Avenview C MDP VGA User Manual

Mini DisplayPort to VGA Converter  
Model #: C-MDP-VGA  
© 2010 Avenview Inc. All rights reserved.  
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with  
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any  
time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in  
Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products  
including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.  
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.  
Section 1: Getting Started  
1.1 Important Safeguards  
Please read all of these instructions carefully before you use the device. Save this manual for future  
reference.  
What the warranty does not cover  
Any product, on which the serial number has been defaced, modified or removed.  
Damage, deterioration or malfunction resulting from:  
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized  
product modification, or failure to follow instructions supplied with the product.  
Repair or attempted repair by anyone not authorized by us.  
Any damage of the product due to shipment.  
Removal or installation of the product.  
Causes external to the product, such as electric power fluctuation or failure.  
Use of supplies or parts not meeting our specifications.  
Normal wear and tear.  
Any other causes which does not relate to a product defect.  
Removal, installation, and set-up service charges.  
1.2 Safety Instructions  
The Avenview C-MDP-VGA, Mini DisplayPort to VGA Converter has been tested for conformance to safety  
regulations and requirements, and has been certified for international use. However, like all electronic  
equipment’s, the C-MDP-VGA should be used with care. Read the following safety instructions to protect  
yourself from possible injury and to minimize the risk of damage to the unit.  
Do not dismantle the housing or modify the module.  
Dismantling the housing or modifying the module may result in electrical shock or burn.  
Refer all servicing to qualified service personnel.  
Do not attempt to service this product yourself as opening or removing housing may expose you to  
dangerous voltage or other hazards  
Keep the module away from liquids.  
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid  
falls or spills on to the housing, unplug the module immediately.  
Have the module checked by a qualified service engineer before using it again.  
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before  
cleaning.  
3
     
1.3 Regulatory Notices Federal Communications Commission (FCC)  
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed  
to provide reasonable protection against harmful interference in a residential installation.  
Any changes or modifications made to this equipment may void the user’s authority to operate this  
equipment.  
1.4 Introduction  
Avenview C-MDP-VGA The Mini DisplayPort to VGA adapter enable you to connect any VGA interface  
embedded device (Monitor, Projector etc.) with a Mini DisplayPort interface (Desktop, Laptop) and no need to  
purchase any DisplayPort embedded terminal device.  
-
-
-
-
-
-
Plug & Play  
No extra drivers required  
Output Connector: 15 pin D-Sub  
Compatible with DisplayPort ver 1.1  
DPCD Rev 1.1 & HDCP 1.3 compliance  
Supports up to 1920x1200 resolution  
1.5 Package Contents  
Before you start the installation of the converter, please check the package contents.  
-
C-MDP-VGA  
x 1  
x 1  
-
User’s Manual  
1.6 Before Installation  
Put the product in an even and stable location. If the product falls down or drops, it may cause an  
injury or malfunction.  
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high  
humidity.  
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it  
may cause a fire.  
Do not twist or pull by force ends of the optical cable. It can cause malfunction.  
4
       
1.7 Installation  
Follow these steps to connect Avenview C-MDP-VGA converter:  
1. Connect the Mini DisplayPort connector to the PC, Laptop or any other Mini DisplayPort source  
device  
2. Connect VGA connection to Monitor, TV or Projector  
3. Turn on your Monitor/TV/Projector and then Mini DisplayPort source  
Please ensure that the display resolution set in PC is supported by the Monitor/TV.  
5
 
Section 2: Specifications  
Item  
Description  
C-MDP-VGA  
Unit  
DisplayPort to VGA Converter  
DisplayPort v 1.1a  
Unit Description  
Compliance  
Output  
Analog VGA (15 pin D-sub male)  
DPCD Rev 1.1  
HDCP 1.3  
DPCD / HDCP Compliance  
2.7 Gbps  
Video Bandwidth  
Supported Resolution and  
Distance  
Up to WUXGA (1920 x 1200)  
Digital Video Output in 18 / 24 / 30 (deep color) bits  
6-bit, 8-bit, 10-bit per color RGB  
Color  
6
 
Disclaimer  
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the  
operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of  
Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of  
anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the  
Avenview hardware, software, or other products and documentation provided herein.  
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability,  
function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties  
regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and  
non-infringement.  
7

ACP EP Memory Extreme Performance SD150X User Manual
Alpine Electronics Car Satellite Radio System XM Direct Satellite Radio Pkg Alpine User Manual
Blaupunkt HEILBRONN RCC 24 User Manual
Blaupunkt ST LOUIS C33 User Manual
Canon EF15 User Manual
Casio Financial Calculator FC200V User Manual
Farenheit Technologies T 7020CMM User Manual
Havis Shields C 3330 800 MW 800 User Manual
JAMO 50 User Manual
JVC GR SXM86ED User Manual