Rabbit Air Minusa2 Spa 780a User Manual

By providing your product and purchase information, we can confirm the date of purchase  
to secure your warranty. This confirmation serves as security in the event that your original  
proof of purchase is lost, or in case your unit needs any servicing in the future.  
Your model number, serial number, and other information will be kept in our files.  
Please complete and return this registration within 30 days from purchase in order to receive  
our 5 Year Limited Warranty.  
03  
04  
SAFETY INSTRUCTIONS  
WARNING: When using electrical appliances, basic precautions  
should always be followed to reduce the risk of fire, electric shock,  
and injury to persons, including the following:  
Always unplug the RabbitAir  
MinusA2 Air Purifier before  
cleaning it.  
General Safety Instructions  
Do not place heavy objects on top  
of power cord.  
Installation Guidelines  
To reduce the risk of electric shock, the RabbitAir MinusA2 Air Purifier  
The RabbitAir MinusA2 Air  
has a polarized plug. There is only one way for the plug to fit into a  
polarized outlet. If the plug does not fit into the outlet, reverse the plug. If  
it still does not fit, contact qualified personnel to install the proper outlet.  
Do not alter the plug in any way.  
Purifier is not intended for use in  
bathrooms, laundry areas and  
other damp indoor environments.  
Keep the Air Purifier away from  
water at all times. Never place the  
unit anywhere near bathtubs or  
sinks.  
Always keep the plug clean. Do NOT use Benzene or gasoline to clean  
the plug.  
Do not place the RabbitAir  
Do not use the power cord to lift,  
pull, carry or drag the RabbitAir  
MinusA2 Air Purifier on top of  
ANY electrical appliances.  
MinusA2 Air Purifier. Avoid  
pulling the power cord against or  
around sharp corners or edges.  
05  
06  
SAFETY INSTRUCTIONS  
WARNING: When using electrical appliances, basic precautions  
should always be followed to reduce the risk of fire, electric shock,  
and injury to persons, including the following:  
Place the unit on a level area.  
Do not apply force to the unit.  
Installation Guidelines  
Do not use the unit on its side.  
Do not install the RabbitAir  
MinusA2 Air Purifier in  
places that tend to produce oily  
residue such as kitchens.  
Cautions Concerning the Operation of RabbitAir  
MinusA2 Air Purifier.  
Do not expose the RabbitAir  
Unplug the RabbitAir MinusA2  
MinusA2 Air Purifier to direct  
Air Purifier immediately if it makes  
a strange noise or produces an  
odd smell.  
sunlight. Avoid leaving the  
remote control in direct sunlight.  
Heat may interfere with remote  
control signals.  
Contact Rabbit Air for assistance.  
Leave at least 2 inches of space  
between the wall and the  
Do not block the intake and air  
outlet.  
RabbitAir MinusA2 Air Purifier.  
Leave at least 2 feet of space  
between the ceiling and the  
Do not use the unit on or around hot  
objects such stoves and heating vents.  
RabbitAir MinusA2 Air Purifier.  
Do not use the unit where it may  
come into contact with steam.  
07  
08  
SAFETY INSTRUCTIONS  
WARNING: When using electrical appliances, basic precautions  
should always be followed to reduce the risk of fire, electric shock,  
and injury to persons, including the following:  
Do not operate the unit without the filters. Do not wash & reuse any  
filters except for the electrostatic pre-filter. When transporting the unit,  
always hold the handle on the back of the unit.  
Cautions Concerning the Operation of RabbitAir  
MinusA2 Air Purifier.  
When the RabbitAir MinusA2 Air  
Purifier is turned on, do not put  
anything in the opening of the unit.  
Keep your body parts, hair, jewelry,  
or any parts of your clothing away  
from the opening.  
Do not use the RabbitAir MinusA2 Air  
Purifier near fireplaces or in areas where  
flammable or combustible products or  
vapors may be present.  
Please observe extreme caution when  
Do not use detergent or soap to clean  
the unit.  
the RabbitAir MinusA2 Air Purifier is  
used by or near children.  
Do not insert fingers or foreign objects  
into the particle sensor.  
09  
10  
FEATURES  
Wall-Mountable Design (Optional)  
Excellent Air Purification  
The RabbitAir MinusA2 Air Purifier is wall-  
6-Stages of air purification. RabbitAir  
mountable.  
MinusA2 Air Purifier is effective against  
allergens, mold, bacteria & viruses.  
Pollen Mode  
Pollen Mode is designed for optimal indoor air  
circulation and the rapid removal of pollutants.  
Specially designed for people who are  
sensitive to allergy triggers such as pollen,  
dust and other allergens in the air. Particularly  
effective when high levels of pollen are  
present, such as in the springtime.  
Strong Deodorization  
Charcoal based Activated Carbon Filters  
capture airborne chemicals, VOCs (Volatile  
Organic Compounds) and odors. VOCs are  
often generated by off-gassing from carpets,  
composite wood, furniture and other materials  
in the home.  
Silent Mode  
A light sensor on the unit detects when your  
house is dark and automatically switches into  
Silent (Sleep) Mode.  
Negative Ion Generation  
RabbitAir MinusA2 Air Purifier produces  
millions of healthy "negative ions," present in  
natural environments such as forests and  
mountains, to improve and freshen the air you  
breathe.  
Safety Design  
For safety purposes, the unit automatically  
switches off when the font panel is removed.  
Auto Mode Operation  
In Auto Mode, the speed of the fan  
automatically changes to a higher speed when  
the particle sensor detects impurities in the air.  
Mood Light  
Mood Light helps to normalize blood  
pressure, pulse, and faciliate deep  
breathing, which puts a person in a state  
of long-lasting calm & relaxation.  
Remote Control  
Quiet Mode  
Using this sleek remote control, you can  
conveniently manage the air purifier from  
wherever you are in the house.  
To reduce noise level, the fan functions at its  
lowest speed in Quiet Mode.  
11  
12  
PART NAMES  
Front View of Air Purifier  
Back View of Air Purifier  
Handle  
Mood Light  
Power cord  
Unit Hanger ▶  
Ventilation ▶  
Grille  
Control Panel/  
Display Panel  
Remote control  
Particle Sensor  
Light Sensor  
Power  
Speed  
Mode  
Mood Light  
Air Quality Indicator  
Battery (AAA size)  
13  
14  
OPERATION PART  
INDICATION PART  
POLLEN  
QUIET  
Auto Mode indicator  
Fan Speed Indicator  
Indicates the fan speed of the Air  
Purifier.  
The lowest speed is Silent.  
The highest speed is Turbo.  
When Auto Mode is selected, the  
fan speed of the air purifier changes  
automatically depending on the  
amount of impurities in the air as  
detected by the particle sensors and  
the mood light turns blue.  
Power  
Press and hold the power button for 2  
seconds to turn off the unit.  
Speed  
Pollen Mode Indicator  
Brightness Indicator  
POLLEN  
QUIET  
There are five speeds. Operation speed  
changes in the following order as you press  
the speed button.  
When Pollen Mode is selected,  
the fan speed of the air purifier  
changes fan speeds (silent>low>  
medium>high) every 70 seconds,  
while the mood light changes in  
the following pattern blue>  
purple>light purple>pink every  
second.  
When the Brightness Indicator and the  
Sleep Mode are both on, the Mood  
Light turns off automatically.  
When the Brightness Indicator is off  
and the Sleep Mode is on, the Mood  
Light shines half as bright.  
Silent > Low > Medium > High > Turbo  
Mode  
Sleep Mode Indicator  
There are three operation modes. The mode  
changes in the following order as you press  
the mode button: Auto >Quiet >Pollen  
This indicates that the unit is  
operating in the silent mode.  
Quiet Mode Indicator  
When Quiet Mode is selected, the  
fan speed of the air purifier  
automatically switches to the  
lowest setting and the Mood Light  
turns purple.  
Air Quality Indicator  
Mood Light  
This indicates the current level of air  
quality in the room. The colors  
representing the air quality level are  
blue>purple>light purple>red.  
Blue represents good air quality,  
while red represents poor air quality.  
The color of the Mood Light on the front panel  
changes according to the mode of operation.  
Mood Light  
The Mood Light has four colors: blue,  
purple, light purple and pink.  
15  
16  
NAMES OF INTERNAL FILTERS  
Negative Ions  
The air purifier produces millions of healthy "negative ions" to improve  
the air you breathe and freshen your indoor environment through the  
use of an ion generator inside of the unit.  
Filter Case  
The filter case is designed to hold the Nano-Silver Pre-Filter, Medium  
Filter, BioGSTM HEPA Filter, Customized Filter and Charcoal-based  
Activated Carbon Filter.  
Nano-Silver Pre-Filter  
The Nano-Silver Pre-Filter destroys germs and collects pet hair, large  
allergens and dust.  
Anti-Bacterial Medium Filter  
The anti-bacterial Medium Filter traps particles, mold, and bacteria  
larger than 1. It also extends the lifespan of the HEPA Filter.  
BioGSHEPA Filter  
“Next Generation” HEPA Filter made from bio-engineered fiber traps  
and destroys the allergens such as pet dander, dust mite and pollen  
which accumulate on the filter.  
Customized Filters  
There are three customized filters designed for specific needs.  
·Toxin Absorber - eliminates toxic formaldehyde & offgassing from  
materials such as new furniture, carpet & paint.  
·Germ Defense - protects against germs, mold, and bacteria such  
as Legionella.  
·Pet Allergy- traps pet dander, destroys influenza virus & bacteria.  
Charcoal Based Activated Carbon Filter  
The Charcoal-based Activated Carbon Filter efficiently removes  
VOC’s, common household odors and chemicals.  
17  
18  
PREPARATIONS  
OPERATION  
RabbitAir MinusA2 Air Purifier is designed for residential use only.  
This unit is designed for residential use only.  
To maintain the quality of the filters, they are packaged in plastic.  
Please remove the filters from the plastic bags before using the unit.  
Lock the filter case in place on the unit.  
Auto Mode Operation  
Attach the Pre - Filter to the filter case by aligning the filter with the hooks of the case.  
The non-woven fabric of the Customized Filter should face the front of the unit.  
Press the power button, the auto mode would turn on and mood light turns blue.  
Plug the unit into a 110/120V outlet.  
To remove the filter case, pull the  
bottom of the front panel and lift.  
Then take out the filter case.  
Press the power button, the air  
purifier is now in auto mode.  
Remove the packing materials from  
the filters and reload the filters in the  
following order:  
Nano-Silver Pre-Filter, Medium Filter,  
BioGS HEPA filter, Customized Filter  
and Charcoal  
AC Filter.  
The Air Quality Indicator changes  
based on the amount of impurities in  
the air and the fan speed adjusts  
accordingly.  
To place filter case back into the unit, lock  
the bottom of the filter case into the unit  
first and then the top. Finally, place the  
front panel  
back to the  
unit with the  
top first.  
19  
20  
OPERATION  
Manual Operation  
Mode Operation  
To operate the unit manually, press the speed button after turning on the unit.  
After turning on the unit, press the mode button  
Plug the unit into a 110/120V outlet.  
Plug the unit into a 110/120V outlet.  
Press the power button, the air purifier  
should be in auto mode the first time  
it’s plugged in.  
Press the power button to turn on  
the unit. The unit stays in the same  
mode it was in the last time the unit  
was turned off.  
Press the speed button to change the  
speed. The speed will not change until  
you adjust it.  
The 3 modes of operation are:  
Pollen, Quiet and Auto.  
Press the button to select the speed.  
There are five speeds to choose from,  
Silent, Low, Medium, High and Turbo.  
21  
22  
OPERATION  
How Does Sleep Mode Work?  
How Do I Change the Particle Sensitivity Level?  
When the Silent Mode is turned on, the fan speed of the Air Purifier  
automatically changes to lowest, which minimizes the energy  
consumption and noise level.  
You may need to adjust the sensitivity level if the air quality indicator is BLUE  
(good air quality) when the air in the room does not seem good or RED (bad air  
quality) even after 2 hours of operation.  
Light sensor detects the brightness of  
Press and hold both the speed and  
mode button for 3 seconds.  
the surrounding room. Unit automatically  
switches to Silent Mode three minutes  
after darkness is detected.  
The Air Quality Indicator and Auto Mode  
Indicator will blink.  
In order to operate in Silent Mode, the  
Unit must be switched to Auto or Quiet  
Mode.  
Press and hold the speed button to  
choose the sensitivity level.  
Pollen : Low  
Quiet : Standard (Default)  
Auto : High  
Sleep Mode Indicator turns on in Silent  
Mode, which automatically switches off  
Mood Light and Air Quality Indicator.  
Press and hold the speed and mode  
button for 3 seconds to save the  
sensitivity level. If no action is taken for  
10 seconds, the sensitivity level saves  
itself automatically.  
23  
24  
OPERATION  
CLEANING and MAINTENANCE  
Always unplug the unit before cleaning.  
Mood Light  
Cleaning the Particle Sensor  
outlet air inlet  
Recommend cleaning particle sensor every  
3 to 6 month.  
Mood light not only changes colors, but it also indicates the current  
operation mode.  
Clean the air inlet and outlet using a vacuum  
cleaner or soft brush.  
The mood light turns on automatically  
when the unit is turned on. Press the  
mood light button to turn on/off the  
mood light.  
dust outlet  
Open the particle sensor cover on the right side of  
the unit (when facing the  
unit). Use a wet cotton  
swab to clean and dry  
the lens, dust inlet and  
dust outlet.  
Press and hold the Mood Light button for 2 seconds, the Brightness Indicator  
turns on and the Mood Light turns off.  
dust inlet  
Cleaning the Air Intake and Outlet  
Clean the air intake and outlet with  
a soft brush.  
Press and hold the  
Mood Light for 2  
seconds.  
The Brightness  
Indicator goes on.  
Sleep Mode turns  
on.  
The Mood Light  
automatically turns off.  
Be careful not to drop the brush into  
the unit.  
→ Press the mood light button for 2 seconds, the Indicator turns off and the Silent Mode resumes.  
Cleaning the Negative Ion Generator  
Use a dry cotton swab to remove  
dust on the plate.  
Press and hold the  
Mood Light for 2  
seconds.  
The brightness of the  
Mood Light reduces  
by half.  
The Brightness  
Indicator turns off.  
Sleep Mode  
operation  
Be careful not to drop the cotton swab  
into the unit.  
Cleaning the Front Panel  
Remove the front panel from the  
unit and use a dry cloth or soft  
brush to dust it off.  
The color of the Mood Light changes according to  
different mode.  
Auto: Blue  
Quiet : Purple  
Pollen : Blue-Purple-Light Purple-Pink.  
Use a wet cloth if necessary but do  
not use a polisher.  
※ The mood light darkens when the Silent Mode turns on.  
25  
26  
CLEANING and MAINTENANCE  
FILTER REPLACEMENT  
Always unplug the unit before cleaning/replacing the filters.  
Cleaning the Lens on the Back of the Front Panel  
Depending on the amount of pollutants in your indoor environment, the frequency  
of replacing the filter varies.  
Remove the front panel from the unit and use  
a dry cloth, soft brush, or cotton swab to dust  
off the mood light on the back of the panel.  
When placing the filter case back into unit, make sure the bottom of the case goes  
into the unit first, and then follows the top.  
Use a wet cloth if necessary but do not use a  
polisher.  
Dry the filter completely before attaching  
it to the filter case. Load the case onto  
the unit again.  
Cleaning the Unit  
Attach the pre filter to  
the filter case by aligning  
the filter with the hooks  
of the case.  
Use a dry and soft cloth to clean the unit.  
Use a wet cloth if necessary but do not use  
a polisher.  
Replacing the Medium Filter (Every 12 Months)  
Remove the filter from the filter case.  
Cleaning the Nano-Silver Pre-Filter  
Do NOT discard the filter holder.  
Pull the bottom of the front panel to  
remove it from the unit.  
To replace the medium filter, remove the  
new filter from the plastic bag, attach it to  
the filter holder,and  
Pull the filter out as shown on the  
picture at the right.  
place it back into  
the filter case.  
Replacing the BioGS HEPA Filter (Every 12 Months)  
Remove the front panel and then the  
BioGS HEPA filter.  
Run a vacuum cleaner with a nozzle or  
brush attachment on low power  
setting along the Pre-Filter to pick up  
the dust and particles.  
27  
28  
FILTER REPLACEMENT  
Take out the new HEPA Filter from the  
plastic bag and put it into the filter case.  
Remove the new Charcoal-based  
Activated Carbon Filter from the plastic  
bag, and place the filter back into the filter  
case.  
Note: Place the filters in the following order  
Pre-Filter (top), Medium, HEPA, Customized, and AC Filter.  
Replacing the Customized Filter (Every 12 Months)  
Remove the new Customized Filter from  
the filter case. Do not discard the filter  
holder. Discard the  
Cleaning and replacement schedule  
old Customized  
Filter and do not  
store for re-use.  
Filters  
Nano-Silver Pre-Filter  
Medium  
Replacement  
Permanent/Washable  
Every 12 Months  
Every 12 Months  
Every 12 Months  
Every 12 Months  
Cleaning  
Every Month  
Not required  
Not required  
Not required  
Not required  
TM  
BioGS HEPA  
Remove the Customized Filter from the  
plastic bag. Attach the new Filter onto the  
filter holder and place it back into the filter  
case.  
Customized Filter  
Charcoal based Activated Carbon  
※ Based on 24/7 operation.  
Identify front side of custom Filter  
Toxin Absorber Germ Defense  
Pet Allergy  
Purple  
Filter  
Front(Fabric)  
Back  
Purple  
Black  
Purple  
Yellow  
Color  
Replacing the Charcoal based Activated Carbon  
Filter (Every 12 Months)  
Orange  
Remove the old Charcoal-based Activated  
Carbon Filter from the filter case. Discard the  
old AC Filter and do  
not store for re-use.  
29  
30  
TROUBLESHOOTING  
Wall-Mountable (Optional)  
Use the optional wall-mount kit to install the air purifier.  
Before calling for repair or replacement, or technical support, please review  
the list below. The problem may not be due to unit malfunction. If your  
problem is still unresolved after reviewing this guide, please call Rabbit Air  
Technical Support Team.  
<Installation>  
Place the unit at some certain distance away from the  
ceiling and the other walls as shown on the picture at  
the right.  
Be careful not to drop the front panel or filter case when  
Symptom  
replacing the filters.  
Solution  
Check  
Do not pull on the power cord.  
Is the unit plugged in?  
Plug the unit into a  
110/120V outlet.  
Drive in the screws of the hanger very tightly so that the unit will not fall off.  
The unit does  
not operate.  
Are the lights on display  
panel off?  
Press the power and  
mode button.  
Is the electricity cut off?  
Operate the unit after  
electricity is resumed.  
Disclaimer for installing wall mounted object  
Has the auto mode been  
selected?  
You can't select the  
speed when the auto  
mode is set.  
Do not attempt to install this product if you do not understand the instructions. Contact a qualified  
contractor to install the mounting brackets and call 1-888-866-8862 if you have any questions. You  
risk the possibility of damaging the Air Purifier, damaging other property and personal injury if the  
mounting brackets are not installed properly. Check to make sure there are no missing or defective  
parts. Do not attempt to assemble the mounting brackets if there are missing or defective parts.  
Contact Rabbit Air and replacement parts will be shipped to you immediately. Rabbit Air is not liable  
for damage or injury caused by incorrect mounting, incorrect assembly or incorrect usage.  
Speed will not  
change.  
You can’t select the  
speed when the silent  
mode is on.  
Is the room dark?  
Air Quality  
Indicator does  
not change  
when cigarette  
smoke is in the  
air or when the  
air is highly  
polluted.  
Is the Particle Sensor clean?  
Clean the lens.  
(Page 24)  
After installing the wall mount, make sure it is firmly in place before putting the air purifier on it.  
The biggest concern mounting on the wall is wiring in the wall. Its hard to be sure, but be careful  
not to drill or screw into any wiring.  
Does it continually indicate  
'Not Clean'?  
Lower the sensitivity.  
(Page 22)  
Correct installation is extremely essential, and falls outside the scope of responsibility of Rabbit Air.  
The fastening material provided is exclusively intended for installation on walls made of solid wood,  
bricks, concrete or solidwood columns with a maximum of 3 mm wall finishing. For walls made of  
other materials, for example hollow bricks, please consult your installer and/or specialist supplier.  
Maximum weight of air purifier SPA-780A: 9.1 kg/20lbs.  
Does it continually indicate  
'Very Clean'?  
Raise the sensitivity.  
(Page 22)  
Have you cleaned or replaced  
the filters yet?  
Check the cleaning and  
replacement schedule.  
Speed is  
too slow.  
31  
32  
SPA-780A  
LIMITED WARRANTY  
Rabbit Air warrants that your  
Air Purifier will be free from defects in material or workmanship for a  
period of Five (5) years from the date of purchase. To activate the warranty, please complete and return  
your warranty registration within 30 days of purchase of your Air Purifier to Rabbit Air. In order to ensure  
Symptom  
Check  
Solution  
unit performance, the filters should be replaced with original  
replacement filters as recommended  
in this manual (the 'Limited Warranty'). Otherwise the standard warranty time in your country applies.  
There's odor  
from the air  
outlet.  
Have you cleaned or replaced  
the filters yet?  
Check the cleaning and  
replacement schedule.  
Within the first 30 days of purchase, Rabbit Air will replace the defective unit at no additional cost and  
reimburse any shipping charges. After 30 days, Rabbit Air's obligation and liability under this Limited  
Warranty is limited to repairing or replacing (at its sole discretion) the defective unit. The Limited  
Warranty does not cover replacement filters.  
Air Quality  
Indicator  
blinks.  
Call Rabbit Air Technical Support Team.  
In the event of a malfunction or failure of your Rabbit Air  
Air Purifier, please contact Rabbit Air to  
obtain a return authorization number and the address of the service center. The return authorization  
number must be clearly written on the outside of the shipping box or the shipment may be refused.  
Unplug the unit and call Rabbit Air Technical Support Team.  
Other problems  
Your Limited Warranty remains in effect only if your  
Air Purifier:  
1. Is operated in accordance with the instruction provided.  
2. Is connected to a proper power supply (see voltage label on machine).  
3. Three is no evidence of tampering, mishandling, neglect, accidental damage, modification,  
and/or repair done to the  
Air Purifier by anyone other than authorized  
service personnel.  
4. Your warranty registration has been completed and returned to Rabbit Air.  
LIMITED AND EXCLUSIONS  
There are no express warranties except as listed above.  
THE WARRANTOR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL  
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY  
BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE  
WARRANTIES OF MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE, ARE  
LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.  
Some states do not allow the exclusion or limitation of incidental or consequential damages, or  
limitation of incidental or consequential damages, or limitations on how long an implied warranty  
lasts, so the above exclusions or limitations may not apply to you.  
The Energy Star Label and disclaimer:  
This warranty gives you specific legal rights and you may also have other rights which vary from  
state to state.  
If a problem with the product develops during the warranty period, we will repair or replace it  
without charge to you. A shipping and processing fee may apply. To obtain service under  
warranty, please contact Rabbit Air at 1-888-866-8862 or by email at [email protected]  
The energy efficiency of this ENERGY STAR qualified model is measured based on a  
ratio between the model’s CADR for Dust and the electrical energy it consumes, or  
CADR/Watt.  

York Predator 150 User Manual
Xerox 685 User Manual
Toshiba Ras 13ykv E User Manual
Simplicity Sac8017ee User Manual
MAKITA GA7050 02 User Manual
MAKITA FS6300R User Manual
LG 17MB15P User Manual
CRAFTSMAN 917.274632 User Manual
BLACK DECKER BSV2020P User Manual
AT&T TL96487 User Manual