Alpine cda 7873 User Manual

CDA-7977

FM/AM CD Player

CDA-7876

CDA-7875

CDA-7873

FM/AM CD Receiver

• OWNER'S MANUAL

Please read before using this equipment.

• MODE D'EMPLOI

Veuillez lire avant d'utiliser cet appareil.

• MANUAL DE OPERACIÓN

Léalo antes de utilizar este equipo.

ALPINE ELECTRONICS, INC.

Tokyo office: 1-1-8 Nishi Gotanda,

Shinagawa-ku,

ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.

6-8 Fiveways Boulevarde Keysborough,

Victoria 3173, Australia

ALPINE ELECTRONICS FRANCE S.A.R.L.

(RCS PONTOISE B 338 101 280)

98, Rue De La Belle Etoile, Z.I. Paris Nord Il

B.P. 50016 F-95945, Roissy, Charles De Gaulle

Cedex, France

Tokyo 141-8501, Japan

Tel.: (03) 3494-1101

Tel.: (03) 9769-0000

ALPINE ELECTRONICS GmbH

Kreuzerkamp 7-11 40878 Ratingen, Germany

Tel.: 02102-45 50

Tel.: 01-48 63 89 89

ALPINE ELECTRONICS OF AMERICA, INC.

19145 Gramercy Place, Torrance,

California 90501, U.S.A.

ALPINE ELECTRONICS OF U.K., LTD.

13 Tanners Drive, Blakelands, Milton Keynes

MK14 5BU, U.K.

ALPINE ITALIA S.p.A.

Via C. Colombo 8, 20090 Trezzano Sul Naviglio

MI, Italy

Tel.: 1-800-ALPINE-1 (1-800-257-4631)

Tel.: 01908-61 15 56

ALPINE ELECTRONICS OF CANADA, INC.

Suite 203, 7300 Warden Ave. Markham,

Ontario L3R 9Z6, Canada

Tel.: 02-48 47 81

ALPINE ELECTRONICS DE ESPAÑA, S.A.

Portal De Gamarra 36, Pabellón 32

01013 Vitoria (Alava)-Apdo. 133, Spain

Tel.: 34-45-283588

Tel.: 1-800-ALPINE-1 (1-800-257-4631)

Dalian Ikemiya Printing Co., Ltd.

4 Jin Zhou Street Economic & Technical Development

Dalian China

Printed in China (Y)

68P01434K28-O

ENGLISH

Contents

Operating Instructions

Radio Operation

Manual Tuning ................................................ 14

Automatic Seek Tuning .................................. 14

Manual Storing of Station Presets .................. 15

Automatic Memory of Station Presets ............ 15

Tuning to Preset Stations ................................ 15

WARNING

WARNING..................................................2

CAUTION ...................................................2

PRECAUTIONS .........................................2

CD Player Operation

Opening and Closing the Movable display ..... 16

Playback .......................................................... 16

Music Sensor (Skip)........................................ 17

Fast Forward and Backward ........................... 17

Repeat Play ..................................................... 17

M.I.X. (Random Play) .................................... 17

Scanning Programs ......................................... 17

Controlling CD Changer (Optional) ............... 18

Multi-Changer Selection ................................. 19

Basic Operation

Detaching the Front Panel................................. 4

Attaching the Front Panel ................................. 4

Initial System Start-Up ..................................... 4

Turning Power On and Off ............................... 4

Display Angle Adjustment ................................ 5

Adjusting Volume/Balance (Between Left and

Right)/Fader (Between Front and Rear) ........ 5

Selecting BBE Mode ........................................ 5

Audio Mute Function ........................................ 5

Displaying Time................................................ 5

Setting Time ...................................................... 6

Changing Lighting Color (CDA-7876 only)..... 6

Dimmer Control ................................................ 6

Subwoofer On and Off ...................................... 6

Sound (Beep) Guide Function .......................... 7

Turning Mute Mode On/Off.............................. 7

CD Text Scroll Setting ...................................... 7

Setting the AUX Mode (V-Link)....................... 8

Demonstration................................................... 8

Setting the Bass Control ................................... 9

Setting the Treble Control ................................. 9

Adjusting the built in Crossover ....................... 9

Setting Bass Forward ...................................... 10

Defeat .............................................................. 10

Switching the Tuner Mode .............................. 10

Blackout Mode On and Off (CDA-7977

XM Radio Operation

Receiving XM Channels with the XM Receiver

(Optional) .................................................... 20

Checking the XM Radio ID Number .............. 21

Storing XM Channel Presets........................... 21

Receiving Stored XM Channels...................... 21

Category Search .............................................. 22

Changing the Display...................................... 22

Remote Control Operation

(CDA-7977/CDA-7876/CDA-7875 only)

Controls on Remote Control ........................... 23

Battery Replacement ....................................... 24

Information

In Case of Difficulty ....................................... 25

Specifications .................................................. 27

Installation and Connections

Warning ........................................................... 28

Caution ............................................................ 28

Precautions ...................................................... 28

Installation ...................................................... 29

Connections .................................................... 30

only)............................................................. 11

Switching the Display Modes (CDA-7977/

CDA-7876 only) .......................................... 11

Changing the Audio Level Display Pattern

(CDA-7875/CDA-7873 only) ...................... 11

Displaying the Title/Text................................. 12

Titling Discs/Stations ...................................... 13

Searching for Titled Discs/Titled Stations ...... 13

Erasing Disc Title/Station Title ....................... 13

LIMITED WARRANTY

1-EN

WARNING

CAUTION

This symbol means important instructions.

Failure to heed them can result in serious

injury or death.

This symbol means important instructions.

Failure to heed them can result in injury or

material property damage.

DO NOT OPERATE ANY FUNCTION THAT TAKES

YOUR ATTENTION AWAY FROM SAFELY DRIVING

YOUR VEHICLE.

Any function that requires your prolonged attention

should only be performed after coming to a complete stop.

Always stop the vehicle in a safe location before

performing these functions. Failure to do so may result in

an accident.

HALT USE IMMEDIATELY IF A PROBLEM APPEARS.

Failure to do so may cause personal injury or damage to

the product. Return it to your authorized Alpine dealer or

the nearest Alpine Service Center for repairing.

DO NOT MIX NEW BATTERIES WITH OLD

BATTERIES. INSERT WITH THE CORRECT BATTERY

POLARITY.

When inserting the batteries, be sure to observe proper

polarity (+ and –) as instructed. Rupture or chemical

leakage from the battery may cause fire or personal injury.

KEEP THE VOLUME AT A LEVEL WHERE YOU CAN

STILL HEAR OUTSIDE NOISE WHILE DRIVING.

Failure to do so may result in an accident.

KEEP FINGERS AWAY WHILE THE MOTORIZED

FRONT PANEL OR MOVING MONITOR IS IN

MOTION.

MINIMIZE DISPLAY VIEWING WHILE DRIVING.

Viewing the display may distract the driver from looking

ahead of the vehicle and cause an accident.

Failure to do so may result in personal injury or damage to

the product.

DO NOT DISASSEMBLE OR ALTER.

Doing so may result in an accident, fire or electric shock.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE

GROUND.

PRECAUTIONS

Temperature

(Check with your dealer if you are not sure.) Failure to do

Be sure the temperature inside the vehicle is between

+60°C (+140°F) and –10°C (+14°F) before turning your

unit on.

so may result in fire, etc.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT

OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury. If

Moisture Condensation

You may notice the CD playback sound wavering due to

condensation. If this happens, remove the disc from the

player and wait about an hour for the moisture to

evaporate.

swallowed, consult a physician immediately.

USE THE CORRECT AMPERE RATING WHEN

REPLACING FUSES.

Failure to do so may result in fire or electric shock.

Damaged Disc

Do not attempt to play cracked, warped, or damaged

discs. Playing a bad disc could severely damage the

playback mechanism.

DO NOT BLOCK VENTS OR RADIATOR PANELS.

Doing so may cause heat to build up inside and may result

in fire.

Maintenance

USE THIS PRODUCT FOR MOBILE 12V

If you have problems, do not attempt to repair the unit

yourself. Return it to your Alpine dealer or the nearest

Alpine Service Station for servicing.

APPLICATIONS.

Use for other than its designed application may result in

fire, electric shock or other injury.

DO NOT PLACE HANDS, FINGERS OR FOREIGN

OBJECTS IN INSERTION SLOTS OR GAPS.

Doing so may result in personal injury or damage to the

product.

2-EN

Installation Location

Never Attempt the Following

Make sure the CDA-7977/CDA-7876/CDA-7875/CDA-

7873 will not be installed in a location subjected to:

Do not grip or pull out the disc while it is being pulled

back into the player by the automatic reloading

mechanism.

Do not attempt to insert a disc into the unit when the unit

power is off.

•

Direct sun and heat

High humidity and water

Excessive dust

Excessive vibrations

Correct Handling

Do not drop the disc while handling. Hold the disc so you

will not leave fingerprints on the surface. Do not affix

tape, paper, or gummed labels to the disc. Do not write on

the disc.

Inserting Discs

Your player accepts only one disc at a time for playback.

Do not attempt to load more than one disc.

Make sure the label side is facing up when you insert the

disc. Your player will automatically eject any disc that is

inserted incorrectly. If the player continues to eject a

correctly inserted disc, push the RESET switch with a

pointed object such as a ballpoint pen.

CORRECT

INCORRECT

CORRECT

Playing a disc while driving on a very bumpy road may

result in skips, but this will not scratch the disc or damage

the player.

New Discs

Disc Cleaning

As a protective measure to prevent the CD from jamming,

the CD player will automatically eject discs with irregular

surfaces or inserted incorrectly. When a new disc is

inserted into the player and ejected after initial loading,

using your finger, feel around the inside of the centre hole

and outside edge of the disc. If you feel any small bumps

or irregularities, this could inhibit proper loading of the

disc. To remove the bumps, rub the inside edge of the hole

and outside edge of the disc with a ballpoint pen or other

such instrument, then insert the disc again.

Fingerprints, dust, or soil on the surface of the disc could

cause the CD player to skip. For routine cleaning, wipe

the playing surface with a clean, soft cloth from the centre

of the disc to the outer edge. If the surface is heavily

soiled, dampen a clean, soft cloth in a solution of mild

neutral detergent before cleaning the disc.

Center

Hole

Center

Hole

New

Disc

Disc Accessories

Bumps

There are various accessories available on the market for

protecting the disc surface and improving sound quality.

However, most of them will influence the thickness and/or

diameter of the disc. Using such accessories can cause the

disc to be out of standard specifications and may create

operational problems. We recommend not using these

accessories on discs played in Alpine CD players.

Outside

(Bumps)

Irregular Shaped Discs

Be sure to use round shape discs only for this unit and

never use any special shape discs.

Use of special shape discs may cause damage to the

mechanism.

Transparent Sheet

Disc Stabilizer

3-EN

Basic Operation

POWER

RESET

MUTE

MODE/BBE/

Audio Control

CLK

ANGLE

Detaching the Front Panel

• Controllable with Remote Control (CDA-7873

only)

This unit can be controlled with an optional Alpine

remote control. For details, consult your Alpine

dealer.

Press and hold the POWER button for more than

3 seconds to turn off the power.

Press the

(Release) button at upper left side

Point the optional remote control transmitter at

the remote control sensor.

until the front panel pops out.

Grasp the left side of the front panel and pull it

out.

Remote control sensor

NOTES

• The front panel may become hot in normal usage

(especially the connector terminals on the back of the

front panel.) This is not a malfunction.

• To protect the front panel, place it in the supplied

carrying case.

Initial System Start-Up

Immediately after installing or applying power to the

unit, it should be initialized. Press the RESET switch

with a ballpoint pen or any other pointed object.

Attaching the Front Panel

First, insert the right side of the front panel into

the main unit. Align the groove on the front panel

with the projections on the main unit.

Turning Power On and Off

Press the POWER button to turn on the unit.

Push the left side of the front panel until it locks

firmly into the main unit.

NOTE

The unit can be turned on by pressing any other button

except the eject c and CLK/TITLE button.

The volume level gradually increases to the previous

level you were listening to before the unit was turned

off. Press and hold the POWER button for at least 3

seconds to turn off the unit.

NOTE

Before attaching the front panel, make sure that there is

no dirt or dust on the connector terminals and no foreign

object between the front panel and the main unit.

The first time power is turned on, the volume will start

from level 12 and the unit will be in the tuner mode with

BBE on.

4-EN

Display Angle Adjustment

Selecting BBE Mode

Movable display

The BBE (Barcus Berry Electronics) processor

installed in this unit is designed to correct the

phase distortion inherent in most loudspeaker

designs. Ensuring the phase integrity of the signal

driving the speakers improves the accurate

reproduction of the sound.

The movable display may be adjusted to 3

different angles depending upon user preference.

Press and hold the BBE button for at least 2

seconds to turn on the BBE mode.

Each press toggles between the BBE on and off

modes.

Press the ANGLE 89 button to adjust the angle

of the movable display.

NOTES

In BBE mode, press the BBE knob to select the

BBE adjusting mode.

Each press changes the adjusting mode.

• The display will close a half minute after the ignition

key is turned to the OFF position.

• The adjusted angle of the display is stored in memory.

There is no need to re-adjust the angle when the power

is turned back on.

To change to a desired BBE level, rotate the

MODE (Audio Control) knob.

CAUTION

Keep hands (or any other object) away from the display

while it is opening or closing to avoid damage or injury.

The back of the movable display will get very warm

under normal operating conditions. This is not a

malfunction. Do not touch.

The BBE level can be changed from +1 to +3.

Audio Mute Function

Activating this function will instantly lower the

volume level by 20 dB.

Adjusting Volume/Balance

(Between Left and Right)/Fader

(Between Front and Rear)

Press the MUTE button to activate the MUTE

mode. The audio level will decrease by about

20 dB.

Press the MODE button repeatedly to choose the

desired mode.

Pressing the MUTE button again will bring the

audio back to its previous level.

Each press changes the modes as follows:

→ BALANCE → FADER → VOLUME

Displaying Time

NOTES

Press the CLK (clock) button repeatedly until the

time is displayed.

Each press changes the modes as follows:

• If the MODE button is not pressed within 5 seconds

after selecting the BALANCE or FADER mode, the

unit automatically returns to the VOLUME mode.

• When the subwoofer mode is ON, its level may also be

adjusted.

Radio mode

Clock priority

mode

→

Radio frequency

→

TITLE mode

• When the BBE mode is ON, its level may also be

adjusted.

CD Player/Changer modes

Rotate the Audio Control knob until the desired

sound is obtained in each mode.

DISC TEXT

mode

Playing time

mode

Clock priority

mode

→

NOTE

TRACK

TEXT mode

Depending on the connected devices, some functions and

display indications do not work.

TITLE mode

←

NOTE

Selecting any tuner or CD function while in the clock

priority mode will interrupt the time display

momentarily. The function selected will be displayed for

about 5 seconds before the time returns to the display.

5-EN

Basic Operation

TUNE

MODE/Audio Control

g DN

f UP

CLK

SETUP

Setting Time

Dimmer Control

In the Clock priority mode, press and hold the

CLK (clock) button for at least 3 seconds while

the time is displayed. The time indication will

blink.

Set the DIMMER control to AUTO to decrease the

illumination brightness of the unit with the head

lights of the vehicle ON. This mode is useful if you

feel the unit's backlighting is too bright at night.

Rotate the MODE (Audio Control) knob to adjust

the hours while the time indication is blinking.

Press and hold the SETUP button for at least 3

seconds.

When the hours has been adjusted, press the

MODE (Audio Control) knob.

Press the f UP button repeatedly to select

“DIM”(DIMMER).

Rotate the MODE (Audio Control) knob to adjust

the minutes while the time indication is blinking.

The time is automatically set 5 seconds after the

minute adjustment. The time can also be

manually set by pressing the MODE (Audio

Control) knob.

Each press of the f UP button scrolls the

modes as shown:

→

NORMAL/HI-FI

→

←

AMBER*

SCR

→

MUTE

DIM

→

BEEP

SUB

DEMO AUX

←

∗ CDA-7876 Only

Changing Lighting Color

NOTE

If you press the g DN button the display scrolls in

CDA-7876 only

reverse sequence.

Press the TUNE button to select the Dimmer mode.

Each press toggles between DIM AUTO and DIM

MANU.

Press and hold the SETUP button for at least 3

seconds.

Press the f UP button repeatedly to select

“AMBER”.

Each press of the f UP button changes the

Press the SETUP button to activate the normal

mode.

modes as shown:

Subwoofer On and Off

NOTE

If you press the g DN button the display scrolls in

Press and hold the SETUP button for at least 3

seconds.

reverse sequence.

→

NORMAL/HI-FI

DEMO AUX

∗ CDA-7876 Only

Press the TUNE button to toggle the mode

→

←

AMBER*

→

MUTE

DIM

→

BEEP

SUB

←

SCR

←

Press the f UP button repeatedly to select

“SUB (Subwoofer).”

Each press of the f UP button changes the

modes as shown:

between AMBER ON (amber) and AMBER OFF

(green).

→

NORMAL/HI-FI

→

←

AMBER*

SCR

→

MUTE

DIM

→

BEEP

SUB

DEMO AUX

←

Press the SETUP button to set the selected

mode.

∗ CDA-7876 Only

NOTE

If you press the g DN button the display scrolls in

reverse sequence.

6-EN

Press the f UP button to select the MUTE

mode. Each press changes the modes as shown:

Press the TUNE button to toggle mode between

SUB-W ON and SUBW OFF.

→

NORMAL/HI-FI

→

←

AMBER*

SCR

→

MUTE

DIM

→

BEEP

SUB

Press the SETUP button after setting the SUB-W

ON.

DEMO AUX

←

∗ CDA-7876 Only

NOTE

If you press the g DN button the display scrolls in

reverse sequence.

Press the MODE button repeatedly to select the

SUB-W mode.

→ SUB-W

→ BALANCE

VOLUME ←

FADER ←

Press the TUNE button to turn on or off the

MUTE mode.

Each press toggles between the MUTE ON and

OFF modes.

Press the g DN or f UP button after

selecting the SUB-W mode, and the subwoofer

output phase is toggled SUBW NOR (0°) or

SUBW REV (180°).

NOTE

The initial setting at the factory is “MUTE ON.”

Press the SETUP button again to return to

normal operation.

Rotate Audio Control knob until the desired

sound is obtained in each mode.

CD Text Scroll Setting

Sound (Beep) Guide Function

This CD player has the ability to scroll the disc

and track name recorded on CD-Text discs. The

scrolling feature will work with names greater than

8 characters. This feature will not work for the 8

character titles that were input manually.

This function will give audible feedback with

varying tones depending upon the button

pressed.

Press and hold the SETUP button for at least 3

seconds.

Press and hold the SETUP button for at least 3

seconds.

Press the f UP button repeatedly to select

“BEEP.”

Each press of the f UP button changes the

modes as shown:

Press the f UP button repeatedly to select

“SCR”(SCROLL).

Each press of the f UP button changes the

modes as shown:

NOTE

→

NORMAL/HI-FI

→

←

AMBER*

SCR

→

MUTE

DIM

→

BEEP

SUB

If you press the g DN button the display scrolls in

reverse sequence.

DEMO AUX

←

∗ CDA-7876 Only

→

NORMAL/HI-FI

DEMO AUX

∗ CDA-7876 Only

→

←

AMBER*

SCR

→

MUTE

DIM

→

BEEP

SUB

←

NOTE

If you press the g DN button the display scrolls in

reverse sequence.

Press the TUNE button to toggle the mode

between BEEP ON and BEEP OFF.

Press the TUNE button to toggle mode between

SCR AUTO and MANU.

NOTE

• SCR AUTO: the display of CD text is scrolled

continuously.

• SCR MANU: the display is scrolled only when a

disc is loaded or when a track is changed and the

text information exceeds 8 digits.

The initial setting at the factory is BEEP ON.

Press the SETUP button to set the selected

mode.

When the setting is completed, press the SETUP

button to return to the normal mode.

Turning Mute Mode On/Off

NOTES

If a device having the interrupt feature is

connected, audio will be automatically muted

whenever the interrupt signal is received from the

device. This function can be turned ON or OFF

from the head unit by following procedure below.

• Initial mode is “SCR MANU.”

• The unit scrolls only CD text names. The disc titles

input manually (refer to page 13) cannot be scrolled.

• The display of CD text will scroll even for text less

than 8 characters.

Press and hold the SETUP button for at least 3

seconds.

7-EN

Basic Operation

SOURCE

TUNE

BAND

Audio Control

g DN

f UP

CENTER f

X-OVER

SETUP

To adjust the volume, etc., first press the

SOURCE button and select the AUX mode, then

make the necessary adjustment.

Setting the AUX Mode (V-Link)

You can input TV/video sound by connecting an

NOTE

optional Ai-NET/RCA Interface cable (KCA-121B)

or Versatile Link Terminal (KCA-410C) to this

component.

When using the Versatile Link Terminal (KCA-410C), you

can connect two external inputs. To select the mode,

press the BAND button on the unit.

Demonstration

Press and hold the SETUP button for at least 3

seconds.

This unit has a Demonstration feature which

simulates the display functions.

Press the f UP button repeatedly to select

“AUX.”

Each press of the f UP button changes the

modes as shown:

Press and hold the SETUP button for at least 3

seconds.

NOTE

If you press the g DN button the display scrolls in

Press the f UP button to select the DEMO

mode. Each press changes the modes as shown:

reverse sequence.

→ NORMAL/HI-FI → AMBER∗ → DIM → SUB → BEEP → MUTE

→

NORMAL/HI-FI

→

←

AMBER*

SCR

→

MUTE

DIM

→

BEEP

SUB

DEMO ← AUX (AUX Mode Display Setting∗∗) ← SCR ←

DEMO AUX

←

∗ CDA-7876 Only

∗∗ Displayed after AUX IN ON is set.

∗ CDA-7876 Only

NOTE

If you press the g DN button the display scrolls in

reverse sequence.

Press the TUNE button to toggle the mode

between AUX ON and AUX OFF.

NOTES

Press the TUNE button to turn on or off the

DEMO mode.

Each press toggles between DEMO ON and

DEMO OFF.

• The initial setting at the factory is AUX OFF.

• You can set the AUX mode display by pressing the

g DN or f UP button after AUX ON is set,

select the AUX mode display setting, and then press

the TUNE button.

If no button is pressed for 30 seconds, the

DEMO mode activates.

• When connecting the KCA-410C, you can set two AUX

mode displays.

NOTES

• The initial setting at the factory is “DEMO OFF.”

• To quit DEMO mode, set to “DEMO OFF.”

Press the SETUP button to return to normal

mode.

Press the SETUP button again to return to

normal operation.

8-EN

Setting the Bass Control

2-1Setting the treble Center frequency:

Press g DN or f UP button to select the

desired treble Center frequency.

You can change the Bass Frequency emphasis to

create your own tonal preference.

→ 10kHz ↔ 12.5kHz ↔ 15kHz ↔ 17.5kHz

←

Emphasizes the displayed Treble frequency

ranges.

Press the CENTER f button to select the BASS

(bass Center frequency) control mode.

→ BASS → TREBLE → OFF

2-2

Setting the treble Level:

Rotate the Audio Control knob to select the

desired Treble Level (–7~+7).

2-1

Setting the bass Center frequency:

Press the g DN or f UP button to select

the desired bass center frequency.

You can emphasize the treble frequency.

NOTES

→ 60Hz ↔ 70Hz ↔ 80Hz ↔ 90Hz

→ 180Hz ↔ 150Hz ↔ 130Hz ↔ 100Hz

←

•If no buttons are pressed within 5 seconds, the Treble

control setting will be turned off automatically.

•The settings of the Bass and Treble will be individually

memorized for each source (FM, AM, XM and CD) until

the setting is changed. Depending on the connected

devices, some functions and display indications do not

work.

Emphasizes the displayed Bass frequency ranges.

2-2

Setting the bass Band Width (Q-Factor):

Press the BAND button to select the desired

bass Band Width.

Adjusting the built-in Crossover

→ B. Width1 → B. Width2 → B. Width3 → B. Width4

(Wide) ..................................... (Narrow)

←

→

You can change High Pass Filter and Low Pass

Filter on this unit, so that you can create your

favorite sound effects.

Changes the bass boost band width to wide or

narrow. A wide setting will boost a wide range of

frequencies above and below the center

frequency. A narrower setting will boost only

frequencies near the center frequency.

Press the X-OVER button repeatedly to select

the desired parameter.

2-3

Setting the bass Level:

→ HPF

→ LPF∗ → OFF

Rotate the Audio Control knob to select the

desired bass Level (–7~+7).

You can emphasize or weaken the bass

frequency.

∗ When the subwoofer is turned OFF by using

this unit, LPF and phase are deactivated.

Press the g DN or f UP button to select

the desired setting.

NOTES

• If no buttons are pressed within 5 seconds, the Bass

control setting will be turned off automatically.

• The settings of the Bass and Treble will be individually

memorized for each source (FM, AM, XM and CD) until

the setting is changed. Depending on the connected

devices, some functions and display indications do not

work.

1. HPF (Setting the High Pass Filter):

OFF ↔ 80Hz ↔ 120Hz ↔160Hz

Outputs all frequencies higher than that selected

according to your preference.

2. LPF(Setting the Low Pass Filter):

Setting the Treble Control

OFF ↔ 80Hz ↔ 120Hz ↔160Hz

Outputs all frequencies lower than that selected

according to your preference.

(Only available when using the subwoofer output

from this unit.)

You can change the Treble Frequency emphasis

to create your own tonal preference.

NOTES

Press the CENTER f button to select the

TREBLE (treble Center frequency) control mode.

→ BASS → TREBLE → OFF

• If the battery is disconnected, all settings return to

factory default.

• If no buttons are pressed within 5 seconds, the setup

menu returns to the normal audio display.

9-EN

Basic Operation

DISP/B.OUT

BAND

g DN

f UP

B-FWD/DEFEAT

SETUP

Setting Bass Forward

Switching the Tuner Mode

The Bass Forward function shifts the low

The CDA-7977/CDA-7876/CDA-7875/CDA-7873

incorporates the MAX TUNE SQ for the highest

quality tuner audio. Moreover, you can choose

between two settings to suit your own personal

sound preferences and usage.

frequency's energy component to the front.This

moves the high energy, dynamic bass sound to

the front sound stage.

Press the B-FWD button to activate the Bass

Forward setting mode.

Press and hold the SETUP button for at least 3

seconds.

Press the g DN button or f UP button to

select the Bass Forward level.

Press the f UP button repeatedly to select

"NORMAL or HI-FI." Each press of the f UP

button changes the modes as shown:

OFF ←→ 1 ←→ 2 ←→ 3

....

(Less ← → More)

→

NORMAL/HI-FI

→

AMBER*

→

DIM

→

SUB

NOTE

DEMO AUX

←

SCR

←

MUTE

←BEEP

←

If no buttons are pressed within 5 seconds, the setup

menu returns to the normal audio display.

∗ CDA-7876 Only

NOTE

If you press the g DN button the display scrolls in

reverse sequence.

Defeat

Press the TUNE button to switch the TUNER

mode.

HI-FI ←→ NORMAL

By setting Defeat ON, all previously adjusted

settings will return to the factory defaults.

Press the DEFEAT button for more than 3

seconds to turn Defeat on.

NORMAL: Standard setting

HI-FI: Sound quality priority setting

NOTES

To cancel Defeat, press the DEFEAT button

again for more than 3 seconds.

• The initial setting at the factory is "NORMAL."

• If you find the sound is very noisy while listening to

the tuner in the HI-FI mode, we recommend you

change to the NORMAL mode.

When the setting is completed, press the SETUP

button to return to the normal mode.

10-EN

Blackout Mode On and Off

Changing the Audio Level Display

Pattern

CDA-7977 only

CDA-7875/CDA-7873 only

When the Blackout mode is turned on, the display

will turn off to reduce power consumption.

You can select the Audio Level Display from three

display patterns.You can also deactivate the

display.

This additional power enhances the sound quality.

Press and hold the B.OUT button for at least 3

seconds to start the blackout mode. By doing so

the display will turn off.

Press DISP button to switch the display pattern.

NOTE

→ Pattern1 → Pattern2 → Pattern3 → OFF

If any button on the unit is pressed during the blackout

mode, the function will be displayed for 5 seconds to

show the operation before returning to Blackout mode.

To cancel the blackout mode, press and hold the

B.OUT button for at least 3 seconds.

Switching the Display Modes

CDA-7977/CDA-7876 only

You can select the display pattern mode from

three display patterns.You can also deactivate the

display.

Press the DISP (DISPLAY) button to select the

desired Display pattern mode.

Each press changes the display patterns.

→ Pattern1 → Pattern2 → Pattern3 → Display OFF

11-EN

Basic Operation

:/J

T.S.M.

Audio Control

g DN

f UP TITLE

CD/Changer mode:

Displaying the Title/Text

↓

ELAPSED TIME DISPLAY

It is possible to display the CD/Station title if the

title has been previously inputted. For details, see

Titling Disc/Stations (page 13). Text information,

such as the disc name and the track name, will be

displayed if playing a CD text compatible disc.

↓

CLOCK DISPLAY

↓

TEXT DISPLAY (DISC NAME)^∗1

↓

TEXT DISPLAY (TRACK NAME)^∗1

↓

TITLE DISPLAY^∗2

Press the TITLE button.

The mode will change every time the button is

pressed.

∗1

Displayed during playback of a disc with CD

Text. “NO TEXT” will be displayed when the

CD contains no Text data.

About “Title” and “Text”

Title: With this device, it is possible to input the CD/

Station name (refer to page 13). This inputted

name is referred to as a “title.”

Text: Text compatible CDs contain text information

such as the disc name and track name. Such

text information is referred to as “text.”

∗2

“--------” will be displayed when the title has

not been inputted.

NOTES

• Some characters may not be displayed correctly with

this device, depending on the character type.

• The CD changer must also be CD Text compatible for

the Text information to be displayed.

• When the CD Text Scroll Setting (refer to page 7) is set

to “SCR MANU”, press and hold the TITLE button for

more than 3 seconds to scroll the Text information only

once (TEXT DISPLAY mode only).

Radio mode:

↓

FREQUENCY DISPLAY

↓

CLOCK DISPLAY

↓

TITLE DISPLAY^∗2

12-EN

Titling Discs/Stations

Searching for Titled Discs/Titled

Stations

It is possible to title your favorite CD's or radio

stations.

If a CD/Station is titled, you can do a search for it.

(To title CDs or stations, refer to “Titling Discs/

Stations” on this page.)

Press the TITLE button and select the title

display mode.

For details, see Displaying the Title/Text (page

12).

When the unit is in radio or CD Changer mode,

press and hold the T.S.M. button for at least 2

seconds. The title blinks in the display.

Press and hold the TITLE button for at least 3

seconds. The first character will blink.

Press the g DN or f UP button to select

the desired disc title from the CD changer, or the

desired station title.

Rotate the Audio Control knob to select the

desired letter/numeral/symbol available for

naming. (“A” for example).

Press the T.S.M. button to play the selected disc

or station.

The unit will automatically search for the disc or

station and begin play.

Press the Audio Control button to store the first

character. The first character will stop blinking

and the display will automatically advance to the

next character. When that character begins to

blink, you may choose the next letter or symbol

of your title.

NOTE

This function cannot be performed when using a multi-

changer switching device.

Repeat the steps 3 and 4 above to complete the

titling. Pressing the Audio Control button after

entering the 8th character, automatically stores

the title into memory.

Erasing Disc Title/Station Title

Press the TITLE button to select the titling mode.

Then, press and hold for at least 3 seconds.

When entering a title of less than 8 characters

(for example, 3 character title):

After entering 3 characters to complete your title,

the 4th character space will be blinking. Go to

step 6 to complete the title.

Press and hold the -/J button for at least 2

seconds to activate the title scanning mode. The

title in the display will blink.

Press the g DN or f UP button repeatedly

until the title you want to erase is displayed.

Press and hold the TITLE button for at least 3

seconds to record the title.

Press and hold the -/J button for at least 2

seconds to erase the title displayed.

NOTES

• You can enter 24 radio station titles and 18 CD titles

on this unit. If you try to store beyond the limit, the

display will show “FULL DATA.” At this point, no

more titles can be stored.

Press and hold the TITLE button for at least 3

seconds to cancel the title erasing mode.

NOTE

• The CD Changer title length or memory capacity

varies depending upon the model being used.

• To input a new title, one of the previously inputted

titles must first be deleted.

You cannot erase CD-TEXT.

• When you want to erase a title, enter the “ ” symbol

into all spaces.

• The operations described in steps 3 to 5 must be made

within 10 seconds. The input mode will be cancelled if

no action is taken for over 10 seconds.

• Removing power from the unit may delete these titles.

Use caution when manipulating the power cord.

13-EN

Radio Operation

SOURCE

TUNE/A.ME

BAND Preset buttons (1 throgh 6)

g DN

f UP

Manual Tuning

Automatic Seek Tuning

Press the SOURCE button until a radio

frequency appears in the display.

Press the SOURCE button until a radio

frequency appears in the display.

Press the BAND button repeatedly until the

desired radio band is displayed.

Press the BAND button repeatedly until the

desired radio band is displayed.

Each press changes the band:

→ FM1 → FM2 → AM

Press the TUNE button to illuminate the DX and

SEEK indicators in the display.

With the DX (Distance) mode activated, both

strong and weak stations will be tuned in the

Auto-Seek operation.

Press again to return to the local mode. The DX

indicator will turn off and the SEEK indicator will

remain illuminated. Now, only strong stations will

be tuned.

Press the TUNE button repeatedly until “DX

SEEK” and “SEEK” disappear from the display.

NOTE

The initial mode is DX SEEK.

Press the g DN or f UP button to move

downward or upward one step respectively until

the desired station frequency is displayed.

NOTE

The ST indicator appears on the display when a Stereo

FM station is tuned in.

Press the g DN or f UP button to

automatically seek for a station downward or

upward respectively.

The unit will stop at the next station it finds.

Press the same button again to seek the next

station.

14-EN

Manual Storing of Station Presets

Tuning to Preset Stations

Select the radio band and tune in a desired radio

station you wish to store in the preset memory.

Press the SOURCE button to select the radio

mode.

Press and hold any one of the Preset buttons

(1 through 6) for at least 2 seconds until the

station frequency on the display blinks.

Press the BAND button repeatedly until the

desired band is displayed.

Press the station Preset button that has your

desired radio station in memory.

The display shows the band, preset number with

a triangle and frequency of the station selected.

Press the Preset button into which you wish to

store the station while the frequency display is

blinking (within 5 seconds).

The display stops blinking once the station has

been memorized. The display shows the band,

preset No. with a triangle (9) and station

frequency memorized.

Repeat the procedure to store up to 5 other

stations onto the same band.

To use this procedure for other bands, simply

select the band desired and repeat the

procedure.

A total of 18 stations can be stored in the preset

memory (6 stations for each band; FM1, FM2

and AM).

NOTE

If you store a station in a preset memory which already

has a station, the current station will be cleared and

replaced with the new station.

Automatic Memory of Station

Presets

Press the SOURCE button to select the radio

mode.

Press the BAND button repeatedly until the

desired radio band is displayed.

Press and hold the A. ME button for at least 2

seconds.

The frequency on the display continues to

change while the automatic memory is in

progress. The tuner will automatically seek and

store 6 strong stations in the selected band.

They will be stored into buttons 1 to 6 in order of

signal strength.

When the automatic memory has been

completed, the tuner goes to the station stored in

the preset location No. 1.

NOTE

If no stations are stored, the tuner will return to the

original station you were listening to before the auto

memory procedure began.

15-EN

CD Player Operation

SOURCE

-/J

g DN

f UP

M.I.X.

REPEAT

SCAN

Opening and Closing the Movable

display

Playback

Press the c button.

The movable display will open.

Press the c button.

The movable display will open.

Insert a disc with the label side facing up.

The disc will be pulled into the unit automatically.

The movable display will close and playback will

begin.

To close the movable display, press the c button

again.

The movable display will close.

When a disc is already inserted, press the

SOURCE button to switch to the CD mode.

The mode will change every time the button is

NOTES

• Do not apply shock to the movable display when it is

open as it may result in malfunction of the unit.

• The display may be dim during low temperatures and

immediately after turning on the power. The brightness

will return to normal as time elapses.

pressed.

→ TUNER → CD → CD CHANGER∗

• The display will stop at the set angle when closing.

(∗ Only when the CD changer is connected)

CAUTION

To pause playback, press the -/J button.

Pressing the -/J button again will resume

playback.

Keep hands (or any other object) away from the display

while it is opening or closing to avoid damage or injury.

The back of the movable display will get very warm

under normal operating conditions. This is not a

malfunction. Do not touch.

To eject the disc, press the c button.

NOTES

• If the CD does not eject, press c button again for

more than 3 seconds with the movable display open.

• Only compact discs containing the mark shown can be

used.

• We cannot fully guarantee the playback of CD-R (CD-

Recordable). You cannot playback CD-RW (CD-

ReWritable) on this unit.

16-EN

Music Sensor (Skip)

M.I.X. (Random Play)

Momentarily press the g DN button once

during CD play to return to the beginning of the

current track. If you wish to access the beginning

of a track further back, repeatedly press until

you reach the desired track.

Press the M.I.X. button in the play or pause mode.

The tracks on the disc will be played back in a

random sequence. After all the tracks on the disc

have been played back once, the player will

begin a new random sequence play until the

M.I.X. mode is cancelled.

Press the f UP button once to advance to

the beginning of the next track. If you wish to

access the beginning of a track further ahead,

press repeatedly until the desired track is

reached.

To cancel M.I.X. play, press the M.I.X. button

again to turn off the M.I.X.

NOTES

• If a CD Changer equipped with the ALL M.I.X. function

is connected, ALL M.I.X. will also be selectable.

In this mode, the tracks on all the CDs in the current

magazine will be included in the random playback

sequence.

NOTE

The music sensor feature is functional in the play or

pause mode.

→ M.I.X. → ALL M.I.X. → (off)

Fast Forward and Backward

• In case a 6-disc CD changer is connected:

In CD changer mode, press the “F” button to illuminate

Press and hold the g DN or f UP button

to quickly move backward or forward until you

reach the desired section of the track.

the

indicator and go to step 1 within 5 seconds.

• In case a 12-disc CD changer is connected:

In CD changer mode, press the “F” button twice to

illuminate the

5 seconds.

indicator and go to step 1 within

Repeat Play

Press the REPEAT button to play back

repeatedly the track being played.

The track will be played repeatedly.

Scanning Programs

Press the SCAN button to activate the Scan

mode.

Press the REPEAT button again and select OFF

to deactivate the repeat play.

The first 10 seconds of each track will be played

back in succession.

NOTES

• If a CD Changer is connected and the RPT ALL mode

is selected, the unit repeatedly plays back all tracks on

the disc selected.

To stop scanning, press the SCAN button and

deactivate the Scan mode.

→ RPT → RPT ALL → (off)

NOTES

• In case a 6-disc CD changer is connected:

In CD changer mode, press the “F” button to illuminate

• In case a 6-disc CD changer is connected:

In CD changer mode, press the “F” button to illuminate

indicator and go to step 1 within 5 seconds.

• In case a 12-disc CD changer is connected:

In changer mode, press the “F” button twice to

the

indicator and go to step 1 within 5 seconds.

• In case a 12-disc CD changer is connected:

In CD changer mode, press the “F” button twice to

illuminate the

5 seconds.

the

indicator and go to step 1 within

illuminate the

5 seconds.

indicator and go to step 1 within

17-EN

CD Player Operation

SOURCE

BAND

Select buttons (1 through 6)

Press the Disc Select buttons (1 through 6)

Controlling CD Changer (Optional)

corresponding to one of the discs loaded in the

CD Changer. The selected disc number appears

in the display and CD playback starts.

An optional 6-disc or 12-disc CD Changer may be

connected to the CDA-7977/CDA-7876/CDA-

7875/CDA-7873 if it is Ai-NET compatible. With a

CD Changer connected to the Ai-NET input of the

CDA-7977/CDA-7876/CDA-7875/CDA-7873, the

CD Changer will be controllable from the CDA-

7977/CDA-7876/CDA-7875/CDA-7873.

Using the KCA-400C (Multi-Changer Switching

device) or the KCA-410C (Versatile Link Terminal)

multiple changers can be controlled by the CDA-

7977/CDA-7876/CDA-7875/CDA-7873.

NOTES

• After selecting the desired disc, you can operate in the

same way as for the CDA-7977/CDA-7876/CDA-7875/

CDA-7873 CD player.

For details, please see the CD Operation section.

• If the

indicator is illuminated the Disc Select

buttons become nonfunctional.

When a 12-disc CD Changer is connected:

To select discs numbered from 1 to 6, the

procedure is the same as for the 6-disc CD

Changer. To select discs numbered from 7 to 12,

first press the “F” button. This changes the “D”

indicator to “d.” Then press the desired Preset

button. With the “F” button activated, the Preset

buttons 1 to 6 will represent discs 7 to 12

respectively.

See the Multi-Changer Selection section on page

19 for selecting the CD Changers.

NOTES

• The controls on the CDA-7977/CDA-7876/CDA-7875/

CDA-7873 for CD Changer operation are operative only

when a CD Changer is connected.

• The “Changer” indicator illuminates in the CD Changer

mode.

• The DVD changer (optional) is controllable from the

CDA-7977/CDA-7876/CDA-7875/CDA-7873 as well as

the CD changer.

Press the SOURCE button to activate the

CHANGER mode. The display shows the

“Changer,” disc number and track number.

NOTE

The source indicator varies depending on the connected

source.

18-EN

Multi-Changer Selection

Alpine's Ai-NET system will support up to 6 CD

Changers. When operating two or more changers,

the KCA-400C (Multi-Changer Switching device)

must be used. If you use 1 Switching device, you

can connect up to 4 CD Changers. If you use 2

Switching devices, you can connect up to 6 CD

Changers. When using KCA-410C (Versatile Link

Terminal), you can connect two changers and two

external outputs (AUX).

Press the SOURCE button on the CDA-7977/

CDA-7876/CDA-7875/CDA-7873 to activate the

CD Changer mode.

Alternatively, press the SOURCE button on the

Remote Control (RUE-4187) to activate the CD

Changer mode. Proceed to step 3 below to

select the desired CD Changer.

SOURCE

BAND

Press the BAND button on the CDA-7977/CDA-

7876/CDA-7875/CDA-7873 or the RUE-4187 to

activate the CD Changer Selection mode.

The CD Changer Selection mode remains active

for 3 seconds after step 2 is performed. Press

the BAND button until the desired CD Changer

indicator appears on the display.

NOTE

If the selected CD Changer is not connected, the display

will show “NO CHGR .”

Alternatively press the BAND button on the

Remote Control until the desired changer

indicator appears on the display.

To operate the selected changer, see “CD Player

Operation” section.

NOTE

For further details about the external input (AUX) when

using KCA-410C, see ”Setting the AUX Mode (V-Link)"

on page 8.

19-EN

XM Radio Operation

SOURCE

TUNE

BAND

Preset buttons (1 through 6)

g DN

f UP

SETUP

Press the SOURCE button to select RADIO

Mode.

Receiving XM Channels with the

XM Receiver (Optional)

Press the BAND button to select XM1 or XM2.

Each press changes the band:

XM Satellite Radio* is the next generation of

audio entertainment, with up to 100 brand-new

digital channels. For a small monthly fee,

subscribers can hear crystal-clear music, sports,

news and talk, coast-to-coast via satellite. For

more information, visit XM’s website at

→ FM1 → FM2 → XM1 → XM2 → AM

Press the g DN or f UP button to select

the desired channel. Holding the g DN or

f UP buttons will change channels

continuously.

www.xmradio.com or call 1-877-XMRADIO.

An optional XM Satellite Radio Receiver (TUA-

T020XM) may be connected to the CDA-7977/

CDA-7876/CDA-7875/CDA-7873 if it is Ai-NET

compatible. With an XM Receiver connected to

the Ai-NET input of the CDA-7977/CDA-7876/

CDA-7875/CDA-7873, the XM Receiver will be

controllable from the CDA-7977/CDA-7876/CDA-

7875/CDA-7873.

* XM and its corresponding logos are trademarks

of XM Satellite Radio Inc.

NOTES

• The controls on the CDA-7977/CDA-7876/CDA-7875/

CDA-7873 for XM Receiver operation are operative

only when an XM Receiver is connected.

• The XM1 or XM2 band illuminates when in XM mode.

20-EN

Checking the XM Radio ID Number

Storing XM Channel Presets

Press the BAND button to select the desired

band (XM1 or XM2) you want to store.

You need to provide XM with the unique XM

Radio ID number for your XM Radio Receiver in

order to subscribe to XM's programming.

After tuning in the desired channel, press and

hold any one of the Preset buttons (1 through

6) for at least 2 seconds until the channel number

on the display blinks.

This number is an 8 character alphanumeric

number that is printed on a label directly on the

XM Receiver.

It can also be displayed on the screen of the CDA-

7977/CDA-7876/CDA-7875/CDA-7873 in the

following way.

Press the Preset button into which you wish to

store the channel while the channel number

display is blinking (within 5 seconds).

The display stops blinking once the channel has

been memorized. The display shows the band,

preset No. with a triangle (9) and channel

number memorized.

While receiving XM1/XM2, press the g DN or

f UP button to select channel “0.”

The unit alternately displays “RADIO ID” for 2

seconds, then the ID number for 10 seconds.

Repeat the procedure to store up to 5 other

channels onto the same band.

To use this procedure for other bands, simply

select the band desired and repeat the

procedure.

A total of 12 channels can be stored in the preset

memory (6 channels for each band; XM1 and

XM2).

To cancel the ID number display, set the channel

to other than “0.”

NOTE

There is another way to display your ID number.

1. Press and hold the SETUP button for at least 3

seconds.

NOTE

2. Press the f UP button repeatedly to select “ID.”

If you store a channel in a preset memory which already

has a station, the current channel will be cleared and

replaced with the new one.

Each press of the f UP button changes the modes

as shown:

→

NORMAL/HI-FI

→

AMBER*

SCR

→

←

DIM

MUTE

→

←

SUB

BEEP

Receiving Stored XM Channels

←

DEMO AUX

←

Press the BAND button to select the desired

band (XM1 or XM2).

* CDA-7876 only

If you press the g DN button the display scrolls in

reverse sequence.

→ FM1 → FM2 → XM1 → XM2 → AM

3. Press the TUNE button to display your ID number.

Press the channel Preset button that has your

desired satellite channel in memory.

4. After checking your ID number, press the SETUP

button to return to the normal display.

21-EN

XM Radio Operation

CAT

g DN

f UP

TITLE

Category Search

Changing the Display

Category Search functionality allows you to

search for a specific channel by the category of

programming it offers, or to surf within a given

category.

Text information, such as the channel name, artist

name/feature, and song/program title, is available

with each XM channel. The unit can display this

text information as explained below.

In XM mode, press the CAT button to display the

category of the channel that is currently selected

for 5 seconds.

In XM mode, press the TITLE button.

Each time you press this button, the display

changes as shown below.

Channel Number

display

CLOCK

display

Channel Name

display

While the category is displayed, press the

g DN or f UP button to select a different

category (or leave it to stay with the same

category.)

→

Song Title

display

Artist Name

display

←

NOTES

Within 5 seconds of selecting the category, press

the CAT button again to select the next channel

within that category. Repeatedly press the CAT

button within 5 seconds to select additional

channels within that category.

• When The “CD Text Scroll Setting” (refer to page 7) is

set to “SCR AUTO”, the display scrolls.

When the CD Text Scroll Setting is set to “SCR

MANU”, the display scrolls only when you operate the

unit (POWER ON, BAND, etc., are displayed.)

Press the TITLE button for more than 3 seconds to

scroll the display again.

When tuned in, the category is displayed for 5

seconds, then the display returns to normal

mode.

• “Channel Number” and “Clock” displays do not

scroll.

NOTE

If you cannot find your desired category, the display

shows “

----” for 5 seconds automatically.

22-EN

Remote Control Operation

8 g DN Button

Controls on Remote Control

Radio mode: SEEK (DN) Button

CD mode: Press the button to go back to the

beginning of the current track.

CDA-7977/CDA-7876/CDA-7875 only

NOTE

9 f UP Button

Although the remote control is not supplied with the

CDA-7873, you can use it, if purchased separately.

Radio mode: SEEK (UP) Button

CD mode: Press the button to advance to the

beginning of the next track.

1 Power Button

Press the button to turn the power on/off.

! 9 Button

2 Source Button

Radio mode: Pressing the button will select, in

descending order, stations programmed into the

radio's presets as shown below.

Press to select the audio source.

3 -/J Button

Press the button to switch between the Play and

Pause modes for CD.

→ 6 → 5 ... 1

4 ANGLE 89 Buttons

Press the button to adjust the angle of the

movable display.

CD Changer mode: DISC Select (DN) Button

Press the button to select a disc in descending

order.

5 Band/Program Button

Radio mode: BAND Button

Press the button and the band will change as

shown below.

" Mute Button

Press the button to lower the volume by 20 dB

instantly. Press the button again to cancel.

# Audio Processor Button∗∗

Press the button to call the external audio

processor mode.∗

→ FM1 → FM2 → XM1 → XM2 → AM

6 Volume Adjustment Buttons

To increase the volume level:

Press the L button

∗

For the operation of external audio processor, refer to the

Owner's Manual of the external audio processor you

purchased.

To decrease the volume level:

Press the K button

∗∗ This button is used in conjunction with an optional Ai-

NET processor.

7 8 Button

Radio mode: Pressing the button will select, in

ascending order, stations programmed into the

radio's presets as shown below.

→ 1 → 2 ... 6

CD Changer mode: DISC Select (UP) Button

Press the button to select a disc in ascending order.

23-EN

Battery Replacement

CDA-7977/CDA-7876/CDA-7875 only

Applicable battery: Use two “AAA” sized dry

batteries or equivalent.

Opening the battery cover

Slide out the battery cover while firmly pressing

the direction of arrow.

Replacing the battery

Put the batteries in the case observing the

polarities as illustrated.

Closing the cover

Push the cover as illustrated until a click is

heard.

24-EN

Information

In Case of Difficulty

CD Player/Changer not functioning.

• Out of operating temperature range +50˚C (+120˚F) for

CD.

- Allow the vehicle's interior (or trunk) temperature to

cool.

CD playback sound is wavering.

• Moisture condensation in the CD Module.

- Allow enough time for the condensation to evaporate

(about 1 hour).

If you encounter a problem, please review the items in

the following checklist. This guide will help you

isolate the problem if the unit is at fault. Otherwise,

make sure the rest of your system is properly

connected or consult your authorized Alpine dealer.

Basic

No function or display.

CD insertion not possible.

• A CD is already in the CD player.

- Eject the CD and remove it.

• Vehicle's ignition is off.

- If connected following instructions, the unit will not

operate with the vehicle's ignition off.

• Improper power lead connections.

- Check power lead connections.

• Blown fuse.

• The CD is being improperly inserted.

- Make sure the CD is being inserted following

instructions in the CD Player Operation section.

Unable to fast forward or backward the CD.

• The CD has been damaged.

- Check the fuse on the battery lead of the unit; replace

with the proper value if necessary.

• Internal micro-computer malfunctioned due to

interference noise etc.

- Eject the CD and discard it; using a damaged CD in

your unit can cause damage to the mechanism.

CD playback sound skips due to vibration.

• Improper mounting of the unit.

- Press the RESET switch with a ballpoint pen or other

pointed article.

- Securely re-mount the unit.

• Disc is very dirty.

- Clean the disc.

• Disc has scratches.

- Change the disc.

Radio

• The pick-up lens is dirty.

Unable to receive stations.

- Do not use a commercial available lens cleaner disc.

Consult your nearest ALPINE dealer.

CD playback sound skips without vibration.

• Dirty or scratched disc.

- Clean the disc; damaged disc should be replaced.

Error displays (built-in CD player only)

• Mechanical error

- Press the c button. After the error indication

disappears, insert the disc again. If the above-

mentioned solution does not solve the problem,

consult your nearest ALPINE dealer.

• No antenna or open connection in cable.

- Make sure the antenna is properly connected;

replace the antenna or cable if necessary.

Unable to tune stations in the seek mode.

• You are in a weak signal area.

- Make sure the tuner is in the DX mode.

• If the area you are in is a primary signal area, the

antenna may not be grounded and connected properly.

- Check your antenna connections; make sure the

antenna is properly grounded at its mounting location.

• The antenna may not be the proper length.

- Make sure the antenna is fully extended; if broken,

replace the antenna with a new one.

Broadcast is noisy.

• The antenna is not the proper length.

- Extend the antenna fully; replace it if it is broken.

• The antenna is poorly grounded.

- Make sure the antenna is grounded properly at its

mounting location.

25-EN

Indication for CD Player

HI TEMP

Indication for CD Changer

HI TEMP

• Protective circuit is activated due to high temperature.

- The indicator will disappear when the temperature

returns to within operation range.

• Protective circuit is activated due to high temperature.

- The indicator will disappear when the temperature

returns to within operation range.

ERROR - 01

T– – – – –

• No CD is inserted.

- Insert a CD.

• Although a disc is inserted, “T

• Malfunction in the CD Changer.

- Consult your Alpine dealer. Press the magazine eject

button and pull out the magazine.

-- ---” is displayed

and the unit does not start to play or eject the disc.

- Remove the disc by following these steps:

1) Press the c button.

Check the indication. Insert the magazine again.

If the magazine cannot be pulled out, consult your

Alpine dealer.

The movable display will open.

• Magazine ejection not possible.

2) Press the c button again for at least 3 seconds while

the movable display is open.

- Press the magazine eject button. If the magazine does

not eject, consult your Alpine dealer.

ERROR

ERROR - 02

• Mechanism error.

• A disc is left inside the CD Changer.

1)Press the c button and eject the CD.

If not ejecting, consult your Alpine dealer.

2)When the error indication remains after ejecting,

press the c button again.

- Press the Eject button to activate the eject function.

When the CD Changer finishes the eject function,

insert an empty CD magazine into the CD Changer to

receive the disc left inside the CD Changer.

If the error indication still does not turn off after

pressing the c button for a few times, consult your

Alpine dealer.

NO MAGZN

• No magazine is loaded into the CD Changer.

- Insert a magazine.

NOTE

When the “ERROR” is displayed:

In case that the disc cannot be ejected by pressing the c

button, press the RESET switch (refer to page 4) and

press the c button again.

NO DISC

If not ejecting, consult your Alpine dealer.

• No indicated disc.

- Choose another disc.

26-EN

Indication for XM Radio Mode

ANTENNA

Specifications

FM TUNER SECTION

Tuning Range

87.7 – 107.9 MHz

Mono Usable Sensitivity

50 dB Quieting Sensitivity

Alternate Channel Selectivity 80 dB

Signal-to-Noise Ratio

Stereo Separation

Capture Ratio

9.3 dBf (0.8 µV/75 ohms)

13.5 dBf (1.3 µV/75 ohms)

• The XM antenna is not connected to the XM radio

module.

- Check whether the XM antenna cable is attached

securely to the XM radio module.

80 dB

45 dB

2.0 dB

UPDATING

AM TUNER SECTION

Tuning Range

Sensitivity (IEC Standard)

• Radio is being updated with latest encryption code.

- Wait until encryption code is being updated. Channels

0 and 1 should function normally.

530 – 1,710 kHz

22.5 µV/27 dB

CD PLAYER SECTION

Frequency Response

5 – 20,000 Hz ( 1 dB)

NO SIGNL

Wow & Flutter (% WRMS) Below measurable limits

Total Harmonic Distortion

Dynamic Range

Signal-to-Noise Ratio

Channel Separation

0.008% (at 1 kHz)

95 dB (at 1 kHz)

105 dB

• XM signal is too weak at the current location.

- Wait until the car reaches a location with a stronger

signal.

85 dB (at 1 kHz)

REMOTE CONTROL (CDA-7977/CDA-7876/CDA-

7875 only)

Battery Type

Width

Height

Depth

AAA batteries (2 pcs.)

42 mm (1-21/32")

121 mm (4-25/32")

23 mm (29/32")

• Radio is acquiring audio or program information.

- Wait until the radio has received the information.

Weight

50 g (1.8 oz)

OFF AIR

GENERAL

Power Requirement

• The channel currently selected has stopped

broadcasting.

14.4 V DC

(11–16 V allowable)

60 W × 4 (CDA-7876/CDA-

7875/CDA-7873 only)

- Select another channel.

Maximum Power Output

– – – –

Maximum Pre-Output Voltage 5 V/10 k ohms (CDA-7977

only)

2V/10k ohms (CDA-7876/

CDA-7875/CDA-7873 only)

Maximum Subwoofer Output

• The user has selected a Channel Number that does not

exist or is not subscribed to.

- The unit will revert back to the previously selected

channel.

• There is no artist name/feature, song/program title, or

additional information associated with the channel at

that time.

Voltage

4 V/10 k ohms (CDA-7876/

CDA-7875/CDA-7873

only)

2V/10k ohms (CDA-7876/

CDA-7875/CDA-7873 only)

1.5 kg (3 lbs. 5 oz)

- No action needed.

Weight

CHASSIS SIZE

Width

Height

178 mm (7")

50 mm (2")

Depth

155 mm (6-1/8")

NOSEPIECE SIZE

Width

Height

Depth

170 mm (6-11/16")

46 mm (1-13/16")

24 mm (15/16")

Due to continuous product improvement, specifications and

design are subject to change without notice.

27-EN

Installation and Connections

Before installing or connecting the unit, please

Caution

read the following and pages 2 and 3 of this

manual thoroughly for proper use.

HAVE THE WIRING AND INSTALLATION DONE BY

EXPERTS.

The wiring and installation of this unit requires special

technical skill and experience. To ensure safety, always

contact the dealer where you purchased this product to

have the work done.

Warning

MAKE THE CORRECT CONNECTIONS.

Failure to make the proper connections may result in fire

or product damage.

USE SPECIFIED ACCESSORY PARTS AND INSTALL

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE

THEM SECURELY.

Be sure to use only the specified accessory parts. Use of

other than designated parts may damage this unit internally

or may not securely install the unit in place. This may cause

parts to become loose resulting in hazards or product failure.

GROUND.

(Check with your dealer if you are not sure.) Failure to do

so may result in fire, etc.

BEFORE WIRING, DISCONNECT THE CABLE FROM

THE NEGATIVE BATTERY TERMINAL.

Failure to do so may result in electric shock or injury due

to electrical shorts.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR

PINCHED BY A SHARP METAL EDGE.

Route the cables and wiring away from moving parts (like

the seat rails) or sharp or pointed edges. This will prevent

crimping and damage to the wiring. If wiring passes through

a hole in metal, use a rubber grommet to prevent the wire’s

insulation from being cut by the metal edge of the hole.

DO NOT ALLOW CABLES TO BECOME ENTANGLED

IN SURROUNDING OBJECTS.

Arrange wiring and cables in compliance with the manual

to prevent obstructions when driving. Cables or wiring

that obstruct or hang up on places such as the steering

wheel, gear lever, brake pedals, etc. can be extremely

hazardous.

DO NOT INSTALL IN LOCATIONS WITH HIGH

MOISTURE OR DUST.

Avoid installing the unit in locations with high incidence

of moisture or dust. Moisture or dust that penetrates into

this unit may result in product failure.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other

equipment. Doing so will exceed the current carrying

capacity of the wire and result in fire or electric shock.

Precautions

• Be sure to disconnect the cable from the (–) battery post before

installing your CDA-7977/CDA-7876/CDA-7875/CDA-7873.

This will reduce any chance of damage to the unit in case of a

short-circuit.

DO NOT DAMAGE PIPE OR WIRING WHEN

DRILLING HOLES.

When drilling holes in the chassis for installation, take

precautions so as not to contact, damage or obstruct pipes,

fuel lines, tanks or electrical wiring. Failure to take such

precautions may result in fire.

• Be sure to connect the color coded leads according to the

diagram. Incorrect connections may cause the unit to

malfunction or damage to the vehicle's electrical system.

• When making connections to the vehicle's electrical system, be

aware of the factory installed components (e.g. on-board

computer). Do not tap into these leads to provide power for this

unit. When connecting the CDA-7977/CDA-7876/CDA-7875/

CDA-7873 to the fuse box, make sure the fuse for the intended

circuit of the CDA-7977/CDA-7876/CDA-7875/CDA-7873 has

the appropriate amperage. Failure to do so may result in damage

to the unit and/or the vehicle. When in doubt, consult your

ALPINE dealer.

• The CDA-7977/CDA-7876/CDA-7875/CDA-7873 uses female

RCA-type jacks for connection to other units (e.g. amplifier)

having RCA connectors. You may need an adaptor to connect

other units. If so, please contact your authorized ALPINE

dealer for assistance.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR

STEERING SYSTEMS TO MAKE GROUND

CONNECTIONS.

Bolts or nuts used for the brake or steering systems (or

any other safety-related system), or tanks should NEVER

be used for installations or ground connections. Using

such parts could disable control of the vehicle and cause

fire etc.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT

OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury.

If swallowed, consult a physician immediately.

• Be sure to connect the speaker (–) leads to the speaker (–)

terminal. Never connect left and right channel speaker cables

to each other or to the vehicle body.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT

HINDER VEHICLE OPERATION, SUCH AS THE

STEERING WHEEL OR GEARSHIFT.

Doing so may obstruct forward vision or hamper

movement etc. and results in serious accident.

IMPORTANT

Please record the serial number of your unit in the

space provided below and keep it as a permanent

record. The serial number plate is located on the

bottom of the unit.

SERIAL NUMBER:

INSTALLATION DATE:

INSTALLATION TECHNICIAN:

PLACE OF PURCHASE:

28-EN

Connect each input lead coming from an amplifier or

equalizer to the corresponding output lead coming

from the left rear of the CDA-7977/CDA-7876/CDA-

7875/CDA-7873. Connect all other leads of the CDA-

7977/CDA-7876/CDA-7875/CDA-7873 according to

details described in the CONNECTlONS section.

Installation

Metal plate

Detachable

Front panel

Caution

When you install this unit in your car, do not remove

the Detachable Front Panel.

If the Detachable Front Panel is removed during

installation, you might press too hard and warp the

metal plate that holds it in place.

Lock Pin

Slide the CDA-7977/CDA-7876/CDA-7875/CDA-

7873 into the dashboard. When the unit is in place,

make sure the locking pins are fully seated in the

down position. This can be done by pressing firmly in

on the unit while pushing the locking pin down with a

small screwdriver. This ensures that the unit is

properly locked and will not accidentally come out

from the dashboard. Install the Detachable Front

Panel.

Mounting Sleeve

(Included)

Dashboard

Removal

CDA-7977/CDA-7876/CDA-7875/CDA-7873

1 Remove the DETACHABLE FRONT PANEL.

2 Use a small screwdriver (or similar tool) to push

the locking pins to the “up” position (see above

drawing). As each pin is unlocked, gently pull out

on the unit to make sure it does not re-lock before

unlocking the second pin.

Slide the mounting sleeve into the dashboard.

3 Pull the unit out, keeping it unlocked as you do

so.

Screw

Hex Nut (M5)

∗∗

Bolt Stud

Metal

Mounting

Strap

Face Plate

∗

CDA-7977/

CDA-7876/

CDA-7875/

CDA-7873

Ground Lead

Chassis

CDA-7977/

CDA-7876/

CDA-7875/

CDA-7873

Screws (M5 × 8)

(Included)

Reinforce the head unit with the metal mounting

strap (not supplied). Secure the ground lead of the

unit to a clean metal spot using a screw ( ) already

attached to the vehicle's chassis.

∗

Ground Lead

∗

NOTE

^{For the screw marked}**^{, use an appropriate screw for}

the chosen mounting location.

Mounting Bracket

NOTE

Secure the ground lead of the unit to a clean metal spot

using a screw ( ) already attached to the vehicle's

∗

chassis.

29-EN

Installation and Connections

Connections

Antenna

POWER ANT

Blue

To power antenna

REMOTE

TURN-ON

Blue/White

To amplifier or equalizer

AUDIO

INTERRUPT IN

Pink/Black

Orange

To vehicle phone

ILLUMINATION

IGNITION

To the instrument cluster

illumination lead

Red

Choke coil

BATTERY

Ignition Key

Yellow

GND

Black

Battery

(CDA-7876/CDA-7875/

Speakers

CDA-7873 only)

Gray

SPEAKER

Gray/

RIGHT FRONT

Black

Front right

Violet/

Black

SPEAKER

RIGHT REAR

Violet

Rear right

Rear left

Front left

Ai-NET

Green

(

NORM

EQ/DIV

SPEAKER

LEFT REAR

Green/

Black

White/

Black

)

SPEAKER

LEFT FRONT

White

CD Changer

Speakers

Front Left

(Sold Separately)

;

Amplifier

Front Right

;

Rear Left

Rear Right

Subwoofers

For details on how to set the Subwoofer to ON/OFF, see “Subwoofer On and Off” on page 6.

30-EN

1 Antenna Receptacle

% Right Rear (+) Speaker Output Lead (Violet)

(CDA-7876/CDA-7875/CDA-7873 only)

2 Power Antenna Lead (Blue)

Connect this lead to the +B terminal of your power

antenna, if applicable.

& Left Rear (+) Speaker Output Lead (Green)

(CDA-7876/CDA-7875/CDA-7873 only)

( Left Rear (–) Speaker Output Lead (Green/

NOTE

Black) (CDA-7876/CDA-7875/CDA-7873 only)

This lead should be used only for controlling the

vehicle's power antenna. Do not use this lead to turn on

an amplifier or a signal processor, etc.

) Left Front (–) Speaker Output Lead (White/Black)

(CDA-7876/CDA-7875/CDA-7873 only)

3 Remote Turn-On Lead (Blue/White)

Connect this lead to the remote turn-on lead of your

amplifier or signal processor.

~ Left Front (+) Speaker Output Lead (White)

(CDA-7876/CDA-7875/CDA-7873 only)

+ Ai-NET Connector

4 Audio Interrupt In Lead (Pink/Black)

Connect this to the output or input connector of other

product (CD Changer, Equalizer, etc.) equipped with

Ai-NET.

5 Illumination Lead (Orange)

This lead may be connected to the vehicle's

instrument cluster illumination lead. This will allow

the backlighting of the CDA-7977/CDA-7876/CDA-

7875/CDA-7873 to dim whenever the vehicle's lights

are turned on.

NOTE

You can input TV/video sound by connecting an optional

Ai-NET/RCA Interface cable (KCA-121B) to this

component.

, DC/DC Converter (CDA-7977 only)

6 Switched Power Lead (Ignition) (Red)

Connect this lead to an open terminal on the vehicle's

fuse box or another unused power source which

provides (+)12V only when the ignition is turned on

or in the accessory position.

NOTES

• Do not install the converter at a location subjected to

water such as under the floor mat or air conditioner.

This may cause a malfunction.

• Do not bundle the DC/DC converter cable with other

audio cables. Doing so may induce noise into your

system.

• Keep the DC/DC converter away from the Antenna

cables and the rear side of the unit, otherwise noise

may be generated when receiving radio broadcast.

7 Battery Lead (Yellow)

Connect this lead to the positive (+) post of the

vehicle's battery.

NOTE (CDA-7876/CDA-7875/CDA-7873 only)

Use an extension battery lead (20A)(sold separately) and

connect it directly to the positive (+) side of the vehicle's

battery.

- Ai-NET Cable (Included with CD Changer)

. Front Output RCA Connectors

/ Rear Output RCA Connectors

8 Ground Lead (Black)

RED is right and WHITE is left.

Connect this lead to a good chassis ground on the

vehicle. Make sure the connection is made to bare

metal and is securely fastened using the sheet metal

screw provided.

: Subwoofer RCA Connectors

RED is right and WHITE is left.

; RCA Extension Cable (Sold Separately)

9 Fuse Holder

< System Switch

(5A ...... CDA-7977 only)

When connecting a processor or divider using Ai-

NET, place this switch in the EQ/DIV position. When

no device is connected, leave the switch in the NORM

position.

(20A .... CDA-7876/CDA-7875/CDA-7873 only)

! Power Supply Connector

" Right Front (+) Speaker Output Lead (Gray)

(CDA-7876/CDA-7875/CDA-7873 only)

NOTE

# Right Front (–) Speaker Output Lead (Gray/

Be sure to turn the power off to the unit before changing

the switch position.

Black) (CDA-7876/CDA-7875/CDA-7873 only)

$ Right Rear (–) Speaker Output Lead (Violet/

Black) (CDA-7876/CDA-7875/CDA-7873 only)

To prevent external noise from entering the audio system.

• Locate the unit and route the leads at least 10 cm away from the car harness.

• Keep the battery power leads as far away from other leads as possible.

• Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.

• If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries

various noise suppressors, contact them for further information.

• Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.

31-EN

32-EN

GARANTIE LIMITÉE

Fidèles à leur engagement de ne fournir que des produits de qualité, ALPINE ELECTRONIQUE DE L'AMERIQUE INC. et

ALPINE ELECTRONIQUE DU CANADA INC. (Alpine) sont heureuses de vous offrir cette garantie. Nous vous suggérons de le

lire attentivement et en entier. Si vous avez la moindre question, veuillez contacter l'un de nos concessionnaires ou appeler

directement Alpine au numéros Liste ci-dessous.

2 Vous devez donner une description détaillée des

[PRODUITS COUVERT PAR LA GARANTIE

Cette garantie couvre les produits audio/visuel de voiture et

les accessoires connexes ("le produit"). Elle ne couvre les

produits que dans le pays où il ont été achetés.

problèmes qui sont à l'origine de votre demande de

réparation.

3 Vous devez joindre la preuve de votre achat du produit.

4 Vous devez emballer soigneusement le produit pour éviter

tout dommage durant son transport.

[DURÉE DE LA GARANTIE

Cette garantie est en vigueur pendant un an à partir de la date

du premier achat du client.

[LIMITATION DES GARANTIES TACITES

LA DURÉE DE TOUTES LES GARANTIES TACITES, Y

COMPRIS LA GARANTIE D'ADAPTATION A L'UTILISATION

ET LA GARANTIE DE QUALITÉ LOYALE ET MARCHANDE,

EST LIMITÉE À CELLE DE LA GARANTIE EXPRESSE

DÉTERMINÉE CI-DESSUS. PERSONNE N'EST AUTORISÉ

À ENGAGER AUTREMENT LA RESPONSABILITÉ D'ALPINE

EN VERTU DE LA VENTE D'UN PRODUIT.

[GARANTIE À VIE DES TÊTES DE LECTURE DES

MAGNÉTOPHONES À CASSETTES

Toutes les têtes de cassettes analogiques audio de voiture

Alpine, à l’exception des êtes de cassettes vidéo sont

garanties à vie contre des vices de fabrication pouvant

entraîner leur panne.

[PERSONNES PROTÉGÉES PAR LA GARANTIE

Seul l'acheteur original du produit, s'il résisde aux États-Unis,

à Porto Rico ou au Canada, peut se prévaloir de la garantie.

[EXCLUSIONS DE LA GARANTIE

ALPINE STIPULE EXPRESSÉMENT QU'ELLE N'EST PAS

RESPONSABLE DES DOMMAGES DOMMAGES-INTÉRÊTS

ET DOMMAGES INDIRECTS PROVOQUÉS PAR LE

PRODUIT. LES DOMMAGES DOMMAGES-INTÉRÊTS

SONT LES FRAIS DE TRANSPORT DU PRODUIT VERS UN

CENTRE DE SERVICE ALPINE, LA PERTE DE TEMPS DE

L'ACHETEUR ORIGINAL, LA PERTE D'UTILISATION DU

PRODUIT, LES BILLETS D'AUTOBUS, LA LOCATION DE

VOITURES ET TOUS LES AUTRES FRAIS LIÉS À LA

GARDE DU PRODUIT.

[CE QUI EST COUVERT

Cette garantie couvre tous les défauts de matériaux et de

fabrication (pièces et main d'œuvre) du produit.

[CE QUI N'EST PAS COUVERT

Cette garantie ne couvre pas ce qui suit:

1 Les dommages survenus durant le transport des produits

renvoyés à Alpine pour être réparés (les réclamations

doivent être adressées au transporteur);

LES DOMMAGES INDIRECTS SONT LES FRAIS DE

RÉPARATION OU DE REMPLACEMENT D'AUTRES BIENS

ENDOMMAGÉS SUITE AU MAUVAIS FONCTIONNEMENT

DU PRODUIT.

LES RECOURS PRÉVUS PAR LES PRÉSENTES

EXCLUENT ET REMPLACENT TOUTE AUTRE FORME DE

RECOURS.

Tout dégât provoqué par accident, abus, négligence,

usage inapproprié, mauvais raccordement, mauvaise

utilisation ou par le non-respect des instructions

indiquées dans le manuel de l’utilisateur.

3 Les dommages dus à la force majeure, notamment aux

tremblements de terre, au feu, aux inondations, aux

tempêtes ou aux autres cataclysmes naturels;

4 Les frais ou les dépenses relatifs à l'enlèvement ou à la

réinstallation du produit;

5 Les services rendus par une personne, physique ou

morale non autorisée;

6 Les produits dont le numéro de série a été effacé, modifié

ou retiré;

[LIEN ENTRE LA GARANTIE ET LA LOI

La garantie vous donne des droits spécifiques, mais vous

pouvez aussi jouir d'autres droits, qui varient d'un état ou

d'une province à l'autre. En outre, certains états et certaines

provinces interdisent de limiter la durée des garanties tacites

ou d'exclure les dommages accessoires ou indirects. Dans ce

cas, les limites et les exclusions de la garantie peuvent ne pas

s'appliquer à vous.

7 Les produits qui ont été adaptés ou modifiés sans le

consentement d'Alpine;

[CLAUSE APPLICABLE AU CANADA SEULEMENT

Pour que la garantie soit valable, il faut qu'un centre

d'installation autorisé ait installé le système audio pour l'auto

dans votre véhicule et qu'il ait ensuite apposé son cachet sur

la garantie.

8 Les produits qui ne sont pas distribués par Alpine aux

Etats-Unis, à Porto Rico ou au Canada;

9 Les produits qui n'ont pas été achetés par l'entremise d'un

concessionnaire Alpine autorisé;

Tout produit qui a été déterminé comme contenant une

quantité excessive de poussière ou de saleté et tout

produit qui contient d’autres saleté, en ce compris du

liquide et des corps étrangers.

[NUMÉROS D'APPEL DU SERVICE À LA CLIENTELE

Si vous avez besoin de nos services, veuillez appeler le

centre de service autorisé Alpine le plus proche.

[COMMENT SE PRÉVALOIR DE LA GARANTIE

1 Il vous faut remettre le produit nécessitant des réparations

à un centre de service autorisé Alpine ou à Alpine même et

en assumer les frais de transport. Alpine a le choix entre

réparer le produit ou le remplacer par un produit neuf ou

révisé, le tout sans frais pour vous. Si les réparations sont

couvertes par la garantie et si le produit a été envoyé à un

centre de service Alpine ou à Alpine, le paiement des frais

de réexpédition du produit incombe Alpine.

U.S.A.

CANADA

1-800-ALPINE-1 (1-800-257-4631)

Alpine Électronique de L'Amérique, Inc., 19145 Gramercy Place, Torrance, California 90501, U.S.A.

Alpine Électronique du Canada, Inc., Suite 203, 7300 Warden Ave. Markham, Ontario L3R 9Z6, Canada

LIMITED WARRANTY

ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. ("Alpine"), are dedicated to quality

craftsmanship and are pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any

questions, please contact your Dealer or Alpine at one of the telephone numbers listed below.

2 You should provide a detailed description of the

[PRODUCTS COVERED:

problem(s) for which service is required.

3 You must supply proof of your purchase of the product.

4 You must package the product securely to avoid

damage during shipment.

This Warranty covers Car Audio/Visual Products and

Related Accessories ("the product"). Products purchased in

the Canada are covered only in the Canada. Products

purchased in the U.S.A. are covered only in the U.S.A.

[HOW WE LIMIT IMPLIED WARRANTIES:

ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR

USE AND MERCHANTABILITY ARE LIMITED IN

DURATION TO THE PERIOD OF THE EXPRESS

WARRANTY SET FORTH ABOVE AND NO PERSON IS

AUTHORIZED TO ASSUME FOR ALPINE ANY OTHER

LIABILITY IN CONNECTION WITH THE SALE OF THE

PRODUCT.

[LENGTH OF WARRANTY:

This Warranty is in effect for one year from the date of the

first consumer purchase.

[LIFETIME TAPE HEAD WARRANTY:

All Alpine Car Audio analog tape heads excluding Video

tape heads are warranted for life against manufacturing

defects causing failure.

[WHO IS COVERED:

This Warranty only covers the original purchaser of the

product, who must reside in the United States, Puerto Rico

or Canada.

[HOW WE EXCLUDE CERTAIN DAMAGES:

ALPINE EXPRESSLY DISCLAIMS LIABILITY FOR

INCIDENTAL AND CONSEQUENTIAL DAMAGES

CAUSED BY THE PRODUCT. THE TERM "INCIDENTAL

DAMAGES" REFERS TO EXPENSES OF

[WHAT IS COVERED:

This Warranty covers defects in materials or workmanship

(parts and labor) in the product.

TRANSPORTING THE PRODUCT TO THE ALPINE

SERVICE CENTER, LOSS OF THE ORIGINAL

PURCHASER'S TIME, LOSS OF THE USE OF THE

PRODUCT, BUS FARES, CAR RENTALS OR OTHERS

COSTS RELATING TO THE CARE AND CUSTODY OF

THE PRODUCT. THE TERM "CONSEQUENTIAL

DAMAGES" REFERS TO THE COST OF REPAIRING OR

REPLACING OTHER PROPERTY WHICH IS DAMAGED

WHEN THIS PRODUCT DOES NOT WORK PROPERLY.

THE REMEDIES PROVIDED UNDER THIS WARRANTY

ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS.

[WHAT IS NOT COVERED:

This Warranty does not cover the following:

1 Damage occurring during shipment of the product to

Alpine for repair (claims must be presented to the

carrier).

2 Damage caused by accident, abuse, negligence,

misuse, improper connections, improper operation or

failure to follow instructions contained in the Owner's

manual.

3 Damage caused by act of God, including without

limitation, earthquake, fire, flood, storms or other acts of

nature.

4 Any cost or expense related to the removal or

reinstallation of the product.

5 Service performed by an unauthorized person, company

or association.

6 Any product which has the serial number defaced,

altered or removed.

7 Any product which has been adjusted, altered or

modified without Alpine's consent.

8 Any product not distributed by Alpine within the United

States, Puerto Rico or Canada.

9 Any product not purchased from an Authorized Alpine

Dealer.

[HOW STATE/PROVINCIAL LAW RELATES TO THE

WARRANTY:

This Warranty gives you specific legal rights, and you may

also have other rights which vary form state to state and

province to province. In addition, some states/provinces do

not allow limitations on how long an implied warranty lasts,

and some do not allow the exclusion or limitation of

incidental or consequential damages. Accordingly,

limitations as to these matters contained herein may not

apply to you.

[IN CANADA ONLY:

This Warranty is not valid unless your Alpine car audio

product has been installed in your vehicle by an Authorized

Installation Center, and this warranty stamped upon

installation by the installation center.

! Any product that has been determined to contain an

excessive amount of dust or dirt and any product that

contains other contaminants including liquid or foreign

objects.

[HOW TO CONTACT CUSTOMER SERVICE:

Should the product require service, please call the following

number for your nearest Authorized Alpine Service Center.

[HOW TO OBTAIN WARRANTY SERVICE:

U.S.A.

CANADA

1-800-ALPINE-1 (1-800-257-4631)

1 You are responsible for delivery of the product to an

Authorized Alpine Service Center or Alpine for repair

and for payment of any initial shipping charges. Alpine

will, at its option, repair or replace the product with a

new or reconditioned product without charge. If the

repairs are covered by the warranty, and if the product

was shipped to an Authorized Alpine Service Center or

Alpine, Alpine will pay the return shipping charges.

Alpine Electronics of America, Inc., 19145 Gramercy Place, Torrance, California 90501, U.S.A.

Alpine Electronics of Canada, Inc., Suite 203, 7300 Warden Ave. Markham, Ontario, L3R 9Z6, Canada

Alpine cda 9825 User Manual
Audiovox Prestige P 950W User Manual
Baxi Potterton WH46 User Manual
Blaupunkt Missouri DJ70 User Manual
Bushnell Binoculars 13 Jul User Manual
Canon 9518B002 User Manual
Focal Polyglass 165 VB User Manual
Franklin Calculator English Language Trainer User Manual
Hitachi Camcorder DZ MV780E User Manual
JVC GET0054 001A User Manual