Psc Magellan 1000i User Manual

Magellan® 1000i  
Omni-Directional Imaging Scanner  
Quick Reference Guide  
Guida Rapida Guide de Référence Rapide  
Guía de Referencia Rápida  
Schnellanleitung Referência Rápida  
English .......................................................... 1  
Francais ......................................................... 5  
Deutsch ......................................................... 9  
Italiano ......................................................... 13  
Español ....................................................... 17  
Portugues .................................................... 21  
Chinese ....................................................... 25  
Japanese ..................................................... 29  
Quick Reference Guide  
i
®
ii  
Magellan 1000i  
PSC INC. MAGELLAN® END USER LICENSE  
AGREEMENT  
Notice to End User: The PSC Product you have acquired contains embedded Software,  
which is integral to the product’s operation. This Software is being provided to you  
under license, subject to the terms and conditions of this Agreement. If you use the PSC  
Product, you will be deemed to have accepted the terms and conditions of this Agree-  
ment. If you do not intend to be bound to the terms of this Agreement, PSC is not willing  
to license the Software to you, you may not use the PSC Product or the Software, and  
you must contact the party from whom you acquired the PSC Product for instructions.  
This End User Software License Agreement (“Agreement”) is a legally binding agreement gov-  
erning the licensing of the Software and Documentation by PSC Inc. and its wholly owned sub-  
sidiaries and affiliates (“PSC”) to the entity or person who has purchased or otherwise acquired  
a PSC Product (“End User”). For purposes of this Agreement, any software that is associated  
with a separate end-user license agreement is licensed to you under the terms of that license  
agreement. PSC and End User hereby agree as follows:  
1. Definitions.  
1.1  
"Documentation" means materials such as user’s guides, program reference guides,  
quick reference guides, manuals, or similar materials associated with or related to the  
PSC Product, whether in printed, “online”, or other form.  
1.2  
"Proprietary Information" means: (a) source code, object code, software, documentation,  
and any related internal design, system design, data base design, algorithms, technol-  
ogy, technical data or information, implementation techniques, and trade secrets related  
to the Software, (b) any other trade secrets marked appropriately or identified as propri-  
etary or confidential, and (c) any information that End User, under the circumstances,  
should recognize as confidential. Proprietary Information does not include any informa-  
tion that the receiving party can establish was (1) in the public domain, (2) already in the  
receiving party’s possession or rightfully known prior to receipt, (3) rightfully learned from  
a third party not in violation of any other's proprietary rights, or (4) independently devel-  
oped without access to Proprietary Information.  
®
®
1.3  
1.4  
“PSC Product” means the PSC Magellan 9500 series, Magellan 8500 series, Magel-  
®
®
®
lan 8200 series, Magellan 8100 series, and/or Magellan SL series scanner and/or  
scanner/scale product, including all embedded Software in and all Documentation  
related to such product, which has been purchased or otherwise acquired by End User,  
whether obtained directly or indirectly from PSC.  
"Software" means any software or computer programs of PSC or its third party licensors  
in machine readable form which is embedded in the PSC Product, whether obtained  
directly or indirectly from PSC, including any replacement, update, upgrade, enhance-  
ment or modification.  
2. Scope Of License Granted.  
2.1  
PSC grants to End User a non-exclusive, non-transferable, perpetual license to use the  
Software, solely on the PSC Product in which it is embedded (“designated PSC Prod-  
uct”), in machine-readable form only, solely for End User's internal business purposes.  
This Agreement does not convey ownership of the Software to End User. Title to the  
Software shall be and remain with PSC or the third party from whom PSC has obtained a  
licensed right. As used in this Agreement, the term “purchase” or its equivalents when  
applied to the Software shall mean “acquire under license. End User is not entitled to  
receipt or use of the source code to any Software.  
2.2  
End User shall not copy, modify, decompile, disassemble, reverse engineer, or otherwise  
reproduce or remanufacture the Software, whether modified or unmodified, nor sell,  
assign, sublicense, distribute, lend, rent, give, or otherwise transfer the Software to any  
other person or organization, for purposes other than as expressly provided in this  
Agreement, without PSC’s prior written consent.  
3. Transfers, Support.  
3.1 Any copying, installing, reproduction, remanufacture, reverse engineering, electronic  
transfer, or other use of the Software on other than the designated PSC Product will be a  
Quick Reference Guide  
i
material breach of this Agreement. However, PSC may elect not to terminate this Agree-  
ment or the granted licenses, but instead may elect to notify End User that End User is  
deemed to have ordered and accepted a license for each breaching use. End User shall  
pay PSC the applicable list price for such licenses as of the date of such breach.  
3.2  
3.3  
End User shall not sell, assign, sublicense, distribute, lend, rent, give, or otherwise trans-  
fer the PSC Product to any third party unless such third party agrees with PSC in writing  
to be bound by the terms and conditions of this Agreement. Any such transfer of the  
PSC Product absent such agreement shall be null and void.  
End User may obtain support for Software from PSC at PSC’s standard support fees and  
under PSC’s standard support terms and conditions in effect at the time the support is  
requested.  
4. Intellectual Property.  
End User acknowledges that the Software constitutes valuable trade secrets of PSC or PSC’s  
third party licensors and that the Software is protected by intellectual property laws and treaties.  
The license set forth in this Agreement does not transfer to End User any ownership of PSC’s or  
its third party licensors' copyrights, patents, trademarks, service marks, trade secrets, or other  
intellectual property rights and End User shall have no right to commence any legal actions to  
obtain such rights. End User shall not remove, modify, or take any other action that would  
obscure any copyright, trademark, patent marking, or other intellectual property notices con-  
tained in or on the PSC Product.  
5. Proprietary Information.  
5.1  
End User acknowledges that Proprietary Information is the confidential, proprietary, and  
trade secret property of PSC and PSC’s third party licensors and End User acquires no  
right or interest in any Proprietary Information.  
5.2  
End User shall not disclose, provide, or otherwise make available the Proprietary Infor-  
mation of PSC or its third party licensors to any person other than End User’s authorized  
employees or agents who are under confidentiality agreement, and End User shall not  
use the Proprietary Information other than in conjunction with use of the PSC Product  
exclusively for End User’s internal business purposes. End User shall take steps to pro-  
tect the Proprietary Information no less securely than if it were End User's own intellec-  
tual property.  
5.3  
The provisions of this Proprietary Information Section shall survive and continue for five  
(5) years after the termination of this Agreement.  
6. Limited Warranty.  
6.1 PSC warrants that, under normal use and operation, the PSC Product will conform sub-  
stantially to the applicable Documentation for the period specified in the Documentation.  
During this period, for all reproducible nonconformities for which PSC has been given  
written notice, PSC will use commercially reasonable efforts to remedy nonconformities  
verified by PSC. End User agrees to supply PSC with all reasonably requested informa-  
tion and assistance necessary to help PSC in remedying such nonconformities. For all  
defects reported to PSC within the warranty period, PSC’s liability is limited to providing  
End User with one copy of corrections or responding to End User's problem reports  
according to PSC's standard assistance practices. PSC does not warrant that the prod-  
uct will meet End User's requirements or that use of the product will be uninterrupted or  
error free, or that PSC's remedial efforts will correct any nonconformance. This limited  
warranty does not cover any product that have been subjected to damage or abuse,  
whether intentionally, accidentally, or by neglect, or to unauthorized repair or unautho-  
rized installation, and shall be void if End User modifies the product, uses the product in  
any manner other than as established in the Documentation, or if End User breaches any  
of the provisions of this Agreement.  
6.2  
EXCEPT AS PROVIDED IN THIS AGREEMENT, THE PSC PRODUCT IS PROVIDED  
“AS IS” AND PSC MAKES NO WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED,  
WRITTEN OR ORAL, WITH RESPECT TO THE PRODUCT, AND SPECIFICALLY DIS-  
CLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE.  
7. Infringement.  
7.1  
PSC will defend End User against any claim in a lawsuit that the PSC Product furnished  
hereunder infringe a United States patent or copyright of a third party and PSC will pay  
any damages finally awarded against End User by a court of competent jurisdiction that  
®
ii  
Magellan 1000i  
are attributable to such claim or will pay End User’s part of any settlement that is attribut-  
able to such claim, provided, that 1) End User notifies PSC promptly in writing of the  
claim, 2) PSC controls the defense or settlement of the claim, and 3) End User cooper-  
ates fully with PSC in such defense or settlement. All notices of a claim should be sent to  
PSC Inc., Legal Department, 111 SW Fifth Ave. Suite 4100, Portland, OR 97204-3644.  
7.2  
7.3  
7.4  
In the defense or settlement of any such claim, PSC may, at its option, 1) procure for End  
User the right to continue using the PSC Product, 2) modify the PSC Product so that it  
becomes non-infringing, 3) replace the PSC Product with an equivalent product not sub-  
ject to such claim, or 4) provide End User an opportunity to return the PSC Product and  
receive a refund of the purchase price paid, less a reasonable allowance for use.  
PSC shall have no liability to End User for claims of infringement based upon 1) the use  
of any PSC Product in combination with any product which PSC has not either furnished  
or authorized for use with such PSC Product 2) the use of any PSC Product designed,  
manufactured, or modified to the specifications of End User, or 3) End User’s modifica-  
tion of the PSC Product without written authorization from PSC.  
THE FOREGOING STATES PSC’S COMPLETE AND ENTIRE OBLIGATION CON-  
CERNING CLAIMS OF PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROP-  
ERTY INFRINGEMENT, CANCELS AND SUPERCEDES ANY PRIOR AGREEMENTS,  
WHETHER ORAL OR WRITTEN, BETWEEN THE PARTIES CONCERNING SUCH  
CLAIMS, AND WILL NOT BE MODIFIED OR AMENDED BY ANY PAST, CONTEMPO-  
RANEOUS, OR FUTURE AGREEMENTS OR DEALINGS BETWEEN THE PARTIES,  
WHETHER ORAL OR WRITTEN, EXCEPT AS SET FORTH IN A FUTURE WRITING  
SIGNED BY BOTH PARTIES.  
8. Limitation Of Liability.  
EXCEPT AS PROVIDED IN SECTION 7, PSC SHALL NOT BE LIABLE FOR ANY CLAIMS  
AGAINST END USER BY ANY OTHER PARTY. IN NO EVENT SHALL PSC'S LIABILITY FOR  
DAMAGES, IF ANY, WHETHER BASED UPON CONTRACT, TORT (INCLUDING NEGLI-  
GENCE), PRODUCT LIABILITY, STRICT LIABILITY, WARRANTY, OR ANY OTHER BASIS,  
EXCEED THE PRICE OR FEE PAID BY END USER FOR THE PSC PRODUCT. UNDER NO  
CIRCUMSTANCES SHALL PSC BE LIABLE TO END USER OR ANY THIRD PARTY FOR  
LOST PROFITS, LOST DATA, INTERRUPTION OF BUSINESS OR SERVICE, OR FOR ANY  
OTHER SPECIAL, CONSEQUENTIAL, CONTINGENT, INDIRECT, INCIDENTAL, PUNITIVE,  
EXEMPLARY, OR OTHER SIMILAR DAMAGES, EVEN IF PSC HAS BEEN ADVISED OF THE  
POSSIBILITY OF SUCH DAMAGES.  
9. Government Restricted Rights; International Use.  
9.1  
Use, duplication, or disclosure of the Software by the U.S. Government is subject to the  
restrictions for computer software developed at private expense as set forth in the U.S.  
Federal Acquisition Regulations at FAR 52.227-14(g), or 52.227-19 or in the Rights in  
Technical Data and Computer Software clause at DFARS 252.227-7013(c)(1)(ii), which-  
ever is applicable.  
9.2  
If End User is using the PSC Product outside of the United States, End User must com-  
ply with the applicable local laws of the country in which the PSC Product is used, with  
U.S. export control laws, and with the English language version of this Agreement. The  
provisions of the “United Nations Convention on International Sale of Goods” shall not  
apply to this Agreement.  
10. Termination.  
10.1 Either party may terminate this Agreement or any license granted under this Agreement  
at any time upon written notice if the other party breaches any provision of this Agree-  
ment.  
10.2 Upon termination of this Agreement, End User immediately shall cease using any non-  
embedded software and shall return to PSC or destroy all non-embedded software cov-  
ered by this Agreement, and shall furnish PSC with a certificate of compliance with this  
provision signed by an officer or authorized representative of End User. For embedded  
software, End User agrees to sign a waiver prepared by PSC concerning further use of  
the embedded Software. End User’s resumed or continued use of the embedded Soft-  
ware after termination shall constitute End User’s agreement to be bound by the terms  
and conditions of this Agreement for such use.  
11. General Provisions.  
11.1 Entire Agreement; Amendment. This document contains the entire agreement between  
Quick Reference Guide  
iii  
the parties relating to the licensing of the Software and supersedes all prior or contempo-  
raneous agreements, written or oral, between the parties concerning the licensing of the  
Software. This Agreement may not be changed, amended, or modified except by written  
document signed by PSC.  
11.2 Notice. All notices required or authorized under this Agreement shall be given in writing,  
and shall be effective when received, with evidence of receipt. Notices to PSC shall be  
sent to the attention of Contract Administration, PSC Scanning Inc., 959 Terry Street,  
Eugene, OR 97402, or such other address as may be specified by PSC in writing.  
11.3 Waiver. A party’s failure to enforce any of the terms and conditions of this Agreement  
shall not prevent the party’s later enforcement of such terms and conditions.  
11.4 Governing Law; Venue:This Agreement and the rights of the parties hereunder shall be  
governed by and construed in accordance with the laws of the State of Oregon U.S.A,  
without regard to the rules governing conflicts of law. The state or federal courts of the  
State of Oregon located in either Multnomah or Lane counties shall have exclusive juris-  
diction over all matters regarding this Agreement, except that PSC shall have the right, at  
its absolute discretion, to initiate proceedings in the courts of any other state, country, or  
territory in which End User resides, or in which any of End User's assets are located.  
11.5 Attorneys’ Fees. In the event an action is brought to enforce the terms and conditions of  
this Agreement, the prevailing party shall be entitled to reasonable attorneys’ fees, both  
at trial and on appeal.  
- END -  
®
iv  
Magellan 1000i  
Quick Reference  
This guide is provided to help get your installation up-and-run-  
ning quickly and efficiently. For more details, including program-  
ming information, reference the Product Reference Guide (PRG),  
which is available for viewing and download from the PSC web-  
site listed on the back cover of this manual.  
Installation  
Route the interface cable from the terminal or host. Plug the AC  
adapter (if one is used) into a wall outlet and the interface (I/F)  
cable, then route and attach the I/F cable to the scanner. Verify  
operation by presenting known-good bar codes to the scanner.  
The unit should beep1 and/or flash its good read LED and send  
the bar code data to the host or terminal. If not, refer to the Trou-  
bleshooting section of this guide.  
Scanner installation is complete.  
For 220-230 VAC  
I/F Cable  
To Host/Terminal  
adapters, the  
cord must be  
facing down as  
shown in the  
illustration. If  
Connect  
Here  
installed upwards,  
it will pose an  
undue strain on the  
socket outlet.  
A/C Adapter  
(if needed)  
1. Beeper and LED behavior is selectable and may have been disabled  
by a previous user.  
Quick Reference Guide  
1
 
Optional Stand  
An optional stand is available for the scanner which can be  
permanently attached to a wall or countertop. After locating the  
stand in an optimal position, the scanner (along with the stand)  
can be detached for portable use by lifting the entire unit as  
shown below.  
Power Supply  
Some models require1 either a Listed Class 2 or Listed LPS power  
source which supplies power directly to the unit.  
How to Scan  
Bar codes can be presented to the scanner while it is resting on  
the counter or in the optional stand, or the scanner/mount can be  
lifted and held as shown.  
Switch Option Shown  
*Optional Stand  
1. Power Off the Terminal (POT) units do not require a power supply.  
®
2
Magellan 1000i  
Targeted Scanning Mode  
In order to read a bar code (switch option only)...  
press and hold the switch. An aiming pattern will  
appear.  
with the aiming pattern fairly centered over the bar code  
to be read, release the switch to read the label.  
The scanner will not read bar codes while the  
switch is pressed.  
Targeted Scanning Mode will read bar codes  
in any orientation.  
The scanner will return to full pattern Omni  
NOTE  
Mode after a configurable time has elapsed.  
Troubleshooting  
If the scanner is not operating properly, the following checks  
should be performed:  
1. If the scanner uses an external power supply and the external  
power supply has failed, the scanner will not operate.  
Exchange the power supply with a known good power sup-  
ply and retest operation.  
4
1
2
5
3
2. Verify the interface cable is securely attached to the host.  
Consult your technical support personnel or refer to your  
host system manual to verify the proper connection for the  
scanner.  
Quick Reference Guide  
3
3. Verify that the interface cable is securely attached to the scan-  
ner.  
4. Check that the bar codes are of sufficient quality to be recog-  
nized by the scanner. Wrinkled, smudged, or torn labels can  
cause the scanner to not read at all. Scan known-good labels  
of an active symbology1 to check the scanner's read opera-  
tion.  
5. Ensure that the scanner's interface type is compatible with  
the host terminal by consulting your POS system manual  
and/or the Product Reference Guide.  
If the scanner still does not function properly, contact your local  
supplier or PSC Customer Support Services.  
Compliance Statement  
This device complies with Part 15 rules. Operation is subject to  
the following conditions:  
1. This device may not cause harmful interference; and  
2. This device must accept any interference received, including  
interference that may cause undesired operation.  
This Class A digital apparatus complies with Canadian ICES -003.  
Cet appareil numérique de la classe A est confrome à la norme NMB-003 du  
Canada.  
LED Class  
CLASS 1 LED PRODUCT  
APPARECCHIO LED CLASSE 1  
APPAREIL A LED DE CLASSE 1  
EN60825-1  
LED KLASSE 1  
1. Reading of the various bar code symbologies can be independently  
enabled or disabled in the scanner.  
®
4
Magellan 1000i  
Guide de Référence Rapide  
Ce guide est fourni afin de vous aider à installer rapidement et efficace-  
ment votre lecteur de codes à barres. Pour plus de détails concernant les  
informations sur la programmation, consultez le Guide de Référence du  
Produit qui est disponible soit pour lecture soit pour téléchargement à  
partir du site Internet PSC indiqué au dos de ce manuel.  
Installation  
Acheminez le câble d'interface à partir du terminal ou de l'ordinateur  
hôte. Branchez l'adaptateur CA (courant alternatif) (s'il est nécessaire  
d'en utiliser un) à une prise du mur et le câble d'interface (I/F), ensuite  
acheminez et connectez le câble I/F au scanner. Vérifiez l'opération en  
présentant au scanner des codes à barres corrects. l'unité devrait émettre  
1
un bip sonore et/ou faire clignoter la diode pour confirmer que la saisie  
est correcte et envoyez les données du codes à barres à un ordinateur hôte  
ou au terminal. Si ce n'est pas le cas, consultez la section Diagnostic de  
Pannes de ce guide.  
L'installation du scanner est terminée.  
Pour les  
A l'ordinateur  
hôte/Terminal  
Câble d'Interface  
adaptateurs 220-  
230 VCA, le cordon  
doit être face vers le  
bas comme montré  
sur l'illustration. S'il  
est installé vers la  
haut, ceci provoque  
une tension  
Adaptateur CA  
(si nécessaire)  
Connectez  
ici  
excessive au niveau  
de la prise.  
1. Le bip sonore et le clignotement de la diode LED peuvent être sélec-  
tionnés et peuvent avoir été désactivés par un utilisateur précédent.  
Guide de Référence Rapide  
5
 
Support Facultatif  
Un support facultatif est disponible pour le scanner qui peut être fixé en  
permanence à un mur ou à un comptoir. Après avoir placé le support  
dans une position optimale, le scanner (ainsi que le support) peuvent  
être détachés pour un usage portatif en levant l'unité complète comme  
illustré ci-dessous.  
Alimentation Électrique  
1
Certains modèles exigent une source d'alimentation avec courant de  
sortie de Classe 2 ou à puissance limitée (LPS) qui fournit l'électricité  
directement à l'unité.  
Comment Scanner  
La lecture peut être en mode mains libres pour les pièces faciles à  
manipuler ou à la main pour les pièces plus encombrantes.  
Bouton pour mode ciblée  
*Support Facultatif  
1. Les unités de mise hors tension du terminal n'exigent aucune alimen-  
tation électrique.  
®
6
Magellan 1000i  
Mode Saisie Ciblée  
Afin de saisir un code-barre (option commutation uniquement)...  
appuyez et maintenez la pression sur le bouton de commuta-  
tion. Un rayon de visée apparaîtra.  
centrez bien le rayon de visée au-dessus du codes à barres qui  
doit être saisi, puis relâchez le bouton pour lire l'étiquette.  
Le scanner ne lira pas les codes à barres tant  
que le bouton sera enfoncé. Le Mode de  
Saisie Ciblée lira les codes à barres dans  
n'importe quel sens. Le scanner retournera  
complètement en mode Omni après qu'un  
certain temps configurable se sera écoulé.  
NOTE  
Diagnostic de Pannes  
Si le lecteur ne fonctionne pas correctement, effectuez les vérifications  
suivantes :  
1. Si le lecteur utilise une alimentation électrique extérieure et que  
l'alimentation extérieure ne fonctionne pas, le lecteur ne fonction-  
nera pas. Echangez la source d'alimentation avec une autre alimen-  
tation électrique correcte et effectuez de nouveau l'opération pour  
vérification.  
4
1
2
5
3
2. Vérifiez que le câble d'interface est correctement connecté à l'ordi-  
nateur hôte/terminal. Consultez votre service technique ou référez-  
vous au manuel de votre ordinateur hôte afin de vérifier si la con-  
nexion au lecteur est correcte.  
Guide de Référence Rapide  
7
3. Vérifiez que le câble d'interface est connecté correctement au lect-  
eur.  
4. Contrôlez que la qualité des codes à barres est suffisante pour que  
ceux-ci soient reconnus par le scanner. Les étiquettes pliées, sales ou  
déchirées peuvent empêcher le scanner de lire les codes. Saisissez  
1
des étiquettes correctes avec une symbologie active afin de vérifier  
que le scanner effectue l'opération de saisie correctement.  
5. Assurez-vous que le type d'interface du scanner est compatible avec  
le terminal hôte en consultant la manuel de votre système POS et/  
ou le Guide de Référence du Produit.  
Si le lecteur ne fonctionne toujours pas correctement, contactez votre  
fournisseur local ou le Service d'Assistance Clientèle de PSC.  
Déclaration de Conformité  
Cet appareil est conforme aux Règles (PART 15 Rules) en matière  
d'émissions et d'interférences des services de la FCC. Son fonctionne-  
ment est soumis aux conditions suivantes :  
1. Cet appareil ne doit pas provoquer d'interférences nuisibles; et  
2. Cet appareil doit accepter toute interférence reçue, y compris les  
interférences qui peuvent provoquer des opérations non désirées.  
This Class A digital apparatus complies with Canadian ICES -003.  
Cet appareil numérique de la classe A est confrome à la norme NMB-003 du  
Canada.  
LED Class  
CLASS 1 LED PRODUCT  
APPARECCHIO LED CLASSE 1  
APPAREIL A LED DE CLASSE 1  
EN60825-1  
LED KLASSE 1  
PRODUIT LED CLASSE 1  
1. La lecture des différentes symbologies et de codes à barres peuvent  
être activées ou désactivées de façon indépendante.  
®
8
Magellan 1000i  
Schnellanleitung  
Diese Anleitung soll eine schnelle und effiziente Installation und  
Inbetriebnahme ermöglichen. Weitere Einzelheiten, u.a. zur Program-  
mierung, entnehmen Sie dem Produktleitfaden (Product Reference  
Guide, PRG), der zum Anzeigen und Herunterladen auf der PSC-Web-  
seite verfügbar ist (siehe Rückseite dieses Leitfadens).  
Installation  
Verlegen Sie das Interfacekabel vom Haupt- oder Endgerät. Schließen Sie  
den Netzadapter (sofern verwendet) an einer Netzsteckdose und am  
Interfacekabel (IF-Kabel) an, und verlegen Sie das IF-Kabel zum Scanner  
und schließen es daran an. Führen Sie einen Funktionstest aus, indem  
Sie mit dem Scanner garantiert funktionsfähige Barcodes einlesen. Das  
1
Gerät muss einen Piepton aussenden und/oder mit der gut sichtbaren  
LED blinken und die Barcodedaten an das End- oder Hauptgerät  
senden. Andernfalls ziehen Sie den Abschnitt zu Fehlerbehebung in  
diesem Leitfaden zurate.  
Die Scannerinstallation ist abgeschlossen.  
Zum  
End-/Hauptgerät  
Bei 220-230 V-  
Adaptern, muss  
das Kabel wie in  
der Abbildung  
Interfacekabel  
nach unten zeigen.  
Wenn es nach  
oben zeigt, wird  
die Steckdose  
Netzadapter  
(falls erforderlich)  
Hier  
anschließen  
unnötig belastet.  
1. Piepton- und LED-Verhalten können eingestellt werden und sind durch  
Vornutzer ggf. deaktiviert.  
Schnellanleitung  
9
 
Optionaler Ständer  
Zu dem Scanner gibt es einen optionalen Sockel zur dauerhaften  
Befestigung an einer Wand oder Ladentheke. Nachdem Sie den  
Sockel optimal positioniert haben, können Sie den Scanner (mit  
Sockel) für freihändigen Einsatz abnehmen, indem Sie das  
gesamte Gerät wie unten dargestellt anheben.  
Stromversorgung  
Für einige Modelle ist eine Stromversorgung mit Klasse 2- oder LPS-  
1
Zulassung für direkte Stromversorgung erforderlich .  
Scanverfahren  
Barcodes werden mit dem Scanner eingescannt, während dieser auf der  
Ladentheke steht oder am optionalen Sockel befestigt ist, oder indem der  
Scanner/die Halterung hochgehoben und wie folgt gehalten wird.  
Optionaler Schalter  
*Optionaler Sockel  
1. Für Geräte mit POT-Option (Power Off the Terminal) ist keine Strom-  
versorgung erforderlich.  
®
10  
Magellan 1000i  
Zielscanmodus  
So lesen Sie einen Barcode ein (nur optionaler Schalter):  
Schalter gedrückt halten Ein Zielmuster wird angezeigt.  
Zielmuster entsprechend über dem einzulesenden Barcode  
ausrichten und Schalter zum Scannen des Etiketts loslassen.  
Bei gedrücktem Schalter werden die Bar-  
codes vom Scanner nicht eingelesen.  
Mit dem Zielscanmodus werden Barcodes in  
jeder Ausrichtung eingelesen.  
HINWEIS  
Der Scanner wechselt nach Ablauf einer kon-  
figurierbaren Zeit wieder in den omnidirek-  
tionalen Vollmustermodus.  
Fehlerbehebung  
Bei fehlerhaftem Scannerbetrieb prüfen Sie Folgendes:  
1. Wenn der Scanner mit einer externen Stromversorgung betrieben  
wird, funktioniert er nicht, wenn diese ausfällt. Stromversorgung  
durch ein garantiert funktionsfähiges Gerät ersetzen und Betrieb  
testen.  
4
1
2
5
3
2. Sicherstellen, dass das Interfacekabel am Endgerät richtig ange-  
schlossen ist. Wenden Sie sich an Ihr zuständiges Technikpersonal  
oder ziehen Sie das Endgeräthandbuch zurate, um einen ordnungs-  
gemäßen Anschluss des Scanners sicherzustellen.  
Schnellanleitung  
11  
3. Sicherstellen, dass das Interfacekabel am Scanner richtig angeschlos-  
sen ist.  
4. Sicherstellen, dass die Barcodes ausreichende Qualität aufweisen,  
um vom Scanner erkannt zu werden. Zerknitterte, beschmierte,  
oder angerissene Etiketten machen ein Einlesen unmöglich. Scan-  
1
nen Sie garantiert gute Etiketten mit aktiver Symbologie , um die  
Einlesefunktion des Scanners zu überprüfen.  
5. Vergewissern Sie sich, dass der Schnittstellentyp des Scanners mit  
dem Endgerät kompatibel ist, indem Sie das Handbuch des POS-  
Systems und/oder den Produktleitfaden (Product Reference Guide)  
zurate ziehen.  
Wenn der Scanner weiterhin nicht ordnungsgemäß funktioniert, wenden  
Sie sich an Ihren örtlichen Händler oder an den PSC-Kundensupport.  
Erfüllung von Vorschriften  
Dieses Gerät erfüllt Teil 15 der FCC-Bestimmungen. Der Betrieb unter-  
liegt den folgenden Bedingungen:  
1. Dieses Gerät darf keine schädlichen Störungen produzieren, und:  
2. Dieses Gerät muss für den Empfang von Störungen, darunter  
Störungen, die unerwünschtes Betriebsverhalten auslösen, ausgelegt  
sein.  
Dieses Digitalgerät der Klasse A entspricht dem kanadischen Standard ICES  
-003.  
LED-Klasse  
CLASS 1 LED PRODUCT  
APPARECCHIO LED CLASSE 1  
APPAREIL A LED DE CLASSE 1  
EN60825-1  
LED KLASSE 1  
KLASSE 1 LED-PRODUKT  
1. Das Einlesen der verschiedenen Barcodesymbologien kann im Scan-  
ner unabhängig aktiviert bzw. deaktiviert werden.  
®
12  
Magellan 1000i  
Guida Rapida  
La presente guida vi aiuterà ad eseguire un'installazione rapida ed effi-  
cace. Per ulteriori dettagli, inclusi i dettagli relativi alla programmazione,  
consultare la Guida di Riferimento del Prodotto, che può essere consul-  
tata online e scaricata dal sito di PSC indicato sul retro del presente man-  
uale.  
Installazione  
Svolgere il cavo d'interfaccia dal terminale o host. Inserire l'eventuale  
adattatore CA nella presa a parete e nel cavo d'interfaccia (I/F), quindi  
collegare il cavo I/F allo scanner. Verificare il funzionamento facendo leg-  
gere allo scanner dei codici a barre dei quali si conosce il contenuto e in  
1
buono stato. L'unità emettera un suono e/o farà lampeggiare il LED che  
segnala la corretta lettura del codice e invierà i dati del codice all'host o al  
terminale. In caso contrario, consultare la sezione "Risoluzione dei prob-  
lemi" della presente guida.  
L'installazione dello scanner è completa.  
Il cavo degli  
Cavo d'interfaccia  
adattatori 220-230  
VCA deve essere  
posizionato verso il  
basso come  
All'host/terminale  
indicato  
nell'illustrazione. In  
caso contrario  
l'uscita della presa  
di corrente sarà  
sotto sforzo.  
Adattatore C  
(se necessario)  
Collegare  
qui  
1. È possibile selezionare suono oppure LED. Tenere conto della config-  
urazione impostata dall'utente che ha utilizzato lo scanner in prece-  
denza.  
Guida Rapida  
13  
 
Supporto Opzionale  
È disponibile un supporto opzionale che può essere attaccato  
permanentemente alla parete o sul bancone. Dopo aver  
posizionato il supporto in posizione ottimale, lo scanner e il  
supporto potranno essere staccati per l'utilizzo mobile sollevando  
l'intera unità come illustrato in basso.  
Alimentazione  
1
Alcuni modelli necessitano una sorgente di alimentazione Classe 2 o  
LPS che alimenti direttamente l'unità.  
Come utilizzare lo Scanner  
È possibile presentare i codici al lettore, mentre è posizionato sul ban-  
cone oppure inserito nel supporto opzionale, oppure lo scanner può  
essere sollevato come da illustrazione.  
Pulsante opzione  
*Supporto opzionale  
1. Le unità alimentate dal terminale (POT - Power Off the Terminal) non  
richiedono alimentazione di rete.  
®
14  
Magellan 1000i  
Modalità di Scansione a Bersaglio  
Per utilizzare lo scanner con il pulsante opzione:  
tenere premuto il pulsante. Apparirà un mirino luminoso.  
Posizionare il mirino luminoso al centro del codice a barre da  
leggere e rilasciare il pulsante opzione per eseguire la lettura.  
Lo scanner non legge i codici, se il pulsante è  
premuto.  
La modalità di scansione bersaglio consente  
di leggere codici orientati in qualunque verso.  
Lo scanner ritornerà in modalità Omni dopo  
NOTE  
un periodo di tempo impostabile.  
Risoluzione dei Problemi  
Nel caso lo scanner non funzionasse correttamente, eseguire i seguenti  
controlli:  
1. Se lo scanner utilizza un'alimentazione esterna e quest'ultima non  
fosse operativa, lo scanner non funzionerà. Utilizzare una sorgente  
di alimentazione affidabile e riprovare.  
4
1
2
5
3
2. Verificare che il cavo d'interfaccia sia saldamente collegato all'host.  
Consultare il proprio personale tecnico oppure il manuale del  
sistema host per controllare il corretto collegamento dello scanner.  
Guida Rapida  
15  
3. Verificare che il cavo d'interfaccia sia saldamente collegato allo scan-  
ner.  
4. Controllare che i codici a barre siano di qualità sufficientemente  
leggibile per lo scanner. Etichette piegate, strappate o sbavate  
potrebbero non essere leggibili. Utilizzare etichette sicuramente leg-  
1
gibili che appartenengono ad un sistema di simbologia utilizzato  
per controllare il funziomento dello scanner in lettura.  
5. Assicurarsi che il tipo di interfaccia dello scanner sia compatibile  
con il teminale/host consultando il manuale del POS e/o la Guida  
di riferimento del prodotto.  
Se lo scanner non funziona correttamente, contattare il rivenditore locale  
oppure il Servizio Assistenza Clienti di PSC.  
Dichiarazione di Conformità  
Il presente dispositivo è conforme ai regolamenti Part 15. Il funziona-  
mento è soggetto alle seguenti condizioni:  
1. il dispositivo non deve causare interferenze dannose; e  
2. il dispositivo deve accettare qualsiasi interferenza ricevuta, incluso le  
interferenze che potrebbero causare un funzionamento non desider-  
ato.  
Il presente apparto digtale di Classe A è conforme alla normativa canadese  
ICES-003.  
Classe LED  
CLASS 1 LED PRODUCT  
APPARECCHIO LED CLASSE 1  
APPAREIL A LED DE CLASSE 1  
LED KLASSE 1  
PRODOTTO LED CLASSE 1 EN60825-1  
1. La lettura delle varie simbologie dei codici a barre può essere indipen-  
dentemente abilitata o disabilitata nello scanner.  
®
16  
Magellan 1000i  
Guía de Referencia Rápida  
La finalidad de esta guía es ayudarle a instalar el equipo de forma rápida y  
eficiente. Para obtener más datos, incluida información de programación,  
consulte la Guía de referencia del producto (PRG) que podrá ver y des-  
cargar de la página Web de PSC, cuya dirección aparece en la contracubi-  
erta de este manual.  
Instalación  
Encamine el cable de interfaz desde el terminal o el equipo central.  
Conecte el adaptador de CA (si se utiliza uno) a una toma de corriente de  
pared y al cable de interfaz (I/F). A continuación encamine y conecte el  
cable I/F al escáner. Para comprobar el funcionamiento, coloque un  
código de barras en buen estado ante el escáner. La unidad emitirá un  
1
pitido y/o parpadeará el LED de lectura correcta y enviará los datos del  
código de barras al equipo central o al terminal. Si no es así, consulte la  
sección Solución de averías de esta guía.  
La instalación del escáner ha finalizado.  
Si se utilizan  
adaptadores de  
220-230 V CA, el  
cable debe  
Al equipo  
central/terminal  
Cable de interfaz  
orientarse hacia  
abajo, como  
muestra la imagen.  
Si se instala hacia  
arriba, ejercerá una  
tensión indebida  
sobre la toma de  
corriente.  
Adaptador  
de CA (si es  
necesario)  
Conectar  
aquí  
1. El funcionamiento del indicador acústico y el LED es seleccionable y  
es posible que un usuario anterior lo haya desactivado.  
Guía de referencia rápida  
17  
 
Soporte Opcional  
Existe un soporte opcional para el escáner que puede acoplarse de  
forma permanente a una pared o a un mostrador. Después de  
colocar el soporte en la posición óptima, se podrá desmontar el  
escáner (junto con el soporte) si desea trasladarlo de lugar. Para  
ello, solo tiene que elevar la unidad completa, tal y como muestra  
la imagen.  
Suministro Eléctrico  
1
Algunos modelos precisan una fuente de alimentación de Clase 2 o LPS  
homologada que suministre electricidad directamente a la unidad.  
Instrucciones Para Escanear  
Los códigos de barras pueden colocarse delante del escáner mientras éste  
permanece apoyado sobre el mostrador o el soporte opcional. También es  
posible elevar y sostener el escáner/unidad como muestra la imagen.  
Opción de interruptor mostrada  
*Soporte opcional  
1. Las unidades de desconexión del terminal (POT) no precisan una  
fuente de alimentación.  
®
18  
Magellan 1000i  
Modo de Exploración de Objetivo  
Para leer un código de barras (solo opción de interruptor)...  
Mantenga pulsado el interruptor. Aparecerá un haz para apun-  
tar.  
Centre el haz para apuntar lo más posible sobre el código de  
barras que vaya a leer y suelte el interruptor para leer la eti-  
queta.  
El escáner no leerá códigos de barras mien-  
tras el interruptor permanezca pulsado.  
El modo de exploración de objetivo leerá los  
códigos de barras en cualquier dirección.  
El escáner volverá al modo de haz completo  
una vez que haya transcurrido un tiempo con-  
figurable.  
NOTA  
Solución de Problemas  
Si el escáner no funciona correctamente, deberán realizarse las siguientes  
comprobaciones:  
1. Si el escáner utiliza una fuente de alimentación externa y dicha  
fuente se ha averiado, el escáner no funcionará. Cambie la fuente de  
alimentación por otra en buen estado y restablezca el funciona-  
miento.  
4
1
2
5
3
2. Compruebe que el cable de interfaz está perfectamente acoplado al  
equipo central. Pida ayuda al personal de asistencia técnica o con-  
sulte el manual del sistema central para comprobar que el escáner  
esta correctamente conectado.  
Guía de referencia rápida  
19  
3. Compruebe que el cable de la interfaz está perfectamente acoplado  
al escáner.  
4. Compruebe que los códigos de barras tienen la calidad suficiente  
para ser reconocidos por el escáner. El escáner no leerá etiquetas  
arrugadas, emborronadas o rasgadas. Para comprobar el funciona-  
miento de la función de lectura del escáner, explore etiquetas que  
1
contengan una simbología activa en buen estado .  
5. Asegúrese de que el tipo de interfaz del escáner es compatible con el  
terminal central. Para ello, consulte el manual del sistema POS y/o  
la Guía de referencia del producto.  
Si el escáner sigue sin funcionar correctamente, póngase en contacto con  
su proveedor local o con el Departamento de Atención al Cliente de  
PSC.  
Nota de Conformidad  
Este dispositivo cumple las normas recogidas en la Sección 15. El funcio-  
namiento está sujeto a las condiciones siguientes:  
1. Este dispositivo no causará interferencia peligrosa, y  
2. Este dispositivo aceptará cualquier interferencia recibida, incluida  
aquella que pueda causar un funcionamiento no deseado.  
Este aparato digital de Clase A cumple la normativa canadiense ICES -003.  
Clase de LED  
CLASS 1 LED PRODUCT  
APPARECCHIO LED CLASSE 1  
APPAREIL A LED DE CLASSE 1  
LED KLASSE 1  
PRODUCTO LED de CLASE 1 EN60825-1  
1. La lectura de distintas simbologías de códigos de barras puede acti-  
varse o desactivarse de forma independiente en el escáner.  
®
20  
Magellan 1000i  
Referência Rápida  
Este guia é fornecido para ajudar a ter sua instalação funcionando rápida  
e eficientemente. Para obter maiores detalhes, incluindo informações de  
programação, consultar o Guia de Referência do Produto (PRG), que  
está disponível para visualização e download a partir do web-site PSC lis-  
tado na contracapa deste manual.  
Instalação  
Rotear o cabo de interface a partir do terminal ou do host. Ligar o  
adaptador C.A. (se for usado um) em uma tomada na parede e o cabo de  
interface (I/F), então rotear e conectar o cabo I/F ao leitor. Verificar a  
operação apresentando códigos de barra em bom estado e reconhecidos  
1
pelo leitor. A unidade deve emitir um bip e/ou lampejar sua boa leitura,  
enviando os dados de código de barras para o host ou terminal. Caso  
contrário, consultar a seção Diagnóstico deste guia.  
A instalação do leitor está completa.  
Para adaptadores  
Cabo de interface  
220-230 VAC, o fio  
deve estar voltado  
para baixo, como  
mostrado na  
Para Host/Terminal  
ilustração. Se for  
instalado para cima,  
irá causar peso  
indevido na saída do  
soquete.  
Adaptador C.A.  
(se necessário)  
Conectar  
aqui  
1. O comportamento do bip e do LED pode ser selecionado e pode estar  
desabilitado por um usuário anterior.  
Referência Rápida  
21  
 
Suporte Opcional  
Um suporte opcional está disponível para o leitor, que pode ser  
conectado permanentemente a uma parede ou um balcão. Após  
localizar o balcão em uma boa posição , o leitor (paralelo ao  
balcão) pode ser destacado para uso portátil, levantando a  
unidade como mostrado abaixo.  
Fornecimento de Energia  
1
Alguns modelos exigem uma fonte de energia Listada Classe 2 ou Lis-  
tada LPS, que fornece a energia diretamente para a unidade.  
Como Fazer Leitura  
Os códigos de barra podem ser apresentados ao leitor enquanto este está  
no balcão ou na suporte opcional, ou o leitor/montagem pode ser levan-  
tado e segurado como mostrado abaixo.  
Opção com Botão  
*Suporte opcional  
1. Fornecimento de energia das unidades do tipo POT não exigem uma  
fonte de energia externa.  
®
22  
Magellan 1000i  
Modo de Leitura Direcionada  
Para ler um código de barra (somente opção de butão)...  
Pressionar e segurar o butão. Um padrão almejado irá aparecer.  
Com o padrão almejado centrado no código de barra para ser  
lido, soltar o butão para ler a etiqueta.  
O leitor não irá ler códigos de barra enquanto  
o butão estiver pressionado.  
Modo de Leitura Etiquetado irá ler códigos de  
barra em qualquer orientação.  
O leitor irá retornar para o padrão total Omni  
NOTA  
Mode depois que um tempo configurável tiver  
passado.  
Diagnóstico  
Se o leitor não estiver operando de forma apropriada, as seguintes to ver-  
ificações devem ser realizadas:  
1. Se o leitor usar um fornecimento de energia externo e este estiver  
falhando, o leitor não irá operar. Trocar o fornecedor de energia  
com um reconhecidamente bom e testar novamente a operação.  
4
1
2
5
3
2. Verificar se o cabo de interface está conectado com segurança ao  
host. Consultar seu suporte técnico ou o manual do sistema host  
para verificar a conexão apropriada para o leitor.  
Referência Rápida  
23  
3. Verificar se o cabo de interface está conectado de forma segura ao  
leitor.  
4. Verificar se os códigos de barra são de qualidade suficiente para  
serem reconhecidos pelo leitor. Etiquetas dobradas, manchadas ou  
molhadas podem fazer com que o leitor não as leia. Fazer o scan de  
1
etiquetas boas de uma simbologia para verificar a operação de leit-  
ura do leitor.  
5. Garantir que o tipo de interface do leitor é compatível com o termi-  
nal host, consultando seu manual do sistema PDV e/ou o Guia de  
Referência do Produto.  
Se o leitor não funcionar ainda adequadamente, contactar seu fornecedor  
local ou os Serviços de Suporte ao Cliente.  
Declaração de Conformidade  
Este dispositivo atende às regras Parte 15. A operação é submetida às  
seguintes condições:  
1. Este dispositivo não pode causar interferências nocivas; e  
2. Este dispositivo deve aceitar qualquer interferência recebida, inclu-  
indo interferência que pode causar operação indesejada.  
Este equipamento digital Classe A atende à norma Canadense ICES -003.  
Classe LED  
CLASS 1 LED PRODUCT  
APPARECCHIO LED CLASSE 1  
APPAREIL A LED DE CLASSE 1  
EN60825-1  
LED KLASSE 1  
PRODUTO LED CLASSE 1  
1. A leitura de várias simbologias de código de barra pode ser indepen-  
dentemente habilitada ou desabilitada no leitor.  
®
24  
Magellan 1000i  
快速参考  
提供本指南帮助您迅速有效地安装和运行。欲知详情,  
包括编程信息参阅产品参考指南(PRG)以从本指南封  
底列出的PSC网站浏览和下载该指南。  
安装  
对从终端或主机来的接口电缆进行布线AC适配器(如  
果使用了的话)插入墙壁上的电源插座和(I/F)电缆接口,然  
后布线并将I/F电缆连接到扫描器已知的好条形码进行检  
查。扫描器的喇叭  
1应该鸣响并且/或者它的LED应该闪烁以表示读数正确,  
同时将条码数据发送到主机或者终端。如果无鸣响或者  
不闪烁,参阅本指南的故障检修部分。  
至此,扫2描器安装完毕。  
1蜂鸣器和LED的状态可选,并可由先前用户禁止。  
快速参考  
25  
 
可选用机座  
可使用可选机座将扫描器永久地装在墙壁或柜台上。将  
机座放在一个最佳位置后,可以像图例所示的那样举起整个  
扫描器(与机座一起)进行使用。  
电源  
有些型号要求使用所列出的2或者LPS电源3对  
扫描器进行直接供电。  
怎样进行扫描  
将条码静止在柜台上或者可选机座上对着扫描器,或者  
将扫描器/机座如图所示那样举起后进行扫描。  
3
POT型不需要电源。  
26  
Magellan® 1000i  
瞄准扫描模式  
为了读条码 (仅适用于开关型) ,应该:  
压下开关并保持,进入瞄准模式。  
在瞄准模式下对准要读取的条码开开关读标签。  
在开关被按着时扫描器不会读  
条码。  
瞄准扫描模式能在任意方向上  
注意  
读条码。  
在一定时间之后扫描器将返回  
到全向模式。  
故障处理  
如果扫描器不能正常工作,应当进行以下检查:  
1.果扫描器使用外部电源供电而外部电源发生故障扫  
描器不会工作。用已知的能正常工作的电源进行替换并重  
新进行试验。  
2.验接口电缆与主机是否牢固地连接询技术支持人员  
或参阅主机系统指南以核实扫描器是否已经适当的连接。  
快速参考  
27  
3. 核查接口电缆是否牢固地与扫描器相连接。  
4. 检查条码质量是否完好以便能让扫描器识别。起皱纹的、  
弄脏的、或者撕坏的标签可能导致扫描器根本无法读出。  
扫描已知完好的标签来检查扫描器的读操作。  
5. 查阅POS系统手册和/或者产品参考指南确保扫描器的接  
口类型与主机终端兼容。  
如果扫描器仍然不能正常工作与本地供应商或者PSC  
用户支持服务中心联系。  
符合法规声明  
本设备符合第15章有关规定。其操作符合以下条件:  
1. 本设备不会引起有害的干扰;同时  
2.设备必须接受任何所接收的干涉括可能引发错误操  
作的干涉。  
A数字式设备符合加拿ICES-003。  
LED类  
第1类 LED产品  
28  
Magellan® 1000i  
クイック・リファレンス  
このガイドでは、迅速かつ効率的にインストール手順を実行するため  
の情報を提供します。プログラミング情報を含む詳細については、製  
品リファレンス・ガイド (PRG) を参照してください。PRG は、このマ  
ニュアルの背表紙に記載されている PSC Web サイトからダウンロード  
することができます。  
インストール  
インターフェーーブルをターミナルまたはホストに接続します。  
必要に応じて AC アダプタを壁コンセントおよびインターフェース  
(I/F) ケーブルに接続し、I/F ケーブルをスキャナに接続します。状  
態のよいバーコードをスキャンし、正しく作動するか確認してくださ  
ニットはビープ音1を発するかみ取り正LED点滅させ、  
ホストまたはターミナルにバーコード・データを送信します。正しく  
作動しない場合は、このガイドのトラブルシューティング・セクショ  
ンを参照してください。  
これで、スキャナのインストールが完了しました。  
Ȁ
1
ビーパーおよび LED の動作は選択可能です。また、以前のユーザーにより無効にさ  
れている場合があります。  
クイック・リファレンス  
29  
 
オプションのスタンド  
オプションのスタンドを使用すると面または台上にスキャナを固  
定することができますタンドを最適な位置に配置した後でも図  
のようにユニット全体を持ち上げることによりタンドを取り付け  
たままスキャナを手持ちで使用することができます。  
電源  
一部のモデルは2、ユニットに直接電源を必要とします。  
スキャンの仕方  
スキャナを卓上またはオプションのスタンドに置いた状態、またはス  
タンドを取り付けたスキャナを図のように持ち上げた状態で、バーコ  
ードをスキャンすることができます。  
2 POT (Power Off the Terminal) ユニットには電源は不要です。  
30  
Magellan® 1000i  
目標スキャニング・モード  
バーコードを読み取るに(スイップション使用の場合のみ)…  
スイッチを押したままにします準パターンが表示されま  
す。  
照準パターンを読み取るバーコードの中央に当てイッチ  
を放してラベルを読み取ります。  
スイッチを押したままの状態では、スキ  
ャナはバーコードを読み取りません。  
目標スキャニング・モードでは、任意の  
向きのバーコードを読み取ることができ  
ます。  
注記  
設定時間を過ぎると、スキャナはフル・  
パターン・オムニ・モードに戻ります。  
トラブルシューティング  
スキャナが正しく作動しない場合は、以下の確認作業を行ってく  
ださい。  
1. 外部電源をお使いの場合は部電源が故障するとスキャナ  
も作動しません頼できる電源装置と交換しキャナが  
作動するか再テストしてください。  
2. インターフェーーブルがホストにしっかりと接続され  
ていることを確認してくださいキャナの正しい接続方法  
についてはクニカルサポートの担当者にお問い合わせい  
ただくかストのシステムマニュアルを参照してください。  
クイック・リファレンス  
31  
3. インターフェース・ケーブルがスキャナにしっかりと接続さ  
れていることを確認してください。  
4. バーコードの状態がスキャナで認識するのに十分な状態であ  
ることを確認してください。ラベルにしわ、汚れ、破れなど  
があるとキャナでまったく読み取れない場合があります。  
有効なシンボル体系3が印刷された状態のよいラベルをスキ  
ャンして、スキャナの読み取り機能をテストしてください。  
5. スキャナのインターフェースのタイプとホストターミナルと  
の互換性を確認してください。確認方法は、POS システムマ  
ニュアルまたはスキャナの製品ガイドを参照してください。  
上記の方法を実行してもスキャナが正しく作動しない場合は、お近く  
のサプライヤーまたPSCスタマーサポートサービスまでご連絡く  
ださい。  
3
さまざまなバーコード体系ごとに、スキャナでの読み取りを有効または無効にする  
ことができます。  
適合性について  
本製品は、VCCI に適合しています。操作は以下の条件に従います。  
1. この装置は有害な干渉を起こさない。  
2. この装置は作動を起こす可能性がある干渉を含め信  
したあらゆる干渉を受け入れなければならない。  
本製品は、VCCI に適合したクラスB デジタル装置です。  
LED クラス  
クラス 1 LED 製品  
32  
Magellan® 1000i  
NOTES  
NOTES  
PSC Inc. hereby declares that the equipment specified below has been tested and  
found compliant to the following directives and standards.  
EU Directives  
89/336/EEC EMC  
73/23/EEC Low Voltage  
2002/96/EC WEEE  
Standards  
EMC: FCC part 15B Class B:2003 (US)  
ICES-003 Class B:1997 (Canada)  
VCCI Class B:2001 (Japan)  
EN 55022 Class B:1998 (EU)  
CNS 13438 Class B:1997 (Taiwain)  
AS/NZS 3548 Class B:1998  
GOST EMC approved (Russia)  
CISPR 22 Class B:1992/1997 (World)  
Product Safety: UL 60950-1:2003 (US)  
CSA 60950:2003 (Canada)  
EN 60950:2001 (Europe)  
EN 60825-1/A2:2001 (EU)  
IEC 60950-1:2001 (World)  
IEC 60825-1:2001 (World)  
NOM:1994 (Mexico)  
Immunity: EN55024:2001 - ITE (EU)  
EN 61000-3-2:2000 - Harmonic Current (EU)  
EN 61000-3-3:1995 - Voltage Flicker (EU)  
Quality Systems: ISO 9001:2000  
BS EN ISO 9001:2000  
Power Supply (optional):UL 60950 (US)  
CSA 60950 (Canada)  
EN 60950/IEC 60950 (World)  
Most World Standards  
Equipment Type: Barcode Scanning  
Product Model Name: Magellan® 1000i  
Serial Number Start Sequence: Cxxxxxxx  
Date Placed into EU Service: December 2005  
Responsible Manufacturer: PSC Inc./PSC Scanning, Inc.  
959 Terry St. Eugene, OR 97402 US  
Asia Pacific  
Italy  
PSC Hong Kong  
PSC S.p.A.  
Hong Kong  
Vimercate (MI), Italy  
Telephone: [39] (0) 39/62903.1  
Fax: [39] (0) 39/6859496  
Telephone: [852]-2-584-6210  
Fax: [852]-2-521-0291  
Australia  
Japan  
PSC Asia Pacific Pty Ltd.  
North Ryde, Australia  
Telephone: [61] 0 (2) 9878 8999  
Fax: [61] 0 (2) 9878 8688  
PSC Japan K.K.  
Shinagawa-ku, Tokyo, Japan  
Telephone: 81 (0)3 3491 6761  
Fax: 81 (0)3 3491 6656  
France  
Latin America  
PSC S.A.R.L.  
PSC S.A., INC.  
LES ULIS Cedex, France  
Telephone: [33].01.64.86.71.00  
Fax: [33].01.64 46.72.44  
Miami, Florida, USA  
Telephone: (305) 591-3222  
Fax: (305) 591-3007  
Germany  
United Kingdom  
PSC GmbH  
PSC Bar Code Ltd.  
Darmstadt, Germany  
Telephone: 49 (0) 61 51/93 58-0  
Fax: 49 (0) 61 51/93 58 58  
Watford, England  
Telephone: 44 (0) 1923 809500  
Fax: 44 (0) 1923 809 505  
PSC Inc.  
959 Terry Street  
Eugene, OR 97402  
Telephone: (541) 683-5700  
©2005-2006 PSC  
R44-2547 (Rev. A)  
3/06  

Teac Automobile Parts 125600 User Manual
Sharp T Found Ar M208 User Manual
Sharp Af S60px User Manual
Ricoh Aficio Sp 4110sf User Manual
LG 55UL3J B User Manual
HP A RPS800 User Manual
DELTA DVP FEN01 User Manual
DELL 1850 User Manual
BROTHER HL L2375DW 02 User Manual
BLACK DECKER CS1250 User Manual