INSTRUCTIONS FOR SPEED RING 9500
Fits Lowel DP
CAUTION: THE DP SAFETY SCREEN MUST BE USED WITH THIS LIGHT FIXTURE/SPEED
RING COMBINATION.
Mounting the Speed Ring to the Light:
1-
2-
3-
Attach the safety screen to the DP light.
Loosen all brass thumbscrews and remove all four capture plates.
With the Speed Ring oriented so that the plates will be facing into the lightbank, slide the
Speed ring past the flange on the front of the light housing.
4-
Replace the capture plates, while squeezing the latch firmly against the Speed ring
between your thumb and forefinger, re-tighten the thumbscrews.
Parts list:
1
4
8
95051000
95002000
95005000
All metal Speed Ring
DP capture plates
8-32 x ½” thumbscrews
CHIMERA
95009700/011901
|