VOH683
For Custom er Service
Visit Our W ebsite At
WWW.audiovox.com
Product Inform ation, Photos,
FAQ’s O wner’s M anuals
®
ELECTRO N ICS CO RP.
128-6115
1 of 16
Released 11-15-01.
Features
Congratulations on your purchase of the Audiovox
VOH683 drop-down Video Monitor. The VOH683
has been designed to give you and your family many
years of video entertainment in a mobile environment.
Please read the directions that follow to familiarize
yourself with the product and to ensure that you
obtain the best results from your equipment.
Please note: Installation options vary, see the
individual owner’s manuals for each component in
your system to obtain a full understanding of each
component’s operation.
v 6.8” TFT (Thin Film Transistor) Active
Matrix LCD (Liquid Crystal Display)
Monitor (4:3 Aspect Ratio)
v OSD (On Screen Display) for Control
of Picture Quality and Functions
v Full Function Remote Control
v FM Radio
v Dual Channel Infrared Transmitters for
IR Wireless Headphones
Safety Precaution
For safety reasons, when changing video tapes it is
recommended that the vehicle is not in motion and
that you do not allow children to unfasten seat belts
to change tapes or make any adjustments to the
system. System adjustments can be accomplished
using the remote control unit, while seat belts remain
fastened. Enjoy your Audiovox entertainment
system but remember-safety of all passengers
remains the number one priority.
v Two Audio / Video Sources (inputs)
v Headphone / Speaker Amplifier
v Headphone Jacks (Monitor and Radio)
v Forward and Side Remote Sensor
v Dome Lights with Switch
v Backlit Controls for Low Light Operation
v Dual Channel Wireless Headphones
-3-
128-6115
3 of 16
1
3
2
4
5
10
6A
7
11
12
8
9
13
14
15
16
6B
-4-
128-6115
4 of 16
8. Recall Button – Used to access and display the preset
radio stations in memory.
9. MemoryButton–Usedtostorethedesiredradiostations
in memory.
10. LCD Display Window – Used to display the FM radio
station frequency.
11. Search Up/Down – Used to search for the desired FM
radio station frequency.
Front Panel
1. Dual Channel Infrared Transmitter – Used to
transmit audio to wireless headphones.
Monitor Controls
2. Power Button – (Bright red when system is On, dim
when Off)
3. VolumeUp/Down–Controlsthevideoprogramaudio
volume as heard through the headphone jack (TV
EAR) and external speakers if connected.
4. Picture Select – Selects contrast, brightness, color
andtint.
12. Three position Dome Light Switch
•
•
•
Auto – Automatically switches on the dome lights
inconjunctionwiththevehicle’sinteriorillumination.
Off – Turns off dome lights and prevents them
from lighting when the switch is in the off position.
On – Turns on the dome lights.
5. SourceSelect–UsedtoselectA/Vsources(TV, VCP,
DVD or Game).
6A. Forward Sensor Eye – Allows the remote control to
operate the VOH683’s OSD (On Screen Display),
controlvolumetowiredheadphonejacks(andoptional
external speakers), and to control the Video Cassette
Player and other accessories.
13. Dome lights – provide additional interior vehicle
illumination.
14. Screen Release – Slides in the direction of the arrow
to release the drop down screen.
6B. Side Remote Sensor Eye – Allows the remote control
to operate the VOH683’s OSD (On Screen Display),
controlvolumetowiredheadphonejacks(andoptional
external speakers) and to control the Video Cassette
Player and other accessories.
15. TV EAR Headphone Jack – Allows plug-in of wired
headphones with 1/8” stereo plug for monitoring the
video program audio.
16. RADIOEARHeadphoneJack–Allowsplug-inofwired
headphones with 1/8” stereo plug for monitoring the
radio program audio.
FM Radio Controls
7. Power Button for FM Radio – (Bright red when system
is On, dim when Off).
NOTE: Audiovox recommends the use of the
AudiovoxHP275Headphones.
-5-
128-6115
5 of 16
REMOTE CONTROL OPERATION
5
4
BATTERY INSTALLATION
TV POWER
VCP TV/AV
POD TV/AV
1
Before attempting to operate your Remote Control,
install the batteries as described below.
1) Turn the Remote Control face down. Press down
on the ridged area of the battery cover and slide it
off.
2) Install two “AAA” batteries as shown. Make sure
that proper polarity (+ or -) is observed.
3) Slide the cover back until it clicks.
1
4
7
0
2
5
3
6
9
CH
CH
8
VOL
VOL
3
PICTURE/
SELECT
2
9
1--
AUTO
MEMORY
ERASE/
WRITE
SKIP/SEARCH
RADIO POWER
MUTE
TUNING
The remote control will operate the VOH683, Audiovox
Televisions and Video Cassette Players. It is not a
universal remote control and will not control equipment
from other manufacturers.
6
7
8
12
VOLUME
10
11
14
VCP POWER RECALL
MEMORY
PLAY
STOP
REW
F. F W D REPLAY
If a universal remote control is to be used with the
VOH683, choose the remote encoding scheme for
Audiovox Televisions when programming the remote.
13
15
17
16
®
NOTE: The TV POWER channel up/down function
buttons and the direct numbers 1 through 1-
associated with the Remote Control Unit are
not operational with the VOH683.
-6-
128-6115
6 of 16
Remote Controlled Monitor
Functions
1. POWER ON/OFF
setting. The adjustment bar will automatically
turn off if no adjustments are made within 6
seconds, or if any other button is depressed.
Press this button to turn the VOH683 On. The
channel number or current video source will be
displayed on screen and the picture will appear
in a few seconds. Press the button again to turn
the VOH683 Off.
4. VCP TV/VIDEO BUTTON
Press this button to control the functions on VCP
with tuner.
5. POD TV/AV BUTTON
Any video equipment connected to the AUDIO/
VIDEO inputs can be viewed on the monitor by
pressing this button. Each time the button is
pressed, the Audio / Video source will change in
the following sequence VIDEO 1, and VIDEO 2 .
2. VOLUME UP/DOWN BUTTONS
Use these buttons to increase or decrease the
volume level of the headphone jacks or external
speaker if installed. They are also used to make
picture adjustments in picture select mode.
Note: These buttons will not affect the volume
of wireless headphones or a wired RF modulator.
When using these devices the volume must be
adjusted with the wireless headphone volume
control or with your radio’s volume control (see
page 13, Headphones and Wired FM Modulator).
3. PICTURE SELECT BUTTON
Remote Controlled Radio Functions
6. FM RADIO POWER ON/OFF
Press this button to turn the FM Radio On. The
radio station frequency will be displayed on LCD
display window. Press the button again to turn
the FM Radio Off.
Each time this button is pressed, the on screen
picture adjustment display cycles through
7. MUTE BUTTON (FOR FM RADIO)
Press this button to shut off the sound at the
headphone station for the FM radio audio only.
Pressing the button again restores sound to the
previously set level.
“adjustment
bars”
for
CONTRAST,
BRIGHTNESS, COLOR and TINT. Once the
desired adjustment bar is displayed, use the
VOLUME UP/DOWN buttons to adjust the
-7-
128-6115
7 of 16
8. RECALL BUTTON
Remote Controlled VCP Functions
These features can only be used with an Audiovox
Video Cassette Player, if this option was installed with
Press the recall button to recall channel 1 to 6
from memory. Each press of the recall button
will advance the channel number. Stop pressing
the RECALL button when the desired channel
number is displayed on the LCD display.
9. TUNING UP/DOWN BUTTONS
your video package.
12. POWER BUTTON
This button is used to turn the VCP on and off.
13. “REW” REWIND BUTTON
Press the tuning UP/DOWN button to tune the
radio frequency from a low to high frequency
station. The radio is tuned in 200 kHz step size.
Pressing and holding the tuning buttons for more
than two seconds will result in rapid radio tuning
as displayed on the LCD window.
If this button is pushed while the tape is stopped,
the tape will rewind. If this button is pushed while
the tape is playing, the VCP will go into rewind
search mode. For more information consult the
Audiovox VCP owner’s manual.
14. PLAY BUTTON
10. VOLUME UP/DOWN BUTTONS
Press the volume UP/DOWN button to increase
or decrease the volume levels of the headphone
jack.
Press this button to activate play mode while a
tape is loaded into the VCP. This button may also
be used to disengage search and pause modes.
For more information, consult the VCP owner’s
manual.
11. MEMORY BUTTON
Tune to the desired radio station frequency. Press
the memory button repeatedly until the desired
preset number is displayed. Press and hold the
memory button. MEM0 will appear in the display.
The radio station frequency is now stored in the
preset number.
15.“F.FWD.” FAST FORWARD BUTTON
If this button is pushed while the tape is
stopped, tape will fast forward. If this button is
pushed while the tape is playing, the VCP will
go into fast forward search mode. For more
information on the search feature of the VCP,
consult the VCP owner’s manual.
-8-
128-6115
8 of 16
16.REPLAY BUTTON
Pressing this button will rewind tape and
immediately begin playback when the tape is
fully rewound.
The desired frequency is now in memory. The
unit can store 6 radio station frequencies in
memory. The user can change or overwrite the
radio station frequencies using the above
procedure.
17.STOP BUTTON
Press this button to stop the tape.
6. Pressing the Recall button will scroll through the
six presets.
7. Pressing the Volume UP or DOWN button in the
remote control unit will set the desired volume
level in the headphones.
8. Press the Mute button on the remote control unit
to mute the sound in headphone and press Mute
button again to restore the sound to the original
level.
FM Radio Operation
1. If using wired headphones, insert the
headphone set plug into the headphone jack
on the right side of the LCD pod labelled
RADIO EAR. If using wireless headset, switch
the Channel A/B switch to channel B for the
FM radio. Channel A is used for video audio.
2. Press the RADIO POWER button. The LCD
window will display the FM station frequency
and memory channel number.
3. Press the tuning UP or DOWN button to select
the desired radio station.
4. If the radio station is broadcasting in stereo,
then LCD window will display STEREO.
5. Press the Memory button and select the preset
number you wish to assign. The number can be
selected from 1 to 6 sequentially. The selected
number will flash. Press and hold the memory
button until the display stops flashing. The preset
will be stored after 2 seconds. The number will
then be displayed continuously.
-9-
128-6115
9 of 16
Turning the VOH683 On or Off
Operation
1. Sliding the screen release lock forward will
unlock the LCD screen and it will drop down
slightly. Pivot the screen downward until a
comfortable viewing angle is reached. The
internal friction will hold the screen in position
while the system is in use.
2. Pressing the power button on the pod or the
remote will turn the system on or off alternately.
When in use the internal backlighting will
illuminate the controls.
Overhead Dome Lights
The lights integrated into the VOH683 are controlled
by a three position slide switch. Sliding the switch
to the on position will turn the lights on. The off
position will prevent the lights from turning on at all
times and the auto position will allow the lights to
turn on and off with the vehicle’s interior lighting. Do
not leave the vehicle unattended with the dome light
switch in the on position, as this could result in a
discharged battery.
3. After the unit has been turned on and is displaying
a picture, adjust the viewing angle, by pivoting
the screen to optimize the picture quality.
4. Remember to turn the unit off and pivot the LCD
to the locked position when not in use.
Dome
Light
Switch
-10-
128-6115
10 of 16
Remote Sensor
Accessories
Wireless Headphones
The VOH683 incorporates an Infrared sensor which
relays signals from the remote control to allow the
VOH683 and VCP to be controlled simply by pointing
its remote control at the remote sensor eye. This
provides control of auxiliary equipment such as an
Audiovox Video Cassette Player. The infrared sensor
can relay signals from most manufacturer’s remote
controls to the component connected to the Video 1
and 2 inputs, such as a DVD player. In this case
you must use the remote control supplied with
the DVD player.
The VOH683 includes a built-in dual channel infrared
transmitter for use with Audiovox wireless
headphones (Part Number IR2CHS - Dual Channel).
The volume can then be adjusted with the controls
on each headset. The wireless headphones must
be used within a line of sight from the transmitter, as
infrared transmissions, like visible light travel only in
a straight line.
accompanying your Audiovox wireless headphones.
See the documentation
Headset Special Features
Infrared
Transmitter
-Dual Channel.
Remote
Sensor Eye
-Automatic Level Control prevents input
signal over loading.
-Uses high frequency infrared light to assure
a clean signal for clear reception.
Remote
Sensor
Eye
-11-
128-6115
11 of 16
Battery Installation (Fig.2)
Controls and Indicators (Fig.1)
1. Place two alkaline AAA batteries in the
Headphone’s battery compartment making sure
that the battery polarity is correct.
1. INFRARED PICKUP SENSORS – (Receives
signals from transmitter)
2. BATTERY COVER
2. Replace the battery cover.
3. VOLUME CONTROL
4. POWER SWITCH
Fig. 2
5. POWER INDICATOR LED
6. CHANNEL A/B SWITCH
7. AUTO ON/OFF MICRO SWITCH
Fig. 1
R
HEADPHONE OPERATION
1
L
IMPORTANT: To prevent possible ear damage,
Read the following Carefully!
6
2
5
1. Turn the headphone volume down off before
turning on the power. Turn on the headphone
power then increase the headphone volume to a
comfortable level.
3
4
2. Before switching between channels A and B,
remove headphones and turn the volume down
because signal of the other channel could be
louder.
Auto ON/OFF Micro Switch is activated when headphones are
placed on head (shown below)
7
-12-
128-6115
12 of 16
Wired FM Modulator
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio
communications.
Your video system may be equipped with an RF
modulator that allows you to listen to the VOH683’s
video audio signal by tuning your vehicle’s radio to the
selected frequency, (88.7 or 89.1 - Check with your
installer) and turning on the remote mounted RF
modulator switch. (In most cases this toggle switch
will be located underneath the driver’s side of the
dash, check with your installer for the exact location.)
Whenever the RF modulator is on, broadcast radio
reception of the vehicle’s radio will be diminished.
Setting the remote mounted toggle switch off will allow
normal radio reception.
Product Specifications:
Operating range : up to 25 Ft.
Frequency Response : 35 – 18,000Hz
S/N ratio : 60 dB
Video Output
Optional Accessories
The VOH683 provides a video output for an optional
video monitor(s). (Refer to page 7 of the installation
guide for more details.) This output will provide a video
signal that duplicates the signal displayed by the
VOH683 to an additional monitor or video display.
Please see your installer for more information.
Wired Headphone
There are two 1/8” headphone jacks on the VOH683
that can be used with any standard stereo
headphones. The jack, TV EAR, is used to listen to
the video program audio. The audio volume is
controlled by the TV VOLUME up/down buttons. The
jack, RADIO EAR, is used to listen to the FM
broadcast . The audio volume is controlled by the
RADIO VOLUME up/down buttons.
Remove the protective plastic cover to access the
jacks. Remember to replace the cover when the jacks
are not in use.
-13-
128-6115
13 of 16
Audiovox Video Cassette Player (Aux Video 1)
In most installations a VCP will be connected to the
“Video 1” input. To view a video cassette, turn the
VOH683 On and press the source button on its control
panel or the TV / Video button on the remote control
until “Video 1” is displayed on the screen. The VCP
Troubleshooting
SOLUTION
PROBLEM
Poor vehicle in-
dash radio
• Check the condition of the vehicle’s
radio antenna.
reception (FM
modulator
installed)
• Verify that the antenna is fully raised.
• If a wired RF modulator has been
installed, verify that its switch is
turned to the off position.
may also be operated with the remote or the buttons
on its face. The VOH683 is now ready to play the audio
and video signals from the VCP if it is connected to
the “Video 1” input. Inserting a tape into the VCP will
turn it on and automatically activate the play mode. If
a rewound tape had already been loaded into the VCP,
prior to its activation press play on the VCP or on the
remote control to view the tape. For more
information see the operator’s manual accompanying
your VCP.
IR sensor
inoperative
• Verify that the batteries in the remote
are fresh.
• Verify that the remote sensor eye is
not obstructed.
• Verify that the infrared transmitter is
affixed over the sensor eye of the
component to be controlled.
Aux Video 2
Replacement Parts
The second video input may be connected to a DVD
player, video game system, or other audio / video input.
To play the Video 2 source, turn the VOH683 on and
press the source button on the VOH683 or the TV /
Video button on the remote control until “Video 2” is
displayed on the screen. Turn the source component
on with its power button or remote control. The
VOH683 is now ready to play the audio and video
signals from the source connected to video 2 inputs.
Remote Control
136B2063
102B3596
102B3597
IR Sensor Cover
Headphone Jack Cover
-14-
128-6115
14 of 16
Specifications
LCD Backlighting
Edge Light Tube Cold Cathode
Fluorescent Light (CCFL)
Resolution
1152 (RGB) x 234
269,568
Pixels
Operation Temperature
0 - 40°C
32 - 104°F -20 - 80°C
-20 - 80°C
4 - 176°F
Storage Temperature
Backlight Life
Sensitivity
10,000 Hours
35db
Video Display System
Audio Output
NTSC/PAL
0.6W @ 16 Ohms
-15-
128-6115
15 of 16
36 MONTH LIMITED WARRANTY
Applies to Audiovox Mobile Video Products
AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any
part thereof, under normal use and conditions, be proven defective in material or workmanship within 36 months from the date of original
purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair
labor.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated
bill of sale), specification of defect(s), transportation prepaid, to the Company at the address shown below.
This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna problems, to costs incurred
for installation, removal or reinstallation of the product, or to damage to tapes, discs, speakers, accessories, or vehicle electrical systems.
This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through
alteration, improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial number/bar code
label(s). THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT
PROVIDEDABOVEAND,INNOEVENT,SHALLTHECOMPANY'SLIABILITYEXCEEDTHEPURCHASEPRICEPAIDBYPURCHASERFOR
THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY
OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY
WARRANTYHEREUNDERINCLUDINGANYIMPLIEDWARRANTYOFMERCHANTABILITYMUSTBEBROUGHTWITHINAPERIODOF48
MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR
INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No person or
representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage
so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights
which vary from state to state.
U.S.A. : AUDIOVOX ELECTRONICSCORPORATION, 150 MARCUS BLVD., HAUPPAUGE, NEW YORK 11788 l 1-800-645-4994
CANADA : CALL 1-800-645-4994 FOR LOCATION OF WARRANTY STATION SERVING YOUR AREA
128-6115
© Copyright 2001 Audiovox Electronics Corp. 150 Marcus Blvd. Hauppauge, NY 11788
128-6115
16 of 16
|