Owner’s manual
DXZ276MP
DXZ376MP
CD/MP3/WMA RECEIVER WITH CeNET CONTROL
带CeNET控制的CD/MP3/WMA接收器
CD/MP3/WMA 리시버/CeNET 컨트롤
Thank you for purchasing this Clarion product.
∗ Please read this owner’s manual in its entirety before operating this equipment.
∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).
∗ Check the contents of the enclosed warranty card and keep it carefully with this manual.
®
∗ This manual includes the operating procedures of the iPod interface, CD/DVD changer
and TV tuner connected via the CeNET cable. The iPod interface, CD/DVD changer and
TV tuner have their own manuals, but no explanations for operating them are described.
“iPod” is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.
感谢您购买 Clarion 产品。
∗ 在使用本产品之前，请全面阅读本说明书。
∗ 阅读之后，请将本说明书放到便于查阅的地方 （如仪表板的杂物箱中）。
∗ 检查所附保修单上的内容，并与本说明书一同妥善保管。
®
∗ 本说明书包括经由 CeNET 电缆所连接的 iPod 接口、CD/DVD 换盘机和电视调谐器的操作步
骤。 iPod 接口、CD/DVD 换盘机和电视调谐器各有其自己的说明书，但其中没有对它们的操
作进行说明。
“iPod”是苹果计算机公司在美国和其它国家注册的商标。
Clarion 제품을 구입해 주셔서 대단히 감사합니다 .
∗
∗
이 기기를 조작하기 전에 본 사용 설명서를 충분히 읽어 주십시오.
이 사용 설명서를 읽어보신 후에는, 언제든 볼 수 있도록 가까운 곳(예: 글로브 박스)에 보관해
주십시오 .
∗
∗
동봉된 품질 보증서의 내용을 확인하신 후 , 이 사용 설명서와 함께 소중하게 잘 보관해 주십시
오 .
®
이 사용 설명서에는 CeNET 케이블로 연결된 iPod 인터페이스 , CD/DVD 체인저와 TV 튜
너에 관한 조작 절차가 포함되어 있습니다. iPod 인터페이스, CD/DVD 체인저와 TV 튜너는
자체 사용 설명서가 있지만 , 그들의 조작에 관한 설명은 되어 있지 않습니다 .
"iPod" 은 Apple Computer, Inc. 의 상표이며 , 미국과 기타 국가에서 등록되어 있습니다 .
Be sure to unfold and read the next page.
请务必展开并阅读下一页。
반드시 다음 페이지를 펴서 읽으십시오.
DXZ276MP/DXZ376MP
i
CONTROLS / 控制键 / 컨트롤
Source unit /
/
본체
主机
[
]
RELEASE
[
]
[
] ( )
DIRECT 1-3
SCN RPT RDM
SRC
[
], [ ], [
]
[
]
CD SLOT
[ ]
D
(SOUND)
[
]
ROTARY
[
]
AUX
[
]
[
]
BND
ISR
[
]
IR RECEIVER
[
] ( )
DIRECT 4-6
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.
注：在阅读各章时请务必展开此页并参考主视图。
주: 이 페이지를 펼쳐두고, 각 장을 읽을 때 전면 그림을 참조하도록 하십시오.
ii
DXZ276MP/DXZ376MP
Bottom View of Source Unit
主机的仰视图
본체의 저면도
iii
DXZ276MP/DXZ376MP
Contents
CONTROLS............................................................................................................................................ ii
1. FEATURES...................................................................................................................................... 2
2. PRECAUTIONS ............................................................................................................................... 2
Handling Compact Discs.................................................................................................................. 3
3. NOMENCLATURE........................................................................................................................... 4
Names of the Buttons and Their Functions...................................................................................... 4
Display Items.................................................................................................................................... 5
LCD Screen...................................................................................................................................... 5
4. DCP.................................................................................................................................................. 6
5. REMOTE CONTROL ....................................................................................................................... 7
Inserting the Battery ......................................................................................................................... 7
Functions of Remote Control Unit Buttons....................................................................................... 8
6. OPERATIONS................................................................................................................................ 10
Basic Operations............................................................................................................................ 10
Radio Operations ........................................................................................................................... 13
CD/MP3/WMA Operations ............................................................................................................. 15
Operations Common to Each Mode............................................................................................... 19
7. OPERATIONS OF ACCESSORIES .............................................................................................. 22
iPod BB Operations........................................................................................................................ 22
CD Changer Operations................................................................................................................. 24
DVD Changer Operations .............................................................................................................. 25
TV Operations ................................................................................................................................ 26
8. IN CASE OF DIFFICULTY............................................................................................................. 27
9. ERROR DISPLAYS ....................................................................................................................... 28
10. SPECIFICATIONS ......................................................................................................................... 29
DXZ276MP/DXZ376MP
1
1. FEATURES
• MP3/WMA compatible with ID3-TAG display
• Build-in High-pass filter & Low-pass filter (DXZ376MP)
• “Z-ENHANCER” sound customisation & “MAGNA BASS EX” dynamic bass enhancement
(DXZ276MP)
• High visibility single line display
2. PRECAUTIONS
1. When the inside of the car is very cold and
CAUTION
the player is used soon after switching on the
heater moisture may form on the disc or the
optical parts of the player and proper
playback may not be possible. If moisture
forms on the disc, wipe it off with a soft cloth.
If moisture forms on the optical parts of the
player, do not use the player for about one
hour. The condensation will disappear
naturally allowing normal operation.
USE OF CONTROLS, ADJUSTMENTS, OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN, MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE.
THE COMPACT DISC PLAYER SHOULD NOT
BE ADJUSTED OR REPAIRED BY ANYONE
EXCEPT PROPERLY QUALIFIED SERVICE
PERSONNEL.
2. Driving on extremely bumpy roads which
cause severe vibration may cause the sound
to skip.
CHANGES OR MODIFICATIONS NOT
EXPRESSLY APPROVED BY THE
MANUFACTURER FOR COMPLIANCE
COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
3. This unit uses a precision mechanism. Even
in the event that trouble arises, never open
the case, disassemble the unit, or lubricate
the rotating parts.
INFORMATION FOR USERS:
CHANGES OR MODIFICATIONS TO THIS
PRODUCT NOT APPROVED BY THE
MANUFACTURER WILL VOID THE
WARRANTY.
2
DXZ276MP/DXZ376MP
Handling Compact Discs
Use only compact discs bearing the
or
Storage
• Do not expose compact discs to direct
sunlight or any heat source.
mark.
Do not play heart-shaped, octagonal, or other
specially shaped compact discs.
• Do not expose compact discs to excess
humidity or dust.
Some CDs recorded in CD-R/CD-RW mode
may not be usable.
• Do not expose compact discs to direct heat
from heaters.
Handling
Cleaning
• Compared to ordinary music CDs, CD-R and
CD-RW discs are both easily affected by high
temperature and humidity and some of CD-R
and CD-RW discs may not be played.
Therefore, do not leave them for a long time
in the car.
• To remove fingermarks and dust, use a soft
cloth and wipe in a straight line from the
center of the compact disc to the
circumference.
• Do not use any solvents, such as
commercially available cleaners, anti-static
spray, or thinner to clean compact discs.
• New discs may
Ball-point pen
have some
• After using special compact disc cleaner, let
the compact disc dry off well before playing it.
roughness
Roughness
around the
edges. If such
discs are used,
the player may
not work or the
sound may
skip. Use a ball-point pen or the like to
remove any roughness from the edge of the
disc.
• Never stick labels on the surface of the
compact disc or mark the surface with a
pencil or pen.
• Never play a compact disc with any
cellophane tape or other glue on it or with
peeling off marks. If you try to play such a
compact disc, you may not be able to get it
back out of the CD player or it may damage
the CD player.
• Do not use compact discs that have large
scratches, are misshapen, cracked, etc. Use
of such discs may cause misoperation or
damage.
• To remove a compact disc from its storage
case, press down on the center of the case
and lift the disc out, holding it carefully by the
edges.
• Do not use commercially available CD
protection sheets or discs equipped with
stabilizers, etc. These may damage the disc
or cause breakdown of the internal
mechanism.
DXZ276MP/DXZ376MP
3
3. NOMENCLATURE
Note:
• Be sure to read this chapter referring to the front diagrams of chapter “CONTROLS” on page ii (unfold).
Names of the Buttons and Their Functions
[RELEASE] button
• Deeply push in the button to unlock the DCP.
[IR RECEIVER]
• Receiver for remote control unit. (Operating
range: 30° in all directions)
[DIRECT] buttons
• Store a station into memory or recall it directly
[ROTARY] knob
while in the radio mode.
• Adjust the volume by turning the knob
clockwise or counterclockwise.
[SCN] button
• Perform scan play for 10 seconds of each
[BND] button
track while in the CD/MP3/WMA mode.
• Switch the band, or seek tuning or manual
tuning while in the radio mode.
• Press and hold the button for 1 second or
longer to perform folder scan play while in the
MP3/WMA mode.
• Play a first track while in the CD/MP3/WMA
mode.
• Press the button to change the character.
[RPT] button
• Perform repeat play while in the CD/MP3/
WMA mode.
[x], [v] buttons
• Select a station while in the radio mode or
select a track while in the CD/MP3/WMA
mode.
• Press and hold the button for 1 second or
longer to perform folder repeat play while in
the MP3/WMA mode.
This button is used to make various settings.
[RDM] button
• Perform random play while in the CD/MP3/
WMA mode.
• Press and hold the button for 1 second or
longer to enter the fast-forward or fast-
backward mode.
• Press and hold the button for 1 second or
longer to perform folder random play while in
the MP3/WMA mode.
[w] (UP), [z] (DN) buttons
• Select the folder while in the MP3/WMA
mode.
[SRC] button
• Use the buttons to perform various settings.
• Press the button to turn on the power.
[ISR] button
• Recall ISR radio station in memory.
• Press and hold the button for 1 second or
longer to turn off the power.
• Press and hold the button for 2 seconds or
longer: Store current station into ISR memory
(radio mode only).
• Switch the operation mode among the radio
mode, etc.
[
] button
[
] (SOUND) button
• Perform preset scan while in the radio mode.
When the button is pressed and held, auto
store is performed.
• Use the button to switch to the sound adjust
mode.
• Press and hold the button for 1 second or
longer to turn on or off the MAGNA BASS
EXTEND mode.
• Play or pause a track while in the CD/MP3/
WMA mode.
• Confirm various settings.
[D] button
• Switch the display indication.
[CD SLOT]
• CD insertion slot.
• Press and hold the button for 1 second or
longer to enter the adjust mode.
[AUX] input jack
• The input jack for connecting an external
device.
[Q] (EJECT) button
• Press to eject a disc loaded in the unit.
4
DXZ276MP/DXZ376MP
Display Items
Operation status indication
Frequency, Titles, Clock, etc. are displayed
: MP3 indication
: Z-enhancer indication
: WMA indication
: Disc number indication
: MAGNA BASS EX indication
: MUTE indication
: Preset channel indication (1 to 6)
: Stereo indication
: Enter indication
: Manual indication
: Disc or Folder random/
repeat/scan indication
: Random indication
: Repeat indication
: Scan indication
LCD Screen
In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.
The screen will recover when it returns to normal temperature.
DXZ276MP/DXZ376MP
5
4. DCP
Removing the DCP
1. Press the [SRC] button for 1 second or
CAUTION
• The DCP can easily be damaged by
shocks. After removing it, be careful not to
drop it or subject it to strong shocks.
longer to switch off the power.
2. Press in the [RELEASE] button.
[
]
RELEASE button
• The connector connecting the main unit
and the DCP is an extremely important
part. Be careful not to damage it by
pressing on it with fingernails, pens,
screwdrivers, etc.
DCP Rear Panel
Main Unit Front
∗ The DCP is unlocked
DCP
connector
3. Remove the DCP.
Main unit connector
Note:
• If the DCP is dirty, wipe off the dirt with a soft, dry
cloth only.
• The DCP case is provided with the DXZ376MP
(PE2907K-A/B).
DCP
Attaching the DCP
1. Insert the right side of the DCP into the main
unit.
2. Insert the left side of the DCP into the main
unit.
2.
DCP
1.
6
DXZ276MP/DXZ376MP
5. REMOTE CONTROL
Inserting the Battery
1Turn over the remote control unit and slide
the cover in the direction indicated by the
arrow in the illustration.
2Insert the battery (CR2025) into the insertion
guides, with the printed side (+) facing
upwards.
3Press the battery in the direction indicated by
the arrow so that it slides into the
compartment.
4Replace the cover and slide in until it clicks
Insertion guide
into place.
Notes:
Misuse may result in rupture of the battery,
producing leakage of fluid and resulting in personal
injury or damage to surrounding materials. Always
follow these safety precautions:
R
• Use only the designated battery.
• When replacing the battery, insert properly, with
+/– polarities oriented correctly.
• Do not subject battery to heat, or dispose of in fire
or water. Do not attempt to disassemble the
battery.
• Dispose of used batteries properly.
DXZ276MP/DXZ376MP
7
Functions of Remote Control Unit Buttons
∗ Some buttons on the remote control unit have different functions from the corresponding buttons on the main
unit.
Signal transmitter
[
]
[
]
SRC
BND
[
]
]
[
]
MUTE
DISP
[
ISR
[
[
]
RDM
]
RPT
[
]
SCN
● Shared modes
● Radio mode
[SRC] button
• Press the button to turn on the power.
[BND] button
• Switches reception band.
Press and hold the button for 1 second or
longer to turn off the power.
[x], [v] buttons
• Moves preset channels up and down.
• Use to alternate operation mode among the
various modes.
[SCN] button
• Press to perform preset scan.
[w], [z] buttons
• Press and hold the button for 2 seconds or
longer to perform auto store.
• Increases and decreases volume.
[MUTE] button
• Turns mute function on and off.
● CD/MP3/WMA modes
[ISR] button
• Recalls ISR radio station stored in memory.
[BND] button
• Press to play the first track.
• Press and hold the button for 2 seconds or
longer to store current station in ISR memory
(radio mode only).
[x], [v] buttons
• Press to move the tracks up and down.
• Press and hold the button for 1 second or
longer to perform fast-forward/fast-backward.
[DISP] button
• Press to alternate between main display, title
display and clock time display.
[
] button
• Switches between playback and pause.
[SCN] button
• Press to perform scan play.
• When in MP3/WMA mode, press and hold the
button for 1 second or longer to perform folder
scan play.
8
DXZ276MP/DXZ376MP
Functions of Remote Control Unit Buttons
[RPT] button
• Press to perform repeat play.
● iPod BB mode
[x], [v] buttons
• When in MP3/WMA mode, press and hold the
button for 1 second or longer to perform folder
repeat play.
• Press to move the tracks up and down.
• Press and hold the button for 1 second or
longer to perform fast-forward/fast-backward.
[RDM] button
• Press to perform random play.
[
] button
• Switches between playback and pause.
• When in MP3/WMA mode, press and hold the
button for 1 second or longer to perform folder
random play.
[RPT] button
• Press to perform repeat play.
• Press and hold the button for 1 second or
longer to perform all repeat play.
● CD changer/DVD changer modes
[BND] button
• Press to switch to next disc in ascending
order.
[RDM] button
• Press to perform random play.
• Press and hold the button for 1 second or
longer to perform all random play.
[x], [v] buttons
• Press to move the tracks up and down.
● TV mode
[BND] button
• Switches reception band.
• Press and hold the button for 1 second or
longer to perform fast-forward/fast-backward.
[
] button
[x], [v] buttons
• Switches between playback and pause.
• Moves preset channels up and down.
[SCN] button
• Press to perform scan play.
[SCN] button
• Press to perform preset scan.
• Press and hold the button for 1 second or
longer to perform disc scan play.
• Press and hold the button for 2 seconds or
longer to perform auto store.
[RPT] button
• Press to perform repeat play.
[RDM] button
• Press to alternate between TV and VTR.
• Press and hold the button for 1 second or
longer to perform disc repeat play.
[RDM] button
• Press to perform random play.
• Press and hold the button for 1 second or
longer to perform disc random play.
DXZ276MP/DXZ376MP
9
6. OPERATIONS
Note:
• Be sure to read this chapter referring to the front diagrams of chapter “CONTROLS” on page ii (unfold).
Basic Operations
Selecting a mode
1. Press the [SRC] button to change the
CAUTION
Be sure to lower the volume before
operation mode.
switching off the unit power or the ignition
2. Each time you press the [SRC] button, the
key. The unit remembers its last volume
operation mode changes in the following
setting. If you switch the power off with the
order:
volume up, when you switch the power back
on, the sudden loud volume may hurt your
hearing and damage the unit.
Radio ➜ CD/MP3/WMA ➜ (iPod BB) ➜ (CD
changer) ➜ (DVD changer) ➜ (TV) ➜ AUX
➜ Radio...
∗ External equipment not connected with
CeNET is not displayed.
Turning on/off the power
Note:
• Be careful about using this unit for a long time
without running the engine. If you drain the car’s
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
Adjusting the volume
1. Turning the [ROTARY] knob clockwise
increases the volume; turning it
counterclockwise decreases the volume.
1. Press the [SRC] button.
∗ The volume level is from 0 (minimum) to 33
(maximum).
2. Press and hold the [SRC] button for 1
second or longer to turn off the power for the
unit.
Switching the display
Press the [D] button to select the desired
Note:
• System check
display.
The first time this unit is turned on after the wire
connections are completed, it must be checked
what equipment is connected. When the power is
turned on, the “S-CHECK” appears in the display,
then the unit returns to the clock display mode.
The system check starts within the unit. When the
system check is complete, press the [SRC] button
again.
∗ If the button operation is performed with the
screen saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
For details, refer to the subsection “Turning the
screen saver function on or off” in section
“Operations Common to Each Mode”.
10
DXZ276MP/DXZ376MP
Basic Operations
When “EXCITE” is set:
Sound Adjustment
You can adjust a sound effect or tone quality to
your preference.
3-2. Press the [
] button.
3-3. Press the [w] or [z] button to adjust the
bass and treble in the range of +3 to –3.
To change sound setting
∗ The factory default setting is “0”.
3-4. Press the [ ] button to return to previous
mode.
1. Press the [
] button to switch to the
sound adjustment selection display.
∗ The factory default sound setting is “Z-
EHCR”.
When “IMPACT” is set:
3-2. Press the [ ] button.
3-3. Press the [w] or [z] button to adjust the
2. Then press the [x] or [v] button to
bass and treble in the range of +3 to –3.
select the sound adjustment mode.
∗ The factory default setting is “0”.
3-4. Press the [ ] button to return to previous
mode.
Each time you press the [x] or [v]
button, the sound adjustment mode
changes as following order:
“Z-EHCR” ↔ “BASS” ↔ “TREBLE” ↔
“BALANCE” ↔ “FADER” ↔ “REAR/S-W”
↔ “S-W VOL” ↔ “HPF”
When “B-BOOST” is set:
3-2. Press the [
] button.
3-3. Press the [w] or [z] button to adjust the
The sound adjust mode will be display for
2 seconds before showing the sound
setting.
bass in the range of +3 to –3.
∗ The factory default setting is “0”.
3-4. Press the [ ] button to return to previous
mode.
3. Press the [w] or [z] button to adjust the
selected audio mode.
● Adjusting the bass
This adjustment can be performed only when
the Z-Enhancer is set to “OFF”.
∗ In the case of display blinking “ENT”, you
can press the [
setting value.
] button to adjust the
2-1. Select “BASS”.
4. After completing settings, press the [
button to return to the previous mode.
]
3-1. Press the [w] or [z] button to adjust the
bass.
∗ The factory default setting is “0”.
● Setting the Z-Enhancer
This unit are provided with 3 types of sound
tone effects stored in memory.
(Adjustment range: +8 to –8)
● Adjusting the treble
This adjustment can be performed only when
the Z-Enhancer is set to “OFF”.
Select the one you prefer.
∗ The factory default setting is “OFF”.
2-1. Select “Z-EHCR”.
2-1. Select “TREBLE”.
3-1. Press the [w] or [z] button to adjust the
3-1. Each time you press the [w] or [z] button,
the tone effect changes in the following
order:
treble.
∗ The factory default setting is “0”.
(Adjustment range: +7 to –7)
“EXCITE” ↔ “IMPACT” ↔ “B-BOOST” ↔
“OFF”
● Adjusting the balance
2-1. Select “BALANCE”.
EXCITE : bass and treble emphasized
3-1. Press the [w] or [z] button to adjust the
mid deemphasized
balance of the right and left speakers.
IMPACT : bass and treble emphasized
∗ The factory default setting is “CENTER”
(center). (Adjustment range: RIGHT12 to
LEFT12 (right 12 to left 12))
B-BOOST : bass emphasized
OFF
: no sound effect
DXZ276MP/DXZ376MP
11
Basic Operations
● Adjusting the fader
2-1. Select “FADER”.
● Setting the MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust
the low frequencies like the normal sound
adjustment function, but emphasizes the deep
bass frequencies to provide you with a dynamic
sound.
3-1. Press the [w] or [z] button to adjust the
balance of the rear and front speakers.
∗ The factory default setting is “CENTER”
(center). (Adjustment range: FRONT12 to
REAR12 (front 12 to rear 12))
∗ The factory default setting is “OFF” (off).
1. Press and hold the [
] button for 1 second
● Setting the subwoofer
(DXZ376MP only)
You can set the low pass filter of subwoofer.
or longer to turn on the MAGNA BASS
EXTEND effect. “M-B EX” lights in the
display.
2-1. Select “REAR/S-W”.
2. Press and hold the [
] button for 1 second
3-1. Each time you press the [w] or [z] button
to select the setting, the setting changes in
the following order:
or longer to turn off the MAGNA BASS
EXTEND effect. “M-B EX” goes off.
Note:
• During SOUND adjustment mode, if no operation
is performed for more than 10 seconds, this mode
can be cancelled and return to previous mode.
“LPF 120” ↔ “LPF 80” ↔ “LPF 50” ↔
“REAR”
∗ The factory default setting is “REAR” (rear).
● Adjusting the subwoofer output
volume (DXZ376MP only)
You can adjust the volume output from the unit’s
subwoofer output terminal.
This adjustment can be performed only when
the “REAR/S-W” is set to “LPF 120”, “LPF 80”
or “LPF 50”.
2-1. Select “S-W VOL”.
3-1. Press the [w] or [z] button to increases
or decreases the subwoofer volume.
∗ The factory default setting is “0”.
(Adjustment range: +6 to –6)
∗ When the volume level is more than 30, the
subwoofer volume adjustment value can not
reach +6.
● Adjusting the high pass filter
(DXZ376MP only)
2-1. Select “HPF”.
3-1. Each time you press the [w] or [z] button
to select the setting.
The setting changes in the following order:
“120Hz” ↔ “THROUGH”
∗ The factory default setting is “THROUGH”
(through).
12
DXZ276MP/DXZ376MP
Radio Operations
● Quick tuning
Listening to the radio
Press and hold the [x] or [v] button for 1
second or longer to tune in a station.
1. Press the [SRC] button and select the radio
mode. The frequency appears in the display.
● Step tuning
2. Press the [BND] button and select the radio
band. Each time the button is pressed, the
radio reception band changes in the
following order:
Press the [x] or [v] button to manually tune
in a station.
F1 (FM1) ➜ F2 (FM2) ➜ F3 (FM3) ➜ AM ➜
F1 (FM1)...
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio
stations in memory. Pressing the corresponding
[DIRECT] button or the [w] / [z] button recalls
the stored radio frequency automatically.
3. Press the [x] or [v] button to tune in the
desired station.
Tuning
1. Press the [BND] button and select the
There are 3 types of tuning mode available,
seek tuning, manual tuning and preset tuning.
desired band (FM or AM).
2. Press the corresponding [DIRECT] button or
the [w] / [z] button to recall the stored
station.
Seek tuning
1. Press the [BND] button and select the
Note:
desired band (FM or AM).
• Press and hold one of the [DIRECT] buttons for 2
seconds or longer to store that station into preset
memory.
∗ If “MANU” is lit in the display, press and hold
the [BND] button for 1 second or longer.
“MANU” in the display goes off and seek
tuning is now available.
Manual memory
1. Select the desired station with seek tuning or
2. Press the [x] or [v] button to
automatically seek a station.
manual tuning.
When the [v] button is pressed, the station
is sought in the direction of higher
frequencies; if the [x] button is pressed,
the station is sought in the direction of lower
frequencies.
2. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
Auto store
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
Auto store is a function for storing up to 6
stations that are automatically tuned in
sequentially. If 6 receivable stations cannot be
received, a previously stored station remains
unoverwritten at the memory position.
When you are in the step tuning mode, the
frequency changes one step at a time. In the
quick tuning mode, you can quickly tune the
desired frequency.
1. Press the [BND] button and select the
desired band (FM or AM).
2. Press and hold the [
] button for 2 seconds
1. Press the [BND] button and select the
or longer. The stations with good reception
are stored automatically to the preset
channels.
desired band (FM or AM).
∗ If “MANU” is not lit in the display, press and
hold the [BND] button for 1 second or longer.
“MANU” is lit in the display and manual tuning
is now available.
2. Tune into a station.
DXZ276MP/DXZ376MP
13
Radio Operations
Preset scan
Instant station recall (ISR)
Preset scan receives the stations stored in
preset memory in order. This function is useful
when searching for a desired station in memory.
Instant station recall is a special radio preset
that instantly accesses a favorite radio station at
a touch of a button. The ISR function even
operates with the unit in other modes.
1. Press the [
2. When a desired station is tuned in, press the
] button again to continue receiving that
station.
Note:
• Be careful not to press and hold the [
] button.
● ISR memory
1. Select the station that you wish to store in
ISR memory.
[
2. Press and hold the [ISR] button for 2
seconds or longer.
] button
for 2 seconds or longer, otherwise the auto store
function is engaged and the unit starts storing
stations.
● Recalling a station with ISR
In any mode, press the [ISR] button to turn on
the radio function and tune the selected radio
station. “ISR” appears in the display. Press the
[ISR] button again to return to the previous
mode.
14
DXZ276MP/DXZ376MP
CD/MP3/WMA Operations
Precautions when creating MP3/
WMA disc
● Usable sampling rates and bit rates
1. MP3: Sampling rate 8 kHz-48 kHz,
Bit rate: 8 kbps-320 kbps / VBR
2. WMA: Bit rate 48 kbps-192 kbps
MP3/WMA
What is MP3?
MP3 is an audio compression method and
classified into audio layer 3 of MPEG standards.
This audio compression method has penetrated
into PC users and become a standard format.
● File extensions
This MP3 features the original audio data
compression to about 10 percent of its initial
size with a high sound quality. This means that
about 10 music CDs can be recorded on a CD-
R disc or CD-RW disc to allow a long listening
time without having to change CDs.
1. Always add a file extension “.MP3” or
“.WMA” to MP3 or WMA file by using single
byte letters. If you add a file extension other
than specified or forget to add the file
extension, the file cannot be played.
2. Files without MP3/WMA data will not play.
The indication “– –:– –” appears in the play
time display if you attempt to play files
without MP3/WMA data.
What is WMA?
WMA is the abbreviation of Windows Media
Audio, an audio file format developed by
Microsoft Corporation.
● Logical format (File system)
1. When writing MP3/WMA file on a CD-R disc
or CD-RW disc, please select “ISO9660 level
1, 2 or JOLIET or Romeo” as the writing
software format. Normal play may not be
possible if the disc is recorded on another
format.
Notes:
• If you play a file with DRM (Digital Rights
Management) for WMA remaining ON, no audio
is output (The WMA indicator blinks).
• Windows Media™, and the Windows ® logo are
trademarks, or registered trademarks of Microsoft
Corporation in the United States and/or other
countries.
2. The folder name and file name can be
displayed as the title during MP3/WMA play
but the title must be within 64 single byte
alphabetical letters and numerals (including
an extension).
● To disable DRM (Digital Rights
Management)
1. When using Windows Media Player 8, click
on TOOLS ➜ OPTIONS ➜ COPY MUSIC
tab, then under COPY SETTINGS, unclick
the check box for PROTECT CONTENT.
Then, reconstruct files.
3. Do not affix a name to a file inside a folder
having the same name.
● Folder structure
1. A disc with a folder having more than 8
hierarchical levels will be impossible.
2. When using Windows Media Player 9, click
on TOOL ➜ OPTIONS ➜ MUSIC RECORD
tab, then under Recording settings, unclick
the Check box for RECORD PROTECTED
MUSIC. Then, reconstruct files.
● Number of files or folders
1. Up to 255 files can be recognized per folder.
Up to 510 files can be played.
2. Tracks are played in the order that they were
recorded onto a disc. (Tracks might not
always be played in the order displayed on
the PC.)
Personally constructed WMA files are used
at your own responsibility.
3. Some noise may occur depending on the
type of encoder software used while
recording.
DXZ276MP/DXZ376MP
15
CD/MP3/WMA Operations
Set the type of file to be played
(multi-session function)
When a single disc holds both normal CD type
tracks and MP3/WMA type tracks, use this
command to select which type of track to play.
Ejecting a CD
1. Press the [Q] to eject the CD. Take it out
from the ejected position. “EJECT” appears
in the display.
Notes:
• If a CD (12 cm) is left in the ejected position for 15
seconds, the CD is automatically reloaded. (Auto
reload)
• If you force a CD into before auto reloading, this
can damage the CD.
∗ Default setting is “M-SESS CD”.
• When only one type of track (either music CD
or MP3/WMA) is recorded on a disc, selecting
either type will allow playback of the disc.
• When playing CCCD (copy-control CDs), set
to CD type.
Listening to a disc already loaded
in the unit
Press the [SRC] button to select the CD/MP3/
WMA mode.
1. Press and hold the [BND] button for 1
second or longer.
Each time the button is held pressed in this
way “M-SESS” will be displayed for 1
second, then “CD” or “MP3” appears in the
display, the playback type alternates
between CD type and MP3/WMA type.
When the unit enters the CD/MP3/WMA mode,
play starts automatically.
If there is no disc loaded, the indication “NO
DISC” appears in the display.
• M-SESS CD
When playing music CD only.
• M-SESS MP3
When playing music MP3/WMA only.
The mode changes each time the [SRC] button
is pressed. (Modes are not displayed for
equipment that is not connected.)
Radio ➜ CD/MP3/WMA ➜ (iPod BB) ➜ (CD
changer) ➜ (DVD changer) ➜ (TV) ➜ AUX ➜
Radio ...
2. When setting is completed, remove the disc
and reinsert it.
Disc-In-Play function
Loading a CD
As long as the ignition key is turned to the ON or
ACC position, this function allows you to turn the
power to the unit and start playing the disc
automatically when the disc is inserted even if
the power is not turned on.
1. Insert a CD into the centre of the CD SLOT
with the labeled side facing up. “LOADING”
appears in the display, the CD enters into the
slot, and the play starts.
Notes:
CAUTION
• Do not try to put your hand or fingers in
the disc insertion slot. Also never insert
foreign objects into the slot.
• Never insert foreign objects into the CD SLOT.
• If the CD is not inserted easily, there may be
another CD in the mechanism or the unit may
require service.
• Discs not bearing the
or
mark and
• Do not insert discs where adhesive comes
out from cellophane tape or a rental CD
label, or discs with marks where
cellophane tape or rental CD labels were
removed. It may be impossible to extract
these discs from the unit and they may
cause the unit to break down.
CD-ROMs cannot be played by this unit.
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
16
DXZ276MP/DXZ376MP
CD/MP3/WMA Operations
Pausing play
Fast-forward/fast-backward
1. Press the [
] button to pause play.
● Fast-forward
1. Press and hold the [v] button for 1 second
“PAUSE” appears in the display.
or longer.
2. To resume CD play, press the [
again.
] button
● Fast-backward
1. Press and hold the [x] button for 1 second
or longer.
∗ For MP3/WMA discs, it takes some time until the
start of searching and between tracks. In addition,
the playing time may have a margin of error.
Displaying CD titles
This unit can display title data for CD-text/MP3/
WMA disc and user titles input with this unit.
1. Each time you press the [D] button to change
the title display.
Folder Select
This function allows you to select a folder
containing MP3/WMA files and start playing
from the first track in the folder.
● CD-TEXT disc
User ➜ Track ➜ Disc ➜ Artist ➜ User ...
● MP3/WMA disc
Track ➜ Folder ➜ Title ➜ Album ➜ Artist ➜
Track ...
Notes:
• If the CD playing is not a CD-text CD or no user
title has been input, “NO TITLE” appears in the
display.
1. Press the [z] or [w] button.
Press the [w] button to move the next
folder. Press the [z] button to move the
previous folder.
2. To select a track, press the [x] or [v]
button.
• If MP3/WMA disc is not input TAG, “NO TAG”
appears in the display.
Top function
The top function resets the CD player to the first
track of the disc. Press the [BND] button to play
the first track (track No. 1) on the disc.
∗ In case of MP3/WMA, the first track of a folder
being played will be returned.
• For MP3, supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0.
• Tag displays give priority to V2.3 / 2.2.
• In the case of album Tags for WMA, the
information written into the extension header is
displayed.
• Only ASCII characters can be displayed in Tags.
Selecting a track
● Track-up
1. Press the [v] button to move ahead to the
beginning of the next track.
2. Each time you press the [v] button, the
track advances ahead to the beginning of the
next track.
● Track-down
1. Press the [x] button to move back to the
beginning of the current track.
2. Press the [x] button twice to move back to
the beginning of the previous track.
DXZ276MP/DXZ376MP
17
CD/MP3/WMA Operations
● Folder repeat play
Other various play functions
This function allows you to play a track currently
being played in the MP3/WMA folder
repeatedly.
● Scan play
This function allows you to locate and play the
first 10 seconds of all the tracks recorded on a
disc.
1. Press and hold the [RPT] button for 1 second
or longer to perform folder repeat play.
1. Press the [SCN] button to perform scan play.
“ALL RPT” appears in the display.
“TRK SCN” appears in the display.
∗ Scan play starts from the next track after the
track currently being played.
● Random play
This function allows you to play all tracks
recorded on a disc in a random order.
● Folder scan play
1. Press the [RDM] button to perform random
This function allows you to locate and play the
first 10 seconds of the first track of all the folders
on an MP3/WMA disc.
play.
“TRK RDM” appears in the display.
1. Press and hold the [SCN] button for 1
● Folder random play
second or longer to perform folder scan play.
This function allows you to play all the tracks of
all the folders recorded on an MP3/WMA disc in
a random order.
“ALL SCN” appears in the display.
∗ Folder scan play starts from the next folder
after the folder currently being played.
1. Press and hold the [RDM] button for 1
second or longer to perform folder random
play.
● Repeat play
This function allows you to play the current track
“ALL RDM” appears in the display.
repeatedly.
1. Press the [RPT] button to perform repeat
● To cancel play
1. Press the operating button previously
play.
selected.
“TRK RPT” appears in the display.
18
DXZ276MP/DXZ376MP
Operations Common to Each Mode
● Turning the screen saver function on
or off
To change adjustment setting
This unit is provided with the screen saver
function which allows you to show various kinds
of patterns and characters in the operation
status indication area of the display in a random
order. You can turn on or off this function. If the
button operation is performed with the screen
saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
1. Press and hold the [D] button for 1 second
or longer to switch to the adjustment
selection display.
2. Press the [x] or [v] button to select
the “item name”.
“CLOCK” ↔ “SCRN SVR” ↔ “MSG INP”
↔ “SCROLL” ↔ “DIMMER” ↔ “A-
CANCEL” ↔ “TEL-SP” ↔ “TEL-SW” ↔
“S-CHECK”
∗ The adjustment item name will be display
for 2 seconds before showing the desired
value.
∗ The factory default setting is “ON”.
2-1. Select “SCRN SVR”.
3-1. Press the [w] or [z] button to select the
3. Press the [w] or [z] button to select the
setting.
“desired setting value”.
Each time you press the [w] or [z] button,
∗ In the case of display blinking “ENT”, you
the setting changes in the following order:
can press the [
setting value.
] button to adjust the
“MESSAGE” ↔ “ON” ↔ “OFF”
∗ After completing settings, press the [D]
● Entering message information
Message up to 30 characters long can be stored
in memory and displayed as a type of screen
saver setting.
∗ The factory default setting is “WELCOME TO
CLARION”.
button to return to the previous mode.
● Setting the clock
2-1. Select “CLOCK”.
3-1. Press the [
] button.
2-1. Select “MSG INP”.
3-2. Press the [x] or [v] button to select
3-1. Press the [ ] button.
the hour or the minute.
3-2. Press and hold the [BND] button for 1
3-3. Press the [w] or [z] button to set the
second or longer to clear the old message.
correct time.
3-3. Press the [x] or [v] button to move the
∗ The clock is displayed in 12-hour format.
cursor.
3-4. Press the [
memory.
] button to store the time into
3-4. Press the [BND] button to select a
character type. Each time you press the
[BND] button, the character type changes
in the following orders:
Note:
• You cannot set the clock when it is displayed with
only the ignition on. If you drain or remove the
car’s battery or take out this unit, the clock is
reset. While setting the clock, if another button or
operation is selected, the clock set mode is
canceled.
Capital letters ➜ Numbers ➜ Symbols ➜
Capital letters…
3-5. Press the [w] or [z] button to select the
desired character.
3-6. Repeat step 3-3 to 3-5 to enter up to 30
characters for message.
3-7. Press and hold the [
] button for 2
seconds or longer to store the message in
memory.
∗ Press and hold the [BND] button for 1
second or longer to cancel the input
message. Then press and hold the [
]
button for 2 seconds or longer to store the
message and the message return to default
setting.
DXZ276MP/DXZ376MP
19
Operations Common to Each Mode
● Setting the method for title scroll
Set how to scroll in CD-TEXT, MP3/WMA title.
∗ The factory default setting is “ON”.
2-1. Select “SCROLL”.
● Cellular phone interrupt setting
If you connect this unit and your cellular phone
with a separately sold cable, you can listen to
your telephone calls on your car speakers.
∗ The factory default setting is “OFF”.
3-1. Press the [w] or [z] button to select “ON”
When the AUX input jack is used to connect an
AUX BLUETOOTH BB (BLT370) (sold
separately):
or “OFF”.
• ON:
To scroll automatically.
• OFF:
To scroll just 1 time.
2-1. Select “TEL-SW”.
3-1. Press the [w] or [z] button to select the
setting. Each time you press the [w] or
[z] button, the setting changes in the
following order:
● Setting the dimmer control
You can set the dimmer control “ON” or “OFF”.
∗ The factory default setting is “ON”.
2-1. Select “DIMMER”.
“OFF” ↔ “ON” ↔ “MUTE”
• OFF:
3-1. Press the [w] or [z] button to select “ON”
This unit continues normal operation even
when the cellular phone is used.
or “OFF”.
● Setting the external amplifier
∗ The factory default setting is “OFF”.
2-1. Select “A-CANCEL”.
• ON:
You can listen to your telephone calls from
the speakers connected to this unit.
3-1. Press the [w] or [z] button to select “ON”
∗ When listening to your calls on your car
speakers, you can adjust the volume by
turning the [ROTARY] knob.
or “OFF”.
• ON:
• MUTE:
Use with connected AMP.
• OFF:
Use with inside AMP.
The sound from this unit is muted during
telephone calls.
Note:
● Setting the car speaker output for the
cellular phone
∗ The factory default setting is “LEFT”.
• If connecting a hands-free kit, please ensure the
setting is ON to receive the telephone audio
through the system.
∗ To output the telephone calls, set the cellular
phone interrupt to “ON”.
● Performing a system check
This function allows you to perform a system
When the AUX input jack is used to connect an
AUX BLUETOOTH BB (BLT370) (sold
separately):
check from the adjust mode when required.
2-1. Select “S-CHECK”.
3-1. Press and hold the [
second or longer.
] button for 1
2-1. Select “TEL-SP”.
3-1. Press the [w] or [z] button to select
“S-CHECK” appears in the display, then
the unit returns to the previous operation
mode.
“RIGHT” or “LEFT”.
• RIGHT:
Telephone calls can be heard on the front
right speaker connected to this unit.
• LEFT:
Telephone calls can be heard on the front
left speaker connected to this unit.
20
DXZ276MP/DXZ376MP
Operations Common to Each Mode
Entering titles
Clearing titles
Titles up to 8 characters long can be stored in
memory and displayed for CD, CD changer,
Radio stations and TV stations. The number of
titles that can be entered for each mode are as
follows.
1. Select and play a CD in the CD changer or
tune in to a TV station or Radio for which you
want to clear the title.
2. Press and hold the [D] button for 1 second or
longer to switch to the adjustment selection
display.
Mode
Number of titles
50 titles
3. Press the [x] or [v] button to select
CD mode
TV mode
Radio mode
“TITLE IN”.
20 titles
4. Press the [ ] button.
30 titles
The display switches to the title input display.
CD changer mode
Number of titles
5. Press and hold the [BND] button for 1
second or longer.
DCZ625 connected
100 titles
All characters in the title disappear.
1. Press the [SRC] button to select the mode
you want to enter a title (Radio, CD, CD
changer or TV).
6. Press and hold the [
] button for 2 seconds
or longer to store the setting.
2. Select and play a CD in the CD changer or
tune in to a TV station or Radio for which you
want to enter the title.
AUX function
This system has an external input jack on the
front panel so you can listen to sounds and
music from external devices connected to this
unit.
3. Press and hold the [D] button for 1 second or
longer to switch to the adjustment selection
display.
● Selecting AUX IN sensitivity
Make the following settings to select the
sensitivity when sounds from external devices
connected to this unit are difficult to hear even
after adjusting the volume.
∗ The factory default setting is “MID”.
1. Press and hold the [D] button for 1 second or
4. Press the [x] or [v] button to select
“TITLE IN”.
5. Press the [
] button.
The display switches to the title input display.
6. Press the [x] or [v] button to move the
cursor.
7. Press the [BND] button to select a character
type. Each time you press the [BND] button,
the character type changes in the following
order:
longer.
2. Select “AUX SENS”.
3. Press the [w] or [z] button to select
“LOW”, “MID” or “HIGH”.
Capital letters ➜ Numbers ➜ Symbols ➜
Capital letters…
8. Press the [w] or [z] button to select the
desired character.
9. Repeat steps 6 to 8 to enter up to 8
characters for the title.
10.Press and hold the [
] button for 2 seconds
or longer to store the title into memory.
DXZ276MP/DXZ376MP
21
7. OPERATIONS OF ACCESSORIES
iPod BB Operations
● iPod BB
Other various play functions
(in Play mode)
This section describes operations when
connected to a CeNET iPod Interface (EA-
1276). (Hereinafter, “iPod Interface (EA-1276)”
is abbreviated as iPod BB.)
Notes:
• These functions are not supported when in the
iPod menu mode.
• The Random function set on the iPod or when
connected to iPod BB, remains the same after
attachment/ detachment of the iPod.
• The iPod BB can be set simultaneously for All
repeat and All random. The display will appear as
follows:
Note:
• See the iPod BB Owner’s Manual for details
regarding iPod BB connections and operation
conditions.
Connecting an iPod
When an iPod is connected to the iPod BB
interface, the “Repeat” set on the iPod will
become “All repeat play” instead. Likewise,
“Shuffle” set on the iPod will become as follows:
(Function)
All random
+
Random
+
All repeat
All repeat
• “Shuffle (Albums)” play ➜ Random play
(Display)
• “Shuffle (Songs)” play ➜ All random play
The iPod BB interface has two modes, the “Play
mode” and the “iPod menu mode” for selecting
tracks. Switch between these modes by
pressing the [BND] button.
● Repeat play
Play back one track repeatedly.
1. Press the [RPT] button.
Select iPod BB Interface
1. Press the [SRC] button.
● All repeat play
Repeatedly play all tracks within a selected
Playback will begin from the last file that was
played on the iPod alone or through the iPod
BB.
category.
1. Press and hold the [RPT] button for 1 second
or longer.
Note:
● Random play
• The following operations in Play mode operate
the same as in CD mode:
Play all albums within a selected category, in
random order. (Corresponds to “Shuffle
(Albums)” command on iPod.)
∗Track selection: [x], [v]
∗Fast-forward/fast-backward: [x], [v]
1. Press the [RDM] button.
∗Pause: [
]
● All random play
See “CD/MP3/WMA Operations” (page 15-18)
for details.
Play all tracks within a selected category, in
random order. (Corresponds to “Shuffle
(Songs)” command on iPod.)
1. Press and hold the [RDM] button for 1
second or longer.
● To cancel play
1. Press the same play button once again.
Note:
• When the all repeat play mode is canceled,
playback will stop when all tracks have been
played.
22
DXZ276MP/DXZ376MP
iPod BB Operations
Selecting category from the iPod
menu
Selecting category using preset
memory
1. Press the [BND] button to select the iPod
1. Press the [BND] button to select the iPod
menu mode.
menu mode.
The iPod menu categories will be displayed.
The category can be set as follows in the
[DIRECT] (1-6) buttons.
Note:
[1] : PLAYLIST
[2] : ARTIST
[3] : ALBUM
[4] : SONG
• Repeat and Random mode operations are not
supported when in the iPod menu mode.
2. Press the [w] or [z] button to switch
between categories.
The iPod menu categories alternate in the
following order:
[5] : GENRE
[6] : COMPOSER
“PLAYLIST” ↔ “COMPOSER” ↔ “GENRE”
↔ “SONG” ↔ “ALBUM” ↔ “ARTIST” ↔ ...
Note:
The iPod menu mode can be canceled by
performing one of the following operations:
• Press the [BND] button.
• When the category select screen is displayed,
press the [v] button.
2. Press the desired [DIRECT] (1-6) button to
select the category.
∗ Subfolders may be displayed, depending on
the category.
In this case, use the [w] and [z] buttons to
switch between subfolders, then use the [v]
button to select the desired subfolder.
3. When the track name display is showing,
3. Press the [v] button to select the category.
4. When the track name display is showing,
press the [v] button.
Playback will begin from the first track in the
selected category, and the iPod menu mode
will be canceled.
press the [v] button.
Playback will begin from the first track in the
selected category, and the iPod menu mode
will be canceled.
∗ Use the [w] and [z] buttons to select a track
within a category.
∗ Subfolders may be displayed, depending on
the category.
About title display
This unit supports the display of title information
transmitted from a connected iPod.
In this case, use the [w] and [z] buttons to
switch between subfolders, then use the [v]
button to select the desired subfolder.
• Character code information is UTF-8;
displayable characters include English
alphanumerics, some symbols, and some
umlaut characters.
∗ When the track name display is showing,
pressing the [x] button will return to the
currently playing folder name display.
5. Use the [w] and [z] buttons to select a
track within a category.
• Unsupported characters will be replaced by
asterisks (*).
DXZ276MP/DXZ376MP
23
CD Changer Operations
Note:
Procedure to scroll a title
Set “SCROLL” to “ON” or “OFF”.
• The following operations are the same as for CD
mode:
∗Pause
∗Track selection
∗Fast-forward/fast-backward
∗Scan play
∗Repeat play
∗Random play
See “CD/MP3/WMA Operations” (page 15-18)
for details.
(The factory default setting is “ON”. Refer to the
subsection “Setting the method for title scroll”
in section “Operations Common to Each
Mode”.)
● When set to “ON”
The title is automatically kept scrolling.
● When set to “OFF”
To scroll just 1 time.
Selecting a CD
CD changer functions
1. Press the [w] or [z] button to select the
When an optional CD changer is connected
through the CeNET cable, this unit controls all
CD changer functions. This unit can control a
total of 2 changers.
desired disc.
∗ If a CD is not loaded in a slot of magazine,
pressing the [w] or [z] button can not work.
Press the [SRC] button and select the CD
changer mode to start play. If 2 CD changers
are connected, press the [SRC] button to select
the CD changer for play.
∗ If “NO MAG” appears in the display, insert the
magazine into the CD changer. “D-CHECK”
appears in the display while the player loads
(checks) the magazine.
Other various play functions
● Disc scan play
Disc scan play locates and plays the first 10
seconds of the first track on each disc in the
currently selected CD changer. This function
continues automatically until it is cancelled.
∗ Disc scan play is useful when you want to select a
desired CD.
∗ If “NO DISC” appears in the display, eject the
magazine and insert discs into each slot. Then,
reinsert the magazine back into the CD changer.
1. Press and hold the [SCN] button for 1
second or longer. “ALL SCN” appears in the
display and disc scan play starts.
Note:
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
● Disc repeat play
After all the tracks on the current disc have been
played, disc repeat play automatically replays
the current disc over from the first track. This
function continues automatically until it is
cancelled.
CAUTION
CD-ROM discs cannot be played from every
CD changer, it’s depended on the model.
1. Press and hold the [RPT] button for 1 second
or longer. “ALL RPT” appears in the display
and disc repeat play starts.
Displaying CD titles
This unit can display title data for CD-text CDs
and user titles input with this unit.
∗ Title data for CD-text CDs can be displayed with
this unit only when it is connected to DCZ625.
● Disc random play
The disc random play selects and plays
individual tracks or discs automatically in no
particular order. This function continues
automatically until it is cancelled.
1. Press the [D] button to change the title
display.
Notes:
• If the CD playing is not a CD-text CD or no user
title has been input, “NO TITLE” appears in the
display.
1. Press and hold the [RDM] button for 1
second or longer. “ALL RDM” appears in the
display and disc random play starts.
● To cancel play
1. Press the operating button previously
• If a CD-text CD is not input its disc title or a track
title, “NO TITLE” appears in the display.
selected.
24
DXZ276MP/DXZ376MP
DVD Changer Operations
Note:
By connecting an optional DVD changer that
supports CeNET wiring, this unit can be used to
control the DVD changer. To view DVDs, an
optional monitor is required.
• The following operations are the same as for CD
and CD Changer modes:
∗Pause
∗Track selection
∗Fast-forward/fast-backward
∗Scan play
∗Repeat play
∗Random play
See “CD/MP3/WMA Operations” (page 15-18)
and “CD Changer Operations” (page 24) for
details.
• The DVD control and display functions
supported by this unit are limited; the unit
does not support all the functions possible on
a DVD changer.
For fullest functionality, use the remote
control unit provided with your DVD changer
to control its operations. For details, consult
the Owner’s Manual provided with your DVD
changer.
DXZ276MP/DXZ376MP
25
TV Operations
Note:
Setting the TV Area
When you select the TV area (TV reception
area) TV tuner area setting changes.
• The following operations are performed the same
as for radio mode:
∗Channel selection
∗Storing channels in memory
∗Calling channels from memory
∗Auto store
1. Press and hold the [D] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [x] or [v] button to select “TV
∗Preset scan
See “Radio Operations” (page 13-14) for details.
AREA”.
3. Press the [w] or [z] button to select the
reception area.
TV tuner functions
4. Press the [D] button to return to the previous
When an optional TV tuner is connected
through the CeNET cable, this unit controls all
TV tuner functions. To watch TV requires a TV
tuner and monitor.
mode.
Setting the TV diver
You can change the reception setting for the TV
antenna connected to the TV tuner.
∗ The factory default setting is “ON”.
1. Press and hold the [D] button for 1 second or
longer to switch to the adjustment selection
display.
Watching a TV
1. Press the [SRC] button and select the TV
mode.
2. Press the [BND] button to select the desired
TV band (TV1 or TV2). Each time the button
is pressed, the input selection toggles
between TV1 and TV2.
2. Press the [x] or [v] button to select “TV
DIVER”.
3. Press the [w] or [z] button to set to “ON” or
3. Press the [x] or [v] button to tune in the
“OFF”.
desired TV station.
• ON:
Sets the diver setting to ON.
• OFF:
Sets the diver setting to OFF.
Watching a video
The TV tuner has a VTR input terminal to which
1 external device can be connected. Connect a
12 V video cassette player (VCP) or video
cassette recorder (VCR) to the TV tuner input
terminal.
4. Press the [D] button to return to the previous
mode.
∗ The factory default setting is “TV”.
1. Press and hold the [D] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [x] or [v] button to select “TV/
VTR”.
3. Press and hold the [
] button for 1 second
or longer to set to “VTR”.
4. To return to the TV broadcast, press and
hold the [D] button for 1 second or longer to
switch to the adjustment selection display.
5. Press the [x] or [v] button to select “TV/
VTR”.
6. Press and hold the [
] button for 1 second
or longer to set to “TV”.
26
DXZ276MP/DXZ376MP
8. IN CASE OF DIFFICULTY
Problem
Cause
Measure
Power does not
turn on.
Fuse is blown.
Replace with a fuse of the same amperage. If the fuse
blows again, consult your store of purchase.
(No sound is
produced.)
Incorrect wiring.
Consult your store of purchase.
No sound output Power antenna lead is
1. Turn the unit off.
when operating
the unit with
amplifiers or
power antenna
attached.
shorted to ground or
2. Remove all wires attached to the power antenna
lead. Check each wire for a possible short to
ground using an ohm meter.
excessive current is required
for remote-on the amplifiers
or power antenna.
3. Turn the unit back on.
4. Reconnect each amplifier remote wire to the power
antenna lead one by one. If the amplifiers turn off
before all wires are attached, use an external relay
to provide remote-on voltage (excessive current
required).
Nothing happens The microprocessor has
Turn off the power, then press
Reset button
when buttons are malfunctioned due to noise, the [RELEASE] button and
pressed.
etc.
remove the DCP.
Press the reset button for about
2 seconds with a thin rod.
Display is not
accurate.
DCP or main unit connectors Wipe the dirt off with a soft cloth moistened with
are dirty. cleaning alcohol.
No sound heard
No sound heard
The speaker protection circuit 1. Turn down sound volume. Function can also be
is operating.
restored by turning the power off and on again.
(Speaker volume is reduced automatically when
the speaker protection circuit operates).
2. If the sound is muted again, consult our service
department.
MP3/WMA files are absent in Write MP3/WMA files onto the disc properly.
a disc.
Files are not recognized as
an MP3/WMA file.
Use MP3/WMA files encoded properly.
File system is not correct.
Use ISO9660 level 1, 2 or JOLIET or Romeo file
system.
Sound skips or is Compact disc is dirty.
Clean the compact disc with a soft cloth.
noisy.
Compact disc is heavily
Replace with a compact disc with no scratches.
scratched or warped.
Sound is cut or
skipped.
MP3/WMA files are not
encoded properly.
Use MP3/WMA files encoded properly.
Noise is
generated or
noise is mixed
with sound.
Sound is bad
directly after
power is turned
on.
Water droplets may form on Let dry for about 1 hour with the power on.
the internal lens when the car
is parked in a humid place.
Wrong filename
File system is not correct.
Use ISO9660 level 1, 2 or JOLIET or Romeo file
system.
DXZ276MP/DXZ376MP
27
9. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
Error Display
ERROR 2
Cause
A CD is caught inside the CD This is a failure of CD deck’s mechanism and consult
deck and is not ejected. your store of purchase.
Measure
ERROR 3
ERROR 6
A CD cannot be played due Replace with a non-scratched, non-warped-disc.
to scratches, etc.
A CD is loaded upside-down Eject the disc then reload it properly.
inside the CD deck and does
not play.
ERROR 2
ERROR 3
A CD inside the CD changer This is a failure of CD changer’s mechanism and
is not loaded.
consult your store of purchase.
A CD inside the CD changer Replace with a non-scratched, non-warped disc.
cannot be played due to
scratches, etc.
ERROR 6
A CD inside the CD changer Eject the disc then reload it properly.
cannot be played because it
is loaded upside-down.
ERROR 2
ERROR 3
ERROR 6
A DISC inside the DVD
changer cannot be played.
This is a failure of DVD mechanism and consult your
store of purchase.
A DISC cannot be played due Retry or replace with a non-scratched, non-warped-
to scratches, etc.
disc.
A DISC inside the DVD
changer cannot be played
because it is loaded upside-
down.
Eject the disc then reload it properly.
ERROR P
ERROR R
ERROR 1
Parental level error
Region code error
Set the correct Parental level.
Eject the disc and replace correct region code disc.
Disconnect the iPod, then connect it again.
A communication error
occurs between the iPod and
the iPod CeNET Controller.
NO IPOD
There is no iPod connected. Please connect the iPod.
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your store of purchase.
28
DXZ276MP/DXZ376MP
10. SPECIFICATIONS
FM Tuner
General
Frequency Range: 87.0 MHz to 108.0 MHz
Power Supply Voltage:
Usable Sensitivity: 9 dBf
14.4 V DC (10.8 to 15.6 V allowable), negative
ground
50dB Quieting Sensitivity: 15 dBf
Alternate Channel Selectivity: 70 dB
Stereo Separation (1 kHz): 35 dB
Frequency Response ( 3 dB): 30 Hz to 15 kHz
Current Consumption: Less than 15 A
Speaker Impedance: 4 Ω (4 Ω to 8 Ω allowable)
Auto Antenna Rated Current: 500 mA or less
Weight / Source unit: 1.14 kg
Weight / Remote Control Unit:
AM Tuner
Frequency Range: 531 kHz to 1629 kHz
40 g (including battery)
Dimensions / Source unit:
Usable Sensitivity: 25 µV
178 (W) ✕ 50 (H) ✕ 155 (D) mm
Dimensions / Remote Control Unit:
44 (W) ✕ 113(H) ✕ 11 (D) mm
CD Player
System: Compact disc digital audio system
Usable Discs: Compact disc
Frequency Response ( 1 dB): 5 Hz to 20 kHz
Signal to noise Ratio (1 kHz): 100 dB
Dynamic Range (1 kHz): 95 dB
Harmonic Distortion: 0.01%
Audio
Maximum Power Output: 200 W (50 W ✕ 4 ch)
Continuous Average power Output:
20 W ✕ 4, into 4 Ω, 20 kHz, 1% THD
Bass Control Action (100 Hz): +14 dB, –14 dB
Treble Control Action (10 kHz): +14 dB, –14 dB
Line Output Level (CD 1 kHz):
DXZ376MP: 3.6 V
DXZ276MP: 1.8 V
Note:
• Specifications and design are subject to change without notice for further improvement.
DXZ276MP/DXZ376MP
29
30
DXZ276MP/DXZ376MP
Clarion Co., Ltd.
PE-2908K-A/B
PE-2907K-A/B
280-8489-00
All Rights Reserved. Copyright © 2006: Clarion Co., Ltd.
2006/12
|