Bosch Appliances UC MCM 5100 User Manual

Owner’s Manual  
Food Processor Plus  
models:  
MCM 5000 UC • MCM 5100 UC  
MCM 5200 UC  
READ THIS MANUAL  
thoroughly for important safety and operating  
instructions before using this appliance.  
TABLE OF CONTENTS  
IMPORTANT SAFEGUARDS .................................................................. 2  
Table of contents..................................................................................... 3  
ABOUT YOUR FOOD PROCESSOR ...................................................... 4  
Bosch Food Processor ........................................................................... 4  
Unpacking............................................................................................... 4  
Electrical specifications ............................................................................ 4  
Before using for the first time .................................................................. 4  
Getting to know your Food Processor ...................................................... 6  
Power unit features .............................................................................. 6-7  
Special features of mixing bowl ............................................................... 7  
Getting started ................................................................................... 8-10  
STANDARDATTACHMENTS ................................................................ 10  
Mixing bowl w/multifunction blade, whisk, hooks and discs................... 10  
How to use multifunction blade .............................................. 10-11  
Placing into operation with multifunction blade .............................. 11  
How to use dough hook ................................................................ 12  
How to use whipping whisk.................................................... 12-13  
How to use slicing and grating discs ........................................... 14  
Care and cleaning of bowl and its accessories ........................... 16  
Blender with unbreakable plastic jar ........................................................ 16  
How to use blender...................................................................... 17  
Placing blender into operation...................................................... 18  
Example of use of blender ........................................................... 18  
Care and cleaning of blender........................................................ 19  
Citrus Juicer........................................................................................... 19  
Placing into operation with citrus juicer........................................ 20  
Care and cleaning of mixing bowl with citrus juicer ...................... 20  
Juice Extractor....................................................................................... 20  
Placing into operation with juice extractor .................................... 21  
Care and cleaning of mixing bowl with juice extractor .................. 21  
SERVICE and REPAIR .......................................................................... 22  
TROUBLESHOOTING ................................................................. 23  
SAMPLE RECIPES .......................................................................... 24-25  
Important Notes ..................................................................................... 26  
BOSCH small appliance warranty ........................................................... 27  
HOUSEHOLD USE ONLY  
3
three-quart capacity mixing bowl, cover  
with integral feeding tube and pusher/  
measuring cup, multifunction blade,  
whipping whisk, dough hook, reversible  
slicing disc, reversible coarse grating  
disc, fine grating disc, 6-cup capacity  
blender, citrus juicer, juice extractor  
motor drive cover and spatula.  
ABOUT YOUR FOOD PROCESSOR  
Congratulations on having selected one of  
the Bosch Food Processors. A series of  
food processors designed to simplify  
common food preparation tasks of the home  
cook: stirring, beating, slicing, mincing,  
grating and chopping as well as juicing.  
As you read through these instructions,  
please pay particular attention to the  
IMPORTANT SAFEGUARDS. Specific  
safeguards for the attachments, as well as  
warnings and cautions, are provided in each  
Unpacking  
Carefully remove the power unit from its  
packaging and place it on the counter so it  
is ready to use. As you remove the  
accessories from the carton, check them  
against figure 1 to assure that all the  
standard parts are present.  
section describing the operation of that  
particular attachment.  
Bosch Food Processor  
The Bosch Food Processor Plus is available  
in 3 models:  
Electrical Specifications  
Check to make sure that the voltage on  
which your food processor is to operate is  
the same as specified on the rating plate.  
Standard North American models have an  
electrical power rating of 530-watt maximum  
power rating with the attachment that draws  
the most power (some attachments may  
draw less power).  
The MCM 5000 UC  
comprised of a two-speed electronic  
power unit with integral cord storage,  
three-quart capacity mixing bowl, cover  
with integral feeding tube and pusher/  
measuring cup, multifunction blade,  
beater, dough hook, reversible slicing  
disc, reversible coarse grating disc,  
citrus juicer, motor drive cover and  
spatula.  
Before Using for the First Time  
Before using any of the attachments for the  
first time it is recommended they be washed,  
rinsed well and dried. Of the attachments  
supplied with the systems in this manual,  
all parts, except the blender’s jar/blade  
assembly, are dishwasher safe:  
The MCM 5100 UC  
comprised of two-speed electronic power  
unit with integral cord storage, three-  
quart capacity mixing bowl, cover with  
integral feeding tube and pusher/  
measuring cup, multifunction blade,  
beater, dough hook, reversible slicing  
disc, reversible coarse grating disc, 6-  
cup capacity blender, citrus juicer, motor  
drive cover and spatula.  
> The blender’s jar/blade assembly  
should be washed under running water  
and dried.  
Note: It is recommended that the  
blender jar/blade assembly  
never be left to stand in water or  
soap solution, to prevent the bearing  
lubricant from being washed out.  
The MCM 5200 UC  
comprised of a four-speed electronic  
power unit with automatic cord rewind,  
4
MCM 5000 UC  
MCM 5100 UC  
MCM 5200 UC  
Figure 1  
5
Power Unit Features  
Getting to Know Your Food Processor  
The MCM 5000 power units have the  
following features, refer to figure 2:  
The Bosch Food Processors are comprised  
of various attachments, depending on the  
system purchased (see above).  
530-watt motor  
One of the most powerful motors offered  
with any food processor system.  
Bosch engineers are continually working on  
expanding the usefulness of your Bosch  
Food Processor. If there is some type of  
accessory in which you are interested, that  
is not presently available for your Bosch  
Food Processor, please either write us at:  
Electronic speed control  
Six-position rotary switch, on the MCM  
5200, see figure 2a; four-position rotary  
switch, on the MCM 5100 and MCM 5000,  
figure 2b, is located at the front of the power  
unit. The MCM 5200 has 4 speeds plus a  
momentary pulse function and a stop  
position “O/Off,” while the MCM 5200 and  
MCM 5000 have 2 speeds plus a momentary  
pulse function and a stop position “O/Off,”  
see figure 2a.  
Bosch Small Appliances  
Customer Support  
BSH Home Appliances  
5551 McFadden Avenue  
Huntington Beach, CA 92649  
or call us at:  
1 (866) 44BOSCH  
[1 (866) 442-6724]  
Figure 2.  
6
Built-in Safety Cutout  
• A dual drive, figure 2f, used by bowl  
accessories: one high-torque drive used  
to drive dough hook, citrus juicer and  
other special accessories requiring high  
torque; and, a high speed drive used to  
drive the multifunction blade, beater,  
whipping whisk and other accessories  
requiring higher speeds.  
The Bosch Food Processors are provided  
with a built-in safety cutout to protect the  
motor against overheating.  
If the safety cutout should open:  
a. Turn the processor to the off position  
“O/Off” and unplug.  
b. Contact Bosch Small Appliances  
Customer Support, see page 6, for  
closest Bosch authorized service  
center.  
c. Take, or ship, the food processor to  
a Bosch authorized service center to  
have the safety cutout replaced.  
Convenient cord storage  
The MCM 5200 UC model stores the cord  
internally, on an automatic cord winder, see  
figure 2g.  
Four rubber feet  
Four rubber feet provide the ultimate in  
stability, while also serving to isolate the  
power unit from the hard surface to minimize  
noise and vibration, figure 2h.  
Safety Cover Interlock  
The Bosch Food Processor incorporate in  
their design a special safety feature; the  
Safety Cover Interlock, figure 2c. This  
feature prevents the rotary switch from  
being turned from the Off position, “O/Off,”  
if cover has not been placed on the bowl  
properly and rotated to trip the Safety Cover  
Interlock.  
Special features of mixing bowl  
The mixing bowl has a number of special  
features:  
Dual feeding tube  
The three-quart capacity mixing bowl comes  
with two feeding tubes molded into the cover.  
The small tube may be used for slicing or  
grating items that you wish to stand on end.  
Safety Motor Drive Cover  
Another special safety feature incorporated  
in the Bosch Food Processors is the Safety  
Motor Drive Cover, figure 2d. The Safety  
Motor Drive Cover must be in place on the  
high speed blender drive when not in use  
or the motor will not start when turned to  
one of its On positions, or if removed while  
power unit is running will bring the power  
unit to a stop.  
Pusher/measuring cup  
In addition to its ability to act as both a  
pusher and a measuring cup, the slimmer  
portion of the pusher has a hole at the  
bottom to allow it top be used as a funnel  
when liquids need to be added to the  
mixture in the bowl. See figure 3a.  
Dual drives  
The Bosch Food Processors come with  
three drives:  
Filling tray  
• A high-speed drive directly coupled to  
the motor, used to drive the blender and  
other special accessories, located  
under the Safety Motor Drive Cover,  
figure 2e.  
The MCM 5200 UC, Bosch Food  
Processor, also comes with a filling tray  
that can be mounted on the feeding funnel  
to simplify the feeding of material into the  
bowl, figure 3b.  
7
high speed blender drive and pressed  
down until it snaps in place.  
If high speed blender drive is to be  
used, remove the safety motor drive  
cover from the high speed blender  
drive and place mixing bowl over dual  
drive and turn clockwise to lock into  
position as shown in figure 4a. Next  
place the mixing bowl cover, with  
pusher/measuring cup in the feeding  
tube, on the bowl. Make sure arrows  
on cover and bowl are aligned, so that  
tabs on bowl fit into channels in cover  
and then turn cover clockwise until tab  
on cover enters cover interlock and  
turn until tab clicks into place, figure  
4b.  
Figure 3.  
Getting Started  
The operation of your Bosch Food  
Processor is summarized below.  
Specific instructions for using each of the  
attachments, provided with the food  
processor systems covered by this manual,  
follow the summarized instructions. Please  
read the specific instructions thoroughly  
before using that attachment, paying  
particular attention to the IMPORTANT  
SAFEGUARDS and WARNINGS provided.  
1. Place power unit on suitable work  
surface.  
Before using the food processor with  
any of the attachments, the power unit  
should be placed on a suitable work  
surface. The surface should be sturdy,  
smooth and clean; make sure that  
there is no flour or oil on the surface.  
A clean, smooth surface will provide  
the best footing for the suction cup feet  
on the power unit and will limit slipping  
and/or “walking,” see figure 2h.  
Figure 4.  
5. Place selected attachment.  
Place the selected attachment on  
power unit. See specific instructions  
for attachment selected. Specific  
instructions are located on pages  
listed below:  
2. Plug power unit into power supply.  
Pull the power unit’s cord out to  
appropriate length and plug it into a  
convenient nearby outlet.  
Attachment  
Pages  
Bowl w/multifunction blade ..... 10–12  
with dough hook .......................... 12  
with whipping whisk/beater ..... 13-14  
with slicing and grating disc .... 14-16  
Blender ..................................... 16–18  
Citrus juicer .............................. 19-20  
Juice extractor........................... 20–21  
3. Select attachment to be used.  
Select the attachment you wish to use.  
4. Cover the drive not being used.  
If dual drive is to be used for selected  
attachment, make sure that safety  
motor drive cover is placed over the  
Table 1.  
8
6. Operate unit with rotary switch.  
Once the attachment is in place, the  
speed of its moving components can  
be controlled through the use of the  
rotary switch at the front of the power  
unit. See figure 2. The rotary switch  
has six or four positions, depending  
on the model you have:  
9. Continue use.  
If the attachment was of the batch-feed  
type and you wish to continue using  
the attachment, empty the bowl or jar  
of the attachment per its specific  
instructions and reinstall the  
attachment as before. Repeat steps  
5 through 8 as often as necessary to  
complete work.  
All MCM models have the following:  
a. “M,” a momentary “pulse” position  
that provides full speed and power  
for the time it is held in position.  
10. Work completed,  
remove attachment.  
If the attachment is of the continuous  
feed type or is the batch type and you  
have completed the work you wished  
to perform with the attachment,  
remove the attachment from the power  
unit per the instructions for the specific  
attachment being used.  
b. “O/Off,” the off position.  
TheMCM5000and5100have2speeds  
c. Two speeds labeled 1 and 2.  
Speed 1 is the lowest speed.  
The MCM 5200 has 4 speeds:  
d. Four speeds labeled 1, 2, 3 and 4.  
Speed 1 is the lowest speed. The  
speed increases with each  
succeeding step up to the highest  
speed, speed 4.  
11. Place contents (batch-feed type).  
If the attachment is the batch feed  
type, disassemble per the specific  
attachment’s instructions and place  
the contents in a suitable container.  
12. Care and cleaning.  
All models of the Bosch Food  
Processor incorporate a built-in safety  
cutout switch to protect the motor  
against overheating. If the safety  
becomes activated, the power unit will  
stop. If power unit should stop even  
though there is power to the unit see  
TROUBLESHOOTING at the back of  
this manual .  
Once you have completed working  
with the Bosch Food Processor, the  
next step is to disassemble and clean  
the attachments. If you wish to use  
another attachment, please return to  
step 3, above.  
Power unit  
With the power unit turned Off and  
unplugged, it should be cleaned only with  
a clean, damp cloth. Then wipe off the safety  
motor drive cover and reinstall on the power  
unit, if necessary. Never use coarse or  
caustic cleaning products to clean the  
power unit. Never immerse the power unit  
in water.  
7. Turn power unit off.  
When your work with the attachment  
is completed or the capacity of the  
batch-feed attachment has been  
reached, turn the power unit to the Off  
position, “O/Off,” and unplug.  
8. Remove the attachment.  
The power unit may be left on the counter  
or stored for future use. If the unit will be  
stored, store the cord and lift the power unit  
and place in your chosen storage area.  
Remove the attachment from the  
power unit, per instructions for the  
specific attachment being used.  
9
Attachments  
6. Always grasp multifunction blade by  
top of center column. Do not grip by  
the blades.  
The attachment(s) that have been used  
should be disassembled and washed, dried  
and stored for future use.  
The Bosch Food Processors are provided  
with a three-quart mixing bowl and  
multifunction blade, beater or whipping  
whisk, dough hook, reversible slicing disc,  
reversible coarse grating disc and fine  
grating disc (MCM 5200 UC only) as shown  
in figure 5.  
It is recommended that, after cleaning, the  
mixing bowl and its cover be stored on the  
food processor. In this way, if you wish at  
some later time to use the blender, the  
mixing bowl and its cover will already be in  
place.  
STANDARDATTACHMENTS  
How to Use Multifunction Blade  
Following are the specific instructions for  
the standard attachments provided with the  
Bosch Food Processors, covered by this  
manual.  
All the MCM models comes with the mixing  
bowl, cover and pusher/measuring cup and  
multifunction blade. The multifunction blade  
is intended to be used for mincing, pureeing  
and pulverizing of fruits, vegetables, nuts  
and dried bread (preparation of bread  
crumbs) and the preparation of sauces,  
special diet foods, infant foods and mixing.  
The multifunction blade should not be used  
to process hard cheeses (Parmesan,  
Romano, etc.  
Mixing Bowl with multifunction blade,  
beater or whipping whisk, dough hook,  
reversible slicing disc, reversible  
grating disc and, MCM 5200 UC only,  
fine grating disc  
WARNING  
Use of mixing bowl with multifunction blade  
Before beginning to attach this or any other  
attachment, make sure that the power unit  
is on a smooth, clean, suitable work  
surface and switched to the Off position,  
“O/Off,” and that you have the safety motor  
drive cover in place of the high speed,  
blender drive.  
1. There is a risk of injury from rotating  
tools when using the mixing bowl with  
the multifunction blade, dough hook,  
whipping whisk, beater or with discs.  
2. Avoid contact with moving parts. Keep  
hands, hair and clothing, as well as  
spatulas, bowl scrapers and other  
utensils away from blades, hooks,  
whisk, beater and discs during  
operation to prevent injury and/or  
damage to the power unit or  
accessories.  
1. Before using the mixing bowl and  
multifunction blade for the first time they  
should be washed. See Before Using  
for the First Time, on page 4.  
3. Always work with the bowl lid cover  
fitted in place.  
2. Make sure the safety motor drive cover  
has been snapped into place on the  
high-speed blender drive. Place the  
mixing bowl on the dual drive of the  
power unit, as shown in figure 4a, and  
turn the bowl clockwise with a slight  
downward pressure until bowl is firmly  
seated.  
4. Do not change tools until the power unit  
has come to a complete stop; when  
switched Off, the power unit will  
continue to turn for a brief period.  
5. Always place protective cover on  
multifunction blade when it is not in  
use.  
10  
4. Next place the mixing bowl cover on  
the bowl. Make sure arrows on cover  
and bowl are aligned, so that tabs on  
bowl fit into channels in cover and then  
turn cover clockwise until tab on cover  
enters cover interlock and turn until tab  
clicks into place, figure 6b.  
Figure 5.  
Figure 6.  
5a. Cover w/dual feeding tubes  
5b. Cover w/integral feeding tube  
5c. Pusher/measuring cup  
5d. Multifunction blade w/protective cover  
5e. Dough hook  
The cover should be in place whenever  
the power unit is in operation. The cover  
serves to prevent accidental contact  
with the moving blade. Also, the power  
unit will not operate unless the tab on  
the cover is in place and has engaged  
the safety cover interlock.  
5f. Whipping whisk  
5g. Fine grating disc  
Placing into Operation w/Multifunction  
Blade  
5h. Reversible slicing disc  
5i. Reversible coarse grating disc  
5j. Dough hook  
Make sure that the power unit is on a  
smooth, clean, suitable work surface and  
switched to the Off position, “O/Off.” Pull  
the electrical cord out to the necessary  
length and plug into a convenient outlet.  
The mixing bowl with multifunction blade is  
now ready for operation. The multifunction  
blade should only be used using the  
momentary contact position ”M” to prevent  
over processing of food.  
5k. Whipping whisk  
3. Engage the multifunction blade on the  
dual drive of the power unit by placing  
it over the center column, as shown in  
figure 6a. Once in place, check to make  
sure the multifunction blade has  
engaged the dual drive by turning the  
multifunction blade while pushing down  
until it stops.  
Sample recipes may be found in the recipe  
section, at the back of this manual.  
11  
How to Use Dough Hook  
bowl fit into channels in cover and then  
turn cover clockwise until tab on cover  
enters cover interlock and turn until tab  
clicks into place,  
All the MCM models come with the mixing  
bowl, cover and pusher/measuring cup. The  
MCM 5200 comes with a dough hook, as  
shown in figure 5e, while the MCM 5100 and  
5200 comes with the dough hook as shown  
in figure 5j. Both of these dough hooks are  
intended to be used to knead yeast doughs  
and to mix cookie and pastry doughs, and  
also when adding nuts, chocolate chips,  
dried fruit, hard butter or shortening,  
hardened brown sugar, etc. to batters.  
The cover should be in place whenever  
the power unit is in operation. The cover  
serves to prevent the escape of flour  
dust at the beginning of the stirring and  
kneading process, and also serves to  
prevent accidental contact with the  
moving dough hook. Also, the  
power unit will not operate unless the  
tab on the cover is in place and has  
engaged the safety cover interlock.  
Use of mixing bowl with dough hook  
Before beginning to attach this or any other  
attachment, make sure that the power unit  
is on a smooth, clean, suitable work surface  
and switched to the Off position, “O/Off,”  
and that you have the safety motor drive  
cover in place of the high speed, blender  
drive.  
Placing into Operation with Dough  
Hook  
Make sure that the power unit is on a  
smooth, clean, suitable work surface and  
switched to the Off position, “O/Off.” Pull  
the electrical cord out to the necessary  
length and plug into a convenient outlet.  
The mixing bowl with dough hook is now  
ready for operation. Sample recipes may  
be found in the recipe section, at the back  
of this manual.  
1. Before using the mixing bowl and dough  
hook for the first time they should be  
washed. See Before Using for the  
First Time, on page 4.  
2. Make sure the safety motor drive cover  
has been snapped into place on the  
high-speed blender drive. Place the  
mixing bowl on the dual drive of the  
power unit, as shown in figure 4a, and  
turn the bowl clockwise with a slight  
downward pressure until bowl is firmly  
seated.  
How to Use Whipping Whisk  
All the MCM models comes with the mixing  
bowl, cover and pusher/measuring cup. The  
MCM 5200 comes with a whipping whisk,  
as shown in figure 5f, while the MCM 5100  
and 5200 comes with a whipping whisk as  
shown in figure 5k. Both of these whipping  
whisks are intended to be used for very light  
substances, such as cream, egg whites,  
sauces, batters and light pastry doughs  
that are thin enough to pour.  
3. Engage the dough hook on the dual drive  
of the power unit by placing it over the  
center column, as was done with  
multifunction blade, in figure 5a. Once  
in place, check to make sure dough  
hook has engaged the dual drive by  
turning the dough hook counterclockwise  
while pushing down until it stops.  
The dough hook should be used for all  
heavier substances such as cookie doughs,  
yeast doughs, pastry doughs and other  
heavy doughs. The dough hook should  
always be used when adding nuts,  
chocolate chips, dried fruits, hard butter or  
other fats, hardened brown sugar, etc. to a  
mixture.  
4. Next place the mixing bowl cover on  
the bowl. Make sure arrows on cover  
and bowl are aligned, so that tabs on  
12  
Use of mixing bowl with whipping whisk  
Before beginning to attach this or any other  
attachment, make sure that the power unit  
is on a smooth, clean, suitable work  
surface and switched to the Off position,  
“O/Off,” and that you have the safety motor  
drive cover in place of the high speed,  
blender drive.  
the whipping whisk has engaged the  
dual drive by turning the whipping whisk  
counterclockwise while pushing down  
until it stops.  
1. Before using the mixing bowl and  
whipping whisk for the first time they  
should be washed. See Before Using  
for the First Time, on page 4.  
Figure 7.  
Figure 8.  
The whipping whisk, supplied with the  
MCM 5200 UC, may be removed from  
its holder as shown in figure 7, and  
washed in the dishwasher along with  
the mixing bowl and other components.  
After washing, rinse well and dry the  
whisk and whisk holder before  
reattaching the whisk.  
4. Next place the mixing bowl cover on  
the bowl. Make sure arrows on cover  
and bowl are aligned, so that tabs on  
bowl fit into channels in cover and then  
turn cover clockwise until tab on cover  
enters cover interlock and turn until tab  
clicks into place,  
2. Make sure the safety motor drive cover  
has been snapped into place on the  
high-speed blender drive. Place the  
mixing bowl on the dual drive of the  
power unit, as shown in figure 4a, and  
turn the bowl clockwise with a slight  
downward pressure until bowl is firmly  
seated.  
3. Engage the whipping whisk on the dual  
drive of the power unit by placing it over  
the center column, as shown in figure  
8. Once in place, check to make sure  
The cover should be in place whenever  
the power unit is in operation. The cover  
serves to prevent the escape of flour  
dust at the beginning of the stirring  
process, and also serves to prevent  
accidental contact with the moving  
whipping whisk. Also, the power unit  
will not operate unless the tab on the  
cover is in place and has engaged the  
safety cover interlock.  
13  
Placing into Operation with Whipping  
Whisk  
WARNING  
Make sure that the power unit is on a  
smooth, clean, suitable work surface and  
switched to the Off position, “O/Off.” Pull  
the electrical cord out to the necessary  
length and plug into a convenient outlet.  
The mixing bowl with whipping whisk is now  
ready for operation. Sample recipes may  
be found in the recipe section, at the back  
of this manual.  
1. Blades on discs are sharp. Handle  
carefully. Always use the center plastic  
holder to lift or handle discs. Do not  
grip the discs by the blades or metal  
surfaces.  
2. When operating using the slicing or  
grating discs keep hands clear of  
filling tube. Only work with pusher.  
3. Always operate the power unit with  
the cover in place.  
Mixing bowl tips:  
1. When using the mixing bowl to knead  
or mix a recipe designed to be  
prepared by hand, you will find that with  
the Bosch Food Processor you can  
usually place all the ingredients in the  
mixing bowl at once. When doing this,  
always place the liquids in first. This  
will assure more thorough mixing.  
2. When adding ingredients to a mixture:  
a. Turn the rotary switch to a lower  
speed  
Use of mixing bowl with slicing or grating  
discs  
Before beginning to attach this or any other  
attachment, make sure that the power unit  
is on a smooth, clean, suitable work  
surface and switched to the Off position,  
“O/Off,” and that you have the safety motor  
drive cover in place of the high speed,  
blender drive.  
b. Remove the pusher/measuring cup  
c. Add the ingredients through the  
feed tube and replace the  
pusher/measuring cup.  
1. Before using the mixing bowl and  
slicing or grating discs for the first  
time they should be washed. See  
Before Using for the First Time, on  
page 4.  
3. If a large batch of dough is to be left in  
the mixing bowl and allowed to rise, the  
cover should be removed and placed  
loosely on the bowl so that it is free to  
move if the dough should begin to press  
on it.  
2. Make sure the safety motor drive cover  
has been snapped into place on the  
high-speed blender drive. Place the  
mixing bowl on the dual drive of the  
power unit, as shown in figure 4a, and  
turn the bowl clockwise with a slight  
downward pressure until bowl is firmly  
seated.  
How to Use Slicing and Grating Discs  
All the MCM models comes with the mixing  
bowl, cover and pusher/measuring cup and  
reversible slicing disc and reversible coarse  
grating disc, see figures 5h and 5i. The  
MCM 5200 also comes with a fine grating  
disc, as shown in figure 5g. The slicing disc  
and the grating discs are intended to be  
used for slicing and/or grating of vegetables,  
as well slicing/grating of soft cheeses and  
sausages or meat and grating of vegetables  
and hard cheese.  
3. Engage the slicing or grating disc,  
by picking up the disc you wish to use,  
with the side you wish to use facing  
upward, by the plastic holder in the  
center of the disc and placing over the  
rectangular shank of the dual drive of  
the power unit.  
14  
• place the cut zucchini or carrots in  
the feeding tube on end until the  
feeding tube is packed.  
WARNING  
The blades on the discs are very sharp.  
Handle with care. Use center plastic holder  
when handling discs.  
To slice a single narrow item, a carrot for  
example:  
• place the carrot in the feeding funnel  
opposite the cutting edge of the disc.  
4. Next place the mixing bowl cover on  
the bowl. Make sure arrows on cover  
and bowl are aligned, so that tabs on  
bowl fit into channels in cover and then  
turn cover clockwise until tab on cover  
enters cover interlock and turn until tab  
clicks into place,  
The wall of the feeding funnel will then serve  
to hold the piece vertical.  
When using the slicing or grating discs be  
sure to watch the level in the bowl and stop  
the slicing or grating before the level of the  
material being sliced, or grated reaches the  
level of the disc holder.  
The cover should be in place whenever  
the power unit is in operation. The cover  
serves to prevent accidental contact  
with the moving disc. Also, the power  
unit will not operate unless the tab on  
the cover is in place and has engaged  
the safety cover interlock.  
Slicing and grating tips:  
1. Shopping for fruits and vegetables that  
will fit into the feeding funnel will simplify  
food preparation.  
2. Foods that are to be used together may  
be sliced together. This can be used to  
your advantage. For example, green  
onions and celery are often used  
together, but feeding the green onions  
into the feeding funnel alone is difficult.  
Try slicing the green onions at the same  
time as the celery by interspersing  
them in the feeding funnel with the  
celery.  
Placing into Operation with Slicing or  
Grating Disc  
Make sure that the power unit is on a  
smooth, clean, suitable work surface and  
switched to the Off position, “O/Off.” Pull  
the electrical cord out to the necessary  
length and plug into a convenient outlet.  
The mixing bowl with the slicing or grating  
disc is now ready for operation.  
3. Use the slicing disc to shred lettuce.  
4. Do not overcook potatoes that are to  
be sliced. Also it is recommended that  
you let them cool first. Potatoes must  
be cool and firm to obtain the regular  
slices.  
Place items to be sliced, shredded or  
grated in feeding funnel and be sure to use  
the pusher to feed items into the discs when  
in operation.  
Learning how to feed food properly into the  
feed funnel is the most important factor for  
proper slicing and grating:  
1. For long slices or long shreds, place  
food into the feeding funnel lengthwise.  
2. For short or circular slices, place food  
in the feeding tube on end. For  
example, if you wish to have circular  
slices of zucchini or carrots:  
If the slicing/grating disc do not turn (even  
after trying the highest speed) and it is  
humming the disc has become blocked by  
the contents. The power unit should be:  
1. Switched to the Off position, “O/Off,”  
and unplugged.  
2. The top cover should be removed and  
the items causing the blockage  
removed.  
• cut to length not to extend above the  
top of the feeding tube.  
15  
If power unit is not functioning see  
TROUBLESHOOTING section.  
Note: The mixing bowl and its cover must  
be in place with the top cover rotated  
clockwise so that tab on cover  
engages the cover interlock before  
the blender can be used. See below.  
Removing Contents  
Before beginning to remove the contents  
from the mixing bowl, make sure that the  
power unit has been turned to the Off  
position, “O/Off,” and unplugged. Remove  
the cover by turning counterclockwise and  
lifting off. Once the cover has been  
removed, whatever tool was being used in  
the bowl may be removed by lifting it straight  
up.  
Blender with Unbreakable Plastic Jar  
The MCM 5100 UC and MCM 5200 UC  
Bosch Food Processor include the blender  
accessory. The blender accessory consists  
of the components shown in figure 9.  
The mixing bowl can be removed from the  
power unit by turning the bowl  
counterclockwise while lifting.  
WARNING  
1. There is a risk of injury from sharp  
blades when using the blender  
attachment.  
The contents may now be used as desired.  
2. Keep hands and utensils out of the  
blender jar while it is attached to the  
power unit.  
Care and Cleaning  
of Bowl and Its Accessories  
The mixing bowl, multifunction blade,  
whipping whisk, dough hook, reversible  
slicing disc, reversible grating disc and fine  
grating disc are dishwasher safe.  
3. Blades are sharp. Handle carefully.  
4. Always operate the blender with the  
cover in place. Always hold cover in  
place while operating the blender to  
prevent cover from coming loose.  
5. The use of attachments, including  
canning jars, not recommended by  
the manufacturer, may cause a risk  
of personal injury.  
It is recommended that the whipping whisk  
be removed from its holder for cleaning.  
After washing, rinsing and drying, the whisk  
may be placed back on the whisk holder  
by reversing the action to remove it, see  
figure 7.  
6. When blending hot and/or frothing  
liquids, process a maximum of 18 fluid  
ounces (0.5 litres) at a time.  
With the power unit turned Off and  
unplugged, it should be cleaned only with  
a clean, damp cloth. Then wipe off the safety  
motor drive cover and reinstall on the power  
unit, if necessary. Never use coarse or  
caustic cleaning products to clean the  
power unit. Never immerse the power unit  
in water.  
How to Use Blender  
The blender is intended to be used for  
crushing ice; mixing liquids; pureeing  
vegetables; preparing special diet and infant  
foods; pulverizing fruit, vegetables, nuts and  
dried bread (for bread crumbs); and  
preparing mayonnaise and sauces.  
Before beginning to attach this or any other  
attachment, make sure that the power unit  
is on a smooth, clean, suitable work  
surface and switched to the Off position,  
“O/Off.”  
It is recommended that, after cleaning, the  
mixing bowl and its cover be stored on the  
food processor. In this way, if you wish to  
at some later time to use the blender the  
mixing bowl and its cover will already be in  
place.  
16  
1. Before using the blender for the first  
time it should be washed. See Before  
Using for the First Time, on page 4.  
4. Place the blender jar/blade assembly  
on the high speed blender drive of the  
power unit and turn clockwise to lock  
in place, see figure 10a. Then place  
cover with cover closure/funnel on  
blender jar and turn clockwise to lock  
in place, figure 10b.  
Do not place the blender jar/blade  
assembly in the dishwasher or allow it  
to stand in water. This will tend to wash  
out the lubricant. After cleaning, rinse  
thoroughly and dry before using.  
Figure 10.  
Placing Blender into Operation  
Figure 9.  
Make sure that the power unit is on a  
smooth, clean, suitable work surface and  
switched to the Off position, “O/Off.” Pull  
the electrical cord out to the necessary  
length and plug into a convenient outlet.  
The blender is now ready for operation.  
9a. Cover closure/funnel  
9b. Cover  
9c. Blender jar/blade assembly  
2. Remove the safety motor drive cover  
from the high-speed blender drive.  
Normally when blending, the blender jar  
should be filled with the entire amount of  
material to be blended, if possible, before  
switching the appliance on. The cover and  
cover closure should always be in place after  
filling the blender jar and before switching  
the power unit to On. Any subsequent  
additions to the blended material should be  
made through the cover opening, see figure  
10. For solids and/or granular material,  
remove the cover closure/funnel to add the  
material, as shown in figure 11b. For liquids,  
3. Then place the mixing bowl on the dual  
drive of the power unit, as shown in  
figure 4a, and turn the bowl clockwise  
with a slight downward pressure until  
bowl is firmly seated. Next place the  
mixing bowl cover, with pusher/  
measuring cup in the feeding tube, on  
the bowl. Make sure arrows on cover  
and bowl are aligned, so that tabs on  
bowl fit into channels in cover and then  
turn cover clockwise until tab on cover  
enters cover interlock and turn until tab  
clicks into place, figure 4b.  
17  
When the blender is being used on dry  
materials, such as nuts or dry bread, the  
best results will be obtained when the  
blender jar is filled with approximately 1/2  
cup of material to be blended.  
the closure/funnel may be left in place and  
the liquids added by pouring it into the  
closure/funnel, see figure 11a.  
Example of Use of Blender  
To familiarize you with the operation of the  
blender, a sample recipe for mayonnaise is  
provided below:  
If the blender does not start (even after trying  
the highest speed) and it is humming, the  
blade has become blocked by the contents.  
The power unit should be:  
Mayonnaise Recipe  
whole egg  
1/3 cup of vegetable oil  
1. Switched to off, “O/Off,” and unplugged.  
2. The mixture should be removed and the  
contents at the bottom of the jar  
loosened.  
1
2
1
tablespoons lemon juice or light  
vinegar  
teaspoon sugar  
If power unit is not functioning see  
TROUBLESHOOTING section.  
1/2 teaspoon dry mustard  
1/2 teaspoon of salt  
2/3 cup of vegetable oil  
Removing Contents  
Before beginning to remove the contents  
from the blender, make sure that the power  
unit has been turned to the Off position,  
“O/Off,” and unplugged. Remove the blender  
from the power unit by turning the blender  
counterclockwise while lifting. With the  
blender removed from the power unit, the  
contents of the blender may now be poured  
into a suitable container or bowl, as desired.  
Mix all ingredients, except final 2/3’s cup  
of oil, for a few seconds at speed 1, then  
quickly pour the oil in through the opening  
in the cover in a uniformly thick stream, as  
shown in figure 11a. Operate the blender at  
highest speed until mixture is thick and  
smooth (approximately 10-20 seconds).  
Makes 1 1/4 cups.  
Care and Cleaning of Blender  
All components of the blender, except the  
blender jar/blade assembly, are dishwasher  
safe. It is recommended that the blender  
jar/blade assembly be cleaned only under  
flowing water rather than in the dishwasher.  
Soap and detergent will tend to wash out  
the bearing lubricant of the blade/base  
assembly. Do not use scouring cleaners on  
any of the blender parts.  
Tips:  
The blender should be operated with careful  
consideration as to what is required and/or  
desired. The speed at which the blender is  
operated and the length of operation for a  
given job will depend upon the degree of  
fineness desired or the amount being  
blended.  
With the power unit turned Off and  
unplugged, it should be cleaned only with  
a clean, damp cloth. Then wipe off the safety  
motor drive cover and reinstall on the power  
unit, if necessary. Never use coarse or  
caustic cleaning products to clean the  
power unit. Never immerse the power unit  
in water.  
Figure 11.  
18  
Citrus Juicer  
the center column and turning it  
clockwise, as shown in figure 13, until  
tab on cover enters cover interlock and  
turn until tab on the rim of the citrus  
juicer clicks into place.  
All the MCM models of the Bosch Food  
Processors include the citrus juicer  
accessory. The citrus juicer accessory is  
shown below, figure 12.  
Figure 12.  
How to Use Citrus Juicer  
The citrus juicer fits into the mixing bowl  
for juicing of citrus fruits such as oranges,  
lemons, grape fruit, etc. The juice is then  
collected in the mixing bowl.  
Use of mixing bowl with citrus juicer  
Before beginning to attach this or any other  
attachment, make sure that the power unit  
is on a smooth, clean, suitable work  
surface and switched to the Off position,  
“O/Off,” and that you have the safety motor  
drive cover in place of the high speed,  
blender drive.  
Figure 13.  
Placing into Operation w/Citrus Juicer  
Make sure that the power unit is on a  
smooth, clean, suitable work surface and  
switched to the Off position, “O/Off.” Pull  
the electrical cord out to the necessary  
length and plug into a convenient outlet.  
The mixing bowl with citrus juicer is now  
ready for operation.  
1. Before using the mixing bowl and citrus  
juicer for the first time, they should be  
washed. See Before Using for the  
First Time, on page 4.  
2. Make sure the safety motor drive cover  
has been snapped into place on the  
high-speed blender drive. Place the  
mixing bowl on the dual drive of the  
power unit, as shown in figure 4a, and  
turn the bowl clockwise with a slight  
downward pressure until bowl is firmly  
seated.  
Citrus juicer tips:  
Wash citrus fruit and cut in half for juicing.  
Set the rotary switch to speed 2 and press  
the fruit on the cone of the juicer. Be sure  
to check level of juice in bowl and empty  
juice into a suitable container before level  
of juice reaches level of bottom of strainer  
basket, see Removing Contents, below.  
3. Place the citrus juicer on the dual  
drive of the power unit by placing it over  
19  
1. Before using the mixing bowl and juice  
extractor for the first time, they should  
be washed. See Before Using for the  
First Time, on page 4.  
Removing Contents  
Before beginning to remove the contents  
from the bowl, make sure that the power  
unit has been turned to the Off position,  
“O/Off.” Remove the juicer and bowl from  
the power unit by turning the juicer and bowl  
counterclockwise while lifting. The  
contents of the bowl may now be poured  
into a suitable container.  
Care and Cleaning of Mixing Bowl with  
Citrus Juicer  
The bowl and citrus juicer are dishwasher  
safe. Do not use scouring cleaners on the  
bowl or citrus juicer.  
The power unit of the food processor should  
be cleaned with a clean, damp cloth only.  
Never use coarse or caustic cleaning  
products to clean this appliance. Never  
immerse the power unit in water.  
Figure 14.  
14a. pusher  
14b. cover  
14c. grater  
14d. strainer  
Juice Extractor  
The MCM 5200 UC, Bosch Food  
Processor, includes the juice extractor  
accessory. The juice extractor accessory  
consists of the components shown in figure  
14.  
2. Make sure the safety motor drive cover  
has been snapped into place on the  
high-speed blender drive. Place the  
mixing bowl on the dual drive of the  
power unit, as shown in figure 4a, and  
turn the bowl clockwise with a slight  
downward pressure until bowl is firmly  
seated.  
How to Use Juice Extractor  
The juice extractor is intended to be used  
with the mixing bowl to extract the juice  
from:  
hard fruits such as apples, pears,  
berries  
pitted fruits  
vegetables such as carrots and  
tomatoes.  
3. If the grater has not already been  
reassembled in the strainer after  
washing, place grater in the strainer of  
the juice extractor, making sure the two  
hooks on the strainer enter the two  
slots on the grater, and turn grater  
counterclockwise to lock grater and  
strainer together. Place grater/strainer  
assembly on the dual drive of the power  
unit by placing it over the center  
column, as shown in figure 15a. Then  
Use of mixing bowl with juice extractor  
Before beginning to attach this or any other  
attachment, make sure that the power unit  
is on a smooth, clean, suitable work  
surface and switched to the Off position,  
“O/Off,” and that you have the safety motor  
drive cover in place of the high speed,  
blender drive.  
20  
place the cover, with pusher on the bowl  
and turn clockwise until tab on cover  
enters cover interlock and turn until tab  
clicks into place, figure 15b.  
turning the cover counterclockwise while  
lifting. Then remove the grater/strainer.  
Empty pulp from the strainer, as required.  
If bowl needs to be emptied, pour juice into  
a suitable container.  
Placing into Operation with Juice  
Extractor  
Care and Cleaning of Mixing Bowl with  
Juice Extractor  
The bowl and juice extractor are dishwasher  
safe. Do not use scouring cleaners on the  
bowl or juice extractor.  
Make sure that the power unit is on a  
smooth, clean, suitable work surface and  
switched to the Off position, “O/Off.” Pull  
the electrical cord out to the necessary  
length and plug into a convenient outlet.  
The mixing bowl with juice extractor is now  
ready for operation.  
With the power unit turned Off and  
unplugged, it should be cleaned only with  
a clean, damp cloth. Then wipe off the safety  
motor drive cover and reinstall on the power  
unit, if necessary. Never use coarse or  
caustic cleaning products to clean the  
power unit. Never immerse the power unit  
in water.  
It is recommended that, after cleaning, the  
mixing bowl and its cover be stored on the  
food processor. In this way, if you wish at  
some later time to use the blender, the  
mixing bowl and its cover will already be in  
place.  
Figure 15.  
Juice Extractor tips:  
Wash fruit and cut to fit into feeding funnel,  
as required. Set the rotary switch to speed  
3 and feed fruit through feeding tube. Use  
pusher to feed in fruit, using light pressure.  
Be sure to check level of juice in bowl and  
empty juice into a suitable container before  
level of juice reaches level of bottom of  
strainer basket. Also watch strainer for pulp  
buildup and, if necessary, stop the power  
unit and remove pulp. See Removing  
Contents, below.  
Removing Contents  
Before beginning to remove the contents  
from the bowl or pulp from the strainer, make  
sure that the power unit has been turned to  
the Off position, “O/Off.” Remove the cover  
of the juice extractor from the bowl by  
21  
Service and Repair  
The Bosch Food Processors require no special care other than the care and cleaning noted  
in this manual. If you are having a problem with your food processor, before calling our  
Customer Support group, please refer to the TROUBLESHOOTING section below. If, after  
reviewing the troubleshooting section and trying its remedies, you are still having a problem,  
please do contact us by either writing to us at:  
Bosch Small Appliances  
Customer Support  
BSH Home Appliances  
5551 McFadden Avenue  
Huntington Beach, CA 92649  
or e-mailing us at:  
or calling us at:  
1 (866) 44BOSCH  
[1 (866) 442-6724]  
If you do write to us, please include your e-mail address or a daytime telephone number  
where you may be reached.  
Also, to view our full product line, please visit our Web site:  
22  
TROUBLESHOOTING  
Problem  
Possible Cause  
Remedy  
Power  
unit does  
not  
1.A circuit breaker may have  
tripped or a fuse has blown  
in the power supply circuit.  
Reset circuit breaker or  
replace fuse.  
function  
2.Safety motor drive cover is  
not in place on high speed,  
blender drive, when dual  
drive is being used.  
Place safety motor drive cover on  
high speed blender drive.  
3.The built-in safety cutout  
may have tripped.  
If the safety has tripped due to  
overheating:  
> Turn the power unit to the Off  
position, “O/Off,” and unplug.  
> Remove the attachment that was  
in use when safety tripped, and  
correct whatever the situation  
is that caused the safety to trip.  
> Contact Bosch Small Appliances  
Customer Support, see page 22,  
for closest Bosch authorized  
service center.  
> Take, or ship, the food processor  
to a Bosch authorized service  
center to have the safety cutout  
replaced.  
Rotary switch  
will not turn  
1.Safety cover interlock is not  
engaged.  
Safety cover interlock must be  
engaged before rotary switch can  
be turned. Rotate bowl cover or  
juicer tab clockwise until interlock  
tabs clicks into place.  
Power  
unit hums  
but  
nothing is  
moving  
1.The motor has become  
blocked; that is, the  
attachment being used has  
become jammed.  
> Turn the power unit to the Off  
position, “O/Off,” and unplug.  
> Remove the attachment  
that was in use and correct  
whatever the situation is that  
is causing the blockage.  
> Reinstall the attachment and  
resume use per attachments  
instructions.  
23  
Sample Recipes  
Salsa  
Fruit Smoothies  
2
2
1/2  
1
1–2  
1
cups fruit juice  
cups frozen fruit  
can frozen juice concentrate  
cup fruit-flavored yogurt  
cups of ice  
Chop the following ingredients in Bosch  
blender or food processor, on highest speed:  
1–4  
Dried Arabol Chilies  
(start with one, add more for  
increased spiciness)  
clove garlic  
fresh banana  
1
Place all ingredients in Bosch blender and  
mix until smooth, on highest speed.  
Experiment with different flavor  
combinations such as tropical, berry or  
melon.  
1/8  
8
cup water  
ounces tomato sauce (add  
half)  
Next add:  
1 1/2 teaspoons oregano  
3/4  
1
teaspoons cumin  
bunch of fresh cilantro  
pinch of salt  
second half of tomato sauce  
French Bread  
Blend all ingredients, on speed 1 or 2, until  
smooth.  
4
tablespoons active dry yeast  
3 1/2 cups hot water  
5
2
1
tablespoons sugar  
tablespoons salt  
cup vegetable oil  
Pesto  
1
cup loosely packed basil  
leaves  
cup grated Parmesan  
8–10 cups of flour (white or wheat)  
tablespoons gluten  
4
1/2  
1/3-1/2 cup olive oil (enough for  
desiredconsistency)  
Place all ingredients in Bosch mixing bowl.  
Thoroughly knead on speed 1 (8–10  
minutes). Let rise in the bowl 10 minutes,  
then punch down. Punch down 4 or 5 times.  
Divide into 3–4 regular loaf pans or shape  
into rounds. Slash tops with sharp knife and  
brush with egg wash. Let raise until doubled  
in size. Bake 30 minutes at 400° F.  
1–2  
1/4  
cloves garlic  
cup shelled pinenuts  
Lightly toast pinenuts. Let cool. Place olive  
oil in Bosch blender or food processor. Turn  
on power and gradually add Parmesan  
cheese, garlic and basil leaves. Process,  
on speed 1 or 2, until smooth. Add pinenuts  
and blend thoroughly.  
Toss with cooked pasta or spread on bread  
or crackers.  
24  
Oatmeal-Chocolate Chip Cookies  
2
1
2
1
cups packed brown sugar  
cup shortening  
eggs  
teaspoon vanilla  
1–3/4 cups flour  
1
teaspoon baking soda  
1/2  
3
1
teaspoon salt  
cups quick-cooking rolled oats  
cup chocolate chips  
Cream the brown sugar, shortening, eggs  
and vanilla in the mixing bowl, on speed 1  
or 2.Add flour, baking soda and salt. Blend  
well, stir in rolled oats and chocolate chips  
by hand. Drop by spoonfuls onto greased  
baking sheets. Bake in a 350° F oven for 8–  
10 minutes. Cool before removing from pan.  
Makes 5 dozen.  
Acknowledgments:  
The sample recipes listed above were sub-  
mitted by:  
Salsa - Caroline Ciarelli, BSH Home  
Appliances  
Pesto - Kitchen Resource  
Fruit Smoothies - Marni Rader, BSH  
Appliances  
French Bread - Kitchen Resource  
Oatmeal-Chocolate Chip Cookies -  
Kitchen Resource  
25  
I mportant Notes  
26  
BOSCH Small Appliance Warranty  
BSH HomeAppliances (“BOSCH”) warrants all new small appliances to be free from original  
defects in design, materials and workmanship for one (1) year after the sale to the original  
owner.  
Within the stated warranty period, BOSCH will repair or replace, at its sole option, any  
small appliance or parts thereof which prove defective under the conditions of normal use  
and service at no charge to you. It is the owner’s responsibility to return the appliance for  
repair. Repaired and replacement small appliances and parts shall be the same or as  
close in appearance as possible to the original for the purposes of this warranty.  
Should you require service of your BOSCH small appliance, please contact customer  
service at 1-866-44-BOSCH. Repair of BOSCH appliances should only be performed by  
qualified technicians.  
This warranty is limited to the original consumer purchase and is not transferable. Specifically  
excluded from this warranty are failures caused by accident, misuse, neglect, abuse,  
including tampering, use of frequency or voltage other than marked on the product, and  
use for commercial purposes.  
To the extent allowed by law, this warranty sets out your exclusive remedies, whether for  
negligence or otherwise. BOSCH will not be liable for any consequential or incidental  
damages, losses or expenses. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESSED  
WARRANTIES. ANY WARRANTY IMPLIED BY LAW, WHETHER FOR  
MERCHANTABILITY OR FITNESS FORAPARTICULAR PURPOSE OR OTHERWISE,  
SHALL BE EFFECTIVE ONLYFOR THE PERIOD THAT THIS EXPRESSED WARRANTY  
IS EFFECTIVE. BOSCH DOES NOTASSUMEANY RESPONSIBILITY FOR INCIDENTAL  
OR CONSEQUENTIAL DAMAGES.  
No attempt to alter, modify or amend this warranty shall be effective unless authorized in  
writing by an officer of BOSCH. Some states do not allow limitations on how long implied  
warranties last or the exclusion or limitation of incidental or consequential damages, so  
the foregoing limitations and exclusions may not apply to you. This warranty gives you  
specific legal rights and you may also have other rights which vary from state to state.  
27  
Looking for more information about BOSCH products?  
Visit our Web site:  
28  

ADS Technologies Mini DualTV User Manual
Behringer Car Amplifier EPQ2000 User Manual
Blaupunkt Bologna C50 User Manual
Bunn ULTRA 2 User Manual
Canon 115U User Manual
Clarion DXZ778RUSB User Manual
Eclipse Fujitsu Ten CD5444 User Manual
Fujitsu FMWCC38 User Manual
Hitachi VMH955LA User Manual
JVC 0609SKMLGEEGL User Manual