Blaupunkt Hamburg CD70 User Manual

Radio / CD  
Hamburg CD70  
Phoenix CD70  
Operating instructions  
Open here  
Ouvrir s.v.p.  
Por favor, abrir  
Favor abrir  
2
2
3
4
1
5
6
9
8
14  
13  
12  
11  
10  
7
3
OPERATING ELEMENTS  
1
2
button for opening the control unit  
Button for switching the device on and  
off and for muting the device  
Volume control  
Softkeys. The function of the Softkeys  
depends on the contents of the dis-  
play at the time  
3
4
5
6
OK button for confirming menu entries  
and for leaving the menu  
DEQ button for calling up the equaliz-  
er menu  
7
8
Multi-function rocker  
MENU button, which calls up the bas-  
ic settings menu  
9
:
AUD button for adjusting bass, treble,  
balance, fader and loudness  
DIS button, to change the contents of  
the display  
;
<
=
Display  
CD button, to start playing the CD  
CDC button, to start play from the CD  
changer (only if connected) or  
play from an external audio source  
(only if connected)  
>
TUNE button, to begin radio operation  
Calling up the radio function menu  
(only possible when the radio is  
switched on)  
4
CONTENTS  
Notes ............................................... 6 CD operation................................. 18  
Road safety ............................................. 6  
Fitting ...................................................... 6  
Accessories............................................. 6  
Guarantee ............................................... 6  
International telephone information......... 6  
Starting CD operation and inserting  
the CD ................................................... 18  
Removing the CD .................................. 18  
Selecting a track.................................... 18  
Fast searching (audible) ........................ 18  
Random Track Replay (MIX) ................. 18  
Scanning tracks (SCAN) ....................... 18  
Repeating tracks (REPEAT) .................. 19  
Changing the display contents .............. 19  
Programming favourite CD tracks ......... 19  
Naming CDs.......................................... 20  
KeyCard Theft Protection .............. 7  
Inserting the KeyCard ............................. 7  
Removing the KeyCard ........................... 7  
Replacing KeyCards / “Training” a  
second KeyCard ...................................... 7  
KeyCard lost or damaged........................ 8  
Training a new KeyCard / Entering the  
master code ............................................ 8  
Visual theft protection (LED) ................... 8  
Display Radio Passport Data .................. 9  
Care of the KeyCard................................ 9  
CD changer operation (optional) 21  
Starting CD changer operation ............. 21  
Selecting a CD ...................................... 21  
Selecting a track.................................... 21  
Fast searching (audible) ........................ 21  
Changing the display contents .............. 21  
Repeat play of individual tracks or  
whole CDs (REPEAT) ........................... 21  
Playing tracks in random sequence  
(MIX) ..................................................... 21  
Sampling all tracks on all CDs (SCAN) . 22  
Naming CDs.......................................... 22  
Programming favourite CD tracks ......... 23  
Switching on and off ...................... 9  
Adjusting the volume................... 10  
Tone and volume .......................... 11  
Adjusting the display ................... 12  
Radio Operation ........................... 13  
Switching to Radio Mode ...................... 13  
RDS Function ........................................ 13  
Tuner Alternative ................................... 13  
Select Waveband/Memory Level ........... 13  
Setting the station ................................. 14  
Setting station search sensitivity ........... 14  
Saving a station..................................... 14  
Saving a station automatically  
(Travelstore) .......................................... 14  
Going to a pre-set station ...................... 14  
Scanning through stations .................... 15  
Setting sample duration (Scantime) ...... 15  
Program type (PTY) .............................. 15  
Optimising radio reception .................... 16  
Switching between stereo and mono .... 17  
Changing information displayed ............ 17  
Setting the tuner .................................... 17  
CLOCK - Time ............................... 24  
Setting the time ..................................... 24  
Selecting 12/24-hour clock mode .......... 24  
Having the time displayed constantly  
when the device is switched off............. 24  
Equalizer ....................................... 25  
Adjustment instructions ......................... 25  
Switching the equalizer on and off ........ 25  
Adjusting the equalizer .......................... 25  
Adjusting the sharpness of the filter ...... 25  
Selecting the tone preset ...................... 25  
Level meter / Spectrometer ................... 26  
Equalizer adjustment guide ................... 26  
External audio sources................ 27  
Pre-amplifier / subout .................. 27  
Technical data .............................. 28  
Installation instructions............. 109  
5
NOTES  
Thank you for choosing a Blaupunkt product.  
We hope your new device brings you a lot of  
pleasure.  
CD changer  
The following Blaupunkt CD changers can be  
connected:  
CDC A 06, CDC A 08, CDC A 072 and IDC  
A 09.  
If an adapter cable is used (Blaupunkt No.  
7 607 889 093) the CDC A 05 or CDC A 071  
CD changers can also be connected.  
Note  
Before you use your car radio for the first time,  
please read this guide carefully and make  
yourself familiar with the device. Keep this  
guide in the car for later reference.  
Guarantee  
The extent of the guarantee depends on the  
statutory conditions applicable in the country  
where the device was bought.  
Regardless of statutory requirements, Blau-  
punkt offer a twelve month guarantee.  
If you have any questions about your gua-  
rantee, please refer to your authorised Blau-  
punkt dealer. In every case the purchase re-  
ceipt constitutes the guarantee documenta-  
tion.  
Road safety  
Road safety has the first priority. Only  
make adjustments to your car radio when  
the traffic conditions allow.Familiarise your-  
self with the device before you start driv-  
ing.  
You must be able to hear audible alarms  
from police vehicles, fire engines or am-  
bulances promptly when inside the vehi-  
cle.You must therefore listen at an appro-  
priate volume when travelling.  
International telephone  
information  
If you have any questions about the opera-  
tion of the device, or if you need any other  
information, please call us!  
Fitting  
If you want to fit your car radio yourself, read  
the fitting and connecting notes at the end of  
the guide.  
The numbers for the telephone information  
are on the last page of this guide.  
Accessories  
Only use accessories approved by Blaupunkt.  
Remote control  
The optional RC 10, RC 10 H, and RC 08  
remote controls allow you to control your car  
radio’s basic functions safely and convenient-  
ly.  
Amplifier  
Any Blaupunkt amplifier can be used.  
6
THEFT PROTECTION  
Note:  
KeyCard Theft Protection  
If the wrong kind of card, such as a credit card,  
is inserted into the device, “Wrong KC” will  
appear on the display.  
Two KeyCards are included with your car ra-  
dio.  
Remove the incorrect card, and insert a Key-  
Card that is known to the device.  
If one KeyCard is lost or damaged you can  
obtain a replacement through your Blaupunkt  
dealer.  
Removing the KeyCard  
To unlock the control unit:  
Press the button, 1.  
The control unit opens.  
If you use two KeyCards, the settings of the  
first KeyCard are adopted by the first Key-  
Card. You can, however, store the following  
functions separately:  
station button allocation, bass, treble, balance  
and fader settings, loudness, beep volume  
and equalizer settings.  
Push the card with the holder to the  
right until you feel it stop.  
Remove the card from the control unit.  
In addition to this, the most recent settings  
for waveband, station, RDS,scan time, search  
sensitivity, initial volume and SHARX are  
stored.  
Close the control unit.  
Note:  
In order to prevent theft, remove the KeyCard  
whenever you leave the vehicle, and leave the  
control unit opened.  
This means that the basic settings you have  
selected are made as soon as the KeyCard  
is inserted.  
For reasons of safety the control unit  
must always be closed when the vehicle is  
moving.  
Inserting the KeyCard  
Press the button, 1.  
The control unit opens.  
Replacing KeyCards / “Training”  
a second KeyCard  
Insert the KeyCard, as shown in the di-  
agram (arrow 1), with the contact sur-  
faces downwards.  
Note:  
A maximum of two KeyCards can be used  
per device.  
If you already have two KeyCards for the de-  
vice and you “train” a third KeyCard, the de-  
vice can no longer be operated with the Key-  
Card not involved in the training process.  
1
3
Gently push the KeyCard with the hold-  
er in the direction of the arrow (2) until  
you feel it stop.  
Close the control unit (arrow 3).  
7
THEFT PROTECTION  
To train” a new KeyCard in case of loss or  
damage:  
Training a new KeyCard /  
Entering the master code  
If you no longer have a valid KeyCard for your  
device, and would like to train a new KeyCard:  
Insert the first KeyCard and switch the  
device on.  
Press the MENU button, 8.  
Insert the new, unknown KeyCard into  
the device.  
Press the or button, 7, until  
“LEARN KC” appears in the display.  
Close the control unit.  
Press the button, 7.  
If necessary, switch the device off.  
“CHANGE” appears in the display.  
Hold down the TUNE and ST1 buttons,  
> and 4, at the same time.  
Remove the first KeyCard.  
Switch the device on with the main but-  
Insert the new KeyCard.  
“LEARN OK” appears in the display.  
To leave the menu:  
ton, 2.  
“0000” appears in the display.  
Enter the four-figure master code from the Car  
Radio Passport as follows:  
Press the MENU button, 8.  
The radio can now be operated with the new  
KeyCard.  
Enter each of the numbers for the mas-  
ter code using the and buttons,  
7, pressing until the desired number  
appears in the display.  
KeyCard lost or damaged  
If all the KeyCards belonging to a device are  
damaged or lost, a new KeyCard will have to  
be “retrained” with the device’s master code.  
You will find this code in the device’s Car Ra-  
dio Passport.  
To enter the next/previous digit, use the  
and buttons, 7.  
When the master code is correctly dis-  
played, press the OK button, 5.  
If the device switches to play, the new Key-  
Card has been accepted.  
Keep your Car Radio Passport in a  
safe place, but never in the car itself.  
The instructions for this are in the section on  
Training a new KeyCard / Entering the mas-  
ter code”.  
Visual theft protection (LED)  
When the device is switched off and the Key-  
Card has been removed, the power button  
and the CD slot illumination can be set to flash.  
This is done by setting “LED” to “ON” in the  
menu.  
Using this KeyCard, you can then “train” a  
second KeyCard. Please read the section on  
“Replacing / Training KeyCards”.  
New KeyCards can be obtained from your  
dealer.  
Press the MENU button, 8.  
Press the or button, 7, until either  
“LED ON” or “LED OFF” appears in the  
display.  
Press the or button, 7, to switch  
between the settings ON and OFF.  
Press the OK button, 5, or the MENU  
button, 8, to leave the menu. The set-  
tings are then saved.  
8
THEFT PROTECTION  
SWITCHING ON AND OFF  
Switching on and off  
There are a number of methods for switching  
the device on or off.  
Display Radio Passport Data  
Using the KeyCard supplied, you can view  
Radio Passport data such as device name,  
type number (7 6 ...) and device number in  
the display.  
Switching on and off with the  
button 2  
Press the MENU button, 8.  
Press the or button, 7, until  
Press the main button, 2, to switch on.  
The device switches on.  
“READ KC” appears in the display.  
Press the button, 7.  
To switch off, hold the main button, 2,  
The Radio Passport data is shown on the dis-  
play as scrolling text.  
pressed for longer than two seconds.  
The device switches off.  
To leave the menu:  
Switching on and off with the  
vehicle ignition  
If the device is correctly connected to the ve-  
hicle ignition, and has not been switched off  
with the main button, 2, it is switched on and  
off along with the ignition.  
Press the OK button, 5 or the MENU  
button, 8, to leave the menu. The set-  
tings are then saved.  
Care of the KeyCard  
The KeyCard can only function properly if the  
contacts are free of particles. Avoid touching  
the contacts with your skin.  
You can also switch the device on when the  
ignition is off.  
If necessary, clean the KeyCard contacts us-  
ing a lint-free cloth dipped in alcohol.  
Press the main button, 2.  
Note:  
In order to protect the vehicle battery, the  
device is automatically switched off after an  
hour if the vehicle ignition is off.  
Switching on and off with the  
KeyCard  
You can also switch the device on and off by  
inserting and removing the KeyCard, if the  
device was not previously switched off with  
the main button, 2. Read the chapter on  
“KeyCard theft protection” for information  
about inserting and removing the KeyCard.  
9
VOLUME  
Muting  
Adjusting the volume  
You can reduce the level of the volume (mute)  
suddenly.  
The volume can be adjusted in steps from 0  
(off) to 66 (maximum).  
Press the main button, 2.  
“MUTE” is shown on the display.  
To increase the volume, turn the volume  
control to the right.  
To reduce the volume, turn the volume  
Cancelling the mute  
Press the main button, 2.  
or  
control to the left.  
Adjusting the switch-on volume  
The volume level of the device when it is  
switched on can be adjusted.  
Turn the volume control, 3.  
Muting during telephone  
operation  
If your car radio is connected to a mobile tele-  
phone, the radio is muted when the telephone  
is taken “off the hook”. This requires the mo-  
bile telephone to be connected to the car ra-  
dio as described in the fitting instructions.  
Press the MENU button, 8.  
Press the button, 7, as often as is  
necessary for “ON VOLto appear in the  
display.  
Adjust the switch-on volume with the  
buttons, 7, or with the volume  
control.  
Adjusting the volume for the  
confirmation tone (beep)  
If you set a volume level below “1”, “LAST  
VOLwill appear in the display. This means  
that whatever volume was in use before the  
device was switched off will be activated again  
when the device is switched on.  
With certain functions, if you hold a button  
pressed for longer than two seconds, for in-  
stance in order to save a station frequency to  
a station button, a confirmation tone, or beep,  
is generated. The volume level of the beep  
can be adjusted.  
Risk of serious injury!  
If the level of switch-on volume is set to  
maximum, the volume when switching on  
can be very high.  
Press the MENU button, 8.  
Press the button, 7, as often as is  
necessary for “BEEP” to appear in the  
display.  
If the volume was set to maximum  
before switching off, and the value for the  
switch-on volume is set toLASTVOL, the  
volume when switching on can be very  
high.  
Adjust the volume with the  
buttons,  
7, or with the volume control. “0”  
means that the beep is off, while “9” is  
the maximum beep volume.  
Either case can result in serious injury to  
hearing!  
Press the OK button, 5, or the MENU  
button, 8, to leave the menu. The set-  
tings are then saved.  
Press the OK button, 5, or the MENU  
button, 8, to leave the menu. The set-  
tings are then saved.  
10  
TONE AND VOLUME  
Adjusting the left/right volume  
balance  
Tone and volume  
Note:  
In order to adjust the balance, press the  
You can make separate adjustments to the  
bass, treble and loudness for each audio  
source.  
AUD button, 9.  
“BASS” appears in the display.  
Press the or button, 7, as often  
as is necessary for “BALto appear in  
the display.  
Adjusting the bass  
Press the AUD button, 9.  
“BASS” appears in the display.  
Press the or buttons, 7, in order  
to adjust the balance between left and  
right.  
Press the or buttons, 7, in order  
to adjust the bass.  
When you have finished the adjustment  
Press the AUD button, 9.  
When you have finished the adjustment  
Press the AUD button, 9.  
Adjusting the front/rear volume  
ratio (fader)  
Adjusting the treble  
Press the AUD button, 9.  
“BASS” appears in the display.  
In order to adjust the fader, press the  
AUD button, 9.  
Press the or button, 7, as often  
as is necessary for “TREBLE” to appear  
in the display.  
“BASS” appears in the display.  
Press the or button, 7, as often  
as is necessary for “FADER” to appear  
in the display.  
Press the or buttons, 7, in order  
to adjust the treble.  
Press the or buttons, 7, in order  
to adjust the balance between front and  
rear.  
When you have finished the adjustment  
Press the AUD button, 9.  
When you have finished the adjustment  
Press the AUD button, 9.  
Loudness  
Loudness refers to a bass boost at low vol-  
ume levels matching the ear’s sensitivity.  
Press the AUD button, 9.  
“BASS” appears in the display.  
Press the or button, 7, as often  
as is necessary for “LOUD” to appear in  
the display.  
Press the or buttons, 7, in order  
to adjust the loudness. “LOUD OFF”  
means that the loudness function is in-  
active, while “LOUD 6” indicates the  
maximum loudness boost.  
When you have finished the adjustment  
Press the AUD button, 9.  
11  
DISPLAY  
Night-time display brightness  
Adjusting the display  
You can adjust the display to its location in  
your vehicle and to your taste.  
Press the MENU button, 8.  
Press the or button, 7, as often  
as is necessary for “DIM NGHT” to ap-  
pear in the display.  
Adjusting the viewing angle  
Press the MENU button, 8.  
Adjust the brightness with the  
key,  
7.  
Press the or button, 7, as often  
as is necessary for “ANGLE” to appear  
in the display.  
Press the OK button, 5 or the MENU  
button, 8, to leave the menu. The set-  
tings are then saved.  
Adjust the viewing angle with the  
key, 7.  
Press the OK button, 5 or the MENU  
button, 8, to leave the menu. The set-  
tings are then saved.  
Adjusting the display brightness  
If your car radio has been connected as de-  
scribed in the fitting instructions, the display  
brightness will switch with the headlights.The  
display brightness can be set at separate lev-  
els for day and night in steps from 1 to 9.  
Daytime display brightness  
Press the MENU button, 8.  
Press the or button, 7, as often  
as is necessary for “DIM DAY” to appear  
in the display.  
Adjust the brightness with the  
key,  
7.  
Press the OK button, 5 or the MENU  
button, 8, to leave the menu. The set-  
tings are then saved.  
12  
RADIO OPERATION  
Switching TA on and off  
Radio Operation  
To use the TA function:  
Switching to Radio Mode  
If the car radio is in another operating mode:  
Press the softkey, 4, indicating “TA”.  
The TA function is active when “TA” appears  
in the display with light and shade reversed.  
Press the TUNE button, >.  
To deactivate the TA function:  
RDS Function  
Press the softkey, 4, indicating “TA”  
This device is equipped with an RDS radio  
receiver. Some FM stations transmit a signal  
in addition to the program itself containing  
information such as the name of the station  
and the type of program (PTY).  
again.  
Select Waveband/Memory Level  
This radio can receive FM and AM stations.  
Three memory levels are available for the FM  
waveband (FMI, FMII and FMT), and two  
memory levels for the AM waveband (M and  
MT).  
If RDS is activated, the station name is dis-  
played as soon as it is received.The program  
type can also be displayed if required. Read  
more about this in the section on “Program  
Type (PTY)”.  
Six stations can be stored in each memory  
level.  
Switching RDS on and off  
Selecting the waveband  
To use the RDS function:  
To switch between FM and AM:  
Press the TUNE button, >, when the  
Press the TUNE button, >, when the  
radio is operating.  
radio is operating.  
The radio function menu is shown on the dis-  
play.  
The radio function menu is shown on the dis-  
play.  
Press the softkey, 4, indicating “RDS”.  
Press the softkey, 4, indicating “BND”  
until the desired waveband is shown in  
the display.  
The RDS function is active if “RDS” is dis-  
played with light and shade reversed. When  
RDS is switched on or off, “RDS ONorRDS  
OFF” appears briefly in the display.  
To return to the basic radio menu  
Press the TUNE button, >, or wait for  
eight seconds. The settings are then  
saved.  
To return to the basic radio menu:  
Press the TUNE button, >, or wait for  
eight seconds. The settings are then  
saved.  
Selecting memory level  
To switch between the various memory lev-  
els (FMI, FMII, FMT, AM, AMT):  
Tuner Alternative  
Using theTA function (Tuner Alternative), the  
device automatically searches for the best fre-  
quency on which the current RDS station can  
be received.  
Press the softkey, 4, indicating “NEXT”  
until the desired memory level is shown  
in the display.  
The memory levels appear in the following  
order: FM I, FM II, FMT, M (AM), MT (AMT).  
13  
RADIO OPERATION  
Setting the station  
Saving a station  
There are a number of ways to set the sta-  
tion.  
Saving a station manually  
Choose the desired memory level: FM I,  
Automatic station search  
FM II, FMT, M or MT.  
Press the or button, 7.  
Tune in the desired station as described  
under “Setting the station”.  
The next station that can be received is tuned  
in.  
Hold down the softkey, 4, indicating  
the position [(“ST1” - “ST6”) where the  
station is to be stored] for longer than  
two seconds.  
Manual station tuning  
You can also tune to the station manually:  
Press the or button, 7.  
Saving a station automatically  
(Travelstore)  
You can also save the six strongest stations  
in the area automatically. This is done in the  
FMT and MT memory levels.  
Setting station search sensitivity  
You can choose whether to search only for  
stations with strong signals, or whether weak  
stations should be included:  
Select the waveband (AM or FM) to  
Note:  
which the setting should apply.  
Any stations previously saved on this level will  
be deleted.  
Press the MENU button, 8.  
To use the Travelstore function:  
Press the or button, 7, until “FM-  
SENS” or “AM-SENS” appears in the  
display.  
Press the TUNE button, >, when the  
radio is operating.  
Press the button or , 7.  
The radio function menu is shown on the dis-  
play.  
The current sensitivity value is shown on the  
display. SENS 6” indicates the maximum  
sensitivity for the reception of distant trans-  
mitters, and “SENS 1” indicates the lowest  
sensitivity.  
Press the softkey, 4, indicating “TS”.  
Storing starts.T-STORE” appears in the dis-  
play. When the procedure is complete, the  
station in memory location 1 on the FMT or  
MT level is played.  
Set the desired sensitivity by pressing  
or , 7.  
Going to a pre-set station  
Select the memory level or waveband.  
Press the OK button, 5, or the MENU  
button, 8, to leave the menu. The set-  
tings are then saved.  
Press the softkey, 4, indicating “ST1” -  
“ST6” for the desired station.  
14  
RADIO OPERATION  
Stop the SCAN, continue listening to a  
station  
Scanning through stations  
Scanning through available stations  
(Radio SCAN)  
Press any button on the arrow block,  
7.  
You can listen to short samples of all current-  
ly receivable stations.The length of the sam-  
ples can be set, in the menu, to between 5  
and 30 seconds.  
The scanning process is stopped, and the last  
station sampled continues playing.  
Setting sample duration  
(Scantime)  
Press the MENU button, 8.  
Start radio SCAN  
To start the radio scan:  
Press the TUNE button, >, when the  
Press the or button, 7, until  
radio is operating.  
“SCANTIME” appears in the display.  
The radio function menu is shown on the dis-  
play.  
Set the desired sampling time by press-  
ing or , 7.  
Press the softkey, 4, indicating “SCA”.  
Press the OK button, 5, or the MENU  
button, 8, to leave the menu. The set-  
tings are then saved.  
The scanning process starts.SCANappears  
briefly in the display, after which the current  
station name or the frequency is displayed,  
flashing.  
Note:  
The selected sample length also applies to  
scanning in CD, tape cassette, MiniDisc and  
CD changer mode (depending on how your  
device is equipped).  
Scan through the pre-set stations  
You can listen to short samples from all the  
stations saved on the various memory levels  
that can currently be received. The length of  
the samples can be set, in the menu, to be-  
tween 5 and 30 seconds.  
Program type (PTY)  
As well as the station name itself, some FM  
stations also supply information about the type  
of program being broadcast.This information  
can be received and displayed by your radio.  
Start pre-set SCAN  
To start the pre-set scan:  
Press the TUNE button, >, when the  
Such program types might include:  
radio is operating.  
CULTURE  
SPORT  
ROCK  
TRAVEL  
NEWS  
JAZZ  
POP  
The radio function menu is shown on the dis-  
play.  
CLASSICS  
Hold down the softkey, 4, indicating  
Using the PTY function, you can specifically  
select stations broadcasting a particular pro-  
gram type.  
“SCA” for longer than one second.  
The scanning process starts.SCANappears  
briefly in the display. The memory levels are  
scanned one after another, and the memory  
location from “ST1” to “ST6” currently being  
sampled is displayed with light and shade  
reversed.  
If you carry out a PTY search, but no match-  
ing station is found, the search will be contin-  
ued in the background.  
15  
RADIO OPERATION  
As soon as a station of the selected type is  
found, the device switches from the present  
station, or out of CD, cassette tape, MiniDisc  
or CD changer mode (depending on how your  
radio is equipped) to the station with the se-  
lected program type.  
Or  
Select a saved program type by press-  
ing one of the softkeys, 4, indicating  
“ST1” -”ST6".  
The selected program type is briefly displayed.  
In order to start the search:  
Activating PTY  
Press the or button, 7.  
To use the PTY function:  
The next receivable station with the selected  
program type is tuned in.  
Press the TUNE button, >, when the  
radio is operating.  
Note:  
The radio function menu is shown on the dis-  
play.  
If no station is found with the chosen program  
type, a beep is heard and the display briefly  
shows “NO PTY”. The tuner returns to the  
most recently received station.  
Press the softkey, 4, indicating “PTY”.  
When PTY is switched on, the display briefly  
shows the last program type that was select-  
ed. “PTY” appears in the display.  
Storing program type on station buttons  
Select a program type with the or  
To return to the basic radio menu:  
button, 7.  
Press the TUNE button, >, or wait for  
eight seconds. The settings are then  
saved.  
To save a program type, hold down one  
of the softkeys, 4, indicating “ST1” to  
“ST6”, for longer than one second.  
Deactivating PTY  
The program type is saved at the chosen lo-  
cation.  
Press the TUNE button, >, when the  
radio is operating.  
Optimising radio reception  
The radio function menu is shown on the dis-  
play. “PTY” appears in the display.  
Treble cut in the presence of interference  
(HICUT)  
Press the softkey, 4, indicating “PTY”.  
“PTY” disappears from the display.  
To return to the basic radio menu:  
The HICUT function improves the sound  
when radio reception is poor. When interfer-  
ence is being received, the treble is automat-  
ically cut which also reduces the level of in-  
terference.  
Press the TUNE button, >, or wait for  
eight seconds. The settings are then  
saved.  
Setting HICUT  
Selecting the program type and starting  
the search  
Press the MENU button, 8.  
Press the or button, 7, until “HI-  
Press the or button, 7.  
The current program type is shown on the  
display.  
CUT” appears in the display.  
Press the or buttons, 7, to adjust  
the HICUT function.  
To change to a different program type:  
“NO HICUT” means that the function is inac-  
tive, while “HICUT 3” indicates the strongest  
automatic reduction of treble and interference.  
Press the or button, 7, until the  
desired program type is displayed.  
16  
RADIO OPERATION  
Press the OK button, 5 or the MENU  
button, 8, to leave the menu. The set-  
tings are then saved.  
Changing information displayed  
You can select which information is shown  
on the display. The upper display line (the  
headline) can display the station name, fre-  
quency or program type. The lower display  
line (DOT field) can display the time or the  
memory level.  
Bandwidth selection in the presence of  
interference (SHARX)  
The SHARX function enables you to minimize  
interference from neighbouring stations.  
Switch on the SHARX function when stations  
are crowded.  
Changing the headline  
Hold down the DIS button, :, until the  
desired information is displayed, i.e. sta-  
tion name, frequency or program type.  
Switching SHARX on and off  
Press the MENU button, 8.  
Changing the DOT field  
Press the or button, 7, until  
Hold down the DIS button, :, for long-  
“SHARX” appears in the display.  
er than one second.  
Press the or buttons, 7, to switch  
The display switches between time and mem-  
ory level.  
SHARX on or off.  
“NO SHARX” means that the function is not  
active, while “SHARX ON” means that the  
bandwidth selection is operating automatical-  
ly.  
Setting the tuner  
You can set the tuner for use in the USA or  
Latin America.  
Press the OK button, 5 or the MENU  
button, 8, to leave the menu. The set-  
tings are then saved.  
Press the MENU button, 8.  
Press the or button, 7, until  
“TUNER” appears in the display.  
Switching between stereo and  
mono  
Press the or button, 7, to choose  
between “USA” and “LATIN”.  
When radio reception is poor, you can switch  
to mono mode. When first switched on, the  
radio always plays in stereo.The selection of  
stereo or mono is made via the menu.  
Press the OK button, 5 or the MENU  
button, 8, to leave the menu. The set-  
tings are then saved.  
Press the MENU button, 8.  
Press the or button, 7, until  
“STEREO” or “MONO” appears in the  
display.  
Press the or button, 7, to choose  
between stereo and mono.  
Press the OK button, 5 or the MENU  
button, 8, to leave the menu. The set-  
tings are then saved.  
17  
CD OPERATION  
CD operation  
You can play 12 cm-diameter commercial  
CDs on this device.  
Press the button on the opened control  
unit.  
The CD is ejected.  
Carefully remove the CD.  
So-called CD-Rs (“home-made” CDs) can  
also usually be played. However, because of  
the varying CD quality, Blaupunkt cannot  
guarantee correct function.  
Note:  
If you do not remove the CD within 30 sec-  
onds it will be drawn back into the drive.  
Rewritable CDs (CD-RWs) cannot be played!  
Selecting a track  
There is a risk of damaging the CD  
drive!  
Press one of the buttons in the arrow  
button group, 7, as often as needed  
for the number of the desired track to  
appear in the display.  
Neither CD singles with a diameter of 8  
cm nor non-circular “shape” CDs may be  
used.  
If the or button, 7, is pressed once the  
current track will be started again.  
No responsibility can be accepted for dam-  
age to the CD drive through the use of un-  
suitable CDs.  
Fast searching (audible)  
In order to search rapidly backwards or for-  
wards  
Starting CD operation and  
inserting the CD  
hold down one of the  
,
or but-  
If there is no CD in the drive  
tons, 7, until the fast search back-  
press the button, 1.  
wards of forwards starts.  
The control unit opens.  
Random Track Replay (MIX)  
Press the softkey, 4, indicating “MIX”.  
“MIX CD” appears briefly on the display. The  
next track to be played will be selected at ran-  
dom.  
Insert the CD with the printed side up-  
wards gently into the drive until you can  
feel some resistance.  
The CD is automatically drawn into the drive.  
As the CD is drawn in it must neither be held  
back nor supported.  
Ending MIX  
Press the softkey, 4, indicating “MIX”  
Close the control unit with gentle pres-  
again.  
sure until you feel it latch.  
“MIX OFF” appears briefly on the display.  
The CD menu is displayed, and the CD starts  
playing.  
Scanning tracks (SCAN)  
If there is already a CD in the drive  
You can hear a brief sample from all the tracks  
on the CD.  
press the CD button, <.  
The CD menu is displayed, and play begins  
from the point where it was last interrupted.  
Press the softkey, 4, indicating “SCA”.  
“SCAN” appears in the display.The tracks on  
the CD are played in ascending order.  
Removing the CD  
Press the  
button, 1.  
Note:  
The control unit opens to the front.  
The duration of the samples can be adjusted.  
18  
CD OPERATION  
For information on setting the sampling dura-  
tion, read the paragraphs on “Adjusting the  
Sample Duration” in the “Radio Operation”  
section.  
program the tracks in any order, but they will  
be played in ascending order.If favourite track  
play is active, only the tracks previously pro-  
grammed will be played from the CD that is in  
the drive. Up to 30 CDs with a maximum of  
40 tracks on each can be handled.  
Stopping the SCAN to continue listening  
to a track  
Programming favourite tracks  
Press the softkey, 4, indicating “SCA”  
Proceed as follows to program your favourite  
tracks on a CD:  
again.  
The track that is currently being sampled will  
continue to be played.  
Insert the CD for which you want to pro-  
gram your favourite tracks into the CD  
drive.  
Repeating tracks (REPEAT)  
Press the softkey, 4, indicating “RPT”.  
Select your first favourite track.  
The title will be repeated until RPT is deactiv-  
ated.  
Hold down the softkey, 4, indicating  
“TPM” for longer than one second.  
The track is accepted into the list of favourite  
tracks for this CD.  
Stopping REPEAT  
Press the softkey, 4, indicating “RPT”  
Continue in the same way for all the oth-  
again.  
er favourite tracks on the CD.  
Play continues as normal.  
Switching favourite track play on and off  
Changing the display contents  
You can choose between different display  
modes during CD operation:  
In order to begin playing the programmed fa-  
vourite tracks on the inserted CD, or to stop  
playing only the favourite tracks  
Display of track number and time.  
Display of track number and play time.  
Display of CD name and track number.  
briefly press the softkey, 4, indicating  
“TPM”.  
The current TPM status (“TPM ON” or “TPM  
OFF”) is briefly displayed.  
In order to change between the display  
modes, press the DIS button, :, as of-  
ten as you need for the desired informa-  
tion to be shown on the display.  
If favourite track play is active, “TPMappears  
on the display with light and shade reversed.  
Deleting titles from the list  
In order to remove individual entries from the  
programmed list of favourite tracks on a CD  
Note:  
It is only possible for a CD name to be dis-  
played if the inserted CD has been provided  
with a name. Read the section on “Naming  
CDs”.  
switch TPM on.  
Select the title that is to be deleted.  
Hold down the softkey, 4, indicating  
Programming favourite CD tracks  
“CLR” for about two seconds.  
You can use theTPM function (Track Program  
Memory) to program, save and replay your  
favourite tracks from a particular CD.You can  
“TRCK CLR” appears briefly on the display,  
and the track has been removed from the pro-  
grammed list.  
19  
CD OPERATION  
Delete the list of favourite tracks for a  
CD  
Use the  
/
buttons, 7, to select  
your character. If a location is to remain  
empty, select the underscore.  
You can delete the whole list of favourite tracks  
for a CD.The CD whose list of favourite tracks  
is to be deleted must be inserted.  
Use the or button, 7, to change  
the input location.  
switch TPM on.  
To save the name, press the MENU but-  
ton, 8.  
Hold down the softkey, 4, indicating  
“CLR” for about five seconds.  
Deleting a CD name  
“CD CLR” appears briefly on the display, and  
programming has been cleared.  
Listen to the CD whose name is to be  
deleted.  
Clearing all the lists of favourite titles  
from the device  
Press the MENU button, 8.  
Use the  
“UPDATE”.  
/
buttons, 7, to select  
You can delete all the programmed lists of  
favourite tracks for all CDs.  
Press the button, 7.  
“CLR DISC” appears in the display.  
A CD for which favourite tracks are pro-  
grammed must be inserted.  
Switch TPM on.  
Hold down the OK button, 5. After four  
seconds a beep is heard, and “DELET-  
ING” appears on the display.  
Hold down the softkey, 4, indicating  
“CLR” for about eight seconds.  
Release the OK button, 5.  
The CD name has been deleted.  
“ALL CLRappears briefly on the display, and  
all programmed lists have been cleared.  
Press the OK button, 5 or the MENU  
button, 8, to leave the menu. The set-  
tings are then saved.  
Naming CDs  
In order to recognise your CDs more effec-  
tively, the car radio allows you to give individ-  
ual names to up to 30 CDs.The names may  
have a maximum of eight characters.  
If you attempt to assign more than 30 names,  
the display will show “FULL.  
Deleting all CD names  
Listen to a CD.  
Press the MENU button, 8.  
Use the  
“UPDATE”.  
/
buttons, 7, to select  
Entering and changing CD names  
Listen to the CD that you want to name.  
Press the MENU button, 8.  
Press the button, 7.  
“CLR ALLappears in the display.  
Use the  
/
buttons, 7, to select  
Hold down the OK button, 5. After four  
seconds a beep is heard, and “DELET-  
ING” appears on the display.  
“CD NAME”.  
Press the or button, 7.  
The device enters edit mode. If your chosen  
CD is not yet named, eight underscores ap-  
pear in the display.  
Release the OK button 5.  
All CD names have been cleared.  
Press the OK button, 5 or the MENU  
button, 8, to leave the menu. The set-  
tings are then saved.  
The current entry location blinks.  
20  
CD CHANGER OPERATION  
Changing the display contents  
You can choose between different display  
modes during CD changer operation:  
CD changer operation  
(optional)  
On page 6 of this guide you can find which  
CD changers can be used with this device.  
You can also refer to your Blaupunkt dealer.  
Display of CD number, track number  
and time.  
Display of CD number, track number  
and playing time.  
Note:  
The operating instructions for your CD chang-  
er will provide information about handling  
CDs, inserting them and operating the CD  
changer.  
Display of CD name and track number.  
In order to change between the display  
modes, press the DIS button, :, as of-  
ten as you need for the desired informa-  
tion to be shown on the display.  
Starting CD changer operation  
Press the CDC button, =.  
Note:  
It is only possible for a CD name to be dis-  
played if the inserted CD has been provided  
with a name. Read the section on “Naming  
CDs”.  
The CD changer menu is displayed, and play  
will continue from the point where it was last  
interrupted. If the magazine is removed from  
the CD changer and re-inserted, play will start  
with the first track on the first CD detected by  
the CD changer.  
Repeat play of individual tracks or  
whole CDs (REPEAT)  
Press the softkey, 4, indicating “RPT”.  
Selecting a CD  
In order to change up or down to anoth-  
er CD, press the or button, 7, until  
the number of the CD you want appears  
on the display.  
“RPT TRCK” appears briefly on the display.  
In order to repeat play of the whole CD,  
press the softkey, 4, indicating “RPT”  
again.  
“RPT DISC” appears briefly on the display.  
Selecting a track  
In order to change up or down to anoth-  
er track on the current CD, press the  
or button, 7, until the number of the  
track you want appears on the display.  
Stopping REPEAT  
In order to stop repeating either the current  
track or the current CD  
press the softkey, 4, indicating “RPT” as  
often as necessary for the “RPT OFF” to  
be shown in the display.  
If the button, 7, is pressed once the cur-  
rent track is started again.  
Fast searching (audible)  
In order to search rapidly backwards or for-  
wards  
Playing tracks in random  
sequence (MIX)  
In order to play the tracks on the current CD  
in a random sequence  
hold down one of the or buttons,  
7, until the fast search backwards of  
forwards starts.  
press the softkey, 4, indicating “MIX”.  
“MIX CD” appears briefly on the display.  
21  
CD CHANGER OPERATION  
In order to play the tracks on all the inserted  
CDs in a random sequence  
If you attempt to assign more than 99 names,  
the display will show “FULL.  
press the softkey, 4, indicating “MIX”  
Entering and changing CD names  
again.  
Press the MENU button, 8.  
“MIX MAG” appears briefly on the display.  
Use the  
/
buttons, 7, to select  
“CDC NAME”.  
Note:  
The CDC A 08 and the IDC A 09 will make  
random selections from all the CDs and all  
the tracks in the changer. All other changers  
will first play through all the tracks of one CD  
at random before moving on to the next CD  
in the changer.  
Press the or button, 7.  
The device is now in selection mode.  
Choose the CD that you want to name  
with the  
/
buttons, 7.  
Press the or button, 7.  
Ending MIX  
The device enters edit mode. If your chosen  
CD is not yet named, seven underscores ap-  
pear in the display.  
Press the softkey, 4, indicating “MIX”  
as often as necessary for “MIX OFF” to  
be shown in the display.  
The current entry location blinks.  
Use the  
/
buttons, 7, to select  
Sampling all tracks on all CDs  
(SCAN)  
your characters. If a location is to re-  
main empty, select the underscore.  
In order to hear a short sample of all the tracks  
on all the inserted CDs in ascending order  
Use the or button, 7, to change  
the input location.  
press the softkey, 4, indicating “SCA”.  
“SCAN” appears in the display.  
Press the OK button, 5 or the MENU  
button, 8, to leave the menu. The set-  
tings are then saved.  
Ending SCAN  
Deleting a CD name  
In order to stop sampling the tracks  
Listen to the CD whose name is to be  
press the softkey, 4, indicating “SCA”  
again.  
deleted.  
The track that is currently being sampled will  
continue to be played.  
Press the MENU button, 8.  
Use the  
“UPDATE”.  
/
buttons, 7, to select  
Note:  
The duration of the samples can be adjusted.  
For information on setting the sampling dura-  
tion, read the paragraphs on “Adjusting the  
Sample Duration” in the “Radio Operation”  
section.  
Press the button, 7.  
“CD CLR” appears briefly on the display, af-  
ter which the CD name is shown.  
Hold down the OK button, 5.  
After four seconds “DELETING” appears on  
the display.  
Naming CDs  
In order to recognise your CDs more effec-  
tively, the car radio allows you to give individ-  
ual names to up to 99 CDs.The names may  
have a maximum of seven characters.  
Release the OK button 5.  
The CD name has been deleted.  
Press the MENU button, 8, or OK, 5.  
22  
CD CHANGER OPERATION  
Deleting all CD names  
Switching favourite track play on and off  
In order to begin playing the programmed  
favourite tracks on the inserted CD, or to stop  
playing only the favourite tracks  
Listen to a CD in CD changer mode.  
Press the MENU button, 8.  
Use the  
“UPDATE”.  
/
buttons, 7, to select  
briefly press the softkey, 4, indicating  
“TPM”.  
Press the button, 7.  
“CLR ALLappears in the display.  
The current TPM status (“TPM ON” or “TPM  
OFF”) is briefly displayed.  
If favourite track play is active, “TPMappears  
on the display with light and shade reversed.  
Hold down the OK button, 5.  
After four seconds “DELETING” appears on  
the display.  
Deleting titles from the list  
In order to remove individual entries from the  
programmed list of favourite tracks on a CD  
Release the OK button, 5.  
All CD names have been cleared.  
switch TPM on.  
Select the title that is to be deleted.  
Press the OK button, 5 or the MENU  
button, 8, to leave the menu. The set-  
tings are then saved.  
Hold down the softkey, 4, indicating  
“CLR” for about two seconds.  
Programming favourite CD tracks  
“TRCK CLR” appears briefly on the display,  
and the track has been removed from the pro-  
grammed list.  
You can use theTPM function (Track Program  
Memory) to program, save and replay your  
favourite tracks from a particular CD.You can  
program the tracks in any order, but they will  
be played in ascending order.If favourite track  
play is active, only the tracks previously pro-  
grammed will be played from the current CD.  
Up to 30 CDs with a maximum of 40 tracks  
on each can be handled.  
Deleting the list of favourite tracks for a  
CD  
You can delete the whole list of favourite tracks  
for a CD.The CD whose list of favourite tracks  
is to be deleted must be being played.  
Switch TPM on.  
Hold down the softkey, 4, indicating  
Programming favourite tracks  
“CLR” for about five seconds.  
Proceed as follows to program your favourite  
tracks on a CD:  
“CD CLR” appears briefly on the display, and  
programming has been cleared.  
Select the CD for which you want to pro-  
gram your favourite tracks in CD chan-  
ger operation.  
Clearing all the lists of favourite titles  
from the device  
You can delete all the programmed lists of  
favourite tracks for all CDs.  
Select your first favourite track.  
A CD for which favourite tracks are pro-  
grammed must be inserted.  
Hold down the softkey, 4, indicating  
“TPM” for longer than one second.  
The track is accepted into the list of favourite  
tracks for this CD.  
Switch TPM on.  
Hold down the softkey, 4, indicating  
Continue in the same way for all the oth-  
“CLR” for about eight seconds.  
er favourite tracks on the CD.  
“ALL CLRappears briefly on the display, and  
all programmed lists have been cleared.  
23  
TIME  
Adjust the minutes with the  
/
but-  
CLOCK - Time  
Setting the time  
The clock time can be automatically set by  
means of the RDS signal. If you cannot re-  
ceive an RDS station, or if the RDS station to  
which you are listening does not support this  
function, it is also possible to set the time  
manually.  
ton, 7.  
Press the OK button, 5 or the MENU  
button, 8, to leave the menu. The set-  
tings are then saved.  
Selecting 12/24-hour clock mode  
Press the MENU button, 8.  
Press the or button, 7, as often  
as is necessary for “24 H MODE” or “12  
H MODE” to appear in the display.  
Having the time set automatically  
In order to have the time set automati-  
cally, press the MENU button, 8.  
Press the or buttons, 7, to switch  
between the modes.  
Press the or button, 7, as often  
as is necessary for “CLK MAN” (manu-  
al) to appear in the display.  
Press the OK button, 5 or the MENU  
button, 8, to leave the menu. The set-  
tings are then saved.  
If “CLK AUTO” is displayed, automatic time  
setting is already active.  
Having the time displayed  
constantly when the device is  
switched off  
Press the button, 7, as often as is  
necessary for “CLK AUTO” to appear in  
the display.  
If you want the time to be displayed  
when the device is switched of and the  
ignition is switched on, press the MENU  
button 8.  
Press the OK button, 5 or the MENU  
button, 8, to leave the menu. The set-  
tings are then saved.  
If “CLK AUTO” has been selected and a sta-  
tion with the RDS time function (RDS-CT) is  
received, the clock is automatically adjusted.  
Press the or button, 7, as often  
as is necessary for “CLK OFF” or “CLK  
ON” to appear in the display.  
Setting the time manually  
Press the or button, 7, to switch  
In order to adjust the time, press the  
between the display being ON or OFF.  
MENU button, 8.  
Press the OK button, 5 or the MENU  
button, 8, to leave the menu. The set-  
tings are then saved.  
Press the or button, 7, as often  
as is necessary for “CLOCKSET” to ap-  
pear in the display.  
Press the or button, 7.  
The time is shown on the display. The hours  
blink and can be adjusted.  
Adjust the hours with the  
/
button,  
7.  
When the hours have been set, press  
the button, 7.  
The minutes blink.  
24  
EQUALIZER  
Adjusting the equalizer  
Press the DEQ button, 6.  
Equalizer  
This device has a parametric digital equaliz-  
er.In this case, parametric means that in each  
of the three filters, one individual frequency  
can be emphasised or reduced (with a gain  
of +8 to -8 dB).  
Select the “LOW EQ”, “MID EQ” or  
“HIGH EQ” filter with the or button,  
7.  
To select the frequency, press the or  
The following filters are available:  
button, 7.  
LOW EQ  
MID EQ  
HIGH EQ  
32 - 200 Hz  
Adjust the level with the or key, 7.  
250- 1,600 Hz  
2,000 - 12,500 Hz  
In order to select the next filter, first  
press the OK button, 5, then the or  
button, 7.  
These filters can be set without using any  
measuring instruments. It allows the sound  
properties in the vehicle to be significantly  
affected.  
When you have completed all the set-  
tings, press the DEQ button, 6.  
Adjusting the sharpness of the  
filter  
Press the DEQ button, 6.  
Adjustment instructions  
When setting the equalizer, we recommend  
you use a CD, cassette or MiniDisc (depend-  
ing on your car radio) which you are familiar  
with.  
Select the adjustments for the sharp-  
ness of the individual filters “LO-Q-FAC”,  
“MI-Q-FAC” or “HI-Q-FAC” with the or  
button, 7.  
Before making any adjustments to the equal-  
izer zero the tone settings and deactivate the  
loudness.For more information, read the sec-  
tion on “Tone and volume”.  
To adjust the sharpness of the filter,  
press the or button, 7.  
Listen to a CD, tape cassette or Mini-  
Disc (according to how the radio is  
equipped).  
In order to select the next filter, first  
press the OK button, 5, then the or  
button, 7.  
Compare the sound you hear with how  
When you have completed all the set-  
you feel it should be.  
tings, press the DEQ button, 6.  
Now consult the “Equalizer adjustment  
Selecting the tone preset  
guide” table for “Tone impression”.  
You can choose preset tone settings for the  
following musical styles.  
Adjust the equalizer values as de-  
scribed under “Action”.  
ROCK  
Switching the equalizer on and  
off  
DISCO  
JAZZ  
To switch off the equalizer, press the  
CLASSIC  
VOCAL  
DEQ button, 6.  
“LOW EQ” is shown on the display.  
Settings for these styles have already been  
programmed.  
To switch off the equalizer, hold down  
the DEQ button, 6 until “DEQ OFF”  
briefly appears.  
Press the DEQ button, 6.  
25  
EQUALIZER  
Switching the spectrometer on and off  
Press the MENU button, 8.  
“MENU” appears in the display.  
Select “PRESET” with the or but-  
ton, 7.  
To select the preset tone, press the or  
button, 7.  
Press the or button, 7, as often  
as is necessary for “PEAK ON” or  
Press the OK button, 5.  
“PEAK OFF” to appear in the display.  
When you have completed all the set-  
tings, press the DEQ button, 6.  
Press the or buttons, 7, in order  
to switch the spectrometer on or off.  
Level meter / Spectrometer  
While you set the equalizer, the level meter in  
the display gives you a symbolic indication of  
volume and settings.  
Press the OK button, 5 or the MENU  
button, 8, to leave the menu. The set-  
tings are then saved.  
At other times, the level meter can be switched  
to spectrometer display mode.  
Equalizer adjustment guide  
Tone impression/problem  
Action  
Bass too quiet  
Bass boost with  
Filter: “LOW EQ”  
Frequency: 50 to 100 Hz  
Level :+4 to +6 dB  
Bass sounds muddy  
Booming tone  
Unpleasant pressure  
Reduce lower middle tones with  
Filters: “LOW EQ”, “MID EQ”  
Frequency: 125 to 400 Hz  
Level : approx. -4 dB  
Tone lacks depth,  
is aggressive, no stereo effect.  
Reduce middle tones with  
Filters: “MID EQ”, “HIGH EQ”  
Frequency: 1,000 to 2,500 Hz  
Level : -4 to -6 dB  
Muffled tone  
Lack of clarity  
Boost treble tones with  
Filter: “HIGH EQ”  
Instruments have no brightness  
Frequency: approx. 12,500 Hz  
Level : +2 to +4 dB  
26  
PRE-AMPLIFIER / SUBOUT  
Pre-amplifier / subout  
You can use the connections provided on your  
car radio to connect an external pre-amplifier  
and a subwoofer.  
EXTERNAL AUDIO SOURCES  
External audio sources  
Instead of the CD-changer, you can connect  
an external audio source with line output.  
Such sources might be a portable CD player,  
a MiniDisc player or an MP3 player.  
The AUX input must be switched on in the  
menu.  
We recommend that you use matching prod-  
ucts from the Blaupunkt or Velocity ranges.  
Switch-on delay for external pre-  
amplifiers  
To prevent speakers from crackling when you  
switch on the player, you can set a switch-on  
delay for all amplifiers connected to the Pre-  
amp Out connection. The maximum delay is  
four seconds.  
You need an adapter cable to connect an ex-  
ternal audio source. You can obtain such a  
cable from your Blaupunkt dealer.  
Switching the AUX input on and  
off  
Press the MENU button, 8.  
Press the MENU button, 8.  
Press the button, 7, as often as is  
necessary for “AUX OFF” or “AUX ON”  
to appear in the display.  
Press the or button, 7, as often  
as is necessary for “AMP DLAY” to ap-  
pear in the display.  
If “AUX ON” is displayed, the input has al-  
ready been switched on.  
Press the or buttons, 7, in order  
Press the or buttons, 7, in order  
to adjust the switch-on delay.  
to switch AUX on or off.  
“DLAY OFF” means that there is no switch-  
on delay, while “DELAY 1” to “DELAY 4” indi-  
cate the delay time in seconds.  
Press the OK button, 5 or the MENU  
button, 8, to leave the menu. The set-  
tings are then saved.  
Press the OK button, 5 or the MENU  
button, 8, to leave the menu. The set-  
tings are then saved.  
Note:  
If the AUX input is switched on it can be se-  
lected with the CDC button, =.  
27  
TECHNICAL DATA  
Technical data  
Amplifier  
Output power:  
4 x 25 Watt sine wave  
according to  
DIN 45 324 at 14. 4 V  
4 x 45 Watt max. power  
Tuner  
Wavebands:  
FM :  
AM :  
87.5 – 107.9 MHz  
530 – 1,710 kHz  
FM frequency response:  
30 - 15,000 Hz  
CD  
Frequency response:  
20 - 20,000 Hz  
Pre-amp Out  
4 channels:  
4 V / 10 k  
AUX input  
Sensitivity:  
1,2 V / 10 kΩ  
Subject to technical change!  
28  
Service numbers / Numéros du service après-vente /  
Números de servicio / Número de serviço  
Tel.:  
Fax:  
Deutschland  
Belgique / België  
France  
Nederland  
Great Britain  
Ireland  
Danmark  
Sverige  
Norge  
0 18 05 00 02 25  
02.525. 54.44  
014 010 70 07  
023 565 63 48  
018 958 383 66  
(01) 4149400  
44 89 83 60  
0 51 21 49 40 02  
02.525.54.48  
014 010 73 20  
023 565 63 31  
018 958 383 94  
(01) 4598830  
44 89 86 44  
08 750 15 00  
66 81 70 00  
08 750 18 10  
66 81 71 57  
Suomi  
Österreich  
094 359 91  
01 610 39 0  
015 762 241  
094 359 92 36  
01 610 39 391  
015 769 473  
âeská republika  
USA  
Singapore  
Slovensko  
026 130 04 41  
800-266 25 28  
006 535 054 47  
042 175 873 212  
026 130 05 14  
708-681 71 88  
006 535 053 12  
042 175 873 229  
Blaupunkt-Werke GmbH  
Bosch Gruppe  
09/00 TRO  
K7/VKD 8 622 402 515  

Audio Power DSP System Multiface User Manual
BMW MOTORRAD K 1200 S User Manual
Boston Acoustics GTA 504 User Manual
Campbell Hausfeld DH3200 User Manual
Cuisinart SPB 6C User Manual
Elta 7537N1 User Manual
Ford 95 5025 User Manual
Hamilton Beach Blender HBB908 User Manual
Ikelite Canon 6090 User Manual
JVC GR AXM70 User Manual