PEUBn.DgIMli-s78h7
English
Digital Video Camcorder
Instruction Manual
Caméscope Numérique
Français
Español
Manuel d’instruction
Videocámara digital
Manual de Instrucciones
Digital
Video
Mini
Cassette
Please read also the following instruction manual
(electronic version on PDF file). For further details refer to
the installation guide.
Digital Video Software
Instruction Manual
E
Version 23
Veuillez lire aussi le manuel d’instruction suivant (version
électronique sur fichier PDF). Pour d’autres détails référez-
vous au guide d’installation.
Lea también el siguiente manual de instrucciones (versión
electrónica en archivo PDF). Para mayores detalles,
refiérase a la guía de instalación.
• Digital Video Software
NTSC
3
Important Usage Instructions
WARNING!
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
For Canada only:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO DRIPPING OR SPLASHING.
WARNING!
TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING
INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.
COPYRIGHT WARNING:
Unauthorized recording of copyrighted materials may infringe on the rights of
copyright owners and be contrary to copyright laws.
Digital Video Camcorder, ZR850/ZR830 A systems
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and use in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual.
If such changes or modifications should be made, you could be required to stop operation of the equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516)328-5600
Important Warning
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure, that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
The exclamation point, within an equilateral
triangle, is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
QUALIFIED SERVICE PERSONNEL.
4
IMPORTANT SAFETY INSTRUCTIONS
In these safety instructions the word
“apparatus” or “product” refers to the Canon
Digital Video Camcorder ZR850/ZR830 A and
all its accessories.
17 Placing or Moving — Do not place on an
unstable cart, stand, tripod, bracket or
table. The product may fall, causing
serious injury to a child or adult, and
serious damage to the product. A product
and cart combination should be moved
with care. Quick stops, excessive force,
and uneven surfaces may cause the
product and cart combination to overturn.
1
2
3
4
5
6
7
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
18 Power Sources — The product should be
operated only from the type of power
source indicated on the marking label. If
you are not sure of the type of power
supply to your home, consult your product
dealer or local power company. Regarding
other power sources such as battery
Do not use this apparatus near water.
Clean only with dry cloth.
Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
power, refer to instructions in this manual.
19 Overloading — Do not overload wall outlets
and extension cords as this can result in a
risk of fire or electric shock.
8
9
Protect the power cord from being walked
on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
20 Objects and Liquid Entry — Never push
objects of any kind into this product
through openings as they may touch
dangerous voltage points or short out parts
that could result in a fire or electric shock.
Be careful not to spill liquid of any kind onto
the product.
Unplug this apparatus during lightning
storms or when unused for long periods of
time.
10 Read instructions — All the safety and
operating instructions should be read
before the product is operated.
21 Servicing — Do not attempt to service this
product yourself as opening or removing
covers may expose you to dangerous
voltage or other hazards. Refer all
11 Retain instructions — The safety and
operating instructions should be retained
for future reference.
12 Heed Warnings — All warnings on the
product and in the operating instructions
should be adhered to.
servicing to qualified service personnel.
22 Power Sources — The CA-590 Compact
Power Adapter should be operated only
from the type of power source indicated on
the marking label. If you are not sure of the
type of power supply to your home, consult
your product dealer or local power
13 Follow instructions — All operating and
maintenance instructions should be
followed.
14 Cleaning — Unplug this product from the
wall outlet before cleaning. Do not use
liquid or aerosol cleaners. The product
should be cleaned only as recommended
in this manual.
company. Regarding other power sources
such as battery power, refer to instructions
in this manual.
23 Lightning — For added protection of this
product during a lightning storm, or when it
is left unattended and unused for long
periods of time, disconnect it from the wall
outlet and disconnect the antenna. This will
prevent damage to the product due to
lightning and power-line surges.
15 Avoid magnetic or electric fields — Do not
use the camera close to TV transmitters,
portable communication devices or other
sources of electric or magnetic radiation.
They may cause picture interference, or
permanently damage the camera.
16 Water and Moisture — Hazard of electric
shock — Do not use this product near
water or in rainy/moist situations.
24 Overloading — Do not overload wall outlets
and extension cords as this can result in a
risk of fire or electric shock.
5
25 Damage Requiring Service — Disconnect
this product from the wall outlet and all
power sources including battery, and refer
servicing to qualified service personnel
under the following conditions:
26 Replacement Parts — When replacement
parts are required, be sure the service
technician has used replacement parts that
are specified by Canon or that have the
same characteristics as the original part.
Unauthorized substitutions may result in
fire, electric shock or other hazards.
a. When the plug is damaged.
b. If any liquid has been spilled onto, or
objects have fallen into, the product.
c. If the product has been exposed to rain
or water.
d. If the product does not operate normally
even if you follow the operating
instructions. Adjust only those controls
that are covered by the operation
instructions. Improper adjustment of
other controls may result in damage and
will often require extensive work by a
qualified technician to restore the
product to its normal operation.
27 Safety Check — Upon completion of any
service or repairs to this product, ask the
service technician to perform safety
checks to determine that the product is in
safe operating order.
e. If the product has been dropped or the
cabinet has been damaged.
f. When the product exhibits a distinct
change in performance. This indicates a
need for service.
When replacement of the power supply is required, please return it to the responsible nearest
Canon Service Center and please replace it with the same type number CA-590.
This Class B digital apparatus complies with Canadian ICES-003.
The Mains plug is used as the disconnect device. The Mains plug shall remain readily operable to
disconnect the plug in case of an accident.
The adapter can be used with a power supply between 100 and 240 V AC. For areas where
120 V AC power is not used, you will need a special plug adapter. Contact your nearest Canon
Service Center for further information.
The adapter is not intended to be serviced. Should the product cease to function in its intended
manner, it should be returned to the manufacturer or be discarded.
9
About this Manual
Thank you for purchasing the Canon ZR850/ZR830. Please read this manual carefully
before you use the camcorder and retain it for future reference. Should your camcorder
fail to operate correctly, refer to the Troubleshooting table (
Conventions Used in the Manual
ꢀ
ꢀ
ꢀ
IMPORTANT: Precautions related to the camcorder’s operation.
NOTES: Additional topics that complement the basic operating procedures.
POINTS TO CHECK: Restrictions that apply if the function described is not
available in all operating modes (the operating mode to which the camcorder should be
set, etc.).
ꢀ
ꢀ
: Reference page number.
: Option or feature that applies to or is available only with a specific model.
ꢀ“Screen” refers to the LCD and the viewfinder screen.
ꢀThe photos included in the manual are simulated pictures taken with a still camera.
Note that unless indicated otherwise, illustrations in this manual refer to the
model.
First Time Settings
First Time Settings
Changing the Language
The language for on-screen and menu
displays can be changed. The list of
available languages depends on the
region where you purchased the
camcorder.
Menu item shown at its default position
Buttons and switches to be operated
Language Set
English, German, Spanish, French, Italian, Polish,
Russian, Simplified Chinese and Japanese.
A
Language Set
B
English, Simplified Chinese, Traditional Chinese
and Korean.
Default value
DISPLAY SETUP/
Brackets [ ] and capital letters are used to refer to menu
options as they are displayed on screen. Menu options in
boldface indicate the default setting (for example [ON],
[OFF]).
LANGUAGE ENGLISH
FUNC.
(
24)
1
2
Press
Select (
(
.
FUNC.
) the
) to open the setup menus.
icon and press
3
4
5
6
Select (
and press (
Select (
) [DISPLAY SETUP/
).
) [LANGUAGE] and press
]
(
).
Select (
press (
Press
) the desired option and
Names of buttons and switches other than the
joystick are indicated within a “button” frame
).
FUNC.
to close the menu.
NOTES
If you changed the language by mistake,
FUNC.
(for example
).
follow the mark next to the menu item to
About the Joystick and the Joystick Guide
The mini joystick allows you to control many of the camcorder’s operations and to
make selections and changes in the camcorder’s menus.
Push the joystick up, down, left or right (
item or change settings.
,
) to select an
Press the joystick itself (
) to save the settings or confirm an
action. On menu screens, this is indicated by the joystick icon
.
10
The functions assigned to the joystick change according to the operation mode. You can
display the joystick guide to remind you of the joystick’s functions in each operating mode.
Recording movies:
Playing back movies:
Recording still images: Playing back still images:
EXP
EXP
FOCUS
FOCUS
About the Operating Modes
The camcorder’s operating mode is determined by the positions of the
switch and the
/
switch. In the manual,
indicates that a function is available in the operating
mode shown and
indicates that the function is not available. When no operating mode
icons are given, the function is available in all operating modes.
Operating Mode
Switch
/
Switch
Icon Display
Operation
Recording movies
on the tape
CAMERA
(Tape)
Playing movies
from the tape
PLAY
Recording still images
or movie clips on the
memory card
CAMERA
(Memory card)
Playing back still images
or movie clips from the
memory card
PLAY
Trademark Acknowledgements
is a trademark.
• The SD logo is a trademark. The SDHC logo is a trademark.
•
®
• Windows is a registered trademark of Microsoft Corporation in the United States and/or
other countries.
• Macintosh and Mac OS are trademarks of Apple Computer, Inc., registered in the United
States and other countries.
• Other names and products not mentioned above may be trademarks or registered
trademarks of their respective companies.
11
Getting to Know the Camcorder
Getting to Know the Camcorder
Supplied Accessories
CA-590 Compact Power BP-2L5 Battery Pack
Adapter
Lithium Button Battery
CR1616
STV-250N Stereo Video
Cable
WL-D85 Wireless
Controller
Lithium Button Battery
CR2025 for Wireless
Controller
IFC-300PCU
USB Cable
DIGITAL VIDEO
SOLUTION DISK
Software CD-ROM*
* Includes the electronic version of the Digital Video Software instruction manual on PDF file.
Online product registration for U.S.A. Customers only.
9 Protect your product
We will keep the model number and date of purchase of your new Canon product on
file to help you refer to this information in the event of an insurance claim such as loss
or theft.
9 Receive information on new products and promotions
Upon your request, we will send you information on Canon new products and
promotions.
The serial number of this product can be found at the battery attachment unit of the
camcorder. Write down the number and other information here and retain this book as a
permanent record of your purchase to aid identification in case of theft.
Date of Purchase:
Purchased From:
Dealer Address:
Dealer Phone No.:
Model Name: ZR850/ZR830 A
Serial No.:
12
Getting to Know the Camcorder
Components Guide
Left side view
Lens cover switch (
open, closed)
CARD access indicator ( 29, 30)/
(
CHARGE indicator (
Speaker
Memory card slot (
AV terminal (
USB terminal (
DV terminal (
Terminal cover
Grip belt (
Strap mount
Lock button
(
Right Side View
switch (
QUICK START button (
LED light (assist lamp) (
Stereo microphone
Names of buttons and switches other than the
joystick are indicated within a “button” frame (for
FUNC.
example
).
Front view
13
Getting to Know the Camcorder
Back view
Viewfinder (
Dioptric adjustment lever (
BATT. (battery release) switch (
Backup battery compartment (
Serial number, Battery attachment unit
DC IN terminal (
D.EFFECTS button (
(
P.SET button (
FUNC. button (
Joystick (
PHOTO button (
Zoom lever (
Mode switch (
Easy recording
Top view
Recording programs
/
(tape/card) switch (
Cassette compartment cover
(
(
(
(
Names of buttons and switches other than the
joystick are indicated within a “button” frame (for
FUNC.
example
).
Bottom view
14
Getting to Know the Camcorder
Wireless Controller WL-D85
START/STOP button (
CARD –/+ buttons (
buttons (
DATE SEARCH
/
START/
STOP PHOTO
ZOOM
REW
button (
button (
button (
button (
CARD
PAUSE
SLOW
DATE SEARCH
AUDIO DUB. button (
REW
PLAY
STOP
FF
ZERO SET MEMORY button (
PHOTO button (
TV SCREEN button (
Zoom buttons (
PAUSE
SLOW
PLAY
FF
button (
button (
button (
button (
ZERO SET
AUDIO DUB. MEMORY
TV SCREEN
STOP
button (
-
WIRELESS CONTROLLER WL D85
15
Getting to Know the Camcorder
Screen Displays
Recording Movies
Zoom (
(
Recording program (
White balance (
Image effect (
LED light (
Condensation warning (
Still image quality/size
(simultaneous recording) (
Exposure adjustment (
Playing Movies
Manual focus (
Image stabilizer (
Recording mode (
Tape operation
Time code (hours : minutes : seconds)
Remaining tape
Remaining battery charge
Widescreen 16:9 mode (
Audio recording mode (
Remote sensor off (
Backup battery warning
Level marker (
Recording reminder
Operating mode (
Audio playback mode (
Search function display
END SEARCH (
Movie size for capturing video on the
Quality/size for capturing still images (
Playback time
(hours : minutes : seconds : frames)
Joystick guide (
Data code (
16
Getting to Know the Camcorder
Tape operation
Remaining battery charge
Record,
Stop,
Record pause,
Eject,
Fast forward,
Playback,
Reverse playback pause,
Rewind,
Playback pause,
• When “
” starts flashing in red replace
the battery pack with a fully charged one.
• When you attach an empty battery pack,
the power may turn off without displaying
x1 Playback (normal speed),
x1 Reverse playback (normal speed),
x2 Playback (double speed),
x2 Reverse playback (double speed),
Fast forward playback,
Rewind playback,
“
”.
• Depending on the conditions under which
the camcorder and the battery pack are
used, the actual battery charge may not be
indicated accurately.
Slow playback,
Slow reverse playback,
Frame advance,
Backup battery warning
Frame reverse,
flashes in red when the lithium button
battery is not installed, or when it needs to
be replaced.
/
Date search (
/
Zero set memory (
Remaining tape
Recording reminder
Indicates the remaining time of the tape in
minutes. “ ” moves during recording.
When the tape reaches its end, the display
changes to “ END”.
The camcorder counts from 1 to 10
seconds when you start recording. This is
helpful to avoid scenes that are too short.
• When the time left is less than 15
seconds, the remaining tape time may not
appear.
• Depending on the type of tape, the
remaining time displayed may not be
correct. In any case, you will be able to
record on the tape the number of minutes
that appears on the videocassette’s label
(for example, 85 minutes).
17
Getting to Know the Camcorder
Recording Still Images
Zoom (
(
Recording program (
White balance (
Image effect (
LED light (
Movie clip size (movie recorded on the
Still image quality/size (
Number of still images available on the
memory card
Movie recording time available on the
memory card
Wind screen off (
AF frame (
Joystick guide (
Camcorder shake warning (
Viewing Still Images
Slideshow (
Image protection mark (
Current image /Total number of images
Still image size
Data code (
Movie clip length (movie recorded on the
memory card)
18
Getting to Know the Camcorder
Number of still images available on the memory card
Depending on the recording conditions, the number of available still images displayed
may not decrease even after a recording has been made, or may decrease by 2 still
images at once.
Card Access Display
“
” is displayed next to the number of images available while the camcorder is writing
on the memory card.
Movie recording time on the memory card
Indicates the remaining time in hours : minutes. At less than 1 minute, the remaining time
will be displayed in 10-second steps, at less than 10 seconds in 1-second steps.
• Depending on the recording conditions, the actual remaining time may not be indicated
accurately.
19
Getting Started
Preparations
Getting Started
DC IN
terminal
Getting Started
CHARGE
indicator
Charging the Battery Pack
The camcorder can be powered with a
battery pack or directly using the compact
power adapter. Charge the battery pack
before use.
Remove the battery
terminal cover before
attaching the battery
3 Plug the compact power adapter
into a power outlet.
4 Connect the compact power adapter
to the camcorder’s DC IN terminal.
• The CHARGE indicator starts
flashing. The indicator will stay on
when the charging is completed.
• You can also use the compact power
adapter without attaching a battery
pack.
BATT. switch
• When the compact power adapter is
connected, even if a battery is
attached its power will not be
consumed.
1 Turn off the camcorder.
2 Attach the battery pack to the
camcorder.
• Press the battery pack lightly and
slide it down until it clicks.
ONCE THE BATTERY IS FULLY CHARGED
1 Disconnect the compact power
adapter from the camcorder.
2 Unplug the compact power adapter
from the power outlet.
TO REMOVE THE BATTERY PACK
Press
to release the battery
BATT.
pack. Lift the battery pack and then
pull it out.
20
Getting Started
IMPORTANT
NOTES
ꢀYou may hear some noise from the compact
power adapter during use. This is not a
malfunction.
ꢀWe recommend charging the battery pack in
temperatures between 10 °C and 30 °C (50 °F
and 86 °F). Outside the temperature range of
0 °C to 40 °C (32 °F to 104 °F), the charging will
not start.
ꢀThe CHARGE indicator also serves as a
rough estimate of the battery charge status.
Continuously on: Battery fully charged.
Flashes approx. twice per second: Battery over
50% charged.
Flashes approx. once per second: Battery less
than 50% charged.
ꢀ
The charging time will vary depending on the
ꢀDo not connect to the camcorder’s DC IN
terminal or to the compact power adapter any
electrical equipment that is not expressly
recommended for use with this camcorder.
ꢀTo prevent equipment breakdowns and
excessive heating, do not connect the supplied
compact power adapter to voltage converters for
overseas travels or special power sources such
as those on aircraft and ships, DC-AC inverters,
etc.
surrounding temperature and the battery pack’s
initial charge condition. In cold places, the
effective usage time of the battery will decrease.
ꢀWe recommend that you prepare battery
packs 2 to 3 times longer than you think you
might need.
ꢀ
U.S.A. and Canada only: The lithium
ion/polymer battery that powers this
product is recyclable. Please call
1-800-8-BATTERY for information
on how to recycle this battery.
Charging, Recording and Playback Times
The times given in the table below are approximate and vary depending on the actual
charging, recording or playback conditions.
Battery Pack
BP-2L5
NB-2L
NB-2LH
BP-2L12
BP-2L14
Charging Time
145 min. 150 min. 160 min. 240 min. 285 min.
Maximum Recording Times
Viewfinder
95 min.
90 min.
90 min.
105 min. 125 min. 225 min. 275 min.
105 min. 125 min. 225 min. 275 min.
105 min. 125 min. 215 min. 265 min.
LCD [NORMAL]
LCD [BRIGHT]
Typical Recording Times*
Viewfinder
50 min.
50 min.
45 min.
55 min.
55 min.
50 min.
70 min.
70 min.
65 min.
120 min. 150 min.
120 min. 150 min.
115 min. 140 min.
LCD [NORMAL]
LCD [BRIGHT]
Playback Times
105 min. 120 min. 145 min. 255 min. 310 min.
Maximum Recording Times
Viewfinder
105 min. 120 min. 145 min. 250 min. 305 min.
100 min. 120 min. 145 min. 245 min. 300 min.
LCD [NORMAL]
LCD [BRIGHT]
Typical Recording Times*
Viewfinder
95 min.
110 min. 135 min. 230 min. 280 min.
60 min.
55 min.
50 min.
65 min.
65 min.
60 min.
80 min.
80 min.
75 min.
135 min. 165 min.
130 min. 165 min.
125 min. 155 min.
LCD [NORMAL]
LCD [BRIGHT]
Playback Times
110 min. 125 min. 150 min. 265 min. 320 min.
* Approximate times for recording with repeated operations such as start/stop, zooming, power on/off.
21
Getting Started
Installing the Backup Battery
The backup battery (lithium button battery
Inserting and Removing a Tape
Use only videocassettes marked with the
logo.
CR1616) allows the camcorder to retain the
date, time (
settings while the power source is
disconnected. Connect a power source to
the camcorder when replacing the backup
battery to retain the settings.
OPEN/EJECT
1 Slide
fully in the
direction of the arrow and open the
cassette compartment cover.
The cassette compartment opens
automatically.
1 If a battery pack is attached, remove
it first.
2 Open the backup battery cover.
3 Insert the backup battery with the
+ side facing out.
2 Insert the cassette.
• Insert the cassette with the window
facing the grip belt.
• To remove a cassette pull it straight
out.
3 Press the
mark on the
cassette compartment until it clicks.
4 Close the cover.
NOTES
The backup battery has a life span of about a
year.
flashes in red to inform you that it
needs to be replaced.
4 Wait for the cassette compartment
to retract automatically and close
the cassette compartment cover.
22
Getting Started
IMPORTANT
IMPORTANT
ꢀDo not interfere with the cassette
compartment while it is opening or closing
automatically, or attempt to close the cover
before the cassette compartment has fully
retracted.
ꢀMake sure to initialize all memory cards
before using them with this camcorder for the
first time (
ꢀMemory cards have front and back sides that
are not interchangeable. Inserting a memory
card facing the wrong direction can cause a
malfunction of the camcorder.
ꢀBe careful not to get your fingers caught in
the cassette compartment cover.
NOTES
NOTES
If the camcorder is connected to a power
source, cassettes can be inserted/removed
ꢀProper operation cannot be guaranteed for all
memory cards.
even if the
switch is set to
.
ꢀAbout SDHC Memory Cards: SDHC (SD
High Capacity) is the new type of SD memory
cards with capacities over 2 GB. Please note
that the specifications of SDHC memory cards
are different from those of regular SD cards and
you will not be able to use memory cards of
over 2 GB with devices that do not support
SDHC. However, SDHC devices (including this
camcorder) are backward compatible and you
can use regular SD cards with them.
Inserting and Removing a Memory Card
You can use commercially available
SDHC memory cards,
cards or MultiMedia cards (MMC) with
this camcorder.
SD memory
Preparing the Camcorder
1 Turn off the camcorder.
2 Open the memory card slot cover.
3 Insert the memory card straight all
the way into the memory card slot.
4 Close the cover.
Do not force the cover closed if the
memory card is not correctly inserted.
TO REMOVE THE MEMORY CARD
First push the memory card once to
release it, and then pull the card out.
1 Turn on the camcorder.
2 Move the lens cover switch down to
to open the lens cover.
23
Getting Started
3 Adjust the viewfinder.
Point the controller at the camcorder’s
remote sensor when you press the
buttons.
Keep the LCD panel closed to use the
viewfinder and adjust the dioptric
adjustment lever as necessary.
4 Fasten the grip belt.
NOTES
Adjust the grip belt so that you can
reach the zoom lever with your index
finger, and the start/stop button with
your thumb.
ꢀThe wireless controller may not work properly
when the remote sensor is situated under
strong light sources or direct sunlight.
ꢀIf the wireless controller does not work, check
that [WL.REMOTE] is not set to [OFF
43). Otherwise, replace the battery.
]
(
The Wireless Controller
Inserting the Battery
Adjusting the LCD Screen
Rotating the LCD Panel
(Lithium Button Battery CR2025)
Open the LCD panel 90 degrees.
You can rotate the panel 90 degrees
downward.
180°
Tab
1 Press the tab in the direction of the
arrow and pull out the battery
holder.
2 Place the lithium button battery with
the + side facing up.
90°
3 Insert the battery holder.
You can rotate the panel 180 degrees
toward the lens (allowing the subject to
monitor the LCD screen while you use the
viewfinder). Rotating the panel 180
degrees is also useful if you wish to
include yourself when recording with the
self timer.
Using the Wireless Controller
24
Using the Menus
Using the Menus
Using the Menus
Many of the camcorder’s functions can be
adjusted from the menus that open after
FUNC.
pressing the FUNC. button (
).
For details about the available menu
options and settings, refer to Menu
Options Lists (
Subject can monitor the
LCD screen
Selecting a FUNC. Menu Option
LCD Backlight
You can set the brightness of the LCD
screen at normal or bright.
FUNC.
FUNC.
1 Press
2 Select (
.
) the
icon and press
(
) to open the setup menus.
3 Select (
] and press (
) [
DISPLAY SETUP/
).
4 Select (
press (
5 Select (
press (
) [BACKLIGHT] and
).
) the desired option and
).
FUNC.
6 Press
to close the menu.
NOTES
ꢀThis setting does not affect the brightness of
the recording or the viewfinder screen.
ꢀUsing the [BRIGHT] setting will shorten the
effective usage time of the battery pack.
FUNC.
1 Press
.
2 Select (
) the icon of the function
you want to change from the left
side column.
3 Select (
) the desired setting from
the available options at the bottom
bar.
The selected option will be highlighted
in light blue. Menu items not available
will appear grayed out.
25
Using the Menus
FUNC.
4 Press
to save the settings
The title of the selected menu appears
on top of the screen and under it the
list of settings.
and close the menu.
• You can press
FUNC.
to close the
menu at any time.
• With some settings you will need to
press ( ) and make further
selections. Follow the additional
operation guides that will appear on
the screen (such as the joystick
icon , small arrows, etc.).
4 Select (
) the setting you want to
change and press (
).
• An orange frame will indicate the
menu item currently selected. Menu
items not available will appear grayed
out.
• To return to the menu selection
screen, select ( ) [ RETURN] and
press (
5 Select (
press (
).
) the desired option and
) to save the setting.
Selecting an Option from the Setup
Menus
6 Press
.
FUNC.
FUNC.
You can press
to close the
menu at any time.
FUNC.
1 Press
.
2 Select (
) the
icon and press
(
) to open the setup menus.
FUNC.
You can also hold
pressed
down for more than 2 seconds to open
directly the setup menus screen.
3 Select (
) the desired menu from
).
the left side column and press (
26
First Time Settings
First Time Settings
of buttons on the camcorder and will not
First Time Settings
change, regardless of the language selected.
Changing the Language
The language for on-screen and menu
displays can be changed. The list of
available languages depends on the
region where you purchased the
camcorder.
Changing the Time Zone
Default value
DATE/TIME SETUP
Language Set A
English, German, Spanish, French, Italian, Polish,
Russian, Simplified Chinese and Japanese.
T.ZONE/DST NEW YORK
Language Set B
English, Simplified Chinese, Traditional Chinese
and Korean.
FUNC.
Default value
FUNC.
1 Press
2 Select (
.
DISPLAY SETUP/
) the
icon and press
(
) to open the setup menus.
3 Select ( ) [DATE/TIME SETUP]
and press ( ).
LANGUAGE ENGLISH
4 Select (
press (
) [T.ZONE/DST] and
).
FUNC.
The time zone setting appears. The
default setting is New York or
Singapore, depending on the region of
purchase.
1 Press
2 Select (
.
FUNC.
) the
icon and press
5 Select (
press (
To adjust for daylight saving time,
) your time zone and
(
) to open the setup menus.
).
3 Select (
and press (
4 Select (
).
) [DISPLAY SETUP/
]
).
select the time zone with the
next to the area.
mark
) [LANGUAGE] and press
) the desired option and
(
6 Press
to close the menu.
FUNC.
5 Select (
press (
6 Press
).
Time Zones
to close the menu.
FUNC.
Once you have set the time zone, date
and time, you do not need to reset the
clock every time you travel to another
time zone. Select the time zone referring
to the date and time displayed on the
screen.
NOTES
ꢀIf you changed the language by mistake,
follow the mark next to the menu item to
change the setting.
ꢀThe displays
and
that appear
in some print-related screens refer to the name
27
First Time Settings
Setting the Date and Time
DATE/TIME SETUP
DATE/TIME JAN. 1, 2007 12:00 AM
FUNC.
FUNC.
1 Press
2 Select (
.
) the
icon and press
(
) to open the setup menus.
3 Select (
and press (
4 Select (
).
) [DATE/TIME SETUP]
).
) [DATE/TIME] and press
(
Blinking arrows will be displayed
around the first field of the date.
5 Change each field of the date and
time with the joystick’s (
move ( ) to the next field.
) and
6 Press ( ) to start the clock.
7 Press
to close the menu.
FUNC.
NOTES
You can also change the date format (
28
Recording
Basic Functions
Recording
TO REVIEW THE LAST SCENE RECORDED
Recording
Recording Movies
Before You Begin Recording
Make a test recording first to check if the
camcorder operates correctly. If
necessary, clean the video heads (
(
EXP
FOCUS
1 Set the mode switch to
2 If the joystick guide does not appear
on screen, press ( ) to display it.
3 Push the joystick ( ) momentarily
towards and release it.
.
• The camcorder will play back a few
seconds of the last recording made
and return to record pause mode.
• You can also hold the joystick
pressed ( ) towards
towards to play back the tape
(reverse or forward respectively) to
locate the point where you want to start
recording.
or (
)
1 Move the lens cover switch down to
to open the lens cover.
2 Holding the lock button pressed
down, set the
CAMERA.
switch to
WHEN YOU HAVE FINISHED RECORDING
Close the lens cover and the LCD
3 Move the
(tape).
/
switch to
1
panel
.
Start/Stop
4 Press
to begin recording.
again to pause the
2 Turn off the camcorder.
3 Remove the tape.
4 Disconnect the power source and
remove the battery pack.
Start/Stop
Press
recording.
29
Recording
NOTES
Recording Still Images on the Memory
Card
ꢀ
About the recording time: By changing the
recording mode you can change the video
quality and as a result, also the available
Before using a memory card for the first
time, be sure to initialize it with this
recording time (
ꢀPrevious recordings overwritten by a new
recording cannot be recovered. Before you start
recording, search for the end of the last
camcorder (
(
recording (
ꢀTo protect the tape and video heads, the
camcorder will enter the stop mode ( ) if left in
record pause (
) mode for 4 minutes 30
seconds. To resume recording press Start/Stop
ꢀWhen recording in very loud places (such as
fireworks shows or concerts), sound may
become distorted or it may not be recorded at
the actual levels. This is not a malfunction.
.
ꢀ
About the Power Save mode: To save power
when the camcorder is powered by a battery
pack, the camcorder will automatically shut off if
left without any operations for 5 minutes
(
43). To restore the power, turn the
camcorder off and then on again.
ꢀ
About the LCD and viewfinder screen: The
screens are produced using extremely high-
precision manufacturing techniques, with more
than 99.99% of the pixels operating to
specification. Less than 0.01% of the pixels
may occasionally misfire or appear as black,
red, blue or green dots. This has no effect on
the recorded image and does not constitute a
malfunction.
1 Move the lens cover switch down to
to open the lens cover.
2 Holding the lock button pressed
down, set the
CAMERA.
switch to
ꢀ
When using a tripod: Do not
leave the viewfinder exposed to
direct sunlight as it may melt
(due to concentration of the light
by the lens). Do not use tripods
with fastening screws longer
than 5.5 mm (0.2 inch). Doing
so may damage the camcorder.
3 Move the
(memory card).
PHOTO
/
switch to
4 Press
.
• Once the focus is automatically
adjusted, will turn green and one or
more AF frames will appear.
• The CARD access indicator will flash
as the image is being recorded.
ꢀ
When recording movies, try to get a calm, stable
picture.
Excessive camcorder movement while shooting
and extensive use of fast zooms and panning
can result in fidgety, jittery scenes. In extreme
cases the playback of such scenes may result
in visually induced motion sickness. If you
experience such a reaction, immediately stop
the playback and take a rest break as
necessary.
30
Recording
FUNC.
6 Press
to close the menu.
IMPORTANT
TO RECORD THE MOVIE CLIP
Avoid the following actions while the card
access display ( ) appears on screen and
when the CARD access indicator is on or
flashing. Failing to do so may result in
permanent data loss.
- Do not open the memory card slot cover and
do not remove the memory card.
- Do not disconnect the power source or turn off
the camcorder.
- Do not change the position of the
switch or the operating mode.
Start/Stop
7 Press
to begin recording.
• Press Start/Stop again to pause the
recording.
• SD/SDHC memory cards: You can
record until "CARD FULL" appears
(approx. 33 minutes with a 512 MB SD
Memory Card). MultiMedia cards:
The recording time is limited to 10
/
seconds at [
seconds at [
320x240] or 30
160x120].
NOTES
IMPORTANT
If the subject is not suitable for autofocus,
turns yellow. Adjust the focus manually (
Avoid the following actions while the card
access display ( ) appears on screen and
when the CARD access indicator is on or
flashing. Failing to do so may result in
permanent data loss.
ꢀDo not open the memory card slot cover and
do not remove the memory card.
ꢀDo not disconnect the power source or turn
off the camcorder.
Recording Movie Clips on the Memory
Card
You can record Motion JPEG movie clips
on the memory card. The sound for the
movies on the memory card will be
monaural.
ꢀDo not change the position of the
/
switch or the operating mode.
ꢀ Do not insert/remove a tape while recording
movie clips on the memory card.
(
NOTES
1 Move the lens cover switch down to
to open the lens cover.
We recommend using a Canon SD Memory
Card, or an SD Memory Card with a transfer
rate of more than 2 MB/sec., after having
initialized it with this camcorder. With memory
cards not initialized with this camcorder, or after
repeated times of recording/erasing the card,
the writing speed may fall and the recording
may stop.
2 Holding the lock button pressed
down, set the
CAMERA.
switch to
3 Move the
/
switch to
(memory card).
TO SELECT THE MOVIE CLIP SIZE
Windows XP users: When you plan to connect
the camcorder to a computer, keep the length of
one movie clip shorter than approx. 12 minutes
FUNC.
4 Press
.
5 Select (
) [
MOVIE REC OFF]
) the desired movie
at [
[
320x240] or 35 minutes at
160x120].
and select (
size.
The number displayed on the right
corner indicates the approximate
recording time available on the
memory card.
31
Recording
Zooming
POINTS TO CHECK
Quick Start Function
Using the Quick Start function, you'll
never have to miss out on those great
and fleeting opportunities to take a picture
or record video. When you press
(
: In addition to the 35x optical
zoom, the digital zoom (up to 1000x) is
QUICK START
instead of turning off the
camcorder, you can get it ready to start
recording within approx. 1 second.
POINTS TO CHECK
Zoom out
(
: You cannot enter the Quick-
Start ready mode while recording.
Zoom in
35x Optical Zoom
Move the zoom lever toward W to
zoom out (wide-angle). Move it toward
T to zoom in (telephoto).
You can also change the zoom speed
(
39). You can select one of three fixed
zoom speeds or a variable speed that
depends on how you operate the zoom
lever: Press gently for a slow zoom; press
harder for faster zooms.
QUICK START
1 Press
.
• The QUICK START button lights up
to signal that the camcorder is Quick-
Start ready – “ready and waiting” to
start recording.
• Sometimes the QUICK START
button will flash as the camcorder
completes some preparations. The
camcorder is Quick-Start ready when
the button stops flashing and stays on.
2 When you wish to resume
NOTES
ꢀYou can also use the T and W buttons on the
wireless controller. The zoom speed with the
wireless controller will be the same as with the
camcorder (when one of the fixed zoom speed
levels is selected) or fixed at [SPEED 3] (when
[VARIABLE] is selected).
QUICK START
recording, press
ꢀWhen set to [VARIABLE], the zoom speed will
be faster in the record pause mode.
ꢀKeep at least 1 m (3.3 ft.) to the subject. At
wide-angle, you can focus on a subject as close
as 1 cm (0.39 in.).
again.
Within approx. 1 second, the
camcorder is ready in record pause
mode.
32
Playback
Playback
NOTES
Playback
ꢀWhen you wake up the camcorder from Quick
Start mode, the following settings will be
changed automatically.
Playing Back Movies
Play back the tape on the LCD display or
close the LCD panel to use the
viewfinder. You can also turn the LCD
panel and close it with the screen facing
out.
- Manual focus returns to automatic focus (AF).
- Manual exposure adjustment returns to
automatic exposure.
- Zoom position returns to full wide angle W.
ꢀIn Quick-Start ready mode, the camcorder
consumes only half the power used while
recording. Using this mode you can save
energy when using a battery pack.
(
ꢀWhile the camcorder is in Quick-Start ready
mode (QUICK START button lit up):
- If you change the position of the
/
switch, the camcorder will shut off. To restore
the power, turn the camcorder off and then on
again.
- The camcorder will shut off if left in the Quick-
Start ready mode for 30 minutes, regardless of
the [POWER SAVE] setting (
the power, turn the camcorder off and then on
again.
- If you open the cassette compartment cover,
the camcorder will return to record pause mode.
1 Holding the lock button pressed
down, set the
PLAY.
switch to
2 Move the
(tape).
/
switch to
3 If the joystick guide does not
appear on screen, press ( ) to
display it.
4 Locate the point where you want to
begin the playback.
Push the joystick ( ) towards
rewind the tape or ( ) towards
to fast forward.
to
33
Playback
5 Push the joystick ( ) towards
to begin the playback.
/
NOTES
ꢀYou can display the date and time of the
DURING PLAYBACK
6 Push the joystick ( ) towards
ꢀDuring some special playback modes, you
may notice some video problems (blocky video
artifacts, banding, etc.) in the playback picture.
ꢀTo protect the tape and video heads, the
camcorder will enter the stop mode ( ) if left in
/
again to pause the playback.
7 Push the joystick ( ) towards
stop the playback.
to
TO ADJUST THE VOLUME
playback pause (
seconds. To resume the playback push the
joystick ( ) towards
) mode for 4 minutes 30
FUNC.
1 Press
.
/
.
2 Select (
) [
SPEAKER
VOLUME] and adjust (
volume.
) the
• The sound from the built-in speaker
will be muted when you close the LCD
panel or while the STV-250N Stereo
Video Cable is connected to the AV
terminal.
Returning to a Pre-marked Position
If you wish to return to a particular scene
later, mark the point with the zero set
memory and the tape will stop at that
point when you rewind/fast forward the
tape.
• If you turn off the volume completely,
the icon will change to
.
FUNC.
3 Press
to close the menu.
(
SPECIAL PLAYBACK MODES
To operate the special playback modes
use the buttons on the wireless controller.
There is no sound during the special
playback modes. To return to normal
playback, push the joystick ( ) towards
PLAY
1 While recording or during playback,
press on the
ZERO SET MEMORY
wireless controller at the point you
wish to return to later.
• The time code changes to
“0:00:00 ”.
• Press ZERO SET MEMORY again to
cancel the memory.
2 If you marked the zero memory
while recording, set the camcorder
/
or press
on the wireless
controller.
ꢀ
towards
Fast Playback: Push the joystick (
)
or ( ) towards
. Hold
the joystick pressed down to rewind/fast
forward the tape while continuing the
playback. You can also press and hold
to
mode. If you marked
the zero memory during playback,
REW
FF
or
controller.
on the wireless
press
.
3 Press
to locate the zero mark.
• If the tape counter shows a negative
ꢀ
Reverse Playback: During normal
playback press
.
number, press
instead.
ꢀ
Frame Reverse/Advance: During playback
•
appears and the camcorder
pause press
/
. Keep pressed
rewinds/fast forwards the tape.
• The tape stops at or near the zero
for continuous frame-by-frame playback.
ꢀ
Slow Playback: During normal or reverse
mark,
disappears and the correct
SLOW
playback press
.
time code will be displayed again.
ꢀ
Double Speed Playback: During normal or
reverse playback press
.
34
Playback
NOTES
Locating Scenes by Recording Date
If there are blank sections between recordings,
the zero set memory may not work correctly.
You can locate the change of the date/
time zone with the date search function.
Press
controller.
or
on the wireless
Locating the End of the Last Scene
• Press more than once to search for
further date changes (up to 10 times).
STOP
After playing back a tape, use this
function to locate the end of the last
scene recorded in order to continue
recording from that point.
• To cancel the search press
.
NOTES
POINTS TO CHECK
ꢀRecordings shorter than 1 minute per date/
time zone cannot be located with this function.
ꢀDate search may not function if the data code
is not correctly displayed.
Stop the playback before using this
function.
FUNC.
Playing Back Still Images and Movie
Clips from a Memory Card
FUNC.
1 Press
.
2 Select (
) [
).
END SEARCH] and
(
press (
3 Select (
) [EXECUTE] and press
(
).
• “END SEARCH” appears.
• The camcorder rewinds/fast forwards
the tape, plays back the last few
seconds of the recording and stops the
tape.
• To cancel the search push the
joystick ( ) towards
.
NOTES
ꢀEnd search cannot be used once you remove
the cassette.
ꢀIf there are blank sections between
recordings, the end search may not work
correctly.
1 Holding the lock button pressed
ꢀYou cannot use the end search to locate the
end of a scene that was audio dubbed.
down, set the
PLAY.
switch to
35
Playback
- Do not change the position of the
switch or the operating mode.
ꢀThe following may not be displayed correctly.
- Images not recorded with this camcorder.
- Images edited on or uploaded from a
/
2 Move the
/
switch to
(memory card).
T
O
VIEW STILL IMAGES
computer (except for the sample images for the
Card Mix function (
- Images whose file names have been
changed.
3 If the joystick guide does not appear
Image Jump
on screen, press (
4 Push the joystick (
between the images.
) to display it.
) to move
You can jump ahead to a specific image
without having to browse all images one
by one. With movie clips, you can only
start the image jump in stop mode (when
the first frame appears as a still image).
T
O
PLAY BACK MOVIE CLIPS
Push the joystick (
) and hold it
pressed down. Release the joystick
when the image number gets to the
image you want to display.
During
playback
5 Push the joystick ( ) towards
to begin the playback.
/
Slideshow
• Push the joystick ( ) towards
again to pause/resume the playback.
/
SLIDESHOW
• Push the joystick (
pressed towards
rewind/fast forward the movie clip. You
) and hold it
to
or
FUNC.
REW
can also press and hold
or
FF
on the wireless controller.
FUNC.
1 Press
.
• Push the joystick ( ) towards
stop the playback.
• When the movie playback ends or is
stopped, the first frame of the movie
appears as a still image.
to
2 Select (
) [ SLIDESHOW] and
).
press (
• The still images and movie clips on
the memory card are played back in
sequence.
• Press (
) to stop the slideshow.
IMPORTANT
Index Screen
ꢀAvoid the following actions while the card
1 Move the zoom lever toward W.
The index screen appears. Movies on
the memory card are marked with a
.
access display
appears on screen, and
when the CARD access indicator is on or
flashing. Failing to do so may result in
permanent data loss.
- Do not open the memory card slot cover and
do not remove the memory card.
- Do not disconnect the power source or turn off
the camcorder.
2 Select (
,
) an image.
to the image you
Move the cursor
want to view.
36
Playback
3 Move the zoom lever toward T.
The index screen closes and the
selected image is displayed.
IMPORTANT
ꢀMovie clips on the memory card cannot be
magnified.
ꢀWhile the magnification position frame is
displayed, it will replace the joystick guide.
Cancel the magnification to return to normal
playback of movies or still images.
Magnifying the Playback Image
During playback, movies and still images
can be magnified up to 5 times. You can
also select the area to be magnified.
(
1 Move the zoom lever toward T.
• The image is magnified by 2 times
and a frame appears indicating the
position of the magnified area.
• To further enlarge the image, move
the zoom lever toward T. To reduce the
magnification, move the zoom lever
toward W.
•
will appear for images that cannot
be enlarged.
2 Select (
,
) the enlarged area
of the picture with the joystick.
To cancel the magnification, move the
zoom lever toward W until the frame
disappears.
37
Menu Options Lists
(
Advanced Functions
Menu Options Lists
Digital effects
Menu Options Lists
Menu items not available appear grayed
out. For details about how to select an
Mode switch:
item, refer to Using the Menus (
[
D.EFFECT OFF], [ FADER],
[
EFFECT], [ CARD MIX]
FUNC. Menu
Mode switch:
D.EFFECT OFF], [ BLK&WHT]
(
Recording programs
[
Mode switch:
Mode switch:
[
[
[
[
PROGRAM AE],[ PORTRAIT],
SPORTS], [ NIGHT], [ SNOW],
BEACH], [ SUNSET],
[
D.EFFECT OFF], [ FADER],
EFFECT]
[
SPOTLIGHT], [ FIREWORKS]
(
Still image simultaneous recording
(
White balance
[
[
[
STILL I.REC OFF],
FINE/640x480],
NORMAL/640x480]
S
S
Mode switch:
[
AUTO], [ DAYLIGHT],
TUNGSTEN], [ SET]
[
(
Movie Clip Size
(
Image effect
[
MOVIE REC OFF],
[
320x240], [
160x120]
160x120]
Mode switch:
[
[
[
IMAGE EFFECT OFF], [ VIVID],
NEUTRAL],
SOFT SKIN DETAIL]
[
320x240], [
(
Led Light
[
LIGHT OFF], [
LIGHT ON]
38
Menu Options Lists
(
(
Still image size/quality
Still Image Protect
Size:
[
[
PROTECT OFF],
PROTECT ON]
[
[
L
L
1152x864],
1024x768],
Protect a still image on the memory card.
: This option will appear only
[
S
640x480]
FUNC.
when you press
within the time set
Quality:
[
[
for the [REVIEW] option (or immediately
after recording the still image, if set to
SUPER FINE], [ FINE],
NORMAL]
[
OFF]).
(
Still image capturing
(
PRINT ORDER
[
[
[
S
S
S
S.FINE/640x480],
FINE/640x480],
NORMAL/640x480]
[
0] - [ 99] COPIES
Set a print order for a still image on the
memory card.
(
SPEAKER VOLUME
(
Transfer Order
[
[
TRANS.ORDER OFF],
TRANS.ORDER ON]
Adjust (
) the volume with the joystick.
Set a transfer order for a still image on the
memory card.
(
REC PAUSE
Press (
mode.
) to enter the record pause
(
END SEARCH
Press (
) to search.
(
SLIDESHOW
Press (
) to start.
39
Menu Options Lists
ꢀWhen activated, the camcorder will
Setup menus
switch automatically to the digital zoom
when you zoom in beyond the optical
zoom range.
ꢀWith the digital zoom the image is
digitally processed, so the image
resolution will deteriorate the more you
zoom in.
Camera Setup (Digital Zoom, Image Stabilizer, etc.)
CAMERA SETUP
(
SHUTTER
ꢀThe digital zoom indicator will appear in
light blue from 35x up to 105x and dark
blue from 105x up to 1000x.
Mode switch:
Recording program: [ PROGRAM AE]
[
AUTO], [1/60], [1/100], [1/250],
ꢀThe digital zoom cannot be used with
[1/500], [1/1000] [1/2000]
the [
NIGHT] recording program.
ZOOM SPEED
Mode switch:
Recording program: [ PROGRAM AE]
[
AUTO], [1/60], [1/100], [1/250]
[
[
VARIABLE], [
SPEED 2], [
SPEED 3],
SPEED 1]
A.SL SHUTTER
ꢀWhen set to [
VARIABLE] the zoom
speed depends on how you operate the
zoom lever: Press lightly for a slow zoom;
press harder for faster zooms.
[
ON], [
OFF]
ꢀThe fastest zoom speed can be
The camcorder automatically uses slow
shutter speeds to obtain brighter
recordings in places with insufficient
lighting.
achieved with [
the fixed zoom speeds, [
the fastest and [
slowest.
VARIABLE]. Among
SPEED 3] is
SPEED 1] the
ꢀThe camcorder uses shutter speeds
down to 1/30 (1/15 in
ꢀIf a trailing afterimage appears, set the
slow shutter to [ OFF].
ꢀIf (camcorder shake warning)
appears, we recommend stabilizing the
camcorder, for example, by mounting it
on a tripod.
mode).
(
FOCUS PRI.
Mode switch:
[
[
ON:AiAF], [
OFF]
ON:CENTER],
REVIEW
D.ZOOM
[
[
OFF], [
6sec], [
2sec], [
8sec], [
4sec],
10sec]
[
OFF], [
105X], [
1000X]
Determines the operation of the digital
zoom.
Selects the time to display a still image
after it has been recorded.
40
Menu Options Lists
ꢀYou can erase (
back on a TV with normal aspect ratio
(4:3) change the [TV TYPE] setting
FUNC.
(
while you are reviewing the image (or
immediately after recording it, if set to
accordingly (
(
[
OFF]).
SELF TIMER
IMG STAB
[
ON], [
OFF]
VCR Setup (Recording Mode, TV Type, etc.)
Mode switch:
ON], [
The image stabilizer compensates for
camcorder shake even at full telephoto.
ꢀThe image stabilizer is designed to
compensate for a normal degree of
camcorder shake.
ꢀThe image stabilizer may not be
effective when recording in dark places
using the [
ꢀThe image stabilizer cannot be turned
off when the mode switch is set to
ꢀWe recommend setting the image
stabilizer to [
tripod.
VCR SETUP
REC MODE
[
OFF]
[
STD PLAY], [
LONG PLAY]
ꢀRecording in LP mode extends the
available recording time on the tape 1.5
times.
NIGHT] recording program.
ꢀDepending on the condition of the tape
(long usage, imperfections, etc.) you may
notice some video problems (blocky video
artifacts, banding, etc.) in the playback
picture when playing back recordings
made in LP mode. We recommend using
the SP mode for important recordings.
ꢀAudio cannot be dubbed on tapes
recorded in LP mode.
.
OFF] when using a
WIDESCREEN
ꢀIf you make recordings in both SP and
LP modes on the same tape, during
playback you may notice some video
problems in the picture at the point where
the recording mode changes.
[
ON], [
OFF]
The camcorder uses the full width of the
CCD providing high-resolution 16:9
recording.
ꢀWhen playing back in this camcorder
tapes recorded in LP mode with other
devices or vice versa, you may notice
some problems in the playback picture or
the sound may stop briefly.
ꢀSince the displays on the camcorder
have an aspect ratio of 16:9, recordings
with a 4:3 aspect ratio will appear in the
center of the screen with black sidebars.
ꢀA still image cannot be simultaneously
recorded on the memory card while
recording movies in widescreen (16:9)
mode.
TV TYPE
ꢀ
Playing back a widescreen recording: TV
sets compatible with the Video ID-1
system will automatically switch to wide
(16:9) mode. Otherwise, change the
aspect ratio of the TV manually. To play
[
NORMAL TV], [
WIDE TV]
In order to display the picture in full and in
the correct aspect ratio, select the setting
41
Menu Options Lists
(
according to the type of television to
which you will connect the camcorder.
[NORMAL TV]: TV sets with 4:3 aspect
ratio.
MIX BALANCE
[WIDE TV]: TV sets with 16:9 aspect
ratio.
When [12bit AUDIO] is set to [
MIX/
VAR.], adjust (
) the sound balance
Audio Setup (Audio Mode, Wind Screen, etc.)
with the joystick.
AUDIO SETUP
ꢀThe camcorder will retain the audio
balance adjustment, however if you turn
off the camcorder, [12bit AUDIO] will be
(
OUTPUT CH
reset to [
STEREO1].
AUDIO MODE
[
L/R], [
L/L], [
R/R]
(
(
AUDIO DUB.
[
16bit], [
12bit]
Card Operations (Initialization, Erase All Images, etc.)
CARD OPERATIONS
PRINT ORD.ALL ERASE
[
AUDIO IN], [
MIC.IN]
(
(
(
(
WIND SCREEN
*
[NO], [YES]
*
:
only when dubbing
audio with the built-in microphone.
Mode switch:
[
The camcorder automatically reduces the
background sound of wind when
recording outdoors.
ꢀThe wind screen cannot be turned off
when the mode switch is set to
TRANS.ORD.ALL ERASE
AUTO], [
OFF
]
[NO], [YES]
ERASE ALL IMAGES
.
(
12bit AUDIO
[NO], [YES]
INITIALIZE
[
[
STEREO1], [
MIX/FIXED], [
STEREO2],
MIX/VAR.]
[NO], [YES]
42
Menu Options Lists
* The following options are available only
TV SCREEN
ON], [
FUNC.
when you press
screen.
in the index
(
PROTECT*
[
OFF]
Press (
) to protect the image.
[
ON], [
When set to [
OFF]
ON], the camcorder’s
(
PRINT ORDER*
on-screen displays will appear also on the
screen of a connected TV or monitor.
When the date and time are displayed on
the camcorder’s screen they will also
appear on a connected TV regardless of
the [TV SCREEN] setting. Turn off the
date/time display with the [DATA CODE]
Press (
) to set the print order.
(
TRANSFER ORDER*
setting (
Press (
) to set the transfer order.
MARKERS
Display Setup (LCD Brightness, Language, etc.)
DISPLAY SETUP
BRIGHTNESS
[
[
[
OFF], [
LEVEL(GRY)], [
GRID(GRY)]
LEVEL(WHT)],
GRID(WHT)],
You can display a grid or a horizontal line
at the center of the screen. The markers
are available in white or gray. Use the
markers as a reference to make sure your
subject is framed correctly (vertically and/
or horizontally).
Adjust (
display with the joystick.
ꢀChanging the brightness of the LCD
display does not affect that of the
viewfinder or the recordings.
) the brightness of the LCD
ꢀUsing the markers will not affect the
recordings on the tape or memory card.
(
BACKLIGHT
DISPLAYS
[
NORMAL]*, [
BRIGHT]
BRIGHT]
[
ON], [
OFF<PLAYBK>]
* The default setting is [
You can hide the on-screen displays to
show only the playback picture on the full
screen.
when you power the camcorder using the
compact power adapter.
ꢀTape operation displays appear for 2
seconds.
43
Menu Options Lists
ꢀWarning messages, the data code (if
activated), and displays on the index
screen will appear regardless of the
setting.
ꢀAll on-screen displays will appear while
the playback image is magnified or a
digital effect is activated.
automatically when the camcorder is
powered with the power adapter if you
leave it turned on without loading a
recording media for more than 5 minutes.
ꢀTo cancel the demo mode once it
started, press any button, turn off the
camcorder or insert a videocassette.
System Setup (Beep, etc.)
6SEC.DATE
SYSTEM SETUP
WL.REMOTE
[
ON], [
OFF]
When you start playing back a tape or
when the date of the recording changes,
the date and time will be displayed for 6
seconds.
[
ON], [
OFF
]
Allows the camcorder to be operated with
the wireless controller.
(
DATA CODE
BEEP
[
[
OFF], [ DATE], [ TIME],
DATE & TIME]
[
[
HIGH VOLUME],
LOW VOLUME], [
OFF]
A beep will accompany some operations
like turning on the camcorder, the self-
timer countdown, etc. It also serves as a
warning beep under unusual conditions.
(
LANGUAGE
The list of available languages depends
on the region where you purchased the
camcorder.
POWER SAVE
Language Set A:
[DEUTSCH], [ENGLISH], [ESPAÑOL],
[FRANÇAIS], [ITALIANO], [POLSKI],
[
ON], [
OFF]
In order to save power when the
[
], [
], [
]
camcorder is powered by a battery pack,
it will automatically shut off if left without
any operation for five minutes.
Language Set B:
[ENGLISH], [
], [
], [
]
Approximately 30 seconds before the
camcorder shuts off, the message
DEMO MODE
“
AUTO POWER OFF” will appear.
[
ON], [
OFF]
The demonstration mode displays the
camcorder’s main features. It starts
44
Menu Options Lists
Date/Time Setup
FILE NOS.
DATE/TIME SETUP
[
RESET], [
CONTINUOUS]
(
(
T.ZONE/DST
DATE/TIME
Select the image numbering method to be
used when you insert a new memory
card.
Images are automatically assigned
consecutive image numbers from 0101 to
9900, and stored in folders containing up
to 100 images. Folders are numbered
from 101 to 998.
DATE FORMAT
[Y.M.D (2007.1.1 AM 12:00)],
[M.D,Y (JAN. 1, 2007 12:00 AM)],
[D.M.Y (1.JAN.2007 12:00 AM)]
Changes the date format for on-screen
displays and for date printing.
[
RESET]: Image numbers will restart
from 101-0101 every time you insert a
new memory card.
[
CONTINUOUS]: Image numbers will
continue from the number following that
of the last image recorded with the
camcorder.
ꢀIf the memory card you insert already
contains an image with a larger number, a
new image will be assigned a number one
higher than that of the last image on the
memory card.
ꢀWe recommend using the
[
CONTINUOUS] setting.
FIRMWARE
You can verify the current version of the
camcorder’s firmware. This menu option
is usually grayed out.
45
Recording Programs
Recording Programs
Using the Recording Programs
Easy Recording
The camcorder adjusts the focus,
exposure and other settings
automatically, allowing you to just
point and shoot.
:
Recording Programs (
[
PROGRAM AE]
[
NIGHT]
[
SUNSET]
The camcorder sets the
Use this mode to record
Use this mode to record
sunsets in vibrant colors.
aperture and shutter speed. in low-light conditions.
[
PORTRAIT]
[
SNOW]
[
SPOTLIGHT]
The camcorder uses a
Use this mode to record
Use this mode to record
spotlit scenes.
large aperture, achieving a in bright ski resorts. It
focus on the subject while
blurring other distracting
details.
prevents the subject from
being underexposed.
[
SPORTS]
[
BEACH]
[
FIREWORKS]
Use this mode to record
sports scenes such as
tennis or golf.
Use this mode to record
on a sunny beach. It
Use this mode to record
fireworks.
prevents the subject from
being underexposed.
46
Recording Programs
Shutter speed guidelines
: Changing the Shutter Speed and
Special Scene Programs
1/60
1/60
Use the automatic exposure (AE)
program to set the shutter speed or select
one of the special scene recording
programs.
For general recordings.
1/100
1/100
For recording indoor sports scenes.
POINTS TO CHECK
1/250, 1/500, 1/1000
1/250
(
For recording from within a car or train, or
for recording moving subjects such as
roller coasters.
Mode switch:
1/2000
For recording outdoor sports such as golf
or tennis on sunny days.
FUNC.
Note that on screen only the denominator
is displayed – “ 250” indicates a shutter
speed of 1/250, etc.
Icon of the currently selected
Recording Program
FUNC.
NOTES
FUNC.
Desired option
ꢀDo not change the position of the mode
switch while recording as the brightness of the
image may change abruptly.
TO SET THE SHUTTER SPEED IN THE
[
PROGRAM AE] RECORDING PROGRAM
ꢀ[ PROGRAM AE]
- When setting the shutter speed, the number
displayed will flash if the value selected is not
appropriate for the recording conditions. In such
case, select a different value.
- If you use a slow shutter speed in dark places,
you can obtain a brighter image, but the image
quality may be lower, and the autofocus may
not work well.
FUNC.
MENU
CAMERA SETUP
SHUTTER
- The image may flicker when recording with
high shutter speeds.
FUNC.
Desired option
-
Recording movies under fluorescent lights: If the
screen starts to flicker, select [ PROGRAM
AE] and set the shutter speed to 1/100.
- The shutter speed resets to [
you set the mode switch to
recording program.
AUTO] when
or change the
ꢀ[
[
PORTRAIT]/[
SNOW]
SPORTS]/[
BEACH]/
- The picture may not appear smooth during
playback.
47
Adjusting the Picture: Exposure, Focus and Color
Adjusting the Picture: Exposure, Focus and Color
ꢀ[ PORTRAIT]
- The blur effect of the background increases
the more you zoom in ( ).
ꢀ[ NIGHT]
- Moving subjects may leave a trailing
afterimage.
- Picture quality may not be as good as in other
modes.
- White points may appear on the screen.
- Autofocus may not work as well as in other
modes. In such case, adjust the focus manually.
Adjusting the Picture:
T
Exposure, Focus and Color
Manual Exposure Adjustment
At times, backlit subjects may appear too
dark (underexposed) or subjects under
very strong lights may appear too bright
or glaring (overexposed). To correct this,
you can manually adjust the exposure.
ꢀ[ SNOW]/[ BEACH]
- The subject may become overexposed on
cloudy days or in shaded places. Check the
image on the screen.
POINTS TO CHECK
ꢀ[ FIREWORKS]
- To avoid camcorder shake, we recommend
using a tripod. Make sure to use a tripod
especially in
slows down.
(
Mode switch:
[
(except for the
, as the shutter speed
FIREWORKS] recording program).
EXP
BACK
1 If the joystick guide does not appear
on screen, press ( ) to display it.
2 Push the joystick ( ) towards
[EXP].
• [EXP] on the joystick guide changes
to light blue and the exposure
adjustment indicator
and the
neutral value “±0” appear on the
screen.
• If you operate the zoom during
exposure lock, the brightness of the
image may change.
3 Adjust (
) the brightness of the
image as required.
• The adjustment range and the length
of the exposure adjustment indicator
will vary depending on the initial
brightness of the picture.
• Pushing the joystick ( ) towards
[EXP] again will return the camcorder
to automatic exposure.
4
Push the joystick ( ) towards
[BACK] to save the exposure setting.
48
Adjusting the Picture: Exposure, Focus and Color
• Push the joystick ( ) towards
a farther focal distance or push it (
for
)
Manual Focus Adjustment
towards
for a closer focal distance.
Autofocus may not work well on the
following subjects. In such case, focus
manually.
• Pushing the joystick ( ) towards
[FOCUS] again will return the
camcorder to autofocus.
Reflective surfaces
5 Push the joystick ( ) towards
[BACK] to save the focus
adjustment.
Subjects with low contrast or
without vertical lines
NOTES
The camcorder will automatically return to
autofocus when you set the mode switch to
Fast moving subjects
.
Infinity Focus
Use this function when you wish to focus
on faraway subjects such as mountains or
fireworks.
Through wet windows
Night scenes
BACK
FOCUS
POINTS TO CHECK
1 Adjust the zoom.
2 Keep the joystick pushed (
)
(
towards [FOCUS] for more than 2
seconds.
Mode switch:
•
appears.
• Pushing the joystick ( ) towards
[FOCUS] again will return the
camcorder to autofocus.
BACK
FOCUS
• Operating the zoom or the joystick
(
) will return the camcorder to
1 Adjust the zoom.
manual focus adjustment.
3 Push the joystick ( ) towards
[BACK] to save the focus
adjustment.
2 If the joystick guide does not appear
on screen, press (
) to display it.
3 Push the joystick ( ) towards
[FOCUS] to activate the manual
focus.
[FOCUS] on the joystick guide will be
displayed in light blue and “MF”
appears on the screen.
4 Adjust (
necessary.
) the focus as
49
Adjusting the Picture: Exposure, Focus and Color
TO SET THE CUSTOM WHITE BALANCE
White Balance
1 Point the camcorder at a white
The white balance function helps you
accurately reproduce colors under
different lighting conditions so that white
objects will always look truly white in your
recordings.
object, zoom in until it fills the
whole screen and press (
When the adjustment is completed,
).
stops flashing and stays on. The
camcorder retains the custom setting
even if you turn off the camcorder.
FUNC.
POINTS TO CHECK
2 Press
to save the setting and
close the menu.
(
NOTES
Mode switch:
ꢀWhen you select the custom white balance
Options
Default value
[
SET]:
- Make the white balance adjustment in a place
with sufficient light.
[
AUTO]
Settings are automatically set by the
camcorder. Use this setting for outdoor
scenes.
- Set [D.ZOOM] to [
OFF] (
- Readjust the white balance if the lighting
conditions change.
- Very rarely and depending on the light source,
may keep on flashing instead of staying on.
Even in that case, the white balance would be
properly adjusted and the results should be
[
DAYLIGHT]
For recording outdoors on a bright day.
TUNGSTEN]
[
better than with [
AUTO].
For recording under tungsten and tungsten
type (3-wavelength) fluorescent lighting.
ꢀCustom white balance may provide better
results in the following cases:
- Changing lighting conditions
- Close-ups
[
SET]
Use the custom white balance for special
situations not covered by the other options.
The custom white balance will ensure that
white subjects appear white under various
lighting conditions.
- Subjects in a single color (sky, sea or forest)
- Under mercury lamps and certain types of
fluorescent lights
FUNC.
Icon of the currently selected
White Balance
FUNC.
FUNC.
Desired option*
* When you select [ SET], do not press
FUNC.
and continue instead with the
procedure below.
50
Audio Recording and Playback
Audio Recording and Playback
Audio Recording and
Image Effects
You can use the image effects to change
the color saturation and contrast to obtain
different results.
Playback
Audio Recording Mode
You can change the quality of the audio
recording.
POINTS TO CHECK
(
POINTS TO CHECK
Mode switch:
(
Options
Default value
Options
[
IMAGE EFFECT OFF]
Records with no image enhancing effects.
VIVID]
Default value
[
16bit]
[
Records audio at the highest quality.
Emphasizes the contrast and color
saturation.
[
12bit]
Records audio on 2 channels (Stereo 1)
leaving 2 channels free (Stereo 2) for
audio dubbing or for adding a sound
track later.
[
NEUTRAL]
Tones down the contrast and color
saturation.
[
SOFT SKIN DETAIL]
Softens the details in the skin tone area for
a more complimentary appearance.
FUNC.
FUNC.
MENU
FUNC.
AUDIO SETUP
AUDIO MODE
Desired option
Icon of the currently selected
Image Effect
FUNC.
FUNC.
Desired option
FUNC.
ABOUT THE WIND SCREEN
The camcorder automatically reduces the
background sound of wind, but you can
turn the wind screen off when you want
the microphone to be as sensitive as
possible (
51
Audio Recording and Playback
POINTS TO CHECK
Audio Playback Modes
Selecting the Audio Channel
(
You can select the audio channel to play
back when playing back a tape with audio
recorded on two channels (either stereo
sound or bilingual audio signals).
Options
Default value
[
STEREO1]
Original sound only.
STEREO2]
Dubbed audio only.
MIX/FIXED]
POINTS TO CHECK
[
(
[
Options
Default value
Mixed audio with the original sound and
the dubbed audio at the same level.
[
L/R]
[
MIX/VAR.]
Mixed audio where the balance between
the original sound ( ) and the dubbed
) can be adjusted.
Left and Right channels (stereo) / Main +
Sub signals (bilingual).
[
L/L]
audio (
Left channel only (stereo) / Main signal
only (bilingual).
FUNC.
[
R/R]
Right channel only (stereo) / Sub signal
only (bilingual).
FUNC.
MENU
FUNC.
AUDIO SETUP
12bit AUDIO
FUNC.
MENU
FUNC.
Desired option*
AUDIO SETUP
OUTPUT CH
Desired option
* When you select [
mix balance with the [MIX BALANCE] setting
MIX/VAR.], adjust the
(
FUNC.
Selecting the Audio Track on a Tape with
Dubbed Audio
You can select the audio track to play
back when playing back a tape that has a
dubbed audio track (Stereo 2) in addition
to the original recorded audio (Stereo 1).
52
Recording Options using the Memory Card
Recording Options using the Memory Card
On a 512 MB memory card
Recording Options using the
Image Size
Memory Card
735
885
1,115 2,155
1,310 2,515
L
1152x864
Selecting the Size and Quality of Still
Images
Still images are recorded on the memory
card using the JPEG (Joint Photographic
Experts Group) compression. As a
general rule select a larger image size for
higher quality.
L
S
1024x768
640x480
2,320 3,355 6,040
Default value with the
1152x864/FINE
L
FUNC.
(
Options
Approximate number of still images that
can be recorded on different sizes of
memory cards with the following quality
settings:
Icon of the currently selected
Image Quality/Size
FUNC.
Desired image size*
Press
: [SUPER FINE], : [FINE],
: [NORMAL].
On a 32 MB memory card
Image Size
FUNC.
Desired image quality*
40
50
65
75
130
150
365
* The number displayed on the right corner
indicates the approximate number of images
that can be recorded with the current quality/
size setting.
L
1152x864
L
S
1024x768
640x480
140
200
NOTES
On a 128 MB memory card
ꢀDepending on the number of images on the
memory card (Windows: more than 1,800
images; Macintosh: more than 1,000 images),
you may not be able to download images to a
computer. Try using a card reader.
ꢀConnection to a PictBridge compatible printer
will not work when the memory card contains
more than 1,800 images. For best performance,
we recommend to keep the number of images
on the memory card under 100.
Image Size
185
220
585
280
330
850
545
635
L
1152x864
L
S
1024x768
640x480
1,530
53
Recording Options using the Memory Card
Selecting the Size of Movie Clips on the
Memory Card
Capturing a Still Image while Recording
Movies
Movies are recorded on the memory card
While you are recording a movie on the
using the Motion-JPEG compression. The tape you can simultaneously capture the
sound for these movie clips is monaural.
same picture as a still image on the
memory card without interrupting your
recording to change modes. The size of
(
the still image will be
S
640x480 and
Options
cannot be changed but the quality of the
still image can be selected.
Approximate recording time available on
different sizes of memory cards.
[
320x240]
POINTS TO CHECK
File Size per Second: Approx. 250 KB.
(
Memory Card
32 MB
Recording Time
2 min.
Select the size and quality of the still
image in record pause mode before you
start recording.
128 MB
8 min.
512 MB
33 min.
Default value
[
160x120]
File Size per Second: Approx. 120 KB.
STILL I.REC OFF
Memory Card
32 MB
Recording Time
4 min.
FUNC.
128 MB
18 min.
512 MB
70 min.
Default value
Icon of the currently selected
Still Image Simultaneous
Recording option
FUNC.
MOVIE REC OFF
* In
[
mode, the default is
320x240].
FUNC.
Desired image quality*
* The number displayed on the right corner
indicates the approximate number of images
that can be recorded with the current quality/
size setting.
FUNC.
Icon of the currently selected
Movie Size
TO CAPTURE THE STILL IMAGE
While you are recording a movie,
FUNC.
PHOTO
press
.
FUNC.
Desired option
The still image is recorded on the memory
card while the screen continues to show
the video recording.
54
Recording Options using the Memory Card
NOTES
NOTES
ꢀThe still image cannot be recorded on the
memory card while recording in widescreen
The data code of the captured still image/movie
clip will reflect the date and time when it was
(16:9) mode or while a digital effect is activated. recorded on the memory card.
ꢀTo record still images we recommend using
the
mode, which offers the best
quality for still images.
Automatic Focus Priority
When the focus priority is activated, the
camcorder records a still image only after
the focus has been adjusted
Capturing a Still Image or Movie Clip
from the Playback Picture
automatically. When the mode switch is
While you are playing back a tape you
can capture the picture as a still image or
as a movie clip on the memory card. The
set to
, you can also select the AF
(autofocus) frame.
.
size of the still image will be [
and cannot be changed.
Select the quality of the still image with
the procedure below. Refer to Selecting
the Size of Movie Clips on the Memory
S
640x480]
(
Options
Default value
[
ON:AiAF]
(Mode switch:
*,
)
Card (
Depending on the shooting conditions, one
or more AF frames out of the nine frames
available are automatically selected and
the focus is fixed on them.
movie clip.
(
[
ON:CENTER]
FUNC.
(Mode switch: *)
A single focusing frame appears in the
center of the screen and the focus is
automatically fixed on the center AF frame.
This is convenient for making sure the
focus is exactly where you want it.
Icon of the currently selected
Still Image Capturing option
FUNC.
FUNC.
Desired image quality
[
OFF]
(Mode switch:
)
Select this option if you wish to record a
TO CAPTURE A STILL IMAGE
PHOTO
still image as soon as you press
The focus priority cannot be turned off
when the mode switch is set to
.
During playback or in playback pause
PHOTO
mode, press
.
.
TO CAPTURE A MOVIE CLIP
During Playback or in playback pause
* Except for the [ FIREWORKS] recording
program.
Start/Stop
mode, press
.
Start/Stop
Press
again to stop the
recording.
55
Other Functions
Other Functions
Other Functions
FUNC.
Data Code
The camcorder keeps a data code
FUNC.
MENU
containing the date and time of recording.
You can select the data to be displayed.
CAMERA SETUP
FOCUS PRI.
Options
Default value
FUNC.
Desired option
[
OFF]
No data code display.
DATE], [ TIME]
NOTES
[
ꢀIn the [
FIREWORKS] recording program
the focus priority is automatically set to
OFF].
Displays the date or time when the scene
or still image was recorded.
[
[
DATE & TIME]
Displays both the date and time of the
recording.
FUNC.
FUNC.
MENU
DISPLAY SETUP/
DATA CODE
FUNC.
Desired option
56
Other Functions
•
appears.
LED Light
You can turn on the LED light (assist
lamp) at any time, regardless of the
recording program.
• Set [SELF TIMER] to [
cancel the self timer.
OFF] to
:
Start/Stop
Press
.
The camcorder starts recording after a
10-second countdown*. The countdown
appears on the screen.
(
FUNC.
:
PHOTO
Press
to record the still image.
The camcorder will record the still image
after a 10-second countdown*. The
countdown appears on the screen.
*2 seconds when using the wireless
controller.
Icon of the LED light
LIGHT OFF
FUNC.
FUNC.
LIGHT ON
•
appears on the screen.
NOTES
• Select [
LIGHT OFF] to turn the
LED light off.
Once the countdown has begun, you can also
Start/Stop
press
press
(when recording movies) or
fully (when recording still
PHOTO
images) to cancel the self timer. The self timer
will also be canceled if you turn off the
camcorder.
Self Timer
POINTS TO CHECK
(
: Set the camcorder in record
pause mode.
Digital Effects
[
FADER] Faders
Begin or end scenes with a fade to or
from black. You can preview the effect on
the display.
FUNC.
[FADE-T]
(fade trigger)
[WIPE]
[JUMP]
FUNC.
MENU
CAMERA SETUP
SELF TIMER
ON
[CORNER]
(corner wipe)
[FLIP]
[PUZZLE]
[BEAM]
[ZIGZAG]
[TIDE]
FUNC.
57
Other Functions
[
EFFECT] Effects
Setting
Add flavor to your recordings. Sound will
be recorded normally. You can preview
the effect on the display.
Icon of the currently selected
Digital Effect
FUNC.
[BLK&WHT]
(black and white)
[SEPIA]
FADER
or
[ART]
[MOSAIC]
[CUBE]
EFFECT
[BALL]
[WAVE]
[COLOR M.]
(color mask)
FUNC.
**
Desired fader/effect*
[MIRROR]
* You can preview the effect on the screen
before pressing ( ).
** The icon of the selected effect appears.
[
CARD MIX] Card Mix (
Combines a still image from the memory
card with your recording.
Applying
Selecting a Fader / Effect
POINTS TO CHECK
(
Mode switch:
: [ BLK&WHT] only.
Default value
D.EFFECT OFF
D.EFFECTS
1 Press
to activate the
fader/effect.
• The icon of the selected effect turns
green.
FUNC.
D.EFFECTS
• Press
again to deactivate
the fader/effect.
T
O
FADE
IN
D.EFFECTS
Press
...
: ...in record pause mode, then
Start/Stop
press
to start recording with a
fade in.
: ...in playback pause mode,
then push the joystick ( ) towards
to fade in and start the playback.
/
58
Other Functions
T
O
FADE OUT
D.EFFECTS
Press
...
: ...while recording, then press
Start/Stop
to fade out and pause the
recording.
: ...during playback, then push
the joystick ( ) towards
and pause the playback.
/
to fade out
POINTS TO CHECK
(
T
O
ACTIVATE AN EFFECT
D.EFFECTS
Press
...
Upload to the memory card a sample
image from the supplied DIGITAL VIDEO
SOLUTION DISK software CD-ROM.
Refer to Adding Still Images from your
Computer to the Memory Card in the
electronic instruction manual (PDF file)
included on the same CD-ROM.
: ...while recording or in record
pause mode.
: ...during playback.
: ...and then press
to
PHOTO
record the still image in black and white.
Mode switch:
NOTES
Default value
ꢀWhen you are not using the digital effect,
select [ D.EFFECT OFF].
ꢀThe camcorder retains the setting last used
even if you turn off the digital effects or change
the recording program.
ꢀThe digital effects are not available when [TV
TYPE] is set to [NORMAL TV] and the stereo
video cable is connected to the AV terminal.
D.EFFECT OFF
FUNC.
Setting
Icon of the currently selected
Digital Effect
FUNC.
Combining Images (Card Mix)
You can choose one of the sample
images (including picture frames and
backgrounds) from the collection on the
supplied DIGITAL VIDEO SOLUTION
DISK and combine it with your live video
recording to add a note of playfulness to
your movies.
CARD MIX
TO SET THE CARD MIX
1 Select (
) [IMAGE SELECT] and
) the still image
then select (
you want to combine.
The card mix combines illustrations or
titles with your recordings. The live video
recording will appear instead of the light
area of the card mix image.
Mix level adjustment: Light area of the still
image.
2 If you want to adjust the mix level,
select (
) [MIX LEVEL] and set
(
) the level preferred.
3 Press ( ) to save the settings and
press to close the menu.
FUNC.
appears.
59
Other Functions
Applying
D.EFFECTS
Press
.
•
changes to green and the
combined image appears.
• Still images cannot be recorded on
the memory card while the Card Mix
function is activated.
60
Still Image Options
Editing Functions
Still Image Options
FUNC.
Still Image Options
Erasing Still Images
While reviewing the image immediately
after recording:
IMPORTANT
FUNC.
IMAGE ERASE
Be careful when erasing images. Erased
images cannot be recovered.
FUNC.
ERASE
NOTES
Erasing All Images
ꢀProtected images cannot be erased.
ꢀMovie clips on the memory card can only be
erased when the first scene is displayed as a
still image (not during playback).
(
FUNC.
Erasing a Single Image
(
FUNC.
MENU
CARD OPERATIONS
ERASE ALL IMAGES
YES
1 If the joystick guide does not appear
on screen, press (
) to display it.
FUNC.
2 Select (
erase.
) the image you want to
3 Push the joystick ( ) towards
to erase the image.
4 Select (
).
) [ERASE] and press
(
Erasing a Single Image Just After
Recording
(
You can erase the last recorded still
image while reviewing it within the time
set for the [REVIEW] option (or
immediately after recording it, if
[REVIEW] is set to [
OFF]).
61
Still Image Options
Protecting a Single Image Just After
Recording
Protecting Still Images
You can protect still images from
accidental erasure.
You can protect the last recorded still
IMPORTANT
image while reviewing it within the time
set for the [REVIEW] option (or
immediately after recording it, if
Initializing the memory card (
permanently erase all recorded still images,
even the protected ones.
[REVIEW] is set to [
OFF]).
NOTES
FUNC.
Movie clips on the memory card can only be
protected when the first scene is displayed as a
still image (not during playback).
FUNC.
PROTECT OFF
PROTECT ON*
Protecting a Single Image
FUNC.
appears and the image cannot be
erased.
(
* To cancel the image protection, select
[PROTECT OFF] instead.
FUNC.
FUNC.
FUNC.
PROTECT OFF
PROTECT ON*
appears and the image cannot be
erased.
* To cancel the image protection, select
[PROTECT OFF] instead.
62
Still Image Options
Protecting Still Images from the Index
Screen
Initializing the Memory Card
Initialize new memory cards when you use
them for the first time. You may also have
to initialize a card if you get the “CARD
ERROR” message or you may choose to
do so to erase all data recorded on it.
(
Move the zoom lever toward
the still image index screen.
W
to enter
FUNC.
IMPORTANT
ꢀInitializing the memory card will erase all still
images and movie clips, even the protected
ones. The original image files cannot be
recovered.
ꢀInitialize all memory cards before using them
with this camcorder.
FUNC.
CARD OPERATIONS
PROTECT
Bring (
to the image you want to
protect and press ( ).*
,
) the cursor
(
FUNC.
**
Repeat this step to protect
additional images.
FUNC.
*
appears on protected images. Press
) again to cancel the protection.
(
FUNC.
MENU
CARD OPERATIONS
INITIALIZE
**After closing the menu the camcorder returns
to the index screen.
YES
YES
FUNC.
63
Connecting to a TV or VCR
External Connections
Connecting to
a
TV or VCR
Connecting to a TV or VCR
Connection Diagrams
Turn off all the devices when making the connections and refer also to the instruction
manual of the connected device.
AV Terminal
DV Terminal
Check the type and orientation
of the terminal and make sure
you connect the DV cable
properly.
Open the terminal
cover to access.
Terminal on the Connected
Terminal on the Camcorder
Connecting Cable
Device
1
Output connection (Signal Flow ) to a TV or VCR with AV Terminals.
Input connection (Audio only, Signal flow ) from an analog source for audio
dubbing.
VIDEO
Yellow
AUDIO
L
White
STV-250N Stereo Video Cable
(Supplied)
Red
R
2
Output connection (Signal Flow ) to an HDTV with a DV (IEEE1394) terminal.
Input connection (Signal Flow ) from a TV or other digital video source with a DV
(IEEE1394) output.
4-pin
DV Cable
(Commercially available)
6-pin*
* Be careful to correctly insert the 6-pin plug into the DV terminal. Inserting it in the wrong direction
can result in damage to the camcorder.
64
Connecting to a TV or VCR
virtually no generation loss in video and
sound quality.
Playback on a TV Screen
Connect the camcorder to the external
device following one of the connection
diagrams shown in the previous section
The quality of the playback picture will
vary depending on the connected TV and
the type of connection used.
Connection Diagrams (
(
(
Before making the connections, select the
[TV TYPE] setting according to the TV set
to which you will connect the camcorder
Connecting
Connect the camcorder to a VCR or other
analog device using connection type
or to a DVD recorder or other digital
recording device using connection type
(
1
,
Connecting
Connect the camcorder to the TV
2
, as shown in the previous section
following one of the connection diagrams
shown in the previous section Connection
Connection Diagrams ( 63).
Recording
Diagrams (
1 This camcorder: Load the recorded
cassette.
Playback
1 Turn on the camcorder and the
connected TV or VCR.
2 Connected device: Load a blank
cassette or disc and set the device
to record pause mode.
3 This camcorder: Locate the scene
you wish to copy and pause the
playback shortly before the scene.
4 This camcorder: Resume the movie
playback.
On a TV: Set the input selector to
VIDEO. On a VCR: Set the input
selector to LINE (IN).
2 Start the playback of the movies
(
When using an analog connection you
can include in the copy also the date/
time of the original recording ( 55).
5 Connected device: Begin recording
when the scene you wish to copy
appears. Stop recording when
copying is complete.
NOTES
ꢀTurn off all the devices before starting the
connections.
ꢀWe recommend powering the camcorder
using the compact power adapter.
6 This camcorder: Stop playback.
Recording to a VCR or Digital Video
Recorder
NOTES
ꢀWe recommend powering the camcorder
using the compact power adapter.
ꢀWhen recording to a VCR using an analog
connection –connection type
quality of the edited tape will be lower than the
original.
You can copy your recordings by
connecting the camcorder to a VCR or a
digital video device. When recording to a
digital video recorder using the DV
terminal, you can copy recordings with
1
(
65
Connecting to a TV or VCR
ꢀWhen recording to a digital video recorder
2
using the DV terminal –connection type
(
- If the picture does not appear, disconnect the
DV cable and restore the connection after a
short while or turn the camcorder off and then
on again.
- Proper operation cannot be guaranteed for all
digital devices equipped with a DV terminal. If
the operation does not work, use the AV
terminal.
6 When the scene you wish to record
appears, push the joystick (
towards to begin recording.
)
/
Recording starts.
7 While recording, push the joystick
(
) towards
recording.
In record pause, push the joystick (
/
to pause the
)
towards
recording.
/
again to resume
Digital Video Dubbing
You can input video from other digital
video devices and record the input video
on the tape in the camcorder.
8 Push the joystick ( ) towards
stop recording.
9 Connected device: Stop the
playback.
to
(
IMPORTANT
Connecting
Connect the camcorder to the video input
source using the digital connection
–connection type
the previous section Connection
Diagrams.
ꢀBlank sections may be recorded as
anomalous picture.
ꢀIf the picture does not appear, disconnect the
DV cable and restore the connection after a
short while or turn the camcorder off and then
on again.
2
(
ꢀDo not connect any devices to the
camcorder’s USB terminal while an external
device is connected to the DV terminal.
ꢀYou can only record video signals in DV
standard (standard definition, SP or LP mode)
Dubbing
FUNC.
from devices carrying the
logo. Note that
signals from identically shaped DV (IEEE1394)
terminals may be in different video standards.
1 Load a blank cassette in this
camcorder.
2 Connected device: Load the
recorded cassette or disc.
FUNC.
NOTES
We recommend powering the camcorder using
the compact power adapter.
3 Press
[
, select (
)
REC PAUSE] and press (
).
4 Select (
).
5 Connected device: Start the
playback.
) [EXECUTE] and press
Copyright Signal
Certain software tapes are copyright
protected. If you attempt to play back such
tape, “COPYRIGHT PROTECTED
PLAYBACK IS RESTRICTED” appears and
you will not be able to view the contents of
(
In record pause mode and while
recording you can check the picture on
the camcorder’s screen.
66
Connecting to a TV or VCR
the tape. If you attempt to record from such
tape via the HDV/DV terminal,
FUNC.
MENU
“COPYRIGHT PROTECTED DUBBING
RESTRICTED” appears and you will not be
able to record the contents of the tape.
AUDIO SETUP
AUDIO DUB.
Desired option
FUNC.
Audio Dubbing
You can add sound to a recording using the
built-in microphone.
Dubbing
only: You can also record
additional sound from external audio
devices.
(
POINTS TO CHECK
You can only dub audio on tapes recorded in
SD mode with [ 12bit] audio. This function
is operated with the wireless controller.
Connecting an External Audio Device
Connect the external audio device (CD
player, etc.) to the camcorder using
STOP
1
connection type
(
audio plugs (red and white) of the STV-250N
Stereo Video Cable and leave the yellow
video plug unconnected.
Refer also to the instruction manual of the
connected device.
REW
PLAY
STOP
FF
PAUSE
PAUSE
SLOW
ZERO SET
AUDIO DUB. MEMORY
TV SCREEN
TO
SELECT THE AUDIO SOURCE
AUDIO DUB.
(
Options
Default value
1 Locate the scene you wish to start
audio dubbing.
[
AUDIO IN]
Dub audio from an external analog device.
MIC.IN]
Before locating the starting point, you
can also set the zero set memory
[
(
33) at the point where you want
Dub audio using the built-in microphone.
the audio dubbing to end. The
camcorder will automatically stop
audio dubbing at that point.
PAUSE
FUNC.
2 Press
3 Press
.
.
AUDIO DUB.
“AUDIO DUB.” and
appear.
67
Connecting to a TV or VCR
4 Press PAUSE
to begin dubbing.
Audio device: Begin
•
playback.
• Microphone: Speak into the
microphone.
5 Press STOP to stop dubbing.
Audio device: Stop playback.
IMPORTANT
ꢀAudio dubbing will stop if the tape has a blank
section or a section recorded in LP mode or
[
16bit] audio.
ꢀYou cannot use the DV terminal for audio
dubbing.
ꢀThe quality of the dubbed sound will not be as
good when dubbing audio to a tape that was not
recorded with this camcorder or after having
dubbed audio over the same scene more than 3
times.
NOTES
ꢀWhile dubbing audio using the built-in
microphone: You can connect the camcorder to
a TV to check the picture on the TV screen and
check the sound through headphones
connected to the TV.
ꢀ
While dubbing audio using an
external audio device: You can check the
picture on the camcorder's LCD screen and the
sound through the built-in speaker or the audio
device.
T
O
SELECT THE AUDIO TRACK FOR PLAYBACK
You can select the audio track that will be
played when playing back a tape that was
audio dubbed (
68
Connecting to a Computer
Connecting to
a
Computer
Connecting to a Computer
PC Connection Diagrams
DV Terminal
Check the type and orientation
of the terminal and make sure
you connect the DV cable
properly.
USB Terminal
Open the terminal cover to
access.
Terminal on the Connected
Device
Terminal on the Camcorder
Connecting Cable
1
Output connection (Signal Flow ) to a computer with a DV (IEEE1394) terminal or a
DV capture board.
DV Cable
(Commercially available)
4-pin
6-pin*
* Be careful to correctly insert the 6-pin plug into the DV terminal. Inserting it in the wrong direction
can result in damage to the camcorder.
2
Output connection (Signal Flow ) to a PC or PictBridge compatible printer with an
USB port.
USB Cable (Supplied)
69
Connecting to a Computer
with a USB cable, and that no other IEEE1394
device is connected to the computer.
ꢀDepending on the video editing software, you
Transferring Video Recordings
You can transfer recordings to a computer
using the DV terminal.
may need to set the
switch on the
camcorder to a mode other than PLAY. Refer to
the instruction manual of the editing software.
Equipment and System Requirements
ꢀA computer equipped with an
IEEE1394 (DV) terminal or an IEEE1394
(DV) capturing board.
ꢀA DV cable (commercially available).
ꢀVideo Editing Software.
NOTES
ꢀWe recommend powering the camcorder
using the compact power adapter.
ꢀRefer also to the instruction manual of the
computer.
ꢀThe programs ZoomBrowser EX and Image
Browser included with the supplied CD-ROM
can only be used to transfer still images
recorded on the memory card. Video recordings
on the tape cannot be transferred to the
computer using the software included with the
supplied CD-ROM.
ꢀThe appropriate driver
A driver is preinstalled on Windows
operating systems later than Windows 98
Second Edition and Mac operating
systems later than Mac OS 9, and will be
installed automatically.
Connecting
1 Start the computer.
2 Set the camcorder to
mode.
3 Connect the camcorder to the
computer using the digital
connection –connection type 1
Transferring Still Images or Movie Clips –
Direct Transfer
You can transfer still images and movie
clips recorded on the memory card to a
computer using the supplied USB cable
and the Digital Video Software included in
the software CD-ROM.
(
section PC Connection Diagrams.
4 Start the video editing software.
Refer to the instruction manual of the
editing software.
Preparations
The first time you connect the camcorder
to the computer, you need to install the
software and set the auto-launch setting.
From the second time on, you will only
need to connect the camcorder to the
computer to transfer images.
1 Install the supplied Digital Video
Software.
IMPORTANT
ꢀThe video transfer may not work correctly
depending on the software and the
specifications/settings of your computer.
ꢀIf the computer freezes while the camcorder
is connected to it, disconnect the DV cable and
turn off the camcorder and the computer. After a
short while, turn them on again, set the
camcorder to
connection.
ꢀBefore connecting the camcorder to the
computer using a DV cable, make sure that the
camcorder and computer are not connected
See Installing the Digital Video
Software in the Digital Video Software
instruction manual (electronic version
on PDF file).
mode and restore the
2 Set the camcorder to
mode.
70
Connecting to a Computer
the USB cable without installing the software
from the supplied software CD-ROM.
3 Connect the camcorder to the
computer using the USB connection
–connection type 2 (
in the previous section PC
Connection Diagrams.
Transferring Images
[
ALL IMAGES...]
Transfers all images to the computer.
NEW IMAGES...]
See Connecting the Camcorder to a
Computer in the Digital Video
Software instruction manual
(electronic version on PDF file).
4 Set the auto-launch setting.
• See Starting CameraWindow
(Windows) or Auto-downloading
(Macintosh) in the Digital Video
Software instruction manual (electronic
version on PDF file).
[
Transfers only those images that have not
yet been transferred to the computer.
[
TRANSFER ORDERS...]
Transfers images with transfer orders
(
[
SELECT & TRANSFER...]
• The direct transfer menu appears on
the camcorder screen.
Allows you to select the still image you
want to transfer to the computer.
[
WALLPAPER...]
IMPORTANT
Allows you to select the still image you
want to transfer and set it as your
computer’s desktop background.
ꢀWhen the CARD access indicator is on or
flashing do not perform the following actions.
Doing so may result in permanent data loss.
- Do not open the memory card slot cover and
do not remove the memory card.
- Do not disconnect the USB cable.
- Do not turn off the camcorder or the computer.
- Do not change the position of the
switch or the operating mode.
/
ꢀOperation may not work correctly depending
on the software and the specifications/settings
of your computer.
ꢀThe image files on your memory card are
valuable, original data files. If you wish to use
the image files on your computer, make copies
of them first, and use the copied file, retaining
the original.
NOTES
ꢀWe recommend powering the camcorder
using the compact power adapter.
ꢀRefer also to the computer’s instruction
manual.
ꢀUsers of Windows XP and Mac OS X:
Your camcorder is equipped with the standard
Picture Transfer Protocol (PTP) allowing you to
download still images (JPEG only) simply by
connecting the camcorder to a computer using
71
Connecting to a Computer
1 Select (
press (
) a transfer option and
).
Transfer Orders
You can mark the still images you want to
transfer to the computer as a transfer
order. You can set transfer orders for up
to 998 still images.
IF YOU SELECT
[
ALL IMAGES], [
NEW
IMAGES] OR
[
TRANSFER ORDERS]
2 In the confirmation screen, select
(
) [OK] and press (
).
• The images are transferred and
displayed on the computer.
• The camcorder returns to the transfer
menu once the transfer is complete.
• To cancel the transfer, select (
[CANCEL] and press ( ), or press
Selecting Still Images to Transfer
(Transfer Order)
Do not connect the USB cable to the
camcorder while setting the transfer
orders.
)
FUNC.
.
(
IF YOU SELECT
[
SELECT & TRANSFER] OR
[
WALLPAPER]
FUNC.
2 Select (
transfer and press (
) the image you wish to
).
• [ SELECT & TRANSFER]: The
selected image is transferred and
displayed on the computer. To
continue transferring, select another
image.
• [ WALLPAPER]: The selected
image is transferred to the computer
and displayed as the desktop’s
background.
FUNC.
TRANS.ORDER OFF
TRANS.ORDER ON*
FUNC.
* To cancel a transfer order, select [TRANS.
ORDER OFF] instead.
Setting Transfer Orders from the Index
Screen
FUNC.
• Press
menu.
to return to the transfer
(
Move the zoom lever toward W to enter
the still image index screen.
NOTES
When the camcorder is connected to the
computer and the image selection screen is
displayed, press
transfer menu.
FUNC.
FUNC.
to return to the
72
Connecting to a Printer
Connecting to
a
Printer
FUNC.
CARD OPERATIONS
TRANSFER ORDER
Connecting to a Printer
Printing Still Images – Direct Print
Bring (
,
) the cursor
to the image you want to
transfer and press (
Repeat this step to set
transfer orders for additional
images.
).*
FUNC.
**
The camcorder can be connected to any
PictBridge compatible printer. You can mark
the still images you want to print and set the
desired number of copies as a print order
*
appears on images marked with a
(
transfer order. Press (
transfer order.
) to cancel the
Canon printers: SELPHY CP and SELPHY
DS printers and PIXMA printers marked with
the PictBridge logo.
**After closing the menu the camcorder returns
to the index screen.
Connecting the Camcorder to the Printer
Erasing All Transfer Orders
(
(
1 Insert the memory card containing
the still images you want to print.
2 Turn on the printer.
FUNC.
3 Connect the camcorder to the
printer using the USB connection
FUNC.
MENU
–connection type 2 (
in the previous section PC
Connection Diagrams.
appears and changes to
CARD OPERATIONS
TRANS.ORD.ALL ERASE
YES
.
IMPORTANT
FUNC.
If
continues to flash (for more than 1
does not appear, the camcorder
minute) or if
is not correctly connected to the printer. In such
case, disconnect the USB cable and turn off the
camcorder and the printer. After a short while,
turn them on again, set the camcorder to
mode and restore the connection.
NOTES
ꢀ
will appear for images that cannot be
printed.
ꢀWe recommend powering the camcorder
using the compact power adapter.
ꢀRefer also to the printer’s instruction manual.
73
Connecting to a Printer
[
Print Effect]
Selecting the Print Settings
The print effect can be used with printers
compatible with the Image Optimize
function to achieve higher quality prints.
Select [ON], [OFF] or [DEFAULT].
Canon PIXMA/SELPHY DS printers: You can
also select [VIVID], [NR] and [VIVID+NR].
You can select the number of copies and
other settings for printing. The setting
options vary depending on your printer
model.
Paper settings
Current paper settings (paper size,
paper type and page layout)
[
Number of Copies]
Select 1-99 copies.
NOTES
ꢀPrint setting options and [DEFAULT] settings
vary depending on the printer model. For
details, refer to the printer’s instruction manual.
Number of copies
ꢀ
Canon PIXMA/SELPHY DS Printers:
Print effect
Date printing
- When the paper size is set to [10 x 14.8 cm]
you can print multiple small copies on a single
print by selecting 2-, 4-, 9- or [16-UP]. You can
also use this setting to print on the specially
designed photo stickers sheets.
Options
[PAPER]
- When the paper size is set to [A4] you can
print 4 copies on the same sheet by selecting
[4-UP].
[
PAPER SIZE]
Available paper sizes vary depending on
the printer model.
ꢀ
Canon PIXMA/SELPHY CP Printers:
- When the paper size is set to [CREDITCARD]
you can print multiple small copies on a single
print by selecting 2-, 4-, or [8-UP]. You can also
use [8-UP] to print on the specially designed
photo stickers sheets.
[
PAPER TYPE]
Select [PHOTO], [FAST PHOTO] or
[DEFAULT].
- When the paper size is set to [10 x 14.8 cm]
or [9 x 13 cm] you can print 2 or 4 copies on the
same sheet by selecting [2-UP] or [4-UP].
- When you are using the specially designed
wide-sized photo paper you can set the paper
size to [DEFAULT] and print 2 or 4 copies on
the same sheet by selecting [2-UP] or [4-UP].
[
PAGE LAYOUT]
Select [DEFAULT] or one of the following
available page layouts.
[BORDERED]: Prints the whole image
area almost exactly as the recorded still
image.
[BORDERLESS]: Enlarges the center
portion of the still image to fit the width/
height ratio of the selected paper size. The
top, bottom and sides of the still image
may be slightly trimmed out.
[2-UP], [4-UP], [8-UP], [9-UP], [16-UP]:
Prints multiple small copies of the same
still image on one sheet of paper.
[
Date print]
Select [ON], [OFF] or [DEFAULT].
74
Connecting to a Printer
Refer also to the printer’s instruction manual for
details.
Printing after Changing the Print Settings
- If the error still persists and printing does not
restart, disconnect the USB cable and turn off
the camcorder and the printer. After a short
while, turn them on again, set the camcorder to
mode and restore the connection.
WHEN YOU HAVE FINISHED PRINTING
Disconnect the cable from the camcorder and
printer and turn off the camcorder.
IMPORTANT
ꢀThe following still images may not be
correctly printed with a PictBridge compatible
printer.
- Images created or changed on a computer
and transferred to the memory card.
- Images recorded with the camcorder but
edited on a computer.
- Images whose file names were changed.
- Images not recorded with this camcorder.
ꢀObserve the following precautions during
printing:
P.SET
1 Press
.
• The print setting menu appears.
• Depending on the printer, the
message “BUSY.” may appear before
the camcorder displays the print
setting menu.
2 In the print settings menu, select
(
,
) the setting you want to
- Do not turn off the camcorder or the printer.
change and press (
).
- Do not change the position of the
switch.
- Do not disconnect the USB cable.
- Do not remove the memory card.
ꢀIf the message “BUSY.” does not disappear,
disconnect the USB cable and restore the
connection after a short while.
/
3 Select (
) the desired setting
option and press (
).
4 Select (
) [PRINT] and press (
).
• Printing starts. The print setting menu
disappears when the printing is
completed.
• To continue printing, select another
still image.
TO CANCEL THE PRINTING
Press (
) while printing. A confirmation dialog
appears. Select [OK] and press (
). With
Canon’s PictBridge compatible printers, the
printing will stop immediately (even if not
completed) and the paper will be fed through.
PRINTING ERRORS
If an error occurs during the printing process, an
error message appears (
- Canon’s PictBridge compatible printers:
Resolve the error. When printing does not
resume automatically, select [CONTINUE] and
press (
select [STOP], press (
). If [CONTINUE] cannot be selected,
) and retry printing.
75
Connecting to a Printer
FUNC.
CARD OPERATIONS
PRINT ORDER
Print Orders
You can mark the still images you want to
print and set the desired number of
copies as a print order. These print order
settings are compatible with the Digital
Print Order Format (DPOF) standards
and can be used for printing on DPOF
Bring (
to the image you want to
print and press
,
) the cursor
(
).
compatible printers (
print orders for up to 998 still images.
Set ( ) the desired number
of copies and press .*
Repeat these steps to set
print orders for additional
images.
(
)
Selecting Still Images for Printing
(Print Order)
Do not connect the USB cable to the
camcorder while setting the print orders.
FUNC.
**
*
and the number of copies appear on
images marked with a print order. To cancel
the print order set (
to 0.
) the number of copies
(
**After closing the menu the camcorder returns
to the index screen.
FUNC.
Erasing All Print Orders
FUNC.
PRINT ORDER
(
Select (
copies (0 - 99) and press (
) the number of
FUNC.
FUNC.
).*
* To cancel the print order, set the number of
copies to 0.
FUNC.
MENU
Setting Print Orders from the Index Screen
CARD OPERATIONS
PRINT ORD.ALL ERASE
YES
(
Move the zoom lever toward W to enter
the still image index screen.
FUNC.
FUNC.
76
Connecting to a Printer
Printing
PRINT
FUNC.
1 Connect the camcorder to the
printer using the USB connection –
connection type 2 (
in the previous section PC
Connection Diagrams.
FUNC.
) [
2 Press
, select (
MENU] and press (
).
3 Select (
press (
) [
).
PRINT] and
• The print setting menu appears.
• The error message “SET
ORDER” appears if you connect a
printer with direct print function and
select [ PRINT] without having set
any print orders.
PRINT
4 Make sure that [PRINT] is selected
and press (
).
Printing starts. The print setting menu
disappears when the printing is
completed.
NOTES
ꢀDepending on the connected printer, you can
change some print settings before step 4
(
ꢀ
ꢀ
Cancel Printing/Printing Errors
Restarting Printing: Open the print menu as
(
explained in steps 2-3 above. Select [RESUME]
in the print setting menu and press (
remaining images will be printed.
). The
Printing cannot be restarted when the print
order settings have been changed or if you
deleted a still image with print order settings.
77
Trouble?
Additional Information
Trouble?
Troubleshooting
If you have a problem with your camcorder, refer to this checklist. Consult your dealer
or a Canon Service Center if the problem persists.
Power Source
Problem
Solution
• Camcorder will not turn on.
• The camcorder switches off
by itself.
Battery pack is exhausted. Replace or charge the battery pack.
• The cassette compartment
cover will not open.
Attach the battery pack correctly.
Use the compact power adapter.
• The cassette compartment
stopped half way while
inserting/removing a tape.
• The LCD/viewfinder switches
on and off.
Battery pack will not charge.
Charge the battery pack in temperatures between 0 °C and
40 °C (32 °F and 104 °F).
–
–
Battery packs become hot with use and may not charge. When
the battery pack is outside the charging temperature range, the
CHG (charge) indicator will flash irregularly. The charging will
start once the battery pack temperature is below 40 °C (104 °F).
The battery pack is damaged. Use a different battery pack.
–
If you connect a faulty power adapter or battery pack, the
CHARGE indicator flashes approx. twice per second and the
charging stops.
Check that the compact power adapter is correctly connected to
the camcorder.
Recording/Playback
Problem
Solution
Turn on the camcorder.
Load a cassette.
Buttons will not work.
–
–
Abnormal characters appear on Disconnect the power source and reconnect it after a short time.
the screen. The camcorder
does not operate properly.
If the problem still persists, disconnect all power sources
(including the battery pack and the backup battery). This will
reset all the camcorder's settings.
“
“
“
” flashes on the screen.
” flashes on the screen.
” flashes on the screen.
Load a cassette.
Battery pack is exhausted. Replace or charge the battery pack.
Condensation is detected. See reference page.
Remove the cassette and reinsert it.
“REMOVE THE CASSETTE”
appears on the screen.
The wireless controller will not
work.
Set [WL.REMOTE] to [ON].
The battery of the wireless controller is exhausted. Replace the
battery.
78
Trouble?
Problem
Solution
Video noise appears on screen. When using the camcorder in a room where a plasma TV is
located, keep a distance between the camcorder and the
plasma TV.
–
–
–
Video noise appears on the TV When using the camcorder in a room where a TV is located,
screen.
keep a distance between the compact power adapter and the
power or antenna cables of the TV.
The tape stops during record
pause or playback pause.
To protect the tape and video heads, the camcorder will enter
the stop mode ( ) if left in playback pause (
) or record
pause (
) mode for 4 minutes 30 seconds. To resume the
Start/Stop
operation press
(when recording) or push the joystick
(during playback).
(
) towards
/
Recording
Problem
Solution
Image will not appear on the
screen.
Set the camcorder to
.
“SET THE TIME ZONE, DATE Set the time zone, date and time.
AND TIME” appears on the
Replace the backup lithium battery and set the time zone, date
screen.
and time.
Pressing the start/stop button
will not start recording.
Set the camcorder to
Load a cassette.
Tape reached the end (“
.
END” appears on the screen).
Rewind the tape or replace the cassette.
Cassette is protected (“
” flashes on the screen). Change the
position of the protect switch.
Camcorder will not focus.
Autofocus does not work on that subject. Focus manually.
If you are using the viewfinder, adjust it with the dioptric
adjustment lever.
Lens is dirty. Clean the lens with a soft lens-cleaning cloth.
Never use tissue paper to clean the lens.
–
Sound is distorted.
When recording near loud sounds (such as fireworks or
concerts), sound may become distorted.
Viewfinder picture is blurred.
Adjust the viewfinder with the dioptric adjustment lever.
Playback
Problem
Solution
During playback there is video Video heads are dirty. Clean the video heads.
noise.
Pressing the playback button
does not start playback.
Load a cassette.
Set the camcorder to
.
Tape reached the end (“
Rewind the tape.
END” appears on the screen).
79
Trouble?
Problem
Solution
No sound from the built-in
speaker.
Open the LCD panel.
–
Speaker volume is turned off. Adjust the volume with the
[SPEAKER VOLUME] setting.
Image will not appear on the
TV screen.
Check again that the camcorder is properly connected to the TV. 63
Tape is running, but image will TV/VIDEO selector on the TV is not set to VIDEO. Set the
not appear on the TV screen.
selector to VIDEO.
Video heads are dirty. Clean the video heads.
You attempted to play back or dub copyright a protected tape.
Stop playback/dubbing.
Memory Card Operation
Problem
Solution
Memory card cannot be
inserted.
Memory card was not facing the correct direction. Turn the
memory card over and reinsert it.
Cannot record on the memory
card.
Memory card is full. Erase still images to free some space or
replace the memory card.
Memory card was not initialized. Initialize the memory card.
The folder and file numbers have reached their maximum value.
Set [FILE NOS.] to [RESET] and insert a new memory card.
Memory card cannot be played Set the camcorder to
back.
.
Image cannot be erased.
Image is protected. Cancel the protection.
–
The write-protect switch on an SD or SDHC memory card is set
to prevent accidental erasure. Change the position of the write-
protect switch.
“
” flashes in red.
Card error occurred. Turn off the camcorder. Remove and
reinsert the memory card. Initialize the memory card if flashing
persists.
Printing
Problem
Solution
The printer is not operating
even though the camcorder
and printer are correctly
connected.
Disconnect the USB cable and turn off the camcorder and the
printer. After a short while, turn them on again, set the
–
camcorder to
mode and restore the connection.
Editing
Problem
Solution
Cannot record with this
Wrong signal standard. Refer also to the instruction manual of
–
camcorder video input from an the connected device.
external video device
connected using a DV cable.
80
Trouble?
List of Messages
Message
Explanation/Solution
SET THE TIME ZONE,
DATE AND TIME
You have not set the time zone, date and time. This message
appears each time you turn the power on until you set the time
zone, date and time.
CHANGE THE BATTERY
PACK
Battery pack is exhausted. Replace or charge the battery pack.
–
THE TAPE IS SET FOR
ERASURE PREVENTION
Cassette is protected. Replace the cassette or change the position
of the protect switch.
REMOVE THE CASSETTE Camcorder stopped operating to protect the tape. Remove the
cassette and reinsert it.
CHECK THE INPUT
The DV cable is not correctly connected to the DV terminal, or the
connected digital device is turned off.
The video input signal is in a different television system (PAL or
SECAM).
CONDENSATION HAS
BEEN DETECTED
Condensation has been detected in the camcorder.
CONDENSATION HAS
BEEN DETECTED
Condensation has been detected in the camcorder. Remove the
cassette.
REMOVE THE CASSETTE
TAPE END
Tape reached the end. Rewind the tape or replace the cassette.
–
CHECK THE CASSETTE
[REC MODE]
You attempted to dub audio on a tape recorded in a recording mode
other than SP.
CHECK THE CASSETTE
[AUDIO MODE]
You attempted to dub audio on a tape recorded with an audio mode
–
other than [
16bit].
CHECK THE CASSETTE
[BLANK]
You attempted to dub audio on a tape with a blank section.
CHECK THE CASSETTE
[INCORRECT TAPE
SPECIFICATION]
You attempted to dub audio on a tape recorded in HD standard.
INCORRECT TAPE
SPECIFICATION
You attempted to play back a tape recorded in a different television
system (PAL or SECAM) or in a recording standard not supported
by this camcorder.
–
INPUT SIGNAL NOT
SUPPORTED
The digital device connected with the DV cable is incompatible with
the camcorder.
–
HEADS DIRTY, USE
Video heads are dirty. Clean the video heads.
CLEANING CASSETTE
COPYRIGHT PROTECTED You attempted to play back a copyright protected tape.
PLAYBACK IS
RESTRICTED
COPYRIGHT PROTECTED You attempted to dub a copyright protected tape. May also appear
DUBBING RESTRICTED
when an anomalous signal is received during analog line-in
recording.
NO CARD
Memory card not is inserted into the camcorder.
No images are recorded on the memory card.
–
NO IMAGES
81
Trouble?
Message
CARD ERROR
Explanation/Solution
A memory card error occurred. The camcorder cannot record or
display the image.
–
The error may be temporary. If the message disappears after 4
seconds and “ ” flashes red, turn the camcorder off, remove the
card and reinsert the card. If “ ” changes to green, you can
continue recording/playback.
CARD FULL
Memory card is full. Erase some images to free some space or
replace the memory card.
–
THE CARD IS SET FOR
ERASURE PREVENTION
The write-protect switch on an SD or SDHC memory card is set to
prevent accidental erasure. Change the position of the write-protect
switch.
NAMING ERROR
The folder and file numbers have reached their maximum value.
Set the [FILE NOS.] option to [RESET] and erase all the images on
the memory card or initialize it.
UNIDENTIFIABLE IMAGE
The image file is corrupted or it was saved using a compression
method other than that compatible with this camcorder (JPEG).
–
TRANSFER ORDER
ERROR
You attempted to set more than 998 transfer orders.
PRINT ORDER ERROR You attempted to set more than 998 still images in the print order.
–
CANNOT TRANSFER!
You attempted to transfer a still image that cannot be displayed with
this camcorder.
THIS IMAGE CANNOT BE
RECORDED
Some analog images cannot be recorded on the memory card
depending on the signal.
–
–
TOO MANY STILL IMAGES Disconnect the USB cable and decrease the number of still images
DISCONNECT USB CABLE on the memory card to less than 1800. If a dialog appeared on the
computer screen, close it and then restore the connection.
Direct Print Related Messages
NOTES
About Canon PIXMA/SELPHY DS Printers: If the printer’s error indicator flashes or an error
message appears on the printer’s operation panel, refer to the printer’s instruction manual.
Message
Explanation/Solution
PAPER ERROR
There is a problem with the paper. The paper is not correctly loaded or the
paper size is wrong.
Alternatively, if the paper output tray is closed, open it to print.
NO PAPER
PAPER JAM
Paper is not correctly inserted or there is no paper.
The paper jammed during printing. Select [STOP] to cancel printing. After
removing the paper, set some paper again and retry printing.
INK ERROR
NO INK
There is a problem with the ink.
The ink cartridge is not inserted or is out of ink.
82
Trouble?
Message
Explanation/Solution
LOW INK LEVEL
The ink cartridge needs to be replaced soon. Select [CONTINUE] to restart
printing.
INK ABSORBER FULL
Select [CONTINUE] to resume printing. Contact a Canon Service Center
(refer to the list included with the printer) to replace the ink absorber.
• FILE ERROR
You attempted to print an image that was recorded with another
• CANNOT PRINT!
camcorder, with a different compression, or was edited on a computer.
SET PRINT ORDER
PRINTER ERROR
No still image on the memory card has been marked with a print order.
Cancel printing. Turn the printer off and then on again. Check the printer
status. If the error still persists, refer to the printer’s instruction manual and
contact the appropriate customer support center or service center.
PRINT ERROR
Cancel printing, disconnect the USB cable and turn off the printer. After a
while, turn the printer back on and reconnect the USB cable. Check the
printer status.
HARDWARE ERROR
Cancel printing. Turn off the printer and turn it back on. Check the printer
status. If the printer is equipped with a battery, it might be exhausted. In
such case, turn off the printer, replace the battery and turn it back on.
COMMUNICATION
ERROR
The printer is experiencing a data transfer error. Cancel printing.
Disconnect the USB cable and turn off the camcorder and the printer. After
a short while, turn them on again, set the camcorder to
mode
and restore the connection. If you attempted to print from a memory card
that contains a large number of images, reduce the number of images.
PRINTER IN USE
The printer is in use. Check the printer status.
PAPER LEVER ERROR
Paper lever error occurred. Adjust the paper selection lever to the proper
position.
PRINTER COVER OPEN
NO PRINTHEAD
Close the printer cover securely.
No print head is installed in the printer or the print head is defective.
83
Do’s and Don’ts
Do’s and Don’ts
Handling Precautions
Battery Pack
DANGER!
Treat the battery pack with care.
• Keep it away from fire (or it might
explode).
Camcorder
ꢀDo not carry the camcorder by the LCD
panel. Be careful when closing the LCD
panel.
• Do not expose the battery pack to
temperature higher than 60 °C (140 °F).
Do not leave it near a heater or inside a
car in hot weather.
• Do not try to disassemble or modify it.
• Do not drop or knock it.
ꢀDo not leave the camcorder in places
subject to high temperatures (like the
inside of a car under direct sunlight), or
high humidity.
ꢀDo not use the camcorder near strong
electric or magnetic fields such as above
TVs, near plasma TVs or mobile phones.
ꢀDo not point the lens or viewfinder at
strong light sources. Do not leave the
camcorder pointed at a bright subject.
ꢀDo not use or store the camcorder in
dusty or sandy places. The camcorder is
not waterproof – avoid also water, mud or
salt. If any of the above should get into
the camcorder it may damage the
camcorder and/or the lens.
• Do not get it wet.
ꢀCharged battery packs continue to
discharge naturally. Therefore, charge
them on the day of use, or the day before,
to ensure a full charge.
ꢀAttach the terminal cover whenever a
battery pack is not in use. Contact with
metallic objects may cause a short circuit
and damage the battery pack.
ꢀDirty terminals may cause a poor
contact between the battery pack and the
camcorder. Wipe the terminals with a soft
cloth.
ꢀSince storing a charged battery pack for
a long time (about 1 year) can shorten its
lifecycle or affect performance, we
recommend to discharge the battery pack
fully and to store it in a dry place at
temperatures no higher than 30 °C
(86 °F). If you do not use the battery pack
for long periods, charge and discharge it
fully at least once a year. If you have
more than one battery pack, perform
these precautions at the same time for all
battery packs.
ꢀBe careful of heat generated by lighting
equipment.
ꢀDo not disassemble the camcorder. If
the camcorder does not function properly,
consult qualified service personnel.
ꢀHandle the camcorder with care. Do not
subject the camcorder to shocks or
vibration as this may cause damage.
ꢀAlthough the battery pack’s operating
temperature range is from 0 °C to 40 °C
(32 °F to 104 °F), the optimal range is
from 10 °C to 30 °C (50 °F to 86 °F). At
cold temperatures, performance will
temporarily decline. Warm it in your
pocket before use.
84
Do’s and Don’ts
ꢀReplace the battery pack if the usable
time after full charge diminishes
substantially at normal temperatures.
ꢀWith cassettes equipped with a memory
function, metal plated terminals may
become dirty with use. Clean the
terminals with a cotton swab after about
10 times of removing and reinserting the
cassette. The memory function is not
supported by the camcorder.
About the battery terminal cover
The battery terminal cover has a [
shaped hole. This is useful when you
]-
wish to differentiate between charged and
uncharged battery packs.
Protecting Tapes from Accidental Erasure
To protect your recordings from accidental
erasure, slide the tab on the cassette to
SAVE or ERASE OFF.
Back side of the battery pack
Terminal cover attached
Charged
REC
SAVE
REC
SAVE
Uncharged
Memory Card
Cassette
ꢀWe recommend saving backups of
memory card images on your computer.
Image data may be corrupted or lost due
to memory card defects or exposure to
static electricity. Canon Inc. makes no
warranties for corrupted or lost data.
ꢀDo not turn off the camcorder,
disconnect the power source or remove
the memory card while the CARD access
indicator is flashing.
ꢀRewind tapes after use. A slack or
damaged tape may cause video problems
and/or audio distortions during playback.
ꢀReturn cassettes to the case and store
them upright. Rewind tapes from time to
time if they are stored for a long time.
ꢀDo not leave the cassette in the
camcorder after use.
ꢀDo not use spliced tapes or
nonstandard cassettes as they may
damage the camcorder.
ꢀDo not use tapes that have been
jammed as video heads may become
dirty.
ꢀDo not use memory cards in places
subject to strong magnetic fields.
ꢀDo not leave memory cards in places
subject to high humidity and high
temperature.
ꢀDo not insert anything into the small
holes of the cassette, or cover them with
cellophane tape.
ꢀDo not disassemble, bend, drop, or
subject memory cards to shocks and do
not expose them to water.
ꢀHandle cassettes with care. Do not
drop or subject them to severe impact as
this may damage the cassettes.
ꢀDo not touch or expose the terminals to
dust or dirt.
ꢀCheck the direction before inserting the
memory card. Forcing a memory card into
85
Do’s and Don’ts
the slot if it is not correctly oriented may
damage the memory card or the
camcorder.
ꢀDo not attach any labels or stickers on
the memory card.
ꢀKeep the battery out of the reach of
children. If swallowed, seek medical
assistance immediately. The battery case
may break and the battery fluids may
cause internal damage.
ꢀWhen you erase image files or initialize ꢀDo not disassemble, heat or immerse
the memory card, only the file allocation
table is altered and the data itself is not
actually deleted. Take the necessary
precautions when you dispose of the
memory card, for example by physically
damaging it to prevent the leakage of
private data.
the battery in water to avoid the risk of
explosion.
ꢀ
For California, USA only: Included lithium
battery contains Perchlorate Material –
special handling may apply. See
perchlorate for details.
Lithium Button Battery
WARNING!
• The battery used in this device may
present a fire or chemical burn hazard if
mishandled. Do not recharge,
disassemble, heat above 100 °C (212 °F)
or incinerate the battery.
Backup battery CR1616:
• Replace the battery with a CR1616 made
by Panasonic, Hitachi Maxell, Sony,
Toshiba, Varta or Renata. Use of other
batteries may present a risk of fire or
explosion.
Lithium battery for the wireless controller
CR2025:
• Replace the battery with a CR2025 made
by Panasonic, Hitachi Maxell, Sony,
Sanyo, or with Duracell2025. Use of
other batteries may present a risk of fire
or explosion.
• Dispose of the used battery according to
applicable recycling regulations.
ꢀDo not pick up the battery using
tweezers or other metal tools as this will
cause a short circuit.
ꢀWipe the battery with a clean dry cloth
to ensure proper contact.
86
Do’s and Don’ts
Maintenance/Others
Condensation
Moving the camcorder rapidly between
hot and cold temperatures may cause
condensation (water droplets) to form on
its internal surfaces. Stop using the
camcorder if condensation is detected.
Continued use may damage the
camcorder.
Cleaning the Camcorder
Camcorder Body
ꢀUse a soft, dry cloth to clean the
camcorder body. Never use chemically
treated cloth or volatile solvents such as
paint thinner.
Condensation may form in the following
cases:
Lens and Viewfinder
ꢀIf the lens surface is dirty, the autofocus
may not work properly.
ꢀRemove any dust or dirt particles using
a non-aerosol type blower brush.
ꢀUse a clean, soft lens-cleaning cloth to
gently wipe the lens or viewfinder. Never
use tissue paper.
When the camcorder is moved from an
air-conditioned room to a warm, humid
place
LCD Screen
When the camcorder is moved from a
cold place to a warm room
ꢀClean the LCD screen using a clean,
soft lens-cleaning cloth.
ꢀCondensation may form on the surface
of the screen when the temperature
changes suddenly. Wipe it with a soft dry
cloth.
When the camcorder is left in a humid
room
Storage
ꢀIf you do not intend to use the
camcorder for a long time, store it in a
place free of dust, in low humidity, and at
temperatures not higher than 30 °C
(86 °F).
When a cold room is heated rapidly
87
Do’s and Don’ts
TO AVOID CONDENSATION
ꢀDo not expose the camcorder to
sudden or extreme changes in
temperature.
ꢀRemove the cassette, place the
camcorder in an airtight plastic bag and
let it adjust to temperature changes
slowly before removing it from the bag.
Using the Camcorder Abroad
Power Sources
You can use the compact power adapter
to operate the camcorder and to charge
battery packs in any country with power
supply between 100 and 240 V AC, 50/60
Hz. Consult the Canon Service Center for
information on plug adapters for overseas
use.
WHEN CONDENSATION IS DETECTED
ꢀThe camcorder automatically shuts off,
the warning message “CONDENSATION
HAS BEEN DETECTED” appears for
approx. 4 seconds and
ꢀIf a cassette is loaded, the warning
Playback on a TV Screen
You can only play back your recordings
on TVs compatible with the NTSC
system. The NTSC system is used in the
following countries/areas:
starts flashing.
message “REMOVE THE CASSETTE”
appears and
starts flashing. Remove
American Samoa, Antigua, Aruba,
Bahamas, Barbados, Bermuda, Bolivia,
Canada, Chile, Colombia, Costa Rica,
Cuba, Ecuador, El Salvador, Guam,
Guatemala, Greenland, Haiti, Honduras,
Jamaica, Japan, Korea, Mexico,
Micronesia, Myanmar, Nicaragua,
Panama, Peru, Philippines, Puerto Rico,
Saint Kitts and Nevis, Saint Lucia, Saint
Vincent and the Grenadines, Surinam,
Taiwan, Trinidad and Tobago, USA,
Venezuela, Virgin Islands.
the cassette immediately and leave the
cassette compartment open. Leaving the
cassette in the camcorder may damage
the tape.
ꢀA cassette cannot be loaded when
condensation is detected.
RESUMING USE
ꢀThe precise time required for water
droplets to evaporate will vary depending
on the location and weather conditions.
After the condensation warning stops
flashing, wait for 1 more hour before
resuming use.
88
General Information
General Information
System Diagram (Availability differs from area to area)
WS-20 Wrist Strap
SS600/SS650
Shoulder Strap
CBC-NB2
Car Battery Charger
CB-2LW
Battery Charger
MiniDV
Video Cassette
NB-2L, NB-2LH,
BP-2L5*, BP-2L12,
BP-2L14 Battery Pack
CA-590 Compact
Power Adapter
NB-2L, NB-2LH,
BP-2L5, BP-2L12,
BP-2L14 Battery Pack
WL-D85
Wireless Controller
TV
STV-250N
Stereo Video Cable
VCR
Commercially available
DV Cable
DVD Recorder/Digital
Device with DV Terminal
Card Adapter
Reader/Writer
SD/SDHC
Memory Card
MultiMediaCard
IFC-300PCU
USB Cable
Computer
SC-2000 Soft
Carrying Case
PictBridge Compatible Printers
* The BP-2L5 is not available as a separate optional accessory.
89
General Information
Optional Accessories
Call or visit your local retailer/dealer for genuine Canon video accessories. You can
also obtain genuine accessories for your Canon camcorder by calling: 1-800-828-
4040, Canon U.S.A. Information Center.
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with genuine Canon
accessories. Canon shall not be liable for any damage to this product and/or accidents
such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a
leakage and/or explosion of a battery pack). Please note that this warranty does not apply
to repairs arising out of the malfunction of non-genuine Canon accessories, although you
may request such repairs on a chargeable basis.
Battery Packs
When you need extra battery packs, select
one of the following models: NB-2L, NB-2LH,
BP-2L12, BP-2L14.
CB-2LW Battery Charger
Use the battery charger for charging the
battery packs. It plugs directly into a power
outlet without a cable.
Battery Pack
BP-2L5
Charging Time*
70 min.
NB-2L
80 min.
NB-2LH
BP-2L12
BP-2L14
90 min.
150 min.
170 min.
* Charging time varies according to the charging condition.
CBC-NB2 Car Battery Charger
Use the car battery charger to charge battery
packs on the move. The car battery cable plugs
into your car’s cigarette lighter and runs off a
12-24 V DC negative ground battery.
90
General Information
Shoulder Strap
You can attach a shoulder strap for more
security and portability.
Pass the ends through the strap mount and
adjust the length of the strap.
WS-20 Wrist Strap
Use this for extra additional protection for
active shooting.
SC-2000 Soft Carrying Case
A handy camcorder bag with padded
compartments and plenty of space for
accessories.
This mark identifies genuine Canon video accessories. When you use
Canon video equipment, we recommend Canon-brand accessories or
products bearing the same mark.
91
General Information
Product Codes
Provided Accessories
CA-590 Compact Power Adapter
WL-D85 Wireless Controller
STV-250N Stereo Video Cable
IFC-300PCU USB Cable
D85-1671-000
D83-0712-000
3067A002AA (D82-0590-201)
6906A001AA
Optional Accessories
BP-2L12 Battery Pack
7871A002AA
BP-2L14 Battery Pack
9582A002AA
NB-2L Battery Pack
7302A001AA
CB-2LW Battery Charger
CBC-NB2 Car Battery Charger
WS-20 Wrist Strap
SC-2000 Soft Carrying Case
DVM-CL DV Cleaning Cassette
0763B001AA
7873A002AA
3118A002AA (D81-0190-202)
9389A001AA
3134A002AA (D36-0032-201)
92
General Information
Specifications
ZR850/ZR830
System
Video Recording System
2 rotary heads, helical scanning DV system (consumer digital VCR SD
system), digital component recording
Audio Recording System
Television System
Image Sensor
PCM digital sound: 16 bit (48 kHz/2 channels); 12 bit (32 kHz)
EIA standard (525 lines, 60 fields) NTSC color signal
1/6-inch CCD,
approx. 1,070,000 pixels
approx. 680,000 pixels
Effective pixels
16:9 Movies (Image stabilizer [ON])
16:9 Movies (Image stabilizer [OFF]) approx. 710,000 pixels
approx. 550,000 pixels
4:3 Movies
Still images
approx. 690,000 pixels
approx. 800,000 pixels
Effective pixels
16:9 Movies (Image stabilizer [ON])
approx. 360,000 pixels
16:9 Movies (Image stabilizer [OFF]) approx. 450,000 pixels
4:3 Movies
Still images
approx. 340,000 pixels
approx. 450,000 pixels
Compatible Tapes
Tape Speed
Videocassettes bearing the
mark
SP: 18.81 mm/s (0.74 ips); LP: 12.56 mm/s (0.49 ips)
SP: 60 minutes; LP: 90 minutes
Maximum Recording Time
(60 min. tape)
LCD Screen
Viewfinder
Microphone
Lens
2.7 in., wide, TFT color, approx. 112,000 pixels
0.35 in., wide, TFT color, approx. 114,000 pixels
Stereo electret condenser microphone
f=2.6–91 mm, F/2.0–5.0, 35x power zoom
35 mm equivalent:
16:9 Movies (Image stabilizer [ON])
47.1–1,649
16:9 Movies (Image stabilizer [OFF]) 41.7–1,460
4:3 Movies
Still images
44.6–1,561
41.5–1,453
35 mm equivalent:
16:9 Movies (Image stabilizer [ON])
45.8–1,603
16:9 Movies (Image stabilizer [OFF]) 41.0–1,435
4:3 Movies
Still images
49.8–1,743
43.6–1,526
Lens Configuration
AF system
10 elements in 8 groups
TTL autofocus, manual focus available
Minimum Focusing Distance
White Balance
1 m (3.3 ft.); 1 cm (0.39 in.) on maximum wide angle
Auto white balance, preset white balance (DAYLIGHT, TUNGSTEN) or
custom white balance
Minimum Illumination
2 lx ([NIGHT] recording program, Shutter speed at 1/8)
8 lx (Easy recording mode, Auto slow shutter [ON], Shutter speed at 1/30)
Recommended Illumination
Image Stabilization
More than 100 lx
Electronic
Memory Card
Recording Media
SDHC (SD High Capacity) memory card, SD memory card, MultiMedia
Card (MMC)*
Size of Still Images
1,152 x 864 (
pixels
only), 1,024 x 768 (
only), 640 x 480
93
General Information
Size of Movie Clips
File Format
320 x 240, 160 x 120 pixels; 15 frames/sec.
Design rule for Camera File system (DCF), Exif 2.2** compliant, DPOF
compliant
Image Compression Method
Still images: JPEG (compression: Super Fine, Fine, Normal)
Movie clips: Video - Motion JPEG, Audio - WAVE (monaural)
*
This camcorder has been tested with SD memory cards up to 2 GB. Performance cannot be guaranteed for all
memory cards.
** This camcorder supports Exif 2.2 (also called “Exif Print”). Exif Print is a standard for enhancing the
communication between camcorders and printers. By connecting to an Exif Print-compliant printer, the
camcorder’s image data at the time of shooting is used and optimized, yielding extremely high quality prints.
Input/Output Terminals
AV Terminal
∅3.5 mm minijack,
: Video output only, Audio input/output;
: output only
Video: 1 Vp-p/75 ohms unbalanced
Audio output: -10 dBV (47 kohms load/3 kohms or less)
Audio input: -10 dBV/40 kohms or more (
4 pin (IEEE1394 standard), input/output
mini-B
only)
DV Terminal
USB Terminal
Power/Others
Power supply (rated)
7.4 V DC (battery pack), 8.4 V DC (compact power adapter)
Power consumption
(AF on)
2.3 W,
2.1 W
Operating temperature
0 – 40 °C (32 – 104 °F)
Dimensions (W x H x D)
Weight (camcorder body only)
57 x 92 x 119 mm (2.2 x 3.6 x 4.7 in.) excluding the grip belt
380 g ( 13.4 oz.)
CA-590 Compact Power Adapter
Power input
100 – 240 V AC, 50/60 Hz, 0.14 – 0.08 A
Rated output
Operating temperature
Dimensions
8.4 V DC, 0.6 A
0 – 40 °C (32 – 104 °F)
46 x 26 x 70 mm (1.8 x 1.0 x 2.8 in.)
95 g (3.4 oz.)
Weight
BP-2L5 Battery Pack
Battery type
Rechargeable Lithium Ion Battery
7.4 V DC
Rated voltage
Operating temperature
Battery capacity
Dimensions
0 – 40 °C (32 – 104 °F)
530 mAh
33.3 x 16.2 x 45.2 mm (1.3 x 0.64 x 1.8 in.)
40 g (1.4 oz.)
Weight
Weight and dimensions are approximate. Errors and omissions excepted. Subject to
change without notice.
94
General Information
Index
F
A
G
I
B
J
C
L
D
M
N
E
95
General Information
P
T
R
U
V
S
W
Simultaneous recording
Z
(tape/memory card) . . . . . . . . . . . . . . 53
*
only.
96
U.S.A.
CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY FOR
THE UNITED STATES
The warranty set forward below is given by Canon U.S.A., Inc. with respect to equipment purchased in the
United States. The limited warranty is only effective upon presentation of your Bill of Sale or other proof of purchase.
Canon consumer digital video equipment is warranted under normal, non-commercial, personal use, against
defective materials or workmanship as follows:
Parts: Defective parts will be exchanged for new parts or comparable rebuilt parts for a period of ONE YEAR from
the date of original purchase, except for a defective Video Head, which will be exchanged for a period of three
months from the date of purchase.
Labor: For a period of ONE YEAR from the date of original purchase, labor will be provided free of charge by our
factory service centers or designated service facilities located in the United States.
When returning equipment under this warranty, you must pre-pay the shipping charges, and you must enclose the
Bill of Sale or other proof of purchase with a complete explanation of the problem. During your ONE-YEAR warranty
period, repairs will be made and the equipment return-shipped to you free of charge. After your warranty period is
over, you will be given an estimate of the cost of repair and an opportunity to approve or disapprove of the repair
expense before it is incurred. If you approve, repairs will be made and the equipment return-shipped to you.
(shipping charges apply). If you disapprove, we will return-ship the equipment at no charge to you.
Non-Canon brand peripheral equipment and software which may be distributed with Canon DV camcorders
are sold “AS IS” without warranty of any kind by CUSA, including any implied warranty regarding
merchantability or fitness for a particular purpose. The sole warranty with respect to such non-Canon
brand items is given by the manufacturer or producer thereof.
CUSA shall have no responsibility under this limited warranty for use of Canon DV Camcorders in conjunction with
incompatible peripheral equipment and incompatible software.
In order to obtain warranty service, contact the authorized Canon retail dealer from whom you purchased the DV
Camcorder or call the CANON INFORMATION CENTER AT 1-800-828-4040). You will be directed to the nearest
service facility for your product.
This Limited Warranty covers all defects encountered in normal use of the equipment and does not apply in the
following cases:
A) Loss or damage to the equipment due to abuse, mishandling, accident, improper maintenance, or failure to
follow operating instructions;
B) If the equipment is defective as a result of leaking batteries, sand, dirt or water damage;
C)If defects or damages are caused by the use of unauthorized parts or by service other than our authorized
agent;
D)If the equipment is used for commercial or industrial use.
This Limited Warranty does not cover cabinet (exterior finish), video cassette tape, head cleanings, nor does it apply
to equipment purchased outside the United States. This warranty does not cover units sold to rental firms, military
operations, hotels, schools, hospitals or for other commercial, industrial, or institutional applications. These uses are
covered only by such specific warranty as Canon may issue with such sales.
This Limited Warranty does not apply to accessories or consumables for the DV Camcorder, which are sold “AS IS”,
without warranty of any kind by CUSA.
Please retain this warranty card and your Bill of Sale as a permanent record of your purchase. This card is most
important in order to be sure you are contacted right away should there be a safety inspection, modification or
product recall under applicable laws or regulations.
NO IMPLIED WARRANTY, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
APPLIES TO THIS EQUIPMENT AFTER THE APPLICABLE PERIOD OF EXPRESS WARRANTY OR
GUARANTY, EXCEPT AS MENTIONED ABOVE, GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH
RESPECT TO THIS EQUIPMENT SHALL BIND THE UNDERSIGNED. (SOME STATES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSION
MAY NOT APPLY TO YOU). CUSA SHALL NOT BE LIABLE FOR LOSS OF REVENUES OR PROFITS, EXPENSE
FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES, LOSS OF DATA, OR ANY OTHER
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO
USE THE DV CAMCORDER, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND
EVEN IF CUSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF
ANY KIND AGAINST CUSA BE GREATER THAN THE PURCHASE PRICE OF THE DV CAMCORDER SOLD BY
CUSA AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, YOU ASSUME ALL
RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO YOU AND YOUR PROPERTY AND TO OTHERS
AND THEIR PROPERTY ARISING OUT OF USE, MISUSE OR INABILITY TO USE THE DV CAMCORDER NOT
CAUSED DIRECTLY BY THE NEGLIGENCE OF CUSA. (SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY
TO YOU).THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER
OF THIS EQUIPMENT OR THE PERSON FOR WHOM IT WAS PURCHASED AS A GIFT.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
CANON U.S.A., INC.
97
CANADA
CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY
The limited warranty set forth below is given by Canon Canada Inc. (“Canon Canada”) with respect to Canon digital video
equipment purchased in Canada. This limited warranty is only effective upon presentation of a bill of sale or other proof of
purchase for this Canon digital video equipment to a Canon Service Facility when repairs are required.
Canon consumer video digital equipment is warranted under normal, non-commercial, personal use, against defective
materials or workmanship as follows:
Parts: Defective parts will be exchanged for new parts or, at Canon Canada’s option, comparable rebuilt parts for a period of
one year from the date of original purchase, except Video Heads which will be exchanged for a period of 3 months from the
date of purchase.
Labour: For a period of one year from the date of original purchase, labour will be provided free of charge by our Canon
Service Facilities in Canada.
This limited warranty covers all defects except where:
(a) The loss or damage to the product results from:
i) accident, natural disaster, mishandling, abuse, neglect, unauthorized product modification or failure to follow
instructions contained in the instruction manual;
ii) the use of accessories, attachments, products, supplies, parts or devices with this Canon product that do not conform
to Canon specifications or that cause abnormally frequent service problems;
iii) repairs or services performed by any party other than a Canon Service Facility;
iv) defective batteries or any exposure to water, sand or dirt;
v) shipping (claim must be presented to the shipper);
(b) Any serial number on the video equipment is altered or removed.
(c) The digital video equipment is used for commercial, professional or industrial purposes.
This limited warranty does not cover the cabinet (exterior finish) of the digital video equipment, video cassette tapes, head
cleanings, nor does it apply to digital video equipment purchased outside Canada.
TO OBTAIN WARRANTY SERVICE
Ship your Canon digital video equipment in its original carton, box or equivalent, properly packed, fully insured with shipping
charges prepaid, together with a copy of your bill of sale or other proof of purchase and a description of the problem to any of
the Canon Service Facilities in Canada.
LIMITATIONS
Except as otherwise required by applicable legislation, this warranty is in lieu of all other warranties, conditions, guarantees or
representations, express or implied, statutory or otherwise, relative to this Canon product, including implied warranties or
conditions of merchantability or fitness for a particular purpose.
Canon Canada assumes no liability for special, consequential or incidental damages or loss that may arise, whether on
account of negligence or otherwise, from the use, misuse or inability to use this Canon product (including loss of profit,
revenue, video tapes or enjoyment) or from failure to conform to any express or implied warranties, conditions, guarantees or
representations. Any recovery under this limited warranty shall not exceed the purchase price of the product. Canon Canada
does not assume or authorize any other person to assume for Canon Canada any other liability with respect to this Canon
product.
This warranty does not extend to any person other than the original purchaser of this Canon product or the person for whom it
was purchased as a gift and states your exclusive remedy.
NOTICE TO CONSUMER
If you plan to take important videos or if the product has not been used for some time, please check all functions with the
instruction book before using it.
CANON INC.
U.S.A.
CANON U.S.A., INC. NEW JERSEY OFFICE
100 Jamesburg Road, Jamesburg, NJ 08831 USA
CANON U.S.A., INC. CHICAGO OFFICE
100 Park Blvd., Itasca, IL 60143 USA
CANON U.S.A., INC. LOS ANGELES OFFICE
15955 Alton Parkway, Irvine, CA 92618 USA
CANON U.S.A., INC. HONOLULU OFFICE
210 Ward Avenue, Suite 200, Honolulu, Hl 96814 USA
ꢁ If you have any questions, call the Canon U.S.A. Information Center
toll-free at 1-800-828-4040 (U.S.A. only).
CANADA
CANON CANADA INC. NATIONAL HEADQUARTERS
6390 Dixie Road, Mississauga, Ontario L5T 1P7
CANON CANADA INC. CALGARY
2828, 16th Street, N.E. Calgary, Alberta T2E 7K7
CANON CANADA INC. MONTREAL
5990 Côte de Liesse, Quebec H4T 1V7
ꢁ If you have any questions, call the Canon Canada Information Center
toll-free at 1-800-828-4040 (CANADA only).
ꢁ Si vous avez des questions, veuillez téléphoner sand frais au Canada
1-800-828-4040 (CANADA seulement).
MEXICO
CANON MEXICANA, S. DE R.L. DE C.V.
Periferico Sur No. 4124 Col. Ex-Rancho de Anzaldo C.P. 01900
México, D.F., México
CANON U.S.A., INC. NEW JERSEY OFFICE
100 Jamesburg Road, Jamesburg, NJ 08831 USA
CENTRO Y
CANON LATIN AMERICA, INC.
SURAMÉRICA
703 Waterford Way Suite 400 Miami, FL 33126 USA
ASIA
CANON HONGKONG COMPANY LTD.
19/F, The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon,
Hong Kong
The information on this manual is verified as of January 1st, 2007.
Les informations contenues dans ce manuel ont été vérifiées le 1er janvier 2007.
La información de este manual fue verificada el 1 de enero de 2007.
Printed on 100% reused paper.
Document réalisé avec du papier recyclé à 100%.
El papel aqui utilizado es 100% reciclado.
PUB.DIM-787
0000Ni0.0
© CANON INC. 2007
|
