Oricom Secure 510 User Manual

Premium DECT  
Digital Baby Monitor  
Secure 510  
User Guide  
TABLE OF CONTENTS  
3
IMPORTANT SAFETY INFORMATION ....................................................... 4  
GETTING STARTED .................................................................................. 7  
ORICOM DIGITAL BABY MONITOR .......................................................... 8  
SETTING UP.............................................................................................. 14  
USING YOUR DIGITAL BABY MONITOR ................................................... 19  
TROUBLESHOOTING................................................................................ 38  
CUSTOMER SUPPORT.............................................................................. 40  
WARRANTY............................................................................................... 41  
4
IMPORTANT SAFETY INFORMATION  
Important Safety Information  
s )T IS VERY IMPORTANT THAT YOU READ THE 5SER 'UIDE CAREFULLY AS IT CONTAINS DETAILED  
information you will need to get the most from your Oricom Baby Monitor. If you  
HAVE ANY ISSUES SETTING UP OR USING YOUR /RICOM "ABY MONITOR PLEASE CALL OUR  
Customer support team. Our dedicated local team are more likely to be able to  
help you than the retailer where you made your purchase.  
s 9OUR /2)#/- "ABY -ONITOR IS DESIGNED TO BE AN AID AND SHOULD NOT BE USED  
AS A SUBSTITUTE FOR RESPONSIBLE AND PROPER ADULT SUPERVISION OF A CHILDꢀ  
s 4HE "ABY -ONITOR HAS BEEN DESIGNED TO PROVIDE SOME ADDED REASSURANCE IN  
the form of sound transmission for those times when you are not in the same  
ROOM AS YOUR BABY PROVIDED YOU ALWAYS STAY WITHIN HEARING RANGE OF THE BABY  
MONITOR DURING USEꢀ 9OUR "ABY -ONITOR IS NOT A MEDICAL DEVICEꢁ NOR A DEVICE  
TO PREVENT CASES OF 3UDDEN )NFANT $EATH 3YNDROME ꢂ3)$g3 OR ꢃCOT DEATHꢃꢁ  
AND YOU SHOULD NOT RELY ON IT FOR YOUR BABYgS WELLBEINGꢀ )T IS IMPORTANT THAT YOU  
regularly check on your baby personally.  
s -AKE SURE THE "ABY UNITꢁ 0ARENT UNIT AND MAINS ADAPTOR CABLES ARE KEPT OUT  
of reach of your baby and other young children at all times, at least one metre  
away.  
s .EVER PLACE THE BABY UNIT OR PARENT UNIT INSIDE YOUR BABYꢄS COTꢁ BED OR PLAYPENꢀ  
s .EVER COVER THE 0ARENT OR BABY UNITS WITH CLOTHESꢁ TOWELS OR BLANKETS OR ANY  
OTHER ITEMꢀ .EVER USE OR PLACE YOUR 0ARENT OR "ABY UNIT IN OR NEAR MOISTURE OR  
water (e.g. near bath or pool). Immersing in water could cause electric shock  
AND EVEN DEATHꢀ  
IMPORTANT SAFETY INFORMATION  
5
s 4HE INSTALLATION LOCATION PLAYS AN IMPORTANT ROLE IN ENSURING PROPER OPERATIONꢀ  
Therefore, maintain a distance of at least one meter from other electronic  
EQUIPMENTꢁ SUCH AS MICROWAVE OVENS OR HI¥l DEVICESꢁ OTHERWISE THEY COULD  
CAUSE INTERFERENCEꢀ $URING CONTINUAL USE THE "ABY UNIT POWER ADAPTORS MAY  
become warm to the touch. This is normal and should not be a concern.  
Warning  
2ISK OF SUFFOCATIONꢅ  
+EEP ALL PACKAGING MATERIALS AND PROTECTIVE FOILS OUT OF REACH OF CHILDRENꢀ  
$O NOT PLACE THE !# !DAPTOR CABLE IN A HIGH ꢃWEAR AND TEARꢃ LOCATIONꢀ .EVER USE A  
frayed or compromised cord.  
Battery safety  
s "ATTERIES REPRESENT A HAZARD TO HEALTH AND THE ENVIRONMENTꢅ  
s 4HEY CONTAIN TOXICꢁ ECOLOGICALLY HAZARDOUS HEAVY METALSꢀ $O NOT DISPOSE OF  
BATTERIES IN A lRE AS THEY MAY EXPLODEꢀ $ISPOSE OF BATTERIES ACCORDING TO LOCAL  
REGULATIONSꢁ NEVER IN YOUR HOUSEHOLD RUBBISHꢀ  
s $O NOT DISMANTLEꢁ CUTꢁ OPENꢁ CRUSHꢁ BENDꢁ PUNCTUREꢁ OR SHRED CELLS OR BATTERIESꢀ  
If a battery leaks, do not let the battery liquid touch skin or eyes. If this happens,  
immediately flush the affected areas with water, and seek medical assistance.  
s
$O NOT MODIFYREMANUFACTUREꢁ ATTEMPT TO INSERT FOREIGN OBJECTS INTO THE BATTERYOR  
immerse or expose it to water or other liquids. Batteries may explode if damaged.  
6
IMPORTANT SAFETY INFORMATION  
s 5SE ONLY THE BATTERIES SUPPLIED WITH THE PRODUCTꢀ )MPROPER USEꢁ OR USE OF  
UNAPPROVED BATTERIES MAY PRESENT A RISK OF lREꢁ EXPLOSIONꢁ OR OTHER HAZARDꢁ AND  
MAY INVALIDATE ANY APPROVAL OR WARRANTYꢀ  
s
)F YOU BELIEVE THE BATTERIES ARE DAMAGEDꢁ REMOVE PRODUCT FROM THE CHARGER AND  
STOP USING THE PRODUCTꢀ #ONTACT /RICOM FOR ASSISTANCEꢀ .EVER USE A DAMAGED  
battery.  
Disposal  
Always dispose of your products at the end of their life in accordance with  
your local waste disposal requirements. Packaging materials all cardboard  
and paper packaging should be recycled in accordance with your local council  
waste regulations.  
GETTING STARTED  
7
'OT EVERYTHINGꢆ  
s "ABY UNIT  
This User Guide provides you with all the  
information you need to get the most from  
your Oricom Digital Baby Monitor.  
s 0ARENT UNIT  
s ꢇ X !! .I-( ꢈꢉꢊꢊM!H  
rechargeable batteries for  
Parent unit (pre-installed)  
Please read this guide carefully and keep  
it for future reference.  
Need help?  
s 0ARENT UNIT CHARGER  
s ꢇ X POWER ADAPTERS  
If you need assistance setting up or using your  
/RICOM $IGITAL "ABY -ONITOR CALL OUR 3UPPORT  
team on 1300 889 785. If you would like any  
additional or replacement rechargeable batteries  
for the parent unit (Part No.BAT1300MAH) order  
/UR DEDICATED ADVISORS ARE MORE LIKELY TO BE ABLE  
to help you than the retailer where you made your  
purchase.  
!LTERNATIVELYꢁ YOU MAY lND THE ANSWER IN THE @(ELPꢄ  
section at the back of this guide.  
Additional answers to Frequently Asked Questions  
ARE ALSO AVAILABLE FROM WWWꢀORICOMꢀCOMꢀAU  
8
ORICOM DIGITAL BABY MONITOR  
Mute Low  
(on top of unit)  
Mute All  
(on top of unit)  
Parent unit  
Power on/off  
Press to toggle the  
Baby unit microphone  
SENSITIVITY BETWEEN  
normal and Mute Low.  
Press to toggle the (on top of unit)  
0ARENT UNIT RECEIVE  
VOLUME BETWEEN  
on and off.  
Press and hold to  
switch the power  
on or off.  
Baby sound level LEDs  
)NDICATES THE LEVEL OF RECEIVED  
SOUNDꢀ 4HE ,%$S WILL LIGHT UP  
PROGRESSIVELY AS THE SOUND  
increases. See page 20 for  
further information.  
Torch (on back of unit)  
Press to switch the torch feature  
on and off.  
Link indicator  
Steady green indicates that the  
Baby and Parent units are linked.  
Flashes green if no link established  
for 30 seconds. Flashes red if no  
link established after 30 seconds.  
Also flashes green when the Talk  
button is pressed on the Parent  
unit to initiate parental talk back.  
Mute LED  
Steady red indicates that Mute  
All has been switched on.  
Amber indicates that Mute Low  
has been switched on.  
Talk (on side of unit)  
Press to talk to your baby.  
Battery status indicator  
Red light indicates the batteries  
are low and need re-charging.  
LCD Display  
0OWER SAVING BACKLIGHT TURNS ON  
when you press any button and  
then switches off after 15 seconds.  
Microphone  
OK  
0RESS TO CONlRM THE MENU OPTION  
displayed.  
Up  
Menu  
Press to open the menu.  
Down  
$ECREASE SPEAKER  
)NCREASE SPEAKER VOLUMEꢀ  
Scroll through the menu options.  
Press and hold to exit the menu  
and return to the idle screen.  
VOLUMEꢀ 3CROLL THROUGH  
the menu options.  
ORICOM DIGITAL BABY MONITOR  
9
Parent unit display icons  
Menu options:  
Nightlight  
Music  
Feed Timer  
Setup  
Battery status  
&EED TIMER ON ꢂVIBRATE ON  
&EED TIMER ON ꢂVIBRATE OFF  
4EMPERATURE ALERT ꢂVIBRATE ON  
4EMPERATURE ALERT ꢂVIBRATE OFF  
Nightlight is on  
Full charge (75-100%)  
Medium charge (51-74%)  
Low charge (25-50%)  
Empty (8-24%)  
Music is playing  
$ISPLAYS THE TEMPERATURE AS  
measured at the Baby unit  
Flashing (0-7%)  
Icon will scroll when charging  
#RYING ALERT ꢂVIBRATE ON  
#RYING ALERT ꢂVIBRATE OFF  
Indicates when you can scroll  
up or down through the menu  
options  
10 ORICOM DIGITAL BABY MONITOR  
Parent unit charger  
Front  
Charging light  
Red when the Parent unit is  
correctly placed on the charger.  
Back  
Power socket  
For connection to the mains  
POWER SOCKET VIA THE POWER  
adaptor cable supplied.  
ORICOM DIGITAL BABY MONITOR 11  
Temperature sensor  
Baby unit  
Make sure the sensor is placed  
with clear space around it and  
not in contact with any surfaces  
TO ENSURE IT WORKS EFFECTIVELYꢀ  
Nightlight  
Press to switch the  
Nightlight on or off.  
Microphone  
Brightness  
Power on/off  
Press and hold to switch  
the power on or off.  
0RESS TO ADJUST THE NIGHTLIGHT  
brightness: high, medium or  
low (once the nightlight has  
been switched on).  
Skip forward  
When music has been  
switched on (see Music  
button description below),  
press to skip through the  
SONGS AVAILABLEꢀ  
Find  
Press to emit an alert beep  
from the Parent unit – useful  
FOR lNDING THE 0ARENT UNIT IF  
YOUꢄVE MISPLACED ITꢀ  
Music  
Press to switch music on  
Volume up/down  
at the Baby unit (the music  
and duration will be as last  
set at the Parent unit). Press  
again to switch the music  
off. To change the song,  
press the Skip button.  
Increase or decrease the  
LOUDSPEAKER VOLUME FOR PLAYING  
music or for parental talk back.  
Nightlight  
Illuminates around the base.  
Link indicator  
Steady green indicates that the Baby and Parent units are linked.  
Flashes green if no link established for 30 seconds. Flashes red if no link  
established after 30 seconds. Also flashes green when the Talk button is  
pressed on the Parent unit to initiate parental talk back.  
12 ORICOM DIGITAL BABY MONITOR  
Back of Baby unit  
Power socket  
For connection to the mains power  
SOCKET VIA THE POWER ADAPTOR CABLE  
supplied.  
ORICOM DIGITAL BABY MONITOR 13  
Parent unit menu map  
Turn (On/Off)?  
Brightness  
Timer  
High  
Medium  
Low  
Nightlight  
5 min  
10 min  
15 min  
Constant  
(Play/Stop)?  
3 Blind Mice  
Brahms  
Choose Song  
Music  
5 min  
#ANON IN $  
$REAM #HASE  
$REAMING  
Hush Baby  
Night Night  
Twinkle Star  
Play All  
10 min  
15 min  
Constant  
Timer  
Menu  
(Start/Stop) Timer  
Set Time  
Duration  
Feed Timer  
Repeat On  
Repeat Off  
Timer Repeat  
Timer Alert  
Beep  
Beep&Vibe  
Vibrate  
Beep  
Beep&Vibe  
Vibrate  
Crying Alert  
Temp Alert  
Backlight  
Beep  
Setup  
Screen only  
Beep&Vibe  
Vibrate  
Screen only  
Off  
On w alerts  
Off w alerts  
14 SETTING UP  
Parent unit  
1. Plug one of the power adaptor cables into the socket marked  
on the back of  
the Parent unit charger and plug the other end into the mains power wall socket  
and switch the power on.  
ꢇꢀ !CTIVATE THE BATTERIES BY PULLING THE PLASTIC TAB AWAY FROM THE BACK OF THE 0ARENT  
unit.  
SETTING UP 15  
3. Place the Parent unit into the charger. The red charging light will illuminate on  
the charger and the battery icon will start scrolling on the Parent until display to  
indicate that the batteries are being charged.  
Low battery indicator  
Battery icon  
Charging light  
,EAVE THE BATTERIES TO CHARGE FOR ꢈꢋ HOURS TO REACH MAXIMUM CHARGEꢀ 7HEN THE  
batteries are fully charged the battery icon on the display will show a full charge  
.
Warning  
/NLY USE THE POWER ADAPTORS SUPPLIEDꢀ 5SING INCORRECT POWER MAY PERMANENTLY  
damage your product. This product is designed for indoor use only.  
16 SETTING UP  
Battery performance  
Rechargeable batteries in the Parent unit will last up to 20 hours in normal use. Please note that new  
BATTERIES DO NOT REACH FULL CAPACITY UNTIL THEY HAVE BEEN IN NORMAL USE FOR SEVERAL DAYSꢀ  
The charge capacity of rechargeable batteries will reduce with time as they wear out, so reducing the  
PERFORMANCE TIME OF THE 0ARENT UNITꢀ %VENTUALLY THEY WILL NEED TO BE REPLACEDꢀ .EW BATTERIES CAN BE  
OBTAINED FROM THE /RICOM $IGITAL "ABY -ONITOR 3UPPORT #ENTRE ꢈꢉꢊꢊ ꢌꢌꢍ ꢎꢌꢏꢀ  
4HE 0ARENT UNIT RECHARGEABLE BATTERIES WILL LOSE CHARGE OVER A PERIOD OF TIMEꢁ EVEN IF SWITCHED OFFꢀ  
Battery low warning – Parent unit  
When the batteries are low – approximately within 1 hour of running out – the Parent unit will emit  
a low battery alert, the low battery indicator will turn red, the display will show Low Battery and the  
icon will flash. Place the Parent unit back on the charger to charge the batteries. To speed up the  
CHARGING PROCESS TURN THE 0ARENT UNIT OFF WHEN CHARGING IF ITꢄS NOT BEING USEDꢀ  
9OU CAN STILL USE YOUR 0ARENT UNIT TO MONITOR YOUR BABY EVEN WHEN THE BATTERIES ARE LOWꢁ PROVIDED IT  
remains in the charger cradle to re-charge the batteries.  
Baby unit  
1. Plug the remaining power adaptor cable into the socket marked  
on the back  
of the Baby unit and plug the other end into the mains power and switch on.  
SETTING UP 17  
Switch on and link the Parent and Baby units  
1. Press and hold the  
button on the Baby unit for 1 second. The nightlight will  
briefly illuminate and then the green Link indicator will flash.  
2. Press and hold the  
BUTTON ON THE 0ARENT UNIT UNTIL ALL THE ,%$S ON THE UNIT BRIEmY  
illuminate. The green Link indicator will flash and the display will show I’m Linking.  
Warning  
.EVER USE NONꢐRECHARGEABLE BATTERIES IN THE 0ARENT UNITꢀ /NLY USE THE RECOMMENDED  
TYPE n ꢇ X !! .I-( ꢈꢉꢊꢊM!H BATTERIESꢀ 5SING OTHER TYPES COULD PERMANENTLY  
damage the unit. Charge the batteries as instructed in this user guide. The Parent unit  
can still be used when it is in the charger.  
Removing the batteries  
)F YOU EVER NEED TO REMOVE THE BATTERIESꢁ SIMPLY SLIDE OPEN THE BATTERY COMPARTMENT COVER AND USE THE  
RIBBON TO EJECT THE BATTERIESꢀ  
Once the units are Linked the green Link light on the top of the Parent unit and  
THE GREEN ,%$ ON THE "ABY UNIT WILL STOP mASHING AND REMAIN A STEADY GREENꢀ 4HE  
units are now ready to use.  
IMPORTANT  
4HE LINK CONlRMATION BETWEEN THE TWO UNITS IS VITAL FOR USE SO THEY CAN COMMUNICATEꢀ )F  
the link between the units is broken at any time, the Link indicators on both units will flash  
green as they try to search for each other. The Parent unit displays I’m Linking...After 30  
seconds, if the link is still broken, the Baby and Parent units Link indicators will flash red.  
The Parent unit display will show No Link and you will hear an alert signal.  
18 SETTING UP  
If the link is broken:  
s CHECK THAT THE MAINS POWER IS PLUGGED IN AND SWITCHED ON AT THE "ABY UNIT  
s CHECK THAT BOTH UNITS ARE SWITCHED ON  
s CHECK THAT THE BATTERIES ARE CHARGED IN THE 0ARENT UNIT  
s CHECK THAT THE 0ARENT AND "ABY UNITS ARE WITHIN RANGE OF EACH OTHER ꢂIN IDEAL  
conditions the range is up to 300 metres outdoors and 50m indoors)  
Positioning your units  
The Baby unit should ideally be within 1m-2m of your baby for best performance.  
If you place the Parent and Baby units too close together you will hear a high pitched noise, this is  
normal. The units are designed to be located at a distance from one another, e.g. in separate rooms.  
USING YOUR DIGITAL BABY MONITOR 19  
Switching on/off  
Switch the Baby unit on  
1. Press and hold the  
button for 1 second. The nightlight will briefly illuminate  
and then the green Link indicator will flash until it links with the Parent unit.  
Once linked the green Link indicator will remain on.  
Switch the Parent unit on  
1. Press and hold the  
BUTTON ON THE 0ARENT UNIT UNTIL ALL THE ,%$S BRIEmY  
illuminate. The green Link indicator will flash and the display will show I’m  
Linking.  
Once the units are linked the green Link indicators on the Parent and Baby  
units will stop flashing and remain a steady green. The units are now ready to  
use.  
Switch the Baby unit off  
1. Press and hold the  
switch off.  
button on the Baby unit. The green Link indicator will  
Switch the Parent unit off  
1. Press and hold the  
button on the Parent unit until an audible alert sounds.  
The green Link indicator will switch off and the display will go blank.  
20 USING YOUR DIGITAL BABY MONITOR  
Baby sound level LED indicators  
LEDs 1-2 = Green  
(or Amber if  
LEDs 3-4 = Green  
LEDs 5-7 = Red  
Mute Low is on)  
4HE SEVEN ,%$S ACROSS THE TOP OF THE 0ARENT UNIT LIGHT UP TO INDICATE THE LEVEL  
OF SOUND BEING RECEIVED FROM THE "ABY UNITꢀ 4HE ,%$S LIGHT UP PROGRESSIVELY AS  
the sound increases.  
LEDs 1-2 LIGHT UP 'REEN ꢂOR !MBER IF -UTE ,OW IS ONꢁ SEE PAGE ꢈꢌ WHEN  
SOUNDS OF ꢏꢎD" AND ꢋꢉD" ARE RECEIVEDꢀ  
LEDs 3-4 LIGHT UP 'REEN WHEN SOUNDS OF ꢋꢍD" AND ꢎꢏD" ARE RECEIVEDꢀ  
LEDs 5-7 LIGHT UP 2ED WHEN SOUNDS OF ꢌꢉD"ꢁ ꢌꢍD" OR ꢍꢏD" ARE RECEIVEDꢀ  
Equivalent sound level examples:  
ꢋꢊD"ꢐꢎꢊD" ꢑ NORMAL CONVERSATION  
ꢎꢏD" ꢑ LOUD CONVERSATION  
ꢌꢉꢐꢍꢏD" ꢑ LOUD TRAFlC NOISE  
USING YOUR DIGITAL BABY MONITOR 21  
Adjust the loudspeaker volume  
At the Parent unit:  
1. Press  
SETTINGꢀ 4HERE ARE ꢏ VOLUME LEVELS AND OFF ꢂ-UTE ꢀ 4HE VOLUME LEVEL WILL BE  
SHOWN ON THE DISPLAY AT EACH PRESSꢁ EꢀGꢀ ,EVEL ꢉ IS SHOWN AS Volume  
or  
TO SELECT THE REQUIRED LEVELꢀ 4HE lRST PRESS WILL SHOW THE CURRENT  
.
)F YOU WISH TO SWITCH THE VOLUME OFFꢁ KEEP PRESSING  
Volume Off. The Mute All indicator will illuminate.  
until the display shows  
At the Baby unit:  
4HERE ARE ꢏ VOLUME SETTINGSꢀ  
1. When Music is being played or Talk back is in progress from the Parent unit,  
press the or BUTTON TO ADJUST THE VOLUMEꢀ  
2. If no music or Talk back is in use, pressing the  
or  
BUTTONS WILL ADJUST THE  
VOLUME AND A BEEP WILL SOUND AT THE APPROPRIATE VOLUME LEVEL SETꢀ  
)F YOU TRY AND SET THE VOLUME HIGHER OR LOWER THAN THE ꢏ SETTINGS AVAILABLE ON EITHER UNIT YOU WILL HEAR AN  
error tone.  
Setting the Parent unit to Volume Off IS THE EQUIVALENT OF SWITCHING THE -UTE !LL FEATURE ONꢀ 3EE PAGE  
22 for more information on Mute All.  
4HE DEFAULT LOUDSPEAKER VOLUME ON BOTH UNITS IS ,EVEL ꢉꢀ  
22 USING YOUR DIGITAL BABY MONITOR  
Mute All feature – Parent unit only  
4HE -UTE !LL FEATURE PREVENTS ANY SOUND COMING FROM THE 0ARENT UNIT  
loudspeaker. With Mute All on you can still monitor your baby using the Baby  
SOUND LEVEL ,%$ INDICATORS ꢂPAGE ꢇꢊ AND THE #RYING !LERT ꢂPAGE ꢉꢒ ꢀ  
1. To switch Mute All on, press the  
Mute indicator will illuminated red.  
button located on the top of the unit. The  
2. To switch Mute All off, press the  
switch off.  
button again. The red Mute indicator will  
Be careful not to accidentally switch the torch feature on because Mute All is automatically switched on  
when the Torch is switched on.  
3ETTING THE 0ARENT UNIT LOUDSPEAKER VOLUME TO Volume off IS THE EQUIVALENT OF SWITCHING THE -UTE !LL  
feature on.  
Mute Low  
&OR DISCREET OPERATION WHEN YOU DO NOT WISH TO HEAR ANY LOW LEVEL SOUNDSꢁ YOU  
CAN STILL MONITOR YOUR BABY USING THE "ABY SOUND LEVEL ,%$ INDICATORS ꢂPAGE  
20). When Mute Low is switched on, any sounds from the Baby unit to the  
0ARENT UNIT WILL BE MUTED UNLESS A SOUND IS MADE ABOVE A SET LEVELꢀ 4HE SET  
LEVEL ARE SOUNDS THAT ARE LOUDER THAN THE lRST TWO GREEN ,%$S WOULD REGISTERꢁ AS  
DESCRIBED IN @"ABY SOUND LEVEL ,%$ INDICATORS ON PAGE ꢇꢊꢀ  
If the  
or  
buttons are pressed whilst Mute All or Mute Low has been set then Mute All or Low  
WILL BE SWITCHED OFF AND THE LOUDSPEAKER VOLUME WILL RETURN TO ,EVEL ꢉ AUTOMATICALLYꢀ  
USING YOUR DIGITAL BABY MONITOR 23  
)F THE 0ARENT UNIT RECEIVES SOUND UP TO THE LEVEL OF THE lRST TWO ,%$S THEN THEY  
WILL TURN AMBER BUT NO SOUND WILL BE HEARDꢁ IF THE SOUND RISES ABOVE THIS LEVEL  
then the unit will un-mute so you can hear the sounds.  
1. To switch Mute Low on, press the  
unit. The Mute indicator will turn amber.  
button located on the top of the Parent  
2. To switch Mute Low off, press the  
button again. The amber indicator will switch off.  
Once the Mute Low sound threshold has been exceeded, baby sounds will be able to be heard for a  
FURTHER SIX SECONDS EVEN IF THEY DO NOT REACH THE -UTE ,OW THRESHOLDꢀ  
Talk Back  
9OU CAN USE THE 0ARENT UNIT 4ALK "ACK FEATURE AS A ONE WAY INTERCOM TO COMFORT  
and reassure your baby. By speaking into the Parent unit your baby will hear  
YOUR VOICE FROM THE "ABY UNITꢀ 0LEASE NOTE THAT WHEN USING 4ALK "ACK YOU WILL  
not be able to hear your baby until you release the  
button.  
1. Press and hold down the button on the Parent unit to speak to your baby.  
Whilst the button is depressed the display will show Talk and the green  
Link indicators will flash on both units.  
Talk Back  
9OU WILL BE ABLE TO ACTIVATE 4ALK "ACK MODE EVEN IF OTHER FUNCTIONS HAVE BEEN ACTIVATED AT THE "ABY UNIT  
like Music playback or Nightlight on.  
Press  
$O NOT PRESS THE  
or  
TO ADJUST THE 4ALK "ACK VOLUME LEVEL OF THE "ABY UNIT LOUDSPEAKERꢀ  
button when the Baby unit and Parent unit are positioned in the same room.  
High-pitch noise will be generated if the  
button is pressed when Baby unit and Parent unit are  
close to each other or within 3 metres distance.  
When using Talk Back, hold the Parent unit approximately 30cm in front of your mouth when talking to baby.  
24 USING YOUR DIGITAL BABY MONITOR  
Find  
9OU CAN PRESS THE  
button on the Baby unit to make the Parent unit sound  
AN ALERT TO HELP YOU lND IT IF ITꢄS BEEN MISPLACEDꢀ )F THE 0ARENT UNIT LOUDSPEAKER  
VOLUME HAD BEEN -UTED ꢂOR SET TO VOLUME OFF ꢁ THE VOLUME LEVEL WILL BE RESET TO  
THE DEFAULT SETTING OF ,EVEL ꢉꢀ  
1. Press  
on the Baby unit. The paging alert will sound at the Parent unit and  
the display will show Here I am!  
2. To stop the alert, press any button on the Parent unit or press the  
button  
again on the Baby unit. If no button is pressed after 2 minutes then the alert will  
automatically stop.  
Torch  
4HE 0ARENT UNIT HAS A HIGH INTENSITY WHITE ,%$ TORCH THAT CAN BE USED WHEN THE  
Parent unit is switched on or off.  
1. Press the  
on and off.  
button located on the back of the Parent unit to switch the Torch  
When the Torch is switched on it will automatically switch Mute All on as well. If you then press the  
BUTTON -UTE WILL BE DISABLED AND THE 4ORCH WILL REMAIN ONꢀ 7HEN THE 4ORCH IS SWITCHED OFFꢁ THE PREVIOUS  
Mute setting will be restored (No Mute, Mute All or Mute Low).  
USING YOUR DIGITAL BABY MONITOR 25  
The Parent unit menu  
The  
button on the Parent unit can be used to select and change settings on the  
"ABY UNIT WITHOUT HAVING TO RISK DISTURBING YOUR BABY9OU CAN ACCESS THE SETTINGS BYꢓ  
1. Press  
then press  
or  
to scroll through the menu options shown on  
when the option you want is displayed.  
the top of the display. Press  
ꢇꢀ 4HE lRST SUB MENU OPTION WILL BE DISPLAYEDꢁ PRESS  
to scroll through the  
options. The ( arrows) indicate when you can scroll either up or down. Press  
when the option you want is displayed.  
3. To exit the menu at any time, press  
at a time, or press and hold  
BRIEmY AND STEP BACK ONE MENU LEVEL  
to return to the idle screen. If no buttons are  
pressed for 10 seconds whilst accessing the menu, the display will return to idle  
AND ANY UNSAVED CHANGES WILL BE LOSTꢀ  
Nightlight  
9OU CAN SET A COMFORTING NIGHTLIGHT ON THE "ABY UNITꢀ 4HERE ARE ꢉ BRIGHTNESS LEVELS  
to choose from and you can set a period of time for the nightlight to illuminate.  
The Baby unit must be switched on for the nightlight to work, but need not be linked to the Parent unit.  
Switch nightlight on/off and select brightness level using the Baby unit  
1. To switch on, press the  
2. TPress REPEATEDLY TO SELECT THE BRIGHTNESS LEVELꢀ  
2. To switch off, press  
button.  
.
26 USING YOUR DIGITAL BABY MONITOR  
Switch nightlight on/off using the Parent unit  
1. To switch on, press the  
button. Nightlight is displayed, press  
.
2. Turn On? is displayed, press  
. Light On will briefly be displayed, then the  
icon.  
3. To switch off, press  
displayed, press  
will disappear.  
. Nightlight is displayed, press  
. Turn Off? is  
. Light Off will briefly be displayed and then the  
icon  
Select the nightlight brightness level using the Parent unit  
1. Press  
2. Press  
3. Press  
. Nightlight is displayed, press  
.
to display Brightness and press  
.
or  
to display either Low, Medium or High and press  
to  
select. The display will show Saved BRIEmY AND YOUꢄLL HEAR A CONlRMATION TONEꢀ  
The default setting is Medium.  
Set the nightlight timer  
1. Press  
2. Press  
3. Press  
. Nightlight is displayed, press  
.
to display Timer and press  
.
or  
to select.  
to display either 5 min, 10 min, 15 min or Constant and press  
The display will show Saved BRIEmY AND YOUꢄLL HEAR A CONlRMATION TONEꢀ  
The default setting is Constant.  
USING YOUR DIGITAL BABY MONITOR 27  
Play music from the Baby unit  
The Baby unit has eight songs that can be played to gently soothe your baby.  
9OU CAN SELECT ONE SONG TO PLAY REPEATEDLY OR SELECT THE 0LAY !LL OPTION FOR A  
medley of all eight songs. The songs can be set to play in a loop for 5, 10 or 15  
MINUTES OR YOU CAN LEAVE THEM PLAYING CONSTANTLYꢀ  
The default music setting is Play All songs Constantly.  
Turn music on/off using the Baby unit  
1. To turn the music on, press the  
button. The most recently selected song will  
start playing at the time period last selected using the Parent unit.  
2. Press the button repeatedly to change the pre-selected song.  
3. To turn the music off, press the  
button.  
!DJUST THE VOLUME OF THE MUSIC USING THE  
or  
buttons on the Baby unit.  
)F MUSIC IS PLAYED AT GREATER THAN VOLUME ꢉꢁ THE #RYING !LERT MAY ACTIVATE IF -UTE !LL IS USEDꢀ  
Turn music on/off using the Parent unit  
1. To turn the music on, press  
Music and press  
. Nightlight is displayed, press  
to display  
.
2. Play? is displayed, press  
name of the song and the  
unit.  
. The display will briefly show Music On, then the  
icon and the song will start to play on the Baby  
3. To turn the music off, press  
, press  
to display Music and press  
. The  
display will show Stop?, press  
. The display will show Music Off, the  
icon will disappear and the music will stop playing on the Baby unit.  
28 USING YOUR DIGITAL BABY MONITOR  
Choose a song to play using the Parent unit  
1. Press  
2. Play? is displayed, press  
ꢉꢀ 5SE THE  
. Nightlight is displayed, press  
to display Choose Song and press  
buttons to scroll through the eight song titles and Play All.  
when the option you want is displayed. The display will show Saved  
to display Music and press  
.
.
and  
Press  
BRIEmY AND YOUꢄLL HEAR A CONlRMATION TONEꢀ  
4HE EIGHT SONG CHOICES AREꢓ ꢉ "LIND -ICEꢁ "RAHMSꢁ #ANON IN $ꢁ $REAM #HASEꢁ $REAMINGꢁ (USH "ABYꢁ  
Night Night and Twinkle Star.  
Play All will play a medley of all eight songs.  
Set a play time for music  
1. Press  
2. Play? is displayed, press  
ꢉꢀ 5SE THE and buttons to scroll through the options: 5 min, 10 min, 15  
min or Constant and press when the option you want is displayed. The  
display will show Saved BRIEmY AND YOUꢄLL HEAR A CONlRMATION TONEꢀ  
. Nightlight is displayed, press  
to display Music and press  
.
until Timer is displayed and press  
.
USING YOUR DIGITAL BABY MONITOR 29  
Feed Timer  
9OU CAN SET A &EED 4IMER ON THE 0ARENT UNIT TO ACT AS A COUNTDOWN TIMER THAT  
WILL ALERT YOU WHEN YOU NEXT NEED TO FEED YOUR BABYꢀ 9OU HAVE A CHOICE OF ALERT  
TYPES ꢂBEEPꢁ BEEP ꢔ VIBE AND VIBRATE AND YOU CAN SET THE TIMER TO REPEAT ITSELF  
once the alert sounds.  
Set the feed timer countdown duration  
1. Press  
press  
. Nightlight is displayed, press  
.
until Feed Timer is displayed and  
2. Start? is displayed, press  
3. The display will show 02h:00m ꢂOR THE CURRENTLY SET TIMER ꢀ 5SE THE  
BUTTONS TO SELECT THE lRST DIGIT AND PRESS . Repeat this procedure for each  
. The display will show Saved AND YOUꢄLL HEAR A CONlRMATION  
to display Duration and press  
.
and  
digit and press  
beep.  
The timer can be set from 1 minute to 99 hours 59 minutes.  
The feed timer default countdown duration is set at 02:00 (2 hours).  
If the Parent unit is switched off, the feed timer countdown will be cancelled and you will need to start it  
again when the unit is switched back on. The duration, alert type and repeat settings will still be retained.  
30 USING YOUR DIGITAL BABY MONITOR  
Start the feed timer countdown  
1. Press  
press  
. Nightlight is displayed, press  
.
until Feed Timer is displayed and  
2. Start? is displayed, press  
. The display will briefly show Timer On and then  
the timer will be shown counting down the seconds from the time you set.  
7HEN THE TIMER HAS lNISHED COUNTING DOWN TO 00:00 you will hear an alert beep  
and the timer digits and  
icon will flash. Press any button on the Parent unit  
to stop the alert. If you do not stop the alert it will automatically stop after 2  
minutes (or it will start again if Timer Repeat has been set).  
Cancel the feed timer countdown  
1. Press  
press  
. Nightlight is displayed, press  
.
until Feed Timer is displayed and  
2. Stop? is displayed, press  
. The display will briefly show Timer Off , the  
timer will then disappear and the display will return to idle.  
USING YOUR DIGITAL BABY MONITOR 31  
Switch timer repeat option on or off  
1. Press  
press  
. Nightlight is displayed, press  
.
until Feed Timer is displayed and  
2. Start? is displayed, press  
3. 5SE THE and  
until Timer Repeat is displayed and press  
buttons to display either Repeat On or Repeat Off and press  
to select. The display will show Saved AND YOU WILL HEAR A CONlRMATION BEEPꢀ  
.
When Repeat On has been set, the feed timer countdown will start again once  
the alert has sounded if it is not switched off.  
The default setting is Repeat On.  
Select the type of feed timer alert  
1. Press  
press  
. Nightlight is displayed, press  
.
until Feed Timer is displayed and  
2. Start? is displayed, press  
until Alert is displayed and press  
buttons to display either Beep, Beep&Vibe or Vibrate  
to select. The display will show Saved and you will hear a  
.
3. 5SE THE  
and  
and press  
CONlRMATION BEEPꢀ  
Feed timer alert options:  
Beep = Parent unit will emit an alert beep only.  
Beep&Vibe ꢑ 0ARENT UNIT WILL EMIT AN ALERT BEEP AND VIBRATEꢀ  
Vibrate ꢑ 0ARENT UNIT WILL VIBRATE ONLYꢀ  
The default setting is Beep&Vibe.  
32 USING YOUR DIGITAL BABY MONITOR  
IMPORTANT  
4HE TEMPERATURE SENSOR USED IN THIS /RICOM $IGITAL "ABY -ONITOR IS INTENDED AS A  
GUIDEꢁ TO PROVIDE PARENTS WITH AN INDICATION OF THE ROOM TEMPERATURE IN WHICH THE  
Baby unit has been placed.  
It is designed to operate within an approximate tolerance of +/- 1°C and is not  
INTENDED TO BE AS ACCURATE AS SOME MEDICAL DEVICESꢀ 0LEASE NOTE THAT YOUR OWN  
temperature reference e.g. your central heating thermostat may not be as accurate,  
possibly due to tolerances and positioning of the thermostat in relation to the Baby  
Monitor sensor.  
(EALTHCARE PROFESSIONALS ADVISE THAT THE IDEAL TEMPERATURE FOR YOUR BABYꢄS ROOM IS  
between 16 °C and 20°C.  
9OUR 0ARENT UNIT HAS A BUILTꢐIN MECHANISM TO PREVENT REPEATED ANNOYING AUDIBLE ALERTS  
IF THE ROOM TEMPERATURE HOVERS AROUND AN ALERTING THRESHOLDꢀ  
Temperature monitor  
There is a temperature sensor on the Baby unit to constantly monitor the  
TEMPERATURE IN YOUR BABYꢄS ROOM AND YOUꢄLL BE ALERTED IF IT GETS TOO HOTꢁ TOO  
WARM OR TOO COLDꢀ 4HE 0ARENT UNIT WILL VIBRATEꢁ SOUND AN ALERT BEEP AND DISPLAY  
a message on the screen. The alerts on the Parent unit can be changed, see  
page 34. The temperature will be constantly shown on the Parent unit display in  
˚C. To stop an alert beep, press any button on the Parent unit.  
USING YOUR DIGITAL BABY MONITOR 33  
Temperature monitor indicators  
Temperature  
Below 16°C  
16 – 20°C  
21 – 24°C  
/VER ꢇꢒ #  
On the Parent unit  
$ISPLAY SHOWS Too Cold  
$ISPLAY SHOWS Too Warm  
$ISPLAY SHOWS Too Hot  
Select the type of temperature alert  
1. Press  
press  
. Nightlight is displayed, press  
until SetUp is displayed and  
.
2. Crying Alert is displayed, press  
until Temp Alert is displayed and press  
.
3. 5SE THE and  
buttons to display either Beep, Beep&Vibe, Vibrate,  
Screen Only or Off and press  
to select. The display will show Saved and  
YOU WILL HEAR A CONlRMATION BEEPꢀ  
To stop an alert beep, press any button on the Parent unit.  
34 USING YOUR DIGITAL BABY MONITOR  
Temperature alert options  
Beep = Parent unit will beep. icon will flash.  
Beep&Vibe ꢑ 0ARENT UNIT WILL BEEP AND VIBRATEꢀ icon will flash.  
Vibrate ꢑ 0ARENT UNIT WILL VIBRATEꢀ icon will flash.  
Screen Only = icon will flash.  
Off = No alerts. icon will not be displayed.  
!LL OF THE ABOVE ALERTS WILL ALSO DISPLAY THE APPROPRIATE MESSAGEꢓ Too Hot, Too  
Warm or Too Cold.  
Pre-set temperature alert range  
The Baby unit comes with pre-set maximum and minimum temperatures. If the temperature falls below  
OR GOES ABOVE THE SETTING AN ALERT WILL SOUND ON THE 0ARENT UNIT AND THE DISPLAY WILL SHOW Too Cold or  
Too Hot AS APPROPRIATEꢀ 4HE TEMPERATURE ALERT PREꢐSET TEMPERATURES ARE BELOW ꢈꢋ # AND ABOVE ꢇꢒ #ꢀ  
Alerts will be repeated if the temperature creeps by 2°C into an alerting range.  
The default setting is Beep&Vibrate.  
Crying alert  
4HE CRYING ALERT WILL ONLY BE ACTIVATED IF -UTE !LL HAS BEEN SWITCHED ON ꢂOR  
IF THE 0ARENT UNIT VOLUME HAS BEEN SWITCHED TO VOLUME OFF ꢁ SEE PAGE ꢇꢇ FOR  
information on the Mute All feature.  
With Mute All switched on, if your baby starts to cry you will not be able to hear  
THE CRIESꢁ BUT IF THE CRIES SOUND ABOVE A CERTAIN LEVEL IꢀEꢀ IF THEY REACH ꢌꢉD"!ꢁ  
WHICH IS THE ꢈST RED "ABY SOUND LEVEL ,%$ꢁ THEN THE 0ARENT UNIT WILL ACTIVATE THE  
CRYING ALERTꢀ 4HE DEFAULT CRYING ALERT IS FOR THE 0ARENT UNIT TO VIBRATE AND EMIT AN  
audible beep but you can select a different alert if you want to.  
USING YOUR DIGITAL BABY MONITOR 35  
Select the type of crying alert  
1. Press  
press  
. Nightlight is displayed, press  
until SetUp is displayed and  
.
2. Crying Alert is displayed, press  
3. 5SE THE and  
.
buttons to display either Beep, Beep&Vibe, Vibrate or  
Screen Only and press  
to select. The display will show Saved and you will  
HEAR A CONlRMATION BEEPꢀ  
To stop an alert beep, press any button on the Parent unit.  
Crying alert options  
Beep = Parent unit will beep, Crying Alert will be displayed and  
icon will flash.  
Beep&Vibe ꢑ 0ARENT UNIT WILL BEEP AND VIBRATEꢀ Crying Alert will be displayed and  
icon will flash.  
Vibrate ꢑ 0ARENT UNIT WILL VIBRATE ONLY ꢂNO ALERT BEEP WILL SOUND ꢀ Crying Alert will be displayed and the  
icon will flash.  
Screen Only = Crying Alert will be displayed and the  
icon will flash.  
The default setting is Beep&Vibrate.  
36 USING YOUR DIGITAL BABY MONITOR  
Backlight  
9OU CAN SELECT WHETHER OR NOT THE ,#$ BACKLIGHT COMES ON WHEN AN ALERT IS  
ACTIVATEDꢀ 7HEN THE BACKLIGHT COMES ON IT WILL STAY ON FOR ꢈꢏ SECONDSꢀ 4HE  
default setting is On.  
1. Press  
press  
. Nightlight is displayed, press  
until SetUp is displayed and  
.
2. Crying Alert is displayed, press  
until Backlight is displayed and press  
buttons to display either On w alerts or Off w alerts  
to select. The display will show Saved and you will hear a  
.
3. 5SE THE  
and  
and press  
CONlRMATION BEEPꢀ  
List of tones  
9OUR "ABY -ONITOR UNIT CAN PRODUCE VARIOUS TONESꢀ 4HEY HAVE THE FOLLOWING  
meaning:  
Tone  
Meaning  
Single tone  
$OUBLE TONE ꢂFAST  
#ONlRMATION TONE EꢀGꢀ SETTING SAVEDꢀ  
%RROR TONE EꢀGꢀ MAX VOLUME REACHED WHEN  
ADJUSTING VOLUMEꢀ  
$OUBLE TONE ꢂSLOW 5SER ALERT EꢀGꢀ CRYING ALERTꢁ PAGING ALERT ETCꢀ  
Triple tone (fast) System alert e.g. link lost, battery low etc.  
USING YOUR DIGITAL BABY MONITOR 37  
5SER !LERT TONES CAN BE SILENCED BY PRESSING ANY BUTTON ON THE 0ARENT UNITꢀ  
System Alerts can be silenced for a 5 minute period by pressing any button on  
the Parent unit.  
Reset the units  
Resetting either units will return the settings at that unit back to its default  
settings.  
2ESETTING THE UNITS IS ONLY ADVISABLE IF YOU ARE EXPERIENCING DIFlCULTIES WITH YOUR PRODUCTꢀ )T IS A USEFUL  
feature that ensures your Baby Monitor is returned to its new “out of the box” settings.  
Reset the Parent unit  
1. Within 3 seconds of the Parent unit being switched on, press and hold the  
button for at least 10 seconds. The display will show Reset for 2 seconds during  
THE RESET AND THEN YOU WILL HEAR A CONlRMATION BEEP ONCE THE RESET HAS BEEN  
performed.  
Reset the Baby unit  
1. Within 3 seconds of the Baby unit being switched on, press the  
least 10 seconds.  
button for at  
9OU WILL HEAR A CONlRMATION BEEP ONCE THE RESET HAS BEEN PERFORMEDꢀ  
38 TROUBLESHOOTING  
Should you experience difficulties operating the SC510 please refer to the  
TROUBLESHOOTING GUIDE BELOWꢀ )F YOU STILL EXPERIENCE DIFlCULTIES PLEASE CONTACT /RICOM  
Customer Support on 1300 889 785 for assistance.  
Troubleshooting  
Problems  
Solutions  
Link light does not ¥ #HECK THAT BOTH THE "ABY AND 0ARENT UNITS ARE  
come on  
switched on.  
¥ #HECK THAT THE BATTERIES IN THE 0ARENT UNIT ARE CORRECTLY  
installed and that they are charged.  
¥ #HECK THAT THE MAINS POWER IS PLUGGED IN AND  
switched on at the Baby unit.  
¥ #HECK THAT THE UNITS ARE WITHIN RANGE OF EACH OTHERꢀ  
Link light is flashing ¥ )F YOU HAVE PRESSED  
to use the Talk Back  
green  
feature, the Link light will flash to indicate one-way  
communication between the units.  
¥ 4HE UNITS ARE SEARCHING FOR A COMMUNICATION LINKꢀ  
¥ #HECK UNITS ARE WITHIN RANGE OF ONE ANOTHERꢀ  
¥ #HECK BOTH UNITS ARE TURNED ONꢀ  
Link indicator is  
flashing red  
¥ 4HE LINK BETWEEN YOUR UNITS IS BROKENꢀ 9OU WILL ALSO  
hear an alert on the Parent unit to let you know  
there is no communication between the units. If this  
happens, check that the mains power (or batteries) is  
correctly connected and that the units are within range  
of one another. See page 17 for instructions on linking  
the units.  
TROUBLESHOOTING 39  
Battery low on  
Parent unit  
¥ 0UT THE 0ARENT UNIT BACK ON THE CHARGER TO CHARGEꢀ  
¥ 0LACE 0ARENT UNIT BACK ON THE CHARGER AS FREQUENTLY  
AS POSSIBLE OR IDEALLY LEAVE IT ON THE CHARGER TO ENSURE  
the batteries remain charged.  
¥ 4O SHORTEN THE CHARGING TIME YOU CAN TURN THE 0ARENT  
unit off if it is not being used while it is charging.  
Parent unit remains ¥ 9OU MAY HAVE SET THE VOLUME TOO LOWꢁ SEE PAGE ꢇꢇ TO  
SILENT OR VERY QUIET  
INCREASE THE VOLUMEꢀ  
¥ 9OU MAY HAVE SWITCHED A -UTE FEATURE ONꢁ SEE PAGES  
22.  
9OU CAN HEAR A HIGH ¥ 4HE UNITS MIGHT BE TOO CLOSE TO EACH OTHERꢀ  
pitched noise ¥ 4HE VOLUME SETTING MIGHT BE TOO HIGHꢁ SEE PAGE ꢇꢈꢀ  
Talk back feature is ¥ #HECK THAT THE VOLUME IS LOUD ENOUGH AT THE "ABY UNITꢁ  
not working  
see page 21.  
¥ #HECK THE UNITS ARE LINKEDꢁ SEE PAGE ꢈꢎꢀ  
40 CUSTOMER SUPPORT  
Customer Support  
)F YOU HAVE ANY PROBLEMS SETTING UP OR USING THIS PRODUCT YOU WILL lND USEFUL  
tips and information in the Troubleshooting section of this user guide as well as  
)F YOU HAVE FURTHER QUESTIONS ABOUT USING THE PRODUCT AFTER REVIEWING THE  
RESOURCES ABOVE OR WOULD LIKE TO PURCHASE REPLACEMENT PARTS OR ACCESSORIES  
please call our Customer Support Team. Our dedicated local support team  
are more likely to be able to help you than the retailer where you made your  
purchase.  
Importan  
t
Please retain your purchase receipt and attach to the back page of this user  
GUIDE AS YOU WILL NEED TO PRODUCE THIS IF WARRANTY SERVICE IS REQUIREDꢀ 4AKE A  
WARRANTY 41  
How to make a claim under Warranty in Australia  
Oricom has a simple warranty process for you to follow:  
s 0LEASE CALL OR EMAIL OUR #USTOMER 3UPPORT 4EAMꢁ CONTACT DETAILS FOLLOWꢀ  
s ! #USTOMER 3UPPORT 4EAM MEMBER WILL VERIFY AFTER TROUBLESHOOTING WITH YOU  
IF YOUR PRODUCT QUALIlES UNDER WARRANTY)F SOꢁ THEY WILL GIVE YOU A 0RODUCT  
Return Authorisation number.  
s 7E WILL THEN EMAIL OR FAX A 2ETURN !UTHORISATION FORM AND A 2EPAIR .OTICE  
(if necessary), together with instructions on how to return the goods for  
WARRANTY SERVICEꢀ  
0LEASE NOTE THAT IF A #USTOMER 3UPPORT 4EAM MEMBER ADVISES THAT YOUR PRODUCT  
does not qualify for return, this warranty does not apply to your product.  
Products that are authorised to be returned to Oricom in Australia must include  
all of the following:  
s ! COMPLETED 2ETURN !UTHORISATION FORM  
s ! COPY OF YOUR 0ROOF OF 0URCHASE ꢂPLEASE KEEP YOUR ORIGINAL COPY  
s 4HE FAULTY PRODUCTꢁ INCLUDING ALL ACCESSORIESꢁ 3END THE APPROVED RETURNS TOꢓ  
Oricom International Pty Ltd  
Locked Bag 658  
South Windsor NSW 2756 Australia  
Please note that this warranty excludes expenses incurred by you in returning  
ANY FAULTY PRODUCT TO USꢀ 9OU MUST ARRANGE AND PAY ANY EXPENSES INCURRED  
ꢂINCLUDING POSTAGEꢁ DELIVERYFREIGHTꢁ TRANSPORTATION OR INSURANCE OF THE PRODUCT  
TO RETURN THE FAULTY PRODUCT TO USꢁ HOWEVERꢁ WE WILL ARRANGE DELIVERY OF THE  
repaired or replaced faulty product to you.  
42 WARRANTY  
Important Information  
Repair Notice  
Please be aware that the repair of your goods may result in the loss of any  
user-generated data (such as stored telephone numbers, text messages and  
CONTACT INFORMATION ꢀ 0LEASE ENSURE THAT YOU HAVE MADE A COPY OF ANY DATA  
SAVED ON YOUR GOODS BEFORE SENDING FOR REPAIRꢀ  
Please also be aware that goods presented for repair may be replaced by  
refurbished goods or parts of the same type rather than being repaired.  
WARRANTY 43  
Warranty Information (Australia)  
4HIS 7ARRANTY IS PROVIDED BY /RICOM )NTERNATIONAL 0TY ,TD !". ꢒꢋ ꢊꢌꢋ ꢈꢈꢋ ꢉꢋꢍꢁ  
5NIT ꢈꢁ ꢒ 3OVEREIGN 0LACEꢁ 3OUTH 7INDSOR .37 ꢇꢎꢏꢋꢁ HEREIN AFTER REFERRED TO  
as “Oricom”.  
Oricom makes no other warranties or conditions, express or implied, including  
AS TO ACCEPTABLE QUALITY AND lTNESS FOR A PARTICULAR PURPOSEꢁ EXCEPT AS STATED IN  
this Warranty. Any implied warranties that may be imposed by law are limited in  
duration to the Warranty Period.  
Oricom warrants that the product is free from defects in materials or  
workmanship during the Warranty Period. This Warranty does not extend to any  
PRODUCT FROM WHICH THE SERIAL NUMBER HAS BEEN REMOVED OR WAS PURCHASED  
outside of Australia.  
This warranty in no way affects your statutory warranty rights under the  
Competition and Consumer Act 2010 or any other similar legislation.  
The Warranty Period will be 3 years from the date of purchase of the product  
EVIDENCED BY YOUR DATED SALES RECEIPTꢀ 9OU ARE REQUIRED TO PROVIDE PROOF OF  
PURCHASE AS A CONDITION OF RECEIVING WARRANTY SERVICESꢀ  
9OU ARE ENTITLED TO A REPLACEMENT PRODUCT OR REPAIR OF THE PRODUCT ACCORDING TO  
the terms and conditions of this document if your product is found to be faulty  
within the Warranty Period. This Warranty extends to the original purchaser only  
and is not transferable. Rechargeable battery cells and rechargeable battery  
PACKS ꢂIF SUPPLIED WITH THIS PRODUCT ARE COVERED UNDER THIS WARRANTY FOR A PERIOD  
of 90 days.  
44 WARRANTY  
Products distributed by Oricom are manufactured using new materials or new  
AND USED MATERIALS EQUIVALENT TO NEW IN PERFORMANCE AND RELIABILITY3PARE PARTS  
MAY BE NEW OR EQUIVALENT TO NEWꢀ 3PARE PARTS ARE WARRANTED TO BE FREE FROM  
defects in material or workmanship for thirty (30) days or for the remainder of  
the Warranty Period of the Oricom branded product in which they are installed,  
WHICHEVER IS LONGERꢀ $URING THE 7ARRANTY 0ERIODꢁ /RICOM WILL WHERE POSSIBLE  
repair and if not replace the faulty product or part thereof. All component parts  
REMOVED UNDER THIS 7ARRANTY BECOME THE PROPERTY OF /RICOMꢀ )N THE UNLIKELY  
EVENT THAT YOUR /RICOM PRODUCT HAS A RECURRING FAILUREꢁ /RICOM MAYSUBJECT TO  
THE #OMPETITION AND #ONSUMER !CT ꢇꢊꢈꢊꢁ AT ITS DISCRETIONꢁ ELECT TO PROVIDE YOU  
WITH A REPLACEMENT PRODUCT OF ITS CHOOSING THAT IS AT LEAST EQUIVALENT TO YOUR  
product in performance.  
Oricom does not warrant that the operation of the product will be uninterrupted  
or error free.  
Oricom is not responsible for damage that occurs as a result of your failure to  
follow the instructions that came with the product. These terms and conditions  
together with any specific terms and conditions contained in the user guide  
TO THE PRODUCT PURCHASED CONSTITUTE THE COMPLETE AND EXCLUSIVE AGREEMENT  
between you and Oricom regarding the product.  
.O CHANGE TO THE CONDITIONS OF THIS 7ARRANTY IS VALID UNLESS IT IS MADE IN WRITING  
AND SIGNED BY AN AUTHORISED REPRESENTATIVE OF /RICOMꢀ  
/RICOM WILL NOT BE IN BREACH OF A WARRANTY EXPRESSLY SET OUT IN THIS 5SER 'UIDE  
or under the Competition and Consumer Act 2010 and excludes any liability  
for damages or any other remedy arising under any other legislation or the  
common law if the damage occurs as a result of:  
WARRANTY 45  
1. failure by you to adhere to the warnings and follow the instructions set out in  
this user guide for the proper installation and use of the product;  
2. negligence on your part or misuse by you of the product;  
3. an uncontrollable external cause which results in the product not functioning  
INCLUDING BUT NOT LIMITED TO POWER FAILUREꢁ LIGHTNING OR OVER VOLTAGEꢕ AND  
ꢒꢀ MODIlCATION TO THE PRODUCT OR SERVICES CARRIED OUT ON THE PRODUCTION BY ANYONE  
OTHER THAN /RICOM OR /RICOMꢄS AUTHORISED SERVICE PROVIDERꢀ  
Oricom will not be liable for any damages caused by the product or the failure  
OF THE PRODUCT TO PERFORMꢁ INCLUDING ANY LOST PROFITS OR SAVINGS OR SPECIALꢁ  
incidental or consequential damages. Oricom is not liable for any claim made by  
a third party or made by you on behalf of a third party. This limitation of liability  
applies whether damages are sought, or a claim made, under this Warranty or  
as a tort claim (including negligence and strict product liability), a contract claim  
OR ANY OTHER CLAIMꢀ (OWEVERꢁ THIS LIMITATION OF LIABILITY WILL NOT APPLY TO CLAIMS  
FOR PERSONAL INJURY.OTHING IN THIS 7ARRANTY EXCLUDESꢁ RESTRICTS OR MODIlES ANY  
condition, warranty, right or remedy which pursuant to the Competition and  
Consumer Act 2010 applies to this Warranty and which may not be so excluded,  
restricted or modified. For warranties that cannot be excluded, restricted or  
MODIlEDꢁ /RICOM LIMITS THE REMEDIES AVAILABLE TO THOSE SPECIlED IN THE RELEVANT  
legislation.  
Oricom products come with guarantees that cannot be excluded under the  
!USTRALIAN #ONSUMER ,AWꢀ 9OU ARE ENTITLED TO A REPLACEMENT OR REFUND FOR A MAJOR  
failure and compensation for any other reasonably foreseeable loss or damage.  
9OU ARE ALSO ENTITLED TO HAVE THE GOODS REPAIRED OR REPLACED IF THE GOODS FAIL TO BE  
OF ACCEPTABLE QUALITY AND THE FAILURE DOES NOT AMOUNT TO A MAJOR FAILUREꢀ  
Contact Details for Oricom support and Warranty claims in Australia  
Oricom International Pty Ltd  
Locked Bag 658  
South Windsor, NSW 2756  
Australia  
Phone: 1300 889 785  
(Monday to Friday 8am to 6pm AEST)  
Fax: (02) 4574 8898  
Contact details for Oricom Support and Warranty Claims in New Zealand  
Phone: 0800 674 266  
(Monday to Friday 10am to 8pm NZST)  
Ref: 07092011  

Xerox X2 User Manual
Whirlpool Bhac1000xs0 User Manual
Universal Electronics 3 Stage Switch Mode Sla Charger 24bc5000tu User Manual
Toshiba Air Conditioner Rav Sm562ut E User Manual
Sharp All In One Printer Mx 3500n User Manual
Porter Cable Pcg2200 User Manual
Polar Automobile Parts Fin 90440 Kempele User Manual
KENWOOD KVC65 02 User Manual
HANSGROHE AXOR MONTREUX 16815XX1 User Manual
CRAFTSMAN 536.887993 User Manual