Blaupunkt HEIDELBERG CD51 User Manual

Radio / CD  
Miami Beach CD51  
Tampa Bay CD51  
Operating instructions  
2
6
4
1
3
7
8
9
5
11 10  
13 12  
16 15  
14  
3
CONTROLS  
1
button – to unlock the  
removable control panel (release  
panel)  
;
OK button – confirms menu  
entries and starts the scan func-  
tion  
2
3
Volume control  
Button – switches the unit on/off,  
volume mute  
FM button – selects the radio  
mode source,  
selects the FM memory levels  
<
=
X-BASS button – to set the  
X-Bass feature  
AUDIO button (audio) – adjusts  
the bass, treble, balance and  
fader  
Keys 1 - 6  
TS button – starts the Travel-  
4
5
>
?
AM button – selects the radio  
mode source,  
store function  
selects the AM frequency range  
Display  
button – displays the time,  
DIS – changes the display con-  
tent  
@
CD•C button – to switch be-  
tween CD, CD changer (if con-  
nected) and AUX sources  
6
7
8
9
:
MENU button – opens the basic  
settings menu  
button – opens the flip-  
release panel  
Arrow buttons  
4
TABLE OF CONTENTS  
Scanning tracks (SCAN) ............... 14  
Repeating tracks (REPEAT) ........... 14  
Pausing playback (PAUSE)............ 14  
Changing the display ..................... 15  
Ejecting a CD................................ 15  
Notes and accessories ............ 6  
Road safety ..................................... 6  
Installation ....................................... 6  
Accessories .................................... 6  
International telephone information... 6  
CD changer mode.................. 15  
Switching to CD changer mode..... 15  
Selecting a CD.............................. 15  
Selecting tracks ............................ 15  
Quick track selection ..................... 15  
Fast searching (audible) ................ 15  
Changing the display ..................... 16  
Repeating individual tracks or  
whole CDs (REPEAT).................... 16  
Random play (MIX) ........................ 16  
Scanning all tracks on all CDs  
(SCAN) ......................................... 16  
Pausing playback (PAUSE)............ 17  
Removable control panel ......... 7  
Switching on/off ...................... 8  
Adjusting the volume ............... 9  
Setting the power-on volume ........... 9  
Instantaneous volume reduction  
(mute) ............................................. 9  
Telephone audio / navigation audio .. 9  
Setting the volume of the  
confirmation beep.......................... 10  
Radio mode............................ 11  
Switching to radio mode ................ 11  
Selecting the frequency range /  
memory ......................................... 11  
Tuning into a station ....................... 11  
Storing stations ............................. 11  
Storing stations automatically  
(Travelstore) .................................. 12  
Listening to preset stations ............ 12  
Scanning receivable stations  
(SCAN) ......................................... 12  
Setting the scantime ...................... 12  
Tuner configuration ........................ 12  
CLOCK - Time ........................ 17  
Sound and  
volume distribution settings .. 19  
Adjusting the bass settings ............ 19  
Adjusting the treble settings........... 19  
Setting the left/right volume  
distribution (balance) ..................... 19  
Setting the front/back volume  
distribution (fader) ......................... 19  
Setting the display ......................... 13 X-BASS .................................. 20  
CD mode ................................ 13 Setting the spectrometer....... 20  
Switching to CD mode .................. 13  
Selecting tracks ............................ 14  
Quick track selection ..................... 14  
External audio sources .......... 21  
Specifications ........................ 21  
Fast searching (audible) ................ 14  
Random play (MIX) ........................ 14  
Guarantee .............................. 22  
Installation instructions .......... 80  
5
NOTES AND ACCESSORIES  
Thank you for deciding to purchase a  
Accessories  
Only use accessories approved by Blau-  
punkt.  
Blaupunkt product. We hope you enjoy  
using this new piece of equipment.  
Before using the device for the first time,  
please read these instructions careful- Remote control  
ly. The Blaupunkt editors are constant-  
The optional RC08 or RC10 remote  
ly working on making the operating in-  
structions clearer and easier to under-  
stand. However, if you still have any  
questions on how to operate the unit  
please contact your dealer or the tele-  
phone hotline for your country. You will  
find the hotline telephone numbers print-  
ed at the back of this booklet.  
controls allow you to safely and conve-  
niently access the most important func-  
tions of your car radio from your steer-  
ing wheel.  
The RC 06 H remote control is supplied  
with the Tampa Bay CD51.  
Amplifier  
All Blaupunkt amplifiers can be used.  
Road safety  
CD changer  
Road safety has absolute prior-  
ity. Only operate your car radio if the  
road and traffic conditions allow you  
to do so. Familiarise yourself with the  
unit before setting off on your jour-  
ney.  
You should always be able to hear  
police, fire and ambulance sirens  
from afar. For this reason, set the  
volume of whatever you are listen-  
ing to to a reasonable level.  
You can connect the following Blaupunkt  
CD changers:  
CDC A 06, CDC A 08, CDC A 072 and  
IDC A09.  
You can also connect the CDC A05 and  
CDC A 071 CD changers by using an  
adapter cable (Blaupunkt no.: 7 607 889  
093).  
International telephone  
information  
Installation  
If you have any questions regarding the  
operation of your car radio or if you re-  
quire further information, please do not  
hesitate to call us!  
The information hotline numbers are  
printed on the last page of these instruc-  
tions.  
If you want to install your car radio your-  
self, please read the installation and  
connection instructions that follow these  
operating instructions.  
6
REMOVABLE CONTROL PANEL  
Press the  
button 1.  
Removable control panel  
The control panel locking mechanism  
opens.  
Theft protection  
As a way of protecting your car radio  
against theft, the unit is equipped with  
a removable control panel (flip-release  
panel). Without this control panel, the  
car radio is worthless to a thief.  
Protect your car radio against theft by  
taking the control panel with you every  
time you leave your vehicle. Do not  
leave the control panel in your vehicle -  
not even in a hiding place.  
First, pull the control panel straight  
off the unit and then out towards  
the left.  
The unit switches off after the con-  
trol panel is removed.  
All the current settings are saved.  
Any CD already inserted in the unit  
remains there.  
The control panel has been designed  
to be easy to use.  
Attaching the control panel  
Slide the control panel from left to  
right into the unit’s panel locking  
mechanism.  
Note:  
Never drop the control panel.  
Never expose the control panel  
to direct sunlight or other heat  
sources.  
Press the left-hand edge of the  
control panel into the unit until it  
clicks into place.  
Store the control panel in the sup-  
plied case.  
Avoid making direct skin contact  
with the control panel’s contacts. If  
necessary, clean the contacts with  
a lint-free cloth soaked in cleaning  
spirits.  
Removing the control panel  
Note:  
When attaching the control panel,  
make sure you do not press the  
display.  
1
If the unit was still switched on when  
you removed the control panel, the unit  
will automatically switch on with the last  
settings activated (i.e. radio, CD, CD  
changer, or AUX) when the panel is re-  
placed.  
7
SWITCHING ON/OFF  
Switching on/off  
There are various ways of switching the  
unit on/off:  
Switching on by inserting a CD  
If the unit is switched off and there is no  
CD inserted in the drive,  
press the  
button 9.  
Switching on/off using the vehicle  
ignition  
The flip-release panel opens.  
Gently insert the CD with the print-  
ed side uppermost into the drive  
until you feel some resistance.  
If the unit is correctly connected to the  
vehicle’s ignition and it was not switched  
off using button 3, it will switch on/off  
simultaneously with the ignition.  
The CD will be drawn automatically into  
You can switch the unit on even if the the drive.  
ignition is off:  
You must not hinder or assist the drive  
as it draws in the CD.  
To do so, press button 3.  
Gently close the control panel  
whilst exerting a little pressure until  
you feel it click into place.  
Note:  
To protect the vehicle battery, the  
unit will switch off automatically af-  
ter one hour if the ignition is off.  
The unit switches on. CD playback be-  
gins.  
Switching on/off using the  
removable control panel  
Remove the control panel.  
The unit switches off.  
Attach the control panel again.  
The unit switches on. The last settings  
(radio, CD, CD changer orAUX) will be  
reactivated.  
Switching on/off using button 3  
To switch the unit on, press button  
3.  
To switch the unit off, press button  
3 for longer than two seconds.  
The unit switches off.  
8
ADJUSTING THE VOLUME  
Instantaneous volume reduction  
(mute)  
This feature allows you to instanta-  
neously reduce (mute) the volume to a  
level preset by you.  
Adjusting the volume  
The volume can be adjusted in steps  
from 0 (off) to 66 (maximum).  
To increase the volume, turn the  
volume control 2 to the right.  
Briefly press button 3.  
To decrease the volume, turn the  
“MUTE” appears in the display.  
volume control 2 to the left.  
Setting the mute level  
Setting the power-on volume  
You can set the unit’s mute volume lev-  
el.  
You can set the unit’s default power-on  
volume.  
Press the MENU button 8.  
Press the MENU button 8.  
Keep pressing the or button  
: until “MUTE LEVEL” appears in  
the display.  
Keep pressing the or button  
: until “ON VOLUME” appears in  
the display.  
Set the mute level using the and  
Set the power-on volume using the  
buttons :.  
and buttons :.  
When you have finished making your  
changes,  
If you change the setting to “0”, the pow-  
er-on volume will be the same as the  
volume level that was set before the unit  
was last switched off.  
press the MENU button 8 or OK  
; twice.  
Note:  
Telephone audio / navigation  
audio  
To protect your hearing, the power-  
on volume is limited to a value of  
“38”. If the volume level was higher  
when the unit was switched off, the  
volume will be reset to “38” when  
the unit is switched on again.  
If your car radio is connected to a mo-  
bile telephone or a navigation system,  
the unit’s volume will be muted as soon  
as you “pick up” the telephone or as  
soon as a navigation announcement is  
made. The caller or voice output will  
then be heard over the car radio loud-  
speakers. In order for this to work, the  
mobile telephone or navigation system  
must be connected to the car radio in  
the manner described in the installation  
instructions.  
When you have finished making your  
changes,  
press the MENU button 8 or OK  
; twice.  
9
ADJUSTING THE VOLUME  
You can find out from your Blaupunkt  
dealer which navigation systems can be  
used with your car radio.  
Set the volume using the and  
buttons :. “0” means beep off, “9”  
means maximum beep volume.  
You can set the volume level at which  
telephone calls and the navigation voice  
output will first be heard.  
When you have finished making your  
changes,  
press the MENU button 8 or OK  
Press the MENU button 8.  
;.  
Keep pressing the or button  
: until “TEL/NAVI VOL” appears  
in the display.  
Set the required volume using the  
and buttons :.  
When you have finished making your  
changes,  
press the MENU button 8 or OK  
; twice.  
Note:  
Using the volume control 2, you  
can directly adjust the volume of  
telephone calls and navigation  
voice output (whilst they are being  
heard).  
Setting the volume of the  
confirmation beep  
For some functions you will hear a con-  
firmation beep if you keep a button  
pressed for longer than two seconds.  
For instance, after storing a radio sta-  
tion to a station button you will hear a  
confirmation beep. You can set the vol-  
ume of this beep.  
Press the MENU button 8.  
Keep pressing the or button  
: until “BEEP” appears in the dis-  
play.  
10  
RADIO MODE  
Setting the sensitivity for station  
seek tuning  
Radio mode  
Switching to radio mode  
If you are in CD, CD changer or AUX  
mode,  
You can configure the radio to only tune  
into stations with a strong reception or  
to also tune into those with a weak re-  
ception.  
press the FM 4 / AM 5 button  
Press the MENU button 8.  
or  
Keep pressing the or button  
: until “SENS HI” or “SENS LO”  
appears in the display.  
keep pressing the CD•C button @  
until “RADIO” appears in the dis-  
play.  
“SENS HI” means that the tuner is highly  
sensitive. “SENS LO” means it is set to  
the lowest sensitivity setting. If “SENS  
LO” is selected, “lo” lights up in the dis-  
play.  
Selecting the frequency range /  
memory  
This unit can receive programmes  
broadcast over the FM andAM frequen-  
cy ranges.There are three preset mem-  
ory levels for the FM range and one for  
theAM range. Six stations can be stored  
on each memory level.  
Set the required sensitivity using  
the and buttons :.  
When you have finished making your  
changes,  
Selecting the FM memory level  
press the MENU button 8 or OK  
Press the FM button 4 to switch  
between the FM memory levels  
(FM1, FM2 and FMT).  
;.  
Tuning into stations manually  
You can also tune into stations manually.  
Press the or button :.  
Selecting the AM frequency range  
Press the AM button 5 to select  
the AM frequency range.  
Storing stations  
Tuning into a station  
Storing stations manually  
There are various ways of tuning into a  
station.  
Select the required memory level  
(FM1, FM2 or FMT) or the AM fre-  
quency range.  
Automatic seek tuning  
Tune into the station.  
Press the or button :.  
Press one of the station buttons 1-  
6 > for longer than one second to  
store the station to that button.  
The unit tunes into the next receivable  
station.  
11  
RADIO MODE  
Stopping SCAN and continuing  
listening to a station  
Storing stations automatically  
(Travelstore)  
Press the OK button ;.  
Scanning is stopped and the station that  
was tuned into last will remain active.  
You can automatically store the six sta-  
tions with the strongest reception in the  
region. The stations are stored in the  
FMT or AM memory depending on the  
selected frequency range.  
Setting the scantime  
Press the MENU button 8.  
Note:  
Stations that were previously  
stored in this memory are deleted  
in the process.  
Keep pressing the or button  
: until “SCANTIME” appears in  
the display.  
Briefly press the TS button ?.  
Set the required scantime using  
the and buttons :.  
The station storing procedure begins.  
“TRAVEL-STORE” appears in the dis-  
play.After the process is completed, the  
station that is stored in location 1 of the  
respective memory level will be played.  
When you have finished making your  
changes,  
press the MENU button 8 or OK  
; twice.  
Listening to preset stations  
Note:  
Select the memory level on which  
The set scantime also applies to  
scanning in CD and CD changer  
mode.  
the station was stored.  
Press the preset station button 1-6  
> of the station you want to listen  
to.  
Tuner configuration  
This unit is equipped with a multiband  
tuner. The tuner can be configured to  
suit the requirements that are specific  
to various countries. The countries/re-  
gions available are: America, Europe,  
Asia and Thailand. The tuner will only  
function optimally if it is configured for  
the country/region in which the unit is  
being operated.  
Scanning receivable stations  
(SCAN)  
You can briefly play all the receivable  
stations. You can set the scanning time  
to between 5 and 30 seconds in the  
menu.  
Starting SCAN  
Keep the OK button ; pressed  
Configuring the tuner  
until the scan process starts.  
Press the MENU button 8.  
“SCAN” appears briefly in the display  
followed by the current frequency (which  
flashes).  
Keep pressing the or button  
: until “FM TUNER” appears in  
the display.  
12  
RADIO MODE  
CD MODE  
Press the or button : to set  
CD mode  
You can use this unit to play standard  
CDs with a diameter of 5 inches.  
the country/region.  
When you have finished making your  
changes,  
Risk of damage to the CD drive!  
CD singles with a diameter of 3 inch-  
es and contoured CDs (shape CDs)  
are not suitable for playback in this  
unit.  
We accept no liability for any dam-  
age to the CD drive that may occur  
as a result of the use of unsuitable  
CDs.  
press the MENU button 8 or OK  
; twice.  
Note:  
Once you have configured the tun-  
er, the unit will switch to radio  
mode and tune into the preset fre-  
quency 87.5 MHz  
Setting the display  
Switching to CD mode  
If there is no CD inserted in the  
In radio mode, you have the option of  
continuously displaying the time or con-  
tinuously displaying the frequency.  
drive,  
Keep the  
/ DIS button 7  
pressed until the required display  
press the  
The flip-release panel opens.  
button 9.  
appears.  
Gently insert the CD with the print-  
ed side uppermost into the drive  
until you feel some resistance.  
The CD is drawn into the drive automat-  
ically.  
You must not hinder or assist the drive  
as it draws in the CD.  
Gently close the control panel  
whilst exerting a little pressure until  
you feel it click into place.  
CD playback begins.  
If a CD is already inserted in the  
drive.  
Keep pressing the CD•C button @  
until “CD” appears in the display.  
Playback begins from the point at which  
it was last interrupted.  
13  
CD MODE  
Note:  
Selecting tracks  
You can set the scantime. For fur-  
ther details, please read the sec-  
tion entitled “Setting the scantime”  
in the “Radio mode” chapter.  
Press one of the arrow buttons :  
to select the next or previous track.  
If you press the or button : once,  
the current track will be played again  
from the beginning.  
Stopping SCAN and continuing  
playback  
Quick track selection  
To quickly select tracks backwards or  
forwards,  
To stop scanning, press the OK  
button ;.  
The current track will then continue to  
be played.  
keep one of the or buttons :  
pressed until fast-reverse / fast-for-  
ward track selection begins.  
Repeating tracks (REPEAT)  
If you want to repeat a track, press  
Fast searching (audible)  
To fast search backwards or forwards,  
button 4 RPT >.  
“REPEAT TRCK” appears briefly in the  
display and the RPT symbol lights up.  
The track is repeated until you deacti-  
vate RPT.  
keep one of the  
buttons :  
pressed until fast reversing / fast  
forwarding begins.  
Random play (MIX)  
Cancelling repeat  
Press button 5 MIX >.  
If you want to stop the repeat func-  
tion, press button 4 RPT > again.  
“MIX CD” appears briefly in the display  
and the MIX symbol lights up. The next “REPEAT OFF” appears briefly in the  
randomly selected track will then be display and the RPT symbol disappears.  
played.  
Normal playback is then continued.  
Stopping MIX  
Pausing playback (PAUSE)  
Press button 3 >.  
Press button 5 MIX > again.  
“MIX OFF” appears briefly in the dis-  
play and the MIX symbol disappears.  
“PAUSE” appears in the display.  
Cancelling pause  
Scanning tracks (SCAN)  
You can briefly play all the tracks on a  
CD.  
Press button 3 > while in  
pause mode.  
Playback is continued.  
Press the OK button ; for longer  
than two seconds. The next track  
will then be played briefly.  
14  
CD MODE  
CD CHANGER MODE  
Changing the display  
CD changer mode  
To switch between the track num-  
ber and clock display / track num-  
ber and playing time display, press  
Note:  
Information on handling CDs, in-  
serting CDs and operating the CD  
changer can be found in the oper-  
ating instructions supplied with  
your CD changer.  
the  
/ DIS button 7 once or sev-  
eral times for longer than two sec-  
onds until the required display ap-  
pears.  
Switching to CD changer mode  
Ejecting a CD  
Keep pressing the CD•C button @  
until “CHANGER” appears in the  
display.  
Press the  
button (9).  
The flip-release panel opens and the CD  
is ejected.  
Playback begins with the first CD that  
the CD changer detects.  
Remove the CD and close the con-  
trol panel.  
Selecting a CD  
To move up/down from one CD to  
another, press the or button  
: once or several times.  
Selecting tracks  
To move up/down from one track to  
another on the current CD, press  
the or button : once or sev-  
eral times.  
Quick track selection  
To quickly select tracks backwards or  
forwards,  
keep one of the or buttons :  
pressed until fast-reverse / fast-for-  
ward track selection begins.  
Fast searching (audible)  
To fast search backwards or forwards,  
keep one of the  
buttons :  
pressed until fast reversing / fast  
forwarding begins.  
15  
CD CHANGER MODE  
“MIXALL” appears briefly and MIX lights  
up in the display.  
Changing the display  
To switch between the track num-  
ber and clock display / track num-  
ber and playing time display / CD  
number and track number display,  
press the / DIS button 7 once  
or several times for longer than two  
seconds until the required display  
appears.  
Note:  
In the case of the CDC A 08 and  
the IDC A 09, all the CDs in the  
changer are selected randomly. In  
the case of any other changer, all  
the tracks on one CD are played  
randomly before the next CD in the  
changer is played.  
Repeating individual tracks or  
whole CDs (REPEAT)  
If you wish to repeat the current  
track, briefly press button 4 RPT  
>.  
Stopping MIX  
Press button 5 MIX > until  
“MIX OFF” appears briefly in the  
display and MIX disappears.  
Scanning all tracks on all CDs  
(SCAN)  
“REPEAT TRCK” appears briefly and  
RPT lights up in the display.  
If you wish to repeat the current  
To briefly play all the tracks on all  
inserted CDs in ascending order,  
press the OK button ; for longer  
than two seconds.  
CD, press button 4 RPT > again.  
“REPEAT DISC” appears briefly and  
RPT lights up in the display.  
“SCAN” appears in the display.  
Cancelling repeat  
Stopping SCAN  
If you want to stop the repeat func-  
tion for the current track or CD,  
press button 4 RPT > until  
To stop scanning, briefly press the  
OK button ;.  
“REPEAT OFF” appears briefly in  
the display and RPT disappears.  
The current track will then continue to  
be played.  
Random play (MIX)  
Note:  
You can set the scantime. For fur-  
ther details, please read the sec-  
tion entitled “Setting the scantime”  
in the “Radio mode” chapter.  
To play all the tracks on the current  
CD in random order, briefly press  
button 5 MIX >.  
“MIX CD” appears briefly and MIX lights  
up in the display.  
To play the tracks on all the insert-  
ed CDs in random order, press but-  
ton 5 MIX > again.  
16  
CD CHANGER MODE  
CLOCK - TIME  
Pausing playback (PAUSE)  
CLOCK - Time  
Press button 3 >.  
“PAUSE” appears in the display.  
Briefly displaying the time  
To display the time, briefly press  
the  
/ DIS button 7.  
Cancelling pause  
Press button 3 > while in  
Setting the time  
pause mode.  
Setting the time manually  
Playback is continued.  
To set the time, press the MENU  
button 8.  
Keep pressing the or button  
: until “CLOCKSET” appears in  
the display.  
Press the button :.  
The time appears in the display. The  
minutes flash on and off and can be  
adjusted.  
Adjust the minutes using the  
buttons :.  
Once you have set the minutes,  
press the button :. The hours  
start flashing.  
Adjust the hours using the  
buttons :.  
Press the MENU button 8 or OK  
; twice.  
17  
CLOCK - TIME  
Selecting 12/24-hour clock  
mode  
Briefly displaying the time when  
the unit is switched off  
To briefly display the time when the unit  
is off,  
Press the MENU button 8.  
“MENU” appears in the display.  
press the  
/ DIS button 7.  
Keep pressing the or button  
: until “24 H MODE” or “12 H  
MODE” appears in the display.  
The time is displayed for eight seconds.  
Press the or button : to  
switch between the modes.  
When you have finished making your  
changes,  
press the MENU button 8 or OK  
;.  
Displaying the time continuously  
when the unit is off and the  
ignition is on  
To display the time when the unit is off  
and the vehicle ignition is on,  
press the MENU button 8.  
Keep pressing the or button  
: until “CLK DISP OFF” or “CLK  
DISP ON” appears in the display.  
Press the or button : to  
switch between the ON/OFF set-  
tings.  
When you have finished making your  
changes,  
press the MENU button 8 or OK  
;.  
18  
SOUND AND VOLUME DISTRIBUTION SETTINGS  
Setting the left/right volume  
distribution (balance)  
Sound and volume  
distribution settings  
To set the left/right volume distribu-  
tion (balance), press the AUDIO  
button =.  
You can adjust the sound and volume  
distribution settings separately for each  
source (radio, CD, CD changer and  
AUX).  
“BASS” appears in the display.  
Keep pressing the button : un-  
til “BALANCE” appears in the dis-  
play.  
Adjusting the bass settings  
Press the AUDIO button =.  
“BASS” appears in the display.  
Press the or button : to  
Press the or button : to ad-  
adjust the balance (right/left).  
just the bass.  
When you have finished making your  
changes,  
When you have finished making your  
changes,  
press the AUDIO button =.  
press the AUDIO button =.  
Setting the front/back volume  
distribution (fader)  
Adjusting the treble settings  
Press the AUDIO button =.  
“BASS” appears in the display.  
To set the front/back volume distri-  
bution (fader), press the AUDIO  
button =.  
Keep pressing the button :  
until “TREBLE” appears in the dis-  
play.  
“BASS” appears in the display.  
Keep pressing the button : un-  
Press the or button : to ad-  
til “FADER” appears in the display.  
just the treble.  
Press the or button : to ad-  
When you have finished making your  
changes,  
just the fader (front/back).  
When you have finished making your  
changes,  
press the AUDIO button =.  
press the AUDIO button =.  
19  
X-BASS  
X-BASS  
SPECTROMETER  
Setting the spectrometer  
The X-BASS feature can be used to  
boost the bass at low volume levels.  
The spectrometer (level display) briefly  
provides a symbolic display of the vol-  
ume and the audio control settings  
whilst you are adjusting them.  
Adjusting the X-BASS boost  
settings  
The X-BASS boost can be set in steps  
from “X-BASS LOW” to “X-BASS MID”  
to “X-BASS HIGH”.  
When you are not changing any set-  
tings, the spectrometer displays the car  
radio’s output level.  
You can set the type of spectrometer in  
the menu.  
Press the X-BASS button <.  
There are two types available.  
Keep pressing the or button  
: until the required setting ap-  
pears in the display.  
Setting the spectrometer type  
Press the MENU button 8.  
“MENU” appears in the display.  
When you have finished making your  
changes,  
press the X-BASS button <.  
Keep pressing the or button  
: until “EQ DISPLAY” appears in  
the display.  
Press the or button : to  
select “SPECTRUM 1”,  
“SPECTRUM 2” or “EQ DISP OFF.”  
When you have finished making your  
changes,  
press the MENU button 8 or OK  
; twice.  
20  
EXTERNAL AUDIO SOURCES  
External audio sources  
SPECIFICATIONS  
Specifications  
Instead of connecting a CD changer,  
you can connect another audio source  
equipped with a line output. The audio  
source, for example, can be a portable  
CD player, MiniDisc player or MP3 play-  
er.  
Amplifier  
Output power:  
4 x 25 watts sine in  
accordance with  
DIN 45 324 at  
14.4 V  
4 x 50 watts max.  
power  
TheAUX input must be activated in the  
menu.  
If you want to connect an external au-  
dio source, you will need an adapter  
cable. You can obtain this adapter ca-  
ble (BP no.: 7 607 897 093) from your  
authorised Blaupunkt dealer.  
Tuner  
Frequency ranges US:  
FM:  
AM:  
87.5 – 107.9 MHz  
530 – 1710 kHz  
Frequency ranges Asia and Europe:  
Switching the AUX input on/off  
FM:  
AM:  
87.5 – 108 MHz  
531 – 1602 kHz  
Press the MENU button 8.  
“MENU” appears in the display.  
Frequency ranges Thailand:  
Keep pressing the or button  
: until “AUX-IN-1 OFF” or “AUX-  
IN-1 ON” appears in the display.  
FM:  
AM:  
87.5 – 108 MHz  
531 – 1629 kHz  
Press the or button : to  
FM mono sensitivity:  
17 dbf  
switch AUX on/off.  
When you have finished making your  
changes,  
FM frequency response:  
35 - 16,000 Hz  
press the MENU button 8 or OK  
CD  
;.  
Frequency response:  
Note:  
20 - 20,000 Hz  
If the AUX input is switched on it  
can be selected by pressing the  
CD•C button @.  
Pre-amp out  
4 channels:  
3 V  
Input sensitivity  
AUX input:  
2 V / 6 k  
Tel./Navi input:  
10 V/ 1 kΩ  
Subject to changes!  
21  
GUARANTEE  
Guarantee  
The scope of the guarantee is orientat-  
ed around the regulations in force with-  
in the country in which the unit was pur-  
chased.  
If your unit develops a fault, please con-  
tact your dealer and present the pur-  
chase receipt.  
If the statutory guarantee period in your  
country is less than 12 months, Blau-  
punkt will grant a 12-month manufac-  
turer’s guarantee. This guarantee does  
not cover damage due to wear, incor-  
rect usage or commercial use.  
If you wish to enforce a claim under the  
manufacturer’s guarantee that is provid-  
ed by Blaupunkt, please send the faulty  
unit together with the purchase receipt  
to the Blaupunkt customer service cen-  
tre in your country. You can find out  
which address is closest to you by con-  
tacting the telephone hotline listed on  
the back page of this booklet. Blaupunkt  
retains the right to rectify defects or sup-  
ply a replacement.  
22  

Agilent Technologies 8590 User Manual
Alpine CDA 7944R User Manual
Audiovox VBT100 User Manual
Black Decker BLP6600M User Manual
Blaupunkt FRANKFURT RCM 82 User Manual
Crown Boiler 24 11 User Manual
Dual SXSERIES SX692 User Manual
HP (Hewlett Packard) Hewlett Packard Car Video System S2231 User Manual
JBL GTO1002D User Manual
Jensen Phase Linear US268 User Manual