ꢛꢊꢉꢕꢜꢕꢓꢔꢀꢝꢀ
ꢀ
ꢁꢂꢃꢄꢀꢅꢆꢇꢀꢈꢉꢊꢋꢌꢊꢍꢎꢀꢏꢐꢑꢒꢓꢔꢕꢖꢓꢋꢀꢗꢕꢖꢌꢀꢇꢐꢇꢀꢘꢙꢍꢚꢊꢋ
fastene vox entertainment system but remembe ngers remains the
d. Enjoy your Audio r-safety of all passe
number one priority.
Features
· 10.4 Inch (4:3) TFT (Thin Film Transistor) Active Matrix LCD Monitor
· Built-in DVD Player
· Built-in TV Tuner
· AUX Input (for Game/Camcorder)
· OSD (On Screen Display)
· Audio Video Output Jacks
· Two Channel Infrared Transmitter for IR Wireless Headphones
· IR Repeater Sensor
· Headphone Jacks (DVD / TV / Monitor)
· Forward and Rear Remote Sensor
· Dome Lights with Switch
· Backlit Controls for Low Light Operation
· Last Position Memory for DVD
· DVD-R & CD-R/RW Compatible
· Anti-Shock Buffer Memory
· Multi-Angle Support
· Multi-Subtitle Support
· Full Function Remote Control
-2-
Controls and Indicators Diagram
Main Function Descriptions
1. POWER; Press the POWER button to turn the power on and off
2. STOP: Press the STOP button to stop disc playback
3. PLAY: Press the PLAY button. The DVD or Audio CDs will begin to play. If you press the PLAY button
again while the DVD or Audio CDs playing, the DVD will pause.
4. DVD L.E.D. Indicator
This L.E.D. indicator will be illuminated when you select the DVD mode.
5. TV L.E.D. Indicator
This L.E.D. indicator will be illuminated when you select the TV mode.
6. Previous: Pressing this button will select the previous chapter.
7. Exit: Pressing this button will exit the DVD menu.
8. Next: Pressing this button will select the next chapter.
9. Menu: Press this button to access the DVD menu.
10. Enter: This button is used to choose the highlighted selection from the OSD menu. (If the highlighted
selections are numbered the appropriate number key on the remote may be used.)
-3-
11. Eject
DVD disc is stopped and ejected by pressing this button.
12. DVD Disc Insertion Slot
With the label surface up, gently insert the disc into the slot until the loading mechanism engages
and the DVD disc is pulled into the unit.
13. Infrared Transmitter and Sensor
Used to transmit audio to wireless headphones. Also allows the remote control to operate the
VOD1048 and to control other accessories in the system
14. Dome Lights
Provides additional interior illumination.
15. Three Position Dome Light Switch
matically switches on the dome lights in conj
· Auto Auto
· Off … The dome lights will not turn on in this position.
unction with the vehicle's interior illumination.
· On … Turns on the dome lights. Do not leave the switch in this position as it will drain the vehicle
battery.
16. Screen Release
Slide in direction of the arrow to release the drop down screen.
17. Side Remote Sensor Eye
Allows the remote control to operate the VOD1048 and control the other accessories.
18. Headphone Jack
Allows the use of wired headphones with a 1/8" plug for listening to video program audio.
19. Aux input jack
Auxiliary Audio input (Right and Left Channel) and Video input
20. Headphone jack
Allows the use of wired headphones with a 1/8" plug for listening to video program audio.
NOTE: Audiovox recommends the use of the Audiovox HP275 Headphones when using wired headphones.
B AT T E RY INST AL L AT ION
Before attempting to operate your Remote Control, install the batteries as described below.
1) You can use your remote controller within a distance of 7~10m and an angle of 30 degrees from the left
and right sides of the remote Sensor Eye of VOD1048.
2) Install two "AA" batteries as shown. Make sure that proper polarity (+ or -) is observed.
3) The remote control will operate the VOD1048 and most Audiovox VCP's. It is not a universal remote
control and will not control equipment from other manufacturers.
-4-
REMOTE CONTROL OPERATION
- 5-
REMOTE CONTROL FUNCTION DESCRIPTIONS
1. POWER ON/OFF
Press this button to turn the VOD1048 on. The selected video source (DVD/TV/AUX) will be displayed on
screen and the picture will appear in a few seconds. Press the button again to turn the VOD1048 off.
2. SOURCE (DVD/TV/AUX/MONITOR) Button
Video equipment connected to the AUDIO/ VIDEO inputs can be selected and displayed on the LCD
display screen by pressing the button. Each time the button is pressed, the Audio / Video source will
change in the following order DVD, TV, AUX and MONITOR.
3. AUDIO
This button allows you to select the language you prefer from the menu. Note that not all DVDs support
this function.
4. MENU
Pressing this button will enable user to select the DVD main menu.
5. TITLE
Pressing this button will go to the DVD root menu.
6. EJECT/LOAD
Pressing this button will eject or load a disc.
7. LEFT
Use this button to navigate through the menu selections.
8. UP
Use this button to navigate through the menu selections.
9. RIGHT
Use this button to navigate through the menu selections.
10. DOWN
Use this button to navigate through the menu selections.
11. SELECT
Use this button to select the highlighted menu selection.
12. ZOOM
Pressing this button will allow you to enlarge the picture by x2, x3, x4, or reduce by x1/2, x1/3, x1/4.
You may then pan the display by pressing the four arrow buttons (7, 8, 9 and 10).
13. VOLUME UP
Use this button to increase the volume level of the headphone jacks.
14. VOLUME DOWN
Use this button to decrease the volume level of the headphone jacks.
15. MUTE
Pressing this button will mute the audio output.
-6-
16. TV C hannel UP
When in the TV Mode, press this button to increase the TV channel.
17. TV C hannel DOWN
When in the TV Mode, P ress this button to decrease the TV channel.
18. S TOP
P ressing this button will stop playback of the disc.
19. R evers e S can
P ressing this button will allow you to scan the disc backwards at x2, x4, x8, x16, x32 the normal speed.
When in pause mode, it will reverse scan at x1/2, x1/4, 1/8, x1/16 the normal speed.
20. P lay/P aus e
P ressing this button will start the play of the DVD disc. P ressing again will pause the DVD disc.
21. Forward S can
P ressing this button will allow you to scan the disc forwards at x2, x4, x8, x16 x32 the normal speed. When
in pause mode, it will forward scan at x1/2, x1/4, 1/8, x1/16 the normal speed..
22. S UB TITL E
This button controls the language selection and allows you to choose whether the subtitles are on or off.
23. S E T UP
P ressing this button will allow for player settings such as G eneral, Audio, Video, P references and P assword
set up.
24. DIS P L AY
This button turns the screen display on and off. This will display various playback information of the disc.
25. ANG L E
If the DVD disc contains sequences recorded from different camera angles, pressing the button causes the
angle icon to appear and will show you the number of camera angles available and allows you to
change the angle if you wish. The angle function will not work with DVD discs that do not have multiple
angles.
26. NUMB E R (0-9)
These numeric keys allow you to directly enter the highlighted menu chapter, or track selection, and enter a
password.
27. +10
This button will allow you to directly enter the tracks above 10. For instance, track 17 is (+10), then
(7). Track 21 is (+10), (+10), then (1).
28. C L R (C L E AR )
P ressing this button will clear track numbers while in track selection or search mode.
-7-
29. VCP POWER (A/B)
When in VCP Mode, Press this button to turn the VCP on.
When in DVD Mode, Multiple presses of this button will allow you to repeat a sequence A to B audio or A
to B video. To set the starting point, press once, and to set the ending point, press a second time. To
cancel the repeat sequence, press a third time.
30. STOP (RETURN)
When in VCP Mode, Pressing this button will stop playback of the Video Cassette.
When in DVD Mode, This button will allow you to go back to last playing position from Menu screen.
31. REPLAY (PROGRAM)
When in VCP Mode, Pressing this button will replay the Video Cassette.
When in DVD Mode, Pressing this button will allow you to make a favorite program list with program
button on CD or on MP3 disc.
32. (REVERSE SCAN)
When in VCP Mode, Pressing this button will play fast reverse.
When in DVD Mode, this button will allow you to select the time display mode.
33. (
PLAY)
When in VCP Mode, Pressing this button will play the Video Cassette.
When in DVD Mode, This button selects TV type such as NTSC, PAL and Auto.
34.
(FORWARD SCAN)
When in VCP Mode, Pressing this button will play fast forward.
When in DVD Mode, This button will select repeat mode such as Repeat disc, Repeat track, and Repeat
off.
35. PREVIOUS
Pressing this button will select the previous track or chapter.
36. NEXT
Pressing this button will select the next track or chapter.
Overhead Dome Lights
The lights integrated into the VOD1048 are
controlledbyathree-positionslide switch.
Slidingtheswitchtotheonpositionwill turn
thelightson.Theoffpositionwillprevent the
lightsfromturningonatalltimes,andthe
autopositionwill allowthelightstoturnon
Dome Li ght
andoffwiththevehicle'sinteriorlighting.
Switch
RefertotheInstallationManualforthe wire
connections.Donotleavethevehicle
unattendedwiththedomelightswitchinthe
on position,asthiscouldresult ina
dischargedbattery.
-8-
Remote Sensor
Remote Sensor
Eyes
The VOD1048 incorporates two Infrared sensors, which relay signals from the remote control to allow the
unit to be controlled simply by pointing its remote control at the remote sensor eye. The repeater function
allows control of auxiliary equipment such as an Audiovox Video Cassette Player. The infrared sensor can
relay signals from most manufacturers’ remote controls to its respective component connected to the Video
1 input. In this case you must use the remote control supplied with the component.
Wireless Headphones (Optional)
The VOD1048 includes a built-in dual channel infrared transmitter for use with Audiovox wireless
headphones (Audiovox Part Number IR2CHS-Dual channel). The volume can then be adjusted using the
controls on each headset. The wireless headphones must be used within a line of sight from the transmitter,
as infrared transmissions, like visible light travel only in a straight line. See the documentation
accompanying your Audiovox wireless headphones.
Wireless Headset Special Features (Optional)
• Automatic Level Control prevents input signal overloading.
• Uses high frequency infrared light to assure a clean signal for clear reception.
IR2 Input
Any line level audio source may be connected to this input (Satellite Radio, CD Changer etc). The audio
program connected to the IR2 input can be received on the B channel of the dual channel wireless
headphones (Audiovox Part Number IR2CHS).
- 9-
Wired Headphones
Any standard wired headphones with a 1/8 jack can be connected to the headphone jacks.
Wired FM Modulator
The VOD1048 is equipped with audio output jacks that can be connected to an optional FM Modulator
(Part Number FMM100A) to allow the audio to play through the vehicle radio.
DVD OPERATION
Playing a Disc
1 Press the DVD button on your remote control and insert the disc it will automatically begin playback
2 If you have stopped a disc that was playing, you can restart a disc by pressing the Play/Pause button on
the faceplate or your remote control.
Pausing a Disc
To pause a disc that is playing, press the Play/Pause button.
Stopping a Disc
1 To stop a disc that is playing, press the Stop button on your remote control.
The disc can be restarted in the same place by pressing the Play/Pause button.
2
Selecting a Chapter Using the DVD Menu
a root
contain
menu
that, among other options allows you to select a specific chapter
Most DVDs
to play. To use the DVD menu to select a chapter to play, follow the stops below:
1. Press the Menu button on either the remote control or the front panel. The DVD menu is displayed.
2. Use the direction arrows to highlight the chapters option in the menu and press SELECT.
3. Use the direction arrows to highlight the chapter
that you want to play and press SELECT. The menu is
closed and the chapter is immediately played.
Playing from a Specific Time in a Title or Track
ꢀ This feature is available for audio discs and other discs that support the ability to move to a specific time in
a track or title. For example, if a track is 5 minutes and 38 seconds long you can select to start playing
from 5 minutes and 8 seconds so that you only listen to the last 30 seconds of the track.
-10-
1. Press the DISPLAY button on your remote control until the Time option is displayed in the top left
corner of the screen (CD) or the Main Menu screen is displayed (DVD).
2. Use the number buttons on your remote control to enter the time that you want to move to in the
format: mm:ss.
3. When you have finished entering the time, the Time option is closed and the track or title is played
from the time entered.
Playing a Specific Track or Chapter and Title
1. Press the DISPL AY button on your remote control until either the Track or Title and Chapter option is
displayed or the Main Menu screen is displayed.
2. Use the cursor button to highlight "Chapter" and then press the Enter button.
3. Use the number buttons on your remote control to enter the track or title and chapter that you want to
play and then press Enter.
Skipping Through the Chapters or Tracks
As you are playing a disc you can skip to the next or to a previous chapter (on a DVD) or track (on a audio
disc). This is carried out using the Next and
Previous buttons as follows:
.
To skip to the beginning of the next chapter or track, press the
Next button
To skip to the beginning of the current chapter or track, press the Previous button.
To skip to the beginning of the previous chapter or track, press the Previous button twice.
Using the Repeat Features
The repeat feature allows you to repeat a section of a disc once it has finished playing. The following items
can be repeated:
ꢀThe entire disc
ꢀA single track
ꢀA single chapter
ꢀA single title
ꢀA section of the disc between twoselected points
Repeating a Track, Chapter, or Title
1 Play the track, chapter, or title that you want to repeat.
2 Press the REPEAT MODE button on your remote control until the required repeat mode is displayed in
the top left corner of the screen. This can be Repeat Track, Repeat Chapter, or Repeat Title. When the
c
disc reaches the end of the selected tra k, chapter, or title, it will start playing it again.
3 To stop track repeat, press the REPEAT MODE button again until Repeat Off is displayed in the
top left corner of the screen.
Repeating a Section of any Disc
1 Press A > B once to start selection to select the starting point A.
2 Press A > B again to finish selection to select the ending point B.
3 To cancel selection press A > B again.
Playing a Disc at Different Speeds
1 You may play a disc at different speeds in both forward and reverse directions.
remote
2 To play the disc at different speeds in a forward direction use the Forward scan button on your
control. The speeds that can be achieved are:
ꢀX2, X4, X8, X16 and X32 for DVDs and video CDs.
ꢀX2, X4, X8, X16 and X32 for audio discs and mp3s. The audio can be heard at all speeds.
-11-
3 To play the disc at different speeds in reverse use the Reverse scan button on your remote
ꢀ
control. The speeds that can be achieved in reverse are:
X2, X4, X8, X16, X32
Changing Main Menu with Display Key
1. To display the Main Menu for the disc that is playing, press DISPLAY on your remote control.
2. The Main Menu is available to change the way the disc is playing.
ꢀ Changing a Title, Chapter to play
ꢀChanging Audio Language
ꢀSelecting to view Subtitle
ꢀChanging the Angle of View
ꢀEntering a Time to Play
ꢀSetting a Item to Repeat
ꢀChanging the Time Display
Select/ Enter button.
3. Select the options by highlighting the desired option using the cursor buttons then press the
Using the Setup Menu
Once the initial settings have been completed, the player can always operate under the same conditions
whenever the power is switched on. These settings are called SETUP data that are easily modified and
stored using the SETUP menu. The SETUP menu includes the information for GENERAL, AUDIO,
VIDEO, PREFERENCES and PASSWORD controls.
1. Press the STOP button twice, if the disc is being played.
2. To display the
SETUP menu, press the SETUP button.
3. Use the Cursor buttons to highlight the desired item.
5. To exit the SETUP menu, press the SETUP button again
4 Press ent r to select the highlighted item.
GENERAL SETUP
ꢀTV DISPLAY You can select the aspect ratio according to your TV. If the TV on which the
(LetterBox)
movie is played is 16:9 "WIDE". If it is 4:3 type, choose NORMAL/PS (Pan & Scan) or NORMAL/LB
ꢀANGLE MARK You can set up so that the angle mark appears on scenes that contain angle options.
ꢀ OSD LANGUAGE …You can select an OSD language such as English, French, Spanish, etc
ꢀCAPTIONS … Adjust caption options.
.
ꢀSCREEN SAVER … Adjust Screen Saver options.
selections
LAST MEMORY … Adjust Last Memory
AUDIO SETUP
ꢀSPEAKER… You canselect various speaker settings.
ꢀDOLBY DIGITAL… Choose Stereo or Mono mode and adjust Dynamic range.
ꢀEQUALIZER … Choose the desired preset equalizer mode.
ꢀ3D PROCESSING …Use this option to make a reverb effect if you prefer.
ꢀHDCD… Adjust the desired Filter frequency.
VIDEO SETUP
ꢀQuality… Adjust Video quality controlssuch as Sharpness, Brightness, Contrast, Gamma, Hue and
Saturation etc.
-12-
PREFERENCE SETUP
You can select a preference Setup such as:
TV Type: You can select TV Type (PAL, MULTI, NTSC)
PBC: You can select PBC ON and OFF.
AUDIO: Choose the desired language.
SUBTITLE: Choose the desired language.
DISC MENU: Choose the desired language.
PARENTAL Setting: You can select the rating level.
DEFAULT Reset: Setup Menu can be reset to DEFAULT Value.
PASSWORD SETUP
Select the Password option.
Enter your old password and press enter. E nter a new password and press E nter.
Re-enter your new password to confirm then press the ENTER button.
Note: The Default P assword is 3308. This password is always effective even after you have selected
your own password and changed it. To avoid the possibility of others using the default password
to set the parental level and change the password, you can record this default password in another
area and delete it from this manual. S ome discs can be limited depending on the age of users while
some discs cannot.
-13-
SOUND AND PICTURE SETUP
Adjusting the sound settings
The sound settings can be adjusted to suit your personal preference: TREBLE, BASS, BALANCE.
Press the MENU button.
The PICTURE menu is displayed.
1. Use the
(9) button to move to the SOUND menu.
(7) or
2. Use the (8) or 10) button to select one of the following options:
TREBLE
BASS
BALANCE
3. Press the SEL (11) button.
4. Press the (7) or (9) button to adjust the setting to suit your
personal preference.
5. Press the MENU button repeatedly until the menu disappears.
- 14-
CONTRAST, BRIGHTNESS, SHARPNESS, COLOR, TINT
1. Press the MENU button. The PICTURE menu is displayed.
2. Press the SEL button.
s
3. Adjusting the picture setting
Use the (8) or (10)
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
button to select one of the following options:
TINT
4. Press the (7) or (9) button to adjust the setting to your personal preference.
5. Press the MENU button repeatedly until the menu disappears.
-15-
[ M E M O ]
- 16-
TROUBLESHOOTING
Symptom
Possible Cause
Solution
Unit does not turn on
• Main Power Switch
turned off
• Press in Main Power Switch
• No Power
• Check fuses and that the ACC power is on
• Load disc label-side up
Disc does not play
• Disc is loaded
Improperly
• Incorrect disc type
• Check to see that disc is CD, CD-R, CD-RW,
VCD, MP3-CD, DVD-R, DVD-RW or DVD Movie : Other types
will not play.
• Invalid Region Code
• Rating is above
parental preset
• Dirty disc
• Use Region 1 disc only.
• Enter password to override or change
rating settings
• Make sure the disc is free from scratches
and dirt
No picture
No sound
• Intermittent connections • Check all video connections
• Wrong input on monitor • Check input selection of TV or receiver
• Intermittent connections • Check all audio connections
• DVD disc is in fast or
slow mode
• There is no audio playback on DVD discs
during fast or slow modes
Picture is distorted or
jumps during fast forward
or reverse
• MPEG-2 decoding
• Some functions are prohibited by the DVD
software.
Some remote buttons
do not operate during
DVD play : prohibited
symbol appears (see
next page)
• MPEG-2 decoding
• It is a normal artifact of DVD playback for
pictures to jump or show some distortion
during rapid play
The OSD menu is in a
foreign language
• Incorrect OSD language • Change OSD language selection
The symbol appears
• Requested function not • Some functions are prohibited by the DVD
available at this time
software.
Picture is displayed in the • Incorrect match of
• Change aspect ratio settings
wrong aspect ratio
aspect-ratio settings to
disc
Remote control
Inoperative
• Weak batteries
• Sensor is blocked
• Change both batteries
• Clear path to sensor
The picture has
• Damaged disc
• Make sure the disc is free from scratches
occasional distortion
and dirt.
MP3 discs won’t read or • Incorrect record format • Make sure CD is not recorded with variable
they skip
bit rate
• Re-record the CD at a slower rate
-17-
12 MONTH LIMITED WARRANTY
Copyright 2004 Audiovox Corp. 150 Marcus Blvd. Hauppauge, NY 11788
128-7069A
|