In Car Video
IVMR-9002
IVMR-1042
7 607 003 586
7 607 003 587
Operating and installation instructions
DEVICE OVERVIEW
@ Cable for the interior lighting
Ceiling-mounted monitor
1 Lights on the main unit
2 Light switch ON
3 Monitor latch
4 Vehicle interior lighting switch
5 Loudspeaker
(3 pin)
Red = Electrical power supply
(+12V)
White = To the door switch
(Door open = Earth)
Black = Earth
6 Infrared receiver for IR remote
A
AUX sockets
control IVRC-06
Red RCA = Audio IN (R)
White RCA = Audio IN (L)
Yellow RCA = Video IN
Infrared transmitter for IR head-
phones IVHS-01 (accessory)
7 Control button
Increase the monitor volume /
navigate in the OSD menu
8 Control button
Decrease the monitor volume /
navigate in the OSD menu
9 On/off button for the monitor
: Control button MENU
See Instructions / OSD menu.
; Control button CH
Channel selection if the monitor is
connected to a signal controller
IVSC-3302 or IVSC-5502.
< LCD screen
= Signal cable (13 pin)
> System cable (13 pin)
? Adapter cable RCA/jack (13 pin)
17
DEVICE OVERVIEW
IR remote control
D POWER
On/off button for the monitor.
E TV/VIDEO
Input selector: switch between
AV1 and AUX.
D E F G
F VOL • arrow button
Increase the volume for the se-
lected monitor.
VOL • arrow button
Decrease the volume for the se-
lected monitor.
H
I
G MUTE
Mute the volume of the loud-
speaker inside the monitor.
H CH • arrow button
/
Channel selection if the monitor is
connected to a signal controller
IVSC-3302 or IVSC-5502.
Caution:
/
The way the CH
buttons
J
function depends on the monitor
selection, which is made using
the signal controller’s remote con-
trol.
I MENU
See Instructions / OSD menu.
J Battery compartment
18
CONTENTS
Device overview ..................... 16
Ceiling-mounted monitor................ 17
IR remote control........................... 18
Contents................................. 19
Notes for the user .................. 20
Precautionary measures ................ 20
Safety notices ........................ 21
Supplied parts........................ 21
Installing the monitor ............. 22
Installing the monitor (mechanical) . 22
Cables .......................................... 23
Operation ............................... 24
Controlling the interior lighting
(monitor) ....................................... 24
Opening the monitor...................... 24
Adjusting the position of the
monitor.......................................... 25
Closing the monitor ....................... 25
Switching on the monitor ............... 25
OSD menu .................................... 26
IR headphones IVHS-01
(accessory) ................................... 26
Changing the light bulb ................. 27
Changing the battery in the
remote control ............................... 27
Specifcations ......................... 28
IVMR-9002.................................... 28
IVMR-1042.................................... 29
19
NOTES FOR THE USER
Thank you for choosing a Blaupunkt
product. We hope you enjoy using this
new piece of equipment.
Precautionary measures
Please observe all the warning notices,
precautionary measures and mainte-
nance tips contained in these operat-
ing instructions so as to extend the life
of your monitor.
Please read these operating instruc-
tions before using the equipment for
the first time.
The Blaupunkt editors are constantly
working on making the operating in-
structions clearer and easier to under-
stand. However, if you still have any
questions on how to operate the device,
please contact your dealer or the tele-
phone hotline for your country. You will
find the telephone number printed at the
back of this booklet.
● If you are the driver you must never
use the monitor during the journey
in order to avoid causing a road ac-
cident.
● Do not place the monitor in the fol-
lowing positions:
1. Positions in which it could
restrict the driver’s view.
2. Positions in which it could
become a danger to safety
(e.g. handbrake, steering wheel,
gearshift lever and airbag).
We provide a manufacturer guarantee
for our products bought within the Eu-
ropean Union. You can view the guar-
or ask for them directly at:
● Only operate the device with the
recommended voltage supply of
12 V direct current.
Blaupunkt GmbH
Hotline
● Do not attempt to open or disman-
tle the monitor, since you could suf-
fer an electric shock as a result.
Robert-Bosch-Str. 200
31139 Hildesheim
Germany
● If the monitor’s housing is dam-
aged or broken, take it to your local
specialist dealer or send it in to our
customer service centre.
We should like to point out that the right
to make a claim under the guarantee
could be forfeited if the device is
changed or modified in any way with-
out the express authorization of the
manufacturer.
● Avoid using the monitor in environ-
ments where it is subjected to dust,
dirt or moisture.
Long-term operation or storage outside
the specific temperature range can lead
to a shortening of the useful life of the
LC display.
● Do not install the monitor in places
where it is subjected to direct sun-
light or extreme temperatures.
20
NOTES FOR THE USER
SUPPLIED PARTS
Note
Supplied parts
We recommend that you allow a spe-
cialist workshop to carry out the instal-
lation.
The monitor is supplied with all the parts
listed below. Please check that the
range of parts supplied with your de-
vice is complete. If one of the listed parts
is missing, please contact your dealer
immediately.
Safety notices
Please observe the following safety
notices during installation and whilst
making the connections.
● Monitor (including mounting fixture
and screws)
● Remote control IVRC-06 with
-
Disconnect the negative and posi-
tive terminals of the battery.
battery
● 5 m long 13-pin system cable
(for signal controller IVSC-3302 or
IVSC-5502)
-
When doing so, please observe the
safety notices provided by the vehi-
cle manufacturer.
● Connection adapter (13-pin RCA/
-
Before drilling the holes necessary
for mounting the equipment and for
laying cables, please make sure
that concealed cables, the fuel tank
and fuel lines cannot be damaged
in the process!
jack)
● Operating instructions
21
INSTALLING THE MONITOR
Installing the monitor
(mechanical)
Select a suitable position for secure
installation of the monitor:
● The device must not distract the
driver or restrict the driver’s view.
Screws for securing the
mounting plate
● The ability to enter and get out of
the vehicle must not be impeded.
● The device must not be installed in
such a way that could prevent the
other vehicle components from
functioning properly (e.g. sliding
sunroof).
● Make sure that the device is in-
stalled in a safe and secure posi-
tion and that it cannot become de-
tached in the event of an emergen-
cy stop.
● Do not attach the device merely to
Screws for securing the
ceiling-mounted monitor
the roof liner.
● If you need to drill additional holes,
make sure you do not drill through
the sheet metal of the vehicle’s
roof.
● Avoid using the monitor over a
longer period of time whilst the en-
gine is off in order to prevent the
battery from becoming discharged.
22
INSTALLING THE MONITOR
Interior lighting connection (3 pin)
Cables
Red
= Operating voltage (+12 V)
White = To the door switch
(Door open = Earth)
>
?
Black = Earth
To avoid discharging the battery, we
recommend you use a switched oper-
ating voltage (ignition).
Warning notice: The operating voltage
cable must be protected with at least a
1.5 A fuse.
Monitor connection (13 pin)
System cable
(13 pin)
Adapter cable
Connect the system cable (13 pin) >
to a signal controller (IVSC-3302 or
IVSC-5502). (The voltage supply is pro-
vided by these devices. Operating in-
structions are supplied with the devic-
es).
Cable for the
interior lighting
(3 pin)
Or
Signal cable
(monitor hous-
ing) (13 pin)
Use the plug-in adapter cable ? to
connect to the 12 V supply voltage and
an external video/DVD device:
@
=
Red
= +12 V direct current
= Earth
Black
Red RCA = Audio IN (R)
White RCA = Audio IN (L)
Yellow RCA = Video IN
Jack plug
(blue)
= Do not use!
(Only for special
devices)
23
OPERATION
Controlling the interior lighting
(monitor)
Opening the monitor
● Pull back the monitor release latch
There are two switches for the lights:
3 to flip down the LCD display.
ON
2 and interior lighting
4.
● To watch television, lower the mon-
itor until it is at an angle of approx.
90° to the monitor’s base unit.
ON
:
This button is used to switch the lights
on/off.
Interior lighting
:
3
If activated, the lights only come on
when the vehicle’s doors are opened.
2
4
24
OPERATION
Adjusting the position of the
monitor
The monitor can be rotated by up to
approx. 30° to the right and left from its
central viewing position.
:
;
8
9 7
D E F G
Closing the monitor
● Turn the monitor back to its central
viewing position and push it into its
base unit so that it clips back into
the releasing/locking mechanism.
H
I
Switching on the monitor
Press the power-on button 9 on the
main unit or the button D on the re-
mote control to switch the monitor on/
off.
Note:
J
The button 9 lights up blue before the
monitor is switched on. This means that
the monitor is connected to the 12 V
voltage supply.
25
OPERATION
OSD menu
Operation
●
ZOOM (picture size)
only IVMR-9002:
Change the picture height/width
● Press the MENU button : on the
display or the MENU button I on
the remote control to open the
OSD menu.
- FULL
- NORMAL
- WIDE
●
●
●
●
BRIGHTNESS:
To adjust the brightness
●
Use the arrow buttons 7 / 8 or
I
/
to select the options. After
CONTRAST:
To adjust the contrast
you press the MENU button : or
I you can use the arrow buttons
to change the settings.
COLOR:
To adjust the colour
● Select the “EXIT” option to close
the OSD menu again.
TINT:
To adjust the picture shade (only
for NTSC)
●
REVOLVE:
To revolve the screen display
SPEAKER ON
ZOOM
BRIGHTNESS
CONTRAST
COLOR
- LEFT - RIGHT:
Mirror horizontally
TINT
- UP - DOWN:
Mirror vertically
REVOLVE LEFT-RIGHT
UP-DOWN
RESET PICTURE
EXIT
●
●
RESET PICTURE:
To reset the configured parameters
to the factory default settings.
EXIT:
●
SPEAKER ON
To close the OSD menu
Switch the internal loudspeaker on/
off (same function as the MUTE
button G on the remote control).
IR headphones IVHS-01
(accessory)
The IR transmitter window 6 must not
be covered up when using the IR head-
phones IVHS-01 (accessory).
The sound then continues to be
outputted over the IR headphones
IVHS-01 (accessory).
26
OPERATION
Light bulb specifications
Changing the light bulb
Diameter: 8 mm
● Detach the monitor from the ceiling
plate (4 screws).
Length: 28 mm
Voltage: 12 V, 3 W
Changing the battery in the
remote control
● Push the button on the battery
compartment J to the right (see A
below).
● Pull the battery compartment J
out of the remote control (see B
below).
Screws for securing the
ceiling-mounted monitor
● Change the 3 V battery (CR 2025).
● Remove the 3 screws of the metal
cover (see picture below).
● Take out the old bulb.
● Fit a new bulb (12 V, 3 W).
● Refit the monitor.
A
B
J
Metal cover
Bulb
27
SPECIFICATIONS
IVMR-9002
Screen size:
9" Monitor
Screen resolution:
Active area:
1440 (H) x 234 (V)
198.0 (H) x 111.74 (V)
Dual system NTSC/PAL
300 cd/m2
Signal system:
Brightness:
Contrast ratio:
Viewing angle:
100
Left/right: 65/65 degrees
Up/down: 50/65 degrees
Video input level:
1.0 Vpp ± 10 %
0.3 Vrms
Audio input level:
AUX input level:
1.0 Vpp ± 10 %
Carrier frequency for IR sensor:
L-CH: 2.3 MHz
R-CH: 2.8 MHz
Operating voltage (direct current):
Current consumption:
Quiescent current consumption:
Operating temperature:
Storage temperature:
Dimensions:
10-16V
1 A (at +12V)
35 mA (at +12 V)
0 - 60 °C
- 30°C to +80°C
286 x 258 x 57.4 mm
≤ 2150 g
Weight:
Subject to changes!
28
SPECIFICATIONS
IVMR-1042
Screen size:
10.4" Monitor
Screen resolution:
Active area:
1920 (H) x 480 (V)
211.2 (H) x 158.4 (V)
Dual system NTSC/PAL
290 cd/m2
Signal system:
Brightness:
Contrast ratio:
Viewing angle:
100
Left/right: 60/60 degrees
Up/down: 40/50 degrees
Video input level:
1.0 Vpp ± 10 %
0.3 Vrms
Audio input level:
AUX input level:
1.0 Vpp ± 10 %
Carrier frequency for IR sensor:
L-CH: 2.3 MHz
R-CH: 2.8 MHz
Operating voltage (direct current):
Current consumption:
Quiescent current consumption:
Operating temperature:
Storage temperature:
Dimensions:
10-16V
1.1 A (at +12 V)
70 mA (at +12 V)
0 - 60 °C
- 30°C to +80°C
322 x 305 x 63.5 mm
≤ 2450 g
Weight:
Subject to changes!
29
Service-Nummern / Service numbers / Numéros du service après-
vente / Numeri del servizio di assistenza / Servicenummers /
Telefonnummer för service / Números de servicio / Números de
serviço / Servicenumre
Country:
Phone:
Fax:
WWW:
Germany
(D)
0180-5000225
05121-49 4002
Austria
(A)
(B)
01-610 390
02-525 5454
01-610 393 91
02-525 5263
44-898 644
09-435 99236
01-4010 7320
01-89583 8394
210 57 69 473
01-4598830
02-369 6464
40 2085
023-565 6331
66-817 157
01-2185 11111
916-467952
08-7501810
01-8471650
Belgium
Denmark
Finland
France
(DK) 44 898 360
(FIN) 09-435 991
(F)
01-4010 7007
Great Britain (GB) 01-89583 8880
Greece
Ireland
Italy
Luxembourg (L)
Netherlands (NL)
Norway
Portugal
Spain
(GR) 210 57 85 350
(IRL) 01-4149400
(I)
02-369 6331
40 4078
023-565 6348
66-817 000
01-2185 00144
902-120234
08-7501500
(N)
(P)
(E)
(S)
Sweden
Switzerland (CH) 01-8471644
Czech. Rep. (CZ)
02-6130 0441
01-333 9575
0800-118922
02-6130 0514
01-324 8756
022-8771260
Hungary
(H)
Poland
(PL)
Turkey
USA
(TR)
0212-3350677
0212-3460040
708-6817188
(USA) 800-2662528
Brasil
(Mercosur)
(BR) +55-19 3745 2769 +55-19 3745 2773
Malaysia
(Asia Pacific) (MAL) +604-6382 474
+604-6413 640
Blaupunkt GmbH
01/04
CM/PSS2 - 8 622 403 936
|