Version 1.2, January 2008
701P46233
XeroxG45e95ttCionpgier/Printer
Started
Table of contents
Load paper in the optional Oversized High Capacity Feeder
Xerox 4595 Copier/Printer Getting Started
i
Table of contents
Change/confirm the tray settings from the All Services
Xerox 4595 Copier/Printer Getting Started
ii
Table of contents
Xerox 4595 Copier/Printer Getting Started
iii
Table of contents
Xerox 4595 Copier/Printer Getting Started
iv
1. Product Overview
KEY POINT: The screens shown in this guide may or may not
reflect the screens displayed on your system. The screens vary
from system to system and from marketplace to
marketplace. Therefore, the screens in this guide are a
representation of the type of screens that may be seen on your
particular system.
Related information sources
This section describes the guides provided with this machine.
•
•
•
User Guide: This guide describes all the necessary steps for
copy/print/scan jobs, clearing paper jams, daily care, and
safety information.
System Administrator Guide: System Administrators use
this guide to set up the machine defaults/settings and the
network environment.
PostScript User Guide: This guide provides information for
installing print driver, configuring the printer environment, and
other information related to the CentreWare Utilities CD-ROM.
Customer documentation updates
You can get the latest customer documentation and information for
following:
•
•
Enter your product number (e.g., 4110, 4595) in the Search
field and select Search.
Select the Support & Drivers link and then use the search
options to locate your specific printer.
information for your product.
Xerox 4595 Copier/Printer Getting Started
1-1
1. Product Overview
No.
Component
DADF
Function
Duplex Automatic Document Feeder
Holds a document in place on the document glass.
1
2
3
Document cover
Control Panel
The Control Panel consists of the Touch Screen and Numeric Keypad.
4
5
6
7
8
9
Document glass
Power switch
Front cover
Place a document here in order to copy it.
Switches on/off the machine power.
Open this cover to clear paper jams and to replace the waste toner bottles.
Open this cover to replace the toner cartridge.
Contains the media used for copy or print output.
Left Cover
Tray 1, 2, 3, 4
Locking casters
Locks the wheels of the machine. Lock these casters after moving the
machine to its installation site.
10 Bottom left cover
Open this cover to remove paper jams.
11 Front cover for the Open this cover to access the bottom left cover.This cover and the trays 6 and
optional Trays 6
and 7
7 are part of the optional High Capacity Feeder (HCF).
12a Tray 6, 7 (optional Contains the media used for copy or print output.
HCF)
12b Tray 6 (optional
OHCF)
Alternative to the 2-drawer HCF, the optional Oversized High Capacity Feeder
(OHCF) feeds oversized stock up to 13 x 19 in/SRA3 paper.
13 Tray 5 (Bypass)
Load nonstandard paper, such as heavy stock or other special media, that
cannot be loaded in trays 1-4.
Xerox 4595 Copier/Printer Getting Started
1-3
1. Product Overview
16
15
17
18
14
19
20
26
25
24
23
22
21
Xerox 4595 Copier/Printer Getting Started
1-4
1. Product Overview
No.
Component
Function
14 Left cover
Open to access the top cover and to remove paper jams.
Open to remove paper jams.
15 Front cover
16 Confirmation indicator
17 Document guides
18 Document feeder tray
19 Document output tray
20 Document Stopper
This lights when a document is loaded correctly.
Use these guides to align the edges of the document.
Load documents here.
Retrieve scanned documents here.
Holds large document, such as 11 x 17 in./A3, in place. When not in use,
position it upward.
21 Waste toner container
cover
Open this cover when removing the waste toner bottle.
22 Waste toner container
Collects used toner.
23
Fuses the printed image on the paper.
The Fuser is extremely hot and will cause injury if jam clearing
instructions are not followed.
Fuser
24 Lever
Use in order to pull out the transfer module.
25 Transfer module
Copies the image from the drum to the paper. Open this to remove
paper jams.
26 Toner cartridge
Provides toner for laying down the image on the paper.
Xerox 4595 Copier/Printer Getting Started
1-5
1. Product Overview
27
D Finisher
29
30
28
31
32
40
39
38
37
36
35
34
33
Xerox 4595 Copier/Printer Getting Started
1-6
1. Product Overview
No.
27
Component
Function
Post-process inserter
(Cover/Transparency
separator tray) / Tray 8
Load paper for cover or transparency separators. Paper loaded here is
not used for copying.
28
29
Decurl button
Output tray
For lighter weight paper especially, press this button to decurl the output.
Copies are delivered here when specific output features are selected,
such as Automatic sorting, Collated, Uncollated, or Normal.
30
31
32
33
Finisher tray
Receives copies when you select stapled, punched, and Z-folded copies.
Receives copies when you select Bi-Fold or Bi-Fold + Stapling.
Booklet output tray
Booklet output tray button Press this button to deliver and retrieve booklets from the output area.
Right cover
Open to clear paper jams, replace staples, clear jammed staples, or
remove the scraps from the puncher.
34
35
Staple cartridges for
booklet
There are two staple cartridge for booklet. Remove this cartridge to
replace staples and clear staple jams.
Staple cartridge
Contains staples; remove this cartridge to replace staples and clear
staple jams.
36
37
Punch scrap container
Collects the scraps from the puncher. Open to remove the scraps.
Receives copies when you select Tri-Fold In or Tri-Fold out.
Tri-Fold output tray
(optional)
38
39
40
Tri-Fold output tray button Press this button to open tri-Fold output tray.
Left cover.
Open this cover to access the machine and to clear paper jams.
Staple cartridge storage
space
Staple cartridge for replacement can be stored (D Finisher only).
NOTE 1:Throughout this guide, Finisher D, Booklet Finisher D, or
Finisher D2 may be referred to simply as the Finisher.
NOTE 2:Throughout this guide, the Duplex Automatic Document
Feeder is abbreviated as “Document Feeder” or “DADF.”
Xerox 4595 Copier/Printer Getting Started
1-7
1. Product Overview
D2 Finisher
41
42
43
44
No.
41
Component
Staple cartridge
Function
Contains staples; remove this cartridge to replace staples and clear
staple jams.
42
43
44
Staple waste container
Right cover
Container for staple waste; remove this cartridge when full (D2 Finisher
only).
Open to clear paper jams, replace staples, clear jammed staples, or
remove the scraps from the puncher.
Post-process inserter
(Cover/Transparency
separator tray) / Tray 8
Load paper for cover or transparency separators. Paper loaded here is
not used for copying.
Xerox 4595 Copier/Printer Getting Started
1-8
1. Product Overview
Control Panel
The Control Panel consists of the Touch Screen, Pathway buttons,
Feature buttons, and Numeric Keypad. The following describes
the names and functions of components on the control panel.
International Control Panel (no words)
Pathway buttons
Touch Screen
Numeric Keypad
Feature buttons
Control Panel with words
Xerox 4595 Copier/Printer Getting Started
1-9
1. Product Overview
Component
Function
Touch Screen
Allows selections to be made simply by touching
a button on the screen.
Numeric Keypad
Press these buttons to enter the number of
copies, passwords, and other numerical values.
Pathway buttons
1
2
3
Online indicator: This lights when data is
transmitting from this machine or when it is
receiving data from a client.
2
3
1
7
Job Status: Press this button to confirm or
cancel currently running jobs or completed or
to confirm or print saved documents.
Review: Press this button to open the
Review screen in order to check the status of
copy and scan features whose settings have
changed from the defaults. You can also
check the destination information for sending
e-mail.
4
6
4
Machine Status: Press this button to check
the machine status, meters, and the state of
consumables and print reports.
5
5
6
All Services: Displays the main menu
screen.
Custom Buttons 1, 2, 3: Use for these
buttons to access the copy feature or other
customized feature.
7
Job in Memory indicator: This indicator lights
when data is stored in the machine's
memory.
Xerox 4595 Copier/Printer Getting Started
1-10
1. Product Overview
Component
Function
Feature buttons
1
Log In/Out: This button is used by the
System Administrator to log into the System
Administration mode or Login Setup/Auditron
Administration mode.
2
1
2
3
Power Saver: Lights when the machine is in
the Power Saver mode. To cancel the Power
Saver mode, press this button.
3
Clear All: Press this button to clear all the
programming and return the machine to its
defaults.
4
5
6
Stop: Press this button to stop the current
copy job or communications.
6
Start: Press this button to start the copy
process.
4
Interrupt: Pressing this button interrupts the
print or copy process to give another job
higher priority; the Interrupt indicator
lights. Press the button after the job is
completed to resume the previous operation.
5
Xerox 4595 Copier/Printer Getting Started
1-11
1. Product Overview
Power on/off
Switch on the power before operating the machine. The machine
warms up in approximately five minutes after which you can make
copies. Switch off the machine at the end of the day or when it is
not in use for a long period of time. Use the Power Saver feature
to reduce the power consumption of the machine.
For information about power saving feature, refer to “Power Saver
Power on
Perform the following to power on the machine:
1. Open the cover.
2. Press the power switch to the on position [|].
NOTE: The "Please wait..." message on the Control Panel
indicates that the machine is warming up. The machine cannot be
used while it is warming up.
Xerox 4595 Copier/Printer Getting Started
1-12
1. Product Overview
Power off
Perform the following to power off the machine:
1. Before switching off the power ensure that all copy or print jobs
have completely finished. Furthermore, ensure that the
<Online> indicator is not lit.
KEY POINT 1: Switching off the power before copy/print jobs
are complete loses any data that is being processed.
KEY POINT 2: Never switch off the power while:
– While data is being received
– While jobs are being printed.
– While jobs are being copied
– While a scan is being executed
2. Press the power switch to the off position [ ].
KEY POINT:The power off process continues internally after
the power switch is turned off. Therefore, do not immediately
unplug the power cord from the power outlet.
NOTE: If you have switched off the power, wait ten seconds
before switching on the power again.
About the circuit breaker
This product is equipped with a circuit breaker.
The circuit breaker is normally On ("l") position, as shown in the
figure. If power to the machine is interrupted, the circuit breaker
trips and the switch is in the Off (“O”) position.
If the breaker is Off ("O") position, contact your Customer Support
Center as there might be some unusual conditions.
Xerox 4595 Copier/Printer Getting Started
1-13
1. Product Overview
Power Saver mode
The machine is equipped with a Power Saver feature that
automatically reduces power consumption after a period of time of
inactivity. The Power Saver feature has two modes, a Low Power
mode and Sleep mode.
The machine enters the Low Power mode after the machine
remains inactive for a preset time period. Once activated, the
machine remains in the Low Power mode until activity occurs or
until it a second period of time elapses. If the machine continues
to remain inactive for another preset time period, it then enters the
Sleep mode.
Example: The Low Power mode is set for fifteen minutes and the
Sleep mode is set for sixty minutes. With this criteria, if the
machine is inactive for fifteen minutes, it then enters the Low
Power mode. If the machine continues to remain inactive for an
additional forty-five minutes, it then enters the Sleep mode.
KEY POINT: The machine requires more time to warm-up from a
Sleep Mode than it does from a Low Power Mode.
Xerox 4595 Copier/Printer Getting Started
1-14
2. Basic Operation
Basic copying and scanning
Copying:
This function and its related features copies original documents
and does one of the following:
•
•
•
Immediately prints output copies of the original document.
Prints copies and saves the scanned original for future use.
Saves the scanned original for future use and does not print a
copy now.
Scanning:
This function and its related features scans the original documents
and does one of the following:
•
Sends the scanned data as an e-mail attachment to the
designated address.
•
•
•
Saves the scanned data to the machine’s mailbox.
Saves the scanned data to the server as a Job Template.
Sends the scanned data to a networked workstation using file
transfer protocol (FTP) or server message block (SMB).
NOTE: For more detailed information on copying and scanning,
refer to your User Guide.
Xerox 4595 Copier/Printer Getting Started
2-1
2. Basic Operation
Loading documents
Documents may be loaded by using one of the following:
•
DADF: Use this to feed a single sheet or multiple sheets
•
Document Glass: Use this copy a single sheet or bound
documents, such as books
DADF
The DADF supports a single sheet and multiple-sheet documents,
with sizes ranging from 5.5 x 8.5 in. (A5), (short edge feed -
(long edge feed - LEF) to a maximum of 11 x 17 in.
(SEF).
SEF) or
(A3)
The DADF automatically detects documents of standard sizes
only. For documents that are nonstandard size, you must input
the size in the Original Size field.
The DADF accepts the following.
Number of
Document type (weight)
sheets
Lightweight paper (38-49 g/m2)
Plain paper (50-80g/m2)
250 sheets
250 sheets
150 sheets
100 sheets
Heavyweight paper (81-128g/m2)
Heavyweight paper (129-200g/m2)
Document Glass
The Document Glass accepts single-sheet or book-form
documents up to a maximum of 11 x 17 in./A3 size.
CAUTION: When copying thick documents/books, do not use
excessive force to press the Document Glass cover against the
documents as this may cause damage to the Document Glass.
Xerox 4595 Copier/Printer Getting Started
2-2
2. Basic Operation
Copy/Scan procedure
Follow these instructions when making basic copies or scanning
documents.
KEY POINT: In order to prevent paper jams, use the Document
Glass when copying folded or creased documents.
1. Load documents into the DADF.
b. Load documents face-up into the DADF. Remove any
paper clips and staples before loading documents.
c. When the documents are loaded correctly, the
Confirmation indicator lights.
d. Move the document guide until it just touches the edge of
the documents.
NOTE: When loading documents in the DADF, the timing for
lifting up the document feeder tray may be set.
Xerox 4595 Copier/Printer Getting Started
2-3
2. Basic Operation
e. Proceed to Step 3.
2. To use the Document Glass, open the document cover.
a. Place the document face down and align it against the
inside, left corner of the document glass.
b. Close the document cover.
NOTE:The size of the document on the glass is displayed
on the Message Area of the Touch Screen, if the document
is standard size;
c. Proceed to Step 3.
3. Press the All Services button,
All Services
Xerox 4595 Copier/Printer Getting Started
2-4
2. Basic Operation
or press the Copy button (if it is available):
The following screen is displayed:
NOTE: The features displayed on the screen depend on the
configuration of your machine.
•
•
Xerox 4595 Copier/Printer Getting Started
2-5
2. Basic Operation
4. Select Copy.
If the previous settings still remain, press the Clear All button.
Clear All
5. Select one of the copy buttons (circled below).
•
•
Copy: This feature copies scanned documents.
Copy & Save: This feature copies scanned documents
Xerox 4595 Copier/Printer Getting Started
2-6
2. Basic Operation
and save them as data to the mailbox on the machine You
can print saved data from the Mailbox or change settings.
•
Save Only: This feature saves scanned documents as
data to the mailbox on the machine. You can print saved
data from the Mailbox or change settings.
For details about Copy & Save and Save Only, refer to the User
Guide.
6. Select the features to set from each tab as necessary.
NOTE: The features shown above may vary depending on
your machine configuration.
7. Enter the desired number of copies by pressing the
corresponding numbers on the keypad.
Numeric Keypad
•
•
A maximum quantity of 9999 can be entered.
The entered number appears on the upper right of the
display.
Xerox 4595 Copier/Printer Getting Started
2-7
2. Basic Operation
•
If you enter an incorrect value, press the C button and re-
enter the correct value.
C button
•
8. Select the desired scanning function.
•
•
•
•
E-mail: This feature scans the original documents and
sends the scanned data as an e-mail attachment to the
designated address.
Scan to Mailbox: This feature scans the original
documents and saves the scanned data to the machine’s
mailbox.
Network Scanning (Job Template): This feature scans
the original documents and saves the scanned data to the
server as a Job Template.
Scan to FTP / SMB: This feature scans the original
documents and sends the scanned data to a networked
computer using file transfer protocol (FTP) or server
message block (SMB).
NOTE: For the purpose of this procedure, the Scan to
Mailbox feature is used.
Xerox 4595 Copier/Printer Getting Started
2-8
2. Basic Operation
9. Select Scan to Mailbox.
If the previous settings still remain, press the Clear All button.
Clear All
10. Select a mailbox to which the data will be saved.
NOTE: If you have the optional Color Scanner Kit installed, the
lower portion of the screen show above will be different. Consult
the Scan chapter in the User Guide for more information.
11. If appropriate, select desired features from the various tabs.
Proceed to the next step.
Xerox 4595 Copier/Printer Getting Started
2-9
2. Basic Operation
12. Press the Start button to copy or scan the job.
Start
NOTE 1: If a problem occurs, an error message appears in the
display of the Touch Screen. Follow the instructions on the
screen to correct the problem.
NOTE 2: At this time, you can program your next copy or scan
job. For more information, refer to your User Guide.
Canceling a copy or scan job
To cancel a copy or scan job, follow the procedure below.
1. Press Stop either on the touch screen or the Stop button on
the Control Panel.
Stop
2. As the copy or scan job stops, the screen displays a Clear
button.
Xerox 4595 Copier/Printer Getting Started
2-10
2. Basic Operation
Touch the Clear button to stop the job.
button on the Control Panel.
Job Status
4. From the Job Status screen, choose the job to cancel, and
then select Stop.
Xerox 4595 Copier/Printer Getting Started
2-11
2. Basic Operation
Printing
Use the following procedure when printing from your client
workstation.
NOTE: The printing steps and screens may vary depending on the
application software you are using. For specific information, refer
to the documentation provided with each application.
1. Select File and Print from the application’s menu.
2. Confirm the Printer Name and click Properties, if necessary.
3. Configure the properties if necessary.
4. Click OK.
5. Click OK in the Print dialog box.
Xerox 4595 Copier/Printer Getting Started
2-12
2. Basic Operation
Print Copy & Print Jobs documents procedure
Use the following procedure when printing Copy & print Jobs
documents at the machine.
NOTE: Features and screens may vary depending on your
machine’s configuration.
1. Press the All Services button.
All Services
2. Select Check Mailbox.
Xerox 4595 Copier/Printer Getting Started
2-13
2. Basic Operation
3. Select Copy & Print Jobs.
4. Select a mailbox.
5. Select Document List.
Xerox 4595 Copier/Printer Getting Started
2-14
2. Basic Operation
6. Select a document.
NOTE: Up to 100 copied, printed, and scanned documents
may be stored.
7. Select the Change Settings / Print button.
8. Select the desired item or items.
9. Select Print.
Xerox 4595 Copier/Printer Getting Started
2-15
2. Basic Operation
Xerox 4595 Copier/Printer Getting Started
2-16
3. Loading Paper
About paper
Paper types in the trays
The machine automatically detects the size and orientation of
loaded paper in trays. The paper type, however, must be
set. Normally, plain paper type is set for each tray. If you load
paper that is different from plain, you must change the paper type
settings. You may also specifically name the paper and give it a
user-defined type. A maximum five paper types can be set as
user-defined paper.
Automatic tray selection
Network print jobs:
The machine automatically selects a paper tray that corresponds
to your document size and orientation if the following conditions
exist:
•
You are using Printer Command Language (PCL) print drivers,
and
•
You select Paper Tray on the Paper/Output tab
This is called Automatic Tray Selection.
Copy jobs:
When making copies, Automatic Tray Selection is active if Auto is
selected for Auto Paper Select. If there are two or more
corresponding trays in Automatic Tray Selection, the machine
chooses the tray that has the highest Paper Type Priority. This is
set at Paper Type. During Automatic Tray Selection, trays that
have Paper Type Priority set to Off are not used for printing the
job. Also, if the Paper Type Priority setting is the same for all
trays, then Automatic Tray Selection is determined by Paper Tray
Priority.
NOTE 1:Tray 5 (Bypass) cannot be used with Automatic Tray
Selection.
NOTE 2:If the machine runs out of paper during a copy or print
job, you must refill the tray that the machine chose for your print
job. Ensure that the tray is set for the same size and orientation
as it was before paper was depleted.
Xerox 4595 Copier/Printer Getting Started
3-1
3. Loading Paper
Loading paper in Trays 1 and 2
Use the following procedure for loading paper in trays 1 and 2.
NOTE: When the machine runs out of paper during a copy or print
job, the Control Panel displays a message. Follow the instructions
on the Control Panel for adding paper to the appropriate tray or
trays. The copy or print job automatically resumes once paper is
added.
1. Slowly pull out the tray until it stops.
2. Load and align the edge of the paper against the left edge of
the tray with the side to be copied or printed on facing down.
KEY POINT:Do not load paper above the MAX line.
3. Gently push the tray in until it stops.
Xerox 4595 Copier/Printer Getting Started
3-2
3. Loading Paper
Loading paper in Trays 3 and 4
Use the following procedure for loading paper in trays 3 and 4.
NOTE: When the machine runs out of paper during a copy or print
job, the Control Panel displays a message. Follow the instructions
on the Control Panel for adding paper to the appropriate tray or
trays. The copy or print job automatically resumes once paper is
added.
1. Slowly pull out the tray until it stops.
2. Remove any paper from the tray.
3. Expand the two paper guide levers to the desired paper size.
4. Load and align the edge of the paper against the left edge of
the tray with the side to be copied or printed on facing down.
5. Move the two paper guide levers until they just touch the
edges of the paper.
a. Ensure that the paper guides fit correctly into the slots on
the tray and release the levers.
Xerox 4595 Copier/Printer Getting Started
3-3
3. Loading Paper
b. Ensure that the paper guides are adjusted to the same
size as the paper in the tray.
KEY POINT:Do not load paper above the MAX line.
6. Gently push the tray in until it stops.
Loading paper in tray 5 (Bypass)
If you copy or print to a paper size that is different from the paper
loaded in the trays, use Tray 5, the Bypass for your copy or print
job.
Use the following procedure for loading paper in Tray 5 (Bypass).
1. Open Tray 5.
NOTE: If necessary, pull out the extension part of the tray.
2. Hold the center of the paper guides and slide to the desired
paper size.
3. Load with the side to be copied or printed on facing up, and
insert the paper along the guide until it stops.
Xerox 4595 Copier/Printer Getting Started
3-4
3. Loading Paper
KEY POINT:Do not load paper above the MAX line. Do not
load more than one size into the tray.
4. When loading nonstandard paper size, move the paper guides
to accommodate the paper.
5. Complete your copy or print job.
Loading paper in optional (HCF) Trays 6 and 7
If you have the optional Trays 6 and 7, use the following procedure
for loading paper into them.
NOTE: When the machine runs out of paper during a copy or print
job, the Control Panel displays a message. Follow the instructions
on the Control Panel for adding paper to the appropriate tray or
trays. The copy or print job automatically resumes once paper is
added.
1. Slowly pull out the tray until it stops.
2. Load and align the edge of the paper against the left edge of
the tray with the side to be copied or printed on facing up.
KEY POINT:Do not load paper above the MAX line.
3. Gently push the tray in until it stops.
Xerox 4595 Copier/Printer Getting Started
3-5
3. Loading Paper
Load paper in the optional Oversized High Capacity Feeder (Tray 6)
1. Pull out the tray towards you until it stops.
WARNING: When pulling out the paper tray, do it slowly. If pulled
out with too much force, the tray can hit and injure your knees.
2. Squeeze the handle on the paper guide (A) and slide the guide
to the desired paper size. Squeeze the handle on the paper
guide (B) and slide the guide to the desired paper size.
3. Fan the sheets before loading them into the tray. With the side
to be printed on facing up, load and align the paper stack in
the lower right corner of the tray as shown below.
NOTE: Do not load paper exceeding the maximum fill line. Doing
so might cause paper jams or machine malfunctions. When
loading drilled stock, place the paper with its drilled side to the
right. When loading tab stock, place the tabs to the left.
4. Slide both paper guides to just touch the edges of the paper
stack.
NOTE: Position the paper guides correctly to match the paper
size. If the position of the paper guide is not correct, the paper
may not be fed properly and paper jams may occur.
CAUTION: For paper heavier than 256 gsm, slide both Paper
Weight Switches to the heavier weight position (257 - 300 gsm).
Failure to do so may result in paper jams.
Xerox 4595 Copier/Printer Getting Started
3-6
3. Loading Paper
5. Move both Paper Weight Switches to their appropriate
positions.
6. Push the tray in gently until it comes to a stop.
NOTE: When the loaded tray is closed, the tray position is
automatically adjusted in the front/back direction based on the
paper size.
Loading paper in Tray 8 (Post-Process Inserter)
Use the following procedure for loading paper into the
Post-Process Inserter (Tray 8),
KEY POINT: The Post-Process Inserter (Tray 8) is used when
your desired output includes separators, or covers; therefore, it
cannot have an image copied on to it. Your separator or cover
paper may be blank or with an image already copied onto it.
1. Hold the center of the paper guides and slide to the desired
paper size.
2. Load the separator or cover paper into the tray; ensure that is
aligned to the front of the tray.
Xerox 4595 Copier/Printer Getting Started
3-7
3. Loading Paper
Loading tab stock into any tray
When using single reverse tabs, load the tabs on the right with the
highest tab at the front of the machine; refer to the illustration
below:
Loading tab stock into Tray 5 (Bypass) or Tray 8 (Post-Process Inserter)
When using single straight tabs, load the tabs on the left with the
highest tab at the front of the machine (the Bypass tray); refer to
the illustration below:
Xerox 4595 Copier/Printer Getting Started
3-8
3. Loading Paper
Load tab paper in trays 3 to 4
1. Pull out the tray towards you until it stops.
WARNING: When pulling out the paper tray, do it slowly. If pulled
out with too much force, the tray can hit and injure your knees.
2. Load and align the edge of the tab paper against the right
edge of the tray with the side to be copied or printed on facing
down.
M A X
3. Move the two paper guide levers while holding their grips so
that they lightly contact the edges of the paper.
Ensure that the levers are positioned correctly.
NOTE: Do not load paper exceeding the maximum fill line. Doing
so might cause paper jams or machine trouble.
Xerox 4595 Copier/Printer Getting Started
3-9
3. Loading Paper
Loading tab paper in Tray 5 (Bypass)
1. Open Tray 5 (Bypass).
NOTE: If necessary, extend the extension flap. The extension flap
can be extended in two stages. When pulling out the
extension flap, do it gently.
2. Hold the center of the paper guides and slide them to the
desired paper size.
3. Place the paper with the side to be copied or printed facing up
and the bottom side to be fed first. Insert the paper slowly to
the end along the paper guide.
Xerox 4595 Copier/Printer Getting Started
3-10
3. Loading Paper
Loading tab paper in Tray 8 (Post-process inserter)
1. Hold the center of the paper guides and slide them to the
desired paper size.
2. If the paper in already printed on, load the paper with the
printed side facing up and with the tab side to be fed first.
Change/confirm the tray settings
If paper tray types have been changed, the settings must be
modified to reflect the paper that is loaded in the tray. The
following describes how to change or confirm the paper attributes
of the paper loaded in the trays.
Change/confirm the tray settings from the All Services screen
NOTE: The Control Panel screens shown may or may not reflect
your system configuration. The Control Panel screens vary from
system to system and from marketplace to
marketplace. Therefore, the Control Panel screens shown here
are a representation of the type of screens that may be seen on
your particular system
Xerox 4595 Copier/Printer Getting Started
3-11
3. Loading Paper
You can manually confirm and/or change the paper settings (such
as weight, size, type, etc.) from the All Services/Setup Menu on
the printer Control Panel.
KEY POINT: To change or confirm the tray settings from the All
Services screen, the System Administrator must program the
Setup Menu in System Settings so that the Paper Tray
Attributes feature is enabled. For more information, see your
System Administrator, or refer to the System Administration
Guide, Chapter 8, Setups, the section entitled “Setup Menu.”
1. From the Printer Control Panel All Services screen, select
Setup Menu.
2. Select Paper Tray Attributes.
3. Select the desired paper tray and select Change Settings.
4. If necessary, select Paper Size.
5. Select either Auto Size Detect or Variable.
•
If you select Auto Size Detect, select save to save and
close the window.
•
If you select Variable, the screen displays:
a.
Select the width and height of the paper by selecting
the up, down, right, and left buttons.
b.
Select Save.
6. Select Paper Type/Color.
7. Select the desired Paper Type and if applicable, the Paper
Color, and then select Save.
NOTE: If the optional OHCF (Tray 6) is attached, an additional
Paper Type option called Coated Stock is available.
8. Select Save to return to the Tray screen.
9. Select Save to return to the Paper Tray Attributes screen.
10. Choose one of the following:
a. If you want to change the attributes for another tray, repeat
b. If you finished, repeatedly select Close until you return to
the All Services screen.
Xerox 4595 Copier/Printer Getting Started
3-12
3. Loading Paper
Copy/print on tabs
This section provides information on:
•
Programming features on the Printer Control Panel for a copy
job with tabs, and
•
Programming features from the print driver for network print
jobs that require tabs.
Copy job with tabs
1. Load the tab stock in Tray 5 (Bypass).
2. For Tray 5 (Bypass) program the following (from the Setup
Menu):
•
•
•
For Paper Size: Standard Size (8.5 x11 in./A4)
For Paper Type: Tab Stock 1
Select Save/Close/Exit until you return to the All
Services screen
3. Select Copy from the All Services screen.
4. Select the desired Copy feature.
5. Select Output Format.
6. For Output Orientation, select Face Down.
7. Select Save.
8. From Output Format, select Tab Margin Shift and Copy to
Tab.
9. Select Save.
10. Enter the desired output quantity.
11. Select Start.
Xerox 4595 Copier/Printer Getting Started
3-13
3. Loading Paper
Network print on tabs with the PCL print driver
1. From your computer, open the desired document to print.
2. Select File > Print.
3. Select the desired printer
4. Select Properties.
5. For Paper/Output, select:
•
•
Paper Size = 8.5 x 11”/A4
Output Size = 8.5 x 11”/A4
6. Select the Tray/Layout tab.
7. For Paper Source, select the desired tray (where tabs are
loaded).
8. Select the Detailed Settings tab.
9. For Items:, scroll to and select Tab Margin Shift.
10. Select On for Settings for:/Tab Margin Shift.
11. Select OK to save and close the Properties window.
12. Select the desired copies/quantity and OK to print the job.
Network print on tabs with the PS print driver
1. From your computer, open the desired document to print.
2. Select File > Print.
3. Select the desired printer.
4. Select Properties.
5. For Paper/Output, select:
•
•
•
Paper Size = 8.5 x 11”/A4
Paper Source = Automatically select or Manual Feed
Paper Type = Tab Stock 1 or Tab Stock 2
6. Select OK to save and close the Properties window.
7. Select the desired copies/quantity and OK to print the job.
Xerox 4595 Copier/Printer Getting Started
3-14
4. Maintenance
Refer to your User Guide for information and step-by-step
instructions for replacing or maintaining the following
consumables:
•
•
•
•
•
•
Replacing the Dry Ink/Toner Cartridge
Replacing the Dry Ink/Toner Waste Container
Replacing the Staple Cartridge
Replacing the Staple Cartridge for an optional Booklet Maker
Emptying the Punch Scrap Container
Emptying the Staple Waste Container (D2 Finisher only)
Supply items
Approximate yield /
Supply item
Supply number
6R01237
Supply unit
1 unit per carton
1 unit per carton
carton
Dry Ink - Black
81.000
Staple Housing Cartridge
for 100 sheets
8R12912
Holds 5000 staples
5000 per cartridge
5000 per box
Staple refills for Staple
Housing100 sheets
8R12898
8R12925
8R12919
8R12920
3 refills per carton
4 Boxes per carton
1 unit per carton
3 per carton
Staple Refills for Booklet
Maker
Staple Housing Cartridge
for 50 sheets
Holds 5000 staples
5000 per cartridge
Staple refills for Staple
Housing 50 sheets
4 staple refills and
1 replacement waste
container per carton
Staple Cartridge for 100
sheets for D2 Finisher
8R13041
5000 per cartridge
NOTE: Customers on metered price plans will have their toner
shipped to them automatically via the Metered Supplies Automatic
Replenishment Program. Questions/Issues should be directed to
1-800-599-2198. Staples are not included under metered price
plans and ordered separately by calling 1-800-822-2200.
Xerox 4595 Copier/Printer Getting Started
4-1
4. Maintenance
Customer Replaceable Units (CRUs)
Supply item
Reorder number
Impressions/unit
Dry Ink/Toner Waste
Container
8R13036
210,000
Call 1-800-821-2797 to order a new Dry Ink/Toner Waste
Container.
KEY POINT: Please have your machine serial number and your
Xerox 4595 customer number ready when you call to order
supplies.
Xerox 4595 Copier/Printer Getting Started
4-2
5. Problem Solving
This section information about various problem solving
situations. Most times, instructions for solving problems are
provided on the Control Panel, in the User Guide, or a
combination of both.
Fault clearance
If a fault or problem occurs, there are several ways you can
identify the type of fault. Once a fault or problem is identified,
establish the probable cause, and then apply the appropriate
solution.
•
If a fault occurs, first refer to the Control Panel screen
messages and animated graphics. Clear the fault in the order
specified on the Control Panel.
•
If the problem is not resolved by following the screen
messages and graphics, contact the System Administrator for
assistance.
Image quality problems
Various situations can affect the quality of the output. Check the
following conditions to ensure optimum copy performance. If you
still cannot resolve the problem, contact the System Administrator.
•
•
Do not place the machine in direct sunlight or near a radiator.
Follow regular maintenance schedules for cleaning areas,
such as the document glass and output trays.
Refer to your User Guide for more detailed information on various
image quality problems.
Xerox 4595 Copier/Printer Getting Started
5-1
5. Problem Solving
Paper jams
When a paper jams occurs, the machine stops and an alarm
sounds. The Control Panel displays a message. Follow the
instructions for removing the jammed paper. If the paper tears
while attempting to remove it, ensure that you remove any torn
pieces from the machine.
If the Control Panel continues to display a paper jam message
after you have initially removed the jam, the paper is probably
jammed at another location. Continue to follow the instructions on
the Control Panel for removing all paper jam areas.
When you have finished removing a paper jam, the printing
process automatically resumes. If the paper jam occurred during
the copy process, remove the jam. Press the Start button after
removing the jam to resume the copy process.
NOTE: Always refer the Control Panel display for instructions on
removing paper jams. Also refer to your User Guide.
Xerox 4595 Copier/Printer Getting Started
5-2
6. Safety and Notices
Safety notices
This Xerox product and the recommended supplies are designed
and tested to meet strict safety requirements. These include
safety agency approval and compliance to established
environmental standards. Please read the following instructions
carefully before operating the product, and refer to them as
needed to ensure the continued safe operation of your product.
KEY POINT: The safety testing and performance of this product
have been verified using Xerox materials only.
WARNING: Any unauthorized alteration, which may include the
addition of new functions or connection of external devices, may
impact the product certification. Please contact your authorized
local dealer for more information.
Electrical safety
This product shall be operated from the type of electrical supply
indicated on the product data plate label. If you are not sure that
your electrical supply meets the requirements, please consult your
local power company for advice.
•
•
Use only the power cord supplied with this equipment.
This equipment is to be used on a branch circuit that has
larger capacity than rated ampere and voltage of the machine.
See data plate on the rear panel for the rated ampere and
voltage of this equipment. If the machine needs to be moved
to a different location, contact a Xerox Service Representative
or your authorized local representative or service support
organization.
•
•
Plug the power cord directly into a correctly grounded
electrical outlet. Do not use an extension cord. If you do not
know whether or not an outlet is grounded, consult a qualified
electrician.
Do not use a ground adapter plug to connect this equipment to
an electrical outlet that lacks a ground connection terminal.
Xerox 4595 Copier/Printer Getting Started
6-1
6. Safety and Notices
WARNING: You may incur a severe electrical shock if the outlet is
not grounded correctly.
WARNING: This product must be connected to a protective earth
circuit.
•
Do not place the machine where people may step or trip on the
power cord. Do not place objects on the power cord.
•
•
Do not override or disable electrical or mechanical interlocks.
Do not obstruct the ventilation openings. These openings
prevent overheating of the machine.
WARNING: Never push objects of any kind into slots or openings
on this equipment. Making a contact with a voltage point or
shorting out a part may result in fire or electrical shock.
If any of the following conditions occur, immediately switch off the
power to the machine and disconnect the power cord from the
electrical outlet. Call an authorized Xerox service representative
to correct the problem.
•
•
•
The machine emits unusual noises or odors.
The power cord is damaged or frayed.
A wall panel circuit breaker, fuse, or other safety device is
tripped.
•
•
•
Liquid is spilled into the press.
The machine is exposed to water.
Any part of the machine is damaged.
Disconnect device
The power cable is the disconnect device for this equipment and is
attached to the back of the machine as a plug-in device. To
remove all electrical power from the machine, disconnect the
power cable from the electrical outlet.
WARNING: This product must be connected to a protective earth
circuit.
Xerox 4595 Copier/Printer Getting Started
6-2
6. Safety and Notices
Laser safety
North America
This product complies with safety standards and is certified as a
Class 1 Laser product under the Center for Devices and
Radiological Health (CDRH) of the United States Food and Drug
Administration (FDA) implemented regulations for laser
products. This product complies with FDA 21 CFR 1940.10 and
1040.11 except for deviations pursuant to Laser Notice No. 50,
dated July 26, 2001. These regulations apply to laser products
marketed in the United States. The label on the machine indicates
compliance with CDRH regulations and must be attached to laser
products marketed in the United States. This product does not
emit hazardous laser radiation.
CAUTION: Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous exposure of laser light.
Since radiation emitted inside this product is completely confined
within the protective housing and external covers, the laser beam
cannot escape from the machine during any phase of the user
operation.
This product contains laser warning labels. These labels are
intended for use by the Xerox Service Representative and are
placed on or near panels or shields that require special tools for
removal. Do not remove any of the panels. There are no operator
serviceable areas in these covers.
Xerox 4595 Copier/Printer Getting Started
6-3
6. Safety and Notices
Europe and other markets
This product complies with IEC60825, Laser Safety Products.
The equipment complies with laser product performance
standards set by governmental, national, and international
agencies as a Class 1 Laser Product. It does not emit hazardous
radiation as the beam is totally enclosed during all phases of
customer operation and maintenance.
CAUTION: Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
This product contains laser warning labels. These labels are
intended for use by the Xerox Service Representative and are
placed on or near panels or shields that require special tools for
removal. Do not remove any of the panels. There are no operator
serviceable areas inside these covers.
If you need additional safety information concerning the product or
Xerox supplied materials, you may call the following number:
+44 (0) 1707 353434
Safety standards
North America
This Xerox product is safety certified by Underwriters Laboratories
Incorporated to Standards UL60950-1 (first edition), and CSA
International CAN/CSA C22.2 No. 60950-1-03 (First Edition).
Europe and other markets
This Xerox product is safety certified by Underwriters Laboratories
Incorporated to publication IEC60950-1 (2001) First Edition.
Xerox 4595 Copier/Printer Getting Started
6-4
6. Safety and Notices
Maintenance safety
•
•
Do not attempt any maintenance procedure that is not
specifically described in the documentation supplied with your
product.
Do not use aerosol cleaners. The use of supplies that are not
approved may cause poor performance of the press and could
create a dangerous condition.
•
•
Use the supplies and cleaning materials only as directed in
this manual. Keep all materials out of the reach of children.
Do not remove the covers or guards that are fastened with
screws. There are no parts behind these covers that you can
maintain or service.
Do not perform any maintenance procedures unless you have
been trained to do them by a Xerox representative, or unless a
procedure is specifically described in one of the manuals included
with your press.
Operational safety
Your Xerox equipment and supplies were designed and tested to
meet strict safety requirements. These include safety agency
examination, approval, and compliance with established
environmental standards.
Your attention to the following safety guidelines will help ensure
the continued safe operation of your product:
•
Use the materials and supplies specifically designed for your
product. The use of unsuitable materials may result in poor
performance of the machine and possibly a hazardous
situation.
•
•
•
Follow all warnings and instructions that are marked on or
supplied with the machine.
Place the machine in a room that provides adequate space for
ventilation and servicing.
Place the machine on a level, solid surface (not on a thick pile
carpet) that has adequate strength to support the weight of the
machine.
•
Do not attempt to move the machine. A leveling device that
was lowered when your machine was installed may damage
the carpet or floor.
•
•
•
Do not set up the machine near a heat source.
Do not set up the machine in direct sunlight.
Do not set up the machine in line with the cold air flow from an
air conditioning system.
Xerox 4595 Copier/Printer Getting Started
6-5
6. Safety and Notices
•
Do not place containers of coffee or other liquid on the
machine.
•
•
Do not block or cover the slots and openings on the machine.
Do not attempt to override any electrical or mechanical
interlock devices.
WARNING: Be careful when working in areas identified with this
warning symbol. These areas may be very hot and should not be
touched.
If you need any additional safety information concerning the
machine or materials, contact your Xerox representative.
Ozone safety
This product produces ozone during normal operation. The ozone
is heavier than air, and the quantity is dependent on print volume.
Providing the correct environmental parameters, as specified in
the Xerox installation procedures, ensures that concentration
levels meet safe limits.
If you need additional information about ozone, request the Xerox
publication, OZONE by calling 1-800-828-6571 in the USA. For a
French language version, call 1-800-828-6571 in the USA, then
press 2.
Xerox 4595 Copier/Printer Getting Started
6-6
6. Safety and Notices
Notices
Radio frequency emissions
FCC in the USA
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the
Federal Communications Commission (FCC) Rules. These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his/her
own expense.
Changes or modifications to this equipment not specifically
approved by the Xerox Corporation may void the user’s authority
to operate this equipment.
WARNING: Shielded cables must be used with this equipment to
maintain compliance with FCC regulations.
In Canada (ICES-003)
This Class “A” digital apparatus complies with Canadian ICES-
003.
Cet appareil numérique de la classe “A” est conforme á la norme
NMB-003 du Canada.
Regulatory information for RFID
This product generates 13.56 MHz using an Inductive Loop
System as a Radio Frequency IDentification system device
(RFID). This system is certified in compliance with European
Council Directive 99/5/EC and applicable local laws or regulations
as applicable.
Xerox 4595 Copier/Printer Getting Started
6-7
6. Safety and Notices
Safety extra low voltage approval
This Xerox product is in compliance with various governmental
agencies and national safety regulations. All system ports meet
the Safety Extra Low Voltage (SELV) circuits for connection to
customer-owned devices and networks. Additions of customer-
owned or third-party accessories that are attached to the press
must meet or exceed the requirements previously listed. All
modules that require external connection must be installed per the
installation procedure.
Certifications in Europe
The CE marking that is applied to this product symbolizes Xerox
Declaration of Conformity with the following applicable Directives
of the European Union as of the dates indicated:
December 12, 2006:
Council Directive 2006/95/EC amended by Council Directive 93/
68/EEC, approximation of the laws of the member states related
to low voltage equipment.
January 1, 1996:
March 9, 1999
Council Directive 89/336/EEC, approximation of the laws of the
member states related to electromagnetic compatibility.
Council Directive 99/5/EC on radio equipment and
telecommunications terminal equipment and the mutual
recognition of their conformity.
A full declaration, defining the relevant directives and referenced
standards, can be obtained from your Xerox Limited
representative or by contacting:
Environment, Health and Safety
The Document Company Xerox
Bessemer Road
Welwyn Garden City
Herts
AL7 1HE
England
Tel Number +44 (0) 1707 353434
WARNING: This product is certified manufactured and tested in
compliance with strict safety and radio frequency interference
regulations. Any unauthorized alteration which includes the
addition of new functions or the connection of external devices
may impact this certification. Please contact your local Xerox
Limited representative for a list of approved accessories.
WARNING: In order to allow this equipment to operate in
proximity to Industrial, Scientific, and Medical (ISM) equipment,
the external radiation from the ISM equipment may have limited or
special mitigation measures taken.
Xerox 4595 Copier/Printer Getting Started
6-8
6. Safety and Notices
WARNING: This is a Class A product in a domestic
environment. This product may cause radio frequency
interference in which case the user may be required to take
adequate measures.
WARNING: Shielded cables must be used with this equipment to
maintain compliance with Council Directive 89/336/EEC.
It’s illegal...
In the USA
Congress, by statute, has forbidden the reproduction of the
following subjects under certain circumstances. Penalties of fine
or imprisonment may be imposed on those guilty of making such
reproductions.
1. Obligations or Securities of the United States Government,
such as:
• Certificates of Indebtedness
• Coupons from Bonds
• National Bank
Currency
• Federal Reserve Bank
Notes
• Silver Certificates
• Gold Certificates
• Treasury Notes
• Fractional Notes
• Paper Money
• United States Bonds
• Federal Reserve Notes
• Certificates of Deposit
Bonds and Obligations of certain agencies of the government,
such as FHA, etc.
Bonds. (U.S. Savings Bonds may be photographed only for
publicity purposes in connection with the campaign for the sale
of such bonds.)
Internal Revenue Stamps. (If it is necessary to reproduce a
legal document on which there is a canceled revenue stamp,
this may be done provided the reproduction of the document is
performed for lawful purposes.)
Postage Stamps, canceled or uncanceled. (For philatelic
purposes, Postage Stamps may be photographed, provided
the reproduction is in black and white and is less than 75% or
more than 150% of the linear dimensions of the original.)
Postal Money Orders.
Bills, Checks, or Drafts of money drawn by or upon authorized
officers of the United States.
Xerox 4595 Copier/Printer Getting Started
6-9
6. Safety and Notices
Stamps and other representatives of value, of whatever
denomination, which have been or may be issued under any
Act of Congress.
2. Adjusted Compensation Certificates for Veterans of the World
Wars.
3. Obligations or Securities of any Foreign Government, Bank, or
Corporation.
4. Copyrighted material, unless permission of the copyright
owner has been obtained or the reproduction falls within the
“fair use” or library reproduction rights provisions of the
copyright law. Further information of these provisions may be
obtained from the Copyright Office, Library of Congress,
Washington, D.C. 20559. Ask for Circular R21.
5. Certificates of Citizenship or Naturalization. (Foreign
Naturalization Certificates may be photographed.)
6. Passports. (Foreign Passports may be photographed.)
7. Immigration Papers.
8. Draft Registration Cards.
9. Selective Service Induction Papers that bear any of the
following Registrant’s information:
•
•
Earnings or Income
Court Record
•
•
Dependency Status
Previous military
service
•
•
Physical or mental condition
Exception: United States military discharge certificates
may be photographed.
10.Badges, Identification Cards, Passes, or Insignia carried by
military personnel, or by members of the various Federal
Departments, such as FBI, Treasury, etc. (unless photograph
is ordered by the head of such department or bureau.)
Reproducing the following is also prohibited in certain states:
Automobile Licenses, Drivers’ Licenses, and Automobile
Certificates of Title.
The above list is not all inclusive, and no liability is assumed for its
completeness or accuracy. In case of doubt, consult your attorney.
Xerox 4595 Copier/Printer Getting Started
6-10
6. Safety and Notices
In Canada
Parliament, by statute, has forbidden the reproduction of the
following subjects under certain circumstances. Penalties of fines
or imprisonment may be imposed on those guilty of making such
copies.
1. Current bank notes or current paper money.
2. Obligations or securities of a government or bank.
3. Exchequer bill paper or revenue paper.
4. The public seal of Canada or of a province, or the seal of a
public body or authority in Canada, or of a court of law.
5. Proclamations, orders, regulations or appointments, or notices
thereof (with intent to falsely cause same to purport to have
been printed by the Queen’s Printer for Canada, or the
equivalent printer for a province).
6. Marks, brands, seals, wrappers or designs used by or on
behalf of the Government of Canada or of a province, the
government of a state other than Canada or a department,
board, Commission or agency established by the Government
of Canada or of a province or of a government of a state other
than Canada.
7. Impressed or adhesive stamps used for the purpose of
revenue by the Government of Canada or of a province or by
the government of a state other than Canada.
8. Documents, registers or records kept by public officials
charged with the duty of making or issuing certified copies
thereof, where the reproduction falsely purports to be a
certified copy thereof.
9. Copyrighted material or trademarks of any manner or kind
without the consent of the copyright or trademark owner.
The above list is provided for your convenience and assistance,
but it is not all inclusive, and no liability is assumed for its
completeness or accuracy. In case of doubt, consult your solicitor.
Xerox 4595 Copier/Printer Getting Started
6-11
6. Safety and Notices
In other countries
Copying certain documents may be illegal in your country.
Penalties of a fine or imprisonment may be imposed on those
found guilty of making such reproductions, which include:
•
•
•
•
•
Currency notes
Bank notes and cheques
Band and government bonds and securities
Passports and identification cards
Copyright materials or trademarks without the consent of the
owner
•
Postage stamps and other negotiable instruments
This list is not inclusive and no liability is assumed for either its
completeness or accuracy. In case of doubt, contact your legal
counsel.
Environmental notices for the USA
®
As an ENERGY STAR partner, Xerox Corporation has
determined that this product meets the ENERGY STAR guidelines
for energy efficiency.
The ENERGY STAR and ENERGY STAR MARK are registered
United Stated trademarks.
The ENERGY STAR Office Equipment Program is a team effort
between U.S., European Union and Japanese governments, and
the office equipment industry to promote energy-efficient copiers,
printers, fax, multifunction machines, personal computers, and
monitors. Reducing product energy consumption helps combat
smog, acid rain, and long-term changes to the climate by
decreasing the emissions that result from generating electricity.
Xerox ENERGY STAR equipment is preset at the factory. Your
machine will be delivered with the timer for switching to Low
Power Mode from the last copy/print output, set at 15
minutes. The time to switch to power save (auto off/sleep) mode
is set at 60 minutes from the last copy/print output. A more
detailed description of the Power Saver Mode, together with
instructions on changing the default time to suit your work pattern,
can be found in the System Administration Guide, Power Saver
section.
Xerox 4595 Copier/Printer Getting Started
6-12
6. Safety and Notices
Product recycling and disposal
If you are managing the disposal of your Xerox product, please
note that the product may contain lead, mercury, perchlorate, and
other materials whose disposal may be regulated due to
environmental considerations. The presence of lead and
perchlorate is fully consistent with global regulations applicable at
the time that the product was placed on the market.
North America
Xerox operates a worldwide equipment take-back and reuse/
recycle program. Contact your Xerox sales representative (1-800-
ASK-XEROX) to determine whether this Xerox product is part of
the program. For more information about Xerox environmental
For recycling and disposal information, contact your local
authorities. In the United States, you may also refer to the
Perchlorate Material
This product may contain one or more Perchlorate-containing
devices, such as batteries. Special handling may apply, please
If your product is not part of the Xerox program and you are
managing its disposal, please follow the instructions provided in
the above paragraph.
European union
WEEE Directive2002/961EC
Some equipment may be used in both a domestic/household and
aprofessional! business application.
Application of this symbol on your equipment is confirmation that
you must dispose of this equipment in compliance with agreed
In accordance with European legislation end-of-life electrical and
electronic equipment subject to disposal must be managed within
agreed procedures.
Prior to disposal, contact your local dealer or Xerox representative
for end-of-life take-back information.
Xerox 4595 Copier/Printer Getting Started
6-13
|