Acer TCO03 User Manual

Table of Contents  
TCO03 Notice............................................................................................................................................................  
FCC Statement Warning............................................................................................................................................  
Canadian DOC Notice...............................................................................................................................................  
Precautions................................................................................................................................................................  
Package Contents......................................................................................................................................................  
Installation Instructions..............................................................................................................................................  
Assembling the Monitor...................................................................................................................................  
Detaching the Monitor .....................................................................................................................................  
Adjusting the Viewing Angle ...........................................................................................................................  
Connecting the Devices ..................................................................................................................................  
Switching the Power .......................................................................................................................................  
Adjusting Display Settings .........................................................................................................................................  
External Controls ............................................................................................................................................  
OSD Options .............................................................................................................................................................  
OSD Menu ................................................................................................................................................................  
Brightness & Contrast ...............................................................................................................................................  
Tracking ..........................................................................................................................................................  
Position ...........................................................................................................................................................  
Color ...............................................................................................................................................................  
Language Setting.............................................................................................................................................  
OSD Option.......................................................................................................................................................  
Autoconfiguration.............................................................................................................................................  
Information ....................................................................................................................................................  
Recall...............................................................................................................................................................  
General Specifications...............................................................................................................................................  
Technical Information.................................................................................................................................................  
1
2
3
3
4
4
4
4
4
4
5
5
5
5
6
6
6
6
6
7
7
7
7
7
8
8
Pin Assignment ................................................................................................................................................. 9  
Standard Timing Table........................................................................................................................................10  
Troubleshooting................................................................................................................................................  
11  
IT Equipment Recycling Information  
IT Equipment Recycling Information:  
Acer is strongly committed to environmental protection and views recycling, in the form  
of salvaging and disposal, of used equipment as one of the company’s top priorities in  
minimizing the burden placed on the environment.  
We at Acer are very conscious of the environmental forces that impose on our business  
and strive to identify and provide the best working products to reduce the environmental  
impact of our products.  
For more information and help in recycling, please visit the following websites:  
Worldwide:  
Visit www.global.acer.com for further information on our other products and its features  
and benefits.  
Lamp Disposal  
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF  
ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE INFORMATION, CONTACT THE  
ELECTRONIC INDUSTRIES ALLIANCE AT WWW. EIAE. ORG. FOR LAMP SPECIFIC DISPOSAL  
INFORMATION CHECK WWW. LAMPRECYCLE. ORG.  
Waste Electrical and Electronic Equipment (WEEE) Directive  
Do not throw this electronic device into the municipal trash bin when discarding. To  
minimize pollution and ensure utmost protection of the global environment, please recycle  
it. For more information about the collection of WEEE welcome to visit our homepage at  
www.acer.com under environment.  
2
NOTE  
A shielded-type signal cord is required in order to meet the FCC emission limits and also to prevent interference to  
the radio and television reception. It is essential that only the supplied signal cord be used.  
Canadian DOC Notice  
This Class B digital apparatus meets all requirements of the Canadian Interference-  
Causing Equipment Regulations.  
Cet appareil numerique de la classe B repecte toutes les exigences du Reglement  
sur le materiel brouilleur du Canada.  
Preface  
This manual is designed to assist users in setting up and using the LCD Monitor. Information in his document has  
been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The  
information in this document is subject to change without notice. This document contains proprietary information  
protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical,  
electronic or other means, in any form, without prior written permission of the manufacturer.  
Important Safety Instructions  
1. To clean LCD Monitor screen;Power off LCD Monitor and unplug the AC Cord.  
Spray a non-solvent cleaning solution onto a rag and clean the screen gently.  
2. Do not place the LCD Monitor near a window. Exposing the monitor to rain  
water, moisture or sunlight can severely damage it. ter, moisture or sunlight can  
severely damage it.  
3. Do not apply pressure to the LCD screen.  
Excess pressure  
may cause permanent damage to the display.  
4. Do not remove the cover or attempt to service this unit by yourself. Servicing of any  
nature should be performed by an authorized technician.  
5. Operate LCD Monitor in a room with a room temperature of 5°C ~ 40°C (or 41°F ~  
104°F).Operating the LCD Monitor outside this range could result in permanent damage.  
6. If any of the following occurs, immediately unplug your monitor and call an authorized  
technician.  
* Monitor to PC signal cable is frayed or damaged.  
* Liquid spilled into LCD Monitor or the monitor has been exposed to rain.  
* LCD Monitor or the case is damaged.  
3
Package Contents  
LCD Monitor  
Power Cord  
VGA cable  
User manual (CD)  
Quick start Guide  
Assembling the Monitor  
1. Position the monitor on top of the stand.  
2.Connect the stand into the neck of monitor along the track.  
Detaching the Monitor  
Important  
First, find a clean, flat surface to place the monitor after removing it from the stand. Place a clean dry cloth under the  
monitor to protect it further. Pull the monitor slightly up and away from the stand.  
Adjusting the Viewing Angle  
The viewing angle of the monitor ranges from forward to backward 15°.  
Caution:  
Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting this will result in  
damaging the Monitor and Monitor stand.  
Connecting the Devices  
Please shut down the power of computer and monitor  
before you do the connection.  
Attach the monitor to the power cord which should then be  
inserted into a properly grounded electric socket.  
(1)  
Power Cord  
Connect the signal cable to the VGA output socket of the graphics card  
on the computer. Then tighten the thumbscrews on the connector  
(
VGA Cable  
2)  
WARNING: The D-Sub 15 pin plug of the VGA cable is trapezoid in shape. Make sure the shape of the plug matches  
the shape of the socket it is inserted into, and that none of the pins are bent or otherwise damaged.  
Operating Your Monitor  
First, switch the power on to the monitor, then switch the power on to the computer. When you see the LED on  
the power button go green, this indicates the computer is ready for use. Allow about 10 seconds for the video  
signal to appear. If you do not see the green light on the power button or a video signal, check the connections .  
If OSD is active, press to exit. If OSD is inactive, press and the  
monitor will automatically optimize the display position, clock and  
phase of your display.  
1
AUTO  
2
If OSD is active, press to select or adjust OSD options.  
If OSD is active, press to select or adjust OSD options.  
Press to view OSD. Press again to exit.  
4
MENU  
OSD Menu  
Power on/off  
Green: power on  
Orange: in sleep mode  
OSD Options  
Please refer to "External Controls " on Page 5. To adjust the OSD settings :  
1. Press the MENU button to open the OSD menu.  
2. Use the buttons marked < or >, to highlight a control, then press the MENU button to enter  
3. Use the buttons marked < or >, to adjust the control to the desired level.  
4. When you have finished making all selections, press the MENU button to exit the OSD. (Or the adjustment  
will auto-save after 45 seconds.)  
OSD Menu  
Brightness & Contrast  
BRIGHTNESS:  
This adjusts the brightness of the picture on the screen.Adjustable range  
from the value of 0 to 100.  
CONTRAST:  
This adjusts dark and light shades of color relative to each other to achieve  
a comfortable contrast. Adjustable range from the value of 0 to 100.  
Tracking  
FOCUS:  
This removes any horizontal distortion and makes the picture clear and sharp.  
CLOCK:  
If there are any vertical stripes seen on the background of the screen this renders  
them less noticeable by minimizing their size. It also changes the size of horizontal  
screen.  
Position  
V-Position:  
This removes any horizontal distortion and makes the picture clear and sharp.  
H-Position:  
This adjusts the horizontal.  
Color Temperature  
There are three ways of adjusting color temperature:  
WARM:  
Set the color temperature as CIE coordinate 6500°K.  
COOL:  
Set the color temperature as CIE coordinate 9300°K.  
User defined:  
You can adjust the colors red, green and blue to the intensity you  
desire.  
Language  
Select the OSD menu language.  
OSD Position  
This changes the position of the OSD window on the screen.  
TIMEOUT function allow user define the OSD appearing period from 10 seconds to  
120 seconds.  
AUTO Configuration  
Adjust the monitor parameter automatically.  
Source Change  
Analog and Digital source change .(option)  
Information  
This shows brief information on the screen.  
Recall  
Recall to factory default settings  
General Specification  
Item  
Specification  
15-inch Flat panel active-matrix TFT LCD  
1024 x 768 @75Hz  
0.297 mm X 0.297 mm  
16.2M  
Display  
Max resolution  
Pixel Pitch  
Color  
Brightness  
Contrast Ratio  
250nits ( Typical)  
450:1 (Typical)  
Response Time  
16ms (Typical)  
120°  
View Angle of Horizontal  
View Angle of Vertical  
External Controls Power Button  
Control Buttons  
100°  
ON/ OFF  
AUTO, MENU, <, >  
VGA  
Video In  
Video  
Analog 0.7V  
Sync  
TTL (+/ -)  
DDC2B  
Plug & Play  
Power Source  
100-240V AC, 50/60 Hz, 1.5A  
Power consumption during  
normal operation  
< 25W  
Power consumption during  
active off operation  
< 1W  
Dimension (W_H_D)  
Weight (Net/ Gross)  
341x356.4x167.6mm (base included)  
2.6Kg/ 4.1Kg  
8
Technical Information  
Pin Assignment  
Signal  
Signal  
PIN  
1
Description  
Red  
PIN  
9
Description  
+5V  
2
Green  
10  
11  
12  
13  
14  
15  
N.C.  
3
Blue  
N.C.  
4
N.C.  
DDC_SDA  
HSYNC  
VSYNC.  
DDC_SCL  
5
GND  
6
Red_GND  
Green_GND  
Blue_GND  
7
8
9
Standard Timing Table  
If the selected timing is NO T included in table below, this LCD monitor will go into the sleep mode.  
VESA MODES  
Horizontal  
Vertical  
Mode  
Resolution  
Total  
Nominal  
Frequency  
+/-0.5KHz  
Sync  
Polarity  
Nominal  
Frequency  
+/-1Hz  
Sync  
Polarity  
Nominal  
Pixel  
Clock  
(MHz)  
640*480@60Hz  
640*480@72Hz  
640*480@75Hz  
800*600@56Hz  
800*600@60Hz  
800*600@72Hz  
800*600@75Hz  
1024*768@60Hz  
1024*768@70Hz  
1024*768@75Hz  
800*525  
31.469  
N
N
N
P
P
P
P
N
N
P
59.940  
72.809  
75.000  
56.250  
60.317  
72.188  
75.000  
60.004  
70.069  
75.029  
N
N
N
P
P
P
P
N
N
P
25.175  
VGA  
832*520  
37.861  
31.500  
31.500  
36.000  
40.000  
50.000  
49.500  
65.000  
75.000  
78.750  
840*500  
37.500  
1024*625  
1056*628  
1040*666  
1056*625  
1344*806  
1328*806  
1312*800  
35.156  
SVGA  
37.879  
48.077  
46.875  
48.363  
XGA  
EGA  
56.476  
60.023  
IBM MODES  
640*350@70Hz  
720x400@70Hz  
800*449  
900*449  
31.469  
31.469  
P
N
70.086  
P
N
25.175  
28.322  
70.087  
MAC MODES  
49.728  
57.284  
SVGA  
XGA  
832*624@75Hz  
1024*768@60Hz  
1024*768@75Hz  
1152*667  
1312*813  
1328*804  
N
N
N
74.551  
60.001  
74.927  
N
N
48.780  
64.000  
80.000  
XGA  
60.241  
N
Troubleshooting  
This LCD Monitor has pre-adjusted using factory standard VGA timings. Due to the output timing differences among  
various VGA cards in the market, users may initially experience an unstable or unclear display whenever a new  
display mode or new VGA cardis selected.  
Attention  
This LCD Monitor Supports Multiple VGA Modes. Refer to the Standard Timing Table for a listing of modes supported  
by this LCD Monitor.  
PROBLEM Picture is unclear and unstable  
The picture is unclear and unstable, please perform the following steps :  
1. Enter PC to "Shut Down Windows" status while you're in MS-Windows environment.  
2. Check the screen to see if there's any black vertical stripes appear. If there are,take advantage of the "Clock"  
function in OSD menu and adjust (by increment or decrement numbers)until those bars disappear.  
3. Move to "FOCUS" function in OSD menu again and adjust the monitor screen to its most clear display.  
4. Click "No" on "Shut Down Windows" and back to the normal PC operating environment.  
PROBLEM There is no picture on LCD Monitor  
If there's no picture on the LCD Monitor, please perform the following steps:  
1. Make sure the power indicator on the LCD Monitor is ON, all connections are secured,and the system is running  
on the correct timing. Refer to Chapter 3 for information on timing.  
2. Turn off the LCD Monitor and then turn it back on again. If there is still no picture,press the Adjustment Control  
button several times.  
3. If step 2 doesn't work, connect your PC system to another external CRT.If your PC system Functions properly with  
a CRT Monitor but it does not function with the LCD Monitor,the output timing of the VGA card may be out of the  
LCD's synchronous range.  
Please change to an alternative mode listed in the Standard Timing Table or replace the VGA card,and then repeat  
steps 1 and 2.  
PROBLEM There is no picture on LCD Monitor  
If you have chosen an output timing that is outside of the LCD Monitor's synchronous range (Horizontal: 24 ~ 80 KHz  
and Vertical:56 ~ 75 Hz), the OSD will display a "Out of Range" message. Choose a mode that is supported by your  
LCD Monitor. Also, if the signal cable is not connected to LCD monitor at all or properly, the monitor screen will  
a message "No Input Signal".  
display  
Caution: Do not attempt to service the monitor yourself or open the computer yourself.  
Please refer all servicing to qualified service personnel if the problems cannot be solved in "Troubleshooting" section.  
11  

Ariston Boiler 47 116 17 User Manual
AudioBahn Natural Sound Subwoofer AW831T User Manual
Black Decker BLP6600M User Manual
Bontrager 253427 User Manual
Boston Acoustics SR80 User Manual
Clarion SRW1045 User Manual
Fusion Electronics Car Speaker MS FR7021 User Manual
Hamilton Beach 70610C User Manual
JVC 1001MKV_UN_SN User Manual
JVC GY DV301 User Manual