American Audio American DJ Supply, Inc Car Speaker CPX 8A User Manual

CPX Speakers  
Professional Powered Two-Way  
Loudspeakers  
11/13  
CPX Speakers  
Handling Precautions  
ELECTRICAL PRECAUTIONS  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
The lightning flash with arrowhead symbol, within an  
equilateral triangle, is intended to alert the user to the  
presence of uninsulated "dangerous voltage" within the  
product'senclosurethatmaybeofsufficientmagnitude  
to constitute a risk of electric shock to persons.  
The exclamation point within an equilateral triangle is  
intended to alert the user to the presence of important  
operating and maintenance (servicing) instructions in  
the literature accompanying the appliance.  
CAUTION: TO REDUCE THE RISK OF ELECTRIC  
SHOCK, DO NOT REMOVE THE COVER (OR BACK).  
THERE ARE NO USER SERVICEABLE PARTS  
INSIDE REFER SERVICE TO YOUR AUTHORIZED  
AMERICAN AUDIO® SERVICE TECHNICIAN.  
IMPORTANT SAFETY INSTRUCTIONS  
OBJECT AND LIQUID ENTRY - Never push objects of  
READ INSTRUCTIONS — All the safety and operating  
GROUNDING OR POLARIZATION  
instructions should be read before the product is  
operated.  
Ifthisproductisequippedwithapolarizedalternating  
current line plug (a plug having one blade wider than  
theother), itwillfitintotheoutlet onlyoneway. This  
isasafetyfeature.Ifyouareunabletoinserttheplug  
fullyintotheoutlet, tryreversingtheplug. Iftheplug  
should still fail to fit, contact your electrician to  
replace your obsolete outlet. Do not defeat the  
safety purpose of the polarized plug.  
any kind into this product through openings as they  
may touch dangerous voltage points or short-out  
parts that could result in a fire or electric shock.  
Never spill liquid of any kind on the product.  
RETAIN INSTRUCTIONS — The safety and operating  
instructionsshouldberetainedforfuturereference.  
HEED WARNINGS — All warnings on the product and  
in the operating instructions should be adhered to.  
FOLLOW INSTRUCTIONS — All operating and use  
instructions should be followed.  
SERVICING — Do not attempt to service this product  
yourself as opening or removing covers may expose  
you to dangerous voltage or other hazards. Refer all  
servicing to qualified service personnel.  
CLEANING — The product should be cleaned only with  
a polishing cloth or a soft dry cloth. Never clean with  
furniture wax, benzine, insecticides or other volatile  
liquids since they may corrode the cabinet.  
If this product is equipped with  
a
three-wire  
DAMAGEREQUIRINGSERVICE - Unplugthisproduct  
from the wall outlet and refer servicing to qualified  
service personnel under the following conditions:  
groundingtypeplug,aplughavingathird(grounding)  
pin, itwillonlyfitintoagroundingtypepoweroutlet.  
Thisisasafetyfeature.Ifyouareunabletoinsertthe  
plug into the outlet, contact your electrician to  
replace your obsolete outlet. Do not defeat the  
safety purpose of the grounding type plug.  
When the power-supply cord or plug is damaged.  
If liquid has been spilled, or objects have fallen into  
the product.  
ATTACHMENTS  
Do not use attachments not  
recommendedbytheproductmanufacturerasthey  
may cause hazards.  
WATER AND MOISTURE — Do not use this product  
near water — for example, near a bathtub, wash  
bowl,kitchensink,orlaundrytub;inawetbasement;  
or near a swimming pool; and the like.  
ACCESSORIES — Do not place this product on an  
unstable cart, stand, tripod, bracket, or table. The  
product may fall, causing serious injury to a child or  
adult, and serious damage to the product. Use only  
If the product has been exposed to rain or water.  
Iftheproductdoesnotoperatenormallybyfollowing  
theoperatinginstructions.Adjustonlythosecontrols  
that are covered by the operating instructions as an  
improper adjustment of other controls may result in  
damage and will often require extensive work by a  
qualified technician to restore the product to its  
normal operation.  
POWER-CORD PROTECTION - Power-supply cords  
should be routed so that they are not likely to be  
walked on or pinched by items placed upon or  
against them, paying particular attention to cords at  
plugs,conveniencereceptacles,andthepointwhere  
they exit from the product.  
OUTDOOR ANTENNA GROUNDING — If an outside  
antennaorcablesystemisconnectedtotheproduct,  
be sure the antenna or cable system is grounded so  
astoprovidesomeprotectionagainstvoltagesurges  
andbuilt-upstaticcharges.Article810oftheNational  
ElectricalCode,ANSI/NFPA70,providesinformation  
with regard to proper grounding of the mast and  
supporting structure, grounding of the lead-in wire  
to an antenna discharge unit, size of grounding  
conductors, location of antenna-discharge unit,  
connection to grounding electrodes, and  
requirementsforthegroundingelectrode.SeeFigure  
A.  
LIGHTNING — For added protection for this product  
duringalightningstorm,orwhenitisleftunattended  
and unused for long periods of time, unplug it from  
the wall outlet and disconnect the antenna or cable  
system. This will prevent damage to the product  
due to lightning and power-line surges.  
POWER LINES An outside antenna system should  
notbelocatedinthevicinityofoverheadpowerlines  
or other electric light or power circuits, or where it  
can fall into such power lines or circuits. When  
installing an outside antenna system, extreme care  
should be taken to keep from touching such power  
lines or circuits as contact with them might be fatal.  
OVERLOADING — Do not overload wall outlets,  
extensioncords,orintegralconveniencereceptacles  
as this can result in a risk of fire or electric shock.  
If the product has been dropped or damaged in any  
way.  
When the product exhibits a distinct change in  
performance — this indicates a need for service.  
with  
a
cart, stand, tripod, bracket, or table  
recommended by the manufacturer, or sold with  
the product. Any mounting of the product should  
follow the manufacturer’s instructions, and should  
use a mounting accessory recommended by the  
manufacturer.  
REPLACEMENT PARTS -- When replacement parts  
arerequired,besuretheservicetechnicianhasused  
replacement parts specified by the manufacturer or  
have the same characteristics as the original part.  
Unauthorizedsubstitutionsmayresultinfire,electric  
shock, or other hazards.  
SAFETY CHECK - Upon completion of any service or  
repairs to this product, ask the service technician to  
performsafetycheckstodeterminethattheproduct  
is in proper operating condition.  
CART — A product and cart combination should be  
moved with care. Quick stops, excessive force, and  
uneven surfaces may cause the product and cart  
combination to overturn.  
WALL OR CEILING MOUNTING — The product should  
not be mounted to a wall or ceiling.  
HEAT The product should be situated away from heat  
sources such as radiators, heat registers, stoves, or  
other products (including amplifiers) that produce  
heat.  
VENTILATION — Slots and openings in the cabinet are  
provided for ventilation and to ensure reliable  
operation of the product and to protect it from  
overheating, and these openings must not be  
blocked or covered. The openings should never be  
blocked by placing the product on a bed, sofa, rug,  
or other similar surface. This product should not be  
placed in a built-in installation such as a bookcase or  
rack unless proper ventilation is provided or the  
manufacturer’s instructions have been adhered to.  
POWER SOURCES —This product should be operated  
only from the type of power source indicated on the  
marking label. If you are not sure of the type of  
power supply to your home, consult your product  
dealer or local power company.  
ANTENNA  
LEAD IN  
WIRE  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
LOCATION – The appliance should be installed in a  
stable location.  
NONUSE PERIODS – The power cord of the appliance  
should be unplugged from the outlet when left un-  
used for a long period of time.  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
Fig. A  
NEC — NATIONAL ELECTRICAL CODE  
©American Audio®  
-
-
Instruction Manual Page 3  
CPX Speakers  
Safety Precautions  
CPX Speakers loudspeaker can easily reproduce sound pressure levels (SPL) sufficient enough to  
cause sever and permanent hearing damage. A great degree of care should be taken to protect your  
ears to prolong exposure to SPL in excess of 85dB.  
For adult use only - Keep out of the reach of children.  
Be sure all power is turned off before making speaker connections  
When using the speaker make sure the grille is always attached.  
Always use a power cord that meets the manufactures exact power specifications  
Disconnect from main power before making any type of connection  
To reduce the risk of electrical shock or fire, do not expose this unit rain or moisture  
This speaker is intended for indoor use only, use of this product outdoors voids all warranties.  
Always mount this speaker in safe and stable matter.  
Power Cord Protection - Power supply cords should be routed so that they are not likely to be  
walked on or pinched by items placed upon or against them, paying particular attention to cords  
at plugs, convenience receptacles, and the point where they exit from the speaker.  
Heat -The speaker should be situated away from heat sources such as radiators, heat registers,  
stoves, or other mixers (including amplifiers) that produce heat  
Be sure to save the packing carton in the event the unit needs to be returned for service  
Read all documentation before attempting to operate your new mixer. Please save all your docu-  
mentation for future reference  
Do not spill water or other liquids in to or on to your speaker  
Be sure that the local power outlet matches that of the required voltage for your speaker.  
Do not attempt to operate this speaker if the power cord has been frayed or broken. Please route  
your power cord out of the way of foot traffic  
Always have the gain controls set to their lowest level during initial power-up to prevent  
speaker damage  
Servicing - The user should not attempt to service the speaker beyond that described in this  
manual. All other servicing should be referred to qualified service personnel. The speaker should  
only be serviced by qualified personal when;  
A. Objects have fallen, or liquid has been spilled into the speaker  
B. The speaker has been exposed to rain or water  
C. The speaker does not appear to operate normally or exhibits a change in performance  
D. The terminal/cross-over plate has been damaged  
©American Audio®  
-
-
Instruction Manual Page 4  
CPX Speakers  
Main Features  
CPX 8A:  
CPX 10A:  
• 8-Inch Woofer  
• 10-Inch Woofer  
• 200W Built-In Bi-Amplifier  
• XLR Mic Input  
• 250W Built-In Bi-Amplifier  
• XLR Mic Input  
• XLR & RCA Line Inputs  
• XLR & TRS Line Outputs  
Treble & Bass EQ +/-12dB  
• Built-In Pole Mount Socket  
• Built-in Heavy Duty Carrying Handles  
• Attached heavy Duty Rubber Feet  
• XLR & RCA Line Inputs  
• XLR & TRS Line Outputs  
Treble & Bass EQ +/-12dB  
• Built-In Pole Mount Socket  
• Built-in Heavy Duty Carrying Handles  
• Attached heavy Duty Rubber Feet  
CPX 12A:  
CPX 15A:  
• 12-Inch Woofer  
• 15-Inch Woofer  
• 500W Built-In Bi-Amplifier  
• XLR Mic Input  
• 500W Built-In Bi-Amplifier  
• XLR Mic Input  
• XLR & RCA Line Inputs  
• XLR & TRS Line Outputs  
Treble & Bass EQ +/-12dB  
• Built-In Pole Mount Socket  
• Built-in Heavy Duty Carrying Handles  
• Attached heavy Duty Rubber Feet  
• XLR & RCA Line Inputs  
• XLR & TRS Line Outputs  
Treble & Bass EQ +/-12dB  
• Built-In Pole Mount Socket  
• Built-in Heavy Duty Carrying Handles  
• Attached heavy Duty Rubber Feet  
CPX Speakers  
Registration  
The CPX Speakers carry a one year (365 days) limited warranty. Please fill out the enclosed war-  
ranty card to validate your purchase. All returned service items whether under warranty or not, must  
be freight pre-paid and accompany a return authorization (R.A.) number. The R.A. number must be  
clearly written on the outside of the return package. A brief description of the problem as well as the  
R.A. number must also be written down on a piece of paper and included in the shipping container.  
If the unit is under warranty, you must provide a copy of your proof of purchase invoice. You may  
obtain a R.A. number by contacting customer support at (800) 322-6337. All packages returned to  
the service department not displaying a R.A. number on the outside of the shipping package will be  
returned to the shipper unopened.  
The serial and model number for this unit is located on the rear panel Please write down the num-  
bers here and retain them for future reference.  
Model No.________________________________  
Serial No.________________________________  
Date Purchased___________________________  
Dealer Name______________________________  
©American Audio®  
-
-
Instruction Manual Page 5  
CPX Speakers  
Controls and Features  
Rear of CPX Speakers  
3
4
1
2
11  
10  
5
6
7
8
9
©American Audio®  
-
-
Instruction Manual Page 6  
CPX Speakers  
Rear Panel:  
Controls and Features  
1. LINE LEVEL INPUT VOLUME – This knob is used to regulate the output signal of the line level  
source connected to the Line Level Input Jack (5).  
2. OUTPUT VOLUME - This knob is used to regulate the output volume. Turning the knob in a clock-  
wise direction will increase the volume level.  
3. TREBLE CONTROL – This knob is used to adjust the amount treble applied to the output signal.  
The maximum amount of treble gain is +12dB and the maximum amount of treble decrease is  
-12dB. Turning the knob in a counter-clockwise direction will decrease the amount of treble applied  
to a channel signal, turning the knob in a clockwise direction will increase the amount of treble  
applied to a channel signal.  
4. BASS CONTROL – This knob is used to adjust the amount bass applied to the output signal. The  
maximum amount of bass gain is +12dB and the maximum amount of bass decrease is -12dB.  
Turning the knob in a counter-clockwise direction will decrease the amount of bass applied to a  
channel signal, turning the knob in a clockwise direction will increase the amount of bass applied to  
a channel signal.  
5. BALANCED XLR/RCA COMBO LINE INPUT – This connection is designed to accept a balanced  
line input signal from a mixer or other line level device with a balanced output jack. Use a balanced  
cable when the signal cable length exceeds 15 feet, this will reduce excessive signal loss. Be sure  
to connect only line level input devices such as mixers and tape machines to this jack.  
6. XLR PARALLEL OUTPUT JACK – This jack is used to send the incoming line level signal from  
either of the Line Level Inputs Jacks to another CPX Speakers or other line level input jack such as  
a mixer or power amp.  
7. VOLTAGE SELECTOR SWITCH – Because power supplies vary from location to location we have  
incorporated a selectable voltage switch. This switch can select a voltage input of 115v~60Hz or  
230v~50Hz. Always disconnect the power plug before changing the voltage.  
8. MAIN POWER SWITCH – This is the main power ON/OFF button. Before main power is  
applied, be sure you have made all connections to the speaker. Remember to avoid damaging  
pops to the speakers, the mixer is turned on first and turned off last.  
9. MAIN POWER INLET – This connector is used to supply main power to the unit via the included  
detachable power cord. The power connection uses an I.E.C. type connector, use only the sup-  
plied polarized AC power cord. Use only a power cord that matches this type of connection. Be  
sure to only connect this unit to a power outlet that matches the printed power label on the unit.  
Never use a power when the ground prong has been removed or broken off. The ground prong is  
used to reduce the risk of electrical shock in case of an electrical short. This cord is designed to  
fit in one direction only. Do not attempt to force a cord if it does not fit, be sure the cord is being  
inserted properly.  
FUSE HOLDER – This housing stores a 7Amp protective fuse. Always replace with the exact  
same type fuse, unless otherwise instructed, by an authorized American Audio® service techni-  
cian. Replacing with any other type of fuse than that of the recommended fuse will void your unit  
warranty.  
10. MIC XLR/1/4” INPUT – This jack will accept a XLR or 1/4” plug. The volume output level for this  
microphone will be controlled by the MIC Volume knob (11).  
11. MIC LEVEL - This knob is used to regulate the microphone output volume. Turning the knob in a  
clockwise direction will increase the volume level.  
©American Audio®  
-
-
Instruction Manual Page 7  
CPX Speakers  
Typical Speaker Set-Up  
Typical Speakers Output Set-Up  
XLR Balanced Cables  
©American Audio®  
-
-
Instruction Manual Page 8  
CPX Speakers  
Looping Speakers  
CPX Speakers Looping  
From Mixer  
To Next CPX Speakers (If Applicable)  
©American Audio®  
-
-
Instruction Manual Page 9  
CPX Speakers  
Mounting Options  
Pole Mounting – The CPX Speakers also include a pole mount option.  
The pole mount socket located on the bottom of the speaker may be  
used to secure the speaker to a speaker tri-pod, such as the American  
Audio® SPS-1B as illustrated on the left. Always be sure to follow the  
guidelines listed below when pole mounting your speaker;  
• Always be sure the stand is designed to support the weight of  
the speaker  
• In outdoor situations that are prone to windy conditions and  
strong wind gust, be sure to use sandbags as additional tri-pod  
support, this will greatly reduce the risk of tipping  
• Do not stack speakers on top of each other when mounting on  
a tri-pod. Only one speaker should be mounted to a tri-pod at one  
time.  
• Always position the tri-pod legs away from foot traffic  
• Extend the tri-pod legs to their fully extended position to avoid  
accidental tipping  
• Observe and follow all safety guidelines and regulations specified  
by the tri-pod’s manufacturer  
• Be sure the tri-pod is situated on a flat, level, and stable surface  
• Always tighten all tri-pod locks.  
©American Audio®  
-
-
Instruction Manual Page 10  
CPX Speakers  
Available Accessories  
Speaker Rigging Hardware – The CPX Speakers may be permanently installed or mounted  
using any of the available third party wall brackets and ceiling mounts available. Always be sure to  
follow all safety instructions and guidelines included with the mounting hardware for safe and proper  
installation. American Audio® carries an assortment of rigging hardware specially designed to work  
with the CPX Speakers. Please contact your dealer for more information and availability.  
SPS-1B - Speaker Stands - American Audio® carries the SPS-1B speak-  
er stand, which can be used to raise the speakers during use The SPS-1B  
is a sturdy aluminum tri-pod and includes a mounting socket bracket for  
added security. The SPS-1B can raise the speaker to a maximum height  
of six feet and has a maximum weight capacity of 80 pounds. SPS-1B;  
weight = 6lbs, pipe diameter - 1 3/8”  
Speaker Rigging Hardware - American Audio® car-  
ries an assortment of rigging hardware specially de-  
signed to work with the CPX Speakers. Warning:  
Mounting and/or suspension of loudspeakers requires  
experienced professionals. Improperly installed loud-  
speakers can result in property damage, personal  
injury and/or liability to the installing contractor. Al-  
ways ensure that the hardware can bare more than  
the speaker load.  
©American Audio®  
-
-
Instruction Manual Page 11  
CPX Speakers  
Warranty  
1-YEAR LIMITED WARRANTY  
A. American Audio® hereby warrants, to the original purchaser, American Audio® products to be  
free of manufacturing defects in material and workmanship for a period of 1 Year (365 days) from  
the date of purchase. This warranty shall be valid only if the product is purchased within the  
United States of America, including possessions and territories. It is the owner’s responsibility to  
establish the date and place of purchase by acceptable evidence, at the time service is sought.  
B. For warranty service, send the product only to the American Audio® factory. All shipping charges  
must be pre-paid. If the requested repairs or service (including parts replacement) are within the  
terms of this warranty, American Audio® will pay return shipping charges only to a designated  
point within the United States. If the entire instrument is sent, it must be shipped in its original  
package. No accessories should be shipped with the product. If any accessories are shipped  
with the product, American Audio® shall have no liability whatsoever for loss of or damage to  
any such accessories, nor for the safe return thereof.  
C. This warranty is void if the serial number has been altered or removed; if the product is modified  
in any manner which American Audio® concludes, after inspection, affects the reliability of the  
product; if the product has been repaired or serviced by anyone other than the American Audio®  
factory unless prior written authorization was issued to purchaser by American Audio®; if the  
product is damaged because not properly maintained as set forth in the instruction manual.  
D. This is not a service contract, and this warranty does not include maintenance, cleaning or peri-  
odic check-up. During the period specified above, American Audio® will replace defective parts  
at its expense, and will absorb all expenses for warranty service and repair labor by reason of  
defects in material or workmanship. The sole responsibility of American Audio® under this war-  
ranty shall be limited to the repair of the product, or replacement thereof, including parts, at the  
sole discretion of American Audio®. All products covered by this warranty were manufactured  
after January 1, 1990, and bear identifying marks to that effect.  
E. American Audio® reserves the right to make changes in design and/or improvements upon its  
products without any obligation to include these changes in any products theretofore manufac-  
tured.  
F. No warranty, whether expressed or implied, is given or made with respect to any accessory sup-  
plied with products described above. Except to the extent prohibited by applicable law, all  
implied warranties made by American Audio® in connection with this product, including warran-  
ties of merchantability or fitness, are limited in duration to the warranty period set forth above.  
And no warranties, whether expressed or implied, including warranties of merchantability or  
fitness, shall apply to this product after said period has expired. The consumer’s and or Dealer’s  
sole remedy shall be such repair or replacement as is expressly provided above; and under no  
circumstances shall American Audio® be liable for any loss or damage, direct or consequential,  
arising out of the use of, or inability to use, this product.  
G. This warranty is the only written warranty applicable to American Audio® Products and super-  
sedes all prior warranties and written descriptions of warranty terms and conditions heretofore  
published.  
©American Audio®  
-
-
Instruction Manual Page 12  
CPX Speakers  
Technical Specifications  
Model: American Audio® CPX 8A  
Dimensions:  
Weight:  
11.75” (L) x 10.5” (W) x 18” (H) / 295mm x 265mm x 452mm  
31 Lbs. / 14 kgs  
Fuse:  
7 Amp  
Environmental conditions:  
Operational temperature: 5 to 35˚C (41 to 95˚F)  
Operational humidity:  
Storage temperature:  
30Hz - 18KHz  
90° x 60°  
25 to 85% RH (non-condensation)  
-20 to 60˚C (4 to 140˚F)  
Frequency Response:  
Nominal Dispersion:  
Built-In Bi-Amplifier:  
200W  
Amplifier Section:  
Power supply:  
Accessories:  
AC 115v/60Hz or 230v/50Hz  
I.E.C. Power Cord  
Low Frequency:  
High Frequency:  
8” (210mm), 2” (50mm) Voice Coil  
25mm Voice Coil, 1” (25mm) Throat  
Input Sensitivity:  
Line:  
Mic:  
0.5V  
9m V  
Output Sensitvity:  
Max. SPL:  
93dB(1m/1w)  
112dB  
Input Impedance:  
Balanced:  
Line 20K Ω, Mic 3.6K Ω  
Unbalanced:  
Line 10K Ω, Mic 1.8K Ω  
Crossover:  
Low Pass:  
Low Cut:  
2nd Order Filter 2.7KHz @ 12dB/octave  
2nd Order Filter 30Hz @ 12dB/octave  
S/N Ratio:  
Line 100dB, Mic 80dB  
Channel Equalizer:  
Bass:  
100Hz +12dB  
Treble:  
10KHz +12dB  
Europe Energy Saving Notice  
Energy Saving Matters (EuP 2009/125/EC)  
Saving electric energy is a key to help protecting the enviroment.  
Please turn off all electrical products when they are not in use. To  
avoid power consumption in idle mode, disconnect all electrical  
equipment from power when not in use. Thank you!  
©American Audio®  
-
-
Instruction Manual Page 13  
CPX Speakers  
Technical Specifications  
Model: American Audio® CPX 10A  
Dimensions:  
Weight:  
13.75” (L) x 12.75” (W) x 20.5” (H) / 347mm x 320mm x 516mm  
40 Lbs. / 17.95 kgs  
Fuse:  
7 Amp  
Environmental conditions:  
Operational temperature: 5 to 35˚C (41 to 95˚F)  
Operational humidity:  
Storage temperature:  
30Hz - 18KHz  
90° x 60°  
25 to 85% RH (non-condensation)  
-20 to 60˚C (4 to 140˚F)  
Frequency Response:  
Nominal Dispersion:  
Built-In Bi-Amplifier:  
250W  
Amplifier Section:  
Power supply:  
Accessories:  
AC 115v/60Hz or 230v/50Hz  
I.E.C. Power Cord  
Low Frequency:  
High Frequency:  
10” (255mm), 2” (50mm) Voice Coil  
25mm Voice Coil, 1” (25mm) Throat  
Input Sensitivity:  
Line:  
Mic:  
0.5V  
9m V  
Output Sensitvity:  
Max. SPL:  
93dB(1m/1w)  
114dB  
Input Impedance:  
Balanced:  
Line 20K Ω, Mic 3.6K Ω  
Unbalanced:  
Line 10K Ω, Mic 1.8K Ω  
Crossover:  
Low Pass:  
Low Cut:  
2nd Order Filter 2.7KHz @ 12dB/octave  
2nd Order Filter 30Hz @ 12dB/octave  
S/N Ratio:  
Line 100dB, Mic 80dB  
Channel Equalizer:  
Bass:  
100Hz +12dB  
Treble:  
10KHz +12dB  
©American Audio®  
-
-
Instruction Manual Page 14  
CPX Speakers  
Technical Specifications  
Model: American Audio® CPX 12A  
Dimensions:  
Weight:  
15” (L) x 14.25” (W) x 23” (H) / 378mm x 360mm x 580mm  
48 Lbs. / 21.4 kgs  
Fuse:  
7 Amp  
Environmental conditions:  
Operational temperature: 5 to 35˚C (41 to 95˚F)  
Operational humidity:  
Storage temperature:  
30Hz - 18KHz  
90° x 60°  
25 to 85% RH (non-condensation)  
-20 to 60˚C (4 to 140˚F)  
Frequency Response:  
Nominal Dispersion:  
Built-In Bi-Amplifier:  
500W  
Amplifier Section:  
Power supply:  
Accessories:  
AC 115v/60Hz or 230v/50Hz  
I.E.C. Power Cord  
Low Frequency:  
High Frequency:  
12” (312mm), 2.5” (65mm) Voice Coil  
34mm Voice Coil, 1” (25mm) Throat  
Input Sensitivity:  
Line:  
Mic:  
0.5V  
9m V  
Output Sensitvity:  
Max. SPL:  
95dB(1m/1w)  
116dB  
Input Impedance:  
Balanced:  
Line 20K Ω, Mic 3.6K Ω  
Unbalanced:  
Line 10K Ω, Mic 1.8K Ω  
Crossover:  
Low Pass:  
Low Cut:  
2nd Order Filter 2.7KHz @ 12dB/octave  
2nd Order Filter 30Hz @ 12dB/octave  
S/N Ratio:  
Line 100dB, Mic 80dB  
Channel Equalizer:  
Bass:  
100Hz +12dB  
Treble:  
10KHz +12dB  
©American Audio®  
-
-
Instruction Manual Page 15  
CPX Speakers  
Technical Specifications  
Model: American Audio® CPX 15A  
Dimensions:  
Weight:  
Fuse:  
18” (L) x 15.5” (W) x 27” (H) / 456mm x 390mm x 680mm  
62 Lbs. / 28 kgs  
7 Amp  
Environmental conditions:  
Operational temperature: 5 to 35˚C (41 to 95˚F)  
Operational humidity:  
Storage temperature:  
30Hz - 18KHz  
90° x 60°  
25 to 85% RH (non-condensation)  
-20 to 60˚C (4 to 140˚F)  
Frequency Response:  
Nominal Dispersion:  
Built-In Bi-Amplifier:  
500W  
Amplifier Section:  
Power supply:  
Accessories:  
AC 115v/60Hz or 230v/50Hz  
I.E.C. Power Cord  
Low Frequency:  
High Frequency:  
15” (390mm), 2.5” (75mm) Voice Coil  
44mm Voice Coil, 1” (25mm) Throat  
Input Sensitivity:  
Line:  
Mic:  
0.5V  
9m V  
Output Sensitvity:  
Max. SPL:  
97dB(1m/1w)  
118dB  
Input Impedance:  
Balanced:  
Line 20K Ω, Mic 3.6K Ω  
Unbalanced:  
Line 10K Ω, Mic 1.8K Ω  
Crossover:  
Low Pass:  
Low Cut:  
2nd Order Filter 2.7KHz @ 12dB/octave  
2nd Order Filter 30Hz @ 12dB/octave  
S/N Ratio:  
Line 100dB, Mic 80dB  
Channel Equalizer:  
Bass:  
100Hz +12dB  
Treble:  
10KHz +12dB  
NOTES:  
The specifications are subject to change to any improvement by negotiations in advance.  
The parts are subject to change to any improvement within the range of the specifications.  
Europe Energy Saving Notice  
Energy Saving Matters (EuP 2009/125/EC)  
Saving electric energy is a key to help protecting the enviroment.  
Please turn off all electrical products when they are not in use. To  
avoid power consumption in idle mode, disconnect all electrical  
equipment from power when not in use. Thank you!  
©American Audio®  
-
-
Instruction Manual Page 16  
©American Audio® World Headquarters:  
6122 S. Eastern Ave. Los Angeles, CA 90040 USA  
Tel: 323-582-3322 Fax: 323-725-6100  
American DJ Europe  
Junostraat 2  
6468 EW Kerkrade  
Netherlands  
Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99  

ARC Audio FD4625 User Manual
Bazooka Marine inspired SCUBA8 User Manual
Bosch Appliances 15SBI User Manual
Bosch Appliances Camcorder LTC 0435 User Manual
Canon EF70 User Manual
Dell Car Video System E1713S User Manual
Fellowes C 220 User Manual
Gitzo Leveling G1228LVL User Manual
Infinity Systems Inc Car Speaker 9612i User Manual
JBL GTO527 User Manual