Aiphone Caller ID Box AI CP170 User Manual

Interface Board for Non-Aiphone Speaker and Call Button with AI-900 System  
- INSTRUCTIONS -  
The AI-CP170 Interface board provides the necessary interface for any standard speaker with a 25V transformer and a  
Normally Open call button to be used as a remote station on the AI-900 system. Simple wire connections are provided  
for easy connection. Install the small circuit board behind the remote speaker or call button. Made for indoor use only.  
WIRING DIAGRAM:  
* 8 Speaker with  
25V Transformer  
Connector on  
AI-900RS Card  
Gray to  
Blk  
Common of  
Transformer  
Brn  
Gray  
Org  
*Top view of  
connector  
Brown  
Orange  
Violet  
Red  
Red to  
1W Tap on  
Transformer  
Black  
Violet  
*Important, When connector  
is plugged into AI-900RS,  
Orange should be on top  
Red & Gray wires to Speaker  
Violet wires to call button  
Normally Open  
Call Button  
* For best acoustics, speaker must be located in the center of the room, mounted in the ceiling  
SPECIFICATIONS:  
Power Source:  
Speaker:  
Call Button:  
Mounting:  
Supplied by Main Frame (AI-900MF)  
Use standard 8 ohm speaker with 25V transformer  
Normally open momentary contact  
Conceal behind speaker or call button  
Terminations:  
Wiring:  
Wiring Distance:  
Color-coded prewired pigtails  
3 conductor shielded, homerun from Main Frame to each speaker/call button  
2,625' w/ 22AWG, 4,265' w/ 18AWG  
Dimensions (HxWxD): 1-3/8" x 15/16" x 1/2"  
Aiphone Communication Systems  
1700 130th Ave. N.E.  
Bellevue, WA 98005  
(425) 455-0510  
FAX (425) 455-0071  
TOLL FREE TECHNICAL SUPPORT: (800) 692-0200  
AI-CP170 Instr.  
0309PHJS  

AMS 1084 User Manual
Blaupunkt FREIBURG KINGSTON DJ User Manual
Directed Electronics Orion Cobalt CO552 User Manual
Dual XPE1700 User Manual
Electrolux SMOOTH GLIDE E24WC75HSS User Manual
Elmo Cable Box CBL MTRENC4 User Manual
Focal Polyglass 6 V 30 User Manual
Hyundai H CDM8039 User Manual
Infinity DMC 1000 User Manual
Jensen Car Speaker JRX650 User Manual