Camera User Guide
Flowchart and Reference Guides
This Guide
Shooting with the Camera
Software Starter Guide
Installing the Software
This Guide
Connecting the Camera to a Computer
Software Starter Guide
Downloading Images to a Computer
Please start by reading the Precaution on the reverse side of this cover.
ENGLISH
Table of Contents
Read this First ............................................................................. 4
Quick Start .................................................................................. 8
Components Guide................................................................... 10
Front View ................................................................................... 10
Back View .................................................................................... 11
Controls ....................................................................................... 12
Main Dial / Mode Dial ................................................................... 13
Display Panel ................................................................................ 14
LCD Monitor ................................................................................ 15
Preparing the Camera .............................................................. 18
Charging the Battery Pack............................................................. 18
Installing the Battery Pack ............................................................. 20
Using a Household Power Source .................................................. 22
Using a Charge Adapter / Car Battery Cable Kit (Optional) .............. 23
Installing a CF Card....................................................................... 26
Attaching the Strap ...................................................................... 28
Attaching the Lens Cap ................................................................ 28
Using the Soft Case (Optional) ...................................................... 28
Basic Functions.......................................................................... 29
Turning the Power On / Off ........................................................... 29
Setting the Date / Time ................................................................. 30
Switching between Shooting and Replaying................................... 31
Using the LCD Monitor ................................................................. 32
Pressing the Shutter Button ........................................................... 34
Selecting Menus and Settings........................................................ 35
Shooting - Letting the Camera Select Settings......................... 37
Auto Mode.......................................................................... 37
Checking an Image Right after Shooting........................................ 39
Adjusting the Zoom (Focal Length) ................................................ 40
Using the Built-In Flash ......................................................... 41
Pan Focus Mode .................................................................. 43
Portrait Mode ...................................................................... 43
Landscape Mode ................................................................. 44
Night Scene Mode ............................................................... 44
Black and White Mode ......................................................... 45
Table of Contents 1
Stitch Assist Mode................................................................ 46
Movie Mode ........................................................................ 49
Macro Mode........................................................................ 50
Self-Timer ............................................................................ 51
Continuous Mode ................................................................ 52
Digital Zoom ................................................................................ 53
Shooting - Selecting Particular Effects ..................................... 54
Changing the Resolution and Compression.................................... 54
Changing the File Format .............................................................. 56
Program AE ......................................................................... 57
Setting the Shutter Speed ..................................................... 58
Setting the Aperture ............................................................ 60
Manually Setting the Shutter Speed and Aperture ................. 62
Adjusting the Exposure Compensation .................................. 63
Setting the White Balance .................................................... 64
Auto Exposure Bracketing (AEB Mode) .................................. 67
Adjusting the Flash Output (Flash Exposure Compensation).... 68
Locking the Exposure Setting (AE Lock) ................................. 69
Locking the Flash Exposure Setting (FE Lock) .......................... 70
Switching between Metering Modes..................................... 72
Shooting Problem Subjects for the Autofocus ................................ 73
Switching between Focus Settings ................................................. 76
Manually Setting Image Characteristics .......................................... 77
Resetting the File Number ............................................................. 78
Functions Available in Each Shooting Mode ................................... 79
Replaying .................................................................................. 80
Viewing Images Singly (Single Image Replay) .................................. 80
Magnifying Images .............................................................. 81
Viewing Nine Images at a Time (Multi Replay)........................ 82
Jumping between Images ................................................. 83
Viewing Movies ............................................................................ 84
Rotating Images in the Display ...................................................... 85
Automated Playback (Slide Show).................................................. 86
Protecting Images ......................................................................... 90
Shooting / Replaying with a TV Monitor......................................... 91
Erasing ...................................................................................... 92
Erasing Images Singly.................................................................... 92
Erasing All Images ........................................................................ 93
Formatting a CF Card ................................................................... 94
2
Table of Contents
Print Settings (DPOF Settings) .................................................. 95
Selecting Images for Printing ......................................................... 95
Setting the Print Style.................................................................... 98
Resetting Print Settings ............................................................... 100
List of Menu Options .............................................................. 101
Rec. Menu ................................................................................. 101
Play Menu .................................................................................. 103
Set up Menu .............................................................................. 104
Using the Wireless Controller ................................................. 106
Installing the Battery ................................................................... 106
Shooting / Replaying ................................................................... 107
Using an Externally Mounted Flash (Optional) ...................... 108
Using Conversion Lenses (Optional)
/ Close-up Lenses (Optional) .............................................. 110
Installing the Lenses .................................................................... 111
Downloading Images to a Computer ..................................... 113
Downloading Directly from a CF Card .......................................... 113
Using the Supplied Interface Cables ............................................. 116
Appendices ............................................................................. 122
Replacing the Button Battery ....................................................... 122
Camera Care and Maintenance ................................................... 124
Troubleshooting.......................................................................... 125
List of Error / Message Codes ...................................................... 127
List of Messages ......................................................................... 128
Specifications ............................................................................. 130
Index ....................................................................................... 135
Canon Customer Support ....................................................... 138
Icon Conventions in the Text
This mark denotes topics about issues that may affect shooting.
This mark denotes additional topics that complement the basic operating
procedures.
This mark denotes tips about the camera and photography.
Table of Contents 3
Read this First
Please Read
Test Shots
Before you try to photograph important subjects, we highly recommend that you
shoot several trial images to confirm that the camera is operating and being
operated correctly. Please note that Canon Inc., its subsidiaries and affiliates, and its
distributors are not liable for any consequential damages arising from any
malfunction of a camera or accessory, including CompactFlash™ cards, that results in
the failure of an image to be recorded or to be recorded in a format that is machine
sensible.
Warning Against Copyright Infringement
Please note that Canon digital cameras are intended for personal use and should
never be used in a manner that infringes upon or contravenes international or
domestic copyright laws and regulations. Please be advised that in certain cases the
copying of images from performances, exhibitions, or commercial properties by
means of a camera or other device may contravene copyright or other legal rights
even if the image was shot for personal use.
Warranty Limitations
This camera’s warranty is only effective in the country of sale. If a problem arises
while the camera is in use abroad, please convey it back to the country of sale before
proceeding with a warranty claim to a Canon Customer Support Help Desk.
Safety Precautions
• Before using the camera, please ensure that you read and understand the safety
precautions described below. Always ensure that the camera is operated correctly.
• The safety precautions noted on the following pages are intended to instruct you in
the safe and correct operation of the camera and its accessories to prevent injuries or
damage to yourself, other persons and equipment.
• In the next few pages, the term “equipment” refers primarily to the camera and its
power supply accessories.
4
Read This First
Warnings
• Do not aim the camera directly into the sun or at other intense light sources that could
injure your eyesight.
• Do not trigger the flash in close proximity to human or animal eyes. Exposure to the
intense light produced by the flash may injure eyesight. In particular, remain at least
one meter (39 inches) away from infants when using the flash.
• Store this equipment out of the reach of children and infants. Accidental damage to
the camera or batteries by a child could result in serious injury. In addition, placement
of the strap around the child’s neck could result in asphyxiation.
• Be particularly careful to keep the button batteries used in the camera and wireless
controller out of the reach of children. Seek medical assistance immediately if a child
swallows a battery.
• Do not attempt to disassemble or alter any part of the equipment that is not expressly
described in this guide. Disassembly or alteration may result in high-voltage electrical
shock. Internal inspections, alterations and repairs should be conducted by qualified
service personnel authorized by your camera distributor or the closest Canon Customer
Support Help Desk.
• To avoid the risk of high-voltage electrical shock, do not touch the flash portion of the
camera if it has been damaged. Similarly, never touch internal portions of the
equipment that become exposed as a result of damage. There is a risk of high-voltage
electrical shock. Please take the first opportunity to consult your camera distributor or
the closest Canon Customer Support Help Desk.
• Stop operating the equipment immediately if it emits smoke or noxious fumes. Failure to do
so may result in fire or electrical shock. Immediately turn the camera’s power off, remove
the camera battery and unplug the power cord from the electrical outlet. Confirm that
smoke or fume emissions have ceased. Please consult your camera distributor or the closest
Canon Customer Support Help Desk.
• Stop operating the equipment if it is dropped or the casing is damaged. Failure to do so
may result in fire or electrical shock. Immediately turn the camera’s power off, remove the
camera battery and unplug the power cord from the electrical outlet. Please consult your
camera distributor or the closest Canon Customer Support Help Desk.
• Do not allow the equipment to come into contact with, or become immersed in, water
or other liquids. Do not allow liquids to enter the interior. The camera has not been
waterproofed. If the exterior comes into contact with liquids or salt air, wipe it dry with
a soft, absorbent cloth. If water or other foreign substances enter the interior,
immediately turn the camera’s power off and remove the camera battery or unplug the
power cord from the electrical outlet. Continued use of the equipment may result in
fire or electrical shock. Please consult your camera distributor or the closest Canon
Customer Support Help Desk.
Read This First 5
• Do not use substances containing alcohol, benzene, thinners or other flammable
substances to clean or maintain the equipment. The use of these substances may lead
to fire.
• Do not cut, damage, alter or place heavy items on the power adapter cord. Any of these
actions may cause an electrical short circuit, which may lead to fire or electrical shock.
Replace a broken or damaged power adapter cord.
• Do not handle the power cord if your hands are wet. Handling it with wet hands may
lead to electrical shock. When unplugging the cord, ensure that you hold the solid
portion of the plug. Pulling on the flexible portion of the cord may damage or expose the
wire and insulation, creating the potential for fires or electrical shocks.
• Use of power sources not expressly recommended for this equipment may lead to
overheating, distortion of the equipment, fire, electrical shock or other hazards. Use
only the recommended power accessories.
• Always turn off the computer and unplug the camera from the DC plug before
attaching or detaching any interface cables (except for USB cables). The cables carry
high-voltage currents and there is a risk of electrical shock.
• Do not place the batteries near a heat source or expose them to direct flame or heat.
Neither should you immerse them in water. Such exposure may damage the batteries and
lead to the leakage of corrosive liquids, fire, electrical shock, explosion or serious injury.
• Do not attempt to disassemble, alter or apply heat to the batteries. There is serious risk
of injury due to an explosion. Immediately flush with water any area of the body -
including the eyes and mouth, or clothing - that comes into contact with the inner
contents of a battery. If the eyes or mouth contact these substances, immediately flush
with water and seek medical assistance.
• Avoid dropping or subjecting the batteries to severe impacts that could damage the
casings. It could lead to leakage and injury.
• Do not short-circuit the battery terminals with metallic objects, such as key holders. It
could lead to overheating, burns and other injuries. Use the supplied terminal cover to
transport or store the battery pack.
• Before you discard a battery, cover the terminals with tape or other insulators to
prevent direct contact with other objects. Contact with the metallic components of
other materials in waste containers may lead to fire or explosions. Discard the batteries
in specialized waste facilities if available in your area.
• Use of batteries not expressly recommended for this equipment may cause explosions
or leaks, resulting in fire, injury and damage to the surroundings. Use only
recommended batteries and accessories.
• Disconnect the compact power adapter from both the camera and electrical outlet after
recharging and when the camera is not in use to avoid fires and other hazards. Continuous
use over a long period of time may cause the unit to overheat and distort, resulting in fire.
6
Read This First
• The camera terminal of the supplied compact power cord is designed for exclusive use
with your camera. Do not use it with other products or batteries. There is a risk of fire
and other hazards.
• Exercise due caution when screwing on the separately sold wide converter lens, tele-
converter lens, close-up lens and conversion lens adapter. If they loosen, fall off and
shatter, the glass shards may cause an injury. Never aim the lenses at the sun or
strong light sources. There is a risk of damage to eyesight.
CAUTIONS
• Avoid using, placing or storing the equipment in places subject to strong sunlight or
high temperatures, such as the dashboard or trunk (boot) of a car. Exposure to intense
sunlight and heat may cause the batteries to leak, overheat or explode, resulting in fire,
burns or other injuries. High temperatures may also cause deformation of the casing.
Ensure that there is good ventilation when using the compact power adapter to charge
the battery pack or power the camera.
• Do not store the equipment in humid or dusty areas. Storage in such areas could lead
to fire, electrical shock or other damage.
• Be careful not to bang the camera or subject it to strong impacts or shocks that could
lead to injury or damage the equipment when wearing or holding it by the strap.
• Be careful not to cover the flash with your fingers when shooting. In addition, do not
touch the surface of the flash after taking several pictures in rapid succession. Either
action could result in burns.
• If your camera is used for prolonged periods, the camera body may become warm.
Please take care when operating the camera for extended periods as your hands may
experience a burning sensation.
Preventing Malfunctions
Avoid Strong Magnetic Fields
Never place the camera in close proximity to electric motors or other equipment
generating strong electromagnetic fields. Exposure to strong magnetic fields may cause
malfunctions or corrupt image data.
Avoid Condensation Related Problems
Moving the equipment rapidly between hot and cold temperatures may cause
condensation (water droplets) to form on its external and internal surfaces. You can
avoid this by placing the equipment in an airtight, resealable plastic bag and letting it
adjust to temperature changes slowly before removing it from the bag.
If Condensation Forms Inside the Camera
Stop using the camera immediately if you detect condensation. Continued use may
damage the equipment. Remove the CF card and battery or Compact Power Adapter
CA-560 (if connected) from the camera and wait until the moisture evaporates
completely before resuming use.
Read This First 7
Quick Start
Install the Battery (p. 20).
Slide the battery cover lock, push the battery
cover open and insert the battery.
1
Terminals
Charge the Battery (p. 18).
Confirm that the main dial is turned to
2
.
Charge the battery. The battery is approximately
90% charged (adequate charge for use) when
the orange indicator beside the viewfinder stops
flashing and changes to a steady orange. After
charging, detach the compact power adapter’s
DC plug from the camera.
Orange
Indicator
Install the CF card. (p. 26).
Open the CF card slot and insert a CF card.
3
4
5
Remove the lens cap.
Turn the power on (p. 29).
Open the LCD monitor and turn the main dial
(lower dial) to
(shooting).
8
Quick Start
Turn the mode dial (upper dial) to
(p. 37).
6
7
Focus (p. 34).
Aim the camera and lightly press the shutter
button halfway. Two beeps will sound when the
autofocus is set.
Shoot (p. 34).
8
9
Press the shutter button all the way. You will hear
the sound of the shutter close when the shot is
complete.
View the recorded image (p. 39).
The recorded image will display in the LCD
monitor for approximately 2 seconds. Keep your
finger on the shutter button or press the Set
button while the image is displayed to continue
to display the image after the shutter button is
released.
To Immediately Delete the Displayed
Image
1. Press the button while the image is displayed.
2. Press the
[OK].
arrow on the omni selector to select
3. Press the Set button.
Quick Start 9
Components Guide
Front View
AF-Auxiliary Light Emitter
Optical Viewfinder Window
(p. 38)
Red-Eye Reduction Lamp (p. 41)
Self-Timer Lamp (p. 51)
Remote Sensor (p. 107)
Built-In Flash (p. 41)
Speaker
(Manual Focus) Button (p. 74)
Terminal Cover
Microphone
Lens
A/V OUT (Audio / Video Out)
Terminal (p. 91)
DIGITAL Terminal*
(pp.119, 120)
DC IN Terminal (p. 18)
• To connect the camera to the computer with the USB interface, attach the supplied
interface cable to the camera’s DIGITAL terminal. To connect to a serial port, the
separately sold serial cable (IFC-200PCS for Windows and IFC-200MC for Macintosh)
is required.
10 Components Guide
Back View
Viewfinder (p. 38)
CF Card Slot Cover (p. 26)
Strap Eyelet (p. 28)
Battery Cover (p. 18)
Battery Cover Lock (p. 18)
Tripod Socket
Components Guide 11
Controls
Hot Shoe (p. 108)
Main Dial (p. 13)
Indicators
Mode Dial (p. 13)
Shutter Button (p. 34)
Zoom Lever (p. 40)
Diopter Adjustment Lever
(p. 38)
Display Panel (p. 14)
(Continuous) /
(Self-Timer / Wireless
Controller) Button
(pp. 51, 52, 107)
LCD Monitor
(pp. 15, 32)
Omni Selector
(Menu) Button
(Set) Button
(Display) Button
(Exposure) /
(White Balance) /
(AEB) / (Flash Exposure Compensation)
Button (pp. 63, 64, 67, 68)
(AE Lock) / (FE Lock) Button (p. 69, 70)
(Macro) /
(Spot Metering) /
(pp. 72, 81)
(Multi) Button (pp. 41, 82)
(Jump) Button (pp. 50, 82)
(Enlarge) Button
(Flash) /
Indicators
Upper Indicator
The indicators shine or flash when the shutter button is pressed or the following
operations are underway.
• Green:
• Flashing Green:
• Orange:
Ready to record / Battery charge complete (100%)
Recording to CF card / Reading CF card / Erasing from CF card
Ready to record (flash on) /
Battery charge adequate (approximately 90%)
• Flashing Orange: Ready to record (camera shake warning) /Battery is charging
Lower Indicator
• Yellow:
Macro mode / Manual focus mode
12 Components Guide
Main Dial / Mode Dial
Main Dial (lower dial)
Mode Dial (upper dial)
Main Dial
Use the main dial to switch between the power off, shooting, replaying and PC
connection modes.
: Off (p. 29)
: Shooting (p. 31)
: Replaying (p. 31)
: PC Connection (pp. 119, 121)
• The
(PC connection) mode is used to download and view images on a computer
when the camera is connected via the interface cable. Please read Using the Supplied
Interface Cables (p. 116) for connection instructions. The Software Starter Guide, a
separate manual, describes how to download and view the images.
• “PC” will show in the display panel when a connection to the computer is opened.
Mode Dial
The mode dial is for selecting a shooting mode when the main dial is set to
(shooting) mode.
•
: Auto (p. 37)
• Image Zone
Pan Focus (p. 43)
• Creative Zone
Program AE (p. 57)
:
:
:
Shutter Speed-Priority AE (p. 58)
Aperture-Priority AE (p. 60)
Manual Exposure (p. 62)
:
:
Portrait (p. 43)
Landscape (p. 44)
Night Scene (p.44)
Black and White (p. 45)
: Stitch Assist (p. 46)
Movie (p. 49)
:
:
:
:
:
Components Guide 13
Display Panel
The display panel shows the camera settings, the remaining image capacity, movie
shooting time, battery charge and other information.
AE Lock / FE Lock
pp. 69, 70
Shutter Speed / Movie Shooting Time
Aperture Setting
-
-
Compression
Resolution
p. 54
p. 54
File Format
p. 56
p. 72
Spot Metering
Single Shot / Continuous Mode
Flash On / Flash Off
p. 52
p. 41
Red-Eye Reduction
p. 41
Macro Mode
p. 50
Flash Exposure Compensation
Self-Timer / Wireless Controller
Manual Focus
p. 68
pp. 51, 107
p. 74
Battery Charge State
Remaining Image Capacity / Message Code / Error Code
White Balance Settings
AEB
p. 20
p. 127
p. 64
p. 67
Exposure Compensation Level / AEB Level /
Flash Exposure Compensation Level
pp. 63, 67, 68
• The diagram above shows all the icons appearing at once. Normally, only the icons
applicable to the selected mode and camera state appear.
14 Components Guide
LCD Monitor
Switching between Modes
Pressing the Display button switches the LCD monitor display mode.
Shooting
• Pressing the Display button cycles the LCD monitor to the next mode each time the
button is pressed. The order is on (no information) / on (information view) / off.
• The LCD monitor’s display mode [on (no information); on (information view); LCD
monitor off] is memorized when the camera is turned off. When the camera is
turned on again it assumes the last mode. However, when the LCD monitor is
turned on and the low battery icon
appears, the LCD monitor may not
automatically turn on the next time the camera is started.
• Changing the shooting mode will cause the LCD monitor to display relevant
information for about six seconds when it is turned on regardless of whether the
information view mode is on or off.
• Setting the mode dial to
or
turns on the LCD monitor regardless of
whether it is set to on or off.
• The camera shake warning icon
will appear at the center of the LCD monitor in
low light conditions while the camera is preparing to shoot. When this icon
appears, use the flash or fix the camera to a tripod to shoot.
Replaying
• The LCD monitor turns on when the main dial is turned to
.
• Pressing the Display button switches the information view mode.
Single Replay: Simple Display © Detailed Display © No Display
Multi Replay: Simple Display © No Display
Components Guide 15
Information Displayed on the LCD Monitor
The LCD monitor displays information in the shooting or replaying mode, such as
the camera settings, remaining image capacity and shooting date / time.
Shooting
The following displays in information view.
Shooting Mode
p. 13
Flash
p. 41
Drive Mode
Spot Metering
White Balance
Exposure Level
AEB Mode
pp. 51, 52
p. 72
p. 64
p. 63
p. 67
... ...
Aperture Setting
MF (Manual Focus)
Indicator
Flash Exposure
Compensation
p. 68
Externally mounted Flash
Charging Complete
-
Shutter Speed
(RED)
AE Lock / FE Lock
Macro Mode
pp. 69, 70
p. 50
Manual Focus
p. 74
Digital Zoom Setting
p. 53
2x
4x
•
The icons in the shaded boxes above display even when the
information view is turned off.
•
In addition to the above, the shutter speed, aperture setting and
MF indicator (when manual focus is selected) are displayed as in
the example to the left.
16 Components Guide
Replaying
In simple display mode, the following information
displays.
File Number
• File Number
• Image Number (Displayed Image / Total)
• Shooting Date / Time
•
•
•
•
: Compression Setting
: Resolution Setting
File Format
:
:
Movie
Shooting
Date / Time
Image Number
and Total
• Protection Status ( )
In the detailed display mode, the following
information also displays.
Shooting Mode
p. 13
... ...
Exposure Compensation
White Balance
p. 63
p. 64
p. 72
Spot Metering
Flash Exposure
Compensation
Aperture Setting
Shutter Speed
p. 68
* In addition to the above, the ISO speed, shutter speed and
aperture setting are displayed as in the example to the left.
ISO Speed Setting
The following information may also appear with some image files.
Audio file is attached (wav file).
An audio file other than a wav file or a file with an unrecognized format is attached.
A JPEG file not supported by “Design rule for Camera File system” standards.
Components Guide 17
Preparing the Camera
Charging the Battery Pack
Use the following procedures to charge the battery pack the first time and
subsequently when the low battery icon ( ) and Lb ( ) message flash.
Turn the main dial to
.
1
2
Slide the battery cover lock in the
direction of the arrow and open the
battery cover.
Insert the battery pack and close the
battery cover.
3
4
5
Terminals
Attach the power cord to the compact
power adapter and plug it into an
electrical outlet.
Connect to an
Elactrical Outle.t.
.
Connect the DC plug of the compact
power adapter to the camera’s DC IN
terminal.
• The indicator beside the viewfinder will flash
orange while the battery pack is charging and
change to steady orange when it is
approximately 90% charged, which is adequate
for use. If it is charged for approximately two
more hours, it will become fully charged and
the indicator will switch to green.
Orange
Indicator
18 Preparing the Camera
• After charging the battery, remove it from the camera if the camera will not be
used.
• If the main dial is set to any position other than
while charging, the battery
pack will stop charging and the household electrical current will power the
camera.
• This is a lithium ion battery pack so there is no need to completely use or
discharge it before recharging. It can be charged at any charge state.
• It takes approximately 80 minutes to bring a fully discharged battery pack to a
charge state of approximately 90% (adequate charge for use). It takes
approximately two more hours to charge it fully (based on standard Canon testing
criteria). Charge it within a temperature range of 5 to 40º C (41 to 104º F).
• Charging times will vary according to the surrounding humidity and battery pack
charge state.
Battery Pack Handling Precautions
• Keep the battery pack and camera terminals (
) clean at all times. Dirty
terminals may cause a poor contact between the battery pack and camera. Polish
the terminals with a tissue or a dry cloth before charging or using the battery pack.
• Do not cover the compact power adapter with anything, such as a tablecloth,
cushion or blanket, when it is charging. Heat will build up internally and possibly
lead to fire.
• Do not charge batteries other than Battery Pack BP-511 with the supplied
equipment. It could damage the camera.
• The battery pack continues to discharge a small amount when left in the camera
even with the power turned off. This shortens the battery life. Remove it from
the camera, attach the supplied terminal adapter and store it in a cool, dry place.
Charge it before use.
• Even charged battery packs continue to discharge naturally. You are advised to
charge the battery on the day of use, or one day before, to ensure a full charge.
Storing fully charged battery packs may shorten battery life and diminish
performance.
• The camera consumes the battery charge when the power is on even when a
function is not being used. To conserve the battery charge, be particularly
attentive in turning the power off.
• Although the battery pack’s maximum operating range is 0 to 40º C (32 to 104º F),
the optimal range is 10 to 30º C (50 to 86º F). At cold temperatures, such as those
experienced on ski hills, performance will temporarily decline, reducing the usable
time before recharging.
• If the usable time of a battery pack diminishes substantially even when fully
charged, it should be replaced.
Preparing the Camera 19
Installing the Battery Pack
Install Battery Pack BP-511 (supplied) into the camera as follows. Use a household
power source to power the camera for extended periods (p. 22).
Turn the main dial to
.
1
2
Slide the battery cover lock in the
direction of the arrow and open the
battery cover.
Insert the battery pack as shown.
Close the battery cover.
3
4
Terminals
• Charge the battery pack before using it the first time (p. 18).
• The flashing green indicator signals that the CF card is being written to, read, or
erased. Never open the battery cover or remove the battery while it is flashing.
• Remove the battery pack when the camera is not in use.
Battery Status Symbols
• The following icons indicate the battery status. These icons will not appear while
the camera is plugged into a household power source.
(Steady):
Sufficient battery charge
(Flashing): Low battery
(Flashing): Replace or recharge battery
20 Preparing the Camera
Battery Performance
Number of Images Shot
Replay Time
LCD Monitor On
LCD Monitor Off
Approx. 160 minutes
Approx. 260 images
Approx. 800 images
Battery Pack BP-511 (full charged)
• The data above will vary according to the shooting conditions and settings.
• Movie data is excluded.
• At low temperatures, the battery pack performance may diminish and the low battery icon appear very rapidly.
In these circumstances, the performance can be improved by warming the battery pack in a pocket before use.
<Test Conditions>
Shooting: Room temperature (23º C, 73º F), alternating maximum wide angle and maximum telephoto shots at
20-second intervals with flash fired once every four shots and camera power turned off and on every
eighth shot. CF card used.
Replaying: Room temperature (23º C, 73º F), continuous playback at one image per 5 seconds. CF card used.
Preparing the Camera 21
Using a Household Power Source
You are advised to use a household power source for long periods of use and for
connecting to a computer.
Attach the power cord to the compact
Connect to an
1
power adapter and plug it into an
Elactrical Outle.t.
.
electrical outlet.
Compact Power Adapter
CA-560
Open the terminal cover and connect
the DC plug of the compact power
adapter to the camera’s DC IN terminal.
2
• Always disconnect and unplug the compact
power adapter after use.
• Always turn the camera’s power off before connecting or disconnecting the
compact power adapter.
• Battery Pack BP-511 cannot be charged while the compact power adapter is being
used to run the camera (main dial is set to any position other than Off).
• Do not use Compact Power Adapter CA-560 to power to any device other than
one for which Battery Pack BP-511 is specified.
22 Preparing the Camera
Using a Charge Adapter / Car Battery Cable Kit
(Optional)
Charge Adapter / Car Battery Cable Kit CR-560 (optional) can be used to charge
battery packs or to power the camera from a car’s cigarette lighter socket. You can
also charge a battery pack from a household power source without using the
camera by connecting Compact Power Adapter CA-560 (supplied with the camera)
to Charge Adapter / Car Battery Cable Kit CR-560.
Using a Car Cigarette Lighter Socket as a Power Source
Attach the DC cable and car battery
cable to the charge adapter.
1
Charge Adapter
Connect the DC cable to the camera’s
DC IN terminal.
• Confirm that the camera’s main dial is turned
2
to
.
With the engine running, plug the car
battery cable into the car’s cigarette
lighter socket.
To a Car’s Cigarette
3
Lighter Socket
• Be sure to have the engine running when you
unplug it too.
Turn the camera on.
4
• Always ensure that the car’s engine is running when you use Charge Adapter / Car
Battery Cable Kit CR-560. Use of the kit without the engine running may flatten
the car battery. Always unplug the kit before turning off the engine.
Preparing the Camera 23
Charging the Battery Pack
Attach the car battery cable to the
charge adapter.
1
With the engine running, plug the car
battery cable into the cigarette lighter
socket.
To a Car’s Cigarette
2
Lighter Socket
Attach the battery pack.
• Align the battery pack with the
charge adapter and slide it in the direction of
the arrow.
3
©
mark on the
• Up to two Battery Pack BP-511s can be placed
in the charge adapter simultaneously.
• Either slot, A or B, can be used to charge a
single battery pack. When two are placed in the
charge adapter, the first one to be installed will
start charging. The second battery pack will start
charging after the first has been fully charged.
• If two battery packs have been placed in the
charge adapter before it is plugged into the
cigarette lighter socket, the one placed in the A
side will charge first. (B side will start after A side
is fully charged.)
• The red light will flash while a battery pack is
charging and shine steady when it is charged.
• It takes approximately 80 minutes to charge a
single battery pack.
After charging, remove the battery pack.
• Remove the battery pack by sliding it in the
opposite direction from which it was installed.
4
24 Preparing the Camera
With the engine running, unplug the
car battery cable from the socket.
5
• Whenever you turn the engine off, the battery
will stop charging, so be sure to unplug the
charge adapter from the cigarette lighter socket.
• Wait until the engine is running again to plug it
back into the cigarette lighter socket and
resume charging.
Charging with the Compact Power Adapter
Battery packs can also be charged in the charge adapter using a household power
source by attaching Compact Power Adapter CA-560 in place of the car battery
cable. This allows you to use the camera while your other battery packs are charging.
Connect to an electrical outlet
...
The shape of the power cord
plug varies between regions.
Compact Power Adapter CA-560
Preparing the Camera 25
Installing a CF Card
Turn the main dial is set to
.
1
2
Slide the CF card cover in the direction
of the arrow and lift it open.
Insert the CF card with the label facing
up and the arrow pointing in.
• Push the card in until the CF card eject button
fully extends.
3
• To remove the CF card, push the CF card eject
button and pull the card out.
CF Card
Eject Button
CF Cards and Estimated Capacities (Recordable Images)
FC-8M
3
FC-16M
8
FC-32M
17
FC-64M
35
FC-128M
71
(Large)
2048 x 1536 pixels
7
15
32
64
130
15
32
64
130
261
12
25
51
103
207
(Medium) 1024 x 768 pixels
22
45
91
183
368
41
84
170
109
189
323
11
342
684
26
54
220
441
(Small)
640 x 480 pixels
46
94
379
760
79
161
5
648
1298*
49
RAW
Movie
2048 x 1536 pixels
320 x 240 pixels
2
24
30 sec.
62 sec.
124 sec.
250 sec.
502 sec.
* Figures over 1000 display as “999” since the display panel can only show up to three digits.
• For movies, time figures are displayed as if the movies were shot continuously. A movie file, however, has a
maximum length of approximately 30 seconds.
• These figures reflect standard shooting conditions established by Canon. Actual totals may vary according to the
subject, shooting conditions and shooting mode.
•
Superfine, Fine and Normal indicate the relative compression ratio.
26 Preparing the Camera
• When the camera’s indicator flashes green, the camera is writing, reading, erasing
or transmitting an image to or from the card. Do not perform the following, for
image data may be lost or corrupted:
- Do not apply shocks or vibrations to the camera.
- Do not turn off the power or open the battery cover.
- Do not open the CF card slot cover or remove the CF card.
• Never open the CF card slot cover when the power is on.
• Please note that CF cards formatted in or edited with other manufacturer’s
cameras or application programs may not operate correctly in the camera.
CF Card Handling Precautions
• CF cards are high-precision electronic devices. Do not bend, force, or subject
them to shocks or vibration.
• Do not attempt to disassemble or alter a CF card.
• Moving a CF card rapidly between temperature extremes may cause condensation
to form in the card, leading to potential malfunctions. To avoid condensation
formation, place the CF card in a sealed plastic bag before moving it into a
different temperature zone and allow it to adjust slowly to the new temperature. If
condensation forms on the CF card, put it aside until the water droplets have
evaporated completely.
• Place the CF card in the supplied case for storage.
• Do not use or store CF cards in the following types of location.
- Locations subject to dust or sand
- Locations subject to high humidity and high temperatures
Microdrives are a recording medium with a hard disk. Their merits are a large
capacity and a low price per megabyte of capacity. However, they are relatively
more susceptible to vibrations and shocks than CF cards, which use durable
flash memories. Please be careful, therefore, not to subject the camera to
vibrations or shocks when using a microdrive, especially while recording or
replaying.
Preparing the Camera 27
Attaching the Strap
Slip the small loop of the strap through
the strap eyelet on the camera and
through the hand loop.
• Avoid waving the camera about or catching it on other items when suspending it
from the strap.
Attaching the Lens Cap
Fit the lens cap over the lens casing so
that it covers the entire lens. Always
replace the lens cap after use.
• Attach the lens cap cord to the strap or strap eyelet.
• Remove the lens cap before turning on the camera power.
Using the Soft Case (Optional)
The soft case can be used to carry the
camera, battery pack, CF card and the
wireless controller.
• Optional soft case appearance and
specifications may vary according to region.
28 Preparing the Camera
Basic Functions
Turning the Power On / Off
Turn the main dial left or right from the
1
position.
• The power is off when in the
position and
on in any other.
Example of the main dial
turned to
(Shooting).
•
will appear in the display panel and a warning beep will sound if you turn on
the camera with the lens cap on. If this occurs, remove the lens cap and turn the
camera off and back on.
• Be careful not to touch the lens when shooting. Please also refrain from forcing
the lens with fingers or other objects. It could lead to malfunctions or damage the
camera. If the camera will not focus or
appears in the display panel and a
warning beep sounds, turn the camera off and back on.
• Pressing the shutter button halfway will restore power when the camera shuts
down with the power save function.
Power Save Function
The camera is equipped with a power save function.
Shooting Mode:
powers down approximately 3 minutes after a control is last
accessed. The LCD monitor will shut off approximately 3
minutes after a control is last accessed even if the power
save function is turned off.
Replaying Mode:
powers down approximately 5 minutes after a control is last
accessed.
PC Connection Mode: displays a warning message on the computer screen
approximately 5 minutes after a control is last accessed. The
camera will power down if no controls are used after 1
additional minute.
• Please note that the camera continues to consume a minimal amount of power
even when the power save function shuts it down.
• The power save function is disabled while a slide show plays on the camera (p. 86).
• You can turn off the power save function in the Set up menu (p. 104).
Basic Functions 29
Setting the Date / Time
Turn the main dial to
• The camera will power up.
or
.
1
Press the Menu button.
2
3
• The [ (Rec.)] or [
(Play)] menu will display.
Press the
arrow on the omni selector
to select the [ (Set up)] menu.
• Pressing the Jump button also switches
between menus.
(Rec.) Menu.
Press the
selector to select [Date/Time], then
press the Set button.
or
arrow on the omni
4
• The factory default for the date format may
differ from that shown here in some regions.
Set the date and time.
5
• Press the
to move between fields.
• Press the or arrow on the omni selector
to set the values.
or
arrow on the omni selector
Press the Set button.
• After adjusting the settings, press the Menu
button to close the menu window.
6
• If the Set Date/Time menu appears when the camera is turned on, it means that
the date battery (button battery) charge is low and that the settings have been
lost. Reset the date and time after you replace the button battery (p. 122).
• The date can be set up to the year 2030.
30 Basic Functions
Switching between Shooting and Replaying
Shooting
• Turn the main dial to
.
Replaying
• Open the LCD monitor and turn the main dial
to . If you switch rapidly to replay mode
directly from shooting mode, the lens may not
retract. This is convenient when you wish to
shoot again after checking or deleting an
image immediately after it is shot.
• Be careful not to touch the lens while in replay
mode.
Basic Functions 31
Using the LCD Monitor
The LCD monitor can be used to confirm an image during shooting, to replay
recorded images or to adjust menu settings. It can be opened to the following
range of positions.
• Opened left to right 180 degrees. It locks
temporarily at 90 degrees.
• Tilted forward 180 degrees toward the lens or
backward 90 degrees.
• The LCD monitor will automatically turn off
when it clicks shut against the camera body.
For protection, always close the LCD monitor
after use.
• Prevent the DC cable from touching the LCD monitor when the camera is
connected to a household power source.
• If the LCD monitor is difficult to see because of the surrounding light conditions,
you can adjust it in the [Set up] menu with the [LCD Brightness] option (p. 104).
32 Basic Functions
The LCD monitor can also be positioned as below.
Open the LCD monitor left 180 degrees
and tilt it 180 degrees toward the lens.
• In this position, icons and messages do not
appear on the LCD monitor.
1
• The image shown on the LCD monitor is
automatically flipped and reversed so that it
appears correctly from in front of the lens.
Fold the LCD monitor back against the
camera body.
• Fold it until it clicks into place against the
camera body. If it is not fully closed, the image
will appear reversed and icons and messages
will not display
2
• Icons and messages will appear and images will
show properly (not reversed) when the LCD
monitor is folded right against the camera until
it clicks.
Basic Functions 33
Pressing the Shutter Button
The shutter button features a two-stage action.
Pressing Halfway
• Pressing halfway automatically sets the
exposure, focus and white balance. When
metering is complete, two beeps sound and
the indicator shines green. When the flash is
on, the indicator shines orange. If the indicator
is flashing orange, it warns of possible camera
shake or low light. In macro or manual focus
mode, the yellow indicator will also shine.
Pressing Fully
• You will hear the sound of the shutter close
(shutter sound) when the shot is complete.
Do not move the camera until it sounds. The
indicator will flash green while the image is still
recording onto the CF card. When the flashing
orange indicator warns of camera shake or low
light, you can still take the shot by pressing the
shutter button fully.
• Images are first saved into the camera’s internal memory before being recorded
onto the CF card, allowing the next images to be taken immediately as long as
sufficient space is available in the internal memory.
• The beep and shutter sound can be set On / Off in the Set up menu (p. 104).
• When the shutter sound is set to Off, but the beep is set to On, one beep will
sound when the shutter button is fully pressed.
• There is no shutter sound in movie mode.
34 Basic Functions
Selecting Menus and Settings
Menus are used to adjust shooting, replaying, date / time and electronic sound
settings. Watch the LCD monitor while performing the following procedures.
Press the Menu button.
1
• In
mode, the [ (Rec.)] menu will appear.
In
mode, the [
(Play)] menu will appear.
Press the
or
arrow on the omni
2
selector to switch between menu tabs.
• Pressing the
arrow displays the [ (Set up)]
arrow displays either the
(Rec.)] or [ (Play)] menu.
menu, while the
[
• Pressing the Jump button also switches
between the menu tabs.
Press the
or
arrow on the omni
3
selector to select a menu item.
• The
arrow selects the next item, the
arrow the previous one.
Press the
selector to select setting contents.
or
arrow on the omni
4
• The
or
arrow switches between
settings.
• Press the Set button for items followed by an
ellipsis (...) and then select a setting. Press the
Set button again to confirm the setting.
Press the Menu button.
• Pressing the Menu button closes the menu and
makes the settings take effect.
• In shooting mode, the menu can be closed by
pressing the shutter button halfway.
5
Basic Functions 35
Menu Settings and Factory Defaults
This chart shows the options for each menu and the default settings.
Reference
Page
Menu Item
Resolution
Available Settings
(2048 x 1536*) / (1024 x 768) / (640 x 480)
p. 54
p. 54
p. 56
p. 77
p. 53
p. 76
p. 39
p. 78
p. 77
p. 77
p. 77
p. 92
p. 93
p. 90
p. 85
p. 86
p. 95
p. 34
p. 104
p. 34
p. 84
p. 104
p. 30
p. 94
p. 105
Compression
File Format
ISO Speed
(Superfine) /
JPEG* / RAW
(Fine*) / (Normal)
50* / 100 / 200 / 400 / AUTO
Off* / 2x / 4x
Digital Zoom
AF Mode(1)
Rec. Menu
(Red)
Continuous* / Single
Off / 2 sec.*/ 10 sec.
On / Off*
Review
File No. Reset
Contrast
-
-
-
/ 0* / +
/ 0* / +
/ 0* / +
Sharpness
Saturation
Single Erase
Erase all
Erases images one-by-one
Erases all images on the CF card
Turns image protection on and off
Rotates the image in the display
Replays selected images as in a slide show
Sets the print settings
Protect
Play Menu
(Blue)
Rotate
Slide Show
Print Order
Beep
On* / Off
LCD Brightness
Shutter Volume (Shooting)
Speaker Volume (Replaying)
Auto Power Down
Date/Time
Normal* / Bright
Off / 1 / 2* / 3 / 4 / 5
Off / 1 / 2 / 3* / 4 / 5
On* / Off
Set up Menu
(Yellow)
Sets the date and time
Format
Formats (initializes) the CF card
English* / Deutsch / Français / Español / Japanese
Language
English / Deutsch / Français / Nederlands / Dansk /
Suomi / Italiano / Norsk / Svenska / Español
Video System
NTSC / PAL
p. 105
* Default values. Default languages and video system settings vary between regions.
(1)
The setting is set to Single when the optical viewfinder is used without the LCD monitor.
• Some menu items are not available in certain shooting modes.
36 Basic Functions
Shooting - Letting the Camera
Select Settings
Auto Mode
In this mode, all you have to do is press the shutter button and let the camera do
everything else.
Turn the mode dial to
.
1
2
3
Aim the camera at the subject.
Operate the zoom lever to achieve the
desired composition (relative subject
size in the viewfinder).
Press the shutter button halfway (p. 34).
• The camera will focus on the subject and beep
twice when complete.
• The shutter speed and aperture settings are
automatically determined and show in the
display panel. They also appear on the LCD
monitor if it is on.
4
5
Press the shutter button all the way
(p. 34).
• You will hear the sound of the shutter when
the shutter activates.
• The picture will appear for 2 seconds in the
LCD monitor if it is open.
Shooting - Letting the Camera Select Settings 37
• You can change the following settings.
- Resolution: Large* / Medium / Small
- Compression: Superfine / Fine* / Normal
- Digital Zoom: Off* / On
- AF Mode:
- Review:
Continuous* / Single
2 sec* / 10 sec. / Off
- File No. Reset: Off* / On
- Flash:
Red-Eye Reduction Auto* / Auto / Off
- Drive Method: Single* / Self-Timer
- Macro:
Off* / On
* Default settings
• With the Review function, you can change the length of time images show in the
LCD monitor after shooting, or set it so they do not show at all (p. 39).
Using the Viewfinder to Shoot
The camera is equipped with an optical viewfinder. When looking through the
viewfinder, be sure to aim the autofocus crosshairs right at your subject.
Crosshairs
When looking through the viewfinder to shoot, adjust the diopter adjustment
lever until the crosshairs are as sharp as possible.
Diopter Adjustment Lever
38 Shooting - Letting the Camera Select Settings
Checking an Image Right after Shooting
Checking the Image
The following explains ways to view the photographed image in addition to
viewing it for 2 seconds in the LCD monitor when it has been opened.
Keeping the Shutter Button Pressed
The image will continue to display in the LCD monitor as long as you keep the
shutter button fully depressed.
Pressing the Set Button
If you press the Set button while the image is displayed in the LCD monitor, it will
continue to display even after the shutter button is released. Press the shutter
button halfway again to stop displaying it.
• There is a shortcut for erasing the image while it is displayed (p. 9).
Changing the Image Display Duration
With the Review function set to the default value, the photographed image
displays for 2 seconds. You can turn it off or set it for 10 seconds.
In the [ (Rec.)] menu, select [Review].
• See Selecting Menus and Settings (p. 35).
1
2
Select a Review setting and press the
Menu button.
• With the [Off] option, the image will not
automatically display. However, you can view it
if you keep the shutter button held down.
• With the [2 sec.] or [10 sec.] options, the image
automatically displays for the set duration even
if the shutter button is released.
• You can display the image longer than the 2-
or 10-second duration by keeping the shutter
button depressed or by pressing the Set button
while it is displayed.
• Another picture can be taken even while the
last is displayed.
Shooting - Letting the Camera Select Settings 39
Adjusting the Zoom (Focal Length)
Focal length can be adjusted from 7 to 21 mm (equivalent to 34 to 102 mm in 35 mm
film format).
Telephoto / Wide Angle
• Press the zoom lever toward
to zoom in
(telephoto).
• Press the zoom lever toward
to zoom out
(wide angle).
Digital Zoom
• An image already zoomed with the optical
zoom lens can be further zoomed digitally by 2
or 4 times (p. 53) and shot.
• The digital zoom combines the optical zoom with a digital teleconverter function.
The resolution is coarser than with pure optical magnification.
40 Shooting - Letting the Camera Select Settings
Using the Built-In Flash
Use the built-in flash according to the guidelines below.
(Auto)*
The flash fires automatically as required by the lighting level.
The red-eye reduction lamp always fires but the flash only fires as
required by the lighting level.
(Red-eye reduction, Auto)
(Red-eye reduction, Flash on)
(Flash on)
The red-eye reduction lamp and the flash always fire.
The flash always fires.
(Flash off)
The flash does not fire.
* No icon appears in the display panel in Auto mode.
Press the button to switch between
1
flash modes.
• The selected flash mode will show in the
display panel. It will also appear on the LCD
monitor if it is on.
Shoot the image.
2
• The flash will fire if the indicator beside the
viewfinder shines orange when the shutter
button is pressed halfway.
• Shooting procedures are the same as for the
Auto mode (p. 37).
Built-in Flash Settings
The flash cannot be used with some shooting modes.
(Auto)
©
©
*
©
©
©
©
©
*
- - - - -
-
-
(Red-eye reduction,
Auto)
©*
©
©
©*
©*
©
©
- - - - -
(Red-eye reduction,
Flash on)
-
©
©
©
©
-
©
©
©
©
©
©
©
©
-
(Flash on)
(Flash off)
-
©
©
©
©
©
©
©
©
-
©
©
©*
©*
©*
©*
©*
©
*
©
*
* Default setting.
©
©
-
Setting selection is possible.
Setting can only be selected for the first image.
Setting selection is not possible.
Shooting - Letting the Camera Select Settings 41
• The fastest shutter speed for flash synchronization is 1/250 second. The camera
automatically resets the shutter speed to 1/250 second if a faster speed is selected.
• The flash may take up to approximately 10 seconds to charge in some cases.
Actual times will vary according to usage and the battery charge.
• The flash will fire at full strength in
• The flash will automatically adjust its output in the
, and modes.
• The flash setting is saved when the camera is turned off in the
shooting modes.
mode.
,
,
,
,
,
,
,
,
,
and
• The flash will fire twice. A pre-flash will fire just before the shutter closes and will
be followed by the main flash. The pre-flash is used by the camera to obtain the
subject’s exposure data so that the main flash can be set to the optimal intensity
for the shot.
About the Red-Eye Reduction Function
A subject’s eyes can appear red in an image shot with a flash in dim lighting due
to light reflecting back from the eye’s blood vessels, which is known as the red-eye
phenomenon. The red-eye reduction lamp fires a soft pre-flash that causes the
pupils to contract, thereby lessening the chances of the eyes appearing red when
the main flash fires.
- Tell human subjects to look at the lamp since the function will not have any
effect if the subject is not looking at the red-eye reduction lamp.
- The effect is made stronger by increasing the room lighting or by approaching
closer to the subject.
42 Shooting - Letting the Camera Select Settings
Pan Focus Mode
This mode fixes the focus so that shot can be taken quickly when the shutter
button is pressed. Use this mode when you do not want to miss a shot, but you
cannot predetermine the subject’s position or focal distance. The focal length is
preset to the maximum wide angle setting.
Turn the mode dial to
• Shooting procedures are the same as for the
.
1
Auto mode (p. 37).
.
• The zoom, macro, AE lock, FE Lock, metering method, manual focus, focus, file
format (RAW), and image adjustment (ISO speed, contrast, sharpness and
saturation) settings cannot be adjusted in this mode.
• Shots can be taken within the range of 65 cm (25.6 in. ) at maximum wide angle
to infinity in this mode.
Portrait Mode
Use this mode when you want the subject to appear sharp and the background to
fade.
Turn the mode dial to .
• Shooting procedures are the same as for the
1
Auto mode (p. 37).
.
• The AE lock, FE Lock, metering method, file format (RAW), and image adjustment (ISO
speed, contrast, sharpness and saturation) settings cannot be adjusted in this mode.
• To best achieve the effect of the background gradually fading, compose the image so
that the upper half of the subject’s body fills most of the viewfinder or LCD monitor.
• The background gets increasingly indistinct the more you adjust the focal length
toward telephoto.
Shooting - Letting the Camera Select Settings 43
Landscape Mode
Use this mode to shoot expansive landscape scenes.
Turn the mode dial to
• Shooting procedures are the same as for the
.
1
Auto mode (p. 37).
• The macro, AE lock, FE Lock, metering method, file format (RAW), and image
adjustment (ISO speed, contrast, sharpness and saturation) settings cannot be
adjusted in this mode.
• Since a slow shutter speed is often selected in
mode, use a tripod to shoot if
the (camera shake warning) icon appears in the LCD monitor.
Night Scene Mode
Use this mode to capture human subjects against the backdrop of an evening sky or
night scene. The people are illuminated with light from the flash while the backdrop
is captured at a slow shutter speed so that both appear correctly exposed.
Turn the mode dial to
• Shooting procedures are the same as for the
.
1
Auto mode (p. 37).
• The macro, AE lock, FE Lock, metering method, file format (RAW), and image
adjustment (ISO speed, contrast, sharpness and saturation) settings cannot be
adjusted in this mode.
• Always use a tripod to prevent camera shake in this mode.
• Warn people to stay still for a few seconds after the flash fires because of the slow
shutter speed.
• Optional EX series Speedlites (p. 108) can also be used to shoot in mode.
• Using the mode in daylight will produce an effect similar to that of the
mode.
44 Shooting - Letting the Camera Select Settings
Black and White Mode
This mode is effective for shooting text or producing images with a nostalgic feel
to them.
Turn the mode dial to .
• Shooting procedures are the same as for the
1
Auto mode (p. 37).
• The white balance, AEB mode, AE lock, FE Lock, metering method, file format
(RAW), and image adjustment (ISO speed, contrast, sharpness and saturation)
settings cannot be adjusted in this mode.
Shooting - Letting the Camera Select Settings 45
Stitch Assist Mode
Use this mode to shoot series of overlapping frames for merging into a large image
on the computer.
Horizontal
Vertical
2 x 2
• Please use the bundled PhotoStitch program to merge the images on a computer.
Framing a Subject
PhotoStitch detects the overlapping portions of adjoining images and merges
them. When composing shots, try to include a distinctive item (landmark, etc.) in
the overlapping portions.
46 Shooting - Letting the Camera Select Settings
• Compose each frame so that it overlaps 30 to 50% of the adjoining image. Try to
keep the vertical misalignment to within 10% of the image height.
• Do not include moving items in the overlap.
• Do not try to stitch images that include both distant and close items. Objects may
appear warped or doubled up.
To Shoot a Distant Subject
As shown below, swivel the camera around its axis
to take successive shots.
To Shoot a Close
Subject
Slide the camera (move
the camera parallel to
the subject) to take
successive shots.
Vertical:
swivel up and down
or vice versa
Horizontal:
swivel left to right
or vice versa
Shooting
Images can be shot in the following 5 sequences in Stitch Assist mode.
Horizontally, left to right
Horizontally, right to left
Vertically, bottom to top
Vertically, top to bottom
Clockwise starting at the top left
Turn the mode dial to
LCD monitor.
• The LCD monitor will turn on.
and open the
1
Shooting - Letting the Camera Select Settings 47
Select the shooting sequence with the
2
or
arrow of the omni selector
and press the Set button.
• You can also press the shutter button directly
to shoot without pressing the Set button.
Shoot the first image.
• The exposure and white balance settings are
set and locked with the first image.
3
Compose and shoot the second image
so that it overlaps the first.
• Minor discrepancies in the overlap can be
4
corrected with the software.
• An image can be retaken. Press the
or
arrow of the omni selector to return to that
frame.
Sequence
Use the same procedures to shoot the
remaining frames.
• A maximum of 26 images can be recorded
5
either horizontally or vertically.
Press the Set button after the last shot.
6
Sequence
• The digital zoom, flash (auto, red-eye reduction, auto / red-eye reduction, flash
on), continuous mode, AEB mode, AE lock, FE Lock, metering method, file format
(RAW), and image adjustment (ISO speed, contrast, sharpness and saturation)
settings cannot be adjusted in this mode.
• A TV cannot be used as the monitor for shooting in this mode.
• The zoom, flash (on / off), resolution, exposure, white balance* and flash exposure
compensation settings can only be adjusted for the first image. The selected
settings are applied to the subsequent images and cannot be changed.
* A custom white balance setting cannot be set in
balance setting, first set it in another shooting mode.
mode. To use a custom white
48 Shooting - Letting the Camera Select Settings
Movie Mode
Use this mode to shoot movie frames. The resolution is automatically fixed at 320 x
240 pixels.
Turn the mode dial to and open the
1
LCD monitor.
• The LCD monitor will turn on.
Press the shutter button all the way.
• Shooting and sound recording will start
simultaneously.
• During the shooting, the elapsed time will
show in the display panel and a red circle will
appear in the upper right of the LCD monitor.
2
Press the shutter button all the way to
3
stop recording the movie.
• The maximum movie length is approximately
30 seconds (15 frames / second). Shooting
automatically stops after 30 seconds, or when
the internal memory or CF card becomes full.
• Be careful not to touch the microphone while shooting.
• The AE, AF and zoom settings are set and locked to the settings of the first frame.
• If the indicator flashes green after a shoot, this indicates that the movie is being
written to the CF card. You cannot shoot until it stops flashing.
• The digital zoom, flash, continuous mode, AEB mode, flash exposure
compensation, AE lock, FE Lock, metering method, AF mode (single), resolution,
compression, file format (RAW), and image adjustment (ISO speed, contrast,
sharpness and saturation) settings cannot be adjusted in this mode.
• Sound is recorded monaurally.
• There is no shutter sound in movie mode.
• QuickTime 3.0 or higher is required to replay movie files (AVI / Motion JPEG) on a
computer.
Shooting - Letting the Camera Select Settings 49
Macro Mode
Use the macro mode to shoot close-ups of subjects in the range of 6 to 70 cm
(2.4 in. to 2.3 ft.) at maximum wide angle and 20 to 70 cm (7.9 in. to 2.3 ft.) at
maximum telephoto.
Press the button.
• The icon will show in the display panel. It will
also show in the LCD monitor when it is on.
• Press the button again to cancel the macro
mode.
1
Shoot the image.
• The indicator beside the viewfinder will shine
yellow when the shutter button is pressed
halfway.
2
• Shooting procedures are the same as for the
Auto mode (p. 37).
• The macro mode cannot be selected in the
,
and
shooting modes.
• Use of the built-in flash may not provide an appropriate amount of light.
• Always use the LCD monitor to compose images in macro mode. The parallax
phenomenon may cause images composed with the optical viewfinder to be off-
center.
• Turning the camera off cancels the setting.
50 Shooting - Letting the Camera Select Settings
Self-Timer
You can take pictures with the self-timer in any shooting mode.
Press the
• Press the
button.
button several times to display
1
the icon in the display panel. The icon will
also appear in the LCD monitor if it is on.
• You can cancel the self-timer by pressing the
button until the icon disappears.
Shoot the image.
2
• When the shutter button is pressed all the way,
the self-timer lamp flashes and activates the
shutter approximately 10 seconds later. The
flashing gets faster 2 seconds before the
shutter activates.
• Shooting procedures are the same as for the
Auto mode (p. 37).
• Turning the camera off cancels the setting.
Shooting - Letting the Camera Select Settings 51
Continuous Mode
Use this mode to shoot successive frames while the shutter button is pressed.
Press the
button.
button several times to display
1
• Press the
the
icon in the display panel. The icon will
also appear in the LCD monitor if it is on.
• You can cancel the continuous mode by
pressing the
disappears.
button until the
icon
Press the shutter button halfway to
lock the focus.
2
3
Press the shutter button all the way to
shoot.
• While the shutter button is pressed all the way,
shots are taken at approximately 1.7 images
per second* when the image quality is set to
Large / Fine and the LCD monitor is off. Release
the shutter button to stop shooting.
*
This figure reflects standard shooting conditions
established by Canon. Actual figures may vary
according to the subject and shooting conditions.
• This mode cannot be selected in the
,
or
shooting mode.
• An externally mounted flash will not fire in this mode.
• The built-in flash can be used, but the interval between images will lengthen to
accommodate the flash recharge time.
• Successive frames can be shot until the CF card is filled.
• The interval between frames may lengthen somewhat when the internal memory
gets full.
• Turning the camera off cancels the setting.
52 Shooting - Letting the Camera Select Settings
Digital Zoom
Images can be digitally zoomed by a factor of 2 or 4 with the digital teleconverter
function.
Press the Display button to turn the
1
2
3
LCD monitor on.
Turn the mode dial to any shooting
mode except for
or
.
In the [ (Rec.)] menu, select [Digital
Zoom].
• See Selecting Menus and Settings (p. 35).
Select [2x] or [4x] and press the Menu
button.
• The LCD monitor changes to the selected
4
zoom setting.
Shoot the image.
• Shooting procedures are the same as for the
5
Auto mode (p. 37).
Zoom Setting
• This mode cannot be selected in the
file format.
and
shooting modes or for the RAW
• The digital zoom combines the image captured by the optical zoom lens with a
digital teleconverter function. The more the image is zoomed, the coarser it
becomes.
• Hold the Set button and press the zoom lever once toward the
factor to 2x and press it once more to set it to 4x.
side to set the
• When the factor is set to 4x, hold the Set button and press the zoom lever once
toward the
side to switch to 2x and once more to turn the digital zoom off.
Shooting - Letting the Camera Select Settings 53
Shooting - Selecting Particular
Effects
Changing the Resolution and Compression
Images can be shot at the following resolution and compression settings.
Resolution
2048 x 1536 pixels
Compression
Superfine
(Large)
(Medium)
(Small)
1024 x 768 pixels
640 x 480 pixels
Fine
Normal
Turn the mode dial to a shooting mode
1
2
other than
.
In the [ (Rec.)] menu, select [Resolution]
or [Compression].
• See Selecting Menus and Settings (p. 35).
Select a resolution or compression
setting and press the Menu button.
• The selected resolution and compression
3
settings will show in the display panel.
Resolution
Compression
Shoot the image.
4
54 Shooting - Selecting Particular Effects
Approximate File Size for One Image
Compression
Resolution
1722 KB
591 KB
273 KB
943 KB
329 KB
156 KB
2469 KB
(2048 x 1536)
(1024 x 768)
468 KB
174 KB
88 KB
(640 x 480)
RAW (2048 x 1536)
• This figure reflects standard shooting conditions established by Canon. Actual figures may vary according to the
subject and shooting conditions.
• Please see the list of CF cards and their approximate capacities (p. 26).
• The settings cannot be adjusted in
mode. In
mode, the resolution setting
can only be adjusted for the first image.
• The resolution and compression settings are affected by the shooting mode
selection according to the following.
Initial Shooting Mode
Next Shooting Mode
Resolution and Compression after Change
Settings change to those of the next mode
Settings do not change
Settings change to those of the next mode
Settings do not change
Settings change to those of the next mode
• The resolution and compression settings are saved when the camera is turned off.
Shooting - Selecting Particular Effects 55
Changing the File Format
The recording file format can be switched to the RAW format. With the standard
JPEG file format, the camera processes images after capturing them to produce
optimal results. This format compresses images so that more can be stored on a
single CF card. However, the compression is irreversible, meaning that the original
image data cannot be recovered after processing. In contrast, the RAW format
records the image data as captured by the camera’s CCD without further
processing. RAW images are compressed, but the compression is reversible* so that
a high-quality image can be obtained from the decompressed file without any loss
of image quality. In addition, although a RAW file is larger than an equivalent JPEG
file, it is still only approximately one-quarter the size** of an uncompressed RGB
TIFF format file, making it relatively compact.
With standard uncompressed file formats, such as RGB TIFF, images are processed
in the camera and require further processing by retouching software to adjust the
image parameters, which reduces image quality. With the RAW format, however,
the original data can be used in special software* to adjust the image parameters
(white balance, contrast, sharpness and saturation) making it possible to maintain
the image quality while making changes. The resolution (2048 x 1536) and
compression settings cannot be adjusted for these images.
*
The bundled software is required to restore RAW format data or adjust its parameters. Please consult
the separate Software Starter Guide for details.
** As measured by standard Canon test conditions.
Turn the mode dial to ,
,
or
.
1
2
In the [ (Rec.)] menu, select [File Format].
• See Selecting Menus and Settings (p. 35).
Select [RAW] and press the Menu button.
3
4
• The
icon will show in the display panel.
Shoot the image.
• This format cannot be selected for the
,
,
,
,
,
,
or
mode.
56 Shooting - Selecting Particular Effects
Program AE
Use the program AE mode to have the camera automatically set the shutter speed
and aperture settings to match the brightness of the scene.
Turn the mode dial to .
1
Press the shutter button halfway to set
the focus.
• The shutter speed and aperture settings will be
set automatically and shown in the display
panel. They will also appear in the LCD monitor
if it is on.
2
• The correct exposure has been set if the shutter
speed and aperture settings do not blink in the
display panel.
Press the shutter button all the way to
shoot the image.
3
• If an incorrect exposure will result, the shutter speed and aperture settings blink in
the display panel and show in red in the LCD monitor. Use the following methods
to shoot.
- Use the flash.
- Adjust the exposure using spot metering, exposure compensation or flash
exposure compensation.
- Switch the shooting mode to (Manual).
Differences and Similarities between the and
• Both modes automatically select the shutter speed and aperture settings.
• The following settings can be adjusted in mode, but not in mode.
Modes.
- Exposure Compensation
- AEB Mode
- White Balance
- Flash Exposure Compensation
- Built-In Flash (Red-Eye Reduction, Flash On)
- Continuous Mode
- File Format Settings
- Image Adjustment (ISO Speed, Contrast, Sharpness and Saturation) Settings
- Metering Method
- AE Lock
- Manual Focus
- FE Lock
Shooting - Selecting Particular Effects 57
Setting the Shutter Speed
When you set the shutter speed in the shutter speed-priority AE mode, the camera
automatically selects an aperture setting to match the brightness. Faster shutter
speeds allow you to catch an instantaneous image of a moving subject while
slower speeds create a flowing effect.
Turn the mode dial to
.
1
• The shutter speed will show in the display
panel. It will also appear on the LCD monitor if
it is on.
Press the
or
arrow on the omni
2
selector to select a speed.
Press the shutter button halfway to set
the focus.
• The correct exposure has been set if the shutter
speed and aperture settings do not blink in the
display panel.
3
Press the shutter button all the way to
shoot the image.
4
• If an incorrect exposure will result, the aperture setting will blink in the display
panel and show in red in the LCD monitor. Press the
selector to change the speed.
or
arrow on the omni
58 Shooting - Selecting Particular Effects
• If the aperture value is flashing or shown in red, the image is
under- or overexposed (insufficient light). Adjust the shutter
speed using the
or
arrow on the omni selector until the
flashing stops or the aperture value display turns to white.
• The nature of CCD image sensors is such that noise in the recorded image
increases at slow shutter speeds. This camera, however, applies special processing
to images shot at shutter speeds slower than 1.3 seconds to eliminate the noise,
thereby producing high-quality images. Nevertheless, a certain amount of
processing time may be required before the next image can be shot.
• At shutter speeds between 1/640 and 1/1000 second, the aperture presets to F8.0.
Shutter Speed Display
The shutter speeds from 1000 to 4 in the display are actually the denominator of a
fraction of a second. For example, 160 indicates a speed of 1/160 second. For
slower speeds, quote marks indicate the decimal place, so that 0"3 indicates 0.3
second and 2" indicates 2 seconds.
1000
80
800
60
640
40
500
30
400
25
320
20
250
15
200
10
160
8
125
6
100
4
50
13
5
0"3
5"
0"4 0"5 0"6 0"8 1" 1"3 1"6 2" 2"5 3"2 4"
6" 8"
The display of shutter speeds from 1/4 to 1/1000 second differs between the
display panel and LCD monitor.
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
. . .
Shutter Speed
Display Panel
LCD Monitor
1/1000 sec.
1/4 sec.
0.8 sec.
8 sec.
1/1000
1/4
0"8
8"
Shooting - Selecting Particular Effects 59
Setting the Aperture
When you set the aperture in the aperture-priority AE mode, the camera
automatically selects a shutter speed to match the brightness. Selecting a lower
aperture value (opening the aperture) allows you to fade the background and
create a beautiful portrait. A higher aperture value (closing it) brings the entire
range from foreground to background into focus. The larger the aperture value,
the greater the range of the image brought into clear focus.
Turn the mode dial to
.
1
• The aperture setting will show in the display
panel. It will also appear on the LCD monitor if
it is on.
Press the
or
arrow on the omni
2
selector to select a value.
Press the shutter button halfway to set
the focus.
• The correct exposure has been set if the shutter
speed and aperture settings do not blink in the
display panel.
3
Press the shutter button all the way to
shoot the image.
4
• F2.0 and F2.2 cannot be selected when the focal length has been set to the
maximum telephoto setting with the zoom lever.
• When an aperture between F2.0 and F7.1 is selected, the fastest shutter speed is
1/500 second. If an aperture of F8.0 is selected, the fastest shutter speed is 1/1000
second.
• If an incorrect exposure will result, the shutter speed will blink in the display panel
and show in red in the LCD monitor. Press the
selector to change the aperture value.
or
arrow on the omni
60 Shooting - Selecting Particular Effects
• If the shutter speed is flashing or shown in red, the image is
under- or overexposed (insufficient light). Adjust the aperture
value using the
or
arrow on the omni selector until the
flashing stops or the shutter speed display turnes to white.
Aperture Setting Display
The larger the aperture value, the smaller the lens aperture.
F2.0
F6.3
F2.2
F7.1
F2.5
F8.0
F2.8
F3.2
F3.5
F4.0
F4.5
F5.0
F5.6
The display of aperture settings differs between the display panel and LCD
monitor.
. . .
. . .
. . .
Aperture Value
Display Panel
LCD Monitor
F2.0
F8.0
F2.0
F8.0
Shooting - Selecting Particular Effects 61
Manually Setting the Shutter Speed and
Aperture
You can manually set the shutter speed and aperture to achieve a particular effect.
This is convenient for shooting fireworks and other images for which it is difficult to
set the correct exposure automatically. In addition, the shooting time is shorter in
comparison with the other modes because the AE function is not operating.
Turn the mode dial to
.
1
• The shutter speed and aperture setting will
show in the display panel. They will also appear
on the LCD monitor if it is on.
Press the
or
arrow on the omni
2
3
4
5
selector to select a shutter speed.
Press the or arrow on the omni
selector to select an aperture setting.
Press the shutter button halfway to set
the focus.
Press the shutter button all the way to
shoot the image.
• The exposure compensation, flash exposure compensation and AEB mode settings
cannot be adjusted in this mode.
• Shutter speeds between 1/640 and 1/1000 second can be selected when the
aperture is set to F8.0.
62 Shooting - Selecting Particular Effects
Adjusting the Exposure Compensation
Adjust the exposure compensation setting to avoid making the subject too dark
when it is backlit or shot against a bright background.
Press the
button once.
1
• The exposure compensation bar will appear in
the display panel. The bar will also appear in
the LCD monitor if it is on.
Press the
or
arrow on the omni
2
3
selector to select a setting.
• The settings can be adjusted in 1/3 steps in the
range of -2EV to +2EV.
Press the Set button.
• You can also take the picture with the set
exposure compensation value by pressing the
shutter button without pressing the Set button.
• To cancel the exposure compensation, return
the setting to .
Shoot the image.
4
• If you pressed the shutter button at Step 3,
the exposure compensation bar will reappear
after the shot, allowing you to change the
setting for the next shot.
• This setting cannot be adjusted in the
and
shooting modes. In
mode, it
can only be adjusted for the first image.
• The selected shooting mode will determine whether or not the exposure
compensation setting is cancelled when the camera is turned off (p. 79).
Shooting - Selecting Particular Effects 63
Setting the White Balance
When the white balance mode is set to match the light source, the camera can
reproduce colors more accurately. Set the white balance mode to a natural or
artificial light setting according to the circumstances.
(Auto)
Settings are automatically set by the camera
For recording outdoors on a bright day
For recording under overcast, shady or twilight skies
For recording under tungsten lighting
For recording under fluorescent lighting
For flash photography
(Daylight)
(Cloudy)
(Tungsten)
(Fluorescent)
(Flash)
For setting a custom value with a white sheet of paper, etc., to obtain the optimal white
balance for the conditions
(Custom)
Press the
button twice.
1
• The current white balance mode will appear in
the display panel. The white balance settings
menu will appear in the LCD monitor if it is on.
Press the
selector to select a setting.
• Please see the next page regarding the
custom setting.
or
arrow on the omni
2
3
4
Press the Set button.
• You can also take the picture in the set white
balance mode by pressing the shutter button
without pressing the Set button.
Shoot the image.
• If you pressed the shutter button at Step 3,
the current white balance mode will reappear
after the shot, allowing you to change the
setting for the next shot.
• This setting cannot be adjusted in the
can only be adjusted for the first image.
and shooting modes. In
mode, it
• The selected shooting mode will determine whether or not the white balance
setting is cancelled when the camera is turned off (p. 79).
64 Shooting - Selecting Particular Effects
Setting a Custom White Balance
You can set a custom white balance to obtain the optimal setting for the shooting
conditions by having the camera evaluate a subject such as a white piece of paper
or white cloth.
Press the
button twice.
1
• The current white balance mode will appear in
the display panel. The WB settings menu will
appear in the LCD monitor if it is on.
Press the
selector to select
or
arrow on the omni
.
2
Aim the camera at the white paper or
3
cloth and press the
button.
• Aim the camera so that the white sheet or
cloth completely fills the frame on the LCD
monitor screen or the entire viewfinder before
pressing the
button.
Press the Set button.
4
5
• You can also take the picture with the white
balance set to the selected value by pressing
the shutter button without pressing the Set
button.
Shoot the image.
• If you pressed the shutter button at Step 4,
the white balance mode will reappear after
the shot, allowing you to change the setting
for the next shot.
Shooting - Selecting Particular Effects 65
• To set and use a custom white balance setting, it is advisable to select the
shooting mode and set the exposure compensation and flash exposure
compensation to zero (±0). The correct white balance may not be obtained when
the exposure is incorrect (image is completely black or white).
• It is also desirable to use the LCD monitor to compose the shot and to zoom in to
the maximum telephoto setting.
• Since a custom white balance setting cannot be set in
balance in another shooting mode first before selecting the
mode, pre-set the white
mode.
• If the flash fires when setting a custom white balance with the flash set to auto or
red-eye-reduction auto, use the flash when you go to shoot too. The correct white
balance cannot be obtained unless the flash is used consistently. To ensure
consistency, set the flash to on or off as appropriate.
• The selected shooting mode will determine whether or not the custom white
balance setting is cancelled when the camera is turned off (p. 79).
66 Shooting - Selecting Particular Effects
Auto Exposure Bracketing (AEB Mode)
In this mode, the camera automatically changes the exposure within a set range to
take three shots after you press the shutter button once. You can adjust AEB
settings in 1/3EV steps within the range of -2EV to +2EV of the standard exposure
setting. AEB settings can be combined with exposure compensation settings to
extend the adjustment range.
Press the
times.
button three
1
• The
icon and the exposure compensation
bar will appear in the display panel. The
exposure compensation bar will also appear in
the LCD monitor if it is on.
Press the
selector to expand or contract the
or
arrow on the omni
2
3
4
range.
• The
arrow expands the range, the
arrow
contracts it.
Press the Set button.
• You can also take the picture with the set
exposure compensation value by pressing the
shutter button without pressing the Set button.
• To cancel the AEB setting, reset it to .
Shoot the image.
• If you pressed the shutter button at Step 3,
the
icon and the exposure compensation
bar will reappear after the shot, allowing you
to change the setting for the next shot.
• This setting cannot be adjusted in the
shooting modes.
,
,
,
,
,
,
,
and
• When exposure compensation is set to , the AEB exposure sequence is 0, -, and
+ according to the camera’s exposure meter.
• The AEB mode cannot be used for flash photography. If the flash fires, only one
image gets recorded.
• The selected shooting mode will determine whether or not the AEB setting is
cancelled when the camera is turned off (p. 79).
Shooting - Selecting Particular Effects 67
Adjusting the Flash Output
(Flash Exposure Compensation)
You can adjust the flash output for flash photography.
Press the
button four
1
times.
• The
icon and the flash exposure
compensation bar will appear in the display
panel. The flash exposure compensation bar
will also appear in the LCD monitor if it is on.
Press the
selector to expand or contract the
range.
• The flash exposure compensation can be
adjusted in 1/3 steps within a range of -2EV to
+2EV.
or
arrow on the omni
2
Press the Set button.
3
• You can also take the picture with the set flash
exposure compensation value by pressing the
shutter button without pressing the Set button.
• To cancel the setting, reset it to .
Shoot the image.
• If you pressed the shutter button at Step 3,
4
the
icon and the flash exposure
compensation bar will reappear after the shot,
allowing you to change the setting for the
next shot.
• This setting cannot be adjusted in the
,
and shooting modes. In
mode, it can only be adjusted for the first image.
• The selected shooting mode will determine whether or not the flash exposure
compensation setting is cancelled when the camera is turned off (p. 79).
• The flash exposure compensation mode only functions with the built-in flash or an
externally mounted EX series Speedlite (p. 108).
68 Shooting - Selecting Particular Effects
Locking the Exposure Setting (AE Lock)
You can set the exposure and focus separately. This is effective when the contrast is
too strong between the subject and background or when a subject is backlit.
Press the Display button to turn on the
1
2
LCD monitor.
Center the subject on which you want
to lock the exposure setting in the LCD
monitor and press the shutter button
halfway to set the focus.
Press the button.
• The exposure setting will lock (AE Lock) and the
icon will appear in the display panel and
LCD monitor.
3
• Pressing any button other than the shutter
button cancels the AE lock.
AE Lock Icon
Recompose the image and press the
shutter button halfway to set the focus.
4
5
Press the shutter button all the way to
shoot the image.
• This setting cannot be adjusted in the
shooting modes.
,
,
,
,
,
,
,
and
• AE lock cannot be set when the built-in or the externally mounted flash is used.
Flash Exposure Lock (FE Lock) is available in these situations (p. 70).
Shooting - Selecting Particular Effects 69
Locking the Flash Exposure Setting (FE Lock)
You can lock the flash exposure so that the exposure settings are correctly set for a
particular portion of your subject.
Press the Display button to turn on the
1
2
LCD monitor.
Set the built-in flash to fire.
• If you are using an externally mounted flash,
please refer to its manual for setting
instructions.
Center the subject on which you want to
lock the flash exposure setting in the
LCD monitor and press the shutter
button halfway to set the focus.
3
Press the button.
• The flash exposure compensation setting will
lock (FE lock) and the icon will appear in the
LCD monitor and display panel.
4
• The flash will fire a pre-flash and lock the flash
exposure to the required intensity to illuminate
the subject. (Each time you press the button,
the flash exposure locks at the required intensity
for that composition).
• Pressing any button other than the shutter
button cancels the FE lock.
70 Shooting - Selecting Particular Effects
Recompose the image and press the
shutter button halfway again to reset
the focus.
5
• Confirm that the indicator beside the
viewfinder shines orange.
Press the shutter button all the way to
shoot the image.
• As the example to the left shows, a backlit
subject can be shot at the correct exposure if
the FE lock is set when the camera is aimed at
a non-backlit portion of the subject.
6
• This setting cannot be adjusted in the
,
,
,
,
,
,
,
and
shooting modes.
• The FE Lock only functions with the built-in flash or a Canon EX-series Speedlite (p. 108).
Shooting - Selecting Particular Effects 71
Switching between Metering Modes
Center-weighted averaging is the default metering mode. This can be switched to
spot metering.
The average value from the entire image area is combined with the value measured at the
center of the viewfinder or LCD monitor.
Center-Weighted
Averaging
The area within the frame at the center of the LCD monitor is metered. This is useful when
the subject’s surroundings are bright, such as when it is backlit.
Spot
Press the Display button to turn on the
1
2
LCD monitor.
Press the
button.
• The icon and the metering frame will appear
in the LCD monitor.
• Pressing the
button again switches back to
the center-weighting averaging mode.
Press the shutter button halfway to set
the focus.
3
4
Metering Frame
Press the shutter button all the way to
shoot the image.
• This setting cannot be adjusted in the
shooting modes.
,
,
,
,
,
,
,
and
• You are recommended to use the LCD monitor to compose images in spot
metering mode. You may misalign the metering spot with the subject using the
viewfinder.
72 Shooting - Selecting Particular Effects
Shooting Problem Subjects for the Autofocus
The autofocus may not work well on the following types of subject.
- Subjects with extremely low contrast to the surroundings
- Subjects mixing close and far objects
- Subjects with extremely bright objects at the center of the composition
- Subjects that are moving quickly
To shoot these subjects, first aim the camera at an object at a similar distance, lock the
focus and recompose the image with the desired subject, or use the manual focus.
• When shooting through glass, approach as close as possible to avoid reflections off
the glass.
Shooting with Focus Lock
Focus Lock Method 1
Aim the center of the viewfinder at an object at a similar
1
2
distance to the subject you wish to shoot.
Press the shutter button halfway to lock the focus.
• The AE setting will also lock when you do this. The exposure may occasionally
be incorrect if the difference between the two items is too great. Use method 2
or the AE lock procedure when this happens.
Keep it pressed while you recompose and press the shutter
button all the way to shoot the image.
3
Focus Lock Method 2
Press the Display button to turn on the LCD monitor.
1
Aim the center of the LCD monitor at an object at a similar
distance.
2
Press the shutter button halfway to lock the focus. Keep it
3
pressed and press the
button.
• The
icon will appear in the display panel and the icon in the LCD monitor.
• The focus setting will lock even if the shutter button and MF button are released.
• The manual focus setting will cancel if the MF button is pressed again.
Shooting - Selecting Particular Effects 73
Recompose the image and press the shutter button all the
way to shoot the image.
4
• Method 2 is convenient because you can let go of the shutter button to recompose
the image.
Shooting in Manual Focus Mode
The focus can be manually set.
Press the Display button to turn the
LCD monitor on.
1
2
Press and hold the MF button and press
the
or
arrow on the omni
selector.
• The MF indicator is a
3m
1m
9.8 ft.
3.3 ft.
rough approximation
of the focusing range.
Use the number to the
left as a rough
estimate for shooting.
0.5m
1.6 ft.
0.8 ft
MF Indicator
0.25m
• The focus will lock and the
icon will show
in the display panel. The
icon and the MF
indicator will appear in the LCD monitor.
• Adjust the focus with the or arrow on
the omni selector until the image appears
focused in the LCD monitor.
• Pressing the MF button a second time cancels
the manual focus mode.
74 Shooting - Selecting Particular Effects
Press the shutter button halfway.
• The indicator beside the viewfinder will shine
yellow.
3
Press the shutter button all the way to
shoot the image.
4
• This setting cannot be adjusted in the
and
shooting modes.
• You can use the manual focus in the macro focal range (6 to 70 cm (2.4 in. to 2.3
ft.) at maximum wide angle and 20 to 70 cm (7.9 in. to 2.3 ft.) at maximum
telephoto).
• You can magnify an image afterward to check that it was shot in focus (p. 81).
Shooting - Selecting Particular Effects 75
Switching between Focus Settings
You can switch between focus settings to shoot.
The camera is continually focusing on whatever it is aimed even when the shutter
button is not pressed, allowing you to shoot without missing opportunities.
Continuous
Single
The camera only focuses when the shutter button is pressed halfway, conserving
battery power.
In the [ (Rec.)] menu, select [AF Mode].
• See Selecting Menus and Settings (p. 35).
1
2
3
Select [Continuous] or [Single] and
press the Menu button.
Shoot the image.
• These settings cannot be adjusted in the
shooting mode.
• When the LCD monitor is off and you are focusing through the viewfinder, the
setting locks in the Single mode.
• The setting is not cancelled when the camera is turned off.
76 Shooting - Selecting Particular Effects
Manually Setting Image Characteristics
The ISO speed, contrast, sharpness and saturation settings can be adjusted for shooting.
In the [ (Rec.)] menu, select one of
the above items.
• See Selecting Menus and Settings (p. 35).
1
Select a value for the item and press
the Menu button.
ISO speed
• Switch speeds when you are shooting in dark
areas or want to use a fast shutter speed.
2
• You can select from 50, 100, 200, 400 and AUTO.
• The default setting is ISO 50.
• When AUTO is selected, the camera
automatically adjust ISO between 50 and 100
only.
• Higher ISO speeds increase the image noise. To
take clean images, use as low an ISO speed as
possible.
Contrast
• Select from - (Weak), 0 (Neutral) and + (Strong).
Sharpness
• Select from - (Weak), 0 (Neutral) and + (Strong).
Saturation
• Select from - (Weak), 0 (Neutral) and + (Strong).
Shoot the image.
3
• These settings cannot be adjusted in the
,
,
,
,
,
,
and
shooting modes. In the mode, the [ISO speed] cannot be set to [AUTO].
• The setting is not cancelled when the camera is turned off.
Shooting - Selecting Particular Effects 77
Resetting the File Number
You can select the way file numbers are assigned.
File number is reset to the start (100-0001) each time a new CF card is inserted. New images recorded on
CF cards with existing files are assigned the next available number.
On
The file number of the last image to be shot is memorized so that images recorded to a new CF card start
from the next number.
Off
In the [ (Rec.)] menu, select [File No.
Reset].
• See Selecting Menus and Settings (p. 35).
1
Select [On] or [Off] and press the Menu
button.
2
• Setting the [File No. Reset] to [Off] is useful for avoiding file name duplication
when images are downloaded to a computer.
About File Numbers
• Images are assigned file numbers from 0001 to 9900 and organized in folders usually
containing up to 100 images. Folders are assigned numbers from 100 to 998.
0099
0199
100
101
0001 0002
0101 0102
0100
0200
9899
198
9801 9802
9900
Folder numbers cannot contain 99 in the last two digits.
0099
200
0001 0002
0100
Since images shot in continuous mode or Stitch Assist mode are always saved in
the same folder, some folders may contain 101 or more images.
78 Shooting - Selecting Particular Effects
Functions Available in Each Shooting Mode
This chart shows the functions available in each shooting mode.
Reference
Page
©
©
*
©
©
©
©
©
*
- - - - - -
- - - - - -
Auto (No Icon)
Red-Eye Reduction,
Auto
©*
©
©
©*
©*
©
©
Flash
Red-Eye Reduction,
Flash On
p. 41
-
©
©
©
©
- -
©
©
©
©
©
©
©
©
-
©
©
-
©
©
©
©
©
©
©
©
©
-
-
©
On
Off
©
©
©*
©*
©*
©*
©*
©
*
- -
©
©
©
©
©
p. 50
-
Macro Mode
©
*
©
©
©
©
©
*
©
©
©
©
©
*
©
*
©
*
©
©
©
©
-
*
©
*
©
*
©
©
©
©
©
©
©
©
©
©
*
©
©
©
©
©
©
©
©
©
©
*
©
©
©
©
©
©
©
©
©
©
*
©
©
©
-
*
Single Shot
- -
-
©
©
©
©
©
©
©
©
p. 52
p. 51
p. 63
p. 64
p. 67
p. 68
pp. 69, 70
p. 72
p. 74
Drive Mode Continuous
Self-Timer
©
-
©
©
©
©
©
©
Exposure Compensation
White Balance
-
©
-
- - - - - - - -
AEB Mode
-
©
©
©
©
©
©
-
-
Flash Exposure Compensation
AE Lock / FE Lock
Metering Mode (Spot Metering)
Manual Focus
- - - - - - - -
- - - - - - - -
-
-
- -
©
©
©
©
©
©
-
-
-
-
-
-
-
©
©*
©*
©
©
©
©
*
©
©
©
©
*
©
©
©
©
*
©
©
©
©
*
©
©
©
©
*
©
©
©
©
*
©
©
©
©
*
©
©
©
©
*
©
©
©
©
*
Large
©
©
©
©
©
©
p. 54
p. 54
Resolution
Medium
Small
Superfine
©
©
©
*
©
©
©
*
©
©
©
*
©
©
©
*
©
©
©
*
©
©
©
*
©
©
©
*
©*
©*
©*
©*
Compression Fine
Normal
©
©
©
©
©
©
©
©
©
*
©
©
©
©
©
*
©
©
©
©
©
*
©*
JPEG
RAW
File Format
p. 56
p. 77
p. 53
- - - - - - - -
-(1) -(1) -(1) -(1) -(1) -(1) -(1) -(1)
©
(2)
©
©
©
ISO Speed
©
©
©
©
-
©
©
©
©
©
©
©
©
- -
- -
2x
Digital Zoom
4x
©*
©*
©*
©*
©*
©*
©
©
©
©
©
©
*
©
©
©
©
©
*
©
©
©
©
©
*
©
©
©
©
©
*
Continuous
Single
Focus Settings
p. 76
p. 77
©
-
©
©
©
©
©
-
- - - - - - - -
- - - - - - - -
- - - - - - - -
Contrast
Sharpness
Saturation
*
Default setting.
©©© Setting selection is possible.
©©© Setting can only be selected for the first image.
-
Setting selection is not possible.
(Shaded Area) Setting remains in effect even when the power is turned off.
The ISO speed is automatically set between the equivalent of 50 and 100.
[AUTO] cannot be selected.
(1)
(2)
Shooting - Selecting Particular Effects 79
Replaying
Viewing Images Singly (Single Image Replay)
You can view the recorded images in the LCD monitor.
Turn the main dial to
• The last recorded image will display (Single
Image Replay).
.
1
Press the
selector to move between images.
or
arrow on the omni
2
• The
and the
arrow moves to the previous image
arrow to the next. Holding the
button down moves more rapidly between
images, but the images will not appear as
clearly.
• Press the Display button to show the data for the displayed image (p. 17).
• Press the button to quickly delete the displayed image (p. 9).
• You can change the language displayed on the LCD monitor if you hold the Set
button and press the Jump button (p. 105).
80 Replaying
Magnifying Images
In single image replay, the displayed image can be shown magnified by an
approximate factor of 2.5 or 5.
Turn the main dial to
.
1
2
Press the
button.
• The display cycles to the next magnification
mode (approximately 2.5 times, approximately
5 times, off) each time the button is pressed.
• Use the
/
/
/
arrows on the omni
selector to move the magnified area around
the image.
Magnified
approximately
2.5 times
Approximate
position
Magnified
approximately
5 times
Approximate
position
Press the
button.
3
• When the approximate magnification factor of
5 is selected, pressing the
magnification mode.
button cancels the
• Movie frames cannot be magnified with this function.
Replaying 81
Viewing Nine Images at a Time (Multi Replay)
Up to nine images can be viewed at once in Multi Replay.
Turn the main dial to
.
1
2
3
Press the
button.
• Nine images will display at once (Multi Replay).
Press the
/
/
/
arrows on
the omni selector to change the image
selection.
Movie Frame
Selected Image
• Pressing the
arrow in this row
displays the previous
set of nine images.
• Pressing the
arrow in this row
displays the next set
of nine images.
Press the
button.
4
• The selected image will display in single replay.
• Press the Display button to show the data for the displayed image (p. 17).
82 Replaying
Jumping between Images
You can jump between images in single or multi replay.
Turn the main dial to
and select
1
either single or multi replay.
Press the Jump button.
2
3
• The jump bar will display.
The displayed image(s) will change.
Single Replay
• Press the
or
arrow on the omni selector
to jump 9 images behind or ahead.
• Hold the Set button and press the
or
arrow on the omni selector to jump to the first
or last image.
Jump Bar
Multi Replay
• Press the
or
arrow on the omni selector
to jump to the previous or next set of nine
images.
• Hold the Set button and press the
or
arrow on the omni selector to jump to the first
or last set of nine images.
Jump Bar
Press the Jump button.
• The jump bar will cease displaying and the
jump mode will cancel.
4
Replaying 83
Viewing Movies
You can replay the images shot in
mode.
Turn the main dial to
• Movie images cannot be replayed in multi
replay.
.
1
Press the
selector to display an image shot in
mode.
or
arrow on the omni
2
3
Press the Set button.
• The movie images and sound will play.
• When a movie has finished playing, it will stop
and display the last frame. If the Set button is
pressed in this state, the movie will start playing
from the first frame.
Pausing and Resuming Play
• Press the Set button to pause the movie. Press
it again to resume.
Fast Forwarding / Rewinding
• Press the
or
arrow on the omni selector
to stop the movie and display the previous or
next image or movie.
• Movie images recorded on other cameras may not replay correctly. The
“Unidentified image” message will display.
• The volume at which movies replay can be adjusted in the Play menu (p. 104).
• Please adjust the audio sound level on the TV when viewing movie files on a TV.
84 Replaying
Rotating Images in the Display
Images can be rotated 90º and 270º clockwise in the LCD monitor.
Original
90º
270º
In the [
and press the Set button.
• See Selecting Menus and Settings (p. 35).
(Play)] menu, select [Rotate]
1
Press the
or
arrow on the omni
2
3
selector to select an image you want to
rotate and press the Set button.
• The image cycles to the next orientation (90º ©
270º © original) each time the Set button is
pressed.
Press the Menu button.
• The Play menu will display again. Press the
Menu button again to close the menu.
• Movie images cannot be rotated.
• When images are downloaded to a computer, the orientation of images rotated
by the camera will depend upon the software used to download the images.
Replaying 85
Automated Playback (Slide Show)
Starting a Slide Show
All images, or a selection of images, can be displayed one-by-one in an automated
slide show.
All Images
Plays all the images on the CF card in order
Slide Show 1 - 3
Plays the images selected for each show in order
In the [
(Play)] menu, select [Slide
1
Show] and press the Set button.
• See Selecting Menus and Settings (p. 35).
• The slide show menu will display.
Press the
or
selector to select [Program]. Press the
or arrow to select between [All
arrow on the omni
2
3
Images] or any one of slide [Show 1]-
[Show 3].
Press the
or
arrow on the omni
selector to select [Start] and press the
Set button.
• The slide show will start and automatically stop
when the show is done.
Pausing and Resuming a Slide Show
• Press the Set button to pause the show. Press it
again to resume.
Fast Forward / Rewinding a Slide Show
• Press the
or
arrow on the omni selector
to move on to the previous or next image.
Stopping a Slide Show
• Press the Menu button during a slide show to
stop it and display the slide show menu.
86 Replaying
Press the Menu button.
• The Slide Show menu will display again. Press
the Menu button again to close the menu.
4
• Movie images play for the length of time that they were recorded regardless of the
time set in the slide show settings.
• The power save function is disabled while a slide show plays on the camera (p. 29).
Replaying 87
Selecting Images for Slide Shows
You can mark images for inclusion in slide shows 1-3. Up to 100 images may be
marked per slide show. Images display in the order of their selection.
Display the slide show menu.
1
2
Press the
or
selector to select [Program]. Press the
or arrow to select [Show 1],
arrow on the omni
[Show 2] or [Show 3] and press the Set
button.
• A bright green bar will appear beside a show
already containing images.
Press the
,
or
arrow on the
3
omni selector to choose [Select] and
press the Set button.
Mark images to include in the show.
Single Replay
4
• Move between images with the
or
arrow on the omni selector and mark or
remove marks from images with the
arrow.
and
• The selection number and a bright green bar
will show at the top of marked images.
Multi Replay
• Press the
images).
button to switch to multi replay (3
• Press the
or arrow on the omni selector
to select an image and mark or remove marks
from images with the
and
arrow.
• You can deselect all the images in a show by
pressing the Set button, selecting [OK] with the
or
arrow and pressing the Set button
again.
• The selection number and a bright green bar
will show at the bottom of marked images.
Press the Menu button.
• The image selection screen will close.
5
88 Replaying
Adjusting the Play Time and Repeat Settings
You can change the play time for all the images in a show and have the show
repeat itself continuously.
Sets the duration that each image in a slide show is displayed. The options are any one of 3-10
seconds, 15 seconds, 30 seconds and Manual.
Play Time
Sets whether the slide show stops when all the slides have been displayed or continues to display
until stopped.
Repeat
Display the slide show menu.
1
2
Press the
or
arrow on the omni
selector to select [Set up] and press the
Set button.
Press the
or
arrow on the omni
3
4
selector to select [Play Time] or [Repeat].
Press the
selector to select a setting.
Play Time
• Select a play time with the
the omni selector.
or
arrow on the omni
or
arrow on
Repeat
• Select [On] or [Off] with the
on the omni selector.
or
arrow
Press the Menu button.
• The set up menu will close.
5
• The display interval may vary somewhat for some images.
• Slide shows can be easily edited on a computer with the supplied software. See
the Software Starter Guide.
Replaying 89
Protecting Images
You can protect important images from accidental erasure.
In the [
(Play)] menu, select [Protect]
1
and press the Set button.
• See Selecting Menus and Settings (p. 35).
Press the
or
arrow on the omni
2
selector to move to and select an image
you want to protect and press the Set
button.
• The
icon will appear on protected images.
• To remove the protection, click the Set button
again (in protection mode).
• You can make the selection of images easier by
toggling between single replay and multi replay
with the
button.
Press the Menu button.
• The protect window will close.
3
• Please note that formatting (initializing) a CF card erases all its data, including
protected images and other types of data. Please check the contents of a CF card
before formatting it.
90 Replaying
Shooting / Replaying with a TV Monitor
A video-compatible television connected via the supplied AV cable AVC-DC100 can
be used to view images as you shoot or replay them.
Turn the main dial to
that the TV is turned off.
and confirm
1
2
Attach AV cable ACV-DC100 to the A/V
OUT terminal on the camera.
To the
Plug the other ends of the AV cable to
the video in and audio in jacks on the TV.
Yellow
Plug
Video In Jack
3
4
5
Turn on the TV and switch it to Video
mode.
Black
Plug
To the
Audio In Jack
Turn the camera’s main dial to
or
.
• The image will appear on the TV. Shoot or
replay images as usual.
• If the images are not appearing on the TV
when shooting, press the Display button.
• No image will display in the LCD monitor when the camera is connected to a TV
monitor.
• The video output signal can be switched (NTSC or PAL) to accommodate different
regional standards (p. 105). The default setting will vary between regions.
NTSC: Japan, U.S.A., Canada, Taiwan, etc.
PAL:
Europe, Asia (excluding Taiwan), Oceania, etc.
• Plug the audio plug of the AV cable into the TV’s monaural jack. Please consult the
TV’s manual for details.
• A TV monitor cannot be used in
mode.
Replaying 91
Erasing
Erasing Images Singly
In the [
(Play)] menu, select [Single
Erase] and press the Set button.
• See Selecting Menus and Settings (p. 35).
1
Press the
or
arrow on the omni
2
3
selector to select the image you wish to
erase and press the Set button.
Press the
or
arrow on the omni
selector to select [OK] and press the Set
button.
• To continue erasing other images, repeat steps
2 - 3.
• To cancel instead of erasing, select [Cancel] and
press the Set button.
Press the Menu button.
• The erase window will close.
4
• Please note that erased images cannot be recovered. Exercise adequate caution
before erasing a file.
• Protected images cannot be erased with the erase function (p. 90).
• Images can be quickly deleted while they are displayed by pressing the button
(p. 9).
92 Erasing
Erasing All Images
In the [
and press the Set button.
• See Selecting Menus and Settings (p. 35).
(Play)] menu, select [Erase all]
1
Press the
or
arrow on the omni
2
selector to select [OK] and press the Set
button.
• To cancel instead of erasing, select [Cancel] and
press the Set button.
• Please note that erased images cannot be recovered. Exercise adequate caution
before erasing a file.
• Protected images cannot be erased with the erase function (p. 90).
Erasing 93
Formatting a CF Card
Format a CF card when you wish to delete all its data, not just the images.
Formatting may restore a CF card if it returns an error or if the “CF” message displays.
In the [ (Set up)] menu, select [Format]
1
and press the Set button.
• See Selecting Menus and Settings (p. 35).
Press the
or
arrow on the omni
2
selector to select [OK] and press the Set
button.
• To cancel formatting instead, select [Cancel]
and press the Set button.
• Please note that formatting (initializing) a CF card erases all data, including
protected images and other file types. Please check the contents of a CF card
before formatting it.
• When a non-Canon brand CF card is malfunctioning, reformatting it may solve the
problem.
• CF cards formatted in another camera, computer or peripheral device may not operate
correctly. When that happens, reformat the CF card with your PowerShot G1.
94 Erasing
Print Settings (DPOF Settings)
Images on a CF card can be individually selected for printing in a specified number
of copies. You can also select the print type and whether or not to print the date
and file number. These settings are compatible with the Digital Print Order Format
(DPOF) standards so that images can be printed on DPOF-compliant digital printers
or at participating photo labs.
• The
mark will display on images that have had print marks set by another DPOF-
compliant camera. These settings will be overwritten by any set by your camera.
• Print settings cannot be set for movie images or RAW images.
• The output of some digital printers or photo lab services may not reflect the
specified print settings.
Selecting Images for Printing
There are two ways to select images.
- Singly
- All images on a CF card (the number of copies is set to one per image)
In the [
(Play)] menu, select [Print
1
Order] and press the Set button.
• See Selecting Menus and Settings (p. 35).
• The Print Order menu will display.
Press the
or
arrow on the omni
2
selector to select [Order] and press the
Set button.
Print Order Menu
Print Settings (DPOF Settings) 95
Select images for printing.
3
Single Images
• When the print type (p. 98) is set to [Standard]
Number of Copies
or [Both], press the
omni selector to select an image and the
arrow to mark it for printing. You can set
or
arrow on the
or
the number of copies (up to 99) to be printed
at the same time.
• When the print type (p. 98) is set to [Index],
press the
to select an image and mark or remove marks
from images with the and arrow.
or
arrow on the omni selector
• You can use the same procedures to select
images in multi replay (3 images). Press the
button to switch between single replay and
multi replay.
All the Images on a CF Card
• Press the
button to switch to multi replay
(three images).
• You can set one copy of each image to print by
pressing the Set button, pressing the
or
arrow on the omni selector to select [Mark All],
and pressing the Set button again.
• When the print type is set to [Standard] or
[Both], the setting for the number of print
copies can be changed for each image. When
[Index] is selected, the print settings can be
deleted. For the instructions for changing
settings, please reread Step 3 from the
beginning.
• Selecting [Clear all] removes the print marks for
all the images on the CF card.
Press the Menu button.
• The selection mode will turn off and the Print
Order menu will reappear.
4
96 Print Settings (DPOF Settings)
• Images are printed in order from oldest to newest by the shooting date.
• A maximum of 998 images can be marked per CF card.
• When [Both] is selected, the number of copies can be set, but applies to standard
prints only. Only one copy can be set to print with the [Index] setting.
• Print settings can also be assigned to images with the supplied software programs
on a computer.
Print Settings (DPOF Settings) 97
Setting the Print Style
The following print settings can be selected.
Standard
Index
Prints one image per page
Print Type
Prints the selected images together at a reduced size in an index format
Prints the images in both the standard and index formats
Adds the date to the print
Both
Date
File No.
Adds the file number to the print
Display the Print Order menu.
1
2
Press the
or
arrow on the omni
selector to select [Set up] and press the
Set button.
Press the
or
arrow on the omni
3
selector to select [Print Type], [Date] or
[File No.]
Press the
or
arrow on the omni
4
selector to select a setting.
Print Type
• Press the
or
arrow on the omni selector
to select [Standard], [Index] or [Both].
Date
• Press the
to select [On] or [Off].
or
arrow on the omni selector
98 Print Settings (DPOF Settings)
File No.
• Press the
or
arrow on the omni selector
to select [On] or [Off].
Press the Menu button.
• The set up menu will close.
5
• The [Date] and [File No.] options cannot both be set to [On] when the print type is
set to [index].
• The date prints as the date and time in the format specified in the Set Date/Time
menu (p. 30).
Print Settings (DPOF Settings) 99
Resetting the Print Settings
The print settings can all be removed at once. The print type is reset to [Standard]
and the date and file number options are set to [Off].
Display the Print Order menu.
1
2
Press the
or
arrow on the omni
selector to select [Reset] and press the
Set button.
Press the
or
arrow on the omni
3
selector to select [OK] and press the Set
button.
100 Print Settings (DPOF Settings)
List of Menu Options
The chart below lists menu items and settings. See Selecting Menus and Settings
(p. 35) to learn how to select a setting.
Rec. Menu
* Some items may not appear in certain shooting modes (p. 79).
Reference
Page
Item
Resolution
Menu Screen
Settings Content
Sets the number of pixels used to record
images to CF cards.
p. 54
p. 54
p. 56
p. 77
p. 53
•
•
•
Large (2048 x 1536 pixels)
Medium (1024 x 768 pixels)
Small (640 x 480 pixels)
Sets the relative compression ratio used
to record images to CF cards.
Compression
File Format
ISO Speed
•
•
•
Superfine
Fine
Normal
Sets the file format used to record
images to CF cards.
•
•
JPEG
RAW
Sets the sensitivity at which images are
recorded.
•
•
•
•
•
50
100
200
400
AUTO
Digital Zoom
Activates the digital teleconverter
function to electronically zoom subjects.
•
•
•
Off
2x
4x
List of Menu Options 101
Reference
Page
Item
Menu Screen
Settings Content
Sets the frequency of autofocus
activation. When the LCD monitor is off,
this setting locks in single mode.
p. 76
p. 39
p. 78
p. 77
p. 77
p. 77
AF Mode
•
•
Continuous
Single
Sets the duration images display on the
LCD monitor after the shutter button is
released.
Review
•
•
•
Off
2 sec.
10 sec.
Sets how file numbers are assigned to
images when new CF cards are inserted.
File No. Reset
•
•
On
Off
Adjusts the image contrast.
Contrast
•
•
•
-
0
+
Adjusts the image sharpness.
Sharpness
Saturation
•
•
•
-
0
+
Adjusts the image saturation.
•
•
•
-
0
+
102 List of Menu Options
Play Menu
Reference
Page
Item
Menu Screen
Settings Content
Single Erase...
Erases images one-by-one (excluding
protected images). While displayed
images can also be quickly deleted by
p. 92
p. 93
p. 90
p. 85
p. 86
p. 95
pressing the
button.
Erase all...
Protect...
Erases all images from a CF card
(excluding protected images).
Protects images from accidental erasure.
Rotate...
Rotates images 90 or 270 degrees
clockwise in the display.
Slide Show...
Print Order...
Plays images in an automated slide show.
Sets the images that will be printed on a
DPOF-compatible printer or at a photo
lab service, the number of copies and
other parameters.
List of Menu Options 103
Set up Menu
Reference
Page
Item
Menu Screen
Settings Content
Sets whether or not the beep sounds
when the shutter button is pressed
halfway or when a menu operation is
performed.
Beep
p. 34
p. 32
p. 34
•
•
On
Off
Sets the brightness level of the LCD
monitor.
LCD Brightness
(Normal)
(Bright)
•
•
Adjusts the sound volume when the
shutter button is pressed all the way. The
beep does not sound while a movie is
being shot.
Shutter Volume
(Shooting)
(Off)
(1)
•
•
•
•
•
•
(2)
(3)
(4)
(5)
Playback Vol. (Replay)
Adjusts the sound volume when a movie is
played.
p. 84
(Off)
(1)
•
•
•
•
•
•
(2)
(3)
(4)
(5)
Auto Power Down
Sets whether or not the camera
automatically powers down after a
specified period of time elapses without
something being pressed.
p. 29
•
•
On
Off
104 List of Menu Options
Reference
Page
Item
Date/Time...
Menu Screen
Settings Content
Sets the date, time and date format.
p. 30
p. 94
-
Format...
Formats (initializes) a CF card.
Sets the language used in the menus and
messages on the LCD monitor. The menu
may appear differently in some regions.
Language...
•
•
•
•
•
English
•
•
•
•
•
•
•
•
•
•
English
Deutsch
Français
Nederlands
Dansk
Suomi
Italiano
Norsk
Deutsch
Français
Español
Japanese
or
Svenska
Español
You can change the language during
image replay by holding the Set button
and pressing the Jump button.
Video System
Sets the video output signal standard.
p. 91
•
•
NTSC
PAL
List of Menu Options 105
Using the Wireless Controller
Installing the Battery
Install the button battery (CR2025) into Wireless Controller WL-DC100 before use.
• Be particularly careful to keep the button batteries out of the reach of children.
Seek medical assistance immediately if a child swallows a battery since corrosive
battery fluids could damage the stomach or intestinal wall.
Place your fingertip on
in the direction of the arrow while
placing another fingertip on
removing the battery holder.
and press it
1
1
and
2
1
2
Place the button battery in the battery
holder with the negative terminal (-)
facing up.
Negative Terminal (
-)
2
3
Replace the battery holder into the
wireless controller.
Removing the Battery
To remove the button battery, pull it in
the direction of the arrow.
If you should dispose of your camera, first remove the button
battery for recycling according to the recycling system of your
country.
Bij dit produkt zijn batterijen
geleverd. Wanneer deze leeg
zijn, moet
u
ze niet weggoolen
maar inleveren als KCA
106 Using the Wireless Controller
Shooting / Replaying
The wireless controller can be used from
approximately 5 m (16.4 ft) directly in
front of the camera to shoot or replay.
Remote Sensor
Transmitter
Shooting
Press the
button on the camera until the icon appears in the display
panel, then replay with the wireless controller.
(1) Compose the image with the zoom buttons.
(2) Press the shutter button.
The camera will shoot the image 2 seconds later.
• Each press of this button cycles the LCD monitor
to the next display mode. The order is on (no
information) / on (information view) / off.
Replaying
The
icon appears in the display panel.
• In magnified mode, these buttons move the
magnified area around the image.
• In multi replay, these buttons move the image
• Display the
previous
image
selection to other image.
• The display mode changes with each press of the
button.
• The display cycles between magnifications of
approximately 2.5, 5 or normal.
• Replay
the movie
images
• Display the
next image
• Displays images in sets of nine (multi replay).
• The operable range of the wireless controller will shorten under the following
circumstances.
- When the wireless controller is used at an angle to the remote sensor.
- When strong light strikes the camera.
- When the battery is weak.
Using the Wireless Controller 107
Using an Externally Mounted
Flash (Optional)
You can make your flash photography even clearer and more natural appearing
with the use of a separately sold externally mounted flash. The camera’s auto
exposure function will operate with a Canon Speedlite 220EX, 380EX, 420EX or
550EX. Other flashes will fire at full strength. Non-Canon brand flashes may not
fire. Please check the manual for your flash. (Certain functions noted in the
manuals for the Speedlite 220EX, 380EX, 420EX and 550EX cannot be performed
when mounted on this camera. Please read this guide before using one of these
flashes on the camera.)
Attach the flash to the camera’s hot
shoe.
1
2
3
Turn the external flash on and turn the
camera’s main dial to
.
Turn the mode dial to a mode other
than
or
.
Speedlite 420EX Mounted
on the Hot Shoe
Speedlite 220EX, 380EX, 420EX or 550EX
• The flash will automatically adjust its output
in the
,
,
,
,
,
, ,
and
modes. The maximum flash synchro shutter
speed is 1/250 second.
• The flash will fire at full strength in
mode.
Manually set the shutter speed and aperture to
appropriate settings in this mode. At shutter
speeds slower than 1/250 second (maximum
flash synchro shutter speed) determine the
appropriate aperture value setting from the flash’s
guide number and the distance to the subject.
You are also recommended to set the white
balance to the
setting.
108 Using an Externally Mounted Flash (Optional)
Other Flashes
• Since other flashes fire at full strength, set the
shutter speed and aperture accordingly. At
shutter speeds slower than 1/125 second
(maximum flash synchro shutter speed)
determine the appropriate aperture value
setting from the flash’s guide number and the
distance to the subject. You are also
recommended to set the white balance to the
setting.
Press the shutter button halfway to
focus.
• The flash is charged when its pilot lamp lights
up. If the LCD monitor is on, the icon will
display.
4
5
Press the shutter button all the way to
shoot the image.
• The flash will not fire in
,
or continuous mode.
• The AEB mode cannot be used for flash photography. If the flash fires, only one
image gets recorded.
• Please note that proprietary high-voltage flashes with multi contacts or flash
accessories made by other manufacturers may cause a camera malfunction.
• A Canon Speedlite 480EG cannot be used with this camera because the flash will
not fire when mounted.
• The following functions can be used with a Speedlite 220EX, 380EX, 420EX or
550EX.
- Auto Exposure (Use the E TTL mode with a 550EX)
- FE Lock (Not available in mode)
- Daylight Synchro
- Slow Synchro
- Flash Exposure Compensation (If a 550EX is used, the range figures on the
flash’s display panel will not display correctly. Use the camera’s flash exposure
compensation function instead.)
- Auto Zoom (Not available with the 220EX)
Using an Externally Mounted Flash (Optional) 109
Using Conversion Lenses (Optional) /
Close-up Lenses (Optional)
The separately sold Conversion Lens Adapter LA-DC58 is required to use
conversion and close-up lenses with the camera, such as the separately sold Wide
Converter WC-DC58, Tele-converter TC-DC58 and Close-up Lens 250D (58 mm).
• Ensure that the wide converter, tele-converter and close-up lens are firmly screwed
onto the adapter. Injury from glass shards can occur if the lens loosen and fall off.
• Never aim the wide converter, tele-converter or close-up lens directly at the sun or
bright lights.
Wide Converter WC-DC58
Tele-converter TC-DC58
This 58 mm-threaded diameter
magnifying conversion lens is for
taking wide angle shots. The lens
augments the focal length of the
camera body’s lens by a factor of 0.8.
This 58 mm-threaded diameter
magnifying conversion lens is for
taking telephoto shots. The lens
augments the focal length of the
camera body’s lens by a factor of 1.5.
• An externally mounted flash may not automatically adjust its output when a
conversion lens is mounted on the camera. You may have to set the camera to
manual mode and set the shutter speed and aperture to appropriate settings in
this case.
• Do not attach filters or lens hoods to the wide converter or tele-converter.
• When using the built-in flash to shoot, a portion of the image may be blocked by
the wide converter or tele-converter and appear dark.
• When using the viewfinder to shoot, a portion of the image in the viewfinder may
appear to be blocked by the wide converter or tele-converter.
• Use the wide converter lens with the focal length set to the maximum wide angle
setting.
• Use the tele-converter lens with the focal length set to the maximum telephoto
setting. At other zoom settings, the image will not appear correctly.
110 Using Conversion Lenses (Optional)/Close-Up Lenses (Optional)
Close-up Lens 250D (58 mm)
This lens with a 58 mm-threaded diameter makes
macro shooting easier. With the camera in macro
mode, it can shoot subjects in the range of 12 to
20 cm (4.7 to 7.9 in) from the lens tip.
• Do not use the built-in flash to shoot when the close-up lens is installed on the
camera.
Installing the Lenses
Remove the ring from around the lens
on the camera body.
1
Ring
Screw on Conversion Lens Adapter
LA-DC58 in the direction of the arrow.
2
Screw on the lens in the direction of
the arrow.
3
Wide-Converter WC-DC58
Installed
Using Conversion Lenses (Optional)/Close-Up Lenses (Optional) 111
• Since the image seen in the viewfinder does not change when a conversion lens is
installed, use the LCD monitor to compose images.
• Please note that images will not merge properly with the bundled PhotoStitch
program on the computer when they are shot in
close-up lens installed.
mode with a conversion or
• To protect the conversion lenses, hold them with one hand while you screw them
on with the other hand.
• Completely remove all dust and dirt from conversion lenses with a lens blower
brush before use. The camera may focus on any dirt that remains.
• Exercise due caution when handling the conversion lenses since it is easy to dirty
them with fingerprints.
112 Using Conversion Lenses (Optional)/Close-Up Lenses (Optional)
Downloading Images to a
Computer
Downloading Directly from a CF Card
If you are using a notebook computer or a PC card reader, you can download
directly from a CF card placed into the separately sold PC card adapter (PCMCIA
adapter). The adapter is not required if your computer is equipped with a CF card
reader. Place the CF card directly into the reader.
Inserting the CF Card
PC Card Reader Example
Eject the CF card from the camera and
place it in the PC card adapter (optional).
1
Place the PC card adapter into the
computer’s PC card slot or into a PC
card reader.
• Some computers or PC card readers require the
power to be off when the PC card adapter is
inserted into the PC card slot. Since this
requirement varies between models, please
consult the manual for your equipment.
2
CF Card Reader Example
Eject the CF card from the camera and
1
place it in a CF card reader connected
to the computer.
• Some computers or CF card readers require the
power to be off when the CF card is inserted.
Since this requirement varies between models,
please consult the manual for your equipment.
Downloading Images to a Computer 113
Downloading Images
Please refer to the Software Starter Guide for downloading instructions.
Double-click the disk drive icon of the drive to which the CF
1
2
card is connected.
Copy the photographed images to the desired folder on the
hard disk.
• The images are contained in the [XXXCANON] folder inside the [DCIM]
folder on the CF card. The XXX represents a number from 100 to 998.
• Viewing Images Downloaded to a Computer
- To view images shot in the JPEG format, a software program handling JPEG
files, such as Photoshop , is required.
- To view images shot in the RAW format, the supplied driver software is
required.
• Viewing Movies Downloaded to a Computer
- If you attempt to view a movie file (.AVI extension) by double-clicking it in the
Windows Explorer, you may cause the Windows Media Player to start, which
will interfere with the replay. To play a movie, first start QuickTime Player and
then open the movie file from that program’s file menu. QuickTime 3.0 or a
higher version is required to start QuickTime Player. QuickTime may be
downloaded from the Apple Computer, Inc., website.
114 Downloading Images to a Computer
About File Names
IMG_XXXX.JPG (Images shot in the JPEG format)
CRW_XXXX.CRW (Images shot in the RAW format)
CRW_XXXX.THM*
DCIM
XXXCANON
STA_XXXX.JPG (Images shot in Stitch Assist mode)
MVI_XXXX.AVI (Movie)
MVI_XXXX.THM*
The folder containing the files controlling the DCIM
folder images
CANONMSC
A folder created when DPOF settings are set.
Contains the files controlling the DPOF setting contents.
MISC
* These files contain thumbnail images for the index display.
• A number will appear in place of each “X” in the file names.
• Do not open or delete files in folders other than [XXXCANON]. Those files are
required for image management.
Downloading Images to a Computer 115
Using the Supplied Interface Cables
Supported Operating Systems
Windows
Windows 95, Windows 98 (including Second Edition),
Windows Millennium Edition (Windows Me), Windows
NT 4.0 (Service Pack 3 or later), Windows 2000.
*
The USB interface is only supported for preinstalled
Windows 98/Me/2000 systems or systems upgraded to
Windows Me from preinstalled Windows 98 systems.
Macintosh Computer Mac OS 8.1 or higher
QuickTime 3 or higher.
*
The USB interface is only supported for genuine Apple
Computer brand models with built-in USB ports.
The supplied interface cables can be used to connect the camera to a computer to
download the images. First install the supplied software and then connect to the
computer using one of the methods below. Please see the separate Software
Starter Guide to learn how to install the software and download the images.
• You are recommended to use a household power source when downloading
images to a computer to avoid draining the battery pack.
USB Interface (p. 118)
• Windows and Macintosh Computers
The USB interface is fast and convenient. It transfers images faster than the serial
interface and can start software automatically when its cable is connected.
USB Cable Connector Shapes
Camera End Computer End
Computer USB Port
The USB port is
marked with
this symbol.
116 Downloading Images to a Computer
CF Card Reader or PC Card Slot (p. 113)
• Windows and Macintosh Computers
If you have a CF card reader or a notebook PC with a PC card slot (optional PC
card adapter required), or a PC card reader (optional PC card adapter required), you
can connect directly to the CF card.
CF Card Reader
PC Card Adapter
Serial Interface - for Windows 95 / NT 4.0 or Macintosh computers
lacking a built-in USB port (p. 120)
A serial cable is not included with the camera. Please arrange to purchase one to
use the serial interface.
• Windows (The separately sold Interface Cable IFC-200PCS is required)
Computer Serial Port
Serial Cable Connector Shapes
Camera End Computer End
• Macintosh (The separately sold Interface Cable IFC-200MC is required)
Computer Serial Port
Serial Cable Connector Shapes
Camera End Computer End
Serial ports
(printer, modem)
are identified with
these symbols.
Downloading Images to a Computer 117
Connecting via a USB Port
• On a Windows system, the USB interface can only be used with the USB ports on
systems purchased with Windows 98 or 2000 preinstalled. The USB ports on
systems upgraded from Windows 3.1 or 95 to Windows 98 or 2000 will not
operate correctly. The same applies to upgrades from Windows 98 to 2000.
• On a Macintosh system, the USB interface can only be used with Power Macintosh
NEW G3/G4, PowerBook G3, iMac and iBook models with built-in USB ports.
• Connect the USB cable directly to the camera and computer. A connection
through a hub may not operate correctly.
• Excluding USB mice and keyboards, connecting other USB devices at the same as
the camera may lead to malfunctions. If this happens, detach all the USB devices
and then reconnect only the camera.
• Do not connect two or more cameras to the same computer at once. A camera
malfunction may result.
• Do not place a Windows computer into standby mode or a Macintosh computer
into sleep mode when the camera is connected via a USB port. If, by chance, this
occurs, leave the camera connected to the USB port and try to revive the computer.
Some computers cannot be properly restored from standby or sleep mode when
the USB cable is subsequently detached. Please consult the manual for your
computer regarding the standby or sleep mode.
118 Downloading Images to a Computer
Connect the supplied USB cable to the computer’s USB port
1
and the camera’s Digital terminal.
• There is no need to shut off the camera or computer power when using the
USB cable.
• Please consult the manual for the computer for the position of its USB ports.
USB Port
Digital Terminal
1. Insert a fingernail in the terminal
cover’s notch to open it.
USB Cable
USB Cable
2. Align the arrows to insert the
cable into the camera.
Turn the camera’s main dial to
.
2
• Always press the PUSH button on the connector
to detach the cable from the camera’s Digital
terminal.
PUSH Button
Please consult the separate Software Starter Guide for the remaining
downloading procedures.
Downloading Images to a Computer 119
Connecting via a Serial Port
Turn the computer’s power off and turn the camera’s main
1
2
dial to
.
Connect the camera to the computer.
Windows
• Attach interface cable IFC-200PCS (optional) to the computer’s serial port
and the camera’s Digital terminal.
• Please consult the computer’s manual for the position of the serial port
(COM port).
Serial Port
Digital Terminal
1. Insert a fingernail in the terminal
cover’s notch to open it.
Serial Cable
Serial Cable
2. Align the arrows to insert the
cable into the camera.
Macintosh Computer
• Attach interface cable IFC-200MC (optional) to the computer’s printer or
modem port and the camera’s Digital terminal.
• Please consult the computer’s manual for the position of the printer and
modem ports.
• If AppleTalk is set to use the printer or modem port, open the Apple menu
and select [Chooser] to set AppleTalk to [Inactive].
Printer Port Modem Port
Digital Terminal
1. Insert a fingernail in the terminal
cover’s notch to open it.
Serial Cable
Serial Cable
2. Align the arrows to insert the
cable into the camera.
120 Downloading Images to a Computer
Turn on the computer.
3
4
Turn the camera’s main dial to
.
• Always press the PUSH button on the connector
to detach the cable from the camera’s Digital
terminal.
PUSH Button
Please consult the separate Software Starter Guide for the remaining
downloading procedures.
Downloading Images to a Computer 121
Appendices
Replacing the Button Battery
If the Set Date/Time menu appears when you turn on the camera power, the button
battery charge is low and the date and time settings have been lost. Please replace the
battery with a generic CR2016 lithium button battery with the following procedures.
The button battery is preinstalled at the factory and may therefore expire earlier
than its rated lifespan after the camera has been purchased.
• Be particularly careful to keep the button batteries out of the reach of children.
Seek medical assistance immediately if a child swallows a battery since corrosive
battery fluids could damage the stomach or intestinal wall.
Turn the main dial to
.
1
2
Slide the battery cover lock in the
direction of the arrow and push the
battery cover open.
Remove the battery pack.
3
4
1
Push point ©©©with your fingertip while
pulling the button battery holder out
to remove it.
1
Insert a fingernail into the groove in
the button battery and push it out in
the direction of the arrow.
5
Groove
122 Appendices
Negative Terminal (
-)
Place a new button battery into the
button battery holder with the
negative terminal (-) facing upward.
6
7
Replace the button battery holder,
replace the battery pack and close the
battery cover.
If you should dispose of your camera, first remove the button
battery for recycling according to the recycling system of your
country.
Bij dit produkt zijn batterijen
geleverd. Wanneer deze leeg
zijn, moet
u
ze niet weggoolen
maar inleveren als KCA
Appendices 123
Camera Care and Maintenance
Use the following procedures to clean the camera body, lens, viewfinder, LCD
monitor and other parts.
Camera body
Wipe the body clean with a soft cloth or eyeglass
lens wiper.
Lens
First use a lens blower brush to remove dust and
dirt, then remove any remaining dirt by wiping the
lens lightly with a soft cloth.
• Never use synthetic cleansers on the camera body
or lens. If dirt remains, contact the nearest Canon
Customer Support Help Desk (see the back of
this guide).
Viewfinder / LCD monitor
Use a lens blower brush to remove dust and dirt.
If necessary, gently wipe the viewfinder and LCD
monitor with a soft cloth or an eyeglass lens wiper
to remove stubborn dirt.
• Never rub or press forcefully on the LCD monitor.
These actions may damage it or lead to other
problems.
• Never use thinners, benzene, synthetic cleansers or water to clean the camera.
These substances may distort or damage the equipment.
124 Appendices
Troubleshooting
Problem
Cause
Solution
Camera will
not operate
Power is not turned on
•
Turn the main dial to a position other than
.
Battery cover or CF card slot
cover is open
•
•
Confirm that the battery cover is securely closed.
Confirm that the CF card slot cover is securely closed.
Insufficient battery voltage
([Lb] flashes in display panel)
•
Fully charge the battery or use a household power
source.
Poor contact between
camera and battery
terminals
•
Wipe the terminals with a clean, dry cloth.
Camera will
not record
Main dial is set to
or
,
•
•
Turn the main dial to
(Shooting).
Flash is charging (flashing
orange indicator)
Wait until the orange indicator stops flashing and
shines steadily, signaling that the flash is charged, then
press the shutter button.
CF card full
•
•
Insert a new CF card.
If required, download the images to a computer and
erase them from the CF card to make space.
CF card not formatted
correctly
•
•
Format CF card. © See Formatting a CF card (p. 94)
If reformatting doesn't work, the CF card logic circuits
may be damaged. Contact the nearest Canon
Customer Support Help Desk.
Lens will not
retract
Battery cover or CF card
slot cover opened
immediately after main dial
turned to
•
•
Close the battery cover or CF card slot cover, and then
turn the main dial on and back to
.
Battery cover or CF card
slot cover opened while
camera was recording to
the CF card (warning
signal)
Close the battery cover or CF card slot cover, and then
turn the main dial to
.
Battery pack
consumed
quickly
Battery pack capacity
reduced because of disuse
for one year or more
•
Replace the battery pack with a new one.
Battery life exceeded
Appendices 125
Problem
Cause
Solution
Battery pack
will not charge
Main dial is not turned to
.
• Turn the main dial to
.
Battery life exceeded
• Replace the battery pack with a new one.
Poor contact between
camera and compact
power adapter
• Plug the compact power adapter's DC plug more firmly
into the camera's DC IN terminal.
• Connect the power cord to the compact power adapter
and insert its plug firmly into the electrical outlet.
Camera moved
• Be careful not to move the camera when pressing the
Image is
shutter button.
blurred, out of
focus, or not
as expected
Autofocus function
hampered by obstruction
to AF auxiliary light emitter
• Be careful not to block the AF auxiliary light emitter with
your finger or other items.
Subject out of focal range • Ensure that there is at least 70 cm (2.3 ft.) between the
camera lens and subject.
• Use the macro mode to shoot close-ups between 6 and
70 cm (2.4 in. and 2.3 ft.) at maximum wide angle and
20 and 70 cm (7.9 in. and 2.3 ft.) at maximum
telephoto.
Subject is too
dark
Insufficient light for
shooting
• Set the built-in flash to on.
• Use a high-output externally mounted flash.
Subject dark in comparison • Set the exposure compensation to a positive (+) setting.
to the background
• Use the AE lock or spot metering function.
Subject too far for flash to • To use the built-in flash, shoot within 70 cm to 4.5 m
reach
(2.3 to 14.8 ft.) of the subject at the maximum wide
angle and within 70 cm to 3.6 m (2.3 to 11.8 ft.) at the
maximum telephoto setting.
• Use an externally mounted flash with a large output.
Subject is too
bright
Subject too close
• If you are using a flash, adjust the flash output with the
flash exposure compensation function (p. 68).
Subject bright in
comparison to the
background
• Set the exposure compensation to a negative (-) setting.
• Use the AE lock or spot metering function.
Light shining directly on
subject or reflected off
subject into camera
• Change the shooting angle.
Flash set to On
Flash set to Off
• Set the flash to Auto or Off.
Flash will not
fire
• Set the flash to Auto or On.
Image not
showing on TV
Incorrect video system
setting
• Set the video system to the appropriate setting, NTSC or
PAL, for your TV ©©(See Set up Menu, p. 105).
Zoom does not
operate
Mode dial is turned to
.
• Turn the mode dial to any shooting mode except for
.
Zoom lever was pressed
while shooting in movie
mode.
• Operate the zoom before shooting in movie mode.
126 Appendices
List of Error / Message Codes
The following error and message codes may appear on the display panel.
Error Codes
:
The camera has experienced a problem. Turn the main dial to
, wait
(xx: number)
a second, and then try shooting or replaying. If the error code appears
repeatedly, there is a problem. Note the error code number and take
the camera in for servicing. If an error code appears immediately after
a shot, there is a chance that the image was not recorded. Check the
image in replay mode.
Message Codes
:
:
Replaying image.
Connected to computer in PC connection mode.
Adequate battery charge.
:
:
Low battery charge. Charge the battery as soon as possible to use for
any length of time.
:
Battery charge low, camera will not operate. Immediately recharge or
replace the battery pack with a charged one.
Could also indicate that the battery cover is open. Close the cover
securely.
:
No CF card in camera, CF card slot cover is open, or CF card error.
:
Power turned on with lens cap on. Remove cap, then turn power off
and on again.
Appendices 127
List of Messages
The following messages may appear on the LCD monitor.
Busy...
Image is being recorded to, or read from, CF card.
No CF card:
You attempted to shoot or replay images without a CF
card installed.
Cannot record!:
You attempted to shoot an image without a CF card
installed.
CF card error!:
CF card full:
CF card has experienced an anomaly.
CF card is too full to accommodate more images or
print settings.
Naming error!:
The file could not be created because there is a file with
the same name as the directory that the camera is
attempting to create, or the highest possible file
number has already been reached. In the Rec. menu,
please set [File No.] Reset to [On]. After you save all the
images you wish to retain onto a computer, format the
CF card (p. 94). Please note that formatting will erase
all the existing images and other data.
Change the battery pack: Battery charge is insufficient to operate the camera.
Replace it immediately with a charged battery pack or
recharge it.
No image:
No images recorded on CF card.
Image too large:
You attempted to replay an image larger than 3200 x
2400 pixels.
Incompatible JPEG format: You attempted to replay an incompatible JPEG file.
Corrupted data:
RAW:
You attempted to replay an image with corrupted data.
You attempted to replay an image recorded in an
incompatible RAW format.
Cannot magnify!:
Cannot rotate:
You attempted to magnify an image that was
photographed with another camera, recorded in a
different format, or edited on a computer.
You attempted to rotate an image that was
photographed with another camera, recorded in a
different format, or edited on a computer.
128 Appendices
Unidentified Image
You attempted to replay an image that was recorded
in a special format (proprietary format used by the
camera of another manufacturer, etc.).
Protected!:
You attempted to erase a protected image.
Too many marks:
Too many images have been marked for printing or
for inclusion in a slide show. Cannot process any
more.
Cannot mark image:
You attempted to set the print settings for an non-
JPEG file.
Cannot complete!:
Cannot edit:
Couldn’t save the print or slide show settings.
Slide show settings file is corrupted
Appendices 129
Specifications
PowerShot G1
Image sensor:
Lens:
Approx. 3.34 million-pixel (total) / 1/1.8 inch CCD
(Effective number of pixels: approx. 3.24 million)
7 (W) - 21 (T) mm (35mm film equivalent: 34 - 102mm)
F 2.0 (W) - 2.5 (T)
Digital tele-converter:
Autofocus method:
2x, 4x (Maximum 12x digital zoom is available when
combined with optical zoom)
TTL autofocus (continuous or single)
Focus lock and Manual focus are available
Focusing range:
(from tip of the lens barrel)
Normal AF:
Macro AF:
70 cm (2.3 ft.) - ∞
6 cm (W) / 20 cm (T) - 70 cm
(2.4 in. (W) / 7.9 in. (T) - 2.3 ft.)
Manual focus: 6 cm (W) / 20 cm (T) - ∞
(2.4 in. (W) / 7.9 in. (T) - ∞)
Shutter:
Mechanical shutter + electronic shutter
Shutter speeds:
8
-
1 / 1000 sec.
8 sec. shutter is available in Shutter-Priority mode or Manual
mode
High-speed shutter settings from 1/640 to 1/1000 sec. are
available only at F8 aperture setting
Slow shutter speeds of 1.3 sec. or more operates with noise
reduction
Sensitivity
(equivalent film speed) :
Auto, ISO 50, ISO 100, ISO 200 and ISO 400 equivalent
(In Auto mode, camera automatically adjusts sensitivity in
the range of ISO 50 to ISO 100 equivalent)
Light metering method:
Exposure control method:
Center-weighted average metering or Spot metering
Program AE, Shutter-priority AE, Aperture-priority AE or
Manual exposure control
AE lock is available
Exposure compensation:
White balance:
± 2.0EV (in 1/3-stop increments)
Auto exposure bracketing (AEB) is available
TTL auto white balance, pre-set white balance (available
settings: Daylight, Cloudy, Tungsten, Fluorescent or Flash) or
Custom white balance
Built-in flash:
Operating modes: Auto, Red-eye reduction auto,
Red-eye reduction On, On or Off
Flash range:
70 cm - 4.5 m (2.3 ft. - 14.8 ft.) (W),
70 cm - 3.6 m (2.3 ft. - 11.8 ft.) (T)
(When sensitivity is set to ISO 100
equivalent)
(W): wide angle (T): telephoto
130 Appendices
Terminals for external flash:
Sync-terminals at accessory shoe
Use of following external flashes is recommended:
Canon Speedlite 220EX, 380EX, 420EX and 550EX
Flash exposure compensation: ± 2.0EV (in 1/3-stop increments)
Shooting modes:
Auto
Creative zone: Program, Shutter speed priority, Aperture
priority and Manual
Image zone:
Pan-focus, Portrait, Landscape, Night scene,
Black & white, Stitch Assist and Movie
Self-timer:
Activates shutter after a 10-sec. delay
Wireless control:
Shooting and playback are available (wireless controller is
included in the camera kit)
When shooting, image is captured 2 seconds after shutter
button pressed
PC-connected shooting:
Continuous shooting:
Available (USB connection only. Exclusive software program is
included in the camera kit)
Approx. 1.7 image/sec.
(Large / Fine mode with LCD viewfinder off)
Optical viewfinder:
LCD viewfinder:
Real-image optical zoom viewfinder
1.8-inch, low-temperature polycrystalline silicon TFT color
LCD
Storage media:
CompactFlash™ (CF) card (Type I and Type II)
File format:
Design rule for Camera File system, DPOF-compliant
Image recording format:
Still images:
Movies:
JPEG or RAW
AVI (Image data: Motion JPEG, Audio
data: WAVE [monaural])
JPEG compression mode:
Super fine, Fine or Normal
Number of recording pixels:
Still images:
Large: 2048 x 1536 pixels
Medium: 1024 x 768 pixels
Small: 640 x 480 pixels
Movies:
320 x 240 pixels at 15 frames/sec., up to
approx. 30 sec. per movie
Playback modes:
Interface:
Single, Multi (9 thumbnail images), Magnified (approx. 2.5x
or 5x on build-in LCD monitor) or Slide show
Universal Serial Bus (USB), RS-232C (Printer Port or Modem
Port for a Macintosh computer), Audio/Video Output (NTSC
or PAL selectable, monaural audio) and CF card slot
(complied with CF Type II standard)
Power source:
1. Rechargeable Lithium-ion battery (type: BP-511)
(included in the camera kit)
2. AC adapter (included in the camera kit)
3. Car battery adapter (Optional Charge Adapter/Car
Battery Cable Kit CR-560 is required)
Operating Temperatures:
0 - 40º C (32 - 104º F)
Appendices 131
Operating Humidity:
10 - 90 %
Dimensions (W x H x D):
119.7 x 76.8 x 63.8 mm (4.7 x 3.0 x 2.5 in.)
(excluding protrusions)
Weight:
Approx. 420 g (14.8 oz.) (camera body only)
Battery Pack BP-511
Rechargeable lithium ion cell
7.4 V
Type:
Nominal voltage:
Nominal amperage:
Charge cycles:
Operating temperatures:
Dimensions:
1100 mAh
Approx. 300
0 - 40º C (32 - 104º F)
38 x 55 x 21 mm (1.5 x 2.2 x 0.8 in.)
Approx. 70 g (2.5 oz.)
Weight:
Compact Power Adapter CA-560
AC 100 - 240 V (50/60 Hz)
Input voltage:
Rated output:
Operating temperatures:
Dimensions:
9.5 V / 2.7 A
0 - 40º C (32 - 104º F)
57 x 28 x 104 mm (2.2 x 1.1 x 4.1 in.) (camera body only)
Approx. 180 g (6.3 oz.)
Weight:
Wireless Controller WL-DC100
Lithium button battery CR2025
0 - 40º C (32 - 104º F)
Power supply:
Operating temperatures:
Dimensions:
35 x 6.5 x 56.6 mm (1.4 x 0.3 x 2.2 in.)
Approx. 10 g (0.4 oz.)
Weight:
CompactFlash™ Card
Type I
Card slot type:
Dimensions:
Weight:
36.4 x 42.8 x 3.3 mm (1.4 x 1.7 x 0.1 in.)
Approx. 10 g (0.4 oz.)
132 Appendices
Charge Adapter / Car Battery Cable Kit CR-560 (Optional)
• Charge Adapter CG-560
Input voltage:
Input current:
Nominal output:
Operating temperatures:
Dimensions:
DC 9.5 V
DC 2.5 A 2.7 A (DC 9.5V when charging the battery pack)
DC 8.4 V 1.6 A
0 - 40º C (32 - 104º F)
93 x 36 x 71 mm (3.7 x 1.4 x 2.8 in.)
Approx. 140 g (5.0 oz.)
Weight:
• Car Battery Cable CB-560
Supported vehicles:
Cigarette lighter socket powered by a negative ground, DC
12 V or 24 V car battery
Fuse:
125 V / 4 A
Length:
Weight:
Approx. 1.8 m (6.0 ft.)
Approx. 80 g (2.8 oz.)
Appendices 133
Wide Converter WC-DC58 (Optional)
Magnification:
Focal length:
Approx. 0.8x
∞
Lens configuration:
3 groups 3 pieces
Focusing range
(from tip of lens):
10 mm - ∞ (0.4 in. - ∞) (when attached to a PowerShot G1
at maximum wide angle)
Thread diameter:
58 mm Standard filter threads (Conversion Lens Adapter
LA-DC58 is required to install the lens on a PoweShot G1)
Dimensions:
Weight:
Approx. ø 80 x 40 mm (ø 3.1 x 1.6 in.)
Approx. 157 g (5.5 oz.)
Tele-converter TC-DC58 (Optional)
Magnification:
Focal length:
Approx. 1.5x
∞
Lens configuration:
2 groups 3 pieces
Focusing range
(from tip of lens):
400 mm - ∞ (1.3 ft. - ∞) (when attached to a PoweShot
G1 at maximum telephoto)
Thread diameter:
58 mm Standard filter threads (Conversion Lens Adapter
LA-DC58 is required to install the lens on a PoweShot G1)
Dimensions:
Weight:
Approx. ø 65 x 37 mm (ø 2.6 x 1.5 in.)
Approx. 117 g (4.1 oz.)
Close-up Lens 250D (58 mm) (Optional)
Focal length:
250 mm
Focusing range
(from tip of lens):
120 - 200 mm (4.7 x 7.9 in.) (when attached to a
PowerShot G1)
Thread diameter:
58 mm Standard filter threads (Conversion Lens Adapter
LA-DC58 is required to install the lens on a PoweShot G1)
Dimensions:
Weight:
Approx. ø 60 x 12 mm (ø 2.4 x 0.5 in.)
Approx. 80 g (2.8 oz.)
• All data is based on Canon’s standard testing methods. Subject to change without notice.
134 Appendices
Index
A
D
AEB Mode 67
AE Lock 69
AF Mode 102
Aperture-Priority AE (
Aperture Settings 60
Date/Time 30
Date Battery 122
DC Cable 23
DC IN Terminal 10, 18
Digital Print Order Format (DPOF) Settings
95, 103
)
60
Auto Mode (
)
37
Auto Exposure Bracketing (AEB Mode) 67
Autofocus 73
Difficult Subjects 73
Auto Replay (Slide Show) 86
A/V Out Terminal 10, 91
Digital Terminal 10, 119, 120, 121
Digital Zoom 53, 101
Diopter Adjustment Lever 12, 38
Display Modes 15
Detailed 15
Simple 15
Display Panel 14
B
Battery Check Icon 20
Battery Pack 18
Charging 18
Handling Precautions 19
Installing 20
Downloading Images to a Computer 113
DPOF 95
E
Erasing
Performance 21
Beep On/Off 34, 104
Black and White Mode (
Brightness 104
LCD Monitor 104
Built-in Flash 10, 41
Button Battery 122
All Images 93, 103
Displayed Images 9, 92, 103
Single Images 92, 103
Error Codes 127
Exposure
AEB 67
AE Lock 69
)
45
Aperture-Priority AE (
Compensation 54, 101
Flash Exposure Compensation 68
)
60
C
Camera Care and Maintenance 124
CF Card 26
Formatting 94, 105
Shutter Speed-Priority AE (
White Balance 64
)
58
Handling 27
Installing 26
Exposure Compensation 63
Externally Mounted Flash 108
Recording Capacity 26
Charge Adapter/Car Battery Cable Kit 23
Cleaning 124
F
FE Lock 70
CompactFlash™ Card 26
Compact Power Adapter 22
Components Guide 10
Compression 54, 101
Computer 113
File Format 56, 101
File No. Reset 78, 102
File Numbers 78
Flash 41
Built-in 41
Downloading 113, 114
Interfaces 116, 117
System Requirements116
Externally Mounted 108
Flash Exposure Compensation 68
Focal Length 40
Continuous Mode (
Contrast 77, 102
)
52
Conversion Lens Adapter 110, 111
Creative Zone 13
Index 135
Focus
Auto 73
Continuous 76
Lock 73
Menu
List of Options 101
Play 36
Rec 36
Manual 74
Settings 76
Single 76
Selecting Menus and Settings 35
Set up 36
Message Codes 127, 128
Metering
Format 94, 105
Center-Weighted Averaging 72
Spot 72
Mode Dial 13
H
Hot Shoe 12, 108
Household Power Source 22
Movie (
)
49
I
Shooting 49
Replaying 84
Image Characteristics 77
Contrast 77
N
ISO Speed 77
Saturation 77
Sharpness 77
Night Scene Mode ( ) 44
P
Image Zone 13
Indicators 12
Information View 16
Interface 116
Cables 116
CF Card 117
Serial 117, 120
USB 117, 118
ISO Speed 77, 101
Pan Focus (
PC Connection Mode 13
Play 80
Portrait Mode ( ) 43
Program AE ( ) 57
Protect 90, 103
Print Settings 95
Selecting Images 95
Print Style 98
)
43
Resetting 100
Power On/Off 29
Power Save 29, 104
J
Jump 83
L
R
Landscape Mode (
)
44
RAW File Format 56
Recording File Format 56
Red-Eye Reduction Function 41
Remote Sensor 10, 107
Replay
Language Settings 105
LCD Monitor
Brightness 104
Using 32
Lens Cap 28
Jumping 83
Lens installation 111
Conversion Lens Adapter 111
Close-Up 111
Tele-converter 110
Wide converter 110
LCD Monitor 80
Magnifying Images 81
Movies 84
Multi Replay 82
Rotating 85
M
Single Image Replay 80
Slide Show 86
Switching from Shooting Mode 31
TV 91
Volume 104
Resolution 54, 101
Rotate 85, 103
Macro Mode ( ) 50
Magnifying Images 81
Main Dial 13
Manual
Exposure (
Focus (
)
62
)
74
Setting Image Characteristics 77
Shooting Mode 62
136 Index
S
W
Saturation 77, 102
Self-Timer 51
Serial Port 117, 120
Sharpness 77, 102
Shooting 31
Checking Images 39
Switching from Replay Mode 31
TV Monitor 91
WAV Files 17
White Balance 64
Wide Angle 40
Wide converter Lens 110
Wireless controller 106
Installing / Removing the Battery 106
Replay 107
Shooting 107
Shooting Mode 79
Functions Available 79
Shutter
Shutter Speed Priority AE (
Speed 58
Z
Zoom 40
)
58
Volume 34, 104
Shutter Button 34
Pressing Halfway 34
Pressing Fully 34
Single Image Replay 80
Slide Show 86, 103
Play Time 89
Repeat 89
Selecting Images 88
Starting 86
Soft Case 28
Speaker 10
Specifications 130, 131, 132, 133
Spot Metering 72
Stitch Assist Mode (
)
46
Framing Subjects 46
Shooting 47
Strap 28
T
Telephoto 40
Tele-converter Lens 110
Troubleshooting 125
U
USB Port 118, 119
V
Video System 105
Viewfinder
LCD Monitor 12, 15, 32
Optical 11, 38
Volume
Replay 104
Shooting 104
Index 137
Canon Customer Support
Canon Inc.
30-2 Shimomaruko 3-chome, Ohta-ku, Tokyo
146-8501, Japan
NORTH AMERICA
Canon U.S.A., Inc.
Canon Customer Care Center
Phone (US): 1-800-828-4040 (Available Mon. - Fri., 9 AM to 8 PM Eastern Time)
Canon Canada Inc.
Phone (Canada): 1-800-OK-CANON (1-800-652-2666) (24 hours/day, 7 days/week)
EUROPE
Europe, Africa & Middle East
Canon Europa N.V.
PO Box 2262, 1180 EG Amstelveen, The Netherlands
Canon (UK) Ltd.
Helpdesk
Tel.: 08705 143 723 (Calls may be recorded.) Fax.: 08705 143 340
Canon France S.A.
Hotline : 01.41.99.70.70
Tél : 01.41.99.77.77 Télécopie : 01.41.99.79.51
Canon Photo Vidéo France S.A.
Support Client : 01.41.30.15.15
Fax : 01.41.30.15.05
Canon Deutschland GmbH
Canon-Hotline-Service:
Customer Support: (02151) 349-555
Info Desk: (02151) 349-566 Fax: (02151) 349-588
Canon Euro-Photo GmbH
Customer-Support: (02154) 495-482 or 483 Fax: (02154) 495-489
Canon Italia S.p.A.
Pronto Canon: 02 8249 2000
Canon Belgium N.V. / S.A.
Helpdesk: 0900-10627
Tel.: (02) 722.04.11 Fax: (02) 721.32.74
Canon Luxembourg S.A.
Tel.: (352) 48 47 961 Fax: (352) 48 47 96232
Canon Nederland N.V.
Helpdesk: 023 - 5 681 681
Tel.: 023 - 5 670 123 Fax: 023 - 5 670 124
Canon Danmark A/S
Canon España S.A.
Help Desk: 906 301 255
138 Canon Customer Support
Canon Norge as
Tlf. 22 62 93 21 Faks: 22 62 06 15
E-mail: [email protected]
Finland
Canon OY
Puhelin: 010 54420 Fax: 010 544 4571
Help Desk: 0600 0 22606 (14,80 mk/min+pvm) Help Desk: 0600 0 22666 (enint. 40mk/puhelu+pvm)
Canon (Schweiz) AG
Tel. 01-835-6161 Fax 01-835-6526 Hotline 0900 57 55 20
Canon Svenska AB
Tel: 08-744 85 00 Fax: 08-744 64 65
Austria
Canon GmbH
Oberlaaerstraße 233 A-1100 Vienna
Tel: 01 680 88-0 Fax: 01 680 88-308
OCEANIA
Canon Australia Pty. Ltd.
Info-Line: (02) 9805 2864
Canon New Zealand Ltd.
Info-Line: 0900-522666
ASIA
Canon Singapore Pte. Ltd.
79 Anson Road, #09-01 / 06, Singapore 079906
Phone: (65) 532 4400 Fax: (65) 221 7577
Canon Hongkong Co., Ltd.
9/F, The Hong Kong Club Building, 3A Chater Road, Central, Hong Kong
Phone: 852-2739-0802 Fax: 852-2369-7701
Canon Marketing Services
No.1 Jalan Kilang Timor, #09-00, Pacific Tech Centre, Singapore 159303
Phone: (65) 799 8888 Fax: (65) 273 3317
Canon Marketing (Malaysia) Sdn. Bhd.
Wisma General Lumber, Block D, Peremba Square, Saujana Resort, Section U2, 40150,
Shah Alam, Selangor Darul Ehsan, Malaysia
Phone: (60) 3 744 6000, (60) 3 745 0055
Fax: (60) 3 745 0505
Canon Marketing (Thailand) Co., Ltd.
10th Floor, Bangkok City Tower, 179/34-45 South Sathorn Road, Bangkok 10120, Thailand
Phone: (662) 344 9999
Fax: (662) 344 9910
Canon Marketing (Hongkong) Co., Ltd.
10/F, Mirror Tower, 61 Mody Road, Tsimshatsui East , Kowloon HongKong
Phone: 852-2170-2828
Fax: 852-2723-9684
Canon Customer Support 139
140
FCC Notice
(Digital Camera, Model PC1004)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions;
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for Class B digital
devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable with the ferrite core provided with the Digital Camera is required to
comply with Class B limits in Subpart B of Part 15 of the FCC rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the
manual. If such changes or modifications should be made, you could be required to stop
operation of the equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516) 328-5600
Canadian Radio Interference Regulations
THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFER-
ENCE CAUSING EQUIPMENT REGULATIONS.
Réglementation canadienne sur les interférences radio
CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU
REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA.
H-IE-040-V1
CY8-9020-010-000
0900CH21.3
© 2000 CANON INC.
PRINTED IN JAPAN
|