Radio CD MP3 WMA
Santa Cruz MP36
Valencia MP36
7 646 070 310
7 646 080 310
Operating instructions
Controls
1 On/Off button
8 DISPL button
Short press: Mutes the device.
Long press: Switches the device off.
Shortpress:Brieflydisplaysalternative
display contents (e.g. time).
Long press: Changes display contents.
2
button to open the flip-release con-
trol panel.
9 MENU button
Short press: Calls up the menu for ba-
sic settings.
Long press: Starts the Scan function.
3 Volume control
4 SOURCE button to switch sources be-
tween radio, CD, CD changer (if con-
nected) and AUX.
: Arrow buttons
; Buttons 1 - 6
5 AUDIO button to adjust bass, treble,
centre, subout, balance and fader.
Switching X-BASS on/off and adjust-
ing it.
<
button (Eject) for removing a CD
from the device.
Selects an equalizer presetting.
6 BND•TS button
Short press: Selects the FM memory
banks and the MW and LW wavebands.
Long press: Starts the Travelstore func-
tion.
7 TRA•RDS button
Short press: Switches traffic informa-
tion standby on/off.
Long press: Switches convenient RDS
function on/off.
32
Contents
Notes and accessories...................... 35 Traffic information........................... 45
Disposal of old unit
Switching traffic information
priority on/off ...............................45
Setting the volume for traffic
(EU countries only) ........................35
Installation....................................35
Optional equipment(not part of the
scope of delivery)..........................35
Detachable control panel ................. 36
Theft protection.............................36
Detaching the control panel.............37
Attaching the control panel..............37
Switch-off time (OFF TIMER)...........37
announcements.............................46
CD mode ......................................... 46
Switching to CD mode ....................46
Selecting tracks.............................47
Fast track selection ........................47
Fast searching (audible)..................47
Random track play (MIX).................47
Scanning tracks (SCAN)..................47
Repeating tracks (REPEAT) .............48
Interrupting playback (PAUSE).........48
Configuring the display...................48
Traffic announcements in CD mode ..48
Ejecting a CD.................................48
Switching on/off.............................. 38
Adjusting the volume ....................... 38
Setting the power-on volume ...........38
Quickly reducing the volume (Mute)..39
Muting during telephone mode ........39
Switching the confirmation
MP3/WMA mode ............................. 49
Preparing an MP3 CD .....................49
Switching to MP3 mode..................50
Configuring the display...................50
Configuring the MP3 scrolling texts...51
Selecting a directory ......................51
Selecting Tracks/Files.....................51
Fast search ...................................51
Random track play – MIX.................51
Scanning tracks – SCAN .................52
Repeated playback of individual
beep on/off...................................39
Radio mode ..................................... 40
Adjusting the tuner.........................40
Switching to radio mode .................40
Convenient RDS functions (AF, REG) 40
Selecting the waveband/
memory bank................................41
Tuning into a station .......................41
Setting the sensitivity of station
seek tuning...................................42
Storing stations .............................42
Storing stations automatically
(Travelstore) .................................42
Listening to stored stations .............43
Scanningreceivablestations(SCAN) ...43
Setting the scanning time................43
Programme type (PTY) ..................43
Optimising radio reception..............45
Configuring the display...................45
tracks or entire directories –
REPEAT .......................................52
Interrupting playback (PAUSE).........52
33
Contents
CD-changer mode ............................ 53 Adjusting the display settings........... 58
Switching to CD-changer mode........53
Selecting CDs................................53
Selecting tracks.............................53
Fast searching (audible)..................53
Changing the display ......................53
Repeating individual tracks or
whole CDs (REPEAT)......................53
Random track play (MIX).................54
Scanning all tracks on all CDs
Adjusting the level display...............58
Setting the display illumination
colour ..........................................58
External audio sources..................... 60
Switching the AUX input on/off ........60
Technical Data................................. 60
Amplifier ......................................60
Tuner ...........................................60
CD...............................................60
Pre-amp out..................................60
Input sensitivity.............................60
(SCAN) ........................................54
Interrupting playback (PAUSE).........54
Clock time....................................... 55
Displaying the time ........................55
Setting the time.............................55
Selecting 12/24-hour clock mode....55
Displaying the time continuously
when the device is off and the
ignition is on .................................55
Briefly displaying time with
switched-off device........................55
Sound ............................................. 56
Adjusting the bass .........................56
Adjusting the treble........................56
Setting the left/right volume
distribution (balance).....................56
Adjusting the front/rear volume
distribution (fader) ........................56
Amplifier/Sub-Out ........................... 57
X-BASS ........................................... 57
Adjusting the X-BASS boost.............57
Equalizer presettings (Presets) ........ 58
34
Notes and accessories
Notes and accessories
Road safety
Roadsafetyhasabsolutepriority.
Thank you for choosing a Blaupunkt prod-
uct. Wehopeyouenjoyusingthisnewpiece
of equipment.
Only operate your car sound system
if the road and traffic conditions al-
low you to do so.
Please read these operating instructions
before using the equipment for the first
time.
Familiarise yourself with the device
before setting off on your journey.
The Blaupunkt editors are constantly work-
ing on making the operating instructions
clearer and easier to understand. However,
if you still have any questions on how to op-
eratethedevice, pleasecontactyourdealer
or the telephone hotline for your country.
You will find the telephone number printed
at the back of this booklet.
You should always be able to hear po-
lice, fire and ambulance sirens in good
time from inside your vehicle.
For this reason, listen to your car
sound system at a suitable volume
level during your journey.
Installation
We provide a manufacturer guarantee for
our products bought within the European
Union. You can view the guarantee condi-
directly at:
If you want to install your car sound system
yourself, please read the installation and
connection instructions that follow these
operating instructions.
Blaupunkt GmbH
Hotline
Robert Bosch Str. 200
Optional equipment
(not part of the scope of delivery)
Use only accessories approved by
Blaupunkt.
D-31139 Hildesheim, Germany
Remote control
Disposal of old unit
The steering wheel and/or handheld re-
mote control allows you to access the most
important functions of your car sound sys-
tem safely and conveniently.
(EU countries only)
Do not dispose of your old device in
the household trash!
Use the return and collection systems avail-
able to dispose of the old device.
You cannot switch the device on/off using
the remote control.
YoucanfindoutfromyourBlaupunktdealer
which remote controls can be used with
your car sound system.
35
Notes and accessories
Amplifier
You can use all Blaupunkt and Velocity am-
plifiers.
Control panel
Detachable control panel
Theft protection
The device is equipped with a detachable
control panel (flip-release panel) as a way
of protecting your equipment against theft.
The device is worthless to a thief without
this control panel.
CD changers
You can connect the following Blaupunkt
CD changers:
CDC A 03, CDC A 08 and IDC A 09.
Protect your device against theft by taking
the control panel with you whenever you
leave your vehicle. Do not leave the control
panel inside your vehicle - not even in a hid-
ing place.
Notes:
• Never drop the control panel.
• Never expose the control panel to di-
rect sunlight or other heat sources.
• Avoid direct skin contact with the
control panel’s electrical contacts. If
necessary, please clean the contacts
with a lint-free cloth moistened with
cleaning alcohol.
36
Control panel
Detaching the control panel
Press the button 2.
The control panel opens out towards you.
2.
Hold the control panel by its right side
and then pull the control panel straight
out of the bracket.
1.
If the device was still switched on when you
detached the control panel, it will automati-
cally switch on with the last setting activat-
ed (radio, CD, CD changer or AUX) when
the panel is replaced.
Switch-off time (OFF TIMER)
After opening the control panel, the device
is switched off after an adjustable time. You
can set this time from 0 to 30 seconds.
Notes:
• The device is switched off after a
time preset by you. For instructions,
please read the section "Switch-off
time (OFF TIMER)" in this chapter.
Press the MENU button 9.
Pressthe or button:repeatedly
• All the current settings are saved.
until the displays shows "OFF TIMER".
• Any CD already inserted in the device
remains there.
Adjust the time with the
buttons
:.
Whenyouhavefinishedmakingyourchang-
es,
Attaching the control panel
Holdthecontrolpanelapproximatelyat
press the MENU button twice 9.
a right angle to the device.
Note:
Slide the control panel into the de-
vice’s guides that are positioned on the
left and right at the lower edge of the
housing. Push the control panel care-
fully into the bracket until it clicks into
place.
If you set the switch-off time to 0 sec-
onds, the device is switched off imme-
diately after opening the control panel.
Carefully flip up the control panel until
it clicks into place.
37
Switching on/off
Volume
Switching on/off
Adjusting the volume
There are various ways of switching the de- You can adjust the volume in increments
vice on/off:
from 0 (off) to 66 (maximum).
To increase the volume,
Switching on/off using button 1
turn the volume control 3 clockwise.
To decrease the volume,
To switch on the device, press button
1.
turn the volume control 3 counter-
The device switches on.
clockwise.
To switch off the device, press and
hold down button 1 for longer than
two seconds.
Setting the power-on volume
Note:
The device switches off.
The device features a time-out function
(time window).
Switching on/off using the vehicle
ignition
For example, if you press the MENU
button 9 and select a menu item,
the device switches back after approx.
8 seconds after the last button acti-
vation. The settings performed are
saved.
The device will switch on/off simultane-
ously with the ignition if the device is cor-
rectly connected to the vehicle’s ignition as
shown in the installation instructions and
you did not switch the device off by press-
ing button 1.
You can set the power-on volume.
Press the MENU button 9.
Switching the device on/off using the
detachable control panel
Detach the control panel.
The devices switches off after the time set
in the "OFF TIMER" menu.
Press the or button : repeat-
edly until "ON VOLUME" appears on the
display.
Adjust the power-on volume with the
buttons :.
Attach the control panel again.
To help you adjust the setting more easily,
the device will increase or decrease the vol-
ume as you make your changes.
The device switches on. The last setting
(radio, CD, CD changer or AUX) is reacti-
vated.
If you enable "LAST VOL", the volume which
was set the last time you switched off the
device is re-enabled.
Note:
To protect the vehicle battery, the de-
vice will switch off automatically after
one hour if the ignition is off.
38
Volume
Whenyouhavefinishedmakingyourchang-
es,
Note:
To protect your hearing, the power-on
volume is limited to the value "38". If
the volume before switching off was
higher and the "LAST VOL" setting was
selected, the device switches on again
with the value "38".
press the MENU button twice 9.
Muting during telephone mode
If your device is connected to a cell phone,
the car sound system is muted when you
"pick up" the phone. For this purpose, the
cell phone must be connected to the de-
vice as described in the installation instruc-
tions.
Whenyouhavefinishedmakingyourchang-
es,
press the MENU button twice 9.
Quickly reducing the volume
(Mute)
You can quickly reduce the volume to a pre-
set level (Mute).
The display shows "PHONE".
Switching the confirmation beep
on/off
The system will output a confirmation beep
for some functions if you keep a button
pressed down for longer than two seconds,
for instance, when assigning a radio station
to a station preset button. You can switch
the beep on or off.
Briefly press button 1.
"MUTE" appears on the display.
Cancelling mute
To return to your previously set volume
level,
Press the MENU button 9.
briefly press button 1 again.
Pressthe or button:repeatedly
until"BEEPON"or"BEEPOFF"appears
on the display.
Adjusting the mute level
You can adjust the mute level.
Switch the BEEP ON or OFF with the
Press the MENU button 9.
or button :.
Press the or button : repeat-
edly until "MUTE LVL" appears on the
display.
Whenyouhavefinishedmakingyourchang-
es,
press the MENU button 9.
Adjust the mute level with the
but-
tons :.
39
Radio mode
To save the setting,
Radio mode
switch the device off and on again or
wait approx. 8 seconds. The radio
starts playing with the last setting se-
lected (radio, CD, CD changer or AUX).
This device is equipped with an RDS radio
receiver. ManyofthereceivableFMstations
broadcast a signal that not only carries the
programme but also additional information
such as the station name and programme
type (PTY).
Switching to radio mode
If you are in CD, CD changer or AUX mode,
press the BND•TS button 6
or
The station name appears on the display as
soon as the tuner receives it.
Adjusting the tuner
press the SOURCE button 4 repeat-
edlyuntilthememorybank,e.g."FM1",
appears on the display.
To ensure proper functioning of the tuner,
the device must be set for the region in
which it is being operated. You can select
among Europe (EUROPE), America (USA),
South America (S-AMERICA), and Thailand
(THAI). The tuner is factory-set to the re-
gion in which it was sold. If you experience
problems with your radio reception, please
check this setting.
Convenient RDS functions
(AF, REG)
The convenient RDS functions AF
(Alternative Frequency) and REGIONAL
extend your radio’s range of functions.
•
AF: If the RDS function is activated, the
radio automatically tunes into the best
receivable frequency for the station
that is currently set.
The radio functions described in these op-
erating instructions refer to the tuner set-
ting EUROPE.
Switch off the device by pressing but-
•
REGIONAL: At certain times, some ra-
dio stations divide their programme
into regional programmes providing
different content. You can use the REG
function to prevent the car radio from
switching to alternative frequencies
that are transmitting different pro-
gramme content.
ton 1.
Holdthebuttons1 and5 ;pressedat
the same time and switch on the device
again with the button 1.
"TUNER" is displayed.
Select your tuner region with the or
button :.
Note:
REGIONAL must be activated/deacti-
vated separately in the menu.
40
Radio mode
Switching REGIONAL on/off
Press the MENU button 9.
Tuning into a station
There are various ways of tuning into a sta-
Press the or button : repeated- tion.
ly until "REG" appears on the display.
"OFF" or "ON" is displayed alongside
"REG".
Automatic station seek tuning
Press the or button :.
To switch REGIONAL on/off,
The radio tunes into the next receivable sta-
tion.
press the or button :.
Press the MENU button 9.
Tuning into stations manually
You can also tune into stations manually.
Switching the RDS function on/off
To switch the RDS functions AF and
REGIONAL on or off,
Note:
You can only tune into stations manu-
ally if the convenient RDS function is
deactivated.
pressandholddowntheTRA•RDS but-
ton 7 for longer than two seconds.
The RDS functions are active when RDS
lights up in the display.
To change the set frequency in small incre-
ments,
briefly press the or button :.
To change the set frequency quickly,
Selecting the waveband/memory
bank
Thisdevicecanreceive programmes broad-
cast over the FM frequency range as well as
the MW and LW (AM) wavebands. There are
three memory banks available for the FM
waveband (FM1, FM2 and FMT) and one
for each of the MW and LW wavebands.
press and hold down the or button
: for a longer period of time.
Six stations can be stored in each memory
bank.
To switch between the FM memory banks
(FM1, FM2 and FMT) and the MW and LW
wavebands,
briefly press the BND•TS button 6.
41
Radio mode
Whenyouhavefinishedmakingyourchang-
es,
Browsing through broadcasting
networks (FM only)
If a radio station provides several pro-
grammes, you have the option of browsing
throughitsso-called"broadcastingnetwork".
press the MENU button 9.
Note:
You can set different sensitivity levels
for FM and MW or LW (AM).
Note:
The convenient RDS function must be
activated before you can use this fea-
ture.
Storing stations
Press the or button : to change
to the next station of the broadcasting
network.
Storing stations manually
Select the desired memory bank (FM1,
FM2, FMT) or one of the wavebands
(MW or LW).
Note:
Tune into the desired station.
When using this feature, you will only
be able to switch to stations that you
have received once before already. To
receive the stations, use the Scan or
Travelstore function.
Press and hold down one of the station
buttons 1 - 6 for longer than two sec-
onds to assign the station to that but-
ton.
Setting the sensitivity of station
seek tuning
You can choose whether the radio should
only tune into stations providing good re-
ception or whether it can also tune into
those with a weak reception.
Storing stations automatically
(Travelstore)
You can automatically store the six stations
offering the strongest reception in the re-
gion (FM only). The stations are stored in
the FMT memory bank.
Press the MENU button 9.
Note:
Pressthe or button:repeatedly
Any stations that were previously
stored in this memory bank are deleted
in the process.
until "SENS" appears on the display.
Thedisplayshowsthecurrentlysetsensitiv-
ity level. "SENS HI3" means that the tuner is
set to the highest sensitivity setting. "SENS
LO1" means it is set to the lowest sensitiv-
ity setting.
Press and hold down the BND•TS but-
ton 6 for longer than two seconds.
Thestoringprocedurebegins."FMTSTORE"
appears on the display. After the process
has completed, the radio will play the sta-
tion that is stored in memory location 1 of
the FMT memory bank.
Set the desired sensitivity level using
the or button :.
42
Radio mode
Whenyouhavefinishedmakingyourchang-
es,
Listening to stored stations
Select the memory bank or waveband.
press the MENU button twice 9.
Press one of the station buttons 1 - 6
;.
Note:
The stored station is played if it can be re-
ceived.
The defined scanning time is also ap-
plied by the system to scanning carried
out in CD and CD changer mode.
Scanning receivable stations
(SCAN)
You can use the scan function to play all the
receivable stations briefly. You can set the
scanning time in the menu to between 5
and 30 seconds.
Programme type (PTY)
Besides transmitting the station name,
some FM stations also provide informa-
tion on the type of programme that they are
broadcasting. Your car radio can receive
and display this information.
Starting SCAN
For example, the programme types can be:
Press and hold down the MENU button
CULTURE
SPORT
ROCK
TRAVEL
JAZZ
POP
9 for longer than two seconds.
SERVICE
Scanning begins.
KNOWLEDGE KIDS
"SCAN" appears briefly in the display fol-
lowed by a flashing display of the current
station name or frequency.
You can use the PTY function to select sta-
tions of a particular programme type.
PTY-EON
Cancelling the SCAN and continuing to
listen to a station
Press the MENU button 9.
Scanning stops and the radio continues
playing the station that it tuned into last.
If you specify the programme type and start
seek tuning, the radio will switch from the
current station to a station of the selected
programme type.
Notes:
Setting the scanning time
• If the tuner does not find a station
that corresponds to the selected pro-
gramme type, you will hear a beep
and "NO PTY" appears briefly in the
display. The radio will then retune to
the station that it received last.
Press the MENU button 9.
Press the or button : repeat-
edly until "SCAN TIME" appears on the
display.
Set the desired scan time using the
or button :.
43
Radio mode
• If the tuned radio station or another Whenyouhavefinishedmakingyourchang-
station on the broadcasting network es,
broadcasts your selected programme
press the MENU button twice 9.
type at a later point in time, the radio
willautomaticallyswitchfromthecur-
rently tuned station or from CD mode
or CD-changer mode to the station
whose programme type matches the
one you selected.
Selecting a programme type and
starting seek tuning
Press the or button :.
The current programme type appears on
the display.
• If you do not want this PTY EON
switching, disable it in the menu
with "PTY OFF". First, press one of
the SOURCE 4 or BND•TS buttons
6.
If you want to select another pro-
gramme type, you can do so by press-
ing the or button : while this dis-
play is visible.
Or
Switching PTY on/off
Press the MENU button 9.
Press the or : repeatedly until
"PTY" appears on the display with the
current setting.
Press one of the buttons 1- 6 ; to se-
lect a programme type that is assigned
to one of these buttons.
The selected programme type appears
briefly on the display.
Press the or button : to switch
Press the or button : to start
PTY ON or OFF.
seek tuning.
Press the MENU button 9.
Theradio will thentuneinto the next station
thatitfindsthatcorrespondstoyourselect-
ed programme type.
Selecting the PTY language
You can select the language for the display
of the programme types. Options include
DEUTSCH, ENGLISH and FRANÇAIS.
Assigning a programme type to a station
button
Selectaprogrammetypeusingthe or
Press the MENU button 9.
button :.
Press the or button : repeat-
edly until "PTY LANG" appears on the
display.
Press and hold the desired station but-
ton 1 - 6 ; for longer than two sec-
onds.
Set the desired language with the or
The programme type is stored on the se-
lected button 1- 6 ;.
button :.
44
Radio mode
Traffic information
Optimising radio reception
Traffic information
Your device is equipped with an RDS-EON
receiver. EON (Enhanced Other Network)
ensures that whenever a traffic announce-
ment (TA) is broadcast, the system switch-
es automatically from a station that does
not provide traffic reports to the appropri-
ate traffic information station within the
broadcasting network that does.
Treble reduction feature during
interference (High Cut)
TheHighCutfunctionresultsinanimproved
reception in case of weak radio reception
(FM only). If reception interferences are
present, the interference level is automati-
cally reduced.
Once the traffic report has been played, the
system will switch back to the programme
that you were listening to before.
Switching High Cut on/off
Press the MENU button 9.
Pressthe or button:repeatedly
until "HICUT" appears on the display.
Switching traffic information
priority on/off
Press the TRA•RDS button 7.
Thepriorityfortrafficannouncementsisac-
tivated if the display shows the traffic jam
symbol.
Press the or button : to switch
High Cut on (1) or off (0).
"HICUT 0" means no automatic reduction of
the interference level, "HICUT 1" means au-
tomatic reduction of the interference level.
Press the MENU button 9.
Notes:
You will hear a warning beep
Configuring the display
• if you leave the reception area of a
traffic information station that you
are currently listening to.
In radio mode, you have the option of dis-
playing the waveband with memory bank
and the time or station name or frequency
of the current station.
• if you leave the reception area of a
traffic information station that the
system is tuned into while listening to
a CD or a CD in the changer, and the
subsequent automatic search cannot
find a new traffic information station.
To switch the display, press and hold
down the DISPL button 8 for long-
er than two seconds.
• if you retune the radio from a traffic
information station to a station that
does not broadcast traffic informa-
tion.
If you hear the warning beep, you can ei-
ther switch off traffic information priority
or tune into a station that broadcasts traffic
information.
45
Traffic information
CD mode
Setting the volume for traffic
announcements
Press the MENU button 9.
Press the or button : repeat-
edly until "TA VOLUME" appears on the
display.
CD mode
You can use this device to play standard au-
dio CDs, CD-Rs and CD-RWs with a diame-
ter of 12 cm. To avoid problems when play-
ing self-burned CDs, you should not burn
CDs at speeds greater than 16-speed.
Set the volume using the or button
Risk of severe damage
to the CD drive!
CD singles with a diameter of 8 cm and
noncircular contoured CDs (shape CDs)
must not be used.
:.
To help you adjust the setting more easily,
the device will increase or decrease the vol-
ume as you make your changes.
Whenyouhavefinishedmakingyourchang-
es,
Weacceptnoresponsibilityforanydam-
age to the CD drive that may occur as a
result of the use of unsuitable CDs.
press the MENU button twice 9.
Notes:
To ensure proper functioning, use only CDs
with the Compact-Disc logo. Copy-pro-
tected CDs can cause playback problems.
Blaupunkt cannot guarantee the proper
functioning of copy-protected CDs!
• Using the volume control 3, you can
also adjust the volume during a traf-
fic announcement for the duration of
that announcement.
• You can adjust the sound settings
and volume distribution settings for
traffic announcements. For further
information, please read the "Sound"
chapter.
BesidesbeingabletoplayaudioCDsonthis
device, you can also play CDs containing
MP3/WMA music files. For further informa-
tion,pleasereadthechapterentitled"MP3/
WMA mode".
Switching to CD mode
If there is no CD inserted in the drive,
press the button 2.
The control panel opens.
Gently insert the CD with its printed
side uppermost into the drive until you
feel some resistance.
46
CD mode
The drive draws in the CD automatically.
Fast searching (audible)
To fast search backwards or forwards,
You must not hinder or assist the drive as it
draws in the CD.
press and hold down the or button
: untilfastsearchingbackwards/for-
wards begins.
Gently close the control panel whilst
exerting a little pressure until you feel
it click into place.
Random track play (MIX)
The CD starts playing.
Press the 5 MIX button ;.
Note:
"MIX CD" appears briefly on the display and
the MIX symbol is displayed. The next ran-
domly selected track will then be played.
If the vehicle ignition was switched
off prior to inserting the CD, you must
switch the device on first with the but-
ton 1 to start the playback.
Cancelling MIX
Press the 5 MIX button ; again.
"MIX OFF" appears briefly on the display
and the MIX symbol disappears.
If a CD is already inserted in the drive,
press the SOURCE button 4 repeat-
edly until "CD" appears on the display.
Playback begins from the point at which it
was last interrupted.
Scanning tracks (SCAN)
You can scan (briefly play) all the tracks on
the CD.
Selecting tracks
Press one of the arrow buttons : to
Press the MENU button 9 for longer
select the next or previous track.
than two seconds.
If you press the or button : once, the
player will play the current track again from
the beginning.
The next track will then be scanned.
Note:
You can set the scanning time. For
further information, please read the
section entitled "Setting the scanning
time" in the "Radio mode" chapter.
Fast track selection
To quickly select tracks backwards or for-
wards,
press and hold down the
or
Cancelling Scan and continuing listening
to a track
To end the scanning process,
button : until fast track selection
backwards / forwards begins.
press the MENU button 9.
The currently scanned track will then con-
tinue to be played normally.
47
CD mode
Repeating tracks (REPEAT)
If you want to repeat a track,
Traffic announcements in CD
mode
Ifyouwishtoreceivetrafficannouncements
in CD mode,
press the 4 RPT button ;.
"RPT TRCK" appears briefly on the display
and the RPT symbol is displayed. The track
is repeated continuously until you deacti-
vate RPT.
press the TRA•RDS button 7.
Thepriorityfortrafficannouncementsisac-
tivated if the display shows the traffic jam
symbol. For further details, please read the
chapter entitled "Traffic information".
Cancelling repeat
If you want to cancel the repeat function,
Ejecting a CD
press the 4 RPT button ; again.
Press the button 2.
The control panel opens out towards you.
"RPT OFF" appears briefly on the display
and the RPT symbol disappears. Normal
playback is then resumed.
Press theejectbutton < next tothe
CD tray.
Interrupting playback (PAUSE)
Press the 3 button ;.
"PAUSE" appears on the display.
The CD is ejected.
Remove the CD and close the control
panel.
Cancelling pause
Notes:
During the pause, press the button
• If a CD is ejected, the drive will auto-
matically draw it back in again after
10 seconds.
3
;.
Playback is continued.
• You can also eject CDs whilst the de-
vice is switched off or whilst another
audio source is activated.
Configuring the display
You can select from two display types for
CD mode:
•
•
Track number and time
Track number and playing time
To switch the display, press and hold
down the DISPL button 8 for long-
er than two seconds.
48
MP3/WMA mode
This device supports as many subdirecto-
ries as your burner software can create de-
spite the fact that the maximum directory
depth defined by the ISO 9660 standard
is only 8.
MP3/WMA mode
You can also use this car sound system to
play CD-Rs and CD-RWs that contain MP3
music files. You can also play WMA files.
The operation for playing MP3 and WMA
files is identical.
D01
Notes:
• WMA files with Digital Rights
Management (DRM) from online mu-
sic shops cannot be played with this
device.
A
D02
D03
D04
• WMAfilescanonlybeplayedbacksafe-
ly if they were created with Windows
Media-Player version 8.
T001
T001
T002
T003
T004
T005
T002
T003
T004
T005
T006
T007
T008
T009
T010
T011
Preparing an MP3 CD
B
The various combinations of CD burners,
CD burning software and CD blanks may
lead to problems arising with the device’s
ability to play certain CDs. If problems oc-
cur with your own burned CDs, you should
try another brand of CD blank or choose an-
other colour of CD blank.
T001
T002
T003
T004
T005
T006
A Directories
B Title · Files
The format of the CD must be ISO 9660
Level1/Level2orJoliet. Otherformatscan-
not be played reliably.
You can name each directory using a PC.
The device is capable of displaying the di-
rectory name. Name the directories and
tracks/files using your CD burner software.
The software’s instruction manual will pro-
vide details on how to do this.
You can create a maximum of 252 directo-
ries on a CD. You can use this device to ac-
cess directories individually.
Regardless of the number of directories
on the CD, the device can handle up to
999 MP3 files on a single CD, with a maxi-
mum of 255 files in one directory.
Note:
When naming directories and tracks/
files you should avoid using accents
and special characters.
49
MP3/WMA mode
If you like your files to be in the correct or-
der, you should use burner software that
places files in alphanumerical order. If your
software does not provide this feature you
also have the option of sorting the files
manually. For this purpose, you must en-
ter a number in front of each file name, e.g.
"001", "002", etc. The leading zeros must
also be entered.
Switching to MP3 mode
MP3 mode is activated in the same way as
normal CD mode. For further information,
please read the section entitled "Switching
to CD mode" in the "CD mode" chapter.
Configuring the display
Configuring the default display
You can display various types of informa-
tion on the current track:
MP3 tracks can contain additional infor-
mation such as the artist, album and track
names (ID3 tags). This device can display
ID3 tags (version 1).
•
•
•
•
•
Directory number and track number
Directory number and time
When creating (encoding) MP3 files from
audio files, you should use bit rates up to a
maximum of 256 Kbit/sec.
Directory number and playing time
Track number and playing time
Track number and time
This device can only play MP3 files that
have the ".MP3" file extension.
To switch between the different display op-
tions,
Notes:
press and hold down the DISPL but-
ton 8 for longer than two seconds, to
switch the display.
To ensure uninterrupted playback,
• do not try changing the file extension
to ".MP3" of any files other than MP3
files and then attempt to play them!
The device will ignore these invalid
files during playback.
Note:
After the MP3 scrolling text was
scrolled once after a track change, the
information is permanently shown on
the display.
• Do not use "mixed" CDs containing
both non-MP3 data and MP3 tracks
(the device only reads MP3 files dur-
ing MP3 playback).
• Do not use mix-mode CDs contain-
ing both CD-audio tracks and MP3
tracks. If you try playing a mix-mode
CD, the device will only play the CD-
audio tracks.
50
MP3/WMA mode
Configuring the MP3 scrolling
texts
Selecting a directory
To move up or down to another directory,
One of the following scrolling texts is
shown once on the display with every track
change. Afterwards, the configured stand-
ard display is shown.
press the or button : once or
several times.
Selecting Tracks/Files
To move up or down to another track/file in
the current directory,
The available scrolling texts are:
•
•
•
•
•
Directory name ("DIR NAME")
Name of the track ("SONG NAME")
Name of the album ("ALBM NAME")
Name of the artist ("ARTIST")
File name ("FILE NAME")
press the or button : once or
several times.
If you press the button : once, the cur-
rent track is played again from the begin-
ning.
Note:
Fast search
To fast search backwards or forwards,
Artist, track and album name are part
of the MP3-ID tag of version 1 and can
only be displayed if they have been
saved with the MP3 files (for further in-
formation, please read the instructions
that came with your PC’s MP3 software
or burner software).
press and hold down the or button
: untilfastsearchingbackwards/for-
wards begins.
Random track play – MIX
To play the tracks in the current directory in
random order,
To switch between the different display op-
tions,
press the MENU button 9.
briefly press the 5 MIX button ;.
Press the or button : repeat-
edly until "MP3 DISP" appears on the
display.
"MIX DIR" appears on the display and the
MIX symbol is displayed.
To play the tracks contained in all the direc-
tories on the inserted MP3-CD in random
order,
Select the desired MP3 scrolling text
with the or button :.
Whenyouhavefinishedmakingyourchang-
es,
press the 5 MIX button ; for longer
than two seconds.
press the MENU button twice 9.
"MIX CD" appears on the display and the
MIX symbol is displayed.
Note:
The "MP3 DISP" menu item is available
only during the playback of a CD with
MP3/WMA files.
51
MP3/WMA mode
Cancelling MIX
To cancel MIX,
Repeated playback of individual
tracks or entire directories –
REPEAT
briefly press the 5 MIX button ;.
"MIX OFF" appears on the display and the
MIX symbol disappears.
To play the current track repeatedly,
briefly press the 4 RPT button ;.
"RPT TRCK" and RPT appear briefly on the
display.
Scanning tracks – SCAN
You can scan (briefly play) all the tracks on
the CD.
To repeat the whole directory,
press the 4 RPT button ; for longer
Press the MENU button 9 for longer
than two seconds. The next track will
then be scanned.
than two seconds.
"RPT DIR" appears briefly on the display.
"TRK SCAN" briefly appears on the display.
The title number flashes. The titles are
scanned in ascending order.
Cancelling repeat
To stop the current track or current direc-
tory from being repeated,
Note:
briefly press the 4 RPT button ;.
You can set the scanning time. For fur-
ther information on setting the scan-
ning time, please read the section en-
titled "Setting the scanning time" in the
"Radio mode" chapter.
"RPT OFF" appears briefly on the display
and RPT disappears.
Interrupting playback (PAUSE)
Press the 3 button ;.
"PAUSE" appears on the display.
Cancelling Scan and continuing listening
to a track
Briefly press the MENU button 9.
The currently scanned track will then con-
tinue to be played normally.
Cancelling pause
During the pause, press the button
3
;.
Playback is continued.
52
CD-changer mode
Changing the display
Five options are available for the display in
CD changer mode:
CD-changer mode
Note:
Information on handling CDs, inserting
CDs and operating the CD changer can
be found in the operating instructions
supplied with your CD changer.
•
•
•
•
•
Track number and playing time
Track number and time
CD number and track number
CD number and time
Switching to CD-changer mode
Press the SOURCE button 4 repeat-
edly until "CHANGER" appears on the
display.
CD number and playing time
To switch between the display options,
press and hold down the DISPL but-
ton 8 for longer than two seconds.
The device starts playing the first CD that
the CD changer detects.
Repeating individual tracks or
whole CDs (REPEAT)
To repeat the current track,
Selecting CDs
To move up or down to another CD,
briefly press the 4 RPT button ;.
"RPT TRCK" appears briefly and RPT lights
up on the display.
press the or button : once or
several times.
Note:
To repeat the current CD,
Thedevicewillignore empty CD slots in
thechangerandslotscontaininginvalid
CDs.
press and hold down the 4 RPT button
; for longer than two seconds.
"RPT DISC" appears briefly and RPT lights
up on the display.
Selecting tracks
To move up or down to another track on the
current CD,
Cancelling repeat
To stop the current track or current CD from
being repeated,
press the or button : once or
several times.
briefly press the 4 RPT button ;.
"RPT OFF" appears and RPT disappears on
the display.
Fast searching (audible)
To fast search backwards or forwards,
press and hold down the or button
:untilfastsearchingbackwards/for-
wards begins.
53
CD-changer mode
Note:
Random track play (MIX)
You can set the scanning time. For
further information, please read the
section entitled "Setting the scanning
time" in the "Radio mode" chapter.
To play the tracks on the current CD in ran-
dom order,
briefly press the 5 MIX button ;.
"MIX CD" appears briefly and MIX lights up
on the display.
Interrupting playback (PAUSE)
Press the 3 button ;.
"PAUSE" appears on the display.
To play the tracks on all inserted CDs in ran-
dom order,
press and hold down the 5 MIX button
; for longer than two seconds.
Cancelling pause
"MIX ALL" appears briefly and MIX lights up
on the display.
During the pause, press the button
3
;.
Playback is continued.
Cancelling MIX
Briefly press the 5 MIX button ;.
"MIX OFF" appears and MIX on the display
disappears.
Scanning all tracks on all CDs
(SCAN)
To scan (briefly play) all the tracks on all the
inserted CDs in ascending order,
press the MENU button 9 for longer
than two seconds.
"TRK SCAN" appears on the display and the
number of the current track flashes.
Stopping Scan
To stop scanning,
briefly press the MENU button 9.
The currently played track will then contin-
ue to be played normally.
54
Clock time
Press the or button : to switch
Clock time
between modes.
Whenyouhavefinishedmakingyourchang-
es,
Displaying the time
To briefly display the time,
press the MENU button 9.
briefly press the DISPL button 8.
The time appears on the display for several
seconds.
Displaying the time continuously
when the device is off and the
ignition is on
To display the time when the device is off
and the vehicle ignition is on,
Setting the time
To set the time,
press the MENU button 9.
press the MENU button 9.
Press the or button : repeat-
edly until "CLOCK SET" appears on the
display.
Pressthe or button:repeatedly
until "CLOCK OFF" or "CLOCK ON" ap-
pears on the display.
Press the button :.
The time appears on the display. The hours
flash and can be adjusted.
Press the or button : to switch
the display between ON and OFF.
Whenyouhavefinishedmakingyourchang-
es,
Set the hours with the or button
:.
press the MENU button 9.
Once the hours are set,
press the button :.
The minutes flash.
Briefly displaying time with
switched-off device
To briefly display the time when the device
is switched off,
Set the minutes with the or but-
ton :.
Whenyouhavefinishedmakingyourchang-
es,
press the DISPL button 8.
The time appears on the display for approx.
8 seconds.
press the MENU button twice 9.
Selecting 12/24-hour clock
mode
Press the MENU button 9.
Press the or button : repeated-
ly until "24 HOUR MODE" or "12 HOUR
MODE" appears on the display.
55
Sound
Setting the left/right volume
distribution (balance)
Sound
You can adjust the sound settings (bass and
treble) separately for each source (radio, To adjust the left/right volume distribution
CD, CD changer or AUX).
(balance),
The volume distribution settings (balance press the AUDIO button 5.
and fader) apply to all the audio sources
(except for traffic announcements).
"BASS" appears on the display.
Press the or button : repeatedly
Fader and balance can be adjusted for traf-
fic announcements (TA) only during a traf-
fic announcement.
until "BAL" appears on the display with
the current setting.
Press the or button : to adjust
the balance (right/left).
Adjusting the bass
Press the AUDIO button 5.
"BASS" appears on the display.
Press the AUDIO button 5 to exit the
menu.
Press the or button : to adjust Adjusting the front/rear volume
the bass.
distribution (fader)
To adjust the front/rear volume distribution
(fader),
Whenyouhavefinishedmakingyourchang-
es,
press the AUDIO button 5.
press the AUDIO button 5.
"BASS" appears on the display.
Adjusting the treble
Press the AUDIO button 5.
"BASS" appears on the display.
Press the or button : repeatedly
until "Fader" appears on the display
with the current setting.
Press the button : repeatedly until
Press the or button : to adjust
"TREBLE" appears on the display.
the volume distribution front/rear.
Press the or button : to adjust
Press the AUDIO button 5 to exit the
the treble.
menu.
Whenyouhavefinishedmakingyourchang-
es,
press the AUDIO button 5.
56
Amplifier/Sub-Out
X-Bass
Amplifier/Sub-Out
X-BASS
The car sound system provides connec- X-Bass allows you to increase the bass at
tions that allow you to connect external low volume.
amplifiers. In addition, you can connect an
The selected X-Bass setting is effective for
amplifier to the integrated low-pass filter
all audio sources (radio, CD, CD changer or
of the device to operate a subwoofer. For
AUX).
this purpose, the amplifiers must be con-
The X-BASS increase can be set in incre-
nected as described in the installation in-
ments of 1 to 3.
structions.
"XBASS OFF" means that the X-BASS func-
tion is switched off.
Adjusting the X-BASS boost
Press the AUDIO button 5.
"BASS" appears on the display.
Press the or button : repeatedly
until "XBASS" appears on the display.
Pressthe or button:repeatedly
until the desired setting appears on the
display.
Whenyouhavefinishedmakingyourchang-
es,
press the AUDIO button 5 twice.
57
Equalizer
Display
Equalizer presettings
(Presets)
Adjusting the display
settings
This device features an equalizer in which
the settings for the music genres "ROCK",
"POP" and "CLASSIC" are already pro-
grammed.
Adjusting the level display
The level display on your display briefly
symbolically shows the settings process for
volume and the settings of the sound con-
trol.
To select an equalizer setting,
press the AUDIO button 5.
"BASS" appears on the display.
Aside from the settings processes, the level
display shows the peak value for music or
language. You can switch the level display
on or off.
Press the or button : repeatedly
until "POP", "ROCK", "CLASSIC" or "EQ
OFF" appears on the display.
Press the MENU button 9.
The displays shows "MENU".
Press the or button : repeat-
edly until "PEAK LVL" appears on the
display.
Press the or button : to select
one of the settings or select "EQ OFF"
to switch off the equalizer.
The selected setting is permanently shown
on the display.
Press the or button : to select
Whenyouhavefinishedmakingyourchang-
es,
between "PEAK ON" and "PEAK OFF".
Whenyouhavefinishedmakingyourchang-
es,
press the AUDIO button 5.
press the MENU button twice 9.
Setting the display illumination
colour
For the display illumination, you can mix a
colour from the RG spectrum (red green) or
select a colour during a colour seek.
Mixing a colour for the display
illumination
To customise the display illumination to suit
yourtastesyoucanmixacolouryourselfus-
ing the primary colours red and green.
58
Display
Press the or : repeatedly until To start the seek tuning again,
"DISP COL" appears on the display.
press the or button :.
If you found the desired colour,
press the MENU button twice 9.
Press the or button :.
The menu for mixing your own colour is dis-
played. "R" and "G" are displayed with the
current values. The "R" setting flashes.
Press the or button : repeat-
edly until the desired colour value is
displayed.
Press the or button : to move
the selection mark behind the other
colour.
Adjust the colour components to suit
your preferences.
Whenyouhavefinishedmakingyourchang-
es,
press the MENU button twice 9.
Selecting a display illumination during a
colour scan
Press the MENU button 9.
Press the or button : repeat-
edly until "COL SCAN" appears on the
display.
Press the or button : to start the
colour seek.
The device starts changing the display illu-
mination colour.
If you want to adopt the currently set col-
our,
press the MENU button 9 once.
59
External audio sources
Technical data
External audio sources
Technical Data
If no CD changer is connected to the device,
you can connect an external audio source.
Audio sources can, for example, be port-
able CD players, MiniDisc players or MP3
players.
Amplifier
Output power:
4 x 18 watts sine
at 14.4 V and
1% distortion
factor at
If you want to connect an external audio
source, you will need an adapter cable.
You can obtain this cable (Blaupunkt no.:
7 607 897 093) from your authorised
Blaupunkt dealer.
4 ohms.
4 x 26 watts sine
in accordance with
DIN 45324 at
14.4 V at 4 ohms.
The AUX input must be activated in the
menu.
4 x 50 watts max.
power
Note:
If no CD changer is connected to the
device, the AUX menu item cannot be
selected.
Tuner
Wavebands:
FM
MW
LW
:
:
:
87.5 - 108 MHz
531 - 1 602 kHz
153 - 279 kHz
Switching the AUX input on/off
Press the MENU button 9.
FM frequency response:
35 - 16,000 Hz
Press the or button : repeated-
ly until "AUX OFF" or "AUX ON" appears
on the display.
CD
Frequency response:
Use the
buttons : to select be-
20 - 20,000 Hz
2 V
tween the options "AUX ON" and "AUX
OFF".
Pre-amp out
4 channels:
When you have finished making your chang-
es,
press the MENU button 9.
Input sensitivity
AUX input:
Tel./Navi input:
2 V / 6 kΩ
10 V / 1 kΩ
Note:
If the AUX input is switched on, you can
select it by pressing the SOURCE but-
ton 4.
Weight
1.36 kg
Subject to changes
60
Bitte den ausgefüllten Gerätepass sicher aufbewahren!
Please keep the filled-in radio pass in a safe place!
Prière de conserver soigneusement la carte d’autoradio remplie !
Tenete per favore il libretto di apparecchio, debitamente riempito, in un
posto sicuro!
Bewaar de ingevulde apparaatpas op een veilige plaats!
Vänligen förvara ifyllt apparatpass på säker plats!
¡Favor guardar el documento del aparato debidamente llenado en un lugar
seguro!
Por favor, guardar o cartão preenchido do aparelho num lugar seguro!
Det udfyldte apparatpas opbevares et sikkert sted!
Prosimy przechowywać metrykę radia w bezpiecznym miejscu!
Vyplněný dokument o přístroji prosím bezpečně uschovejte!
Vyplnený dokument o prístroji prosím bezpečne uschovajte!
363
Country:
Phone:
Fax:
WWW:
Germany
Austria
(D)
(A)
(B)
0180-5000225
01-610 39 0
05121-49 4002
01-610 39 391
02-525 5263
44-898 644
Belgium
Denmark
Finland
02-525 5444
(DK) 44 898 360
(FIN) 09-435 991
09-435 99236
01-4010 7320
01-89583 8394
210 94 12 711
01-46 66 706
02-369 62464
40 2085
France
(F)
01-4010 7007
Great Britain
Greece
(GB) 01-89583 8880
(GR) 210 94 27 337
(IRL) 01-46 66 700
Ireland
Italy
(I)
(L)
02-369 62331
40 4078
Luxembourg
Netherlands
Norway
Portugal
Spain
(NL) 0800 400 1010
0800 400 1040
66-817 157
(N)
(P)
(E)
(S)
66-817 000
2185 00144
902 52 77 70
08-7501850
2185 00165
91 410 4078
08-7501810
01-8471650
02-6130 0514
76 511 809
Sweden
Switzerland
Czech. Rep.
Hungary
Poland
(CH) 01-8471644
(CZ) 02-6130 0446
(H)
(PL)
(TR)
76 511 803
0800-118922
0212-335 06 71
022-8771260
0212-346 00 40
708-6817188
Turkey
USA
(USA) 800-950-2528
Brasil
(Mercosur)
Malaysia
(BR) 0800 7045446
+55-19 3745 2773
+604-6413 640
(Asia Pacific) (MAL) +604-6382 474
Gerätepass
Name:
Typ:
.....................................................................
7 646
....................................................................
Serien-Nr:
BP ................................................................
Blaupunkt GmbH, Robert-Bosch-Straße 200, D-31139 Hildesheim
01/06 - CM-AS/SCS1
(dt, gb, fr, it, nl, sw, es, pt, dk, pl, cz, sk)
8622404845
|