Behringer iNuke NU1000 User Manual

PA Amplifiers  
iNUKE NU6000DSP  
NU3000DSP/NU1000DSP  
NU6000/NU3000/NU1000  
iNUKE NU6000DSP—  
Ultra-Lightweight, High-Density  
6000-Watt Power Amplifier with  
DSP Control and USB Interface  
Delivers 2 x 3000 Watts into 4 Ohms,  
iNUKE Series power amplifiers  
When this amazing amplifier  
2 x 1500 Watts into 8 Ohms and  
weighs less than 12 lbs / 5.5 kg  
pack massive amounts of  
technology is combined with our  
state-of-the-art switching-mode power  
supplies, these amplifiers provide  
tremendous punch. And because they are  
so much more efficient than conventional  
designs, they run cooler and don’t require  
the massive heat sinks and heavy toroid  
transformers typically associated with  
their conventional counterparts.  
output power into exceptionally  
lightweight, rack-mountable packages.  
Our revolutionary high-density Class-D  
technology combined with ultra-efficient  
switch-mode power supplies ensures  
these feather-light powerhouses will  
drive your rig effortlessly for many  
years to come.  
iNUKE NU3000DSP—  
Ultra-Lightweight, High-Density  
3000-Watt Power Amplifier with  
DSP Control and USB Interface  
Delivers 2 x 1500 Watts into 2 Ohms;  
2 x 880 Watts into 4 Ohms;  
3000 Watts into 4 Ohms  
(bridge mode) and weighs less  
than 8 lbs / 3.5 kg  
Superb transient response  
Sublimely simple operation  
We spent years fine-tuning the  
high-density Class-D technology that  
gives the iNUKE Series its oomph.  
By carefully selecting transistors with  
extremely high slew rates and optimizing  
other proprietary parts of our circuitry,  
these amps react instantly to even the  
The front panel controls and indicators  
provide your system’s vital signs at a  
glance. After pressing the Power button,  
the Power LED lights to show the amp  
is ready for action. All channels feature  
positive-detent Gain controls with Signal  
LEDs that light when a signal is present,  
iNUKE NU1000DSP —  
Ultra-Lightweight, High-Density  
1000-Watt Power Amplifier with DSP  
Control and USB Interface  
Delivers 2 x 500 Watts into 2 Ohms;  
2 x 300 Watts into 4 Ohms;  
1000 Watts into 4 Ohms  
(bridge mode) and weighs less  
than 8 lbs / 3.5 kg  
most demanding electronicbass impulses. as well as clip LEDs to indicate when the  
signal is distorted and you need to reduce  
the input signal.  
Continued on next page  
Common features  
Ultimate reliability through  
revolutionary cool-running  
High-Density Class-D technology  
with “near-zerothermal buildup  
Ultra-efficient switch-mode power  
supply for noise-free audio,  
superior transient response and  
low power consumption  
High-performance DSP and  
24-bit/96 kHz converters deliver  
ultimate signal integrity and  
extreme dynamic range  
DSP section features sophisticated  
delay, crossover (3 filter types, up to  
48 dB/octave), EQ (8 parametric,  
2 dynamic), dynamics processing  
and lockable security settings  
Page 3 of 11  
Value  
Sporting massive output ratings,  
lightweight Class-D technology,  
an equally lightweight price tag, and  
all the amenities a professional audio  
iNUKE NU6000DSP  
NU3000DSP  
NU1000DSP  
NU6000  
engineer could ask for, BEHRINGER iNUKE  
amplifiers are serious amps for the most  
demanding applications.  
NU3000  
iNUKE NU6000DSP/NU3000DSP/NU1000DSP  
Front Panel  
NU1000  
DSP LCD panel with  
parameter controls  
allows setup without  
need for computer  
iNUKE NU6000—  
Ultra-Lightweight, High-Density  
6000-Watt Power Amplifier  
USB socket for laptop  
control and setup  
Power button  
Delivers 2 x 3000 Watts into 4 Ohms,  
2 x 1500 Watts into 8 Ohms and  
weighs less than 12 lbs / 5.5 kg  
iNUKE NU3000—  
Ultra-Lightweight, High-Density  
3000-Watt Power Amplifier  
Delivers 2 x 1500 Watts into 2 Ohms;  
2 x 880 Watts into 4 Ohms;  
3000 Watts into 4 Ohms  
GAIN CONTROLS  
adjust input level  
(bridge mode) and weighs less than  
7 lbs / 3.3 kg  
Rear Panel  
iNUKE NU1000—  
Ultra-Lightweight, High-Density  
1000-Watt Power Amplifier  
Delivers 2 x 500 Watts into 2 Ohms;  
2 x 300 Watts into 4 Ohms;  
1000 Watts into 4 Ohms  
(bridge mode) and weighs less than  
7 lbs / 3.3 kg  
Power Connection  
TWIST-LOCKING  
SPEAKER OUTPUTS  
INPUTS connect  
sound source  
Common features  
accept professional  
speaker cables  
using ¼" TRS / XLR  
combo jacks  
Ultimate reliability through  
revolutionary cool-running  
High-Density Class-D technology  
with “near-zerothermal build up  
Ultra-efficient switch-mode power  
supply for noise-free audio,  
superior transient response and  
low power consumption  
“Zero-Attacklimiters offer  
maximum output level with  
reliable overload protection  
Page 4 of 11  
iNUKE NU6000DSP  
NU3000DSP  
NU1000DSP  
NU6000  
System configuration is a breeze thanks  
to iNUKE’s Amp Remote software  
(Available on iNUKE DSP models only)  
NU3000  
NU1000  
Built-in Subwoofer/Satellite  
crossover for perfect  
subwoofer operation  
Dynamic EQ combines the effects  
of equalization and side-chain  
compression to compensate  
for the perceived loudness  
of specific frequency ranges  
(Available on iNUKE DSP models only)  
Detented and illuminated gain  
controls for precise level setting  
Precise 4-segment Signal and Limit  
LEDs to monitor performance  
XLR and 1// TRS combination input  
connectors for compatibility with  
any source  
iNUKE’s DSP crossover features 3 filter  
types (at up to 48 dB/octave) for the  
ultimate in versatility  
Professional twist-lock speaker  
connectors for ultimate reliability  
Independent DC, LF and thermal  
overload protection on each channel  
automatically protects amplifier  
and speakers without shutting down  
the show  
(Available on iNUKE DSP models only)  
“Back-to-frontventilation system  
prevents thermal buildup for  
reliable operation  
8 Parametric EQ filters make it easy  
to optimize system performance  
with just a few mouse clicks  
High-quality components and  
exceptionally rugged construction  
ensure long life  
(Available on iNUKE DSP models only)  
Conceived and designed by  
BEHRINGER Germany  
Save and recall frequently-used  
setups, complete with lockout  
codes for total system security  
(Available on iNUKE DSP models only)  
Page 5 of 11  
iNUKE NU6000DSP  
NU3000DSP  
NU1000DSP  
NU6000  
NU3000  
NU1000  
iNUKE NU3000 – Live Setup with PA and Floor Monitor  
UMA25S  
ULTRACOUSTIC ACX900  
XM8500 Vocal Mics  
Tape In  
Tape Out  
Portable Multi-track  
Recorder  
Mon out  
XENYX X1222USB  
EUROLIVE F1320D  
Active Floor Monitor  
L
Main out  
R
iNUKE NU3000  
B215XL Passive Loudspeakers  
Page 6 of 11  
iNUKE NU6000DSP  
NU3000DSP  
NU1000DSP  
NU6000  
NU3000  
NU1000  
Concert Setup with Delay Line  
VP1520  
Right delay line  
iNUKE NU3000DSP  
Group 2 Out  
FOH (Front Of House)  
loudspeaker system  
Main A Out  
XENYX XL3200  
Group 1 Out  
iNUKE NU3000DSP  
Left delay line  
VP1520  
Page 7 of 11  
iNUKE NU6000DSP  
NU3000DSP  
NU1000DSP  
NU6000  
NU3000  
NU1000  
iNUKE NU1000 – Live Stereo DJ Setup with Passive PA  
iNUKE NU1000  
B-CONTROL DEEJAY  
BCD3000  
HPX2000  
B1800X PRO  
Passive Subwoofer  
VP1520  
Passive Loudspeaker  
XM8500  
Talkover Mic  
Turntables  
Page 8 of 11  
iNUKE NU6000DSP  
NU3000DSP  
NU1000DSP  
NU6000  
NU3000  
NU1000  
Specifications  
NU6000DSP  
Output Power  
NU3000DSP  
Output Power  
Connectors  
Inputs  
2 x combo jacks  
Maximum output power  
Stereo  
Maximum output power  
Stereo  
Input impedance  
10 kΩ unbalanced,  
20 kΩ balanced  
8 Ω per channel, stereo  
4 Ω per channel, stereo  
2 Ω per channel, stereo  
Bridged mono  
8 Ω  
1500 W  
3000 W  
8 Ω per channel, stereo  
4 Ω per channel, stereo  
2 Ω per channel, stereo  
Bridged mono  
8 Ω  
440 W  
820 W  
1520 W  
Outputs  
2 x locking-style professional  
speaker connectors  
Output circuit type  
Distortion  
Class D  
<0.2%  
Frequency response  
Damping factor  
Signal-to-noise  
USB  
20 Hz to 20 kHz, +0 / -2 dB  
>140 @ 8 Ω  
>98 dB  
1500 W  
3000 W  
4 Ω  
4 Ω  
RMS  
RMS  
Stereo  
Front panel USB connector  
type B for remote  
control of DSP section  
Stereo  
8 Ω per channel, stereo  
4 Ω per channel, stereo  
2 Ω per channel, stereo  
Bridged mono  
8 Ω  
1100 W  
2200 W  
8 Ω per channel, stereo  
4 Ω per channel, stereo  
2 Ω per channel, stereo  
Bridged mono  
8 Ω  
315 W  
620 W  
1040 W  
Circuit Protection  
Cooling  
Continuously variable  
speed fan, Back-to-front  
air flow  
1250 W  
2075 W  
Amplifier protection  
Load protection  
Thermal and DC protection,  
Stable into reactive or  
mismatched loads  
4 Ω  
4 Ω  
System  
System  
On/off muting,  
DC-fault power supply  
shutdown  
Controls  
Controls  
Front  
Power switch, Gain controls  
(channels A and B) DSP section  
rotary push-encoder,  
Buttons for Process, Setup,  
Up/Down, Exit  
Front  
Power switch, Gain controls  
(channels A and B) DSP section  
rotary push-encoder,  
Buttons for Process, Setup,  
Up/Down, Exit  
Power Supply, Power Consumption @ 1/8 Rated Power,  
Voltage (Breaker / Fuses)  
USA / Canada  
120V~, 60Hz (25A)  
220-240 V~, 50/60 Hz, (12A)  
220-240 V~, 50/60 Hz,(12A)  
100 V~, 50/60 Hz, (25A)  
UK / Australia / Europe  
Korea / China  
Indicators  
Indicators  
Power  
Amber backlit illuminated  
gain controls  
Power  
Amber backlit illuminated  
gain controls  
Japan  
Limit (per channel)  
Signal (per channel)  
Digital Signal Processing (DSP)  
Display  
0 dB, full scale  
-24, -12, -6 dB  
Power consumption @ 2 ohms  
Limit (per channel)  
Signal (per channel)  
Digital Signal Processing (DSP)  
Display  
0 dB, full scale  
-24, -12, -6 dB  
Power consumption @ 4 ohms 620 W  
Mains connector  
Standard IEC receptacle  
LCD 128 x 32, amber backlit  
0 - 300 ms  
LCD 128 x 32, amber backlit  
0 - 300 ms  
Dimensions/Weight  
Digital delay function  
(per channel)  
Digital delay function  
(per channel)  
Dimensions (H x W x D)  
appr. 3.5 x 19.01 x 12.91"  
appr. 89 x 483 x 328 mm  
Digital crossover function  
3 filter types,  
up to 48 dB/octave  
Digital crossover function  
3 filter types,  
up to 48 dB/octave  
Weight  
appr. 11.4 lbs / 5.2 kg  
Digital EQ function  
(per channel)  
8-band parametric,  
2-band dynamic equalizer  
Digital EQ function  
(per channel)  
8-band parametric,  
2-band dynamic equalizer  
Digital dynamics function  
(per channel)  
Zero attack limiter (peak)  
Digital dynamics function  
(per channel)  
Zero attack limiter (peak)  
Presets  
20 total presets,  
19 user-definable  
Presets  
20 total presets,  
19 user-definable  
Page 9 of 11  
iNUKE NU6000DSP  
NU3000DSP  
NU1000DSP  
NU6000  
NU3000  
NU1000  
NU1000DSP  
Output Power  
Connectors  
Connectors  
Inputs  
Inputs  
2 x combo jacks  
10 kΩ unbalanced,  
20 kΩ balanced  
2 x combo jacks  
Maximum Output Power  
Stereo  
Input impedance  
Input impedance  
10 kΩ unbalanced,  
20 kΩ balanced  
8 Ω per channel, stereo  
4 Ω per channel, stereo  
2 Ω per channel, stereo  
Bridged mono  
8 Ω  
160 W  
320 W  
530 W  
Outputs  
2 x locking-style professional  
speaker connectors  
Outputs  
2 x locking-style professional  
speaker connectors  
Output circuit type  
Distortion  
Class D  
Output circuit type  
Distortion  
Class D  
<0.1%  
<0.3%  
570 W  
Frequency response  
Damping factor  
Signal-to-noise  
USB  
20 Hz to 20 kHz, +0 / -1 dB  
>155 @ 8 Ω  
>98 dB  
Frequency response  
Damping factor  
Signal-to-noise  
USB  
20 Hz to 20 kHz, +0 / -1 dB  
>145 @ 8 Ω  
>98 dB  
4 Ω  
1050 W  
RMS  
Stereo  
Front panel USB connector  
type B for remote  
control of DSP section  
Front panel USB connector  
type B for remote  
control of DSP section  
8 Ω per channel, stereo  
4 Ω per channel, stereo  
2 Ω per channel, stereo  
Bridged mono  
8 Ω  
110 W  
210 W  
380 W  
Circuit Protection  
Circuit Protection  
Cooling  
Continuously variable  
speed fan, Back-to-front  
air flow  
Cooling  
Continuously variable  
speed fan, Back-to-front  
air flow  
430 W  
750 W  
Amplifier protection  
Load protection  
Thermal and DC protection,  
Stable into reactive or  
mismatched loads  
Amplifier protection  
Load protection  
Thermal and DC protection,  
Stable into reactive or  
mismatched loads  
4 Ω  
System  
On/off muting,  
DC-fault power supply  
shutdown  
On/off muting,  
DC-fault power supply  
shutdown  
Controls  
Front  
Front Power switch,  
Gain controls (channels  
A and B) DSP section  
rotary push-encoder,  
Buttons for Process,  
Setup, Up/Down, Exit  
Power Supply, Power Consumption @ 1/8 Rated Power,  
Voltage (Breaker / Fuses)  
Power Supply, Power Consumption @ 1/8 Rated Power,  
Voltage (Breaker / Fuses)  
USA / Canada  
120 V~, 60 Hz (T 6.3 A H 250 V)  
USA / Canada  
120 V~, 60 Hz (T 10 A H 250 V)  
UK / Australia / Europe  
220-240 V~, 50/60 Hz  
(T 3.15 A H 250 V)  
UK / Australia / Europe  
220-240 V~, 50/60 Hz  
(T 6.3 A H 250 V)  
Indicators  
Korea / China  
Japan  
220-240 V~, 50/60 Hz  
(T 3.15 A H 250 V)  
Korea / China  
Japan  
220-240 V~, 50/60 Hz  
(T 6.3 A H 250 V)  
Power  
Amber backlit illuminated  
gain controls  
100 V~, 50/60 Hz  
(T 6.3 A H 250 V)  
100 V~, 50/60 Hz  
(T 10 A H 250 V)  
Limit (per channel)  
Signal (per channel)  
Digital Signal Processing (DSP)  
Display  
0 dB, full scale  
-24, -12, -6 dB  
Power consumption @ 2 ohms 150 W  
Power consumption @ 4 ohms 70 W  
Power consumption @ 2 ohms 350 W  
Power consumption @ 4 ohms 210 W  
LCD 128 x 32, amber backlit  
0 - 300 ms  
Mains connector  
Standard IEC receptacle  
Mains connector  
Standard IEC receptacle  
Digital delay function  
(per channel)  
Dimensions/Weight  
Dimensions/Weight  
Digital crossover function  
3 filter types,  
up to 48 dB/octave  
Dimensions (H x W x D)  
appr. 3.5 x 19 x 9.76"  
appr. 89 x 483 x 248 mm  
Dimensions (H x W x D)  
appr. 3.5 x 19 x 9.76"  
appr. 89 x 483 x 248 mm  
Digital EQ function  
(per channel)  
8-band parametric,  
2-band dynamic equalizer  
Weight  
appr. 6.8 lbs / 3.1 kg  
Weight  
appr. 6.8 lbs / 3.1 kg  
Digital dynamics function  
(per channel)  
Zero attack limiter (peak)  
Presets  
20 total presets,  
19 user-definable  
Page 10 of 11  
iNUKE NU6000DSP  
NU3000DSP  
NU1000DSP  
NU6000  
NU3000  
NU1000  
NU6000  
Output Power  
System  
Amplifier protection  
Load protection  
Thermal and DC protection  
Stable into reactive or  
mismatched loads  
Maximum Output Power  
Stereo  
Controls  
Front  
Power switch  
Gain controls (channels A and B)  
On/off muting, DC-fault power  
supply shutdown  
8 Ω per channel, stereo  
4 Ω per channel, stereo  
2 Ω per channel, stereo  
Bridged mono  
8 Ω  
1500 W  
3000 W  
Rear  
Mode switch  
(bridge/stereo/mono)  
Crossover switch  
(fullrange/100 Hz)  
Power Supply, Voltage (Breaker/Fuse)  
USA / Canada  
120V~, 60Hz (25A)  
Indicators  
UK / Australia / Europe  
Korea / China  
220-240 V~, 50/60 Hz, (12A)  
220-240 V~, 50/60 Hz,(12A)  
100 V~, 50/60 Hz, (25A)  
Power  
Amber/red backlit illuminated  
gain controls  
4 Ω  
RMS  
Japan  
Limit (per channel)  
Signal (per channel)  
Connectors  
0 dB, full scale  
-24, -12, -6 dB  
Stereo  
Power consumption @ 2 Ω  
Power consumption @ 4 Ω  
Mains connector  
8 Ω per channel, stereo  
4 Ω per channel, stereo  
2 Ω per channel, stereo  
Bridged mono  
8 Ω  
1100 W  
2200 W  
620 W  
Standard IEC receptacle  
Inputs  
2 x combo jacks  
Input impedance  
10 kΩ unbalanced,  
20 kΩ balanced  
Dimensions/Weight  
Outputs  
2 x locking-style professional  
speaker connectors  
Dimensions (H x W x D)  
appr. 3.5 x 19 x 12.91"  
appr. 89 x 483 x 328 mm  
4 Ω  
Output circuit type  
Distortion  
Class D  
Weight  
11 lbs / 5 kg  
<0.2%  
System  
NU3000  
Frequency response  
Damping factor  
Signal-to-noise  
Circuit Protection  
Cooling  
20 Hz to 20 kHz, +0 / -1 dB  
>160 @ 8 Ω  
>100 dB  
Controls  
Front  
Power switch  
Output Power  
Gain controls (channels A and B)  
Rear  
Mode switch (stereo/mono)  
Crossover switch  
(fullrange/100 Hz)  
Maximum Output Power  
Stereo  
Continuously variable speed fan  
Back-to-front air flow  
8 Ω per channel, stereo  
4 Ω per channel, stereo  
2 Ω per channel, stereo  
Bridged mono  
8 Ω  
440 W  
880 W  
1500 W  
Indicators  
Amplifier protection  
Load protection  
Thermal and DC protection  
Stable into reactive or  
mismatched loads  
Power  
Amber/red backlit illuminated  
gain controls  
Limit (per channel)  
Signal (per channel)  
Connectors  
0 dB, full scale  
-24, -12, -6 dB  
On/off muting, DC-fault power  
supply shutdown  
1500 W  
3000 W  
4 Ω  
Power Supply, Voltage (Breaker/Fuse)  
Inputs  
2 x combo jacks  
RMS  
USA / Canada  
120 V~, 60 Hz (T 10 A H 250 V)  
Input impedance  
10 kΩ unbalanced,  
20 kΩ balanced  
Stereo  
UK / Australia / Europe  
220-240 V~, 50/60 Hz  
(T 6.3 A H 250 V)  
8 Ω per channel, stereo  
4 Ω per channel, stereo  
2 Ω per channel, stereo  
Bridged mono  
8 Ω  
280 W  
550 W  
1100 W  
Outputs  
2 x locking-style professional  
speaker connectors  
Korea / China  
Japan  
220-240 V~, 50/60 Hz  
(T 6.3 A H 250 V)  
Output circuit type  
Distortion  
Class D  
100 V~, 50/60 Hz  
(T 10 A H 250 V)  
<0.2%  
1100 W  
2200 W  
Frequency response  
Damping factor  
Signal-to-noise  
Circuit Protection  
Cooling  
20 Hz to 20 kHz, +0 / -2 dB  
>140 @ 8 Ω  
>100 dB  
Power consumption @ 2 Ω  
Power consumption @ 4 Ω  
Mains connector  
350 W  
4 Ω  
170 W  
Standard IEC receptacle  
Continuously variable speed fan  
Back-to-front air flow  
Dimensions/Weight  
Dimensions (H x W x D)  
appr. 3.5 x 19 x 9.76"  
appr. 89 x 483 x 248 mm  
Weight  
6.17 lbs / 2.8 kg  
Page 11 of 11  
iNUKE NU6000DSP  
NU3000DSP  
NU1000DSP  
NU6000  
NU3000  
NU1000  
NU1000  
Output Power  
Power Supply, Voltage (Breaker/Fuse)  
Indicators  
Maximum Output Power  
Stereo  
Power  
Amber/red backlit illuminated  
gain controls  
USA / Canada  
120 V~, 60 Hz (T 6.3 A H 250 V)  
UK / Australia / Europe  
220-240 V~, 50/60 Hz  
(T 3.15 A H 250 V)  
Limit (per channel)  
Signal (per channel)  
Connectors  
0 dB, full scale  
-24, -12, -6 dB  
8 Ω per channel, stereo  
4 Ω per channel, stereo  
2 Ω per channel, stereo  
Bridged mono  
8 Ω  
150 W  
300 W  
500 W  
Korea / China  
Japan  
220-240 V~, 50/60 Hz  
(T 3.15 A H 250 V)  
100 V~, 50/60 Hz  
(T 6.3 A H 250 V)  
Inputs  
2 x combo jacks  
Input impedance  
10 kΩ unbalanced,  
20 kΩ balanced  
500 W  
Power consumption @ 2 Ω  
Power consumption @ 4 Ω  
Mains connector  
150 W  
4 Ω  
1000 W  
70 W  
Outputs  
2 x locking-style professional  
speaker connectors  
RMS  
Standard IEC receptacle  
Stereo  
Output circuit type  
Distortion  
Class D  
Dimensions/Weight  
8 Ω per channel, stereo  
4 Ω per channel, stereo  
2 Ω per channel, stereo  
Bridged mono  
8 Ω  
100 W  
200 W  
400 W  
<0.1%  
Frequency response  
Damping factor  
Signal-to-noise  
Circuit Protection  
Cooling  
20 Hz to 20 kHz, +0 / -1 dB  
>155 @ 8 Ω  
>100 dB  
Dimensions (H x W x D)  
appr. 3.5 x 19 x 9.76"  
appr. 89 x 483 x 248 mm  
Weight  
6.17 lbs / 2.8 kg  
400 W  
800 W  
Please note these specifications are preliminary and conceptual in nature, and as such are subject  
to change as product development progresses. This information is supplied for market research  
purposes only and is not to be made public in any manner. This document is solely the property of  
The MUSIC Group, or one of its subsidiaries, and must be surrendered upon request of the owner.  
4 Ω  
Continuously variable speed fan  
Back-to-front air flow  
Amplifier protection  
Load protection  
Thermal and DC protection  
Stable into reactive or  
mismatched loads  
System  
Controls  
Front  
Power switch  
Gain controls (channels A and B)  
On/off muting, DC-fault power  
supply shutdown  
Rear  
Mode switch  
(bridge/stereo/mono)  
Crossover switch  
(fullrange/100 Hz)  
For service, support or more information contact the BEHRINGER location nearest you:  
Europe  
USA/Canada  
Japan  
MUSIC Group Services UK  
Tel: +44 156 273 2290  
MUSIC Group Services NV Inc.  
Tel: +1 702 800 8290  
MUSIC Group Services JP K.K.  
Tel.: +81 3 6231 0454  
Technical specifications and appearances are subject to change without notice and accuracy is not guaranteed. BEHRINGER is part of the MUSIC Group (music-group.com). All trademarks are the property of their respective owners. MUSIC Group accepts no liability for any loss  
which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and specifications may vary from actual product. MUSIC Group products are sold through authorized fullfillers and resellers only.  
Fullfillers and resellers are not agents of MUSIC Group and have absolutely no authority to bind MUSIC Group by any express or implied undertaking or representation. This manual is copyrighted. No part of this manual may be reproduced or transmitted in any form or by any  
means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of MUSIC Group IP Ltd. ALL RIGHTS RESERVED. © 2012 MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town,  
Tortola, British Virgin Islands. 985-10000-00486  

Canon EF S60MM User Manual
Canon SC A70 User Manual
Canon Speedlite Flash 5296B002 User Manual
Crown Boiler 24 10 User Manual
Dynex DX S1000 User Manual
Energy Tech Laboratories New Yorker F5 User Manual
Gitzo Classic Tele Studex Mk2 G1504 User Manual
Hypertec 6501HY User Manual
iOptron Camcorder Accessories 8602 User Manual
Jensen POWERPLUS 1150 User Manual