Samsung Az09f1ke User Manual

OWNER’S  
INSTRUCTIONS  
AZ09F1KE  
WINDOW-TYPE  
ROOM AIR CONDITIONER  
(Cool and Heat)  
E
R
DB68-02037A(1)  
Contents  
PREPARING YOUR AIR CONDITIONER  
Safety Precautions .........................................................................................  
Air Conditioning Unit - Main Parts and Control Panel ....................................  
Getting Started ...............................................................................................  
2
4
5
OPERATING YOUR AIR CONDITIONER  
Cooling Your Room .........................................................................................  
Heating Your Room .........................................................................................  
Airing Your Room ............................................................................................  
Switching the Air Conditioner Off ...................................................................  
Adjusting the Air Flow Direction Horizontally .................................................  
Adjusting the Air Flow Direction Vertically ......................................................  
6
7
8
8
9
9
RECOMMENDATIONS FOR USE  
Operating Recommendations ......................................................................... 10  
Temperature and Humidity Ranges ................................................................ 10  
Cleaning Your Air Conditioner ......................................................................... 11  
Solving Common Problems ............................................................................ 12  
Technical Specifications ................................................................................. 13  
METHOD OF INSTALLATION ................................................................................. 14  
E-3  
Air Conditioning Unit - Main Parts and Control Panel  
The design and shape are subject to  
change according to the model.  
Inner air flow blades  
(right/left orientation)  
Air Outlet  
Outer air flow blades  
(up/down orientation)  
Air inlet (Outside)  
Ventilation lever  
Air inlet (Inside)  
Air filter  
(The air filter is located in inside )  
Power plug  
(The type of power plug may  
differ, depending on the local  
power supply.)  
Temperature  
control dial  
Operating mode  
selection dial  
Air flow blade swing switch  
E-4  
Getting Started  
You have just purchased a w indow -type room air conditioner and it has been installed  
by your installation specialist.  
Your Ow ners Instructions contain much valuable information on using your air conditioner.  
Please take the time to read them as they w ill help you take full advantage of the units features.  
The booklet is organised as follow s.  
The illustration on page 4 show s the air conditioning unit;  
it indicates the location and purpose of the m ain parts and controls on the unit.  
In the m ain part of the docum ent, you w ill find a series of step-by-step  
procedures for each function available.  
The illustrations in the step-by-step procedures use four different symbols:  
PRESS  
PUSH  
IMPORTANT  
NOTE  
E-5  
Cooling Your Room  
You must select the Cool mode if you w ish to low er the temperature  
in your room. You can also set the fan speed.  
Select the operating mode and fan speed.  
1
To cool your room with a...  
Set the operating mode  
selection dial to...  
High fan speed  
Low fan speed  
HI COOL  
LOW COOL  
Result: The air conditioner starts up in Cool mode.  
The fan starts up at the speed selected.  
You can change modes at any time.  
2
To adjust the temperature, turn the temperature control dial towards  
the right and the blue position.  
27˚C ~ 23˚C  
Possible temperatures: Between 18°C and 25°C inclusive.  
Result: The air conditioner starts cooling if the room temperature  
is higher than the selected temperature.  
23˚C  
~ 18˚C  
29˚C  
~ 27˚C  
To control the direction of the air flow, refer to page 9.  
3
E-6  
Heating Your Room  
You must select the Heat mode if you w ish to heat your room  
to a specific temperature. You can also select the fan speed.  
Select the operating mode and fan speed.  
1
To heat your room with a...  
Set the operating mode  
selection dial to...  
High fan speed  
Low fan speed  
HI HEAT  
LOW HEAT  
Result: The air conditioner starts up in Heat mode.  
The fan starts up at the speed selected.  
You can change modes at any time.  
To adjust the temperature, turn the temperature control dial towards  
the left and the red position.  
2
27˚C ~ 23˚C  
Possible temperatures: Between 25°C and 29°C inclusive.  
Result: The air conditioner starts heating if the room temperature  
is lower than the selected temperature.  
23˚C  
~ 18˚C  
29˚C  
~ 27˚C  
To control the direction of the air flow, refer to page 9.  
3
E-7  
Airing Your Room  
If the atmosphere in your room is stale, you can air it using  
the Fan feature and if necessary, evacuate the stale air outside.  
1
If you wish to evacuate stale air outside, pull the ventilation lever on the front  
of the unit and the open position ( ).  
Result: The air inside the room circulates and stale air is evacuated outside.  
Otherwise, push the ventilation lever and the closed position (  
Result: The air simply circulates inside the room.  
).  
Open  
Position  
Closed  
Position  
Set the operating mode selection dial to the FAN position.  
2
Both fan settings (left and right) have the same function.  
Result: The air conditioner starts up in Fan mode.  
To control the direction of the air flow, refer to page 9.  
3
Switching the Air Conditioner Off  
You can sw itch the air conditioner off w henever you w ant.  
To switch the unit off, simply set the operating mode selection dial  
to the OFF position.  
Result:  
The air conditioner stops operating.  
E-8  
Adjusting the Air Flow Direction Horizontally  
Depending on the position of the unit in your room, you can adjust the  
orientation of the inner air flow blades on the right-hand side of the  
unit, thus increasing the efficiency of the air conditioner.  
1
Set the air flow blade swing switch to the  
position .  
Result: The inner blades swing automatically left and right.  
The blades may stop swinging momentarily when the Deice function  
is activated (see page 10 for further details on this function).  
They will start swinging again automatically as soon as the Deice  
function stops.  
2
To stop the blades moving left and right, set the air flow blade swing switch  
to the  
position.  
To stop the blades in a specific position and orient the air flow in the  
corresponding direction, simply set the switch to the  
when the blades are in the required position.  
position  
Adjusting the Air Flow Direction Vertically  
Again depending on the position of the unit in your room , you can  
adjust the orientation of the outer air flow blades on the right-hand  
side of the unit.  
RECOMMENDATION When...  
Adjust the blades to face...  
Cooling  
Heating  
Upwards.  
Downwards.  
Adjust the air flow blades to the required position, by pushing them  
upwards or downwards.  
If you orient the air flow blades downwards and the unit operates  
in Cool mode for a long period of time, dew may:  
Form on the surface of the blades  
Drip from the blades  
E-9  
Operating Recommendations  
Here are a few recommendations that you should follow w hen using  
your air conditioner.  
Topic  
Recommendation  
Heating  
performances  
The heat pump inside the air conditioner absorbs heat from  
outside air and brings it indoors. If the temperature of the outside  
air drops, the air conditioner will heat less. If you find that the room  
is not warm enough, use an additional heating appliance.  
Warm air  
circulation  
The air conditioner circulates warm air to heat your room;  
as a result, some time will be required after starting  
the air conditioner to warm the entire room. If necessary,  
set the air conditioner going a short time before you wish  
to use the room.  
Frost  
When outside temperatures are low and humidity is high,  
frost may form in the units condenser when heating with your  
air conditioner.  
If this happens:  
The unit stops heating  
The air flow blades stop swinging  
The Deice mode is triggered automatically for about  
five minutes.  
No intervention is required from you; after about five minutes,  
the air conditioner starts operating again normally.  
High indoor  
and outdoor  
If both the indoor and outdoor temperatures are high and you  
select the Heat mode, the fan and compressor in the unit may  
temperatures stop at times. This is normal; simply wait until the air conditioner  
switches on again.  
Power failure If a power failure occurs when the air conditioner is operating,  
the unit is switched off. When the power returns,  
the air conditioner starts up again automatically.  
Temperature and Humidity Ranges  
The follow ing table indicates the temperature and humidity ranges,  
w ithin w hich the air conditioner can be used.  
Mode  
Indoor  
Outdoor  
Indoor Humidity  
Temperatures  
Temperature  
Heating  
Cooling  
28°C or less  
0°C to 21°C approx.  
-
21°C to 32°C approx.  
21°C to 43°C approx.  
80% or less  
If the air conditioner is used at...  
Then...  
Higher temperature  
The automatic protection feature may be triggered  
and the air conditioner stopped.  
Lower temperature  
A water leakage or some other malfunction may happen  
if the heat exchanger freezes.  
Higher humidity levels  
Water may condense on and drip from the surface of the unit  
if it is used for long periods.  
E-10  
Cleaning Your Air Conditioner  
Be sure to clean the air filter periodically to m aintain the air conditioner  
in the best condition for a long period of tim e.  
When cleaning the air conditioner, turn it off and pull out  
the pow er plug.  
IMPORTANT  
1
Hold the air filter handle, slightly pull it to the left side and open the front grille.  
The removal of the front grille makes it easier to clean the air  
conditioner. Open the grille as much as possible.  
CAUTION  
Removal and Reassembly of the Front Grille  
For user's safety, a safety clip has been installed in the front grille.  
1
Grasp the lower part of the  
front grille and the air filter  
handle, then open the grille.  
Safety clip  
2
3
Remove the safety clip and  
the front grille.  
When reassembling the front  
grille, you should install the  
safety clip again.  
2
3
4
Pull the air filter to the right side.  
Remove all dust on the air filter with a vacuum cleaner or brush.  
When you have finished, insert the air filter back into its original position.  
5
Wipe the surface of the unit with a neutral detergent and then wipe it again  
with dry cloth.  
(Be sure not to use benzene, solvent or other chemical products.)  
The air conditioner has two or three  
grille grooves depending on the model.  
If you...  
Then...  
Set the fan going for a few hours to  
dry the inside of the air conditioner  
thoroughly.  
Will not be using the  
air conditioner for a  
long period of time  
Switch the air conditioner off and  
unplug it from the wall socket.  
Clean the filter and outer surfaces.  
Have not used the air Set the fan going for a few hours to dry  
conditioner for a long  
period of time  
the inside of the air conditioner  
thoroughly.  
E-11  
Solving Common Problems  
Before contacting the after-sales service, perform the follow ing simple checks.  
They may save you the time and expense of an unnecessary call.  
PROBLEM  
EXPLANATION / SOLUTION  
◆◆ Check that the circuit breaker used for the air conditioner  
The air conditioner does not  
operate at all  
has not been triggered.  
Check that the power cable is plugged into a wall socket and the  
socket is switched on, if necessary.  
Check that the correct operating mode has been selected  
(cooling, heating or airing).  
Check that the correct operating mode has been selected, COOL or HEAT.  
The room temperature may be too low or too high.  
Dust may be blocking the air filter;  
The air conditioner does not  
cool or heat  
refer to page 11 for cleaning instructions.  
Check that there is no obstacle blocking the air flow into or out of the unit.  
Check that the required temperature has been set correctly.  
Increase the fan speed.  
When heating, the required room  
temperature is never reached  
and the air conditioner  
If the air flow is directed downwards, direct it upwards.  
frequently stops  
Check that the air conditioner has been switched on;  
if necessary, turn the operating mode selection dial.  
The air flow direction does not  
change when you set the air flow  
blade swing switch to the  
position  
Air the room.  
Odours are permeated in the  
room during air conditioning  
E-12  
Technical Specifications  
Design and specifications are subject to change w ithout  
notice.  
Model  
Power Supply  
220-240V~, 50Hz  
AZ09F1KE  
E-13  
Method of Installation  
Before installation, be sure to check the installation area  
for the air conditioner, and installation method of the drain hose.  
Checkpoints prior to installation  
Check the cabinet and front grille of the unit for any harmful defects  
such as scratches.  
1
Be sure to check the power supply.  
2
- Refer to the specifications on the label attached to the unit.  
Installation Conditions  
As the unit is heavy, the wall or window of the installation area should  
have sufficient strength and durability for operation of the air conditioner,  
and for prevention of any vibration or noise.  
1
If it is weak, reinforcement work should be performed separately.  
It is advisable to install the air conditioner in the north or west side to  
prevent the effect of direct sunlight.  
2
When installing it in the south or east side due to unavoidable  
circumstances, it is advisable to install the sunshade to prevent the  
direct sunlight.  
In this case, take care not to cause any hindrance to the flow of outside air.  
When installing the air conditioner, be sure to obtain sufficient space on  
the rear side of the unit for smooth flow of air.  
3
When operating the air conditioner in closed areas such as inner building  
with cooling operation, and result in trouble with the unit.  
See the illustration below.  
Awning  
85mm  
min.  
300mm  
200mm  
500mm  
Fence, wall  
or other  
obstacle  
500mm  
500mm  
Approx.3  
˚
750mm  
150mm min.  
If the wall is greater than 150mm thick,  
cut the wall back on a 45˚ angle if possible.  
45˚  
45˚  
100mm or more  
E-14  
Installation of the Drain Tube  
Rear  
Fix the drain tube as shown in the figure.  
Rubber cap  
Gasket  
Drain Tube  
Screws(2EA)  
Installation of the Drain Pan  
The procedure for installing the drain pan should be determined by the  
condition of the installing area.  
In the case of an area where the drain pan can not be directly  
installed on the rear side of the unit after installing the air conditioner.  
Example: High storage  
Open the front grille ; refer to page 11.  
1
2
Screw  
Front grille  
Remove the screw located at the lower section of the front grille.  
It is secured in the  
section depending on the model.  
Remove the front panel.  
3
3-1 Press both sides of the cabinet in the direction of the arrow  
as shown in the figure.  
3-2 Pull the lower part of the front panel slightly forward.  
(below three inches/7cm)  
3-3 Lift the front panel upward.  
Applying excessive force to remove the front panel  
Front panel  
may cause damage to the tab ; be sure not to use  
excessive force.  
Remove two screws on the lower, right and left sides of the unit.  
4
5
Remove the chassis from the cabinet.  
Remove the rubber cap inserted into the basepan.  
6
7
Fix the drain pan as shown in the figure, and then connect the drain hose.  
(You can use any commercially-available drain hose.)  
Install the cabinet at the specified area after installing the drain pan,  
and then re-assemble it in the original condition.  
8
Screw  
Secure the front panel to the case by replacing the screw removed in  
step 2. If a screw not removed in step 2, secure the panel with a  
supplied screw.  
Rear  
Rubber cap  
Drain Hose  
In the case of an area where the drain pan can be directly installed  
on the rear side of the unit after installing the air conditioner.  
Drain Pan  
Follow steps 6 and 7 only  
1
Bottom-Side View with  
Drain Pan and Hose in Place  
E-15  
THIS AIR CONDITIONER IS MANUFACTURED BY:  
ELECTRONICS  
Printed in Korea  

Xerox Docucolor 252 User Manual
Sanyo 24ks62r User Manual
Philips Scb5650nb User Manual
MIELE G 841 PLUS User Manual
KENWOOD PROTALK LT PKT 23 User Manual
Hampton Bay Thermostatic Remote Control User Manual
CRAFTSMAN 536.886260 1 User Manual
BLACK DECKER TS2020 User Manual
ASUS X541U User Manual
ACER ASPIRE 3050 User Manual