Unitech Magnetic Stripe Reader Msr206 User Manual

!" MSR120 Simple Manual  
2003/1/21  
MSR 120 SERIES  
Magnetic Stripe Card Reader  
Universal Serial Bus (USB) Interface  
Thank you for purchasing the MSR120 series products. The MSR120 Series USB Interface Magnetic Card Reader is ideal for retail  
systems, time keeping systems, security systems and the card reader related systems. The MSR120 series are designed to offer the user  
a card reader solution that will complement many applications. Triple track MSR120 reader is uniquely designed to read both credit  
cards and Driver Licenses (AAMVA and California standard).  
FEATURES  
Light weight: 120g  
Compact size: 100L*34W*28H (mm)  
LED and Buzzer indicators indicate card status  
Low power consumption  
1
2
3
4
5
Single, dual, or triple track versions allow for reading all types of magnetic cards, including credit cards and drivers licenses.  
CONFIGURATION  
MSR120-33 Triple track 1&2&3  
AGENCY APPROVED  
- Comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules.  
- Comply with CE mark Class A, UL, and cUL  
WARRANTY  
This product is served under one-year warranty of defects in material and functionality to the original purchasers. Within the warranty  
period, if the product found to be defective will be repaired or replaced. This warranty applies to the products only under the normal use  
of the original purchasers, and in no circumstances covers incidental or consequential damages through consumers’ misuse or  
modification of the product.  
WARNING  
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your  
authority to operate the equipment.  
SET-UP  
1) Turn the system power off.  
2) Connect PC and MSR120 USB connector of signal cable to a free USB port  
3) Turn the system power on.  
4) Install USB driver (ref. to Appendix A)  
SPECIFICATIONS  
Recording Method: Two-frequency coherent phase (F2F), compatible with ISO 7811 and AAMVA.  
Swipe Speed:  
5 to 50 in/sec (worst case with +/- 12% jitter card)  
5VDC/120mA  
Power Requirements:  
!" Excerpt from MSR120 Programmer’s Manual (PM010, Rev.1.1)  
Page 1 / 5  
!" --- Proprietary and Confidential ---  
!" MSR120 Simple Manual  
2003/1/21  
3. Insert the USB driver diskette (DISK 2) into the floppy drive and click Next to continue:  
a. Select Search for the best driver for your device and click Next.  
b. Select Specify a location and click Browse. Change the folder of your floppy drive  
(i.e.: A:\Driver\Windows) and click OK.  
c. Double-check the directory that Windows prompts. Click Next.  
!" Excerpt from MSR120 Programmer’s Manual (PM010, Rev.1.1)  
Page 3 / 5  
!" --- Proprietary and Confidential ---  
!" MSR120 Simple Manual  
2003/1/21  
d. Windows will detect the driver (SER9PL.inf) and shows the USB Card Reader.  
Click Next to continue until installation is complete.  
e. Click Next to continue and let Windows copy the needed files to your hard disk.  
Click Finish while installation is complete.  
f. After installing, the System will generate an additional COM Port, USB Card Reader (e.g.: COM3) for the connection to  
RS232 Serial Device.  
!" Excerpt from MSR120 Programmer’s Manual (PM010, Rev.1.1)  
Page 4 / 5  
!" --- Proprietary and Confidential ---  
!" MSR120 Simple Manual  
2003/1/21  
!" Driver Un-installation  
You can uninstall the MSR120 driver by executing Uninstall Program: Dremover98.exe in the driver diskette and click the  
Remove button to accomplish the un-installation.  
!"  
!" Excerpt from MSR120 Programmer’s Manual (PM010, Rev.1.1)  
Page 5 / 5  
!" --- Proprietary and Confidential ---  

Tripp Lite Bp36v18 2u User Manual
Teledyne 730 Bubbler User Manual
Samsung Aw1809b User Manual
Motorola Mbp35bl User Manual
KENWOOD HM620 User Manual
HANSGROHE AXOR PHOENIX 17387XX1 User Manual
FUJITSU LIFEBOOK P701 02 User Manual
DELL ACTIVE PEN PN557W 02 User Manual
DACOR IF42DBOL 02 User Manual
ASUS VK228S User Manual