Alpine IVA C801 User Manual

R
EN  
FR  
ES  
IVA-C801  
CVA-1006  
Mobile Multimedia Station  
• OWNER'S MANUAL  
Please read before using this equipment.  
• MODE D'EMPLOI  
Veuillez lire avant d'utiliser cet appareil.  
• MANUAL DE OPERACIÓN  
Léalo antes de utilizar este equipo.  
ALPINE ELECTRONICS, INC.  
Tokyo office: 1-1-8 Nishi Gotanda,  
Shinagawa-ku,  
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.  
6-8 Fiveways Boulevarde Keysborough,  
Victoria 3173, Australia  
ALPINE ELECTRONICS FRANCE S.A.R.L.  
(RCS PONTOISE B 338 101 280)  
98, Rue De La Belle Etoile, Z.I. Paris Nord Il  
B.P. 50016 F-95945, Roissy, Charles De Gaulle  
Cedex, France  
Tokyo 141-8501, Japan  
Tel.: (03) 3494-1101  
Tel.: (03) 9769-0000  
ALPINE ELECTRONICS GmbH  
Kreuzerkamp 7-11 40878 Ratingen, Germany  
Tel.: 02102-45 50  
Tel.: 01-48 63 89 89  
ALPINE ELECTRONICS OF AMERICA, INC.  
19145 Gramercy Place, Torrance,  
California 90501, U.S.A.  
ALPINE ELECTRONICS OF U.K., LTD.  
13 Tanners Drive, Blakelands, Milton Keynes  
MK14 5BU, U.K.  
ALPINE ITALIA S.p.A.  
Via C. Colombo 8, 20090 Trezzano Sul Naviglio  
MI, Italy  
Tel.: 1-800-ALPINE-1 (1-800-257-4631)  
Tel.: 01908-61 15 56  
ALPINE ELECTRONICS OF CANADA, INC.  
Suite 203, 7300 Warden Ave. Markham,  
Ontario L3R 9Z6, Canada  
Tel.: 02-48 47 81  
ALPINE ELECTRONICS DE ESPAÑA, S.A.  
Portal De Gamarra 36, Pabellón 32  
01013 Vitoria (Alava)-Apdo. 133, Spain  
Tel.: 34-45-283588  
Tel.: 1-800-ALPINE-1 (1-800-257-4631)  
Yamagata Printing Co., Ltd.  
2-6-34, Takashima, Nishi-ku,  
Yokohama, Kanagawa, Japan  
Designed by ALPINE Japan  
Printed in Japan (Y)  
68P41262Y50-O  
ENGLISH  
Contents  
Operating Instructions  
MD Player Operation (Optional)  
Playing Mini-Disc (MD)................................. 18  
Music Sensor (Skip)........................................ 18  
Fast Forward and Backward ........................... 19  
Repeat Play ..................................................... 19  
M.I.X. (Random) Play .................................... 19  
Scrolling Displayed Titles............................... 19  
Displaying List for MD Titles......................... 19  
Cassette Player Operation (Optional)  
Controlling Cassette Player ............................ 20  
Fast Forward/Rewind/Reversing Tape Direction/  
Pause ............................................................ 20  
Program Sensor ............................................... 21  
Repeat Play ..................................................... 21  
Blank Skip....................................................... 21  
DVD/Video CD/CD Player/DVD  
WARNING  
WARNING..................................................3  
CAUTION ...................................................3  
PRECAUTIONS .........................................4  
Basic Operation  
Using Face Cover .............................................. 8  
Initial System Start-UP ..................................... 8  
Raising the Monitor .......................................... 8  
Lowering the Monitor ....................................... 9  
Turning Power On or Off .................................. 9  
Selecting the Monitor Opening Angle .............. 9  
Adjusting the Monitor Viewing Angle .............. 9  
Adjusting the Volume/Bass/Treble/Balance  
(Between Left and Right)/Fader (Between  
Front and Rear)............................................ 10  
Audio Mute Function ...................................... 10  
Turning Loudness On or Off ........................... 10  
Radio Operation  
changer Operation (Optional)  
Playing DVD/Video CD/CD ........................... 22  
Still/Pause ....................................................... 22  
Chapter (DVD)/Track (Video CD) Sensor ...... 23  
Fast Forward/Backward .................................. 23  
Repeat Play ..................................................... 23  
Playing tracks in random order (M.I.X.)  
Manual Tuning ................................................ 11  
Automatic Seek Tuning .................................. 11  
Manual Storing of Station Presets .................. 12  
Automatic Memory of Station Presets ............ 12  
Storing into Direct Access Preset  
(Video CD/CD)............................................ 23  
Displaying List of Disc Titles ......................... 23  
Controlling DVD Changer .............................. 24  
Navigation System Operation (Optional)  
Controlling Navigation System....................... 25  
Auxiliary Device Operation (Optional)  
Operating Auxiliary Devices........................... 26  
Audio Processor Operation (Optional)  
Selecting Factory (Maker's) Equalization Presets ... 27  
Creating Personal Equalizer Characteristic Curves .. 28  
Selecting Factory Surround Mode Presets ...... 28  
Adjusting Surround Levels and Surround  
(D.A.P.) Band .............................................. 13  
Tuning to Preset Stations ................................ 13  
Selecting Preset Stations from  
List Displayed.............................................. 13  
T.R.V.S. Search for Local Stations ................. 13  
CD player Operation (IVA-C801 only)  
(CVA-1006.....optional)  
Playback .......................................................... 14  
Fast Forward and Backward ........................... 14  
Music Sensor (Skip)........................................ 15  
Repeat Play ..................................................... 15  
M.I.X. (Random) Play .................................... 15  
Displaying and Scrolling CD Title/Text ......... 15  
Displaying List of Track Titles/CD Titles ....... 16  
Controlling CD Changer (Optional) ............... 17  
Multi-Changer Selection ................................. 17  
Delay Time .................................................. 29  
Selecting DHE (Digital Harmonic Enhancer)  
Mode............................................................ 29  
Setting DHE Power or Fine Mode .................. 30  
Selecting BBE Mode ...................................... 30  
Customizing BBE Mode ................................. 31  
Selecting Listening Position ........................... 31  
1-EN  
Adjusting Listening Position .......................... 31  
Adjustment of Time Correction Value ............ 32  
Adjusting Cross-Over (X-Over)  
Setting Automatic Background  
Texture/Color Scroll .................................... 50  
Switching Display Modes ............................... 50  
Playing 2 Sources Simultaneously.................. 51  
Remote Control Operation  
Controls on Remote Control ........................... 52  
Battery Replacement ....................................... 53  
Information  
Point of 2-Way Divider................................ 32  
Adjusting Levels ............................................. 33  
Adjusting Time-Correction for 2-Way  
Speaker System ........................................... 34  
Memorizing Divider Settings.......................... 35  
Recalling Memorized Divider Settings  
In Case of Difficulty ....................................... 54  
Using Function Buttons ............................... 35  
Recalling Divider Settings Memorized  
Specifications .................................................. 57  
Using Optional Divider ............................... 35  
Memorizing Characteristic Curves ................. 35  
Recalling Memorized Characteristic Curves  
Using Function Buttons ............................... 36  
Selecting Characteristic Curves from  
Installation and Connections  
Warning ........................................................... 58  
Caution ............................................................ 58  
Precautions ...................................................... 58  
Installation ...................................................... 59  
Connections .................................................... 62  
Displayed Audio Processor List .................. 36  
Other Useful Features  
Displaying Spectrum Analyzer .............................. 37  
Turning Defeat Mode On and Off................... 38  
Titling Radio stations/CDs.............................. 38  
Adjusting Subwoofer Level (when  
LIMITED WARRANTY  
subwoofer is used with other speakers) ....... 40  
Switching Phase .............................................. 41  
Setting the External Device Interrupt Mode ... 41  
Setting Interrupt Icon Display (IN-INT)......... 42  
Interrupt Feature (MIX LEVEL) .................... 42  
Setting Bass Frequency ................................... 43  
Setting Visual Mode ........................................ 43  
Selecting Rear Monitor ................................... 44  
Displaying Time.............................................. 45  
Resetting Clock ............................................... 45  
Setting Daylight Saving Time ......................... 45  
Sound (Beep) Guide Function ........................ 46  
Demonstration................................................. 46  
Setting Automatic Opening/Closing of Monitor .... 47  
Adjusting Brightness of Picture ...................... 47  
Adjusting Tint of Picture................................. 48  
Adjusting Color of Picture .............................. 48  
Illumination Control ....................................... 49  
Switching Background Textures/Colors ......... 49  
2-EN  
WARNING  
USE THE CORRECT AMPERE RATING WHEN  
REPLACING FUSES.  
WARNING  
Failure to do so may result in fire or electric shock.  
This symbol means important instructions.  
Failure to heed them can result in serious  
injury or death.  
DO NOT BLOCK VENTS OR RADIATOR PANELS.  
Doing so may cause heat to build up inside and may result  
in fire.  
INSTALL THE PRODUCT CORRECTLY SO THAT THE  
DRIVER CANNOT WATCH TV/VIDEO UNLESS THE  
VEHICLE IS STOPPED AND THE EMERGENCY BRAKE  
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.  
Use for other than its designed application may result in  
fire, electric shock or other injury.  
IS APPLIED.  
It is dangerous (and illegal in many states) for the driver to  
watch TV/Video while driving a vehicle. Installing this  
product incorrectly enables the driver to watch TV/Video  
while driving. This may cause a distraction, preventing the  
driver from looking ahead, thus causing an accident. The  
driver or other people could be severely injured.  
DO NOT PLACE HANDS, FINGERS OR FOREIGN  
OBJECTS IN INSERTION SLOTS OR GAPS.  
Doing so may result in personal injury or damage to the  
product.  
DO NOT WATCH VIDEO WHILE DRIVING.  
Watching the video may distract the driver from looking  
ahead of the vehicle and cause an accident.  
CAUTION  
This symbol means important instructions.  
Failure to heed them can result in injury or  
material property damage.  
DO NOT OPERATE ANY FUNCTION THAT TAKES  
YOUR ATTENTION AWAY FROM SAFELY DRIVING  
YOUR VEHICLE.  
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.  
Failure to do so may cause personal injury or damage to  
the product. Return it to your authorized Alpine dealer or  
the nearest Alpine Service Center for repairing.  
Any function that requires your prolonged attention  
should only be performed after coming to a complete stop.  
Always stop the vehicle in a safe location before  
performing these functions. Failure to do so may result in  
an accident.  
DO NOT MIX NEW BATTERIES WITH OLD BATTERIES.  
INSERT WITH THE CORRECT BATTERY POLARITY.  
When inserting the batteries, be sure to observe proper  
polarity (+ and ) as instructed. Rupture or chemical  
leakage from the battery may cause fire or personal injury.  
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN  
STILL HEAR OUTSIDE NOISE WHILE DRIVING.  
Failure to do so may result in an accident.  
MINIMIZE DISPLAY VIEWING WHILE DRIVING.  
Viewing the display may distract the driver from looking  
ahead of the vehicle and cause an accident.  
KEEP FINGERS AWAY WHILE THE MOTORIZED  
FRONT PANEL OR MOVING MONITOR IS IN MOTION.  
Failure to do so may result in personal injury or damage to  
the product.  
DO NOT DISASSEMBLE OR ALTER.  
Doing so may result in an accident, fire or electric shock.  
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE  
GROUND.  
(Check with your dealer if you are not sure.) Failure to do  
so may result in fire, etc.  
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT  
OF THE REACH OF CHILDREN.  
Swallowing them may result in serious injury. If  
swallowed, consult a physician immediately.  
3-EN  
WARNING  
PRECAUTIONS  
Temperature  
Inserting Discs  
Your player accepts only one disc at a time for playback.  
Do not attempt to load more than one disc.  
Make sure the label side is facing up when you insert the  
disc. Your player will automatically eject any disc that is  
inserted incorrectly. If the player continues to eject a  
correctly inserted disc, push the RESET switch with a  
pointed object such as a ball-point pen.  
Playing a disc while driving on a very bumpy road may  
result in skips, but this will not scratch the disc or damage  
the player.  
Be sure the temperature inside the vehicle is between  
+45°C (+113°F) and 0°C (+32°F) before turning your unit  
on.  
Moisture Condensation  
You may notice the CD playback sound wavering due to  
condensation. If this happens, remove the disc from the  
player and wait about an hour for the moisture to  
evaporate.  
New Discs  
As a protective measure to prevent the CD from jamming,  
the CD player will automatically eject discs with irregular  
surfaces or inserted incorrectly. When a new disc is  
inserted into the player and ejected after initial loading,  
using your finger, feel around the inside of the center hole  
and outside edge of the disc. If you feel any small bumps  
or irregularities, this could inhibit proper loading of the  
disc. To remove the bumps, rub the inside edge of the hole  
and outside edge of the disc with a ball-point pen or other  
such instrument, then insert the disc again.  
Damaged Disc  
Do not attempt to play cracked, warped, or damaged  
discs. Playing a bad disc could severely damage the  
playback mechanism.  
Maintenance  
If you have problems, do not attempt to repair the unit  
yourself. Return it to your Alpine dealer or the nearest  
Alpine Service Station for servicing.  
Never Attempt the Following  
Center  
Hole  
Center  
Hole  
New  
Disc  
Do not grip or pull out the disc while it is being pulled  
back into the player by the automatic reloading  
mechanism.  
Bumps  
Outside  
(Bumps)  
Do not attempt to insert a disc into the unit when the unit  
power is off.  
Irregular Shaped Discs  
Be sure to use round shape discs only for this unit and  
never use any special shape discs.  
Use of special shape discs may cause damage to the  
mechanism.  
4-EN  
Installation Location  
Disc Accessories  
Make sure the IVA-C801/CVA-1006 will not be installed  
in a location subjected to:  
There are various accessories available on the market for  
protecting the disc surface and improving sound quality.  
However, most of them will influence the thickness and/or  
diameter of the disc. Using such accessories can cause the  
disc to be out of standard specifications and may create  
operational problems. We recommend not using these  
accessories on discs played in Alpine CD players.  
Direct sun and heat  
High humidity and water  
Excessive dust  
Excessive vibrations  
Correct Handling  
Do not drop the disc while handling. Hold the disc so you  
will not leave fingerprints on the surface. Do not affix  
tape, paper, or gummed labels to the disc. Do not write on  
the disc.  
Transparent Sheet  
Disc Stabilizer  
Handling the Detachable Front Panel  
CORRECT  
Do not expose to rain or water.  
Do not drop or apply shock.  
After turning the system off, a slight ghost of the  
image will remain temporarily. This is an effect  
peculiar to LCD technology and is normal.  
Under cold temperature conditions, the screen may  
lose contrast temporarily. After a short warm-up  
period, it will return to normal.  
INCORRECT  
CORRECT  
Disc Cleaning  
Alpine products equipped with the Ai-NET bus,  
connected to the IVA-C801/CVA-1006, can be operated  
from the IVA-C801/CVA-1006. Depending on the  
products connected, the functions and displays will vary.  
For details, consult your Alpine dealer.  
Fingerprints, dust, or soil on the surface of the disc could  
cause the CD player to skip. For routine cleaning, wipe  
the playing surface with a clean, soft cloth from the center  
of the disc to the outer edge. If the surface is heavily  
soiled, dampen a clean, soft cloth in a solution of mild  
neutral detergent before cleaning the disc.  
5-EN  
WARNING  
Remove the anti-theft cover when you drive. This prevents  
the cover from falling off the unit and interfering with the  
safe operation of the vehicle.  
Operation of some of the functions of this unit is very  
complex. Because of this, it was deemed necessary to  
place these functions into a special screen. This will  
restrict operation of these functions to times when the  
vehicle is parked. This ensures the focus of the driver's  
attention will be on the road and not on the IVA-C801/  
CVA-1006. This has been done for the safety of the driver  
and passengers.  
Title Input and Audio Processor Adjustments cannot be  
made if the car is moving. The car must be parked and the  
parking brake must be engaged for the procedure  
described in the Owner's Manual to be valid. The warning  
"CAN'T OPERATE WHILE DRIVING," will be  
displayed if any attempts are made to perform these  
operations while driving.  
This operation is the same as when selecting sources using  
the remote control. When the car is parked, the selection is  
made as described in the Owner's Manual.  
6-EN  
Basic Operation  
PWR  
OPEN/CLOSE  
PWR  
OPEN/CLOSE  
SOURCE  
(IVA-C801)  
(CVA-1006)  
SOURCE Rotary encoder  
Rotary encoder  
This section describes the basic operation of the radio.These operations also apply to the other  
sources.  
5
Press the rotary encoder to execute the  
selection. The Radio mode screen is displayed.  
1
2
Press the PWR (Power) button on the unit to turn  
the power on to the unit.  
NOTE  
Press the OPEN/CLOSE button to open the  
monitor. The unit beeps 3 times and raises the  
monitor. The opening screen appears on the  
monitor.  
If PAGE 1/2 or PAGE 1/3 appears in the Function Guide  
menu, there are additional functions available for the  
selected source. Access these functions by pressing the  
FUNC button.  
3
4
Press the SOURCE button. The display shows  
the main menu screen.  
6
Press the SOURCE button again to select  
another source.  
Rotate the rotary encoder and select "RADIO"  
from the main menu.  
NOTE  
• If a DVD player or DVD Changer is connected and its  
power is on, the display shows " DVD or DVD-CHG ,  
AUX2 " instead of " AUX1 AUX2 ."  
• If both the DVD player and DVD Changer are  
connected, the display shows " DVD " instead of  
" AUX1 ", and " DVD-CHG " instead of " AUX2 ".  
Radio Mode Screen  
(IVA-C801 screen)  
Selected Source  
Volume Level  
Current Time  
The Function Guide displays the labels for each of the Function buttons. These labels will  
change depending upon the functions for the selected source.  
7-EN  
Basic Operation  
and  
and  
PWR  
OPEN/CLOSE  
PWR  
OPEN/CLOSE  
(IVA-C801)  
(CVA-1006)  
Using Face Cover  
Compatibility with Factory Steering Wheel  
Radio Controls  
An anti-theft face cover is provided with the  
IVA-C801/CVA-1006.  
Put the face cover onto the IVA-C801/CVA-1006  
when you leave the vehicle.  
Be sure to remove the anti-theft face cover when you  
drive.  
If your vehicle has steering wheel controls for  
the radio, an optional steering wheel control  
interface may be available to connect to your  
Alpine radio. For details, contact your Alpine  
dealer.  
Raising the Monitor  
1
Press the OPEN/CLOSE button.  
The unit beeps 3 times and raises the monitor  
automatically.  
NOTES  
The IVA-C801/CVA-1006 is a precision device. With  
gentle handling, its unique capabilities can be enjoyed  
for a long time.  
If the monitor touches an obstacle while it is being  
raised, the unit will stop raising the monitor  
immediately. Should this occur, remove the obstacle  
and press the OPEN/CLOSE button again to lower the  
monitor.  
When the movable monitor is opened, do not place any  
object on the monitor and be careful not to bump or  
apply any pressure to the monitor while it is open. This  
can cause damage to the mechanism.  
Initial System Start-UP  
(IVA-C801)  
RESET  
switch  
(CVA-1006)  
Under low ambient temperature conditions, the  
display may be dark for a short period of time  
immediately after the power is turned on. Once the  
LCD has warmed up, the display will return to  
normal.  
For your safety, some operation of the unit cannot be  
performed while the vehicle is in motion. In this case,  
first stop the vehicle and engage the parking brake,  
then perform the operation.  
RESET  
switch  
1
Immediately after installing or applying power to  
the unit, it should be initialized. Press the RESET  
switch with a ball-point pen or any other pointed  
object.  
Operation of the remote control (described on pages  
52-53) can be carried out even while the monitor  
screen is closed.  
8-EN  
Lowering the Monitor  
Selecting the Monitor Opening  
Angle  
1
Press the OPEN/CLOSE button.  
The unit will beep 3 times and lower the monitor  
automatically.  
The monitor opening angle can be set in 2  
positions.  
NOTES  
The IVA-C801/CVA-1006 is a precision device. With  
gentle handling, its unique capabilities can be enjoyed  
for a long time.  
If the monitor touches an obstacle while it is being  
lowered, the unit will stop lowering the monitor  
immediately.  
1
Press and hold the OPEN/CLOSE button for at  
least 2 seconds while the monitor is being raised.  
Each press changes the monitor angle back or  
forth.  
Adjusting the Monitor Viewing  
Angle  
Should this occur, remove the obstacle and press the  
OPEN/CLOSE button again to lower the monitor.  
Turning Power On or Off  
Adjust the monitor's angle for better visibility.  
Some of this unit's functions, cannot be performed  
while the vehicle is in motion. Be sure to stop your  
vehicle in a safe location and apply the parking  
brake, before attempting these operations.  
1
Press the  
and  
buttons to adjust the  
monitor's angle so the screen will be in the best  
viewing position. Each press of the buttons  
produces a beep and changes the screen angle  
between 80 and 104 degrees.  
1
Press the PWR (Power) button to turn on the unit.  
NOTES  
The opening screen appears automatically.  
If the monitor touches an obstacle while the angle is  
being adjusted the unit will stop the screen immediately.  
Should this happen, remove the obstacle and press the  
NOTE  
The unit can be turned on by pressing any button on the  
unit except the MUTE, OPEN/CLOSE and  
(ANGLE) buttons.  
or  
button again.  
The screen color will vary when viewed at certain  
angles. Adjust the screen angle for the best viewing  
position.  
If the voltage of the vehicle's battery power is low, the  
screen may blink when the screen angle is changed.  
This is normal and not a malfunction.  
2
Press the PWR (Power) button again to turn off  
the unit.  
NOTES  
The IVA-C801/CVA-1006 draws minimal current even  
when its power switch is turned off. If the switched  
power (ignition) lead of the IVA-C801/CVA-1006 is  
connected directly to the positive (+) post of the  
vehicle's battery, the battery may be discharged. If this  
lead is unswitched, it must be disconnected from the  
battery post should the vehicle be left unused for an  
extended period of time.  
An SPST (Single-Pole, Single-Throw) switch (sold  
separately) can be added to simplify this procedure.  
Then, you can simply place it in the OFF position when  
you leave the vehicle. Turn the SPST switch back ON  
before using the IVA-C801/CVA-1006. For connecting  
the SPST switch, refer to the "Connection Diagram of  
SPST switch" on page 61.  
Some operation of the unit cannot be performed while  
the vehicle is in motion. In this case, be sure to first  
stop your vehicle and apply the parking brake, then  
perform the operation.  
9-EN  
Basic Operation  
MUTE  
MUTE  
(IVA-C801)  
(CVA-1006)  
Rotary encoder  
Rotary encoder  
Adjusting the Volume/Bass/Treble/  
Balance (Between Left and Right)/  
Fader (Between Front and Rear)  
Audio Mute Function  
Activating this function will instantly lower the  
volume level by 20 dB.  
1
Press the rotary encoder repeatedly until the  
mode you wish to adjust is obtained. Each press  
changes the modes as follows:  
1
Press the MUTE button to activate the MUTE  
mode. The audio level will decrease by about  
20 dB.  
BAS. TRE. BAL. FAD. VOL.  
Pressing the MUTE button again will bring the  
audio back to its previous level  
The volume level can be adjusted at any time by  
just rotating the rotary encoder.  
Turning Loudness On or Off  
NOTE  
When the subwoofer mode is ON, its level may also be  
adjusted.  
Loudness introduces a special low- and high-  
frequency emphasis at low listening levels. This  
compensates for the ear's decreased sensitivity to  
bass and treble sound.  
2
Rotate the rotary encoder to set to the desired  
sound within 5 seconds after selecting the mode.  
NOTE  
NOTE  
If the rotary encoder is not turned or pressed within 5  
seconds after selecting the BAS. (Bass), TRE. (Treble),  
BAL. (Balance), or FAD. (Fader), the unit automatically  
defaults back to the VOL. (Volume) mode.  
When an equalizer or digital sound processor is  
connected, this function is inoperative.  
1
Press and hold the rotary encoder for at least 2  
seconds to switch between the Loudness On  
and Off modes.  
10-EN  
Radio Operation  
(IVA-C801)  
(CVA-1006)  
1 2 3  
1 2 3  
SOURCE  
BAND SOURCE Rotary encoder  
Rotary encoder  
BAND  
Manual Tuning  
Automatic Seek Tuning  
1
2
Press the SOURCE button after turning on the  
power.  
The main menu screen appears.  
1
2
Press the BAND button repeatedly to select the  
desired radio band, FM or AM.  
Press the 2 (TUNE) button to select the desired  
mode, DX or Local. Each press changes as  
follows:  
Rotate the rotary encoder to scroll the bottom  
menu and select "RADIO," then press the rotary  
encoder.  
Distance  
Local  
Manual  
The radio mode is activated and the display  
changes to the Radio Mode screen.  
There are two modes you can select for auto  
tuning, DX and Local:  
3
4
Press the BAND button to select the desired  
radio band. Each press changes the bands as  
follows:  
DX (Distance) mode (with DX SEEK indicator  
ON); Both strong and weak stations will be  
tuned in.  
Local mode (with SEEK indicator ON);  
Only strong stations will be tuned in.  
The initial setting is DX.  
FM1 FM2 AM  
Press the 2 (TUNE) button to choose the  
manual tuning mode. Each press changes the  
function modes for the buttons 1 and 3 as  
follows:  
3
Press the 1 (g) or 3 (f) button to  
automatically seek a radio station downward or  
upward respectively.  
When the unit finds a station, it stops. To  
automatically seek next station, press the same  
button again.  
Distance  
Local  
Manual  
g
f
g
f
(
)
5
Press the 1 (() or 3 ()) button to change  
the radio frequency downward or upward  
respectively. Each press changes the frequency  
by one step. When the button is pressed and  
held, the frequency changes continuously until  
the button is released.  
NOTE  
When a stereo FM station is tuned in, the STEREO  
indicator appears in the display.  
NOTE  
When a stereo FM station is tuned in, the STEREO  
indicator appears in the display.  
11-EN  
Radio Operation  
(IVA-C801)  
(CVA-1006)  
Function buttons  
(1 through 6)  
Function buttons  
(1 through 6)  
1
3 4 5 6  
1
3 4 5 6  
FUNC  
FUNC  
Rotary encoder  
Rotary encoder  
BAND  
LIST  
BAND  
LIST  
Manual Storing of Station Presets  
Automatic Memory of Station  
Presets  
1
Tune in a desired radio station you wish to store  
in the preset memory by manual or automatic  
seek tuning.  
The tuner can automatically seek and store 6  
strong stations in the selected band in order of  
signal strength.  
Press the FUNC (PAGE 1/2) button.  
2
Press and hold any one of the Function buttons  
1 (P.SET1) through 6 (P.SET6) for at least 2  
seconds. The Function Guide indicators in the  
display, P.SET1 through P.SET6, will blink for 5  
seconds.  
1
2
Press the BAND button in the radio mode to  
select the desired radio band.  
Press the 6 (A.MEMO) button.  
The tuner automatically seeks and stores 6  
strong stations into the 1 (P.SET1) to 6  
(P.SET6) buttons in order of signal strength.  
When the automatic storing has been  
completed, the tuner goes to the station stored in  
the 1 (P.SET1) button.  
3
4
While the P.SET1 through P.SET6 indicators in  
the display are blinking, press the Function  
button into which you wish to store the station  
(within 5 seconds). The indicators in the display  
stop blinking, showing that the station has been  
memorized at the Preset button pressed.  
NOTES  
Repeat the above procedure (1 to 3) to store up  
to 5 other stations onto the same band.  
To use this procedure for other bands, simply  
select the band desired and repeat the  
procedure.  
If no stations are stored, the tuner will return to the  
original station you were listening to before the  
automatic storing procedure began.  
The radio station names (titles) may be erased when  
Automatic Memory of Station Presets function is  
performed.  
A total of 24 stations can be stored in the preset  
memory (6 stations for each band; FM1, FM2,  
AM or D.A.P.).  
NOTE  
If a preset memory has already been set in the same  
Function button, it will be cleared and the new station  
will be memorized.  
12-EN  
Storing into Direct Access Preset  
(D.A.P.) Band  
Selecting Preset Stations from List  
Displayed  
Any combination of AM and FM radio stations (up  
to 6 stations) can be manually preset onto the  
D.A.P. band.  
The desired preset station can be selected from  
the preset station list displayed. If stations have  
been titled (named), their titles will also be  
displayed. (For Titling Radio stations/CDs, see  
page 38).  
1
2
Press the 4 (D.A.P.) button in the radio mode to  
activate the D.A.P. mode.  
1
Press the LIST button. The list showing the  
preset stations (with the station titles if they have  
been titled).  
To memorize stations onto the D.A.P. band,  
follow the steps for the Manual Storing of Station  
Presets procedure on this page.  
2
3
Rotate the rotary encoder to select a desired  
preset station from the list.  
NOTE  
This function can be used together with the Automatic  
Memory Preset if you want to have all AM or all FM  
stations stored into D.A.P.  
When a desired station is selected, press the  
rotary encoder. The unit receives the selected  
preset station.  
3
Press the 4 (D.A.P.) button for a second time to  
deactivate the D.A.P. mode.  
NOTES  
Press the LIST or FUNC (RETURN) button while in  
the preset list menu (station title list) to return to the  
radio mode display.  
Tuning to Preset Stations  
With the preset list menu displayed, press the 1  
(RADIO) button to switch to the preset station list  
menu. Press the BAND button to change the radio  
bands.  
You can tune in the preset stations in memory on  
each band using the Function buttons.  
1
Press the BAND button in the radio mode to  
choose the desired radio band.  
Each press changes the radio bands.  
T.R.V.S. Search for Local Stations  
NOTE  
Using the T.R.V.S. feature of this unit, you can  
automatically seek and memorize up to 12 local  
stations (max.) in a memory separate from your  
regular preset memory. This keeps the currently  
preset stations you normally listen to, intact.  
To select the D.A.P. band, press the 4 (D.A.P.) button.  
2
Press the Function button 1 (P.SET1) through  
6 (P.SET6) that has your desired preset station  
in memory. The preset station is received.  
1
2
Press the BAND button in the radio mode and  
select the desired radio band.  
Press the 5 (T.R.V.S.) button to activate the  
T.R.V.S. mode. The unit will automatically search  
and store up to 12 receivable, local stations.  
NOTE  
If no stations are memorized, the display shows "NO  
MEMORY."  
3
4
Press the 1 (; P.DN) or 3 (P.UP :) button and  
select your desired station.  
To deactivate the T.R.V.S. mode, press the 5  
(T.R.V.S.) button.  
13-EN  
CD player Operation (IVA-C801 only)  
(CVA-1006.....optional)  
(IVA-C801)  
(CVA-1006)  
1 2 3 4 5 6  
1 2 3 4 5 6  
SOURCE  
SOURCE  
Rotary encoder  
Rotary encoder  
c
NOTES (IVA-C801 only)  
Playback  
Three-inch (8 cm) CD's can be used.  
Only compact discs containing the mark shown can be  
Only IVA-C801 has a built-in CD player.  
used.  
When an optional Alpine CD player or CD changer is  
connected, you can control it from the head unit. This  
section describes operation assuming that an Alpine  
CD player/Changer is connected to the IVA-C801/  
CVA-1006.  
We cannot fully guarantee the playback of CD-R (CD-  
Recordable). You cannot playback CD-RW (CD-  
ReWritable) on this unit.  
Be sure to turn the ignition key to the ACC or ON  
position before inserting an CD. Otherwise it may  
cause damage to the player.  
(When a CD changer is connected, see page 17 to  
select your desired disc.)  
IVA-C801  
\
CVA-1006  
×
built-in CD  
Slave CD player  
CD Changer  
Option  
Option  
Option  
Option  
Fast Forward and Backward  
1
2
Press the SOURCE button to display the main  
menu screen.  
1
Press and hold the 3 (f) or 1 (g) button  
to quickly move forward or backward respectively  
to reach the desired music section on the disc.  
Release the button when the desired section is  
reached.  
Rotate the rotary encoder and select the CD  
player mode. Then, press the rotary encoder to  
execute the selection.  
The display shows the CD player mode screen.  
When a CD is inserted into the CD SLOT of the  
IVA-C801, with the label side facing up, the unit  
starts to play the CD.  
CVA-1006:  
When an optional Alpine CD player is connected,  
inserting an CD into the optional CD player starts  
playback automatically.  
3
4
To temporarily pause playing, press the 2 (:/J)  
button.  
To resume play, press the 2 (:/J) button for a  
second time.  
Press the eject (c) button when you want to  
eject the CD. (If you use an optional CD player,  
press the eject button on the optional CD player.)  
14-EN  
Music Sensor (Skip)  
Displaying and Scrolling CD Title/  
Text  
This feature allows you to go to the beginning of a  
track.  
If titles have been memorized for CDs, the CD  
titles can be shown on the display (for titling CDs,  
see "Titling Radio stations/CDs" on page 38). The  
text for the CD titles/tracks can be displayed and  
scrolled while you are playing a music CD with  
title/text.  
1
Lightly press the 1 (g) button during the CD  
play to return to the beginning of the current track.  
If you wish to return to the beginning of a track  
further back, repeatedly press the 1 (g)  
button until the desired track is reached.  
Lightly press the 3 (f) button during the CD  
play to advance to the beginning of the next  
track. If you wish to advance to the beginning of  
a track further ahead, repeatedly press until the  
desired track is reached.  
1
Press the 6 (SCROLL) button during CD play.  
Each press changes between the CD title  
scrolling mode and track title scrolling mode.  
Description of "Title" and "Text":  
Title: this unit allows you to title (name) CDs  
(see page 39).  
Text:s  
Some CDs have pre-recorded text  
Repeat Play  
information for the CD/track names etc.  
1
Press the 4 (REPEAT) button while the track  
that you want to play repeatedly is playing.  
The track will be repeatedly played until the  
repeat mode is canceled.  
NOTES  
If either of the disc and track titles is unavailable, the  
space for that title in the display will be left blank.  
If both of the disc and track titles are unavailable, the  
display will show "NO TITLE."  
To cancel the repeat play, press the 4 (REPEAT)  
button until the REPEAT indicator disappears.  
For the MD player, the same display as above will be  
shown.  
2
If the text/title is longer than 12 characters, press  
and hold the 6 (SCROLL) button for at least 2  
seconds to scroll the text/title.  
To stop the scrolling, press and hold the 6  
(SCROLL) button for at least 2 seconds.  
NOTE  
If a CD Changer is connected and the REPEAT ALL  
mode is selected, the unit repeatedly plays back all tracks  
on the disc selected.  
NOTES  
M.I.X. (Random) Play  
Depending on the character styles, characters may not  
be displayed correctly.  
In the M.I.X. mode, the tracks on the disc will be  
played back in a random sequence.  
The unit might automatically scroll the text.  
Text can only be displayed on CD changers that are  
enabled with CD TEXT.  
1
Press the 5 (M.I.X.) button in the CD mode.  
All the tracks on the disc will be played back in a  
random sequence.  
The M.I.X. play continues until the M.I.X. mode is  
canceled. To cancel the M.I.X. play, press the 5  
(M.I.X.) button repeatedly until the M.I.X.  
indicator disappears.  
NOTES  
If a CD Changer equipped with the M.I.X. ALL function  
is connected, M.I.X. ALL will also be selectable.  
In this mode, the tracks on all the CDs in the current  
magazine will be included in the random playback  
sequence.  
During M.I.X. play, Repeat Play for a single track will  
be disabled.  
15-EN  
CD player Operation (IVA-C801 only)  
(CVA-1006.....optional)  
(IVA-C801)  
(CVA-1006)  
Function buttons  
(1 through 6)  
Function buttons  
(1 through 6)  
FUNC  
FUNC  
SOURCE  
CHG BAND  
LIST Rotary encoder CHANGER BAND  
NOTES  
LIST Rotary encoder  
SOURCE  
Displaying List of Track Titles/CD  
Titles  
If the disc is not titled, the display shows "NO TITLE  
CD." If no disc is loaded, the display shows "NO  
DISC."  
Pressing the LIST or FUNC (RETURN) button while  
the list of the disc titles is being displayed, changes the  
display back to the CD/CD Changer mode screen.  
To directly go to the preset radio station list screen,  
press the 1 (RADIO) button. Then, press the BAND  
button to change the radio band.  
If CD titles have been memorized, you can select  
a CD from the CD title list.  
When CD text discs are inserted into the CD  
player (for IVA-C801 only), you can select a track  
from the displayed list of track titles. (For Titling  
Radio Stations/CDs, see page 38.)  
IVA-C801:  
Pressing the 2 button displays the title list or the  
track title list only when a CD with text is loaded in  
the built-in CD player.  
1
Press the LIST button in the CD/CD changer  
mode.  
CVA-1006:  
When a CD player or CD changer is connected,  
pressing the 2 button displays the CD title list.  
CD (built-in player) mode:  
If the titles have been memorized for CDs, the  
list of CD titles can be displayed.  
When CD text discs are inserted. The list of Track  
titles will be displayed.  
CD changer/CD (when connected to the CD  
player) mode:  
If the titles have been memorized for CDs, the  
list of CD titles can be displayed.  
2
3
Rotate the rotary encoder and select (highlight)  
your desired track title or CD title to play.  
Press the rotary encoder to execute the  
selection.  
The selected title plays, the title list screen  
closes, and the CD mode main screen or CD  
changer mode main screen appears.  
16-EN  
Controlling CD Changer (Optional)  
Multi-Changer Selection  
An optional 6-disc or 12-disc CD Changer may be  
connected to the IVA-C801/CVA-1006 if it is Ai-  
NET compatible. With a CD Changer connected to  
the Ai-NET input of the IVA-C801/CVA-1006, the  
CD Changer will be controllable from the IVA-  
C801/CVA-1006.  
Using the KCA-400C (the Multi-Changer  
Switching device) multiple changers can be  
controlled by the IVA-C801/CVA-1006.  
Alpine's Ai-NET system will support up to 6 CD  
Changers. When operating two or more changers,  
the KCA-400C (Multi-Changer Switching device)  
must be used. If you use 1 Switching device, you  
can connect up to 4 CD Changers. If you use 2  
Switching devices, you can connect up to 6 CD  
Changers.  
1
2
Press the SOURCE button to display the main  
menu.  
See the Multi-Changer Selection section on this  
page for selecting the CD Changers.  
Rotate the rotary encoder to select changer 1-4  
(when one KCA-400C is connected) or changer  
1-6 (when two KCA-400Cs are connected). Then  
press the rotary encoder.  
You can directly select the CD changer mode by  
pressing the CHG (IVA-C801) or CHANGER (CVA-  
1006) button.  
The display shows the selected CD changer  
mode screen.  
1
2
Press the SOURCE button to display the main  
NOTE  
menu.  
When one KCA-400C is connected to the changer,  
"Changer 1-4" is displayed in the main menu. When two  
KCA-400Cs are connected to the changer, "Changer 1-6"  
is displayed in the main menu.  
Rotate the rotary encoder to select "CD CHG,"  
then press the rotary encoder.  
The display changes to the CD changer mode  
screen.  
3
4
In Changer mode, you can select the next  
changer (connected changers only) by pressing  
the BAND button on the unit or on the remote.  
3
When a 6-Disc CD Changer is connected.  
Press the FUNC (PAGE 1/2) button. The  
Function Guide display changes.  
NOTE  
You cannot operate this function in the title display or  
Title inputting display.  
Press the Function buttons to select your desired  
disc loaded. The Function buttons 1 (DISC1)  
through 6 (DISC6) select the discs from the first  
disc to 6th disc. For example, press the 3 (DISC  
3) button to select the third disc.  
To operate the selected changer, see "CD Player  
Operation" section.  
NOTE  
To select your desired track number on the selected disc,  
lightly press the 1 (g) or 3 (f) repeatedly until  
your desired track number is displayed.  
When a 12-Disc CD Changer is connected.  
You can select the disc numbers 1 to 6 in the  
same manner as for 6-disc Changer.  
Press the FUNC (PAGE 1/3) button twice to  
select the disc numbers 7 to 12. The Function  
Guide display changes and now the Function  
buttons 1-6 represent disc numbers 7-12.  
Press the Function buttons (1 through 6) to  
select your desired disc. For example, to select  
9th disc, press 3 (DISC 9) button.  
NOTES  
To select your desired track number on the selected  
disc, lightly press the 1 (g) or 3 (f)  
repeatedly until your desired track number is  
displayed.  
After selecting the desired, you can operate in the  
same way as for the CD player. For details please see  
the CD player operation section  
* If both the CD Changer and DVD Changer are  
connected, each pressing of the CHG (CHANGER)  
button changes between the CD Changer mode and  
the DVD Changer mode.  
17-EN  
MD player Operation (Optional)  
(IVA-C801)  
(CVA-1006)  
1 2 3 4 5 6  
1 2 3 4 5 6  
SOURCE  
SOURCE LIST  
Rotary encoder  
LIST Rotary encoder  
Playing Mini-Disc (MD)  
Music Sensor (Skip)  
When an optional Alpine MD player is connected to  
the IVA-C801/CVA-1006, you can control the player  
from the IVA-C801/CVA-1006.  
(When the MDA-5051 is connected, MDs can be  
played back only.)  
1
Momentarily press the 1 (g) button once to  
return to the beginning of the current track. If you  
wish to access the beginning of a track further  
back, repeatedly press until you reach the  
desired track.  
1
2
Press the SOURCE button.  
The main menu appears on the display.  
2
Press the 3 (f) button once to advance to  
the beginning of the next track. If you wish to  
access the beginning of a track further ahead,  
press repeatedly until the desired track is  
reached.  
Rotate the rotary encoder and select "MD" from  
the main menu, then press the rotary encoder to  
execute the selection.  
The MD player mode screen appears on the  
display.  
When an optional Alpine MD player is  
connected, inserting an MD into the optional MD  
player starts playback automatically.  
NOTE  
Before inserting an MD, use your finger to feel around  
the MD cartridge. If you feel any small bumps or  
irregularities, remove them because these may cause a  
malfunction or damage to the player.  
3
4
Press the 2 (:/J) button to temporarily pause  
play. To resume play, press the 2 (:/J) button  
for a second time.  
Press the eject (c) button on the MD player  
when you want to eject the MD.  
18-EN  
Fast Forward and Backward  
Displaying List for MD Titles  
1
Press and hold the 1 (g) or 3 (f) button  
to quickly move backward or forward until you  
reach the desired section of the track.  
When you reach the desired section, release the  
button. The player starts playing from that  
section.  
1
2
3
Press the LIST button in the MD player mode.  
The list of the MD titles appears in the display.  
Rotate the rotary encoder to select the desired  
title by moving the cursor to that title.  
Press the rotary encoder to execute the  
selection.  
The selected MD title will be played back and the  
MD player mode screen will appear.  
Repeat Play  
1
Press the 4 (REPEAT) button to play back  
repeatedly the track being played. The REPEAT  
indicator appears and the track plays repeatedly.  
Press the 4 (REPEAT) button repeatedly until  
the REPEAT indicator disappears to deactivate  
the repeat play.  
NOTES  
If the MD is not titled, the display shows "NO TITLE  
MD." If no MD is loaded, the display shows "NO  
DISC."  
Pressing the LIST or FUNC (RETURN) button while  
the list of the titles is being displayed changes the  
display back to the MD player mode screen.  
To directly return to the preset radio station list screen  
while the list of the titles is being displayed, press the  
1 (RADIO) button. Then, press the BAND button to  
change the radio band.  
M.I.X. (Random) Play  
1
Press the 5 (M.I.X.) button in the play or pause  
mode. The M.I.X. indicator will illuminate and the  
tracks on the disc will be played back in a  
random sequence. After all the tracks on the disc  
have been played back once, the player will  
begin a new random sequence play until the  
M.I.X. mode is deactivated.  
IVA-C801:  
Pressing the 2 button displays the CD title list or the  
track title list only when a CD with text is loaded in  
the built-in CD player.  
CVA-1006:  
When a CD/MD player or CD changer is connected,  
pressing the 2 button displays the title list.  
To stop the M.I.X. play, press the 5 (M.I.X.)  
button repeatedly until the M.I.X. indicator  
disappears.  
Scrolling Displayed Titles  
The MD player can scroll titles (disc or track  
names) having up to a maximum of 32 characters  
when it is connected.  
1
Press the 6 (SCROLL) button repeatedly while  
an MD is being played.  
Each press toggles between the MD title  
scrolling and track title scrolling.  
2
Press and hold the 6 (SCROLL) button for at  
least 2 seconds to start the auto scrolling.  
The title will be scrolled repeatedly.  
To deactivate the auto scrolling, press and hold  
the 6 (SCROLL) button for at least 2 seconds.  
NOTES  
Depending on the MD deck used for recordings/  
inputting titles, the characters may not be displayed  
correctly.  
If the MD title or track titles are not memorized, the  
unit displays "NO TITLE."  
19-EN  
Cassette Player Operation (Optional)  
(IVA-C801)  
(CVA-1006)  
1 2 3 4 5 6  
1 2 3 4 5 6  
FUNC  
FUNC  
SOURCE  
SOURCE  
Rotary encoder  
Rotary encoder  
Controlling Cassette Player  
Fast Forward/Rewind/Reversing  
Tape Direction/Pause  
If an optional Alpine cassette player is connected  
to the IVA-C801/CVA-1006 it can be controlled  
from the IVA-C801/CVA-1006.  
1
Press and hold the 3 (f) or 1 (g) button  
for at least 2 seconds to fast forward or fast  
rewind the tape respectively. When the tape  
reaches the desired portion, press and hold the  
3 (f) or 1 (g) button again for at least 2  
seconds, or press the 2 (:/J) button to resume  
tape play.  
1
2
Press the SOURCE button to display the main  
menu screen.  
Rotate the rotary encoder and select "TAPE"  
from the menu. Then, press the rotary encoder to  
execute the selection.  
2
3
Press the FUNC (PROG) button to change the  
tape direction to play the other side of the tape.  
The display shows the cassette player mode  
screen.  
Press the 2 (:/J) button to temporarily pause  
the tape play. Press again to resume tape play.  
3
4
When you play a cassette tape recorded using  
Dolby B Noise Reduction, press the 5 (DOLBY  
B) button to activate or deactivate Dolby B Noise  
Reduction.  
To stop tape play and eject the cassette tape,  
press the eject (c) button on the cassette player.  
20-EN  
Program Sensor  
1
Lightly press the 1 (g) button once during  
tape play to return to the beginning of the  
program being currently played. If you wish to  
return to a program further back, press  
repeatedly until the number of programs you  
would like to skip is obtained.  
2
Lightly press the 3 (f) button once during  
tape play to advance to the beginning of the next  
program. If you wish to advance to a program  
further ahead, press repeatedly until the number  
of programs you would like to skip is obtained.  
Repeat Play  
1
Press the 4 (REPEAT) button to play back  
repeatedly the program being currently played.  
To stop the repeat play, press the 4 (REPEAT)  
button until the REPEAT indicator disappears.  
Blank Skip  
1
Press the 6 (B.SKIP) button during tape play to  
skip over blank portions of the tape lasting 15  
seconds or longer.  
To deactivate the blank skip mode, press the 6  
(B.SKIP) button for a second time.  
21-EN  
DVD/Video CD/CD Player/DVD changer Operation (Optional)  
(IVA-C801)  
(CVA-1006)  
1 2 3 4 5  
1 2 3 4 5  
SOURCE  
SOURCE  
LIST Rotary encoder  
LIST  
Rotary encoder  
Now, the locking system for the AUX mode operation  
has been released. Unless the ignition key is turned  
to the OFF position, the AUX mode can be activated  
by engaging the parking brake without performing  
the above procedure (1 through 3).  
Playing DVD/Video CD/CD  
If an optional Alpine DVD/video CD/CD player is  
connected to the IVA-C801/CVA-1006, you can  
control it from the IVA-C801/CVA-1006.  
Each time the ignition key is turned to the OFF  
position, perform the above procedure.  
WARNING  
It is dangerous (and illegal in many states) for the  
driver to watch the TV/Video while driving the  
vehicle. The driver may be distracted from looking  
ahead and an accident could occur.  
NOTE  
If you try to activate the auxiliary device while driving, the  
display will show the warning-CAN'T OPERATE WHILE  
DRIVING.  
1
2
Press the SOURCE button to display the main  
menu screen.  
Install the IVA-C801/CVA-1006 correctly so that  
the driver cannot watch TV/Video unless the  
vehicle is stopped and the emergency brake is  
applied.  
Rotate the rotary encoder and select "DVD" from  
the menu. Then, press the rotary encoder to  
execute the selection.  
The display shows the DVD player mode screen.  
Insert a disc into the DVD/video CD/CD player,  
the player starts playing.  
If the IVA-C801/CVA-1006 is not installed  
correctly, the driver will be able to watch the TV/  
Video while driving the vehicle and may be  
distracted from looking ahead causing an  
accident. The driver or other people could be  
severely injured.  
NOTE  
Press the 6 (F.GUIDE) button during DVD/video CD/  
CD play to turn on or off the Function Guide display.  
In the ON position:  
The Function Guide display will always be shown.  
In the OFF position:  
To activate your auxiliary devices:  
The Function Guide display will disappear after  
approx. 5 seconds if no button is pressed.  
If you want to display the Function Guide screen  
again, press any one of the Function buttons 1  
through FUNC .  
To watch a video source, your vehicle must be  
parked with the ignition key in the ACC or ON  
position. To do this, follow the procedure below.  
1. Push the foot brake to bring your vehicle to a  
complete stop at a safe location. Engage the  
parking brake.  
2. Keep pushing the foot brake and release the  
parking brake once then engage it again.  
3. While the parking brake is being engaged the  
second time, release the foot brake.  
Still/Pause  
1
Press the 2 (:/J) button during DVD/video CD/  
CD play to freeze frame or pause. To resume  
normal play, press the 2 (:/J) button for a  
second time.  
NOTE  
For automatic transmission vehicles, place the transmission  
lever in the Park position.  
22-EN  
Chapter (DVD)/Track (Video CD)  
Sensor  
Playing tracks in random order  
(M.I.X.)(Video CD/CD)  
1
Lightly press the 1 (g) or 3 (f) button  
during DVD/video CD/CD play to return to the  
beginning of the chapter/track being currently  
played or advance to the beginning of the next  
chapter/track respectively.  
You can play all the tracks in random order.  
You can use the M.I.X. function only on the  
connected DVD player equipped with the M.I.X.  
function.  
NOTE  
1
Press the 5 (M.I.X.) button while playing the Video  
CD or CD. All the tracks play in random order.  
To cancel M.I.X play and return to the original  
play order, Press the 5 (M.I.X.) button again.  
The word "chapter or track" means a division of the  
recorded picture/sound on a DVD/video CD/CD  
respectively.  
NOTES  
Fast Forward/Backward  
You cannot use the repeat play mode during M.I.X. play.  
The M.I.X. play mode cannot be used on video CDs with  
the playback control (PBC). Press "MENU" to turn the  
PBC function off. For more details, see the operating  
instructions of your DVD player or DVD changer.  
1
Press and hold the 1 (g) or 3 (f) button  
during play to fast backward or forward  
respectively. Release the button when you reach  
the desired portion you wish to play. Playback  
starts from that portion.  
Displaying List of Disc Titles  
Repeat Play  
If titles have been memorized for Video CDs/CDs,  
the list of the Video CDs/CD titles can be displayed  
and Video CDs/CDs can be selected by their titles.  
(For Titling Radio stations/CDs, see page 38.)  
1
Press the 4 (REPEAT) button during play to  
repeatedly play the chapter/track or title/disc  
being currently played.  
Each press changes the repeat play as follows:  
DVD:  
1
Press the LIST button in the DVD/DVD changer  
mode.  
Chapter  
Title  
Repeat Off  
The list of disc titles will be displayed and  
memorized titles will be displayed also. When  
DVD disc is inserted, "DVD VIDEO" will be  
displayed. Depending on the DVD product, "NO  
TITLE CD" may be displayed as well.  
(repeat play) (repeat play) (normal play)  
Video CD/CD:  
Track  
(repeat play)  
Disc  
(repeat play)  
NOTE  
2
3
Rotate the rotary encoder and select (highlight)  
your desired disc title to play.  
The track/disc repeat modes cannot be used on video  
CDs with playback control (PBC). Press "MENU" to  
turn the PBC function off. For more details, see the  
operating instructions of your DVD player or DVD  
changer.  
Press the rotary encoder to execute the  
selection.  
The selected title plays, the title list screen  
closes, and the DVD mode main screen or DVD  
changer mode main screen appears.  
NOTES  
If the disc is not titled, the display shows "NO TITLE  
CD." If no disc is loaded, the display shows "NO DISC."  
When the DVA-5200 and DVA-5205 are connected:  
To display the list of disc titles, switch to the DVD  
main screen mode and press the LIST button while  
playing the video CD or CD.  
Pressing the LIST or FUNC (RETURN) button while  
the list of the disc titles is being displayed, changes the  
display back to the DVD/DVD Changer mode screen.  
IVA-C801:  
Pressing the 2 button displays the title list or the  
track title list only when a CD with text is loaded in  
the built-in CD player.  
CVA-1006:  
When a CD/MD player or changer is connected,  
pressing the 2 button displays the title list.  
23-EN  
DVD/Video CD/CD Player/DVD changer Operation (Optional)  
(IVA-C801)  
(CVA-1006)  
Function buttons  
(1 through 6)  
6
Function buttons  
(1 through 6)  
6
SOURCE  
CHG  
SOURCE Rotary encoder  
CHANGER  
Rotary encoder  
Controlling DVD Changer  
If an optional Alpine DVD changer is connected to  
the IVA-C801/CVA-1006, the DVD changer can be  
controlled from the IVA-C801/CVA-1006.  
You can directly select the DVD changer mode by  
pressing the CHG (IVA-C801) or CHANGER (CVA-  
1006) button.  
1
2
Press the SOURCE button to display the main  
menu.  
Rotate the rotary encoder to select "DVD CHG,"  
then press the rotary encoder.  
The display changes to the DVD changer mode  
screen.  
3
When a 6-Disc DVD Changer is connected.  
Press the 6 (F.GUIDE) button. The Function  
Guide display changes.  
Press the Function buttons to select your desired  
disc loaded. The Function buttons 1 (DISC1)  
through 6 (DISC6) select the discs from the first  
disc to 6th disc. For example, press the 3 (DISC  
3) button to select the third disc.  
NOTES  
To select your desired track number on the selected  
disc, lightly press the 1 (g) or 3 (f)  
repeatedly until your desired track number is  
displayed.  
After selecting the desired, you can operate in the  
same way as for the DVD/Video CD/CD player. For  
details please see the DVD/Video CD/CD player  
operation section.  
* If both the CD Changer and DVD Changer are  
connected, each pressing of the CHG (CHANGER)  
button changes between the CD Changer mode and  
the DVD Changer mode.  
24-EN  
Navigation System Operation (Optional)  
(IVA-C801)  
(CVA-1006)  
SOURCE  
Rotary encoder  
Rotary encoder  
SOURCE  
Controlling Navigation System  
If an optional Alpine Navigation System is  
connected to the IVA-C801/CVA-1006, some of its  
functions can be controlled from the IVA-C801/  
CVA-1006.  
The functions and display indicators available will  
vary depending upon the Navigation System  
connected. For details, consult your Alpine dealer.  
1
2
Press the SOURCE button. The main menu  
screen appears on the display.  
Rotate the rotary encoder and select "NAVI,"  
then press the rotary encoder to execute the  
selection.  
The Function Guide display changes to show the  
same button names as those for the remote  
control supplied with your navigation system.  
NOTES  
When the V. SEL button is pressed while the  
Navigation selection mode is being selected in the  
VISUAL setting (refer to page 43), the navigation  
mode will be directly activated.  
If the Navigation mode menu is not displayed on the  
main menu screen, select "AUX IN" in the Setup mode  
screen and set the Navigation mode to the ON  
position.  
If you use the buttons displayed, you can control the  
navigation system from IVA-C801/CVA-1006 in the  
similar way to the remote control operation.  
For operation, refer to the Owner's Manual for your  
navigation system.  
Depending on the navigation system connected to this  
unit, some functions and displays may vary.  
25-EN  
Auxiliary Device Operation (Optional)  
(IVA-C801)  
(CVA-1006)  
SOURCE  
Rotary encoder  
Rotary encoder  
SOURCE  
Now, the locking system for the AUX mode operation  
has been released. Unless the ignition key is turned  
to the OFF position, the AUX mode can be activated  
by engaging the parking brake without performing  
the above procedure (1 through 3).  
Operating Auxiliary Devices  
To operate your devices connected to the AUX  
terminals on the rear panel of IVA-C801/CVA-1006,  
follow the procedure described below.  
Each time the ignition key is turned to the OFF  
position, perform the above procedure.  
WARNING  
It is dangerous (and illegal in many states) for the  
driver to watch the TV/Video while driving the  
vehicle. The driver may be distracted from looking  
ahead and an accident could occur.  
NOTE  
If you try to activate the auxiliary device while driving, the  
display will show the warning-CAN'T OPERATE WHILE  
DRIVING.  
1
2
Press the SOURCE button.  
The main menu screen appears on the display.  
Install the IVA-C801/CVA-1006 correctly so that  
the driver cannot watch TV/Video unless the  
vehicle is stopped and the emergency brake is  
applied.  
Rotate the rotary encoder and select "AUX", then  
press the rotary encoder to execute the  
selection.  
If the IVA-C801/CVA-1006 is not installed  
correctly, the driver will be able to watch the TV/  
Video while driving the vehicle and may be  
distracted from looking ahead causing an  
accident. The driver or other people could be  
severely injured.  
NOTE  
If the AUX mode is not displayed on the main menu,  
select "AUX IN" in the Setup mode screen. Either AUX1  
or AUX2 should be turned ON.  
To activate your auxiliary devices:  
To watch a video source, your vehicle must be  
parked with the ignition key in the ACC or ON  
position. To do this, follow the procedure below.  
1. Push the foot brake to bring your vehicle to a  
complete stop at a safe location. Engage the  
parking brake.  
2. Keep pushing the foot brake and release the  
parking brake once then engage it again.  
3. While the parking brake is being engaged the  
second time, release the foot brake.  
NOTE  
For automatic transmission vehicles, place the transmission  
lever in the Park position.  
26-EN  
Audio Processor Operation (Optional)  
(IVA-C801)  
(CVA-1006)  
Function buttons  
Function buttons  
(1 through 6)  
(1 through 6)  
FUNC  
FUNC  
4
4
SOURCE  
Rotary encoder  
SOURCE  
Rotary encoder  
NOTE  
Selecting Factory (Maker's)  
Equalization Presets  
When the FUNC (RETURN) button is pressed, the  
display returns to the previous screen.  
Tip  
In the equalizer mode, for example, you can horizontally  
scroll each of the mode screens by rotating the rotary  
encoder to the left or right. You can also adjust the  
volume level by pressing and rotating the rotary encoder  
(DHE, Surround, BBE, listening position, time collection  
mode main screen only).  
If an optional Alpine Equalizer is connected to the  
IVA-C801/CVA-1006, the Equalizer can be  
controlled from the IVA-C801/CVA-1006.  
Six equalization curves are preset on the  
Equalizer at the factory.  
1
2
3
Press the SOURCE button.  
The main menu screen appears on the display.  
Press the 4 (A.PROC) button to display the list  
of the Audio Processors (A.PROC).  
Rotate the rotary encoder and select "Equalizer."  
Then press the rotary encoder to execute the  
selection.  
The display changes to the Equalizer mode  
screen.  
4
5
Select a desired Equalizer characteristic curve  
and press the corresponding Function button  
(1 (FLAT) through 6 (NEWS)).  
You can select your desired equalizer  
characteristic curve from 6 preset characteristic  
curves; FLAT, MALE, FEMALE, POPS, ROCK  
and NEWS.  
When you have selected your desired  
characteristic curve, press the FUNC (RETURN).  
The display returns to the Audio Processor List  
screen.  
27-EN  
Audio Processor Operation (Optional)  
(IVA-C801)  
(CVA-1006)  
Function buttons  
(1 through 6)  
Function buttons  
(1 through 6)  
FUNC  
FUNC  
1
4
1
4
SOURCE  
Rotary encoder  
Rotary encoder  
SOURCE  
Creating Personal Equalizer  
Characteristic Curves  
Selecting Factory Surround Mode  
Presets  
You can create your own equalizer characteristic  
curves. The following is the procedure.  
Depending upon the music source you listen to,  
you can choose your desired surround mode from  
6 factory-preset surround modes.  
NOTE  
The Parking Brake must be engaged to access the  
Equalizer Adjustment mode screen. Attempting to access  
this screen while driving will display the warning-CAN'T  
OPERATE WHILE DRIVING.  
1
2
3
Press the SOURCE button.  
The main menu screen appears.  
Press the 4 (A.PROC) button.  
The Audio Processor list will be displayed.  
1
2
3
Display the equalizer mode screen by pressing  
one of the Function buttons 1 (FLAT) through  
6 (NEWS) to select the desired characteristic  
curve you wish to change.  
Turn the rotary encoder and select "Surround"  
then press the rotary encoder.  
The Surround mode screen appears.  
Press and hold the FUNC (RETURN) button for  
at least 2 seconds.  
The display changes to show the equalizer  
adjustment screen .  
4
Press the Function button (1 through 6) that  
has your desired surround mode.  
NOTE  
You can choose from 6 factory preset surround modes  
(NORMAL, STADIUM, LIVE, CHURCH, DANCE, and  
HALL).  
Rotate the rotary encoder clockwise or  
counterclockwise to select the frequency that  
you wish to adjust. The color of the frequency  
changes when it is selected.  
5
Press the FUNC (RETURN) when your selection  
has been made.  
The display returns to the Audio Processor List  
screen.  
4
5
Press the rotary encoder to execute the  
selection.  
Tip  
Make level adjustments by rotating the rotary  
encoder. Press and release the rotary encoder  
at the desired level.  
When the FUNC (RETURN) button is pressed, the  
display returns to the previous screen.  
Repeat the above steps to adjust other  
frequencies.  
6
When the adjustments have been completed,  
press the FUNC (RETURN) button.  
The display changes to the Equalizer mode  
screen.  
28-EN  
Adjusting Surround Levels and  
Surround Delay Time  
Selecting DHE (Digital Harmonic  
Enhancer) Mode  
If your equalizer connected is equipped with the  
surround level/time adjustment feature, you can  
adjust the surround sound levels and surround  
delay time to suit to your preference.  
The DHE mode enhances the sound of musical  
instruments or vocals, while masking road noises  
of a moving vehicle. The result is music with more  
clarity.  
1
2
3
Display the surround mode screen and press  
one of the Function buttons 2 (STADIUM)  
through 6 (HALL) (except "NORMAL") that has  
the surround mode you wish to adjust.  
1
2
3
Press the SOURCE button.  
The main menu screen appears on the display.  
Press the 4 (A.PROC) button to display the  
Audio Processor List screen.  
Press and hold the FUNC (RETURN) button for  
at least 2 seconds.  
The display changes to the surround adjustment  
screen.  
Rotate the rotary encoder and select "DHE,"  
then press the rotary encoder to execute the  
selection.  
The DHE mode screen appears.  
Press the rotary encoder to select the surround  
delay time or surround level that you wish to  
adjust.  
Each press toggles between the surround delay  
time and surround level modes.  
4
Press one of the Function buttons 2 (MODE1)  
through 6 (MODE5) that has your desired DHE  
mode. There are 5 modes as follows.  
When the 1 (OFF) button is pressed, the DHE  
mode will be deactivated.  
4
5
Turn the rotary encoder clockwise or  
Beat MAX (MODE1)  
Enhances the rhythmic bass sound to  
make very harmonic bass sound.  
counterclockwise to adjust the surround sound  
level or delay time to your preference.  
After adjustment press the rotary encoder.  
Lyric MAX (MODE2)  
Enhances voice of female singers to make it brighter.  
When your adjustments are complete, press the  
FUNC (RETURN) button.  
The display returns to the Surround mode  
screen.  
Beat MIX (MODE3)  
Balances the bass sound to make it brighter.  
Lyric MIX (MODE4)  
Reproduces voice of female singers clearer.  
Phase MIX (MODE5)  
Reproduces any kind of music sources  
more balanced and crisp.  
5
When you have selected your desired DHE  
mode, press the FUNC (RETURN) button.  
The display returns to the Audio Processor List  
screen.  
Tip  
When the FUNC (RETURN) button is pressed, the  
display returns to the previous screen.  
29-EN  
Audio Processor Operation (Optional)  
(IVA-C801)  
(CVA-1006)  
Function buttons  
Function buttons  
(2 through 6)  
(2 through 6)  
1
4
1
4
FUNC  
FUNC  
SOURCE  
Rotary encoder  
Rotary encoder  
SOURCE  
Setting DHE Power or Fine Mode  
Selecting BBE Mode  
The DHE Power and Fine modes enhance the  
DHE effects. Power makes coarse adjustments to  
the overall balance whereas Fine will make more  
subtle changes. Listen to how each mode affects  
the music and select the one most pleasing to  
your taste.  
The BBE (Barcus Berry Electronics) Surround  
Processor is designed to return the natural  
balance of harmonic time alignment, which  
disappears when the sound signal is amplified  
and reproduced by loudspeakers. The result of  
this processing is crisp, clean sound with tighter  
transients and sharper imaging. If you make the  
BBE adjustments after adjusting the surround  
settings, the audible processing result will be  
enhanced remarkably.  
1
Activate the DHE mode, then press one of the  
Function buttons 2 (MODE1) through 6  
(MODE5) that has the desired DHE mode to be  
adjusted.  
1
Press the SOURCE button.  
The main menu screen appears in the display.  
2
3
Press and hold the FUNC (RETURN) button for  
at least 2 seconds.  
The DHE adjustment mode is activated.  
2
3
Press the 4 (A.PROC) button. The Audio  
Processor List screen is displayed.  
Press the rotary encoder to select the desired  
mode either DHE Power or DHE Fine mode,  
then rotate the rotary encoder to select the ON  
or OFF mode. Each press toggles between the  
Power/Fine on and off modes.  
Rotate the rotary encoder and select "BBE" from  
the list displayed. Press the rotary encoder to  
execute the selection.  
The display changes to the BBE mode screen.  
When it is set to the ON mode, the DHE effects  
will be enhanced.  
4
Select a desired BBE mode and press the  
corresponding Function button, 2 (MODE1)  
through 4 (MODE3). The effect is proportionally  
reduced for the BBE-2 and BBE-3 has the least  
effect.  
Effect of the Power On mode:  
More powerful bass sound and crisp, clear  
sound will be produced.  
Effect of the Fine On mode:  
Vocal/chorus music will be refined and  
becomes clearer.  
To deactivate the BBE mode, press the 1 (OFF)  
button.  
5
When the setting has been completed, press the  
FUNC (RETURN) button.  
Tip  
When the FUNC (RETURN) button is pressed, the  
display returns to the previous screen.  
30-EN  
Customizing BBE Mode  
Adjusting Listening Position  
1
Activate the L.P.S. mode and select the listening  
position you wish to adjust by referring to  
"Selecting Listening Position" section.  
This function is operative only when an audio  
processor equipped with the BBE level (Low and  
High) adjustment feature is connected.  
2
Press and hold the FUNC (RETURN) button for  
at least 2 seconds.  
The display changes to the L.P.S. Adjustment  
mode.  
1
Activate the BBE mode (see the previous page),  
then press the Function button 2 (MODE1)  
through 4 (MODE3) that has the BBE mode you  
wish to adjust.  
3
4
Press the rotary encoder and select "F/R" (Front/  
Rear) or "L/R" (Left/Right) you wish to adjust.  
2
3
Press and hold the FUNC (RETURN) button for  
at least 2 seconds.  
The BBE adjustment mode is activated.  
Rotate the rotary encoder to adjust to the  
desired listening position.  
When the rotary encoder is rotated in the F/R  
mode, the cursor moves forward or backward,  
and when it is rotated in the L/R mode, the  
cursor moves to the left or right.  
Press the rotary encoder to select "HI LEVEL" or  
"LOW LEVEL." Each press toggles between "HI  
LEVEL" and "LOW LEVEL."  
4
5
Rotate the rotary encoder and adjust the level to  
your desired level.  
5
When adjustment has been completed, press the  
FUNC (RETURN) button.  
The display returns to the L.P.S. mode screen.  
When adjustment is complete, press the FUNC  
(RETURN) button. The display returns to the  
BBE mode screen.  
Selecting Listening Position  
You can select the listening position for optimum  
sound field depending on the number of  
passengers in the vehicle.  
1
2
3
Press the SOURCE button.  
The main menu screen appears on the display.  
Press the 4 (A.PROC) button. The Audio  
Processor List screen appears.  
Rotate the rotary encoder and select L.P.S.  
(Listening Position Setting) in the menu. Press  
the rotary encoder to execute the selection. The  
display changes to the L.P.S. (Listening Position  
Selection) mode screen.  
4
5
Press the Function button 2 (ALL) through 5  
(FRONT/RIGHT) that has your desired listening  
position.  
NOTES  
The black squares show the listening positions.  
When the 1 (OFF) button is pressed, the L.P.S. mode  
is deactivated.  
When selection has been completed, press the  
FUNC (RETURN) button.  
The display returns to the Audio Processor List  
screen.  
Tip  
When the FUNC (RETURN) button is pressed, the  
display returns to the previous screen.  
31-EN  
Audio Processor Operation (Optional)  
(IVA-C801)  
(CVA-1006)  
FUNC  
FUNC  
1 2  
4
6
1 2  
4 6  
SOURCE  
Rotary encoder  
Rotary encoder  
SOURCE  
Adjustment of Time Correction  
Value  
Adjusting Cross-Over (X-Over)  
Point of 2-Way Divider  
1
2
3
Press the SOURCE button.  
The main menu appears on the display.  
If an optional Alpine Channel Divider PRA-H400  
is connected, you can control the Divider from the  
IVA-C801/CVA-1006.  
Use this procedure when one or two 2-way-  
system or 3-way system channel dividers are  
connected.  
Press the 4 (A.PROC) button.  
The Audio Processor List appears.  
Rotate the rotary encoder and select the "Time-  
Corr." (Time-Correction), then press the rotary  
encoder.  
The display changes to the Time-Correction  
mode screen.  
1
2
Press the SOURCE button.  
The main menu screen appears on the display.  
Press the 4 (A.PROC) button.  
The display shows the Audio Processor list  
screen.  
4
5
Press and hold the FUNC (RETURN) button for  
at least 2 seconds.  
The display changes to the Time-Correction  
Adjustment mode screen.  
3
Rotate the rotary encoder and select the  
"Divider" (when one divider is connected) or  
"Divider-F and Divider-R" (when two dividers are  
connected), then press the rotary encoder to  
execute the selection.  
Press the rotary encoder repeatedly to select the  
position (seat) you wish to adjust.  
Each press changes the seat positions as  
follows:  
The display changes to the Divider mode screen.  
Fr/Left Fr/Righ Rear/Left Rear/Right  
4
5
Press and hold the FUNC (RETURN) button for  
at least 2 seconds.  
The mode changes to the Divider Adjustment  
mode.  
6
7
Rotate the rotary encoder clockwise or  
counterclockwise to increase or decrease the  
Time-Correction value respectively to your  
desired value.  
Press the 1 (X-OVER) button.  
The mode changes to the Cross-Over  
Adjustment mode.  
When adjustment has been completed, press the  
FUNC (RETURN) button. The display returns to  
the Time-Correction mode screen.  
Tip  
When the FUNC (RETURN) button is pressed, the  
display returns to the previous screen.  
32-EN  
Adjusting Levels  
6
Press the rotary encoder and select the channel  
that you wish to adjust.  
Each press changes the channel as follows.  
1
Press and hold the FUNC (RETURN) button for  
at least 2 seconds in the Divider mode.  
The mode changes to the Divider Adjustment  
mode.  
When only one 2-way divider is connected:  
Low  
F-High  
R-High  
2
3
Press the 2 (LEVEL) button. The mode changes  
to the Level Adjustment mode.  
When two 2-way dividers are connected:  
Low  
High  
Press the rotary encoder and select the channel  
you wish to adjust.  
Each press changes the channels as follows:  
Each time the 6 (F/R) button is pressed,  
the mode switches between the Front  
adjustment and Rear adjustment modes,  
and the display also changes.  
When only one 2-way system divider is  
connected:  
L-Low R-Low F-High/L  
R-High/R R-High/L F-High/R ←  
Low  
High  
When two 2-way system dividers are  
connected:  
When only one 3-way divider is connected:  
Low Mid-L Mid-H High  
L-Low R-Low L-High R-High  
Each time the 6 (F/R) button is pressed,  
the mode switches between the Front  
adjustment, and Rear adjustment modes,  
and the display also changes.  
When two 3-way dividers are connected:  
Low Mid-L Mid-H High  
Each time the 6 (F/R) button is pressed,  
the mode switches between the Front  
adjustment and Rear adjustment, and the  
display also changes.  
L-Low R-Low L-High R-High  
When only one 3-way divider is connected:  
L-Low R-Low L-Mid R-Mid L-High R-High  
Low Mid-L Mid-H High  
7
8
Rotate the rotary encoder clockwise or  
counterclockwise to adjust the Cross-Over point  
upward or downward to your desired point.  
When two 3-way dividers are connected:  
L-Low R-Low L-Mid R-Mid L-High R-High  
When the adjustment has been completed, press  
the FUNC (RETURN) button. The display returns  
to the Divider mode screen.  
Each time the 6 (F/R) button is pressed,  
the mode switches between the Front  
adjustment and Rear adjustment modes,  
and the display also changes.  
L-Low R-Low L-Mid R-Mid L-High R-High  
4
5
Rotate the rotary encoder clockwise or  
counterclockwise to adjust to your desired level  
upward or downward respectively.  
When adjustments have been completed, press  
the FUNC (RETURN) button.  
The display returns to the Divider mode.  
33-EN  
Audio Processor Operation (Optional)  
(CVA-1006)  
(IVA-C801)  
Function buttons  
(1 through 6)  
Function buttons  
(1 through 6)  
FUNC  
FUNC  
3 4  
6
3 4 6  
SOURCE  
Rotary encoder  
Rotary encoder  
SOURCE  
When two 3-way dividers are connected:  
L-Low R-Low L-Mid R-Mid L-High R-High  
Adjusting Time-Correction for 2-  
Way Speaker System  
Each time the 6 (F/R) button is pressed,  
the mode switches between the Front  
adjustment and Rear adjustment modes,  
and the display also changes.  
Use this procedure to adjust the sound time  
difference between the speakers.  
1
Press and hold the FUNC (RETURN) button for  
at least 2 seconds in the Divider mode.  
The mode changes to the Divider Adjustment  
mode.  
L-Low R-Low L-Mid R-Mid L-High R-High  
4
5
Rotate the rotary encoder clockwise or  
counterclockwise to adjust the time correction  
value upward or downward respectively.  
2
3
Press the 3 (T-CORR.) button.  
The mode changes to the Time Correction  
Adjustment mode.  
When adjustments have been completed, press  
the FUNC (RETURN) button.  
The display returns to the Divider mode screen.  
Press the rotary encoder and select the channel  
you wish to adjust.  
Each press changes the channels as follows:  
When only one 2-way divider is connected:  
L-Low R-Low F-High/L  
R-High/R R-High/L F-High/R ←  
When two 2-way dividers are connected:  
L-Low R-Low L-High R-High  
Each time the 6 (F/R) button is pressed,  
the mode switches between the Front  
adjustment and Rear adjustment modes,  
and the display also changes.  
L-Low R-Low L-High R-High  
When only one 3-way divider is connected:  
L-Low R-Low L-Mid R-Mid L-High R-High  
34-EN  
Memorizing Divider Settings  
Recalling Divider Settings  
Memorized Using Optional Divider  
You can store your settings of the divider(s) in  
memory when you have adjusted them.  
If an optional Alpine divider (such as PXA-H600/  
PXA-H510) is connected, you can recall the  
settings memorized using the optional divider.  
1
After adjusting the divider(s), display the Divider  
mode screen.  
Press and hold any one of the Function buttons  
1 (P.SET1) through 4 (P.SET4) for at least 2  
seconds.  
The indicators for the 4 buttons blink for 5  
seconds.  
1
2
3
4
Press the SOURCE button.  
The main menu is displayed on the display.  
Press the 4 (A.PROC) button.  
The Audio Processor List screen is displayed.  
2
While the indicators are still blinking, press the  
Function button into which you want to  
memorize (preset) the divider settings.  
Repeat the above steps to memorize 3 other  
divider settings.  
Rotate the rotary encoder and select "Adaptive  
EQ." The Function Guide screen is displayed.  
Press the Function button 1 (P.SET1) through  
6 (P.SET6) that has your desired setting  
memorized using the optional divider.  
5
Press the FUNC (RETURN) button.  
The display returns to the main menu screen.  
Recalling Memorized Divider  
Settings Using Function Buttons  
Memorizing Characteristic Curves  
1
Display the Divider mode screen.  
Press the Function button 1 (P.SET1) through  
4 (P.SET4) that has your desired divider  
settings.  
The divider setting stored at the Function button  
will be recalled.  
Equalization characteristic curves created by  
yourself or factory preset can be stored in  
memory. (See page 27.)  
1
Select one of the factory preset characteristic  
curves or make your own (personal)  
characteristic curve. Then, display the Audio  
Processor List and select "Private Memo."  
Tip  
You can also recall your desired divider settings  
memorized by pressing the 4 (;P.DN) or 5 (:P.UP)  
button in the Divider mode.  
2
Press and hold any one of the Function buttons  
1 (P.SET1) through 6 (P.SET6) for at least 2  
seconds.  
The Function Guide indicators P.SET1 through  
P.SET6 in the preset mode display blink  
indicating that you can memorize the  
characteristic curve.  
3
While the Function Guide indicators are blinking,  
press the Function button 1 (P.SET1) through  
6 (P.SET6) into which you wish to memorize the  
characteristic curve.  
Now, the characteristic curve has been  
memorized.  
Repeat this procedure to memorize other  
characteristic curves.  
NOTE  
This unit can memorize curves together with the settings  
of the equalizer, DHE, BBE and Surround Time  
Correction.  
35-EN  
Audio Processor Operation (Optional)  
(CVA-1006)  
(IVA-C801)  
Function buttons  
(1 through 6)  
Function buttons  
(1 through 6)  
Rotary encoder  
Rotary encoder  
Recalling Memorized  
Characteristic Curves Using  
Function Buttons  
Selecting Characteristic Curves  
from Displayed Audio Processor  
List  
1
Activate the desired mode, DHE, BBE, surround,  
time correction or equalizer, then press the  
Function button 1 (P.SET1) through 6 (P.SET6)  
that has your desired characteristic curve.  
You can select your desired characteristic curves  
directly from the Audio Processor (A.PROC) List  
without switching to individual mode screens.  
The selected characteristic curve is recalled.  
1
Display the Audio Processor List screen.  
Rotate the rotary encoder and select the desired  
mode by moving the cursor. The Function Guide  
for the selected mode is displayed.  
2
Press the Function buttons 1 through 6 that  
has your desired characteristic curve. The list  
shows the details of the curve selected.  
36-EN  
Other Useful Features  
(CVA-1006)  
(IVA-C801)  
SPE.ANA.  
SPE.ANA.  
Mode 3: This mode emphasizes the rhythmical  
bass sound and gives an image of vivid  
low frequencies.  
Displaying Spectrum Analyzer  
Depending on the external audio processor  
connected to the unit, this function may not work  
properly.  
1
2
While the main screen for a music source is  
displayed, press the SPE.ANA. button to turn on  
the spectrum analyzer mode.  
SCAN Display  
It displays mode1 to mode3 repeatedly.  
Each time you press the SPE.ANA. button, the  
spectrum analyzer modes change. There are  
three modes, select your desired mode to match  
the music being played.  
3
To deactivate the spectrum analyzer mode,  
press the SPE.ANA. button for at least 2  
seconds.  
Mode 1: This mode can be used for any genre  
of music.  
Mode 2: This mode is suitable to vocal song  
music.  
37-EN  
Other Useful Features  
(CVA-1006)  
(IVA-C801)  
1 2 3 4  
6
1 2 3 4  
6
SOURCE  
SOURCE INPUT Rotary encoder  
INPUT Rotary encoder  
Turning Defeat Mode On and Off  
Titling Radio Stations/CDs  
You can title radio stations and CDs. This manual  
describes how to title radio stations.  
When the defeat mode is on, the sound signals  
bypass the BBE and surround circuits and directly  
go to the line output. The equalizer curve,  
therefore, becomes flat.  
To display the Title Inputting screen:  
To watch a video source, your vehicle must be  
parked with the ignition key in the ACC or ON  
position. To do this, follow the procedure below.  
1
2
3
4
Press the SOURCE button. The main menu  
screen appears on the display.  
1. Push the foot brake to bring your vehicle to a  
complete stop at a safe location. Engage the  
parking brake.  
2. Keep pushing the foot brake and release the  
parking brake once then engage it again.  
3. While the parking brake is being engaged the  
second time, release the foot brake.  
Press the 4 (A.PROC) button. The display  
shows the Audio Processor List screen.  
Rotate the rotary encoder and select "Defeat."  
The Function Guide is displayed.  
Press the 2 (ON) button to turn on the defeat  
mode. The sound signals bypass the BBE and  
surround circuits.  
NOTE  
For automatic transmission vehicles, place the transmission  
lever in the Park position.  
To turn off the defeat mode, press the 1 (OFF)  
button.  
Now, the locking system for the Title Inputting  
screen operation has been released. Unless the  
ignition key is turned to the OFF position, the Title  
Inputting screen can be activated by engaging the  
parking brake without performing the above  
procedure (1 through 3).  
Each time the ignition key is turned to the OFF  
position, perform the above procedure.  
NOTE  
If trying to access this screen while driving will display the  
warning-CAN'T OPERATE WHILE DRIVING.  
38-EN  
NOTES  
1
2
Activate the radio mode.  
Tune in a radio station you wish to title.  
If the memory capacity for radio station titles is full and if  
you attempt to title a new station, the oldest title will be  
erased to make room for the new one. To delete a title,  
select the title you want to delete, then select "SPC"  
(space) and press the 6 (WRITE) button.  
When the 1 (; BACK) or 2 (NEXT -) button is  
pressed, the cursor moves to the left or right on the input  
titles.  
If an incorrect character has been entered, select "SPC"  
(space) and input a new character or press the 4  
(DELETE) button to delete the previous character. Press  
the 5 (CLEAR) button while inputting the titles to erase  
all the characters you have input.  
Press and hold the INPUT button for at least 2  
seconds.  
The Title Inputting screen appears in the display.  
3
Characters are displayed at the bottom menu.  
Rotate the rotary encoder and select the desired  
character for the first position.  
To change between upper case, lower case,  
numeral and symbol, press the 3 (A/1) button.  
Each press changes the bottom menu.  
Pressing the FUNC (RETURN) button in the Title Input  
mode changes the display back to the previous display.  
You can title the VIDEO CD/CD while it is in DVD or DVD  
changer mode. The title you entered is displayed in the  
Disc Title List display (P. 23).  
4
When the character for the first position has  
been selected, press the rotary encoder. The first  
character has been memorized at the first  
position. See "Notes" on this page.  
(Do not operate while driving. Stop the car, then use this  
operation.)  
5
6
Repeat steps 3 and 4 to enter the rest of  
characters.You can input up to 12 characters for  
titling one radio station (or CD).  
When DVA-5200 and DVA-5205 are connected:  
To display the title input screen, switch to the DVD main  
screen mode and press and hold the INPUT button for at  
least 2 seconds while playing the video CD or CD.  
To display the list of disc titles, switch to the DVD main  
screen mode and press the LIST button while playing the  
video CD or CD.  
Immediately after inputting titles or changing the settings  
of Setup Mode or Display Mode (While the system is  
inputting the titles or data automatically) do not turn the  
ignition key (engine key) to OFF.  
When titling has been completed, press the 6  
(WRITE) button to store the title in memory.  
The display changes to the Radio mode.  
To title other stations (or CDs), repeat this  
procedure.You can title up to 120 (max.) stations  
and CDs combined. The input titles will be  
displayed when a station (or CD) titled is  
selected.  
Otherwise, the title may not be written, or the settings may  
not be changed.  
39-EN  
Other Useful Features  
(CVA-1006)  
(IVA-C801)  
FUNC  
FUNC  
1 2 3  
6
1 2 3  
6
SOURCE  
SOURCE  
Rotary encoder  
Rotary encoder  
Adjusting Subwoofer Level  
(when subwoofer is used with  
other speakers)  
5
Press the rotary encoder repeatedly to select  
"SUB W." Each press changes the modes as  
follows:  
SUB.W. BAS. TRE. BAL. FAD. VOL.  
To display the initialization mode screen:  
To watch a video source, your vehicle must be  
parked with the ignition key in the ACC or ON  
position. To do this, follow the procedure below.  
6
7
Rotate the rotary encoder and adjust the  
subwoofer output level.  
When your adjustment has been completed,  
press the FUNC (RETURN) button.  
The display returns to the main menu.  
1. Push the foot brake to bring your vehicle to a  
complete stop at a safe location. Engage the  
parking brake.  
2. Keep pushing the foot brake and release the  
parking brake once then engage it again.  
3. While the parking brake is being engaged the  
second time, release the foot brake.  
NOTES  
For further information, please contact your Alpine  
dealer.  
When you connect a subwoofer, you need an amplifier  
with built-in low-pass filter.∗  
The low-pass filter passes only the frequencies  
below the selected cut-off frequency. Any high  
frequency content of the audio signal above the cut-  
off will be removed.  
NOTE  
For automatic transmission vehicles, place the transmission  
lever in the Park position.  
With the Setup screen displayed, pressing and rotating  
the rotary encoder can adjust the volume level.  
Immediately after inputting titles or changing the  
settings of Setup Mode or Display Mode (While the  
system is inputting the titles or data automatically) do  
not turn the ignition key (engine key) to OFF.  
Otherwise, the title may not be written, or the settings  
may not be changed.  
Now, the locking system for the initialization mode  
operation has been released. Unless the ignition  
key is turned to the OFF position, the initialization  
mode can be activated by engaging the parking  
brake without performing the above procedure (1  
through 3).  
Each time the ignition key is turned to the OFF  
position, perform the above procedure.  
1
2
3
4
Press the SOURCE button.  
The main menu appears on the display.  
Press the 6 (SETUP) button.  
The Setup mode screen is displayed.  
Rotate the rotary encoder and select "Sub wf."  
The Function Guide appears on the display.  
Press the 2 (ON) button to turn on the  
subwoofer.  
To turn off the subwoofer, press the 1 (OFF)  
button.  
40-EN  
Switching Phase  
Setting the External Device  
Interrupt Mode  
Use the phase-switching function after connecting  
your audio-processor, amplifier and subwoofer to  
the IVA-C801/CVA-1006.  
If an Alpine Ai-NET Auxiliary Input Adapter (KCA-  
801B) is connected to the IVA-C801/CVA-1006,  
an Auxiliary Source will be allowed to interrupt the  
current audio source. For example, you can listen  
to a portable MP3 player through your car audio  
system even with a CD changer connected and  
playing. The CD changer will automatically mute  
when switched to the AUX Input. For further  
details on how to use the Alpine KCA-801B, see  
your authorized Alpine dealer.  
NOTE  
After carrying out the steps 1 to 3 of "To display the Setup  
mode screen" described on page 40, perform the  
operation show below.  
1
2
3
4
Press the SOURCE button.  
The main menu appears on the display.  
Press the 6 (SETUP) button.  
The Setup mode screen is displayed.  
NOTE  
Rotate the rotary encoder and select "Sub Wf."  
The Function Guide is displayed.  
After carrying out the steps 1 to 3 of "To display the Setup  
mode screen" described on page 40, perform the  
operation show below.  
Press the 2 (0°) or 3 (180°) button to switch  
the phase of the subwoofer output.  
1
2
3
Press the SOURCE button.  
The main menu screen appears on the display.  
To turn off this function, press the 1 (OFF)  
button.  
Press the 6 (SETUP) button.  
The Setup mode screen appears on the display.  
5
When setting has been completed, press the  
FUNC (RETURN) button.  
Rotate the rotary encoder and select "IN-INT  
MUTE" from the Initialization mode screen. The  
Function Guide appears on the display.  
The display returns to the main menu screen.  
NOTE  
Immediately after inputting titles or changing the settings  
of Setup Mode or Display Mode (While the system is  
inputting the titles or data automatically) do not turn the  
ignition key (engine key) to OFF.  
Otherwise, the title may not be written, or the settings  
may not be changed.  
4
Press the 1 (OFF) button to turn off the mute  
mode.  
In the mute OFF mode:  
The volume level can be adjusted in the  
interrupt mode.  
NOTE  
When the mute ON mode is selected, sound will not  
produce.  
5
When your setting has been completed, press  
the FUNC (RETURN) button.  
The display returns to the main menu.  
NOTES  
Immediately after inputting titles or changing the  
settings of Setup Mode or Display Mode (While the  
system is inputting the titles or data automatically) do  
not turn the ignition key (engine key) to OFF.  
Otherwise, the title may not be written, or the settings  
may not be changed.  
The Auxiliary device being connected, must have an  
Interrupt wire with a positive trigger, for this function  
to operate automatically. Otherwise, a separate switch  
needs to be added to switch manually.  
41-EN  
Other Useful Features  
(CVA-1006)  
(IVA-C801)  
Function buttons  
(1 through 4)  
Function buttons  
(1 through 4)  
FUNC  
FUNC  
1 2 3  
6
1 2 3  
6
SOURCE  
V.SEL SOURCE  
Rotary encoder  
V.SEL  
Rotary encoder  
Setting Interrupt Icon Display  
(IN-INT)  
Interrupt Feature (MIX LEVEL)  
With an Alpine navigation system connected to  
the IVA-C801/CVA-1006, the voice guidance of  
the navigation system will be mixed with the radio  
or CD/MD play.You can adjust the volume level of  
the voice guidance.  
The unit can display the icon of the external  
device such as a telephone whenever a phone  
call comes in to tell you there is a phone call.  
NOTE  
You cannot use this function with an external  
amplifier.  
After carrying out the steps 1 to 3 of "To display the Setup  
mode screen" described on page 40, perform the  
operation show below.  
NOTE  
After carrying out the steps 1 to 3 of "To display the Setup  
mode screen" described on page 40, perform the  
operation show below.  
1
2
3
4
Press the SOURCE button.  
The main menu appears on the display.  
Press the 6 (SETUP) button.  
The Setup mode screen appears.  
1
2
3
Press the SOURCE button.  
The main menu screen appears on the display.  
Rotate the rotary encoder and select "IN-INT."  
The Function Guide is displayed.  
Press the 6 (SETUP) button.  
The Setup mode screen appears.  
Press 1 (TEL) button.  
Rotate the rotary encoder and select "MIX  
LEVEL."  
When the external device (telephone) sends the  
interrupt signal, the telephone icon appears on  
the display.  
When the 2 (INT.) button is pressed, the INT  
icon appears on the display.  
The Function Guide is displayed.  
4
Press the 2 (DOWN) or 3 (UP) button to adjust  
the volume level of the navigation system's voice  
guidance in 7 steps.  
NOTE  
To turn off the navigation interrupt mode, press  
the 1 (OFF) button.  
Immediately after inputting titles or changing the settings  
of Setup Mode or Display Mode (While the system is  
inputting the titles or data automatically) do not turn the  
ignition key (engine key) to OFF.  
5
Press the FUNC (RETURN) button to return to  
the main menu screen.  
Otherwise, the title may not be written, or the settings  
may not be changed.  
42-EN  
NOTES  
Setting Visual Mode  
Immediately after inputting titles or changing the  
settings of Setup Mode or Display Mode (While the  
system is inputting the titles or data automatically) do  
not turn the ignition key (engine key) to OFF.  
Otherwise, the title may not be written, or the settings  
may not be changed.  
When the voice guidance of the Navigation system  
starts to interrupt the audio, the display is  
automatically changed to the navigation screen.  
The volume level of the audio will be automatically  
reduced when the voice guidance of the Navigation  
system starts.  
For direct access to the different visual screens,  
preset the Navigation or the V. SEL mode.You can  
then display the screen of the preset item by just  
pressing the V. SEL button on the IVA-C801/CVA-  
1006.  
NOTE  
After carrying out the steps 1 to 3 of "To display the Setup  
mode screen" described on page 40, perform the  
operation show below.  
1
2
3
4
Press the SOURCE button.  
The main menu screen appears on the display.  
Setting Bass Frequency  
Press the 6 (SETUP) button.  
The Setup mode screen appears.  
1
2
3
4
Press the SOURCE button.  
The main menu appears on the display.  
Rotate the rotary encoder and select "VISUAL."  
The Function Guide is displayed.  
Press the 6 (SETUP) button.  
The Setup mode screen appears.  
Press the 1 (NAV.) or 2 (V. SEL) to preset the  
desired item.  
Rotate the rotary encoder and select "BASS  
Cont." to activate the Bass Control mode.  
When "NAVI" is preset: Pressing the V. SEL  
button directly switches to the navigation  
screen.  
Press the Function button 1 (60 Hz) through  
4 (100 Hz) that has the frequency you wish to  
control.  
When "V. SEL" is preset: Each press of the  
V. SEL button switches the modes:  
NAVI. AUX1 AUX2 DISPLAY  
5
Press the FUNC (RETURN) button.  
The display returns to the main menu screen.  
NOTES  
Immediately after inputting titles or changing the settings  
of Setup Mode or Display Mode (While the system is  
inputting the titles or data automatically) do not turn the  
ignition key (engine key) to OFF.  
NOTE  
Immediately after inputting titles or changing the settings  
of Setup Mode or Display Mode (While the system is  
inputting the titles or data automatically) do not turn the  
ignition key (engine key) to OFF.  
Otherwise, the title may not be written, or the settings  
may not be changed.  
Otherwise, the title may not be written, or the settings may  
not be changed.  
When an equalizer or digital sound processor is connected,  
this function is inoperative.  
After carrying out the steps 1 to 3 of "To display the Setup  
mode screen" described on page 40, perform the operation  
show below.  
43-EN  
Other Useful Features  
(CVA-1006)  
(IVA-C801)  
FUNC  
FUNC  
1 2 3 4  
6
1 2 3 4 6  
SOURCE  
SOURCE  
Rotary encoder  
Rotary encoder  
NOTES  
Selecting Rear Monitor  
If the DVD player or DVD changer is connected to the  
AUX1 terminal . The DVD picture appears by  
performing steps 1 and 2 of "Playing 2 Sources  
Simultaneously" on page 51. Then, perform steps 1 to  
4 on this page so the DVD picture and sound are  
output.  
To deactivate the mode, press the same button.  
If no particular picture is selected for the rear-seat  
monitor in the AUX OUT mode, the rear-seat monitor  
displays the same picture as for the IVA-C801/CVA-  
1006.  
If a rear-seat monitor and a navigation system are  
connected to the IVA-C801/CVA-1006, you can  
switch the picture/sound of the rear-seat monitor  
from the IVA-C801/CVA-1006.  
Immediately after inputting titles or changing the  
settings of Setup Mode or Display Mode (While  
the system is inputting the titles or data  
automatically) do not turn the ignition key (engine  
key) to OFF.  
After carrying out the steps 1 to 3 of "To display the  
Setup mode screen" described on page 40, perform the  
operation show below.  
Otherwise, the title may not be written, or the  
settings may not be changed.  
1
Press the SOURCE button.  
The main menu appears on the display.  
2
3
Press the 6 (SETUP) button.  
The Setup mode screen appears.  
Rotate the rotary encoder and select "AUX  
OUT."  
The Function Guide is displayed.  
4
Press the 1 (NAV.) button, the navigation  
screen will be displayed and the voice guidance  
will be produced on the rear-seat monitor if the  
navigation system is connected.  
When the 2 (AUX1) button is pressed, the  
picture/sound of the device connected to  
Terminal AUX 1 will be played on the rear-seat  
monitor.  
When the 3 (AUX2) button is pressed, the  
picture/sound of the device connected to  
Terminal AUX 2 will be played on the rear-seat  
monitor.  
44-EN  
Displaying Time  
5
6
Press the 3 ( DN) or 4 (UP ) button to  
delay or advance the minutes respectively.  
NOTE  
Press the FUNC (RETURN) button after  
adjusting the clock.  
The display returns to the main menu screen.  
After carrying out the steps 1 to 3 of "To display the Setup  
mode screen" described on page 40, perform the  
operation show below.  
NOTE  
Immediately after inputting titles or changing the  
settings of Setup Mode or Display Mode (While  
the system is inputting the titles or data  
automatically) do not turn the ignition key (engine  
key) to OFF.  
To quickly set the time to the nearest hour, press the 5  
(TIME RESET) button. If the displayed time is before the  
half hour, pressing the 5 (TIME RESET) button sets the  
clock back to the previous hour. If the displayed time is  
after the half hour, pressing the 5 (TIME RESET)  
button sets the clock forward to the beginning of the next  
hour.  
Otherwise, the title may not be written, or the  
settings may not be changed.  
Setting Daylight Saving Time  
1
2
3
Press the SOURCE button.  
The main menu appears on the display.  
NOTE  
Press the 6 (SETUP) button.  
The Setup mode screen appears.  
After carrying out the steps 1 to 3 of "To display the Setup  
mode screen" described on page 40, perform the  
operation show below.  
Rotate the rotary encoder and select "CLOCK  
DISP."  
The Function Guide appears.  
Immediately after inputting titles or changing the  
settings of Setup Mode or Display Mode (While  
the system is inputting the titles or data  
automatically) do not turn the ignition key (engine  
key) to OFF.  
4
5
Press the 1 (OFF) or 2 (ON) button to turn off  
or on the clock display respectively.  
Press the FUNC (RETURN) button.  
The display returns to the main menu screen.  
Otherwise, the title may not be written, or the  
settings may not be changed.  
Resetting Clock  
1
2
3
4
Press the SOURCE button.  
The main menu screen is displayed.  
NOTE  
Press the 6 (SETUP) button. The Setup screen  
is displayed.  
After carrying out the steps 1 to 3 of "To display the Setup  
mode screen" described on page 40, perform the  
operation show below.  
Rotate the rotary encoder and select "Summer  
Time." The Function Guide is displayed.  
Immediately after inputting titles or changing the  
settings of Setup Mode or Display Mode (While  
the system is inputting the titles or data  
automatically) do not turn the ignition key (engine  
key) to OFF.  
Press the 2 (ON) button to place the Summer  
Time mode ON.  
The time advances by one hour.  
To return to the ordinary time, press the 1  
(OFF) button.  
Otherwise, the title may not be written, or the  
settings may not be changed.  
5
Press the FUNC (RETURN) button.  
The display returns to the main menu screen.  
1
2
3
Press the SOURCE button.  
The main menu appears on the display.  
Press the 6 (SETUP) button.  
The Setup mode screen appears.  
Rotate the rotary encoder and select "CLOCK  
ADJ." to activate the clock adjustment mode.  
The Function Guide appears.  
4
Press the 1 ( DN) or 2 (UP ) button to  
delay or advance the hours respectively.  
45-EN  
Other Useful Features  
OPEN/CLOSE  
OPEN/CLOSE  
1 2 3  
5 6  
1 2 3  
5 6  
FUNC  
FUNC  
SOURCE  
(CVA-1006)  
(IVA-C801)  
SOURCE  
Rotary encoder  
Rotary encoder  
Sound (Beep) Guide Function  
Demonstration  
In the Demonstration mode, the unit performs  
scanning of the basic operation of each source.  
This function will give audible feedback with  
varying tones depending upon the button  
pressed.  
NOTE  
After carrying out the steps 1 to 3 of "To display the Setup  
mode screen" described on page 40, perform the  
operation show below.  
NOTE  
After carrying out the steps 1 to 3 of "To display the Setup  
mode screen" described on page 40, perform the  
operation show below.  
1
Press the SOURCE button.  
The main menu appears on the display.  
1
Press the SOURCE button.  
The main menu appears on the display.  
2
3
Press the 6 (SETUP) button.  
The Setup mode screen appears.  
2
3
4
Press the 6 (SETUP) button.  
The Setup mode screen appears.  
Rotate the rotary encoder and select "DEMO" to  
activate the Demonstration Selection mode.  
The display shows the Function Guide screen.  
Rotate the rotary encoder and select "BEEP."  
The Function Guide is displayed.  
4
Press the 2 (ON) button to activate the  
Demonstration mode. When the Demonstration  
mode is activated, the unit automatically starts  
the demonstration (simulation). The  
Press the 2 (ON) button to activate the Sound  
Guide mode. The display shows "BEEP ON."  
Press the 1 (OFF) button to deactivate the  
Sound Guide mode. The sound guide beep will  
not be produced when a button on the unit is  
pressed.  
demonstration continues until the demonstration  
mode is deactivated.  
To deactivate the demonstration mode, press the  
1 (OFF) button. The demonstration stops.  
5
When the setting has been completed, press the  
FUNC (RETURN) button.  
NOTE  
The display returns to the main menu screen.  
Immediately after inputting titles or changing the settings  
of Setup Mode or Display Mode (While the system is  
inputting the titles or data automatically) do not turn the  
ignition key (engine key) to OFF.  
NOTE  
Immediately after inputting titles or changing the settings  
of Setup Mode or Display Mode (While the system is  
inputting the titles or data automatically) do not turn the  
ignition key (engine key) to OFF.  
Otherwise, the title may not be written, or the settings  
may not be changed.  
Otherwise, the title may not be written, or the settings  
may not be changed.  
46-EN  
Setting Automatic Opening/  
Closing of Monitor  
Adjusting Brightness of Picture  
To switch to the display mode screen or to the  
picture mode:  
When the Automatic Opening/Closing mode is  
"ON," the monitor automatically opens when the  
ignition key is turned to the "ACC" or "ON"  
position. The monitor automatically closes when  
the ignition key is turned OFF.  
To watch a video source, your vehicle must be  
parked with the ignition key in the ACC or ON  
position. To do this, follow the procedure below.  
1. Push the foot brake to bring your vehicle to a  
complete stop at a safe location. Engage the  
parking brake.  
2. Keep pushing the foot brake and release the  
parking brake once then engage it again.  
3. While the parking brake is being engaged the  
second time, release the foot brake.  
NOTE  
After carrying out the steps 1 to 3 of "To display the Setup  
mode screen" described on page 40, perform the  
operation show below.  
1
2
3
Press the SOURCE button.  
The main menu appears on the display.  
NOTE  
For automatic transmission vehicles, place the transmission  
lever in the Park position.  
Press the 6 (SETUP) button.  
The Setup mode screen appears.  
Now, the locking system for the Display mode  
operation has been released. Unless the ignition key  
is turned to the OFF position, the Display mode can  
be activated by engaging the parking brake without  
performing the above procedure (1 through 3).  
Each time the ignition key is turned to the OFF  
position, perform the above procedure.  
Rotate the rotary encoder and select "AUTO  
OPEN."  
The display shows the Function Guide.  
4
Press the 2 (ON) button to set the Auto  
Opening mode ON.  
To set the Auto Opening mode OFF, press the 1  
(OFF) button. If set to the "OFF" position, the  
monitor should be manually opened or closed by  
pressing the OPEN/CLOSE button.  
1
2
3
Press the SOURCE button.  
The main menu appears on the display.  
Press the 5 (DISPLAY) button.  
The Display mode screen appears.  
5
Press the FUNC (RETURN) button, the display  
returns to the main menu screen.  
Rotate the rotary encoder and select "BRIGHT"  
to activate the Brightness Adjustment mode.  
The display shows the Function Guide.  
NOTE  
Immediately after inputting titles or changing the settings  
of Setup Mode or Display Mode (While the system is  
inputting the titles or data automatically) do not turn the  
ignition key (engine key) to OFF.  
Otherwise, the title may not be written, or the settings  
may not be changed.  
4
Press the 1 (; DARK) to make the picture darker  
or press the 3 (LIGHT :) to make the picture  
brighter.You can adjust the brightness between  
MIN (15) and MAX (+15). When it reaches the  
minimum or maximum point, the display shows  
"MIN" or "MAX" respectively. To quickly set to the  
center position, press the 2 ( 0) button.  
5
When the adjustment has been completed, press  
the FUNC (RETURN) button. The display returns  
to the main menu screen.  
NOTES  
With the Display mode screen displayed, pressing and  
rotating the rotary encoder can adjust the volume level.  
Immediately after inputting titles or changing the  
settings of Setup Mode or Display Mode (While the  
system is inputting the titles or data automatically) do  
not turn the ignition key (engine key) to OFF.  
Otherwise, the title may not be written, or the settings  
may not be changed.  
47-EN  
Other Useful Features  
(CVA-1006)  
(IVA-C801)  
Function buttons  
(1 through 6)  
Function buttons  
(1 through 6)  
1 2 3  
5
1 2 3  
5
FUNC  
FUNC  
SOURCE  
SOURCE  
Rotary encoder  
Rotary encoder  
Adjusting Tint of Picture  
Adjusting Color of Picture  
Tint adjustment can be made only in the  
navigation, DVD, AUX1 and AUX2 modes.  
Tint adjustment cannot be made if a Navigation  
system with the RGB feature is connected.  
Color adjustment can be made only in the  
navigation, DVD, AUX1 and AUX2 modes.  
Color adjustment cannot be made if a Navigation  
system with the RGB feature is connected.  
NOTE  
NOTE  
After carrying out the steps 1 to 3 of "To switch to the  
display mode screen or to the picture mode" explained on  
page 47, perform the operation described below.  
After carrying out the steps 1 to 3 of "To switch to the  
display mode screen or to the picture mode" explained on  
page 47, perform the operation described below.  
1
Rotate the rotary encoder while the DISPLAY  
mode screen is displayed and select "TINT" to  
activate the Tint Adjustment mode. The Function  
Guide is displayed.  
1
Rotate the rotary encoder while the DISPLAY  
mode screen is displayed and select "COLOR" to  
activate the color adjustment mode. The  
Function Guide is displayed.  
2
3
Press the 1 (; GRN) button to adjust green and  
press the 3 (RED :) button to adjust red. To  
quickly set to the center position, press the  
2 ( 0) button.  
2
Press the 1 (; THIN) or 3 (THICK :) button to  
make the color of the picture brighter or darker  
respectively to get your desired color.You can  
adjust the color between MIN (15) and MAX  
(+15). When it reaches the minimum or  
maximum point, the display shows "MIN" or  
"MAX" respectively. To quickly set to the center  
position, press the 2 ( 0) button.  
When the tint adjustment has been completed,  
press the FUNC (RETURN) button. The display  
returns to the main menu screen.  
NOTE  
3
When the adjustment has been completed, press  
the FUNC (RETURN) button. The display returns  
to the main menu screen.  
Immediately after inputting titles or changing the settings  
of Setup Mode or Display Mode (While the system is  
inputting the titles or data automatically) do not turn the  
ignition key (engine key) to OFF.  
Otherwise, the title may not be written, or the settings  
may not be changed.  
NOTE  
Immediately after inputting titles or changing the settings  
of Setup Mode or Display Mode (While the system is  
inputting the titles or data automatically) do not turn the  
ignition key (engine key) to OFF.  
Otherwise, the title may not be written, or the settings  
may not be changed.  
48-EN  
Illumination Control  
Switching Background Textures/  
Colors  
Setting the illumination control to AUTO,  
decreases the illumination brightness of the IVA-  
C801/CVA-1006, whenever the parking lamps of  
the vehicle are ON.  
Use this function if you feel the unit's illumination  
is too bright at night.  
You have a choice of 12 different background  
textures/colors preset at the factory. Select them  
following the procedure below.  
NOTE  
After carrying out the steps 1 to 3 of "To switch to the  
display mode screen or to the picture mode" explained on  
page 47, perform the operation described below.  
NOTE  
After carrying out the steps 1 to 3 of "To switch to the  
display mode screen or to the picture mode" explained on  
page 47, perform the operation described below.  
1
2
Rotate the rotary encoder while the Display  
mode screen is displayed and select "B.GND  
TEXTURE" or "B.GND COLOR." The Function  
Guide appears on the display.  
1
2
3
4
Press the SOURCE button.  
The main menu appears on the display.  
Press the 5 (DISPLAY) button.  
The Display mode screen is displayed.  
Press the Function buttons (1 through 6) that  
has your desired texture.  
The Function buttons have textures/colors as  
follows.  
Rotate the rotary encoder and select "DIMMER."  
The Function Guide is displayed.  
B.GND TEXTURE  
MARBLE  
SKY  
B.GND COLOR  
Press the 3 (AUTO) button to activate the  
Auto Dimmer mode. In the Auto Dimmer mode,  
the background illumination of the monitor is  
synchronized with the instrument illumination  
of the vehicle (the dimmer input lead should be  
connected).  
1
2
3
4
5
6
C1  
C2  
C3  
C4  
C5  
C6  
WOOD  
GRAD.  
METAL  
Press the 1 (OFF) button to deactivate the  
Auto Dimmer mode to keep the background  
illumination of the monitor bright.  
Press the 2 (ON) button to keep the  
background illumination of the monitor dark.  
ABYSS  
The background color changes with respect to  
the selected texture.  
3
When your selection has been made, press the  
FUNC (RETURN) button.  
The display returns to the main menu screen.  
5
When the setting has been completed, press the  
FUNC (RETURN) button.  
The display returns to the main menu screen.  
NOTE  
NOTE  
Immediately after inputting titles or changing the settings  
of Setup Mode or Display Mode (While the system is  
inputting the titles or data automatically) do not turn the  
ignition key (engine key) to OFF.  
Immediately after inputting titles or changing the settings  
of Setup Mode or Display Mode (While the system is  
inputting the titles or data automatically) do not turn the  
ignition key (engine key) to OFF.  
Otherwise, the title may not be written, or the settings  
may not be changed.  
Otherwise, the title may not be written, or the settings  
may not be changed.  
49-EN  
Other Useful Features  
(CVA-1006)  
(IVA-C801)  
1 2 3  
5
1 2 3  
5
SOURCE  
DISP  
SOURCE Rotary encoder  
DISP  
Rotary encoder  
Setting Automatic Background  
Texture/Color Scroll  
Switching Display Modes  
NOTE  
After carrying out the steps 1 to 3 of "To switch to the  
display mode screen or to the picture mode" explained  
on page 47, perform the operation described below.  
Turn on the Automatic Background Texture/color  
Scroll to automatically change background  
texture/colors. The background texture/color will  
change each time the ignition key is turned off  
and turned back on again (12 textures/colors).  
1
Press and hold the DISP button for at least 2  
seconds in the AUX or NAVI mode.  
Each press changes the display modes as  
follows:  
NOTE  
MODE 1 MODE 2 MODE 3 MODE 4  
After carrying out the steps 1 to 3 of "To switch to the  
display mode screen or to the picture mode" explained on  
page 47, perform the operation described below.  
(WIDE)  
(ZOOM) (CINEMA) (NORMAL)  
MODE1  
1
2
Press the SOURCE button.  
The main menu appears on the display.  
Press the 5 (DISPLAY) button to activate the  
Display mode.  
The Display mode screen appears.  
In the Mode 1 (Wide), the monitor displays a  
normal picture wider to fit in the wide-screen  
monitor by evenly stretching out the picture  
horizontally.  
3
4
Rotate the rotary encoder and select "AUTO  
B.GND."  
The Function Guide is displayed.  
MODE2  
Press the 2 (ON) button to turn on the Auto  
Background Texture/color Scroll mode.  
To turn off the Auto Background Texture/color  
Scroll mode, press the 1 (OFF) button.  
The background textures/colors will scroll when  
the ignition key is turned off once and turned  
back on again as follows:  
In the Mode 2 (Zoom), the monitor displays a  
normal picture wider to fit in the wide-screen  
monitor by unevenly stretching out. The center  
portion of the picture is stretched out only slightly  
in order to make the important center portion of  
the picture look natural.  
MARBLE SKY WOOD GRAD. METAL  
C6 C5 C4 C3 C2 C1 ABYSS ←  
NOTE  
Immediately after inputting titles or changing the settings  
of Setup Mode or Display Mode (While the system is  
inputting the titles or data automatically) do not turn the  
ignition key (engine key) to OFF.  
Otherwise, the title may not be written, or the settings  
may not be changed.  
50-EN  
(Example)  
MODE3  
Picture NAV  
NAV  
RADIO  
NAV  
TAPE  
Voice  
NAV  
NAV  
AUX2  
NAV  
NAV  
CHG  
AUX1∗  
NOTE  
In the Mode 3 (Cinema), the monitor displays a  
normal picture by stretching out the picture  
horizontally and vertically. This mode is good for  
displaying a cinema type picture with the  
proportion of 16 to 9.  
Operative only when the video source is DVD,  
Navigation, AUX1 or AUX 2.  
To change only the video portion while listening  
to the current audio source:  
Press the 3 (V.SEL) button to select the video  
portion.  
MODE4  
(Example)  
Picture RADIO  
NAV  
RADIO  
AUX1∗  
RADIO  
Voice  
RADIO  
In the Mode 4 (Normal), the monitor displays  
normal picture at the center of the screen with a  
vertical black belt at each side.  
AUX2  
RADIO  
If a DVD player is connected, you can receive  
the DVD picture/sound.  
DVD player (DVA-5205) or DVD changer (DHA-  
S680) is connected:  
Press and hold the V.OUT button on the remote  
control supplied with the DVD player or DVD  
changer for more than 2 seconds. The picture  
and sound of the DVD will be output.  
Playing 2 Sources Simultaneously  
You can listen to the audio portion of another  
source while watching the picture of current  
source, or you can watch the video portion of  
another source while listening to current source.  
NOTE  
3
Rotate the rotary encoder and select your  
desired audio source or video source, and press  
the rotary encoder to execute the selection.  
After carrying out the steps 1 to 3 of "To switch to the  
display mode screen or to the picture mode" explained  
on page 47, perform the operation described below.  
1
2
Press the SOURCE button.  
The main menu appears on the display.  
To change only the audio portion while watching  
the current video source:  
Press the 2 (A.SEL) button to select the audio  
portion.  
51-EN  
Remote Control Operation  
7 8 Button  
Radio mode: Pressing the button will select, in  
ascending order, stations programed into the  
radio's presets as shown below.  
1
2
1 2 ... 6  
5
6
7
8
9
!
CD Changer mode: DISC Select (UP) Button  
Press the button to select a disc in ascending order.  
Tape Mode: Press this button to advance to the  
beginning of the next selection.  
3
4
8 g Button  
"
#
Radio mode: SEEK (DN) Button  
CD/CD Changer mode: Press the button to go  
back to the beginning of the current track.  
Tape Mode: Press this button to rewind the tape.  
Audio Processor Mode:  
When the main menu is displayed:  
After pressing the A.PROC button, tilt the  
button to select the factory preset curves in the  
selected mode.  
When the adjustment mode screen is displayed:  
Tilt to select the personal preset curves.  
Controls on Remote Control  
1 Power Button  
Press the button to turn the power on/off.  
2 Source Button  
9 f Button  
Press to select the audio source.  
Radio mode: SEEK (UP) Button  
CD/CD Changer mode: Press the button to  
advance to the beginning of the next track.  
Tape Mode: Press to fast forward the tape.  
Audio Processor Mode:  
When the main menu is displayed:  
After pressing the A.PROC button, tilt the  
button to select the factory preset curves in the  
selected mode.  
3 -/J Button  
Press and hold this button for at least 2 seconds to  
play or pause (In CD/MD/TAPE/Changer mode).  
Enter Button  
Press to execute the selection. (The same  
function as the rotary encoder on IVA-C801/  
CVA-1006.)  
Pressing and holding this button for at least 2  
seconds turns the loudness on or off (when  
neither an equalizer nor a digital sound  
processor is connected).  
When the adjustment mode screen is displayed:  
Tilt to select the personal preset curves.  
! 9 Button  
Radio mode: Pressing the button will select, in  
descending order, stations programed into the  
radio's presets as shown below.  
4 ANGLE 89 Buttons  
Press the button to adjust the angle of the  
movable display.  
6 5 ... 1  
5 Band/Program Button  
Radio mode: BAND Button  
Press the button and the band will change as  
shown below.  
CD Changer mode: DISC Select (DN) Button  
Press the button to select a disc in descending  
order.  
Tape Mode: Press this button to return to the  
beginning of the current selection or a selection  
further back.  
FM1 FM2 AM  
Changer mode: BAND Button  
Switches changers (when a Multi-Changer  
Switching device is connected).  
TAPE mode: PROG Button  
Press the button to change between the A and B  
side of the tape.  
" Mute Button  
Press the button to lower the volume by 20 dB  
instantly. Press the button again to cancel.  
Press the button for at least 2 seconds to raise  
the monitor. Press the button again to lower the  
monitor.  
6 Volume Adjustment Buttons  
To increase the volume level:  
# Audio Processor Button∗∗  
Press the button to call the external audio  
processor mode.∗  
Press the L button  
To decrease the volume level:  
Press the K button  
The buttons have the same functions as rotating  
the rotary encoder on IVA-C801/CVA-1006.  
For the operation of external audio processor, refer to the  
Owner's Manual of the external audio processor you  
purchased.  
∗∗ This button is used in conjunction with an optional Ai-  
NET processor.  
52-EN  
(CVA-1006)  
(IVA-C801)  
Remote sensor  
Remote sensor  
2
Replacing the battery  
Put the batteries in the case observing the  
polarities as illustrated.  
Battery Replacement  
Applicable battery: Use two "AAA" sized dry  
batteries or equivalent.  
Point the remote control transmitter toward the remote  
sensor on the IVA-C801/CVA-1006 and use the remote  
control within 2 meters from the IVA-C801/CVA-1006.  
1
Opening the battery cover  
Slide out the battery cover while firmly pressing  
the direction of arrow.  
3
Closing the cover  
Push the cover as illustrated until a click is  
heard.  
53-EN  
Information  
Unclear picture display.  
Fluorescent tube is exhausted.  
In Case of Difficulty  
- Replace the fluorescent tube*.  
If you encounter a problem, please review the  
items in the following checklist. This guide will  
help you isolate the problem if the unit is at fault.  
Otherwise, make sure the rest of your system is  
properly connected or consult your authorized  
Alpine dealer.  
* The fluorescent tube replacement is not free of charge  
even within the warranty period, for the tube is an  
article of consumption.  
Radio  
Unable to receive stations.  
No antenna or open connection in cable.  
- Make sure the antenna is properly connected;  
replace the antenna or cable if necessary.  
Unable to tune stations in the seek mode.  
You are in a weak signal area.  
- Make sure the tuner is in the DX mode.  
If the area you are in is a primary signal area, the  
antenna may not be grounded and connected properly.  
- Check your antenna connections; make sure the  
antenna is properly grounded at its mounting location.  
The antenna may not be the proper length.  
- Make sure the antenna is fully extended; if broken,  
replace the antenna with a new one.  
Basic  
No function or display.  
Vehicle's ignition is off.  
- If connected following instructions, the unit will not  
operate with the vehicle's ignition off.  
Improper power lead connections.  
- Check power lead connections.  
Blown fuse.  
- Check the fuse on the battery lead of the unit; replace  
with the proper value if necessary.  
Internal microcomputer malfunctioned due to  
interference noise etc.  
- Press the Reset button with a ball-point pen or other  
pointed article.  
Broadcast is noisy.  
The antenna is not the proper length.  
- Extend the antenna fully; replace it if it is broken.  
The antenna is poorly grounded.  
- Make sure the antenna is grounded properly at its  
mounting location.  
Weak or no battery power.  
- Check battery.  
No sound or unnatural sound.  
Incorrect setting of volume/balance/fader controls.  
- Readjust the controls.  
Connections are not properly or securely made.  
- Check the connections and firmly connect.  
Screen not displayed.  
The station signal is weak and noisy.  
- If above solution does not work, tune in another station.  
Brightness control is set at the minimum position.  
- Adjust the Brightness control.  
Temperature in the vehicle is too low.  
- Increase the vehicle's interior temperature to operation  
temperature range.  
Connections to the DVD, CD player, navigation system  
are not securely made.  
- Check the connections and firmly connect.  
Movement of displayed picture is abnormal.  
Temperature in the vehicle is too high.  
- Allow the vehicle's interior temperature to cool.  
Unclear or noisy display.  
Fluorescent plate is worn out.  
- Replace the fluorescent plate.  
Navigation system inoperative.  
Connections with the navigation system are improper.  
- Check the connections with the navigation system and  
connect the cables correctly and firmly.  
54-EN  
CD (IVA-C801 only)  
Indication for CD Player (IVA-C801 only)  
HI-TEMP  
CD playback sound is wavering.  
Moisture condensation in the CD Module.  
- Allow enough time for the condensation to evaporate  
(about 1 hour).  
CD insertion not possible.  
A CD is already in the CD player.  
- Eject the CD and remove it.  
Protective circuit is activated due to high temperature.  
- The indicator will disappear when the temperature  
returns to within operation range.  
The CD is being improperly inserted.  
- Make sure the CD is being inserted following  
instructions in the CD Player Operation section.  
Unable to fast forward or backward the CD.  
The CD has been damaged.  
- Eject the CD and discard it; using a damaged CD in  
your unit can cause damage to the mechanism.  
CD playback sound skips due to vibration.  
Improper mounting of the unit.  
- Securely remount the unit.  
NO DISC  
No CD is inserted.  
- Insert a CD.  
Although a disc is inserted, "NO DISC" is displayed  
and the unit does not start to play or eject the disc.  
- Remove the disc by following these steps:  
1) Press the c button.  
The movable display will open.  
2) Press the c button again for at least 3 seconds while  
the movable display is open.  
Disc is very dirty.  
- Clean the disc.  
Disc has scratches.  
- Change the disc.  
ERROR  
CD playback sound skips without vibration.  
Dirty or scratched disc.  
- Clean the disc; damaged disc should be replaced.  
Mechanism error.  
1)Press the c button and eject the CD.  
If not ejecting, consult your Alpine dealer.  
2)When the error indication remains after ejecting,  
press the c button again.  
If the error indication still does not turn off after  
pressing the c button for a few times, consult your  
Alpine dealer.  
NOTE  
When the "ERROR" is displayed:  
In case that the disc cannot be ejected by pressing the c  
button, press the RESET switch (refer to page 8) and  
press the c button again.  
If not ejecting, consult your Alpine dealer.  
55-EN  
Information  
Indications for CD Changer (Optional)  
HI-TEMP  
Temperature in the vehicle is too high.  
- Allow the vehicle's interior temperature to cool.  
The indicator will disappear when the temperature  
returns to within operation range.  
NO MAGAZINE  
No CD magazine is loaded into the CD Changer.  
- Insert a magazine.  
ERROR-01  
Malfunction in the CD Changer.  
- Consult your Alpine dealer.  
Press the magazine eject button and pull out the  
magazine. Check the indication and insert the  
magazine again. If the magazine cannot be pulled out,  
consult your Alpine dealer.  
Magazine ejection not possible.  
- Press the magazine eject button.  
If the magazine does not eject, see the Owner's  
Manual for the CD Changer.  
ERROR-02  
A disc is left inside the CD Changer.  
- Press the EJECT button to activate the eject function.  
When the CD Changer finishes the eject function,  
insert an empty CD magazine into the CD Changer to  
receive the disc left inside the CD Changer.  
56-EN  
Specifications  
Width  
Height  
Depth  
178 mm (7")  
50 mm (2")  
156 mm (6-1/8")  
MONITOR SECTION  
Screen Size  
LCD Type  
6.5"  
Transparent type TN LCD  
TFT active matrix  
Operation System  
CHASSIS SIZE (Tuner section)  
Number of Picture Elements 336,960 pcs. (1,440 × 234)  
Effective Number of Picture Elements  
99.99% or more  
Width  
Height  
Depth  
259 mm (10-13/64")  
37 mm (1-7/16")  
177.5 mm (6-15/16")  
Illumination System  
U-shaped cold cathode  
fluorescent tube  
FM TUNER SECTION  
Tuning Range  
Mono Usable Sensitivity  
50 dB Quieting Sensitivity  
NOTES  
87.7 107.9 MHz  
9.3 dBf (0.8 µV/75 ohms)  
13.5 dBf (1.3 µV/75 ohms)  
Due to continuous product improvement, specifications  
and design are subject to change without notice.  
The LCD panel is manufactured using an extremely high  
precision manufacturing technology. Its effective pixel  
ratio is over 99.99%. This means that there is a possibility  
that 0.01% of the pixels could be either always ON or  
OFF.  
Alternate Channel Selectivity 80 dB  
Signal-to-Noise Ratio  
Stereo Separation  
Capture Ratio  
80 dB  
35 dB  
2.0 dB  
AM TUNER SECTION  
Tuning Range  
530 1,710 kHz  
Usable Sensitivity  
22.5 µV/27.0 dB  
CD PLAYER SECTION (IVA-C801 only)  
Frequency Response  
5 20,000 Hz ( 1 dB)  
Wow & Flutter (% WRMS) Below measurable limits  
Total Harmonic Distortion  
Dynamic Range  
Signal-to-Noise Ratio  
Channel Separation  
0.008% (at 1 kHz)  
95 dB (at 1 kHz)  
95 dB  
85 dB (at 1 kHz)  
REMOTE CONTROL  
Battery Type  
Width  
Height  
Depth  
AAA batteries (2 pcs.)  
42 mm (1-21/32")  
121 mm (4-25/32")  
23 mm (29/32")  
Weight  
50 g (1.8 oz)  
GENERAL  
Power Requirement  
14.4 V DC  
(1115 V allowable)  
+32°F to +113°F  
(0°C to + 45°C)  
45 W × 4  
Operating temperature  
Maximum Power Output  
Output Voltage  
1,000 mV/10k ohms  
Maximum Pre-Output Voltage 4 V/10k ohms  
Bass  
Treble  
15 dB at 30 Hz  
15 dB at 10 kHz  
1.7 kg (3 lbs. 12 oz)  
1.6 kg (3 lbs. 8 oz)  
Weight (Monitor Section)  
(Tuner Section)  
CHASSIS SIZE (Monitor section)  
57-EN  
Installation and Connections  
Before installing or connecting the unit, please  
Caution  
read the following and pages 3 to 6 of this  
manual thoroughly for proper use.  
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.  
The wiring and installation of this unit requires special technical  
skill and experience. To ensure safety, always contact the dealer  
where you purchased this product to have the work done.  
Warning  
USE SPECIFIED ACCESSORY PARTS AND INSTALL  
MAKE THE CORRECT CONNECTIONS.  
Failure to make the proper connections may result in fire  
or product damage.  
THEM SECURELY.  
Be sure to use only the specified accessory parts. Use of  
other than designated parts may damage this unit internally  
or may not securely install the unit in place. This may cause  
parts to become loose resulting in hazards or product failure.  
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE  
GROUND.  
(Check with your dealer if you are not sure.) Failure to do  
so may result in fire, etc.  
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR  
PINCHED BY A SHARP METAL EDGE.  
Route the cables and wiring away from moving parts (like  
the seat rails) or sharp or pointed edges. This will prevent  
crimping and damage to the wiring. If wiring passes through  
a hole in metal, use a rubber grommet to prevent the wires  
insulation from being cut by the metal edge of the hole.  
BEFORE WIRING, DISCONNECT THE CABLE FROM  
THE NEGATIVE BATTERY TERMINAL.  
Failure to do so may result in electric shock or injury due  
to electrical shorts.  
DO NOT INSTALL IN LOCATIONS WITH HIGH  
DO NOT ALLOW CABLES TO BECOME ENTANGLED  
IN SURROUNDING OBJECTS.  
Arrange wiring and cables in compliance with the manual  
to prevent obstructions when driving. Cables or wiring  
that obstruct or hang up on places such as the steering  
wheel, gear lever, brake pedals, etc. can be extremely  
hazardous.  
MOISTURE OR DUST.  
Avoid installing the unit in locations with high incidence  
of moisture or dust. Moisture or dust that penetrates into  
this unit may result in product failure.  
Precautions  
Be sure to disconnect the cable from the () battery post  
before installing your IVA-C801/CVA-1006. This will  
reduce any chance of damage to the unit in case of a  
short-circuit.  
Be sure to connect the color coded leads according to the  
diagram. Incorrect connections may cause the unit to  
malfunction or damage to the vehicle's electrical system.  
DO NOT SPLICE INTO ELECTRICAL CABLES.  
Never cut away cable insulation to supply power to other  
equipment. Doing so will exceed the current carrying  
capacity of the wire and result in fire or electric shock.  
DO NOT DAMAGE PIPE OR WIRING WHEN  
DRILLING HOLES.  
When drilling holes in the chassis for installation, take  
precautions so as not to contact, damage or obstruct pipes,  
fuel lines, tanks or electrical wiring. Failure to take such  
precautions may result in fire.  
When making connections to the vehicle's electrical  
system, be aware of the factory installed components  
(e.g. on-board computer). Do not tap into these leads to  
provide power for this unit. When connecting the IVA-  
C801/CVA-1006 to the fuse box, make sure the fuse for  
the intended circuit of the IVA-C801/CVA-1006 has the  
appropriate amperage. Failure to do so may result in  
damage to the unit and/or the vehicle. When in doubt,  
consult your ALPINE dealer.  
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR  
STEERING SYSTEMS TO MAKE GROUND  
CONNECTIONS.  
Bolts or nuts used for the brake or steering systems (or  
any other safety-related system), or tanks should NEVER  
be used for installations or ground connections. Using  
such parts could disable control of the vehicle and cause  
fire etc.  
The IVA-C801/CVA-1006 uses female RCA-type jacks  
for connection to other units (e.g. amplifier) having RCA  
connectors. You may need an adaptor to connect other  
units. If so, please contact your authorized ALPINE dealer  
for assistance.  
Be sure to connect the speaker () leads to the speaker  
() terminal. Never connect left and right channel  
speaker cables to each other or to the vehicle body.  
The Display must be completely retracted in the casing  
when installing. If it is not, problems may occur.  
KEEP SMALL OBJECTS SUCH AS BOLTS OR  
SCREWS OUT OF THE REACH OF CHILDREN.  
Swallowing them may result in serious injury. If  
swallowed, consult a physician immediately.  
When installing in automobiles, make sure the Display can  
open/close without coming in contact with the gear shift .  
IMPORTANT  
DO NOT INSTALL IN LOCATIONS WHICH MIGHT  
HINDER VEHICLE OPERATION, SUCH AS THE  
STEERING WHEEL OR GEARSHIFT.  
Doing so may obstruct forward vision or hamper  
movement etc. and results in serious accident.  
Please record the serial number of your unit in the  
space provided below and keep it as a permanent  
record. The serial number plate is located on the  
bottom of the unit.  
SERIAL NUMBER:  
INSTALLATION DATE:  
INSTALLATION TECHNICIAN:  
PLACE OF PURCHASE:  
58-EN  
Installation  
Reinforce the monitor unit with the metal  
mounting strap (not supplied). Secure the ground  
lead of the unit to a clean metal spot using a  
screw () already attached to the vehicle's  
chassis.  
Installing the Monitor  
Place of installation  
Before determining the position of installation,  
check that the display will not hamper gear  
shifting when it is opened and closed in that  
position.  
NOTE  
For the screw marked ≤≤, use an appropriate screw  
for the chosen mounting location.  
Connect each input lead coming from an amplifier  
or equalizer to the corresponding output lead  
coming from the left rear of the IVA-C801/CVA-  
1006. Connect all other leads of the IVA-C801/  
CVA-1006 according to details described in the  
Connections section.  
NOTE  
Install at an angle of within 30 degrees from the  
horizontal.  
Mounting  
Bracket  
(Included)  
1
Dashboard  
3
Mounting Sleeve  
(Included)  
IVA-C801/  
CVA-1006  
Lock Pin  
Screws (M5x6)  
(Included)  
Washers  
Slide the IVA-C801/CVA-1006 into the  
dashboard. When the unit is in place, make sure  
the locking pins are fully seated in the down  
position. This can be done by pressing firmly in  
on the unit while pushing the locking pin down  
with a small screwdriver. This ensures that the  
unit is properly locked and will not accidentally  
come out from the dashboard. Install the  
supplied Front Frame.  
(Included)  
Slide mounting sleeve from main unit (see  
Removal Procedure below). Slide the mounting  
sleeve into the dashboard. Install the supplied  
bracket to the monitor.  
2
Screw  
Removal  
Hex Nut  
1. Use a small screwdriver (or similar tool) to push  
the locking pins to the "up" position (see Step 3).  
As each pin is unlocked, gently pull out on the  
unit to make sure it does not re-lock before  
unlocking the second pin.  
(M5)  
Bolt Stud  
IVA-C801/  
CVA-1006  
Metal  
Mounting  
Strap  
2. Pull the unit out, keeping it unlocked as you do  
so.  
Ground  
Lead  
Front  
Frame  
(Included)  
Chassis  
59-EN  
Installation and Connections  
When mounting with Screws  
<JAPANESE CAR>  
When mounting the tuner with the screws, be sure to  
choose a flat location.  
To install using the vehicle's genuine bracket.  
When making holes, be careful not to scratch any  
pipes or wires.  
Screws  
(M5x6)  
(Included)  
1
Connect the bracket to both the flanks of the  
tuner with the supplied pan screws (M4x8).  
Ground Lead  
IVA-C801/  
CVA-1006  
Tuner  
Mounting  
Bracket  
Bracket  
(Included)  
Installing the Tuner  
Pan screws (M4x8) (Included)  
When mounting with Velcro fasteners  
When mounting the tuner with the Velcro fasteners,  
be sure to choose a flat location.  
Do not hang the unit from the bottom of the  
dashboard or rear deck with the Velcro fasteners.  
2
Install the tuner on the floor with the supplied  
hexagon flange-head screws (M5x15).  
Hexagon flange-head screws  
(M5x15) (Included)  
1
Placing the Velcro fasteners onto the Tuner.  
Peel off the protective paper from the adhesive  
side of the Velcro fasteners.  
Attach two pieces of the Velcro fasteners (rough  
textured) onto the bottom of the Tuner.  
Tuner  
Tuner  
Velcro Fastener  
2
Attach two pieces of the Velcro fasteners (soft  
textured) onto the mounting location such as  
under the front passenger's seat etc. Mount the  
Tuner aligning the Velcro Fasteners.  
60-EN  
Parking Brake Lead Connection  
If necessary, use a pinch connector to connect the foot brake lead, parking brake lead, etc.  
1
2
Vehicle Cable  
Pinch Connector  
Pliers  
Monitor Cable  
Stopper  
Foot Brake Lead/Parking Brake Lead Connection  
Foot brake lamp  
FOOT BRAKE  
Foot brake switch  
IVA-C801/  
CVA-1006  
TUNER  
(Yellow/Black)  
Foot brake lead  
Pinch  
Connector  
Chassis  
PARKING BRAKE  
Battery  
Parking brake lamp  
Parking brake lead  
(Yellow/Blue)  
Pinch  
Connector  
Parking brake switch  
SPST SW (Optional)  
Connection Diagram of SPST Switch (Sold Separately)  
(If the ACC power supply is not available)  
IGNITION  
(Red)  
BATTERY  
IVA-C801/  
(Yellow)  
CVA-1006  
(Monitor and  
Tuner)  
Battery  
NOTE  
If your vehicle has no ACC power supply, add an SPST (Single-Pole, Single-Throw) switch (sold separately).  
If the switched power (ignition) lead of the IVA-C801/CVA-1006 is connected directly to the positive (+) post of the  
vehicles battery, the IVA-C801/CVA-1006 draws some current (several hundred milliamperes) even when its switch is  
placed in the OFF position and the battery may be discharged.  
Cautions for handling the I/F cord  
The I/F cord is used to connect the monitor and the tuner BOX.  
Press the LOCK button gently while removing the I/F cord out of the terminal. (See the illustration below.)  
If you pull out the lock by force, the lock pins will be forced. This will cause a bad connection.  
Some possible problems:  
The power of the unit turns off frequently.  
The display disappears.  
The monitor doesn't open or close.  
LOCK button  
Pull out the cord before you unlock the pins.  
61-EN  
Installation and Connections  
Connections (IVA-C801/CVA-1006 Wiring Diagram)  
ILLUMINATION  
1
To the instrument cluster  
illumination lead  
(Orange)  
3
IVA-C801/  
CVA-1006  
<Monitor>  
BATTERY  
2
4
5
(Yellow)  
GND  
6
Battery  
(Black)  
Antenna  
7
REMOTE OUT  
AUX1  
8
8
<Tuner>  
To remote input lead.  
To remote input lead.  
(White/Brown)  
FM ANTENNA  
REMOTE OUT  
AUX2  
R
AUDIO  
L(MONO)  
AUX INPUT  
(White/Brown)  
VIDEO  
NAVIGATION INPUT  
9
FOOT BRAKE  
R
AUDIO  
To the foot brake cord or brake  
lamp cord.  
L(MONO)  
AUX OUTPUT  
(Yellow/Black)  
VIDEO  
5
DISPLA OUTPUT  
Y
REMOTE OUT  
REMOTE  
0
!
@
#
TURN-ON  
Ai-NET  
°
POWER SUPPLY  
To amplifier or equalizer  
To power antenna  
FRONT  
REAR  
(Blue/White)  
AUDIO  
SUB W.  
POWER ANT  
(Blue)  
AUDIO  
INTERRUPT IN  
NORM  
To vehicle phone  
(Pink/Black)  
EQ/DIV  
PARKING BRAKE  
To the parking brake signal lead  
(Yellow/Blue)  
IGNITION  
$
2
4
(Red)  
Ignition key  
%
BATTERY  
(Yellow)  
GND  
Battery  
(Black)  
SPEAKER  
LEFT  
SPEAKER  
LEFT  
SPEAKER  
RIGHT  
SPEAKER  
RIGHT  
FRONT  
REAR  
REAR  
FRONT  
(White/  
Black)  
(Green)  
(Violet/  
Black)  
(Gray)  
(White)  
(Green/  
Black)  
(Violet)  
(Gray/  
Black)  
¤
)
(
*
&
^
Speakers  
Front left  
Rear left  
Rear right  
Front right  
62-EN  
1 Illumination Lead (Orange)  
Remote Output Terminal  
Antenna Receptacle  
I/F (Interface) Lead  
° Display Output Terminal  
Connect a monitor to this terminal using the I/F lead  
(included).  
This lead may be connected to the vehicle's instrument  
cluster illumination lead. This will allow the backlight-  
ing of the IVA-C801/CVA-1006 to dim whenever the  
vehicles lights are turned on.  
2 Battery Lead (Yellow)  
Connectthisleadtothepositive(+)postofthevehicle's  
battery.  
3 Fuse Holder (7.5A)  
4 Ground Lead (Black)  
Connect this lead to a good chassis ground on the ve-  
hicle. Make sure the connection is made to bare metal  
and is securely fastened using the sheet metal screw  
provided.  
5 Power Supply Connector  
6 Remote Control Interface Connector  
Connect to the remote control interface box.  
7 Antenna Extension Cable  
8 Remote Control Output Lead (White/Brown)  
Connect this lead to the remote control input lead. This  
lead outputs the controlling signals from the remote  
control.  
9 Foot Brake Lead  
Connect to the vehicle's foot brake lead or brake lamp  
lead.  
0 Remote Turn-On Lead (Blue/White)  
Connect this lead to the remote turn-on lead of your  
amplifier or signal processor.  
! Power Antenna Lead (Blue)  
Connect this lead to the +B terminal of your power  
antenna, if applicable.  
@ Audio Interrupt In Lead (Pink/Black)  
# Parking Brake Lead (Yellow/Blue)  
Connect this lead to the power supply side of the park-  
ing brake switch to transmit the parking brake status  
signals to the IVA-C801/CVA-1006.  
$ Switched Power Lead (Ignition) (Red)  
Connect this lead to an open terminal on the vehicle's  
fuse box or another unused power source which pro-  
vides (+) 12V only when the ignition is turned on or in  
the accessory position.  
% Fuse Holder (15A)  
^ Right Front (+) Speaker Output Lead (Gray)  
& Right Front () Speaker Output Lead (Gray/Black)  
* RightRear()SpeakerOutputLead(Violet/Black)  
( Right Rear (+) Speaker Output Lead (Violet)  
) Left Rear (+) Speaker Output Lead (Green)  
Left Rear () Speaker Output Lead (Green/Black)  
¤ Left Front () Speaker Output Lead (White/Black)  
Left Front (+) Speaker Output Lead (White)  
System Switch  
WhenconnectinganequalizerordividerusingAi-NET  
feature,placethisswitchintheEQ/DIVposition.When  
no device is connected, leave the switch in the NORM  
position.  
NOTE  
Be sure turn the power off to the unit before changing the  
switch position.  
63-EN  
Installation and Connections  
System Example  
@
(White/Brown)  
(White/Brown)  
REMOTE IN  
REMOTE OUT  
AUX1  
43  
<Tuner>  
(NVE-N852A/NVE-N871A)  
!
Navigation system  
FM ANTENNA  
(Sold Separately)  
R
AUDIO  
L(MONO)  
AUX INPUT  
(Yellow)  
5
#
$
%
VIDEO  
DVD Video  
NAVIGATION INPUT  
Player  
R
AUDIO  
6
(Sold Separately)  
L(MONO)  
AUX OUTPUT  
7
VIDEO  
1
DISPLAY OUTPUT  
REMOTE OUT  
8
Ai-NET  
POWER SUPPLY  
FRONT  
REAR  
(Red: R-ch)  
&
AUDIO  
^
^
Equalizer equipped with Ai-NET  
SUB W.  
(Sold Separately)  
(White: L-ch)  
(Red: R-ch)  
9
0
8
8
2
NORM  
(White: L-ch)  
*
EQ/DIV  
(
When connecting with NVA-N751AS of the Alpine's Navigation System  
¤
(NVA-N751AS)  
To6  
Navigation Unit  
(Yellow/  
Red)  
(Sold Separately)  
CD Changer (Ai-NET)  
(Sold Separately)  
(Yellow/Red)  
DISPLAY  
(White/  
Green)  
CONTROL OUT  
(White/Green)  
(White/Brown)  
GUIDE  
CONTROL OUT  
(White/  
Brown)  
REMOTE IN  
When connecting the DVD changer  
@
(White/Brown)  
(White/Brown)  
REMOTE IN  
<Tuner>  
REMOTE OUT  
AUX1  
FM ANTENNA  
To VIDEO  
OUTPUT terminal  
(Yellow)  
R
AUDIO  
L(MONO)  
AUX INPUT  
DVD Changer  
5
8
)
VIDEO  
(Sold Separately)  
NAVIGATION INPUT  
8
8
R
AUDIO  
L(MONO)  
AUX OUTPUT  
VIDEO  
1
DISPLAY OUTPUT  
REMOTE OUT  
Ai-NET  
POWER SUPPLY  
FRONT  
REAR  
AUDIO  
(
SUB W.  
CD Changer (Ai-NET)  
(Sold Separately)  
2
NORM  
EQ/DIV  
64-EN  
1 Remote Output Terminal  
2 System Switch  
When connecting an equalizer or divider using Ai-NET  
feature, placethisswitchintheEQ/DIVposition. When  
no device is connected, leave the switch in the NORM  
position.  
NOTE  
Be sure to turn the power off to the unit before changing  
the switch position.  
3 AUX Audio Input (AUX1) Terminals  
4 AUX Audio/Video Input (AUX2) Terminals  
5 AUX Video Input (AUX1) Terminal  
Connect the video output lead of a DVD video player or  
DVD changer to this terminal.  
6 RGB Input Terminal  
Connect this to the RGB output terminal of the Naviga-  
tion System.  
7 AUX Output Terminal  
Use when connecting an optional monitor etc.  
8 Ai-NET Connector  
Connect this to the output or input connector of other  
product equipped with Ai-NET.  
9 Rear/Front Input Terminal  
Use when connecting an amplifier/equalizer.  
0 Subwoofer Input Terminal  
Connect the output lead of an amplifier for the  
subwoofer to this terminal.  
! RGBCable(IncludedwithNVE-N852,notincluded  
with NVE-N871A)  
@ Remote Control Output Lead (White/Brown)  
Connect this lead to the remote control input lead. This  
lead outputs the controlling signals from the remote  
control.  
# RCA Extension Cable (Included with DVD video  
player)  
$ Ai-NET Cable (Included with DVD video player)  
% Ai-NET Cable (Included with Equalizer)  
^ RCA Extension Cable (Sold separately)  
& Front Output RCA Connectors  
* Rear Output RCA Connectors  
( Ai-NET Cable (Included with CD Changer)  
) RCAExtensionCable(IncludedwithDVDChanger)  
Ai-NET Cable (Included with DVD Changer)  
¤ RGB Convertor Cable (KWE-503N) (Sold Sepa-  
rately)  
65-EN  

Canon Digital Camera 2807B005 User Manual
Canon HF R28 User Manual
Canon MV830i User Manual
Canon UC 6000 User Manual
Dodge 118127X User Manual
Dynex DX G1113 User Manual
Fellowes SB 89CI User Manual
HP (Hewlett Packard) Hewlett Packard Car Video System LA2405X User Manual
Huey Chiao HCB20 User Manual
JVC Car Stereo System KD R618 User Manual