................. 10

[

]

[

]

BND

[

] ( )

DIRECT 4-6

[

] (SOUND)

5. OPERATIONS......................................................................................................................11

Basic Operations.................................................................................................................. 11

Radio Operations................................................................................................................. 14

RDS Operations................................................................................................................... 16

CD/MP3/WMA Operations................................................................................................... 20

Operations Common to Each Mode..................................................................................... 24

[

]

DISP

With the FLIP DOWN PANEL opened / Ouvrez le PANNEAU INCLINABLE

Bei geöffnetem KLAPPBILDSCHIRM / A CONSOLE APRIBILE aperta

Met het KANTELEND BEDIENINGSPANEEL geopend / Apertura del PANEL ABATIBLE

Med den NEDFÄLLBARA KONSOLEN öppen / Com a CONSOLA RECLINÁVEL aberta

6. OPERATIONS OF ACCESSORIES.....................................................................................27

iPod BB Operations ............................................................................................................. 27

CD Changer Operations ...................................................................................................... 29

DVD Changer Operations.................................................................................................... 30

TV Operations...................................................................................................................... 31

Digital Radio / DAB Operations............................................................................................ 32

[

]

CD SLOT

[

] (EJECT)

7. IN CASE OF DIFFICULTY ...................................................................................................35

8. ERROR DISPLAYS..............................................................................................................36

9. SPECIFICATIONS................................................................................................................37

Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.

Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.

Hinweis: Bitte diese Seite ausfalten und beim Lesen der einzelnen Kapitel die Frontdiagramme beachten.

Nota: Assicurarsi di aprire questa pagina e fare riferimento a questi diagrammi quando si legge ciascun capitolo.

Opmerking: Vouw deze pagina uit en zie tevens de afbeeldingen van het voorpaneel tijdens het doorlezen van de volgende hoofdstukken.

Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.

Observera: Vik ut denna sida för att kunna se bilderna över bilstereons framsida, medan du läser de olika kapitlen.

Nota: Certifique-se de abrir esta página e consulte os diagramas frontais conforme realiza a leitura de cada capítulo.

DXZ378RMP/DXZ379RMP

1. PRECAUTIONS

1. This unit is applicable for on-road 4 wheel

vehicle purpose only. Use for tractor, fork

truck, bulldozer, off road vehicle, 2 or 3

wheel motor bicycle, marine boat or other

special purpose vehicle is not appropriate.

Flip Down Panel

This unit uses a flip-down structure that makes

possible large-size displays.

2. When the inside of the car is very cold and

the player is used soon after switching on the

heater moisture may form on the disc or the

optical parts of the player and proper

CAUTION

When opening and closing the FLIP DOWN

PANEL, be careful not to catch your fingers.

They could be injured.

playback may not be possible. If moisture

forms on the disc, wipe it off with a soft cloth.

If moisture forms on the optical parts of the

player, do not use the player for about one

hour. The condensation will disappear

naturally allowing normal operation.

1. Always use this unit with the FLIP DOWN

PANEL closed.

2. Do not force operations or use this device

abnormally when opening or closing the

FLIP DOWN PANEL.

3. Driving on extremely bumpy roads which

cause severe vibration may cause the sound

to skip.

3. Do not use the FLIP DOWN PANEL as a tray

to place objects on when it is open.

4. When closing the FLIP DOWN PANEL, do

not press the [OPEN] button.

INFORMATION FOR USERS:

5. Strong impacts to the operating or display

section can cause damage or deformation.

CHANGES OR MODIFICATIONS TO THIS

PRODUCT NOT APPROVED BY THE

MANUFACTURER WILL VOID THE

WARRANTY.

6. If the FLIP DOWN PANEL does not open

fully, gently open it with your hand.

DXZ378RMP/DXZ379RMP

Handling Compact Discs

Use only compact discs bearing the

Storage

• Do not expose compact discs to direct

sunlight or any heat source.

mark.

Do not play heart-shaped, octagonal, or other

specially shaped compact discs.

• Do not expose compact discs to excess

humidity or dust.

Some CDs recorded in CD-R/CD-RW mode

may not be usable.

• Do not expose compact discs to direct heat

from heaters.

Handling

Cleaning

• Compared to ordinary music CDs, CD-R and

CD-RW discs are both easily affected by high

temperature and humidity and some of CD-R

and CD-RW discs may not be played.

Therefore, do not leave them for a long time

in the car.

• To remove fingermarks and dust, use a soft

cloth and wipe in a straight line from the

center of the compact disc to the

circumference.

• Do not use any solvents, such as

commercially available cleaners, anti-static

spray, or thinner to clean compact discs.

• New discs may

Ball-point pen

have some

• After using special compact disc cleaner, let

the compact disc dry off well before playing it.

roughness

Roughness

around the

edges. If such

discs are used,

the player may

not work or the

sound may

skip. Use a ball-point pen or the like to

remove any roughness from the edge of the

disc.

• Never stick labels on the surface of the

compact disc or mark the surface with a

pencil or pen.

• Never play a compact disc with any

cellophane tape or other glue on it or with

peeling off marks. If you try to play such a

compact disc, you may not be able to get it

back out of the CD player or it may damage

the CD player.

• Do not use compact discs that have large

scratches, are misshapen, cracked, etc. Use

of such discs may cause misoperation or

damage.

• To remove a compact disc from its storage

case, press down on the center of the case

and lift the disc out, holding it carefully by the

edges.

• Do not use commercially available CD

protection sheets or discs equipped with

stabilizers, etc. These may damage the disc

or cause breakdown of the internal

mechanism.

DXZ378RMP/DXZ379RMP

2. NOMENCLATURE

Note:

• Be sure to read this chapter referring to the front diagrams of chapter “CONTROLS” on page ii (unfold).

Names of the Buttons and Their Functions

[OPEN] button

• Deeply push in [OPEN] button to unlock the

[ROTARY] knob

• Adjust the volume by turning the knob

flip down panel.

clockwise or counterclockwise.

[DIRECT] buttons

• Store a station into memory or recall it directly

[BND] button

• Switch the band, or seek tuning or manual

while in the radio mode.

tuning while in the radio mode.

• Play a first track while in the CD/MP3/WMA

mode.

[SCN] button

• Perform scan play for 10 seconds of each

track while in the CD/MP3/WMA mode.

• Press the button to change the character.

• Press and hold the button for 1 second or

longer to perform folder scan play while in the

MP3/WMA mode.

[

] (SOUND) button

• Use the button to switch to the sound adjust

mode.

[RPT] button

• Perform repeat play while in the CD/MP3/

WMA mode.

• Press and hold the button for 1 second or

longer to turn on or off the MAGNA BASS

EXTEND mode.

• Press and hold the button for 1 second or

longer to perform folder repeat play while in

the MP3/WMA mode.

[DISP] button

• Switch the display indication.

• Press and hold the button for 1 second or

longer to enter the adjust mode.

[RDM] button

• Perform random play while in the CD/MP3/

WMA mode.

[TA] button

• Use the button to set the TA (Traffic

Announcement) standby mode.

• Press and hold the button for 1 second or

longer to perform folder random play while in

the MP3/WMA mode.

[x], [v] buttons

• Select a station while in the radio mode or

select a track while in the CD/MP3/WMA

mode.

[SRC] button

• Press the button to turn on the power.

• Press and hold the button for 1 second or

longer to turn off the power.

This button is used to make various settings.

• Press and hold the button for 1 second or

longer to enter the fast-forward or fast-

backward mode.

• Switch the operation mode among the radio

mode, etc.

[

] button

[w] (UP), [z] (DN) buttons

• Select the folder while in the MP3/WMA

mode.

• Perform preset scan while in the radio mode.

When the button is pressed and held, auto

store is performed.

• Use the buttons to perform various settings.

• Play or pause a track while in the CD/MP3/

WMA mode.

[Q] (EJECT) button

• Eject a disc when it is loaded into the unit.

• Confirm various settings.

[CD SLOT]

• CD insertion slot.

[IR RECEIVER]

• Receiver for remote control unit. (Operating

range: 30° in all directions)

[AUX] input jack

• The input jack for connecting an external

device.

DXZ378RMP/DXZ379RMP

Display Items

Operation status indication

Titles, band, preset channel, track No.,

disc No., folder No., etc. are displayed.

Operation status indication

Source, Titles, CT (clock time) are displayed.

Z-ENHANCER 1, 2, 3 indication

: Manual indication

: Enter indication

: Disc No. indication

Preset channel

indication (1 to 6)

: MP3 indication

: WMA indication

: Alternative frequency indication

: Regional indication

: Traffic announcement indication

: Traffic programme indication

: Programme type indication

: Information indication for DAB

: DAB indication

: Stereo indication for DAB

: Disc or folder random/repeat/scan indication

: Random indication

: Repeat indication

: Scan indication

: MAGNA BASS EXTEND indication

: Mute indication

LCD Screen

In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.

The screen will recover when it returns to normal temperature.

DXZ378RMP/DXZ379RMP

3. DCP

The control panel can be detached to prevent

theft. When detaching the control panel, store it

in the DCP (DETACHABLE CONTROL PANEL)

case to prevent scratches.

Attaching the DCP

1. Insert the right side of the DCP into the main

unit.

2. Insert the left side of the DCP into the main

unit.

We recommend taking the DCP with you when

leaving the car.

Removing the DCP

1. Press the [SRC] button for 1 second or

longer to turn off the power.

2. Deeply push in [OPEN] button to unlock the

flip down panel.

DCP

∗ If the flip down panel does not open fully,

gently open it with your hand.

[

] button

OPEN

Storing the DCP in the DCP Case

Hold the DCP, in the orientation as shown in the

figure below, and put it into the supplied DCP

case. (Ensure the DCP is in the correct

orientation.)

DCP

3. Pull the DCP toward you and remove it.

DCP

DCP case

CAUTION

• The DCP can easily be damaged by

shocks. After removing it, be careful not to

drop it or subject it to strong shocks.

4. Close the HOLD FLAP.

• If the FLIP DOWN PANEL is kept open, the

DCP may drop due to vibration of the car.

This results in damage to the DCP. So

close the FLIP DOWN PANEL or remove

the DCP to store into the case.

• The connector connecting the source unit

and the DCP is an extremely important

part. Be careful not to damage it by

pressing on it with fingernails,

screwdrivers, etc.

HOLD FLAP

CAUTION

Be sure to close the HOLD FLAP for safety

when removing the DCP.

Note:

• If the DCP is dirty, wipe off the dirt with a soft, dry

cloth only.

DXZ378RMP/DXZ379RMP

4. REMOTE CONTROL

Functions of Remote Control Unit Buttons

∗ Some buttons on the remote control unit have different functions from the corresponding buttons on the main

unit.

Signal transmitter

[

]

[

]

SRC

BND

]

[

], [

[

], [

]

[

MUTE

DISP

[

]

PTY

[

]

[

]

PS/AS

[AF] button

• Press to cancel an emergency broadcast

during an ALARM interrupt.

● Shared modes

[SRC] button

• Use to alternate operation mode among the

various modes.

[PTY] button

• Press to cancel a PTY broadcast during a

PTY interrupt.

• Press to cancel a traffic announcement

broadcast, an emergency broadcast, and a

PTY broadcast during a TA, ALARM or PTY

interrupt.

[DISP] button

• Press to alternate among main display, title

display and CT (clock time) display.

[w], [z] buttons

• Increases and decreases volume.

● Radio (RDS) / DAB modes

[BND] button

[MUTE] button

• Turns mute function on and off.

• Switches reception band.

[TA] button

• TA on and off.

[x], [v] buttons

• Moves preset channels up and down.

• Press to cancel a traffic announcement

broadcast during a TA interrupt.

[PS/AS] button

• Press to perform preset scan.

• Press and hold the button for 2 seconds or

longer to perform auto store.

DXZ378RMP/DXZ379RMP

Functions of Remote Control Unit Buttons

• Press and hold the button for 1 second or

longer to perform disc repeat play.

[AF] button

• AF function on and off.

[PTY] button

• Press to perform random play.

• Press and hold the button for 1 second or

longer to perform REG function on and off.

• Press and hold the button for 1 second or

longer to perform disc random play.

[PTY] button

• PTY mode on and off.

● iPod BB mode

● CD/MP3/WMA modes

[BND] button

• Press to play the first track.

[x], [v] buttons

• Press to move the tracks up and down.

• Press and hold the button for 1 second or

longer to perform fast-forward/fast-backward.

[x], [v] buttons

• Press to move the tracks up and down.

[

] button

• Press and hold the button for 1 second or

longer to perform fast-forward/fast-backward.

• Switches between playback and pause.

[AF] button

[

] button

• Press to perform repeat play.

• Switches between playback and pause.

• Press and hold the button for 1 second or

longer to perform all repeat play.

[PS/AS] button

• Press to perform scan play.

[PTY] button

• Press to perform random play.

• When in MP3/WMA mode, press and hold the

button for 1 second or longer to perform

folder scan play.

• Press and hold the button for 1 second or

longer to perform all random play.

[AF] button

• Press to perform repeat play.

● TV mode

[BND] button

• Switches reception band.

• When in MP3/WMA mode, press and hold the

button for 1 second or longer to perform

folder repeat play.

[PTY] button

• Press to perform random play.

[x], [v] buttons

• Moves preset channels up and down.

• When in MP3/WMA mode, press and hold the

button for 1 second or longer to perform

folder random play.

[PS/AS] button

• Press to perform preset scan.

• Press and hold the button for 2 seconds or

longer to perform auto store.

● CD changer/DVD changer modes

[BND] button

• Press to switch to next disc in ascending

[PTY] button

• Press to alternate between TV and VTR.

order.

[x], [v] buttons

• Press to move the tracks up and down.

• Press and hold the button for 1 second or

longer to perform fast-forward/fast-backward.

[

] button

• Switches between playback and pause.

[PS/AS] button

• Press to perform scan play.

• Press and hold the button for 1 second or

longer to perform disc scan play.

[AF] button

• Press to perform repeat play.

DXZ378RMP/DXZ379RMP

Inserting the Battery

1Turn over the remote control unit and slide

the cover in the direction indicated by the

arrow in the illustration.

2Insert the battery (CR2025) into the insertion

guides, with the printed side (+) facing

upwards.

3Press the battery in the direction indicated by

the arrow so that it slides into the

compartment.

4Replace the cover and slide in until it clicks

into place.

Notes:

Misuse may result in rupture of the battery,

producing leakage of fluid and resulting in personal

injury or damage to surrounding materials. Always

follow these safety precautions:

Insertion guide

• Use only the designated battery.

• When replacing the battery, insert properly, with

+/– polarities oriented correctly.

• Do not subject battery to heat, or dispose of in fire

or water. Do not attempt to disassemble the

battery.

• Dispose of used batteries properly.

DXZ378RMP/DXZ379RMP

5. OPERATIONS

Note:

• Be sure to read this chapter referring to the front diagrams of chapter “CONTROLS” on page ii (unfold).

Basic Operations

Adjusting the volume

1. Turning the [ROTARY] knob clockwise

increases the volume; turning it

counterclockwise decreases the volume.

∗ The volume level is from 0 (minimum) to 33

(maximum).

CAUTION

Be sure to lower the volume before

switching off the unit power or the ignition

key. The unit remembers its last volume

setting. If you switch the power off with the

volume up, when you switch the power back

on, the sudden loud volume may hurt your

Switching the display

Press the [DISP] button to select the desired

hearing and damage the unit.

display.

Turning on/off the power

Note:

∗ Once selected, the preferred display becomes

the display default. When a function

• Be careful about using this unit for a long time

without running the engine. If you drain the car’s

battery too far, you may not be able to start the

engine and this can reduce the service life of the

battery.

adjustment such as volume is made, the

screen will momentarily switch to that

function’s display, then revert back to the

preferred display several seconds after the

adjustment.

1. Press the [SRC] button.

∗ For information on how to enter a title, refer to

the subsection “Entering titles” in section

“Operations Common to Each Mode”.

∗ When CT data is not received, “CT– –:– –”

appears in the display.

2. The illumination and display on the unit light

up. The unit automatically remembers its last

operation mode and will automatically switch

to display that mode.

3. Press and hold the [SRC] button for 1

second or longer to turn off the power for the

unit.

Note:

• The first time this unit is turned on after the wire

connections are completed, it must be checked

what equipment is connected. When the power is

turned on, the “SYSTEM CHECK” appears in the

display. The system check starts within the unit.

When the system check is complete, press the

[SRC] button again.

Selecting a mode

1. Press the [SRC] button to change the

operation mode.

2. Each time you press the [SRC] button, the

operation mode changes in the following

order:

Radio ➜ (DAB) ➜ CD/MP3/WMA ➜ (iPod

BB) ➜ (CD changer) ➜ (DVD changer) ➜

(TV) ➜ AUX ➜ Radio...

∗ External equipment not connected with

CeNET is not displayed.

DXZ378RMP/DXZ379RMP

Basic Operations

When “IMPACT” is set:

Sound Adjustment

You can adjust a sound effect or tone quality to

your preference.

3-2. Press the [ ] button.

3-3. Press the [w] or [z] button to adjust the

bass and treble in the range of +3 to –3.

∗ The factory default setting is “0”.

To change sound setting

3-4. Press the [

mode.

] button to return to previous

1. Press the [

] button to switch to the

sound adjustment selection display.

∗ The factory default sound setting is “Z-

EHCR”.

When “B-BOOST” is set:

3-2. Press the [ ] button.

3-3. Press the [w] or [z] button to adjust the

2. Then press the [x] or [v] button to

bass in the range of +3 to –3.

select the sound adjustment mode.

∗ The factory default setting is “0”.

Each time you press the [x] or [v]

button, the sound adjustment mode

changes as following order:

3-4. Press the [

mode.

] button to return to previous

● Adjusting the bass

This adjustment can be performed only when

the Z-Enhancer is set to “OFF”.

“Z-EHCR” ↔ “BASS” ↔ “TREBLE” ↔

“BALANCE” ↔ “FADER”

∗ In the case of display blinking “ENT”, you

2-1. Select “BASS”.

can press the [

setting value.

] button to adjust the

3-1. Press the [w] or [z] button to adjust the

3. Press the [w] or [z] button to adjust the

bass.

selected audio mode.

∗ The factory default setting is “0”.

(Adjustment range: +8 to –8)

4. After completing settings, press the [

button to return to the previous mode.

]

● Adjusting the treble

This adjustment can be performed only when

the Z-Enhancer is set to “OFF”.

● Setting the Z-Enhancer

This unit are provided with 3 types of sound

tone effects stored in memory.

2-1. Select “TREBLE”.

3-1. Press the [w] or [z] button to adjust the

treble.

Select the one you prefer.

∗ The factory default setting is “OFF”.

2-1. Select “Z-EHCR”.

∗ The factory default setting is “0”.

(Adjustment range: +7 to –7)

● Adjusting the balance

2-1. Select “BALANCE”.

3-1. Each time you press the [w] or [z]

button, the tone effect changes in the

following order:

3-1. Press the [w] or [z] button to adjust the

balance of the right and left speakers.

“EXCITE” ↔ “IMPACT” ↔ “B-BOOST” ↔

“OFF”

∗ The factory default setting is “CENTER”

(center). (Adjustment range: RIGHT12 to

LEFT12 (right 12 to left 12))

EXCITE : bass and treble emphasized

mid deemphasized

● Adjusting the fader

2-1. Select “FADER”.

IMPACT : bass and treble emphasized

B-BOOST : bass emphasized

3-1. Press the [w] or [z] button to adjust the

OFF

: no sound effect

balance of the rear and front speakers.

When “EXCITE” is set:

∗ The factory default setting is “CENTER”

(center). (Adjustment range: FRONT12 to

REAR12 (front 12 to rear 12))

3-2. Press the [

] button.

3-3. Press the [w] or [z] button to adjust the

Note:

bass and treble in the range of +3 to –3.

•

During SOUND adjustment mode, if no operation

is performed for more than 10 seconds, this

mode can be cancelled and return to previous

mode.

∗ The factory default setting is “0”.

3-4. Press the [

mode.

] button to return to previous

DXZ378RMP/DXZ379RMP

Basic Operations

Setting the MAGNA BASS EXTEND

CT (Clock Time) function

The MAGNA BASS EXTEND does not adjust

the low frequencies like the normal sound

adjustment function, but emphasizes the deep

bass frequencies to provide you with a dynamic

sound.

The CT function receives CT data sent from an

RDS station and displays the time.

∗ If a CT data is not being received, “CT– –:– –”

appears in the display.

Note:

∗ The factory default setting is “OFF” (off).

• CT data is not transmitted in some countries and

by some broadcast stations. Also, in some areas,

the CT may not display accurately.

1. Press and hold the [

] button for 1 second

or longer to turn on the MAGNA BASS

EXTEND effect. “M-B EX” lights in the

display.

2. Press and hold the [

] button for 1 second

or longer to turn off the MAGNA BASS

EXTEND effect. “M-B EX” goes off.

DXZ378RMP/DXZ379RMP

Radio Operations

● LOCAL SEEK

Listening to the radio

If the [x] or [v] button is pressed and held

in position for 1 second or longer, local seek

tuning will be enabled. Broadcast stations with

good reception sensitivity are selected.

∗ When local seeking starts, “LO SEEK” appears in

the display.

1. Press the [SRC] button and select the radio

mode. The frequency or PS and PTY

appears in the display.

∗ PS: Programme service name

∗ PTY: Programme type

2. Press the [BND] button and select the radio

band. Each time the button is pressed, the

radio reception band changes in the

following order:

Manual tuning

There are 2 ways available: Quick tuning and

step tuning.

FM1 ➜ FM2 ➜ FM3 ➜ AM (MW/LW) ➜

When you are in the step tuning mode, the

frequency changes one step at a time. In the

quick tuning mode, you can quickly tune the

desired frequency.

FM1...

3. Press the [x] or [v] button to tune in the

desired station.

1. Press the [BND] button and select the

Tuning

desired band (FM or AM (MW/LW)).

There are 3 types of tuning mode available,

seek tuning, manual tuning and preset tuning.

∗ If “MANU” is not lit in the display, press and

hold the [BND] button for 1 second or longer.

“MANU” is lit in the display and manual tuning

is now available.

Seek tuning

There are 2 types of seek tuning: DX SEEK and

LOCAL SEEK.

2. Tune into a station.

● Quick tuning

Press and hold the [x] or [v] button for 1

second or longer to tune in a station.

DX SEEK can automatically tune in to

receivable broadcast stations; LOCAL SEEK

can tune in to only broadcast stations with a

good reception sensitivity.

● Step tuning

Press the [x] or [v] button to manually tune

in a station.

1. Press the [BND] button and select the

desired band (FM or AM (MW/LW)).

∗ If no operation is performed for more than 7

seconds, manual tuning is cancelled and the

display returns to the previous mode.

2. Tune into a station.

∗ If “MANU” is lit in the display, press and hold

the [BND] button for 1 second or longer.

“MANU” in the display goes off and seek

tuning is now available.

∗ If “TA” is lit in the display, TP stations are

automatically sought.

● DX SEEK

Press the [x] or [v] button to automatically

seek a station.

When the [v] button is pressed, the station is

sought in the direction of higher frequencies; if

the [x] button is pressed, the station is sought

in the direction of lower frequencies.

∗ When seek tuning starts, “DX SEEK” appears in

the display.

DXZ378RMP/DXZ379RMP

Radio Operations

Recalling a preset station

Preset scan

A total of 24 preset positions (6-FM1, 6-FM2, 6-

FM3, 6-AM) exists to store individual radio

stations in memory. Pressing the corresponding

[DIRECT] button or the [w] / [z] button recalls

the stored radio frequency automatically.

Preset scan receives the stations stored in

preset memory in order. This function is useful

when searching for a desired station in memory.

1. Press the [ ] button.

2. When a desired station is tuned in, press the

1. Press the [BND] button and select the

[

] button again to continue receiving that

station.

Note:

• Be careful not to press and hold the [

desired band (FM or AM (MW/LW)).

2. Press the corresponding [DIRECT] button or

the [w] / [z] button to recall the stored

station.

] button

for 2 seconds or longer, otherwise the auto store

function is engaged and the unit starts storing

stations.

Note:

• Press and hold one of the [DIRECT] buttons for 2

seconds or longer to store that station into preset

memory.

Manual memory

1. Select the desired station with seek tuning or

manual tuning.

2. Press and hold one of the [DIRECT] buttons

for 2 seconds or longer to store the current

station into preset memory.

Auto store

Auto store is a function for storing up to 6

stations that are automatically tuned in

sequentially. If 6 receivable stations cannot be

received, a previously stored station remains

unoverwritten at the memory position.

1. Press the [BND] button and select the

desired band (FM or AM (MW/LW)).

2. Press and hold the [

] button for 2 seconds

or longer. The stations with good reception

are stored automatically to the preset

channels.

DXZ378RMP/DXZ379RMP

RDS Operations

4. Press the [DISP] button to return to the

RDS (Radio Data System)

This unit has a built-in RDS decoder system that

supports broadcast stations transmitting RDS

data.

previous mode.

∗ If the reception of the current broadcast station

deteriorates, “PI SEARCH” appears in the display

and the radio searches for the same programme

on another frequency.

This system can display the name of the

broadcast station being received (PS) and can

automatically switch to the broadcast station

with the best reception as you move long

distances (AF switching).

REG (Regional programme)

function

When the REG function is ON, the optimum

regional station can be received. When this

function is OFF, if the regional station area

switches as you drive, a regional station for that

region is received.

∗ The factory default setting is “OFF”.

Notes:

• This function is disabled when a national station

such as BBC R2 is being received.

• The REG function ON/OFF setting is valid when

the AF function is ON.

Also, if a traffic announcement or programme

type is broadcast from an RDS station, no

matter what mode you are in, this broadcast is

received.

Additionally, if EON information is received, this

information enables automatic switching of

other preset stations on the same network and

interruption of the station being received with

traffic information from other stations (TP). This

function is not available in some areas.

When using the RDS function, always set the

radio to FM mode.

1. Press and hold the [DISP] button for 1

second or longer to switch to the RDS

adjustment selection display.

• AF

• PS

: Alternative Frequency

: Programme Service Name

2. Press the [x] or [v] button to select

• PTY : Programme Type

“REG”.

• EON : Enhanced Other Network

3. Press the [w] or [z] button to select “ON”

• TP

: Traffic Programme

or “OFF”.

∗ RDS interrupt does not function during AM radio

reception or in TV mode.

∗ When set receives RDS signal, and can read PS

data, PS appears in the display.

• ON:

“REG” in the display lights and REG function

turns on.

• OFF:

“REG” in the display goes off and REG

function turns off.

AF function

The AF function switches to a different

frequency on the same network in order to

maintain optimum reception.

4. Press the [DISP] button to return to the

previous mode.

∗ The factory default setting is “ON”.

1. Press and hold the [DISP] button for 1

second or longer to switch to the RDS

adjustment selection display.

2. Press the [x] or [v] button to select

“AF”.

3. Press the [w] or [z] button to select “ON”

or “OFF”.

• ON:

“AF” in the display lights and AF function

turns on.

• OFF:

“AF” in the display goes off and AF function

turns off.

DXZ378RMP/DXZ379RMP

RDS Operations

Manually tuning a regional station

in the same network

1. This function is valid when the AF function is

ON and the REG function is OFF.

Note:

Auto store function for TP stations

You can automatically store up to 6 TP stations

into preset memory. If the number of TP can be

received less than 6, broadcast stations already

stored in memory and left without being

overwritten.

• This function can be used when a regional

broadcast of the same network is received.

As “TA” lit in the display, press and hold the

[

] button for 2 seconds or longer. The TP

2. Press any one of the [DIRECT] buttons to

stations with the good reception sensitivity are

stored into preset memory.

∗ Even if you select FM1 or FM2, a TP station is

stored into memory for FM3.

call out the regional station.

3. If the reception condition of the called out

station is bad, press the [DIRECT] button of

the same number. The unit receives a local

station on the same network.

PTY (Programme Type)

This function enables you to listen to a

broadcast of the selected programme type even

if the unit is on a function mode other than radio.

∗ Some countries do not yet have PTY broadcast.

∗ In the TA standby mode, a TP station has priority

over a PTY broadcast station.

TA (Traffic Announcement)

In the TA standby mode, when a traffic

announcement broadcast starts, the traffic

announcement broadcast is received as top

priority regardless of the function mode so you

can listen to it. Traffic programme (TP)

automatic tuning is also possible.

∗ The factory default setting is “OFF”.

1. Press and hold the [DISP] button for 1

second or longer to switch to the RDS

adjustment selection display.

∗ This function can only be used when “TP” is lit in

the display. When “TP” is lit, this means that the

RDS broadcast station being received has traffic

announcement programmes.

2. Press the [x] or [v] button to select

● Setting the TA standby mode

“PTY”.

If you press the [TA] button when only “TP” is lit

in the display, “TP” and “TA” light in the display

and the unit is set into the TA standby mode

until a traffic announcement is broadcast. When

a traffic announcement broadcast starts, “TRA

INFO” appears in the display. If you press the

[TA] button while a traffic announcement

broadcast is being received, the traffic

3. Press the [w] or [z] button to select “ON”

or “OFF”.

• ON:

“PTY” in the display lights and PTY standby

mode is turned on. When the selected PTY

broadcast starts, the PTY item name

appears in the display.

• OFF:

announcement broadcast reception is cancelled

and the unit goes into the TA standby mode.

“PTY” in the display goes off and PTY

standby mode is cancelled.

● Cancelling the TA standby mode

As “TP” and “TA” lit in the display, press the [TA]

button. The “TA” in the display goes off and the

TA standby mode is cancelled.

∗ If “TP” is not lit, pressing the [TA] button searches

for a TP station.

4. Press the [DISP] button to return to the

previous mode.

● Cancelling a PTY interrupt broadcast

Press the [TA] button during the PTY interrupt

broadcast, the PTY interrupt is cancelled and

the unit returns to PTY standby mode.

● Searching for a TP station

When “TP” is not lit, if you press the [TA] button,

“TA” in the display lights and the unit

automatically receives a TP station.

Note:

• If a TP station is not received, the unit continues

the search operation. Pressing [TA] button again

goes off “TA” in the display and stops TP station

searching.

DXZ378RMP/DXZ379RMP

RDS Operations

Selecting PTY

1. Press and hold the [DISP] button for 1

second or longer to switch to the RDS

adjustment selection display.

4. Press the [w] or [z] button to select the

desired PTY.

The 29 types of PTY below can be selected.

5. If you press and hold any one of the

[DIRECT] buttons for 2 seconds or longer,

the selected PTY is stored into that preset

channel memory.

2. Press the [x] or [v] button to select

“PTY SELECT”.

3. Press the [

] button.

PTY item

4. Press any one of the [DIRECT] buttons.

Alternatively, press the [w] or [z] button to

select the desired PTY.

ENGLISHe

Newsa

ContentsA

News

5. Press the [DISP] button to return to the

Affairsa

Infoa

Today’s events

Information

Sports

previous mode.

∗ Below are the factory default settings stored

for the [DIRECT] buttons.

Sporta

PTY item

Preset

number

Educatea

Dramaa

Culturea

Sciencea

Varieda

Education

Drama

ENGLISHd ContentsA

Newsb

Info

News

Culture

Information

Science

Pop M

Sport

Pop Music

Variety

Sports

Pop Ma

Pop music

Rock music

Easy music

Light music

Classics

Easy M

Serious Classical Music

Easy Listening Music

Rock Ma

Easy Ma

Light Ma

Classicsa

Other Ma

Weathera

Financea

Childrena

Sociala

∗ The PTY select mode is cancelled

automatically 7 seconds after a PTY is

selected.

Other music

Weather

Finance

PTY seek

1. Press and hold the [DISP] button for 1

second or longer to switch to the RDS

adjustment selection display.

For children

Social

2. Press the [x] or [v] button to select

Religiona

Phone Ina

Travela

Religion

“PTY SELECT”.

Phone in

Travel

3. Press the [

] button.

4. Press the [v] button to search for a PTY

broadcast in the direction of higher

Leisurea

Jazza

Leisure

frequencies; press the [x] button to search

in the direction of lower frequencies.

Jazz

Countrya

Nation Ma

Oldiesa

Country

∗ If no station with the selected PTY broadcast

can be received, the unit returns to the PTY

select mode.

Nation music

Oldies

Folk Ma

Documenta

Folk music

Documentaries

PTY preset memory

1. Press and hold the [DISP] button for 1

second or longer to switch to the RDS

adjustment selection display.

2. Press the [x] or [v] button to select

“PTY SELECT”.

3. Press the [

] button.

DXZ378RMP/DXZ379RMP

RDS Operations

Emergency broadcast

Volume setting of TA, emergency

broadcast (Alarm) and PTY

The volume for TA, Alarm and PTY interrupts

can be set during TA, Alarm or PTY interrupt.

If an emergency broadcast is received, all the

function mode operations are stopped.

“ALARM !” appears in the display and the

emergency broadcast can be heard.

∗ The factory default setting is “15”.

● Cancelling an emergency broadcast

If you press the [TA] button, emergency

broadcast reception is cancelled.

During a TA, Alarm or PTY interrupt, turn the

[ROTARY] knob to set the volume to the

desired level (0 to 33).

∗ When the TA, Alarm or PTY interrupt ends, the

volume returns to the level it had before the

interrupt.

Switching the PTY display language

You can select one of 4 languages (English,

German, Swedish or French) for the PTY

displayed in the display.

∗ The factory default setting is “ENGLISH”.

1. Press the [DISP] button to switch to the

adjustment selection display.

2. Press the [x] or [v] button to select

“LANGUAGE”.

3. Press the [w] or [z] button to select the

desired language.

4. Press the [DISP] button to return to the

previous mode.

DXZ378RMP/DXZ379RMP

CD/MP3/WMA Operations

Precautions when creating MP3/

WMA disc

● Usable sampling rates and bit rates

1. MP3: Sampling rate 8 kHz-48 kHz,

Bit rate 8 kbps-320 kbps / VBR

2. WMA: Bit rate 48 kbps-192 kbps

MP3/WMA

What is MP3?

MP3 is an audio compression method and

classified into audio layer 3 of MPEG standards.

This audio compression method has penetrated

into PC users and become a standard format.

● File extensions

This MP3 features the original audio data

compression to about 10 percent of its initial

size with a high sound quality. This means that

about 10 music CDs can be recorded on a CD-

R disc or CD-RW disc to allow a long listening

time without having to change CDs.

1. Always add a file extension “.MP3” or

“.WMA” to MP3 or WMA file by using single

byte letters. If you add a file extension other

than specified or forget to add the file

extension, the file cannot be played.

2. Files without MP3/WMA data will not play.

The indication “– –:– –” appears in the play

time display if you attempt to play files

without MP3/WMA data.

What is WMA?

WMA is the abbreviation of Windows Media

Audio, an audio file format developed by

Microsoft Corporation.

● Logical format (File system)

1. When writing MP3/WMA file on a CD-R disc

or CD-RW disc, please select “ISO9660 level

1, 2 or JOLIET or Romeo” as the writing

software format. Normal play may not be

possible if the disc is recorded on another

format.

Notes:

• If you play a file with DRM (Digital Rights

Management) for WMA remaining ON, no audio

is output (The WMA indicator blinks).

• Windows Media™, and the Windows ® logo are

trademarks, or registered trademarks of Microsoft

Corporation in the United States and/or other

countries.

2. The folder name and file name can be

displayed as the title during MP3/WMA play

but the title must be within 64 single byte

alphabetical letters and numerals (including

an extension).

● To disable DRM (Digital Rights

Management)

1. When using Windows Media Player 8, click

on TOOLS ➜ OPTIONS ➜ COPY MUSIC

tab, then under COPY SETTINGS, unclick

the check box for PROTECT CONTENT.

Then, reconstruct files.

3. Do not affix a name to a file inside a folder

having the same name.

● Folder structure

1. A disc with a folder having more than 8

hierarchical levels will be impossible.

2. When using Windows Media Player 9, click

on TOOL ➜ OPTIONS ➜ MUSIC RECORD

tab, then under Recording settings, unclick

the Check box for RECORD PROTECTED

MUSIC. Then, reconstruct files.

● Number of files or folders

1. Up to 255 files can be recognized per folder.

Up to 510 files can be played.

2. Tracks are played in the order that they were

recorded onto a disc. (Tracks might not

always be played in the order displayed on

the PC.)

Personally constructed WMA files are used

at your own responsibility.

3. Some noise may occur depending on the

type of encoder software used while

recording.

DXZ378RMP/DXZ379RMP

CD/MP3/WMA Operations

Set the type of file to be played

(multi-session function)

Listening to a disc already loaded

in the unit

When a single disc holds both normal CD type

tracks and MP3/WMA type tracks, use this

command to select which type of track to play.

Press the [SRC] button to select the CD/MP3/

WMA mode.

When the unit enters the CD/MP3/WMA mode,

play starts automatically.

∗ Default setting is “MULTI-SESS CD”.

• When only one type of track (either music CD

or MP3/WMA) is recorded on a disc, selecting

either type will allow playback of the disc.

If there is no disc loaded, the indication “NO

DISC” appears in the title display.

The mode changes each time the [SRC] button

is pressed. (Modes are not displayed for

equipment that is not connected.)

• When playing CCCD (copy-control CDs), set

to CD type.

1. Press and hold the [BND] button for 1

Radio ➜ (DAB) ➜ CD/MP3/WMA ➜ (iPod BB)

➜ (CD changer) ➜ (DVD changer) ➜ (TV) ➜

AUX ➜ Radio ...

second or longer.

Each time the button is held pressed in this

way, the playback type alternates between

CD type and MP3/WMA type.

Loading a CD

1. Press the [OPEN] button to access the CD

• MULTI-SESS CD

When playing music CD only.

• MULTI-SESS MP3

SLOT behind the FLIP DOWN PANEL.

2. Insert a CD into the center of the CD SLOT

with the labeled side facing up. The CD plays

automatically after loading.

When playing music MP3/WMA only.

2. When setting is completed, remove the disc

and reinsert it.

Notes:

• Never insert foreign objects into the CD SLOT.

• If the CD is not inserted easily, there may be

another CD in the mechanism or the unit may

require service.

Backup Eject function

Just pressing the [Q] button, ejects the disc

even if the power to the unit was not turned on.

• Discs not bearing the

mark and

1. Press the [OPEN] button to open the FLIP

DOWN PANEL.

Note:

CD-ROMs cannot be played by this unit.

• Some CDs recorded in CD-R/CD-RW mode may

not be usable.

• If the FLIP DOWN PANEL will not open far

enough, open it gently with your hand.

3. Close the FLIP DOWN PANEL.

2. Press the [Q] button. Remove the disc after

it is ejected.

CAUTION

Be careful not to catch your hand or fingers

while closing the FLIP DOWN PANEL.

3. Close the FLIP DOWN PANEL.

Notes:

• Always close the FLIP DOWN PANEL once you

take out the disc.

• If you force a CD into before auto reloading, this

can damage the CD.

• If a CD (12 cm) is left in the ejected position for 15

seconds, the CD is automatically reloaded (Auto

reload).

Notes:

• If the FLIP DOWN PANEL does not open fully,

gently open with your hand.

• After loading a CD, always close the FLIP DOWN

PANEL.

DXZ378RMP/DXZ379RMP

CD/MP3/WMA Operations

Pausing play

Fast-forward/fast-backward

1. Press the [

] button to pause play.

● Fast-forward

1. Press and hold the [v] button for 1 second

“PAUSE” appears in the display.

or longer.

2. To resume CD play, press the [

again.

] button

● Fast-backward

1. Press and hold the [x] button for 1 second

or longer.

∗ For MP3/WMA discs, it takes some time until the

start of searching and between tracks. In addition,

the playing time may have a margin of error.

Displaying CD titles

This unit can display title data for CD-text/MP3/

WMA disc and user titles input with this unit.

1. Each time you press the [DISP] button to

change the title display.

Folder Select

This function allows you to select a folder

containing MP3/WMA files and start playing

from the first track in the folder.

● CD-TEXT disc

User ➜ Track ➜ Disc (Artist) ➜ User ...

● MP3/WMA disc

Track ➜ Folder ➜ Title (Album) ➜ Artist ➜

Track ...

Notes:

• If the CD playing is not a CD-text CD or no user

title has been input, “NO TITLE” appears in the

display.

1. Press the [z] or [w] button.

Press the [w] button to move the next

folder. Press the [z] button to move the

previous folder.

2. To select a track, press the [x] or [v]

button.

• If MP3/WMA disc is not input TAG, “NO TAG”

appears in the display.

Top function

The top function resets the CD player to the first

track of the disc. Press the [BND] button to play

the first track (track No. 1) on the disc.

∗ In case of MP3/WMA, the first track of a folder

being played will be returned.

• For MP3, supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0.

• Tag displays give priority to V2.3 / 2.2.

• In the case of album Tags for WMA, the

information written into the extension header is

displayed.

• Only ASCII characters can be displayed in Tags.

Selecting a track

● Track-up

1. Press the [v] button to move ahead to the

beginning of the next track.

2. Each time you press the [v] button, the

track advances ahead to the beginning of the

next track.

● Track-down

1. Press the [x] button to move back to the

beginning of the current track.

2. Press the [x] button twice to move back to

the beginning of the previous track.

DXZ378RMP/DXZ379RMP

CD/MP3/WMA Operations

● Folder repeat play

Other various play functions

This function allows you to play a track currently

being played in the MP3/WMA folder

repeatedly.

● Scan play

This function allows you to locate and play the

first 10 seconds of all the tracks recorded on a

disc.

1. Press and hold the [RPT] button for 1 second

or longer to perform folder repeat play.

1. Press the [SCN] button to perform scan play.

“ALL RPT” appears in the display.

“TRACK SCN” appears in the display.

∗ Scan play starts from the next track after the

track currently being played.

● Random play

This function allows you to play all tracks

recorded on a disc in a random order.

● Folder scan play

1. Press the [RDM] button to perform random

This function allows you to locate and play the

first 10 seconds of the first track of all the folders

on an MP3/WMA disc.

play.

“TRACK RDM” appears in the display.

1. Press and hold the [SCN] button for 1

● Folder random play

second or longer to perform folder scan play.

This function allows you to play all the tracks of

all the folders recorded on an MP3/WMA disc in

a random order.

“ALL SCN” appears in the display.

∗ Folder scan play starts from the next folder

after the folder currently being played.

1. Press and hold the [RDM] button for 1

second or longer to perform folder random

play.

● Repeat play

This function allows you to play the current track

“ALL RDM” appears in the display.

repeatedly.

1. Press the [RPT] button to perform repeat

● To cancel play

1. Press the operating button previously

play.

selected.

“TRACK RPT” appears in the display.

DXZ378RMP/DXZ379RMP

Operations Common to Each Mode

Each time you press the [w] or [z]

To change adjustment setting

button, the setting changes in the following

order:

1. Press and hold the [DISP] button for 1

second or longer to switch to the

adjustment selection display.

“MESSAGE” ↔ “ON” ↔ “OFF”

● Entering message information

Message up to 30 characters long can be stored

in memory and displayed as a type of screen

saver setting.

∗ The factory default setting is “WELCOME TO

CLARION”.

2. Press the [x] or [v] button to select

the “item name”.

“CONTRAST” ↔ “ILLUMI” ↔ “SCRN

SVR” ↔ “MESSAGE INPUT” ↔

“SCROLL” ↔ “DIMMER” ↔ “BLINK LED”

↔ “A-CANCEL” ↔ “TEL-SEL” ↔ “TEL-

SP” ↔ “TEL-SW” ↔ “SYSTEM CHECK”

2-1. Select “MESSAGE INPUT”.

3-1. Press the [

] button.

3-2. Press and hold the [BND] button for 1

3. Press the [w] or [z] button to select the

second or longer to clear the old message.

“desired setting value”.

3-3. Press the [x] or [v] button to move the

∗ In the case of display blinking “ENT”, you

can press the [

setting value.

] button to adjust the

cursor.

3-4. Press the [BND] button to select a

character type. Each time you press the

[BND] button, the character type changes

in the following order:

∗ After completing settings, press the [DISP]

button to return to the previous mode.

● Setting the contrast

You can adjust the display contrast to match the

angle of installation of the unit.

∗ The factory default setting is “10”. (Adjustment

level: 1 to 16)

Capital letters ➜ Numbers ➜ Symbols ➜

Umlaut ➜ Capital letters…

3-5. Press the [w] or [z] button to select the

desired character.

3-6. Repeat step 3-3 to 3-5 to enter up to 30

characters for message.

2-1. Select “CONTRAST”.

3-1. Press the [w] or [z] button to adjust the

3-7. Press and hold the [

] button for 2

contrast.

seconds or longer to store the message in

memory.

● Setting the button and the display

illumination (DXZ379RMP only)

∗ The factory default setting is “AMBER”.

2-1. Select “ILLUMI”.

∗ Press and hold the [BND] button for 1

second or longer to cancel the input

message. Then press and hold the [

]

button for 2 seconds or longer to store the

message and the message return to default

setting.

3-1. Press the [w] or [z] button to select

“GREEN” or “AMBER”.

● Turning the screen saver function on

or off

● Setting the method for title scroll

Set how to scroll in CD-TEXT, MP3/WMA title.

∗ The factory default setting is “ON”.

2-1. Select “SCROLL”.

This unit is provided with the screen saver

function which allows you to show various kinds

of patterns and characters in the operation

status indication area of the display in a random

order. You can turn on or off this function. If the

button operation is performed with the screen

saver function on, the operation display

corresponding to the button operation is shown

for about 30 seconds and the display returns to

the screen saver display.

3-1. Press the [w] or [z] button to select “ON”

or “OFF”.

• ON:

To scroll automatically.

• OFF:

To scroll just 1 time.

∗ The factory default setting is “ON”.

2-1. Select “SCRN SVR”.

3-1. Press the [w] or [z] button to select the

setting.

DXZ378RMP/DXZ379RMP

Operations Common to Each Mode

● Setting the dimmer control

You can set the dimmer control “ON” or “OFF”.

∗ The factory default setting is “ON”.

2-1. Select “DIMMER”.

● Setting the car speaker output for the

cellular phone

∗ The factory default setting is “RIGHT”.

∗ To output the telephone calls, set the cellular

phone interrupt to “ON”.

3-1. Press the [w] or [z] button to select “ON”

2-1. Select “TEL-SP”.

or “OFF”.

3-1. Press the [w] or [z] button to select

● Anti-theft indicator

“RIGHT” or “LEFT”.

The red Anti-theft indicator is a function for

preventing theft. When the DCP is removed

from the unit, this indicator blinks.

∗ The factory default setting is “OFF”.

2-1. Select “BLINK LED”.

• RIGHT:

Telephone calls can be heard on the front

right speaker connected to this unit.

• LEFT:

Telephone calls can be heard on the front

left speaker connected to this unit.

3-1. Press the [w] or [z] button to select “ON”

or “OFF”.

● Cellular phone interrupt setting

If you connect this unit and your cellular phone

with a separately sold cable, you can listen to

your telephone calls on your car speakers.

∗ The factory default setting is “OFF”.

2-1. Select “TEL-SW”.

● Setting the external amplifier

∗ The factory default setting is “OFF”.

2-1. Select “A-CANCEL”.

3-1. Press the [w] or [z] button to select “ON”

or “OFF”.

• ON:

3-1. Press the [w] or [z] button to select the

setting. Each time you press the [w] or

[z] button, the setting changes in the

following order:

Use with connected AMP.

• OFF:

Use with inside AMP.

● Set the cellular phone connection

“ON” ↔ “OFF” ↔ “MUTE”

mode (AUX/CeNET)

You can listen to your telephone calls from the

• ON:

You can listen to your telephone calls from

the speakers connected to this unit.

∗ When listening to your calls on your car

speakers, you can adjust the volume by

turning the [ROTARY] knob.

speakers connected to this unit.

∗ The factory default setting is “AUX”.

2-1. Select “TEL-SEL”.

3-1. Press the [w] or [z] button to select

• OFF:

“AUX” or “CENET”.

This unit continues normal operation even

when the cellular phone is used.

• AUX:

AUX input jack in front panel is for cellular

phone audio input, when the AUX input

jack is used to connect an AUX

BLUETOOTH BB (BLT373) (sold

separately).

• MUTE:

The sound from this unit is muted during

telephone calls.

Note:

• CENET:

• If connecting a hands-free kit, please ensure the

setting is ON to receive the telephone audio

through the system.

CENET input cable is for cellular phone

audio input, when a CeNET cable is used

to connect a cellular phone (BLT433 or

TEL-002) (sold separately).

DXZ378RMP/DXZ379RMP

Operations Common to Each Mode

● Performing a system check

This function allows you to perform a system

check from the adjust mode when required.

Clearing titles

1. Select and play a CD in the CD changer or

tune in to a TV station for which you want to

clear the title.

2-1. Select “SYSTEM CHECK”.

3-1. Press and hold the [

second or longer.

] button for 1

2. Press and hold the [DISP] button for 1

second or longer.

“SYSTEM CHECK” appears in the display,

then the unit returns to the previous

operation mode.

3. Press the [x] or [v] button to select

“TITLE INPUT”.

4. Press the [

] button.

The display switches to the title input display.

Entering titles

5. Press and hold the [BND] button for 1

Titles up to 10 characters long can be stored in

memory and displayed for CD, CD changer and

TV stations. The number of titles that can be

entered for each mode are as follows.

second or longer.

All characters in the title disappear.

6. Press and hold the [

] button for 2 seconds

or longer to store the setting.

Mode

Number of titles

50 titles

CD mode

TV mode

AUX function

20 titles

This system has an external input jack on the

front panel so you can listen to sounds and

music from external devices connected to this

unit.

CD changer mode

Number of titles

DCZ628 connected

100 titles

● Selecting AUX IN sensitivity

Make the following settings to select the

sensitivity when sounds from external devices

connected to this unit are difficult to hear even

after adjusting the volume.

∗ The factory default setting is “MID”.

1. Press and hold the [DISP] button for 1

1. Press the [SRC] button to select the mode

you want to enter a title (CD, CD changer or

TV).

2. Select and play a CD in the CD changer or

tune in to a TV station for which you want to

enter the title.

3. Press and hold the [DISP] button for 1

second or longer.

2. Select “AUX SENS”.

4. Press the [x] or [v] button to select

3. Press the [w] or [z] button to select

“TITLE INPUT”.

“LOW”, “MID” or “HIGH”.

5. Press the [

] button.

The display switches to the title input display.

6. Press the [x] or [v] button to move the

cursor.

7. Press the [BND] button to select a character

type. Each time you press the [BND] button,

the character type changes in the following

order:

Capital letters ➜ Numbers ➜ Symbols ➜

Umlaut ➜ Capital letters…

8. Press the [w] or [z] button to select the

desired character.

9. Repeat steps 6 to 8 to enter up to 10

characters for the title.

10.Press and hold the [

] button for 2 seconds

or longer to store the title into memory.

DXZ378RMP/DXZ379RMP

6. OPERATIONS OF ACCESSORIES

iPod BB Operations

● iPod BB

Other various play functions

(in Play mode)

This section describes operations when

connected to a CeNET iPod Interface (EA-

1276E). (Hereinafter, “iPod Interface (EA-

1276E)” is abbreviated as iPod BB.)

Notes:

• These functions are not supported when in the

iPod menu mode.

• The Random function set on the iPod or when

connected to iPod BB, remains the same after

attachment/ detachment of the iPod.

• The iPod BB can be set simultaneously for All

repeat and All random. The display will appear as

follows:

Note:

• See the iPod BB Owner’s Manual for details

regarding iPod BB connections and operation

conditions.

Connecting an iPod

When an iPod is connected to the iPod BB

interface, the “Repeat” set on the iPod will

become “All repeat play” instead. Likewise,

“Shuffle” set on the iPod will become as follows:

(Function)

All random

Random

All repeat

• “Shuffle (Albums)” play ➜ Random play

(Display)

• “Shuffle (Songs)” play ➜ All random play

The iPod BB interface has two modes, the “Play

mode” and the “iPod menu mode” for selecting

tracks. Switch between these modes by

pressing the [BND] button.

● Repeat play

Play back one track repeatedly.

1. Press the [RPT] button.

Select iPod BB Interface

1. Press the [SRC] button.

● All repeat play

Repeatedly play all tracks within a selected

Playback will begin from the last file that was

played on the iPod alone or through the iPod

BB.

category.

1. Press and hold the [RPT] button for 1 second

or longer.

Note:

● Random play

• The following operations in Play mode operate

the same as in CD mode:

Play all albums within a selected category, in

random order. (Corresponds to “Shuffle

(Albums)” command on iPod.)

∗Track selection: [x], [v]

∗Fast-forward/fast-backward: [x], [v]

1. Press the [RDM] button.

∗Pause: [

]

● All random play

See “CD/MP3/WMA Operations” (page 20-23)

for details.

Play all tracks within a selected category, in

random order. (Corresponds to “Shuffle

(Songs)” command on iPod.)

1. Press and hold the [RDM] button for 1

second or longer.

● To cancel play

1. Press the same play button once again.

Note:

• When the all repeat play mode is canceled,

playback will stop when all tracks have been

played.

DXZ378RMP/DXZ379RMP

iPod BB Operations

Selecting category from the iPod

Selecting category using preset

memory

1. Press the [BND] button to select the iPod

menu mode.

The iPod menu categories will be displayed.

The category can be set as follows in the

[DIRECT] (1-6) buttons.

Note:

[1] : PLAY LISTS

[2] : ARTISTS

[3] : ALBUMS

[4] : SONGS

• Repeat and Random mode operations are not

supported when in the iPod menu mode.

2. Press the [w] or [z] button to switch

between categories.

The iPod menu categories alternate in the

following order:

[5] : GENRES

[6] : COMPOSERS

“PLAY LISTS” ↔ “COMPOSERS” ↔

“GENRES” ↔ “SONGS” ↔ “ALBUMS” ↔

“ARTISTS” ↔ ...

2. Press the desired [DIRECT] (1-6) button to

select the category.

∗ Subfolders may be displayed, depending on

the category.

In this case, use the [w] and [z] buttons to

switch between subfolders, then use the [v]

button to select the desired subfolder.

Note:

The iPod menu mode can be canceled by

performing one of the following operations:

• Press the [BND] button.

• When the category select screen is displayed,

press the [v] button.

3. Press the [v] button to select the category.

4. When the track name display is showing,

3. When the track name display is showing,

press the [v] button.

Playback will begin from the first track in the

selected category, and the iPod menu mode

will be canceled.

press the [v] button.

Playback will begin from the first track in the

selected category, and the iPod menu mode

will be canceled.

∗ Use the [w] and [z] buttons to select a track

within a category.

∗ Subfolders may be displayed, depending on

About title display

This unit supports the display of title information

transmitted from a connected iPod.

the category.

In this case, use the [w] and [z] buttons to

switch between subfolders, then use the [v]

button to select the desired subfolder.

∗ When the track name display is showing,

pressing the [x] button will return to the

currently playing folder name display.

• Character code information is UTF-8;

displayable characters include English

alphanumerics, some symbols, and some

umlaut characters.

5. Use the [w] and [z] buttons to select a

• Unsupported characters will be replaced by

asterisks (*).

track within a category.

DXZ378RMP/DXZ379RMP

CD Changer Operations

Note:

Procedure to scroll a title

Set “SCROLL” to “ON” or “OFF”.

• The following operations are the same as for CD

mode:

∗Pause

∗Track selection

∗Fast-forward/fast-backward

∗Scan play

∗Repeat play

∗Random play

See “CD/MP3/WMA Operations” (page 20-23)

for details.

(The factory default setting is “ON”. Refer to the

subsection “Setting the method for title scroll”

in section “Operations Common to Each

Mode”.)

● When set to “ON”

The title is automatically kept scrolling.

● When set to “OFF”

To scroll just 1 time.

Selecting a CD

CD changer functions

1. Press the [w] or [z] button to select the

When an optional CD changer is connected

through the CeNET cable, this unit controls all

CD changer functions. This unit can control a

total of 2 changers.

desired disc.

∗ If a CD is not loaded in a slot of magazine,

pressing the [w] or [z] button can not work.

Press the [SRC] button and select the CD

changer mode to start play. If 2 CD changers

are connected, press the [SRC] button to select

the CD changer for play.

∗ If “NO MAG” appears in the display, insert the

magazine into the CD changer. “D-CHECK”

appears in the display while the player loads

(checks) the magazine.

Other various play functions

● Disc scan play

Disc scan play locates and plays the first 10

seconds of the first track on each disc in the

currently selected CD changer. This function

continues automatically until it is cancelled.

∗ Disc scan play is useful when you want to select a

desired CD.

∗ If “NO DISC” appears in the display, eject the

magazine and insert discs into each slot. Then,

reinsert the magazine back into the CD changer.

1. Press and hold the [SCN] button for 1

second or longer. “ALL SCN” appears in the

display and disc scan play starts.

Note:

• Some CDs recorded in CD-R/CD-RW mode may

not be usable.

● Disc repeat play

After all the tracks on the current disc have been

played, disc repeat play automatically replays

the current disc over from the first track. This

function continues automatically until it is

cancelled.

CAUTION

CD-ROM discs cannot be played from every

CD changer, it’s depended on the model.

1. Press and hold the [RPT] button for 1 second

or longer. “ALL RPT” appears in the display

and disc repeat play starts.

Displaying CD titles

This unit can display title data for CD-text CDs

and user titles input with this unit.

∗ Title data for CD-text CDs can be displayed with

this unit only when it is connected to DCZ628.

● Disc random play

The disc random play selects and plays

individual tracks or discs automatically in no

particular order. This function continues

automatically until it is cancelled.

1. Press the [DISP] button to change the title

display.

Notes:

• If the CD playing is not a CD-text CD or no user

title has been input, “NO TITLE” appears in the

display.

1. Press and hold the [RDM] button for 1

second or longer. “ALL RDM” appears in the

display and disc random play starts.

● To cancel play

1. Press the operating button previously

• If a CD-text CD is not input its disc title or a track

title, “NO TITLE” appears in the display.

selected.

DXZ378RMP/DXZ379RMP

DVD Changer Operations

Note:

By connecting an optional DVD changer that

supports CeNET wiring, this unit can be used to

control the DVD changer. To view DVDs, an

optional monitor is required.

• The following operations are the same as for CD

and CD Changer modes:

∗Pause

∗Track selection

∗Fast-forward/fast-backward

∗Scan play

∗Repeat play

∗Random play

• The DVD control and display functions

supported by this unit are limited; the unit

does not support all the functions possible on

a DVD changer.

For fullest functionality, use the remote

control unit provided with your DVD changer

to control its operations. For details, consult

the Owner’s Manual provided with your DVD

changer.

See “CD/MP3/WMA Operations” (page 20-23)

and “CD Changer Operations” (page 29) for

details.

DXZ378RMP/DXZ379RMP

TV Operations

Note:

Setting the TV area

When you select the TV area (TV reception

area), the TV tuner area setting changes.

• The following operations are performed the same

as for radio mode:

∗Channel selection

∗Storing channels in memory

∗Calling channels from memory

∗Auto store

1. Press and hold the [DISP] button for 1

second or longer to switch to the adjustment

selection display.

2. Press the [x] or [v] button to select “TV

∗Preset scan

See “Radio Operations” (page 14-15) for details.

AREA”.

3. Press the [w] or [z] button to select the

reception area.

TV tuner functions

4. Press the [DISP] button to return to the

When an optional TV tuner is connected

through the CeNET cable, this unit controls all

TV tuner functions. To watch TV requires a TV

tuner and monitor.

previous mode.

Setting the TV diver

You can change the reception setting for the TV

antenna connected to the TV tuner.

∗ The factory default setting is “ON”.

1. Press and hold the [DISP] button for 1

second or longer to switch to the adjustment

selection display.

Watching a TV

1. Press the [SRC] button and select the TV

mode.

2. Press the [BND] button to select the desired

TV band (TV1 or TV2). Each time the button

is pressed, the input selection toggles

between TV1 and TV2.

2. Press the [x] or [v] button to select “TV

DIVER”.

3. Press the [w] or [z] button to set to “ON” or

3. Press the [x] or [v] button to tune in the

“OFF”.

desired TV station.

• ON:

Sets the diver setting to ON.

• OFF:

Sets the diver setting to OFF.

Watching a video

The TV tuner has a VTR input terminal to which

1 external device can be connected. Connect a

12 V video cassette player (VCP) or video

cassette recorder (VCR) to the TV tuner input

terminal.

4. Press the [DISP] button to return to the

previous mode.

∗ The factory default setting is “TV”.

1. Press and hold the [DISP] button for 1

second or longer to switch to the adjustment

selection display.

2. Press the [x] or [v] button to select “TV/

VTR”.

3. Press and hold the [

] button for 1 second

or longer to set to “VTR”.

4. To return to the TV broadcast, press and

hold the [DISP] button for 1 second or longer

to switch to the adjustment selection display.

5. Press the [x] or [v] button to select “TV/

VTR”.

6. Press and hold the [

] button for 1 second

or longer to set to “TV”.

DXZ378RMP/DXZ379RMP

Digital Radio / DAB Operations

DAB control function

Switching programmes

When a CeNET cable is used to connect a DAB

(DAH923) (sold separately), all functions can be

operated.

1. Press the [SRC] button to receive a DAB

station.

2. Press the [x] or [v] button to switch

programmes in the DAB station.

Listening to the DAB station

Note:

1. Press the [SRC] button to select the DAB

• The programme name may be the same

depending on DAB programmes.

mode.

2. When the unit receives a DAB station, the

display changes in the following order:

Programme scan

Frequency channel ➜ service label

This function scans through each receivable

programme in a DAB station being received for

10 seconds sequentially. This is useful when

you want to search for a desired programme.

Switching displays

1. Press the [DISP] button to select the desired

display.

Notes:

• The number of programmes and broadcasting

times depend on the DAB stations.

1. Press the [SRC] button to receive a DAB

station.

2. Perform the following operation depending

on the connected model.

Press the [

] button. “SRVC SCN” appears

• When the strength of DAB signals is weak, audio

output is muted.

in the display and the unit starts scanning

each programme for 10 seconds

sequentially. Each time the main unit scans,

the programme name is shown in the

display.

Seek tuning

1. Press the [SRC] button to select the DAB

mode.

3. To stop programme scan when a desired

programme is tuned in.

2. Press and hold the [x] or [v] button for

1 second or longer.

Press the [

] button.

“DAB” lights up in the display when the main

unit receives a DAB station.

Manual memory

∗ The main unit stops the seek tuning when it

cannot find a DAB station. The display returns

to the previous mode.

The main unit has a manual memory function

for DAB programmes. Up to 18 programmes (6

programmes each) can be preset in the preset

buttons.

Manual tuning

1. Press the [SRC] button to select the DAB

[M1], [M2] and [M3]

1. Press the [SRC] button to select the DAB

mode.

2. Press and hold the [BND] button for 1

second or longer. “MANU” lights up in the

display.

2. Press and hold the [BND] button for 1

second or longer to select any one shown

above.

3. Press the [x] or [v] button to select a

station.

desired programme.

∗ If no operation is performed for more than 7

seconds, manual tuning is cancelled and the

display returns to the previous mode.

4. Press and hold one of the [DIRECT] buttons

(1 to 6) for 2 seconds or longer to store the

programme.

Note:

• The interrupt programme (PTY or INFO) cannot

be written into a manual memory.

DXZ378RMP/DXZ379RMP

Digital Radio / DAB Operations

Recalling a preset programme

● Information select

This is a function for selecting INFORMATION

ON or OFF in the Information interrupt mode.

1. Press the [SRC] button to select the DAB

mode.

You can set ON up to 6 information items.

You can select any of the 6 items below:

2. Press the [BND] button. Each time you press

the [BND] button, the display changes in the

following order:

INFORMATION item

[M1] ➜ [M2] ➜ [M3] ➜ [M1]...

ContentsA

ENGLISHe

Travelc

3. Press one of the [DIRECT] buttons or the

[w] / [z] button to recall a preset

programme.

Transport flash

Warning / Service

News flash

Warninga

Newsc

Note:

• Press and hold the [DIRECT] button for 2

seconds or longer to store the programme

currently being received. (Manual memory)

Weathera

Eventa

Area weather flash

Event announcement

Special event

Speciala

INFO (Announcement)

1. Perform the following operation depending

on the connected model.

In the INFO standby mode, when the selected

announcement programme starts, the main unit

switches to the selected announcement

programme automatically.

Press and hold the [DISP] button for 1

second or longer to switch to the RDS

adjustment selection display.

● Setting the INFO standby mode

2. Press the [x] or [v] button to select

“INFO SELECT”, then press the [ ] button

to enter “INFO SELECT” mode.

If you press and hold the [TA] button for 1

second or longer, “INFO” lights in the display

and the main unit is set into the INFO standby

mode until the selected announcement is

broadcast. When the selected announcement

broadcast starts, the announcement item

appears in the display. If you press and hold the

[TA] button for 1 second or longer while the

selected announcement broadcast is being

received, the selected announcement broadcast

reception is cancelled and the main unit goes

into the INFO standby mode.

3. Press the [x] or [v] button to select an

information item. You can select any of 6

items:

Travelc➜ Warninga➜ Newsc➜ Weathera

➜ Eventa➜ Speciala➜ Travelc➜ ...

4. Press the [w] or [z] button to set the

information item for ON or OFF.

5. Press the [ ] button to return to the

previous mode.

● Cancelling INFO standby mode

To cancel the INFO standby mode, press and

hold the [TA] button for 1 second or longer.

6. Press the [DISP] button to return to the

previous display.

DXZ378RMP/DXZ379RMP

Digital Radio / DAB Operations

● AF function between RDS and DAB

When the same programme is broadcasted by

both RDS and DAB, and this function is ON, the

unit switches to receive the broadcast with the

better reception automatically.

For the following items, see “RDS

Operations” on page 16.

● AF function

∗ If the reception of the current broadcast station

deteriorates, “SEARCHING” appears in the

display and the radio searches for the same

programme on another frequency.

∗ This function only operates when the DAH923

DAB unit, sold separately, is connected.

● TA (Traffic Announcement)

● PTY

● Emergency broadcast

● Switching the PTY and INFO display

language

∗ The factory default setting is “ON”.

1. Press and hold the [DISP] button for 1

second or longer to switch to the RDS

adjustment selection display.

2. Press the [x] or [v] button to select

● Volume setting of TA, INFO emergency

broadcast (ALARM) and PTY

“LINK ACT”.

3. Press the [w] or [z] button to select “ON”

or “OFF”.

• ON:

AF switching between DAB and RDS

enabled.

• OFF:

AF switching between DAB and RDS

disabled.

4. Press the [DISP] button to return to the

previous mode.

DXZ378RMP/DXZ379RMP

7. IN CASE OF DIFFICULTY

Problem

Cause

Measure

Power does not

turn on.

Fuse is blown.

Replace with a fuse of the same amperage. If the fuse

blows again, consult your store of purchase.

(No sound is

produced.)

Incorrect wiring.

Consult your store of purchase.

No sound output Power antenna lead is

1. Turn the unit off.

when operating

the unit with

amplifiers or

power antenna

attached.

shorted to ground or

2. Remove all wires attached to the power antenna

lead. Check each wire for a possible short to

ground using an ohm meter.

excessive current is required

for remote-on the amplifiers

or power antenna.

3. Turn the unit back on.

4. Reconnect each amplifier remote wire to the power

antenna lead one by one. If the amplifiers turn off

before all wires are attached, use an external relay

to provide remote-on voltage (excessive current

required).

Nothing happens The microprocessor has

Turn off the power, then press

Reset button

when buttons are malfunctioned due to noise, the [OPEN] button and remove

pressed.

etc.

the DCP.

Press the reset button for about

2 seconds with a thin rod.

Display is not

accurate.

DCP or main unit connectors Wipe the dirt off with a soft cloth moistened with

are dirty. cleaning alcohol.

No sound heard

The speaker protection circuit 1. Turn down sound volume. Function can also be

is operating.

restored by turning the power off and on again.

(Speaker volume is reduced automatically when

the speaker protection circuit operates).

2. If the sound is muted again, consult our service

department.

MP3/WMA files are absent in Write MP3/WMA files onto the disc properly.

a disc.

Files are not recognized as

an MP3/WMA file.

Use MP3/WMA files encoded properly.

File system is not correct.

Use ISO9660 level 1, 2 or JOLIET or Romeo file

system.

Sound skips or is Compact disc is dirty.

Clean the compact disc with a soft cloth.

noisy.

Compact disc is heavily

Replace with a compact disc with no scratches.

scratched or warped.

Sound is cut or

skipped.

MP3/WMA files are not

encoded properly.

Use MP3/WMA files encoded properly.

Noise is

generated or

noise is mixed

with sound.

Sound is bad

directly after

power is turned

on.

Water droplets may form on Let dry for about 1 hour with the power on.

the internal lens when the car

is parked in a humid place.

Wrong filename

File system is not correct.

Use ISO9660 level 1, 2 or JOLIET or Romeo file

system.

DXZ378RMP/DXZ379RMP

8. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.

Take the measures described below to eliminate the problem.

Error Display

ERROR 2

Cause

A CD is caught inside the CD This is a failure of CD deck’s mechanism and consult

deck and is not ejected. your store of purchase.

Measure

ERROR 3

ERROR 6

A CD cannot be played due Replace with a non-scratched, non-warped-disc.

to scratches, etc.

A CD is loaded upside-down Eject the disc then reload it properly.

inside the CD deck and does

not play.

ERROR 2

ERROR 3

A CD inside the CD changer This is a failure of CD changer’s mechanism and

is not loaded.

consult your store of purchase.

A CD inside the CD changer Replace with a non-scratched, non-warped disc.

cannot be played due to

scratches, etc.

ERROR 6

A CD inside the CD changer Eject the disc then reload it properly.

cannot be played because it

is loaded upside-down.

ERROR 2

ERROR 3

ERROR 6

A DISC inside the DVD

changer cannot be played.

This is a failure of DVD mechanism and consult your

store of purchase.

A DISC cannot be played due Retry or replace with a non-scratched, non-warped-

to scratches, etc.

disc.

A DISC inside the DVD

changer cannot be played

because it is loaded upside-

down.

Eject the disc then reload it properly.

ERROR P

ERROR R

ERROR 1

Parental level error

Region code error

Set the correct Parental level.

Eject the disc and replace correct region code disc.

Disconnect the iPod, then connect it again.

A communication error

occurs between the iPod and

the iPod CeNET Controller.

NO IPOD

There is no iPod connected. Please connect the iPod.

If an error display other than the ones described above appears, press the reset button. If the problem

persists, turn off the power and consult your store of purchase.

DXZ378RMP/DXZ379RMP

9. SPECIFICATIONS

Radio section

General

Tuning System: PLL synthesizer tuner

Output Power: 4 ✕ 25 W (DIN 45324, +B=14.4V)

Receiving Frequencies:

Power Supply Voltage:

FM : 87.5 to 108 MHz (0.05 MHz steps)

MW : 531 to 1602 kHz (9 kHz steps)

LW : 153 to 279 kHz (3 kHz steps)

14.4 V DC (10.8 to 15.6 V allowable),

negative ground

Power Consumption: Less than 15 A

Speaker Impedance: 4 Ω (4 to 8 Ω allowable)

Weight:

CD player section

System: Compact disc digital audio system

Frequency Response: 5 Hz to 20 kHz ( 1 dB)

Signal to Noise Ratio: 100 dB (1 kHz)

Dynamic Range: 95 dB (1 kHz)

Distortion: 0.01%

Main unit: 1.25 kg

Remote control unit: 40 g (including battery)

Dimensions:

Main unit:

178 (W) ✕ 50 (H) ✕ 155 (D) mm

Remote control unit:

44 (W) ✕ 113 (H) ✕ 11 (D) mm

Note:

• Specifications and design are subject to change without notice for further improvement.

DXZ378RMP/DXZ379RMP

+LJKꢀ7HFKꢁ+LJKꢀ7RXFK

ꢂ'ꢃ0ꢃ ꢄꢅ DJRVWR ꢆꢇꢇꢈꢉ QRꢈꢊꢅꢋ

,Rꢈ )DEEULFDQWH ꢉ 0DQGDWDULR QHOO¶8(

&ODULRQ (XURSD *PE+

+HVVHQULQJ ꢀꢁꢂꢃꢀ

ꢄꢅꢆꢅꢄ 0|UIHOGHQꢂ:DOOGRUI

'LFKLDUR FKH LO SURGRWWR

$XWRUDGLR FRQ &'

';=ꢊꢋꢁ503ꢈ';=ꢊꢋꢌ503

FRQIRUPH DOOH GLVSRVL]LRQL FRQWHQXWH QHO VXGGHWWR

GHFUHWR UHODWLYDPHQWH DOOD SUHYHQ]LRQH H O¶HOHPLQD]LRQH

GHL GLVWXUEL UDGLRHOHWWULFL SURYRFDWL GDL ULFHYLWRUL GL

UDGLRGLIIXVLRQH VRQRUD H WHOHYLVLYDꢇ

,Rꢉ )DEEULFDQWH ꢌ 0DQGDWDULR QHOO¶8(

'DWD

ꢄꢍ 1RYHPEUH ꢄꢍꢍꢎ

&ODULRQ (XURSD *PE+

+HVVHQULQJ ꢀꢁꢂꢃꢀ

ꢄꢅꢆꢅꢄ 0|UIHOGHQꢂ:DOOGRUI

)LUPD

3%/ꢁ1Rꢁꢍꢎ,519ꢍꢍꢆ&

,'&)07):/+ꢍꢍꢄ&

ꢀ

7(/ꢁꢏꢐꢊꢇꢀꢎꢆꢍꢈꢀꢇꢑꢑꢀꢍ

)$;ꢁꢏꢐꢊꢇꢀꢎꢆꢍꢈꢀꢇꢑꢑꢀꢒꢇꢇ

DXZ378RMP/DXZ379RMP

303

ꢀ

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

ꢀ

&(ꢀꢀ '(&/$5$7,21ꢀ ꢀ 2)ꢀ ꢀ &21)250,7<

ꢀ :H &ODULRQ (XURSD *PE+ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢁVXSSOLHUꢂVꢀ QDPHꢃ

^{ꢀ ꢀ ꢀ ꢀ}+HVVHQULQJ ꢁꢂꢃꢄꢁꢅ ꢆꢇꢈꢇꢆ 0|UIHOGHQꢃ:DOOGRUIꢅ *(50$1<ꢀꢀ ꢀ ꢀ ꢀ ꢀ

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢁDGGUHVVꢃ

GHFODUH XQGHU RXU VROH UHVSRQVLELOLW\ WKDW WKH SURGXFWꢀ

&$5 5$',2 ZLWK &' 3/$<(5

ꢀꢀꢀ 02'(/ꢉ';=ꢊꢋꢂ503ꢅ ';=ꢊꢋꢌ503

ꢀꢀꢀꢀꢀ 3URGXFW FRGHꢉ 3(ꢄꢂꢍꢆꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

ꢀꢀꢀꢀꢀ

7<3(ꢉ ꢁꢍꢇꢊꢍꢊꢂꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 02'(/ GLIIHUHQFHꢉ ,//80,1$7,21 &2/25 ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

ꢀꢀꢀꢀꢀꢀ

ꢁQDPHꢄ W\SH RU PRGHOꢄ SRVVLEO\ VRXUFHV DQG QXPEHUV RI LWHPVꢃꢀ

WR ZKLFK WKLV GHFODUDWLRQ UHODWHV LV LQ FRQIRUPLW\ ZLWK WKH IROORZLQJꢀꢀꢀꢀꢀꢀꢀꢀ

ꢀꢀꢀꢀꢀꢀꢀꢀ

VWDQGDUGꢁVꢃ RU RWKHU QRUPDWLYH GRFXPHQWꢁVꢃꢀ

^{ꢀ ꢀ}(1 ꢈꢈꢍꢁꢊꢉꢄꢍꢍꢁ ꢎ $ꢁꢅꢀ ꢀ (1 ꢈꢈꢍꢄꢍꢉꢄꢍꢍꢄ ꢎ $ꢁꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

ꢀꢀꢀꢀꢀꢀ

ꢀꢀꢀꢀꢀꢀꢀ

ꢁWLWOH DQGꢅRU QXPEHU DQG GDWH RI LVVXH RI WKH VWDQGDUGꢁVꢃ RUꢀꢀꢀ

RWKHU QRUPDWLYH GRFXPHQWꢁVꢃꢃꢀ

ꢀ

ꢁLI DSSOLFDEOHꢃ IROORZLQJ WKH SURYLVLRQV RIꢀꢀ ꢌꢂꢏꢊꢊꢆꢏ((& ꢀꢀ 'LUHFWLYHꢆꢀ

ꢀꢀꢀ$QG IROORZLQJ WKH SURYLVLRQV RI ꢄꢍꢍꢇꢏꢁꢍꢇꢏ(& ꢀꢀ 'LUHFWLYHꢄꢀ

DFFRUGLQJꢀWRꢀSDUDJUDSKꢀꢇꢆꢈꢆꢉꢀRI $QQH[ꢀ,ꢄꢀ

PHHWVꢀWKHꢀOLPLWVꢀGHILQHGꢀLQꢀSDUDJUDSKꢀꢊꢆꢋꢄꢀꢊꢆꢊꢄꢀꢊꢆꢌꢀDQGꢀꢊꢆꢉꢀRI $QQH[ꢀ,

ꢀ

ꢀ ꢀ ꢀ ꢀ ꢁVXSSOLHUꢂVꢀ FRPPHQWꢃꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

ꢀ ꢀ ꢀ 0|UIHOGHQꢃ:DOOGRUI *(50$1< ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 6XVXPXꢀ <DPDNDZDꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

ꢀ ꢀ ꢀ ꢀ ꢈꢍ 129 ꢈꢍꢍꢊꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 3UHVLGHQWꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

ꢀꢀꢀ ꢁ3ODFH DQG GDWH RI LVVXHꢃꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ

ꢁQDPH DQGꢀ VLJQDWXUH RU HTXLYDOHQWꢀꢀꢀꢀ

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ PDUNLQJꢀ RIꢀ DXWKRUL]HGꢀ SHUVRQꢃ

ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ

5HI1R ꢍꢊ5&19ꢍꢍꢎꢈꢀꢀꢀꢀꢀ 'ꢀ)ꢀ'4&ꢁꢂ$ꢃꢂꢃ

ꢀ

7(/ꢀꢁꢂꢃꢄꢅꢆꢇꢈꢉꢅꢄꢊꢊꢅꢈ

)$;ꢀꢁꢂꢃꢄꢅꢆꢇꢈꢉꢅꢄꢊꢊꢅꢋꢄꢄ

Clarion Co., Ltd.

Printed in China / Imprimé en Chine / Gedruckt in China / Stampato in Cina

Gedrukt in China / Impreso en China / Tryckt i Kina / Impresso na China

PE-2906E

280-8454-00

2006/12

Blaupunkt HEILBRONN RCC 24 User Manual
Bosch Appliances Boiler 25Si User Manual
Bryan Boilers DST 50 User Manual
Bryan Boilers K550 User Manual
Canon MV 30 User Manual
Hamilton Beach 840072000 User Manual
Hamilton Beach 840164501 User Manual
Honeywell 88013 User Manual
JBL P1042 User Manual
JBL PROCOUSTICS MS 2 User Manual