P-153B
P-153B
AM/FM/MPX RADIO WITH FOLD-DOWN
DETACHABLE FRONT PANEL,
COMPACT DISC PLAYER,
AUDIO CASSETTE PLAYER,
AND QUARTZ CLOCK
OWNER'S
MANUAL
OPERATING INSTRUCTIONS
3, 4, 5, 6, 7
9
1
16
18
27
15
33
38
10
25
26
P-153B
2
34
19
23
24
35
17
8
29
30 22,32
32
28
31
36,37
20,21
12
11,13
14
1
POWER ON-OFF BUTTON ( PWR )
cally return to the normal indication 5 seconds after the last vol-
ume adjustment or when another function is activated. This con-
trol is also used in conjunction with the Select (SEL) control button
3
Press this button to turn the unit on or off. If the ignition switch is
“on”, the unit will turn on automatically when a compact disc or
audio cassette is inserted.
in
4,
5,
6
and
to adjust the bas7s, treble, balance and fader levels as described
.
2
AUDIO (LEVEL) CONTROL (VOLUME +/-)
3
SELECT (SEL) CONTROL BUTTON
To increase the volume level, turn the VOLUME +/- knob clock-
wise (+ direction). VOL will appear and the volume level will be
shown on the display panel from a minimum of V -- 0 to a
maximum of V -- 46. To decrease the volume level, turn the
knob counter-clockwise (- direction). The display will automati-
This button is used to select the audio function (volume, bass,
treble, balance, or fade) whose setting is adjusted using the
VOLUME +/- control 2. Pressing the SEL button once will set
the unit for volume (VOL) adjustment as described previously.
-3-
Pressing the button additional times will select bass adjustment
(BAS will appear on the display panel) treble adjustment (TRE on
the display), balance (BAL), or fader (FAD). The display will
automatically return to the normal indication 5 seconds after the
last adjustment or when another function is activated.
6
LEFT/RIGHT BALANCE CONTROL
mode by pressing the Select button
To adjust the left-right speaker balanc3e, first select the Balance
so the BAL indication
appears on the display panel. Within 5 seconds of choosing the
Balance mode, turn the VOLUME control 2counter-clockwise to
adjust the stereo balance to the left channel speakers or clockwise
4
BASS CONTROL
To adjust the bass level, first select the Bass mode by pressing to adjust it to the right channel speakers. The balance position
the SEL button
panel.
3
so the BAS indication appears on the display will be shown on the display panel from L 12 (full left) to R 12 (full
right). When the volume level between the left and right speakers
is equal, C 00 will be shown on the display panel. The display will
automatically return to the normal indication 5 seconds after
the last adjustment or when another function is activated.
+/- control
Within 5 se2conds of choosing the Bass mode, turn the VOLUME
counter-clockwise to decrease the bass response
or clockwise to increase it as desired. The level will be shown
on the display panel from a minimum B -- 6 to a maximum of B
+ 6. (B 0 indicates flat response). The display will automatically
return to the normal indication 5 seconds after the last adjustment
or when another function is activated.
7
FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first select the Fader
mode by pressing the Select button so the FAD indication
appears on the display panel. Within 5 seconds of choosing the
Fader mode, turn the VOLUME control counter-clockwise to
3
5
TREBLE CONTROL
2
adjust the front-rear speaker balance to the rear speakers or
clockwise to adjust it to the front speakers. The fader position
will be shown on the display panel from R 12 (full rear) to FAD F
12 (full front). When the level between the front and rear speakers
is equal, C 00 will be shown on the display panel. The display
will automatically return to the normal indication 5 seconds after
the last adjustment or when another function is activated.
the SEL button so the TRE indication appears on the display
To adjust the tre3ble level, first select the Treble mode by pressing
panel. Within 5 seconds of choosing the Treble mode, turn the
VOLUME +/- control 2counter-clockwise to decrease the treble
response or clockwise to increase it as desired. The level will
be shown on the display panel from a minimum T -- 6 to a
maximum of T + 6 (T 0 indicates flat response). The display will
automatically return to the normal indication 5 seconds after the
last adjustment or when another function is activated.
8
LOUDNESS CONTOUR (LOUD)
When listening to music at low volume levels, this feature will
boost the bass and treble ranges to compensate for the
-4-
Pressing either side of the button for longer than 0.5 second and
then releasing will activate the Automatic Seek Tuning function.
The radio will seek the next station in the selected direction and
stop and remain at that frequency.
Pressing and holding either side of the button for longer than 0.5
second will cause the radio to continue tuning rapidly in the
selected direction until the next available station and momentarily
stop there. Tuning in the same direction will continue unless the
the button is released at the desired station.
characteristics of human hearing. Press the LOUD button
momentarily to activate this feature and the indication LOUD will
appear on the display panel. Pressing the button again momentarily
will deactivate the feature (the LOUD indication will disappear from
the display panel).
9
AM/FM BAND SELECTOR (BAND)
During radio operation, each time this button is pressed, the radio
band is changed. The indication AM I, AM II, FM I, FM II or FMIII
will appear on the display panel according to your selection. During
disc or audio cassette play, pressing this button will stop play of
the disc or cassette and switch to radio operation. The disc and/
or cassette will remain in the machine without being ejected. During
bm
LOCAL SELECTION (LOC)
This feature provides automatic selection of signals at which
the radio will stop during Auto-Store (AS) tuning; thus, only strong
(local) stations will be received and selected. When Auto-Store
(AS) tuning is not in effect, LOC will disappear from the display
panel, and the radio will stop at a wider range of signals, including
weaker (more distant) stations.
this time, the
panel to show that a disc and/or tape cassette is still loaded in
the unit. Press the disc play/pause ( ) button to return to
and/or T-IN
icons will remain on the display
disc play from the beginning of the last track in play, or press the
TAPE button to return to cassette play from the beginning of the
last track in play.
bn
MONO/STEREO SELECTION (MO/ST)
When AM I or AM II is selected, the stereo (
disappear from the display.
) indication will
During FM radio operation, this button is used to select mono or
stereo reception of the broadcast signal. Under normal
reception conditions, the unit should be left in the stereo mode
as indicated by the
tuned to an FM stereo signal. If the stereo signal is too noisy for
comfortable listening, press the MO/ST button to switch to
monaural reception (the
display). To return to stereo reception mode, press the button
again so that the indication reappears on the display.
indication on the display panel when
bl
MANUAL UP/DOWN TUNING (
SEEK TUNING
/
) / AUTOMATIC
To manually select a radio station, momentarily press the Up Tuning
) side of the button to advance the unit two digits higher or
indication will disappear from the
(
the Down Tuning (
lower.
) side of the button to tune two digits
-5-
will appear on the display panel, indicating that the station is
now set into that pre-set memory position. The station can
now be recalled at any time by pressing that button.
bo
PRE-SET SCAN (PS) / AUTO-STORE TUNING (AS)
Press this button momentarily to scan the stations pre-set into
each AM band and each FM band. The unit will stop at each pre-
set station for 10 seconds before continuing to the next pre-set
station (the pre-set station number on the display panel will flash
during Pre-Set Scan operation). Press the button again
momentarily to stop Pre-Set Scan operation and remain on the
selected frequency.
4. Repeat the above procedure for the remaining 5 pre-sets on
that band and for the other 4 bands on the unit.
bq
LIQUID CRYSTAL DISPLAY PANEL
The Liquid Crystal Display (LCD) panel displays the frequency,
time, and activated functions.
Pressing and holding the button for longer than 2 seconds will
activate the Auto-Store (AS) Tuning feature which will
automatically scan and enter up to 6 local area stations into the
pre-set memories on the band in use. LOC will be displayed during
station selection. If you have already set the pre-set memories to
your favorite stations, activating the Auto-Store Tuning feature
will erase those stations and enter the new local ones. This
feature is most useful when traveling in a new area where you
are not familiar with the local stations.
NOTE: It is a characteristic of LCD panels that, if subjected to
cold temperatures for an extended period of time, they
may take longer to illuminate than under normal
conditions. In addition, the visibility of the numbers on
the LCD may slightly decrease. The LCD read-out will
return to normal when the temperature increases to a
normal range.
br
FUNCTION DISPLAY
The Function Display consists of a seven-section semi-circular
bar graph, with each section containing nine segments which
provide a visual representation of the volume level. The volume
level is represented by the number of segments in each graph.
As the volume is increased, the number of illuminated segments
will increase.
bp
STATION PRE-SET MEMORIES
To set any of the 6 pre-set memories in each band, use the
following procedure:
1. Turn the radio on and select the desired band.
2. Select the first station to be pre-set using the TUNE/TRACK
or Auto-Store (AS) Controls.
3. Press the pre-set button to be set and continue to hold it in
for approximately 2 seconds. The pre-set number (CH 1-6)
bs
AUXILIARY (AUX) INPUT SELECTION
The radio is equipped with auxiliary audio input connectors
-6-
which can be interfaced to an external audio source. The direction of play as shown by the arrow indications on the display
connectors are compatible with most CD and cassette players or
an MP3 digital audio playback unit. When the external source is
connected and the AUX button is pressed, only that media is
played by the radio; no other input sources (radio, cassette or
CD) are operative.
panel.
NOTE: Observe cassette operation cautions in the Care and
Maintenance section of this manual.
cl
FAST-FORWARD/REWIND BUTTONS (
/
)
bt
TAPE PLAYER SELECTOR (TAPE)
These buttons cause the tape to move rapidly in the direction
This button is used to select the audio cassette player playback
mode. When a cassette is loaded in the unit (T-IN
displayed) and the button is pressed, the TAPE indication also
appears on the display and the tape begins play from the point
at which it was stopped. A second press of the button will initiate
the tape pause mode, and PAUS will appear on the display. To
exit audio cassette play mode, press the BAND button (radio
indicated by the arrows. For example, if the
when the tape is moving from left to right (
button is pushed
on the display
panel), the tape will fast-forward. If the button is pressed while
the tape is moving from right to left ( on the display panel), the
tape will rewind. To stop fast tape movement, lightly push the
opposite button. If the tape is allowed to fast-forward or rewind all
the way to the end, play will automatically begin again from that
point.
play) or the CD play/ pause (
) button (CD play).
During integral CD player operation, this button may be used to
change to tape play without ejecting the disc. The
indication will remain on the display panel to show that the disc
is still loaded in the unit.
cm
TAPE PROGRAM SELECTOR
To manually reverse tape direction and play the other side (program)
of the cassette, lightly push both the Fast-Forward and Rewind
buttons at the same time. The change of direction will be shown
by the arrows on the display panel.
bu
CASSETTE DOOR
Open and fold down the front panel of the unit. Hold the cassette
with the exposed tape edge of the side to be played to the right
and insert it fully into the cassette door (TAPE will appear on the
cn
AUTOMATIC MUSIC SEARCH (AMS)
During tape play, automatic music search allows you to skip to
the beginning of another song or piece of music. To initiate music
search, press the PGM/AMS button to begin search; AMS will
appear at the top of the display. Then press the fast forward
display panel accompanied by the T-IN
direction arrow ( or ), as the cassette is engaged and
begins playing). When the cassette reaches the end on the side
of the tape being played, the unit will automatically change
symbol, and play
(
) or rewind ( ) buttons to skip to another piece of music or
-7-
song, as desired. To exit the AMS mode, press the PGM/AMS
button. AMS will disappear from the display.
cq
TRACK SELECT (
/
)
During disc play the Track Select functions are performed by the
TUNE TRACK button; track select is used to quickly access the
beginning of a particular track. Each time the Forward Track
co
EJECT BUTTON (
)
Tape playback is stopped and the cassette is ejected by pressing
this button. The button is accessible when the front panel of the
unit is released to the fold-down position. Radio operation will
automatically resume when the cassette is ejected.
Select (
higher track number will be selected as shown on the display
panel. Similarly, each time the Backward Track Select ( ) side
) side of the button is pressed and released, the next
of the button is pressed, the next lower track number will be
selected as shown on the display panel.
NOTE: Never leave a cassette engaged in the player when not in
use. Doing so can cause damage to the cassette and/or
mechanism of the unit. Always press the eject button
and remove the cassette before removing the detachable
front panel.
cr
CUE/REVIEW FUNCTIONS (
/
)
During disc play high-speed audible search to any section of the
disc can be made by the Cue and Review functions of the TUNE
TRACK button. Press and hold the Cue (
to advance rapidly in the forward direction (the advancing disc
playing time will be shown on the display panel), or the Review
) side of the button
cp
DISC SLOT
With the front panel in the fold-down position, gently insert the
disc into the slot (label surface facing up) until the soft-loading
mechanism engages and pulls the disc in. The LOAD indication
(
) side of the button to advance rapidly in the backward
direction (the decreasing disc playing time will be shown on the
display panel).
During either function, the elapsed time within each track will
automatically be shown on the display panel.
will momentarily appear on the display. The (
illuminates and becomes animated, and the track number ( T -- 1)
will appear on the display panel.
) indication
CAUTION: This unit is designed for play of standard 5" (12cm)
compact discs ONLY. Do not attempt to u se 3"
(8cm) CD-Singles in this unit, either with or without
an adapter, as damage to the player and/or disc can
occur. Such damage will not be covered by the
Warranty on this product.
cs
DISC PLAY/PAUSE BUTTON (
When a disc is loaded into the player, LOAD momentarily appears
on the display and the symbol lights. These indications are
)
followed by display of the disc track number ( T -- 1, etc.) as the
disc begins to play. To stop disc play, press the BAND button
-8-
(radio) or the CDC button (CD changer). To return to disc player
dm
REPEAT SELECTION (RPT A-B)
operation, press the
button; to pause disc player operation,
During disc play, the RPT A-B button allows you to continuously
repeat a specific selection of music/voice on the disc. This may
entail portions of the same track, a complete track, or several
specific tracks.
press the button again; PAUS will appear on the display.
ct
TRACK SCAN SELECTOR (SCN)
During disc play, press this button to play the first 10 seconds of
each track on the disc (SCN will appear on the display panel).
When a desired track is reached, press the SCN button again to
cancel the function (SCN will disappear from the display panel)
and play of the selected track will continue. Scan mode will also
be canceled by activating the Repeat Play (including A-B),
Random Play, or track select functions.
To set the begining point (A) of the segment, press the RPT A-B
button during play of the segment in question. RPT appears at
the top of the display, and A appears after the track number and
elapsed time at the bottom of the display. After listening to the
complete segment, press the RPT A-B button again to set the
end point (B); b appears after the track number on the display.
The chosen selection of the track or tracks will repeat over and
over until the RPT A-B button is pressed again. RPT and b
disappear from the display.
cu
REPEAT PLAY SELECTOR (RPT A-B)
During disc play, press this button to repeat the play of the selected
track (RPT will appear on the display panel). Play of the track
will continue to repeat until the button is pressed again and the
RPT indication disappears from the display panel. Repeat Play
mode will also be canceled by activating the Track Scan, Random
Play or track select functions.
dn
PROGRAM CD TRACKS (PGM/MEM CLR)
During disc play, the programming function can select up to 24
CD tracks to play in any order. Program works by allowing you to
select a track number for each spot in the playing sequence.
To begin programming, select a desired track number on the disc
by using the TUNE TRACK button; this initiates an up/down scroll
of the CD tracks. When the desired track is found, press the MEM/
CLR button for less than 1 second to enter the track number into
memory. M -- 01 will appear on the display. Repeat this procedure
for each of the other 23 selected tracks in the desired order.
M -- 02-24 will appear on the display.
dl
RANDOM PLAY SELECTOR (RDM)
During disc play, press this button to play the tracks on the disc in
a random shuffled order (RDM will appear on the display panel). In
Random Play mode, the Track Select function will also select
tracks in the random order instead of the normal progression. The
Random Play mode can be canceled by pressing the button again
(RDM indication will disappear from the display panel).
-9 -
To play the CD tracks in the programmed order, press the PGM
button. PGM will appear on the display, and the tracks on the
CD(s) will play in the desired order.
To clear the programmed CD tracks, press the MEM CLR button
for more than 3 seconds. M -- CL will appear on the display and the
programmed tracks will be erased.
During integral CD player or cassette player operation,or during CD
changer operation, a press of the button will call the time display,
but tape or disc play will continue uninterrupted. If the time of day
is not adjusted within 5 seconds, the display will return to the play
mode currently in effect.
dr
THEFT-DETERRENT LED
do
DISPLAY (DISP) BUTTON
Located on the chassis behind the front panel, a Light Emitting
Diode (LED) will flash when the panel is removed. The flashing
light serves as a visual warning to the would-be thief that the unit
has been disabled by removal of the front panel.
During disc play, the elapsed time of the current track is displayed
when this button is pressed once; when pressed a second time,
the remaining playing time on the current track will be displayed.
Pressing the button again (a third time) will revert to the track number
display.
ds
RESET BUTTON
A RESET button is also accessible behind the front panel and
can be used to activate the reset circuitry. However, this feature
should only be activated under the following circumstances as it
will erase the time and pre-set memories:
dp
DISC EJECT (
)
During CD player operation, disc play is stopped and the disc is
ejected when the front panel is folded down and this button on
the front of the chassis is pressed. Radio or CD changer operation
will automatically resume depending on which mode was in
operation prior to disc play. If the disc is not removed from the
unit within approximately 10 seconds of being ejected, it will
automatically be re-loaded into the unit to prevent it from being
1. Upon initial installation after all wiring is completed.
2. If there is a malfunction of any of the switches on the unit,
pressing the RESET button may clear the system and permit
a return to normal operation.
accidentally damaged (
indicate that a disc is loaded in the player). Play of the disc can
be resumed by using the play/pause (
player function.
will appear on the display panel to
dt
FRONT PANEL RELEASE BUTTON (R)
This button is used to release the mechanism that holds the front
panel to the chassis. To detach the front panel, press the button
so that the panel drops to the lowered position. Press the
RELEASE bar at the front edge of the panel and slide the panel
off of the front mounting plate. After removing the panel, push the
front mounting plate back up to the vertical position.
) button to choose CD
dq
TIME/FREQUENCY SELECTOR (T/F)
During radio operation, press this button to call the time display on
the quartz clock. The display will return to the radio frequency
indication after 5 seconds.
-10-
NOTES ON USE OF FRONT PANEL
1. Make sure the front panel is oriented correctly when sliding it into the front mounting plate, as it cannot be attached when up-side
down. Use moderate pressure to fully seat the panel into position.
2. To verify correct panel installation, swing the panel assembly up into position until it locks easily into place. If any resistance is
encountered, re-check panel orientation in chassis mounting plate.
NOTE: When the faceplate is in the upright position, press the release button to lower the faceplate away from the radio chassis.
3. When taking the front panel with you, please use the supplied carrying case to protect the panel from dirt and damage. Make sure
there is no dust or dirt on the electrical terminals on the back of the panel as this could cause intermittent operation or other
malfunctions.
FRONT PANEL
RELEASE BUTTON
CD EJECT
BUTTON
FACE PLATE
RELEASE BUTTON
MOUNTING
PLATE GUIDE (2)
PANEL MOUNTING
PLATE
FRONT PANEL
CD SLOT
SETTING THE CLOCK
1. Switch the vehicle ignition and radio “on”.
2. Press and release the Time/Frequency button to access the time display; then press and hold the T/F button until the time
colon begins to flash.
3. With the time colon flashing, press the Down Tuning (
) button to adjust the hours and AM/PM indication, or the Up
Tuning ( ) button to adjust the minutes indication to the correct time.
4. Five seconds after the last hour or minute adjustment is made, the time will be set into the unit and the display will return to
the normal indication.
-11-
CD PLAYER ERROR CODES
INDICATION
CAUSE
SOLUTION
Er-2
Er-3
Er-4
Disc loading malfunction
Disc eject malfunction
Focus malfunction
Press RESET button and try again.
Press RESET button and try again.
Try a different disc.
The disc may be damaged or dirty.
Er-5
Tracking malfunction
Try a different disc.
The disc may be damaged or dirty.
Er-6
Er-7
SLED malfunction
Press RESET button and try again.
TOC reading malfunction
Try a different disc.
The disc may be damaged or dirty.
Er-8
Disc will not play
Press RESET button and try again.
CAREANDMAINTENANCE
l When cleaning the interior of the vehicle, do not get water or
cleaning fluids on the unit.
l The CD player is a precision instrument and will not operate
properly in extreme hot or cold. In case of such conditions, wait
until the interior temperature of the vehicle reaches a normal
temperaturebeforeusingtheplayer.
Theradioportionofyournew soundsystemdoes not requireany
maintenance. We recommend you keep this manual for refer-
ence to the many features found in this unit as well as how to set
the clock.
The compact disc player section also requires no routine
maintenance,but properunderstandingofits useandhandlingwill
help you obtain maximum enjoyment of its capabilities. The
followingpointsshouldbeobserved:
l If the temperature inside the player gets too hot, a protective
circuit will automatically stop play of the disc. In this case, allow
the unit to cool off before operating the player again.
-12-
l Never insert anything other than a 5" (12 cm) compact disc into
the player as the mechanism can be damaged by foreign
objects.
Cassette Care:
1. Purchaseacassettecleaningkitfromyourlocalretailstore.
Use it! At least every 20 to 30 hours of operation you must
l Do not attempt to use 3" (8 cm) CD-Single discs in this unit,
either with or without an adaptor, as damage to the player and/
or disc may occur. Such damage will not be covered by the
Warranty on this product.
clean the cassette mechanism. A dirty cassette player will
haveapoorsound.
2. Donotusecassettesthatexceed45minutesofplayoneach
side.
3. Do not insert a cassette that appears to be broken, twisted
or dirty or with loose or torn labels on it.
l When not using the disc player, always remove the compact
disc. Do not leave an ejected disc sitting in the disc slot as this
can expose it to sunlight and other causes of damage.
4. Always keep your cassettes away from direct sunlight or
exposure to sub-freezing conditions. If a cassette is cold,
allow it to warm up before use.
5. Do not keep a cassette in the player when not in use.
6. Beforeinsertingacassetteintheplayer,checkthatthetape
is tightly wound on the reels.
l Do not attempt to open the unit chassis. There are no user
serviceable parts or adjustments inside.
l Whenthevehiclewarmsupduringcoldweatherorunderdamp
conditions, moisture may condense on the lens of the disc
player. Should this occur, the player will not operate properly
until the moisture has evaporated.
l TheunitisdesignedwithavibrationdampeningCDmechanismto
minimize interruption of disc play due to normal vibration in a
moving vehicle. When driving on very rough roads, however,
occasional sound skips may occur. This will not scratch or
damage the disc and normal play will resume when the rough
conditions cease.
Take up any excess slack using a pencil to turn the drive
hub in the cassette (see diagram).
As with any cassette player, the cassette section of this sound
systemdoesrequireaminimumofmaintenancetokeepitingood
working condition. The following simple care and maintenance
suggestions should be followed to prevent malfunctions of the
cassette system.
-13-
Handling Compact Discs:
Dirt, dust, scratches, and warpage can cause skips in the
playback and deterioration of sound quality. Please follow these
guidelines to take care of your compact discs:
l Neverusechemicalssuchasrecordsprays, householdcleaners
or thinner to clean compact discs. Such chemicals can
irreparably damage the disc’s surface.
l Discs should be kept in their storage cases when not in use.
l Donotexposediscstodirectsunlight,hightemperaturesorhigh
l Use only compact discs with the mark :
humidityforextendedperiods.
l Fingerprints, dust, and dirt should be carefully wiped off the
disc’s playing surface (shiny side) with a soft cloth. Wipe in a
straight motion from the inside to the outside of the disc.
l Donotstickpaper, tape, orlabelsonthediscsurfacesnorwrite
on them with any type of marker.
SPECIFICATIONS
Size:
3.375" H x 8.375" W x 6.125" D
85.73mm x 212.73mm x 155.57mm
Sensitivity:
AM : 20 uV
FM : 3.0 uV
Operating Voltage: 12 Volts DC, Negative Ground
FM Stereo Separation:
CD Frequency Response:
CD Signal/Noise Ratio:
CD Channel Separation:
CD Distortion:
30 dB
Output Power:
160 Watts Maximum
20-20000 Hz +/- 3dB
(40 Watts x 4 Channels)
70 dB
60 dB
0.10%
Output Wiring:
Floating-Ground Type Designed for use
with 4 Speakers
(Front and Rear Channels Cannot be
Combined (Bridged) for use with 2
Speakers)
Tape Frequency Response: 50-10000 Hz
Tape Signal/Noise Ratio:
Wow and Flutter:
50 dB
0.15% VRMS
Output Impedance: Compatible with 4/8-Ohm Speakers
Low-Level Output: 2.0 Volts (2000 mV)
Tuning Range:
AM : 530-1720 kHz (10kHz Steps)
FM : 87.5-107.9MHz (200kHz steps)
-14-
12 / 24 MONTH LIMITED WARRANTY
Applies to automotive radios, radio/tape players, radio/CD players, CD chang-
AUDIOVOXCORPORATION(theCompany)warrantstotheoriginalretailpurchaserofthisproductthatshouldthisproductoranypartthereof,
under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase,
such defect(s) will be repaired or replaced with new or reconditioned product (at the Company's option) without charge for parts and repair
labor.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated
bill of sale), specification of defect(s), transportation prepaid, to an approved warranty station or the Company at the address shown below.
The warranty period will be extended to 24 months from the date of original purchase if the product is installed by an authorized Prestige
Audio dealer. To claim warranty service during this extended period, the bill of sale must specify that the product was installed by an authorized
Prestige Audio dealer.
This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna problems, to costs incurred
for installation, removal or reinstallation of the product, or to damage to tapes, compact discs, speakers, accessories, or vehicle electrical
systems.
This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through
alteration, improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial number/bar code
label(s). THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT
PROVIDEDABOVEAND,INNOEVENT,SHALLTHECOMPANY'SLIABILITYEXCEEDTHEPURCHASEPRICEPAIDBYPURCHASERFOR
THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY
OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY
WARRANTYHEREUNDERINCLUDINGANYIMPLIEDWARRANTYOFMERCHANTABILITYMUSTBEBROUGHTWITHINAPERIODOF
30 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR
INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No person or
representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product.
U.S.A. : AUDIOVOX CORPORATION, 150 MARCUS BLVD., HAUPPAUGE, NEW YORK 11788 l 1-800-645-4994
CANADA : CALL 1-800-645-4994 FOR LOCATION OF WARRANTY STATION SERVING YOUR AREA
128-5543
-15-
© 2000 Audiovox Corp., 150 Marcus Blvd., Hauppauge, N.Y. 11788
Printed in China
128-6411
-16-
|