Clarion Car Stereo System CZ101EG User Manual

Contents  
Thank you for purchasing this Clarion product.  
• Please fully read this owner’s manual before operating this equipment.  
• Check the contents of the enclosed warranty card and store it in a safe place with this manual.  
1. FEATURES ........................................................................................................................ 3  
2. PRECAUTIONS ................................................................................................................. 4  
Front Panel / Generalities.................................................................................................. 4  
Remove the DCP .............................................................................................................. 5  
Attach the DCP.................................................................................................................. 5  
Storing the DCP in the DCP Case..................................................................................... 5  
3. CONTROLS ....................................................................................................................... 6  
Operational Panel.............................................................................................................. 6  
Names of Buttons.............................................................................................................. 6  
4. CAUTIONS ON HANDLING .............................................................................................. 7  
Handling Discs .................................................................................................................. 7  
5. OPERATIONS.................................................................................................................... 8  
Basic Operations............................................................................................................... 8  
System Setup.................................................................................................................... 9  
Audio Setup....................................................................................................................... 9  
Radio Operations ............................................................................................................ 10  
Radio Data System Operations....................................................................................... 11  
CD/MP3/WMA Operations .............................................................................................. 12  
AUX Operations .............................................................................................................. 14  
6. TROUBLE SHOOTING.................................................................................................... 15  
7. ERROR DISPLAYS.......................................................................................................... 16  
8. SPECIFICATIONS ........................................................................................................... 17  
9. INSTALLATION / WIRE CONNECTION GUIDE ............................................................. 18  
2
1. FEATURES  
MP3/WMA compatible with ID3-TAG display  
Front-panel auxiliary input & 2ch RCA output  
"BEAT-EQ" with 3 Band Parametric Equalizer & "MAGNA BASS EX" dynamic bass  
enhancement  
Expanding Systems  
Expanding audio features  
2 Channel Amplifier  
Portable Player  
(Connect by AUX IN Jack)  
Note:  
The items listed outside of the frames are  
the commercial products generally sold.  
3
2. PRECAUTIONS  
WARNING  
For your safety, the driver should not operate the controls while driving.  
Also, while driving, keep the volume to a level at which external sounds can be heard.  
1. When the inside of the car is very  
Front Panel / Generalities  
cold and the player is used soon after  
switching on the heater, moisture may  
form on the disc or the optical parts of the  
player and proper playback may not be  
possible. If moisture forms on the disc,  
wipe it off with a soft cloth. If moisture  
forms on the optical parts of the player,  
do not use the player for about one hour.  
The condensation will disappear naturally  
allowing normal operation.  
For a longer service life, be sure to read the  
following cautions.  
Do not allow any liquids on the set from  
drinks, umbrellas, etc. Doing so may  
damage the internal circuitry.  
Do not disassemble or modify the set in  
any way. Doing so may result in damage.  
Do not let cigarettes burn the display.  
Doing so may damage or deform the  
body.  
2. Driving on extremely bumpy roads which  
cause severe vibration may cause the  
sound to skip.  
If a problem should occur, have the set  
inspected at your store of purchase.  
3. This unit uses a precision mechanism.  
Even in the event that trouble arises,  
never open the case, disassemble the  
unit, or lubricate the rotating parts.  
Cleaning the body  
Use a soft, dry cloth and gently wipe off  
the dirt.  
For tough dirt, apply some neutral  
detergent diluted in water to a soft cloth,  
wipe off the dirt gently, then wipe again  
with a dry cloth.  
Do not use benzene, thinner, car cleaner,  
etc., as these substances may damage  
the body or cause the paint to peel. Also,  
leaving rubber or plastic products in  
contact with the body for long periods of  
time may cause stains.  
4
Remove the DCP  
The control panel can be detached to prevent  
theft. When detaching the control panel, store  
it in the DCP (DETACHABLE CONTROL  
PANEL) case to prevent scratches.  
We recommend taking the DCP with you  
when leaving the car.  
1. Press the [SRC / ] button (1 sec.) to turn  
off the power.  
2. Deeply push in [OPEN] button to unlock  
the DCP.  
3. Hold the side popped out, remove the  
DCP.  
Attach the DCP  
1. Hold the DCP and ensure that the panel  
faces towards you. Set the right side of the  
DCP into the DCP bracket.  
2. Press the left side of the DCP until it locks.  
Storing the DCP in the DCP Case  
Hold the DCP, as shown in the figure below,  
and put it into the supplied DCP case.  
CAUTION  
The DCP can easily be damaged by  
shocks. After removing it, be carefully not  
to drop it or subject it to strong shocks.  
Once the [OPEN] button is pressed and  
DCP is unlocked, car vibrations can cause  
the DCP to fall  
DCP  
The connector for the main unit and  
DCP is extremely important. Be careful  
not to damage it by pressing on it with  
fingernails, screwdrivers, etc.  
DCP case  
Note:  
If the DCP is dirty, wipe off the dirt with a soft,  
dry cloth only.  
5
3. CONTROLS  
Operational Panel  
[MENU] [PS/AS]  
Disc Slot  
[
]
E
TA  
[
,
]
[OPEN]  
[BAND]  
[VOLUME]  
[SOUND]  
[1~6]  
AUX Jack  
[D]  
[TA]  
[SRC/  
]
Names of Buttons  
[SRC / ] Button  
[VOLUME] Knob  
• Power / Toggle the audio source  
• Adjust volume level / Confirm (press)  
[BAND] Button  
[TA] Button  
• Select tuner band  
• Traffic announcement  
[MENU] Button  
[1~6] Buttons  
MP3/WMA mode – Search function.  
CD mode – No function.  
RADIO mode – PTY select  
AUX mode – No function.  
• [1] Button: Scan play / Preset station 1.  
• [2] Button: Repeat play / Preset station 2.  
• [3] Button: Random play / Preset station 3.  
• [4] Button: Play / Pause / Top play (long  
press) / Preset station 4.  
[
] Button  
• [5] Button: Previous folder / Preset station 5.  
10 tracks down (long press)  
• Press to eject disc.  
• [6] Button: Next folder / Preset station 6.  
10 tracks up (long press)  
[
,
] Buttons  
• Previous / next track  
• Search (Long press)  
[D] Button  
• Display switch  
[Open] Button  
• System setup (long press)  
• Unlock the front panel.  
[PS / AS] Button  
• Scan play / Preset scan  
• Auto memory store (long press)  
[SOUND] Button  
• Sound effect setting  
6
4. CAUTIONS ON HANDLING  
Handling Discs  
Handling  
Storage  
New discs may have some roughness  
around the edges. If such discs are used,  
the player may not work or the sound may  
skip. Use a ball-point pen or the like to  
remove any roughness from the edge of  
the disc.  
Do not expose discs to direct sunlight or  
any heat source.  
Do not expose discs to excess humidity or  
dust.  
Do not expose discs to direct heat from  
heaters.  
Cleaning  
Ball-point pen  
Roughness  
To remove fingermarks and dust, use a soft  
cloth and wipe in a straight line from the  
center of the disc to the circumference.  
Do not use any solvents, such as  
commercially available cleaners, anti-static  
spray, or thinner to clean discs.  
After using special disc cleaner, let the disc  
dry off well before playing it.  
On Discs  
Never stick labels on the surface of the disc  
or mark the surface with a pencil or pen.  
Never play a disc with any cellophane tape  
or other glue on it or with peeling off marks.  
If you try to play such a disc, you may not  
be able to get it back out of the player or it  
may damage the player.  
Do not use discs that have large  
scratches, are misshapen, cracked, etc.  
Use of such discs may cause  
Never turn off the power and remove the  
unit from the car with a disc loaded.  
CAUTION  
For your safety, the driver should not insert  
or eject a disc while driving.  
misoperation or damage.  
To remove a disc from its storage case,  
press down on the center of the case and  
lift the disc out, holding it carefully by the  
edges.  
Do not use commercially available disc  
protection sheets or discs equipped with  
stabilizers, etc. These may damage the  
disc or cause breakdown of the internal  
mechanism.  
7
5. OPERATIONS  
Basic Operations  
Note:  
Volume adjustment  
• Refer to the diagrams in “3. CONTROLS”  
when reading this chapter.  
Turn the [VOLUME] knob on the front panel.  
The adjustable range of volume is 0 to 40.  
CAUTION  
CAUTION  
When the unit is turned on, starting and  
stopping the engine with its volume  
raised to the maximum level may harm  
your hearings.  
While driving, keep the volume level at  
which external sounds can be heard.  
Be careful about adjusting the volume.  
Playing source selection  
Press [SRC / ] button on the front panel  
repeatedly to choose desired playing source.  
Power on / off  
Notes:  
Start the engine before using this unit.  
Be careful about using this unit for a long  
time without running the engine. If you  
drain the car’s battery too far, you may not  
be able to start the engine and this can  
reduce the service life of the battery.  
Notes:  
Playing source selection means selecting  
work mode, such as DISC mode, RADIO  
mode and AUX mode.  
Display system time  
1. Start the engine. The power button / knob  
illumination on the unit will light up.  
Press the [D] button on the front panel to  
switch the display information between RDS  
information, system time and playing source.  
Engine ON  
position  
RESET  
Note:  
2. Press the [SRC / ] button on the front  
panel to turn on the power under standby  
mode. The unit goes back to the last  
status after power on.  
*
When the [RESET] button is pressed,  
frequencies of radio stations, titles, etc.  
stored in memory are cleared.  
3. Press and hold the [SRC / ] button on  
the front panel to turn off the power.  
CT (Clock Time) display  
• The displayed clock data is based on the  
CT (clock time) data in the RDS signal.  
RESET  
8
System Setup  
At all mode, press and hold [D] button to  
When SCROLL is OFF, the LCD will display  
one of the ID3 TAG information, the default  
is TRACK, but user can adjust it to other ID3  
TAG information by press [BAND] button.  
enter system setup. Press [  
,
] buttons  
to select options, rotate the [VOLUME] knob  
to adjust.  
AF: ON/OFF  
DIMMER: ON/OFF  
Rotate the [VOLUME] knob to choose AF ON  
or OFF.  
Rotate the [VOLUME] knob to choose  
DIMMER ON or OFF.  
ON: LCD dimmer is active when small light  
of vehicle is turned ON.  
OFF: LCD always maximum brightness  
REG: ON/OFF  
Rotate the [VOLUME] knob to choose REG  
ON or OFF.  
regardless of the vehicle small light.  
DX/LO (RADIO mode)  
REAR/S-W  
Rotate the [VOLUME] knob to choose radio  
local or distant at RADIO mode.  
Rotate the [VOLUME] knob to choose REAR  
or S-WOOFER (SUB-WOOFER).  
LO: Only stations with strong signal can  
be received.  
DX: Stations with strong and weak signals  
TEL-SW  
Rotate the [VOLUME] knob to choose MUTE,  
can be received.  
ON or OFF.  
MUTE:  
AUX SENS (AUX mode)  
The sound from this unit is muted during  
telephone calls.  
Rotate the [VOLUME] knob to choose AUX  
Input sensitivity LOW, MID or HIGH at AUX  
mode.  
OFF:  
This unit continues normal operation even  
when the cellular phone is used.  
SCRN SVR: ON/OFF  
ON:  
Rotate the [VOLUME] knob to choose SCRN  
SVR (screen saver) ON or OFF.  
You can listen to your telephone calls from  
the speakers connected to this unit.  
*When listening to your calls on your car  
speakers, you can adjust the volume by  
turning the [VOLUME] knob.  
SCROLL: ON/OFF  
For track information that is longer than the  
display panel:  
When SCROLL is ON, the LCD will display  
ID3 TAG information cyclely, e.g: TRACK-  
>FOLDER->FILE->ALBUM->TITLE-  
>ARTIST->TRACK->...  
BEEP: ON/OFF  
Rotate the [VOLUME] knob to choose button  
beep sound ON or OFF.  
Audio Setup  
Press the [SOUND] button to enter sound  
effect setting mode. First press shows current  
EQ. Rotate the [VOLUME] knob to changes  
BEAT EQ in this order:  
it including: BAS-G -> BAS-F -> BAS-Q  
-> MID-G -> MID-F -> MID-Q -> TRE-G ->  
TRE-F, rotate the [VOLUME] knob to select a  
value.  
OFF -> B-BOOST -> IMPACT -> EXCITE ->  
CUSTOM  
BAS-G / MID-G / TRE-G: (-7)- (+7)  
BAS-F: 60 / 80 / 100 / 200  
BAS-Q: 1.0 / 1.25 / 1.5 / 2.0  
Rotate the [VOLUME] knob to changes  
CUSTOM, and press the [VOLUME] knob,  
MID-F: 500 / 1K / 1.5K / 2.5K  
MID-Q: 0.5 / 0.75 / 1.00 / 1.25  
TRE-F: 10.0K / 12.5K / 15.0K / 17.5K  
the press [  
] or [  
] button to select  
9
Audio Setup  
Press the [SOUND] button, then press [  
,
BALANCE:LEFT 1-7->CENTER->RIGHT 1-7  
FADER:FRONT 1-7->CENTER->REAR 1-7  
M-BEX: ON/OFF  
LPF: THROUGH/80/120/160  
SUBW VOL: (-6)-(+6)  
] buttons to select USER preset including:  
BALANCE -> FADER -> M-B EX -> LPF(low  
pass filter) -> S-W VOL (Subwoofer Volume),  
rotate the [VOLUME] knob to select a value.  
Radio Operations  
Select tuner as playing source  
Auto store  
Press [SRC / ] button once or more to  
enter RADIO mode.  
Only stations with sufficient signal strength  
will be detected and stored in the memory.  
Press and hold the [PS/AS] button (1 sec.) to  
start automatic station search.  
To stop auto store, press other buttons  
having radio functions.  
Select one radio band  
Press the [BAND] button on the panel to  
select one radio band among FM1, FM2,  
FM3, MW and LW.  
Notes:  
1. After auto store, the previous stored  
stations will be overwritten.  
Manual tuning  
During manual tuning, the frequency will be  
changed in steps.  
2. The unit has 5 bands, such as FM1,  
FM2, FM3, MW, LW. FM3 and MW, LW  
can store by AS function. Each bands  
can store 6 stations, CZ101E/CZ101ER/  
CZ101EG can store 30 stations in total.  
Press the [  
] / [  
] buttons on the  
panel to tune in a higher / lower station.  
Auto tuning  
Manual store  
Press and hold the [  
] / [  
] buttons  
on the panel to seek a higher / lower station.  
To stop searching, repeat the operation  
above or press other buttons having radio  
functions.  
When one expected radio station has been  
detected, press and hold number button 1-6  
to store it in the memory.  
Note:  
Recall the stored stations  
When a station is received, searching stops  
and the station is played.  
Press one numeric button among 1 to 6 on  
the panel to select the corresponding stored  
station.  
Preset scan  
Preset scan receives the stations stored  
in preset memory in order. This function is  
useful when searching for a desired station in  
memory.  
Local seeking  
When LOCAL seeking is on, only those radio  
stations with strong radio signal could be  
received.  
To open or close LOCAL function, press and  
hold the [D] button on the front panel, then  
1. Press the [PS/AS] button.  
2. When a desired station is tuned in, press  
the [PS/AS] button again to continue  
receiving that station.  
press [  
] button repeatedly until LO or  
DX displays on the screen, and rotate the  
[VOLUME] knob to select Local or Distant  
mode.  
Note:  
Be careful not to press and hold the  
[PS/AS] button for 1 second or longer,  
otherwise the auto store function will begin  
and the unit starts storing stations.  
Note:  
The number of radio stations that can be  
received will decrease after the local seeking  
mode is on.  
10  
Radio Data System Operations  
Radio Data System  
Note:  
This function can be used when a regional  
broadcast of the same network is received.  
This unit has a built-in “Radio Data System”  
decoder system that supports broadcast  
stations transmitting “Radio Data System”  
data.  
When using the “Radio Data System”  
function, always set the radio to FM mode.  
TA (Traffic Announcement)  
In the TA standby mode, when a traffic  
announcement broadcast starts, the traffic  
announcement broadcast is received as top  
priority regardless of the function mode so  
you can listen to it. Traffic programme (TP)  
automatic tuning is also available.  
AF function  
The AF function switches to a different  
frequency on the same network in order to  
maintain optimum reception.  
* The factory default setting is ON.  
1. Set to system setup by long pressing [D]  
button.  
*
This function can only be used when  
TP” appears in the display. When “TP”  
appears, this means that the “Radio Data  
System” broadcast station being received  
has traffic announcement programmes.  
2. Press the [  
] or [  
] button to select  
AF”.  
Setting the TA standby mode  
3. Rotate the [VOLUME] knob to select ON  
or OFF.  
• AF ON:  
AF” indicator appears in the display and  
AF function turns on.  
If you press the [TA] button, “TA” lights in  
the display and the unit is set into the TA  
standby mode until a traffic announcement  
is broadcast. When a traffic announcement  
broadcast starts, “TRAF INF” appears in the  
display. If you press the [TA] button while  
a traffic announcement broadcast is being  
received, the traffic announcement broadcast  
reception is cancelled and the unit goes into  
the TA standby mode.  
• AF OFF:  
AF” indicator disappears in the display  
and AF function turns off.  
REG (Regional programme)  
function  
When the REG function is ON, the optimum  
regional station can be received. When this  
function is OFF, if the regional station area  
switches as you drive, a regional station for  
that region is received.  
Cancelling the TA standby mode  
As “TA” lits in the display, press the [TA]  
button. The “TA” in the display goes off and  
the TA standby mode is cancelled.  
* The factory default setting is ON.  
PTY (Programme Type)  
Notes:  
This function enables you to listen to a  
broadcast of the selected programme type  
even if the unit is on a function mode other  
than radio.  
This function is disabled when a national  
station such as BBC R2 is being received.  
The REG function ON/OFF setting is valid  
when the AF function is ON.  
*
Some countries do not yet have PTY  
broadcast.  
1. Set to system setup by long pressing [D]  
button.  
*
In the TA standby mode, a TP station has  
priority over a PTY broadcast station.  
2. Press the [  
] or [  
] button to select  
REG”.  
3. Rotate the [VOLUME] knob to select ON  
or OFF.  
Selecting PTY  
Press [MENU] button, then rotate the  
[VOLUME] knob to select PTY type,  
press the [VOLUME] knob, the unit begin  
searching.  
Manually tuning a regional station  
in the same network  
This function is valid when the AF function is  
ON and the REG function is OFF.  
11  
CD/MP3/WMA Operations  
byte alphabetical letters and numerals  
(including an extension).  
3. Do not affix a name to a file inside a folder  
having the same name.  
This unit can play back MP3/WMA  
files  
Notes:  
• If you play a WMA file with active DRM  
(Digital Rights Management), no audio is  
output.  
Folder structure  
A disc with a folder having more than 8  
hierarchical levels will be impossible.  
To disable DRM  
(Digital Rights Management)  
Number of files or folders  
1. Up to 999 files can be recognized per  
folder.  
Up to 999 files can be played.  
2. Tracks are played in the order that they  
were recorded onto a disc. (Tracks  
may not always be played in the order  
displayed on the PC.)  
When using Windows Media Player 9/10/11,  
click on Tool -> Options -> Copy music tab,  
then under Copy settings, unclick the Check  
box for Copy protect music. Then, reconstruct  
files.  
Personally constructed WMA files are used  
at your own responsibility.  
3. Some noise may occur depending on  
the type of encoder software used while  
recording.  
Precautions when creating MP3/  
WMA file  
Usable sampling rates and bit rates  
1. MP3: Sampling rate 8 kHz-48 kHz, Bit rate  
8 kbps-320 kbps / VBR  
Eject function  
Just pressing the [  
] button, ejects the disc.  
2. WMA: Bit rate 8 kbps-320 kbps  
Notes:  
If you force a CD into before auto  
File extensions  
reloading, this can damage the CD.  
If a CD (12 cm) is left ejected for 15  
seconds, the CD is automatically reloaded  
(Auto reload).  
1. Always add a file extension “.MP3”,  
“.WMA” to MP3, WMA file by using single  
byte letters. If you add a file extension  
other than specified or forget to add the  
file extension, the file cannot be played.  
2. Files without MP3/WMA data will not play.  
The files will be played soundlessly if you  
attempt to play files without MP3/WMA  
data.  
* When VBR files are played, the play time  
display may differ the play location.  
* When MP3/WMA files are played, a little  
no sound part is caused between tunes.  
Listening to a disc already loa  
ded in the unit  
Press the [SRC / ] button to select the CD/  
MP3/WMA mode.  
When the unit enters the CD/MP3/WMA  
mode, play starts automatically.  
Logical format (File system)  
Loading a CD  
1. When writing MP3/WMA file on a CD-R  
disc or CD-RW disc, please select  
“ISO9660 level 1, 2 or Joliet or Romeo” or  
Apple ISO as the writing software format.  
Normal play may not be possible if the  
disc is recorded on another format.  
2. The folder name and file name can be  
displayed as the title during MP3/WMA  
play but the title must be within 32 single  
Insert a CD into the center of the CD  
SLOT with label facing up. The CD plays  
automatically after loading.  
Notes:  
Never insert foreign objects into the CD  
SLOT.  
If the CD is not inserted easily, there may  
be another CD in the mechanism or the  
unit may require service.  
12  
CD/MP3/WMA Operations  
Fast-forward/Fast-reverse  
Fast-forward  
Discs without the  
or  
mark and  
TEXT  
CD-ROMs cannot be played by this unit.  
Some CD-R/CD-RW discs may not be  
usable.  
Press and hold the [  
Fast-reverse  
] button .  
Press and hold the [  
] button .  
* For MP3/WMA discs, it takes some time  
until the start of searching and between  
tracks. In addition, some error may occur in  
the play time.  
Pausing play  
1. Press the [ 4 ] button to pause play.  
PAUSE” appears in the display.  
2. To resume CD play, press the [ 4 ] button  
again.  
Folder Select  
This function allows you to select a folder  
containing MP3/WMA files and start playing  
from the first track in the folder.  
Displaying CD titles  
This unit can display title data for MP3/WMA  
disc.  
When SCROLL is OFF, each time you press  
the [BAND] button to change the title display.  
1. Press the [ 5 ] or [ 6 ] button.  
Press the [ 6 ] button to move the next  
folder. Press the [ 5 ] button to move the  
previous folder.  
2. To select a track, press the [  
button.  
] or [  
]
MP3/WMA disc  
Track -> Folder -> File title -> Album -> Title  
-> Artist -> Track ...  
Search Function  
Notes:  
1. Press the [MENU] button to enter FOLD  
SCH mode. Press the [VOLUME] button  
to enter the folder list search mode.  
2. Turn the [VOLUME] knob to select a folder.  
3. Press the [VOLUME] button to enter the  
file list search mode. And then the track  
list appears in the display.  
If MP3/WMA disc is not input TAG, “NO  
TITLE” appears in the display.  
Only ASCII characters can be displayed in  
Tags.  
Selecting a track  
Track-up  
1. Press the [  
the beginning of the next track.  
2. Each time you press the [  
4. Turn the [VOLUME] knob to select a track.  
5. Press the [VOLUME] knob to play.  
] button to move ahead to  
*
When play back MP3 / MWA file, this  
function is performed in the current folder.  
] button, the  
track advances ahead to the beginning of  
the next track.  
3. For MP3/WMA disc, press and hold the  
[6] button (1 sec.) to move ahead to +10  
tracks.  
Top function  
The top function resets the CD player to the  
first track of the disc. Press and hold the [ 4 ]  
button (1 sec.) to play the first track (track No.  
1) on the disc.  
Track-down  
*
In case of MP3/WMA, the first track of the  
current folder will be played.  
1. Press the [  
] button to move back to  
the beginning of the current track.  
2. Press the [  
] button twice to move back  
to the beginning of the previous track.  
3. For MP3/WMA disc, press and hold the [5]  
button (1 sec.) to move back to -10 tracks.  
13  
CD/MP3/WMA Operations  
MP3/WMA:  
Other various play functions  
1. Press the [ 2 ] button once or more until  
TRACK RPT” appears on the display to  
perform repeat play, and “RPT” segment  
lights on.  
Scan play  
This function allows you to locate and play  
the first 10 seconds of all the tracks recorded  
on a disc.  
2. For MP3/WMA files, press [ 2 ] button  
repeatedly until “FOLDER RPT” appears  
on the display for folder repeat play.  
3. Press [ 2 ] button repeatedly until “RPT  
OFF” appears on the display to cancel  
repeat playback, and “RPT” segment goes  
off.  
Press the [ 1 ] button to perform scan play.  
Repeat play  
This function allows you to play the current  
track repeatedly or play a track currently  
being played in the MP3/WMA folder  
repeatedly.  
CD:  
Random play  
1. Press the [ 2 ] button once or more until  
RPT ON” appears on the LCD to perform  
repeat play.  
2. Press [ 2 ] button repeatedly until “RPT  
OFF” appears on the LCD to cancel repeat  
playback.  
This function allows you to play all tracks  
recorded on a disc in a random order.  
Press the [ 3 ] button to perform random play.  
AUX Operations  
Press [SRC / ] button on the panel to select  
AUX”.  
AUX is just for audio content with 3.5mm  
Jack connector plugged into audio-in socket  
on the front panel.  
AUX Input sensitivity setting  
1. Press and hold the [D] button (1 sec.).  
2. Turn the [VOLUME] knob to select “AUX  
SENS”.  
3. If the output level of connected external  
audio player is “HIGH”, rotate [VOLUME]  
knob and choose “LOW”. And if the output  
level is “LOW”, choose “HIGH”.  
14  
6. TROUBLE SHOOTING  
GENERAL  
Problem  
Cause  
Unit fuse blown.  
Measure  
Replace with new fuse of correct rating.  
Replace with new fuse of correct rating.  
Unit can not  
power on.  
Car battery fuse blown.  
Turn off the power and remove the DCP.  
Press the [RESET] button with a thin rod.  
Unit can not  
power on.  
Note:  
Nothing happens  
when buttons are  
pressed.  
When the [RESET] button is pressed, turn  
The microprocessor has  
off the ACC power.*  
malfunctioned due to noise, etc.  
Display is not  
accurate.  
* When the [RESET] button is pressed,  
frequencies of radio stations, titles, etc.  
stored in memory are cleared.  
Improper audio output  
connection.  
Check wiring and correct.  
Volume set too low.  
Increase volume level.  
Replace speakers.  
No/low audio  
Speakers damaged.  
output.  
Adjust the channel balance to center  
position.  
Heavily biased volume balance.  
Speaker wiring is in contact with  
Insulate all speaker wiring connections.  
Use a standard disc.  
metal part of car.  
Non-standard disc used.  
Speaker power rating does not  
Poor sound  
quality or  
Replace speakers.  
match unit.  
distortion.  
Wrong connections.  
Check wiring and correct.  
Check wiring and correct.  
Speaker is shorted.  
Tel-Mute  
MUTE wire is grounded.  
Check the MUTE wiring and correct.  
malfunction.  
Unit resets itself  
when engine  
is off.  
Incorrect connection between  
ACC and Battery.  
Check wiring and correct.  
15  
DISC Player  
Problem  
Cause  
Measure  
Eject the disc before loading the new  
one.  
Another disc is already loaded.  
Disc cannot be  
loaded.  
There is an object install inside  
the unit.  
Remove the object inside the unit.  
Compact disc is dirty.  
Clean the compact disc with a soft cloth.  
Sound skips or is  
noisy.  
Compact disc is heavily scratched Replace with a compact disc with no  
or warped.  
scratches.  
Sound is bad  
Condensation may form on the  
when power is first internal lens when the car is  
Let dry for about 1 hour with power on.  
turned on.  
parked in a humid place.  
7. ERROR DISPLAYS  
If an error occurs, one of the following displays is displayed.  
Take the measures described below to solve the problem.  
Display  
Cause  
Measure  
Disc is inserted incorrectly.  
Eject the disc then reload it properly.  
ERROR 3  
The disc format is not supported.  
Try another disc.  
ERROR 5  
This is a failure of deck’s mechanism. Consult your store of purchase.  
If an error display other than the ones described above appears, press the [RESET] button. If  
the problem persists, turn off the power and consult your store of purchase.  
*
When the [RESET] button is pressed, frequencies of radio stations, titles, etc. stored in  
memory are cleared.  
16  
8. SPECIFICATIONS  
FM Tuner  
General  
Frequency range: 87.5-108.0MHz  
Usable sensitivity: 8dBμ  
Power supply voltage:  
14.4VDC (10.8 to 15.6V allowable),  
negative ground  
Pre-Amp output voltage:  
2.0V (CD play mode: 1kHz, 0dB, 10k load)  
Fuse: 15A  
Frequency response: 30Hz-15kHz  
Stereo separation: 30dB(1kHz)  
Signal/noise ratio: >55dB  
Dimensions of the Main Unit:  
188mm Width × 58mm Height × 190mm Depth  
Weight of the Main Unit: 1.30kg  
MW Tuner  
Frequency range: 531-1602kHz  
Usable sensitivity (S/N=20dB): 30dBμ  
LW Tuner  
Frequency range: 153-279kHz  
Usable sensitivity (S/N=20dB): 30dBμ  
CD Player  
System: Disc digital audio system  
Frequency response: 20Hz-20kHz  
Signal/noise ratio: >94dB  
Total harmonic distortion: Less than 0.1% (1kHz)  
Channel separation: >60dB  
Notes:  
Specifications and design are subject  
to change without notice for further  
improvement.  
MP3/WMA mode  
MP3 sampling rate: 8 kHz to 48 kHz  
MP3 bit rate: 8 kbps to 320 kbps / VBR  
WMA bit rate: 8 kbps to 320 kbps  
Logical format: ISO9660 level 1,2  
Joliet or Romeo file system  
Audio Amplifier  
Maximum power output:  
180W (45W x 4)  
Speaker impedance: 4 (4 to 8 allowable)  
Input  
Audio input sensitivity:  
High: 320mV (at 1V output)  
Mid: 650mV (at 1V output)  
Low: 1.3V (at 1V output)  
(input impedance 10 k or greater)  
Aux-in level: ≤2V  
17  
9. INSTALLATION / WIRE  
CONNECTION GUIDE  
CONTENTS  
1) Before Starting ...................................................................... 18  
2) Package Contents................................................................. 18  
3) General Cautions .................................................................. 18  
4) Cautions on Installation......................................................... 19  
5) Installing the Source Unit ...................................................... 19  
6) Removing the Source Unit .................................................... 21  
7) Wiring and Connections........................................................ 22  
8) Connecting the Accessories.................................................. 23  
1) Before Starting  
1. This set is exclusively for use in cars with a  
negative ground 12 V power supply.  
2. Read these instructions carefully.  
3. Be sure to disconnect the battery “terminal”  
before starting. This is to prevent short circuits  
during installation. (Figure 1)  
Car battery  
Figure 1  
2) Package Contents  
Source unit .......................................... 1  
Front panel .......................................... 1  
Trim ring .............................................. 1  
Mounting bracket................................. 1  
Special screw (M4x42) ........................ 1  
Screws M5x6 mm................................ 4  
Rubber cap.......................................... 1  
L-key.................................................... 2  
Wire connector .................................... 1  
DCP case ............................................ 1  
Owner’s manual................................... 1  
Warranty card...................................... 1  
Special screw (Front panel lock) ......... 1  
3) General Cautions  
1. Do not open the case. There are no  
user serviceable parts inside. If you  
drop anything into the unit during  
installation, consult your dealer or an  
authorized Clarion service center.  
2. Use a soft, dry cloth to clean the case.  
Never use a rough cloth, thinner,  
benzine, or alcohol etc. For tough dirt,  
apply a little cold or warm water to a  
soft cloth and wipe off the dirt gently.  
18  
4) Cautions on Installation  
1. Prepare all articles necessary for  
installing the source unit before  
starting.  
your car dealer beforehand.  
4. Use the enclosed screws for  
installation.  
2. Install the unit within 30° of the  
horizontal plane. (Figure 2)  
Using other screws can cause  
damage.  
3. If you have to do any work on the car  
body, such as drilling holes, consult  
(Figure 3)  
Chassis  
Chassis  
Damage  
Max 30˚  
Max. 6 mm (M5 screw)  
Figure 3  
Figure 2  
5) Installing the Source Unit  
1. Place the mounting bracket into the instrument panel, use a screwdriver to bend  
each stopper of the mounting bracket inward, then secure the stopper.  
2. Wire as shown in Section 7) .  
3. Insert the source unit into the mounting bracket until it locks.  
4. Take care of the top and bottom of the trim ring and mount it so that all the hooks  
are locked.  
Notes:  
1. Some car models require special mounting kits for proper installation.  
Consult your Clarion dealer for details.  
2. Fasten the front stopper securely to prevent the source unit from coming loose.  
• Console opening dimensions  
(182 mm)  
Hole  
19  
positive pole first and then the negative  
pole.  
7. DO NOT block the cooling fan exit to  
ensure sufficient heating dissipation of this  
unit, or it may result in damage to this unit.  
Notes of installation  
1. Before installation, please make sure  
proper connections are conducted and  
the unit operates normally. Improper  
connection may result in damage to the  
unit.  
2. Use only accessories designed and  
manufactured for this unit and other  
unauthorized accessories may result in  
damage to the unit.  
3. Before installation, please fasten all power  
cables.  
4. DO NOT install the unit in the place where  
close to hot area to prevent damage to  
electrical components such as the laser  
head.  
Unit Installation  
Method A  
1. Insert mounting bracket into dash board,  
choose appropriate mounting tab according  
to the gap width, bending the mounting  
tab outwards with a screwdriver to fix the  
mounting bracket in place.  
2. Screw in 1 piece of M4×42 to the hole of  
the unit back and put on a rubber cap over  
the screw. (see picture below)  
5. Install the unit horizontally. Installing the  
unit more than 30 degree vertically may  
result in worse performance.  
3. Slide the unit into the bracket until you hear  
a click sound.  
6. To prevent electric spark, connect the  
Screwdriver  
Dashboard  
Rubber Cap  
Special Screw  
Mounting Bracket  
20  
Method B  
6) Removing the Source Unit  
Disassemble trim ring  
1. Push the trim ring to right and pull out the  
right part.  
M5x6  
2. Push the trim ring to left and pull out the  
left part.  
Dashboard  
Mounting Frame  
1. Insert this unit directly to the opening of  
the dashboard.  
2. Place M5×6 cylindrical screw through the  
holes of the mounting frame located inside  
the opening to holes of the unit and fasten  
the screws to left & right.  
Disassemble the unit  
1. Switch off the power.  
2. Remove the panel.  
3. Remove the trim ring.  
4. Insert the removal keys straight back until  
they lock, then pull the unit out.  
Trim Ring Installation  
Attach the trim ring around the front panel.  
5. Disconnect all the wires.  
21  
7) Wiring and Connections  
White  
Red  
Black  
Black  
Rear audio output (Left) /  
Subwoofer output 1  
Rear audio output (Right) /  
Subwoofer output 2  
Black  
Black  
Steering wheel  
control terminal  
2 Channel Amplifier  
Fuse 15A  
Antenna  
(Black)  
C
B
1
3
5
7
A
2
4
6
8
1
2
4
6
8
3
5
7
Refer to next page  
22  
A
1
3
5
7
Rear right -  
Front right -  
Front left +  
Rear left +  
16  
14  
12  
10  
8
6
4
2
2
4
6
8
AMP Remote  
ACC +  
Ground  
C
B
Rear right +  
Front right +  
Front left -  
Rear left -  
Illumination  
Phone Mute  
15  
13  
11  
9
7
5
1
3
5
7
2
4
6
8
3
1
Battery +  
Function  
Location  
Connector A  
Connector B  
Phone Mute / Brown  
Rear right (+) / Purple  
Rear right (-) / Purple with black stripe  
Front right (+) / Gray  
Battery 12V(+) / Yellow  
Remote On / Blue with white stripe  
Illumination / Orange with white stripe  
ACC+ / Red  
Front right (-) / Gray with black stripe  
Front left (+) / White  
Front left (-) / White with black stripe  
Rear left (+) / Green  
Ground / Black  
Rear left (-) / Green with black stripe  
Yellow  
Red  
Yellow  
Red  
For VW and Audi: Change wiring like above.  
8) Connecting the Accessories  
• Connecting to the external amplifier  
External amplifiers can be connected to the 2 channel RCA output connections.  
Ensure that the connectors are not grounded or shorted to prevent damage to the  
unit.  
23  
English:  
Español:  
Declaration of conformity  
Declaración de conformidad  
We Clarion declares that this model CZ101E is  
following the provision of Directive 1999/5/EC with  
the essential requirements and the other relevant  
regulations.  
Clarion declara que este modelo CZ101E cumple  
con los requisitos esenciales y otras disposiciones  
aplicables descritos en la Directiva 1999/5/CE.  
Svenska:  
Français:  
Intyg om överensstämmelse  
Déclaration de conformité  
Härmed intygar Clarion att denna modell CZ101E  
uppfyller kraven i direktiv 1999/5/EG gällande  
väsentliga egenskaper och övriga relevanta  
bestämmelser.  
Nous, Clarion, déclarons que ce modèle CZ101E  
est conforme aux exigences essentielles et aux  
autres dispositions pertinentes de la directive  
1999/5/CE.  
Polski:  
Deutsch:  
Deklaracja zgodności  
Konformitätserklärung  
Firma Clarion niniejszym oświadcza, że model  
CZ101E jest zgodny z istotnymi wymogami oraz  
innymi odpowiednimi postanowieniami Dyrektywy  
1999/5/WE  
Wir, Clarion, erklären, dass dieses Modell CZ101E  
den Bestimmungen der Richtlinie 1999/5/EG im  
Hinblick auf die grundlegenden Anforderungen und  
andere relevante Bestimmungen entspricht.  
Ελληνικά:  
Italiano:  
Δήλωση συμμόρφωσης  
Dichiarazione di conformità  
Εμείς στην Clarion δηλώνουμε ότι αυτό το μοντέλο  
CZ101E τηρεί τις διατάξεις της Οδηγίας 1999/5/ΕΚ  
σχετικά με τις ουσιώδεις απαιτήσεις και τους άλλους  
σχετικούς κανονισμούς.  
Clarion dichiara che il presente modello CZ101E  
è conforme ai requisiti essenziali e alle altre  
disposizioni pertinenti stabiliti dalla direttiva 1999/5/  
CE.  
Italy  
Dichiarazione di conformità:  
Nederlands:  
Io mandatario nell’ UE: Clarion Europe S.A.S.  
Z.I. du Pré à Varois, Route de Pompey, 54670  
Custines, Francia Dichiaro che il prodotto  
CZ101E è conforme al DM 28-08-1995  
ottemperando alle prescrizioni dei DM  
25-06-1985 e DM 27-08-1987.  
Conformiteitsverklaring  
Clarion verklaart dat het model CZ101E in  
overeenstemming is met de essentiële eisen en  
andere relevante voorschriften van de bepalingen  
van Richtlijn 1999/5/EC.  
Ministerial authorization FI DM 27-08-1987 nº of  
protocol: 0053639 date 13/07/2010  
Clarion Europe S.A.S.  
Z.I. du Pré à Varois, Route de Pompey, 54670 Custines, FRANCE (Γαλλία)  
Clarion Co., Ltd.  
All Rights Reserved. Copyright © 2010: Clarion Co., Ltd.  
Printed in China / Imprimé en Chine / Gedruckt in China  
Stampato in Cina / Gedrukt in China / Impreso en China  
Tryckt i Kina / Wydrukowano w Chinach / Εκtυpώθηκe stην Κίνa  
PN: 127075002837  

ARC Audio 430 8 01 User Manual
Blaupunkt Mnchen CD51 User Manual
Bushnell Binoculars 202312 User Manual
Crate Amplifiers fxt120 User Manual
Eclipse Fujitsu Ten CD5425E User Manual
Focal K2 Power 165 KRC User Manual
Haier JC 82G User Manual
Jensen Phase Linear BT1613 User Manual
Jensen VM9312HD User Manual
JVC GET0241 001B User Manual