Alpine MULTIMEDIA MANAGER PXA H701 User Manual

FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/  
PARA USO EN AUTOMÓVILES/SOLO PER L'UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK  
R
EN  
DE  
FR  
ES  
IT  
PXA-H701  
MULTIMEDIA MANAGER™  
• OWNER'S MANUAL  
Please read before using this equipment.  
• BEDIENUNGSANLEITUNG  
Lesen Sie diese Bedienungsanleitung bitte vor  
Gebrauch des Gerätes.  
• MODE D'EMPLOI  
Veuillez lire avant d’utiliser cet appareil.  
• MANUAL DE OPERACIÓN  
Léalo antes de utilizar este equipo.  
• ISTRUZIONI PER L’USO  
Si prega di leggere prima di utilizzare il  
attrezzatura.  
• ANVÄNDARHANDLEDNING  
Innan du använder utrustningen bör du läsa  
igenom denna användarhandledning.  
®
ALPINE ELECTRONICS MARKETING, INC.  
1-1-8 Nishi Gotanda,  
Shinagawa-ku, Tokyo 141-0031, Japan  
Phone 03-5496-8231  
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.  
6-8 Fiveways Boulevarde Keysborough,  
Victoria 3173, Australia  
ALPINE ELECTRONICS FRANCE S.A.R.L.  
(RCS PONTOISE B 338 101 280)  
98, Rue de la Belle Etoile, Z.I. Paris  
Nord II, B.P. 50016, 95945 Roissy  
Charles de Gaulle Cedex, France  
Phone 01-48638989  
Phone 03-9769-0000  
ALPINE ELECTRONICS OF AMERICA, INC.  
19145 Gramercy Place, Torrance,  
California 90501, U.S.A.  
ALPINE ELECTRONICS GmbH  
Frankfurter Ring 117, 80807 München,  
Germany  
SE  
ALPINE ITALIA S.p.A.  
Viale C. Colombo 8, 20090 Trezzano  
Sul Naviglio (MI), Italy  
Phone 1-800-ALPINE-1 (1-800-257-4631)  
Phone 089-32 42 640  
ALPINE ELECTRONICS OF CANADA, INC.  
7300 Warden Ave., Suite 203, Markham,  
Ontario L3R 9Z6, Canada  
ALPINE ELECTRONICS OF U.K. LTD.  
Alpine House  
Phone 02-484781  
Fletchamstead Highway,  
Coventry CV4 9TW, U.K.  
Phone 0870-33 33 763  
ALPINE ELECTRONICS DE ESPAÑA, S.A.  
Portal de Gamarra 36, Pabellón, 32  
01013 Vitoria (Alava) - APDO 133, Spain  
Phone 945-283588  
Phone 1-800-ALPINE-1 (1-800-257-4631)  
Kukje Printing Co., Ltd  
127-2 Gamjeon-dong  
Sasang-gu  
Busan Korea  
Designed by ALPINE Japan  
Printed in Korea (S)  
68-00493Z09-A  
WARNING  
WARNING  
CAUTION  
This symbol means important instructions.  
Failure to heed them can result in serious injury  
or death.  
This symbol means important instructions.  
Failure to heed them can result in injury or  
material property damage.  
DO NOT OPERATE ANY FUNCTION THAT TAKES  
YOUR ATTENTION AWAY FROM SAFELY DRIVING  
YOUR VEHICLE.  
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.  
Failure to do so may cause personal injury or damage to  
the product. Return it to your authorized Alpine dealer or  
the nearest Alpine Service Center for repairing.  
Any function that requires your prolonged attention  
should only be performed after coming to a complete stop.  
Always stop the vehicle in a safe location before  
performing these functions. Failure to do so may result in  
an accident.  
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN  
STILL HEAR OUTSIDE NOISE WHILE DRIVING.  
Failure to do so may result in an accident.  
MINIMIZE DISPLAY VIEWING WHILE DRIVING.  
Viewing the display may distract the driver from looking  
ahead of the vehicle and cause an accident.  
DO NOT DISASSEMBLE OR ALTER.  
Doing so may result in an accident, fire or electric shock.  
USE THIS PRODUCT FOR MOBILE 12V  
APPLICATIONS.  
Use for other than its designed application may result in  
fire, electric shock or other injury.  
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT  
OF THE REACH OF CHILDREN.  
Swallowing them may result in serious injury. If  
swallowed, consult a physician immediately.  
USE THE CORRECT AMPERE RATING WHEN  
REPLACING FUSES.  
Failure to do so may result in fire or electric shock.  
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE  
GROUND.  
(Check with your dealer if you are not sure.) Failure to do  
so may result in fire, etc.  
DO NOT BLOCK VENTS OR RADIATOR PANELS.  
Doing so may cause heat to build up inside and may result  
in fire.  
2-EN  
PRECAUTIONS  
Temperature  
Be sure the temperature inside the vehicle is between  
+60°C (+140°F) and –10°C (+14°F) before turning your  
unit on.  
Installation Location  
Make sure the PXA-H701 will not be installed in a  
location subjected to:  
Direct sun and heat  
High humidity and water  
Excessive dust  
Excessive vibrations  
Maintenance  
If you have problems, do not attempt to repair the unit  
yourself. Return it to your Alpine dealer or the nearest  
Alpine Service Station for servicing.  
3-EN  
Basic Operation  
Setting the speakers  
First make the speaker settings.  
Turn off speaker channels that are not  
connected.  
CHANNEL  
ENTER  
1
2
Press the SETUP button.  
The setup mode is set.  
Turn the Rotary encoder to select the  
“SPEAKER SELECT” mode, then press the  
ENTER button.  
SETUP  
Rotary encoder  
PRO LOGIC II indicator  
Dolby Digital indicator  
DTS indicator  
3
Press the CHANNEL button to select the  
speaker, then press the ENTER button.  
F1  
(Front 1)  
F2  
(Front 2)  
R
Turning the power on and off  
(Rear)  
This unit does not have a power switch. The head  
unit to which the unit is connected, controls its  
power.  
Ct  
(Centre)  
Sub. W  
(Subwoofer)  
4
Turn the Rotary encoder to set the speaker type  
ON or OFF, then press the ENTER button.  
Repeat steps 3 and 4 to set all unconnected  
speaker channels to “OFF”.  
NOTE  
When the power is turned ON for the first time, the  
SETUP mode is automatically activated.  
F1 (Front 1): Tw (Tweeter)/Full (Full Range)/OFF  
F2 (Front 2): Full (Full Range)/OFF  
About indicators  
R (Rear)  
: ON/OFF  
Ct (Centre) : Centre/Sub.W (Subwoofer)/OFF  
PRO LOGIC II indicator  
Lights amber in the Dolby Surround decode  
mode  
NOTE  
Set to “Subwoofer” when a subwoofer is connected to  
the centre speaker output.  
Dolby Digital indicator  
Lights amber in the Dolby Digital decode mode  
DTS indicator  
Sub.W (Subwoofer) : ON/OFF  
Lights amber in the DTS decode mode  
*
When Full (Full Range) is selected in F1  
(Front 1), the confirmation message of  
Tweeter presence will be displayed next.  
Turn the Rotary encoder and select YES/  
NO, then press the ENTER button. Please  
set to protect the speakers.  
Operating the Rotary encoder  
This unit uses the Rotary encoder when  
establishing settings or adjustments. When  
operating with the Rotary encoder, press the  
Rotary encoder and startup the Rotary encoder  
before the operation.  
5
Press the SETUP button repeatedly to quit the  
setup mode.  
4-EN  
Adjusting the input level  
Using with Ai-NET connections  
Using the analog, RCA-type connections, the  
PXA-H701s input level must be preset from the  
head unit.  
Adjust the input level using a sound source with  
a high recording level (such as pop or rock  
music).  
When Ai-NET connections are used, the volume,  
subwoofer, balance and fader are adjusted from  
the head unit (they cannot be adjusted from the  
PXA-H701). However, BASS and TREB can not  
be adjusted from the head unit, so adjust them  
from PXA-H701.  
1
Turn on the head units power.  
2
Turn the Rotary encoder on the main unit  
counterclockwise and set the volume level to 0.  
Using with RCA-type or optical cable  
connections (non Ai-NET connections)  
(only when using the control unit sold  
separately)  
3
Gradually increase the volume of the head unit  
until INPUT LEVEL OVERappears in the  
display.  
Reduce the volume slightly from this position,  
until INPUT LEVEL OVERdisplay just turns off.  
This completes the setting.  
Do not change the head unit volume level from  
this optimum setting. Use the PXA-H701, only,  
for changing the volume level.  
Switching the input  
The PXA-H701 is equipped with three sets of  
analog signal inputs and three sets of digital  
signal inputs. For further information about  
connections, see Page 36.  
NOTE  
Switch to the spectrum analyzer display mode or the  
input channel display mode before adjusting the input  
level. (See page 29)  
1
2
3
Press the SETUP button.  
The setup mode is set.  
Adjusting the volume, balance, fader and subwoofer  
Turn the Rotary encoder to select the INPUT  
SELECTmode, then press the ENTER button.  
After determining the input level, adjust the  
volume, balance, fader and subwoofer from the  
PXA-H701. Be careful not to make these  
adjustments on the head unit.  
Turn the Rotary encoder to select the input  
mode, then press the ENTER button.  
Analog 1  
Digital 3  
Analog 2  
Digital 2  
Analog 3  
Digital 1  
1
Press the ENTER button and select the mode to  
be adjusted.  
4
Press the SETUP button repeatedly to quit the  
setup mode.  
VOLUME BALANCE  
Sub.W LEVEL  
FADER  
NOTE  
Non Ai-NET connections  
2
Turn the Rotary encoder within 5 seconds and  
adjust to the desired level.  
Alpine products are equipped for a bus connection  
system called Ai-NETwhich can only be used for  
connections between Ai-NET products.  
The PXA-H701 is an Ai-NET product, but is designed to  
allow connections to other (non Ai-NET) products as  
well. Thus RCA-type and optical cable connections are  
also possible.  
VOLUME  
BALANCE  
FADER  
: 0 ~ 35  
: L15 ~ R15  
: F15 ~ R15  
Sub.W LEVEL : 0 ~ +15  
Connections to non Ai-NET products are referred to as  
non Ai-NET connections.  
NOTE  
When the subwoofer is set to OFF, the Sub.W  
LEVEL adjustment is ineffective.  
5-EN  
Automatic Adjustments  
3
Connect the microphone.  
1) Fasten the microphone included with control  
unit at the centre of the drivers seats  
headrest facing upwards.  
AUTO TCR  
ENTER  
To microphone  
Microphone  
input jack  
Belt, etc.  
Rotary encoder  
Performing time correction automatically  
(Automated Time Correction)  
2) Connect the microphone to the PXA-H701.  
Base unit  
Due to the particular conditions inside the  
vehicle, there is a major difference between the  
distances of the various speakers and the  
listening position. This function uses the  
included measurement microphone to  
automatically measure and analyse the distances  
between the speakers and the listening position  
and perform the optimum time correction.  
The AUTO TCR operation from the head unit  
may not be performed depending on the head  
unit combination.  
To microphone  
input jack  
Microphone  
4
Set the vehicles engine key to the ACC position.  
Vibrations could make it difficult to achieve  
the appropriate adjustment values, so turn  
the engine off.  
1
2
Check that the defeat mode is off.  
(See page 28.)  
Noise could make it impossible for automatic  
measurements to be made, so make sure  
the air conditioner, heater and all other  
devices are turned off.  
Prepare the vehicle.  
1) Park the vehicle in a quiet place.  
2) Close the vehicles doors and windows.  
5
6
Press the AUTO TCR button.  
Turn the Rotary encoder, select the tweeter  
setting, then press the ENTER button.  
YES  
NO  
The count down starts.  
7
Once the count down starts, get out of the  
vehicle and shut the doors within 10 seconds.  
AUT  
O
TCR  
10 sec .  
t o s t a r t  
6-EN  
With the automatic adjustment function, the  
operation described below is performed.  
Adjustments are completed in about 10 seconds.  
Time correction.  
ENDis displayed for about 15 seconds and the  
automatic adjustment is completed.  
If the microphone does not pick up the  
sound or the speakers are not working or are  
connected or wired improperly, the automatic  
adjustments are not performed and a error  
message is displayed.  
Check the various speakers then perform the  
automatic adjustments again.  
AUT  
O
TCR  
ERROR  
8
9
Check that the automatic adjustment has been  
completed (that ENDhas been displayed for  
about 15 seconds), then get back into the  
vehicle and disconnect the microphone.  
To store, follow the procedure described at  
Storing settings in the memory(page 28).  
NOTES  
Automatic measurements cannot be made unless the  
microphone is connected (error display). To perform  
time correction automatically, be sure to connect the  
included microphone first.  
Before making automatic measurements, press the  
AUTO TCR button to cancel it.  
No other operations can be performed while  
measurements are being made.  
Measurements will differ according to the position in  
which the microphone is mounted.  
Note that using for extended periods of time without  
turning on the engine may wear down the battery.  
Automatic measurements cannot be made for the  
subwoofer. Make the subwoofer setting manually.  
Refer to Performing time correction manually  
(TCR)/Switching the phase(page 8).  
When the speaker is set to the OFFmode, the TCR  
for that speaker cannot be adjusted. Refer to Setting  
the speakers(page 4).  
After making the settings, we recommend storing  
them in the memory. For instructions, see page 28.  
7-EN  
Settings/Adjustments  
Concrete examples  
1.Calculating the time correction value for the  
front left speaker on the diagram below.  
TCR/PHASE  
CHANNEL  
ENTER  
Conditions:  
Distance between farthest speaker and  
listening position: 2.25 m (88-3/4")  
Distance between front left speaker and  
listening position: 0.5 m (20")  
Calculation: L = 2.25 m (88-3/4") 0.5 m (20")  
= 1.75 m (68-3/4")  
Rotary encoder  
Compensation time = 1.75 ÷ 343 x 1000  
= 5.1 (ms)  
In other words, setting the time correction value  
for the front left speaker to 5.1 (ms) sets a  
virtual distance matching the distance to the  
farthest speaker.  
Performing time correction manually  
(TCR)/Switching the phase  
Because of the particular conditions inside the  
vehicle, there are major differences in the  
distances between the different speakers and the  
listening position. The proper time correction can  
be obtained using the automatic time correction  
function (AUTO TCR), but it is also possible to  
calculate the optimum correction values and  
eliminate the time error at the listening position  
yourself using this function.You can also use this  
function to switch the phase.  
5.1ms  
0.5m  
2.25m  
When operating with head units such as the IVA-  
D300 series, the adjustment is different  
depending on the head unit.  
The sound is uneven  
because the distance  
between the listening  
position and the different  
speakers is different.  
The difference in the  
distance between the  
front left and rear right  
speakers is 1.75 meters  
(68-3/4").  
Time correction eliminates  
the difference between  
the time required for the  
sound from the different  
speakers to reach the  
listening position.  
Setting the time correction  
of the front left speaker to  
5.1 ms makes it possible  
to coordinate the distance  
from the listening position  
to the speaker.  
1
2
Check that the defeat mode is off.  
(See page 28.)  
Sit in the listening position (the drivers seat, for  
example) and measure the distance (in meters)  
between your head and the various speakers.  
3
4
Calculate the difference in distance between the  
farthest speaker and the other speakers.  
L = (distance of farthest speaker)  
(distance of other speakers)  
5
Press the TCR/PHASE button to set the time  
correction mode.  
Divide the distances calculated for the different  
speakers by the speed of sound (343 m/s  
temperature 20°C).  
This value is the time correction value for the  
different speakers.  
8-EN  
9
Turn the Rotary encoder to switch the phase,  
then press the CHANNEL button.  
Press the ENTER button to return to step 8.  
6
7
Press and hold the CHANNEL button for at least  
2 seconds and select L and R (LR)or L or R.  
L and R (LR)  
L or R  
0
180  
(factory default)  
L and R (LR):Sets the same adjustment values  
for the left and right channels.  
T CR / PH AS E L F 1 RR  
L or R:  
Different adjustment values can be  
set for the left and right channels.  
:
DE L AY C  
R
C
1 0 . 2 5m s  
PHAS E : 1 8 0 °  
Press the CHANNEL button and select the  
desired channel, then press the ENTER button.  
When L and R (LR)is selected:  
10 Repeat steps 7 to 9 to adjust other channels.  
Front 1 Front 2 Rear  
Sub. W  
Cente*r1  
11 Once the adjustments are completed, press the  
TCR/PHASE button.  
When L or Ris selected:  
NOTES  
When the speaker is set to the OFFmode, the TCR  
for that speaker is ineffective. Refer to Setting the  
speakers(page 4).  
Front 1 L Front 1 R Front 2 L Front 2 R  
*3  
*2  
Sub. W  
Center  
Rear R Rear L  
After making the settings, we recommend storing  
them in the memory. For instructions, see page 28.  
*1 When centre is set to subwoofer, it is not  
displayed.  
*2 When centre is set to subwoofer, it becomes  
Sub.W(L).  
*3 When centre is set to subwoofer, it becomes  
Sub.W(R).  
8
Turn the Rotary encoder to adjust the time  
correction value (0.00 ~ 20.00ms), then press  
the ENTER button.  
T CR / PH AS E L F 1 RR  
:
DE L AY C  
R
C
1 0 . 2 5m s  
PHAS E : 1 8 0 °  
* The difference in the sound when the defeat  
mode is turned off (adjusted time  
correction) and on (default value) can be  
checked as follows:  
1) While in the adjustment mode, press and  
hold the TCR/PHASE button for at least 2  
seconds.  
2) Press the TCR/PHASE button to switch the  
defeat mode on and off and listen to the  
difference in the sound.  
3) To quit, select the desired setting, then press  
the ENTER button.  
Note that if you press the ENTER button with  
the defeat mode turned on, the adjustments  
are reset to the defeat on status (the default  
values).  
9-EN  
Settings/Adjustments  
5
6
7
Turn the Rotary encoder to set the step of front-  
rear/left-right.  
TCR/PHASE  
CHANNEL  
ENTER  
Moreover, for setting another channel (speaker),  
repeat steps 4 and 5.  
After completing the setting, press the ENTER  
button to return to the time correction mode.  
Here, you can compare the sound of Defeat OFF  
(adjustment value) and Defeat ON (initial).  
For the operation method, refer to step 8 of  
Performing time correction manually (TCR)/  
Switching the phaseon page 9.  
B.C.  
Rotary encoder  
8
Press the TCR/PHASE button to complete the  
setting.  
NOTE  
Bass Focus  
The setting made in Bass Focus is reflected in the time  
correction.  
The time difference between the front-rear/left-  
right speakers, can be adjusted a pair at a time.  
Audible time correction can be made from 0.05  
ms to 20.00 ms in 401 steps (0 to 400).  
1
2
3
4
Check that the defeat mode is off.  
(See page 28.)  
Press the TCR/PHASE button to select the time  
correction mode.  
Press the B.C. button to select the BASS  
FOCUSsetting mode.  
Press the CHANNEL button to select the front-  
rear/left-right speaker.  
FL  
RL  
FR  
RR  
FL  
RL  
FR  
RR  
Front (left-right)  
speakers  
Left (front-rear)  
speakers  
FL  
RL  
FR  
RR  
FL  
RL  
FR  
RR  
Rear (left-right)  
speakers  
Right (front-rear)  
speakers  
10-EN  
Time difference Table  
Example of Steps 4 and 5 Setting  
1.After entering corrections for the front (left and  
right) speakers in STEP 30, the time difference  
is 1.5 ms for both front-left and front-right  
speakers.  
Number  
of  
steps  
Time  
Difference  
(ms)  
Number  
of  
steps  
Time  
Difference  
(ms)  
Number  
of  
steps  
Time  
Difference  
(ms)  
0
0.00  
0.05  
0.10  
0.15  
0.20  
0.25  
0.30  
0.35  
0.40  
0.45  
0.50  
0.55  
0.60  
0.65  
0.70  
0.75  
0.80  
0.85  
0.90  
0.95  
1.00  
1.05  
1.10  
1.15  
1.20  
1.25  
1.30  
1.35  
1.40  
1.45  
1.50  
1.55  
1.60  
1.65  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
59  
60  
61  
62  
63  
64  
65  
66  
67  
1.70  
1.75  
1.80  
1.85  
1.90  
1.95  
2.00  
2.05  
2.10  
2.15  
2.20  
2.25  
2.30  
2.35  
2.40  
2.45  
2.50  
2.55  
2.60  
2.65  
2.70  
2.75  
2.80  
2.85  
2.90  
2.95  
3.00  
3.05  
3.10  
3.15  
3.20  
3.25  
3.30  
3.35  
68  
69  
70  
71  
72  
73  
74  
75  
76  
77  
78  
79  
80  
81  
82  
83  
84  
85  
86  
87  
88  
89  
90  
91  
92  
93  
94  
95  
96  
97  
98  
99  
3.40  
3.45  
3.50  
3.55  
3.60  
3.65  
3.70  
3.75  
3.80  
3.85  
3.90  
3.95  
4.00  
4.05  
4.10  
4.15  
4.20  
4.25  
4.30  
4.35  
4.40  
4.45  
4.50  
4.55  
4.60  
4.65  
4.70  
4.75  
4.80  
4.85  
4.90  
4.95  
1
2
3
4
5
1.5ms  
1.5ms  
6
7
8
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
2. After entering corrections for the left (front and  
rear) speakers in STEP 30, the time difference  
becomes 3.0 ms* for the front left speaker, and  
1.5 ms for the left rear speaker.  
* Because the time difference was already set  
to 1.5 ms for the front left speakers in STEP 1,  
the additional correction in STEP 30 makes  
the time difference of the front left speaker 3.0  
ms.  
3.0ms  
1.5ms  
1.5ms  
1.5ms  
1.5ms  
100399 5.0019.95  
400  
20.00  
11-EN  
Settings/Adjustments  
*1 When centre is set to subwoofer, it is not  
displayed.  
*2 When centre is set to subwoofer, it becomes  
Sub.W(L).  
*3 When centre is set to subwoofer, it becomes  
Sub.W(R).  
G.EQ  
CHANNEL  
ENTER  
5
6
Turn the Rotary encoder to select the  
frequency, then press the ENTER button.  
Adjustable frequencies  
Front/Rear/Centre: 20Hz~20kHz (1/3 octave  
step)  
P.EQ  
Rotary encoder  
Sub.W: 20Hz~160Hz (1/3 octave step)  
Turn the Rotary encoder to adjust the level ( 9  
dB in steps of 1 dB), then press the ENTER  
button.  
Graphic equalizer adjustments  
3 1 G . E  
Q
F r o n t  
L
The graphic equalizer allows you to modify the  
sound using 31 bands each for the front (left and  
right), rear (left and right) and centre speakers.  
An additional 10 bands are available for the  
subwoofer. This allows you to customize the  
sound to suit your taste.  
1 2 . 5 k H z  
9 d B  
7
8
Repeat steps 5 and 6 to adjust other  
frequencies.  
To adjust other channels, press the CHANNEL  
button to return to step 4.  
1
2
3
Check that the defeat mode is off.  
(See page 28.)  
* The difference in the sound when the defeat  
mode is turned off (adjusted graphic  
equalizer settings) and on (default values)  
can be checked as follows:  
1) While in the adjustment mode, press and  
hold the G.EQ button for at least 2 seconds.  
2) Press the G.EQ button to switch the defeat  
mode on and off and listen to the difference  
in the sound.  
Press the G.EQ button to set the graphic  
equalizer mode.  
Press and hold the CHANNEL button for at least  
2 seconds and select L and R (LR)or L or R.  
L and R (LR)  
L or R  
(factory default)  
3) To quit, select the desired setting, then press  
the ENTER button.  
L and R (LR):Sets the same adjustment values  
for the left and right channels.  
Note that if you press the ENTER button with  
the defeat mode turned on, the adjustments  
are reset to the defeat on status (the default  
values).  
L or R:  
Different adjustment values can be  
set for the left and right channels.  
4
Press the CHANNEL button to select the desired  
channel, then press the ENTER button.  
9
Once the adjustments are completed, press the  
G.EQ button.  
NOTES  
When L and R (LR)is selected:  
When the speaker is set to the OFFmode, the  
graphic equalizer for that speaker is ineffective.  
Refer to Setting the speakers(page 4).  
Check the playable frequency ranges of the connected  
speakers before making the equalizer adjustments. If  
the speakers playable frequency range is 55 Hz to 30  
kHz, for example, adjusting the 40 Hz or 20 Hz band  
has no effect. Additionally, you may overload and  
damage the speakers.  
After making the settings, we recommend storing  
them in the memory. For instructions, see page 28.  
When graphic EQ is adjusted, the adjustment for  
parametric EQ becomes ineffective.  
*1  
Front  
Rear  
Center  
Sub. W  
When L or Ris selected:  
Front L Front R Rear L  
Rear R  
*3  
*2  
Center  
Sub. W  
12-EN  
6
7
Turn the Rotary encoder to select the  
frequency, then press the ENTER button.  
For the adjustable frequencies, see page 43.  
Parametric equalizer adjustments  
The frequency bands of the graphic equalizer are  
fixed. This makes it very difficult to correct for  
undesired peaks and dips at specific frequencies.  
The parametric equalizers centre frequency can  
be tuned these specific frequencies. Then, the  
bandwidth (Q) and level are fine-tuned,  
independently, to make the necessary  
corrections. The parametric equalizer function is  
an advanced tool for serious audiophiles.  
P . E  
Q
P F r o n t  
L
BAND : 4  
F c : 3 . 1 5 k H z  
Q
: 2  
L v : + 7 d B  
Turn the Rotary encoder to adjust the band  
width (Q), then press the ENTER button.  
The band width can be adjusted in 6 steps of  
0.5/1/2/3/4/5.  
1
2
3
Check that the defeat mode is off.  
(see page 28.)  
Press the P.EQ button to set the parametric  
equalizer mode.  
Press and hold the CHANNEL button for at least  
2 seconds and select L and R (LR)or L or R.  
P . E  
Q
P F r o n t  
L
BAND : 4  
F c : 3 . 1 5 k H z  
L and R (LR)  
L or R  
Q
: 2  
(factory default)  
L v : + 7 d B  
L and R (LR):Sets the same adjustment values  
for the left and right channels.  
L or R:  
Different adjustment values can be  
set for the left and right channels.  
8
Turn the Rotary encoder to adjust the level ( 9  
dB in steps of 1 dB), then press the ENTER  
button.  
4
Press the CHANNEL button to select the desired  
channel, then press the ENTER button.  
P . E  
Q
F r o n t  
L
When L and R (LR)is selected:  
*1  
BAND : 4  
Front  
Rear  
Center  
Sub. W  
F c : 3 . 1 5 k H z  
Q
: 2  
L v : + 7 d B  
When L or Ris selected:  
Front L Front R Rear L  
Rear R  
*3  
*2  
Sub. W  
Center  
*1 When centre is set to subwoofer, it is not  
displayed.  
*2 When centre is set to subwoofer, it becomes  
Sub.W(L).  
*3 When centre is set to subwoofer, it becomes  
Sub.W(R).  
5
Turn the Rotary encoder to select the band,  
then press the ENTER button.  
Adjustable bands  
Front/Rear/Centre : 5 bands  
Sub.W : 2 bands  
P . E  
Q
P F r o n t  
L
BAND : 4  
F c : 3 . 1 5 k H z  
Q
: 2  
L v : + 7 d B  
13-EN  
Settings/Adjustments  
NOTES  
When the speaker is set to the OFFmode, the  
parametric equalizer for that speaker is ineffective.  
Refer to Setting the speakers(page 4).  
It is not possible to adjust the frequencies of adjacent  
bands within 7 steps.  
CHANNEL  
ENTER  
Check the playable frequency ranges of the connected  
speakers before making the equalizer adjustments. If  
the speaker's playable frequency range is 55 Hz to 30  
kHz, for example, adjusting the 40 Hz or 20 Hz band  
has no effect. Additionally, you may overload and  
damage the speakers.  
After making the settings, we recommend storing  
them in the memory. For instructions, see page 28.  
When parametric EQ is adjusted, the adjustment for  
graphic EQ becomes ineffective.  
P.EQ  
9
Repeat steps 5 to 8 to adjust other bands.  
10 To adjust other channels, press the CHANNEL  
button to return to step 4.  
* To compare the factory default settings  
(DEFEAT ON) with your newly adjusted  
parametric equalizer settings (DEFEAT  
OFF), do the following:  
1) While in the adjustment mode, press and  
hold the P.EQ button for at least 2 seconds.  
2) Press the P.EQ button to switch the defeat  
mode on and off and listen to the difference  
in the sound.  
3) To quit, select the desired setting, then press  
the ENTER button.  
Note that if you press the ENTER button with  
the defeat mode turned on, the adjustments  
are reset to the defeat on status (the default  
values).  
11 Once the adjustments are completed, press the  
P.EQ button.  
14-EN  
X-OVER  
Signals with these frequencies output  
The PXA-H701 is equipped with an active  
crossover allowing the frequency bands to be  
split before amplification. Because of this, there  
is no need for a passive network between the  
speakers and amplifiers. This makes the  
amplifiers fully independent, eliminating the  
problem of interference. This also makes it  
possible to achieve the optimum acoustic space  
by dividing the playback frequencies in a way  
suited to the speakers response.  
Slope OFF  
Slope adjustment  
20Hz  
10kHz  
H.P.F. cutoff frequency L.P.F. cutoff frequency  
The H.P.F. setting cannot be the same as or  
exceed the L.P.F. setting for that channel.  
This adjustment requires sufficient knowledge  
and experience. If you have problems, we  
suggest you have the adjustment made by your  
store authorized of Alpine dealer.  
The crossover network is a filter that divides  
specific frequency bands.  
The high pass filter is a filter that cuts  
frequencies below a certain frequency (bass  
frequencies) and lets through treble  
frequencies.  
The low pass filter is a filter that cuts  
frequencies above a certain frequency  
(treble frequencies) and lets through bass  
frequencies.  
The slope is a value expressing the  
attenuation of the signal in decibels when the  
frequency is increased or decreased by one  
octave.  
The higher the slope value, the steeper the  
slope.  
If the slope is set to OFF, the signal does  
not pass through the filter, so there is no  
effect.  
In order to protect the speakers, if Tweeter is  
selected in Front 1, there is no filter OFF  
(slope OFF) setting for H.P.F.  
For the same reason, the subwoofer low  
pass filter cannot be turned off (the slope  
cannot be set to OFF.)  
Adjust the high pass filter (H.P.F.) and low pass  
filter (L.P.F.) and set the slope (filter response  
attenuation slope) for the different bands.  
Make the adjustments according to the playable  
frequency ranges and frequency responses of  
the connected speakers.  
Cutoff frequency  
adjustment range  
(1/6 octave steps)  
Slope adjustment  
H.P.F.  
L.P.F.  
H.P.F.  
L.P.F.  
Front 1  
(Front speaker 1)  
Select TWEETER  
6/12/18/  
24/30dB/  
Filter OFF  
1kHz –  
18kHz  
1.1kHz – 6/12/18/  
20kHz 24/30dB  
Front 1  
(Front speaker 1)  
Select FULL RANGE  
6/12/18/  
24/30dB/  
Filter OFF  
6/12/18/  
22Hz –  
20Hz –  
18kHz  
24/30dB/  
20kHz  
Filter OFF  
6/12/18/  
24/30dB/  
Filter OFF  
6/12/18/  
22Hz –  
20Hz –  
18kHz  
Front 2  
(Front speaker 2)  
24/30dB/  
20kHz  
Tweeters may be damaged if low frequency  
signals are input to them.  
Filter OFF  
6/12/18/  
24/30dB/  
Filter OFF  
6/12/18/  
22Hz –  
Rear  
(Rear speaker)  
20Hz –  
18kHz  
24/30dB/  
20kHz  
Filter OFF  
6/12/18/  
24/30dB/  
Filter OFF  
6/12/18/  
22Hz –  
Center*  
(Centre speaker)  
20Hz –  
18kHz  
24/30dB/  
20kHz  
Filter OFF  
6/12/18/  
24/30dB  
6/12/18/  
22Hz –  
20Hz –  
180Hz  
Sub.W  
(Subwoofer)  
24/30dB/  
200Hz  
Filter OFF  
*
If centre is set as subwoofer, the adjustment  
range changes to the range of subwoofer.  
15-EN  
Settings/Adjustments  
*1 When centre is set to subwoofer, it is not  
displayed.  
*2 When centre is set to subwoofer, it becomes  
Sub.W(L).  
*3 When centre is set to subwoofer, it becomes  
Sub.W(R).  
X-OVER  
CHANNEL  
ENTER  
5
6
Turn the Rotary encoder to adjust the H.P.F.  
cutoff frequency, then press the ENTER button.  
The adjustable bands differ according to the  
channel (speaker).  
Rotary encoder  
X –  
O
V EPR F r o n t 2 1/2  
HP f c : 3 5 0  
HP s l o p e : 1 2  
L P f c : 1 . 8 k  
X-OVER adjustment  
L P s  
I
o p e : 6  
This section describes the procedure for making  
the X-OVER adjustment. Before performing this  
procedure, see X-OVERon page 15.  
The SLOPE to FLAT operation from the head unit  
may not be performed depending on the head  
unit combination.  
Turn the Rotary encoder to adjust the H.P.F.  
slope, then press the ENTER button.  
To set filter off (slope off), press and hold the X-  
OVER button for at least 2 seconds.  
X –  
O
V EPR F r o n t 2 1/2  
HP f c : 3 5 0  
1
2
3
Check that the defeat mode is off.  
(See page 28.)  
HP s l o p e : 1 8  
L P f c : 1 . 8 k  
L P s  
I
o p e : 6  
Press the X-OVER button to set the X-OVER  
adjustment mode.  
7
8
Next, make the adjust for the L.P.F. in the same  
way as in steps 5 and 6.  
Press and hold the CHANNEL button for at least  
2 seconds and select L and R (LR)or L or R.  
L and R (LR)  
L or R  
Turn the Rotary encoder to adjust the level,  
then press the CHANNEL button.  
(factory default)  
Press the ENTER button to return to step 5.  
L and R (LR):Sets the same adjustment values  
for the left and right channels.  
The level can be adjusted between 12 and 0.  
L or R:  
Different adjustment values can be  
set for the left and right channels.  
X –  
O
V EPR F r o n t 2 2/2  
L e v e l :  
4
Press the CHANNEL button to select the desired  
channel, then press the ENTER button.  
4 d B  
When L and R (LR)is selected:  
Cente*r1  
9
Repeat steps 4 to 8 to adjust other channels.  
Front 1 Front 2 Rear  
Sub. W  
10 Once the adjustments are completed, press the  
When L or Ris selected:  
X-OVER button.  
Front 1 L Front 1 R Front 2 L Front 2 R  
*3  
*2  
Sub. W  
Center  
Rear R Rear L  
16-EN  
Hint for adjusting the subwoofer  
If the subwoofer is installed on the rear deck,  
setting a gentle L.P.F. slope (for example 6 dB/  
oct.) makes the sound localization more to the  
rear. This can also affect the acoustic  
localization of the front.  
Hints for adjusting the high range  
Depending on the speaker, inputting low  
frequency component signals (about 2 kHz or  
less) with the H.P.F. adjustment could result in  
distortion. If so, set a steep slope (for example  
30 dB/oct.).  
When doing so, adjust so that the mid and high  
range sounds do not separate.  
Normally use with the L.P.F. off. If the high range  
is too strong, we recommend adjusting for a  
gentle slope.  
Hint for adjusting the low range  
When a subwoofer is connected and you are  
using a speaker with a low range of under 10 or  
12 cm (3-15/16or 4-3/4), setting the low range  
H.P.F. to OFFcan result in distortion when low  
frequency components are input.  
If so, set the H.P.F. slope to a value suited for  
the speakers frequency response.  
NOTES  
In order to protect the speakers, if Tweeter is selected  
in Front 1, there is no filter OFF (slope OFF) setting  
for H.P.F.  
For the same reason, the subwoofer low pass filter  
cannot be turned off (the slope cannot be set to  
OFF.)  
When the speaker is set to the OFFmode, the X-  
OVER for that speaker is ineffective. Refer to  
Setting the speakers(page 4).  
Check the playback frequencies of the connected  
speakers before adjusting.  
After making the settings, we recommend storing  
them in the memory. For instructions, see page 28.  
17-EN  
Settings/Adjustments  
FM: MX1 to 3 and OFF  
The medium to high frequencies become  
more clear, and produces well balanced  
sound in all the bands.  
CD: MX1 to 3 and OFF  
ENTER  
CD mode processes a large quantity of data.  
This data is used to reproduce the sound  
cleanly by making use of the data quantity.  
MP3/DAB: MX1 to 3 and OFF  
This corrects information that was omitted at  
the time of compression. This reproduces a  
well-balanced sound close to the original.  
DVD/Video CD: MOVIE MX 1~2, MUSIC, OFF  
MOVIE MX 1~2: The dialogues of movies are  
played with greater clarity.  
B.C.  
MX  
Rotary encoder  
MUSIC: Discs containing music clips are  
played with a more dynamic sound.  
AUX: MP3, MUSIC, MOVIE, OFF  
Choose the MX mode (MP3, MUSIC, or  
MOVIE) that corresponds to the media  
connected.  
MX settings  
MX (Media Xpander) makes vocals or  
instruments sound distinct regardless of the  
music source. The radio, CD, and MP3, will be  
able to reproduce the music clearly even in cars  
with a lot of road noise.  
4
Once the settings are completed, press the MX  
button.  
NOTES  
Operations cannot be performed when the defeat  
mode (page 28) is on.  
Each music source, such as radio, CD, and MP3 can  
have its own MX setting.  
If MX OFFis set in step 2, the MX mode is set to  
off for all music sources.  
When Autohas been set as the MX mode  
setting (see page 27) while using the PXA-  
H701 in combination with an Ai-NET head  
unit equipped with an automatic MX mode  
selection function (IVA-D300 series, etc.).  
In this case, the MX mode is selected  
1
automatically according to the music source on  
the head unit. The MX mode can be set from the  
PXA-H701 using the operation described below.  
When combining non Ai-Net head unit  
products  
2
When combining Ai-Net head unit products  
without MX interlocking function  
When combining Ai-Net head unit products  
(IVA-D300 series, etc.) with MX interlocking  
function considering that MX mode setting”  
(page 27) is set to Manual.  
In these cases, the PXA-H701 is not interlocked  
with the head unit, therefore it is necessary to set  
the MX from the PXA-H701 with the operations  
below.  
1
2
Press the MX button to set the MX setting mode.  
In case of MX OFF, press and hold the MX  
button for at least 2 seconds to turn the MX  
mode on.  
3
Turn the Rotary encoder to select the desired  
mode, then press the ENTER button.  
When OFFis selected, the MX effect is  
turned off.  
The level for the currently selected music  
source (radio, CD, etc.) can be adjusted.  
1
2
Press the MX button to set the MX setting mode.  
In case of MX OFF, press and hold the MX  
button for at least 2 seconds to turn the MX  
mode on.  
18-EN  
3
4
Turn the Rotary encoder to select the source  
(media) you want to set, then press the ENTER  
button.  
Turn the Rotary encoder to select the desired  
mode, then press the ENTER button.  
For further information about setting mode, see  
step 3 of  
(page 18).  
1
NOTE  
This function is equipped to work anywhere in the  
world, and it is possible to set to XM. This mode is a  
specification developed for use abroad, but like MP3/  
DAB, can have the same effect as MX. If set to  
MD, it also has the same effect as MP3/DAB.  
5
6
To set other sources (media), press the MX  
button and return to step 3.  
Once the settings are completed, press the MX  
button repeatedly.  
NOTES  
Operations cannot be performed when the defeat  
mode (page 28) is on.  
The source (media), such as radio, CD, and MP3 can  
be set.  
• “MX OFFcan be set in step 2.  
BASS COMP. setting  
The sound of the low frequencies can be  
adjusted to suit your tastes.  
1
2
3
Check that the defeat mode is off.  
(See page 28.)  
Press the B.C. button to set the BASS COMP.”  
setting mode.  
In case of BASS COMP. OFF, press and hold  
the B.C. button for at least 2 seconds to turn the  
BASS COMP. mode on.  
4
5
Turn the Rotary encoder to select the desired  
mode, then press the ENTER button.  
As the bass level increases in order of BASS  
COMP. 1, BASS COMP. 2, BASS COMP. 3, you  
can enjoy listening to the powerful sound.  
Once the settings are completed, press the B.C.  
button.  
NOTE  
BASS COMP. OFFcan be set in step 3.  
19-EN  
Using Dolby Surround  
* If DOLBY PL II MUSIC is selected, the  
centre width can be adjusted with following  
operations.  
This function offers the optimum vocal position  
by adjusting the centre channel position  
between the centre speaker and the L/R  
speaker. (The adjustments established in  
Adjusting the acoustic image(page 24) are  
ineffective while this function is activated.)  
1) After selecting DOLBY PL II MUSIC, within  
ENTER  
15 seconds, press and hold the  
PLII/  
PLII/  
REAR FILL  
REAR FILL button for at least 2 seconds.  
2) Turn the Rotary encoder to select Center  
Width ONor Center Width OFF, then  
press the ENTER button.  
DISP  
Rotary encoder  
When the setting is turned ON, the optimum  
vocal position is offered by adjusting the  
centre channel position between the centre  
speaker and the L/R speaker.  
Using the Pro Logic II mode  
With the PXA-H701, Pro Logic processing can be  
conducted on the music signals recorded on two  
channels to achieve Dolby Pro Logic II surround  
sound. For two-channel Dolby Digital and DTS  
signals, there is also a REAR FILLfunction for  
outputting the signals of the front channel to the  
rear channel.  
3) Turn the Rotary encoder to adjust the level,  
then press the ENTER button.  
The level can be adjusted between 0 to 7.  
When the level increases, the centre channel  
position moves from the centre speaker  
position to both side.  
4) After the setting, press and hold the  
PLII/REAR FILL button for at least 2  
seconds.  
1
Press the  
the desired mode.  
The setting mode is cancelled if no operation is  
performed within 15 seconds after the mode is  
selected.  
PLII/REAR FILL button and select  
NOTES  
Avoid stopping, pausing, switching the disc, cueing,  
fast-forwarding or switching the audio channel of the  
player while making this adjustment. The setting is  
cancelled if the decode mode is switched.  
This adjustment is ineffective if the centre speaker is  
set to OFFor Sub.Win the speaker setup  
settings.  
DOLBY PL II MOVIE DOLBY PL II MUSIC  
OFF  
REAR FILL  
2
Once the settings are completed, press the DISP  
button.  
NOTES  
DOLBY PL II MOVIE: Suits the stereo TV  
shows and all programs  
encoded in Dolby  
This function only works with two-channel signals.  
This operation is ineffective when 5.1-channel DTS  
or Dolby Digital signals are input.  
• “REAR FILLfunction  
Surround. It improves  
the sound field  
directivity to near that of  
discrete 5.1-channel  
sound.  
Depending on the input signals, the sound may only  
be output from the front speakers. In this case, the  
REAR FILLfunction can be used to output signals  
from the rear speakers as well.  
If the setting of REAR FILL is made when REAR MIX  
is ON, sound is unchanged in the rear fill setting  
because REAR MIX is given priority during 2  
channel decoder other than linear PCM.  
For linear PCM signals, the voice is output from the  
rear speaker regardless of the REAR FILL and REAR  
MIX setting.  
DOLBY PL II MUSIC: Can be used for all  
stereo music  
recordings, and  
provides a wide, deep  
sound field.  
Once the settings are made, we recommend storing  
them in the memory. See page 28 for instructions.  
20-EN  
Adjustment procedure for Dolby Surround  
Make the adjustments described below in order to reproduce Dolby Digital and DTS sound with greater  
accuracy.  
Adjustment procedure  
Speaker setup (page 22)  
(Turning the speakers to be used on and off and setting their response)  
1
Adjusting the speaker levels (page 22)  
(Adjusting the signal output level to the various speakers)  
2
Mixing bass sound to the rear channel (page 23)  
(Achieving smooth sound in the rear seat by mixing the front audio  
signals with the rear speaker signals)  
3
Adjusting the acoustic image (page 24)  
(Adjusting the acoustic image to achieve a sound as if the centre  
speaker were directly in front of the listener)  
4
Achieving powerful high volume sound (page 25)  
(Achieving energetic sound with even greater power, like the sound in a  
movie theater)  
5
Adjusting the DVD level (page 25)  
(Adjust the volume (signal level) in the Dolby Digital, Pro Logic II, DTS  
and PCM modes.)  
6
Storing settings in the memory (page 28)  
(Storing all the settings and adjustments made on the PXA-H701 (not  
only the above settings/adjusts) in the memory)  
7
NOTE  
In case of combining the Automatic adjustments etc.  
We recommend to make the Automatic adjustments before the Dolby Surround adjustments.  
21-EN  
Using Dolby Surround  
OFF:  
When no speaker is connected  
SMALL:  
When a speaker that cannot play low  
frequencies (80 Hz or less) is connected  
LARGE:  
CHANNEL  
ENTER  
When a speaker that can play low frequencies  
(80 Hz or less) is connected  
*1: It is not possible to set the front speakers to  
OFF.  
*2: If the front speakers are set to SMALL, the  
rear and centre speakers cannot be set to  
LARGE.  
SETUP  
Rotary encoder  
6
Press the SETUP button repeatedly to quit the  
setup mode.  
NOTES  
Speaker setup  
If the centre speaker is turned OFF, the centre  
channel's audio signals are added to the audio  
signals output from the front speakers.  
If you set the speaker response to OFF, also set  
the speaker setting to OFF. (See page 4.)  
Perform the setup for all the speakers (Front,  
Center,Rearand Sub. W). If not, the sound  
may not be balanced.  
When centre is set to subwoofer, the setting is  
ineffective even if centre is set with this function.  
Once the settings are made, we recommend storing  
them in the memory. See page 28 for instructions.  
Through changing the settings on each speaker, a  
change in the output of the other speakers may occur  
due to the setting requirements.  
When using the PRO LOGIC II, if the rear speaker is  
set to LARGE, then there will be no output from  
the sub-woofer.  
The PXA-H701 can be set according to the  
playable frequency range of your speakers.  
Check the playable frequency range of the  
speakers (not including the subwoofer) before  
performing this operation to verify whether the  
speakers can play low frequencies (of about 80  
Hz or less).  
NOTE  
Avoid stopping, pausing, switching the disc, cueing,  
fast-forwarding or switching the audio channel of the  
player while making this adjustment. The setting is  
cancelled if the decode mode is switched.  
1
2
3
Press the SETUP button.  
The setup mode is set.  
Adjusting the speaker levels  
Use the PXA-H701s test tones to make the  
volume adjustments of the different speakers.  
When levels are equal, a strong sense of  
presence can be heard from the different  
speakers at the listening position.  
Turn the Rotary encoder to select the 5.1CH  
SETUPmode, then press the ENTER button.  
Turn the Rotary encoder to select the  
SPEAKER SETUP, then press the ENTER  
button.  
NOTE  
Avoid stopping, pausing, switching the disc, cueing,  
fast-forwarding or switching the audio channel of the  
player while making this adjustment. The setting is  
cancelled if the decode mode is switched.  
4
5
Press the CHANNEL button to select the  
speaker, then press the ENTER button.  
Front  
Center  
Rear  
Sub. W  
1
2
3
Press the SETUP button.  
The setup mode is set.  
Turn the Rotary encoder to select the speaker  
property, then press the ENTER button.  
Repeat steps 4 and 5 to set the various items.  
Turn the Rotary encoder to select the 5.1CH  
SETUPmode, then press the ENTER button.  
1
2
*
*
OFF  
SMALL  
LARGE  
Turn the Rotary encoder to select OUTPUT  
LEVEL, then press the ENTER button.  
(Subwoofer is only ON/OFF.)  
22-EN  
4
Turn the Rotary encoder to select Auto, then  
press the ENTER button. Test tone output is  
repeated for each of the different speaker  
channels. They will be repeated in the order  
shown below.  
Mixing bass sound to the rear channel  
This function mixes the front channel audio  
signals to the audio signals output from the rear  
speakers, improving the sound in the vehicles  
rear seat.  
If no operation is performed for 2 seconds, the  
channel switches to the next channel.  
NOTE  
L (Left front)  
C (Center) R (Right front)  
RS (Right surround)  
Avoid stopping, pausing, switching the disc, cueing,  
fast-forwarding or switching the audio channel of the  
player while making this adjustment. The setting is  
cancelled if the decode mode is switched.  
LS (Left surround)  
5
6
While the test tones are being produced from the  
speakers, turn the Rotary encoder to adjust so  
that the volume of the different speakers is  
equal.  
1
2
3
4
Press the SETUP button.  
The setup mode is set.  
The adjustment range for the different  
speakers is 10 dB.  
Turn the Rotary encoder to select the 5.1CH  
SETUPmode, then press the ENTER button.  
Adjust based on the front speakers.  
Turn the Rotary encoder to select REAR MIX,  
then press the ENTER button.  
Press the SETUP button repeatedly to quit the  
setup mode.  
Turn the Rotary encoder to select REAR MIX  
ONor REAR MIX OFF, then press the ENTER  
button.  
When set to ON, the front audio signals are  
mixed into the audio signals output from the rear  
speakers.  
Adjusting the level for individual speakers  
(manual)  
1) At step 4 above, select Manual, then press the  
ENTER button.  
2) Press the CHANNEL button or ENTER button to  
select the speaker you wish to adjust.  
3) Turn the Rotary encoder to adjust the output  
level.  
4) Repeat steps 2) and 3) above to adjust the levels  
of the different speakers.  
5) Press the SETUP button again to quit the setup  
mode.  
5
6
Turn the Rotary encoder to adjust the level,  
then press the ENTER button.  
The level can adjusted in five steps: 6, 3, 0, +3  
and +6. The higher the level, the more bass is  
output from the rear speakers. (The effect differs  
according to the software (DVD, etc.).)  
Once the settings are completed, press the  
SETUP button repeatedly to quit the setup  
mode.  
NOTES  
If a speaker is set to the off mode, that speakers level  
adjustment cannot be made.  
NOTES  
Refer to Speaker setup(page 22).  
Once the settings are made, we recommend storing  
them in the memory. See page 28 for instructions.  
This adjustment is ineffective when the rear speaker  
setup setting is set to OFF.  
For linear PCM signals, the voice is output from the  
rear speaker regardless of the REAR FILL and REAR  
MIX setting.  
Once the settings are made, we recommend storing  
them in the memory. See page 28 for instructions.  
23-EN  
Using Dolby Surround  
5
6
Turn the Rotary encoder to adjust the level,  
then press the ENTER button.  
The level can be adjusted within the range of 5  
to +5. The higher the level, the more the position  
of the centre speaker is shifted to the sides.  
ENTER  
Once the settings are completed, press the  
SETUP button repeatedly to quit the setup  
mode.  
NOTES  
This adjustment is ineffective if the centre speaker is  
set to OFFor Sub.Win the speaker setup  
settings.  
SETUP  
Rotary encoder  
Once the settings are made, we recommend storing  
them in the memory. See page 28 for instructions.  
Adjusting the acoustic image  
In most installations, the centre speaker must be  
placed directly between the front passenger and  
driver. Using this function, the centre channel  
information is distributed to the left and right  
speakers. This creates an acoustic image  
simulating a centre speaker directly in front of  
each listener. Adjusting the centre width in  
DOLBY PL II MUSIC (see Using the Pro Logic II  
mode, page 20), makes this function ineffective.  
NOTE  
Avoid stopping, pausing, switching the disc, cueing,  
fast-forwarding or switching the audio channel of the  
player while making this adjustment. The setting is  
cancelled if the decode mode is switched.  
1
2
3
4
Press the SETUP button.  
The setup mode is set.  
Turn the Rotary encoder to select the 5.1CH  
SETUPmode, then press the ENTER button.  
Turn the Rotary encoder to select BI-  
PHANTOM, then press the ENTER button.  
Turn the Rotary encoder to select BI-  
PHANTOM ONor BI-PHANTOM OFF, then  
press the ENTER button.  
When set to ON, the centre channel  
information is distributed to the left and right  
speakers. This creates an acoustic image  
simulating a centre speaker directly in front of  
each listener.  
24-EN  
Achieving powerful high volume sound  
Adjusting the DVD level  
The volume (signal level) for the Dolby Digital,  
Pro Logic II, DTS and PCM modes can be set.  
With Dolby Digital, the dynamic range is  
compressed so that powerful sound can be  
achieved at regular volume levels. This  
compression can be cancelled to achieve an  
energetic sound with even greater power, like the  
sound in a movie theater.  
NOTE  
Avoid stopping, pausing, switching the disc, cueing,  
fast-forwarding or switching the audio channel of the  
player while making this adjustment. The setting is  
cancelled if the decode mode is switched.  
NOTE  
This function works only in the Dolby Digital mode.  
1
2
3
4
Press the SETUP button.  
The setup mode is set.  
1
2
3
4
Press the SETUP button.  
The setup mode is set.  
Turn the Rotary encoder to select the 5.1CH  
SETUPmode, then press the ENTER button.  
Turn the Rotary encoder to select the 5.1CH  
SETUPmode, then press the ENTER button.  
Turn the Rotary encoder to select the DVD  
LEVEL, then press the ENTER button.  
Turn the Rotary encoder to select LISTENING  
MODE, then press the ENTER button.  
Press the ENTER button to select the mode to  
be adjusted.  
Turn the Rotary encoder to select STANDARD”  
or MAXIMUM, then press the ENTER button.  
DOLBY D  
(DOLBY DIGITAL)  
DOLBY PL II  
DTS  
PCM  
STANDARD  
MAXIMUM  
5
6
Turn the Rotary encoder to adjust the level.  
STANDARD:  
For powerful sound at regular volume levels  
MAXIMUM:  
The level can be adjusted in the range of 5 to  
+5.  
For powerful sound at high volumes  
Repeat steps 4 and 5 to set the levels for the  
various modes.  
Once the settings are completed, press the  
SETUP button repeatedly to quit the setup  
mode.  
5
Press the SETUP button repeatedly to quit the  
setup mode.  
NOTES  
Keep the volume to a level at which sounds outside  
the vehicle can still be heard.  
This function may have no effect, depending on the  
type of software (DVD, etc.).  
Once the settings are made, we recommend storing  
them in the memory. See page 28 for instructions.  
NOTE  
After making the settings, we recommend storing them  
in the memory. For instructions, see page 28.  
25-EN  
Convenient Functions  
6
Press the SETUP button repeatedly to quit the  
setup mode.  
NOTE  
For connection with navigation, refer to the  
Installation and Connections(page 40).  
ENTER  
Linear PCM setting  
The output when playing discs recorded in linear  
PCM can be set to 2 or 3 channels.  
SETUP  
Rotary encoder  
1
2
3
Press the SETUP button.  
The setup mode is set.  
Navigation system voice guidance  
interruption (only when using the control  
unit sold separately)  
Turn the Rotary encoder to select the PCM  
MODE, then press the ENTER button.  
Turn the Rotary encoder to select 2ch Output”  
or 3ch Output, then press the ENTER button.  
When the navigation system is connected, make  
the navigation systems voice guidance  
messages to interrupt the PXA-H701, then  
output from the front speaker.  
2ch Output: 2ch output (L/R)  
3ch Output: 3ch output (L/R/CENTRE)  
4
Press the SETUP button repeatedly to quit the  
setup mode.  
1
2
3
Press the SETUP button.  
The setup mode is set.  
NOTE  
This PCM mode is ineffective if the centre speaker is set  
to OFFor Sub.Win the speaker setup settings.  
Turn the Rotary encoder to select the NAVI  
MIXmode, then press the ENTER button.  
Turn the Rotary encoder to select NAVI MIX  
ONor NAVI MIX OFF, then press the ENTER  
button.  
When ON is set, the navigation systems voice  
guidance messages interrupts the PXA-H701.  
4
5
Turn the Rotary encoder to adjust the MIX  
LEVEL(volume level of navigation voice), then  
press the ENTER button.  
The level can be adjusted from 1 to 15.  
Turn the Rotary encoder and set GUIDE  
CONT.to 1, then press the ENTER button.  
Do not use 2.  
26-EN  
Display settings  
MX mode setting (Ai-NET connection)  
Use this setting when using the PXA-H701 in  
combination with an Ai-NET head unit equipped  
with the automatic MX mode selection function  
(for example, IVA-D300 series).  
The displays contrast and LCD (negative/  
positive) can be adjusted.  
1
2
3
Press the SETUP button.  
The setup mode is set.  
When the MX mode is set to Auto, the MX  
settings of the head unit (the MX modes for the  
different music sources) are sent to the PXA-  
H701.  
Turn the Rotary encoder to select the DISPLAY  
SETUPmode, then press the ENTER button.  
Turn the Rotary encoder to adjust  
1
2
3
Press the SETUP button.  
The setup mode is set.  
CONTRAST, then press the ENTER button.  
Adjust the contrast (colour depth) between –  
8~+8 so that the display is easy to see.  
Turn the Rotary encoder to select the MX  
MODE, then press the ENTER button.  
4
5
Turn the Rotary encoder to perform the LCD  
MODEsetting, then press the ENTER button.  
Set the display to POSITIVE (Pos.)or  
Turn the Rotary encoder to select Autoor  
Manual, then press the ENTER button.  
NEGATIVE (Neg.)according to your tastes.  
Auto:  
Once the settings are completed, press the  
SETUP button repeatedly to quit the setup  
mode.  
When the PXA-H701 is used in combination  
with an Ai-NET head unit equipped with the  
automatic MX mode selection function (for  
example, IVA-D300 series), the MX settings  
of the head unit are sent to the PXA-H701.  
In addition, the MX mode switches  
automatically according to the music source  
selected by the head unit.  
Manual:  
Perform the MX operations on the PXA-  
H701.  
4
Press the SETUP button repeatedly to quit the  
setup mode.  
27-EN  
Convenient Functions  
Calling out stored values  
1
Press any button from 1 to 6 to select the preset  
memory you want to call out (MEMORY1to  
MEMORY6).  
In the preset memory, numerous settings/  
adjustments are stored. Therefore, it may take  
some time to access the stored preset memory.  
L
O
A
D
I NG  
DEFEAT  
1~6  
DISP  
PRESET  
MEMORY 1  
NOTE  
This operation can only be performed when the defeat  
mode is turned off.  
Storing settings in the memory  
This function can store up to 6 adjustments/  
settings.  
Defeat mode  
The following adjustments/settings are stored in  
a preset memory. For more details, see each  
page for the below items.  
1
Press the DEFEAT button.  
All properties are made flat.  
Page 4: Speakers Setting / Pages 6 - 11: Time  
Correction/Phase Switching/Bass Focus Setting /  
Pages 12 - 14: Equalizer Adjustment / Pages 15 -  
17: X OVER Adjustment / Pages 18 - 19: MX  
Settings / Page 19: BASS COMP. Setting / Page  
20: Pro Logic II Mode Setting/Centre Width  
Adjustment* / Pages 21 - 25: Dolby Surround  
adjustment* / Page 26: Linear PCM Setting*  
*Depending on the signal input, there is no  
effect.  
DEFEAT  
ON  
2
Press the DEFEAT button again to cancel.  
NOTES  
1
Make the adjustment or setting you want to store  
in the memory.  
The Parametric EQ, Graphic EQ, AUTO  
TCR, TCR/phase switching, MX, X-OVER”  
and BASS COMP. settingoperations cannot be  
performed when the defeat mode is turned on.  
To protect the speakers, the X-OVERsetting does  
not change.  
2
Press and hold any button from 1 to 6 for at least  
2 seconds to store the setting into preset  
memory (MEMORY1to MEMORY6).  
SAV  
E
PRESET  
MEMORY 2  
NOTES  
This operation can only be performed when the  
defeat mode is turned off.  
The stored contents will not be deleted even when the  
battery power cord is detached.  
28-EN  
Switching the display mode  
1
Press the DISP button to select the desired  
display mode.  
Spectrum analyzer display(1~3)  
Display OFF  
Input channel display  
Example of input channel (When  
monaural surround signal (s) is  
not inputted)  
Preset No.  
Equalizer setting  
P
I NPU T CH  
L
P2  
display  
C
R
Displays whether  
the current EQ  
setting is graphic  
EQ or parametric  
EQ.  
L F E  
S
L s  
R s  
G: Graphic EQ  
P: Parametric EQ  
The display changes according to the  
input signals. The indicated items are  
highlighted when there is no input.  
L:  
Left front channel  
R:  
C:  
Right front channel  
Centre channel  
Ls:  
Rs:  
S:  
Left surround channel  
Right surround channel  
Monaural surround signal  
LFE: Low frequency deep bass signal  
29-EN  
Installation and Connections  
Before installing or connecting the unit, please  
read the following and pages 2 and 3 of this  
manual thoroughly for proper use.  
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR  
STEERING SYSTEMS TO MAKE GROUND  
CONNECTIONS.  
Bolts or nuts used for the brake or steering systems (or  
any other safety-related system), or tanks should NEVER  
be used for installations or ground connections. Using  
such parts could disable control of the vehicle and cause  
fire etc.  
Warning  
DO NOT DISASSEMBLE OR ALTER.  
Doing so may result in an accident, fire or electric shock.  
DO NOT INSTALL THE MONITOR NEAR THE  
PASSENGER SEAT AIR BAG.  
USE THE CORRECT AMPERE RATING WHEN  
REPLACING FUSES.  
If the unit is not installed correctly the air bag may not  
function correctly and when triggered the air bag may  
cause the monitor to spring upwards causing an accident  
and injuries.  
Failure to do so may result in fire or electric shock.  
MAKE THE CORRECT CONNECTIONS.  
Failure to make the proper connections may result in fire  
or product damage.  
DO NOT BLOCK VENTS OR RADIATOR PANELS.  
Doing so may cause heat to build up inside and may result  
in fire.  
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE  
GROUND.  
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT  
OF THE REACH OF CHILDREN.  
(Check with your dealer if you are not sure.) Failure to do  
so may result in fire, etc.  
Swallowing them may result in serious injury. If  
swallowed, consult a physician immediately.  
BEFORE WIRING, DISCONNECT THE CABLE FROM  
THE NEGATIVE BATTERY TERMINAL.  
DO NOT INSTALL IN LOCATIONS WHICH MIGHT  
HINDER VEHICLE OPERATION, SUCH AS THE  
STEERING WHEEL OR SHIFT LEVER.  
Failure to do so may result in electric shock or injury due  
to electrical shorts.  
DO NOT ALLOW CABLES TO BECOME ENTANGLED  
IN SURROUNDING OBJECTS.  
Doing so may obstruct forward vision or hamper  
movement etc. and results in serious accident.  
Arrange wiring and cables in compliance with the manual  
to prevent obstructions when driving. Cables or wiring  
that obstruct or hang up on places such as the steering  
wheel, shift lever, brake pedals, etc. can be extremely  
hazardous.  
Caution  
HAVE THE WIRING AND INSTALLATION DONE BY  
DO NOT SPLICE INTO ELECTRICAL CABLES.  
EXPERTS.  
Never cut away cable insulation to supply power to other  
equipment. Doing so will exceed the current carrying  
capacity of the wire and result in fire or electric shock.  
The wiring and installation of this unit requires special  
technical skill and experience. To ensure safety, always  
contact the dealer where you purchased this product to  
have the work done.  
DO NOT DAMAGE PIPE OR WIRING WHEN  
DRILLING HOLES.  
USE SPECIFIED ACCESSORY PARTS AND INSTALL  
THEM SECURELY.  
When drilling holes in the chassis for installation, take  
precautions so as not to contact, damage or obstruct pipes,  
fuel lines, tanks or electrical wiring. Failure to take such  
precautions may result in fire.  
Be sure to use only the specified accessory parts. Use of  
other than designated parts may damage this unit  
internally or may not securely install the unit in place.  
This may cause parts to become loose resulting in hazards  
or product failure.  
30-EN  
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR  
PINCHED BY A SHARP METAL EDGE.  
Precautions  
Be sure to disconnect the cable from the () battery  
post before installing your PXA-H701. This will  
reduce any chance of damage to the unit in case of a  
short-circuit.  
Be sure to connect the colour coded leads according to  
the diagram. Incorrect connections may cause the unit  
to malfunction or damage to the vehicles electrical  
system.  
When making connections to the vehicles electrical  
system, be aware of the factory installed components  
(e.g. on-board computer). Do not tap into these leads to  
provide power for this unit. When connecting the  
PXA-H701 to the fuse box, make sure the fuse for the  
intended circuit of the PXA-H701 has the appropriate  
amperage. Failure to do so may result in damage to the  
unit and/or the vehicle. When in doubt, consult your  
ALPINE dealer.  
Route the cables and wiring away from moving parts (like  
the seat rails) or sharp or pointed edges. This will prevent  
crimping and damage to the wiring. If wiring passes  
through a hole in metal, use a rubber grommet to prevent  
the wires insulation from being cut by the metal edge of  
the hole.  
DO NOT INSTALL IN LOCATIONS WITH HIGH  
MOISTURE OR DUST.  
Avoid installing the unit in locations with high incidence  
of moisture or dust. Moisture or dust that penetrates into  
this unit may result in product failure.  
The PXA-H701 uses female RCA-type jacks for  
connection to other units (e.g. amplifier) having RCA  
connectors. You may need an adaptor to connect other  
units. If so, please contact your authorized ALPINE  
dealer for assistance.  
Wiring Connections  
Improper wiring connections could cause serious damage  
to your audio system. Be sure you:  
1. DO NOT connect () wires from left and right speakers  
together.  
2. DO NOT ground any speaker wires.  
3. DO NOT run wires where they may be pinched or cut.  
4. DO NOT leave bare speaker terminals exposed. They  
may contact the vehicle chassis and cause a short.  
Fuse  
When replacing the fuse(s), the replacement fuse must be  
of the same amperage as shown on the fuse holder. If the  
fuse(s) blows more than once, carefully check all  
electrical connections for shorted circuitry. Also have your  
vehicles voltage regulator checked. Do not attempt to  
repair the unit yourself; return it to your Alpine dealer or  
nearest Alpine Service Station for servicing.  
Temperature  
In order to ensure proper performance, be sure the  
temperature in your vehicle is above 14°F (10°C) and  
below 140°F (60°C) before turning your unit on. Good air  
circulation is essential to prevent internal heat build-up in  
the unit.  
31-EN  
Installation and Connections  
Accessories  
IMPORTANT  
Please record the serial number of your unit in  
Velcro fastener for  
mounting control  
unit or base unit  
Connection Cable  
Ai-NET cable  
the space provided below and keep it as a  
permanent record. The serial number plate is  
located on the bottom of the unit.  
x 2  
SERIAL NUMBER:  
Flanged self-  
tapping screw  
(M4 x 14)  
INSTALLATION DATE:  
INSTALLATION TECHNICIAN:  
PLACE OF PURCHASE:  
x 4  
To prevent external noise from entering the  
audio system.  
Locate the unit and route the leads at least 10 cm away  
from the car harness.  
Keep the battery power leads as far away from other  
leads as possible.  
Connect the ground lead securely to a bare metal spot  
(remove any paint, dirt or grease if necessary) of the  
car chassis.  
If you add an optional noise suppressor, connect it as  
far away from the unit as possible.  
Your Alpine dealer carries various noise suppressors.  
Contact them for further information.  
Your Alpine dealer knows best about noise prevention  
measures so consult your dealer for further  
information.  
32-EN  
3
4
Mount the control unit using the included screws.  
Installation  
Bracket  
Mounting the control unit (Sold Separately)  
Spacer  
CAUTION:  
Do not install the control unit near the air-bag of the  
front passengers seat.  
Control unit  
Confirm the installation location will be safe.  
Determine the mounting position on the  
dashboard. The area should be large enough to  
centre the unit and reasonably flat.  
Pan head screw  
(M3 x 5) x 2  
Mount the previously removed inner case into  
the dashboard. Slide the control unit into the  
Installation using Velcro fastener  
case.  
Dashboard  
Dashboard  
Velcro fastener  
Control unit  
Inner case  
1. Without separating the two pieces of Velcro  
fastener, peel off the paper backing on one side  
and place on the back of the control unit.  
2. Make sure the location selected is free from  
moisture or dirt. Peel off the backing paper from  
the other side of the Velcro fastener on the  
control.  
Face plate  
<JAPANESE CAR>  
1
After step 2 on Mounting other unitsof  
Mounting the control unit, remove the side  
bracket.  
3. Place the control unit on the mounting location  
and press the unit firmly to mount securely.  
Side bracket  
Mounting other units  
1
Remove the face plate.  
Side bracket  
2
Mount the control unit using the included screws.  
Bracket  
Spacer  
Face plate  
Control unit  
2
Use a screwdriver, etc., to slide the locking pin,  
then take out the inner case.  
Pan head screw  
(M3 x 5) x 2  
Inner case  
Locking pin  
33-EN  
Installation and Connections  
3
Mount the spacer and bracket to the control unit.  
Next, securely mount the factory brackets  
removed from the factory radio, to the control  
unit assembly.  
4
Mount the spacer on the control unit using the  
included screws.  
Spacer  
Flat head screws (M5 x 8)  
Control unit  
Pan head screw  
(M3 x 5) x 2  
5
Attach the flush mount brackets to the control  
unit using the included screws. Mount this  
assembly into the prepared cut-out.  
Flush mount  
Bracket  
Flush Mounting the control unit  
1
Make a cut-out approximately 178 (width) by 50  
(height) mm (7 inches by 2 inches) in size at your  
desired mounting location.  
Self-tapping screw  
(M2.6 x 8) x 4  
Face plate  
WARNING  
When making cut-outs, be careful not to  
damage pipes, tanks, electric wires, etc. Doing  
so could lead to accidents or fire.  
2
After step 2 on Mounting other unitsof  
Mounting the control unitpage 33, remove the  
side bracket.  
Side bracket  
Side bracket  
3
Remove the spacer from the bracket.  
Bracket  
Spacer  
34-EN  
Using the Mounting Screws (Supplied)  
The Base Unit can be mounted under the seat  
using the mounting screws.  
Mounting the base unit  
Velcro Fastener Mounting  
1
2
3
Decide on the installation location.  
The trunk, etc., is the best place.  
Mark the positions of the mounting screws at the  
chosen location.  
Drill 3 mm (1/8) holes or smaller.  
WARNING  
When making holes, be careful not to damage  
pipes, tanks, electric wires, etc. Doing so could  
lead to accidents or fire.  
4
Securely mount the unit using the four included  
flanged self-tapping screws (M4 x 14).  
Velcro fastener  
Flanged self-tapping  
screw (M4 x 14)  
Attach to the vehicle (such as under the  
dashboard).  
35-EN  
Installation and Connections  
Basic Connections Diagram  
CAUTION  
Do not connect or disconnect the  
display cable when the power of the  
unit is on.  
Display  
(Sold Separately)  
Terminal specifications  
Connect to:  
Head unit input terminal (optical digital input)  
Used for system expansion (Ai-NET head unit, etc.).  
Connect to an Ai-NET product  
using an optical fiber cable.  
Changer input terminal (optical digital input)  
Used for system expansion (Ai-NET changer, etc.).  
Connect to an Ai-NET product  
using an optical fiber cable.  
DVD player input terminal (optical digital input)  
Used for system expansion (DVD player, etc.).  
Connect to an Ai-NET product  
using an optical fiber cable.  
CENTER  
SELECTABLE  
SUBWOOFER  
(L)  
(R)  
CD/DVD H.U.  
DIGITAL  
CHG  
DVD  
1
DIGITAL  
2
DIGITAL  
3
MIC  
CONTROL UNIT  
FRONT  
1
FRONT  
2
REAR SUBWOOFER  
OUTPUT  
INPUT  
GUDE  
(L
ANALOG  
(R)  
1
AiNET IN  
ANALOG  
CHANGER IN  
ANALOG  
(FULL RANGE  
/TWEETER)  
POWER SUPPLY  
2
3
Cord colors and cord/terminal specifications  
Connect to:  
Remote ON cable  
Connect to the head unit for RCA connections.  
(Non Ai-NET connection)  
Blue/  
White  
Used for RCA connections.  
(Non Ai-NET connection)  
Blue/  
White  
Remote OUT cable  
Connect to the amplifier or other peripheral device.  
Used to add an amplifier.  
Guide control cable  
Used to interrupt the navigation systems sound.  
White/  
Green  
Connect to the navigation system.  
Fuse  
(3A)  
Battery power cable  
Power is supplied constantly to the PXA-H701 regardless  
of whether the engine key is on or off.  
Connect this lead to the positive (+) post of  
the vehicle's battery.  
Yellow  
Black  
Ground cable  
Connect securely to a metal part of the vehicles body.  
Connect to the vehicles body.  
Connect to an Ai-NET product using an Ai-NET cord.  
For connection to the PXA-H701, use the straight  
side.  
Changer input terminal (Ai-NET input)  
Used for system expansion (Ai-NET changer, etc.).  
Connect to an Ai-NET product using an Ai-NET cord.  
For connection to the PXA-H701, use the straight  
side.  
Ai-NET input terminal (Ai-NET input)  
Used for system expansion (DVD player, etc.).  
Audio input jacks (RCA inputs)  
Used to input the audio output signals of a head unit  
connected with RCA connections to the PXA-H701.  
Used for RCA connections.  
Connect to the head unit.  
Navigation audio input jack (RCA input)  
Used to input the audio output signals of a navigation  
system.  
Connect to the navigation system.  
Used for automatic adjustment.  
Microphone jack  
Use this to connect a microphone.  
Connect to the amplifier for the centre  
speaker or subwoofer.  
Centre speaker or subwoofer output jack (RCA output)  
Outputs signals for driving the centre speaker or subwoofer.  
Subwoofer output jack (RCA outputs)  
Outputs signals for driving the subwoofer.  
Connect to the amplifier for the subwoofer.  
Connect to the amplifier for the rear speaker.  
Rear speaker output jacks (RCA outputs)  
Outputs signals for driving the rear speakers.  
Connect to the amplifier for the front 2  
speaker.  
Front 2 speaker output jacks (RCA outputs)  
Outputs signals for driving the front 2 speakers.  
Front 1 speaker output jacks (RCA outputs)  
Outputs signals for driving the front 1 speakers.  
Connect to the amplifier for the front 1  
speaker.  
36-EN  
Examples of system expansion  
PXA-H701 + Ai-NET Compatible Head Unit + DVD Changer +  
Monitor + External Amplifier  
Fiber Optic Cable (Sold Separately)  
#
Remote Control  
Input Cable  
Remote Control Output Cable  
Monitor  
(White/Brown)  
(White/Brown)  
(TME-M790 etc.)  
To Video Input Jack  
RCA Connection Cable  
Fiber Optic Cable (Included with DVD Changer)  
To Video Output Jack  
DVD Changer  
Ai-NET Cable (Included with DVD Changer)  
Ai-NET Cable (Included)  
Ai-NET Compatible  
Head Unit  
CENTER  
SELECTABLE  
SUBWOOFER  
(L)  
(R)  
CD/DVD H.U.  
DIGITAL  
CHG  
DVD  
1
DIGITAL  
2
DIGITAL  
3
MIC  
System Switch  
CONTROL UNIT  
OUTPUT  
FRONT  
1
FRONT  
2
REAR SUBWOOFER  
INPUT  
GUIDE  
(L)  
ANALOG  
(R)  
1
AiNET IN  
ANALOG  
CHANGER IN  
ANALOG  
(FULL RANGE  
/TWEETER)  
POWER SUPPLY  
2
3
EQ  
/
DIV  
Blue/White  
Remote OUT Cable  
Blue/White  
To External Amplifier Remote ON Cable  
Not used in this system  
Not used in this system  
Remote ON Cable  
White/green  
Guide Control Cable  
Connect to a metal part of  
chassis body with a screw.  
Grounding Cable  
Battery  
Battery Power Cable  
Centre Output or Subwoofer Output (L)*  
Subwoofer Output or Subwoofer Output (R)*  
Rear Output (L)  
Rear Output (R)  
To External Amplifier  
Front 2 Output (L)  
Front 2 Output (R)  
Front 1 Output (L)  
Front 1 Output (R)  
* When the subwoofer is connected to the  
centre speaker output jack, it becomes  
subwoofer output (L or R).  
In this case, change the setting of the centre  
speaker to subwoofer in Setting the speakers”  
(page 4).  
NOTE  
NOTE  
Please observe the following when using Fiber Optic Cable.  
Do not coil the Fiber Optic Cable smaller than a 30mm radius.  
Do not place anything on top of the Fiber Optic Cable.  
# Used for connection to an optical digital  
compatible head unit.  
37-EN  
Installation and Connections  
PXA-H701 + Ai-NET Compatible Head Unit + CD Changer +  
External Amplifier  
##  
#
Fiber Optic Cable (Sold Separately)  
Fiber Optic Cable (Sold Separately)  
Ai-NET Cable (Included with CD Changer)  
Ai-NET Cable (Included)  
###  
Ai-NET Compatible  
CD Changer  
Ai-NET Compatible  
Head Unit  
CENTER  
SELECTABLE  
SUBWOOFER  
(L)  
(R)  
CD/DVD H.U.  
DIGITAL  
CHG  
DVD  
1
DIGITAL  
2
DIGITAL  
3
MIC  
System Switch  
CONTROL UNIT  
OUTPUT  
FRONT  
1
FRONT  
2
REAR SUBWOOFER  
INPUT  
GUIDE  
(L)  
ANALOG  
(R)  
AiNET IN  
ANALOG  
CHANGER IN  
ANALOG  
(FULL RANGE  
/TWEETER)  
POWER SUPPLY  
1
2
3
EQ  
/
DIV  
Blue/White  
Remote OUT Cable  
Blue/White  
To External Amplifier Remote ON Cable  
Not used in this system  
Not used in this system  
Remote ON Cable  
White/green  
Guide Control Cable  
Connect to a metal part of  
chassis body with a screw.  
Grounding Cable  
Battery  
Battery Power Cable  
Centre Output or Subwoofer Output (L)*  
Subwoofer Output or Subwoofer Output (R)*  
Rear Output (L)  
Rear Output (R)  
To External Amplifier  
Front 2 Output (L)  
Front 2 Output (R)  
Front 1 Output (L)  
Front 1 Output (R)  
* When the subwoofer is connected to the  
centre speaker output jack, it becomes  
subwoofer output (L or R).  
In this case, change the setting of the centre  
speaker to subwoofer in Setting the speakers”  
(page 4).  
NOTES  
#
When connecting a Optical Digital CD  
Changer  
## Used for connection to an optical  
digital compatible head unit.  
### When connecting a Optical Digital CD  
Changer, change the Digital/Analog  
switch of the CD Changer to 2”  
(Digital Output)  
NOTE  
Please observe the following when using Fiber Optic Cable.  
Do not coil the Fiber Optic Cable smaller than a 30mm radius.  
Do not place anything on top of the Fiber Optic Cable.  
1
2
38-EN  
PXA-H701 + Head Unit + Video Deck etc. + External Amplifier  
For connecting a head unit with which Ai-NET connections are not possible.  
Blue/White  
Blue/White  
Remote OUT cable  
Remote ON Cable  
*
RCA connection cable  
Head Unit  
TV Tuner,  
Video etc.  
Ai-RCA Conversion Cable  
(Sold Separately)  
RCA connection cable  
Audio  
Output  
CENTER  
SELECTABLE  
SUBWOOFER  
(L)  
(R)  
CD/DVD H.U.  
DIGITAL  
CHG  
DVD  
1
DIGITAL  
2
DIGITAL  
3
MIC  
CONTROL UNIT  
OUTPUT  
FRONT  
1
FRONT  
2
REAR SUBWOOFER  
INPUT  
GUIDE  
(L)  
ANALOG  
(R)  
1
AiNET IN  
ANALOG  
CHANGER IN  
ANALOG  
(FULL RANGE  
/TWEETER)  
POWER SUPPLY  
2
3
Blue/White  
Remote OUT Cable  
White/green  
To External Amplifier Remote ON Cable  
Not used in this system  
Guide Control Cable  
Connect to a metal part of  
chassis body with a screw.  
Grounding Cable  
Battery  
Battery Power Cable  
Centre Output or Subwoofer Output (L)*  
Subwoofer Output or Subwoofer Output (R)*  
Rear Output (L)  
Rear Output (R)  
To External Amplifier  
Front 2 Output (L)  
Front 2 Output (R)  
Front 1 Output (L)  
Front 1 Output (R)  
* When the subwoofer is connected to the  
centre speaker output jack, it becomes  
subwoofer output (L or R).  
In this case, change the setting of the centre  
speaker to subwoofer in Setting the speakers”  
(page 4).  
NOTE  
When using the PXA-H701 with a non-Ai-NET head unit, +12V is required on this line to turn on the equalizer. If your  
*
head unit does not have a remote-on or power-antenna turn-on wire, an SPST switch must be connected between an  
ignition source and this terminal. The PXA-H701 can then be turned on using this switch.  
The PXA-H701 can be used with any head unit. However, only an Alpine Ai-NET compatible head unit will be able to  
take full advantage of all the features and functions of this processor.  
39-EN  
Installation and Connections  
PXA-H701 + IVA-D300 series Head Unit + CD Changer +  
Navigation System + External Amplifier  
White/Green  
White/Green  
Guide Control Cable  
Guide Control Cable  
NTSC  
RGB  
VIDEO OUTPUT  
NAVIGATION  
INPUT  
Navigation  
NTSC VIDEO  
GUIDE OUTPUT OUTPUT RGB OUTPUT REMOTE INPUT  
KCE-900E  
(Sold Separately)  
RCA connection cable  
RGB Cable  
(Sold Separately)  
Fiber Optic Cable (Sold Separately  
)
IVA-D300 series  
Head Unit  
#
Fiber Optic Cable  
(Sold Separately)  
Ai-NET Cable  
(Included with CD Changer)  
Ai-NET Cable (Included)  
##  
Ai-NET Compatible  
CD Changer  
CENTER  
SELECTABLE  
SUBWOOFER  
(L)  
(R)  
CD/DVD H.U.  
DIGITAL  
CHG  
DVD  
1
DIGITAL  
2
DIGITAL  
3
MIC  
CONTROL UNIT  
OUTPUT  
FRONT  
1
FRONT  
2
REAR SUBWOOFER  
INPUT  
GUIDE  
(L)  
ANALOG  
(R)  
1
AiNET IN  
ANALOG  
CHANGER IN  
ANALOG  
(FULL RANGE  
/TWEETER)  
POWER SUPPLY  
2
3
Blue/White  
Remote OUT Cable  
Blue/White  
Remote ON Cable  
To External Amplifier Remote ON Cable  
Not used in this system  
Connect to a metal part of  
chassis body with a screw.  
Grounding Cable  
Battery  
Battery Power Cable  
* When the subwoofer is connected to the  
centre speaker output jack, it becomes  
subwoofer output (L or R).  
In this case, change the setting of the  
centre speaker to subwoofer in Setting  
the speakers(page 4).  
Centre Output or Subwoofer Output (L)*  
Subwoofer Output or Subwoofer Output (R)*  
Rear Output (L)  
Rear Output (R)  
To External  
Amplifier  
Front 2 Output (L)  
Front 2 Output (R)  
Front 1 Output (L)  
Front 1 Output (R)  
NOTE  
Also refer to the operating instructions of the KCE-900E. For  
details, contact your store of purchase or an Alpine Information  
Center.  
NOTES  
#
When connecting a Optical Digital CD  
Changer  
Please observe the following when using Fiber Optic  
Cable.  
## When connecting a Optical  
Digital CD Changer, change  
the Digital/Analog switch of  
the CD Changer to 2”  
Do not coil the Fiber Optic Cable smaller than a 30mm radius.  
Do not place anything on top of the Fiber Optic Cable.  
1
2
(Digital Output)  
40-EN  
Information  
Dolby Pro Logic II  
Terminology  
Dolby Pro Logic II provides multichannel surround  
sound from any 2 channel source. It reproduces  
extended bandwidth playback with 5.1 channels.  
This is made possible by an advanced matrix  
surround decoder. This new decoder is able to draw  
out spatial characteristics of the recording without  
adding tonal coloration or artificial delays that did not  
exist in the original.  
Dolby Digital  
Dolby Digital is a digital audio compression  
technology developed by Dolby Laboratories that  
allows large quantities of audio data to be efficiently  
recorded on discs. It is compatible with audio signals  
from mono (1 channel) all the way up to 5.1-channel  
surround sound. The signals for the different  
channels are completely independent, and since the  
sound is high quality digital there is no loss of sound  
quality.  
Linear PCM audio (LPCM)  
LPCM is a signal recording format used for music  
CDs. Whereas music CDs are recorded at 44.1 kHz/  
16 bits, DVDs are recorded at 48 kHz/16 bits to 96  
kHz/24 bits, thereby achieving higher sound quality  
than music CDs.  
Centre  
speaker  
Front  
speakers  
Rear  
speakers  
Subwoofer  
Speaker layout for enjoying  
Dolby Digital sound/DTS sound  
DTS  
This is a home-use digital sound format of the DTS  
Sound System. This is a high quality sound system,  
developed by Digital Theater Systems Corp for use  
in movie theatres.  
DTS has six independent sound tracks. The theater  
presentation is fully realized in the home and other  
settings. DTS is the abbreviation for Digital Theater  
Systems.  
41-EN  
Others  
Caution when connecting the DVA-5205 series/  
DVA-5200 series/DHA-S680 series  
In case of difficulty  
Although the adjustment screen such as EQ and  
TCR on the audio processor are available in DVA-  
5205 series/DVA-5200 series/DHA-S680 series,  
these adjustments cannot be made when they are  
connected to the PXA-H701.  
If you encounter a problem, please review the items  
in the following checklist. This guide will help you  
isolate the problem if the unit is at fault. Otherwise,  
make sure the rest of your system is properly  
connected or consult your authorized Alpine dealer.  
Set does not operate.  
Nothing appears on the display.  
Vehicles ignition key is turned off.  
- Turn the vehicles ignition key on.  
Sets power is not turned on.  
- Turn the vehicles ignition key on then turn on  
the power of the head unit.  
Power cord is not securely connected.  
- Connect the power cord securely.  
Fuse is blown.  
- Replace with a fuse of the specified capacity.  
Display mode is set to off.  
- Switch the display to another mode.  
(Page 29)  
Power is on but no sound is produced.  
Volume level is set to the minimum.  
- Increase the volume level. (Page 5)  
Input mode is set to a mode to which nothing is  
connected.  
- Set to a connected mode. (Page 5)  
No sound is produced from the speakers.  
Cords are not securely connected.  
- Connect the cords securely.  
Speaker is set to the off mode.  
- Set the speaker to the on mode. (Pages 4  
and 22)  
Speaker setup settings cannot be made.  
Front speakers are set to SMALL.  
- Set the front speakers to LARGE. (Page 22)  
Sound cannot be adjusted.  
Defeat is set to the on mode.  
- Set defeat to the off mode. (Page 28)  
42-EN  
<Components>  
Parts name  
Specifications  
Quantity  
Graphic EQ number of bands:  
Front (left and right)  
Rear (left and right)  
Centre  
31 bands  
31 bands  
31 bands  
10 bands  
Parts for mounting ................................ 1set  
Owners manual.................................... 1set  
Subwoofer  
Graphic EQ boost cut  
range:  
Due to continuous product improvement,  
specifications and design are subject to change  
without notice.  
The illustrations included in these instructions may  
appear different from the actual product due to  
printing conditions.  
9 dB  
Parametric EQ number of bands:  
Front/rear/centre 5 bands  
Subwoofer 2 bands  
Parametric EQ frequency:  
Front, Rear and Centre  
Band 1:  
Band 2:  
Band 3:  
Band 4:  
Band 5:  
20/22/25/28/31.5/36/40/45/50/56/  
63/71/80/90/100/110/125/140/160/  
180/200/220/250/280/315/360/400/  
450/500 (Hz)  
50/56/63/71/80/90/100/110/125/  
140/160/180/200/220/250/280/315/  
360/400/450/500/560/630/710/800/  
900/1k/1.1k/1.2k (Hz)  
125/140/160/180/200/220/250/280/  
315/360/400/450/500/560/630/710/  
800/900/1k/1.1k/1.2k/1.4k/1.6k/  
1.8k/2k/2.2k/2.5k/2.8k/3.2k (Hz)  
315/360/400/450/500/560/630/710/  
800/900/1k/1.1k/1.2k/1.4k/1.6k/  
1.8k/2k/2.2k/2.5k/2.8k/3.2k/3.6k/4k/  
4.5k/5k/5.6k/6.3k/7.1k/8k (Hz)  
800/900/1k/1.1k/1.2k/1.4k/1.6k/  
1.8k/2k/2.2k/2.5k/2.8k/3.2k/3.6k/4k/  
4.5k/5k/5.6k/6.3k/7.1k/8k/9k/10k/  
11k/12.5k/14k/16k/18k/20k (Hz)  
Manufactured under license from Dolby Laboratories.  
Dolby, Pro Logicand the double-D symbol are  
trademarks of Dolby Laboratories. Confidential  
unpublished works. ©1992-1997 Dolby Laboratories.  
All rights reserved.  
DTSand DTS Digital Surroundare registered  
trademarks of Digital Theater Systems, Inc.  
Subwoofer  
Band 1:  
20/22/25/28/31.5/36/40/45/50/56/  
63/71/80 (Hz)  
50/56/63/71/80/90/100/110/125/  
140/160/180/200 (Hz)  
Band 2:  
Parametric EQ boost cut  
range:  
9 dB  
Time correction control  
range:  
0 to 20 ms (0.05 ms steps)  
Frequency response: 10 Hz to 24 kHz  
S/N ratio:  
100 dB (IHF-A)  
Channel separation:  
Input sensitivity:  
80 dB  
850 mV (2V for analog 1 only)  
Subwoofer crossover: 20 to 200 Hz (1/6 oct. steps)  
Rated output:  
Input impedance:  
Output impedance:  
Weight:  
4V (with 10 k ohms load)  
10 k ohms or greater  
1 k ohm or less  
Control unit (sold separately)  
159 g (5 oz)  
Base unit  
1.1 kg (2 lbs. 6 oz)  
Dimensions  
Control unit (sold separately)  
Width  
Height  
Depth  
170 mm (6-3/4")  
46 mm (1-13/16")  
24 mm (15/16")  
Base unit  
Width  
Height  
Depth  
260 mm (10-3/16")  
40 mm (1-9/16")  
160 mm (6-1/4")  
43-EN  
R
Car Audio and Navigation Systems  
GERÄTE-PASS  
AUDIO SYSTEME  
Fahrzeugmarke:  
Typ:  
Amtl. Kennzeichen:  
Name des Halters:  
Straße:  
Wohnort:  
Bitte füllen Sie diesen Pass vollständig aus und bewahren Sie ihn  
außerhalb des Fahrzeugs auf:  
Im Falle eines Diebstahls wird für Sie die Schadensabwicklung mit der  
Versicherung einfacher, und Sie erleichtern der Polizei die Fahndung  
nach den Tätern.  
Händlerstempel  
Tips der Polizei:  
[ Stellen Sie Ihr Fahrzeug stets gut sichtbar ab.  
[
Verschließen Sie Türen, Fenster, Schiebedach und Kofferraum immer, auch bei nur kurzer Abwesenheit.  
[ Lassen Sie keine Wertsachen sichtbar im Auto liegen.  
[ Wird Ihr Fahrzeug aufgebrochen, wenden Sie sich sofort an die nächste Polizeidienststelle.  
[ Belassen Sie Ihr Fahrzeug nach einem Aufbruch im Originalzustand.  
[ Informieren Sie sich über technische Sicherungsmöglichkeiten bei einer kriminalpolizeilichen  
Beratungsstelle.  
Gerät 1  
Modell-Nr.:  
Hersteller:  
Seriennummer:  
A
L
Kaufdatum:  
Preis:  
Appendix  
Product Information Card Produkt-Informationskarte Carte dinformations sur  
Tarjeta de información del  
le produit  
producto  
English  
Deutsch  
Français  
Español  
Filling in this Product Information Card is  
voluntary. If you fill in this card and send  
it to Alpine, your data will be tabulated  
into reference data for future Alpine  
product development. In addition, in the  
future you may receive information about  
new products or Survey Mail requesting  
additional opinions about Alpine products  
or services. If you agree to the above  
term, please sign your name in the  
indicated space and return the card. Any  
additional comments or inquiries may be  
sent to : Person in charge of Customer  
Service department Alpine Electronics  
(Europe) GmbH.  
Das Ausfüllen dieser Produktinformations-karte  
ist freiwillig. Sollten Sie diese Karte  
En remplissant volontairement cette fiche,  
et en l’envoyant à Alpine, vous acceptez  
que ces informations soient utilisées par  
Alpine, dans le cadre de développement  
de nouveaux produits. Par ailleurs, vous  
autorisez Alpine à solliciter votre opinion  
par mailing sur de nouveaux produits ou  
services. Si vous acceptez les termes ci-  
dessus, veuillez signer cette carte à  
l’endroit indiqué, et nous la retourner.  
Tout autre commentaire ou demande doit  
être adressé à l’attention de: Responsable  
du service consommateur Alpine  
El envío de la información solicitada es  
voluntario. Si Vd. nos la remite, será  
utilizada de modo confidencial para el  
desarrollo de futuros productos Alpine. Si  
Vd. desea recibir información sobre  
nuevos productos de nuestra gama,  
indique su nombre en el espacio  
vervollständigen, so werden die Daten für  
zukünftige Produktentwicklungen von Alpine als  
Referenzdaten herangezogen. Ebenso können Sie  
in der Zukunft Informationen über neue Alpine  
Produkte erhalten oder uns auch Ihre Meinung  
über Alpine Produkte und Dienstleistungen im  
Rahmen von Kunden-befragungen mitteilen.  
Stimmen Sie dem Kontakt durch Alpine zu, so  
würden wir Sie bitten, in dem dafür vorgesehenen  
Feld zu unterschreiben und die Karte kostenfrei  
an uns zurückzuschicken. Zusätzliche  
Kommentare und Meinungen können Sie gerne  
an den zuständigen Kontakt im Kundendienst  
Alpine Electronics (Europe) GmbH senden.  
Frankfurter Ring 117, 80807 München, Germany  
Phone: 089-32 42 640  
designado y remítanos la tarjeta.  
Cualquier solicitud adicional puede ser  
enviada a : Persona responsable del  
Servicio de Atención al Cliente de Alpine  
Electronics (Europe) GmbH.  
Frankfurter Ring 117, 80807 München, Germany  
Phone: +49-(0)89-32 42 640  
Electronics (Europe) GmbH.  
Frankfurter Ring 117, 80807 München, Germany  
Phone: +49-(0)89-32 42 640  
Frankfurter Ring 117, 80807 München, Germany  
Phone: +49-(0)89-32 42 640  
Q1. PRODUCT PURCHASED  
1. Cassette Player  
2. CD Player  
Q1. Producto Comprado  
1. Radio/Cassette  
2. Radio/CD  
Q1. gekauftes Gerät  
1. Kassetten-Spieler  
2. CD-Spieler  
Q1. PRODUIT ACHETE  
1. Lecteur de cassette  
2. Lecteur de CD  
3. MD Player  
4. DVD Player  
5. CD Changer  
6. Amplifier  
3. Reproductor de MD  
4. Reproductor de DVD  
5. Cambiador de CD  
6. Amplificador  
3. MD-Spieler  
4. DVD-Spieler  
5. CD-Wechsler  
6. Verstärker  
3. Lecteur MD  
4. Lecteur DVD  
5. Changeur de CD  
6. Amplificateur  
7. Speaker  
7. Altavoz  
7. Lautsprecher  
7. Haut-parleur  
8. Subwoofer  
8. Subwoofer  
8. Subwoofer  
8. Haut-parleur de graves  
9. Station Multimedia  
10. Moniteur Vidéo  
11. Navigation  
12. Processeur/Egaliseur  
13. Changeur de CD/CD Vidéo  
14. Autre  
9. Monitor Controller  
10. Video Monitor  
11. Navigation  
12. Processor/Equalizer  
13. CD/Video CD Changer  
14. Other  
9. Monitor de control  
10. Monitor de video  
11. Sistema de navegación  
12. Procesador/Ecualizador  
13. Cambiador de CD/Video CD  
14. Otros  
9. Monitor-Controller  
10. Video-Monitor  
11. Navigationssystem  
12. Prozessor/Equalizer  
13. CD/Video-CD-Wechsler  
14. andere  
Q2. MODEL NUMBER:  
Q2. Modellnummer:  
Q2. NUMERO DU MODELE:  
Q2. Número de modelo:  
Q3. DATE OF PURCHASE:  
Q3. Fecha de compra:  
Q3. Kaufdatum:  
Q3. DATE DACHAT:  
Month:  
Year:  
Mes:  
Año:  
Monat:  
Jahr:  
Mois:  
Année:  
Q4. If navigation system, which  
Q4. En caso de sistema de  
navegación, ¿qué monitor?  
1. Alpine (N° de modelo)  
Q4. Falls Navigationssystem:  
Q4. Si cest un système de navigation,  
monitor?  
Welcher Monitor?  
1. Alpine (Modellnr.)  
2. Anderer Hersteller →  
(Herstellername)  
quel moniteur?  
1. Alpine (Model No.)  
2. Other (Brand Name)  
Q5. STORE TYPE WHERE  
1. Alpine (N° du modèle)  
2. Otros  
(Nombre de marca)  
2. Autre (Marque)  
Q5. TYPE DE MAGASIN OU VOUS  
AVEZ ACHETE LE PRODUIT:  
1. Spécialiste autoradio  
Q5. TIPO DE TIENDA DONDE  
Q5. Art des Geschäfts, in dem Sie das  
PURCHASED:  
1. Car Audio Specialist  
2. Audio/Video Store  
3. Electronics/Appliance Store  
4. Car Accessories Shop  
5. Other  
COMPRÓ:  
1. Especialista en audio de automóviles  
2. Tienda de audio/video  
3. Tienda de electrónica/electrodomésticos  
4. Tienda de accesorios automovilísticos  
5. Otros  
Gerät gekauft haben:  
1. Spezialist für Auto-Audioanlagen  
2. Audio/Video-Geschäft  
3. Elektrogeschäft  
4. Autozubehör-Geschäft  
2. Magasin audio/vidéo  
3. Magasin d’électronique/appareils  
4. Magasin daccessoires automobiles  
5. Autre  
5. Anderer Hersteller  
Q6. Art des Fahrzeugs, in das das  
Q6. Type of vehicle in which this unit is  
Q6. Tipo de vehiculo en que la unidad  
Q6. Type de véhicule dans lequel cet  
installed:  
está instalada:  
appareil est installé:  
Gerät installiert wurde:  
Make:  
Model:  
Model  
Year:  
Marca:  
Año de  
compra:  
Modelo:  
Año del  
modelo:  
Marque:  
Année  
dachat:  
Modèle:  
Année du  
modèle:  
Purchased  
Year:  
Marke:  
gekauft im  
Jahr:  
Modell:  
Baujahr:  
Q7. How was this vehicle purchased?  
1. Purchase  
2. Lease  
Q8. Purpose of buying this unit?  
1. Addition  
2. Replacement  
Q7. Comment avez-vous acheté ce  
véhicule?  
1. Achat  
2. Location-bail  
Q8. Pourquoi avez-vous acheté cet  
appareil?  
1. Addition  
Q7. ¿Cómo fue comprado este  
vehiculo?  
1. compra  
2. Leasing  
Q8. ¿Propósito de comprar esta  
unidad?  
1. Mejora del sistema  
2. Sustitución  
Q7. Wie haben Sie das Fahrzeug  
gekauft?  
1. Kauf  
2. Leasing  
Q8. Zweck des Kaufs dieses Geräts?  
1. Zusätzlich  
2. Austausch  
Previous brand replaced?  
2. Remplacement  
1. Factory installed  
2. Alpine  
3. Other (Brand Name)  
Q9. Have you purchased Alpine  
products before?  
1. First time  
Marke des ausgetauschten Geräts?  
Marque précédente remplacée?  
¿Sustitución de marca anterior?  
1. Serienmäßige Ausstattung  
2. Alpine  
3. Anderer Hersteller →  
(Herstellername)  
Q9. War dies das erste Mal, dass Sie  
ein Alpine-Gerät gekauft haben?  
1. Erstes Mal  
1. Installée en usine  
2. Alpine  
3. Autre (Marque)  
Q9. Aviez-vous déjà acheté des  
produits Alpine?  
1. Première fois  
1. Instalado en la fábrica  
2. Alpine  
3. Otros  
(Nombre de marca)  
Q9. ¿Ha comprado Vd. productos  
Alpine anteriormente?  
1. Primera vez  
2. Dos o más veces  
Q10.Cuando usted compró esta unidad  
2. Two or More times  
Q10.When you purchased this Alpine  
unit, did you compare it with other  
2. Deux fois ou plus  
Q10.Lorsque vous avez acheté ce  
2. Zweites Mal oder öfter  
Q10.Haben Sie dieses Alpine-Gerät vor  
brand?  
1. Yes (Brand Name)  
2. No.  
Q11.GENDER  
1. Male  
2. Female  
Q12.AGE  
Q13.MARITAL STATUS  
1. Single  
2. Married  
produit Alpine, lavez-vous  
Alpine, ¿la comparó con otros  
dem Kauf mit Geräten anderer  
comparé à une autre marque?  
1. Oui (Marque)  
2. Non  
Q11.SEXE  
1. Masculin  
2. Féminin  
Q12.AGE  
Q13.SITUATION DE FAMILLE  
1. Célibataire  
fabricantes?  
1. Si (Nombre de marca)  
2. No  
Q11.SEXO  
1. Masculino  
2. Femenino  
Q12.Edad  
Q13.Estado civil  
1. Soltero  
Hersteller verglichen?  
1. Ja (Herstellername)  
2. Nein  
Q11.Geschlecht  
1. Männlich  
2. Weiblich  
Q12.Alter  
Q13.Familienstand  
1. Ledig  
2. Verheiratet  
Q14.Beruf  
1. Selbständige/Firmeninhaber/freiberuflich  
Tätige  
2. Leitende Angestellte  
3. Sonstige Angestellte  
4. Beamte  
5. Schulbildung  
6. Studium  
7. Sonstige  
Q14.OCCUPATION  
1. Company Owner/Self-employed/  
Freelance  
2. Marié  
2. Casado  
Q14.PROFESSION  
1. Entrepreneur/Travailleur indépendant/  
Free-lance  
2. Directeur  
3. Employé de bureau  
4. Fonctionnaire  
5. Educateur  
6. Etudiant  
7. Autre  
Q15.Commentaires  
Q14.Ocupación  
1. Propietario de empresa/Autónomo/  
Profesional independiente  
2. Gerente  
3. Empleado de compañia  
4. Empleado público  
5. Profesor  
6. Estudiante  
7. Otros  
Q15.Comentarios  
2. Manager  
3. Company Employee  
4. Civil Servant  
5. Educator  
6. Student  
7. Other  
Q15.Comments  
Q15.Kommentar:  
Scheda informazioni  
prodotto  
Italiano  
La compilazione di questa formulario è  
volontaria. Se compilate questo formulario,  
ritornandolo ad Alpine, i Vostri dati saranno  
raccolti in un file di riferimento per lo sviluppo  
dei nuovi prodotti Alpine. In aggiunta Voi potrete  
ricevere in futuro informazioni riguardanti i nuovi  
prodotti o la richiesta di una Vostra opinione  
circa i prodotti o i servizi forniti da Alpine. Se  
siete d’accordo, Vi preghiamo di ritornarci il  
formulario completato negli appositi spazi con i  
Vostri dati. In caso desideriate fornire altri  
commenti o richiedere informazioni aggiuntive,  
potete indirizzare il tutto a : Responsabile  
dipartimento Servizio Clienti Alpine Electronics  
(Europe) GmbH.  
Frankfurter Ring 117, 80807 München, Germany  
Phone: +49-(0)89-32 42 640  
Q1. PRODOTTO ACQUISTATO  
1. Lettore di cassette  
2. Lettore CD  
3. Lettore MD  
4. Lettore DVD  
5. CD Changer  
6. Amplificatore  
7. Altoparlante  
8. Subwoofer  
9. Radio Monitor  
10. Monitor video  
11. Sistema di navigazione  
12. Processore/equalizzatore  
13. Cambia CD/Video CD  
14. Altro  
Q2. NUMERO MODELLO:  
Q3. DATA DI ACQUISTO:  
I agree to the above stated terms of the Alpine Product Information Card.  
Ich stimme dem Kontakt durch Alpine für Informations- und Befragungszwecke zu.  
Jaccepte les termes de cette carte dinformation produit Alpine.  
Estoy conforme con los términos de la tarjeta de información sobre producto de Alpine.  
Accetto i termini della scheda informazioni prodotti Alpine.  
Mese:  
Anno:  
Q4. In caso di acquisto di un sistema di  
navigazione, quale monitor  
possiede?  
1. Alpine (No. Modello)  
2. Altro Nome marca  
Q5. NEGOZIO DI ACQUISTO:  
1. Specialista Car Stereo  
2. Negozio di audio/video  
3. Negozio di elettronica/elettrodomestici  
4. Negozio accessori automobile  
5. Altro  
(Date/Datum/Date/Fecha/Data)  
(Signature/Unterschrift/Signature/Firma)  
Q6. Tipo di veicolo posseduto:  
Marca:  
Anno  
Modello:  
Anno  
Name/Nom/Nombre/Nome  
acquisto:  
Q7. Modalità acquisto  
1. Acquisto  
modello:  
(First Name/Vorname/Prénom/Primer nomble/Nome)  
2. Leasing  
(Surname/Familienname/Nom de famille/Apellido/Cognome)  
Q8. Scopo acquisto  
1. Aggiunta  
Home Address/Privatanschrift/Adresse/Dirección/Indirizzo  
2. Sostituzione  
(Street/Straße/Rue/Calle/Via) (Post Code/Postleitzahl/Code postal/Código postal/Codice postale)  
Marca sostituita  
(Town/City/Stadt/Ville/Ciudad/Città) (Country/Land/Pays/País/Paese)  
1. Installato di fabbrica  
2. Alpine  
3. Altro (Nome marca)  
Telephone Number:  
Q9. Avevate già acquistato prodotti  
Alpine?  
1. No  
2. Due o tre volte  
Q10.Nell’acquistarlo, avete paragonato  
questo prodotto ad un’altra marca?  
1. Si (Nome marca)  
2. No  
Q11.SESSO  
1. Maschile  
2. Femminile  
Q12.ETÀ  
Q13.STATO CIVILE  
1. Celibe/nubile  
2. Coniugato/coniugata  
Q14.LAVORO  
1. Proprietario di azienda/artigiano/libero  
professionista  
2. Manager  
3. Impiegato  
E-Mail/Correo electrónico:  
NO.  
Q1Other  
Q2  
Q6  
Month  
Year  
NO.1. Model No.  
Q3  
Q4  
NO.2. Brand Name  
Make:  
Purchased Year:  
Model:  
NO.  
Q5Other  
ModelYear:  
NO.  
1
Previous brand replaced.  
1. 2. 3.  
Brand Name  
Q7  
Q8  
2
NO.  
NO.  
1
2
Brand Name  
Q9  
Q10  
Q11  
NO.  
NO.  
NO.  
Other  
NO.  
4. Impiegato statale  
5. Insegnante  
6. Studente  
7. Altro  
Q15.Commenti  
Q12  
Q13  
Q14  
years old  
Comments  
Q15  

Alpine Electronics Car Video System IVA W205R User Manual
AudioBahn MULTIFUNCTIONAL SOURCE UNIT A3351 User Manual
Blaupunkt CASABLANCA RCM 85 User Manual
Blaupunkt RDM 169 US User Manual
Canon Camera Accessories REBELT2I User Manual
Canon Camera Lens 86 User Manual
Cerwin Vega CV 5000 User Manual
Focal Power 6 KPS User Manual
GE 2 9079 User Manual
Infinity Softworks Palm Computing Platform User Manual