Blaupunkt ATLANTA RCM 169 User Manual

Radio / Cassette

Atlanta RCM 169

Operating instructions

Contents

Quick Reference........................... 53 First-time installation................... 67 Scanning stored stations with

Preset Scan .......................................... 73

Activating the Install menu ................... 67

Closing the Install menu ....................... 67

Setting the clock ................................... 67

Entering your Owner Identification ....... 67

Reset to default settings ....................... 68

Switching the ignition connection on/off.. 68

Switching the internal output stage

on/off ..................................................... 68

Connecting external equipment ........... 68

Closing the INSTALL menu .................. 68

RC 08 remote control unit ........... 62

Scanning stations with Radio Scan ...... 74

Changing the scan time (Scan) ............ 74

Selecting the seek tuning sensitivity .... 74

Switching from stereo to mono (FM) .... 74

Automatic bandwidth adjustment

(SHARX) ............................................... 74

PTY - Program Type............................. 74

Switching PTY on/off ......................... 75

Program type ........................................ 75

Checking the program type of the

Important notes ............................ 63

What you need to know ........................ 63

Traffic safety ......................................... 63

Installation............................................. 63

Telephone mute .................................... 63

Accessories .......................................... 63

Guarantee ............................................. 63

International telephone information ...... 63

Selecting the operating mode..... 69

Optimising the viewing angle ..... 69

Radio operation with RDS ........... 70

station ................................................ 75

Selecting and storing PTY program

types .................................................. 75

PTY seek tuning ................................ 76

Radio text.............................................. 76

KeyCard theft protection

system ........................................... 64

Operating the unit for the first time....... 64

Incorrect KeyCard ............................. 64

Removing the KeyCard ........................ 64 Switching between the menu levels ..... 70

Traffic information station

reception with RDS-EON ............. 77

“Training” a second KeyCard /

Replacing a KeyCard............................ 65

AF - Alternative frequency .................... 70

REG - regional program ....................... 71

Incorrect KeyCard ............................. 65 Selecting a waveband .......................... 71

Displaying the radio pass data ............. 65 Station tuning ........................................ 71

Traffic announcement priority on/off .... 77

Warning beep ....................................... 77

Switching the warning beep off ............ 77

Automatic seek tuning start .................. 78

Adjusting the volume for traffic

Short Additional Memory (S.A.M.)........ 65

Turn On Message (T.O.M.) .................. 65

Automatic tuning

Manual tuning with << / >>................ 72

....................... 71

Flashing light as theft protection .......... 65 Scrolling through the broadcasting

Care of your KeyCard ........................... 66

networks (FM only) ............................... 72

announcements and the warning beep .. 78

Lost or damaged KeyCard ................... 66 Changing the memory bank (FM)......... 72

Training the new KeyCard .................... 66 Storing stations ..................................... 72

Automatically storing the strongest

stations with Travelstore....................... 73

Recalling stored stations ...................... 73

Contents

Tape operation ............................. 78 Entering CD names .............................. 83 Overview of the DSC default

Deleting CD names/TPM at the same

time ....................................................... 83

settings.................................................. 93

Inserting a cassette .............................. 78

Removing a cassette ............................ 78

Switching on tape deck operation ........ 78

Dolby B NR*.......................................... 78

Selecting the display mode .................. 79

Track reverse ........................................ 79

Scanning cassette titles with SCAN ..... 79

Selecting titles with S-CPS ................... 79

Repeating titles with RPT ..................... 80

Fast tape forward/rewind ...................... 80

Listening to the radio while fast

forwarding or rewinding the tape

with Radio Monitor (RM)....................... 80

Automatically skipping over blank

portions of the tape with Blank Skip

(BLS) ..................................................... 80

Care instructions................................... 80

Specifications............................... 94

Clock - Time.................................. 84

Amplifier ................................................ 94

Displaying the clock .............................. 84 Tuner..................................................... 94

Setting the clock ................................... 84 Tape deck ............................................. 94

Selecting a 12 or 24-hour mode ........... 85

Synchronisation .................................... 85

Technical Terminology ................ 94

DSA................................................ 85

Glossary -

Index.............................................. 97

An overview of the equalizer functions 85

Activating the equalizer settings........... 85

Installation instructions ............ 384

Switching the equalizer on/off .............. 86

Self-adjusting equalizer ........................ 86

Hi-fi self-adjustment.............................. 86

Starting the hi-fi self-adjustment........... 86

Manual equalizer adjustment ............... 87

Activating an equalizer setting ............. 87

CD changer operation.................. 81

DNC ............................................... 88

Switching on CD changer

Adjusting DNC ...................................... 88

Adjusting DNC sensitivity ..................... 88

Switching DNC on/off ........................... 88

Safety information................................. 88

operation ............................................... 81

Selecting the display mode .................. 81

Selecting CDs ....................................... 81

Selecting tracks .................................... 82

Repeating tracks/CDs........................... 82

TPM (Track Program Memory)............. 82

Switching TPM playback on/off......... 82

Storing tracks with TPM .................... 82

Deleting the TPM .............................. 82

MIX........................................................ 83

SCAN .................................................... 83

DSC programming ....................... 89

TUN (Tuner).......................................... 89

DISP (Display) ...................................... 90

VAR (Various) ....................................... 90

KC (KeyCard) ....................................... 91

CLK (Clock) .......................................... 92

CDC (changer)...................................... 93

Quick Reference

2 ON

Switching the unit on:

Switching the sound on/off:

Press ON briefly. If the sound has

been switched off, “Mute” will appear

in the display.

You can switch on the sound again by

turning the volume knob 3.

1 Unlocking the fold-down operating

panel

With the KeyCard inserted, press ON

briefly.

The unit will begin to operate in the

mode last selected at the power-on

volume.

After the operating panel has been un-

locked it is possible to insert or remove

the KeyCard or a cassette.

Press 1 to unlock the panel, it will

fold down forwards. The operating

panel cannot be removed and must not

be used as a storage shelf. To close

and lock the operating panel, push it

back to its original position (arrow 3).

Switching the unit on/off with the

KeyCard:

The unit can also be switched on/off by

inserting or removing the KeyCard.

Also refer to No. B in the Quick Ref-

erence for the section on the KeyCard

theft protection system.

When the unit is switched on for the

first time, “INSTALL” will appear in the

top line of the display. Now it is possi-

ble to alter important basic settings,

such as the clock, proof of ownership,

reset to the default settings, etc.

If necessary, refer to the section on

“First-time installation”.

Switching the unit on/off with the ig-

nition:

The unit can be switched on/off with

the vehicle ignition if the unit has been

installed accordingly.

After you switch off the ignition, you

will hear a beep to remind you to re-

move the KeyCard before you leave

the vehicle.

Press EXIT to quit this menu.

For safety’s sake, the operating

panel must always remain

closed while the vehicle is mov-

ing.

When you leave the vehicle,

open the operating panel and re-

move the KeyCard as added theft

protection.

Switching the unit off:

Press ON for approx. 1 sec.

Switching the unit on when the igni-

tion is off

If the ignition is switched off (but the

KeyCard in place), it is possible to op-

erate the unit as follows:

The angle of the display can be adjust-

ed to optimise its legibility. If neces-

sary, refer to the section on “Optimis-

ing the viewing angle”.

Quick Reference

After the beep press ON. The unit will

switch on.

After the unit has played for an hour, it

will switch off automatically to prevent

the vehicle battery from running down.

4 Softkeys / Display

Softkey = a key with changing func-

tions

Menu level 1

Station keys and memory banks

You can select the functions which ap-

pear in the display.

3 Adjusting the volume

Radio operation

Turn the knob to adjust the volume.

Switching between the menu levels

During radio operation, you can press

TU to switch between menu level 1

and menu level 2.

NEXT - FM

Switches between FM1, FM2, FM3,

FMT

Menu level 1 contains four pages

(FM1, FM2, FM3, FMT) which can be

used to store radio stations. Press

NEXT to switch to the next page.

NEXT - AM (MW, LW)

Switches between the MW and LW

wavebands

The volume setting will appear in the

top line of the display. When the unit is

switched on, it will play at a pre-de-

fined volume (VOL).

VOL can be adjusted as well (refer to

“DSC programming - VAR, VOL”).

Keys 1 - 6

Menu level 2 has two pages containing

functions related to radio operation.

Page 1 includes FM, TS, TA, AM, PS,

SCAN.

Page 2 includes AF, LOC, PTY, REG,

RT, MONO. Press PRE or NEXT to

switch between the pages.

To store and recall radio stations on

the FM waveband: FM1, FM2, FM3,

FMT.

It is possible to store and recall 6 sta-

tions each on the MW and LW wave-

bands.

To store stations: Press the key for ap-

prox. 1 sec.

To recall stations: Press the key brief-

ly.

The unit will switch back to menu level

1 automatically 8 sec. after the last key

has been pressed.

Quick Reference

Menu level 2

Adjusting the radio functions

“TA” will appear when the priority for

traffic information has been activated.

Switching priority on/off: Press TA.

To interrupt a traffic message: Press

STOP. Stop will only appear in the dis-

play during traffic message broad-

casts.

SCAN

ENT (Enter)

All of the radio stations within recep-

tion range on the selected waveband

will be scanned.

NEXT - FM

Switches to additional radio functions:

AF, LOC, PTY, REG, RT, MONO

Press this key to accept/store the set-

tings made.

To stop the Scan function:

EXIT

Press EXIT.

Press this key to end/cancel any set-

tings made.

PRE

Switches to the previous radio func-

tions:

Switch to

AF, LOC, PTY, REG, RT, MONO:

Press NEXT.

If you want to activate these functions

from menu level 1, first press TU and

then NEXT.

FM, TS, TA, AM, PS, SCAN.

Switches to AM (MW or LW).

Press NEXT to select the other AM

waveband.

Switches to FM.

TS (Travelstore)

PS (Preset-Scan)

The radio stations stored on the preset

keys in reception range will be

scanned one after the other.

Automatically stores the six stations

with the strongest reception in the

“FMT” memory bank.

To stop the Preset Scan function:

Press EXIT.

TA (Traffic Announcement = Priority

for traffic information)

“TP” will appear in the display when

the radio is tuned into a station which

broadcasts traffic information.

Quick Reference

MONO

RPT (Repeat)

(Alternative Frequency for RDS opera-

tion)

Switching AF on/off: Press AF briefly.

Switches between stereo/mono

When the unit is switched on, it auto-

matically switches to stereo.

Repeats the scanned or the next song.

The song will continue to repeat until

RPT is switched off. The Repeat func-

tion will end automatically when the

cassette is removed or the tape deck is

switched off.

To switch Repeat on/off: Press RPT.

The function will be displayed briefly in

the top line of the display and the DOT

display.

LOC - Local

Tape deck operation

Press LOC to switch the seek tuning

sensitivity between “Local” and “Dis-

tance”.

PTY

(Program Type)

PTY changes the station keys into pro-

gram keys.

Switching PTY on/off: Press PTY brief-

ly. PTY will light up under top line in

the display.

When RPT has been activated, the

corresponding red arrow will light up.

During tape deck operation, the tape

deck functions can be selected when

you press the corresponding softkeys.

RM (Radio Monitor)

Plays the radio while the tape is fast-

forwarding or rewinding. When the red

arrow lights up in front of “RM”, the ra-

dio will play when the tape is fast-for-

warding or rewinding.

To switch RM on/off: Press RM. The

function will be displayed briefly in the

top line of the display and the DOT dis-

play.

REVerse

REG (Regional)

Switches to the other tape track (side).

The display indicates which side (A/B)

is currently playing.

Gives priority to regional programs.

Switching REG on/off: Press REG

briefly.

SCAN

RT - Radio text

Transmits the text broadcast by the ra-

dio station selected.

Radio text cannot be activated unless

the ignition is off or you have switched

to “IGN off” in the Install menu.

Scans the songs on the cassette

briefly.

To start/stop Scan: Press SCAN.

When Scan is switched on, the corre-

sponding red arrow will flash.

Quick Reference

BLS (Blank Skip)

CD changer operation (CDC)

- MIX MAG = All of the tracks on the

CDs in the magazine are played

back in random order.

Skips over blank portions of the tape.

When the red arrow lights up in front of

“BLS”, this function has been activat-

ed.

- MIX OFF = switches the function off.

As soon as the system detects a

pause of more than 10 seconds in the

tape playback, it will automatically fast-

forward the tape to the next song.

To switch Blank Skip on/off: Press

BLS. The function will be displayed

briefly in the top line of the display and

the DOT display.

SCAN

Scans the tracks on all of the CDs.

Start SCAN:

Press SCAN. The tracks will be

scanned in ascending order.

During CD changer operation, use the

corresponding softkeys to select MIX,

SCAN, RPT (repeat), TPM and NAME.

End SCAN:

Press SCAN. The track last scanned

will begin to play.

Press CDC:

During CD changer operation, menu

level 1 indicates which magazine slots

contain CDs, use NEXT to page

through.

Press CDC to switch the menu level.

Now you can activate the functions

from “MIX” to “NAME”.

DLBY ( Dolby B NR*)

Cassettes recorded using Dolby B NR

can be played back in the best possi-

ble quality. The function has been acti-

vated when the red arrow lights up in

front of “DLBY”.

To switch Dolby on/off: Press DLBY.

The function will be displayed briefly in

the top line of the display and the DOT

display.

RPT - Repeat

CD tracks and entire CDs can be

played repeatedly.

Press RPT to select from the following

functions:

- REP TRCK = repeats track

- REP CD = repeats CD

- RPT off = switches the function off.

MIX

CD tracks are played in random order.

Press MIX to select the following func-

tions:

- MIX CD = The tracks on the CD se-

lected are played in random order.

The CDs are selected in numerical

order, the tracks then played back in

random order.

The noise reduction system is manufactured

under licence from the Dolby Laboratories Li-

censing Corporation. The word DOLBY and the

double-D symbol are trademarks of the DOLBY

Laboratories.

TPM - Track Program Memory

Stores and plays back your favourite

tracks. It is possible to archive up to 99

CDs with a maximum of 40 tracks each

(refer to the section on “TPM program-

ming”).

Quick Reference

CLR

Radio operation

7 Rocker switch

Deletes the TPM (refer to the section

on “Deleting the TPM”).

EUROPE 1 - radio station name

102.40

Pop M(usic) - PTY code

- frequency

NAME

You can enter names with a maximum

of 7 characters for up to 99 CDs.

When these CDs are played, the name

entered will appear in the top line of

the display if the display has been set

to “Name” (refer to the section on “CD

naming”).

10:53

- clock

Radio operation

Tape deck operation

If you press the rocker switch while

you are on menu level 2, the unit will

automatically switch back to menu

level 1.

Side A / B - Tape side

Forward

Rewind

CPS FF/FR - Cassette Program

Search forwards/back

- Fast forward

- Fast rewind

5 Top line

Indicates a function of the operating

mode selected, e.g. the radio station

selected during radio operation.

Radio station seek tuning

Down

CD changer operation

<< / >> Up/down in increments

(for FM only, when AF and

PTY are switched off)

VIVALDI

CD 2 T 2

- CD name

You can use DIS to select what is dis-

played in the top line.

- CD number and track

number

For FM only:

10:53

<< / >> Pages through the station net-

work when AF and PTY are

switched off, e.g.: NDR 1, 2, 3,

4, N-JOY ... .

- clock

6 DSA (Digital Sound Adjustment)

DNC (Dynamic Noise Covering)

Adjusts the volume to the driving

noise. Refer to the section on “DSA” or

“DNC”.

Quick Reference

9 AUD

Adjusts Treble, Bass, Fader (front/

SUB-Out

Tape deck operation

If a SUB-woofers is connected to the

system, it is possible to adjust the out-

put level with “SUB” and

Selects title (S-CPS)

rear), Balance (left/right), Loudness

(boosts lower frequency ranges at low

volume to create a more natural

Forward

Rewind

Fast forward

Fast rewind

sound) and SUB (-out) to adjust the

amplifier level for the SUB-woofer.

To quit the AUD menu:

Press AUD or EXIT.

CD changer operation

: DIS

Select from a number of displays

<< / >> Selects CDs

Up: Press briefly

Down: Press briefly

Radio operation

Press DIS repeatedly to select:

- the name of the station selected

- the current frequency

- PTY code

- clock

This will not operate properly unless

the radio is tuned into an RDS station

with adequate signal strength.

Selects tracks

Up: Press briefly

CUE - fast forward (audible):

Hold pressed down

Down: Press briefly twice or

repeatedly in succession

Restart a track: Press briefly

Review - fast reverse (audi-

ble): Hold pressed down

Making adjustments:

Select the operating mode.

Press AUD once and select the func-

tion you wish to adjust with the corre-

sponding key. “Bass” and the current

setting, for example, will appear in the

top line of the display.

Press DIS for approx. 4 sec.:

to synchronise the clock (internal clock

with the DCF-77 atomic clock).

8 DSC (Direct Software Control)

Use DSC to adjust those basic settings

which can be programmed. For more

information refer to “DSC program-

ming”.

Tape deck operation

Press DIS:

- Tape side

- Clock

Use << / >> to alter the setting.

The last setting selected will be stored

automatically.

Quick Reference

CD changer operation

< DOT field

Additional display for top line.

CD changer operation

Press DIS:

- CD number, track number

- CD number (if entered)

- Clock

Radio operation

00:25

- Time (elapsed playing

time)

; Display

Radio operation

TRACK 3 - CD track number

FM1, 2, 3,T - FM memory banks

= CDC

MW, LW

- Wavebands

Switches to changer operation (only if

a changer is connected),

selects the menu levels.

Special pictures for a given situation,

TP, TA - TP = Traffic Program (ra-

dio is tuned into a traffic

program station)

- TA = priority for traffic pro-

gram stations is active

PTY

- Program type is active

- Alternative frequency for

RDS

e.g. driving cars during traffic an-

nouncements

CC-IN

- Cassette is in the tape

deck

If there is no CD changer connected,

this key will switch the system to AUX

if “AUX on” has been selected in the

INSTALL menu.

Tape deck operation

00:25

- Tape counter

Side A / B - Tape side

Quick Reference

> CC

B KeyCard theft protection system

To operate this unit, the KeyCard must

be inserted.

C Eject

Press the Eject button briefly, the cas-

Switches to tape deck operation

sette will eject.

KeyCard

Inserting the KeyCard

Press 1 to unlock the operating pan-

el, the operating panel will fold down

forward.

Slide the KeyCard in with the con-

tacts facing down (see illustration).

Lock operating panel back in place.

? TU (tuner)

Switches to radio operation, selects

the menu levels

For safety’s sake, the operating

panel must remain locked when

the vehicle is in motion. When

you leave the vehicle, unlock the

panel and remove the KeyCard

to protect the equipment against

theft.

@ Cassette slot

Insert a cassette (Side A or 1 facing

up; opening to the right).

A Visual theft protection

If you want to use the flashing LED to

deter thieves, make sure that

the car radio is installed correctly and

switched off;

the operating panel is opened;

the KeyCard has been removed;

LED is switched to on in the DSC

menu (default setting).

To remove KeyCard perform these

steps in the reverse order.

Make sure to read the information in

the section on the “KeyCard theft pro-

tection system”.

For more information, refer to the sec-

tion on “DSC programming, KeyCard,

LED on/off”.

RC 08 remote control unit

F <</>>,

Select track

up: Press briefly

Radio operation

CUE - fast forward (audible):

Hold pressed down

down: Press twice or repeat-

edly briefly

Station seek tuning

down

To restart the track: Press

briefly

REVIEW - fast reverse (audi-

ble): Hold pressed down

<</>> down/up in short intervals (for

FM only when AF is switched

off)

For FM only:

<</>> Pages through the station net-

work with AF on e.g.: NDR 1,

2, 3, 4, N-JOY, ... .

Sound mute on/off:

Press

briefly. When the sound has

D V- / V+

been switched off “Mute” will appear in

the display.

Volume control.

Tape deck operation

E SRC (Source)

Tape deck operation

Select title (S-CPS)

Forward

Rewind

Switches operating modes

Press SCR repeatedly to select.

To switch tape sound on/off:

Press

To switch tape sides:

Press for approximately 1 second.

briefly.

- Radio

- Cassette

- Changer (if a changer is connected)

Fast forward

Fast rewind

CD changer operation

<</>> Select CD

up: Press briefly

down: Press briefly

Important notes

structions on installation and connection at Guarantee

What you need to know

the end of this manual carefully.

The scope of the guarantee is determined

Before using your new car audio system,

please read through the following informa-

tion carefully.

by the laws in the country where the unit

was purchased.

Telephone mute

If you have installed a car telephone in your Regardless of the legal guarantee regula-

vehicle, it is possible to automatically mute tions, Blaupunkt affords a 12-month guar-

the radio or CD playback when you use the antee. Your cash register receipt is a valid

Traffic safety

As the driver of a motor vehicle, it is your

responsibility to pay attention to the traffic

situation at all times. Never use your car

audio system in a way that could distract

you.

Please keep in mind that you travel a dis-

tance of 14 m per second at a speed of only

50 km/h.

telephone (telephone mute).

guarantee coupon.

“Phone” will then appear in the display.

Traffic announcements continue to have

priority if you have activated TA. You can

activate TIM when the system is switched

to telephone mute.

If you have any questions about the guar-

antee, please contact your dealer. He will

be happy to assist you, repair your equip-

ment or forward it to an authorised Blaupunkt

repair shop. In addition, our employees are

there to help you on our service hotline.

Should the traffic situation become particu- Accessories

You will find the telephone and fax numbers

on the last page of this manual.

larly demanding, we advise you not to use

Use only Blaupunkt-approved accessories

and spare parts.

You can use the following Blaupunkt prod- International telephone informa-

ucts with this unit:

the audio system.

Always make sure that you are still able to

hear any warning signals coming from out-

side the vehicle, such as police or fire en-

gine sirens, so that you can react accord-

ingly.

Consequently, you should always select a

moderate volume for playing your car audio

system while you are driving.

tion

Have you got any questions on the opera-

tion of this equipment or do you require more

information?

CD changers

The following CD changers can be connect-

ed directly: CDC A 06, A 071, A 072, A 08.

The A 05 can be connected with the adapt- Give us a call!

er cable 7 607 889 093.

You will find the international telephone and

fax numbers on the last page of this manu-

al.

Installation

Amplifiers

All Blaupunkt amplifiers.

If you would like to install your new car ster-

eo yourself or add other audio components

to existing ones, then please read the in-

KeyCard theft protection system

This car radio comes equipped with one Operating the unit for the first

Removing the KeyCard

KeyCard, but it can also be operated with a time

To unlock the operating panel:

second card.

To insert the KeyCard, unlock the operating

•

Press 1, the operating panel will fold

down forwards.

If you have lost your KeyCard or if it was

panel by

damaged, you can buy a replacement Key-

•

pressing 1, the operating panel will

Push the card to the right as far as

possible and remove it to the front.

Card from your specialised dealer.

fold down.

If you use two KeyCards, the settings stored

on the first card will be transferred to the

second. However, you can individually store

the following functions:

Insert the KeyCard with the contacts

facing down as shown in the illustra-

tion (arrow 1).

Push the operating panel back into po-

sition.

For safety’s sake, the operating

panel must remain locked when

the vehicle is in motion. When

you leave the vehicle, unlock the

panel and remove the KeyCard

to protect the equipment against

theft.

Preset button assignments, bass, treble,

balance and fader settings, Loudness, TA

(traffic announcement volume), beep vol-

ume, LOW and HIGH (equalizer settings).

In addition, the settings activated before the

radio is switched off, such as the waveband,

station, TA priority, AF, REG on/off, SCAN

(time), seek tuning sensitivity, VOL (Power-

On volume) and SHARX will also remained

stored.

•

Push the card in the direction of the ar-

row (2) and lock the operating panel

back into position (arrow 3).

This ensures that you will find your basic

settings re-adjusted automatically as soon

as you have inserted your KeyCard.

Turn on the set with ON.

The car radio is now ready for operation.

Incorrect KeyCard

If a wrong KeyCard is inserted, then “Wrong

KC” will appear in the display.

Remove the wrong card and insert the cor-

rect KeyCard.

KeyCard theft protection system

“Training” a second KeyCard /

Replacing a KeyCard

Incorrect KeyCard

Turn On Message (T.O.M.)

If a wrong KeyCard is inserted, then “Wrong

KC” will appear in the display.

The second KeyCard available from your

specialised dealer also allows you to dis-

play a special turn-on message each time

the radio is switched on.

When the unit is in operation with the first

KeyCard, you can “train” a second one to

use with the set as well.

Remove the wrong card and insert the cor-

rect KeyCard.

The freely selectable text with a maximum

of 48 characters can be programmed by any

dealer who has the required equipment

available.

Each time you turn on your system with the

second KeyCard, the programmed text will

appear in the display. Important: “TOM on”

must be selected in the DSC menu.

To find out how to do this, refer to the sec-

tion on “DSC programming - KC (KeyCard),

TOM”.

If you want to “train” a second KeyCard:

Displaying the radio pass data

•

Insert the first KeyCard and turn on the

set.

You can use the KeyCard supplied with your

set to display the radio pass data such as

the model name, product number (7 6..) and

serial number.

Please refer to the section on “DSC pro-

gramming - KC (KeyCard), READ”.

Press DSC, KC (KeyCard) and LRN

(learn) one after the other.

Remove the first KeyCard and insert

the new one.

The display will read “Learn OK”.

To exit the menu

Short Additional Memory

(S.A.M.)

•

press DSC.

Now you can also use the new KeyCard for

operating your unit.

Flashing light as theft protection

The second KeyCard available from your

specialised dealer allows you to read out

short information under the DSC menu item

“KC, READ”. This information will run

through the display and could include, for

example, the phone number of your car re-

pair service or the emergency call number

of your automobile association.

The freely selectable text with a maximum

of 162 characters can be programmed by

any dealer who has the required equipment

available.

Flashing light diode A

A maximum of two cards can be used with

the set.

When the vehicle is stationary and the Key-

Card has been removed, the light diode can

be switched to flash as an extra anti-theft

device.

For this to function properly, it is necessary

that the positive power supply line and the

permanent +12 V lead are connected as

described in the installation instructions.

If you attempt to “train” a third one, the ac-

cess authorisation for the KeyCard not used

for the “training” process will be deleted au-

tomatically.

KeyCard theft protection system

Make sure that the unit is switched off; the Lost or damaged KeyCard

- Enter digits

(press as often as required)

operating panel is unlocked; the KeyCard

If the KeyCard for your unit is lost or dam-

has been removed; “LED ON” has been se-

aged you can train a new KeyCard.

<< >> - Select the entry position.

lected in the DSC mode (default setting).

•

Press ENT after you have entered the

correct master code.

You can purchase the new KeyCard from

If necessary, please refer to the section on

any authorised dealer. You will also require

“DSC programming - KC (KeyCard) LED”.

the master code for the unit, which you will

The new KeyCard has been accepted when

the unit begins to play.

find in the radio pass.

Switching off the flashing light

The flashing light can be switched off by

Always keep the radio pass in a safe

selecting “LED OFF” in the DSC menu.

place. Do not leave it in your vehicle.

Care of your KeyCard

Training the new KeyCard

To ensure that the KeyCard will function

•

Insert the new KeyCard into the unit

and lock the operating panel into posi-

tion.

properly it is important that the contacts are

free from any foreign particles. Avoid direct

skin contact.

•

Switch the unit off.

If necessary, clean the KeyCard contacts

using a cotton swab dipped in rubbing alco-

hol.

Press TU and Key1 at the same time

and switch the unit on. “0000” will ap-

pear in the display.

•

Now use the rocker switch to enter the

four-digit master code from the radio

pass:

First-time installation

Setting the clock

Entering your Owner Identifica-

tion

After you switch on the unit for the first time

or when the unit has been disconnected from

the power supply, “INSTALL” will appear in

the top line of the display.

The clock is set automatically when the ra-

dio is tuned into an RDS station which has Use this function to enter six lines with eight

the CT function (clock time). characters each as your proof of ownership.

If this signal is not available, the audio sys- To do so

tem will attempt to receive the DCF-77 time

signal (atomic clock) to correct the time the

next time it is switched off. The display will

indicate “CLK Sync” while it is synchronis-

ing the time.

In this menu you can enter/alter the follow-

ing:

Clock, owner ID, reset to default settings,

ignition connection on/off, internal output

stage on/off.

•

press O-ID, the first entry position will

flash in the top line of the display.

Use

to select the letters, digits and sym-

bols, use << / >> to select the entry posi-

tion.

Activating the Install menu

If you would like to set the clock manually, Enter the data you want to use to identify

the unit.

•

press CLK, the field to be adjusted will

flash in the top line of the display

(hours or minutes)

You can activate the Install menu at any

time.

Example:

•

Just hold DSC pressed down for 4 sec.

Line

Information

•

Press << / >> to switch fields if neces-

sary and use

time.

to enter the correct

MONIKA

MÜLLER

LANDS 18

HILDES-

HEIM

Once you have completed the setting,

•

press ENT, the INSTALL menu will re-

turn to the display.

HI-XX000

For more information on the clock, please

refer to the section on the “Clock - Time”.

Closing the Install menu

Once you have completed your entry for the

first line,

•

Press EXIT.

•

press NEXT, the display will switch au-

tomatically to the next line.

The DOT display indicates the number of

the line selected (1 - 6).

First-time installation

If you would like to alter the entry in a spe- Switching the ignition connec-

Connecting external equipment

cific line,

tion on/off

If external equipment is connected, you have

•

press NEXT as often as required.

Use IGN (ignition) to be able to switch the to switch AUX to on. The default setting for

car radio on and off with the ON button only AUX is off.

To complete your entry,

•

press ENT.

or with the ignition as well.

AUX will not appear as a menu item if a Blau-

Switching on/off:

punkt CD changer has been connected.

If the unit is switched on without the Key-

Card, this owner ID information will appear

in the top line of the display for approximately

8 sec.

•

Press IGN, “Ign on” or “Ign off” will ap-

pear in the top line of the display.

Closing the INSTALL menu

Use << / >> to switch on to off or off to

on.

•

Press EXIT.

Press ENT to store this setting and re-

Reset to default settings

turn to the INSTALL menu.

“NORM (set)” will reset any settings you

have altered!

Exception: The stations stored on the sta-

tion presets will remain stored.

Switching the internal output

stage on/off

Use AMP (amplifier) to switch the internal

output stage on or off. If an additional am-

plifier has been connected and only the

preamp outputs are being used, it is a good

idea to switch the internal amplifier off.

If you would like to reset to the default set-

tings,

•

press NORM and then press ENT for

approx. 2 sec.

Switching on/off:

•

Press AMP, “Amp on” or “Amp off” will

appear in the top line of the display.

Use << / >> to switch this setting to on

or off.

Press ENT to store the new setting

and return to the INSTALL menu.

Selecting the operating

mode

Optimising the viewing

angle

You can select from among the following The viewing angle of the display can be al-

operating modes: radio (TU), tape deck (CC) tered to allow optimum legibility.

and CDC (CD changer).

•

Press DSC, DISP, ANGL one after the

other.

CC cannot be selected unless there is a

cassette inserted in the tape deck.

•

Press

on the rocker switch to set

CDC cannot be selected unless one of the

Blaupunkt changers, the A 06, the A 072,

the A 08, the A 05, or the A 071 has been

connected and there is at least one CD in

the magazine.

the best viewing angle for your posi-

tion.

When you have completed the setting

press ENT and EXIT twice.

•

To switch the operating mode:

•

press TU, CC or CDC.

If you press TU again, the unit will switch to

menu level 2. On this level there are two

pages which you can use to adjust the func-

tions for radio operation. The unit will switch

back to menu level 1 automatically approx.

eight seconds after the last adjustment was

made.

Radio operation with RDS (Radio Data System)

The Radio Data System offers you more To move to the next page:

To return to page 1:

press PRE.

The page selected will appear in the DOT The unit will switch back to menu level 1

convenience when you listen to FM radio

stations. More and more radio stations have

begun to broadcast RDS information along-

side their programs.

As soon as a program has been identified,

the station name including a regional identi-

fier, if available, will appear in the display,

for example, NDR1 NDS (regional program

in Lower Saxony, Germany).

When RDS is activated, the preset buttons

become program buttons. You now know

exactly which program you have tuned into,

making it easy to find the desired station

quickly.

•

press NEXT.

•

display (FM1, FM2, FM3, FMT).

automatically 8 sec. after the last key was

pressed. Press EXIT to return to menu lev-

el 1 immediately.

Menu level 2 has two pages for adjusting

radio functions.

To activate menu level 2:

AF - Alternative frequency

•

Press TU.

The AF (Alternative Frequency) function

makes sure that radio is always tuned into

the strongest frequency for the radio station

currently selected.

Activating AF in the display:

For radio operation

•

Press TU, menu level 2 will appear, in-

dicating the radio functions.

Switching between the menu

levels

The following functions are available: FM,

TS, TA, AM, PS, SCAN.

•

Press NEXT to move to page 2 (AF,

LOC, PTY, REG, RT, MONO).

During radio operation, you can use TU to

switch between menu level 1 and menu lev-

el 2.

Menu level 1 contains four pages (FM1,

FM2, FM3, FMT), on which it is possible to

store up to six radio stations each.

To move to page 2:

Switching AF on/off:

•

press NEXT.

•

Press AF briefly, the red arrow will

light up when AF is switched on. In ad-

dition, “AF” will appear under the top

line of the display.

The following functions are available: AF,

LOC, PTY, REG, RT, MONO

Radio operation with RDS (Radio Data System)

While searching for the strongest reception If you leave the service area of the regional Selecting a waveband

signal, the radio may switch to mute briefly. program you are tuned into, or if you would

With this car radio you can select between

the following wavebands:

like to take advantage of the full RDS serv-

ice, switch to “REG off”.

If “Search” appears in the display when you

switch on the radio or recall one of the stored

FM 87.5 - 108 MHz

MW 531 - 1602 kHz

LW 153 - 279 kHz.

frequencies, this indicates that the unit is To activate REG in the display:

automatically searching for an alternative For radio operation

frequency.

•

Press TU, menu level 2 with the radio

•

Press TU to select the desired wave-

band, menu level 2 will appear in the

display (FM, TS, TA, AM, PS, SCAN).

functions will appear.

“Search” will disappear from the display

when the alternative frequency has been

found or after the frequency band has been

run through completely.

•

Press NEXT to move to page 2 (AF,

LOC, PTY, REG, RT, MONO).

To switch REG on/off:

If the reception quality of the selected radio

station deteriorates beyond a certain point:

•

Press REG, the red arrow will light up

when REG is switched on. “REG on” or

“REG off” will also appear briefly in the

top line of the display.

•

Tune into another station.

REG - regional program

•

Press FM to select the FM waveband

or AM for the MW or LW wavebands.

Press NEXT on the AM waveband to

switch between MW and LW.

Certain radio programs are split up at times

into regional programs offering local infor-

mation. The 1st program broadcast by NDR,

for example, offers regional programs with

different contents for the northern states of

Germany in Schleswig-Holstein, Hamburg

and Lower Saxony at certain times of the

day.

Station tuning

Automatic tuning

•

Press

cally search for the next station.

If you hold on the rocker switch pressed

; the car radio will automati-

If you are listening to a program and want

to continue to listen to that program, it is ad-

visable to switch to “REG on”.

down, seek tuning will accelerate upwards

or downwards.

Radio operation with RDS (Radio Data System)

Manual tuning:

Scrolling

If it is possible to receive several different sta-

tions in the station network, you can use >>

(forward) or << (back) to scroll through the

broadcasting network, e.g. NDR 1, 2, 3, 4 ...

•

Press << >>; the frequency will change

in short intervals downwards or up-

wards.

If you hold << or >> on the rocker switch

pressed down, the frequency scan will ac-

celerate.

Seek tuning

Changing the memory bank (FM)

You can shift between the memory banks

FM1, 2, 3 and T in order to store stations

and recall them later.

Down

Scrolling through the broadcast-

<< / >> Down/Up in short intervals

(for FM only, when “AF” is

switched off)

ing networks (FM only)

You can use the << >> buttons to tune into

stations in your reception area.

•

Press NEXT as often as necessary un-

til the desired memory bank lights up

in the DOT display.

Manual tuning with << / >>

Important:

You can also tune into a station manually.

a) You must have tuned into the station

at least once before. To do this, you

can press TS to start Travelstore in

menu level 2.

Important:

Storing stations

AF and PTY must be switched off (i.e. the

symbols do not light up in the display).

On each of the FM memory banks (FM1, 2,

3 and T), you can store six stations on the

preset buttons 1 - 6.

If necessary, refer to the section on

“Automatically storing the strongest

stations with Travelstore”.

On MW/LW, you can also store six stations

each.

•

Press TU, menu level 2 will appear in

the display.

b) AF is switched on and PTY is switched

off. In this case, “PTY” will not light up

under the top line of the display.

If necessary, switch these functions on

or off in menu level 2.

•

Select FM or MW/LW with AM.

If necessary, deactivate these functions in

menu level 2.

For AM, press NEXT to select MW or LW.

•

Use the rocker switch to tune into a

station (either automatically

manually << >>).

Radio operation with RDS (Radio Data System)

•

Press TS briefly.

To select a station on a different waveband:

“T-Store” will flash in the display.

•

Press NEXT as often as necessary un-

til the desired memory bank appears

and then select the station by pressing

keys 1 - 6.

The six strongest FM stations will be auto-

matically stored on the memory bank “FMT”

(Travelstore). When this process has been

completed, the radio will play the station with

the strongest reception on station preset 1.

MW, LW (AM)

•

Press the desired preset button until

the radio resumes play after the muting

(takes approximately 2 sec.) or until

you hear a beep.

You can select the stations stored for the

selected waveband directly:

•

by pressing keys 1 - 6.

Now the station has been stored.

To select a station on a different waveband:

•

Press NEXT as often as necessary un-

til the desired memory bank appears

and then select the station by pressing

keys 1 - 6.

Note:

Should you tune into a station which has

already been stored before on another mem- If desired, stations can also be stored man-

ory bank, the corresponding preset button ually on the Travelstore bank (refer to the

and the memory bank will flash briefly in the section on “Storing stations”).

DOT display.

Scanning stored stations with

Preset Scan

Recalling stored stations

Automatically storing the

You can recall any stored station at the touch

strongest stations with Travel-

of a button.

You can have all of the stored stations briefly

scanned on all wavebands and in the se-

lected FM memory bank.

store

You can automatically store the six most FM

To start Preset Scan:

powerful FM stations in your current recep-

tion area sorted according to their signal

ed directly:

strength. This function is particularly con-

•

Press TU and PS one after the other.

Recall the stations on the waveband select-

All of the stored stations on the waveband

selected and within reception range will be

scanned one after the other. “PS SCAN” and

the station name or frequency will flash al-

ternately in the DOT display.

•

by pressing keys 1 - 6.

venient on longer trips.

•

Press TU, menu level 2 will appear in

the display.

Radio operation with RDS (Radio Data System)

To select a scanned station and switch Changing the scan time (Scan)

The red arrow for mono will light up when

you have switched to MONO.

off Preset Scan:

The scan time can be set from between 5 to

a maximum of 30 seconds.

•

Press the rocker switch briefly.

•

Press MONO to switch between stereo

to mono.

If you would like to alter the scan time,

please refer to the section on “DSC program-

ming - VAR (Various), SCAN (time)”.

The mode selected will appear briefly in the

top line of the display.

Automatic bandwidth adjust-

ment (SHARX)

Selecting the seek tuning sensi-

tivity

In the DSC menu, you can use the SHARX

function to adjust automatic bandwidth

switching in the FM frequency range. This

can be a great advantage when there are a

large number of stations within your current

reception range.

You can alter the automatic seek tuning sen-

sitivity separately for AM and FM.

Scanning stations with

Radio Scan

If you would like to alter the sensitivity level,

please refer to the section on “DSC program-

ming - TUN(er) S-DX, S-LO”).

You can also scan all of the stations within

reception range.

To start the Scan function:

Interference with strong adjacent stations

can be reduced to an absolute minimum if

you activate SHARX ON (default setting).

•

Press TU and SCAN briefly.

Switching from stereo to mono

(FM)

All of the stations on the waveband select-

ed and within reception range will be

scanned one after the other. “FM SCAN” or

“AM SCAN” will appear in the DOT display.

You can switch between stereo/mono on

menu level 2. If reception is poor, you may

get better sound quality by switching from

stereo to mono. Each time the radio is

switched on, stereo playback is activated au-

tomatically.

If necessary, refer to the section on “DSC

programming - TUN(er) SHRX”.

To select a scanned station and switch

off the Radio Scan function:

PTY - Program Type

•

Press the rocker switch briefly.

PTY is an RDS service which an increasing

number of broadcasting stations have be-

gun to offer. This feature allows you to se-

lect FM stations according to their program

type. After you have chosen the PTY of your

preference, the corresponding stations can

be selected by seek tuning.

If you do not select a station, the scan func-

tion will automatically switch off after the fre-

quency band has been run through com-

pletely. The unit will tune into the station you

were listening to before you started the scan

function.

The unit will gradually switch to mono if the

signal received is not strong enough for ster-

eo playback.

If you would like to switch to mono,

•

press TU and NEXT one after the

other.

Radio operation with RDS (Radio Data System)

The letters printed in bold are identical to Checking the program type of the sta-

Switching PTY on/off

the abbreviation which appears briefly in the tion

•

Press TU and NEXT one after the

other.

display.

You can check the type of program the sta-

News

tion you are tuned into is broadcasting. To

do so,

•

Press PTY to switch the function on or

off.

Current Affairs

Information

Sport

•

press DIS repeatedly until the PTY

program type appears in the top line of

the display.

The red arrow will light up when PTY is

switched on. In addition, “PTY” will appear

under the top line in the display.

When the function is active, the program

type selected last will briefly appear in the

display, e.g. “Sport”. As long as PTY is ac-

tive, “PTY” will appear permanently in the

display.

Educate

Drama

Culture

Science

If “No PTY” appears in the display, the cur-

rent station has no PTY code.

Varied

Selecting and storing PTY program

types

Pop Music

Rock Music

Easy Music

Light Music

Classics

Other Music

Weather

Finance

When PTY is switched on, it is possible to

display the last PTY selected and the stored

program types for approx. 8 sec. One pro-

gram type is stored on each of the station

presets 1 to 6 at the factory.

Program type

Use << >> to have the last selected program

type displayed and to choose a new one.

You can select any one of the stored types

with the preset buttons 1 - 6.

Display the program types by

•

pressing << or >>.

Children’s Programs

Social Affairs

Religion

Phone in

Travel

Important: PTY must be active.

The program type selected last will appear

in the top line of the display. At the same

time, the stored program types will appear

in the display beside the corresponding pre-

set buttons.

You can use the DSC menu to select Deut-

sch, English or Francais as the language

used in the display.

Leisure

If necessary, refer to the section on “DSC

programming - TUN(er) PTY”.

Jazz Music

Country Music

National Music

Oldies Music

Folk Music

Document

Selecting stored program types

The following list indicates all of the program

types which are currently available.

Now you can select one of the stored pro-

gram types. To do so,

•

Press one of the presets 1 - 6.

Radio operation with RDS (Radio Data System)

To select any program type

If no station offering the selected program After the PTY program has ended the sys-

type can be found currently in your recep- tem will switch back to the previous mode

tion range, the set will switch back to the (radio, tape deck or CD changer).

You can select any of the program types.

To do so

station you were previously tuned into.

Use STOP to return to the previous station

•

press << or >> repeatedly until the pro-

gram type you would like to select ap-

pears in the top line of the display.

As soon as it is possible to receive a pro- immediately. Press PTY to switch the PTY

gram in the broadcasting network with the function off.

PTY selected, the radio will switch over to

the corresponding station for the duration Note:

Storing program types

of the program.

As already mentioned, these functions are

not supported by all of the RDS stations at

the present time.

You can store any of the available program

types on any of the preset buttons 1-6.

Example:

•

Select a program type as described

above.

German broadcasting network NDR:

Radio text

Station playing: NDR3.

“PTY” is switched on.

•

Press down the desired preset button

This is an RDS function which allows radio

stations to transmit texts.

1-6 until you hear a beep.

Program type “POP” selected.

Seek tuning is started.

The program type has been stored.

The text information is displayed in the top

line of the display.

PTY seek tuning

No station with “PTY-POP” can be

found.

Depending on the radio station, these texts

can have different contents, e.g. news briefs,

program guide, advertising.

The seek tuning function can be used to find

the PTY stations for the program type se-

lected.

Important: PTY is switched on and you have

selected the program type.

The display shows “No PTY” and

automatically switches back to NDR3.

NDR2 airs a “PTY-POP” program.

It is not possible to read radio text messag-

es unless the ignition connection is deacti-

vated or the ignition is switched off.

The radio will switch to the linked sta-

tion NDR2 for the duration of the

“POP” program.

Starting seek tuning:

•

Press

on the rocker switch.

For safety’s sake, we strongly re-

commend that you do not activate

radio text while you are driving.

Seek tuning will stop at a PTY station broad-

casting the selected program type.

During tape deck and CD changer opera-

tion, the set will also switch to the program

offering the selected PTY within the broad-

casting network.

Traffic information station reception with RDS-EON

The abbreviation “EON” stands for En-

hanced Other Networks, which means that

Activating radio text

Traffic announcement priority

on/off

Park your vehicle in a safe place, switch off

the ignition. The radio will switch off auto-

matically.

information is exchanged within a radio net-

If the priority for traffic announcement pro-

work.

grams is activated, “TA” will light up in the

Many FM radio stations provide their serv-

display.

•

Press ON for approx. 1 sec. to switch

ice area with traffic messages at regular in-

the radio back on.

To switch the priority on or off:

tervals.

•

Press TU, NEXT and RT (radio text)

•

Press TU to access menu level 2.

Along with their programs, all traffic infor-

mation stations transmit a special carrier sig-

nal, which is decoded by your car radio. If

this signal is identified, “TP” will appear in

the display (Traffic Program).

one after the other.

Press the TA button.

If the red arrow lights up in front of “RT”,

radio text is active.

If you press STOP while a message is be-

ing broadcast, this message will be inter-

rupted. The unit will then switch back to the

previous mode. The priority for other traffic

messages remains active.

The text will run through the top line of the

display.

In addition to these, there are also stations

which do not actually transmit traffic infor-

mation themselves, but by using RDS-EON

it is possible for them to forward the traffic

messages broadcast by another traffic in-

formation station in the same radio network.

If you tune into a different radio station, the

text transmitted by that radio station will be

displayed.

Warning beep

If the station you are tuned into does not

transmit radio text, “No Text” will appear in

the display.

If you leave the reception area of the traffic

information station you are currently tuned

into, you will hear a warning beep at inter-

vals of approx. 30 seconds.

If you want to have the priority for traffic an-

nouncements activated while listening to

one of these stations (e.g. NDR3), “TA”

(Traffic Announcement priority) must appear

on the display panel.

Switching radio text off

This warning beep will also be emitted if you

press a preset button for a station which

does not send the traffic information signal.

•

Press TU, NEXT and RT (radio text)

one after the other.

The red arrow in front of “RT” will disappear.

If a traffic announcement is broadcast, the

radio will automatically switch to the linked

traffic program station (in this case, NDR2)

for the duration of the message and return

to the original program (NDR3) afterwards.

Switching the warning beep off

a) Tune into another station offering traf-

fic information:

• Press the rocker switch or

Tape operation

• press a preset button which has a traf-

fic information station allocated to it.

For safety’s sake, the operating

panel must always be returned to

the locked position while you are

driving.

Inserting a cassette

•

Switch on the car radio and release the

operating panel by pressing 1.

The operating panel will fold down forwards.

b) Switch off the priority for traffic an-

nouncements:

•

Insert the cassette with Side A or 1

facing up without the use of force.

Switching on tape deck opera-

tion

• press TA.

“TA” will disappear from the display.

The cassette will automatically be transport-

ed to its playing position. Cassette playback

will begin.

A cassette is inserted, “CC-IN” appears in

the display.

Automatic seek tuning start

(Tape deck and CD changer operation)

•

Press CC, the cassette functions will

•

Grasp the left-hand side of the operat-

ing panel to fold it back up and lock it

into place.

appear in the display.

If you leave the reception area for the traffic

information station you have tuned into while

you are playing the tape deck or a CD, the

system will automatically start searching for

a new TA station.

If no such station is found within approxi-

mately 30 seconds, a warning beep will

sound every 30 seconds. To switch the

warning beep off, proceed as described

above.

Dolby B NR*

This unit can play cassettes which have

been recorded with Dolby B NR or without

the use of noise suppression.

Cassettes which have been recorded with

Dolby B NR* exhibit significantly less tape

noise as well as much greater sound dynam-

ics.

Adjusting the volume for traffic

announcements and the warning

beep

Removing a cassette

•

With the operating panel in the fold-

down position, press the Eject button

(arrow) briefly.

This volume was preset at the factory, but

you can use the DSC function to alter the

setting as desired (refer to the section on

“DSC programming - VAR, TVOL”).

The cassette will eject.

To prevent damage to the mechanism, do

not attempt to stop or force a cassette while

it is being inserted or ejected.

The Dolby B NR function is active when the

red arrow in front of ”DLBY” lights up.

Tape operation

Switching Dolby B NR on/off:

Scanning cassette titles with

SCAN

Selecting titles with S-CPS

(Super Cassette Program Search)

•

press DLBY.

It is possible to scan the titles on a cassette. To repeat and skip cassette titles.

As soon as you find a title you like, you can

end SCAN. This title will then continue to

play.

The noise reduction system manufactured under li-

cence from the Dolby Laboratories Licensing Corpo-

ration. The word DOLBY and the double-D symbol

are trademarks of the DOLBY Laboratories.

SCAN is active when the corresponding red

arrow flashes in the display.

Selecting the display mode

You can switch the display mode during tape

deck operation to display the tape side or

the clock.

Select title

Forward (CPS-FF ..)

Rewind (CPS-FR ..)

•

Press DIS briefly.

Either the tape counter or Side A/B will ap-

pear in the DOT display.

It is possible to skip up to 9 titles. To do so,

press on the rocker switch as of-

ten as required.

•

To start/end SCAN:

Press SCAN.

Track reverse

•

The number of titles to be skipped will ap-

pear in the display.

To change the track during playback:

To ensure that this function works properly,

there must be a pause of at least 3 seconds

between titles.

•

Press REV.

Make any corrections by pressing the op-

posite key ( / ).

When the tape reaches the end of a side it

will automatically switch to the other side

(autoreverse). “SIDE A” will appear in the

display for track 1 and “SIDE B” for track 2.

The scan time is set to 10 seconds at the

factory and can be altered from 5 to 30 sec-

onds.

Press REV to stop this function immediate-

ly.

To ensure that this function works properly,

there must be a pause of at least 3 seconds

between titles.

If necessary, refer to the section on “DSC

programming - VAR (various), SCAN”.

Note:

If there is too much tension on the tape while

it is playing, it may switch to the opposite

track before it has reached the end. Check

to see if the tape is wound correctly. It often

helps to rewind the cassette completely.

Tape operation

Repeating titles with RPT

Listening to the radio while fast

forwarding or rewinding the tape

with Radio Monitor (RM)

Care instructions

RPT = Repeat

You should use only C60/C90 tape cas-

settes in your car. Protect your cassettes

Repeats the title currently playing. This title

will repeat until RPT is switched off. The You can listen to the radio while fast for- against dirt, dust and temperatures over

Repeat function will end automatically when warding or rewinding the tape (for CPS as 50 °C. Allow cold cassettes to warm up

the cassette is removed or the unit is well) instead of switching the sound to mute. somewhat before playing them to ensure

switched off.

The Radio Monitor function is active when that the tape plays smoothly. Malfunctions

the corresponding red arrow lights up in front in playback or sound may be caused by dirt

The Repeat function is active when the cor-

responding red arrow lights up in the dis-

play.

of ”RM”.

build-up on the pinch roller and the audio

head after approx. 100 hours of operation.

To remove normal dirt build-up clean the

equipment with a cleaning cassette. In more

stubborn cases, use a cotton swab dipped

in rubbing alcohol. Never insert hard instru-

ments into the tape deck.

To switch Radio Monitor on/off:

•

Press RM.

To switch Repeat on/off:

The activated function will appear briefly in

the top line of the display and in the DOT

display.

•

Press RPT.

The active function will appear briefly in the

top line of the display and the DOT display.

To ensure that this function works properly,

there must be a pause of at least 3 seconds

between titles.

Automatically skipping over

blank portions of the tape with

Blank Skip (BLS)

As soon as there is a pause of more than

10 sec. during cassette playback, the fast

forward will be activated automatically to

move to the next title.

Fast tape forward/rewind

The Blank Skip function is active when the

corresponding red arrow lights up in front of

“BLS”.

To switch Blank Skip on/off:

>> Fast forward

<< Fast rewind

•

Press BLS.

The activated function will appear briefly in

the top line of the display and the DOT dis-

play.

Press REV to end fast forward or rewind.

CD changer operation

Selecting the display mode

Selecting CDs

You can play CDs on this audio system on

the Blaupunkt CD changers, CDC A 06,

A 072, A 08 or A 071.

These changers can be purchased at any

authorised retail outlet.

You can select the desired display mode for In menu level 1, two pages indicate which

CD changer operation:

magazine slots have CDs in them. Use

NEXT to page through this list.

•

Press DIS as often as necessary until

you have selected the desired display

mode.

If you have named the CDs, the first four

letters in the name will appear in the display

instead of the CD number.

Note:

Use only standard circular CDs measuring

12 cm in diameter!

CDs measuring 8 cm in diameter or CDs in

different shapes such as a butterfly or beer

mug are not suitable for playback using this

equipment.

Top line

This is very likely to result in the destruction

of the CD or the CD drive.

We assume no liability for damage to the

equipment caused by playing unsuitable

CDs.

DOT display

•

Press the corresponding key to select

a CD.

“CD 2 T 2” – CD number and track

number

The DOT display will indicate the elapsed

playback time.

You can also use << / >> on the rocker

switch to select CDs.

Switching on CD changer

operation

“VIVALDI” – CD name

“14:34”

Make sure that at least one CD has been

inserted into the magazine.

– Clock

The DOT display indicates the CD track

number.

•

Press CDC, the CDC functions will ap-

pear in the display, e.g. CD and track

number, name/playback time.

The CD name will not be displayed unless

a name has already been entered.

Please refer to the section on “Entering CD

names”.

CD changer operation

Storing tracks with TPM

Selecting tracks

- RPT Trck = Repeat track

- RPT CD = Repeat CD

A track can only be stored while it is play-

ing, TPM must be switched off.

Press CDC to switch the menu levels.

You can use the rocker switch to conven-

iently select tracks or passages.

- RPT off = Repeat function off

•

Press RPT as many times as neces-

sary until you have selected the de-

sired setting.

To store a track

•

press TPM for approx. 1 second, “TPM

Prog” will appear in the display.

The CD or the track will repeat until you

press RPT to switch off the function with

“RPT off”.

This track has been stored.

Deleting the TPM

Track selection

Up: Press briefly.

CUE - fast advance (audible): Hold

pressed down.

Down: Press twice or as many times

as required.

To re-start a title: Press briefly.

REVIEW - fast reverse (audible):

Hold pressed down.

You can delete the tracks stored with TPM.

TPM tracks can be deleted with CLR only

when they are playing.

TPM

(Track Program Memory)

Use this feature to program and play your

favourite CD tracks.

It is possible to enter 99 discs with a maxi-

mum of 40 tracks each (depending on the

CD changer connected).

•

Switch on TPM.

If you would like to delete the track playing

•

press CLR for approx. 2 sec., “TR clr”

will flash briefly in the top line of the

display.

If you would like to delete all of the tracks

on the CD playing

Switching TPM playback on/off

The rocker switch acts as a sequence switch

so that you can skip over several CDs or

tracks if you press it repeatedly.

•

Press TPM briefly. The mode selected

will appear briefly in the display (“TPM

on/off”).

•

press CLR for approx. 5 sec., “CD clr”

will flash briefly in the top line of the

display.

Repeating tracks/CDs

The red arrow will light up when TPM is ac-

tive. All of the CD tracks stored with TPM

will be played back.

TPM playback cannot be activated unless

you have already stored tracks with the TPM

function.

You can also delete all of the TPM tracks

stored.

If necessary, refer to the section on “Delet-

ing CD names/TPM at the same time”.

You can repeat a track or a CD as often as

desired. Press CDC to switch the menu lev-

els.

Use the RPT key to select the following func-

tions:

CD changer operation

MIX

SCAN

The capital letters A to Z, the numbers 0 to

9 and special characters are listed one af-

ter the other.

You can have the CD tracks played in ran- Use this function to scan all of the CD tracks.

dom order.

Press CDC to switch the menu levels.

The MIX function is active when the red ar-

row lights up in the display.

You can choose the following MIX functions:

Press CDC to switch the menu levels.

•

Use the rocker switch << >> to move

to the next position and select a char-

acter.

To start the Scan function:

•

Press SCAN briefly.

The red arrow will flash to indicate that the You can select up to 7 characters in this way.

function is active.

The tracks will be scanned one after the oth-

er in ascending order.

Once you have completed the name as de-

sired:

Mix CD

The tracks on the selected CD will be played

in random order. The next CD will be se-

lected in numerical order. MIX (random or-

der) applies to the playback of the tracks.

•

Press ENT in order to store it.

To stop the Scan function:

Press SCAN once again briefly.

If you would like to name another CD,

•

press << />> to select the next CD you

The track currently scanned will continue to

play.

SCAN will also stop if you press the rocker

switch, MIX, RPT, DSC or AUD.

want to name.

Mix MAG

CDC A 08: All tracks on the CDs in the mag-

azine will be played in random order.

You can change any existing name by en-

tering and storing a new one (overwriting).

CDC A 06/071/072: The CDs in the maga-

zine are selected at random and then the

tracks on the CD selected are played in ran-

dom order.

Deleting CD names/TPM at the

same time

Entering CD names

You can enter names for up to 99 discs in

changer operation.

Use the DSC menu to delete the CD names

and the TPM at the same time.

Mix off

The Mix function is deactivated. CDs will be

played in numerical order.

The specified name (e.g. VIVALDI) will ap- Use “CD” to delete the name and TPM

pear in the display if you have selected the stored for the selected CD.

corresponding display mode with DIS.

Press CDC to switch the menu levels.

To start the entry:

Use ”PREV” to select the previous CD and

”NEXT” to select the next CD.

Use “ALL” to delete the names and TPM for

all of the CDs.

To alter MIX setting:

•

Press MIX briefly, the function selected

will appear briefly in the display.

•

Press NAME, the first of seven entry

To begin the deletion process:

positions will begin to flash.

•

Press DSC.

•

Use the rocker switch

the first character.

to select

Press CDC.

Clock - Time

CD changer operation

To delete the name of one CD

Clock display when the audio system is

switched off

This car audio system is equipped with a

built-in clock which automatically takes ad-

vantage of RDS to ensure highly accurate

time-keeping (hours, minutes).

•

press CD for approx. 1 sec.

“CD clr” will appear briefly in the top

line of the display.

You can have the clock displayed when the

ignition is switched on, but the audio sys-

tem is switched off. Make the correspond-

ing setting in the DSC menu.

If necessary, refer to the section on “DSC

programming - CLK, VIEW”.

For the clock to function properly with RDS,

an RDS station with the CT function (CT -

clock time) must be received.

To delete the names for all of the CDs

•

press ALL for approx. 4 sec.

“Memo clr” will appear briefly in the top

line of the display.

If this signal is not available, the audio sys-

tem will attempt to receive the DCF-77 time

signal (atomic clock) to correct the time the

next time it is switched off. The display will

indicate “CLK Sync” while it is synchronis-

ing the time.

Setting the clock

To return to the DSC menu:

Press EXIT.

•

a) automatically

Press EXIT or DSC to quit the DSC menu.

The clock is set automatically when the

radio is tuned into an RDS station

which has the “CT” function (clock

time).

The automatic time correction feature can

be switched off.

Displaying the clock

b) manually with DSC-CLK

You can set the clock to permanent display

in any of the operating modes (radio, tape

deck, CD changer).

It is not necessary to adjust the clock

manually unless it is not possible to re-

ceive an RDS radio station with CT

(Clocktime).

To do so

•

Press TU, CC or CDC to select the

operating mode.

If you would like to set the clock manu-

ally, refer to the section on “DSC pro-

gramming - CLK, SET”.

•

Press DIS repeatedly until the time ap-

pears in the top line of the display.

The clock will now appear in the display as

the main element.

Clock - Time

DSA – Digital Sound Adjustment

Selecting a 12 or 24-hour mode

Activating the equalizer settings

Use DSA to activate and adjust the equaliz-

er functions and to perform DNC (dynamic

noise covering). This allows you to adjust

the sound of your car hi-fi system ideally to

the listening conditions in the interior of your

car.

You can choose whether the time is dis-

played in a 12 or 24-hour mode.

If necessary, refer to the section on “DSC

programming - CLK, MODE”.

You can activate the equalizer settings in

the DSA menu.

Synchronisation

An overview of the equalizer

functions

To improve the accuracy of the internal

clock, it can be synchronised on a regular

basis. This is only possible when the time is

received via an RDS-CT signal and the au-

tomatic synchronisation feature is switched

on (default setting).

In-car hi-fi sound is affected by such things

as the car interior (cushioning, windows),

position of the speakers, etc.

•

Press DSA and EQ one after the other.

You can use the integrated equalizer to store

three different equalizer settings each for the

right and left channel (EQ1 - EQ3).

If the RDS-CT signal is not available, the

audio system will attempt to receive the

DCF-77 time signal (atomic clock) to cor-

rect the time the next time it is switched off.

Seven frequency bands can be adjusted per

channel.

These settings can be made automatically

using the hi-fi self-adjustment feature or

manually.

The display will indicate “CLK Sync” while it

is synchronising the time.

If you would like to switch off the synchroni-

sation feature, refer to “DSC programming -

CLK, SYNC”.

The setting selected last will appear in the

top line of the display.

“EQ1”, “EQ2”, “EQ3” or

“ROCK”, “POP”, “JAZZ”, “CLASSIC”,

“VOCAL”.

The automatic settings can also be adjust-

ed manually.

In addition, there are five pre-set equalizer

settings which cannot be altered.

The DOT display will indicate the frequency

band settings for the left or right channel for

this equalizer setting.

The “EQ1 - EQ3” settings can be selected

automatically with the hi-fi self-adjustment

feature and/or set manually. If necessary,

DSA – Digital Sound Adjustment

refer to the section on “Self-adjusting equal- EQ 3 for passengers in the front and

izer” or “Manual equalizer adjustment”.

back

To take the reading hold the microphone in

the corresponding position.

The settings for “Rock to Vocal” are fixed

values which cannot be adjusted.

For EQ1 (driver alone), hold the microphone

directly where the driver’s head would be.

For EQ2 (driver and front-seat passenger),

hold the microphone between the driver and

front passenger seat and for EQ3, hold the

microphone directly in the centre of the ve-

hicle (left/right, front/rear).

These readings must be taken in a quiet

area. Outside noise will distort the results.

Make sure that nothing impedes the sound

being emitted from the speakers. The mi-

crophone must be connected to the car ster-

eo system.

•

Press

ting.

to select the desired set-

•

Press

to select the setting you

Switching the equalizer on/off

want to alter (EQ1, EQ2, EQ3).

•

To switch the equalizer off, press <<.

To start the self-adjustment

“EQ off” will appear in the top line of the dis-

play.

•

To switch the equalizer on, press >>.

Self-adjusting equalizer

(Hi-fi self-adjustment)

This car stereo is equipped with a self-ad-

justing, adaptive 7-band equalizer for two

channels.

Starting the hi-fi self-adjustment

•

press ADJ and AUTO one after the

other.

The car stereo system must be switched on.

•

Place the microphone as required for

the setting you want to store.

The left and the right channel can be ad-

justed electronically for each equalizer set-

ting.

“MicPos5” will appear in the top line of the

display, the countdown will begin.

Following the countdown, the fully automat-

ic self-adjustment will begin.

The reading will not be correct if the micro-

phone is held in the wrong position.

Hi-fi self-adjustment

Noise which gradually increases in volume

will be emitted from the speakers; the top

line of the display will flash at the same time.

Make sure that your surroundings are as

quiet as possible while the reading is being

taken.

To start the hi-fi self-adjustment, activate the

DSA menu.

You can take electronic readings and store

them for three different situations, e.g.:

•

Press DSA and EQ one after the other.

EQ 1 for the driver alone

The setting selected last will appear in the

top line of the display.

EQ 2 for the driver and a front-seat pas-

senger

DSA – Digital Sound Adjustment

As soon as the self-adjustment has been You can set seven frequency bands from Now you can alter the next setting.

completed, the setting which has been ad- 64 Hz to 15600 Hz separately for the left and

justed will appear in the top line of the dis- right channel.

To quit the menu

•

press EXIT.

play. A graph indicating the values set will

appear in the DOT display.

Altering the setting manually

Activating an equalizer setting

If desired, proceed to take readings for the

remaining adjustable settings.

If necessary, you can alter the self-adjust-

ed settings to suit your own individual tastes.

Refer to the section on “Manual equalizer

adjustment”.

•

When the equalizer is switched on,

press DSA and ADJ one after the oth-

er.

If you would like to select a different equal-

izer setting, e.g. “CLASSIC” instead of

“JAZZ”,

The setting selected last will appear in the

top line of the display.

•

press DSA and EQ one after the other.

The setting selected last will appear in the

top line of the display.

•

Press

to select the setting you

want to alter (EQ1, EQ2, EQ3).

Note:

•

Press

to select:

All of the car speakers should be connect-

ed correctly when you take the readings.

If the speakers or the microphone are not

connected to the system properly when you

attempt to take the readings, the self-adjust-

ment process will be interrupted and ”Error”

will appear briefly in the top line of the dis-

play.

“EQ1”, “EQ2”, “EQ3” or

“ROCK”, “POP”, “JAZZ”, “CLASSIC”,

“VOCAL”.

•

and press ENT.

Press EXIT to quit the DSA menu.

•

Press LEFT or RGHT to alter the fre-

quencies for the corresponding chan-

nel.

The previous setting will not be altered.

Manual equalizer adjustment

•

Press << >> to select a frequency

band.

If you prefer to adjust the equalizer manual-

ly, you can enter the settings for EQ1 to EQ3

manually.

However, you can also adjust the settings

made electronically to suit your own individ-

ual tastes.

Press

to select the intensity.

Set all of the frequency bands one after the

other for the left and right channels.

After you have completed your setting

•

press ENT.

DNC – Dynamic Noise Covering

To start taking the reading:

To alter the sensitivity

DNC is used when the vehicle is in motion

to boost the car audio system’s volume to a

level which is considered pleasant in the

stationary vehicle.

•

Press DSA.

•

press DNC briefly, the value selected

will appear in the top line of the dis-

play.

The volume is boosted at different levels for

the different frequency ranges, depending

on the amount of noise which develops in

the vehicle.

Press

to alter the value as desired.

Press ENT to store this new setting and

press EXIT to quit the DSA menu.

This keeps the volume and the sound of the

audio equipment at acceptable levels while

the background noise changes. Short-term

noise, such as the noise made when you

drive over a set of railway tracks, will not

affect the volume.

Switching DNC on/off

•

Press DNC for approx. 1 sec. until

“DNC Adj” appears in the top line of

the display.

•

To switch DNC off, press <<.

”DNC off” will appear in the top line of the

display.

The DNC reading will now begin and be

completed fully automatically.

•

To switch DNC on, press >>.

As soon as “DNC 3” appears in the top line

of the display, the reading has been com-

pleted. The value will be set to average DNC

sensitivity automatically.

Adjusting DNC

Safety information

If DNC is to operate correctly for your vehi-

cle, it is necessary to take a reading with

the microphone. Take the DNC reading af-

ter you take the hi-fi self-adjustment read-

ings. Use the enclosed tape to secure the

microphone somewhere near the dash-

board, but not in the foot area, near any-

thing that reverberates or near the heating/

cooling fans.

The microphone head must be facing to-

wards the passengers. The reading should

be taken in a quiet area with the engine

switched off.

If the microphone is placed in the wrong

position, the DNC reading will be incorrect.

Adjusting DNC sensitivity

As a result, the volume might be boosted

too much while you are driving (could star-

tle the driver).

Please make sure to position the micro-

phone correctly.

The volume boost can be set to five differ-

ent levels:

Select DNC 1 if you have a loud engine and

usually listen to music with a lot of bass,

select DNC 5 if your vehicle runs very qui-

etly and you usually select classical music.

After you have taken a reading, the value

will automatically be set to DNC 3.

DSC programming

If you wish to alter any of the programming, TUN (Tuner)

This car audio system has been equipped

with DSC (Direct Software Control) to allow

you to customise certain programmable,

basic settings to suit your personal needs

and preferences and then store them.

•

press DSC and select the area, e.g.

TUN.

Use this menu to make any adjustments to

radio operation.

NAME

The basic settings for this audio equipment

were made at the factory.

Enter your own four-digit names for stored

FM stations.

In the following you can find an overview of

these settings, so that you can always reset

to them if desired.

•

Select the function you want to adjust

and press the corresponding key.

The DSC menu is divided into different

areas.

Use the rocker switch to select and adjust

the functions described in the following.

The display will show you the setting you

have selected.

DEF - Resets function to the default set-

ting (text/frequency)

PREV - Select the entry for a previous sta-

tion preset

TUN – Tuner

CLR - Delete entry

Settings for radio operation

NEXT - Select the entry for the next station

preset

DISP– Display

Press ENT (Enter) to confirm your entry.

Return to the previous menu to make any

further changes in the DSC menu.

VAR – Various

Use the rocker switch to select the entry

position and the character. Following your

entry, move to the next position or press

ENT to complete your entry.

The altered name will now appear in the dis-

play in front of the corresponding station key.

Diverse Einstellungen

KC – KeyCard

Press DSC to quit the DSC menu.

CLK – Clock (time)

DSC programming

PTY

HCUT

Fade off - The display remains on perma-

nently when the audio system is

switched on.

Use to select the language used to indicate Interference-related cut in the treble sound.

the program type: Deutsch, English or Cuts the treble when interference occurs.

Français.

Can be adjusted from NO HICUT (off) to

HICUT 3 (highest setting). Switch off Hicut

Use << >> to adjust this setting.

SHARX

with <<, adjust the values with

. Which

VAR (Various)

Switches the bandwidth in the FM frequen- setting is the most pleasant is a matter of

cy range.

personal preference.

Use this menu to make a number of differ-

ent settings.

When there are a large number of stations

within your current reception range, use <<

>> to switch to Sharx on which will prevent

most interference from adjacent radio sta-

tions.

DISP (Display)

TVOL

Use this menu to make the display settings.

Use

to adjust the traffic announcement

and warning beep volume from between 0

to 66.

The traffic message will then come through

at this volume, if the standard volume is low-

er.

If the standard volume is set higher than the

TVOL level, then the traffic report will be

played at the standard volume.

ANGL (angle)

This function has been set to “Sharx on” at

the factory.

Use

to adjust the display to your indi-

vidual viewing angle.

S-DX

DIM

To adjust the seek tuning sensitivity.

“dx” stands for distant reception.

Select “dx3” if you want to receive strong

stations which are further away, select “dx1”

if you also want to tune into weaker stations

which are further away.

Use

to adjust the display brightness

for day and << >> for night.

FADE

BEEP

Switches display off automatically.

Acknowledgement tone for all functions

which require a button to be pressed for

more than one second.

Fader 1 - 15 sec. after the last adjustment

is made the display will switch

off completely.

Fader 2 - The top line remains illuminated,

everything else switches off af-

ter 15 sec.

S-LO

To adjust the seek tuning sensitivity.

“lo” stands for local reception.

Select “lo3” if you want to receive strong sta-

tions in the local area, select “lo1” if you want

to tune into weaker stations in the local area.

Use

to set the volume between 1 and

9. Switch off Beep with << .

Use

to adjust the setting.

DSC programming

DLAY (Delay)

KC (KeyCard)

LED (Light Emitting Diode)

If an amplifier has been connected to the

system, this setting can prevent the annoy-

ing power-on pop noise. Use the delay func-

tion to switch on the amplifier with a slight

delay.

When the audio system is switched off and

the KeyCard has been removed, you can

have the ON knob and an LED in the cas-

sette slot flash as additional theft protection.

The flashing light is not visible unless the

operating panel is open.

Use this menu to make adjustments to the

KeyCard settings.

“Delay 1” = 250 ms to “Delay 9” = 2.25 sec.

delayed power-on.

LED off << >> LED on.

Refer to the information in the section on

“KeyCard theft protection system” - “Flash-

ing light as theft protection”.

VOL (Volume)

Select the power-on volume.

Use

to adjust the desired volume lev-

READ

el. If you use << to select “Last VOL”, the

system will come on at the volume selected

before it was switched off.

TOM

To read out the KeyCard data.

The card supplied with the radio is used to

display the model name, type number (7 6..)

and the serial number.

With the extra card it is possible to display

data entered by your specialised dealer.

(See the section on “Short Additional Mem-

ory S.A.M.”).

If you have a second KeyCard with a Turn-

On Message, you can switch off this infor-

mation with “TOM off”. The default setting

is “TOM on”.

SCAN (SCANTIME)

Set the scan time for the Scan and Preset

Scan functions from 5 to 30 seconds. This

setting is valid for radio, cassette or CD scan.

TOM off << >> TOM on.

For more information refer to “ KeyCard theft

protection system” - “Turn on Message

(T.O.M.)”.

If you remove the KeyCard during the read-

ing process, “Insert” will appear on the dis-

play panel.

HP-F (High pass function)

The proportion of low frequencies can be

reduced. It is advisable to take advantage

of this function when you have connected a

subwoofer.

LRN (Learn)

To “train” a second KeyCard.

Please read the information in the section

on “KeyCard theft protection system” -

“Training a second KeyCard”.

Use

to select filters 1-5.

Use << to switch the high pass function off.

DSC programming

CLK (Clock)

SYNC

The time is synchronised automatically with couple of minutes. If the DCF-77 signal is

the RDS-CT signal. not available, the system will switch off af-

completed, the system will switch off after a

Use this menu to adjust the clock settings.

This synchronisation function can be ter a few seconds.

switched off when you want to display a dif-

ferent time or when the RDS-CT and DCF-

AutoSync

The clock is synchronised with the RDS-CT

77 time signals (atomic clock) are not strong

enough.

signal or the DCF-77 signal. The system will

not attempt to receive the DCF-77 signal

unless the time cannot be synchronised with

the RDS-CT signal.

Use the rocker switch

of synchronisation:

to select the type

- RDS Sync

- DCF Sync

- AutoSync

- Sync off

SET

Sync off

The time is set automatically when the au-

dio system is tuned into an RDS station with

the “CT” (clocktime) function.

If this signal is not available, it is possible to

adjust the clock with “SET”.

The internal clock will not be synchronised.

MODE

Select the clock display.

(12h mode << />> 24h mode).

If you select the 12h mode, a.m. will appear

to indicate the morning hours and p.m. for

the afternoon/evening.

Use << on the rocker switch to switch syn-

chronisation off (“Sync off”). Use >> to re-

turn to the previous mode.

RDS Sync

The clock is synchronised with the RDS-CT

signal only.

VIEW (Displaying the time)

There are a number of different display

modes, depending on how the audio sys-

tem has been connected.

DCF Sync

The time will flash in the top line of the dis-

play in 12 (a.m./p.m.) or 24-hour mode.

Use << />> to select the value you want to

The clock is synchronised with the DCF-77

signal only. When you switch off the audio

system (by pressing ON for approx. 1 sec.),

the system will not switch off immediately in

order to synchronise the time first. While this

process is taking place, you will hear “Big

Ben”. After the synchronisation has been

a) the audio system can be switched off

with the ignition.

adjust (hours/minutes), use

the value.

to adjust

The system is switched off with “ON” when

the ignition is switched on.

DSC programming

The time will be displayed if you have ad- To quit the DSC programming mode and Display

justed the corresponding setting to “CLK on”. store the adjustment:

ANGLE

DIM

The display will switch off when the ignition

is switched off.

•

Press DSC.

Day 9

Night 7

off

FADE

Overview of the DSC default

settings

b) the audio system can only be switched

off with “ON”, not with the ignition.

Various

INSTALL menu

The system is switched off.

TVOL

BEEP

DLAY

VOL

IGN

AMP

AUX

off

The time will be displayed if you have ad-

justed the corresponding setting to “CLK on”.

SCAN (Time)

HP-F

10 sec.

off

To prevent the battery from running

down, this display will switch off af-

ter 3 hours.

TU(ner) menu

off

KeyCard

LED

TOM

REG

LOC

PTY

MONO

CDC (changer)

Will not appear unless a CD changer has

been connected and the DSC menu is ac-

tivated in the changer mode.

Clock

SET

0:00

AutoSync

24h

SYNC

MODE

VIEW

This function is used to delete names and

the TPM.

DSC menu

CLK off

– Deletes the name and TPM of the

selected CD

ALL – Deletes the names and TPM of all

the CDs

PREV – Selects the previous CD

NEXT – Selects the next CD.

Tuner

AUD menu

PTY (language)

SHARX

HICUT

Deutsch

DSA

DNC

LOUDNESS

SUBOUT

off

For more information refer to “Deleting CD

names/TPM at the same time”.

Specifications

Glossary - Technical Terminology

AF – Alternative Frequency

Dolby B NR

Amplifier

In RDS this function ensures that the radio The noise reduction system manufactured

always tunes into the frequency with the best under licence from the Dolby Laboratories

Output power:

4 x 25 W RMS power

acc. to DIN 45324 at

14.4 V

reception for the station.

Licensing Corporation.

The word DOLBY and the double-D symbol

4 x 40 W max. power

AUD – Audio

(

) are trademarks of the DOLBY Labora-

tories.

Sound settings for bass and treble, balance

(left/right) and fader (front/rear).

Tuner

Cassettes which have been recorded with

Dolby B NR exhibit significantly less tape

noise as well as much greater sound dynam-

ics.

Wavebands

87.5 – 108 MHz

531 – 1602 kHz

153 – 279 kHz

Autoreverse

See Reverse.

DNC – Dynamic Noise Covering

BLS – Blank Skip

FM sensitivity:

0.7 µV at 26 dB

signal-to-noise ratio.

Automatically boosts the volume of the car

audio system to cover the driving noise.

Automatically skips longer portions of blank

tape during cassette operation, e.g. at the

end of the tape.

FM frequency response:

20 - 16 000 Hz

DSA – Digital Sound Adjustment

The sound is adjusted digitally by a self-ad-

justing equalizer.

CL – Clear (delete)

Returns to the previous menu item.

Tape deck

DSC – Direct Software Control

Frequency response:

CPS – Cassette Program Search

30 - 20 000 Hz

With the help of DSC it is possible to adjust

the basic default settings to your own per-

sonal preferences.

Repeats and skips cassette titles.

Use S-CPS to select specific cassette titles.

ENT(Enter)

Press briefly to accept/store settings.

Subject to modifications!

Glossary - Technical Terminology

EON – Enhanced other network

Preset Scan

Reverse

In RDS, EON makes it possible to exchange

station information within a station network.

Traffic information, for example, can be for-

warded automatically from a traffic informa-

tion station to a station which does not

broadcast traffic information in the same

network. After the traffic announcement has

been put through, the radio switches back

to the original station.

See SCAN.

Switches the tape running direction during

cassette playback.

Autoreverse automatically switches to the

other side at the end of the tape.

PTY

Designed for the selection of a specific type

of program in FM (e.g. sports, news).

Also see RDS.

RM – Radio Monitor

Automatically switches to radio playback

while the tape is fast forwarding or rewind-

ing.

RDS – Radio Data System

Service provided by radio stations to en-

hance radio listening pleasure.

The station name, for example, is displayed

instead of the frequency.

Equalizer

RPT (Repeat)

Adjusts the frequencies to the acoustic con-

ditions and personal tastes.

Repeats cassette titles. In CD changer op-

eration you can repeat single CD tracks or

complete CDs.

Other RDS functions include:

EXIT

AF – Alternative Frequency

EON – Enhanced other network

Radio text

REG – Regional program

PTY – Program type

Press to end/cancel a setting.

SCAN

Briefly plays the radio stations in your cur-

rent reception range or the tracks on a CD

in CD changer mode. Using Preset Scan you

can scan the radio stations stored on the

preset buttons.

KeyCard

Theft protection system from Blaupunkt. The

car stereo cannot be operated without the

correct KeyCard.

TA – Traffic Announcement

TP – Traffic Program

SIM cards (telephone cards) or a second

KeyCard can only be trained using the orig-

inal KeyCard.

REG

S-CPS – Super Cassette Program Search

Regional programs have priority.

See CPS.

REG ON stops the radio from automatically

switching to a different regional program

broadcast by the same station because it

has better reception. Also see RDS.

MIX

Softkey (Software key)

CDs/CD tracks are played in random order.

Key with varying functions

Glossary - Technical Terminology

TA – Traffic Announcement (priority for traf-

fic information)

“TA” in the display indicates that the priority

for traffic announcements has been

switched on. Also see RDS.

TP – Traffic Program

“TP” in the display indicates that the radio is

tuned into a station which broadcasts traffic

information. Also see RDS.

TPM – Track Program Memory

Stores and plays your favourite tracks in CD

changer mode.

TS – Travelstore

Automatically stores the stations with the

best reception on the station preset buttons.

Very useful during trips.

Index

KeyCard 61, 64, 65, 66

S-CPS 79

Accessories 63

Seek tuning 72

SHARX 74

Short Additional Memory (S.A.M.) 65

Softkeys 54

Alternative frequency 70

Menu level 54, 55

Mono 74

Blank Skip (BLS) 80

Specifications 94

Station tuning 71

Stereo 74

Storing stations 72

Synchronisation 85, 92

Operating mode 69

Operating panel 53

Owner Identification 67

CD changer operation 81, 82, 83

Clock 84, 85

CPS 79

Tape operation 78, 79, 80

Telephone information 63

Telephone mute 63

Theft protection 61, 64, 65, 66

Time 84, 85

Preset Scan 73

Program type 75

PTY 74

Display 54, 60

DNC 88

Dolby B NR 78

DSA 85, 86, 87

DSC default settings 93

DSC programming 89, 90, 91, 92, 93

TPM 82

Radio Monitor (RM) 80

Radio operation with

RDS 70, 71, 72, 73, 74, 75, 76

Radio pass data 65

Radio Scan 74

Traffic information station reception 77

Traffic safety 63

Travelstore 55, 73

Turn On Message (T.O.M.) 65

First-time installation 67, 68

Radio text 56, 76

RDS-EON 77

Recalling stations 73

Regional program 71

Remote control 62

Reverse 79

Glossary 94, 95

Guarantee 63

Volume 54, 78

Warning beep 77

Waveband 71

Install menu 67

Installation 63

International telephone information 63

Service-Nummern

Tel.:

Fax:

Deutschland

Belgique

France

Nederland

Great Britain

Danmark

Sverige

018 050 002 25

025 255 444

014 010 70 07

023 565 63 48

018 958 383 66

044 898 360

051 214 940 02

025 255 448

014 010 73 20

023 565 63 31

018 958 383 94

044 898 644

087 501 500

087 501 810

Suomi

Österreich

Greece

094 359 91

045 989 90 28

015 762 241

094 359 92 36

016 103 93 91

015 769 473

âeská republika

USA

Singapore

Slovensko

026 130 04 41

180 026 6-BLAU

006 535 054 47

042 175 873 212

026 130 05 14

180 026 625 28

006 535 053 12

042 175 873 229

Blaupunkt-Werke GmbH

Bosch Gruppe

03/99 Pf

K7/VKD 8 622 401 874

Alpine PDX M6 User Manual
Audiovox Dvd3100 User Manual
Black Decker BL2010WGUC User Manual
GE FCM9 User Manual
Hamilton Beach 909 User Manual
Hobie 30115 User Manual
HP (Hewlett Packard) R740 User Manual
Huey Chiao HCS32 User Manual
JVC Car Speaker KD DV7405 User Manual
JVC Car Stereo System KDC BT92SD User Manual