Alpine DVA 5205P User Manual

R
DVA-5205P  
DVD/VIDEO CD/  
CD PLAYER  
• OWNERS MANUAL (Page 2-71)  
Please read this manual to maximize your  
enjoyment of the outstanding performance and  
feature capabilities of the equipment, then retain  
the manual for future reference.  
• MODE DEMPLOI (Page 72-141)  
Veuillez lire ce mode demploi pour tirer  
pleinement profit des excellentes performances et  
fonctions de cet appareil, et conservez-le pour  
toute référence future.  
• MANUAL DE OPERACION (Página 142-211)  
Lea este manual, por favor, para disfrutar al  
máximo de las excepcionales prestaciones y  
posibilidades funcionales que ofrece el equipo,  
luego guarde el manual para usarlo como  
referencia en el futuro.  
DIGITAL VIDEO  
Precautions  
This symbol means important instructions.  
Failure to heed them can result in injury or property damage.  
Caution  
DO NOT MIX NEW BATTERIES WITH OLD BATTERIES. INSERT WITH THE  
CORRECT BATTERY POLARITY. When inserting the batteries, be sure to  
observe proper polarity (+ and –) as instructed. Rupture or chemical leakage  
from the battery may cause fire or personal injury.  
HALT USE IMMEDIATELY IF A PROBLEM APPEARS. Failure to do so may  
cause personal injury or damage to the product. Return it to your authorized  
Alpine dealer or the nearest Alpine Service Center for repairing.  
3
Precautions  
Temperature  
Be sure the temperature inside the vehicle is between +60°C (+140°F) and –10°C  
(+14°F) before turning your unit on.  
Moisture Condensation  
You may notice the CD playback sound wavering due to condensation. If this happens,  
remove the disc from the player and wait about an hour for the moisture to evaporate.  
Damaged Disc  
Do not attempt to play cracked, warped, or damaged discs. Playing a bad disc could  
severely damage the playback mechanism.  
Maintenance  
If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine  
dealer or the nearest Alpine Service Station for servicing.  
Never Attempt the Following  
Do not grip or pull out the disc while it is being pulled back into the player by the  
automatic reloading mechanism.  
Do not attempt to insert a disc into the unit when the unit power is off.  
Inserting Discs  
Your player accepts only one disc at a time for playback. Do not attempt to load more  
than one disc.  
Make sure the label side is facing up when you insert the disc.Your player will auto-  
matically eject any disc that is inserted incorrectly.  
Playing a disc while driving on a very bumpy road may result in skips, but this will not  
scratch the disc or damage the player.  
Irregular Shaped Discs  
Make sure the discs you use in this unit do not have any irregularities. The outer and  
inner edges should be round and smooth. Use of irregularly shaped discs may cause  
damage to the mechanism.  
New Discs  
As a protective measure to prevent the CD from jamming, the CD player will automati-  
cally eject discs with irregular surfaces or inserted incorrectly. When a new disc is  
inserted into the player and ejected after initial loading, using your finger, feel around  
the inside of the centre hole and outside edge of the disc. If you feel any small bumps  
or irregularities, this could inhibit proper loading of the disc. To remove the bumps, rub  
the inside edge of the hole and outside edge of the disc with a ball-point pen or other  
such instrument, then insert the disc again.  
Installation Location  
Make sure the DVA-5205P will not be installed in a location subjected to:  
Direct sun and heat  
High humidity and water  
Excessive dust  
Excessive vibrations  
4
CONTENTS  
Custom setting –  
Precautions  
Changing the Closed Caption setting .................... 35  
Custom setting – Changing the Ai-NET settings.... 36  
Custom setting –  
Warnings and Cautions ............................... 2  
Contents ...................................................... 5  
Changing the H.U. Control settings ........................ 38  
Quick Guide  
Digital Audio Processor (Optional)  
About DVDs ................................................. 6  
Discs playable on this DVD player ............... 7  
When using remote control ......................... 8  
Loading and unloading discs ....................... 9  
Turning the power on and off ..................... 10  
Switching between NTSC and  
PAL configuration....................................... 11  
Adjusting the volume ................................. 11  
Playing discs.............................................. 12  
Stopping playback ..................................... 13  
Fast-forwarding/fast-reversing ................... 14  
Finding the beginnings of chapters or tracks .... 14  
Playing still frames (pausing) ..................... 15  
Frame-by-frame playback .......................... 15  
Slow motion playback ................................ 15  
Operating the digital audio processor (optional) .... 40  
Adjusting the parametric equalizer ............ 41  
Adjusting the surround settings ................. 42  
Storing the surround settings .................... 43  
Recalling the surround settings ................. 44  
Adjusting the time compensation .............. 45  
Using the Pro Logic mode ......................... 45  
ADJUST – Setting the speaker mode........ 46  
ADJUST – Adjusting the acoustic image ... 47  
ADJUST – Mixing the rear audio channels ....... 48  
ADJUST – Center speaker time compensation ..... 49  
ADJUST – Rear speaker time compensation ... 50  
ADJUST – Achieving powerful sound at low volumes .. 51  
ADJUST – Adjusting the speaker level ...... 52  
MODE – Adjusting the volume, fader and balance ..... 53  
MODE – Adjusting the subwoofer ............. 54  
MODE – Turning the defeat function on and off ..... 55  
Convenient Functions  
Searching by title number .......................... 16  
Searching directly by chapter or track number .. 17  
Searching by elapsed time ........................ 18  
Chapter/track/title repeat playback ............ 19  
Switching the audio language ................... 19  
Switching the angle ................................... 20  
Switching the subtitles (subtitle language) ...... 20  
Displaying the subtitles .............................. 21  
Displaying the disc status .......................... 21  
Video output ON/OFF ................................ 23  
Operating from the Head Unit  
(CDA-7865R)  
Operating from the head unit ..................... 56  
Operating from the head unit’s remote control unit ..... 58  
Others  
Terminology ............................................... 60  
List of language codes .............................. 61  
List of country codes ................................. 63  
In case of difficulty ..................................... 66  
Specifications ............................................ 67  
Functions of remote control unit buttons ... 68  
SET UP  
Changing the Default Settings  
Changing the default settings (setup) ........ 24  
Changing the language settings ................ 24  
Changing the TV screen settings .............. 26  
Changing the country code setting ............ 27  
Setting the rating level (parental lock) ....... 28  
Changing the downsampling setting.......... 30  
Changing the digital output setting ............ 32  
Changing the LED indicator setting ........... 34  
5
About DVDs  
About DVDs  
Music CDs and DVDs have grooves (tracks) in  
which the digital data is recorded. The data is  
represented as microscopic pits recorded into  
the track – these pits are read by a laser beam  
to play the disc. On DVDs, the density of the  
tracks and pits is twice that of CDs, so DVDs  
can contain more data in less space.  
Moreover, DVDs offer a variety of functions.  
• Multiple audio* (page 19)  
Movies can be recorded in up to eight  
languages. The desired language can be  
selected from the remote control unit.  
• Subtitles function* (page 20)  
Movies can include subtitles in up to 32  
languages. The desired subtitle language  
can be selected from the remote control unit.  
CD-ROMs  
• Multi angle function* (page 20)  
When the DVD contains a movie shot from  
multiple angles, the desired angle can be  
selected from the remote control unit.  
Minimum bit  
length -  
0.9 µm  
Track pitch -  
1.6 µm  
• Multi story function*  
1.2 mm  
With this function, a single movie includes  
various story lines. You can select different  
story lines to view various versions of the  
same movie.  
Operation differs from disc to disc. Story line  
selection screens including instructions  
appear during the movie. Just follow the  
instructions.  
DVDs  
Minimum bit  
length -  
0.9 µm  
Track pitch -  
0.74 µm  
0.6 mm  
0.6 mm  
Note: * The functions audio languages, subtitle  
languages, angles, etc., differ from disc to  
disc. For details, refer to the disc’s  
instructions.  
A 12 cm disc can contain one movie or about  
four hours of music.  
In addition, DVDs provide sharp picture quality  
with vivid colors thanks to a horizontal resolu-  
tion of over 500 lines (compared to less than  
300 for VHS tape). With the addition of an  
optional, digital audio processor (PXA-H510),  
you can recreate the power and presence of a  
movie theater with Dolby Digital 5.1-channel  
Surround.  
6
Discs playable on this DVD player  
Discs playable on this DVD player  
• Playable discs  
The discs listed below can be played on this  
DVD player. Other discs cannot be played.  
• DVD region number (playable region  
number)  
This DVD player will playback any disc whose  
region number is 2 (or All). DVDs on which  
you do not find a region number “2” or mark  
“ALLlisted below, cannot be played on this  
DVD player.  
2
ALL  
• Video CDs  
This DVD player is compatible with playback  
control (PBC) compatible video CDs (version  
2.0).  
“PBC” is a function by which you can use  
menu screens recorded on the disc to find  
the scene you want to watch and view  
various types of information in dialog style.  
• Disc terminology  
Title  
If titles are programmed for the DVD, these  
are the largest unit of division of the informa-  
tion recorded on the disc.  
Chapter  
Each Title may also be divided into smaller  
divisions called Chapters. These can be  
specific scenes or musical selections.  
* This product incorporates copyright  
protection technology that is protected  
by method claims of certain U.S. patents  
and other intellectual property rights  
owned by Macrovision Corporation and  
other rights owners. Use of this copy-  
right protection technology must be  
authorized by Macrovision Corporation,  
and is intended for home and other  
limited viewing uses only unless other-  
wise authorized by Macrovision Corpo-  
ration. Reverse engineering or disas-  
sembly is prohibited.  
DIGITAL VIDEO  
VIDEO CD  
*
* Manufactured under license from  
Dolby Laboratories. “Dolby”, “Pro  
Logic” and the double-D symbol are  
trademarks of Dolby Laboratories.  
* “DTS” and “DTS Digital Out” are  
trademarks of Digital Theater Sys-  
tems, inc.  
• Discs that cannot not be played  
DVD-ROMs, DVD-R/DVD-RAMs, CD-ROMs,  
CD-R/CD-RWs, photo CDs, etc.  
7
When using remote control  
When using remote control  
Replacing the batteries  
• Mode Switch  
Opening the battery cover  
Push on the cover and slide it as  
indicated by the arrows then the cover will  
be removed.  
To operate the DVD Player, make sure  
the mode switch is on “DVD”. DVD  
operations are shown as the blue  
characters on the remote control unit.  
DVD / AUDIO  
Replacing the battery  
Remove the old batteries. Insert new  
ones matching the (+) and (–) polarities  
as shown in the diagram inside the  
remote control.  
Switching to “AUDIO” mode, makes it  
possible to operate Alpine audio  
products as well. Audio operations are  
shown as the white characters on the  
remote control unit.  
• Point the remote control at the remote  
sensor within about 2 meter.  
• It may not be possible to operate the  
remote control unit if the remote control  
sensor is exposed to direct sunlight.  
• The remote control is a small, light  
weight precision device. To avoid  
damage, short battery life, operational  
errors and poor button response,  
observe the following.  
Closing the cover  
Push the cover in the arrow direction until  
a click is heard.  
- Do not apply any shock.  
- Do not put in a trouser pocket.  
- Keep away from food, moisture and  
dirt.  
- Do not place in direct sunshine.  
Note: Use two AA size batteries.  
Warning  
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY  
FROM SAFELY DRIVING YOUR VEHICLE. Any function that requires your  
prolonged attention should only be performed after coming to a complete stop.  
Always stop the vehicle in a safe location before performing these functions.  
Failure to do so may result in an accident.  
8
Loading and unloading discs  
DVD  
Video CD  
Loading and unloading discs  
Turn on the power before loading and unloading discs.  
(Refer to page 10 “Turning the power on and off”.)  
CD  
Loading discs  
Close the door.  
Be sure to close the door to prevent dust  
from getting inside.  
Press the door in gently then  
slide it downwards.  
Insert the disc with the side  
containing words or diagrams  
facing upwards.  
Once the disc is partially inserted, it is  
drawn in automatically. Playback starts.  
Unloading discs  
Press the door in gently then  
slide it downwards. The disc is  
automatically ejected part way.  
If the disc is not removed, it is automati-  
cally drawn back into the player after a  
while.  
Notes:  
• If the ignition key is on ACC or ON, a disc can be  
inserted even when the power is OFF. The power  
then goes ON automatically.  
• For two-sided DVDs, play one side of the disc to  
the end, then unload the disc, turn it over and  
reload it to play the other side.  
Refer to the indications on the disc (“Side 1”/”Side  
2”).  
• Never insert map discs for navigation purposes  
as they could damage the equipment.  
• If wrong disc, upside-down discs or dirty discs  
have been inserted, “DISC ERROR” is displayed.  
Open the door and remove the disc.  
Notes:  
• If the ignition key is on ACC or ON, a disc can be  
removed even when the power is OFF. After  
removing the disc, the power goes OFF again  
automatically.  
• Even if you open the door, the disc will not be  
ejected in the ACC OFF mode or in the disc  
loading mode (“LOADING” is displayed).  
Never close the door while the disc  
Caution  
is being unloaded. Doing so could  
scratch the disc or damage the  
player.  
9
Turning the power on and off  
Turning the power on  
and off  
Press “POWER”.  
The power turns on.  
When connected with an Alpine  
head unit  
Caution  
If the DVA-5205P is connected to  
anything other than the CVA-1005R/IVA-  
M700R/IVA-C800R (for ex.: CVA-1000R),  
the default DVD setting must be  
changed. See page 36, “Custom setting  
– Changing the Ai-NET settings” to  
change the SETUP to CD mode and see  
page 38, “Custom setting – Changing  
the H.U. CONTROL settings” to change  
the SETUP to ON mode before using it.  
To turn the power off, press  
“POWER” again.  
Notes:  
Play Position Memory Function  
• Even if you turn power off or switch the  
Ignition Key to OFF during playback or  
change the video source, playback will  
continue from the point where playback  
stopped when the power is turned ON  
again.  
The play position memory is released if  
the disc is removed or the Reset switch  
is pressed.  
With this unit connected to an Ai-NET compatible  
head unit, there will be about a 3 second delay during  
power-up from the remote control. This is caused by  
the systems communications being carried out by the  
various components and is not a defect.  
When connected with an Ai-NET compatible head  
unit, the power cannot be turned off from the remote  
control unit. Turn off the DVA-5205P’s power by  
switching the head unit’s source. For details, refer to  
“Operating from the head unit” (page 56).  
• Reading this manual  
Tips  
Stopping playback  
These indicate the discs for which  
the function can be used.  
DVD  
Video CD  
Stopping  
CD  
DVD  
playback  
...DVDs  
Press the stop button during playback to stop  
playback. That position is stored in the memory.  
Video CD  
...Video CDs  
Press L” during playback.  
CD  
...Music CDs  
Using the PRE-STOP function (DVD,  
Video CD only)  
Tips  
When the PRE-STOP function is used, the  
position at which playback is stopped is stored in  
the memory, and playback resumes from that  
position.  
This indicates supplementary  
explanation of operation of this  
system.  
Press L” once during playback.  
“PRE-STOP” is displayed.  
Press :” in the PRE-STOP mode.  
Playback starts from the position at which it  
was stopped.  
10  
Switching between NTSC and PAL configuration  
Adjusting the volume  
Switching between  
NTSC and PAL  
configuration  
Adjusting the volume  
Adjust the volume for connecting only  
with the Digital Audio Processor (PXA-  
H510).  
Switch the video output configuration to  
NTSC or PAL according to the type of  
television and the disc recording method.  
Move the rotary encoder to the  
right or left.  
Turn to the right to increase the volume.  
Turn to the left to decrease the volume.  
Press “NTSC/PAL” for  
at least 5 seconds.  
Notes:  
PAL is the standard and there is no need to  
change the setting. The system is set to PAL at  
time of shipment from the factory.  
• The image output configuration must be correct.  
Otherwise the following message appears and  
playback does not start: “VIDEO SIGNAL  
SYSTEM IS NOT CORRECT”.  
Note:If an Ai-NET product (head unit) has been  
connected in addition to the Digital Audio  
Processor (PXA-H510), or if this equipment is  
connected singly to a TV monitor, adjust the  
volume on the connected equipment.  
DVD  
Video CD  
CD  
Using the Number Keys.  
This describes use of the Number  
Keys, particularly the “+10” key.  
Tips  
To input 10: Press the “+10” key once  
and then press the “0” key.  
To input 16: Press the “+10” key once  
and then press the “6” key.  
To input 23: Press the “+10” key twice  
and then press the “3” key.  
* Each time the “+10” key is pressed,  
the number increases by 10.  
11  
Playing discs  
DVD  
Video CD  
Playing discs  
CD  
• With some DVDs, certain operations  
are disabled. Such operations are  
not possible on such DVDs.  
• The DVD functions described in this  
manual are not supported by all  
DVDs. See the individual DVDs  
instructions for details on the  
features supported.  
Caution  
• Fingerprints on a disc may  
adversely affect playback. If a  
problem occurs, remove the disc  
and check for fingerprints on the  
playback side. Clean the disc if  
necessary.  
• When using the remote control, be  
careful to press one button at time.  
Pressing multiple buttons at the  
same time may cause erroneous  
operation.  
• Even if you switch the power or the  
Ignition Key to OFF during playback  
or change the video source,  
playback will continue from the point  
where it stopped when the power is  
turned ON again.  
If the disc is removed or the Reset  
switch is pressed, the play position  
memory is released.  
Press :”.  
Playback starts.  
DVD  
Video CD  
• If a menu screen appears  
On DVDs and video CDs with playback control  
(PBC), menu screens may appear automati-  
cally. If this happens, perform the operation  
described below to start playback.  
Note: For many discs, the menu screen can also  
be displayed by pressing “MENU” or “TITLE”  
(for at least 2 seconds).  
12  
Stopping playback  
DVD menu  
DVD  
Video CD  
Stopping  
playback  
Use the “Joystick” or the number keys (“0” to “9”  
and “+10”) to select the desired item, then  
press “ENT” or “ :”.  
CD  
Press the stop button during playback to stop  
playback. That position is stored in the memory.  
1
2
3
SUB T. ON/OFF. AUDIO  
Press L” during playback.  
4
7
5
ANGLE  
6
9
or  
or  
8
OP/  
UP  
+10  
CL 0  
Using the PRE-STOP function (DVD,  
Video CD only)  
Tips  
When the PRE-STOP function is used, the  
position at which playback is stopped is stored in  
the memory, and playback resumes from that  
position.  
Press L” once during playback.  
“PRE-STOP” is displayed.  
Note: For some discs it is not possible to select  
items from the menu screen using the  
number keys (“0” to “9” and ”+10”).  
Video CD menu  
Use the number keys (“0” to “9” and ”+10”) to  
select the desired number, then press “ENT” or  
:”.  
Press :” in the PRE-STOP mode.  
Playback starts from the position at which it  
was stopped.  
1
2
3
SUB T. ON/OFF. AUDIO  
4
7
5
ANGLE  
6
9
8
OP/  
UP  
+10  
CL 0  
Canceling the PRE-STOP function  
Either press “ L ” again in the PRE-STOP mode  
or eject the disc and turn the power or the ignition  
key off to clear the memory.  
Notes:  
• For some discs, the position at which playback  
was stopped may not be accurate.  
• Playback starts at the beginning of the disc  
whenever ignition is turned off or another Ai-NET  
source is selected.  
or  
Note: The menu screen does not appear when the  
PBC function is turned off. If this is the  
case, press “MENU” to turn on the PBC  
function.  
13  
Fast-forwarding/fast-reversing  
Finding the beginnings of chapters or tracks  
DVD  
Video CD  
Fast-forwarding/  
fast-reversing  
CD  
During playback,  
press “ ” (fast-  
reverse) or “  
(fast-forward) for  
at least 2 seconds.  
or  
Press :” to return to  
normal playback.  
Notes:  
• No sound or subtitles are played during fast-  
forwarding/fast-reversing.  
• For DVDs and video CDs with playback control  
(PBC), the menu screen may reappear during  
fast-forwarding/fast-reversing.  
DVD  
Video CD  
Finding the begin-  
CD  
nings of chapters or tracks  
During playback,  
press“ ” or “  
”.  
The chapter/track switches  
each time the button is  
pressed, and playback of  
the selected chapter/track  
starts.  
or  
: Press this to start playback from the  
beginning of the following chapter or  
track.  
: Press this to start playback from the  
beginning of the current chapter or  
track.  
14  
Playing still frames (pausing)  
Frame-by-frame playback  
Slow motion playback  
DVD  
Frame-by-frame  
playback  
Note: Some DVDs do not have chapters.  
Video CD  
In the pause mode,  
Supplementary explanation  
“Chapters” are divisions of movies or  
musical selections on DVDs.  
“Tracks” are divisions of movies or musical  
selections on video and music CDs.  
press “  
”.  
The picture advances by  
one frame each time the  
button is pressed.  
Press :” to resume  
normal playback.  
DVD  
Video CD  
Note: No sound is played during frame-by-frame  
Playing still  
playback.  
CD  
frames (pausing)  
During playback,  
DVD  
Slow motion  
playback  
press “  
” once.  
Video CD  
During playback,  
press “SLOW” for  
at least 2 seconds.  
Press :” to resume  
playback.  
Press :” to resume  
normal playback.  
Notes:  
• No sound is played during the still frame mode.  
• When a playback starts after about 5 minutes of  
temporary still (pause), a picture or sound may  
stop for an instant period, but this is not a failure.  
Notes:  
• During the slow motion playback, the playback  
speed may change or the playback may skip to  
the next picture depending on the disc, but this is  
not a failure.  
• No sound is played during slow motion playback.  
• Slow playback is not available when playing back  
a slide show.  
15  
Searching by title number  
DVD  
Searching by title  
number  
Use this function to easily find positions  
on the DVD using the DVD’s title menu.  
During playback, press  
“GO TO”.  
The mode switches each  
time the button is pressed.  
Select “TITLE”.  
TITLE  
CHAPT  
TIME  
Normal playback  
Input the number of the  
title you want to play  
using the number keys  
(“0” to “9”).  
1
2
3
SUB T. ON/OFF. AUDIO  
4
7
5
ANGLE  
6
9
8
OP/  
CL 0  
(When title number 1 is input)  
Notes:  
• This function cannot be used on discs on which  
no title numbers are recorded.  
To input the title number, the “+10” key is not  
used. Use the number keys “0” to “9”.  
• Press “CLR” to delete the last digit in the title  
number. Press “CLR” for at least 2 seconds to  
clear all title numbers.  
• Press “RTN” to cancel the title search mode and  
resume normal playback.  
16  
Searching directly by chapter or track number  
Notes:  
Press “ENT”.  
Playback starts from the  
selected title number.  
• This function cannot be used on discs on which  
no chapter numbers are recorded.  
To input the chapter or track number, the “+10”  
key is not used. Use the number keys “0” to “9”.  
• Press “CLR” to delete the last digit in the chapter/  
track number. Press “CLR” for at least 2 seconds  
to clear “Chapter” and “Track” numbers.  
• Press “RTN” to cancel the chapter/track search  
mode and resume normal playback.  
• With video discs containing playback control  
(PBC), function of “searching directly by track  
number” is not available under the PBC ON  
status. Press “MENU” to turn the PBC function off.  
DVD  
Video CD  
Searching  
Press “ENT”.  
Playback starts from the  
selected chapter or track.  
CD  
directly by chapter  
or track number  
Use this function to easily move to the  
beginnings of the chapters or tracks on the  
disc.  
During playback, press “GO TO”.  
The mode switches each time the button  
is pressed. Select “CHAPT” or “TRACK”.  
DVD Video  
Normal playback  
TITLE  
CHAPT  
TIME  
TIME  
Video-CD/CD  
TRACK  
Normal playback  
Input the number of the  
chapter or track you  
want to play using the  
number keys (“0” to  
“9”).  
1
2
3
SUB T. ON/OFF. AUDIO  
4
7
5
ANGLE  
6
9
8
OP/  
CL 0  
(When chapter number 12 is input)  
17  
Searching by elapsed time  
DVD  
Video CD  
Searching by  
elapsed time  
CD  
Use this function to search by specifying  
the elapsed time.  
During playback, press “GO TO”.  
The mode switches each time the button  
is pressed. Select “TIME”.  
DVD Video  
Normal playback  
TITLE  
CHAPT  
TIME  
TIME  
Video-CD/CD  
TRACK  
Normal playback  
Input the elapsed time  
from which you want to  
start playback using the  
number keys (“0” to  
“9”).  
1
2
3
SUB T. ON/OFF. AUDIO  
4
7
5
ANGLE  
6
9
8
OP/  
CL 0  
(When 1 hour, 30 minutes is input as the  
elapsed time)  
Notes:  
• Input the hours first, followed by the minutes, then  
the seconds.  
To input the elapsed time, the “+10” key is not  
used. Use the number keys “0” to “9”.  
• Press “CLR” to delete the last digit in the elapsed  
time. Press “CLR” for at least 2 seconds to erase  
all the set times.  
• Press “RTN” to cancel the elapsed time search  
mode and resume normal playback.  
• With DVDs, the precision of the elapsed time  
search function differs from disc to disc.  
• With video discs containing playback control  
(PBC), function of “searching by elapsed time” is  
not available under the PBC ON status. Press  
“MENU” to turn the PBC function off.  
18  
Chapter/track/title repeat playback  
Switching the audio language  
DVD  
Switching the  
audio language  
Press “ENT”.  
Playback starts from the  
specified elapsed time.  
Video CD  
On DVDs including multiple audio modes or  
multiple audio languages, the audio  
language can be switched during playback.  
During playback,  
press “AUDIO” for  
at least 2 seconds.  
The sound switches  
between the different  
audio modes recorded on the  
disc each time the button is  
pressed.  
DVD  
Video CD  
Chapter/track/  
title repeat  
playback  
Notes:  
CD  
• The language selected with the default settings is  
set when the power is turned on or the disc is  
replaced. If the disc does not include that  
language, the disc’s default language is set.  
• For some discs it is not possible to switch the  
audio language during playback.  
Use this function to play the disc’s titles,  
chapters or tracks repeatedly.  
• Some time may be required for the audio  
language to change.  
RPT  
DISC  
During playback, press  
“RPT”.  
The repeat mode switches  
each time the button is  
pressed.  
• Video CDs with multiplex audio  
During playback,  
press “AUDIO” for  
at least 2 seconds.  
The combination of the  
left and right channels  
changes each time the button is  
pressed.  
DVD  
The chapter is  
Chapter  
played repeatedly.  
The title is  
played repeatedly.  
Title  
Repeat off  
The mode returns  
to normal playback.  
(setting at factory  
shipping)  
LL  
R R  
LR  
Video CD  
CD  
The track is  
played repeatedly.  
Track  
The entire disc is  
played repeatedly.  
Disc  
(setting at factory  
shipping)  
Repeat off  
Note: The track/disc repeat modes cannot be  
used on video CDs with playback control  
(PBC). Press “MENU” to turn the PBC  
function off.  
19  
Switching the angle  
Switching the subtitles (subtitle language)  
DVD  
Switching the angle  
With DVDs on which images photo-  
graphed from multiple angles are  
recorded, the angle can be switched  
during playback.  
During playback, press  
“ANGLE” for at least 2  
seconds.  
The angle switches between  
the angles recorded on the disc  
each time the button is pressed.  
Notes:  
• Some time may be required for the angle to  
change.  
• Depending on the disc, the angle may switch in  
one of two ways.  
- Seamless  
: The angle switches smoothly.  
- Non-seamless : When the angle is switched, a  
still picture is displayed first,  
after which the angle switches.  
DVD  
Switching the  
subtitles (subtitle  
language)  
With DVDs on which multiple subtitle  
languages are recorded, the subtitle  
language can be switched during playback.  
During playback,  
press “SUB T.” for  
at least 2 seconds.  
The subtitle language  
switches between the languages  
recorded on the disc each time  
the button is pressed.  
Notes:  
• Some time may be required for the subtitle  
language to change.  
• The language selected with the default settings is  
set when the power is turned on or the disc is  
replaced. If the disc does not include that  
language, the disc’s default language is set.  
20  
Displaying the subtitles  
Displaying the disc status  
DVD  
DVD  
Displaying the  
subtitles  
Displaying the  
disc status  
Use the procedure described below to display  
the status (title number, chapter number, etc.) of  
the currently playing DVD on the screen.  
With DVDs on which subtitles are recorded,  
you can select whether to display the subtitles  
or not during playback.  
During playback, press  
“DISP.”.  
The playback status is  
displayed.  
During playback,  
DISP.  
TUNER  
press “– ON/OFF” for at  
least 2 seconds.  
The currently displayed  
subtitles are turned on and off  
each time the button is pressed.  
Note: For some discs, the subtitles will be  
displayed even when this is set to off.  
Switching from the menu  
For some discs, the audio language, angle and  
subtitles can be switched from the disc menu.  
Tips  
Press “MENU” or “TITLE” (for at least  
2 seconds), select the item, then  
press “ENT”.  
or  
Press “DISP.” once  
more to turn the  
display off.  
DISP.  
TUNER  
Use the “Joystick” or the number  
keys (“0” to “9” and “+10”) to select  
the language or angle, then press  
“ENT” or “:”.  
1
2
3
SUB  
T.  
ON/OFF.  
AUDIO  
4
7
5
ANGLE  
6
9
8
OP/  
UP  
+10  
CL 0  
or  
or  
21  
Displaying the disc status  
Video CD  
Displaying the  
disc status  
CD  
Use the procedure described below to display  
the status (track number, etc.) of the currently  
playing video CD or music CD on the screen.  
During playback, press  
“DISP.”.  
DISP.  
TUNER  
The playback status is  
displayed.  
Note: For music CDs, the playing status is  
displayed even when “DISP.is not pressed.  
Press “DISP.” once  
more to turn the  
display off.  
DISP.  
TUNER  
22  
Video output ON/OFF  
Video output ON/OFF  
(Only when CVA-1005R/IVA-M700R/  
IVA-C800R is connected)  
Note: This output is at a fixed level and requires a  
preamp with a volume control to adjust  
listening levels.  
When this unit is used with the CVA-  
1005R/IVA-M700R/IVA-C800R + the  
TME-M750 (Extra Monitor for Rear Seat),  
the DVD video can be viewed independ-  
ently of what’s being viewed on the CVA-  
1005R/IVA-M700R/IVA-C800R.  
For example, DVD video can be moni-  
tored on the Rear Monitor, while a  
Navigation map is displayed on the CVA-  
1005R/IVA-M700R/IVA-C800R. If an  
audio source is selected, the main audio  
system will be used to listen to the CVA-  
1005R/IVA-M700R/IVA-C800R. Use the  
RCA connectors at the rear of the DVA-  
5205P to feed audio to your Rear monitor.  
Set AUX OUT of “Selecting Rear  
Monitor” on the CVA-1005R/IVA-  
M700R/IVA-C800R side to AUX 1.  
Change the source on the CVA-  
1005R/IVA-M700R/IVA-C800R  
side to MD, CD, radio, etc.  
Use the “Playing 2 Sources  
Simultaneously” function on the  
CVA-1005R/IVA-M700R/IVA-  
C800R side to select DVD with  
the V.SEL button.  
Press “V.OUT” on the  
remote control unit for  
this equipment at least  
2 seconds.  
To release, press “V.OUT” for  
at least 2 seconds.  
Note: Refer to the Instruction Manual of the CVA-  
1005R/IVA-M700R/IVA-C800R for operation  
on the CVA-1005R/IVA-M700R/IVA-C800R  
side.  
23  
Changing the default settings (setup)  
Changing the language settings  
SET UP  
Changing the default  
settings (setup)  
The factory default settings can be  
changed to suit your personal prefer-  
ences and usage.  
In the stop mode, press  
“SET” for at least 2  
seconds.  
The default setting menu  
appears.  
Note: This operation cannot be performed in the  
PRE-STOP mode.  
Use the “Joystick” to  
make the selection,  
then press “ENT”.  
For the procedure after  
selecting the setting item,  
refer to the pages  
o
indicated on the table below.  
Note: When the settings are changed, the old  
settings are overwritten. Make a note of the  
current settings before making changes.  
The settings are not cleared even when the  
vehicle’s battery is disconnected.  
See  
page  
Item  
Description  
LANGUAGES Set the audio language, subtitle P24  
language and menu language.  
TV SCREEN Set the screen size according to  
the type of TV monitor being used.  
P26  
COUNTRY  
CODE  
Set the country code when  
setting the rating level.  
P27  
Changing the  
language settings  
The audio language, subtitle language and  
menu language can be set according to your  
preferences.  
RATING  
LEVEL  
Set the rating level (parental P28  
lock).  
DOWN  
SAMPLING  
Takes DVD digital sound and P30  
converts it into 48 kHz/16 bit  
sampling digital sound.  
DIGITAL OUT Set the digital output.  
LED Set whether the front panel’s P34  
INDICATOR LED indicators are on or off.  
P32  
Select “LANGUAGES” under  
“Changing the default settings  
(SET UP)” on page 24.  
CUSTOM  
SETUP  
Set the Closed Caption and P35  
Ai-NET setting.  
24  
SET UP  
Changing the language settings  
ORIGINAL  
The disc is played with the audio  
language set as the priority language for  
the disc. (AUDIO only)  
Use the “Joystick” to  
make the selection, then  
press “ENT”.  
AUTO  
The disc is played with the subtitle  
language set as the priority language for  
the disc. (SUBTITLE/MENU LANGUAGE  
only)  
OTHERS  
Set this to play the disc with a language  
other than one of the languages dis-  
played. Use the keys “0” to “9” to input  
the 4-digit language code, then press  
“ENT”. For the language codes, refer to  
“List of language codes” (page 61).  
AUDIO  
Set the audio language produced from  
the speakers.  
Use the “Joystick” to select the  
desired language, then press  
“ENT”.  
SUBTITLE  
Set the language of the subtitles dis-  
played on the screen.  
MENU LANGUAGE  
Set the language used for the menus (title  
menu, etc.).  
The setup screen for the selected  
language is displayed.  
Displays the setting contents.  
SET UP  
AUDIO  
(audio languages)  
Notes:  
SUBTITLE  
• If the disc does not include the selected  
language, the disc’s default language is set.  
• Languages set upon shipment from the factory:  
Audio language : ORIGINAL  
(subtitle languages)  
Subtitle language : AUTO  
Menu language : AUTO  
• Press “RTN” to return to the previous screen.  
Press “SET” for at least  
2 seconds.  
The settings are stored and  
the set up mode is canceled.  
MENU  
LANGUAGE  
(menu languages)  
25  
SET UP  
Changing the TV screen settings  
Changing the TV  
screen settings  
Use the procedure described below to set  
the output screen according to the type of  
TV monitor being used.  
Select “TV SCREEN” under  
“Changing the default settings  
(SET UP)” on page 24.  
Use the “Joystick” to  
make the selection,  
then press “ENT”.  
4 : 3 LETTERBOX  
Select this when connected to a conventional  
4:3 size (normal TV aspect ratio) monitor.  
There may be black stripes visible at the top  
and bottom of the screen. The width of these  
stripes will depend upon the original aspect  
ratio of the theatrical release of the movie.  
4 : 3 PAN-SCAN  
Select this when connected to a conventional  
4:3 size monitor. The picture will fill the entire  
TV screen. However, due to the mismatch in  
aspect ratio, parts of the movie at the extreme  
left and right sides will not be visible.  
26  
SET UP  
Changing the country code setting  
16 : 9 WIDE  
Press “ENT” to reset the  
country code.  
Select this when connected to a wide screen  
TV. This is selected upon shipment from the  
factory.  
Use keys “0” to “9” to input the  
4-digit country code, then press  
“ENT”.  
Displays the setting contents.  
1
2
3
SUB T. ON/OFF. AUDIO  
4
7
5
ANGLE  
6
9
8
OP/  
CL 0  
Notes:  
• For some discs, the picture may not be set to the  
selected screen size. (For details, refer to the  
explanation on the disc’s jacket.)  
• Press “RTN” to return to the previous screen.  
Press “SET” for at least  
2 seconds.  
Displays the setting contents.  
SET UP  
The settings are stored  
and the set up mode is  
canceled.  
Changing the country  
code setting  
Set the country code when setting the  
rating level (Parental lock).  
Notes:  
• For the country codes, refer to “List of country  
codes” (Page 63).  
• Can be erased one digit at a time each time  
“CLR” is pressed.  
• Press “RTN” to return to the previous screen.  
Select “COUNTRY CODE” under  
“Changing the default settings  
(SET UP)” on page 24.  
Press “SET” for at least  
2 seconds.  
The settings are stored  
and the set up mode is  
canceled.  
27  
SET UP  
Setting the rating level (parental lock)  
Setting the rating  
level (parental lock)  
Use this function to restrict the viewing  
of movies to children of appropriate  
age levels only.  
Select “RATING LEVEL” under  
“Changing the default settings  
(SET UP)” on page 24.  
Press “ENT”.  
The password input mode is set.  
Use keys “0” to “9” to input the 4-  
digit password.  
The default password is 1111 upon  
shipment from the factory.  
1
2
3
SUB T. ON/OFF. AUDIO  
4
7
5
ANGLE  
6
9
8
OP/  
CL 0  
Input numbers are  
displayed “ ”.  
Press “ENT”.  
28  
SET UP  
Setting the rating level (parental lock)  
Use the “Joystick” to select the  
• Changing the rating level temporarily  
Some discs may request that you change the  
rating level set in the default settings during  
playback. In this case, the following message  
appears on the screen:  
rating level, then press “ENT”.  
Select “OFF” to cancel the parental lock  
or if you do not want to set a rating level.  
The higher the number, the higher the  
rating level.  
Tips  
Still picture  
Still Picture  
When this appears, if you do not input the correct  
password either playback does not continue or a  
picture for a different rating level is played.  
Displays the setting contents.  
Note: Press “RTN” to return to the previous  
screen.  
Press “SET” for at least  
2 seconds.  
SET UP  
The settings are stored  
and the set up mode is  
canceled.  
Notes:  
• If you want to change the password, select  
“CHANGE PASSWORD”, then input the new  
password (4 digits).  
• Write down the password on a piece of paper and  
store the piece of paper somewhere in case you  
forget it.  
• On unrated DVDs, playback will not be restricted  
even if the rating level is set.  
• Once set, this rating level remains in memory  
until changed. To enable the play of discs of  
higher rating levels or to cancel the parental lock,  
the setting must be changed.  
• Not all DVDs provide a Parental Lock feature. If  
you are unsure about a DVD, play it first to  
confirm. Do not leave DVDs accessible to young  
children for whom you deem them inappropriate.  
.
29  
SET UP  
Changing the down sampling setting  
Changing the down  
sampling setting  
Converts linear PCM (LPCM) voice  
signals recorded on the DVD disc to  
downsampling 48 kHz/16 bit digital  
signals and outputs them from the optical  
cable.  
Select “DOWN SAMPLING” under  
“Changing the default settings  
(SET UP)” on page 24.  
Move the “Joystick” up and  
down to choose “ON” or “OFF”  
and, then press “ENT”.  
ON  
The digital signals recorded on the DVD  
disc with 96 kHz/24bit, 48 kHz/24bit, 48  
kHz/20bit sampling are converted into  
digital signals with 48 kHz/16bits  
sampling for output from the optical cable.  
Set to ON at time of shipment from  
factory.  
OFF  
The digital signals recorded on the DVD  
disc with 96 kHz/24bit, 48 kHz/24bit, 48  
kHz/20bit sampling are not converted into  
digital signals with 48 kHz/16bits  
sampling. They are not output from the  
optical cable.  
30  
SET UP  
Changing the down sampling setting  
Displays the setting contents.  
Note: Press “RTN” to return to the previous  
screen.  
Press “SET” for at least  
2 seconds.  
The settings are stored  
and the set up mode is  
canceled.  
SET UP  
31  
SET UP  
Changing the digital output setting  
Changing the digital  
output setting  
Use the following procedure to set the  
audio signal output from the DVA-5205P.  
Select “DIGITAL OUT” under  
“Changing the default settings  
(SET UP)” on page 24.  
Use the “Joystick” to make the  
selection, then press “ENT”.  
AUTO  
The digital output is switched automatically  
according to the type of audio signals being  
played.  
Be sure to select “AUTO” when you want to  
connect a digital audio processor and play  
Dolby Digital audio. “AUTO” is selected upon  
shipment from the factory.  
LPCM  
The audio signals recorded on the disc are  
converted into 48 kHz/16 bit (for DVDs) or 44.1  
kHz (for video CDs and CDs) linear PCM audio  
signals for output.  
32  
SET UP  
Changing the digital output setting  
Displays the setting contents.  
Press “SET” for at least  
2 seconds.  
The set up are stored and  
the set up mode is canceled.  
Note: Press “RTN” to return to the previous  
screen.  
• Audio output/Optical digital audio output  
Disc  
Audio recording  
format  
Digital output  
setting  
Down sampling Optical digital audio Analog audio  
setting  
output (when a  
digital audio  
processor is  
connected)  
output (Ai-NET,  
RCA output)  
DVD  
DTS  
AUTO  
LPCM  
AUTO  
LPCM  
AUTO  
LPCM  
AUTO  
LPCM  
ON  
OFF  
DTS  
X
X
DTS  
ON  
X
X
SET UP  
OFF  
X
X
Dolby Digital  
ON  
Dolby Digital  
O
O
O
O
O
O
O
O
O
O
O
O
O
O
OFF  
Dolby Digital  
ON  
LPCM (48kHz/16 bit)  
OFF  
X
Linear PCM  
(48 kHz)  
ON  
LPCM (48kHz/16 bit)  
OFF  
X
ON  
LPCM (48kHz/16 bit)  
OFF  
X
Linear PCM  
(96 kHz)  
ON  
LPCM (48kHz/16 bit)  
X
OFF  
ON  
LPCM (48kHz/16 bit)  
X
OFF  
Video CD  
CD  
MPEG  
AUTO or LPCM  
AUTO or LPCM  
ON or OFF  
ON or OFF  
LPCM (44.1kHz)  
LPCM (44.1kHz)  
Linear PCM  
33  
SET UP  
Changing the LED indicator setting  
Changing the LED  
indicator setting  
Use the following procedure to set whether or  
not the product’s LED indicators are on or off.  
Select “LED INDICATOR” under  
“Changing the default settings  
(SET UP)” on page 24.  
Use the “Joystick” to select the  
“ON” or “OFF”, then press  
“ENT”.  
ON  
The LED indicators are lit, indicating the  
product’s operating status. “ON” is selected  
upon shipment from the factory.  
OFF  
The LED indicators are turned off.  
When “OFF” is set, the indicators do not light  
even when the power is on.  
34  
SET UP  
Custom setting – Changing the Closed Caption setting  
Displays the setting contents.  
Move the “Joystick” up and  
down to select “ON” or “OFF”,  
then press “ENT”.  
Note: Press “RTN” to return to the previous  
screen.  
Press “SET” for at  
least 2 seconds.  
The settings are stored  
and the set up mode is  
canceled.  
ON  
Displays the closed captions.  
Custom setting –  
Changing the Closed  
Caption setting  
OFF  
Does not display the closed captions.  
Set to OFF at time of shipment from  
factory.  
DVD includes so-called “closed captions”  
which describe the scene to persons with  
impaired hearing. It is possible to turn the  
closed captions ON and OFF.  
Displays the setting contents.  
SET UP  
Select “CUSTOM SETUP” under  
“Changing the default settings  
(SET UP)” on page 24.  
Move the “Joystick” up and  
down to select “CLOSED CAP-  
TION”, then press “ENT”.  
Notes:  
• Please be aware that closed captions are  
different from titles.  
• Press “RTN” to return to the previous screen.  
Press “SET” for at  
least 2 seconds.  
The settings are stored  
and the set up mode is  
canceled.  
35  
SET UP  
Custom setting – Changing the Ai-NET settings  
Custom setting –  
Changing the Ai-NET  
settings  
The Ai-NET settings are used to output the  
sound of connected Ai-NET products.  
Select “CUSTOM SETUP” under  
“Changing the default settings  
(SET UP)” on page 24.  
Use the “Joystick” to select “Ai-  
NET SETUP”, then press “ENT”.  
Use the “Joystick” to select  
“DVD” or “CD”, then press  
“ENT”.  
36  
SET UP  
Custom setting – Changing the Ai-NET settings  
DVD  
Press “SET” for at least  
2 seconds.  
The settings are stored  
and the set up mode is  
canceled.  
Set to “DVD” when connected to the CVA-  
1005R/IVA-M700R/IVA-C800R.  
Operations can be performed using the CVA-  
1005R/IVA-M700R/IVA-C800R’s main menu  
screen.  
For details, refer to the operating instructions of  
the CVA-1005R/IVA-M700R/IVA-C800R.  
“DVD” is selected upon shipment from the  
factory.  
Turn off the vehicle’s ignition, then turn  
it on again.  
CD  
Set to “CD” when connected to an Ai-NET  
product (head unit) other than the CVA-1005R/  
IVA-M700R/IVA-C800R (for ex.: CVA-1000R).  
Operations can be performed from the head  
unit.  
For details, refer to “Operating from the head  
unit” (page 56).  
Notes:  
Cases in which DVDs cannot be played on the  
CVA-1005R/IVA-M700R/IVA-C800R side  
– When “DVD” is not displayed on the CVA-1005R/  
IVA-M700R/IVA-C800R side menu screen  
– When DVDs cannot be played even when AUX1  
is selected  
Displays the setting contents.  
This is because the DVA-5205P’s Ai-NET setting is  
set to “CD”.  
Use the procedure described below to change the  
setting.  
1. Remove the disc from the DVA-5205P.  
2. Turn on the power of the DVA-5205P and CVA-  
1005R/IVA-M700R/IVA-C800R.  
Also start up the CVA-1005R/IVA-M700R/IVA-  
C800R monitor.  
3. Press the CVA-1005R/IVA-M700R/IVA-C800R  
SOURCE switch and select “CD” from the menu.  
4. Press the SOURCE switch, then select “V.SEL”  
from the menu.  
5. In the V.SEL mode, select “AUX1”. This displays  
the DVA-5205P screen.  
6. On the DVA-5205P, set the Ai-NET setting to  
“DVD”. Refer to “Changing the Ai-NET settings”  
(pages 36 and 37).  
7. Turn the car’s ignition switch off, then turn it back  
on.  
Notes:  
• Press “RTN” to return to the previous screen.  
• If the Ai-NET setting is “CD” when used with the  
CVA-1005R/IVA-M700R/IVA-C800R, operation  
from the main menu screen is not possible.  
• If the Ai-NET setting is “DVD” when used with any  
Ai-NET compatible head unit other than the CVA-  
1005R/IVA-M700R/IVA-C800R, volume is the  
only operation possible from the head unit.  
To call the DVD video by using the CVA-1000R,  
switch the mode to “AUX” with the V. SEL button  
on the CVA-1000R.  
SET UP  
• When the Ai-NET setting is “CD”, the operable  
functions and displays may differ depending on  
the Ai-NET compatible head unit connected.  
37  
SET UP  
Custom setting – Changing the H.U. CONTROL settings  
Custom setting –  
Changing the H.U.  
CONTROL settings  
When connecting this equipment with an  
Ai-NET compatible head unit or an Ai-  
NET compatible AV head unit (CVA-  
1005R/IVA-M700R/IVA-C800R), set the  
equipment so that it is possible to control  
from the head unit.  
Select “CUSTOM SETUP” under  
“Changing the default settings  
(SET UP)” on page 24.  
Move the “Joystick” up and  
down to select “H.U. CONTROL”,  
then press “ENT”.  
Move the “Joystick” up and  
down to select “ON” or “OFF”,  
then press “ENT”.  
38  
SET UP  
Custom setting – Changing the H.U. CONTROL settings  
ON  
Possible to operate from an Ai-NET  
compatible head unit or an Ai-NET  
compatible AV head unit (CVA-1005R/  
IVA-M700R/IVA-C800R).  
OFF  
Not possible to operate from an Ai-NET  
compatible head unit or an Ai-NET  
compatible AV head unit (CVA-1005R/  
IVA-M700R/IVA-C800R). Set to OFF at  
time of shipment from factory.  
Displays the setting contents.  
Note: Press “RTN” to return to the previous  
screen.  
Press “SET” for at  
least 2 seconds.  
The settings are stored  
and the set up mode is  
canceled.  
SET UP  
39  
Operating the digital audio processor (optional)  
DVD  
Video CD  
Operating the  
digital audio  
CD  
processor (optional)  
When used with a digital audio processor (PXA-  
H510), operation is possible from the remote  
control unit included with the DVA-5205P. Also  
refer to the PXA-H510’s operating instructions.  
During playback,  
press “A.PROC”.  
The setting menu appears.  
Use the “Joystick” to  
make the selection, then  
press “ENT”.  
For the procedure after  
making a selection, refer  
to the pages indicated on  
the table below.  
See  
Item  
Description  
page  
PARAMETRIC- Adjust the parametric equalizer’s band frequency, P41  
EQ  
band width and level.  
SURROUND  
Select one of six surround modes according to the P42  
music source using DSP (digital signal processing).  
PRIVATE-  
MEMORY  
Store and recall up to six parametric equalizer  
adjustments and settings.  
P43  
TIME-  
Eliminate time delays resulting from the distance  
P45  
CORRECTION between the listening position and the speakers.  
DOLBY  
SURROUND  
MODE  
Switch between the Dolby Digital input and the Pro P45  
Logic input.  
ADJUST  
MODE  
Adjust the speaker mode, speaker level, etc.  
Adjust the volume, fader, balance, etc.  
P46  
P53  
40  
Adjusting the parametric equalizer  
Adjusting the  
parametric equalizer  
Use the “Joystick” to select the  
band width (Q-FACT), then press  
“ENT”.  
Select “PARAMETRIC-EQ” under  
“Operating the digital audio  
processor (optional)” on page 40.  
Use the “Joystick” to adjust the  
band width, then press “ENT”.  
Use the “Joystick” to select the  
band to be set, then press “ENT”.  
The band whose frequency is indicated in  
yellow can be adjusted. The parametric  
equalizer’s setting screen consists of two  
pages. Press “BAND” for at least 2  
seconds to switch between pages 1 and  
2.  
Use the “Joystick” to select the  
level (LV), then press “ENT”.  
Use the “Joystick” to adjust the  
level, then press “ENT”.  
Note: Press “RTN” to return to the previous  
screen.  
Use the “Joystick” to adjust the  
frequency, then press “ENT”.  
Press “A.PROC”  
to close the  
digital audio  
processor screen  
and return to the play-  
back screen.  
41  
Adjusting the surround settings  
Adjusting the  
surround settings  
This adjustment is not possible when Dolby  
Digital or Pro Logic is turned on for the DVA-  
5205P’s audio output.  
Select “SURROUND” under  
“Operating the digital audio  
processor (optional)” on page 40.  
Use the “Joystick” to select the  
surround mode, then press “ENT”.  
There are six surround modes.  
Press “ENT”.  
The level (LV) value turns  
yellow.  
Use the “Joystick” to adjust the  
level (LV), then press “ENT”.  
42  
Storing the surround settings  
Use the “Joystick” to select  
“WRITE”, then press “ENT”.  
Use the “Joystick” to select the  
time (echo time), then press  
“ENT”.  
Use the “Joystick” to adjust the  
time, then press “ENT”.  
Use the “Joystick” to select the  
memory location at which you  
want to store the settings (“PRI-  
VATE-MEMORY 1” to “PRIVATE-  
MEMORY 6”), then press “ENT”.  
Note: Press “RTN” to return to the previous  
screen.  
Press “A.PROC”  
to close the  
digital audio  
processor screen  
and return to the play-  
back screen.  
Note: Press “RTN” to return to the previous  
DVD  
Video CD  
screen.  
Storing the  
surround settings  
Select “PRIVATE-MEMORY” under  
“Operating the digital audio  
CD  
Press “A.PROC”  
to close the  
digital audio  
processor screen  
and return to the play-  
back screen.  
processor (optional)” on page 40.  
43  
Recalling the surround settings  
DVD  
Video CD  
Recalling the  
surround settings  
CD  
Select “PRIVATE-MEMORY” under  
“Operating the digital audio  
processor (optional)” on page 40.  
Use the “Joystick” to select the  
memory location you want to  
recall (“PRIVATE-MEMORY 1” to  
“PRIVATE-MEMORY 6”), then  
press “ENT”.  
Note: Press “RTN” to return to the previous  
screen.  
Press “A.PROC”  
to close the  
digital audio  
processor screen  
and return to the play-  
back screen.  
44  
Adjusting the time compensation  
Using the Pro Logic mode  
DVD  
Video CD  
DVD  
Video CD  
Adjusting the  
Using the Pro  
Logic mode  
CD  
CD  
time compensation  
Select “DOLBY SURROUND  
MODE” under “Operating the  
digital audio processor (optional)”  
on page 40.  
Select “TIME-CORRECTION”  
under “Operating the digital audio  
processor (optional)” on page 40.  
Use the “Joystick” to make the  
selection, then press “ENT”.  
Use the “Joystick” to select the  
speaker to be adjusted, then  
press “ENT”.  
Use the “Joystick” to adjust the  
time, then press “ENT”.  
DOLBY DIGITAL  
“DOLBY DIGITALis set automatically  
when the disc is Dolby Digital compatible  
and the DVD video player’s audio output  
setting is set to “AUTO”.  
DOLBY PRO LOGIC  
“DOLBY PRO LOGIC” or “OFF” can be  
selected when the disc is Dolby Pro Logic  
compatible and the DVD video player’s  
audio output setting is set to “LPCM”.  
When “OFF” is selected, the surround  
settings cannot be adjusted.  
Note: Press “RTN” to return to the previous  
screen.  
Press “A.PROC”  
to close the  
Note: Press “RTN” to return to the previous  
screen.  
digital audio  
processor screen  
and return to the play-  
back screen.  
Press “A.PROC”  
to close the  
digital audio  
processor screen  
and return to the play-  
back screen.  
45  
ADJUST – Setting the speaker mode  
DVD  
Video CD  
ADJUST –  
CD  
Setting the  
speaker mode  
This adjustment cannot be made when  
Dolby Pro Logic is set to “OFF”.  
Select “ADJUST” under “Operat-  
ing the digital audio processor  
(optional)” on page 40.  
Use the “Joystick” to select the  
speaker to be set (“FRONT”,  
“CENTER” or “REAR”), then press  
“ENT”.  
Use the “Joystick” to switch the  
mode.  
FRONT  
LARGE/SMALL  
CENTER  
OFF/LARGE/SMALL  
REAR  
OFF/LARGE/SMALL  
Note: Press “RTN” to return to the previous  
screen.  
46  
ADJUST – Adjusting the acoustic image  
Press “A.PROC”  
to close the  
Use the “Joystick” to select the  
level item, then press “ENT”.  
digital audio  
processor screen  
and return to the play-  
back screen.  
DVD  
Video CD  
ADJUST –  
CD  
Use the “Joystick” to  
adjust the level, then press “ENT”.  
Adjusting the  
acoustic image  
This adjustment cannot be made when  
Dolby Pro Logic is set to “OFF”.  
Select “ADJUST” under “Operat-  
ing the digital audio processor  
(optional)” on page 40.  
Note: Press “RTN” to return to the previous  
screen.  
Use the “Joystick” to select “BI-  
PHANTOM”, then press “ENT”.  
Press “A.PROC”  
to close the  
digital audio  
processor screen  
and return to the play-  
back screen.  
Use the “Joystick” to select the  
mode (“ON” or “OFF”), then press  
“ENT”.  
Note: The “BI-PHANTOM” setting is automatically  
set to “OFF” when the center speaker is set  
to “OFF”.  
47  
ADJUST – Mixing the rear audio channels  
DVD  
Video CD  
ADJUST –  
CD  
Mixing the rear  
audio channels  
Use this function to mix the audio signals  
for the front to those output from the rear  
speakers.  
Select “ADJUST” under “Operat-  
ing the digital audio processor  
(optional)” on page 40.  
Use the “Joystick” to  
select “REAR MIX”, then press  
“ENT”.  
Use the “Joystick” to select the  
mode (“ON” or “OFF”), then press  
“ENT”.  
Note: The “REAR MIX” setting is automatically set  
to “OFF” when the rear speaker is set to  
“OFF”.  
Use the “Joystick” to select the  
level item, then press “ENT”.  
48  
ADJUST – Center speaker time compensation  
DVD  
Video CD  
ADJUST –  
Center speaker  
time compensation  
Use the “Joystick” to adjust the  
level, then press “ENT”.  
CD  
Compensation is not possible when the  
center speaker is set to “OFF”.  
Select “ADJUST” under “Operat-  
ing the digital audio processor  
(optional)” on page 40.  
Note: Press “RTN” to return to the previous  
screen.  
Use the “Joystick” to select  
“CENTER DELAY”, then press  
“ENT”.  
Press “A.PROC”  
to close the  
digital audio  
processor screen  
and return to the play-  
back screen.  
Use the “Joystick” to adjust the  
level, then press “ENT”.  
Note: Press “RTN” to return to the previous  
screen.  
Press “A.PROC”  
to close the  
digital audio  
processor screen  
and return to the play-  
back screen.  
49  
ADJUST – Rear speaker time compensation  
DVD  
Video CD  
ADJUST –  
Rear speaker time  
compensation  
CD  
Compensation is not possible when the  
rear speakers are set to “OFF”.  
Select “ADJUST” under “Operat-  
ing the digital audio processor  
(optional)” on page 40.  
Use the “Joystick” to select  
“REAR DELAY”, then press  
“ENT”.  
Use the “Joystick” to adjust the  
level, then press “ENT”.  
Note: Press “RTN” to return to the previous  
screen.  
Press “A.PROC”  
to close the  
digital audio  
processor screen  
and return to the play-  
back screen.  
50  
ADJUST – Achieving powerful sound at low volumes  
DVD  
Video CD  
ADJUST –  
Press “A.PROC”  
to close the  
digital audio  
processor screen  
and return to the play-  
back screen.  
CD  
Achieving powerful  
sound at low volumes  
This setting is only possible with Dolby  
Digital outputs.  
Select “ADJUST” under “Operat-  
ing the digital audio processor  
(optional)” on page 40.  
Use the “Joystick” to select  
“LISTENING”, then press “ENT”.  
Use the “Joystick” to select the  
mode.  
L-NIGHT  
For powerful sound at low volumes (to  
compensate for high levels of background  
noise such as road noise)  
STANDARD  
For more powerful sound at regular  
volumes  
MAXIMUM  
For the regular sound  
Note: Press “RTN” to return to the previous  
screen.  
51  
ADJUST – Adjusting the speaker level  
DVD  
Video CD  
ADJUST –  
CD  
Adjusting the  
speaker level  
Select “ADJUST” under “Operat-  
ing the digital audio processor  
(optional)” on page 40.  
Press “BAND” for at least 2  
seconds to switch the “ADJUST”  
screen.  
Use the “Joystick” to select  
“TEST TONE”, then press “ENT”.  
Use the “Joystick” to select “ON”,  
then press “ENT”.  
Test tones are produced for two seconds  
from each speaker.  
Note: Test tones are not produced from the center  
and rear speakers when these speakers are  
set to “OFF”.  
52  
MODE – Adjusting the volume, fader and balance  
DVD  
Video CD  
MODE –  
Use the “Joystick” to select the  
speaker, then press “ENT”.  
Adjust so that the volume level from the  
different speakers is the same.  
CD  
Adjusting the volume,  
fader and balance  
When a head unit is connected using Ai-NET  
connections, adjust the volume, fader and  
balance from the head unit.  
Select “MODE” under “Operating  
the digital audio processor  
(optional)” on page 40.  
Use the “Joystick” to select the  
item to be adjusted, then press  
“ENT”.  
Use the “Joystick” to adjust the  
level, then press “ENT”.  
Note: Press “RTN” to return to the previous  
screen.  
Once the levels of  
all the speakers  
have been  
adjusted, either  
set “TEST TONE” to  
Use the “Joystick” to adjust.  
“OFF” or press “A.PROC” to close  
the digital audio processor screen  
and return to the playback screen.  
Note: Press “RTN” to return to the previous  
screen.  
Press “A.PROC”  
to close the  
digital audio  
processor screen  
and return to the play-  
back screen.  
53  
MODE – Adjusting the subwoofer  
DVD  
Video CD  
MODE –  
CD  
Adjusting the  
subwoofer  
Select “MODE” under “Operating  
the digital audio processor  
(optional)” on page 40.  
Use the “Joystick” to select “SUB-  
W”, then press “ENT”.  
Use the “Joystick” to select the  
mode (“ON” or “OFF”), then press  
“ENT”.  
Note: The subwoofer cannot be adjusted when set  
to “OFF”.  
Use the “Joystick” to select the  
level item, then press “ENT”.  
54  
MODE – Turning the defeat function on and off  
DVD  
Video CD  
MODE –  
Turning the defeat  
function on and off  
Use the “Joystick” to adjust the  
level, then press “ENT”.  
CD  
Select “MODE” under “Operating  
the digital audio processor  
(optional)” on page 40.  
Use the “Joystick” to select  
“DEFEAT”, then press “ENT”.  
Note: Press “RTN” to return to the previous  
screen.  
Press “A.PROC”  
to close the  
digital audio  
processor screen  
and return to the play-  
back screen.  
Use the “Joystick” to select the  
mode (“ON” or “OFF”), then press  
“ENT”.  
ON  
:
The response is flat.  
OFF : Off  
Notes:  
• When “DEFEAT” is set to “ON”, the “PARAMET-  
RIC-EQ”, “SURROUND”, “PRIVATE-MEMORY”  
and “TIME-CORRECTION” settings cannot be  
adjusted.  
• Press “RTN” to return to the previous screen.  
Press “A.PROC”  
to close the  
digital audio  
processor screen  
and return to the play-  
back screen.  
55  
Operating from the head unit  
CDA-7865R  
(head unit)  
DVA-5205P  
(player)  
Operating from the head unit  
The DVA-5205P can also be operated from the head unit.  
This section describes operations from the CDA-7865R (the recommended head unit).  
Note that some of the functions cannot be operated from the DVA-5205P.  
Playing DVDs, video CDs and CDs  
Press “SOURCE” and select the  
CD (DVA-5205P) mode.  
The mode switches each time the button  
is pressed.  
The DVA-5205P’s power is on when the  
CD mode is selected, off when other  
modes are selected.  
To set the pause mode, press  
”.  
Press “  
” again to resume playback.  
Note: Playback starts at the beginning of the disc whenever ignition is turned off or another Ai-NET source  
is selected.  
56  
Operating from the head unit  
Displaying the CD title  
Press “TITLE” to display the CD title, etc., on the head unit’s display.  
Press “TITLE” on the head unit.  
The display pattern changes each time  
the button is pressed.  
Notes:  
*1In the TRACK NO./TIME display mode the time display shows 0:00 and does not move.  
*2Displayed during playback of a text compatible CD (when using an optional text compatible). “NO TEXT” will  
be displayed when the CD is not text compatible.  
*3“--------” will be displayed when the title has not been inputted.  
<Functions operable from the CDA-7865R>  
Switch  
Operation  
SOURCE  
Turns the power on and off.  
When pressed again, the source switches.  
The DVD player’s power is on when the CD mode is selected, off when other modes  
are selected.  
TITLE  
RPT  
Switches the display pattern. / Sets the title input mode.  
DVD: Chapter repeat  
Video CD/CD: Switches between track repeat and disc repeat  
Starts playback from the beginning of the following chapter/track.  
When pressed and held in, fast-forwards the disc.  
Starts playback from the beginning of the current chapter/track.  
When pressed and held in, fast-reverses the disc.  
:/  
Switches between play and pause.  
Adjust the volume.  
Rotary Encoder  
Notes:  
• The functions and operations may differ when using with a head unit other than the CDA-7865R.  
• For video CDs with playback control (PBC), turn PBC off.  
• Titles can be input for video CDs and CDs. For details, refer to the operating instructions of the connected  
head unit.  
57  
Operating from the head unit’s remote control unit  
Operating from the head unit’s remote control  
unit  
The DVA-5205P can be operated from the remote control unit included with the head unit.  
Remote control operations  
Remote Control  
RUE-4185  
RUE-4160  
RUE-4167  
unit  
Operation  
P10 Power on/off  
O
O
O
O
O
O
O
O
O
O
O
O
P14 Fast-forward/fast-reverse  
P15 Still picture (pause)  
P14 Chapter/track search  
There may be restrictions to some of the functions and displays depending on the  
Ai-NET compatible product (head unit/remote control unit) being used.  
58  
Operating from the head unit’s remote control unit  
ENT  
ENT  
ENT  
SOURCE  
AUDIO  
SEL  
RUE-4185  
RUE-4160  
RUE-4167  
Operating DVDs, video CDs and CDs  
First see “Remote control operations” (page 58).  
Press “SOURCE” , “AUDIO SEL” or “A. SEL”to set the CD (DVA-5205P)  
mode.  
1
The DVA-5205P’s power is on when the CD mode is selected, off when other modes are  
selected.  
To set the pause mode, press “  
” or “ENT”.  
2
3
Press “  
” or “ENT” again to resume playback.  
Press and hold “ ” or “ ” continuously to make FF or RW operation.  
(RUE-4185, RUE-4160)  
Tilt and hold the joystick in left or right direction to make FF or RW opera-  
tion. (RUE-4167)  
Press “ ” or “ ” to make a track or chapter skip. (RUE-4185, RUE-4160)  
Tilt the joystick in left or right direction to make a track or chapter skip.  
(RUE-4167)  
4
Notes:  
• For adjusting the volume and other basic operations, refer to the head unit’s operating instructions.  
• For video CDs with playback control (PBC), turn PBC off.  
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY  
FROM SAFELY DRIVING YOUR VEHICLE. Any function that requires your  
Warning  
prolonged attention should only be performed after coming to a complete stop.  
Always stop the vehicle in a safe location before performing these functions.  
Failure to do so may result in an accident.  
59  
Terminology  
Terminology  
Dolby Digital  
DTS  
Dolby Digital is a digital audio compres-  
sion technology developed by Dolby  
Laboratories. It is compatible with not  
only stereo (2-channel) sound, but also  
This is a home-use digital sound format of  
the DTS Sound System. This is a high  
quality sound system, developed by  
Digital Theater Systems Corp for use in  
5.1-channel surround sound. The signals movie theaters.  
for the different channels are completely  
independent, so large quantities of audio  
data can be recorded efficiently on discs,  
DTS has six independent sound tracks.  
The theater presentation is fully realized  
in the home and other settings. DTS is  
and since the sound is digital there is little the abbreviation for Digital Theater  
loss of sound quality.  
System.  
* To enjoy DTS surround sound you need  
the separately sold DTS digital audio  
processor. The DVD video software  
must also have a DTS sound track.  
* The separately sold digital audio  
processor (PXA-H510) is required to  
enjoy Dolby Digital sound.  
Dolby Pro Logic  
Dolby Pro Logic is a Dolby Surround  
format encoded onto two channels.  
Proper decoding reproduces four chan-  
nels (front left/right, center and rear  
surround (monaural)) upon playback.  
* The separately sold digital audio  
processor (PXA-H510) is required to  
enjoy Dolby Pro Logic sound.  
Center  
speaker  
Front  
speakers  
Linear PCM audio (LPCM)  
LPCM is a signal recording format used  
for music CDs. Whereas music CDs are  
recorded at 44.1 kHz/16 bits, DVDs are  
recorded at 48 kHz/16 bits to 95 kHz/24  
bits, thereby achieving higher sound  
quality than music CDs.  
Rear  
speakers  
Rating levels (parental lock)  
This is a function of the DVD for restricting  
the viewing age as stipulated by laws in  
different countries. The way in which  
viewing is restricted differs from DVD to  
DVD. Sometimes the DVD cannot be  
played at all, other times certain scenes  
are skipped, and other times certain  
scenes are replaced with other scenes.  
Subwoofer  
Speaker layout for enjoying  
Dolby Digital sound/dts sound  
60  
List of language codes  
List of language codes  
(For details, see page 25.)  
Abbreviation  
AA  
AB  
AF  
Code  
6565  
6566  
6570  
6577  
6582  
6583  
6589  
6590  
6665  
6669  
6671  
6672  
6673  
6678  
6679  
6682  
6765  
6779  
6783  
6789  
6865  
6869  
6890  
6976  
6978  
6979  
6983  
6984  
6985  
7065  
7073  
7074  
7079  
7082  
7089  
7165  
7168  
7176  
7178  
7185  
7265  
7273  
7282  
7285  
Language  
Abbreviation  
HY  
IA  
Code  
7289  
7365  
7369  
7375  
7378  
7383  
7384  
7387  
7465  
7473  
7487  
7565  
7575  
7576  
7577  
7578  
7579  
7583  
7585  
7589  
7665  
7678  
7679  
7684  
7686  
7771  
7773  
7775  
7776  
7778  
7779  
7782  
7783  
7784  
7789  
7865  
7869  
7876  
7879  
7967  
7977  
7982  
8065  
8076  
Language  
Armenian  
Afar  
Abkhazian  
Afrikaans  
Amharic  
Arabic  
Interlingua  
Interlingue  
Inupiak  
IE  
AM  
AR  
AS  
AY  
IK  
IN  
Indonesian  
Icelandic  
Italian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Byelorussian  
Bulgarian  
Bihari  
IS  
IT  
AZ  
IW  
Hebrew  
BA  
BE  
BG  
BH  
BI  
JA  
Japanese  
Yiddish  
JI  
JW  
KA  
KK  
KL  
Javanese  
Georgian  
Kazakh  
Bislama  
Bengali, Bangla  
Tibetan  
Breton  
BN  
BO  
BR  
CA  
CO  
CS  
CY  
DA  
DE  
DZ  
EL  
Greenlandic  
Cambodian  
Kannada  
Korean  
KM  
KN  
KO  
KS  
KU  
KY  
LA  
Catalan  
Corsican  
Czech  
Kashmiri  
Kurdish  
Welsh  
Kirghiz  
Danish  
Latin  
German  
Bhutani  
Greek  
LN  
Lingala  
LO  
LT  
Laotian  
Lithuanian  
Latvian, Lettish  
Malagasy  
Maori  
EN  
EO  
ES  
ET  
English  
Esperanto  
Spanish  
Estonian  
Basque  
Persian  
Finnish  
LV  
MG  
MI  
MK  
ML  
MN  
MO  
MR  
MS  
MT  
MY  
NA  
NE  
NL  
Macedonian  
Malayalam  
Mongolian  
Moldavian  
Marathi  
EU  
FA  
FI  
FJ  
Fiji  
FO  
FR  
FY  
Faroese  
French  
Malay  
Maltese  
Burmese  
Nauru  
Frisian  
GA  
GD  
GL  
GN  
GU  
HA  
HI  
Irish  
Scots Gaelic  
Galician  
Guarani  
Gujarati  
Hausa  
Nepali  
Dutch  
NO  
OC  
OM  
OR  
PA  
Norwegian  
Occitan  
(Afan) Oromo  
Oriya  
Hindi  
HR  
HU  
Croatian  
Hungarian  
Punjabi  
PL  
Polish  
61  
List of language codes  
List of language codes (Continued)  
(For details, see page 25.)  
Abbreviation  
PS  
Code  
8083  
8084  
8185  
8277  
8278  
8279  
8285  
8287  
8365  
8368  
8371  
8372  
8373  
8375  
8376  
8377  
8378  
8379  
8381  
8382  
8383  
8384  
8385  
8386  
Language  
Pashto, Pushto  
Abbreviation  
SW  
TA  
Code  
8387  
8465  
8469  
8471  
8472  
8473  
8475  
8476  
8478  
8479  
8482  
8483  
8484  
8487  
8575  
8582  
8590  
8673  
8679  
8779  
8872  
8979  
9072  
9085  
Language  
Swahili  
Tamil  
PT  
Portuguese  
Quechua  
Rhaeto-Romance  
Kirundi  
QU  
RM  
RN  
RO  
RU  
TE  
Telugu  
Tajik  
TG  
TH  
Thai  
Romanian  
Russian  
TI  
Tigrinya  
Turkmen  
Tagalog  
TK  
RW  
SA  
Kinyarwanda  
Sanskrit  
TL  
TN  
Setswana  
Tongan  
Turkish  
Tsonga  
Tatar  
SD  
Sindhi  
TO  
SG  
SH  
Sangho  
TR  
Serbo-Croatian  
Singhalese  
Slovak  
TS  
SI  
TT  
SK  
TW  
UK  
UR  
UZ  
Twi  
SL  
Slovenian  
Samoan  
Ukrainian  
Urdu  
SM  
SN  
Shona  
Uzbek  
Vietnamese  
Volapuk  
Wolof  
SO  
SQ  
SR  
Somali  
VI  
Albanian  
Serbian  
VO  
WO  
XH  
YO  
SS  
Siswati  
Xhosa  
Yoruba  
Chinese  
Zulu  
ST  
Sesotho  
SU  
Sundanese  
Swedish  
ZH  
SV  
ZU  
62  
List of country codes  
List of country codes  
(For details, see page 27.)  
Abbreviation  
AD  
AE  
AF  
Code  
6568  
6569  
6570  
6571  
6573  
6576  
6577  
6578  
6579  
6581  
6582  
6583  
6584  
6585  
6587  
6590  
6665  
6666  
6668  
6669  
6670  
6671  
6672  
6673  
6674  
6677  
6678  
6679  
6682  
6683  
6684  
6686  
6687  
6689  
6690  
6765  
6767  
6768  
Country  
Abbreviation  
CL  
Code  
6776  
6777  
6778  
6779  
6782  
6785  
6786  
6788  
6789  
6790  
6869  
6874  
6875  
6877  
6879  
6890  
6967  
6969  
6971  
6972  
6982  
6983  
6984  
7073  
7074  
7075  
7077  
Country  
Andorra  
Chile  
United Arab Emirates  
Afghanistan  
Antigua and Barbuda  
Anguilla  
CM  
CN  
CO  
CR  
CU  
CV  
Cameroon  
China  
AG  
AI  
Colombia  
Costa Rica  
Cuba  
AL  
Albania  
AM  
AN  
AO  
AQ  
AR  
AS  
AT  
Armenia  
Cape Verde  
Christmas Island  
Cyprus  
Netherlands Antilles  
Angola  
CX  
CY  
Antarctica  
CZ  
Czech Rempublic  
Germany  
Djibouti  
Argentina  
DE  
American Samoa  
Austria  
DJ  
DK  
Denmark  
Dominica  
Dominican Republic  
Algeria  
AU  
AW  
AZ  
Australia  
DM  
DO  
DZ  
Aruba  
Azerbaijan  
Bosnia and Herzegovina  
Barbados  
BA  
BB  
BD  
BE  
BF  
EC  
Ecuador  
EE  
Estonia  
Bangladesh  
Belgium  
EG  
EH  
Egypt  
Western Sahara  
Eritrea  
Burkina Faso  
Bulgaria  
ER  
BG  
BH  
BI  
ES  
Spain  
Bahrain  
ET  
Ethiopia  
Burundi  
FI  
Finland  
BJ  
Benin  
FJ  
Fiji  
BM  
BN  
BO  
BR  
BS  
BT  
Bermuda  
FK  
Falkland Islands  
Brunei Darussalam  
Bolivia  
FM  
Micronesia, Federated  
States of  
FO  
FR  
GA  
GB  
GD  
GE  
GF  
GH  
GI  
7079  
7082  
7165  
7166  
7168  
7169  
7170  
7172  
7173  
7176  
7177  
7178  
7180  
7181  
7182  
Faroe Islands  
France  
Brazil  
Bahamas  
Gabon  
Bhutan  
United Kingdom  
Grenada  
BV  
BW  
BY  
BZ  
Bouvet Island  
Botswana  
Georgia  
Belarus  
French Guiana  
Ghana  
Belize  
CA  
CC  
CD  
Canada  
Gibraltar  
Cocos (Keeling) Islands  
GL  
GM  
GN  
GP  
GQ  
GR  
Greenland  
Gambia  
Congo, the Democratic  
Republic of the  
CF  
CG  
CH  
CI  
6770  
6771  
6772  
6773  
6775  
Central African Republic  
Congo  
Guinea  
Guadeloupe  
Equatorial Guinea  
Greece  
Switzerland  
Cote d’lvoire  
Cook Islands  
CK  
63  
List of country codes  
List of country codes (Continued)  
(For details, see page 27.)  
Abbreviation  
Code  
Country  
Abbreviation  
Code  
7683  
7684  
7685  
7686  
7689  
7765  
7767  
7768  
7771  
7772  
7775  
Country  
GS  
7183  
South Georgia and the  
South Sandwich Islands  
LS  
LT  
Lesotho  
Lithuania  
GT  
GU  
GW  
GY  
HK  
7184  
7185  
7187  
7189  
7275  
7277  
Guatemala  
Guam  
LU  
LV  
Luxembourg  
Latvia  
Guinea-Bissau  
Guyana  
LY  
Libyan Arab Jamahiriya  
Morocco  
MA  
MC  
MD  
MG  
MH  
MK  
Hong Kong  
Monaco  
HM  
Heard Island and  
McDonald Islands  
Moldova, Republic of  
Madagascar  
Marshall Islands  
HN  
HR  
HT  
HU  
ID  
7278  
7282  
7284  
7285  
7368  
7369  
7376  
7378  
7379  
Honduras  
Croatia  
Haiti  
Macedonia, The former  
Yugoslav Republic of  
Hungary  
Indonesia  
Ireland  
Israel  
ML  
MM  
MN  
MO  
MP  
MQ  
MR  
MS  
MT  
MU  
MV  
MW  
MX  
MY  
MZ  
NA  
NC  
NE  
NF  
NG  
NI  
7776  
7777  
7778  
7779  
7780  
7781  
7782  
7783  
7784  
7785  
7786  
7787  
7788  
7789  
7790  
7865  
7867  
7869  
7870  
7871  
7873  
7876  
7879  
7880  
7882  
7885  
7890  
7977  
8065  
8069  
8070  
8071  
Mali  
Myanmar  
Mongolia  
Macau  
IE  
IL  
IN  
India  
Northern Mariana Islands  
Martinique  
Mauritania  
Montserrat  
Malta  
IO  
British Indian Ocean  
Territory  
IQ  
IR  
7381  
7382  
7383  
7384  
7477  
7479  
7480  
7569  
7571  
7572  
7573  
7577  
7578  
7580  
Iraq  
Iran, Islamic Republic of  
Iceland  
IS  
Mauritius  
Maldives  
IT  
Italy  
JM  
JO  
JP  
KE  
KG  
KH  
KI  
Jamaica  
Malawi  
Jordan  
Mexico  
Japan  
Malaysia  
Kenya  
Mozambique  
Namibia  
Kyrgyzstan  
Cambodia  
Kiribati  
New Caledonia  
Niger  
KM  
KN  
KP  
Comoros  
Saint Kitts and Nevis  
Norfolk Island  
Nigeria  
Korea, Democratic  
People’s Republic of  
Nicaragua  
Netherlands  
Norway  
NL  
KR  
KW  
KY  
KZ  
LA  
7582  
7587  
7589  
7590  
7665  
Korea, Republic of  
Kuwait  
NO  
NP  
NR  
NU  
NZ  
OM  
PA  
Nepal  
Cayman Islands  
Kazakstan  
Nauru  
Niue  
Lao People’s Democratic  
Republic  
New Zealand  
Oman  
LB  
LC  
LI  
7666  
7667  
7673  
7675  
7682  
Lebanon  
Saint Lucia  
Liechtenstein  
Sri Lanka  
Liberia  
Panama  
PE  
PF  
Peru  
LK  
LR  
French Polynesia  
Papua New Guinea  
PG  
64  
List of country codes  
List of country codes (Continued)  
(For details, see page 27.)  
Abbreviation  
Code  
8072  
8075  
8076  
8077  
8078  
8082  
8084  
8087  
8089  
8165  
8269  
8279  
8285  
8287  
8365  
8366  
8367  
8368  
8369  
8371  
8372  
8373  
8374  
8375  
8376  
8377  
8378  
8379  
8382  
8384  
8386  
8389  
8390  
8467  
8468  
8470  
8471  
8472  
Country  
Philippines  
Abbreviation  
Code  
8474  
8475  
8477  
8478  
8479  
8480  
8482  
8484  
8486  
8487  
8490  
Country  
PH  
PK  
PL  
TJ  
TK  
TM  
TN  
TO  
TP  
TR  
TT  
TV  
TW  
TZ  
Tajikistan  
Tokelau  
Pakistan  
Poland  
Turkmenistan  
Tunisia  
PM  
PN  
PR  
PT  
PW  
PY  
QA  
RE  
RO  
RU  
RW  
SA  
SB  
SC  
SD  
SE  
SG  
SH  
SI  
Saint Pierre and Miquelon  
Pitcairn  
Tonga  
Puerto Rico  
Portugal  
East Timor  
Turkey  
Palau  
Trinidad and Tobago  
Tuvalu  
Paraguay  
Qatar  
Taiwan, Province of China  
Reunion  
Tanzania, United Republic  
of  
Romania  
UA  
UG  
UM  
8565  
8571  
8577  
Ukraine  
Uganda  
Russian Federation  
Rwanda  
United States Minor  
Outlying Islands  
Saudi Arabia  
Solomon Islands  
Seychelles  
US  
UY  
UZ  
VA  
8583  
8589  
8590  
8665  
United States  
Uruguay  
Sudan  
Uzbekistan  
Sweden  
Holy See (Vatican City  
State)  
Singapore  
Saint Helena  
Slovenia  
VC  
8667  
Saint Vincent and the  
Grenadines  
VE  
VG  
VI  
8669  
8671  
8673  
8678  
8685  
8770  
8783  
8969  
8984  
8985  
9065  
9077  
9087  
Venezuela  
Virgin Island, British  
Virgin Islands, U.S  
Viet Nam  
SJ  
Svalbard and Jan Mayen  
Slovakia  
SK  
SL  
Sierra Leone  
San Marino  
Senegal  
VN  
VU  
WF  
WS  
YE  
YT  
YU  
ZA  
ZM  
ZW  
SM  
SN  
SO  
SR  
ST  
SV  
SY  
SZ  
TC  
TD  
TF  
Vanuatu  
Wallis and Futuna  
Samoa  
Somalia  
Suriname  
Yemen  
Sao Tome and Principe  
El Salvador  
Syrian Arab Republic  
Swaziland  
Mayotte  
Yugoslavia  
South Africa  
Zambia  
Turks and Caicos Islands  
Chad  
Zimbabwe  
French Southern Territories  
Togo  
TG  
TH  
Thailand  
65  
In case of difficulty  
• If operation freezes, the screen goes black or the unit should otherwise not function properly, try turning  
the power off then back on. Alternatively, try the following methods in the order listed until the DVA-5205P  
returns to normal playbak mode:  
1) Change the source from DVD to another source then return to DVD mode.  
2) Turn the car’s ignition OFF and back ON again.  
3) Press the RESET button on the face of the DVA-5205P.  
• This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your  
system is properly connected or consult your authorized Alpine dealer.  
Symptom  
Cause  
Remedy  
Unit does not  
operate.  
Fuse is blown.  
Replace with a fuse of the specified capacity. (See  
installation instructions.)  
Monitor’s power is not turned on. Turn on the monitor’s power.  
Condensation.  
Wait a while (about 1 hour) for the condensation to  
dry.  
Operation is  
unstable.  
Remote control unit’s batteries  
are worn.  
Replace the remote control unit’s batteries with new  
ones.  
Remote control sensor or  
transmitter is dirty.  
Clean the sensor or transmitter.  
No picture is  
produced.  
Monitor’s mode is not switched  
to the mode you want to see.  
Switch to the mode you want to see.  
Monitor’s parking brake cord is  
not connected.  
Connect the monitor’s parking brake cord and set the  
parking brake.  
(For details, refer to the monitor’s instructions.)  
Monitor’s parking brake is not  
set.  
Playback does not Disc is loaded upside-down.  
start.  
Check the disc and load it with the labeled side facing  
upward.  
Disc is dirty.  
Clean the disc.  
A disc not able to playback with Check if the disc is able to be played back.  
this unit is loaded.  
Parental lock is set.  
Cancel the parental lock or change the rating level.  
Press “SET” to turn the menu off.  
Setup menu is displayed.  
Picture is unclear  
or noisy.  
Disc is being fast-forwarded or  
fast-reversed.  
The picture may be slightly disturbed, but this is  
normal.  
Vehicle’s battery power is weak. Check the battery power and wiring.  
(The unit may malfunction if the battery power is  
under 11 volts with a load applied.)  
Monitor’s fluorescent tube is  
worn.  
Replace the monitor’s fluorescent tube.  
Disc is scratched.  
Replaced with a non-scratched disc.  
Image stops  
sometimes.  
No disc is loaded.  
Disc is dirty.  
Load a disc.  
NO DISC  
Clean the disc.  
Remote control operation is not For some discs or playing modes, certain operations  
NOT VALID  
possible.  
are not possible. This is not a malfunction.  
REGIONAL CODE Disc does not match regional  
VIOLATION  
Load a disc that matches the regional code number.  
code number.  
NTSC disc is loaded.  
Load a PAL disc.  
VIDEO SIGNAL  
SYSTEM IS NOT  
CORRECT  
Protective circuit is activated to  
high temperature.  
Turn the power (main unit power when not connected)  
OFF on the connected head unit and then turn the  
power ON again. If the display still does not  
HI-TEMP  
disappear, leave the power OFF until the temperature  
decreases and then turn the power ON again.  
66  
Specifications  
Signal system.................................... NTSC/PAL  
Horizontal resolution ......................... 500 lines or greater  
Video output level.............................. 1Vp-p (75 ohms)  
Video S/N ratio .................................. DVD: 60 dB  
Audio S/N ratio .................................. DVD: 95 dB  
CD: 93 dB  
Frequency response ......................... DVD: 5 Hz to 22 kHz (±1 dB) (48 kHz sampling)  
DVD: 5 Hz to 44 kHz (±1 dB) (96 kHz sampling)  
CD: 5 Hz to 20 kHz (±1 dB)  
Dynamic range .................................. DVD: 90 dB or greater  
CD: 93 dB or greater  
Wow & flutter ..................................... Below measurable limit  
Channel separation ........................... 80 dB  
Harmonic distortion ........................... 0.03%  
Audio output ...................................... 800 mV  
Power supply .................................... DC 14.4V (operating range: 11 to 16V)  
Operating temperature range ............ –10° to +60°C  
Weight ............................................... 1.6 kg (3 lbs. 8 oz)  
External dimensions (W x H x D) ...... 178 x 50 x 185 mm (7” x 2” x 7-1/4”)  
For improvement purposes, specifications and design are subject to change without  
notice.  
The illustrations in this manual may appear different from the actual product due to  
printing conditions.  
67  
Functions of remote control unit buttons  
Operating the DVA-5205P DVD Video Player  
When operating the DVA-5205P set the DVD/AUDIO switch to the “DVD” side.  
Joy Stick (P13, 21, 24, 25, 26, 29,  
30, 32, 34, 35, 36, 38, 40, 41, 42, 43,  
44, 45, 46, 47, 48, 49, 50, 51, 52, 53,  
54, 55)  
1
Selects the items displayed on the  
screen.  
1
ENT button (P13, 17, 19, 21, 24,  
25, 26, 27, 28, 29, 30, 32, 34, 35, 36,  
38, 40, 41, 42, 43, 44, 45, 46, 47, 48,  
49, 50, 51, 52, 53, 54, 55)  
2
ENT  
q
2
3
Determines the selected item.  
Rotary Encoder (P11)  
Adjusts the volume when only the  
Digital Audio Processor is connected.  
3
4
w
e
4
5
MENU button (P12, 13, 17, 18, 19,  
A. PROC DEFEAT MUTE  
21)  
Displays the DVD menu.  
6
7
r
SET button (P24, 25, 27, 29, 31,  
DISP.  
RPT  
TUNER DISC  
CHG  
33, 35, 37, 39)  
Press and hold for 2 seconds to  
summon the SET UP (initial setting)  
screen.  
8
9
p
t
y
V. SEL  
POWER  
NTSC/PAL  
A. PROC  
BAND  
: Button (P12, 13, 14, 15, 21)  
Playback.  
5
SLOW Button (P15)  
Press and hold for 2 seconds for slow  
motion playback.  
.;; Button (P14)  
Seeks the start for video and audio  
data.  
6
7
8
1
2
3
u
i
a
s
SUB T. ON/OFF AUDIO  
Press and hold for 2 seconds for  
Rewind of video and audio data.  
4
7
5
ANGLE  
6
9
::. Button (P14)  
Seeks the start for video and audio  
data.  
o
;
8
OP/  
DN  
CLR  
UP  
+10  
CL 0  
Press and hold for 2 seconds for Fast  
Forward of video and audio data.  
DISP. Button (P21, 22)  
Displays the playback state on the  
screen.  
68  
Functions of remote control unit buttons  
RPT Button (P19)  
Repeat playback.  
SUB T. Button (P20)  
Press and hold for 2 seconds to  
change the subtitles.  
9
p
u
i
o
;
POWER Button (P10)  
Turns the power ON and OFF.  
NTSC/PAL Button (P11)  
Press and hold for 5 seconds to  
change between NTSC and PAL.  
–ON/OFF Button (P21)  
Press and hold for 2 seconds to turn  
the subtitles ON and OFF.  
ANGLE Button (P20)  
Press and hold for 2 seconds to  
change the angle.  
DVD/AUDIO Switch (P8)  
Used to switch between DVD and  
Audio operation.  
q
w
CLR Button (P16, 17, 18, 27)  
Remove numbers (one character at a  
time) that have been selected and  
input.  
Press and hold for 2 seconds. All the  
characters which were selected and  
input are erased.  
GO TO Button (P16, 17, 18)  
Used to go directly to start of selec-  
tion.  
TITLE Button (P12, 21)  
Press and hold for 2 seconds to  
display the Title Menu.  
AUDIO Button (P19)  
Press and hold for 2 seconds to  
change the audio output.  
a
s
RTN Button (P16, 17, 18, 25, 27,  
29, 31, 33, 35, 37, 39, 41, 43, 44, 45,  
46, 47, 49, 50, 51, 53, 55)  
e
10-Key Pad (P11, 13, 16, 17, 18,  
Used to return the selection screen  
just prior to the present screen.  
21, 25, 27, 28)  
Used to input numbers.  
V.OUT Button (P23)  
Used to switch between Video and  
Audio output to the rear monitor.  
.. / ..: Button (P15)  
Used for Pause and Frame-by-Frame  
playback.  
r
Note: Operation may not be accepted depending  
on the type of disc and the playback  
conditions. At such a time the following  
mark is displayed on the screen:  
Button (P13)  
Used to stop playback.  
t
y
A.PROC Button (P40, 41, 43, 44,  
45, 47, 49, 50, 51, 53, 55)  
Used to summon the processor  
control screen when connected with  
the Digital Audio Processor.  
BAND Button (P41, 52)  
Press and hold for 2 seconds to switch  
the menu screen when controlling the  
Digital Audio Processor.  
69  
Functions of remote control unit buttons  
Operating audio for the Alpine Ai-NET  
When operating audio for the Alpine Ai-NET, set the DVD/AUDIO switch to the “AUDIO” side.  
Joy Stick  
1
Music Sensor/Fast Forward/Rewind/  
Disc Change/Preset Selection/SEEK  
D
L
ENT Button  
2
3
4
5
6
7
8
9
p
q
1
Play/Pause  
Rotary Encoder  
Volume adjustment  
DISP Button  
ENT  
q
2
3
Spectrum Analyzer display ON/OFF  
SOURCE Button  
MENU  
Source switching  
w
e
4
5
A.PROC Button  
Audio Processor Switch  
DEFEAT Button  
A. PROC DEFEAT MUTE  
Defeat Mode ON/OFF.  
TUNER Button  
6
7
r
DISP.  
RPT  
TUNER DISC  
CHG  
Switches to Radio Mode.  
DISC Button  
8
9
p
t
y
Slave CD/MD mode switching.  
Power Button  
V. SEL  
POWER  
NTSC/PAL  
A. PROC  
BAND  
Power ON/OFF switching.  
DVD/AUDIO Switch  
Switching between DVD and Audio  
operation.  
LIST Button  
w
Changes the title list display.  
Press and hold for 2 seconds to switch  
to title input screen.  
BAND Button  
e
r
t
y
Radio Band switching  
MUTE Button  
Mute  
CHG Button  
Switches to CHANGE Mode.  
V.SEL Button  
V.SEL Switching  
Note: Some controls may not be possible  
depending on the audio device being used.  
70  
Memo  
71  
R
SERIAL NUMBER/NUMERO DE SERIE/NUMERO DE SERIE:  
INSTALLATION DATE/DATE D’INSTALLATION/FECHA DE INSTALACION:  
INSTALLATION TECHNICIAN/INSTALLATEUR/INSTALADOR:  
PLACE OF PURCHASELIEU D’ACHAT/LUGAR DE ADQUISICION:  
Alp ine Ele c tronic s, Inc .  
Tokyo office: 1-1-8 Nishi Gotanda,  
Shinagawa-ku, Tokyo 141-8501, Japan  
Tel.: (03) 3494-1101  
Alp ine Ele c tronic s of Am e ric a , Inc .  
19145 Gramercy Place, Torrance,  
California 90501, U.S.A.  
Tel.: 1-800-ALPINE-1 (1-800-257-4631)  
Alp ine Ele c tronic s of Ca na d a , Inc .  
Suite 203, 7300 Warden Ave. Markham,  
Ontario L3R 9Z6, Canada  
Tel.: 1-800-ALPINE-1 (1-800-257-4631)  
Alp ine Ele c tronic s of Austra lia Pty. Ltd .  
6-8 Fiveways Boulevarde Keysborough,  
Victoria 3173, Australia  
Tel.: (03) 9769-0000  
Alp ine Ele c tronic s Gm b H  
Kreuzerkamp 7-11 40878 Ratingen,  
Germany  
Tel.: 02102-45 50  
Alp ine Ita lia S.p .A.  
Via C. Colombo 8, 20090 Trezzano Sul  
Naviglio MI, Italy  
Tel.: 02-48 47 81  
Alp ine Ele c tronic s Fra nc e S.A.R.L.  
(RCS PONTOISE B 338 101 280)  
98, Rue De La Belle Etoile, Z.I. Paris Nord II  
B.P. 50016 F-95945, Roissy,  
Charles de Gaulle Cedex, France  
Tel.: 01-48 63 89 89  
Alp ine Ele c tronic s of U. K., Ltd .  
13 Tanners Drive, Blakelands,  
Milton Keynes MK14 5BU, U.K.  
Tel.: 01908-61 15 56  
ALPINE ELECTRONICS DE ESPAÑA, S.A.  
Portal De Gamarra 36, Pabellón 32  
01013 Vitoria (Alava) - Apdo. 133, Spain  
Tel.: 34-45-283588  
Designed by ALPINE Japan  
Printed in Japan (S)  
Sankei Kikaku Co., Ltd.  
68P30540Y28-O  
1-13-38, Hinodai,  
Hino, Tokyo, Japan  

Blaupunkt Mnchen RDM 169 User Manual
Bryan Boilers AB120 W FDGO User Manual
Bushnell 11 8322G User Manual
Bushnell Binoculars 11 1210 User Manual
Dual ILLUMINITE TS69 User Manual
Emerson Process Management ES58 User Manual
FujiFilm FinePix Z85 User Manual
GE FCM9 User Manual
Gefen EXT DPSB 50 User Manual
Hamilton Beach Single Serve Blender User Manual