Bosch Appliances MUM 6630 UC User Manual

Owner’s Manual  
Universal Series Kitchen Machines  
for models:  
MUM 6610 UC • MUM 6622 UC  
MUM 6630 UC  
READ THIS MANUAL  
thoroughly for important safety and operating  
instructions before using this appliance.  
TABLE OF CONTENTS  
IMPORTANT SAFEGUARDS .................................................................. 2  
Table of contents..................................................................................... 3  
ABOUT YOUR KITCHEN MACHINE ....................................................... 4  
Bosch Universal Series Kitchen Machine ................................................ 4  
Unpacking............................................................................................... 4  
Electrical specifications ............................................................................ 4  
Before using for the first time .................................................................. 4  
Getting to know your Bosch Kitchen Machine .......................................... 4  
Special accessories ..................................................................... 6  
Power unit features ................................................................................. 6  
Getting started ..................................................................................... 7-9  
STANDARDATTACHMENTS ................................................................... 9  
Mixing bowl w/twin beating whisks and dough hook ................................ 9  
How to use dough hook ......................................................... 10-11  
Placing into operation with dough hook....................................... 11  
How to use twin beating whisks .................................................. 11  
Use of mixing bowl with twin beating whisks............................... 11  
Operation with dough hook and whisk assembly.......................... 12  
Placing into operation with twin beating whisks .......................... 13  
Care and cleaning of bowl and its accessories ........................... 14  
Blender with unbreakable plastic jar ........................................................ 14  
How to use blender...................................................................... 15  
Placing blender into operation...................................................... 16  
Example of use of blender ........................................................... 16  
Care and cleaning of blender........................................................ 17  
Slicer/shredder with unbreakable bowl and “Universal” beater ................. 17  
Slicer/shredder, intended use ...................................................... 18  
Placing slicer/shredder into operation .......................................... 19  
How to use “Universal” beater ..................................................... 20  
Placing into operation with “Universal” beater .............................. 21  
Care and cleaning of slicer/shredder with “Universal” beater ......... 21  
Stainless steel bowl with dough hook ..................................................... 22  
How to use dough hook ............................................................... 22  
Use of stainless steel bowl and dough hook ................................ 22  
Placing into operation with dough hook....................................... 23  
Care and cleaning of stainless steel bowl ................................... 23  
SERVICE and REPAIR .......................................................................... 24  
TROUBLESHOOTING ................................................................. 25  
SAMPLE RECIPES .......................................................................... 26-27  
SPECIALACCESSORIES ..................................................................... 28  
BOSCH small appliance warranty ........................................................... 31  
HOUSEHOLD USE ONLY  
3
Unpacking  
ABOUT YOUR KITCHEN MACHINE  
Carefully remove the power unit from its  
packaging and place it on the counter so it  
is ready to use. As you remove the  
accessories from the carton, check them  
against figure 1 to assure that all the  
standard parts are present.  
Congratulations on having selected one of  
the Bosch Universal Series Kitchen  
Machines.Aseries of kitchen machines that  
we and—thankfully—cooking professionals  
the world over, feel are the best household-  
type kitchen machines available.  
Electrical Specifications  
Check to make sure that the voltage on  
which your kitchen machine is to operate  
is the same as specified on the rating plate.  
Standard North American models have an  
electrical power rating of 700-watt maximum  
power rating with the attachment that draws  
the most power (some attachments may  
draw less power).  
As you read through these instructions,  
please pay particular attention to the  
IMPORTANT SAFEGUARDS. Specific  
safeguards for the attachments, as well as  
warnings and cautions, are provided in each  
section describing the operation of that  
particular attachment.  
Before Using for the First Time  
Bosch Universal Series Kitchen  
Machine  
The Bosch Universal Series Kitchen  
Machine is available in 3 models:  
Before using any of the attachments for the  
first time it is recommended they be washed,  
rinsed well and dried. Of the attachments  
supplied with the systems in this manual,  
all parts, except the whisk holder for the  
twin beating whisks and the blender’s  
blade/base assembly, are dishwasher safe:  
The MUM 6610 UC  
comprised of the electronic power unit  
with integral cord storage, six-quart  
capacity mixing bowl, splash ring and  
cover (MUZ 6 KR3), twin beating whisks,  
dough hook and motor drive cover.  
> The whisk holder should be hand  
washed in warm soapy water, rinsed  
and dried.  
> The blender’s blade/base assembly  
should be washed under running water  
and dried.  
The MUM 6622 UC  
comprised of the electronic power unit  
with integral cord storage, six-quart  
capacity mixing bowl, splash ring and  
cover (MUZ 6 KR3), twin beating whisks,  
dough hook, six-cup capacity blender  
(MUZ 6 MX2) and motor drive cover.  
Note: It is recommended that the  
blender’s blade/base assembly  
never be left to stand in water or  
soap solution, to prevent the bearing  
lubricant from being washed out.  
The MUM 6630 UC  
Getting to Know Your Bosch Kitchen  
Machine  
comprised of the electronic power unit  
with integral cord storage, six-quart  
capacity mixing bowl, splash ring and  
cover (MUZ 6 KR3), stainless steel  
mixing bowl (MUZ 6 ER1), twin beating  
whisks, dough hook, slicer/shredder  
(MUZ 6 RR2) with universal beater (MUZ  
6 RG3) and motor drive cover.  
The Bosch Universal Series Kitchen  
Machines are comprised of various  
attachments, depending on the system  
purchased (see above). In addition to the  
attachments listed on the previous pages  
that are available with the standard systems,  
Bosch offers many special accessories.  
4
MUM 6610 UC  
MUM 6622 UC  
MUM 6630 UC  
Figure 1  
5
Electronic speed control  
Special Accessories  
Five-position rotary switch (figure 2a) is  
located at the front of the power unit: 3  
speeds plus a momentary pulse function  
and a stop position “O/Off,” see figure 2a.  
To allow you to get the most service from  
your Bosch Universal Series Kitchen  
Machine, Bosch engineers have designed  
a line of special accessories to expand the  
usefulness of your machine. In addition to  
the attachments that come with the various  
Universal Series Kitchen Machines, there  
are optional accessories that can be ordered  
separately. These accessories include a  
food and meat grinder, grain mills and citrus  
juicer, plus additional attachments that can  
be used with the meat grinder: fancy cookie  
attachment, fruit pulper, pasta-making disks  
and grater attachment. See SPECIAL  
ACCESSORIES, at the back of this  
booklet, page 28. Or, to view all currently  
available accessories, visit our Web site at  
Built-in Safety Cutout  
The Universal Series Kitchen Machines are  
provided with a built-in safety cutout switch  
(figure 2b) to protect the motor against  
overheating.  
If the safety cutout trips:  
a. Turn the machine to the off position  
“O/Off” and unplug.  
b. Wait a few minutes to allow the motor  
to cool.  
c. Depress the manual reset button.  
You will find the reset button on the  
bottom of the machine, see figure  
2b.  
After allowing the machine to cool and  
resetting the safety cutout switch, the  
machine is again ready for use. The motor  
should then start when plugged in and turned  
to one of its 3 speeds or when turned on  
and placed in momentary contact position.  
Our work on expanding the usefulness of  
the Bosch Kitchen Machine is a continuing  
process. If there is some type of accessory  
in which you are interested in, that is not  
included at the back of the book, please  
either write us at:  
Dual drives  
The Universal Series Kitchen Machines  
come with two drives:  
Bosch Small Appliances  
Customer Support  
BSH HomeAppliances  
5551 McFaddenAvenue  
Huntington Beach, CA 92649  
1. A high-speed drive directly coupled to  
the motor, used to drive the blender, food  
processor and other special  
accessories.  
2. A high-torque drive used to drive the  
stirring/beating whisks, dough hook,  
meat grinder and other special  
accessories.  
or call us at:  
1 (866) 44BOSCH  
[1 (866) 442-6724]  
Power Unit Features  
Motor drive cover  
All MUM 6000 power units have the following  
features, refer to figure 2:  
Used to cover drive that is not in use, see  
figure 2c.  
700-watt motor  
Convenient cord storage  
The most powerful motor offered with any  
household kitchen machine.  
Convenient cord storage is located on the  
back of the power unit, see 2d.  
6
Integrated hand grips  
Getting Started  
The operation of your Bosch Universal  
Series Kitchen Machine is summarized  
below.  
Side recesses molded into each end of the  
power unit housing provide for easy lifting  
and carrying of power unit when not in use,  
see 2e.  
Specific instructions for using each of the  
attachments, provided with the kitchen  
machine systems covered by this manual,  
follow the summarized instructions. Please  
read the specific instructions thoroughly  
before using that attachment, paying  
particular attention to the IMPORTANT  
SAFEGUARDS and WARNINGS provided.  
Four rubber feet  
Four rubber feet provide the ultimate in  
stability, while also serving to isolate the  
power unit from the hard surface to minimize  
noise and vibration.  
Figure 2.  
7
1. Place power unit on suitable work  
surface.  
rotary switch at the front of the power  
unit. See figure 2a. The rotary switch  
has five positions:  
Before using the machine with any of  
the attachments, the power unit should  
be placed on a suitable work surface.  
The surface should be sturdy, smooth  
and clean; make sure that there is no  
flour or oil on the surface. A clean,  
smooth surface will provide the best  
footing for the suction cup feet on  
the power unit and will limit slipping  
and/or “walking.”  
a. “M,” a momentary “pulse” position  
that provides full speed and power  
for the time it is held in position.  
b. “O/Off,” the off position.  
c. Four speeds labeled 1, 2 and 3.  
Speed 1 is the lowest speed. The  
speed increases with each  
succeeding step up to the highest  
speed, speed 3.  
2. Plug power unit into power supply.  
Unwind the power unit’s cord to  
appropriate length and plug it into  
a convenient nearby receptacle.  
All models of the Bosch Universal  
Series Kitchen Machines incorporate  
a built-in safety cutout switch to  
protect the motor against overheating.  
If the safety becomes activated, the  
power unit will stop. If power unit  
should stop even though there is power  
to the unit see TROUBLESHOOTING  
at the back of this manual .  
3. Remove motor drive cover.  
If necessary, remove motor drive cover  
from drive that will be used and place  
it on drive that will not be used. The  
cover, when placed on the high-speed  
drive, can be locked in position by  
pressing down and turning  
counterclockwise, see figure 2c.  
6. Turn power unit off.  
When your work with the attachment  
is completed or the capacity of the  
batch-feed attachment has been  
reached, turn the power unit to the Off  
position, “O/Off,” and unplug.  
4. Select attachment to be used.  
Select the attachment you wish to use  
and place on power unit. See specific  
instructions for attachment selected.  
Specific instructions are located on  
pages listed below:  
7. Remove the attachment.  
Remove the attachment from the  
power unit, per instructions for the  
specific attachment being used.  
Attachment  
Pages  
Mixing bowl w/dough hook ........ 9–11  
Mixing bowl w/twin whisks ....... 11–14  
Blender ..................................... 14–17  
Slicer/shredder ......................... 17–21  
Stainless steel bowl................. 22–23  
8. Continue use.  
If the attachment was of the batch-feed  
type and you wish to continue using  
the attachment, empty the bowl or jar  
of the attachment per its specific  
instructions and reinstall the  
attachment as before. Repeat steps  
5 through 7 as often as necessary to  
complete work.  
Table 1.  
5. Operate unit with rotary switch.  
Once the attachment is in place, the  
speed of its moving components can  
be controlled through the use of the  
8
STANDARDATTACHMENTS  
9. Work completed,  
Following are the specific instructions for  
the standard attachments provided with the  
Bosch Universal Series Kitchen Machines  
covered by this manual.  
remove attachment.  
If the attachment is of the continuous  
feed type or is the batch type and you  
have completed the work you wished  
to perform with the attachment,  
remove the attachment from the power  
unit per the instructions for the specific  
attachment being used.  
Mixing Bowl with Twin Beating Whisks  
and Dough Hook  
(MUZ 6 KR3)  
10. Place contents (batch-feed type).  
If the attachment is the batch feed  
type, disassemble per the specific  
attachment’s instructions and place  
the contents in a suitable container.  
WARNING  
1. There is a risk of injury from rotating  
tools when using the mixing bowl with  
the dough hook or the twin beating  
whisks.  
11. Care and cleaning.  
2. Avoid contact with moving parts. Keep  
hands, hair and clothing, as well as  
spatulas, bowl scrapers and other  
utensils away from dough hook and  
whisks during operation to prevent  
injury and/or damage to the power unit  
or accessories.  
Once you have completed working  
with the Bosch Kitchen Machine, the  
next step is to disassemble and clean  
the attachments. If you wish to use  
another attachment, please return to  
step 4, above.  
3. Always work with the bowl lid and  
splash ring fitted in place.  
4. Do not change tools until the power unit  
has come to a complete stop; when  
switched Off, the power unit will continue  
to turn for a brief period.  
Power unit  
With the power unit turned Off and  
unplugged, it should be cleaned only with  
a clean, damp cloth. Then wipe off the motor  
drive cover and reinstall on the power unit.  
Never use coarse or caustic cleaning  
products to clean the power unit. Never  
immerse the power unit in water.  
All models of the Bosch Universal Series  
Kitchen Machines are provided with a six-  
quart mixing bowl with twin beating whisks  
and dough hook. The MUM 6630 UC also  
comes with a stainless-steel bowl MUZ 6  
ER1, see figure 1. If additional mixing bowls  
are desired, they are available as accessory  
items under the part numbers: MUZ 6 ER1  
and/or MUZ 6 KR3, refer to the SPECIAL  
ACCESSORIES section at the back of this  
manual. The mixing bowl with dough hook  
and twin beating whisks consists of the  
following components, dependent upon the  
system you have, see figure 3:  
The power unit may be left on the counter  
or stored for future use. If the unit will be  
stored, wind the cord around the cord holder  
and, using the carry grips, lift the power  
unit and place in your chosen storage area.  
Attachments  
The attachment(s) that have been used  
should be disassembled and washed, per  
their specific instructions, dried and stored  
for future use.  
9
surface and switched to the Off position,  
“O/Off,” and that you have, if necessary,  
moved the motor drive cover to the drive  
that will not be used.  
1. Before using the mixing bowl and  
dough hook for the first time, it  
is recommended that the bowl,  
cover, splash ring and dough hook be  
washed.All components of the mixing  
bowl and the dough hook are  
dishwasher safe. Or they may be  
washed in warm soapy water. After  
washing, rinse well and dry before  
using.  
2. If you have not already done so, move  
the motor drive cover to the high-speed  
drive. Place the mixing bowl on the drive  
of the power unit and turn the bowl  
counterclockwise with a slight  
downward pressure until bowl is firmly  
seated, see figure 4a.  
Figure 3.  
3a. Bowl with cover and splash ring  
3b. Dough hook  
Figure 4.  
3c. Twin beating whisks  
CAUTION  
How to Use Dough Hook  
Failure to make sure that the bowl is  
properly seated on the drive coupling before  
the power unit is turned On can result in  
damage to the bowl and/or coupling.  
The dough hook and mixing bowl are  
intended to be used to knead yeast doughs  
and to mix cookie and pastry doughs, and  
also when adding nuts, chocolate chips,  
dried fruit, hard butter or shortening,  
hardened brown sugar, etc. to batters.  
3. Engage the dough hook on the  
driveshaft of the mixing bowl by placing  
it over the center column, as shown in  
figure 4b. Once in place, check to make  
sure dough hook has engaged the  
driveshaft by turning the dough hook  
Use of mixing bowl with dough hook  
Before beginning to attach this or any other  
attachment, make sure that the power unit  
is on a smooth, clean, suitable work  
10  
clockwise while pushing down until it  
stops.  
How to Use Twin Beating Whisks  
All Bosch Universal Series Kitchen  
Machines come with a twin beating whisk  
assembly, see figure 4c.  
4. Place the splash ring on the bowl,  
making sure the tabs on the bowl fit  
into the recesses in the splash ring,  
and turn counterclockwise, see figure  
5a. Then place the cover on the splash  
ring so that the tabs on the splash ring  
fit into the recesses in the bowl cover  
and turn the cover counterclockwise to  
fasten the bowl cover to the bowl. See  
figure 5b.  
The twin beating whisks and mixing bowl  
are intended to be used for very light  
substances, such as cream, egg whites,  
sauces, batters and light pastry doughs  
that are thin enough to pour.  
The dough hook should be used for all  
heavier substances such as cookie doughs,  
yeast doughs, pastry doughs and other  
heavy doughs. The dough hook should  
always be used when adding nuts,  
chocolate chips, dried fruits, hard butter or  
other fats, hardened brown sugar, etc. to a  
mixture.  
The splash ring and cover should be in  
place whenever the power unit is in  
operation. The splash ring and cover  
serve to prevent the escape of flour  
dust at the beginning of the stirring and  
kneading process, and also serves to  
prevent accidental contact with the  
moving dough hook.  
Use of mixing bowl with twin beating whisks  
Before beginning to attach this or any other  
attachment, make sure that the power unit  
is on a smooth, clean, suitable surface and  
switched to off position, “O/Off,” and that  
you have moved the motor drive cover.  
1. Before using the mixing bowl and twin  
beating whisk assembly for the first  
time, it is recommended that the bowl,  
anti-splash cover, filling funnel cap and  
twin beating whisk assembly be  
washed. All components of the mixing  
bowl and the twin beating whisk  
assembly are dishwasher safe, except  
the whisk holder.  
Figure 5.  
Placing into Operation w/Dough Hook  
Make sure that the power unit is on a  
smooth, clean, suitable work surface and  
switched to the Off position, “O/Off.” Unwind  
the electrical cord to the necessary length  
and plug into a convenient outlet. The mixing  
bowl with dough hook is now ready for  
operation. See table 1 for examples  
demonstrating the use of the dough hook  
attachment. Sample recipes may also be  
found in the recipe section, at the back of  
this manual.  
The whisks may be removed from the  
whisk holder as shown in figure 7a, and  
washed in the dishwasher along with  
the mixing bowl and other components.  
The whisk holder should be washed in  
warm soapy water.After washing, rinse  
well and dry the whisk holder before  
reattaching the whisks as shown in  
figure 7b.  
11  
OPERATION WITH DOUGH HOOK AND WHISK ASSEMBLY  
Below you will find a table listing examples of how the dough hook and the whisk  
assembly are to be used for various typical applications.  
Attachment Ingredients  
Speed Time  
Max.  
Amount  
Twin beating  
whisks  
Egg whites (2)  
3
2 min.  
(approx.)  
20 eggs  
(approx.)  
Whipping cream  
3
2 min.  
6 cups  
(approx.)  
Sponge cake (any recipe)  
Combine all ingredients  
Whip  
1
3
3x basic  
recipe  
(6 layers)  
1/2 min.  
4–6 min.  
Fold in flour mixture  
Mix  
M
(pulse)  
3
3 min  
(approx.)  
Basic cake batter  
Combine all ingredients  
1
3
1/2 min.  
3 min.  
3x basic  
recipe  
(6 layers)  
Mix  
Twin beating  
whisks/dough  
hook  
Cookie dough  
Cream soft butter or shortening  
and sugar using twin  
beating whisks  
1
1/2 min.  
3x basic  
recipe  
(9 dozen  
cookies)  
Combine flour alternately with  
liquid using dough hook  
Stir in nuts, chocolate chips,  
etc. using dough hook  
3
3 min.  
(approx.)  
2 or 3  
Dough hook  
Yeast dough  
Combine all wet ingredients  
Add flour in portions  
1
1/2 min.  
5 min.  
3x basic  
recipe  
1 or 2  
(approx.)  
(10, 1 lb.  
loaves)  
Table 1. Examples of operation using whisk assembly and dough hook. Speed 1 should  
be used for initial stirring and combining. Place all ingredients into the mixing bowl, liquids  
first. Shortening must be soft (room temperature).  
12  
2. If you have not already done so, move  
the motor drive cover to the high-speed  
drive. Place the mixing bowl on the drive  
of the power unit and turn the bowl  
counterclockwise with a slight  
downward pressure until bowl is firmly  
seated, see figure 4a.  
The splash ring and cover should be in  
place whenever the power unit is in  
operation. The splash ring and cover  
serve to prevent the escape of flour  
dust at the beginning of the stirring and  
kneading process, and also serves to  
prevent accidental contact with the  
moving whisks.  
CAUTION  
Failure to make sure that the bowl is  
properly seated on the drive coupling before  
the power unit is turned on can result in  
damage to the bowl and/or coupling.  
Placing into Operation w/Twin Beating  
Whisks  
Make sure that the switch is in the off  
position, “O/Off.” Unwind the electrical cord  
to the necessary length and plug into the  
wall outlet. The bowl with whisk assembly  
is now ready for operation. See table 1 for  
examples demonstrating the use of the twin  
beating whisks.  
3. Place and engage the twin beating  
whisk assembly on the driveshaft of the  
mixing bowl as shown in figure 6.  
Mixing bowl tips:  
1. When using the mixing bowl to knead  
or mix a recipe designed to be  
prepared by hand, you will find that with  
the Bosch Kitchen Machine you can  
usually place all the ingredients in the  
mixing bowl at once. When doing this,  
always place the liquids in first. This  
will assure more thorough mixing.  
2. When adding ingredients to a mixture:  
a. Turn the rotary switch to a lower  
speed;  
b. Remove the cover from the splash  
ring;  
Figure 6.  
c. Add the ingredients through the  
cover opening and replace the  
cover.  
4. Place the splash ring on the cover,  
making sure the tabs on the bowl fit  
into the recesses in the splash ring,  
and turn counterclockwise, see figure  
5a. Then place the cover on the splash  
ring so that the tabs on the splash ring  
fit into the recesses in the bowl cover  
and turn the cover counterclockwise to  
fasten the bowl cover to the bowl. See  
figure 5b.  
3. If a large batch of dough is to be left in  
the mixing bowl and allowed to rise, the  
cover and splash ring should be  
removed and placed loosely on the bowl  
so that it is free to move if the dough  
should begin to press on it.  
13  
Blender with Unbreakable Plastic Jar  
(MUZ 7 MX1)  
Removing Contents  
Before beginning to remove the contents  
from the mixing bowl, make sure that the  
power unit has been turned to the Off  
position, “O/Off.” Remove the cover and  
splash ring by turning clockwise and lifting  
off. Once the cover and splash ring have  
been removed, the dough hook or the twin  
beating whisks may be removed by turning  
the hook or whisk assembly clockwise while  
lifting.  
WARNING  
1. There is a risk of injury from sharp  
blades when using the blender  
attachment.  
2. Keep hands and utensils out of the  
blender jar while it is attached to the  
power unit.  
3. Blades are sharp. Handle carefully.  
4. To avoid injury, never place blade  
assembly on power unit without  
blender jar properly attached.  
The mixing bowl can be removed from the  
power unit by turning the bowl clockwise  
while lifting.  
5. Always operate the blender with the  
cover in place. Always hold cover in  
place while operating the blender to  
prevent cover from coming loose.  
6. The use of attachments, including  
canning jars, not recommended by  
the manufacturer, may cause a risk  
of personal injury.  
The contents may now be used as desired.  
Care and Cleaning  
of Bowl and Its Accessories  
Except for the whisk holder and the dough  
hook, the mixing bowl and its accessories  
are dishwasher safe.  
7. When blending hot and/or frothing  
liquids, process a maximum of 18 fluid  
ounces (0.5 litres) at a time.  
It is recommended that the whisk holder  
and the dough hook be washed by hand in  
warm soapy water, rinsed well and dried  
after each use. The whisks can be removed  
from the whisk holder by simply pulling them  
off, see figure 7a.  
Figure 7.  
After washing, rinsing and drying, the  
whisks may be placed back on the whisk  
holder by reversing the action to remove  
them, see figure 7b. Press them on until  
they snap into place.  
Figure 8.  
The power unit of the kitchen machine  
should be cleaned using a clean, damp  
cloth only. Never use coarse or caustic  
cleaning products to clean this appliance.  
Never immerse the power unit in water.  
8a. Cover closure/funnel  
8b. Cover  
8c. Blender jar  
8d. Gasket  
8e. Blade/base assembly  
14  
The MUM 6622 UC Bosch Universal Series  
Kitchen Machine includes the MUZ 6 MX2  
blender accessory. The blender accessory  
consists of, figure 8.  
How to Use Blender  
The blender has been designed for crushing  
ice; mixing liquids; pureeing vegetables;  
preparing special diet and infant foods;  
pulverizing fruit, vegetables, nuts and dried  
bread (for bread crumbs); and preparing  
mayonnaise and sauces.  
Figure 9.  
Before beginning to use this or any other  
attachment, make sure that the power unit  
is on a clean, smooth, suitable work  
surface and switched to off position, “O/Off,”  
and that you have removed the motor drive  
cover.  
2. To assemble or reassemble blade/base  
assembly into the blender, insert the  
blade/base assembly into the blender  
jar and press down on the blade/base  
assembly. Turn clockwise to the stop,  
see figure 11. The blade/base assembly  
is then back in place.  
1. Before using the blender for the first  
time, it is recommended that the  
blender jar cover, closure/funnel and  
blade/base assembly be washed. All  
components, except the blade/base  
assembly, are dishwasher safe.  
Remove the blade/base assembly from  
the blender, see figure 9.  
CAUTION  
Blade/base assembly is very sharp.  
Handle with care.  
The blade/base assembly may be  
easily removed by inverting the blender  
and using the blender cover to fit over  
the tabs on the blade/base assembly.  
Turn it counterclockwise until it stops,  
see figure 9a, and then lift up, figure 9b.  
Figure 10.  
Wash the blade/base assembly under  
running water. Do not place the blade/  
base assembly in the dishwasher or  
allow it to stand in water. This will tend  
to wash out the lubricant. After  
cleaning, rinse thoroughly and dry  
before using.  
3. If you have not already done so, move  
the motor drive cover to the high-speed  
drive. Place the blender on the high-  
torque drive of the power unit and turn  
the blender counterclockwise with a  
slight downward pressure until the jar  
is firmly seated, see figure 11.  
15  
Example of Use of Blender  
To familiarize you with the operation of the  
blender, a sample recipe for mayonnaise is  
provided below:  
Mayonnaise Recipe  
1
whole egg  
1/3 cup of vegetable oil  
2
1
tablespoons lemon juice or light  
vinegar  
teaspoon sugar  
1/2 teaspoon dry mustard  
1/2 teaspoon of salt  
2/3 cup of vegetable oil  
Mix all ingredients, except final 2/3’s cup  
of oil, for a few seconds at speed 1, then  
quickly pour the oil in through the opening  
in the cover in a uniformly thick stream, as  
shown in figure 14b. Operate the blender at  
speeds 1 or 4 until mixture is thick and  
smooth (approximately 10-20 seconds).  
Makes 1 1/4 cups.  
Figure 11.  
Placing Blender into Operation  
Make sure that the switch is in the off  
position, “O/Off.” Unwind the electrical cord  
to the necessary length and plug into wall  
outlet. The blender is now ready for  
operation.  
Normally when blending, the blender jar  
should be filled with the entire amount of  
material to be blended, if possible, before  
switching the appliance on. The cover and  
cover closure should always be in place after  
filling the blender jar and before switching  
the power unit to On. Any subsequent  
additions to the blended material should be  
made through the cover opening, see figure  
12. For solids and/or granular material,  
remove the cover closure/funnel to add the  
material, as shown in figure 12a. For liquids,  
the closure/funnel may be left in place and  
the liquids added by pouring it into the  
closure/funnel, see figure 12b.  
Figure 12.  
Tips:  
The blender should be operated with careful  
consideration as to what is required and/or  
desired. The speed at which the blender is  
operated and the length of operation for a  
given job will depend upon the degree of  
fineness desired or the amount being  
blended.  
16  

Alpine Electronics Car Stereo System CDE 110C User Manual
Audiovox AV 970 User Manual
Audiovox MP5620 User Manual
Canon MV 3 MC User Manual
Cateye CC 8000 User Manual
Eclipse Fujitsu Ten CH3083 User Manual
HP (Hewlett Packard) Hewlett Packard Car Video System 1910 User Manual
JBL A6000GTi User Manual
JVC EVERIO GZHM450RUS User Manual
JVC GET0291 002A User Manual