HR7011PKG
Two Custom Vehicle Headrests
with 7” LCD Monitors Touch Screen Control
and Built-in
DVD Player for Rear Entertainment
AUX
AUX
OPERATION
MANUAL
128-8938
HR7011PKG
The HR7011PKG contains two vehicle specific headrests. Each has a 7” Monitor with touch screen controls and a built-in DVD Player. This
system allows the users to either watch individual DVDs or watch the same DVD on both monitors. Both users can also share each other’s
program. The full function remote control can operate either unit by selecting M1 or M2 on the remote.
Quick Start Guide
1. Turn on the M1 Monitor. To gain access to the DVD slot, press the top center of the screen frame. The screen will tilt forward.
2. Insert a DVD, CD or MP3 disc into the slot, disc label toward driver. Push down gently on the disc until the player pulls the disc in.
3. Use the touch screen to access the DVD mode.
4. Tilt the monitor to a comfortable viewing position. The headrest itself can be tilted forward to help achieve a comfortable viewing
position.
5. Each wireless headphone has a CH A/CH B switch. Turn the volume down to its lowest setting before putting them on your head.
When sitting in front of the M1 screen, use the CH A switch setting. When sitting in front of the M2 screen, use the CH B switch setting.
Set the headphone to the proper channel and press the Power On/Off switch. The power indicator will light up red.
6. When the DVD menu appears, select the menu item using the cursor keys and touch the OK or play button.
7. If audio playback through the vehicle radio is preferred, use the FM transmitter On/Off button on the remote control. Set the vehicle
radio to the channel selected on the M1 monitor. If interference with a local radio station occurs, set the FM modulator to one of the
other 15 radio frequencies using the CHANNEL SELECT button on the remote control.
8. Turn on the M2 Monitor using the power button on the front of the screen or remote control.
9. Tilt the screen to a comfortable viewing position (the headrest itself can be tilted forward to help achieve a comfortable viewing
position).
10. Touch the screen and touch on M1 or press the SOURCE button on the remote control to view program from M1, or select from the
other available sources: DVD, USB, AV, AUX, and MEDIA for M2 Monitor.
NOTE: To operate the M1 screen, press M1 on the remote control.
To operate the M2 screen, press M2 on the remote control.
3
HR7011PKG SYSTEM OVERVIEW
1) The HR7011PKG SYSTEM is a versatile headrest system. The headrests are referred to as M1 and M2 in this manual.
2) The M1 Monitor is comprised of a 7" Touch Screen TFT LCD monitor with a built-in DVD player that allows the user to select from several sources
(DVD, USB, M2, AV, AUX, MEDIA, and GAME Source). The M1 monitor has a built-in infrared audio transmitter channel (CH A) for use with the two-
channel wireless headphones (CH A).
NOTE: When the DVD menu appears on the screen, touch the desired DVD menu selection to start the DVD playing. Refer to page for 6 operation.
3) The M2 Monitor is comprised of a 7" Touch Screen TFT LCD monitor with a built-in DVD player that allows the user to select from several sources
(DVD, USB, M1, AV, AUX, and MEDIA Source). The M2 monitor has a built-in infrared audio transmitter channel (CH B) for use with the two-channel
wireless headphones (CH B).
NOTE: When the DVD menu appears on the screen, touch the desired DVD menu selection to start the DVD playing. Refer to page for 6 operation.
4) The monitors will display all of the functions with the comprehensive Graphical User Interface (GUI) and can be accessed using the touch screen.
5) The two-channel wireless headphone sets have an A-B switch that allow the users to select the audio from either M1 (CH A) or M2 (CH B).
6) When using the IR remote control, the M1 Monitor will only respond to the remote control unit when the Monitor Select (M1) button on remote control is
pressed. The M2 Monitor only responds to the Remote Control unit when the Monitor Select (M2) button on remote control is pressed.
7) Optional wired headphones allow the user to listen to audio from the system.
8) The M1 and M2 Monitor will accept an audio / video input through the 1/8” jack located on the front of the unit. The audio / video device can be a video
game system, video camera or other input device.
TOUCH SCREEN GRAPHICAL USER INTERFACE (GUI)
AUX
AUX
USB
WIRED HEADPHONE
4
9) Press and release the screen at the top of the screen to release the screen for disc insertion. The headrest itself can be tilted forward to help achieve a
comfortable viewing position. Pressing it again will lock the screen back in the closed position.
PUSH IN
Inner Ring
Hook
Shaft Angle
AUX
Closed Position
USB JACK
PULL UP
WIRED HEADPHONE
10) Insert/Eject disc.
Insert/Eject Disc
19 degrees
19 Degrees
5
HR7011PKG Touch Screen
The touch screen allows the user to start DVD play by touching PLAY MOVIE or any of the DVD menu features on the LCD screen.
Some DVDs will not allow this function. One method is to use the remote control instead of the touch screen. The other method is to touch any of
four corners of the screen to access the DVD menu navigation screen (see below).
Use the up/down/left/right icons to select an item from the DVD menu. Use the Enter /
to start DVD play.
6
CONTROLS AND INDICATORS DIAGRAM
Control Function Description for M1 and M2 Monitor
1
M1/M2 Panel Control
2
1. DVD disc insertion slot
2. EJECT ( ) Button - Press this button to eject the disc
3. MENU/POWER ( ) Button with Power Indicator LED
4. Wired Headphone Jack
5. IR Transmitter LEDs
6. USB Port
7. AUX Jack
8. IR Sensor
9. Graphical User Interface (GUI) Touch Screen
9
3
8
AUX
4
5
6
7
7
Touch Screen For HR7011PKG
Main Page
DVD
Turn on the unit by pressing
the power button located on
the lower left of the unit.
1) Touch the panel then
touch the Home icon to
display the Main Menu. The
Main Menu can also be
accessed by pressing the
MENU button on the unit’s
front panel.
Touch the Main Menu DVD icon to set the source to DVD.
Insert the DVD into the slot, disc label toward driver. Gently push
down on the disc and the disc will load automatically.
USB
Insert the USB device into the USB Slot. Touch the Main Menu
USB icon to set the unit’s source to USB.
Main Menu
M2
Touch the Main Menu M2 icon on the M1 unit to link the M1 unit
to the M2 unit. The M1 unit will now receive its AV from M2.
2) The Main Menu screens
for M1 and M2 contain
the following icons:
M1
Touch the Main Menu M1 icon on the M2 unit to link the M2 unit
to the M1 unit. The M2 unit will now receive its AV from M1.
M1 Unit
DVD, USB, M2, AV,
AUX, MEDIA, GAME,
PIX, SCREEN OFF,
MUTE, FMM.
Main Menu
DVD
AUX
USB
MEDIA
MUTE
M2
AV
Touch the Main Menu AV icon to view the A/V source. The AV
input may be connected to a external video source, video game
system or other audio/video device. Contact your dealer for
more information.
AV
GAME
FMM
SCREEN
OFF
PIX
M1
AUX
Touch the Main Menu AUX icon to route external audio and
video supplied to the unit via the cable adapter.
M2 Unit
Main Menu
DVD
AUX
USB
MEDIA
MUTE
M1
DVD, USB, M1, AV,
AUX, MEDIA, PIX,
SCREEN OFF, MUTE.
MEDIA
Touch the Main Menu MEDIA icon to select the MEDIA display.
AV
GAME
Touch the Main Menu GAME icon to select a game (for M1
only). The GAME selection is controlled by wireless game
controller.
SCREEN
OFF
PIX
M2
8
MUTE
Touch the Main Menu MUTE icon to toggle the unit’s audio
between on and off.
PIX
Touch the Main Menu PIX icon to gain access to the display’s
picture controls. The controls available are BRIGHTNESS,
CONTRAST, COLOR, TINT, and RESET.
SCREEN OFF
Touch the Main Menu SCREEN OFF icon and the screen will
shut off. Touch the screen again to turn it back on. The screen will
turn back on after cycling power.
Adjustment of each control is made by touching + (increase)
(enter) to exit.
or - (decrease), then touching
FMM
Touch the Main Menu FMM icon (For M1 only) to gain access to
the FM Modulator controls.
To turn on the FM Modulator, touch + or - icon, then select the FM
modulator transmission frequency by touching - (decrease) or
COLOR
16
PIX
+ (increase) [88.1MHz ~ 91.1MHz]. Touch
(enter) to exit.
Set the vehicle radio to the selected frequency to listen to the
movie over the vehicle sound system.
The on-screen DVD menu of most DVDs can be used to select a
DVD menu feature such as “Play Movie”, “Scene Select”, etc. by
touching the menu item on the touch screen. For example,
touching “Play Movie” in the below screen will start movie play.
Play Movie
•
•
FMM 88.1 MHZ
Scene Select
OFF
•
•
•
Extras
Audio
COLOR
16
ETC
To turn off the FM Modulator function, touch the OFF icon. Then
touch
(enter) to exit.
NOTE: A small number of DVD discs will not function like this. In
this event, use the remote control to start the movie or select the
different DVD options.
9
REMOTE CONTROL WITH
WIRELESS GAME CONTROL OPERATION
DIRECTION KEYS
2. Use the SELECT button (page up & page down) to display
the games (1-32). Then use the direction buttons to move the
arrow to the desired game. Press START to select the game.
3. A Key : “A Function Key” activates the jump and optional
weapons.
Back View
M1/M2
P1/P2
4. B Key : “ B Function Key” activates Bullet fire and attack.
5. TA Key : TURBO “A” Function Key.
6. TB Key : TURBO “B” Function Key.
7. Press START to begin the game. Press START again at any
time to pause the game.
SELECT
TB
TA
A
B
RESET
8. Return the GAME/REMOTE selector switch to the REMOTE
position after use.
START
GAME/REMOTE
SELECTOR SWITCH
BATTERY COVER
Two-Player Games
Battery Installation
Before attempting to operate your remote control, install the
batteries as described below:
The game source can only be selected from the M1 Monitor.
When playing two-player games, select the GAME source on the
M1 Monitor and select the M1 source on the M2 Monitor.
1) Turn the remote control face down. Using a finger, slide
battery cover off in the direction of the arrow.
2) Install three “AAA” batteries. Make sure that proper polarity
(+ or -) is observed.
3) Align the cover tabs with the remote control and slide the
cover until it locks.
When playing two-player games, use two remote controls and set
the remote controls as follows:
Player 1 (M1 Monitor) sets their remote to Game/M1/P1
Player 2 (M2 Monitor) sets their remote to Game/M1/P2.
The remote control will only operate the M1/M2 Monitors. It is not
a universal remote control and will not control equipment from
other manufacturers.
Single player games can be played on the M2 Monitor but the M1
Monitor must be turned on and set to the GAME source. You
cannot watch a DVD on the M1 Monitor and play a game on the
M2 Monitor. When playing a single player game on the M2
Monitor, set the remote control to GAME/M1/P1 and point the
remote control to the M2 Monitor.
WIRELESS GAME CONTROLLER FUNCTIONAL
DESCRIPTION
1. Position the GAME/REMOTE selector switch to the GAME
position.
10
*
Function control is available on the unit and the remote control.
REMOTE CONTROL FUNCTIONAL DESCRIPTION
1. POWER ( ) Button*
Press this button to turn the unit ON and OFF.
2. MONITOR SELECT
M1 Button – Sets the remote control codes to enable the
control of the M1 Monitor.
37
36
1
2
3
4
M2 Button – Sets the remote control codes to enable the
control of the M2 Monitor.
5
3. TV Mode Select Button
35
6
This function is not available in this model.
Note: Pressing the TV button will disable the DVD and USB
functions. To regain control of these functions, press the DVD
button.
7
8
9
34
33
32
4. DVD Mode Select Button*
Switches certain function keys on the remote control for DVD
functions. See page 13.
10
11
12
31
30
13
14
29
28
5. SYSTEM MENU Button
15
16
27
26
This function is not available in this model.
17
6. SOURCE Button*
25
24
18
19
20
21
For M1: Each time the button is pressed, the audio / video
source will change in the following sequence:
DVD > M2 > AV > AUX > MEDIA > GAME.
For M2: Each time the button is pressed, the audio / video
source will change in the following sequence:
DVD > M1 > AV > AUX > MEDIA.
23
22
11
7. AUTO MEMORY Button (AUTO PROGRAM Button)
This function is not available in this model.
8. SKIP/ SEARCH Button
This function is not available in this model.
9. ERASE / WRITE Button
This function is not available in this model.
10. DISPLAY
Press to display current disc information while the disc is playing. Press cursor (pq) buttons to select the Title or Chapter.
For Title/Chapter selection, use the numeric buttons to enter the desired Title/Chapter selection.
11. FMM ON/OFF Button*
Turns the wireless FM Modulator on or off.
12. CHANNEL SELECT Button*
Selects the wireless FM Modulator Frequency:
(CH1 88.1MHz, CH2 88.3MHz, CH3 88.5MHz, CH4 88.7MHz, CH5 88.9MHz, CH6 89.1MHz, CH7 89.3MHz, CH8 89.5MHz, CH9
89.7MHz, Ch10 89.9MHz, CH11 90.1MHz, CH12 90.3MHz, CH13 90.5MHz, CH14 90.7MHz, CH15 90.9MHz, CH16 91.1MHz).
13. RETURN Button
Press Return Once: Go to disc menu.
Press Return Twice: Go to movies playback.
14. REPEAT Button
Allows the user to repeat a selected title, chapter or track.
12
15. AUDIO Button
Press to display and select the available AUDIO languages in DVD mode. Each time you press the button, the language changes.
Note: The audio languages vary from disc to disc.
16. MENU Button
Pressing the MENU button in DVD mode will cause the DVD root menu to be displayed. When using a USB device, pressing the MENU
button will cause the root menu to be displayed. Pressing the MENU button while listening to MP3 files has no effect. The operation is
prohibited.
Note: Pressing the TV button will disable the DVD and USB functions. To regain control of the functions, press the DVD button.
17. SUBTITLE Button
Press to display and select the available subtitle language in DVD mode. Each time you press the button, the subtitle language changes.
Note:The type and number of subtitle languages vary from disc to disc.
18. PAUSE ( II ) Button*
Allows the user to pause the playback. Pressing pause again or pressing the Play button will resume normal playback.
19. PREVIOUS (9) Button*
Press to return to the previous chapter or track.
20. STOP (n) Button*
Press to stop playback.
21. SCAN BACKWARD (7) Button*
Press to search in the backward direction. Press repeatedly to change the search speed from 2, 4, 8, and 16 times the normal speed.
22. PLAY (u) Button*
Press to activate the play mode when a disc is loaded in the disc compartment.
13
23. SCAN FORWARD (8) Button*
Press to search in the forward direction. Press repeatedly to change the search speed from 2, 4, 8, and 16 times the normal speed.
24. NEXT (:) Button*
Press to skip to the next chapter or track.
25. OK Button (ENTER)*
Used to implement a selected setting or menu option.
26. CURSOR (pqt u)*
Use these buttons to navigate the menu selection on the screen.
27. SETUPButton
Press the DVD button and SETUP button to display the Setup Menu which allows the user to change the DVD player options such as
OSD Language, Video, Rating, etc. Refer to the settings and adjustment section for more information.
28. ZOOM Button
Press this button to enlarge the picture when playing a DVD disc.
Press ZOOM button
Once
Twice
DVD Player performs
Enlarges the picture
Enlarges the picture
3 Times
4 Times
Enlarges the picture
Picture is returned to original size
29. A-B Button
Allows the user to repeat disc playback from point A to point B.
Press A-B button
Once
Twice
On-Screen Display
Repeat A-
DVD Player
Marks the beginning of the section to repeat (Set point A)
Marks the end of the section to repeat (Set point B)
Cancels the A-B repeat function
Repeat A-B
AB Off
3 Times
14
30. IRT ON/OFF Button
Turn the Infrared Transmitter ON or OFF for IR Wireless Headphones. Pressing M1 then IRT ON/OFF will control the IR
Transmitter for M1. Pressing M2 then IRT ON/OFF will control the IR Transmitter for M2.
31. MUTE Button*
Press this button to mute all the audio.
Pressing the button again restores the sound to the previously set level.
32. DAY / NIGHT Mode Button
This function is not available in this model.
33. PIX Button (Picture Select)*
Each time this button is pressed, the on screen picture adjustment displays the “adjustment bar” for BRIGHTNESS, CONTRAST, COLOR,
TINT or RESET. Once the desired adjustment bar is displayed, use the VOLUME (+) / VOLUME (-) button to adjust the setting. The display
will automatically turn off if no adjustments are made within 6 seconds.
34. VOLUME DOWN (-) or UP (+)*
Press to select the level of the picture adjustments when the unit is in picture adjustment mode or to increase or decrease the volume for
the wired headphones.
35. NUMBER Buttons
Allow the user to enter numbers 0 to 9 for selection of CD tracks, DVD chapters, and password.
36. DVD Source*
This button is only active when remote control is in the DVD mode. Each time the button is pressed one of the sources (DVD and
USB) will be selected. If a USB device is not plugged in, it will remain on DVD Source. Press to change source in sequence of DVD
> USB.
37. EJECT ( ) Button
This button is used to eject the disc.
Note: This function is not available on this model. Use the eject button on the DVD player.
15
SETTINGS AND ADJUSTMENTS
The Setup Menu contains features and options that let you customize your DVD player. For example, you can set a language for the on-
screen display or control DVD playback content for children. You can use the remote control or the touch screen to navigate the Setup
Menu.
Using the DVD Setup Menu
Language
Language
Subtitle
Audio
: English
: Off
The Setup Menu can be accessed using either the remote control or the touch screen. To access
the Setup Menu using the touch screen you must have a DVD in the unit and be in DVD Mode.
The remote control can access the DVD Setup Menu by pressing DVD and SETUP.
Video
: English
Rating
Misc
Touch Screen:
1. Touch the touch screen to bring up the DVD control menu.
2. Touch the (tool) icon to bring up the DVD Setup Menu.
3. Touch any of the four settings (Language/Video/Rating/Misc) to access the submenu for that item.
4. Touch the submenu item on the right side of the screen to select it. A submenu will appear. Touch the submenu item to select it.
5. Touch the RETURN icon to return to the DVD movie.
Note: The cursor keys at the bottom of the screen can be used to navigate through the touch screen menu.
Remote Control:
1. Press DVD and SETUP on the remote control to bring up the DVD Setup Menu.
2. Use the UP/DOWN buttons to select any of the four settings (Language/Video/Rating/Misc) to access the submenu for that item.
3. Use the RIGHT ARROW button to highlight the desired menu item. A submenu will appear. Use the UP/DOWN arrow button to
highlight the desired submenu item. Press the OK key to set the item.
4. Use the LEFT ARROW button to return to the settings on the left.
5. Use the SETUP button on the remote control to exit the DVD Setup Menu and return to the movie.
Language
Language
Subtitle
Audio
English
French
Spanish
German
Italian
ü
LANGUAGE SETUP
Language for On-Screen Display
Video
Rating
OSD MENU: The OSD MENU setup allows you to select the language for the on-screen display.
The user can select English, French, Spanish, German or Italian for the OSD language.
Misc
16
Subtitle Setup
Select "SUBTITLE" using the pq button, then press the u button to enter the submenu. Select the
Language
Language
Subtitle
Audio
English
French
Spanish
German
Italian
ü
ü
Video
subtitle language you desire using the pq button, then press OK /
to confirm the setting.
Japanese
Thai
Rating
Press the t button to return.
Note: The subtitle selection is only available for discs that are recorded in the listed languages. If the selected
Chinese
Off
Misc
language is not available, the player will play and display on the screen the original language contained in the disc.
Audio Setup
Select "AUDIO" using the pq button, then press the u button to enter the submenu. Select the
Language
Language
Subtitle
Audio
English
French
Spanish
German
Italian
Video
audio language you desire using the pq button, then press OK /
to confirm the setting.
Japanese
Thai
Rating
Press the t button to return.
Note: The audio selection is only available for discs that are recorded in the listed languages. If the selected
Chinese
Off
Misc
language is not available, the player will play and display on the screen the original language contained in the disc.
VIDEO SETUP
TV Display
The TV DISPLAY setup allows you to adjust screen setting (aspect ratio) from 4:3 or 16:9. Depending
on the DVD format, the screen will appear full or with black bands.
Language
TV Display
TV Type
4 : 3
ü
16 : 9
Video
Rating
Misc
TV Type
The TV Type setup allows you to select the system to fit to the color system of the TV to be connected.
NTSC - Select this type for NTSC TV.
Language
TV Display
TV Type
NTSC
PAL
ü
Video
Rating
PAL - Select this type for PAL TV.
Misc
17
RATING SETUP
Parental Control
This item allows you to limit the content of movie playback from G toAdult. The lower the value,
Language
Parental control
: Adult
Set Password
Video
the more strict the control.
Rating
1. G
Misc
2. PG
3. PG – 13
4. R
5. NC – 17
6.Adult
The rating level can only be changed when the correct password is provided. For first time use to
Language
Parental control
: Adult
Set Password
change the parental control, use the cursor u button to enter parental mode. Press OK /
key in the default password (3308) and press OK /
Press the OK / button again to select the parental level, select the level and press OK /
and
Video
Enter Password
.
Rating
1
7
2
8
3
9
4
0
5
6
.
DEL
Misc
Change Password
To change the password to your own password select “Set Password” mode and press OK /
. Enter the default password (3308) and
press OK /
. Press the OK /
button again and key in a new four digit password. A prompt will appear to “Confirm Password”. Enter
. You will then see a prompt that states “Set Password Successful”.
the new password again and press OK /
Note: The Default Password is 3308. This password is always effective even after you have selected your own password and changed it. To avoid the possibility of
others using the default password to set the parental level and change the password, you can record this default password in another area and delete it from this
manual. Playback of some discs can be limited depending on the age of users while some discs cannot.
18
MISC SETUP
Select "MISC” using the pq button, then press the u button to enter the Misc menu. Select the option
you want to change using the pq button, then press OK /
.
Language
Use Default Settings
Screen Saver : On
Touch Cal
Use Default Settings
Video
This option allows you to reset all options to default settings.
Note: This function will not affect the Rating control settings.
Rating
Do you want to use default setting ?
Yes No
Misc
Screen Saver
This option allows you to set the Screen Saver mode.
ON - Screen saver will appear
Language
Use Default Settings
Screen Saver
Touch Cal
Off
On
Video
ü
OFF - Screen saver will not appear
Rating
Note: The DVD player will enter Screen Saver mode if the unit is inactive for approximately 2 minutes.
Misc
Touch Cal
This option allows you to calibrate the touch screen. Select ‘TOUCH CAL” and press OK /
.
Language
Use Default Settings
Use the q button to select ‘YES”. Press OK/ . Touch each of the panel calibration symbols (+) on
Screen Saver
Touch Cal
Off
Video
No
ü
the panel’s four corners. Once the four corners have been touched, the unit will display “CAL OK” or
“INVALID CAL”. If the calibration is invalid, repeat the procedure until the prompt “CAL OK” is displayed.
After the calibration, the new record will overwrite the old one.
Yes
Rating
Misc
PLAYING DVDs
1. Press the DISPLAYbutton on the remote control to display the status banner.
The banner includes title, chapter, angle, audio, subtitle, title selection, and chapter selection .
2. Title Selection
Press numeric (0~9) buttons to initiate a change of title selection. Then press the OK button to implement the selection.
3. Chapter selection
Press numeric (0~9) buttons to initiate a change of chapter selection. Then press the OK button to implement the selection.
19
Playing MP3 Discs
MP3 is a format for storing digital audio. An audio CD-quality song can be compressed into the MP3 format with very little loss of quality,
while taking up much less space. CD-R discs that have been encoded in MP3 format can be played on DVD player. The DVD player plays
the songs in the order they were burned on to the disc. When playback is started the elapsed time of the track that is playing will be
displayed.
Selecting Folders and Songs
When a device containing MP3 files is loaded in the player, the navigation menu appears automatically.
1. Press p or q to move the highlight to the desired folder (if present) on the left side of the menu and press OK. The songs in the folder will be
displayed on screen.
2. Press p or q to move the highlight to the desired track containing the song and press OK to begin track playback or touch on the track title on
the screen.
Skipping Songs
Use the Next (:) button on the remote control to move to the next song. Use the Previous (9) button to move to the previous song.
00:00:59
1/15
Selecting a Play Mode
Filter
The Filter Mode enables or disables the display of files contained on the media based on their file extension.
Filter
Track 001
Repeat
Mode
Track 002
Track 003
Track 004
Track 005
Track 006
Select
Program Mode
The filter function applies to the following formats:
Audio - Audio data format (MP3, WMA)
Photo - Photo data format (JPEG)
00:00:59
1/15
Video - Video data format (MPEG ,
)
Filter
Audio
Photo
Video
ü
Track 001
Track 002
Track 003
Track 004
Track 005
Track 006
ü
Repeat
ü
Mode
Select
Program Mode
20
Repeat
The Repeat function has 4 options: Off, Single, Folder, and All. Move the cursor to the Repeat function
00:00:59
1/15
Filter
Repeat
Mode
Track 001
Off
Track 002
Track 003
Track 004
Track 005
Track 006
ü
and press OK /
. Each time OK /
is pressed the unit will cycle through the available options.
Single
Folder
All
Off/Single/Folder/All are displayed in that order. The Repeat default is Off.
Select
Program Mode
Off
Turn off repeat function
Single Repeat the song being played until STOP is pressed.
Folder Play all songs in a folder repetitively
All
Play all songs on the disc repetitively
Mode: play mode
The Mode function has 4 options: Normal, Shuffle, Random, and Music Intro. Move cursor to the Mode
00:00:59
1/15
Filter
Track 001
Track 002
Track 003
Track 004
Track 005
Track 006
Repeat
function area and press OK /
repeatedly until the desired mode is displayed.
Mode
Normal
Shuffle
Random
ü
Normal/Shuffle/Random/Music Intro are displayed in that order. The Mode function default is Normal.
Selec
Program M
Intro
Normal: Play all songs in folder once.
Shuffle: Play songs in a folder in a shuffle order. Each song in the folder is played only once.
Random: Play songs in a folder in a random order. Each song in a folder is played only once.
Music Intro: Play each song in order in the folder for 10 seconds. The purpose of the Music Intro
function is to provide a sample of each song for 10 seconds, thereby making it easy to select
and listen to a favorite song.
Select
Set the select mode to Off or On for selected songs.
00:00:59
1/15
Filter
Repeat
Mode
Track 001
Track 002
Track 003
Track 004
Track 005
Track 006
Off
On
Selec
ü
Program M
21
Program Mode
Add
00:00:59
1/15
Set the “Select Mode“ to ON. Select the desired songs from the song list on the left side of the screen.
A check mark will appear next to the song. Touch “Program Mode” and select “Add”. Touch “Program”
to view the play list. Press “Play” to hear the play list.
Filter
Repeat
Mode
Track 001
Track 002
Track 003
Track 004
Track 005
Track 006
Select
Clear
Program Mo
Add
ü
Program
Browser
Program
The selected songs that are added into a new play list will be displayed.
Browser
Touch “Browser” to see the songs contained on the disc.
Clear
Move the cursor to the selected song in the play list and select the songs that you want to delete. Touch “Clear”. The selected songs will be
deleted from the play list.
Note: Disc playback should be off when selecting or deleting a song from the play list.
22
DVD BASICS
To get the optimum use out of the DVD player, make sure you read this section completely.
Types of Discs your DVD Player will play
• DVD* disc - DVD discs that contain video.
• Audio disc - Audio CDs that contain musical or sound content only.
• MP3 disc - A disc that contains audio files (for example, a CD-R with downloaded MP3 files).
* This system is capable of playing most recordable DVD formats. However, due to the variety of disc manufacturers and software,
playback cannot be guaranteed.
Loading and Playing Discs
Before you load a disc, make sure that it is compatible with the player. Insert the disc with the disc label facing toward the driver.
Note: The following Discs CANNOT be used with this player :
• MiniDisc
• Laserdisc
• CD-1, CD-ROM, DVD-ROM, Super Audio CD (SACD), DVD Audio, JPEG, BD (Blu-ray Disc).
To load and Play a Disc
Press the Power button to turn the unit on. Select DVD mode and insert the disc (label facing toward the driver) into the disc compartment.
Push down gently on the disc and the player will pull the disc in.
Audio / Video Inputs and Outputs
Audio Output
The Audio output will provide the Audio signal from the M1 unit. This output can be heard on the Built-In Wireless Modulator.
23
DVD Region Code
The DVD player is preset to a region code at the factory depending on where the DVD player is sold. DVDs from a different region cannot be
played in this unit and the unit will display "WRONG REGION”.
Region 1- USA, Canada
Region 2- Japan, Europe, South Africa, Middle East,
Greenland
24
Region 3- S. Korea, Taiwan, Hong Kong, Parts of
South East Asia
Region 4- Australia, New Zealand, Latin America
(including Mexico)
Region 5- Eastern Europe, Russia, India, Africa
Region 6- China
24
TROUBLESHOOTING
PROBLEM
SOLUTION
IR sensor inoperative
Verify that the batteries in the remote control are fresh.
Verify that the remote sensor eye is not obstructed.
Verify that M1 or M2 has been selected correctly.
Disc won't play
The disc is scratched or damaged. Try another disc.
Check the type of disc you put into disc slot. This unit only plays DVDs, audio CDs and
MP3s.
Both the unit and the disc are coded by region. If the regional codes don’t match, the
disc can’t be played
Verify that the disc label is toward the driver.
The disc is dirty. Clean it.
Play starts, but then stops immediately
Picture pixelates or plays intermittently
Condensation has formed. Allow the player to dry out.
The disc is scratched. Replace the disc.
25
TROUBLESHOOTING
PROBLEM
SOLUTION
No sound or distorted sound
Make sure your DVD player is connected properly. Make sure all cables are securely
inserted into the appropriate jacks.
The disc is loaded backwards. Turn the disc around so that the disc is facing
towards the driver.
The disc is loaded backwards. Turn the disc around so that the disc label is facing
towards the driver.
OSD Displays “Incorrect Disc Format”
Touch screen operation is erratic
Re-calibrate the touch screen. Refer to “Touch Cal” on page 19.
26
CAUTION
1. Keep the monitor clean and dry.
2. Always seek qualified personnel to perform repairs. Never attempt your own repairs.
3. Do not drop the monitor or expose to strong impacts.
4. Do not expose to direct sunlight for extended periods of time.
MONITOR SPECIFICATIONS
1. Type
:TFT Active Matrix LCD
: 1440 (W) x 234 (H)
: 336,960
7. Operating Temperature
8. Storage Temperature
9. Video Display System
10. Back Light Life
: 32°F ~ 125°F (0°C ~ +52°C)
: -22°F ~ 150°F (-30°C ~ +70°C)
: NTSC/PAL
2. Resolution
3. Pixels
4. Back Light
5. Power Source
6. Power Consumption
: LED
: 10,000 hours
: +12 VDC
11. Headphone Audio Output : 0.03W @ 32 ohm
: 28W
27
For Customer Service
Visit Our Website At
WWW.audiovox.com
Product Information, Photos,
FAQ’s Owner’s Manuals
© 2011 Audiovox Electronics Corp., Hauppauge, NY 11788
128-8938
|