Blaupunkt IVMS 5802 User Manual

In Car Video  
IVMS-5802  
IVMS-6502  
Operating and installation instructions  
TABLE OF CONTENTS  
Device overview ..................... 14 Removal ................................. 21  
5.8" and 6.5" TFT-LCD screen ...... 14  
OSD menu ............................. 22  
General information ............... 16  
Important notes ............................. 16  
Safety notices ............................... 16  
Operation ...................................... 22  
IR remote control ................... 23  
Functions ...................................... 23  
Accessories............................ 17  
Accessories supplied .................... 17  
Available accessories .................... 17  
Specifications ........................ 24  
5.8" screen ................................... 24  
6.5" screen ................................... 25  
Fitting ..................................... 17  
Monitor installation......................... 17  
Prepare the working area .............. 17  
Mark out the dimensions................ 17  
Carefully cut open the headrest  
Connection diagram ............ 109  
cover............................................. 18  
Open the headrest and remove  
filling and other items..................... 18  
Lay the cable through the headrest . 19  
Insert the mounting frame in the  
headrest ........................................ 19  
Inserting the monitor...................... 19  
Check and adjust the monitor then  
apply the Velcro strips ................... 20  
Example of a direct connection to a  
DVD player.................................... 20  
Positive connection ....................... 20  
Negative (ground) connection ........ 21  
15  
NOTES  
General information  
Thank you for choosing a Blaupunkt  
product. We hope you enjoy using this  
new piece of equipment.  
To avoid the risk of electrical  
shock, the device must be protected  
from water and moisture, and must  
not be opened. Dangerously high  
voltages are generated inside the  
device.  
Please read these operating instruc-  
tions before using the equipment for  
the first time.  
We wish to point out that the right to  
claim against warranty is invalidated by  
any changes or modifications to the  
device that have not been explicitly ap-  
proved by the manufacturer.  
The Blaupunkt editors are constantly  
working on making the operating in-  
structions clearer and easier to under-  
stand. However, if you still have any  
questions on how to operate the device,  
please contact your dealer or the tele-  
phone hotline for your country. You will  
find the telephone number printed at the  
back of this booklet.  
Long-term operation or storage outside  
the specific temperature range can lead  
to a shortening of the useful life of the  
LC display.  
We provide a manufacturer guarantee  
for our products bought within the Eu-  
ropean Union. You can view the guar-  
antee conditions at www.blaupunkt.de  
or ask for them directly at:  
Safety notices  
Please observe the following safety  
notices during installation and whilst  
making the connections.  
-
Disconnect the negative and positi-  
ve terminals of the battery.  
Blaupunkt GmbH  
Hotline  
Robert Bosch Str. 200  
-
When doing so, please observe the  
safety notices provided by the vehicle  
manufacturer.  
D-31139 Hildesheim  
-
Before drilling the holes necessary  
for mounting the equipment and for  
laying cables, please make sure that  
concealed cables, the fuel tank and  
fuel lines cannot be damaged in the  
process!  
Important notes  
This device is not intended for fitting in  
the forward section of the passenger  
compartment where it could also be  
seen by the driver. Fitting this device in  
any part of the vehicle where it could  
interfere with or distract the driver’s at-  
tention is dangerous and is not permit-  
ted. The manufacturer cannot accept  
responsibility for any damage caused  
as a result of improper fitting of this de-  
vice.  
16  
ACCESSORIES  
Accessories  
FITTING  
Fitting  
Accessories supplied  
- Connecting cable  
- Extraction tool  
- Operating instructions  
- Mounting plate  
Monitor installation  
Note:  
It is recommended that the fitting is car-  
ried out at a specialist workshop.  
Prepare the working area  
- Adapter cable for a direct connection  
to an AV source  
- IR remote control IVRC-06  
Remove the headrest, and place it  
on a working surface that has been  
cleared and cleaned, where the fur-  
ther assembly procedures may be  
carried out.  
Available accessories  
- Monitor bracket 7608009300  
The installation instructions are included  
with the bracket.  
Note:  
Take appropriate action to ensure that  
the headrest is not damaged while fit-  
Note regarding VIDEO IN/AUX:  
Only use original Blaupunkt accessory ting the monitor.  
7 607 001 510.  
Or else use a mono plug.  
Mark out the dimensions  
Feel the covering of the headrest  
carefully to ensure that there are no  
invisible parts that would prevent the  
monitor from being fitted.  
Mark out the surface that needs to be  
cut out - its size must match that of the  
installation frame.  
17  
FITTING  
Open the headrest and remove  
filling and other items  
Carefully lift the covering material  
away from the cut area.  
Adjust the cutting depth of the knife  
to about 2.5 cm, and cut into the he-  
adrest following a line about 0.5 cm  
inside the marked edge.  
Carefully lift the filling material at one  
corner, and cut deeper into the ma-  
terial with the knife.  
Carefully cut open the headrest  
cover  
Use a knife with an adjustable cutting  
depth to cut out the planned area.  
Remove the filling material in small  
pieces.  
As you do this, lift one piece of the  
filling material, and ensure that the  
cut is being made to an even depth.  
Make the first cut inside the marked  
area at a point about 0.5 cm from one  
of the corners, then make a diago-  
nal cut to a point about 0.5 cm from  
the opposite corner.  
To remove other pieces, use a Dremel  
saw or another suitable tool.  
Insert the monitor to check that it will  
fit into the cut area, and make ad-  
justments if necessary.  
Make a similar cut between the oth-  
er two diagonally opposed corners.  
18  
FITTING  
Lay the cable through the  
headrest  
Now pass the supplied cables throu-  
gh the opening so that they emerge  
from the underneath of the headrest.  
If possible, cover the cable with a ca-  
ble tunnel.  
Now connect the power supply,  
ground and video signal cables, to  
check that the monitor is working.  
Inserting the monitor  
Before connecting the monitor, pass  
the connecting cables through the  
holes provided in the mounting pla-  
te, as shown in the illustration.  
Insert the monitor into the mounting  
plate, and attach it with appropriate  
fastenings.  
Insert the mounting frame in the  
headrest  
Before connecting the monitor, pass  
the connecting cables through the  
holes provided in the mounting pla-  
te, as shown in the illustration.  
Monitor  
Mounting plate  
Insert the mounting plate into the  
area that has been cut out, and fix it  
in place with appropriate fastenings.  
19  
FITTING  
Check and adjust the monitor Example of a direct connection to  
then apply the Velcro strips  
a DVD player  
Connect the monitor, place it tempo-  
rarily in the cut-out, and place the  
headrest into position.  
Adapter cable for a  
direct connection to an  
AV source  
Check the various monitor settings  
such as brightness, headphone func-  
tion, volume control and so on.  
DVD - Player (IVDP-01)  
Then attach the Velcro strips to the  
rear of the monitor, and push the fra-  
me onto the headrest.  
Digital AV  
out  
in  
Take care not to press the screen its-  
elf, and apply pressure only in the  
region of the frame.  
Masse/GND  
+12V  
IVMS 5802/6502  
Positive connection  
Connect the fuse holder to protect the  
positive cable (+12 V). The fuse holder  
should be connected to the positive ter-  
minal at a distance of max. 30 cm from  
the vehicle battery (if necessary, drill a  
hole in the bulkhead and use the ap-  
propriate cable grommets).  
20  
FITTING  
REMOVAL  
Negative (ground) connection  
Removal  
Attach the negative cable (earth/GND)  
directly to the vehicle body using a  
screw. Scratch the surface down to the  
bare metal at the point at which the  
ground is made.  
To remove the screen, insert the ex-  
traction tool between the screen and  
the mounting plate.  
Insert the extraction tool at the place  
where a slot has been provided be-  
tween the screen and the mounting  
plate.  
If the installation requires holes to be  
drilled or any other changes to be  
made to the vehicle, please contact  
a specialist workshop in your area.  
Extraction tool  
21  
OSD MENU  
OSD menu  
Operation  
Press the “MENU” button on the dis-  
play or on the remote control to open  
the OSD menu.  
TINT:  
To adjust the picture shade (only  
for NTSC)  
REVOLVE:  
To revolve the screen display  
- LEFT - RIGHT  
Horizontally mirrored  
Use the arrow buttons  
/
to sel-  
ect the options and after you press  
the MENU button you can use the  
- UP - DOWN  
Vertically mirrored  
arrow buttons  
settings.  
/
to change the  
RESET PICTURE:  
To reset the configured parameters  
to the factory default settings.  
Press the “EXIT” option to close the  
OSD menu again.  
EXIT:  
To close the OSD menu  
ZOOM  
BRIGHTNESS  
CONTRAST  
COLOR  
TINT  
REVOLVE LEFT-RIGHT  
UP-DOWN  
RESET PICTURE  
EXIT  
ZOOM (picture size):  
Change the picture height/width  
- FULL  
- NORMAL  
- WIDE  
BRIGHTNESS  
To adjust the brightness  
CONTRAST:  
To adjust the contrast  
COLOR:  
To adjust the colour  
22  
IR REMOTE CONTROL  
IR remote control  
Functions  
The supplied remote control is suitable  
for operating the following monitors:  
IVMS-5802 and IVMS-6502.  
1
2
3
1 POWER  
POWER TV/VIDEO  
MUTE  
On/off button for the monitor.  
4
5
2 TV/VIDEO  
No function.  
3 VOL • arrow button  
Increase the volume for the sel-  
ected monitor.  
VOL  
CH  
VOL • arrow button  
Decrease the volume for the sel-  
ected monitor.  
6
4 MUTE  
MENÜ  
Mute the volume of the loudspea-  
kers inside the monitor.  
5 CH • arrow button  
/
Channel selection if the monitor is  
connected to a signal controller  
IVSC-3302 or IVSC-5502.  
IVRC-06  
Caution:  
The way the CH  
/
buttons  
function depends on the monitor  
selection (which is made using  
the signal controller’s remote con-  
trol).  
6 Menu  
See OSD menu, operation (page  
22).  
23  
SPECIFICATIONS  
Specifications  
5.8" screen  
System:  
NTSC/PAL auto switch  
Power supply / consumption:  
12 V direct current, ± 10%,  
<900 mA  
Standby:  
< 1 mA  
Video input level:  
Audio input level:  
Operating temperature:  
Storage temperature:  
Screen size (diagonal):  
Contrast ratio:  
1 Vpp, 75 ohms  
0 - 0.3 Vrms, 20 Hz - 20 kHz  
-20° C to +60° C  
-30° C to +80° C  
5.8" (14.7 cm)  
60  
Power consumption:  
Brightness:  
< 11 W  
300 cd/m2  
Display technology:  
Resolution (pixels):  
Visible screen area:  
Viewing angle:  
TFT active matrix system  
1200 (H) x 234 (W) = 280,800 pixels  
127.20 (W) x 71.84 (H) mm  
From the left and right: 60°,  
From above: 60°,  
From below: 30°  
Total monitor dimensions:  
Monitor weight:  
165 (W) x 122 (H) x 26.7 (D) mm  
< 400 g  
24  
SPECIFICATIONS  
6.5" screen  
System:  
NTSC/PAL auto switch  
Power supply / consumption:  
12 V direct current, ± 10%,  
<900 mA  
Standby:  
< 1 mA  
Video input level:  
Audio input level:  
Operating temperature:  
Storage temperature:  
Screen size (diagonal):  
Contrast ratio:  
1 Vpp, 75 ohms  
0 - 0.3 Vrms, 20 Hz - 20 kHz  
-20° C to +60° C  
-30° C to +80° C  
6.5" (16.5 cm)  
60  
Power consumption:  
Brightness:  
< 10 W  
280 cd/m2  
Display technology:  
Resolution (pixels):  
Visible screen area:  
Viewing angle:  
TFT active matrix system  
1200 (H) x 234 (W) = 280,800 pixels  
142.80 (W) x 87.70 (H) mm  
From the left and right: 60°,  
From above: 60°,  
From below: 30°  
Total monitor dimensions:  
Monitor weight:  
176.0 (W) x 122 (H) x 26.7 (D) mm  
< 400 g  
Subject to changes!  
25  
Anschlussbild • Connection diagram • Schéma de connexion  
• Schema di allacciamento • Bedradingsschema •  
Anslutningsschema • Cuadro de conexiones • Esquema de  
ligação • Tilslutningsbillede  
I V M S 5 8 0 2  
V i d e o o u t  
u d A i o R o u t  
u d A i o L o u t  
o l l e r I V S C - 3 S 3 i 0 g 2 n a l C o n t r  
109  
Service-Nummern / Service numbers / Numéros du service après-  
vente / Numeri del servizio di assistenza / Servicenummers /  
Telefonnummer för service / Números de servicio / Número de  
serviço / Servicenumre  
Country:  
Phone:  
Fax:  
WWW:  
Germany  
(D)  
0180-5000225  
05121-49 4002  
Austria  
(A)  
(B)  
01-610 390  
02-525 5454  
01-610 393 91  
02-525 5263  
44-898 644  
09-435 99236  
01-4010 7320  
01-89583 8394  
210 57 69 473  
01-4598830  
02-369 6464  
40 2085  
023-565 6331  
66-817 157  
01-2185 11111  
916-467952  
08-7501810  
01-8471650  
Belgium  
Denmark  
Finland  
France  
(DK) 44 898 360  
(FIN) 09-435 991  
(F)  
01-4010 7007  
Great Britain (GB) 01-89583 8880  
Greece  
Ireland  
Italy  
Luxembourg (L)  
Netherlands (NL)  
Norway  
Portugal  
Spain  
(GR) 210 57 85 350  
(IRL) 01-4149400  
(I)  
02-369 6331  
40 4078  
023-565 6348  
66-817 000  
01-2185 00144  
902-120234  
08-7501500  
(N)  
(P)  
(E)  
(S)  
Sweden  
Switzerland (CH) 01-8471644  
Czech. Rep. (CZ)  
02-6130 0441  
01-333 9575  
0800-118922  
02-6130 0514  
01-324 8756  
022-8771260  
Hungary  
(H)  
Poland  
(PL)  
Turkey  
USA  
(TR)  
0212-3350677  
0212-3460040  
708-6817188  
(USA) 800-2662528  
Brasil  
(Mercosur)  
(BR) +55-19 3745 2769 +55-19 3745 2773  
Malaysia  
(Asia Pacific) (MAL) +604-6382 474  
+604-6413 640  
Blaupunkt GmbH  
07/03  
CM/PSS2 - 8 622 403 803  

Canon Digital Camcorders User Manual
Casio FX 220 PLUS User Manual
Clarion DXZ576USB User Manual
Crown Boiler CWD083 User Manual
Crown Boiler JSE310 User Manual
Curtis KCR2620 User Manual
Honda Automobiles S2000 User Manual
JVC Camcorder GY HD251 User Manual
JVC Car Video System KW AVX846 User Manual
JVC GR SXM967 User Manual