AudioSource Car Amplifier 2 Channel Amplifier With Auto Switching Dual Inputs User Manual

AMP 100 User Manual  
2 Channel Amplifier  
With Auto Switching Dual Inputs  
General Features and Specifications  
Heavy Duty Black Aluminum Faceplate  
160W Max Power Amplifier  
Power Consumption 500W  
2 Pair Stereo Inputs  
1 Pair Stereo Outputs  
Auto On (Signal Sensing)  
Auto Input Switching  
A, B, A+B Speaker Selector Switches  
5-Way Speaker Binding Posts  
Unswitched 400W Power Outlet  
User Serviceable Fuse (T4A / 250V)  
Bridgeable Outputs  
Rubber Vibration-Damping Feet  
Net Weight: 9.6 lbs (21.1 kg)  
Dimensions: 2.9” H x 16.5” W x 9.25” D (74mm x 419mm x 235mm)  
Congratulations on your purchase of the AudioSource AMP100 amplifier. We trust that you will enjoy the value and quality of your AudioSource AMP100  
for many years. Please take a few moments to read this manual and retain it for your reference.  
AMP100 Overview  
The AudioSource AMP100 represents the very latest in affordable state of the art in amplifier design. Featuring dual inputs, its inputs are signal sensing,  
which means that the amp can be configured to turn on automatically when music is sensed on the input RCA’s. Input one will override input two  
whenever signal is present. This makes the AMP100 the perfect amplifier as a zone amplifier for multiroom distribution systems. Any time a local  
source is activated, it will take priority over the whole house audio by simply showing signal present at input one of the AMP100. Also, use the AMP100  
as amplification for your computer or video games. The AMP100 also has two pair of speaker outputs to allow the amp to run a main, or ‘A’ pair of  
speakers, as well as an auxiliary, or ‘B’ pair of speakers and allows selection of either, or both, from the front panel of the amplifier.  
!
Note: When using A & B speaker together it is imperative that the speaker systems all be a minimum 8-ohm impedance.  
Technical Specifications  
8 ohm Input Sensitivity to Achieve 50W with THD+N less than 0.02%: 1.4V RMS  
4 ohm Input Sensitivity to Achieve 75W with THD+N less than 0.02%: 1.2V RMS  
Maximum 8 ohm stereo output power at 1% THD+N: 60W  
Maximum 4 ohm stereo output power at 1% THD+N: 75W  
Maximum 8 ohm Bridged-Mono output at 1% THD+N: 160W  
(These specifications were measured with a 1kHz Sine Wave applied to both channels, and both channels driven)  
Frequency Response: +1dB, -0.5dB  
8 ohm, Stereo Power Bandwidth:  
4 ohm, Stereo Power Bandwidth:  
50W @ 8 ohms, <1% THD+N, 20-20kHz  
60W @ 4 ohms, <1% THD+N, 20-20kHz  
Stereo Setup  
In this configuration, the mono switch is set to stereo for stereo operation. Connect the line out jacks from a stereo preamplifier or source to the line  
in jacks of your Amp100. Next connect your speakers to the terminals marked SPKR A (observing proper polarity: see above). Connect a second  
(optional) pair of speakers to the terminals marked SPKR B. Select between the A and/or B speakers using the front panel speaker selection buttons.  
Mono Setup  
In this configuration, the mono switch is set to bridged. Connect the line out from a preamplifier to the right line in of your Amp100. Connect your  
mono speaker to the terminals of your Amp100, following the example in the diagram in figure 2 (previous page). Use the volume control on the front  
panel to adjust the volume. Leave the balance set to the center detent or normal position.  
TELEVISION  
Figure 3  
Application Setup One  
In the application shown above in figure 3, a distributed audio system is connected to the AMP100 as a local zone amplifier via the Line 2 inputs.  
Normally the distributed audio system will be the audio source for the AMP100.  
The distributed audio is then passed on to be used by additional zones or sub zones in the distributed system via the Line 2 outputs.  
The Audio output of a local television is connected to the AMP100 via the Line 1 inputs, and whenever the television is active its signal will take priority  
over the distributed audio signal present at Line 2. However, the distributed audio signal will still be present at Line 2 Out. In this circumstance the  
audio output of the television will be heard via the AMP100. Once turned off, the AMP100 will automatically switch back the distributed audio system  
as an audio source, assuming the television is still active.  
Computer  
TELEVISION  
Figure 4  
Application Setup Two  
In the application shown above in figure 4, the audio output of a local television is connected to the AMP100 as a local source via the Line 2 inputs.  
Normally the television will be the audio source for the AMP100.  
The audio output of a computer’s sound card is connected to the AMP100 via the Line 1 inputs, and whenever the computer is active its signal will  
take priority over the television’s audio signal present at Line 2. In this circumstance the audio output of the computer will be heard via the AMP100.  
Once turned off, the AMP100 will automatically switch to the television as an audio source, assuming the television is still active.  
If any components of this system are missing or damaged  
please call AudioSource directly at:  
1.800.HELP.115  
Safety Instructions  
1) Warning  
16) Cleaning  
To reduce the risk of fire or electric shock, do not expose this appliance  
to rain or moisture.  
The speaker should be cleaned only as recommended be the manufacturer.  
17) Non-Use Periods  
2) Caution  
The power cords of the appliance should be unplugged from the outlet  
when left unused for a long period of time.  
To reduce the risk of electric shock, do not remove cover (or back); no  
user serviceable parts inside. Refer servicing to qualified service personnel.  
Caution  
18) Object and Liquid Entry  
Care should be taken so that objects do not fall and liquids are not spilled  
into the enclosure through openings.  
To prevent electric shock, match the wide blade of the AC plug to the wide  
slot of the AC outlet, and insert fully.  
19) Damage Requiring Service  
Attention  
The appliance should be service by qualified personnel when; a) the power  
cord or the plug has been damaged; b) objects have fallen, or liquid has  
been spilled into the appliance; c) the appliance has been exposed to rain;  
d) the appliance does not appear to operate normally or exhibits a marked  
change in performance; e) the appliance has been dropped, or the enclosure  
damaged.  
Pour eviter les chocs electriques, introduire la lame la plus large de la  
fichedans la borne correspondeante de la prise et pousser jusqu’au fond.  
3) Read Instructions  
All the safety and operating instructions should be read before the appliance  
is operated.  
4) Retain Instructions  
20) Servicing  
The safety and operating instructions should be adhered to.  
5) Heed Warnings  
The user should not attempt to service the appliance beyond that described  
in the operating instructions. All other servicing should be referred to  
qualified service personnel.  
All warnings on the appliance and in the operating instructions should be  
adhered to.  
21) Product Servicing  
6) Follow Instructions  
In the event your AudioSource product fails to operate properly, please  
contact the dealer where you purchased the unit, or you may contact  
AudioSource directly for further assistance.  
All operating and use instructions should be adhered to.  
7) Do not defeat the safety purpose of the polarized or grounding-type  
plug.  
A polarized plug has two blades with one wider than the other. A grounding  
type plug has two blades and a third grounding prong. The wide blade  
or third prong are provided for your safety. If the provided plug does not  
fit into your outlet, consult an electrician for replacement of the obsolete  
outlet.  
LIMITED WARRANTY  
Phoenix Gold International, Inc. (or "AudioSource") warrants this product  
against defects in materials and workmanship for a limited period of time.  
For a period of two years from date of original purchase, we will repair or  
replace the product, at our option, without charge for parts and labor.  
Customer must pay all parts and labor charges after the limited warranty  
period expires. The limited warranty period for factory refurbished products  
expires after ninety (90) days from date of original purchase. This limited  
warranty applies only to purchases from authorized AudioSource Electronics  
retailers. This limited warranty is extended only to the original purchaser  
and is valid only to consumers in the United States.  
8) Only use attachments/accessories specified by the manufacturer.  
9) Use of Cart  
Use only with the cart, stand, tripod, bracket or table specified by the  
manufacturer, or sold with the apparatus. When a cart is used, use caution  
when moving the cart/apparatus combination to avoid injury from tip-over.  
Consumers are required to provide a copy of the original sales invoice  
from an authorized AudioSource dealer when making a claim against this  
limited warranty. This limited warranty only covers failures due to defects  
in materials or workmanship that occur during normal use. It does not cover  
failures resulting from accident, misuse, abuse, neglect, mishandling,  
misapplication, alteration, faulty installation, modification, service by anyone  
other than Phoenix Gold, or damage that is attributable to Acts of God. It  
does not cover costs of transportation to Phoenix Gold or damage in transit.  
10) Disconnect apparatus.  
Unplug this apparatus during lightning storms or when unused for long  
periods of time.  
11) Water and Moisture  
The appliance should not be used near water. For example, near a bathtub,  
wash-bowl, Kitchen sink, laundry tub, in a wet basement, or near a swimming  
pool, etc.  
This warranty will become void if the serial number identification has been  
wholly or partially removed, altered or erased. Repair or replacement under  
the terms of this warranty does not extend the terms of this warranty.  
Should a product prove to be defective in workmanship or material, the  
consumer's sole remedies will be repair or replacement as provided under  
the terms of this warranty. Under no circumstances shall Phoenix Gold be  
liable for loss or damage, direct, consequential or incidental, arising out  
of the use of or inability to use the product. There are no express warranties  
other than described above.  
12) Ventilation  
The appliance should be situated so that its location or position does not  
interfere with its proper ventilation For example, the appliance should not  
be situated on a bed, sofa, rug or similar surface that may block the  
ventilation openings; or be placed in a built in situation, such as a bookcase  
or cabinet that may impede the flow of air through the ventilation openings.  
13) Heat  
The appliance should be situated away from heat sources such as radiators,  
heat registers, or other appliances (including amplifiers) that produce heat.  
14) Power Sources  
The appliance should be connected to a power supply only of the type  
described in the operating instructions or as marked on the appliance.  
15) Power Cord Protection  
Power supply cords should be routed so that they are not likely to be walked  
on or pinched by items placed on or against them, paying particular attention  
to cords at plugs, convenience receptacles, and the point where they exit  
from the appliance.  
Please Read the Safety  
Instructions Carefully!  
AVIS  
CAUTION  
RISQUE DE CHOC ELECTRIQUE  
NE PAS OUVRIR  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
!
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended  
to alert the user to the presence on non-insulated dangerous voltage within the  
product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical  
shock to persons. The exclamation point within an equilateral triangle is intended to  
alert the user to the presence of important operating and maintenance (servicing)  
instructions in the literature accompanying the appliance.  
8100.0294A  
Rev. 08.28.03  
9300 North Decatur Portland, Oregon 97203 USA  
Tel: 503.286.9300 Fax: 503.978.3302  

Audiovox Jensen PS475 User Manual
Blaupunkt RDM 169 US User Manual
Canon 2 8 User Manual
Canon EF24 User Manual
Dual Car Stereo System XDM260 User Manual
Dynex DX NW080 User Manual
Elevation Audio DX500 1 User Manual
Flip Video 3250 00008 User Manual
Havis Shields KR SB 800 User Manual
Ikelite ZR930 User Manual