High Definition
Digital Set Top Box
With USB Record
DFTA46R
Toll FreeWarranty and Service: 1800 509394
The Gold Technical Support Line:1902 215 259
(Charges will applyat $2.95 perminute for gold
technical support only)
The symbol indicatesthat dangerous voltagesconstituting a riskof
electric shock arepresent within thisunit.
The symbol indicatesthat there areimportant operating and
maintenance instructions inthe literature accompanyingthis unit.
This symbol indicatesthat this productincorporates double insulation
between hazardous mainsvoltage and useraccessible parts.when
servicing use onlyidentical replacement parts.
CAUTION:
When the apparatuswas in electrostaticcircumstance, it maybe
malfunction and needto reset byuser.
The USB memorystick should beplug in theunit directly. USB
extension cable shouldnot be usedto avoid failingof data transferring
and interference caused.
This marking indicates that this product should not be disposed with
other household wastes throughout the EU. To prevent possible harm
to the environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and
collection systems or contact the retailer where the product was
purchased. They can take thisproduct for environmentalsafe recycling.
2
Introduction
Thank you for buying this Bush product, which is designed to give you many
years of trouble-free service.
You may already be familiar with using a similar unit, but please take time to
read these instructions. They are designed to familiarise you with the unit s
many features and to ensure you get the very best from your purchase.
Safety is important
Your safety and the safety of others is important. Please therefore, ensure you
read the Safety Instructions before you operate this unit.
Warranty
In the unlikely event that your product fails to work normally, please call the
below Bush warranty number for support.
Australia
Bush Warranty: 1800 509 394
New Zealand
Bush Warranty: 0800 450 259
3
About the Set Top Box
Thank you forchoosing this BushHigh Definition DigitalSet Top Box
with USB Record. As wellas receiving allstandard and highdefinition
digital free toair channels, youcan also recordyour favourite TV
programs via anexternal USB orHard Disk Drivedevice whilst
watching TV or pause andtime-shift live TV for aconvenient TV
experience.
An easyto use on-screeninstallation guide isprovided. In addition,
a fully featuredRemote Control isincluded that offers you access
to every featurewith a simplepress of abutton.
Main Features
Compliant withAustralian DVB-T Standards
Full MPEG2 ISO/IEC13818 TransportStream CompliantAudio/
Video Decoding
Bandwidth of 7/8MHzSupported
COFDM Demodulator
Automatic/Manual ChannelSearch
Channel Edit, Movingand Deletion
Parental Lock Control
EPG (Electronic ProgramGuide) and TeletextFunction (where
available)
HDMI Output
Multiple-Language OSD
Supports Multi-Subtitle
USB Input SupportsJPEG Files, MusicFiles, Video Files for
Recording and SoftwareUpgrade
Timeshift
Tuner RFIn/Loop Through
Component, Video output
Digital audio viacoaxial output
Full Function RemoteControl
Package Contents
Before installation, pleasecheck the itemsof the package.
The package should contain thefollowing items:
~ Set Top Box x1 pc
~ Remote Control x1 pc
~ AAABattery for theRemote Control x1pair
~ Instruction Manual
~ Composite RCACable
x1 pc
x1 pc
4
Table of Contents
Front and Rear Panel .......................................................................... 6
Remote Control...................................................................................7
Connections..................................................................................9
First Time Installation........................................................................12
Troubleshooting......................................................................22
Technical Specifications....................................................................23
Warranty............................................................................................24
5
Front and Rear Panel
1. Front panel
4
1 STANDBY INDICATOR: Shows you the power state of the set top box,
the LED will turn red if the set top box is in standby mode and Green if it
is on.
2 REMOTE CONTROL SENSOR: Used to receive the signal from the
remote control.
3 USB Input: Allows you to connect your USB device to record or play
files.
4 LED DISPLAY WINDOW: Used to displaycurrent channel number.
2. Rear panel
DFTA46R/A
POWER SUPPLY: AC 230V
MAX POWER CONSUMPTION:
~
50Hz
WATTS
6
BUSH WARRANTY: 1800 509 394 AUSTRALIA
BUSH WARRANTY: 0800 450 259 NEW ZEALAND
Serial No.:
AC 230V
~50Hz
MADE IN PRC
2011/10
N14119
1
2
RF IN:This socket connects to your external aerial.
RF LOOPTHROUGH: This socket willbypass the RFsignal to either
your TV or another videosystem.
3 COAXIAL: This socket connectsto a coaxialsocket on yoursurround
sound system.
4 HDMI OUT: This socket connectsto HDMI deviceto allow high
definition output.
5 VIDEO: This socket allows you toconnect your SetTop Box via
Composite Video Signal.
6 COMPONENT VIDEO OUT: These sockets connectto your TV
component input terminals.
7 AUDIO L/R: This socket allows you toconnect your SetTop Box to
receive theAudio L/R signal.
8 MAINS CABLE:This is usedto connect toyour main powersupply.
6
Remote Control
1. LIST: Press the List Button to display your recorded
programs list.
2. MUTE: Press the Mute Button to switch off the
Sound only.Press again to restore audio output.
3. INFO: Press the INFOButton to display the current
channel information.
4. TTX: Press the TTXto enter the TeletextMenu.
5. SUBTITLE: Press the Subtitle Button to select the
subtitle setting.
6. EXIT: Press the Exit button to exit the current Menu
or return to the previous Menu.
7. OK: Press the OKButton to confirm settings or menu
selections. Also press to display the channel list.
8. RIGHT/LEFT: Press the Navigate Buttons to move
through the Menu options or to increases or decreases
the volume.
9. TV/RADIO: Press the TV/RadioButton to switch
between from TVand Radio mode.
10. RECALL: Press the Recall Button to go back to the
previous channel you were watching.
11. GOTO:Press the GOTOButton to select the
multimedia option.
12. PREV: Press the Prev Button to skip to the
previous track in multimedia mode or timeshift in DTV
mode.
13. NEXT: Press the Next Button to skip to the Next track in multimedia mode or
timeshift in DTV mode.
14. REPEAT: Press the Repeat Button to repeat play in multimedia mode.
15. STOP: Press the Stop Button to stop play in Multimedia.
16. REC: Press the Rec Button to record the program you are watching.
17. STANDBY: Press the Standby Button to turn the unit to standby.
18. EPG: (Electronic Program Guide) Press the EPGButton to enter the EPG
menu.
19. AUDIO: Press the Audio Button to change the audio settings.
20. UP /DOWN: Press the Navigate Buttons to scroll through the Menu or to
scroll through the channel list.
21. MENU: Press the Menu Button to enter the Main Menu.
22. FAVOURITE: Press the Favourite Button to enter the Menu.
23. 0-9 (Numeric Buttons): Press the Numeric Buttons to enter a channel
directly or setting information.
24. FWD: Press the FWDButton to FastForward in Multimedia or timeshift mode.
25. REV: Press the Rev Button to Rewind in Multimedia or timeshift mode.
26. PLAY: Press the Play Button to begin or resume play in multimedia mode.
27. PAUSE:Press the Pause Button to pause play in multimedia mode or to
pause live TV.
28. COLOUR BUTTONS:Press the Colour Buttons to select different options in
the menu, EPG and Teletext modes.
7
Installing the Batteries
Remove the battery cover from the Remote Control and put 2xAAA size
batteries inside thecompartment.
The diagram inside the Battery Compartment shows the correct way to install
the batteries.
1.Open the cover
2.Install batteries
3.Closethe cover
Using the RemoteControl
To use the Remote Control, point it towards the front of the Digital Set Top
Box. The Remote Control has a range of up to 7 metres from the Set Top Box
at an angleof up to60 degrees.
The Remote Controlwill not operateif its pathis blocked.
Sunlight or verybright light willdecrease the sensitivityof the
Remote Control.
8
Connecting to a Television
Caution: Make sure to check the voltage specification of the wall outlet is
the same rating with the receiver. To prevent the risk of electric shock, do
not open the cover or the back of the receiver.
TV Aerial
AC 230V
~50Hz
YELLOW
(Video)
(Audio)
Composite
VIDEO IN
Cr
Cb
HDMI
Note: When connecting thereceiver to otherequipment, e.g., TV, VCR and
amplifier, makesure to referto relevant usermanual for instruction. Also, make
sure you disconnectall the equipmentsfrom the mainssupply before the
connection.
For a basicconnection from yourSet Top Box tothe television, usethe
Composite connection outlinedbelow. Fora higher qualityconnection, use the
Component Video connectionoutlined with theComposite Audio Connection.
For the highestquality connection usea direct HDMIconnection.
9
Connecting to a DVD Recorder or VCR
TV Aerial
AC 230V
~50Hz
10
Connecting to an Audio System
AC 230V
~50Hz
Coaxial cable
Coaxial
Amplifier
VOLUME
INPUT SELECTOR
POWER
BYPASS
PRO LOGIC
3
STEREO
MODE
TEST
CHANNEL
KARAOKE
MUTE
DOWN
UP
BASS
MIC
TREBLE
ECHO
1
MIC
2
1
MIC VOL
2
EXCITE
11
First Time Installation
After all connections have been made properly, switch on TV and make
sure the receiver is connected to the Main Power. Press thePower button
to switch receiver on. If youare using the receiver for the first time orhave
restored to Factory Default, the Installation Guide will appear on your TV
screen.
Installation Guide
OSD Language
Country
English
Australia
Channel Search
OK
EXIT
EXIT
Confirm
(1) Select [OSDLanguage] and Press the NavigateButtons to selectyour
desired language.
(2) Select [Country]and Press the NavigateButtons to selectyour desired
country.
(3) Select [ChannelSearch] and pressRIGHT or OK key tobegin
Automatic channel search
(4) Once channeltuning is complete, can begin watchingTV.
Basic Operation
(1) Program Manage Settings
To access the Menu, press the MENU button and select [Program]. The
Menu provides options to adjust the Program Manage Settings. Select an
option and press OK or RIGHTto adjust that setting. Press the EXIT button
to exit the Menu.
12
(2) Program Edit
To edit your program preferences (lock, skip, favourite, move or delete), you
will need to enter the Program Edit Menu. ThisMenu requires a password to
access. Enter the default password '000000'.
Programme Edit
ALL TV
001 TV3
SKIP
002 33
003 3/24
004 K3/300
Searching...
Move
Skip
Lock
Delete
FAV FAV
, or pressLeft/right
button to selectyour favourite type.
To cancel the skip, pres the GREEN button again and the skip
symbol will betaken off.
13
Move a TV or Radio Program/s
1. Select the preferred program then press the RED button. A move symbol
will appear
2. Press UP/DOWN to move the program
3. Press OK to confirm
4. Repeat the above steps to move more channels
Lock Program/s
You can lock selected programs for restricted view.
Lock a TV or Radio Program:
1.Select the preferred program then press the YELLOW button. Alock-shaped
symbol is displayed. The program is now marked as locked
2. Repeat the previous step to select more programs
3. To confirm and exit the menu, press the EXITbutton
4. Press the YELLOW button to disable the locked program
5. To view the locked program, you will be require to enter either the default
password '000000' or your last set password.
(3) EPG (Electronic program guide)
The EPG is an on-screen TV guide that shows scheduled programs seven
days in advance for every tuned channel.
1. Press the[EPG] button.
2. Press [up]or [down] tomove through theprogrammes.
3. To move throughthe list ofchannels press [left]and [right].
4. To move forwardsone day,press [RED]. To move backwards, press [GREEN]
5. To set abook list, press[INFO] then press[RED], follow theon screen
instructions to scrollthe programme youwant to setas a reminderto watch.
When the programmeis about tostart a reminderwindow will beshown.
6. Press [OK]to enter schedulebook, like scheduleview and schedule
recording.
14
(4) Sort
Sort your channelsfrom the followingoptions:
[LCN] - Sortthe channels in ascending order
[Name] - Sortthe channels inalphabetical order
[Service ID] -Sort the channels according to thestation
(5) LCN (Logicalchannel number)
Set LCN onor off.
(6) Video Setting
To access the Menu, press MENU thenselect [Picture]. The Menu
provides options to adjust the videosettings. Press UP/DOWNto select an
option and pressRIGHT/LEFT to adjust that setting. Press EXIT to exit the
menu.
(1). Aspect Ratio
You must set the display format to either 4:3 PanScan, 4:3 Letter Box,16:9
Full Screen or 4:3 Full, 16:9 Pillar Box, 16:9 PanScan Auto to get the
maximum display when watching TV.
(2). Resolution
If the videodoes not appear correctly, change the setting. This setting is to
match the mostcommon setting forHDMI.
[480i]: for NTSCsystem TV.
[480P]: for NTSCsystem TV.
[576i] for PAL system TV.
[576P]: for PAL system TV.
[720P]: for NTSCor PAL system TV.
[1080I]: for NTSCor PAL system TV.
[1080P]: for NTSCor PAL system TV.
(3). TV format
If the videodoes not appear correctly, you need to change the settings.
This should matchthe most commonsetting for TVs in yourcountry.
[NTSC]: for NTSCsystem TV.
[PAL]: for PAL system TV.
(7) Channel Search
To access the menu,press MENU and select [Search Channel]. The Menu
provides options toadjust the Search Channel settings.
Select an optionand press RIGHT/LEFTto adjust thesettings.
Press EXIT to exit the Menu
15
1 . Auto Search
Search and installall channels automatically. This option overwrites all
preset channels.
1. Select [AutoSearch] and pressOK or RIGHTto start channelsearch.
2. To cancel channelsearch, press EXIT.
Channel Search
498.0MHz/8MHz
DTV:004
Radio: 003
001 RNE1
002 RNEC
003 RNE3
001 TVE1
002 La 2
003 24H TVE
004 CLAN TVE
Progress
MENU
EXIT
EXIT
Skip
2. Manual Search
Install new channelsmanually. This option adds new channelswithout
changing the currentchannels list.
1. Select [ManualSearch] then press OK or RIGHT. The channel search
screen will appear.
2. Press the RIGHT/LEFT key to select the channel frequency
Manual Search
Frequency channel
Frequency(MHz)
Bandwidth:
10
212.5
7M
Quality
OK
EXIT
EXIT
Confirm
3. Press OKto start searchingchannels
If a channelis found, itis saved andadded to thechannels list. Ifchannels
can’t be found, then exit themenu.
(3) Country
Select your countryof residence.
(4) Antenna power
Enable Antenna Power if anexternal active antennais connected.
16
(8) Time Setting
To access the Menu, press MENU then select [Time]. The Menu provides
options to adjustthe time settings.
Press UP/DOWN to select an optionand press RIGHT/LEFTto adjust the
settings. Press EXIT to exit themenu.
(1) Timeoffset
Select auto ormanual for GMToffset adjustments.
(2) Country Region
Select the CountryRegion when [Time Offset] is set toAuto.
(3) TimeZone
Select the Time Zone Offset when [Time Offset]is set toManual.
Auto Standby
Auto Standby (inactivitysetting) is usedto put theSet Top Box intostandby
if a buttonhasn't been pressedfor 3 hours. The default setting of theSet Top
Box is Off.
(9) Option
To access the Menu, press MENU and select [Option]. The menu provides
options to adjustthe OSD Language, SubtitleLanguage and Audio
Language. Select an optionand press RIGHT/LEFT to adjust thesetting.
Press EXIT to exit the Menu
(1). OSDLanguage
Select an OSDlanguage
(2). SubtitleLanguage
Select the preferredsubtitle language.
(3). AudioLanguage
Select the preferredaudio language forwatching TV channels.
If the languageis not available, the default programlanguage will beused.
17
(10) System Setting
To access the Menu, press MENU and select [System]. The menu
provides options toadjust the systemsettings.
Press the UP/DOWN key to select an optionand press RIGHT/LEFTto
adjust the setting.
Press EXIT to exit theMenu .
(1) Parental Guidance
You can restrict access to channels that are unsuitable
for children. To restrict/lock the channel you will need to enter either the
default password '000000' or your own password.
(2) Set Password
Set or change the password for locked programs. Enter your old password
or the default password '000000'. You will then be asked to enter your new
password. To confirm re-enter your new password. Once it is confirmed,
press EXIT to exit the Menu.
Set Parental guidance
Press Menu button to access menu and Select System, choose parental
guidance, input your password and set the level. Then icon of the PG level
will be shown in the info bar of the program.
(3) Restore Factory Default
Reset your Set Top Box to the Default Factory Settings.
In Main Menu select [Restore Factory Default] and press OK or RIGHTto
select. Enter your password or the default password '000000' and press OK
to confirm. This option will delete all preset channels and settings.
18
(4) Information
View model, hardware and softwareinformation.
(5) Software Update
1.OAD
When this optionis set to"On", the SetTop Box willbegin to searchfor new
software automatically, from overair broadcasts basedon your settime in
"Start Time".
2. USB upgrade
New software updatedvia the USBport.
(11)USB
To access the Menu, press the MENU button and select[USB]. The menu
provides options toplayback Music andPhoto files, itcan support
MP3,WMA,JPEG,BMP files, The unit will only supportUSB device with
FAT and FAT32 file system. It will notsupport NTFS filesystem.
(1) Multimedia: Once yourUSB is pluggedin, you canselect the Musicor
Photo type inthe multimedia menu. Press OK toenter the filebrowser and
select the fileyou wish toplay.
Please note: Ifno USB deviceis plugged in, a warning message"No USB
Device is Found"will be displayed.
19
(2) Photo configure:
You can select onof the followingsettings to foryour photo slideshow
options.
-Slide Time: You can adjust slideshow interval from1~8 seconds.
-Slide Mode: You can adjustslide show effect as mode0~59 or random.
-Aspect Ratio: You can displaysthe picture asits original aspect.
- Discard displays the picturein full screenmode.
- Subtitle Specific:
[Small]: Displays thesubtitle as smallmode.
[Normal]: Displays thesubtitle as normalmode.
[Big]: Displays thesubtitle as bigmode.
- Subtitle BG:
[White]: Displays thesubtitle in whitebackground.
[Transparent]: Displays the subtitle intransparent background.
[Grey]: Displays thesubtitle in grey background.
[Yellowgreen]: Displays the subtitlein yellowgreen background.
- Subtitle FontColor:
[Red]: Displays Subtitlein red font.
[Blue]: Displays Subtitlein blue font.
[Green]: Displays Subtitlein green font.
USB Recording:
The most uniquefeature on yourSet Top Box isits ability torecord live TV.
You can simply connecta USB storagedevice or HardDisk Drive to your Set
TopBox and pressthe record buttonon the remotecontrol.
We recommend that you usea powered harddisk drive, asUSB sticks only
allow limited functionality. If youdecide to usea USB stickplease ensure it
has over 2GBof recordable space.
With the RecordFunction you canrecord Live TV at anytime. Follow the
below steps toactivate this function.
1. Press theRecord Button toactivate Record function.
2. The recorded program canbe played in2X speed bypressing fast
forward/ rewind Buttonfor first time, in 4X speedfor second time, in 8X
speed for thirdtime, in 16Xspeed for fourthtime, in 32Xspeed for fifthtime.
3. You can displayinformation of therecorded program willbe displayed by
pressing the 'INFO'Button while infull-screen playback.
4. To exit therecorded program pressthe stop button.
Note:
- We cannot guarantee compatibility(operation and/or buspower) with all
USB mass storagedevices and assumesno responsibility forany loss of
data that mayoccur when connectedto this unit.
- With large amounts ofdata, it maytake longer forthe system toread the
contents of aUSB device.
- Some USB devices maynot be properlyrecognized.
- Even when they arein a supportedformat, some filesmay not playor
display depending onthe content.
20
Time shift
Make sure that a USB or Hard Disc Drive device is connected to the
receiver in order to be able to use the time shift function.
We recommend that you use a powered Hard Disk Drive as USB Sticks will
only allow limited functionality.
Please ensure that the USB Memoryused has a memory capacity ofabove
2 GB.
With the Timeshift Function you can pause and continue Live TV at anytime
you like without having to miss any action. Follow the below steps to
activate this function.
1. Press thePause Button toactivate Timeshift and pause Live TV. You can
press play at anytime to resume play.
2. You can fast forward the playback at anytime until returning to live TV, or
press the stop button to exittimeshift mode.
21
Troubleshooting
Problem
Potential Reasons
Power isn't connected
What to do
Connect the power
No picture
The power switchis not on Switch on thepower
Screen shows
No Signal
Plug in theDVB-T cable
Conduct a factoryreset
DVB-T cable notconnected
Incorrect setting
No sound from
speaker
No or incorrectconnection Connect the audiocable
with audio cable
correctly
Sound on mute
Turn offmute function
Volume isset to low
Adjust the volume.
Only sound, no
image on the
screen
No or incorrectconnection Make sure cablesare
with AV cable
connected correctly
The program isa radio
program
Press <TV/RADIO> keyto
shift into TV mode
Remote Control
is not responding
The battery isexhausted Change battery
Remote Control isnot
facing or closeenough
to the SetTop Box
Adjust the positionof the
Remote Control andmove
closer to theunit
The image stopped The signal istoo weak
suddenly or mosaic
Conduct a FactoryReset
USB is notconnected
properly or doesnot
sufficient memory
Reconnect the USBor
connect another USB
USB not responding
22
Technical Specifications
Item
Sub Item
Parameter
Input Frequency 170~230MHz
470~860MHz
Tuner
-25~-78dBm
RF Input level
IF Bandwidth
7MHz and 8MHz
QPSK,16QAM,64QAM
Modulation
Decoder Format MPEG4 AVC/H.264 HP@L4
MPEG2 [email protected]
Video
576P,720P,1080i,1080P,4:3 and 16:9
Output Format
Output Port
HDMI, CVBS
Decoder Format
Audio output
Audio
Power
MPEG-1 (layer1&2)
Digital audio: S/PDIF
230V~ 50Hz
Max 6W
Voltage
Power
23
Warranty
Please keep yourreceipt as proofof purchase. This product iswarranted
for any defectin materials orworkmanship for oneyear after theoriginal
date of purchase. This product is for normaldomestic and office use only.
This warranty doesnot cover damagefrom misuse orneglect, accidental
damage, vermin infestation, excessive voltages suchas lightning orpower
surges or anyalteration that affects the performanceor reliability ofthe
product.
Our goods comewith guarantees thatcannot be excludedunder the
Australian Consumer Law. You are entitledto a replacementor refund fora
major failure andfor compensation forany other reasonablyforeseeable
loss or damage. You are also entitledto have thegoods repaired or
replaced if thegoods fail tobe of acceptablequality and thefailure does not
amount to amajor failure.
In the unlikelyevent that yourproduct fails towork normally, please contact
the Bush Warranty on 1800 509 394(Australia) or 0800 450 259(New
Zealand) and have yourreceipt of purchaseon hand.
This warranty is subject tothe following provisions:
It is onlyvalid within theboundaries of thecountry of purchase.
The product mustbe correctly assembledand operated inaccordance
with the instructionscontained in thismanual.
The product mustbe used solelyfor domestic purposes.
The warranty doesnot cover accidentaldamage, misuse, cabinetparts
or consumable items.
The warranty willrendered invalid ifthe product isresold or hasbeen
damaged by inexpertrepair.
The manufacturer disclaimsany liability forincidental or consequential
damages.
This warranty is in additionto, and doesnot diminish,
Your statutory or legalrights.
PO BOX 6287,
SILVERWATER NSW 1811
Bush Warranty: 1800 509394 Australia
Bush Warranty: 0800 450259 New Zealand
24
|