Blaupunkt Car Stereo System MP27 User Manual

Radio CD MP3 WMA  
Brighton MP27  
Ravenna MP27  
Rimini MP27  
7 647 773 310  
7 647 793 310  
7 647 783 310  
7 647 683 310  
San Diego MP27  
Bedienungsanleitung  
Operating instructions  
Mode d’emploi  
Istruzioni d’uso  
Gebruiksaanwijzing  
Bruksanvisning  
Instrucciones de manejo  
Instruções de serviço  
Betjeningsvejledning  
Instrukcja obsługi  
Návod k obsluze  
Návod na obsluhu  
Controls  
; AUDIO button  
1
button  
Sets bass, treble, balance and fader.  
Selects an equalizer presetting.  
Switching X-BASS on/off and adjust-  
ing it.  
to remove the control panel (release  
panel)  
2 Button to switch the device on/off and  
operate the volume mute feature.  
< Keys 1 - 5  
3 Volume control  
4 CD tray  
= TRAF button  
Short press: Switches traffic informa-  
tion standby on/off.  
Long press: Switches convenient RDS  
function on/off.  
5 LCD display  
6 Arrow buttons  
7
button  
> SRC/ button  
to eject the CD from the device.  
Short press: Switching sources be-  
tween CD/MP3, CD changer (if con-  
nected) and AUX.  
8 ESC button  
Confirm menu item and return to the  
display of the MENU or AUDIO main  
level.  
Long press: Briefly displaying time.  
? BND/TS button  
9 DIS button  
Short press: Selects the FM memory  
banks and the MW and LW wavebands.  
Long press: Starts the Travelstore  
function.  
Short press: Briefly displays alternative  
display contents (e.g. time).  
Long press: Changes display contents.  
: MENU button (OK)  
Short press: Calls up the menu for  
settings.  
Confirming the menu selection (OK).  
Long press: Starts the Scan function.  
30  
Contents  
About these instructions .................. 32 MP3/WMA mode ............................. 46  
Preparing an MP3/WMA CD............. 46  
Switching to MP3 mode .................. 47  
Configuring the display ................... 47  
Selecting a directory ...................... 48  
Selecting Tracks/Files..................... 48  
Fast search ................................... 48  
Random track play (MIX)................. 48  
Scanning tracks (SCAN).................. 48  
Repeating individual tracks or  
For your safety ................................ 33  
Scope of delivery............................. 34  
Detachable control panel ................. 34  
Switching on/off.............................. 35  
Adjusting the volume ....................... 36  
Radio mode ..................................... 38  
Adjusting the tuner......................... 38  
Switching to radio mode ................. 38  
Convenient RDS functions............... 38  
Selecting the waveband/  
whole directories (REPEAT)............. 49  
Interrupting playback (PAUSE)......... 49  
CD-changer mode ............................ 50  
Switching to CD-changer mode........ 50  
Selecting CDs................................ 50  
Selecting tracks............................. 50  
Fast searching (audible).................. 50  
Configuring the display ................... 50  
Repeating individual tracks or  
whole CDs (REPEAT) ...................... 50  
Random track play (MIX)................. 51  
Scanning all tracks on all CDs (SCAN) .. 51  
Interrupting playback (PAUSE)......... 51  
memory bank................................ 39  
Tuning into a station ....................... 39  
Setting the sensitivity of station  
seek tuning ................................... 39  
Storing stations ............................. 40  
Storing stations automatically  
(Travelstore) ................................. 40  
Listening to stored stations ............. 40  
Scanning receivable stations (SCAN) .. 40  
Setting the scanning time................ 40  
Programme type (PTY) .................. 41  
Optimising radio reception.............. 42  
CLOCK time..................................... 52  
Traffic information........................... 42  
Sound ............................................. 53  
Adjusting the bass ......................... 53  
Adjusting the treble........................ 53  
Setting the left/right volume  
distribution (balance)..................... 53  
Adjusting the front/rear volume  
distribution (fader) ........................ 53  
Equalizer presettings (Presets) ........ 54  
X-BASS ........................................... 54  
External audio sources..................... 55  
Specifications ................................. 55  
CD mode ......................................... 43  
Switching to CD mode .................... 43  
Selecting tracks............................. 44  
Fast track selection ........................ 44  
Fast searching (audible).................. 44  
Random track play (MIX)................. 44  
Scanning tracks (SCAN).................. 44  
Repeating tracks (REPEAT) ............. 44  
Interrupting playback (PAUSE)......... 45  
Configuring the display .................. 45  
Displaying CD text.......................... 45  
Traffic announcements in CD mode .. 45  
Ejecting a CD................................. 45  
31  
About these instructions  
Use as directed  
About these instructions  
This device is intended for installation and  
operation in a vehicle with 12 V vehicle sys-  
tem voltage and must be installed in a DIN  
slot. Observe the 'performance limits in the  
technical data. Repairs and installation, if  
necessary, should be performed by a spe-  
cialist.  
These instructions contain important infor-  
mation to easily and safely install and oper-  
ate the device.  
Read these instructions carefully and  
completely before using the device.  
Keep the instructions at a location so  
that they are always accessible to all  
users.  
Declaration of conformity  
Always pass on the device to third par-  
ties together with these instructions.  
The Blaupunkt GmbH declares that this  
car sound system complies with the basic  
requirements and the other relevant regula-  
tions of the directive 1999/5/EG.  
In addition, observe the instructions of the  
devices used in conjunction with this de-  
vice.  
Service  
Symbols used  
These instructions employ the following  
symbols:  
In some countries, Blaupunkt offers a repair  
and pickup service.  
information whether this service is avail-  
able in your country.  
If you want to use this service, you may re-  
quest a pickup service for your device using  
the Internet.  
CAUTION!  
Warns about laser beam  
CAUTION!  
Warns about damaging the CD  
drive  
Warranty  
We provide  
a
manufacturer's warranty  
The CE mark confirms the compli-  
ance with EU directives.  
for products bought within the European  
Union. For devices purchased outside the  
European Union, the warranty terms issued  
by our respective responsible domestic  
agency are valid.  
u
Identifies a sequencing step  
Identifies a listing  
The warranty terms can be called up under  
from:  
Blaupunkt GmbH  
Hotline  
Robert-Bosch-Str. 200  
D-31139 Hildesheim  
32  
For your safety  
After operation  
For your safety  
The device is worthless to a thief with-  
out the control panel. Always remove  
the control panel whenever you leave  
the vehicle.  
The device was manufactured according to  
the state of the art and established safety  
guidelines. Even so, dangers may occur if  
you do not observe the safety notes in these  
instructions:  
Transport the control panel so that it is  
protected against impacts and the con-  
tacts cannot become dirty.  
If you are installing device  
yourself  
You may only install the device yourself if  
you are experienced in installing car sound  
systems and are very familiar with the elec-  
trical system of the vehicle. For this pur-  
pose, observe the installation instructions  
at the end of these instructions.  
Cleaning notes  
Solvents, cleaning and scouring agents as  
well as dashboard spray and plastics care  
product may contain ingredients that will  
damage the surface of the device.  
Use only a dry or slightly moistened  
cloth for cleaning the device.  
If necessary, clean the contacts of the  
control panel regularly using a soft  
cloth moistened with cleaning alcohol.  
Observe the following!  
Danger!  
The device contains a Class 1 laser  
that can cause injuries to your eyes.  
Disposal of old unit  
(EU countries only)  
Do not open the device and do not perform  
any modifications.  
Do not dispose of your old device in  
the household trash!  
In operation  
Use the return and collection sys-  
tems available to dispose of the old device.  
Operate the device only if traffic situa-  
tion permits it! Stop at a suitable loca-  
tion to perform more extensive opera-  
tions.  
Remove or attach the control panel only  
while the vehicle is standing an.  
Always listen at a moderate volume  
so that you can hear acoustic warning  
signals (e.g. police sirens) and protect  
your hearing.Do not increase the vol-  
ume when selecting a different audio  
source or while the CD changer chang-  
es the CD. The device is briefly muted.  
33  
Scope of delivery  
Detachable control panel  
Scope of delivery  
Detachable control panel  
The scope of delivery includes:  
Theft protection  
1
1
2
1
Car sound system  
Support frame  
The device is equipped with a detachable  
control panel (flip-release panel) as a way  
of protecting your equipment against theft.  
The device is worthless to a thief without  
this control panel.  
Disassembly bar  
Operating instructions  
Protect your device against theft by taking  
the control panel with you whenever you  
leave your vehicle. Do not leave the control  
panel inside your vehicle - not even in a hid-  
ing place.  
Optional equipment  
(not part of the scope of delivery)  
Use only accessories approved by  
Blaupunkt.  
The control panel has been designed to be  
easy to use.  
Remote control  
Notes:  
The steering wheel and/or handheld re-  
mote control allows you to access the most  
important functions of your car sound sys-  
tem safely and conveniently.  
• Never drop the control panel.  
• Never expose the control panel to di-  
rect sunlight or other heat sources.  
You cannot switch the device on/off using  
the remote control.  
• Avoid direct skin contact with the  
control panel’s electrical contacts. If  
necessary, please clean the contacts  
with a lint-free cloth moistened with  
cleaning alcohol.  
You can find out from your Blaupunkt dealer  
which remote controls can be used with  
your car sound system.  
Detaching the control panel  
Amplifiers  
You can use all Blaupunkt and Velocity am-  
plifiers.  
1
CD changers  
You can connect the following Blaupunkt  
CD changers:  
CDC A 03, CDC A 08 and IDC A 09.  
u
Press the button 1.  
The locking mechanism of the control panel  
is unlocked.  
u
Pull the control panel straight out of the  
device and to the left.  
34  
Detachable control panel  
Switching on/off  
The device switches off.  
Switching on/off  
All the current settings are saved.  
There are various ways of switching the de-  
vice on/off:  
Any CD already inserted in the device re-  
mains there.  
Switching on/off using the vehicle  
ignition  
Attaching the control panel  
The device will switch on/off simultaneous-  
ly with the ignition if the device is correctly  
connected to the vehicle’s ignition and you  
did not switch the device off by pressing  
button 2.  
u
Push the control panel into the guides  
of the device from the left to the right.  
u
Carefully push on the left side of the  
control panel until it clicks into place.  
Switching on/off using button 2  
u
To switch on the device, press button  
2.  
u
To switch off the device, press and  
hold down button 2 for longer than  
two seconds.  
Note:  
The device switches off.  
When attaching the control panel, make  
sure you do not push on the display.  
Note:  
If the device was still switched on when you  
detached the control panel, it will automati-  
cally switch on with the last setting activat-  
ed (radio, CD, CD changer or AUX) when  
the panel is replaced.  
To protect the vehicle battery, the de-  
vice will switch off automatically after  
one hour if the ignition is off.  
Switching on with CD draw-in  
If the device is switched off and no CD is in  
the drive,  
u
gently insert the CD with its printed  
side uppermost into the drive 4 until  
you feel some resistance.  
The drive draws in the CD automatically.  
You must not hinder or assist the drive as it  
draws in the CD.  
The device switches on and CD playback  
starts.  
35  
Switching on/off  
Note:  
Adjusting the volume  
Adjusting the volume  
If the vehicle ignition was switched  
You can adjust the volume in increments  
from 0 (off) to 66 (maximum).  
off prior to inserting the CD, you must  
switch in on first with the button 2 to  
start the playback.  
To increase the volume,  
u
press the + button 3.  
To decrease the volume,  
press the – button 3.  
Switching the device on/off using the  
detachable control panel  
u
u
Detach the control panel.  
The device switches off.  
Attach the control panel again.  
Setting the power-on volume  
u
Note:  
The device switches on. The last setting  
(radio, CD, CD changer or AUX) is reacti-  
vated.  
The device features a time-out function  
(time window).  
For example, if you press the MENU  
button : and select a menu item,  
the device switches back after ap-  
prox. 8 seconds after the last button  
activation. The settings performed are  
saved.  
You can set the power-on volume.  
u
u
Press the MENU button :.  
Press the or button 6 repeat-  
edly until "ON VOLUME" appears on the  
display.  
u
Adjust the power-on volume using the  
buttons 6.  
To help you adjust the setting more easily,  
the device will increase or decrease the vol-  
ume as you make your changes.  
If you enable "LAST VOL", the volume which  
was set the last time you switched off the  
device is re-enabled.  
36  
Adjusting the volume  
Note:  
Switching the confirmation beep  
on/off  
The system will output a confirmation beep  
for some functions if you keep a button  
pressed down for longer than two seconds,  
for instance, when assigning a radio station  
to a station preset button. You can switch  
the beep on or off.  
To protect your hearing, the power-on  
volume is limited to the value "38". If  
the volume before switching off was  
higher and the "LAST VOL" setting was  
selected, the device switches on again  
with the value "38".  
When you have finished making your chang-  
es,  
u
u
Press the MENU button :.  
u
press the MENU button : twice.  
Press the or button 6repeatedly  
until "BEEP ON" or "BEEP OFF" appears  
on the display.  
Quickly reducing the volume  
(Mute)  
You can quickly reduce the volume to a pre-  
set level (Mute).  
u
Switch the beep on or off using the  
buttons 6.  
When you have finished making your chang-  
es,  
u
Briefly press the button 2.  
"MUTE" appears on the display.  
u
press the MENU button :.  
Cancelling mute  
To return to your previously set volume  
level,  
Muting during telephone mode  
If your device is connected to a cell phone,  
the car sound system is muted when  
you "pick up" the phone. For this purpose,  
the cell phone must be connected to the  
device as described in the installation  
instructions.  
u
briefly press the button 2 again.  
Adjusting the mute level  
You can adjust the mute level.  
The display shows "PHONE".  
u
u
Press the MENU button :.  
Press the or button 6 repeat-  
edly until "MUTE LVL" appears on the  
display.  
u
Adjust the mute level using the  
buttons 6.  
When you have finished making your  
changes,  
u
press the MENU button : twice.  
37  
Radio mode  
Convenient RDS functions  
Radio mode  
This device is equipped with an RDS radio  
receiver (Radio Data System). Many of the  
receivable FM stations broadcast a signal  
that not only carries the programme but  
also additional information such as the sta-  
tion name and programme type (PTY).  
Adjusting the tuner  
To ensure proper functioning of the tuner,  
the device must be set for the region in  
which it is being operated. You can select  
among Europe (EUROPE), America (USA),  
South America (S-AMERICA), and Thailand  
(THAI). The tuner is factory-set to the re-  
gion in which it was sold. If you experience  
problems with your radio reception, please  
check this setting.  
The station name appears on the display as  
soon as the tuner receives it.  
The convenient RDS functions AF  
(Alternative Frequency) and REGIONAL ex-  
tend your radio’s range of functions.  
The radio functions described in these op-  
erating instructions refer to the tuner set-  
ting EUROPE.  
AF: If the RDS function is activated, the  
radio automatically tunes into the best  
receivable frequency for the station  
that is currently set.  
u
Switch off the device by pressing but-  
ton 2.  
REGIONAL: At certain times, some ra-  
dio stations divide their programme  
into regional programmes providing  
different content. You can use the REG  
function to prevent the car radio from  
switching to alternative frequencies  
that are transmitting different pro-  
gramme content.  
u
Hold the buttons 1 and 5 <pressed at  
the same time and switch on the device  
again with the button 2.  
"TUNER" is displayed.  
u
Select your tuner region with the or  
button 6.  
To save the setting,  
Note:  
u
switch the device off and on again or  
wait approx. 8 seconds. The radio  
starts playing with the last setting se-  
lected (radio, CD, CD changer or AUX).  
REGIONAL must be activated/deacti-  
vated separately in the menu.  
Switching the RDS function on/off  
If you want to use the RDS functions (AF  
and REGIONAL),  
Switching to radio mode  
If you are in CD, CD changer or AUX mode,  
u
press and hold down the TRAF = but-  
ton for longer than two seconds.  
u
or  
press the BND/TS ? button  
The RDS function is active if the RDS sym-  
bol appears on the display.  
u
press the SRC/ button > repeated-  
ly until the memory bank, e.g. "FM1",  
appears on the display.  
A border appears around the radio symbol.  
38  
Radio mode  
Switching REGIONAL on/off  
Tuning into stations manually  
u
u
Press the MENU button :.  
You can also tune into stations manually.  
Press the or button 6 repeated-  
ly until "REG" appears on the display.  
"OFF" or "ON" is displayed alongside  
"REG".  
Note:  
You can only tune into stations manu-  
ally if the RDS function is deactivated.  
u
Press the or button 6.  
To switch REGIONAL on/off,  
Browsing through broadcasting  
networks (FM only)  
If radio stations provide several pro-  
grammes, you have the option of browsing  
through these so-called "broadcasting net-  
works".  
u
u
press the or button 6.  
Press the MENU button :.  
Selecting the waveband/memory  
bank  
This device can receive programmes broad-  
cast over the FM frequency range as well as  
the MW and LW (AM) wavebands. There are  
three memory banks available for the FM  
waveband (FM1, FM2 and FMT) and one  
for each of the MW and LW wavebands.  
Five stations can be stored in each memory  
bank.  
Note:  
The RDS function must be activated be-  
fore you can use this feature.  
u
Press the or button 6 to switch  
to the next station on the broadcasting  
network.  
Note:  
To switch between the FM memory banks  
(FM1, FM2 and FMT) and the MW and LW  
wavebands,  
When using this feature, you will only  
be able to switch to stations that you  
have received once before already. To  
receive the stations, use the Scan or  
Travelstore function.  
u
briefly press the BND/TS ? button.  
Tuning into a station  
There are various ways of tuning into a sta-  
tion.  
Setting the sensitivity of station  
seek tuning  
You can choose whether the radio should  
only tune into stations providing good re-  
ception or whether it can also tune into  
those with a weak reception.  
Automatic station seek tuning  
u
Press the or button 6.  
The radio tunes into the next receivable sta-  
tion.  
u
u
Press the MENU button :.  
Press the or button 6repeatedly  
until "SENS" and the currently set value  
appears on the display.  
39  
Radio mode  
"SENS HI6" means that the tuner is set to The storing procedure begins. "FM TSTORE"  
the highest sensitivity setting. "SENS LO1" appears on the display. After the process  
means it is set to the lowest sensitivity set- has completed, the radio will play the sta-  
ting.  
Set the desired sensitivity level using  
the buttons 6.  
tion that is stored in memory location 1 of  
the FMT memory bank.  
u
Listening to stored stations  
When you have finished making your chang-  
es,  
u
Select the memory bank or waveband.  
u
Press the station button 1 - 5 < of the  
desired station.  
u
press the MENU button :.  
Note:  
You can set different sensitivity levels  
for FM and MW or LW (AM).  
Scanning receivable stations  
(SCAN)  
You can use the scan function to play all the  
receivable stations briefly. You can set the  
scanning time from 5 to 30 seconds in the  
menu (in increments of 5 seconds).  
Storing stations  
Storing stations manually  
u
Select the desired memory bank (FM1,  
FM2, FMT) or one of the wavebands  
(MW or LW).  
Starting SCAN  
u
Press and hold down the MENU button  
: for longer than two seconds.  
u
u
Tune into the desired station.  
Press and hold down one of the station  
buttons 1 - 5 < for longer than two  
seconds to assign the station to that  
button.  
Scanning begins. "SCAN" appears briefly  
on the display followed by a flashing display  
of the current station name or frequency.  
Cancelling SCAN and continuing  
listening to a station  
Storing stations automatically  
(Travelstore)  
u
Press the MENU button :.  
You can automatically store the five sta-  
tions offering the strongest reception in the  
region (FM only). The stations are stored in  
the FMT memory bank.  
Scanning stops and the radio continues  
playing the station that it tuned into last.  
Setting the scanning time  
Note:  
u
Press the MENU button :.  
Any stations that were previously  
stored in this memory bank are deleted  
in the process.  
u
Press the or button 6 repeat-  
edly until "SCAN TIME" appears on the  
display.  
u
Press and hold down the BND/TS ?  
for longer than two seconds.  
u
Set the desired scanning time using the  
buttons 6.  
40  
Radio mode  
When you have finished making your chang-  
es,  
the radio will automatically switch  
from the currently tuned station or  
from CD mode or CD-changer mode  
to the station whose programme  
type matches the one you selected.  
u
press the MENU button : twice.  
Note:  
The defined scanning time is also ap-  
plied by the system to scanning carried  
out in CD and CD changer mode.  
• If you do not want this PTY EON  
switching, disable it in the menu  
with "PTY off". First, press one of the  
SRC/ > or BND/TS ? buttons.  
Programme type (PTY)  
Switching PTY on/off  
Besides transmitting the station name,  
some FM stations also provide informa-  
tion on the type of programme that they are  
broadcasting. Your car radio can receive  
and display this information.  
u
u
Press the MENU button :.  
Press the or button 6repeatedly  
until "PTY ON" or "PTY OFF" appears on  
the display.  
For example, the programme types can be:  
u
u
Press the or button 6 to switch  
PTY ON or OFF.  
CULTURE  
SPORT  
ROCK  
TRAVEL  
NEWS  
MUSIC  
JAZZ  
POP  
Press the MENU button :.  
You can use the PTY function to select sta- Selecting the PTY language  
tions of a particular programme type.  
You can select the language for the display  
of the programme types. Options include  
"DEUTSCH", "ENGLISH" and "FRANÇAIS".  
PTY-EON  
If you specify the programme type and start  
seek tuning, the radio will switch from the  
current station to a station of the selected  
programme type.  
u
u
Press the MENU button :.  
Press the or button 6 repeat-  
edly until "PTY LANG" appears on the  
display.  
Notes:  
u
Set the desired language using the  
buttons 6.  
• If the tuner does not find a station  
that corresponds to the selected pro-  
gramme type, you will hear a beep  
and "NO PTY" appears briefly on the  
display. The radio will then retune to  
the station that it received last.  
When you have finished making your chang-  
es,  
u
press the MENU button : twice.  
• If the tuned radio station or another  
station on the broadcasting net-  
work broadcasts your selected pro-  
gramme type at a later point in time,  
41  
Radio mode  
Traffic information  
Selecting a programme type and  
starting seek tuning  
Traffic information  
Your device is equipped with an RDS-EON  
receiver. EON stands for Enhanced Other  
Network.  
u
Press the or button 6.  
The current programme type appears on  
the display.  
Whenever a traffic announcement (TA) is  
broadcast, the system switches automati-  
cally from a station that does not provide  
traffic reports to the appropriate traffic in-  
formation station within the broadcasting  
network that does.  
u
If you want to select another pro-  
gramme type, you can do so by press-  
ing the or button 6 whilst this  
display is visible.  
The selected programme type appears  
briefly on the display.  
Once the traffic report has been played, the  
system will switch back to the programme  
that you were listening to before.  
u
Press the or button 6 to start  
seek tuning.  
The radio will then tune into the next station  
that it finds that corresponds to your select-  
ed programme type.  
Switching traffic information  
priority on/off  
u
Briefly press the TRAF button =.  
Optimising radio reception  
The priority for traffic announcements is ac-  
tivated if the display shows the traffic jam  
symbol.  
HICUT  
The HICUT function improves reception  
during poor radio reception (only FM). If  
reception interferences are present, the in-  
terference level is automatically reduced.  
Notes:  
You will hear a warning beep:  
• If you leave the reception area of a  
traffic information station that you  
are currently listening to.  
Switching HICUT on/off  
• If you are receiving a traffic informa-  
tion station and the volume is set  
to minimum (0) or if you leave the  
broadcast area of the set traffic in-  
formation station while listening to  
a CD, a CD changer or AUX and the  
subsequent automatic seek tuning  
does not find a new traffic informa-  
tion station.  
u
u
Press the MENU button :.  
Press the or button 6repeatedly  
until "HICUT" appears on the display.  
u
Press the or button 6 to adjust  
the HICUT setting.  
"HICUT 0" means no automatic reduction of  
the interference level, "HICUT 1" means au-  
tomatic reduction of the interference level.  
u
Press the MENU button :.  
• If you retune the radio from a traffic  
information station to a station that  
does not broadcast traffic informa-  
tion.  
42  
Traffic information  
CD mode  
If you hear the warning beep, you can ei-  
ther switch off traffic information priority  
or tune into a station that broadcasts traffic  
information.  
CD mode  
You can use this device to play standard  
audio CDs, CD-Rs and CD-RWs with a dia-  
meter of 12 or 8 cm.  
Setting the volume for traffic  
announcements  
Caution!  
Labelled or shaped CDs can dam-  
age the CD drive.  
u
Press the MENU button :.  
u
Press the or button 6 repeat-  
edly until "TA VOLUME" appears on the  
display.  
Do not insert any shape CDs.  
Do not attach labels to CDs since the la-  
bel may detach during operation.  
u
Adjust the volume using the  
tons 6.  
but-  
When you have finished making your chang-  
es,  
Note:  
Label CDs only by using a marker since  
it does not contain any caustic materi-  
als. Permanent markers can damage  
CDs.  
u
press the MENU button : twice.  
Notes:  
• Using the volume control 3, you  
can also adjust the volume during a  
traffic announcement for the dura-  
tion of that announcement.  
To ensure proper functioning, use only CDs  
with the Compact-Disc logo. Copy-pro-  
tected CDs can cause playback problems.  
Blaupunkt cannot guarantee the proper  
functioning of copy-protected CDs!  
• The volume distribution can be ad-  
justed for traffic announcements.  
For further information, please read  
the "Sound" chapter.  
Besides being able to play audio CDs on this  
device, you can also play CDs containing  
MP3/WMA music files. For further informa-  
tion, please read the chapter entitled "MP3/  
WMA mode".  
Switching to CD mode  
If there is no CD inserted in the drive,  
u
gently insert the CD with its printed  
side up into the CD tray 4 until you  
feel some resistance.  
The drive draws in the CD automatically.  
You must not assist or hinder the drive as it  
draws in the CD.  
43  
CD mode  
The CD starts playing.  
Random track play (MIX)  
The display shows the CD symbol.  
u
Press the 5 MIX button <.  
Notes:  
"MIX CD" appears briefly on the display  
and the MIX symbol lights up. The next ran-  
domly selected track will then be played.  
• The CD symbol indicates that a CD is  
located in the drive.  
A border surrounding the CD symbol  
indicates that CD is selected as au-  
dio source.  
Cancelling MIX  
u
Press the 5 MIX button < again.  
• If the vehicle ignition was switched  
off prior to inserting the CD, you  
must switch in on first with the but-  
ton 2 to start the playback.  
"MIX OFF" appears briefly on the display  
and the MIX symbol disappears.  
Scanning tracks (SCAN)  
You can scan (briefly play) all the tracks on  
the CD.  
If a CD is already inserted in the drive,  
u
press the SRC/ button > repeated-  
ly until "CD" appears on the display.  
u
Press and hold down the MENU button  
: for longer than two seconds.  
Playback begins from the point at which it  
was last interrupted.  
The next track will then be scanned.  
Note:  
Selecting tracks  
You can set the scanning time. For  
further information, please read the  
section entitled "Setting the scanning  
time" in the "Radio mode" chapter.  
u
Press one of the arrow buttons 6 to  
select the next or previous track.  
If you press the or button 6 once, the  
player will play the current track again from  
the beginning.  
Cancelling SCAN and continuing  
listening to a track  
Fast track selection  
To quickly select tracks backwards or for-  
wards,  
u
To stop scanning, press the MENU but-  
ton :.  
The currently scanned track will then con-  
tinue to be played normally.  
u
press and hold down one of the  
buttons 6 until fast-reverse / fast-for-  
ward track selection begins.  
Repeating tracks (REPEAT)  
If you want to repeat a track,  
Fast searching (audible)  
To fast search backwards or forwards,  
u
press the 4 RPT button <.  
"RPT TRCK" appears briefly on the display  
and the RPT symbol is displayed. The track  
is repeated continuously until you deacti-  
vate RPT.  
u
press and hold down one of the  
buttons 6 until fast searching back-  
wards / forwards begins.  
44  
CD mode  
Cancelling REPEAT  
Switching CD text on/off  
If you want to cancel the repeat function,  
u
u
Press the MENU button :.  
Press the or button 6repeatedly  
until "CD TEXT" appears on the display.  
u
press the 4 RPT button : again.  
"RPT OFF" appears briefly on the display  
and the RPT symbol disappears. Normal  
playback is then resumed.  
u
Switch the CD text function on ("TEXT  
ON") or off ("TEXT OFF") using the or  
button 6.  
Interrupting playback (PAUSE)  
When you have finished making your chang-  
es,  
u
Press the button 3 <.  
u
press the MENU button : twice.  
"PAUSE" appears on the display.  
Cancelling pause  
Traffic announcements in CD  
mode  
If you wish to receive traffic announcements  
in CD mode,  
u
During the pause, press the button 3  
<.  
Playback is continued.  
u
press the TRAF button =.  
Configuring the display  
You can select from two display types for  
CD mode:  
The priority for traffic announcements is  
activated if the display shows the traffic  
jam symbol. For further information, please  
read the chapter "Traffic information recep-  
tion".  
Track number and time  
Track number and playing time  
To change the display,  
Ejecting a CD  
u
Press and hold down the DIS button  
9 for longer than 2 seconds.  
u
Press the  
CD compartment.  
The CD is ejected.  
button 7 next to the  
Displaying CD text  
Some CDs include CD text. The CD text  
might contain the names of the artist, al-  
bum and tracks.  
u
Remove the CD.  
Notes:  
• If a CD is ejected, the drive will auto-  
matically draw it back in again after  
approx. 10 seconds.  
You can allow the CD text to be displayed  
as scrolling text every time you switch to  
another track. The default display will ap-  
pear again after the whole CD text has been  
shown once. For further information, please  
read the section entitled "Configuring the  
display".  
• You can also eject CDs whilst the  
device is switched off or whilst an-  
other audio source is activated.  
45  
MP3/WMA mode  
MP3/WMA mode  
D01  
You can also use this car sound system to  
play CD-Rs and CD-RWs that contain MP3  
music files. You can also play WMA files.  
The operation for playing MP3 and WMA  
files is identical.  
A
D02  
D03  
D04  
Notes:  
T001  
T001  
• WMA files with Digital Rights  
Management (DRM) from online mu-  
sic shops cannot be played with this  
device.  
T002  
T003  
T004  
T005  
T002  
T003  
T004  
T005  
T006  
T007  
T008  
T009  
T010  
T011  
B
T001  
• WMA files can only be played back  
safely if they were created with  
Windows Media Player version 8.  
T002  
T003  
T004  
T005  
T006  
Preparing an MP3/WMA CD  
The various combinations of CD burners,  
CD burning software and CD blanks may  
lead to problems arising with the device’s  
ability to play certain CDs. If problems oc-  
cur with your own burned CDs, you should  
try another brand of CD blank or choose an-  
other colour of CD blank.  
A Directories  
B
Title · Files  
You can name each directory using a PC.  
The device is capable of displaying the di-  
rectory name. Name the directories and  
tracks/files using your CD burner software.  
The software’s instruction manual will pro-  
vide details on how to do this.  
The format of the CD must be ISO 9660  
Level 1/Level 2 or Joliet. Other formats  
cannot be played reliably.  
Youcancreateamaximumof252directories  
on a CD. You can use this device to access  
all of these directories individually.  
Note:  
When naming directories and tracks/  
files you should avoid using accents  
and special characters.  
Regardless of the number of directories on  
the CD, the device can handle up to 511  
MP3 files on a single CD, with a maximum  
of 255 files in one directory.  
If you like your files to be in the correct or-  
der, you should use burner software that  
places files in alphanumerical order. If your  
software does not provide this feature you  
also have the option of sorting the files  
manually. For this purpose, you must en-  
ter a number in front of each file name, e.g.  
46  
MP3/WMA mode  
"001", "002", etc. The leading zeros must  
also be entered.  
Configuring the display  
The following settings require that an MP3  
CD is in the device.  
MP3 tracks can contain additional infor-  
mation such as the artist, album and track  
names (ID3 tags). This device can display  
ID3 tags (version 1).  
Configuring the default display  
You can display various types of informa-  
tion on the current track:  
When creating (encoding) MP3 files from  
audio files, you should use bit rates up to a  
maximum of 256 Kbit/sec.  
Track number and playing time "TRCK-  
TIME"  
This device can only play MP3 files that  
have the ".MP3" file extension.  
Track number and time "TRCK-CLK"  
Directory number and track number  
"DIR-TRCK"  
Notes:  
To ensure uninterrupted playback,  
Directory number and time "DIR-CLK"  
• do not try changing the file extension  
to ".MP3" of any files other than MP3  
files and then attempt to play them!  
The device will ignore these invalid  
files during playback.  
Directory number and playing time  
"DIR-TIME"  
Note:  
After the MP3 scrolling text was  
scrolled once after a track change, the  
information is permanently shown on  
the display.  
• Do not use "mixed" CDs containing  
both non-MP3 data and MP3 tracks  
(the device only reads MP3 files dur-  
ing MP3 playback).  
To switch between the different display  
options,  
• Do not use mix-mode CDs contain-  
ing both CD-audio tracks and MP3  
tracks. If you try playing a mix-mode  
CD, the device will only play the CD-  
audio tracks.  
u
press and hold down the DIS button  
9 for longer than 2 seconds.  
u
For an additional selection, press and  
hold down the DIS button 9for longer  
than 2 seconds.  
Switching to MP3 mode  
Configuring the MP3 scrolling texts  
MP3 mode is activated in the same way as  
normal CD mode. For further information,  
please read the section entitled "Switching  
to CD mode" in the "CD mode" chapter.  
One of the following scrolling texts is  
shown once on the display with every track  
change. Afterwards, the configured stand-  
ard display is shown.  
The available scrolling texts are:  
Directory name ("DIR NAME")  
Name of the track ("SONG NAME")  
47  
MP3/WMA mode  
Name of the album ("ALBM NAME")  
Fast search  
To fast search backwards or forwards,  
Name of the artist ("ARTIST")  
File name ("FILE NAME")  
u
press and hold down the or button  
6until fast searching backwards / for-  
wards begins.  
Note:  
Artist, track and album name are part  
of the MP3-ID tag of version 1 and can  
only be displayed if they have been  
saved with the MP3 files (for further in-  
formation, please read the instructions  
that came with your PC’s MP3 software  
or burner software).  
Random track play (MIX)  
To play the tracks in the current directory in  
random order,  
u
briefly press the 5 MIX button <.  
"MIX DIR" appears on the display and the  
MIX symbol lights up.  
To switch between the different display op-  
tions,  
To play all the tracks contained on the in-  
serted MP3 CD in random order,  
u
u
press the MENU button :.  
Press the or button 6 repeat-  
edly until "MP3 DISP" appears on the  
display.  
u
press and hold down the 5 MIX button  
< for longer than two seconds.  
"MIX CD" appears on the display and the  
MIX symbol lights up.  
u
Select the desired MP3 scrolling text  
with the or button 6.  
Cancelling MIX  
To cancel MIX,  
When you have finished making your changes,  
press the MENU button : twice.  
u
u
briefly press the 5 MIX button <.  
Selecting a directory  
To move up or down to another directory,  
"MIX OFF" appears on the display and the  
MIX symbol disappears.  
u
press the or button 6 once or  
several times.  
Scanning tracks (SCAN)  
You can scan (briefly play) all the tracks on  
the CD.  
Selecting Tracks/Files  
to move up or down to another track/file  
in the current directory,  
u
Press and hold down the MENU button  
: for longer than two seconds. The  
next track will then be scanned.  
u
press the or button 6 once or  
several times.  
"TRK SCAN" appears on the display next to  
the flashing track numbers. The titles of the  
CD are scanned in ascending order.  
If you press the button 6 once, the cur-  
rent track will be played again from the be-  
ginning.  
48  
MP3/WMA mode  
Note:  
Interrupting playback (PAUSE)  
You can set the scanning time. For fur-  
ther information on setting the scan-  
ning time, please read the section en-  
titled "Setting the scanning time" in the  
"Radio mode" chapter.  
u
Press the button 3 <.  
"PAUSE" appears on the display.  
Cancelling pause  
u
During the pause, press the button  
<.  
Playback is continued.  
3
Cancelling SCAN and continuing  
listening to a track  
u
Briefly press the MENU button :.  
The currently scanned track will then con-  
tinue to be played normally.  
Repeating individual tracks or  
whole directories (REPEAT)  
To play the current track repeatedly,  
u
briefly press the 4 RPT button <.  
"RPT TRCK" appears briefly on the display  
and RPT lights up.  
To repeat the whole directory,  
u
press and hold down the 4 RPT button  
< for longer than two seconds.  
"RPT DIR" appears briefly on the display.  
Cancelling REPEAT  
To stop the current track or current direc-  
tory from being repeated,  
u
briefly press the 4 RPT button <.  
"RPT OFF" appears briefly on the display  
and RPT disappears.  
49  
CD-changer mode  
Configuring the display  
Five options are available for the display in  
CD changer mode:  
CD-changer mode  
Note:  
Information on handling CDs, inserting  
CDs and operating the CD changer can  
be found in the operating instructions  
supplied with your CD changer.  
Track number and playing time ("TRCK-  
TIME")  
Track number and time ("TRCK-CLK")  
CD number and track number ("CD-  
TRCK")  
Switching to CD-changer mode  
u
Press the SRC/ button > repeat-  
edly until "CHANGER" appears on the  
display.  
CD number and time ("CD-CLK")  
CD number and playing time ("CD-  
TIME")  
A border appears around the CD changer  
symbol.  
u
u
Press and hold down the DIS button  
9 for longer than 2 seconds.  
The device starts playing the first CD that  
the CD changer detects.  
For an additional selection, press and  
hold down the DIS button 9for longer  
than 2 seconds.  
Selecting CDs  
To move up or down to another CD,  
Repeating individual tracks or  
whole CDs (REPEAT)  
To repeat the current track,  
u
press the or button 6 once or  
several times.  
u
briefly press the 4 RPT button <.  
Note:  
"RPT TRCK" appears briefly and RPT lights  
up on the display.  
The device will ignore empty CD slots  
in the changer and slots containing  
invalid CDs.  
To repeat the current CD,  
u
press and hold down the 4 RPT button  
Selecting tracks  
To move up or down to another track on  
the current CD,  
< for longer than two seconds.  
"RPT DISC" appears briefly and RPT lights  
up on the display.  
u
press the or button 6 once or  
several times.  
Cancelling REPEAT  
To stop the current track or current CD from  
being repeated,  
Fast searching (audible)  
To fast search backwards or forwards,  
u
briefly press the 4 RPT button <.  
u
press and hold down one of the  
buttons 6 until fast searching back-  
wards / forwards begins.  
"RPT OFF" appears and RPT disappears on  
the display.  
50  
CD-changer mode  
Note:  
Random track play (MIX)  
You can set the scanning time. For  
further information, please read the  
section entitled "Setting the scanning  
time" in the "Radio mode" chapter.  
To play the tracks on the current CD in  
random order,  
u
briefly press the 5 MIX button <.  
"MIX CD" appears briefly and MIX lights up  
on the display.  
Interrupting playback (PAUSE)  
Press the button 3 <.  
"PAUSE" appears on the display.  
To play the tracks on all inserted CDs in  
random order,  
u
u
press and hold down the 5 MIX button  
< for longer than two seconds.  
Cancelling pause  
"MIX ALL" appears briefly and MIX lights up  
on the display.  
u
During the pause, press the button  
<.  
Playback is continued.  
3
Cancelling MIX  
u
Briefly press the 5 MIX button <.  
"MIX OFF" appears and MIX on the display  
disappears.  
Scanning all tracks on all CDs  
(SCAN)  
To scan (briefly play) all the tracks on all the  
inserted CDs in ascending order,  
u
press and hold down the MENU button  
: for longer than two seconds.  
"TRK SCAN" appears on the display and the  
number of the current track flashes.  
Stopping SCAN  
To stop scanning,  
u
briefly press the MENU button :.  
The currently scanned track will then con-  
tinue to be played normally.  
51  
CLOCK time  
When you have finished making your chang-  
es,  
CLOCK time  
u
press the MENU button :.  
Displaying the time  
To briefly display the time,  
Displaying the time continuously  
when the device is off and the  
ignition is on  
u
press and hold the SRC/ button >  
until the time appears on the display.  
To display the time when the device is off  
and the vehicle ignition is on,  
Setting the time  
To set the time,  
u
press the MENU button :.  
u
u
press the MENU button :.  
The display shows "MENU".  
Press the or button 6 repeat-  
edly until "CLOCK SET" appears on the  
display.  
u
u
Press the or button 6repeatedly  
until "CLOCK OFF" or "CLOCK ON" ap-  
pears on the display.  
u
Press the button 6.  
Press the or button 6 to switch  
the display between ON and OFF.  
The time appears on the display. The hours  
flash and can be adjusted.  
When you have finished making your chang-  
es,  
u
Adjust the hours with the  
6.  
buttons  
u
press the MENU button :.  
Once the hours are set,  
press the button 6.  
The minutes flash.  
u
u
Adjusts the minutes with the  
tons 6.  
but-  
u
Press the MENU button : twice.  
Selecting 12/24-hour clock  
mode  
u
Press the MENU button :.  
The display shows "MENU".  
u
u
Press the or button 6 repeated-  
ly until "24 H MODE" or "12 H MODE"  
appears on the display.  
Press the or button 6 to switch  
between the modes.  
52  
Sound  
When you have finished making your chang-  
es,  
Sound  
You can adjust the sound settings (bass  
and treble) separately for each source (ra-  
dio, CD, CD changer or AUX).  
u
press the AUDIO button ;.  
Setting the left/right volume  
distribution (balance)  
To adjust the left/right volume distribution  
(balance),  
The volume distribution settings (balance  
and fader) apply to all the audio sources  
(except for traffic announcements).  
Fader and balance can be adjusted for traf-  
fic announcements (TA) only during a traf-  
fic announcement.  
u
press the AUDIO button ;.  
"BASS" appears on the display.  
u
u
Press the button 6 repeatedly until  
"BAL" appears on the display.  
Note:  
If bass and treble allow only a limited  
adjustment, set the equaliser preset-  
ting to EQ OFF.  
Press the or button 6 to adjust  
the left/right volume distribution.  
For further details, please read the sec-  
tion "Equaliser presets".  
When you have finished making your chang-  
es,  
u
press the AUDIO button ;.  
Adjusting the bass  
u
Press the AUDIO button ;.  
Adjusting the front/rear volume  
distribution (fader)  
To adjust the front/rear volume distribution  
(fader),  
"BASS" appears on the display.  
u
Press the or button 6 to adjust  
the bass.  
When you have finished making your chang-  
es,  
u
press the AUDIO button ;.  
"BASS" appears on the display.  
u
press the AUDIO button ;.  
u
u
Press the button 6 repeatedly until  
"FADER" appears on the display.  
Adjusting the treble  
Press the or button 6 to adjust  
the front/rear volume distribution.  
u
Press the AUDIO button ;.  
"BASS" appears on the display.  
When you have finished making your chang-  
es,  
u
u
Press the button 6 repeatedly until  
"TREBLE" appears on the display.  
u
press the AUDIO button ;.  
Press the or button 6 to adjust  
the treble.  
53  
Sound  
X-Bass  
Equalizer presettings (Presets)  
X-BASS  
This device features an equalizer in which  
the settings for the music genres "ROCK",  
"POP" and "CLASSIC" are already pro-  
grammed.  
X-Bass allows you to increase the bass at  
low volume.  
The selected X-Bass setting is effective for  
all audio sources (radio, CD, CD changer or  
AUX).  
To select an equalizer preset,  
u
Press the AUDIO button ;.  
The X-BASS increase can be set in incre-  
ments of 1 to 3.  
"BASS" appears on the display.  
"XBASS OFF" means that the X-BASS func-  
tion is switched off.  
u
u
Press the button 6 repeatedly until  
"POP", "ROCK", "CLASSIC" or "EQ OFF"  
appears on the display.  
Adjusting the X-BASS boost  
Press the or button 6 to select  
one of the presets or select "EQ OFF"  
to switch off the equalizer.  
u
Press the AUDIO button ;.  
"BASS" appears on the display.  
When you have finished making your chang-  
es,  
u
u
Press the button 6 repeatedly until  
"XBASS" appears on the display with  
the current setting.  
u
press the AUDIO button ;.  
Press the or button 6repeatedly  
until the desired setting appears on the  
display.  
Note:  
By selecting an equaliser preset (POP,  
ROCK, CLASSIC), the adjustment  
range of the sound setting for bass and  
treble is restricted.  
When you have finished making your chang-  
es,  
u
press the AUDIO button ;.  
54  
External audio sources  
Specifications  
External audio sources  
Specifications  
Instead of the CD changer, you can also  
connect another external audio source  
equipped with a line output. Audio sources  
can, for example, be portable CD players,  
MiniDisc players or MP3 players.  
Amplifier  
Output power:  
4 x 18 watt sine ac-  
cording to  
DIN 45 324  
at 14.4 V  
4 x 45 watt max.  
power  
If you want to connect an external audio  
source, you will need an adapter cable.  
You can obtain this cable (Blaupunkt no.:  
7 607 897 093) from your authorised  
Blaupunkt dealer.  
Tuner  
Wavebands in Europe:  
FM  
MW  
LW  
Note:  
If no CD changer is connected, the  
AUX input must be switched on in the  
menu.  
:
:
:
87.5 - 108 MHz  
531 - 1 602 kHz  
153 - 279 kHz  
Switching the AUX input on/off  
FM frequency response:  
35 - 16,000 Hz  
u
Press the MENU button :.  
The display shows "MENU".  
u
u
Press the or button 6 repeated-  
ly until "AUX OFF" or "AUX ON" appears  
on the display.  
CD  
Frequency range:  
20 - 20,000 Hz  
2 V  
Press the or button 6 to switch  
AUX on or off.  
Pre-amp out  
4 channels:  
When you have finished making your chang-  
es,  
u
press the MENU button :.  
Input sensitivity  
AUX input:  
Note:  
2 V / 6 kΩ  
If the AUX input is switched on, you can  
select it by pressing the SRC/ button  
>. The display shows "AUX INPUT"  
and a border appears around the AUX  
symbol.  
Weight  
approx. 1.3 kg  
Subject to changes!  
55  
Bitte den ausgefüllten Gerätepass sicher aufbewahren!  
Please keep the filled-in radio pass in a safe place!  
Prière de conserver soigneusement la carte d’autoradio remplie !  
Tenete per favore il libretto di apparecchio, debitamente riempito, in un  
posto sicuro!  
Bewaar de ingevulde apparaatpas op een veilige plaats!  
Vänligen förvara ifyllt apparatpass på säker plats!  
¡Favor guardar el documento del aparato debidamente llenado en un lugar  
seguro!  
Por favor, guardar o cartão preenchido do aparelho num lugar seguro!  
Det udfyldte apparatpas opbevares et sikkert sted!  
Prosimy przechowywać metrykę radia w bezpiecznym miejscu!  
Vyplněný dokument o přístroji prosím bezpečně uschovejte!  
Vyplnený dokument o prístroji prosím bezpečne uschovajte!  
339  
Country:  
Phone:  
Fax:  
WWW:  
Germany  
Austria  
(D)  
(A)  
(B)  
0180-5000225  
01-610 39 0  
05121-49 4002  
01-610 39 391  
02-525 5263  
44-898 644  
09-435 99236  
01-4010 7320  
01-89583 8394  
210 94 12 711  
01-46 66 706  
02-369 62464  
40 2085  
Belgium  
Denmark  
Finland  
02-525 5444  
(DK) 44 898 360  
(FIN) 09-435 991  
France  
(F)  
01-4010 7007  
Great Britain  
Greece  
(GB) 01-89583 8880  
(GR) 210 94 27 337  
(IRL) 01-46 66 700  
Ireland  
Italy  
(I)  
(L)  
02-369 62331  
40 4078  
Luxembourg  
Netherlands  
Norway  
Portugal  
Spain  
(NL) 00 31 24 35 91 338 00 31 24 35 91 336  
(N)  
(P)  
(E)  
(S)  
+47 64 87 89 60  
2185 00144  
902 52 77 70  
08-7501850  
+47 64 87 89 02  
2185 00165  
91 410 4078  
08-7501810  
01-8471650  
02-6130 0514  
76 511 809  
022-8771260  
0212-346 00 40  
708-6817188  
Sweden  
Switzerland  
Czech. Rep.  
Hungary  
Poland  
(CH) 01-8471644  
(CZ) 02-6130 0446  
(H)  
(PL)  
(TR)  
76 511 803  
0800-118922  
0212-335 06 71  
Turkey  
USA  
(USA) 800-950-2528  
Brasil  
(Mercosur)  
Malaysia  
(BR) 0800 7045446  
+55-19 3745 2773  
+604-6413 640  
(Asia Pacific) (MAL) +604-6382 474  
Gerätepass  
Name:  
Typ:  
.....................................................................  
7 647  
....................................................................  
Serien-Nr:  
BP ................................................................  
Blaupunkt GmbH, Robert-Bosch-Straße 200, D-31139 Hildesheim  

Canon UC X 15 Hi User Manual
Casio FX 820MS User Manual
Cuisinart BFM 1000 User Manual
Fender 2912(C) User Manual
Hanns G Car Video System HZ201 User Manual
Harbor Freight Tools 65730 User Manual
Hobie 30113 User Manual
Hobie 38584001 User Manual
JVC ENGLISHCCK KD DV6107 User Manual
JVC GR DVM70 User Manual