Audiovox VOD710 User Manual

P
OWER  
P
LAY  
S
TOP  
EJ EC  
T
VOD710  
DROP-DOWN VIDEO  
MONITOR WITH BUILT-IN  
DVD PLAYER  
O N OFF AUTO  
®
ELECTRONICS CORP.  
128-7034  
Date: 12/05/2003  
128-7034  
1 of 26  
Date: 21/5/2003-PROV710 S & PROV710 P ADDED  
Date: 28/5/2003-page7: The DVD Player Perform changed  
Features  
Congratulations on your purchase of the Audiovox  
VOD710 DVD Player with Drop-Down Video Monitor.  
The VOD710 has been designed to give you and your  
family many years of video entertainment in the mobile  
environment. Please read the directions that follow  
to familiarize yourself with the product and to ensure  
that you obtain the best results from your equipment.  
Please note: Installation options vary, see the  
individual owner’s manuals for each component in  
your system to obtain a full understanding of each  
component’s operation.  
7 Inch TFT (Thin Film Transistor) Active  
MatrixLCD(LiquidCrystalDisplay)Monitor  
OSD (On Screen Display) for Control of  
Picture Quality and Functions  
Full Function Remote Control  
Infrared Transmitter for IR Wireless  
Headphones  
OneAudio / Video Input  
Safety Precaution  
Dome Lights with Switch  
For safety reasons, when changing video media it is  
recommended that the vehicle is not in motion, and  
that you do not allow children to unfasten seat-belts  
to change video media or make any adjustments to  
Backlit Controls for Low Light Operation  
the system.  
System adjustments can be  
accomplished using the remote control unit, while  
seat-belts remain fastened. Enjoy your Audiovox  
entertainment system but remember-safety of all  
passengers remains the number one priority.  
-3-  
128-7034  
3 of 26  
Controls and Indicators Diagram  
1
2
4
P OWER  
P LAY  
S TOP  
EJECT  
3
5
6
6
11  
ON OFF AUTO  
7
8
10  
13  
9
Closed Position  
Open Position  
-4-  
128-7034  
4 of 26  
Main Function Descriptions  
1. DVD disc insertion slot.  
2. Eject ( ) Button – Ejects disc.  
3. Stop ( ) Button – Pressing this button will stop playback.  
4. Power Button – Bright red when system is on, dim when off.  
5. Play ( ) Button – This button is used to enter the play mode.  
6. Dome Lights – provide additional interior illumination.  
7. Three position Dome Light Switch  
Auto – Automatically switches on the dome lights in conjunction with the vehicle’s interior illumination.  
Off – The dome lights will not turn on in this position.  
On – Turns on the dome lights.  
8. Infrared Transmitter and Sensor – Use to transmit audio to wireless headphones. Also allows the remote  
control to operate the VOD710 OSD (On Screen Display) and to control other accessories in the system.  
9. Drop Down LCD Panel.  
10.Screen Release – Moves in direction of the arrow to release the drop down screen.  
11.VOD710 Ventilation Opening.  
12.Source Select Button - Allows the user to select the source: DVD and AV1.  
13.LCD Panel Shut-Off Switch  
-5-  
128-7034  
5 of 26  
Remote Control Operation  
POWER  
EJECT  
16  
17  
1
DISPLAY  
ANGLE  
2
3
4
1
4
2
5
3
6
Battery Installation  
ZOOM  
SOURCE  
AUDIO  
5
6
0
18  
Before attempting to operate your Remote Control,  
install the batteries as described below.  
Ente r  
7
8
19  
20  
21  
1) Turn the Remote Control face down. Using a  
fingernail, lift the battery cover off.  
2) Install two “AAA” batteries as shown. Make  
sure that proper polarity (+ or -) is observed.  
3) Align the cover tabs with the remote control  
and press down until the cover clicks.  
SETUP  
MENU  
REPEAT  
RETURN  
A-B  
9
10  
+
11a  
11b  
12  
13  
14  
22  
23  
24  
25  
26  
The remote control will operate the VOD710. It is not  
a universal remote control and will not control  
equipment from other manufacturers  
15  
-6-  
128-7034  
6 of 26  
DVD Function Descriptions  
*Function control is available on the unit and the remote control.  
1. DVD POWER ON/OFF Button*  
Press this button to turn the VOD710 on.  
Press the button again to turn the VOD710 off.  
2. DISPLAY Button  
Press to display DVD Disc current information.  
Press DISPLAY button  
DVD Player Perform  
Once  
Twice  
Display current TITLE & CHAPTER  
Display current SUBTITLE  
Display current AUDIO language & channel  
Display current ANGLE  
Display A-B current status  
Display REPEAT current status  
Display is turn off  
3 times  
4 times  
5 times  
6 times  
7 times  
3. ANGLE Button  
Press to display & select the camera angles. Each time you press the button, the angle changes.  
Note: The number of angles vary from disc to disc. Not all disc’s contain this option  
4. SUBTITLE Button  
Press to display & select the subtitle language in DVD. Each time you press the button, the subtitle language  
changes.  
Note: The type & number of languages for subtitles vary from disc to disc.  
-7-  
128-7034  
7 of 26  
5. AUDIO Button  
Press to display & select AUDIO language & channel. Each time you press the button, the language or channel changes.  
Note: The languages & channel you can select are vary from disc to disc.  
6. ZOOM Button  
Press this button to zoom the picture.  
Press ZOOM button  
OSD  
DVD Player Perform  
Once  
Twice  
ZOOM x2  
ZOOM x3  
ZOOM x4  
ZOOM x1/2  
ZOOM x1/3  
ZOOM x1/4  
ZOOM OFF  
ZOOM picture 2 times  
ZOOM picture 3 times  
ZOOM picture 4 times  
Reduce picture to 1/2  
Reduce picture to 1/3  
Reduce picture to 1/4  
Normal display  
3 times  
4 times  
5 times  
6 times  
7 times  
7. CURSOR Button (  
)
Use these buttons to do items selection.  
8. MENU Button  
Allows the user to access main menu.  
9. RETURN Button  
Press to return to the main page.  
-8-  
128-7034  
8 of 26  
10. A-B REPEAT Button  
Allows the user to repeat play of a DVD or CD from point A to point B.  
11a. Select Down (-) Button  
Used this button to make picture adjustments in picture select mode.  
b. Select Up (+) Button  
Used this button to make picture adjustments in picture select mode.  
Description of Adjustment Items:-  
Item  
CONTRAST  
Press Select Down(-) button  
Decrease the contrast  
for soft color  
Press Select Up(+) button  
Increase picture  
contrast for vivid color  
To darken the picture  
To brighten the picture  
BRIGHTNESS  
TINT  
Increases the  
greenish skin tones  
Increases the redish  
skin tones  
To decrease the color  
intensity  
To Increase the color  
intensity  
COLOR  
12. SLOW Button  
The DVD viewing speed will be reduced at 1/2, 1/4, 1/8 and 1/16 times the normal speed.  
-9-  
128-7034  
9 of 26  
13. PIX Button (PICTURE SELECT)  
Each time this button is pressed, the on screen picture adjustment display the “adjustment bars” for CONTRAST/  
BRIGHTNESS, COLOR or TINT. Once the desired adjustment bar is displayed, use the Select up/Select Down  
buttons to adjust the setting. The display will automatically turn off if no adjustments are made within 6 seconds, or  
if any other button is depressed.  
14. PAUSE ( ) Button  
DVD disc play will be paused.  
15. STOP ( ) Button *  
DVD disc play will be stopped.  
16. EJECT( ) Button *  
The disc will be ejected disc from disc compartment.  
17. NUMBERS Buttons  
Allows the user to enter the numbers 0 to 9 for selection of CD tracks, DVD chapters, and password setting.  
18. SOURCE Button*  
Video signals from video equipment connected to the audio / video input can be displayed on the monitor by  
pressing this button. Each time the button is pressed, the audio / video source will change in the following sequence:  
DVD andAV1.  
19. ENTER Button  
Used to implement setting selected.  
-10-  
128-7034  
10 of 26  
20. SETUP Button  
Allows the user to select the DVD player’s options (Display, OSD Language, Defaults, Parental Control, Password,  
Exit Setup)  
21. REPEAT Button  
Allows the user to repeat various positions of a DVD, CD or MP3.  
22. NEXT (  
| ) Button  
Allows the user to skip to the next chapter or track.  
23. PREVIOUS ( |  
) Button  
Allows the user to return to the previous chapter or track.  
24. Scan Forward (  
) Button  
Allows the user to search in a forward direction at 2,4, 6, 8, 16 and 32 times the normal speed.  
25. Scan Backward (  
) Button  
Allows the user to search in a backward direction at 2,4, 6, 8 and 32 times the normal speed.  
26. PLAY ( )Button*  
Press this button to activate the play mode while a disc is loaded into the disc compartment.  
-11-  
128-7034  
11 of 26  
Turning the VOD710 On or Off  
1. Sliding the screen release lock forward will unlock the LCD screen and it will drop down slightly. Pivot the screen  
downward until a comfortable viewing angle is reached. The internal friction will hold the screen in position while  
the system is in use.  
2. Pressing the power button on the unit or the remote control will turn the system on or off alternately. When in use  
the internal backlighting will illuminate the controls.  
3. After the unit has been turned on and is displaying a picture, adjust the viewing angle, by pivoting the screen to  
optimize the picture quality.  
4. Remember to turn the unit off and pivot the LCD Panel to the locked position when not in use.  
P
OWE  
R
P
LAY  
S
TOP  
E
J
EC  
T
Overhead Dome Lights  
The lights integrated into the VOD710 are controlled  
by a three position slide switch. Sliding the switch to  
the on position will turn the lights on. The off position  
will prevent the lights from turning on at all times, and  
the auto position will allow the lights to turn on and off  
with the vehicle’s interior lighting. Refer to the Installation  
Manual for the wire connections. Do not leave the  
vehicle unattended with the dome light switch in the on  
position, as this could result in a discharged battery.  
ON OFF AUTO  
Dome  
Light  
Switch  
-12-  
128-7034  
12 of 26  
Remote Sensor  
The VOD710 incorporates an infrared sensor, which will  
relay signals from the remote control to allow the unit to  
be controlled simply by pointing its remote control at the  
remote sensor eye. The repeater function allows control  
of auxiliary equipment such as an Audiovox Video  
Cassette Player. The infrared sensor can relay signals  
from most manufacturer’s remote controls to its  
respective component connected to the Video input. In  
this case you must use the remote control supplied with  
the component.  
P
OWE  
R
PLA  
Y
STO  
P
EJ EC  
T
O
N
O
FF AUTO  
Remote  
Sensor  
Accessories  
Wireless Headphones  
The VOD710 includes a built-in infrared transmitter for use withAudiovox wireless headphones (Part Number MVIRHS).  
The volume can then be adjusted using the controls on each headset. The wireless headphones must be used  
within a line of sight from the transmitter, as infrared transmissions, like visible light travel only in a straight line. See  
the documentation accompanying your Audiovox wireless headphones.  
Headset Special Features  
Automatic Level Control prevents input signal over loading.  
Uses high frequency infrared light to assure a clean signal for clear reception.  
-13-  
128-7034  
13 of 26  
AV1  
This video input may be connected to a Video cassette Player (VCP), video game system, or other audio / video device.  
To access theA/V input, turn the VOD710 on and press the source select button on the VOD710 or the Source button  
on the remote control until “AV1” is displayed on the screen. Turn the video source component on with its power button  
or remote control. The VOD710 is now ready to play the audio and video signals from the source connected to theAV1  
input.  
Video Out  
The VOD710 provides a video output for an optional video monitor(s). (Refer to the Installation Guide for more details.)  
This output will provide a video signal that duplicates the signal displayed by the VOD710 to an additional monitor or  
video display. Please see your installer for more information.  
-14-  
128-7034  
14 of 26  
DVD Basics  
To get the optimum use out of the DVD section, make sure you read this section completely.  
Regional Coding  
Both the DVD player and disc are coded by region. These regional codes must match in order for the disc to play. If  
the codes don’t match, the disc won’t play. This unit’s code is region 1. Other regional codes cannot be played in  
this unit. The unit will display “WRONG REGION.”  
Types of Discs your DVD will play  
DVD discs – DVDs discs which contain video.  
Audio discs – Audio CDs contain musical or sound content only.  
MP3 discs – A disc that contains audio files (for example, a CD-R with downloaded MP3 files).  
Loading and Playing Discs  
Before you load a disc, make sure that it is compatible with the player.  
Note: the following Discs CANNOT be used with this player :  
MiniDisc  
Laserdisc  
CD-I, CD-ROM, DVD-ROM  
To load and Play a Disc  
When you press the Power button the unit will turn on and display the source selected. Select DVD mode and insert  
the disc (Label Up) into the disc compartment. When the disc is half way in it will be automatically pulled in and play  
will begin.  
-15-  
128-7034  
15 of 26  
Settings and Adjustments  
This chapter describes how to set and how to adjust using the on-screen SETUP menu.  
Using the Setup Menu  
Using the setup menu you can do the initial setup and set the various options. You can also select a language for the  
on-screen display, the setup display, and limit play back by children.  
1) Press the SETUP button to display the “setup menu” on the TV screen.  
2) Select the main item you want using the cursor (  
) buttons, and then press the ENTER button.  
To Cancel Using the Setup Display  
Press the SETUP button on the remote.  
Setting the Language for On-Screen Display  
Press the SETUP button and using the  
(
)buttons select “OSD LANGUAGE”.  
OSD (On-Screen Display) Language Menu  
The OSD Language Menu allows the user to select  
the language for the on-screen display. Press  
and  
then use the ( ) buttons to select the desired  
language. The user can select either English, French  
or Spanish for the OSD language.  
-16-  
128-7034  
16 of 26  
Settings for Display  
Press the SETUP button and select Display. The DISPLAY  
SETUP allows you to adjust screen setting (aspect ratio) Press  
and then use the (  
settings.  
)buttons to select the appropriate  
4:3 / PS  
This displays the wide picture on the screen with a  
portion of the left & right side removed.  
4:3 / LB  
This displays the wide picture with black bands on the  
upper and lower portions of the screen.  
16:9  
This displays a picture with black bands on the upper  
and lower portion of the screen.  
Then press ENTER to confirm your selection.  
Defaults Settings  
Press the SETUP button and select Defaults. The DEFAULTS  
SETUP allows you to reset ALL options to the factory default  
Settings. Press and then press Enter to implement the reset  
function.  
-17-  
128-7034  
17 of 26  
Settings for Parental (Parental Control)  
This section of the SETUP Menu allows user to control the content of movie playback from G to NO_PARENTAL.  
The Parental Control function allows you to limit viewing to your preference.  
1. Use the  
buttons to select  
G (Children)  
PG  
PG 13  
R
NC-17  
ADULT (Adult)  
NO_PARENTAL (No Parental Control)  
Note:The lower the value, the more strict the limitation.  
Press the Enter button to confirm the selection.  
2. Input a password in 4 digits using the numeric buttons then press the Enter button.  
The Default password is 3308.  
-18-  
128-7034  
18 of 26  
Settings for Password (Parental Control Password)  
Press the SETUP button and select PASSWORD. The PASSWORD SETUP allows you to change the parental  
control password. Press and then press Enter.  
OLD PASSWORD  
Input the OLD password or the default password (4 digits) using the numeric buttons  
NEW PASSWORD  
Input a NEW password (4 digits)  
CONFIRM PWD  
Confirm the new password by entering the same new password again.  
Then press Enter to implement it.  
-19-  
128-7034  
19 of 26  
Playing Audio CDs  
When playing an audio CD, the DISPLAY Banner appears automatically. It displays the current track , the total amount of  
tracks, and the amount of the time for the track playing. Press the DISPLAY button on the remote to change the DISPLAY  
Banner. The options below show you what happens when you press the DISPLAY button.  
SINGLE REMAIN appears along with the current track playing the and the amount of time left.  
TOTAL ELAPSED appears along with the current track playing the total time playing on the CD.  
TOTAL REMAIN appears along with the current track playing and the amount of time left on the CD.  
SINGLE ELAPSED appears along with the current track playing and the time of that track.  
Using the REPEAT Feature  
The default mode for the Repeat feature is OFF. Pressing REPEAT consecutively changes the repeat options:  
TRACK- repeats the track that is playing.  
ALL- repeats the disc that is playing.  
REPEAT OFF  
-20-  
128-7034  
20 of 26  
Playing MP3 Discs  
MP3 is a format for storing digital audio. An audio CD-quality song can be compressed into the MP3 format with very little  
loss of quality, while taking up much less space. CD-R discs that have been encoded in MP3 format can be played on your  
DVD player.  
Press the DISPLAY button on the remote to DISPLAY Banner. The options below show you what happens when you press  
the DISPLAY button.  
SINGLE ELAPSED appears along with the amount of time the song has played. SINGLE ELAPSED and the time will  
remain on-screen until you press DISPLAY again.  
SINGLE REMAIN appears along with the amount of time left in the song that is playing. SINGLE REMAIN and the  
time that is left remain on-screen until you press DISPLAY again.  
DISPLAY OFF appears and will turn off the display of the amount of the time the song has played.  
MP3  
MP3  
MP3  
MP3  
MP3  
MP3  
-21-  
128-7034  
21 of 26  
Selecting Folders and Songs  
When an MP3 disc is inserted in the player, the screen appears automatically. You can change folders and songs through  
the menu. The DVD player plays the songs in order they were burned on to the disc.  
1. Press the up or down arrow button to go through the folder list on the left side of the screen.  
2. Once the folder you want is highlighted, press Enter and the songs in the folder appear on the right.  
3. Press the up or down arrow button to go through the song list and highlighted the song you want. Press Enter or PLAY  
button to begin playback of the highlighted song.  
Skipping Songs  
Use the Next (  
) button on the remote control to move to the next song. Use the Previous (  
) button to move to the  
beginning of the currently playing song. Press the (  
) button again to move to the previous song.  
Using The Repeat Feature  
The default mode for the Repeat feature is OFF. Pressing REPEAT consecutively changes the repeat options:  
REPEAT ONE- repeats the songs that is playing.  
REPEAT FOLDER- repeats the folder that is playing.  
FOLDER- turns off repeat and returns to regular play mode.  
Selecting a Play Mode  
You can choose what order the songs will play on a disc temporarily. The FOLDER play mode is the default. To access the  
play mode options, press STOP if the disc is playing. Press the right arrow button until the PLAY MODE option is highlighted.  
Use the up or down arrow to choose a option. The play mode options are:  
SINGLE: Play a selected song.  
SHUFFLE : Plays the songs in random order (from within the selected folder)  
-22-  
128-7034  
22 of 26  
Troubleshooting  
SOLUTION  
PROBLEM  
PROBLEM  
SOLUTION  
Check the condition of the vehicle’s  
radio antenna.  
Verify that the antenna is fully raised.  
If a wired RF modulator has been  
installed, verify that it is turned OFF.  
Make sure your DVD is connected  
properly. Make sure all cables are  
securely inserted into the appropriate  
jacks.  
If you are using the IR headphones,  
make sure you turn on the IR power.  
Make sure Modulator is ON and the  
proper Frequency has been  
selected.  
Poor in vehicle  
radio reception  
(FM modulator  
installed)  
No sound or  
distorted sound  
Verify that the batteries in the remote  
are fresh.  
IR sensor  
inoperative  
Verify that the remote sensor eye is  
Can’t advance  
through a movie  
not obstructed.  
You can’t advance through the  
opening credits and warning  
information that appears at the  
beginning of movies because the  
disc is programmed to prohibit that  
action.  
Verify that the infrared transmitter is  
affixed over the sensor eye of the  
component to be controlled.  
• Insert a disc with the label side facing  
up.  
Disc won’t play  
The icon (  
appears on  
screen  
)
• Check the type of disc you put into  
disc tray. This DVD only plays digital  
video discs, audio CDs and MP3s.  
• Both the unit and the disc are coded  
by region. If the regional codes don’t  
match, the disc can’t be played. This  
DVD Player is Region Number 1.  
The feature or action cannot be  
completed at this time because:  
1. The disc’s software restricts it.  
2. The disc’s software doesn’t support  
the feature (e.g., angles)  
3. The feature is not available at the  
moment.  
4. You’ve requested a title or chapter  
number that is out of range.  
• The disc is dirty. Clean it.  
• Condensation has formed. Allow  
player to dry out.  
Play starts, but  
then stops  
immediately  
-23-  
128-7034  
23 of 26  
SOLUTION  
PROBLEM  
Picture is  
The disc might be damaged. Try  
another disc.  
distorted  
It is normal for some distortion to  
appear during forward or reverse  
scan.  
No forward or  
reverse scan  
Some discs have sections that  
prohibit rapid scanning or title and  
chapter skip.  
If you try to skip through the warning  
information and credits at the  
beginning of a movie, you won’t be  
able to. This part of the movie is often  
programmed to prohibit skipping  
through it.  
-24-  
128-7034  
24 of 26  
Replacement Parts  
Specifications  
Remote Control  
136B3469  
LCD Backlighting  
Resolution  
Edge Light Tube  
1440 x 234  
Pixels  
336,960  
Operation Temperature  
Storage Temperature  
Backlight life  
32 -140º F (0 - 60º C)  
-4 - 176º F (20 - 80º C)  
10,000 Hours  
NTSC/PAL  
Video Display System  
Low Level Audio Output  
620 mvp-p  
1 kHz @ -15 dB  
1.0Vp-p @ 75 ohms  
12V DC  
Video Output  
Power Source  
-25-  
128-7034  
25 of 26  
36 MONTH LIMITED WARRANTY  
Applies to Audiovox Mobile Video Products  
AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part  
thereof, under normal use and conditions, be proven defective in material or workmanship within 36 months from the date of original purchase,  
such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.  
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated  
bill of sale), specification of defect(s), transportation prepaid, to the Company at the address shown below.  
This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna problems, to costs incurred  
for installation, removal or reinstallation of the product, or to damage to tapes, discs, speakers, accessories, or vehicle electrical systems.  
This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through  
alteration, improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial number/bar code  
label(s). THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT  
PROVIDEDABOVEAND,INNOEVENT,SHALLTHECOMPANY'SLIABILITYEXCEEDTHEPURCHASEPRICEPAIDBYPURCHASERFOR  
THE PRODUCT.  
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY  
OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY  
WARRANTYHEREUNDERINCLUDINGANYIMPLIEDWARRANTYOFMERCHANTABILITYMUSTBEBROUGHTWITHINAPERIODOF48  
MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR  
INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No person or  
representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product.  
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage  
so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights  
which vary from state to state.  
U.S.A. : AUDIOVOXELECTRONICSCORPORATION, 150MARCUSBLVD., HAUPPAUGE, NEWYORK 11788#1-800-645-4994  
CANADA : CALL 1-800-645-4994 FOR LOCATION OF WARRANTY STATION SERVING YOUR AREA  
© Copyright 2003 Audiovox Electronics Corp. 150 Marcus Blvd. Hauppauge, NY 11788  
128-7034  
128-7034  
26 of 26  

Advent LCD4WM User Manual
Blaupunkt ALICANTE MP36 User Manual
Boss Audio Systems Car Amplifier CX1000 User Manual
Canon PowerShot A460 User Manual
Casio EXILIM EX Z690 User Manual
Grindmaster Crathco D25 User Manual
Hitachi DZ GX5020A User Manual
JVC CS XM620 User Manual
JVC GR DV2000U User Manual
JVC GR DVL109 User Manual