Radio / Cassette
Hollywood C30
Melbourne C30
Operating instructions
5
1
3
7
2
6
8
9
10 11 12
4
14 13
17
15
16
3
CONTROLS
1
button to unlock release
panel
2
FM button, selects the FM
memory bank
3
4
Volume control knob
ON button, switches the unit on/
off
5
6
TS button, starts the TravelStore
function
AM button, selects the AM
waveband
7
8
9
:
;
Tape eject button
Tape slot
FR button, fast rewind
FF button, fast forward
GEO button, adjusts balance
and fader
<
=
CD•C button, switches sound
source between tape, radio and
CD changer (if connected)
AUDIO button, adjusts bass and
treble
LD button, switches the loud-
ness function on/off
Cursor block
>
?
MENU button, accesses the
menus for making basic settings
@
A
1 to 5 station buttons
button, indicates the time in
the display
4
CONTENTS
Important information .............. 6 CD changer operation............ 12
Traffic safety .................................... 6 Starting CD changer operation ...... 12
Installation ....................................... 6 Selecting CDs............................... 12
Accessories .................................... 6 Selecting tracks ............................ 12
Guarantee ....................................... 6 Switching the display mode ........... 12
International telephone information... 6 Repeating individual tracks or
entire CDs (REPEAT) .................... 13
Playing tracks in random order
(MIX) ............................................. 13
Scanning all of the tracks on all of
the CDs (SCAN) ........................... 13
Adjusting the scan time ................. 13
Interrupting playback (PAUSE) ...... 14
Theft protection system........... 7
Removable front panel ..................... 7
Switching the car audio
system on/off........................... 8
Volume control......................... 8
Adjusting the power-on volume ........ 8
Mute ............................................... 9
Telephone mute ............................... 9
Clock ...................................... 14
Time display .................................. 14
Setting the time ............................. 14
Selecting the 12/24-hour time
display mode ................................. 14
Activating the clock display for
Radio operation........................ 9
Switching to the radio mode ............ 9
Selecting wavebands/memory
banks .............................................. 9
Tuning into radio stations ................. 9
Adjusting seek tuning sensitivity..... 10
Storing radio stations..................... 10
Storing radio stations automatically
(TravelStore).................................. 10
Recalling stored radio stations ....... 10
HICUT (interference-related treble
cut) ............................................... 10
Tuner switchover ........................... 11
the car audio system when it is
switched off................................... 15
Adjusting the tone.................. 15
Adjusting the bass ......................... 15
Adjusting the treble ....................... 15
Switching Loudness on/off ............ 15
Adjusting the volume
distribution ............................. 16
Adjusting the balance .................... 16
Adjusting the fader ........................ 16
Tape operation ....................... 11
Tape playback ............................... 11
Switching tape sides ..................... 11
Fast tape forward/rewind .............. 11
Switching the Radio Monitor on/off:12
External audio sources .......... 16
Switching the AUX output on/off.... 16
Specifications ........................ 17
Tape eject ..................................... 12 Amplifier........................................ 17
Tuner............................................. 17
Tape .............................................. 17
5
IMPORTANT INFORMATION
Important information
Amplifiers
All Blaupunkt amplifiers can be used.
Before you use your car audio system
for the first time, please take the time to
read the instruction manual carefully
and make yourself familiar with the au-
dio equipment.Keep this manual handy
in your car for future reference.
CD changers
The following CD changers can be con-
nected directly: CDC A 06, CDC A 08,
CDC A 072 and IDC A 09.
The CDC A 05 and CDC A 071 can be
connected with an adapter cable (Blau-
punkt no. 7 607 889 093).
Traffic safety
Traffic safety is always the top
priority. Do not operate your car au-
dio system unless the traffic condi-
tions permit.Familiarize yourself with
the equipment before you start driv-
ing.
Always make sure that you are still
able to hear any warning signals
coming from outside the vehicle,
such as police or fire engine sirens,
at all times. Consequently, you
should always select a moderate
volume for playing your car audio
system while you are driving.
Guarantee
The scope of the guarantee is deter-
mined by the laws in the country where
the unit is purchased.
Regardless of the legal guarantee reg-
ulations, Blaupunkt affords a 12-month
guarantee.
If you have any questions about the
guarantee, please contact your author-
ized Blaupunkt dealer.Your cash regis-
ter receipt is a valid guarantee coupon.
International telephone
information
Have you got any questions on the op-
eration of this equipment or do you re-
quire more information?
Installation
If you would like to install your new car
stereo yourself or add other audio com-
ponents to the existing ones, then
please read the instructions on installa-
tion and connection at the end of this
manual carefully.
Give us a call!
You will find the international telephone
and fax numbers on the last page of this
manual.
Accessories
Use only Blaupunkt-approved accesso-
ries.
Remote control unit
The optionally available RC 08 infrared
remote control unit allows you to con-
veniently operate the most important
system functions from the steering
wheel.
6
THEFT PROTECTION SYSTEM
Theft protection system
1
Removable front panel
To prevent your car audio system from
being stolen, it has been equipped with
a removable front panel (release pan-
el). Without the front panel, the car au-
dio system is useless to thieves.
Protect your car audio system against
theft and take the operating panel with
you each time you leave the vehicle.
Never leave the release panel in the car,
even when it is well hidden. The panel
has been designed so that it is easy to
remove.
G First pull the operating panel
forward and then slide it to the left
to remove it.
G When you remove the operating
panel, the car audio system will
automatically switch off.
G All of the settings will remain
stored.
Notes:
G A tape inserted into the car audio
G Do not drop the release panel.
system will remain in place.
G Do not expose the release panel to
direct sunlight or other heat
sources.
Replacing the operating panel
G Slide the operating panel into the
G Protect the panel from exposure to
guides from left to right.
moisture.
G Press the left-hand side of the
panel onto the car audio system
until it locks into place.
G Store the release panel in the case
supplied.
G If the car audio system was on
when you removed the panel, it will
automatically switch back on using
the same settings when you
replace it (radio, tape or CD
changer).
Removing the operating panel
Note:
G Press
The release panel will unlock.
1.
G While replacing the panel, be
careful not to press on the display.
7
SWITCHING ON/OFF
VOLUME CONTROL
Switching the car audio
system on/off
The car audio system can be switched
on/off in a number of ways.
Volume control
The car audio system volume can be
adjusted to levels from 0 (off) to 66 (max-
imum).
G To increase the volume, turn the
volume control knob 3 to the
right.
G Switching the car audio system on/
off with the vehicle ignition.
If the car audio system has been con-
nected to your vehicle ignition, it is pos- G To decrease the volume, turn the
sible to switch it on and off with the igni-
tion.
volume control knob 3 to the left.
Adjusting the power-on volume
It is possible to adjust the volume at
which the car audio system switches on.
You can also switch the car audio sys-
tem on when the ignition is switched off.
G Press down and hold 4 until the
G Press MENU ?.
car audio system switches on.
G Press >.
Note:
“ON VOLUME” will appear in the dis-
play.
To prevent the car battery from running
down, the radio will switch off again au-
tomatically after one hour.
G Press
> to adjust the volume.
To make it easier to select the desired
volume, you will be able to hear any
changes made while you are adjusting
the volume.
G Switching the car audio system on/
off with the removable front panel
G Remove the release panel.
The car audio system will switch off.
G Replace the release panel.
If you adjust this setting to 0, the car
audio system will switch on at the vol-
ume used before it was switched off.
The car audio system will switch on
again.The last settings used (radio, tape
or CD changer) will be activated.
Warning of serious injury
When the power-on volume is set to
the maximum level, it may be ex-
tremely loud when the car audio sys-
tem is switched on.
When the power-on volume is set to
0 and the car audio system was
played at maximum volume before it
was switched off, it may be extreme-
ly loud when the car audio system is
switched back on. This could result
in serious injury to your ears.
G Switching the car audio system on/
off by pressing 4.
G Press 4 to switch the car audio
system on.
G Press 4 for longer than 2 seconds
to switch the car audio system off
again.
8
VOLUME CONTROL
RADIO OPERATION
G Once you have selected the
Radio operation
desired settings, press MENU ?.
Switching to the radio mode
If you are currently using the tape play-
er or CD changer,
Mute
You can reduce the volume of the car
audio system immediately (mute).
G press CD•C < repeatedly until
G Press 4.
“RADIO” appears in the display.
Selecting the mute level
It is possible to select the mute level.
G Press MENU ?.
Selecting wavebands/memory
banks
Using this car audio system, you can
tune into radio stations on the FM and
AM wavebands. There are three mem-
ory banks for the FM waveband and one
memory bank for AM.You can store five
stations in each of these memory banks.
G Press > repeatedly until
“MUTE LEVEL” appears in the
display.
G Press
> to select the mute
level.
Selecting FM
G Once you have made your selec-
G To switch between the FM wave-
bands FM1, FM2 and FMT, press
FM 2.
tion, press MENU ?.
Telephone mute
If your car audio system has been Selecting AM
equipped with a mobile telephone, it will
G To switch between the AM wave-
automatically switch to mute when you
use the phone. This will not work un-
less the mobile phone is connected to
the car audio system as described in
the installation instructions.
band, press AM 6.
Tuning into radio stations
You can tune into radio stations in a
number of different ways.
The car audio system will be muted to
the mute level selected.
Automatic seek tuning
G Press or >.
The radio will tune into the next availa-
ble station within reception range.
9
RADIO OPERATION
Adjusting seek tuning sensitivity G Press and hold down one of the
station preset buttons 1 to 5 @ on
which you want to store the radio
station for longer than one second.
It is also possible to adjust the sensitiv-
ity of the seek tuning function. In this
way you can adjust the radio to tune into
stations with strong reception signals
only, or to those with weaker reception
automatically (TravelStore)
signals as well.
Storing radio stations
You can automatically store the five ra-
dio stations with the strongest reception
G Press MENU ?.
G Press > repeatedly until
in the area.These stations will be stored
in the FMT or AM memory bank, de-
pending on which waveband you have
selected.
“SENS” appears in the display.
G Press >.
The currently selected setting will ap-
pear in the display. “SENS HI”indicates
the highest level of sensitivity, “SENS
LO” the lowest.If you select “SENS LO”,
“lo” will light up in the display.
Note:
Any stations stored previously in the
memory bank will be deleted.
G Press TS 5 briefly.
The storing process will begin. “T-
STORE”will appear in the display. After
the stations have been stored, the ra-
dio will automatically begin to play the
station stored on preset button 1 for the
corresponding memory bank.
G Press
sensitivity.
> to adjust the desired
G Once you have made your selec-
tion, press MENU ?.
Manual station tuning
You can also tune into radio stations
manually.
Recalling stored radio stations
G Select the desired station memory
G Press or >.
bank.
Storing radio stations
Storing radio stations manually
G Press the station button 1 to 5 @
on which you have stored the
desired radio station.
G Select the desired FM memory
bank FM1, FM2, FMT or the AM
waveband.
HICUT (interference-related
treble cut)
The HICUT function improves reception
when reception begins to deteriorate. If
interference occurs, the treble, and con-
sequently the noise level, is cut auto-
matically.
G Tune into the radio station you
would like to store.
10
RADIO OPERATION
TAPE OPERATION
Switching HICUT on/off
G Press MENU ?.
Tape operation
Tape playback
G If there is no tape in the car audio
“MENU” will appear in the display.
G Press > repeatedly until
system
“HICUT” appears in the display.
G insert a tape into the tape deck with
G Press or > to switch HICUT
the open side facing to the right.
on or off.
Tape playback will begin with the side
facing upwards. A tape symbol will light
up in the display.
“HICUT 0” indicates that the function is
switched off; when “HICUT 1”appears,
the treble and the noise level will be cut.
G If there is a tape in the car audio
system
G Press MENU ?.
G press CD•C < repeatedly until
Tuner switchover
“TAPE” appears in the display.
The car audio system has been
equipped with a multi-band tuner. The
tuner can be adjusted to accommodate
different requirements in different coun-
tries. The following regions can be se-
lected:America, Europe, Asia andThai-
land. The tuner will not be completely
The tape will begin to playback from the
side last selected.
Switching tape sides
G Press FR 9 and FF : at the
same time.
functional until it has been adjusted to The tape will switch sides.Once the tape
the country in which it is being used.
Switching over the tuner
G Press MENU ?.
reaches the end, it will automatically
switch to the other side (Autoreverse).
Fast tape forward/rewind
Fast forward
G Press > repeatedly until “FM
TUNER” appears in the display.
G Press FF : (fast forward) until the
G Press
> to select the country.
button locks into place.
G Once you have made your selec-
“FORWARD” will appear in the display.
tion, press MENU ?.
Fast rewind
G Press FR 9 (fast rewind) until the
button locks into place.
“REWIND” will appear in the display.
11
TAPE OPERATION
CD CHANGER OPERATION
CD changer operation
Stopping fast forward/rewind
G Press the button for the opposite
Note:
direction.
Refer to the instructions included with
the CD changer for more information on
how to handle CDs, how to insert CDs
into the changer and how to operate the
changer.
Playback will resume.
Switching the Radio Monitor on/
off:
While the tape is fast forwarding or re-
winding, you can listen to the radio sta-
Starting CD changer operation
tion you were tuned into last. To do this G Press CD•C < repeatedly until
you have to switch on the “Radio Moni-
tor”.
“CHANGER” appears in the
display.
Playback will begin with the first CD the
changer detects in the magazine.
G Press MENU ?.
“MENU” will appear in the display.
Selecting CDs
G Press > repeatedly until “RM
ON” or “RM OFF” appears in the
display.
G To select a different CD up or
down, press or > once or
the required number of times.
G Press or > to switch the radio
monitor on or off.
Selecting tracks
G Press MENU ?.
G To select a different track up or
down on the CD currently playing,
press or > once or the
required number of times.
Tape eject
G Press 7.
Remove the tape from the car audio
system.
Switching the display mode
To switch the display between the CD
number and the elapsed playing time,
G press MENU ?.
“MENU” will appear in the display.
G Press > repeatedly until “CDC
DISP” appears in the display.
G Press >.
The current setting will be shown in the
display.“TIME” stands for elapsed play-
ing time and “CD NO” for the display of
the CD number.
12
CD CHANGER OPERATION
Note:
G Press > to select the desired
The CDC A 08 is able to play all of the
CDs in the changer in random order.
The other CD changers first play all of
the tracks on a CD in random order and
then select the next CD in the changer.
setting.
G Press MENU ?.
Repeating individual tracks or
entire CDs (REPEAT)
Stopping the MIX function
G To repeat the track currently
playing, press 3 (RPT) @ briefly.
G To stop the MIX function, press
4 (MIX) @ repeatedly until “MIX
OFF” appears in the display and
MIX no longer lights up.
“RPT TRCK” will appear briefly in the
display, RPT will light up in the display.
G To repeat the entire CD currently
playing, press 3 (RPT) @ again.
Scanning all of the tracks on all
“RPT DISC” will appear briefly in the of the CDs (SCAN)
display, RPT will light up in the display.
G To scan all of the tracks on all of
the CDs in ascending order, press
Stopping the REPEAT function
5 (SCAN) @.
G To stop the REPEAT function for
the current track or CD, press
3 (RPT) @ repeatedly until “RPT
OFF” appears in the display and
RPT no longer lights up.
“SCAN” will appear in the display.
Stopping the SCAN function
G To stop the SCAN function, press 5
(SCAN) @ again briefly.
Playing tracks in random order
(MIX)
The track currently scanned will contin-
ue playing.
G To play the tracks of the currently
selected CD in random order,
press 4 (MIX) @ briefly.
Note:
It is possible to adjust the scan time.
Adjusting the scan time
G Press MENU ?.
“MIX-CD” will appear briefly in the dis-
play, MIX will light up in the display.
“MENU” will appear in the display.
G To play the tracks of all of the CDs
in random order, press 4 (MIX) @
again.
G Press > repeatedly until
“SCANTIME” appears in the
display.
“MIX ALL” will appear briefly in the dis-
play, MIX will light up in the display.
G Press
as desired.
> to set the scan time
G Once you have made your selec-
tion, press MENU ?.
13
CD CHANGER OPERATION
CLOCK
Interrupting playback (PAUSE)
CLOCK
G Press 2 ( ) @.
“PAUSE” will appear in the display.
Time display
G To display the time briefly, press
A briefly.
Stopping PAUSE
G Press 2 ( ) @ during the pause.
Playback will resume.
Setting the time
G To set the time, press MENU ?.
G Press > repeatedly until
“CLOCKSET” appears in the
display.
G Press >.
The time will appear in the display. The
minutes will flash and can be altered.
G Press
> to alter the minutes.
G Once you have altered the minutes,
press >.The hours will begin to
flash.
G Press
> to alter the hours.
G Once you have set the time, press
MENU ?.
Selecting the 12/24-hour time
display mode
G Press MENU ?.
“MENU” will appear in the display.
G Press > repeatedly until “24 H
MODE” or “12 H MODE” appears
in the display.
G Press or > to switch the
display mode.
G Once you have selected the mode,
press MENU ?.
14
CLOCK
TONE
Activating the clock display for
the car audio system when it is
switched off
Adjusting the tone
Adjusting the bass
G To adjust the bass, press AUDIO
G To activate the clock display for the
car audio system when it is
=.
“BASS” will appear in the display.
switched off, press MENU ?.
G Press or > to alter the bass.
“MENU” will appear in the display.
G Press > repeatedly until
“CLOCK OFF” or “CLOCK ON”
appears in the display.
Adjusting the treble
G To adjust the treble, press AUDIO
=.
G Press or > to switch the clock
“BASS” will appear in the display.
G Press AUDIO = again.
display on or off.
G Once you have made the setting,
“TREBLE” will appear in the display.
G Press or > to alter the treble.
press MENU ?.
Switching Loudness on/off
Loudness boosts the bass and treble
when the volume is low to create a more
natural sound.
G Press AUDIO = for approx. two
seconds.
LD will light up in the display when Loud-
ness is active.
Adjusting Loudness intensity
The Loudness boost can be set in stag-
es from one to six.
G Press MENU ?.
G Press > repeatedly until
“LOUDNESS” appears in the
display.
G Press or > to alter the
Loudness setting.
G Once you have completed adjust-
ing the settings, press MENU ?.
15
VOLUME DISTRIBUTION
(BALANCE/FADER)
EXTERNAL AUDIO
SOURCES
Adjusting the volume
distribution
External audio sources
In place of the CD changer it is also
possible to connect other external au-
dio sources to the line output. These
sources can include a portable CD play-
er, MiniDisc player or MP3 player.
If you would like to connect another ex-
ternal audio source, you will require a
Blaupunkt adapter cable with the Blau-
punkt no.: 7 607 897 093.
Adjusting the balance
G To adjust the balance, press GEO
;.
“BAL” will appear in the display.
G Press or > to alter the
balance between the left and right
speakers.
You must activate the AUX output in the
menu.
Adjusting the fader
Switching the AUX output on/off
G Press MENU ?.
G To adjust the fader, press GEO ;.
“BAL” will appear in the display.
G Press GEO ; again.
“MENU” will appear in the display.
G Press > repeatedly until “AUX
OFF” or “AUX ON” appears in the
display.
“FADER” will appear in the display.
G Press or > to alter the fader
for the front and rear speakers.
G Press or > to switch AUX on
or off.
G Once you have completed your
selections, press MENU ?.
Note:
You can then press CD•C < to select
the AUX output.
16
SPECIFICATIONS
Specifications
Amplifier
Output power:
4 x 25 watts sinus
acc. to DIN 45
324 at 14.4 V
4 x 40 watts max.
power
Tuner
Wavebands:
FM :
AM :
87.5 – 108 MHz
531 – 1602 kHz
FM frequency response:
20 - 16 000 Hz
Tape
Frequency response:
30 - 18 000 Hz
Subject to technical modification!
17
Service numbers / Numéros du service après-vente /
Números de servicio / Número de serviço
Tel.:
Fax:
Deutschland
Belgique / België
France
Nederland
Great Britain
Danmark
Sverige
0 18 05 00 02 25
0 25 25 54 44
014 010 70 07
023 565 63 48
018 958 383 66
44 89 83 60
0 51 21 49 40 02
0 25 25 54 48
014 010 73 20
023 565 63 31
018 958 383 94
44 89 86 44
08 750 15 00
66 81 70 00
08 750 18 10
66 81 71 57
Norge
Suomi
Österreich
094 359 91
01-6 10 39-0
015 762 241
094 359 92 36
01-6 10 39-391
015 769 473
âeská republika
USA
Singapore
Slovensko
026 130 04 41
800-266 25 28
006 535 054 47
042 175 873 212
026 130 05 14
708-681 71 88
006 535 053 12
042 175 873 229
Blaupunkt-Werke GmbH
Bosch Gruppe
01/2000 TRO
K7/VKD 8 622 402 135
Radio / Cassette
Hollywood C30
Melbourne C30
Installation instructions
Notice de montage
Instrucciones de instalación
Instrução de montagem
Installation instructions • Notice de montage •
Instrucciones de instalación • Instruções de montagem
GB
-
-
La section du câble (+) et (-) ne
doit pas dépasser 1,5 mm2.
Safety instructions
When carrying out installation work
and making connections please
observe the following safety
instructions:
En cas d’erreur d’installation, des
perturbations peuvent survenir
dans les systèmes électroniques
du véhicule ou dans votre
autoradio.
-
Disconnect the negative terminal of
the battery! When doing so, please
observe the vehicle manufacturer’s
safety instructions.
-
-
Ne pas brancher les connecteurs
du véhicule sur la radio !
Les câbles d’adaptation
-
-
-
Make sure you do not damage
vehicle components when drilling
any holes.
nécessaires pour le type de
véhicule sont disponibles auprès
des revendeurs BLAUPUNKT.
The cross sections of the positive
and negative cables must not be
less than 1.5 mm2.
E
Normas de seguridad
Incorrect installation may cause
interference with electronic vehicle
systems or your car radio.
Durante el montaje y la conexión es
imprescindible observar las
siguientes normas de seguridad.
-
-
Do not connect the vehicle’s plug
connectors to the radio!
-
Desemborne el polo negativo de la
batería.
Observe las normas de seguridad
dadas por el fabricante del
vehículo.
You can obtain the adapter cable
required for your vehicle type from
any BLAUPUNKT dealer.
-
-
-
Al perforar agujeros, asegúrese de
no dañar ninguna pieza del
vehículo.
F
Consignes de sécurité
Respecter les consignes de sécurité
suivantes pendant la durée du
montage et du branchement.
La sección transversal del cable
positivo y del cable negativo no
debe ser menor de 1,5 mm2.
-
Débrancher le pôle (-) de la
batterie ! Respecter les consignes
de sécurité du constructeur
automobile !
Una instalación incorrecta puede
provocar perturbaciones en los
sistemas electrónicos del vehículo
o en la radio.
-
Veiller à n’endommager aucune
pièce du véhicule en perçant des
trous.
-
¡No conecte a la radio los
conectores ubicados en el
vehículo!
60
-
Los cables adaptadores
Supplied Mounting Hardware
Materiel de montage fourni
necesarios para su vehículo los
encontrará en el comercio
especializado en artículos de la
marca BLAUPUNKT.
Ferretería de montaje
suministrada
Medföljande monteringsdetaljer
P
Instruções de segurança
Elementos de fixação
fornecidos.
Durante a montagem e a ligação do
aparelho, queira respeitar as
seguintes instruções de segurança.
-
Separar o pólo negativo da bateria
! Respeitar ao mesmo tempo as
instruções de segurança do
fabricante do automóvel.
A
B
-
Quando se procede à furagem de
buracos, prestar atenção para não
serem danificadas quaisquer
partes do veículo.
-
-
As secções transversais dos cabos
positivo e negativo não devem ser
inferiores a 1,5 mm2.
D
E
F
C
Se a montagem for executada de
forma incorrecta podem ocorrer
avarias nos sistemas electrónicos
do automóvel ou no seu auto-
rádio.
G
-
-
Não ligar as fichas existentes do
lado do automóvel ao auto-rádio!
H
Os cabos adaptadores necessários
para o seu automóvel podem ser
adquiridos nos revendedores da
BLAUPUNKT.
J
I
61
1.
Adaptador específico del vehículo, el
cual se puede adquirir en el comercio
especializado.
Cabo de adaptação específico do
automóvel que pode ser adquirido no
comércio especializado.
12V
4.
2.
D
C
E
F
182
165
53
Antenna
1-20
5.
A
8 601 910 002
1
2
B
3.
1
2
6.
7 607 621 . . .
Car-specific adapter cable which is
available at your dealer.
12V
Câble adaptateur spécifique au
véhicule, disponible dans le
commerce.
62
7.
C-1 C-2 C-3
A
B
1
4
7
10
13 16 19
1
2
3
4
5
6
7
8
nc
Telefon Mute
nc
Permanent +12V
Aut. antenna
Illumination
Kl.15/Ignition
GND
1
2
3
4
5
6
7
8
Speaker out RR+
Speaker out RR-
Speaker out RF+
Speaker out RF-
Speaker out LF+
Speaker out LF-
Speaker out LR+
Speaker out LR-
3
6
9
12
15 18
C
B
A
2
5
8
11
14 17 20
1
3
4
5
6
7
2
8
1
3
4
5
6
7
8
2
C
C1
C2
C3
1
2
3
4
5
6
Line Out LR
Line Out RR
Line Out GND
Line Out LF
Line Out RF
7
8
9
10
11
12
nc
nc
nc
13
14
15
16
17
18
19
20
Bus - In
Bus - Out
Permanent +12V
+12V
Bus - GND
AF - GND
Line In - L
Line In - R
RC +12V
Remote Control
RC - GND
+12V Amplifier
Equalizer
Amplifier
Remote
Control
CD-Changer
63
8.
G
12V
(max. 150 mA)
Relais
+
-
4 Ohm
I
LR
+
LF
RF
4 Ohm
4 Ohm
4 Ohm
RR
-
+
-
+
-
Kl. 15 +12V
H
7
8
5
3
1
6
4
2
Telefon Mute
(low)
12V
This information is subject to change without notice!
Sous réserve de modifications!
Modificaciones reservadas!
Sob reserva de alterações!
64
|