PUB.DIE-262
English
DVD Camcorder
English
Instruction Manual
Introduction
Preparations
Basic
Functions
Advanced
Functions
Editing
Functions
Disc
Finalization
External
Connections
Trouble?
Do’s & Don’ts
Additional
Information
PAL
The Advantages of DVDs
RECORDING
With a DVD you just press the recording start/
stop button and the camcorder will find the empty
space on the disc (
22). Don’t waste time fast
forwarding and rewinding a tape to find from
where to start a new recording.
Never worry about mistakenly
recording over a precious memory!
PLAYING
Just select a scene from the index
screen!
Just insert your finalized* disc into a DVD player
and immediately find the scene you want to play
back from the index (
26). No need to play the
whole thing or run the tape forward and back to
find that scene you want.
*
Finalization is a process required to make the DVD discs you recorded playable
on common DVD players ( 59).
3
An Introduction to DVDs
You have probably heard of DVD discs and they come in various types and in two sizes -
the more common 12 cm DVDs and 8 cm Mini DVDs. This camcorder uses commercially
available 8 cm DVD-R or DVD-RW discs.
So... what disc to choose?
DVD-RW
DVD-R
Can be recorded only once.
You can record on it many times.
You cannot edit or delete the
recordings.
You can delete scenes or initialize the
disc and start recording again.
Now that I have the
disc... What disc
standard do I choose
to initialize it?
VIDEO mode
VR* mode
Once finalized, a disc recorded
in VIDEO mode will play in most
common DVD players. However,
you cannot edit the recordings.
You can easily edit the
recordings. However, the disc
can only be played back with
DVD players compatible with
DVD-RW discs in VR mode.
* Video Recording
4
Differences in Available
Features Depending on the Disc
The camcorder’s features and functions available will differ depending on the type of disc
you use and the disc specification selected when initializing it.
Disc Type/Specification
DVD-R
DVD-RW
Feature
VIDEO mode VIDEO mode
VR mode
Editing scenes with this camcorder
(deleting scenes, editing the Playlist)
52
–
–
–
–
Deleting a scene or still image
53
57
(
only) immediately after
recording it
Initializing the disc in order to use it
again for recording
55
Giving a title to the disc
56
59
Finalizing the disc in order to play it
with a DVD player
*
Adding recordings to a disc already
finalized
61
58
**
–
Converting still images into
Photomovie scenes
*
Playback cannot be guaranteed with all external DVD devices (DVD players, DVD recorders,
etc.).
** You will need to unfinalize the disc first.
• Recommended Discs: This camcorder’s performance was tested using Hitachi-
Maxell HG-series DVD discs. For use of other DVD media, contact directly the
manufacturer’s customer support center.
• Attempting to record or play with this camcorder DVD discs that were recorded,
initialized or finalized with other digital devices can result in lost data.
• You need to initialize newly bought DVD-RW discs with this camcorder before using
them for the first time.
• For the highest compatibility with external DVD devices we recommend using the
VIDEO mode.
5
Table of contents
Introduction
The Advantages of DVDs................................................................................3
An Introduction to DVDs..................................................................................4
Differences in Available Features Depending on the Disc...............................5
About this Manual............................................................................................8
Checking the Supplied Accessories ..............................................................10
Components Guide........................................................................................11
Screen Displays.............................................................................................13
Preparations
Getting Started...............................................................................................15
Step 1: Preparing the Power Supply......................................................15
Step 2: Preparing the Camcorder ..........................................................17
Step 3: Adjusting the LCD Screen .........................................................17
Step 4: Changing the Display Language ...............................................18
Step 5: Setting the Time Zone / Daylight Saving Time...........................18
Step 6: Setting the Date and Time.........................................................19
Step 7: Loading and Removing a Disc...................................................20
Basic Functions
Recording
Recording Movies..........................................................................................22
Selecting the Aspect Ratio of your Recordings (16:9 Widescreen or 4:3).....23
Recording Still Images .......................................................................24
Zooming.........................................................................................................25
Playback
Playing Back Movies .....................................................................................26
Adjusting the Volume.....................................................................................27
Viewing Still Images.......................................................................................28
Magnifying the Image ....................................................................................29
Selecting the Recording Data Display...........................................................30
Advanced Functions
Options Lists – MENU / FUNC. .....................................................................31
MENU Options.......................................................................................31
Camera Setup (Digital Zoom, Image Stabilizer, etc.) ..........................31
Still Image Operations (Erase All Images)...........................................32
Disc Operations (
Photomovie, Finalize, etc.)...........................32
Display Setup (LCD Brightness, Language, etc.)................................33
System Setup (Volume, Beep, etc.) ....................................................34
Date/Time Setup .................................................................................35
FUNC. Menu Options.............................................................................35
Recording Programs
Using the Recording Programs .....................................................................37
Selecting the Recording Program..................................................................38
Using the Program AE Mode .....................................................................38
Using the Shutter-Priority AE Mode .........................................................39
Using the Aperture-Priority AE Mode.......................................................40
More Recording Options
Manually Adjusting the Exposure ..................................................................41
Changing the Metering Method..........................................................41
6
Manually Adjusting the Focus........................................................................42
Changing the Autofocus Mode ......................................................................43
Using the Self Timer......................................................................................44
Setting the White Balance .............................................................................45
Applying Image Enhancing Effects................................................................47
Using the Digital Effects.................................................................................48
Selecting the Size and Quality of Still Images....................................51
E
Editing Functions
Editing the Scenes (DVD-RW in VR mode only)
Adding Scenes to the Playlist........................................................................52
Moving Scenes in the Playlist........................................................................52
Deleting Scenes ............................................................................................53
Dividing a Scene............................................................................................54
Disc Options
Protecting the Disc ........................................................................................55
Initializing the Disc.........................................................................................55
Changing the Disc Title .................................................................................56
Still Image Options
Erasing Still Images.......................................................................................57
Converting Still Images into Photomovie Scenes ..............................58
Disc Finalization
Preparing your Disc for Playing on a DVD Player – [FINALIZE] ...................59
Playing Back your Disc on a DVD Player or a Computer’s DVD Drive .........60
Recording Additional Movies on a Finalized Disc – [UNFINALIZE]...............61
External Connections
Connecting to a TV and VCR
Playing Back on a TV Screen........................................................................62
Recording to a VCR.......................................................................................64
Trouble?
Troubleshooting.............................................................................................65
List of Messages............................................................................................68
Do’s & Don’ts
Handling Precautions ....................................................................................70
Maintenance/Others ......................................................................................72
Additional Information
System Diagram............................................................................................74
Optional Accessories.....................................................................................75
Specifications.................................................................................................77
Index..............................................................................................................79
7
About this Manual
Thank you for purchasing the Canon DC100/DC95. Please read this manual carefully
before you use the camcorder and retain it for future reference. Should your camcorder
fail to operate correctly, refer to the Troubleshooting table (
65).
Conventions Used in the Manual
: Precautions related to the camcorder operation.
: Additional topics that complement the basic operating procedures.
: Reference page number.
***
(for
Buttons and switches other than the multi selector’s
are indicated as
MENU
example
).
[ ] are used to refer to menu items displayed on the screen. Menu options in boldface
indicate a default setting (for example [ON], [OFF]).
“Screen” refers to the LCD and the viewfinder screen.
The photos included in the manual are simulated pictures taken with a still camera.
: Option or feature that applies or is available only with this model.
Menu item shown at its default position
Buttons and switches to be operated
About the Multi Selector
Use the multi selector to select options in a menu and change
settings.
Push the multi selector up, down, left or right (
/
/
/
) to
select an item. In most places, press the multi selector itself (
to make a selection or change a setting.
)
Selecting an Option - MENU/FUNC.
Many of the camcorder’s functions can be adjusted from the menus that open after
MENU
FUNC.
).
pressing the MENU button (
For details about the available menu options and settings, refer to Options Lists - MENU/
FUNC. ( 31).
) and the FUNC. button (
8
Selecting MENU options
1. Press MENU .
2. Select (
) the desired menu from the
).
E
left side column and press (
The title of the selected menu appears on top of
the screen and under it the list of settings.
3. Select (
) the setting you want to
change and press (
).
• The orange selection bar indicates the menu setting currently selected. Items not
available appear in black.
• To return to the menu selection screen, select ( ) [RETURN] and press (
4. Select ( ) the desired option and press (
).
) to save the setting.
5. Press MENU .
You can press MENU to close the menu at any time.
Selecting FUNC. Menu Options
1. Press FUNC..
2. Select (
) the icon of the function you
want change from the left side column.
3. Select (
) the desired setting from the
available options at the bottom bar.
The selected option will be highlighted in light
blue.
4. Press FUNC. to save the settings and close the menu.
• You can press FUNC. to close the menu at any time.
• With some settings, you will need to make further selections (
,
) and/or
press (
(such as the
). Follow the additional operation guides that will appear on the screen
icon, small arrows, etc.).
About the Operating Modes
Operating Mode
Operating Mode Indicator
(CAMERA)
Red LED
Operation
Recording movies
22
24
26
28
/
Recording still images
Playing movies
(PLAY)
Green LED
Viewing still images
* To use the still images functions (
or
,
only
) you need to set [STILL IMAGES] to [ON] as explained below.
To activate the still images modes
1. Press MENU .
2. Select (
3. Select (
4. Select (
) [SYSTEM SETUP] and press (
) [STILL IMAGES] and press (
) [ON] and press ( ).
).
).
5. Press MENU again to close the menu.
9
To change the operating mode
In addition to turning the camcorder on and off, the power switch
also toggles the camcorder’s operating mode.
From the ON position, slide down the power switch
momentarily towards MODE and release it.
This action will toggle the operation mode in the following
sequence:
with [STILL IMAGES]
set to [OFF] (default)
with [STILL IMAGES] set to [ON]
with [STILL IMAGES] set to [ON]
**You cannot record still images with the
, but you can view still images already
recorded on a disc (with another camcorder).
Playback cannot be guaranteed for all still
images.
Checking the Supplied Accessories
CA-570 Compact
Power Adapter
BP-208 Battery Pack
STV-250N Stereo
Video Cable
PC-A10 SCART
Adapter*
(incl. power cord)
* Europe only.
Trademark Acknowledgements
is a trademark of DVD Format/Logo Licensing Corporation.
•
• Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• Other names and products not mentioned above may be trademarks or
registered trademarks of their respective companies.
•
ANY USE OF THIS PRODUCT OTHER THAN CONSUMER PERSONAL USE IN ANY MANNER THAT
COMPLIES WITH THE MPEG-2 STANDARD FOR ENCODING VIDEO INFORMATION FOR PACKAGED
MEDIA IS EXPRESSLY PROHIBITED WITHOUT A LICENSE UNDER APPLICABLE PATENTS IN THE
MPEG-2 PATENT PORTFOLIO, WHICH LICENSE IS AVAILABLE FROM MPEG LA, L.L.C., 250 STEELE
STREET, SUITE 300, DENVER, COLORADO 80206.
10
Components Guide
Left side view
Right side view
E
Front view
FUNC. button (
MENU button (
35)
31)
AV OUT terminal (
Serial number
BATTERY RELEASE switch (
RESET button ( 65)
Disc compartment cover (
DC IN terminal ( 15)
62)
Lens cover switch (
- open, - closed)
EXP (Exposure) switch (
DISPLAY button ( 30) (Multi Selector)
button (Multi Selector) ( 8)
FOCUS button ( 42) (Multi Selector)
WIDE SCR (Widescreen) button ( 23) /
PLAYLIST button ( 52)
22, 24)
15)
(
41) /
20)
Grip belt (
17)
Stereo microphone
***
(for
Buttons and switches other than (
MENU
) are indicated throughout the manual as
example,
).
11
Top view
Bottom view
Back view
Mode switch (
37)
25)
27)
LCD screen (
17)
Zoom lever (
(record review) button (
23) /
26) /
Speaker (
(fast reverse) button (
Index screen – button (
(fast forward) button (
Tripod socket (
23)
26)
OPEN (disc cover) switch (
Strap mount
20)
26) /
26)
Index screen + button (
26)
Viewfinder (
17)
D.EFFECTS button (
(play/pause) button (
(stop) button ( 26)
48) /
Dioptric adjustment lever (
Operating mode indicator (
17)
9)
/
Red
Red
/
(CAMERA),
DISC access indicator (
CHG. (charge) indicator (
22, 24) /
15)
(CAMERA),
Green
(PLAY)
Start/stop button (
22, 24)
Power switch (
9)
***
(for
Buttons and switches other than (
MENU
) are indicated throughout the manual as
example,
).
12
Screen Displays
Operating mode (
9)
Recording Movies
E
Recording program (
37)
Self timer (
44)
White balance (
Image effect (
Digital effects (
45)
47)
48)
Recording mode (
Disc type
36)
DVD-R,
DVD-RW (
4)
Disc specification
(VIDEO mode, VR mode) (
4)
Finalized disc mark (
Recording reminder
59)
Manual focus (
Image stabilizer (
Disc operation
42)
31)
Recording Still Images
Time code (hours : minutes : seconds)
Remaining recording time
Widescreen mode (
23)
Wind screen (
Level marker (
32)
33)
Zoom (
Metering mode (
Still image quality/size (
25), Exposure (
41)
41)
51)
Number of still images available
Remaining battery charge
AF frame (
Camcorder shake warning (
AF/AE locked during still image recording
43)
31)
(
24)
Recording reminder
Disc operation
The camcorder counts from 1 to 10
seconds when you start recording. This is
helpful to avoid scenes that are too short.
Record,
Playback,
Fast playback,
Record pause,
Playback pause,
Fast reverse playback,
Slow playback*,
Remaining recording time
When there is no more available disc
Slow reverse playback*
space, “
END” will be displayed and
* Only with a DVD-RW in VR mode.
the recording will stop.
13
Number of still images
Remaining battery charge
available
flashing in red: No disc
in green: 6 or more images
in yellow: 1 to 5 images
in red: No more images can be
recorded
• When “
” starts flashing in red
replace the battery pack with a fully
charged one.
• When viewing the still images, the
display will always be in green.
• Depending on the recording conditions,
the number of still images available
displayed may not decrease even after
a recording has been made, or may
decrease by 2 still images at once.
• When you attach an empty battery
pack, the power may turn off without
displaying “
”.
• Depending on the conditions under
which the camcorder and the battery
pack are used, the actual battery
charge may not be indicated accurately.
Playing Movies (Index Screen)
Current scene number / Total number of
scenes (
26)
Date and time of recording
Playing Movies (During Playback)
Disc operation
Playback time (hours : minutes : seconds)
Scene number
Data code (
30)
Viewing Still Images
Image number (
34)
Current image / Number of images
Still image size
Data code (
30)
14
Preparations
Getting Started
Step 1: Preparing the Power Supply
E
The camcorder can be powered with a battery pack or directly using the compact power
adapter. Charge the battery pack before use.
1. Turn off the camcorder.
CHG. (charge) indicator
2. Attach the battery pack to the
DC IN terminal
camcorder.
• Open the LCD panel.
• Slide in the connector end of the battery
in the direction of the arrow and press it
gently until it clicks.
3. Connect the power cord to the
compact power adapter.
4. Plug the power cord into a power
outlet.
5. Connect the compact power
adapter to the camcorder’s DC IN
terminal.
• The CHG. (charge) indicator starts
BATTERY
RELEASE
switch
flashing. The indicator will stay on when
the charging is completed.
before attaching the battery
Remove the battery terminal cover
• You can also use the compact power
adapter without attaching a battery pack.
• When the compact power adapter is connected, even if a battery is attached its
power will not be consumed.
Once the battery is fully charged:
1. Disconnect the compact power adapter from the camcorder.
2. Unplug the power cord from the power outlet and the compact power
adapter.
To remove the battery pack:
Slide down BATTERY RELEASE to release the battery pack, and pull out
the battery pack holding it from the ridge on its bottom part.
Charging, Recording and Playback Times with the BP-208 Battery Pack
The charging time of the BP-208 battery pack is 165 min.
The following recording and playback times are approximate and vary according to the
charging, recording or playback conditions.
15
Max.
Typical
Recording Mode
Playback Time
Recording Time Recording Time*
Viewfinder
XP LCD [NORMAL]
LCD [BRIGHT]
Viewfinder
80 min.
80 min.
75 min.
95 min.
90 min.
90 min.
105 min.
100 min.
95 min.
45 min.
45 min.
40 min.
50 min.
50 min.
45 min.
50 min.
50 min.
50 min.
85 min.
SP LCD [NORMAL]
LCD [BRIGHT]
Viewfinder
95 min.
LP LCD [NORMAL]
LCD [BRIGHT]
105 min.
* Approximate times for recording with repeated operations such as start/stop, zooming,
power on/off.
Turn off the camcorder before connecting or disconnecting the power adapter.
Do not connect to the camcorder’s DC IN terminal or to the compact power
adapter any electrical equipment that is not expressly recommended for use
with this camcorder.
You may hear some noise from the compact power adapter during use. This is
not a malfunction.
To prevent equipment breakdowns and excessive heating, do not connect the
supplied compact power adapter to voltage converters for overseas travels or
special power sources such as those on aircraft and ships, DC-AC inverters, etc.
We recommend charging the battery pack in temperatures between 10 C and
30 C. Outside the temperature range of 0 C to 40 C, the charging will not
start.
If you connect a faulty power adapter or battery pack, the CHG. (charge)
indicator flashes rapidly (approx. twice per second) and the charging stops.
The CHG. (charge) indicator also serves as a rough estimate of the battery
charge status.
Continuously on: Battery fully charged.
Flashes approx. twice per second: Battery over 50% charged.
Flashes approx. once per second: Battery less than 50% charged.
We recommend that you prepare battery packs 2 to 3 times longer than you
think you might need.
The charging time will vary depending on the surrounding temperature and the
battery pack’s initial charge condition.
In cold surroundings the usable time of the battery pack will decrease.
16
Step 2: Preparing the Camcorder
1. Turn on the camcorder.
2. Adjust the viewfinder.
Keep the LCD panel closed to use the viewfinder
and adjust the dioptric adjustment lever as
necessary.
E
3. Fasten the grip belt.
Adjust the grip belt so that you can reach the
zoom lever with your index finger, and the start/
stop button with your thumb.
Step 3: Adjusting the LCD Screen
MENU button
180
90
Subject can monitor the LCD screen
Rotating the LCD Panel
Open the LCD panel 90 degrees.
• You can rotate the panel downward by 90 degrees.
• You can rotate the panel by 180 degrees toward the lens (allowing the subject to
monitor the LCD screen while you use the viewfinder). Rotating the panel by 180
degrees is also useful if you wish to include yourself when recording with the self-timer.
LCD Backlight
You can switch the brightness of the LCD screen to [NORMAL] or [BRIGHT].
1. Press MENU .
2. Select (
3. Select (
4. Select (
) [DISPLAY SETUP] and press (
).
).
) [BACKLIGHT] and press (
).
) the desired option and press (
5. Press MENU to close the menu.
This setting does not affect the brightness of the recording or the viewfinder
screen.
Using the [BRIGHT] setting will shorten the effective usage time of the battery.
17
Step 4: Changing the Display Language
MENU
DISPLAY SETUP
LANGUAGE
ENGLISH
(
31)
Options
[DEUTSCH]
[ENGLISH]
[ESPAÑOL]
[FRANÇAIS]
[ITALIANO]
[POLSKI]
[
[
[
[
[
[
]
]
]
]
]
]
1. Press MENU .
2. Select (
3. Select (
4. Select (
) [DISPLAY SETUP] and press (
) [LANGUAGE ] and press (
).
).
,
) the desired option and press (
).
5. Press MENU to close the menu.
If you changed the language by mistake, follow the
to change the setting.
mark next to the menu item
Step 5: Setting the Time Zone / Daylight Saving Time
MENU
DATE/TIME SETUP
T.ZONE/DST PARIS
(
31)
1. Press MENU .
2. Select (
3. Select (
) [DATE/TIME SETUP] and press (
) [T.ZONE/DST] and press ( ).
).
The time zone setting appears. The default setting is Paris.
4. Select ( ) your time zone and press ( ).
To adjust for daylight saving time, select the time zone with the
area.
mark next to the
18
Time Zones
Once you have set the time zone, date and time, you do not need to reset the clock every
time you travel to another time zone. Select the time zone referring to the date and time
displayed on the screen.
E
Time Zones and Difference from GMT/UTC
London
Paris
GMT/UTC Wellington (WELLINGTN)
+12
-11
-10
-9
+1
+2
Samoa
Cairo
Honolulu
Moscow
Dubai
+3
Anchorage
+4
Los Angeles (L.A.)
Denver
-8
Karachi
Dacca
+5
-7
+6
Chicago
-6
Bangkok
Singapore
Tokyo
+7
New York
-5
+8
Caracas
-4
+9
Rio de Janeiro (RIO)
Fernando de Noronha (FERNANDO)
Azores
-3
Sydney
Solomon
+10
+11
-2
-1
Step 6: Setting the Date and Time
DATE/TIME 1.JAN.2006
MENU
31)
DATE/TIME SETUP
12:00 AM
(
1. Press MENU .
2. Select (
3. Select (
) [DATE/TIME SETUP] and press (
) [DATE/TIME] and press ( ).
).
The year is displayed in orange.
4. Select (
) the day and move ( ) to the month setting.
• The next part of the date/time is displayed in orange.
• Set the month, year, hours and minutes in the same way.
• If you do not need to change all settings, move (
to change.
) to a specific setting you want
5. Press MENU to close the menu and start the clock.
When you do not use the camcorder for about 3 months, the built-in
rechargeable lithium battery may discharge completely and the date and time
setting may be lost. In such case, recharge the built-in lithium battery (
and set the time zone, date and time again.
71)
You can also change the date format (
35).
19
Step 7: Loading and Removing a Disc
Use only 8 cm mini DVD discs marked with the DVD-R
or DVD-RW
logo.
Before inserting the disc be sure to check that the recording surface is clean. If
necessary, use a soft lens-cleaning cloth to remove any fingerprints, dirt buildup or
smudges from the disc surface.
Inserting the Disc
To change the operating mode, refer to About the Operating Modes (
9).
1. Move the power switch to ON to
set the camcorder in
mode.
2. Slide OPEN fully in the direction of
the arrow and gently open the disc
cover completely until it stops.
Retract the grip belt under the camcorder
so it will not get in the way of the disc
cover.
3. Insert the disc and press its center
firmly until it clicks in place.
• Insert the disc with the recording side
facing down (single sided discs - label
side facing out).
• Be careful not to touch the recording
surface of the disc or the pick up lens.
4. Close the disc cover.
Do not force the cover closed if the disc is
not correctly inserted and firmly set in
place.
When using DVD-R discs:
You can start recording movies once the record pause
indication appears.
When using a DVD-RW:
You need to initialize new discs before you can start recording. The disc initialization
screen will appear when a new DVD-RW is first inserted. It will not appear when inserting
a disc already initialized. In that case, you can start recording once the record pause
indication appears.
Select (
between the specifications [VIDEO] and [VR], see An Introduction to DVDs (
You will be asked to confirm the disc specification you selected. Select ( ) [YES]
and press ( ) to continue, or select [NO] and press ( ) to return and select a
different disc specification.
) the desired disc specification desired and press (
). For a comparison
4).
20
A confirmation message will appear on the screen. Select (
) to start the disc initialization.
) [YES] and press
(
• The disc initialization will take approximately one minute. Avoid moving the
camcorder while the operation is in progress.
E
• You can start recording movies once the record pause
indication appears.
The disc initialization screen may not appear automatically if you operated the
camcorder’s buttons while the disc recognition was in progress. In that case,
initialize the disc using the menu option (
55).
The process of recognizing a disc may take a moment. The
display will
move while the disc is being read. Wait until the camcorder finishes recognizing
the disc before you start recording.
Removing the Disc
1. Slide OPEN fully in the direction of the arrow and gently open the disc
cover completely until it stops.
• Do not subject the camcorder to strong impacts while the DISC access indicator is
on or flashing.
• Retract the grip belt under the camcorder so it will not get in the way of the disc
cover.
OPEN
• It may take a moment after pressing
for the disc cover to open.
2. Grab the edges of the disc and gently pull it out.
Be careful not to touch the recording surface of the disc or the pick up lens.
3. Close the disc cover.
OPEN
When you slide
after making a recording, additional important data is
recorded on the disc before the disc cover opens. While the DISC access indicator
is on or flashing do not subject the camcorder to shocks such as forcefully laying it
on a table.
21
Basic Functions
Recording
Recording Movies
Before You Begin Recording
Make a test recording first to check if the camcorder operates correctly. Since
recordings made on a DVD-R cannot be deleted, we recommend you use a DVD-RW
disc to make the test recordings.
To change the operating mode, refer to About the Operating Modes (
9).
1. Open the LCD panel and the lens
cover (move the lens cover switch
down to ).
2. Press Start/Stop to begin
recording.
Start/Stop
• Press
again to pause
recording.
• While recording and immediately after
pausing, the DISC access indicator may
go on while the scene is being recorded
on the disc.
When you have finished recording:
1. Remove the disc.
2. Turn off the camcorder.
3. Disconnect the power source and remove the battery pack.
4. Close the LCD panel and the lens cover (move the lens cover switch to
).
Avoid the following actions while the DISC access indicator is on or flashing.
Failing to do so may result in permanent data loss.
- Do not subject the camcorder to vibrations or strong impacts.
- Do not open the disc cover and do not remove the disc.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the operating mode.
About the recording time: By changing the recording mode you can change
the recording time available on the disc (
36).
When recording in bright places it may be difficult to use the LCD screen. In
such case, use the viewfinder instead.
When recording in very loud places (such as fireworks shows or concerts),
sound may become distorted or it may not be recorded at the actual levels. This
is not a malfunction.
About the Power Save mode: In order to save power when the camcorder is
powered by a battery pack, the camcorder will automatically shut off if left
without any operations for 5 minutes (
34). To restore the power, slide the
22
power switch towards MODE and release it, or move the power switch to
and back to ON.
About the LCD and viewfinder screen: The screens are produced using
extremely high-precision manufacturing techniques, with more than 99.99% of
the pixels operating to specification. Less than 0.01% of the pixels may
occasionally misfire or appear as black, red, blue or green dots. This has no
effect on the recorded image and does not constitute a malfunction.
When using a tripod: Do not leave the viewfinder
exposed to direct sunlight as it may melt (due to
E
concentration of the light by the lens). Do not use tripods
with fastening screws longer than 5.5 mm. Doing so may
damage the camcorder.
Reviewing the Last Scene Recorded
Press and release
(record review).
• The camcorder plays back the last scene and returns to record
pause mode.
• While reviewing the scene, select (
recording mode.
) the
icon and press (
) to return to the
• While reviewing a scene immediately after recording it, you can also delete the scene
by selecting ( ) the icon ( 53).
R
c
o
r
d
i
g
Selecting the Aspect Ratio of your Recordings
(16:9 Widescreen or 4:3)
You can select the aspect ratio of your recording to match your TV.
To change the operating mode, refer to About the Operating Modes (
Widescreen is not available when the recording mode is set to [LP] on a disc initialized in
VIDEO mode.
9).
Press WIDE SCR .
WIDE SCR
Repeatedly pressing
toggles between the Widescreen
(16:9) and normal (4:3) aspect ratios.
When recording in Widescreen mode, with [IMG STAB] set to [OFF] (
31),
you can have a wider view angle.
Playing back a Widescreen recording: TV sets compatible with the Video
ID-1 system will automatically switch to wide (16:9) mode. Otherwise, change
the aspect ratio of the TV manually. To play back on a TV with normal aspect
ratio (4:3) change the [TV TYPE] setting accordingly.
23
Recording Still Images
To use the still images functions, you will need to set [STILL IMAGES] to [ON]
beforehand (
9).
*
only. To change the operating mode, refer to About the Operating Modes (
9).
1. Open the LCD panel and the lens
cover (move the lens cover switch
down to ).
2. Press Start/Stop halfway.
Once the focus is automatically adjusted,
will turn green and one or more AF
frames appear.
3. Press Start/Stop fully.
The DISC access indicator will flash as
the image is being recorded.
Avoid the following actions while the disc access display
appears and while
the DISC access indicator is on or flashing. Failing to do so may result in
permanent data loss.
- Do not subject the camcorder to vibrations or strong impacts.
- Do not open the disc cover and do not remove the disc.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the operating mode.
Start/Stop
turns yellow. Keep
If the subject is not suitable for autofocus,
pressed halfway and adjust the focus manually with the multi selector (
).
24
Zooming
E
*
only. To change the operating mode, refer to About the Operating Modes (
: In addition to the 25x optical zoom, the 1000x ( ) /770x (
9).
)
digital zoom is also available (
31).
Zoom out
Zoom in
25x Optical Zoom
Move the zoom lever toward W to zoom out (wide-
angle). Move it toward T to zoom in (telephoto).
R
You can also change the zoom speed (
31). You can select one
c
o
of three fixed zoom speeds or a variable speed that depends on
how you operate the zoom lever: Press lightly for a slow zoom;
press harder for faster zooms.
r
d
i
g
Keep at least 1 m to the subject. At wide-angle, you can focus on a subject as
close as 1 cm.
When set to [VARIABLE], the zoom speed will be faster in the record pause
mode.
25
Playback
Playing Back Movies
To change the operating mode, refer to About the Operating Modes (
9).
The scene index screen appears with the selection frame on the first scene.
1. Move ( ) the selection
,
frame to the scene you want to
play back.
+
–
Press
or
to move to the next or
previous index page.
2. Press
/
to begin the playback.
• Playback of the scenes recorded on the
disc will start from the scene selected.
• When the end of the last movie recorded
is reached, playback will stop and the
camcorder will return to the scene index
screen.
During Playback:
3. Press
4. Press
/
again to pause the playback.
to stop the playback and return to the scene index screen.
To use the viewfinder, close the LCD panel.
About the screen display: During playback, the recording’s time code will be
displayed at the upper right corner of the screen in hours : minutes : seconds.
You can also choose to display instead the date and time when the scene was
recorded and additional recording data (
30).
As long as you don’t turn off the camcorder you can resume playback from the
point you stopped last.
Special Playback Modes
Fast Forward Playback /
Fast Reverse Playback
During normal playback, press
or
.
Repeatedly press the button to increase the
playback speed.
Fast forward: 1.5x → 5x → 15x → 25x the
normal speed.
Fast reverse: 2.5x → 5x → 15x → 25x the
normal speed.
Playback Pause
During normal playback, press
/
.
26
Slow Forward Playback /
During playback pause, press
playback speed.
Slow Reverse Playback
or
. Repeatedly press the button to increase the
Slow playback: 1/16 → 1/8 → 1/4 → 1/2 the normal speed.
E
Skipping Scenes
During normal playback, push the multi selector ( ) to skip to the beginning of the next
scene. Push the multi selector ( ) to return to the beginning of the current scene. Repeat
to skip to the beginning of the previous scene.
Except for fast playback at 1.5x the normal speed, there is no sound during
special playback modes.
The picture may become distorted during some special playback modes.
Slow playback is not available with discs initialized in VIDEO mode.
Depending on the recording, you might occasionally notice a brief stop of the
picture or sound at the point where the scene changes.
During the playback of a Photomovie scene, even though the display may
change according to the fast forward/reverse playback, the actual playback
speed will not change.
Adjusting the Volume
Pal
The camcorder plays the sound with the built-in speaker. The volume will be muted when
you close the LCD panel.
y
b
a
c
k
To change the operating mode, refer to About the Operating Modes (
MENU button
9).
Speaker
Multi selector
MENU
SYSTEM SETUP
VOLUME
(
31)
1. Press MENU .
2. Select (
3. Select (
4. Adjust (
) [SYSTEM SETUP] and press (
) [VOLUME] and press ( ).
) the volume as desired and press (
).
).
To turn off the volume completely, keep pressing ( ) until the volume icon changes to
.
5. Press MENU to save the setting and close the menu.
27
Viewing Still Images
To use the still images functions, you will need to set [STILL IMAGES] to [ON] beforehand
(
9).
: You can view still images already recorded on a disc (with another
camcorder). However, playback cannot be guaranteed for all still images.
To change the operating mode, refer to About the Operating Modes (
9).
Use the multi selector (
between images.
) to move
Multi selector
Some still images may not be displayed correctly.
Avoid the following actions while the DISC access indicator is on or flashing.
Failing to do so may result in permanent data loss.
- Do not subject the camcorder to vibrations or strong impacts.
- Do not open the disc cover and do not remove the disc.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the operating mode.
Slideshow
SLIDESHOW
(
35)
1. Press FUNC..
2. Select (
3. Select (
) [ SLIDESHOW] and press (
) [START] and press ( ) .
) .
• Images are played back one after another.
FUNC.
• Press
to stop the slideshow.
Index Screen
1. Move the zoom lever toward W.
The stills index screen appears with the first six still images.
2. Select (
,
) an image.
• Move the cursor
to the image you want to view.
+
–
• Press
or
to move to the next or previous index page.
3. Move the zoom lever toward T.
The index screen closes and the selected image is displayed.
28
Image Jump Function
You can also quickly locate a specific image without having to browse all of them one by
one.
E
Push the multi selector (
Image numbers will quickly run in sequence. When you release the multi selector the
) and keep it pressed down.
image corresponding to the number selected will be displayed.
Magnifying the Image
During playback, still images can be magnified up to 5 times.
To change the operating mode, refer to About the Operating Modes (
Zoom lever
9).
Pal
y
b
a
c
k
Multi selector
1. Move the zoom lever toward T.
• The image is magnified by 2 times and a frame appears indicating the position of the
magnified area.
• To further enlarge the image, move the zoom lever toward T. To reduce the
magnification to less than 2 times, move the zoom lever toward W.
•
will appear for images that cannot be enlarged.
2. Select the part of the image to be magnified with the multi selector.
• Move ( ) the frame to the part of the image you want to see enlarged.
,
• To cancel the magnification, move the zoom lever toward W until the frame
disappears.
29
Selecting the Recording Data Display
The camcorder keeps a data code containing the recording date and time and other
camera data such as shutter speed and exposure (f-stop).
To change the operating mode, refer to About the Operating Modes (
: [DATE], [TIME], [DATE&TIME] only.
9).
Data Code display
You can select the data code display style on the screen.
MENU
DISPLAY SETUP
DATA CODE
DATE & TIME
(
31)
Options
[
[
[
[
DATE]
TIME]
Displays the date or time when the scene or still image was
recorded.
DATE & TIME]
Displays both the date and time of the recording.
CAMERA DATA] Displays the exposure (f-stop) and shutter speed used when
recording the image.
[
CAM.& D/T]
Displays the exposure, shutter speed, date and time of the
recording.
Selecting the Data Code
1. Press MENU .
2. Select (
3. Select (
4. Select (
) [DISPLAY SETUP] and press (
) [DATA CODE] and press ( ).
) the desired option and press (
).
).
5. Press MENU to close the menu.
Turning the On-screen Displays On/Off
DISPLAY
During playback, repeatedly press
(
) to turn the
on-screen displays on/off in the following sequence:
All on-screen displays + data code display on
Only the data code display on
All on-screen displays off
30
Advanced Functions
Options Lists – MENU / FUNC.
Menu items not available appear in black on the screen. For details about how to select
an item, refer to Selecting an Option - MENU/FUNC. (
8).
E
only available with the
.
MENU Options
Camera Setup (Digital Zoom, Image Stabilizer, etc.)
CAMERA SETUP
A.SL SHUTTER.
ON], [ OFF]
[
The camcorder automatically uses slow shutter speeds to obtain brighter recordings in
places with insufficient lighting.
The camcorder uses shutter speeds down to 1/25 (1/12 when recording still images).
If a trailing afterimage appears, set the slow shutter to [OFF].
If “
” (camcorder shake warning) appears, we recommend stabilizing the camcorder,
for example, by mounting it on a tripod.
D.ZOOM
[
[
OFF], [
100X], [
100X], [
1000X]
770X]
OFF], [
Determines the operation of the digital zoom.
When activated, the camcorder will switch automatically to the digital zoom when you
zoom in beyond the optical zoom range.
With the digital zoom the image is digitally processed, so the image resolution will
deteriorate the more you zoom in.
The digital zoom indicator will appear in light blue from 25x up to 100x and dark blue
from 100x up to 1000x (
) /770x (
).
The digital zoom cannot be used with the [ NIGHT] recording program (
) or with
the multi-image screen.
ZOOM SPEED
[
VARIABLE], [
When set to [
lever: Press lightly for a slow zoom; press harder for faster zooms.
The fastest zoom speed can be achieved with [ VARIABLE]. Among the fixed
SPEED 1] the slowest.
SPEED 3], [
SPEED 2], [
SPEED 1]
VARIABLE] the zoom speed depends on how you operate the zoom
zoom speeds, [
SPEED 3] is the fastest and [
IMG STAB
[
ON
], [
OFF]
The image stabilizer compensates for camcorder shake even at full telephoto.
The image stabilizer is designed to compensate for a normal degree of camcorder
shake.
The image stabilizer may not be effective when recording in dark places using the
[
NIGHT] recording program (
).
The image stabilizer cannot be turned off when the mode switch is set to
.
31
FOCUS PRI.
[
ON], [
OFF]
The camcorder records the still image only after the focus has been adjusted.
Set it to [
Start/Stop
OFF] if you wish to record a still image as soon as you press
. When set to [
OFF], no focusing frame appears.
Focus priority cannot be turned off when the mode switch is set to
In the [ FIREWORKS] recording program ( ) the setting is automatically set to
OFF].
.
[
WIND SCREEN
ON ], [
[
OFF]
When activated, the camcorder will reduce the background sound of wind when recording
outdoors.
Set the mode switch to a position other than
.
Some low-frequency sounds will be suppressed along with the sound of wind. We
recommend to leave the wind screen [
OFF] for most recording environments.
44)
(
SELF TIMER
[
ON ], [
OFF]
Still Image Operations (Erase All Images)
STILL IMG OPER.
ERASE ALL IMAGES
(
57)
[NO], [YES]
Disc Operations (Photomovie, Finalize, etc.)
DISC OPERATIONS
DISC INFO
Displays a screen where you can verify the details regarding the disc.
The disc information includes the disc title, the disc type (DVD-R or DVD-RW), the disc
specification (VIDEO mode or VR mode), and icons that indicate if the disc is finalized
(
) or protected (
).
(
(
(
55)
59)
61)
DISC INITIALIZE
[VIDEO], [VR]
FINALIZE
[NO], [YES]
UNFINALIZE
[NO], [YES]
MOVIES ALL DEL
(
53)
[NO], [YES]
This option is available only in the original index screen.
32
(
53)
PLAYLST ALL DEL
[NO], [YES]
This option is available only in the playlist index screen.
E
(
55)
DISC PROTECT
[NO], [YES]
PHOTOMOVIE
(
58)
[NO], [YES]
DISC TITLE
Display Setup (LCD Brightness, Language, etc.)
(
56)
DISPLAY SETUP
BRIGHTNESS
Adjusts the brightness of the LCD screen.
Use the multi selector (
) to adjust the brightness to your preference.
Changing the brightness of the LCD screen does not affect that of the viewfinder or the
recordings.
BACKLIGHT
(
17)
[
NORMAL], [
BRIGHT]
LCD MIRROR
[
ON], [
OFF]
When you rotate the LCD panel 180 degrees to face the subject, the picture displayed will
be a mirror image (right and left reversed) so that the image on the display will match that
of the subject. All on-screen displays will also be reversed.
DATA CODE
(
30)
DATE], [ TIME], [
30)
[
[
DATE & TIME], [
CAMERA DATA], [
CAM. & D/T]
(
DATE], [ TIME], [
DATE & TIME]
LEVEL MARKER
[
ON], [
OFF]
A horizontal line will appear at the center of the screen. You can frame the picture by
referring to the level marker.
(
18)
LANGUAGE
[DEUTSCH], [ENGLISH], [ESPAÑOL], [FRANÇAIS], [ITALIANO], [POLSKI],
[
], [
], [
], [
], [
], [
]
33
DEMO MODE
[
ON], [
OFF]
The demonstration mode displays the camcorder’s main features. It starts automatically
when the camcorder is powered with the power adapter if you leave it turned on without
loading a disc for more than 5 minutes.
To cancel the demo mode once it started, press any button, turn off the camcorder or
load a disc.
System Setup (Volume, Beep, etc.)
SYSTEM SETUP
STILL IMAGES
(
9)
[
ON], [
OFF]
VOLUME
(
27)
BEEP
[
HIGH VOLUME], [
LOW VOLUME], [
OFF]
A beep will accompany some operations like turning on the camcorder, the self-timer
countdown, etc. It also serves as a warning beep under unusual conditions.
FIRMWARE
You can check the current version of the camcorder’s firmware.
POWER SAVE
[
ON], [
OFF]
In order to save power when the camcorder is powered by a battery pack, it will
automatically shut off if left without any operation for five minutes. Approximately 30
seconds before the camcorder shuts off, the message “
appear.
AUTO POWER OFF” will
FILE NOS.
[
RESET], [
CONTINUOUS]
Select the image numbering method to be used on a new disc.
Images are automatically assigned consecutive image numbers from 0101 to 9900, and
stored in folders containing up to 100 images. Folders are numbered from 101 to 998.
[RESET]: Image numbering will start anew from 101-0101 every time you insert a new
disc. If it already contains image files, a new image will be given the number following that
of the last image on the disc.
[CONTINUOUS]: Image numbering will start from the number following that of the last
image recorded with the camcorder. If the disc already contains an image with a larger
image number, a new image will be given the number following that of the last image on
the disc. This numbering method is useful for organizing images on a computer. We
recommend using this setting.
34
TV TYPE
NORMAL TV], [
[
WIDE TV]
In order to display the picture in full and in the correct aspect ratio, select the setting
according to the type of television to which you will connect the camcorder.
E
[NORMAL TV]: TV sets with 4:3 aspect ratio.
[WIDE TV]: TV sets with 16:9 aspect ratio.
Date/Time Setup
DATE/TIME SETUP
(
(
18)
19)
T.ZONE/DST
DATE/TIME
DATE FORMAT
[Y.M.D (2006.1.1 AM 12:00)], [M.D,Y (JAN. 1, 2006 12:00 AM)], [D.M.Y (1.JAN.2006
12:00 AM)]
FUNC. Menu Options
Recording programs
(
37)
Mode switch:
[
PROGRAM AE], [
SHUTTER-PRIO. AE], [
APERTURE-PRIO. AE]
Mode switch:
[
PORTRAIT], [ SPORTS], [ NIGHT], [ SNOW], [ BEACH], [ SUNSET],
[
SPOTLIGHT], [ FIREWORKS]
Light metering mode
Mode switch:
(
41)
[
EVALUATIVE], [
CENT.WEIGHT.AVERAGE], [
SPOT]
45)
White balance
(
Mode switch:
[
[
AUTO], [ DAYLIGHT], [ SHADE], [ CLOUDY], [ TUNGSTEN],
FLUORESCENT], [ FLUORESCENT H], [ SET]
Image effect
(
47)
Mode switch:
[
[
IMAGE EFFECT OFF], [ VIVID], [ NEUTRAL], [ LOW SHARPENING],
SOFT SKIN DETAIL], [ CUSTOM]
Digital effects
Mode switch:
(
48)
*
[
D.EFFECT OFF], [ FADER], [ EFFECT], [ MULTI-S]
* Not available while using the [ NIGHT] recording program.
35
(
48)
BLK&WHT]
[
D.EFFECT OFF], [
Recording mode
HIGH QUALITY], [ STANDARD PLAY], [ LONG PLAY]
[
Approximate recording times with a brand new DVD-R disc are as follows:
XP: 20 minutes, SP: 30 minutes, LP: 60 minutes.
Recording in LP mode gives you a longer recording time; however, depending
on the condition of the disc (long usage, imperfections, etc.) the picture and
sound recorded in LP mode may be distorted. We recommend using the XP or
SP mode for important recordings.
Depending on the recording mode, you might occasionally notice a brief stop of the
picture or sound at the point where the scene changes.
The camcorder uses a variable bit rate (VBR) when encoding the video data so the
actual recording times will vary depending on the content of the scenes.
Still image size/quality
1024x768], [ 640x480]
Quality: [ SUPER FINE], [ FINE], [ NORMAL]
(
51)
Size: [
L
S
Add to playlist
[ALL SCENES], [ONE SCENE], [CANCEL]
This option is available only from the original index screen.
(
52)
Move a scene
(
52)
This option is available only from the playlist index screen.
(
(
54)
53)
Divide a scene
Delete a scene
Convert to scene
(
58)
Image erase
(
57)
: This option will appear only when you press
reviewing the still image immediately after recording it.
FUNC.
while
(
28)
Slideshow
[CANCEL], [START]
36
Recording Programs
Using the Recording Programs
E
*
only. To change the operating mode, refer to About the Operating Modes (
9).
Auto
The camcorder adjusts focus, exposure and
other settings automatically, allowing you to just
point and shoot.
Program AE (
38)
Shutter-Priority AE (
Aperture-Priority AE (
39)
40)
Portrait
Snow
Spotlight
Use this mode to record
spotlit scenes.
The camcorder uses a large
aperture, achieving a focus
on the subject while blurring
other distracting details.
Use this mode to record in
bright ski resorts. It prevents
the subject from being
underexposed.
Re
c
r
d
i
g
P
o
g
r
a
Sports
Use this mode to record
Beach
Fireworks
m
s
Use this mode to record on a Use this mode to record
sports scenes such as tennis sunny beach. It prevents the fireworks.
or golf.
subject from being
underexposed.
Night
Use this mode to record in
poorly lit places.
Sunset
Use this mode to record
sunsets in vibrant colors.
37
Selecting the Recording Program
*
only. To change the operating mode, refer to About the Operating Modes (
9).
Move the mode switch between the recording categories.
Automatic mode
Select [ PROGRAM AE], [
Select [ PORTRAIT], [ SPORTS], [ NIGHT], [ SNOW], [ BEACH],
SUNSET], [ SPOTLIGHT], [ FIREWORKS]
SHUTTER-PRIO. AE], [
APERTURE-PRIO. AE]
[
To select a recording program after choosing
:
Recording Program icon
FUNC.
Desired option
FUNC.
Do not change the recording program while recording as the brightness of the
image may change abruptly.
[ PORTRAIT]
- The blur effect of the background increases the more you zoom in (T).
- The picture may not appear smooth when played back.
[ SPORTS]
- The picture may not appear smooth when played back.
[ SNOW]/[ BEACH]
- The subject may become overexposed on cloudy days or in shaded places.
Check the image on the screen.
- The picture may not appear smooth when played back.
[ FIREWORKS]
- To avoid camcorder shake, we recommend using a tripod.
: Make
sure to use a tripod especially in
down.
, as the shutter speed slows
Using the Program AE Mode
The camcorder automatically adjusts the aperture and shutter speed according to the
subject to achieve the best exposure conditions. With [ PROGRAM AE], you can point
and shoot as in
settings.
mode, while still enjoying the option to manually adjust some
*
only. To change the operating mode, refer to About the Operating Modes (
9).
Mode switch:
Select the recording program [ PROGRAM AE] as
described in Selecting the Recording Program (
38).
38
If the optimal exposure cannot be obtained, try the following actions.
Manually adjust the exposure (
Change the metering method (
41).
41).
E
Using the Shutter-Priority AE Mode
You can select a shutter speed, and the camcorder automatically sets the aperture setting
most appropriate for the subject. Select a high shutter speed for recording fast moving
subjects, and a slow shutter speed to add a motion blur to moving objects, enhancing the
feel of movement of the image.
*
only. To change the operating mode, refer to About the Operating Modes (
9).
Mode switch:
Shutter speed guideline
1/6, 1/12,
1/25
1/2, 1/3, 1/6,
1/12, 1/25
For recording subjects in dark places.
1/50
1/50
For general recordings.
1/120
1/120
For recording indoor sports scenes.
For recording from within a car or train, or for
recording moving subjects such as roller coasters.
Re
1/250, 1/500,
1/1000
1/250, 1/500
o
r
d
1/2000
For recording outdoor sports such as golf or tennis
on sunny days.
i
–
g
P
o
g
1. Select the recording program
SHUTTER-PRIO.AE] as described in Selecting
r
a
m
s
[
the Recording Program (
2. Press ( ).
3. Change (
38).
) the shutter speed and press (
) to save the setting.
The shutter speed denominator flashes when the selected shutter speed is not
appropriate for the recording condition. In such case, readjust the shutter
speed.
When using a slow shutter speed in dark places, you can obtain a brighter
image, but the image quality may be lower, and the autofocus may not work
well.
Do not point the camcorder directly at the sun when the shutter speed is set to
1/1000 or higher.
The image may flicker when recording with high shutter speeds.
39
Using the Aperture-Priority AE Mode
You can select an aperture value, and the camcorder automatically sets the shutter speed
most appropriate for the subject. Use low aperture values (large aperture) to blur the
background for a portrait, or high aperture values (small aperture) to achieve a broad
depth of field for recording landscapes.
*
only. To change the operating mode, refer to About the Operating Modes (
9).
Mode switch:
Aperture value guideline
[1.8], [2.0], [2.4], [2.8], [3.4], [4.0], [4.8], [5.6], [6.7], [8.0], [9.5], [11], [14], [16]
large ← aperture size → small
1. Select the recording program
[
APERTURE-PRIO.AE] as described in Selecting
the Recording Program (
2. Press ( ).
3. Change (
38).
) the aperture value and press (
) to save the setting.
Available aperture values vary depending on the zoom position.
The aperture value flashes when the selected aperture is not appropriate for the
recording condition. In such case, readjust the aperture.
40
More Recording Options
Manually Adjusting the Exposure
Adjust the exposure when a subject is underexposed (for example, when backlit subjects
appear too dark in the image) or overexposed (for example, when recording subjects
under very strong light and they appear too bright or glaring in the image).
E
*
only. To change the operating mode, refer to About the Operating Modes (
9).
Mode switch: (except for the [ FIREWORKS] recording program).
1. Press EXP ( ).
• The exposure adjustment indicator
and the neutral
value “ 0” appear on the screen.
• If you operate the zoom during exposure lock, the brightness
of the image may change.
2. Adjust (
) the brightness of the image as required.
• The adjustment range depends on the brightness of the picture at the time you
locked the exposure.
• Pressing
(
) again will cancel the exposure lock and return the camcorder to
EXP
the previous setting.
Changing the Metering Method
You can select the light metering mode.
Mo
r
R
e
c
o
r
d
*
only. To change the operating mode, refer to About the Operating Modes (
9).
i
n
gO
Mode switch:
p
t
o
EVALUATIVE
n
s
(
35)
Options
[
EVALUATIVE]
Appropriate for standard shooting conditions, including
backlit scenes. The camcorder divides the picture into
several zones for light metering and evaluates
complex lighting conditions for the optimal exposure of
the subject.
[
[
CENT.WEIGHT.AVERAGE] Averages the light metered from the entire screen,
giving more weight to the subject in the center.
SPOT]
Meters the area within the spot AE point frame. Use
this setting to adjust the exposure to match the subject
in the center of the screen.
FUNC.
FUNC.
Metering Method icon
Desired option
41
Manually Adjusting the Focus
Autofocus may not work well on the following subjects. In such case, focus manually.
Subjects with low
contrast or without
vertical lines
Through
dirty or wet
windows
Reflective
surfaces
Fast Moving
Subjects
Night Scenes
*
only. To change the operating mode, refer to About the Operating Modes (
9).
Mode switch:
1. Adjust the zoom.
2. Press FOCUS ( ).
“MF” appears.
3. Adjust (
appears focused.
Pressing FOCUS
) the focus as required until the image
(
) again will return to autofocus.
The camcorder will automatically return to autofocus when you set the mode
switch to
Readjust the focus when you have turned off the camcorder.
.
Infinity Focus
Use this function when you wish to focus on faraway subjects such as mountains or
fireworks.
1. Adjust the zoom.
2. Keep FOCUS ( ) pressed down for more than 2 seconds.
• “ ” appears.
• Pressing
(
) again will return to autofocus.
FOCUS
If you operate the zoom or the multi selector (
) during infinity focus, “
”
changes to “MF” and the camcorder returns to manual focusing mode.
42
Changing the Autofocus Mode
You can change the AF (autofocus) frame selection mode.
E
*
only. To change the operating mode, refer to About the Operating Modes (
9).
Options
9 Point AiAF
Mode switch:
*
Depending on the shooting conditions, one or more AF
frames out of the nine frames available are automatically
selected and focused on.
Four framing corners will appear on the screen when making
the selection; the corners do not appear while actually
recording.
Center point
Mode switch:
The center AF frame is selected to focus. This is convenient
for making sure the focus is exactly where you want it.
A single focusing frame appears in the center of the screen
when making the selection; the frame will appear also while
actually recording.
*
* Except for the [ FIREWORKS] recording program.
Select (
) the autofocus mode.
Mo
r
R
e
c
o
r
d
i
n
gO
p
t
o
n
s
43
Using the Self Timer
*
only. To change the operating mode, refer to About the Operating Modes (
: Set the camcorder in record pause mode.
9).
MENU
MENU
CAMERA SETUP
SELF TIMER
ON
“
” appears.
:
Press Start/Stop .
The camcorder starts recording after a 10-second countdown. The countdown appears
on the screen.
:
Press Start/Stop , first halfway to activate the autofocus and then fully
to record the still image.
The camcorder will record the still image after a 10-second countdown. The countdown
appears on the screen.
Start/Stop
Once the countdown has begun, you can also press
to cancel the
self timer. The self timer will be canceled if you turn off the camcorder.
44
Setting the White Balance
You can choose one of the preset settings to reproduce colors more accurately, or set a
custom white balance to obtain the setting best suited to your specific recording
conditions.
E
*
only. To change the operating mode, refer to About the Operating Modes (
9).
Mode switch:
AUTO
(
35)
Options
[
AUTO]
Settings are automatically set by the camcorder. Use this
setting for outdoor scenes.
[
[
[
[
DAYLIGHT]
SHADE]
For recording outdoors on a bright day.
For recording in shaded places.
For recording on a cloudy day.
CLOUDY]
TUNGSTEN]
For recording under tungsten and tungsten type
(3-wavelength) fluorescent lighting.
[
[
[
FLUORESCENT]
For recording under warm white, cool white or warm white
type (3-wavelength) fluorescent lighting.
Mo
r
FLUORESCENT H] For recording under daylight or daylight type (3-wavelength)
fluorescent lighting.
R
e
c
o
SET]
Use the custom white balance setting to make white subjects
appear white under colored lighting.
r
d
i
n
gO
p
FUNC.
FUNC.
White Balance icon
Desired option*
t
o
n
s
* To set the custom white balance when you select [ SET]:
1. Point the camcorder at a white object, zoom in until it fills the whole
screen and press (
).
Keep the camcorder zoomed at the white object until
stops flashing.
2. Press FUNC. to save the setting and close the menu.
Depending on the type of fluorescent light, optimal color balance may not be
obtained with [ FLUORESCENT] or [ FLUORESCENT H]. If the color looks
unnatural, adjust it using [ AUTO] or [ SET].
When you have set the custom white balance:
- Depending on the light source,
may keep flashing. The result will still be
better than with [ AUTO].
- Reset the white balance when the lighting condition changes.
- Turn off the digital zoom.
The camcorder retains the custom white balance setting even if you turn it off.
45
Custom white balance may provide better results in the following cases:
- Changing lighting conditions
- Close-ups
- Subjects in a single color (sky, sea or forest)
- Under mercury lamps and certain types of fluorescent lights
46
Applying Image Enhancing Effects
You can record with different color saturation and contrast effects.
E
*
only. To change the operating mode, refer to About the Operating Modes (
9).
Mode switch:
IMAGE EFFECT OFF
(
35)
Options
[
[
[
[
[
IMAGE EFFECT OFF] Records with no image enhancing effects.
VIVID]
Emphasizes the contrast and color saturation.
Tones down the contrast and color saturation.
Records subjects with softened outlines.
NEUTRAL]
LOW SHARPENING]
SOFT SKIN DETAIL]
Softens the details in the skin tone area for a more
complimentary appearance. To obtain the best effect, use
this setting when recording a person in close-up. Note that
areas similar to the skin color may lack in detail.
[
CUSTOM]
Allows you to adjust the brightness, contrast, sharpness,
and color depth of the image.
Mo
[BRIGHTN.]:
(–) Darker picture,
(+) Brighter picture
r
R
[CONTRAST]: (–) Flatter picture,
(+) More defined light and shade
e
c
o
r
d
[SHARPNESS]: (–) Vaguer outlines,
(+) Sharper outlines
i
n
gO
p
[COL.DEPTH]: (–) Shallower colors,
(+) Richer color tonality
t
o
n
s
Image Effect icon
FUNC.
FUNC.
* To set the custom image effect when you select [
*
Desired option
CUSTOM]:
1. Press ( ) and select ( ) the custom setting options: [BRIGHTN.],
[CONTRAST], [SHARPNESS] or [COL.DEPTH].
2. Adjust (
) each setting as desired and then press (
) .
3. Press FUNC. to save the setting and close the menu.
47
Using the Digital Effects
[
FADER] Faders
Begin or end scenes with a fade to or from black. You can preview the effect on the
display.
[FADE-T]
[WIPE]
[CORNER]
(fade trigger)
(corner wipe)
[JUMP]
[FLIP]
[PUZZLE]
[TIDE]
[ZIGZAG]
[BEAM]
[
EFFECT] Effects
Add flavor to your recordings. Sound will be recorded normally. You can preview the effect
on the display.
[BLK&WHT]
[SEPIA]
[ART]
(black and white)
[MOSAIC]
[WAVE]
[BALL]
[CUBE]
[COLOR M.]
(color mask)
[MIRROR]
[
MULTI-S] Multi-Image Screen (
49)
Captures moving subjects as a sequence of 4, 9 or 16 still images and displays them as
one split screen. Sound will be recorded normally.
4 split images
9 split images
16 split images
When you are not using the digital effect, select [ D.EFFECT OFF].
Selecting a Fader / Effect
*
only. To change the operating mode, refer to About the Operating Modes (
9).
Mode switch:
: [ BLK&WHT] only.
D.EFFECT OFF
(
35)
48
Setting
FUNC.
Digital Effects icon
E
FADER
/ EFFECT
Press (
)
Desired fader/effect.
Press ( )*
FUNC.
**
* You can preview the effect on the screen before pressing (
** The selected effect icon appears.
).
Applying
1. Press D.EFFECTS to activate the fader/effect.
D.EFFECTS
• To fade in, press
before you start recording, then
Start/Stop
press
to start recording.
D.EFFECTS
Start/Stop
to
• To fade out, press
while recording, then press
pause the recording.
2. Press D.EFFECTS again to deactivate the fader/effect.
The camcorder retains the setting last used even if you turn off the digital effects
or change the recording program.
Mo
r
Using the Multi-Image Screen
R
e
c
o
r
d
i
n
To change the operating mode, refer to About the Operating Modes (
9).
gO
p
Mode switch:
(except for the [ NIGHT] recording program).
t
o
n
s
D.EFFECT OFF
(
35)
Options
[S.SPEED] Select how fast the images will be captured.
[MANUAL]: One image will be added to the split screen every time you
D.EFFECTS D.EFFECTS
press
. Hold
pressed down for
more than 1 second to delete images from the split screen.
[FAST]:
[MOD.]:
[SLOW]:
Every 4 frames
Every 6 frames
Every 8 frames
[S.SPLIT] Select how many images in the split screen: [4], [9], [16].
49
Setting
FUNC.
Digital Effects icon
MULTI-S
Press (
)
(
(
)
)
S.SPEED
S.SPLIT
)
, (
, (
) Desired transition speed
) Desired number of images
FUNC.
Press (
“
” appears.
Applying
1. Press D.EFFECTS to capture the images.
2. Press Start/Stop to record the multi-image
screen displayed.
50
Selecting the Size and Quality of
Still Images
E
Still images are recorded on the disc using the JPEG (Joint Photographic Experts Group)
compression. As a general rule select a larger image size for higher quality.
*
(
only. To change the operating mode, refer to About the Operating Modes (
1024x768/FINE
9).
L
35)
Options and number of still images that can be recorded on a disc:
Number of Images
Image Size
1024x768
Image Quality
VIDEO Mode
(DVD-R/-RW)
VR Mode
(DVD-RW)
L
S
[
[
[
[
[
[
SUPER FINE]
FINE]
3130
4530
8610
7825
9999
9999
3135
4540
NORMAL]
SUPER FINE]
FINE]
8630
640x480
7845
(11510)*
(19185)*
NORMAL]
Mo
* This number is the number of images that can be recorded on the disc; however, the
maximum number of remaining images displayed on the screen will be 9999.
r
R
e
c
o
Image Size icon
FUNC.
r
d
i
n
gO
Desired image size*
p
t
o
Press (
)
n
s
FUNC.
Desired image quality*
* The number displayed on the right corner indicates the approximate number of images that
can be recorded with the current quality/size setting.
51
Editing Functions
Editing the Scenes
(DVD-RW in VR mode only)
Creating a Playlist
Create a playlist to easily edit your movies (for example, change the order in which the
scenes you recorded will be played back or edit scenes including only the best parts and
cutting out the rest) without affecting your original recordings. After you add scenes to the
playlist you will have two types of index screens: The original index screen (for the
original recordings) and the playlist index screen.
To change the operating mode, refer to About the Operating Modes (
Disc type: DVD-RW initialized in VR mode.
9).
Adding Scenes to the Playlist
Options
[ALL SCENES]
[ONE SCENE]
[CANCEL]
Adds all scenes in the original index screen to the playlist.
Adds only the selected scene to the playlist.
Returns to the original index screen.
From the original index screen, select (
,
) the scene to add to the playlist. To add
all scenes there is no need to select any particular scene.
ADD TO PLAYLIST
Desired option
YES
FUNC.
When the operation is completed “ADDED TO PLAYLIST” will be
PLAYLIST
displayed. Press
index screen.
to check the scenes in the playlist
Moving Scenes in the Playlist
PLAYLIST
From the original index screen, press
. From the playlist index screen, select
(
,
) the scene to move.
FUNC.
MOVE
Move (
,
) the orange marker to the new
position of the scene and press ( ).
YES
52
Deleting Scenes
You can delete those scenes that you are not interested in keeping. Remember that when
you delete scenes in the playlist, you do not affect your original recordings; However,
when you delete an original recording, it will be deleted also from the playlist.
E
Be careful when deleting original recordings. Once deleted, an original scene
cannot be recovered.
Do not change the operating mode while the scene is being deleted.
Scenes cannot be deleted when the disc is protected (
55).
You may not be able to delete scenes shorter than 5 seconds.
Deleting a Single Scene
To change the operating mode, refer to About the Operating Modes (
9).
Disc type:
DVD-RW initialized in VR mode.
From the original index screen, select (
,
) the scene to delete. To delete a scene
PLAYLIST
only in the playlist, press
first, and then select the scene.
DELETE
FUNC.
YES
Deleting a Scene Just After Recording
As long as you have not turned the camcorder off or changed the operating mode after
recording a scene, you can delete it while reviewing it.
E
d
i
t
i
n
g
teh
To change the operating mode, refer to About the Operating Modes (
Disc type: DVD-RW discs (VIDEO or VR mode).
9).
S
c
en
1. Immediately after recording a scene, press
(record review).
es(
D
V
D
2. While reviewing the scene, select (
3. Select ( ) [YES] and press ( ).
)
and press (
).
-
W
i
n
Deleting All Scenes
V
R
mo
de
oln
To change the operating mode, refer to About the Operating Modes (
Disc type: DVD-RW initialized in VR mode.
9).
y)
To delete all the scenes from the original index screen follow the procedure below. This
will delete also the whole playlist. If you only want to delete all the scenes from the playlist
PLAYLIST
(without affecting the original recordings), press
follows.
first and then continue as
53
MENU
MENU
DISC OPERATIONS
MOVIES ALL DEL
YES
*
* When you are deleting the playlist, this menu option will be replaced by [PLAYLST ALL DEL].
Dividing a Scene
You can divide your recordings in order to leave only the best parts and later cut out the
rest. Remember that when you divide scenes in the playlist, you do not affect your original
recordings.
Photomovie scenes and scenes created by converting single still images (
cannot be divided.
58)
To change the operating mode, refer to About the Operating Modes (
Disc type: DVD-RW initialized in VR mode.
9).
From the original index screen, select (
,
) the scene to divide. To divide a scene
PLAYLIST
only in the playlist, press
first, and then select the scene.
FUNC.
DIVIDE
Playback of the scene begins. Press ( ) at the
point where you want to divide the scene. *
DIVIDE
YES
* You can use the following icons and the special playback modes (
a precise point.
26) to bring the scene to
/
: Skip to the beginning of the current/next scene.
One frame reverse/advance.
/
:
54
Disc Options
Protecting the Disc
E
You can protect the whole disc to prevent the accidental erasure of important recordings.
Initializing the disc (
protected.
55) will permanently erase all recordings, even if the disc is
To change the operating mode, refer to About the Operating Modes (
9).
Disc type:
DVD-RW initialized in VR mode.
DISC OPERATIONS
MENU
DISC PROTECT
YES
MENU
Initializing the Disc
You need to initialize a DVD-RW disc when first inserting it into the camcorder and you
may have to initialize a disc if you get the “DISC ERROR” message. You can also choose
to initialize the disc if you wish to erase all the recordings on the disc or in order to change
the disc specification.
Avoid moving the camcorder while the operation is in progress.
Initializing the disc will permanently erase all recordings, even if the disc is
protected. The lost original recordings cannot be recovered.
The disc initialization will take approximately one minute.
DsicOp
Disc type:
Options
VIDEO mode
DVD-RW discs (VIDEO or VR mode).
toin
s
Most DVD players will play the disc, but except for the disc title, the
recordings cannot be edited with the camcorder.
VR mode
You will have the option to edit the recordings with the camcorder, but the
disc can only be played in VR mode-compatible DVD players and
computer DVD drives.
MENU
DISC OPERATIONS
DISC INITIALIZE
VIDEO
YES
/ VR
*
MENU
YES
* Close the menu only after the screen display returns to the [DISC OPERATIONS] menu.
55
Changing the Disc Title
Before you finalize your disc, you can give it a title. The disc title will be displayed on the
index screen when playing the finalized disc in most DVD players.
To change the operating mode, refer to About the Operating Modes (
9).
MENU
DISC OPERATIONS
DISC TITLE
Enter the title (up to 20 characters).*
SET
YES
MENU
* Select one character at a time and press (
) to add it to the title. Select [BACKSPACE] and
press (
) to delete the last character.
56
Still Image Options
Erasing Still Images
Be careful when erasing images. Erased images cannot be recovered.
E
Still images on a protected disc cannot be erased.
Erasing a Single Image
To change the operating mode, refer to About the Operating Modes (
9).
Disc type:
DVD-RW initialized in VR mode.
FUNC.
IMAGE ERASE
FUNC.
ERASE
Erasing a Single Image Just After Recording
You can erase the still image you recorded last, while you are reviewing the image
immediately after recording it.
*
only. To change the operating mode, refer to About the Operating Modes (
Disc type: DVD-RW discs (VIDEO or VR mode).
While reviewing the image immediately after recording:
9).
S
t
i
l
l
I
m
IMAGE ERASE
FUNC.
FUNC.
a
e
O
p
ERASE
t
o
n
s
Erasing All Images
To change the operating mode, refer to About the Operating Modes (
9).
Disc type:
DVD-RW initialized in VR mode.
MENU
STILL IMG OPER.
ERASE ALL IMAGES
YES
MENU
57
Converting Still Images into
Photomovie Scenes
Still images are recorded using JPEG compression, but a DVD player only recognizes the
MPEG standard. Thus, to play back your still images with your DVD player, first you need
to create a Photomovie scene – a slide show of all still images on the disc, where each
image will be displayed for approx. 3 seconds.
*
only. To change the operating mode, refer to About the Operating Modes (
9).
Converting a Single Image
Select (
) the still image you want to convert to a scene.
FUNC.
CONVERT TO SCENE
EXECUTE
FUNC.
Converting All Images
MENU
DISC OPERATIONS
PHOTOMOVIE
MENU
YES
This function does not affect the original still images.
If the disc becomes full while creating a Photomovie scene, the operation will be
canceled.
58
Disc Finalization
Preparing your Disc for Playing on a
DVD Player – [FINALIZE]
E
To play the disc you recorded on a DVD player, a computer’s DVD drive or other digital
device, you need to finalize it first. You do not need to finalize the disc to play back your
recordings with the camcorder connected to the TV.
To view your still images on a DVD player you will need to convert them to
Photomovie scenes beforehand (
58).
Be sure to finalize the disc in normal room temperatures. If the procedure
was not completed correctly due to high temperature, let the camcorder
cool off before resuming operation.
Place the camcorder on a table or other stable surface before starting the
procedure. Subjecting the camcorder even to slight impacts (for example
to place it on a table or to disconnect the AV cable) after the finalization
process started may result in permanent data loss.
Always power the camcorder using the compact power adapter. The operation
cannot be started if the camcorder is powered only with the battery pack.
Avoid the following actions while the operation is in progress. Failing to do so
can interrupt the process and result in permanent data loss.
- Do not move the camcorder.
- Do not disconnect the compact power adapter.
Depending on the type of disc and the disc specification, after finalizing the disc
you may not be able to initialize the disc, edit your recordings or add new
recordings to the disc.
Do not finalize with the camcorder discs that were not recorded using this
camcorder.
Restrictions after Disc Finalization
Additional
Recordings
Initializing
the Disc
Unfinalizing
the Disc
Edit Recordings
DVD-R in
VIDEO mode
–
*
–
–
–
–
DVD-RW in
VIDEO mode
DVD-RW in VR
mode
–
* You will need to unfinalize the disc first.
59
Finalizing the Disc
The length of the finalization process depends on the scenes recorded and the remaining
free space on the disc.
DISC OPERATIONS
FINALIZE
YES
MENU
MENU
*
* During the disc finalization a progress bar is displayed. Close the menu only after the screen
display returns to the [DISC OPERATIONS] menu.
When using a finalized disc, the finalization mark
type display.
will appear next to the disc
Playing Back your Disc on a DVD Player or a Computer’s
DVD Drive
After finalizing it, you can play the disc on DVD-R or DVD-RW compatible devices. On
most DVD players look for the DVD-R/RW compatibility logo
instruction manual of your DVD device.
. Refer also to the
On a DVD Player
1. Turn on the TV and DVD player.
2. Insert a finalized disc in the DVD player.
3. Select the scene you want to play from the index screen.
On a Computer’s DVD Drive
You need to have DVD playback software installed in your computer to play the disc.
1. Insert a finalized disc in the DVD drive.
2. Run the DVD playback software.
• Refer also to the instruction manual and help modules of your DVD playback
software.
•
: To view still images recorded on the disc, close first any DVD playback
software that may be running.
DVD-RW discs recorded in VR mode can only be played on VR mode-
compatible DVD players. Depending on your DVD device you may not be able
to play the disc.
: In order to view the still images recorded on the disc in a DVD player,
you have to convert individual images to scenes, or create a Photomovie scene
(
58) before finalizing the disc. The resolution of Photomovie scenes will be
lower than that of the original still images.
60
Recording Additional Movies on a
Finalized Disc – [UNFINALIZE]
E
You can record additional movies after the finalization by unfinalizing an already finalized
DVD-RW disc in VIDEO mode.
Disc type:
DVD-RW initialized in VIDEO mode.
Be sure to unfinalize the disc in normal room temperatures. If the
procedure was not completed correctly due to high temperature, let the
camcorder cool off before resuming operation.
Place the camcorder on a table or other stable surface before starting the
procedure. Subjecting the camcorder even to slight impacts (for example
to place it on a table or to disconnect the AV cable) after the unfinalization
process started may result in permanent data loss.
Always power the camcorder using the compact power adapter. The operation
cannot be started if the camcorder is powered only with the battery pack.
Avoid the following actions while the operation is in progress. Failing to do so
can interrupt the process and result in permanent data loss.
- Do not move the camcorder.
- Do not disconnect the compact power adapter.
Only discs that were finalized using this camcorder can be unfinalized with this
camcorder.
Disc Can Be Unfinalized
DVD-R in VIDEO mode
–
DVD-RW in VIDEO mode
–
DVD-RW in VR mode
You can record additional scenes even without unfinalizing the disc
DISC OPERATIONS
MENU
MENU
UNFINALIZE
YES
*
* During the disc unfinalization a progress bar is displayed. Close the menu only after the
screen display returns to the [DISC OPERATIONS] menu.
61
External Connections
Connecting to TV and VCR
a
Playing Back on a TV Screen
Selecting the Type of TV
To change the operating mode, refer to About the Operating Modes (
9).
Before connecting the camcorder, select the [TV TYPE] setting according to the TV set to
which you will connect the camcorder - [WIDE TV]: TV sets with 16:9 aspect ratio or
[NORMAL TV]: TV sets with 4:3 aspect ratio (
35).
Connection Diagram: TVs without SCART terminal
INPUT
VIDEO
Signal flow
AUDIO
L
STV-250N Stereo
Video Cable
(Supplied)
R
Open the terminal cover
62
Connection Diagram: TVs with SCART terminal
E
Signal flow
STV-250N Stereo
Video Cable
PC-A10 SCART Adapter
(Supplied)
Open the terminal cover
1. Turn off all devices before starting the connections.
2. Connect the STV-250N Stereo Video Cable to the camcorder’s AV
terminal and the terminals on the TV or VCR.
• TVs without SCART adapter: Connect the white plug to the white audio terminal L
(left), the red plug to the red audio terminal R (right) and the yellow plug to the yellow
VIDEO terminal.
• TVs with SCART adapter:
Insert the PC-A10 SCART Adapter to the terminal on the TV or VCR.
Connect the Stereo Video Cable to the terminals on the SCART Adapter: The
white plug to the AUDIO (L) (left) terminal, the red plug to AUDIO (R) (right)
terminal and the yellow plug to the VIDEO terminal.
3. On a TV: Set the input selector to VIDEO. On a VCR: Set the input
selector to LINE (IN).
C
o
ne
We recommend powering the camcorder using the compact power adapter.
The supplied PC-A10 SCART Adapter is for output only.
cti
n
g
to
aT
V
an
dV
C
R
63
Recording to a VCR
You can copy your recordings by connecting the camcorder to a VCR or a digital video
device. For a connection diagram showing how to connect the camcorder to a VCR see
the previous section Playing Back on a TV Screen (
62).
To change the operating mode, refer to About the Operating Modes (
9).
1. Connected device: Load a blank cassette and set the device to record
pause mode.
2. This camcorder: Locate the scene you wish to copy and pause
playback shortly before the scene.
3. This camcorder: Resume the movie playback.
4. Connected device: Begin recording when the scene you wish to copy
appears. Stop recording when copying is complete.
5. This camcorder: Stop playback.
We recommend powering the camcorder using the compact power adapter.
By default, the on-screen displays will be embedded in the output video signal,
but you can select to turn off the screen displays or select the data that will be
displayed instead (
30).
64
Trouble?
Troubleshooting
If you have a problem with your camcorder, refer to this checklist. Consult your dealer or a
Canon Service Center if the problem persists.
E
Power Source
Problem
Solution
• Camcorder will not turn on. Battery pack is exhausted. Replace or charge the battery
15
• The camcorder switches off pack.
by itself.
• The disc compartment
Attach the battery pack correctly.
cover will not open.
• LCD/viewfinder switches on
and off.
Battery pack will not charge.
Charge the battery pack in temperatures between 0 C and
40 C.
–
–
Battery packs become hot with use and may not charge. The
charging will start once the battery pack temperature is below
40 °C.
The battery pack is damaged. Use a different battery pack.
–
Recording/Playback
Problem
Buttons will not work.
Solution
Turn on the camcorder.
–
20
–
Load a disc.
Abnormal characters appear
Disconnect the power source and reconnect it after a short
on the screen. The camcorder time. If the problem still persists, disconnect the power source
does not operate properly.
and press the RESET button with a pointed item. Pressing the
RESET button resets all settings.
“
“
” flashes on the screen.
” flashes on the screen.
Load a disc.
20
15
Battery pack is exhausted. Replace or charge the battery
pack.
Video noise appears on
screen.
When using the camcorder in a room where a plasma TV is
located, keep a distance between the camcorder and the
plasma TV.
–
–
–
Video noise appears on the
TV screen.
When using the camcorder in a room where a TV is located,
keep a distance between the compact power adapter and the
power or antenna cables of the TV.
Even without a disc loaded,
when closing the disc
The camcorder is checking if a disc is loaded or not. This is not
a malfunction.
compartment cover a motor
sound can be heard.
The disc cannot be ejected.
Turn off the camcorder, disconnect the compact power
adapter and remove the battery pack. Restore the power
supply and try again.
–
The camcorder has exceeded its operational temperature.
Disconnect the compact power adapter and remove the
battery pack and let the camcorder cool down before resuming
use.
The disc cannot be
recognized.
The disc is dirty. Clean the disc with a soft lens-cleaning cloth.
If the problem persists replace the disc.
71
The disc is not correctly loaded. Check the disc.
20
–
The camcorder vibrates.
Depending on the condition of the disc, the camcorder might
vibrate occasionally. This is not a malfunction.
65
Problem
Solution
• The disc’s rotation can be
faintly heard.
• Occasionally the operation
sound can be heard.
The disc is activated from time to time. This is not a
malfunction.
–
–
After using the camcorder for This is not a malfunction. Turn the camcorder off and let it cool
a long time the
in red.
lights up
for a while before resuming operation.
Recording
Problem
Solution
Image will not appear on the
screen.
Set the camcorder to
.
22
Open the lens cover.
“SET THE TIME ZONE,
DATE AND TIME” appears on
the screen.
Set the time zone, date and time.
18
71
Recharge the built-in lithium battery and set the time zone,
date and time.
Pressing the start/stop button Set the camcorder to
.
22
20
will not start recording.
Load a disc.
The disc is full (“
recordings (DVD-RW in VR mode) to free some space or
replace the disc.
END” flashes on the screen). Delete some
20
53
The camcorder has exceeded its operational temperature.
Disconnect the compact power adapter and remove the
battery pack and let the camcorder cool down before resuming
use.
–
Even after stopping recording, The scene or still image (
the disc access indicator does the disc.
not go off.
only) is being recorded on
22
24
The point where the start/stop There is a slight interval between pressing the start/stop
button was pressed does not button and the actual start of the recording on the disc. This is
–
match the beginning/end of
the recording.
not a malfunction.
The recording suddenly stops The disc is dirty. Clean the disc with a soft lens-cleaning cloth.
71
–
shortly after starting
recording.
If the problem persists replace the disc.
The camcorder has exceeded its operational temperature.
Disconnect the compact power adapter and remove the
battery pack and let the camcorder cool down before resuming
use.
Camcorder will not focus.
Sound is distorted.
Autofocus does not work on that subject. Focus manually.
Adjust the viewfinder with the dioptric adjustment lever.
42
17
72
Lens is dirty. Clean the lens with a soft lens-cleaning cloth.
Never use tissue paper to clean the lens.
When recording near loud sounds (such as fireworks or
concerts), sound may become distorted. This is not a
malfunction.
–
A vertical light bar appears on Bright light in a dark scene may cause a vertical light bar
–
the screen.
(smear) to appear. This is not a malfunction.
Viewfinder picture is blurred.
Adjust the viewfinder with the dioptric adjustment lever.
17
66
Playback/Editing
Problem
Solution
Pressing the playback button Check that the disc contains recorded scenes.
–
20
26
–
does not start playback.
E
Load a disc.
Set the camcorder to
.
You may not be able to play with this camcorder discs
recorded or edited with other DVD recorders or computer DVD
drives.
If using a single-sided disc, check that the disc is inserted with
the label side facing up.
20
–
The camcorder has exceeded its operational temperature.
Disconnect the compact power adapter and remove the
battery pack and let the camcorder cool down before resuming
use.
During playback there is
video noise, the sound is
distorted or the disc cannot be
read.
The disc is dirty. Clean the disc with a soft lens-cleaning cloth. 71
You may not be able to play with the camcorder discs
recorded or edited with other DVD recorders or computer DVD
drives.
–
Cannot add scenes to the
playlist.
The disc is full (“
recordings to free some space.
END” flashes on the screen). Delete some
53
You cannot add more than 999 scenes to the playlist.
–
–
Cannot divide the scene.
Cannot edit the disc title.
You cannot edit or delete scenes on a disc that was protected
in another digital device.
You cannot add a title to a DVD-R disc after it was finalized.
Unfinalize the disc first (DVD-RW in VIDEO mode).
59
61
–
You may not be able to edit the title if you entered it with
another digital device.
Remove the disc protection.
55
–
Cannot create a
There are no still images recorded on the disc.
Photomovie scene.
The disc is full (“
recordings (DVD-RW in VR mode) to free some space.
Cannot edit or delete scenes. Remove the disc protection.
Scenes cannot be deleted in a DVD-R disc or a DVD-RW disc
END” flashes on the screen). Delete some
53
55
–
recorded in VIDEO mode.
You cannot edit or delete scenes on a disc that was protected
with another digital device.
–
Cannot finalize the disc.
: You cannot finalize a disc (DVD-R or DVD-RW)
recorded in VIDEO mode if it contains only still images.
Record at least one scene before finalizing the disc.
22
59
No sound from the built-in
speaker.
Open the LCD panel.
–
Speaker volume is turned off. Adjust the volume from the
27
[SYSTEM SETUP] menu in
mode.
67
Playing Back the Disc in an External DVD Device
External DVD device refers to DVD players, DVD recorders, computer’s DVD drives and
other digital devices.
Problem
There is a brief stop between Depending on the DVD player, there might be a very short
scenes. stop between scenes during playback.
Solution
–
62
–
Disc is running, but image will TV/VIDEO selector on the TV is not set to VIDEO. Set the
not appear on the TV screen. selector to VIDEO.
You attempted to play back or dub an incompatible disc. Stop
playback/dubbing.
The disc cannot be
The disc is dirty. Clean the disc with a soft lens-cleaning cloth. 71
recognized by the device. Or,
even though the disc is read,
cannot play back the disc or
the picture is distorted.
The disc has not been finalized.
59
–
DVD-RW discs in VR mode can only be played back with VR
mode-compatible DVD players. Refer to the instruction
manual of your DVD device.
Cannot edit my recordings or It may not be possible to edit or add recordings with an
–
–
add recordings to the disc
with the DVD device.
external DVD recorder on a disc recorded with this camcorder.
When writing on a disc in this The camcorder has exceeded its operational temperature.
camcorder recordings
transferred from a computer,
an error message appears.
Disconnect the compact power adapter and remove the
battery pack and let the camcorder cool down before resuming
use.
List of Messages
Message
Explanation
SET THE TIME ZONE,
DATE AND TIME
You have not set the time zone, date and time. This message
appears each time you turn the power on until you set the time
zone, date and time.
18
CHANGE THE BATTERY Battery pack is exhausted. Replace or charge the battery pack.
PACK
15
–
TEMPERATURE TOO
The camcorder has exceeded its operational temperature.
HIGH CANNOT RECORD Disconnect the compact power adapter and remove the battery
and let the camcorder cool down before resuming use.
TEMPERATURE TOO
HIGH CANNOT REMOVE
DISC
CANNOT RECORD
CHECK THE DISC
There is a problem with the disc. Replace the disc.
20
72
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.
The disc’s recording surface may be dirty or scratched.
–
REACHED THE
The maximum number of scenes has been reached. Delete some
20
53
MAXIMUM NUMBER OF recordings (DVD-RW in VR mode) to free some space or replace
SCENES
the disc.
CANNOT PLAY DISC
The disc is dirty or you attempted to play back a disc type not
supported (not DVD-R/RW).
–
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.
72
CANNOT EDIT DISC
There are no scenes to edit or the recording is damaged.
–
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.
72
68
Message
CANNOT DIVIDE THE
SCENE
Explanation
Photomovie scenes cannot be divided.
You may not be able to divide very short scenes.
58
–
Scenes cannot be divided when the disc already contains 999
scenes.
–
E
You may not be able to further divide scenes shorter than 5
seconds that were created by dividing a previous scene.
–
DISC IS FINALIZED
CANNOT RECORD
You cannot record additional scenes on a finalized DVD-R disc.
–
–
You cannot record additional scenes or unfinalize a DVD-RW disc
in VIDEO mode that was finalized with another digital device.
UNFINALIZE THE DISC
You cannot record additional scenes or convert still images to a
61
55
Photomovie scene (
only) on a finalized DVD-RW in
VIDEO mode. Unfinalize the disc first.
DISC IS PROTECTED
DISC ERROR
The disc is protected. Replace the disc or remove the disc
protection.
Initialize new DVD-RW discs before using them.
55
71
–
CANNOT READ THE
DISC
CHECK THE DISC
Disc could not be read. Try cleaning it or replace the disc.
This message can also appear if the camcorder has exceeded its
operational temperature. Disconnect the power adapter and
remove the battery and let the camcorder cool down before
resuming use.
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.
72
20
The disc may not be loaded correctly. Try removing the disc and
reinserting it.
The disc is not initialized. Initialize the disc.
55
71
DISC ACCESS FAILURE There was an error when reading the disc or attempting to write
CHECK THE DISC
onto it. Try cleaning the disc or replace it.
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.
72
20
The disc may not be loaded correctly. Try removing the disc and
reinserting it.
DISC COVER IS OPEN
NO DISC
Verify the disc is correctly inserted and close the disc cover.
No disc is loaded. Insert a disc.
20
20
–
You inserted a disc recorded in a different Television System
(NTSC).
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.
72
LOADING THE DISC
The disc is being read. Wait before you start recording.
–
–
AVOID MOVING THE
CAMCORDER
Try not to move the camcorder while the image is being recorded.
UNABLE TO RECOVER
DATA
Could not recover a corrupted file.
–
This message can also appear if condensation has formed. If you
suspect condensation is the reason, do not initialize the disc and
wait until the camcorder dries completely before resuming use.
72
DISC FULL
The disc is full (“
recordings (DVD-RW in VR mode) to free some space or replace
the disc.
END” flashes on the screen) . Delete some
20
53
69
Do’s
&
Don’ts
Handling Precautions
Camcorder
Do not subject the camcorder to vibrations or strong impacts while the DISC access
indicator is on or flashing. The data may not be correctly recorded on the disc, and the
recording may be permanently lost.
Do not touch the pick up lens.
Do not carry the camcorder by the LCD panel or the disc cover. Be careful when
closing the LCD panel.
Do not leave the camcorder in places subject to high temperatures (like the inside of a
car under direct sunlight), or high humidity.
Do not use the camcorder near strong electric or magnetic fields such as above TVs,
near plasma TVs or mobile phones.
Do not point the lens or viewfinder at strong light sources. Do not leave the camcorder
pointed at a bright subject.
Do not use or store the camcorder in dusty or sandy places. The camcorder is not
waterproof – avoid also water, mud or salt. If any of the above should get into the
camcorder it may damage the camcorder and/or the lens. Be sure to close the disc
compartment cover after use.
Be careful of heat generated by lighting equipment.
Do not disassemble the camcorder. If the camcorder does not function properly,
consult qualified service personnel.
Handle the camcorder with care. Do not subject the camcorder to shocks or vibration
as this may cause damage.
Battery Pack
DANGER!
Treat the battery pack with care.
• Keep it away from fire (or it might explode).
• Do not expose the battery pack to temperature higher than 60 °C. Do not leave it near
a heater or inside a car in hot weather.
• Do not try to disassemble or modify it.
• Do not drop or knock it.
• Do not get it wet.
Charged battery packs continue to discharge naturally. Therefore, charge them on the
day of use, or the day before, to ensure a full charge.
Attach the terminal cover whenever a battery pack is not in use. Contact with metallic
objects may cause a short circuit and damage the battery pack.
Dirty terminals may cause a poor contact between the battery pack and the camcorder.
Wipe the terminals with a soft cloth.
Since storing a charged battery pack for a long time (about 1 year) can shorten its
lifecycle or affect performance, we recommend to discharge the battery pack fully and
to store it in a dry place at temperatures no higher than 30 °C. If you do not use the
battery pack for long periods, charge and discharge it fully at least once a year. If you
have more than one battery pack, perform these precautions at the same time for all
battery packs.
70
Although the battery pack’s operating temperature range is from 0 °C to 40 °C, the
optimal range is from 10 °C to 30 °C. At cold temperatures, performance will
temporarily decline. Warm it in your pocket before use.
Replace the battery pack if the usable time after full charge diminishes substantially at
normal temperatures.
E
About the battery terminal cover
The battery terminal cover has a [
]-shaped hole. This is useful when you wish to
differentiate between charged and uncharged battery packs.
Back side of the
battery pack
Terminal cover attached
Charged
Uncharged
Mini DVD Disc
The recording surface of DVD discs is extremely delicate. Be sure to observe the
following precautions when handling your discs.
Keep the disc clean of dust, dirt or smudges. Even very small smudges or particles of
dust can lead to problems when recording or playing back the disc. Carefully inspect the
recording surface of the disc before inserting it in the camcorder. If the disc gets dirty
use a dry, soft lens-cleaning cloth to remove any fingerprints, dirt buildup or smudges
from the disc surface. Clean the disc in a radial motion from its center outwards.
Never use a chemically treated cloth or flammable solvents such as paint thinner to
clean the disc.
Do not bend, scratch or wet the disc and do not subject it to strong shocks.
Do not attach labels or stickers on the disc surfaces. The disc may not rotate in a stable
manner and this may cause malfunctions.
Return discs to their case for storage.
When writing on the label side of the disc, avoid hard tip pens. Use waterproof soft-
tipped felt pens instead.
Moving a disc rapidly between hot and cold temperatures may cause condensation to
form on its surfaces. If condensation forms on the disc, put it aside until the water
droplets have evaporated completely.
Never expose the disc to direct sunlight and do not store it in places subject to high
temperatures or high humidity.
Make sure to finalize a disc before inserting it in a DVD player, DVD recorder or a
computer’s DVD drive. Failing to do so can result in the loss of the recorded data.
Built-in Rechargeable Lithium Battery
The camcorder has a built-in rechargeable lithium battery to keep the date/time and other
settings. The built-in lithium battery is recharged while you use the camcorder, however, it
will become totally discharged if you do not use the camcorder for about 3 months.
To recharge the built-in lithium battery: Connect the compact power adapter to the
camcorder and leave it connected for 24 hours with the power switch set to
.
71
Maintenance/Others
Storage
If you do not intend to use the camcorder for a long time, store it in a place free of dust,
in low humidity, and at temperatures not higher than 30 °C.
Cleaning
Camcorder Body
Use a soft, dry cloth to clean the camcorder body. Never use chemically treated cloth
or volatile solvents such as paint thinner.
Pick Up Lens
Remove any dust or dirt particles using a non-aerosol type blower brush. Never touch
the pick up lens directly to clean it.
Lens and Viewfinder
If the lens surface is dirty, the autofocus may not work properly.
Remove any dust or dirt particles using a non-aerosol type blower brush.
Use a clean, soft lens-cleaning cloth to gently wipe the lens or viewfinder. Never use
tissue paper.
LCD Screen
Clean the LCD screen using a clean, soft lens-cleaning cloth.
Condensation may form on the surface of the screen when the temperature changes
suddenly. Wipe it with a soft dry cloth.
Condensation
Moving the camcorder rapidly between hot and cold temperatures may cause
condensation (water droplets) to form on its internal surfaces. Stop using the camcorder if
condensation is detected. Continued use may damage the camcorder.
72
Condensation may form in the following cases:
When the camcorder is moved from an
air-conditioned room to a warm, humid
place
When the camcorder is moved from a
cold place to a warm room
E
When the camcorder is left in a humid
room
When a cold room is heated rapidly
How to avoid condensation:
Do not expose the camcorder to sudden or extreme changes in temperature.
Unload the disc, place the camcorder in an airtight plastic bag and let it adjust to
temperature changes slowly before removing it from the bag.
When condensation is detected:
The camcorder automatically shuts off. If a disc is loaded, remove the disc immediately
and leave the disc cover open. Leaving the disc in the camcorder may damage it.
A disc cannot be loaded when condensation is detected.
Resuming use:
The precise time required for water droplets to evaporate will vary depending on the
location and weather conditions. As a general criterion, wait for 2 hours before
resuming use of the camcorder.
Using the Camcorder Abroad
Power Sources
You can use the compact power adapter to operate the camcorder and to charge battery
packs in any country with power supply between 100 and 240 V AC, 50/60 Hz. Consult
the Canon Service Center for information on plug adapters for overseas use.
Playback on a TV Screen
You can only play back your recordings on TVs compatible with the PAL system. The PAL
system is used in the following countries/areas:
Algeria, Australia, Austria, Bangladesh, Belgium, Brunei, China, Denmark, Finland,
Germany, Hong Kong Special Administrative Region, Iceland, India, Indonesia, Ireland,
Israel, Italy, Jordan, Kenya, Kuwait, Liberia, Malaysia, Malta, Mozambique, the
Netherlands, New Zealand, North Korea, Norway, Oman, Pakistan, Portugal, Qatar,
Serbia and Montenegro, Sierra Leone, Singapore, South Africa, Spain, Sri Lanka,
Swaziland, Sweden, Switzerland, Tanzania, Thailand, Turkey, Uganda, United Arab
Emirates, United Kingdom, Yemen, Zambia.
73
Additional Information
System Diagram
(Availability differs from area to area)
WS-20 Wrist Strap
BP-208
CG-300E
Battery Pack
Battery Charger
Shoulder Strap
CA-570 Compact
Power Adapter
Mini DVD Disc
DVD-R/RW
BP-208 Battery Pack
PC-A10
TV
SCART
Adapter
STV-250N Stereo
Video Cable
VCR
DVD player/
recorder
Mini DVD Disc
DVD-R/RW
Computer
SC-2000 Soft
Carrying Case
74
Optional Accessories
Use of genuine Canon accessories is recommended.
E
This product is designed to achieve excellent performance when used with genuine
Canon accessories. Canon shall not be liable for any damage to this product and/or
accidents such as fire, etc., caused by the malfunction of non-genuine Canon
accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this
warranty does not apply to repairs arising out of the malfunction of non-genuine Canon
accessories, although you may request such repairs on a chargeable basis.
Battery Packs
When you need extra battery packs, select
only the BP-208 battery pack.
CG-300E Battery Charger
Use the battery charger for charging the
battery packs.
Charging Time: 105 min.
Charging time varies according to the
charging condition.
Shoulder Strap
You can attach a shoulder strap for more
security and portability.
Pass the ends through the strap mount and
adjust the length of the strap.
WS-20 Wrist Strap
Use this for extra additional protection for
active shooting.
75
SC-2000 Soft Carrying Case
A handy camcorder bag with padded
compartments and plenty of space for
accessories.
This mark identifies genuine Canon video accessories. When you
use Canon video equipment, we recommend Canon-brand
accessories or products bearing the same mark.
76
Specifications
DC100/DC95
System
E
Disc Recording System
Video: DVD-VIDEO (VIDEO mode)
DVD-VR (VR mode) only with 8 cm DVD-RW
Video Compression: MPEG2
Audio Compression: Dolby Digital 2ch
Still Images: Exif 2.2 compliant with JPEG compression
Television System
Image Sensor
CCIR standard (625 lines, 50 fields) PAL color signal
1/6-inch CCD, approx. 800,000 pixels
Effective pixels:
Movies
16:9 (Image stabilizer [ON]): approx. 470,000
16:9 (Image stabilizer [OFF]): approx. 530,000
4:3 recordings: approx. 400,000
Still images approx. 530,000
Compatible Media
8 cm mini DVD discs marked
with the DVD-R or DVD-RW logo
Maximum Recording Time
(1.4 GB single-sided
8 cm Mini DVD)
XP: approx. 20 min., SP: approx. 30 min., LP: approx. 60 min.
LCD Screen
Viewfinder
Microphone
Lens
2.7 in., wide, TFT color, approx. 112,000 pixels
0.3 in., TFT color, approx. 123,000 pixels
Stereo electret condenser microphone
f=2.6-65 mm, F/1.8-4.4, 25x power zoom
35 mm equivalent:
Movies
16:9 (Image stabilizer [ON]): 43.6-1,090 mm
16:9 (Image stabilizer [OFF]): 41.0-1,025 mm
4:3 recordings: 49.8-1,245 mm
Still images 43.6-1,090 mm
Lens Configuration
AF system
Minimum Focusing Distance
White Balance
10 elements in 8 groups
TTL autofocus, manual focusing possible
1 m; 1 cm on maximum wide angle
Auto white balance, preset white balance (DAYLIGHT, SHADE,
CLOUDY, TUNGSTEN, FLUORESCENT, FLUORESCENT H) or custom
white balance
Minimum Illumination
2.0 lx ([NIGHT] recording program (SCN), Shutter speed at 1/6)
7.5 lx (Auto mode, Auto slow shutter [ON], Shutter speed at 1/25)
Recommended Illumination
Image Stabilization
More than 100 lx
Electronic
Output Terminals
AV OUT Terminal
∅ 3.5 mm minijack; Output only
Video: 1 Vp-p/75 ohms unbalanced
Audio: –10 dBV (47 kohm load)/3 kohm or less
Power/Others
Power supply (rated)
Power consumption
(SP mode, AF on)
7.4 V DC (battery pack), 8.4 V DC (compact power adapter)
3.9 W (viewfinder), 4.0 W (LCD screen [NORMAL])
Operating temperature
0 – 40 °C
Dimensions (W x H x D)
Weight (camcorder body only)
51 x 86 x 123 mm excluding protrusions
410 g
77
CA-570 Compact Power Adapter
Power supply
Power consumption
Rated output
Operating temperature
Dimensions
100 – 240 V AC, 50/60 Hz
17 W
8.4 V DC, 1.5 A
0 – 40 °C
52 x 90 x 29 mm
135 g
Weight
BP-208 Battery Pack
Battery type
Rechargeable Lithium Ion Battery
Rated voltage
Operating temperature
Battery capacity
Dimensions
7.4 V DC
0 – 40 °C
850 mAh
39 x 8 x 63 mm
40 g
Weight
Weight and dimensions are approximate. Errors and omissions excepted. Subject to
change without notice.
78
*
only.
Index
16:9 screen ratio . . . . . . . . . . . . . . . . . 23
9 Point AiAF* . . . . . . . . . . . . . . . . . . . . 43
I
E
Image enhancing effects . . . . . . . . . . . . 47
Image jump . . . . . . . . . . . . . . . . . . . . . . 29
Image stabilizer . . . . . . . . . . . . . . . . . . . 31
Index screen, movies . . . . . . . . . . . . . . 26
Index screen, still images . . . . . . . . . . . 28
Initialization, disc . . . . . . . . . . . . . . . . . 55
A
Abroad, using the camcorder . . . . . . . . 73
Auto (recording program) . . . . . . . . . . . 37
Auto slow shutter . . . . . . . . . . . . . . . . . 31
Av (recording program) . . . . . . . . . . . . 40
AV OUT terminal . . . . . . . . . . . . . . . . . 62
L
Language . . . . . . . . . . . . . . . . . . . . . . . 18
LCD backlight . . . . . . . . . . . . . . . . . . . . 17
LCD screen, rotating the . . . . . . . . . . . . 17
Lens cover . . . . . . . . . . . . . . . . . . . 22, 24
LP mode . . . . . . . . . . . . . . . . . . . . . . . . 36
B
Battery pack, charging . . . . . . . . . . . . . 15
Battery pack, remaining charge . . . . . . 14
Beach (SCN) . . . . . . . . . . . . . . . . . . . . 37
Beep . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
M
C
Magnifying a still image . . . . . . . . . . . . 29
Maintenance . . . . . . . . . . . . . . . . . . . . . 72
MENU . . . . . . . . . . . . . . . . . . . . . . . . 8, 31
Metering method* . . . . . . . . . . . . . . . . . 41
Mode switch . . . . . . . . . . . . . . . . . . . . . 37
Multi selector . . . . . . . . . . . . . . . . . . . . . 8
Multi-image screen . . . . . . . . . . . . . . . . 48
Condensation . . . . . . . . . . . . . . . . . . . . 72
Connection to a TV . . . . . . . . . . . . . . . 62
D
Data code . . . . . . . . . . . . . . . . . . . . . . . 30
Date and time . . . . . . . . . . . . . . . . . . . . 19
Daylight saving time . . . . . . . . . . . . . . . 18
Digital effects . . . . . . . . . . . . . . . . . . . . 48
Digital zoom . . . . . . . . . . . . . . . . . . . . . 31
Disc title . . . . . . . . . . . . . . . . . . . . . . . . 56
DVD discs . . . . . . . . . . . . . . . . . . . . . . . 4
DVD-R/RW discs . . . . . . . . . . . . . . . . . . 4
N
Night (SCN) . . . . . . . . . . . . . . . . . . . . . 37
Normal TV . . . . . . . . . . . . . . . . . . . . . . 35
O
On-screen displays . . . . . . . . . . . . . . . . 30
Original recordings . . . . . . . . . . . . . . . . 52
E
Effects . . . . . . . . . . . . . . . . . . . . . . . . . 48
Erasing still images . . . . . . . . . . . . . . . 57
Error messages . . . . . . . . . . . . . . . . . . 68
Exposure adjustment . . . . . . . . . . . . . . 41
P
P (recording program) . . . . . . . . . . . . . 38
Photomovie scene* . . . . . . . . . . . . . . . . 58
Playback - Movies . . . . . . . . . . . . . . . . 26
Playback - Still images . . . . . . . . . . . . . 28
Playlist . . . . . . . . . . . . . . . . . . . . . . . . . 52
Portrait (SCN) . . . . . . . . . . . . . . . . . . . . 37
Power - Battery pack . . . . . . . . . . . . . . 15
Power - Compact power adapter . . . . . 15
Power save . . . . . . . . . . . . . . . . . . . . . . 34
Protecting the disc . . . . . . . . . . . . . . . . 55
F
Faders . . . . . . . . . . . . . . . . . . . . . . . . . 48
File numbers* . . . . . . . . . . . . . . . . . . . . 34
Finalizing the disc . . . . . . . . . . . . . . . . . 59
Fireworks (SCN) . . . . . . . . . . . . . . . . . . 37
Focus priority* . . . . . . . . . . . . . . . . . . . 32
Focusing mode . . . . . . . . . . . . . . . . . . . 43
FUNC. menu . . . . . . . . . . . . . . . . . . 9, 35
R
G
Record review . . . . . . . . . . . . . . . . . . . . 23
Grip belt . . . . . . . . . . . . . . . . . . . . . . . . 17
79
Recording - Movies . . . . . . . . . . . . . . . 22
Recording - Still images* . . . . . . . . . . . 24
Recording data . . . . . . . . . . . . . . . . . . . 30
Recording mode . . . . . . . . . . . . . . . . . . 36
Recording programs . . . . . . . . . . . . . . . 37
Recording reminder . . . . . . . . . . . . . . . 13
RESET . . . . . . . . . . . . . . . . . . . . . . . . . 65
Review - Movies . . . . . . . . . . . . . . . . . . 23
X
XP mode . . . . . . . . . . . . . . . . . . . . . . . . 36
Z
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Zoom speed . . . . . . . . . . . . . . . . . . . . . 31
S
Scene Editing . . . . . . . . . . . . . . . . . . . . 52
SCN - Special Scene
(recording program) . . . . . . . . . . . . . . 37
Screen displays . . . . . . . . . . . . . . . . . . 13
Screen messages . . . . . . . . . . . . . . . . 68
Self timer . . . . . . . . . . . . . . . . . . . . . . . 44
Serial number . . . . . . . . . . . . . . . . . . . . 11
Shoulder strap . . . . . . . . . . . . . . . . . . . 75
Shutter speed . . . . . . . . . . . . . . . . . . . . 39
Slideshow . . . . . . . . . . . . . . . . . . . . . . . 28
Snow (SCN) . . . . . . . . . . . . . . . . . . . . . 37
SP mode . . . . . . . . . . . . . . . . . . . . . . . 36
Speaker . . . . . . . . . . . . . . . . . . . . . . . . 27
Sports (SCN) . . . . . . . . . . . . . . . . . . . . 37
Spotlight (SCN) . . . . . . . . . . . . . . . . . . 37
Still image quality* . . . . . . . . . . . . . . . . 51
Still image size* . . . . . . . . . . . . . . . . . . 51
Sunset (SCN) . . . . . . . . . . . . . . . . . . . . 37
T
Telephoto . . . . . . . . . . . . . . . . . . . . . . . 25
Time zone . . . . . . . . . . . . . . . . . . . . . . . 18
Troubleshooting . . . . . . . . . . . . . . . . . . 65
Tv (recording program) . . . . . . . . . . . . 39
V
VIDEO mode (disc specification) . . . . . . 4
Viewfinder - Dioptric adjustment . . . . . 17
Volume . . . . . . . . . . . . . . . . . . . . . . . . . 27
VR mode (disc specification) . . . . . . . . . 4
W
White balance . . . . . . . . . . . . . . . . . . . 45
Wide angle . . . . . . . . . . . . . . . . . . . . . . 25
Wide TV (16:9) . . . . . . . . . . . . . . . . . . . 35
Widescreen . . . . . . . . . . . . . . . . . . . . . 23
Wind screen . . . . . . . . . . . . . . . . . . . . . 32
80
|
